Search Results

Search found 10482 results on 420 pages for 'virtual lab'.

Page 332/420 | < Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >

  • Abstract class and operator!= in c++

    - by Alessandro Teruzzi
    Hi All, I have problem implementing the operator!= in a set class deriving from an abstact one. The code looks like this: class Abstract { public: //to make the syntax easier let's use a raw pointer virtual bool operator!=(const Abstract* other) = 0; }; class Implementation { SomeObject impl_; //that already implement the operator!= public: bool operator!=(const Abstract* other) { return dynamic_cast<Implementation*>(other)->impl_ != this->impl_; } }; This code works but it has the drawback to use dynamic_cast and I need to handle error in casting operation. This is a generic problem that occur when a function of a concrete class it is trying to using some internal information (not available at the abstract class level) to perform a task. Is there any better way to solve this kind of problem? Cheers

    Read the article

  • How can i get my htaccess to work (subdomains)?

    - by user358994
    I'm sorta a noob at these things but I'm trying to make a simple virtual subdomain with .htaccess. I have wildcard enabled and after lots of digging, this is what I've come up with: rewriteEngine On rewriteCond %{HTTP_HOST} !^$ rewriteCond %{HTTP_HOST} !^(www\.)?khpedia\.com$ [NC] rewriteCond %{HTTP_HOST}<->%{REQUEST_URI} ^(www\.)?([^.]+).*<->/([^/]+) [NC] rewriteCond %2<->%3 !^(.*)<->\1$ [NC] rewriteRule ^(.+) /%2/$1 [L] My directory is setup as -root --wiki ----index.php --test Right now when I travel to wiki.khpedia.com, I get a page not found. When I travel to wiki.khpedia.com/index.php, it travels to wiki.khpedia.com/wiki/index.php. I am somehow also able to access wiki.khpedia.com/test. If it doesnt seem obvious yet, I want to be able to go to wiki.khpedia.com/index.php and see wiki.khpedia.com/wiki/index.php but not in my address bar. Sorry for the text block and thanks for the help.

    Read the article

  • base pointer to derived class

    - by Jay
    Suppose there are Base class and Derived class. Base *A = new Base; Here A is a pointer point to Base class, and new constructs one that A points to. I also saw Base *B = new Derived; How to explain this? B is a pointer to Base Class, and a Derived class constructed and pointed by B? If there is a function derived from Base class, say, Virtual void f(), and it's been overridden in Derived class, then B->f() will invoke which version of the function? version in Base class, or version that overridden in Derived Class. What if there is a new function void g()in Derived, is B->g() going to invoke this function properly? One more is, is int *a = new double; or int *a = new int; legal?

    Read the article

  • C# setting case constant expressions, do they have to follow a specific order?

    - by Umeed
    Say I'm making a simple program, and the user is in the menu. And the menu options are 1 3 5 7 (i wouldn't actually do that but lets just go with it). and I want to make my switch statement using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace DecisionMaking2 { class Program { static void Main(string[] args) { Console.WriteLine("Please choose an option: "); string SelectedOpt = Console.ReadLine(); double Selection = Convert.ToDouble(SelectedOpt); double MenuOption = (Selection); switch (MenuOption) { case 1: Console.WriteLine("Selected option #1"); break; case 2: Console.WriteLine("Selected option #3"); break; case 3: Console.WriteLine("Selected option #5"); break; case 4: Console.WriteLine("Selected option #7"); break; default: Console.WriteLine("Please choose from the options List!"); break; } } } } would that work? or would I have to name each case constant expression the option number I am using? I went to the microsoft website and I didn't quite pick up on anything i was looking for. . Also while I have your attention, how would I make it so the user chooses from either option and because I don't know which option the user will select " double MenuOption = " could be anything, whatever the user inputs right? so would what I have even work? I am doing this all by hand, and don't get much lab time to work on this as I have tons of other courses to work on and then a boring job to go to, and my PC at home has a restarting issue lol. soo any and all help is greatly appreciated. p.s the computer I'm on right now posting this, doesn't have any compilers, coding programs, and it's not mine just to get that out of the way. Thanks again!

    Read the article

  • How to inherit from a generic parameter?

    - by Bob
    I'm basically wanting to do this: class UILockable<T> : T where T : UIWidget { } However, this doesn't work. I've seen people recommend that you do this: class UILockable<T> where T : UIWidget { private T _base; } This would require me to override each function UILockable would need and forward it to T. This is impossible since T may derive from UIWidget and have unique abstract/virtual methods of its own. Is there no way to simply inherit from T?

    Read the article

  • Why delegate types are derived from MulticastDelegate class why not it directly derive from Delegate class?

    - by Vijay
    I have a very basic question regarding delegate types. I compared the memebers of Delegate and MulticastDelegate classes in object browser and I couldn't find any new additional member present in MulticastDelegate. I also noticed that the Delegate class has GetInvocationList virtual method. So I assume that the Delegate class should have the capability to hold references to multiple methods. If my assumption is correct I wonder why not custom delegate types directly derive from the Delegate class instead of MulticastDelegate class. Not sure what I am missing here. Please help me understand the difference.

    Read the article

  • When is "this" pointer initialized in C++?

    - by skydoor
    Hi I have a question about this pointer, when an object is constructed, when it is initialized? Which means, when can I use it? The virtual table is constructed in the constructor, is the same with this pointer? For example, I have a code like this. The output is 8. Does it mean that before the constructor is entered, this pointer is already initialized? class A{ public: A() { cout<<sizeof(*this);} int i; int *p; }; int main() { A a; } If it is true, what else would happen before the constructor is entered? If it is not true, when is the this pointer initialized?

    Read the article

  • How to search for a file or directory in Linux Ubuntu machine

    - by Jury A
    I created an EC2 instance (Ubuntu 64 bit) and attached a volume from a publicly available snapshot to the instance. I successfully mounted the volume. I am supposed to be able to run a script from this attached volume using the following steps as explained in the tutorial: Log in to your virtual machine. mkdir /space mount /dev/sdf1 /space cd /space ./setup-script The problem is that, when I try: ./setup-script I got the following message: -bash: ./setup-script: No such file or directory What is the problem ? How can I search for the ./setup-script in the whole machine ? I'm not very familiar with linux system. Please, help. For more details about the issue: Look at my previous post: Error when mounting drive

    Read the article

  • sending an url but staying on the same page ( php, codeigniter, javascript )

    - by user1776815
    this is my situation. I'm writing an webinterface in codeigniter to send commands to a virtual server. these commands are passed through the browser in an url. example : http://server.com/TgtSendIRCommand?id=UM-02&code=KEY_UP this server then takes action and the web interface refreshes the screenshot. i just want to have a bunch of links in html that send this command to the browser. But if i click the links, the user has to stay on the same page. So the command is sended but there is no other interaction. i am using codeigniter. Any suggestions ?

    Read the article

  • Qt : crash due to delete (trying to handle exceptions...)

    - by Seub
    I am writing a program with Qt, and I would like it to show a dialog box with a Exit | Restart choice whenever an error is thrown somewhere in the code. What I did causes a crash and I really can't figure out why it happens, I was hoping you could help me understanding what's going on. Here's my main.cpp: #include "my_application.hpp" int main(int argc, char *argv[]) { std::cout << std::endl; My_Application app(argc, argv); return app.exec(); } And here's my_application:hpp: #ifndef MY_APPLICATION_HPP #define MY_APPLICATION_HPP #include <QApplication> class Window; class My_Application : public QApplication { public: My_Application(int& argc, char ** argv); virtual ~My_Application(); virtual bool notify(QObject * receiver, QEvent * event); private: Window *window_; void exit(); void restart(); }; #endif // MY_APPLICATION_HPP Finally, here's my_application.cpp: #include "my_application.hpp" #include "window.hpp" #include <QMessageBox> My_Application::My_Application(int& argc, char ** argv) : QApplication(argc, argv) { window_ = new Window; window_->setAttribute(Qt::WA_DeleteOnClose, false); window_->show(); } My_Application::~My_Application() { delete window_; } bool My_Application::notify(QObject * receiver, QEvent * event) { try { return QApplication::notify(receiver, event); } catch(QString error_message) { window_->setEnabled(false); QMessageBox message_box; message_box.setWindowTitle("Error"); message_box.setIcon(QMessageBox::Critical); message_box.setText("The program caught an unexpected error:"); message_box.setInformativeText("What do you want to do? <br>"); QPushButton *restart_button = message_box.addButton(tr("Restart"), QMessageBox::RejectRole); QPushButton *exit_button = message_box.addButton(tr("Exit"), QMessageBox::RejectRole); message_box.setDefaultButton(restart_button); message_box.exec(); if ((QPushButton *) message_box.clickedButton() == exit_button) { exit(); } else if ((QPushButton *) message_box.clickedButton() == restart_button) { restart(); } } return false; } void My_Application::exit() { window_->close(); //delete window_; return; } void My_Application::restart() { window_->close(); //delete window_; window_ = new Window; window_->show(); return; } Note that the line window_->setAttribute(Qt::WA_DeleteOnClose, false); means that window_ (my main window) won't be deleted when it is closed. The code I've written above works, but as far as I understand, there's a memory leak: I should uncomment the line //delete window_; in My_Application::exit() and My_Application::restart(). But when I do that, the program crashes when I click restart (or exit but who cares). (I'm not sure this is useful, in fact it might be misleading, but here's what my debugger tells me: a segmentation fault occurs in QWidgetPrivate::PaintOnScreen() const which is called by a function called by a function... called by My_Application::notify()) When I do some std::couts, I notice that the program runs through the entire restart() function and in fact through the entire notify() function before it crashes. I have no idea why it crashes. Thanks in advance for your insights! Update: I've noticed that My_Application::notify() is called very often. For example, it is called a bunch of times while the error dialog box is open, also during the execution of the restart function. The crash actually occurs in the subfunction QApplication::notify(receiver, event). This is not too surprising in light of the previous remark (the receiver has probably been deleted) But even if I forbid the function My_Application::notify() to do anything while restart() is executed, it still crashes (after having called My_Application::notify() a bunch of times, like 15 times, isn't that weird)? How should I proceed? Maybe I should say (to make the question slightly more relevant) that my class My_Application also has a "restore" function, which I've not copied here to try to keep things short. If I just had that restart feature I wouldn't bother too much, but I do want to have that restore feature. I should also say that if I keep the code with the "delete window_" commented, the problem is not only a memory leak, it still crashes sometimes apparently. There must surely be a way to fix this! But I'm clueless, I'd really appreciate some help! Thanks in advance.

    Read the article

  • What to do with "Default Web Site" on a Japanese OS? (E.G: ??? Web ???)

    - by Mike Atlas
    I'm currently in the process of upgrading old II6 automation scripts that use the iisvdir tool to create/modify/update apps and virtual directories. The IIS6 "iisvdir" commands reference paths in IIS6 that are from the metabase, eg, "/W3SVC/1/ROOT/MyApp" - where 1 is the "Default" website. The command doesn't actually require the display name of the site to make changes to it. With an English OS, the "Default Web Site" site name is fine for usage in AppCmd, but if the OS is Japanese, it will be named: "??? Web ???" So how can I script AppCmd to refer to sites, vdirs and apps using language neutral identifiers to reference the "Default App Site"? (Disclosure: I only have a IIS7-English machine that I am working on currently, but I have both IIS6-English and IIS6-Japanese machines for testing my old scripts - so perhaps it really is just "Default Web Site" still on Win2k8-Japanese?)

    Read the article

  • Rendering ASP.NET MVC Views to String

    - by Rick Strahl
    It's not uncommon in my applications that I require longish text output that does not have to be rendered into the HTTP output stream. The most common scenario I have for 'template driven' non-Web text is for emails of all sorts. Logon confirmations and verifications, email confirmations for things like orders, status updates or scheduler notifications - all of which require merged text output both within and sometimes outside of Web applications. On other occasions I also need to capture the output from certain views for logging purposes. Rather than creating text output in code, it's much nicer to use the rendering mechanism that ASP.NET MVC already provides by way of it's ViewEngines - using Razor or WebForms views - to render output to a string. This is nice because it uses the same familiar rendering mechanism that I already use for my HTTP output and it also solves the problem of where to store the templates for rendering this content in nothing more than perhaps a separate view folder. The good news is that ASP.NET MVC's rendering engine is much more modular than the full ASP.NET runtime engine which was a real pain in the butt to coerce into rendering output to string. With MVC the rendering engine has been separated out from core ASP.NET runtime, so it's actually a lot easier to get View output into a string. Getting View Output from within an MVC Application If you need to generate string output from an MVC and pass some model data to it, the process to capture this output is fairly straight forward and involves only a handful of lines of code. The catch is that this particular approach requires that you have an active ControllerContext that can be passed to the view. This means that the following approach is limited to access from within Controller methods. Here's a class that wraps the process and provides both instance and static methods to handle the rendering:/// <summary> /// Class that renders MVC views to a string using the /// standard MVC View Engine to render the view. /// /// Note: This class can only be used within MVC /// applications that have an active ControllerContext. /// </summary> public class ViewRenderer { /// <summary> /// Required Controller Context /// </summary> protected ControllerContext Context { get; set; } public ViewRenderer(ControllerContext controllerContext) { Context = controllerContext; } /// <summary> /// Renders a full MVC view to a string. Will render with the full MVC /// View engine including running _ViewStart and merging into _Layout /// </summary> /// <param name="viewPath"> /// The path to the view to render. Either in same controller, shared by /// name or as fully qualified ~/ path including extension /// </param> /// <param name="model">The model to render the view with</param> /// <returns>String of the rendered view or null on error</returns> public string RenderView(string viewPath, object model) { return RenderViewToStringInternal(viewPath, model, false); } /// <summary> /// Renders a partial MVC view to string. Use this method to render /// a partial view that doesn't merge with _Layout and doesn't fire /// _ViewStart. /// </summary> /// <param name="viewPath"> /// The path to the view to render. Either in same controller, shared by /// name or as fully qualified ~/ path including extension /// </param> /// <param name="model">The model to pass to the viewRenderer</param> /// <returns>String of the rendered view or null on error</returns> public string RenderPartialView(string viewPath, object model) { return RenderViewToStringInternal(viewPath, model, true); } public static string RenderView(string viewPath, object model, ControllerContext controllerContext) { ViewRenderer renderer = new ViewRenderer(controllerContext); return renderer.RenderView(viewPath, model); } public static string RenderPartialView(string viewPath, object model, ControllerContext controllerContext) { ViewRenderer renderer = new ViewRenderer(controllerContext); return renderer.RenderPartialView(viewPath, model); } protected string RenderViewToStringInternal(string viewPath, object model, bool partial = false) { // first find the ViewEngine for this view ViewEngineResult viewEngineResult = null; if (partial) viewEngineResult = ViewEngines.Engines.FindPartialView(Context, viewPath); else viewEngineResult = ViewEngines.Engines.FindView(Context, viewPath, null); if (viewEngineResult == null) throw new FileNotFoundException(Properties.Resources.ViewCouldNotBeFound); // get the view and attach the model to view data var view = viewEngineResult.View; Context.Controller.ViewData.Model = model; string result = null; using (var sw = new StringWriter()) { var ctx = new ViewContext(Context, view, Context.Controller.ViewData, Context.Controller.TempData, sw); view.Render(ctx, sw); result = sw.ToString(); } return result; } } The key is the RenderViewToStringInternal method. The method first tries to find the view to render based on its path which can either be in the current controller's view path or the shared view path using its simple name (PasswordRecovery) or alternately by its full virtual path (~/Views/Templates/PasswordRecovery.cshtml). This code should work both for Razor and WebForms views although I've only tried it with Razor Views. Note that WebForms Views might actually be better for plain text as Razor adds all sorts of white space into its output when there are code blocks in the template. The Web Forms engine provides more accurate rendering for raw text scenarios. Once a view engine is found the view to render can be retrieved. Views in MVC render based on data that comes off the controller like the ViewData which contains the model along with the actual ViewData and ViewBag. From the View and some of the Context data a ViewContext is created which is then used to render the view with. The View picks up the Model and other data from the ViewContext internally and processes the View the same it would be processed if it were to send its output into the HTTP output stream. The difference is that we can override the ViewContext's output stream which we provide and capture into a StringWriter(). After rendering completes the result holds the output string. If an error occurs the error behavior is similar what you see with regular MVC errors - you get a full yellow screen of death including the view error information with the line of error highlighted. It's your responsibility to handle the error - or let it bubble up to your regular Controller Error filter if you have one. To use the simple class you only need a single line of code if you call the static methods. Here's an example of some Controller code that is used to send a user notification to a customer via email in one of my applications:[HttpPost] public ActionResult ContactSeller(ContactSellerViewModel model) { InitializeViewModel(model); var entryBus = new busEntry(); var entry = entryBus.LoadByDisplayId(model.EntryId); if ( string.IsNullOrEmpty(model.Email) ) entryBus.ValidationErrors.Add("Email address can't be empty.","Email"); if ( string.IsNullOrEmpty(model.Message)) entryBus.ValidationErrors.Add("Message can't be empty.","Message"); model.EntryId = entry.DisplayId; model.EntryTitle = entry.Title; if (entryBus.ValidationErrors.Count > 0) { ErrorDisplay.AddMessages(entryBus.ValidationErrors); ErrorDisplay.ShowError("Please correct the following:"); } else { string message = ViewRenderer.RenderView("~/views/template/ContactSellerEmail.cshtml",model, ControllerContext); string title = entry.Title + " (" + entry.DisplayId + ") - " + App.Configuration.ApplicationName; AppUtils.SendEmail(title, message, model.Email, entry.User.Email, false, false)) } return View(model); } Simple! The view in this case is just a plain MVC view and in this case it's a very simple plain text email message (edited for brevity here) that is created and sent off:@model ContactSellerViewModel @{ Layout = null; }re: @Model.EntryTitle @Model.ListingUrl @Model.Message ** SECURITY ADVISORY - AVOID SCAMS ** Avoid: wiring money, cross-border deals, work-at-home ** Beware: cashier checks, money orders, escrow, shipping ** More Info: @(App.Configuration.ApplicationBaseUrl)scams.html Obviously this is a very simple view (I edited out more from this page to keep it brief) -  but other template views are much more complex HTML documents or long messages that are occasionally updated and they are a perfect fit for Razor rendering. It even works with nested partial views and _layout pages. Partial Rendering Notice that I'm rendering a full View here. In the view I explicitly set the Layout=null to avoid pulling in _layout.cshtml for this view. This can also be controlled externally by calling the RenderPartial method instead: string message = ViewRenderer.RenderPartialView("~/views/template/ContactSellerEmail.cshtml",model, ControllerContext); with this line of code no layout page (or _viewstart) will be loaded, so the output generated is just what's in the view. I find myself using Partials most of the time when rendering templates, since the target of templates usually tend to be emails or other HTML fragment like output, so the RenderPartialView() method is definitely useful to me. Rendering without a ControllerContext The preceding class is great when you're need template rendering from within MVC controller actions or anywhere where you have access to the request Controller. But if you don't have a controller context handy - maybe inside a utility function that is static, a non-Web application, or an operation that runs asynchronously in ASP.NET - which makes using the above code impossible. I haven't found a way to manually create a Controller context to provide the ViewContext() what it needs from outside of the MVC infrastructure. However, there are ways to accomplish this,  but they are a bit more complex. It's possible to host the RazorEngine on your own, which side steps all of the MVC framework and HTTP and just deals with the raw rendering engine. I wrote about this process in Hosting the Razor Engine in Non-Web Applications a long while back. It's quite a process to create a custom Razor engine and runtime, but it allows for all sorts of flexibility. There's also a RazorEngine CodePlex project that does something similar. I've been meaning to check out the latter but haven't gotten around to it since I have my own code to do this. The trick to hosting the RazorEngine to have it behave properly inside of an ASP.NET application and properly cache content so templates aren't constantly rebuild and reparsed. Anyway, in the same app as above I have one scenario where no ControllerContext is available: I have a background scheduler running inside of the app that fires on timed intervals. This process could be external but because it's lightweight we decided to fire it right inside of the ASP.NET app on a separate thread. In my app the code that renders these templates does something like this:var model = new SearchNotificationViewModel() { Entries = entries, Notification = notification, User = user }; // TODO: Need logging for errors sending string razorError = null; var result = AppUtils.RenderRazorTemplate("~/views/template/SearchNotificationTemplate.cshtml", model, razorError); which references a couple of helper functions that set up my RazorFolderHostContainer class:public static string RenderRazorTemplate(string virtualPath, object model,string errorMessage = null) { var razor = AppUtils.CreateRazorHost(); var path = virtualPath.Replace("~/", "").Replace("~", "").Replace("/", "\\"); var merged = razor.RenderTemplateToString(path, model); if (merged == null) errorMessage = razor.ErrorMessage; return merged; } /// <summary> /// Creates a RazorStringHostContainer and starts it /// Call .Stop() when you're done with it. /// /// This is a static instance /// </summary> /// <param name="virtualPath"></param> /// <param name="binBasePath"></param> /// <param name="forceLoad"></param> /// <returns></returns> public static RazorFolderHostContainer CreateRazorHost(string binBasePath = null, bool forceLoad = false) { if (binBasePath == null) { if (HttpContext.Current != null) binBasePath = HttpContext.Current.Server.MapPath("~/"); else binBasePath = AppDomain.CurrentDomain.BaseDirectory; } if (_RazorHost == null || forceLoad) { if (!binBasePath.EndsWith("\\")) binBasePath += "\\"; //var razor = new RazorStringHostContainer(); var razor = new RazorFolderHostContainer(); razor.TemplatePath = binBasePath; binBasePath += "bin\\"; razor.BaseBinaryFolder = binBasePath; razor.UseAppDomain = false; razor.ReferencedAssemblies.Add(binBasePath + "ClassifiedsBusiness.dll"); razor.ReferencedAssemblies.Add(binBasePath + "ClassifiedsWeb.dll"); razor.ReferencedAssemblies.Add(binBasePath + "Westwind.Utilities.dll"); razor.ReferencedAssemblies.Add(binBasePath + "Westwind.Web.dll"); razor.ReferencedAssemblies.Add(binBasePath + "Westwind.Web.Mvc.dll"); razor.ReferencedAssemblies.Add("System.Web.dll"); razor.ReferencedNamespaces.Add("System.Web"); razor.ReferencedNamespaces.Add("ClassifiedsBusiness"); razor.ReferencedNamespaces.Add("ClassifiedsWeb"); razor.ReferencedNamespaces.Add("Westwind.Web"); razor.ReferencedNamespaces.Add("Westwind.Utilities"); _RazorHost = razor; _RazorHost.Start(); //_RazorHost.Engine.Configuration.CompileToMemory = false; } return _RazorHost; } The RazorFolderHostContainer essentially is a full runtime that mimics a folder structure like a typical Web app does including caching semantics and compiling code only if code changes on disk. It maps a folder hierarchy to views using the ~/ path syntax. The host is then configured to add assemblies and namespaces. Unfortunately the engine is not exactly like MVC's Razor - the expression expansion and code execution are the same, but some of the support methods like sections, helpers etc. are not all there so templates have to be a bit simpler. There are other folder hosts provided as well to directly execute templates from strings (using RazorStringHostContainer). The following is an example of an HTML email template @inherits RazorHosting.RazorTemplateFolderHost <ClassifiedsWeb.SearchNotificationViewModel> <html> <head> <title>Search Notifications</title> <style> body { margin: 5px;font-family: Verdana, Arial; font-size: 10pt;} h3 { color: SteelBlue; } .entry-item { border-bottom: 1px solid grey; padding: 8px; margin-bottom: 5px; } </style> </head> <body> Hello @Model.User.Name,<br /> <p>Below are your Search Results for the search phrase:</p> <h3>@Model.Notification.SearchPhrase</h3> <small>since @TimeUtils.ShortDateString(Model.Notification.LastSearch)</small> <hr /> You can see that the syntax is a little different. Instead of the familiar @model header the raw Razor  @inherits tag is used to specify the template base class (which you can extend). I took a quick look through the feature set of RazorEngine on CodePlex (now Github I guess) and the template implementation they use is closer to MVC's razor but there are other differences. In the end don't expect exact behavior like MVC templates if you use an external Razor rendering engine. This is not what I would consider an ideal solution, but it works well enough for this project. My biggest concern is the overhead of hosting a second razor engine in a Web app and the fact that here the differences in template rendering between 'real' MVC Razor views and another RazorEngine really are noticeable. You win some, you lose some It's extremely nice to see that if you have a ControllerContext handy (which probably addresses 99% of Web app scenarios) rendering a view to string using the native MVC Razor engine is pretty simple. Kudos on making that happen - as it solves a problem I see in just about every Web application I work on. But it is a bummer that a ControllerContext is required to make this simple code work. It'd be really sweet if there was a way to render views without being so closely coupled to the ASP.NET or MVC infrastructure that requires a ControllerContext. Alternately it'd be nice to have a way for an MVC based application to create a minimal ControllerContext from scratch - maybe somebody's been down that path. I tried for a few hours to come up with a way to make that work but gave up in the soup of nested contexts (MVC/Controller/View/Http). I suspect going down this path would be similar to hosting the ASP.NET runtime requiring a WorkerRequest. Brrr…. The sad part is that it seems to me that a View should really not require much 'context' of any kind to render output to string. Yes there are a few things that clearly are required like paths to the virtual and possibly the disk paths to the root of the app, but beyond that view rendering should not require much. But, no such luck. For now custom RazorHosting seems to be the only way to make Razor rendering go outside of the MVC context… Resources Full ViewRenderer.cs source code from Westwind.Web.Mvc library Hosting the Razor Engine for Non-Web Applications RazorEngine on GitHub© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET   ASP.NET  MVC   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Tom Kyte Budapestre jön!

    - by Lajos Sárecz
    Épp azon tunodöm, hogy blogom olvasói között van-e olyan, aki ne ismerné a asktom.oracle.com oldalt. Gyanítom, hogy kevesen vannak. Bár Tom mostanában elég elfoglaltnak tunik, hiszen népszeru oldalán jelenleg azt kéri, hogy elmaradásai miatt késobb kérdezzenek tole, most csupán a már megválaszolt kérdések böngészésére van lehetoség. Megjegyzem ez sem kis ajándék, ráadásul a mester aktivitását mutatja az az adat, amely a fooldalon látható: Az elmúlt négy hétben 47 új kérdést kapott, elolvasott 532 reakciót és megválaszolt ezek közül 380-at. Csoda, hogy van ideje átruccanni Európába, és eloadást tartani a hazai szakembereknek is. Információim szerint ez olyannyira egyedülálló lehetoség lesz, hogy eddig még ilyen nem volt Magyarországon, másrészt valószínuleg a jövoben nem is nagyon lesz még a régióban sem, mivel egyre inkább az a trend hogy úgynevezett virtual class-okat fog tartani o is, azaz személyesen majd maximum az éves OpenWorld konferencián lehet ot látni egy-egy eloadás erejéig. Áprilisban, Budapesten viszont két teljes napig lehet hallgatni tole a hasznosabbnál hasznosabb tanácsokat. Mik is lesznek ezek? Miért fontos a bind változók használata? Hogyan segíti a teljesítményt, a skálázhatóságot és még a biztonságot is? Hogyan muködik a materializált nézet? Mikor érdemes használni és hogyan lehet a leghasznosabbá tenni? Mikor milyen indexet érdemes használni? Mindenki tisztában van azzal, hogy indexekre szükség van, az már kevésbé egyértelmu mikor melyiket érdemes használni az optimális teljesítmény érdekében. Az eloadáson választ kapunk arra is Tom Kyte-tól, milyen szempontok alapján kell kiválasztani a megfelelo indexelést. Milyen adattárolási formákat érdemes választani? Elsore tán nem is gondolnánk hányféle trükk van az adatok optimális tárolására. Hogy csak a legfontosabbakat említsem: klaszeterezett adatszervezés, index-szervezésu tábla, particionálás, tömörítés. Mikor van szükség az adatok átszervezésére? Mik a legjobb technikák az adatok átszervezésére, hogyan lehet ezt úgy végrehajtani, hogy legkevésbé érintse az alkalmazás felhasználóit? Azt gondolom ezek a témák minden gyakorló rendszergazdának és Oracle fejlesztonek ismerosen csengenek, azonban abban egészen biztos vagyok, hogy mindenki számos újdonságot, hasznos tanácsot kaphat, ha részt vesz Thomas Kyte 2 napos tréningjén. Ja és nem utolsó sorban, egészen biztos, hogy lehetoség lesz kérdezni is Tom-tól! További információ és a regisztráció az Oracle University oldalán érheto el.

    Read the article

  • Special Activities in the OTN Lounge

    - by Bob Rhubart
    What is the OTN Lounge? It's the place for Oracle OpenWorld and JavaOne attendees to hang out, get off your feet, rest up between sessions, recharge your laptop, tablet, or phone, connect with other community members, pick the brains of subject matter experts and community leaders, enjoy some refreshments (coffee and soft drinks in the morning, beer in the afternoon), and avoid the crowds by watching keynote presentations on a plasma screen. But in addition to general chillaxin' the OTN Lounge also hosts several special activities throughout the week… OTN Lounge Special Activities Sunday Oracle Social Network Developer Challenge Kick-off   (7:00pm - 8:30pm)Want to learn more about Oracle Social Network? Love working with APIs? Enter the Oracle Social Network Developer Challenge and build your dream integration with Oracle's secure, purposeful social network for business. Demonstrate your skills, work with the latest and greatest and compete for $500 in Amazon gift cards. Go to theappslab.com/osnregisterr Read and agree to the terms and rules. Register yourself with your name, corporate email address, and company. Watch your inbox for a confirmation email from Oracle Social Network. Start coding (individual or teams welcome) Show off your work to the judges in the OTN Lounge, Wednesday, 4:00pm - 6:00pm Monday (Lounge hours: 8:00am - 7:00pm) RAC Attack (9:00am - 1:00pm) Learn about Oracle Real Application Clustering (RAC) in this collaborative event. You'll work with experts from the IOUG RAC SIG to get an Oracle Database 11gR2 RAC cluster running inside a virtual machine. For more information: RAC attack at Oracle Open World (Pythian Blog) RAC Attack - Oracle Cluster Database at Home/Events (WikiBooks) Oracle Social Network Developer Challenge Office Hours (4:00pm - 8:00pm)Meet the people behind Oracle Social Network. Tuesday (Lounge hours: 8:00am - 7:00pm) RAC Attack (9:00am - 1:00pm) Oracle Social Network Developer Challenge Office Hours (4:30pm - 8:00pm) Oracle Database / Oracle Fusion Middleware Tweet Meet (4:30pm - 6:00pm) Free as in beer! Oracle Database and Oracle Fusion Middleware tweeters, gather in the OTN Lounge for refreshments and conversation with fellow tweeters and Oracle Database and Middleware experts. Wednesday (Lounge Hours: 8:00am - 6:00pm) RAC Attack (9:00am - 1:00pm) Oracle Social Network Developer Challenge Judging (4:00pm - 6:00pm) ADF Oracle ADF / Oracle Fusion Middleware Meet-up (4:30pm - 5:30pm) Join other Oracle ADF and Oracle Fusion Middleware developers and meet the product managers and engineers behind Oracle ADF, ADF Mobile, and ADF Essentials. Did we mention free beer? Thursday (Lounge Hours: 8:00am - 2:00pm) RAC Attack (9:00am - 1:00pm) The OTN Lounge is located in the Howard St .tent, located by no small coincidence on Howard St. between 3rd and 4th, directly between Moscone North and Moscone South. An Oracle OpenWorld or JavaOne conference badge is required for access to the OTN Lounge.

    Read the article

  • Managing Database Clusters - A Whole Lot Simpler

    - by mat.keep(at)oracle.com
    Clustered computing brings with it many benefits: high performance, high availability, scalable infrastructure, etc.  But it also brings with it more complexity.Why ?  Well, by its very nature, there are more "moving parts" to monitor and manage (from physical, virtual and logical hosts) to fault detection and failover software to redundant networking components - the list goes on.  And a cluster that isn't effectively provisioned and managed will cause more downtime than the standalone systems it is designed to improve upon.  Not so great....When it comes to the database industry, analysts already estimate that 50% of a typical database's Total Cost of Ownership is attributable to staffing and downtime costs.  These costs will only increase if a database cluster is to hard to properly administer.Over the past 9 months, monitoring and management has been a major focus in the development of the MySQL Cluster database, and on Tuesday 12th January, the product team will be presenting the output of that development in a new webinar.Even if you can't make the date, it is still worth registering so you will receive automatic notification when the on-demand replay is availableIn the webinar, the team will cover:    * NDBINFO: released with MySQL Cluster 7.1, NDBINFO presents real-time status and usage statistics, providing developers and DBAs with a simple means of pro-actively monitoring and optimizing database performance and availability.    * MySQL Cluster Manager (MCM): available as part of the commercial MySQL Cluster Carrier Grade Edition, MCM simplifies the creation and management of MySQL Cluster by automating common management tasks, delivering higher administration productivity and enhancing cluster agility. Tasks that used to take 46 commands can be reduced to just one!    * MySQL Cluster Advisors & Graphs: part of the MySQL Enterprise Monitor and available in the commercial MySQL Cluster Carrier Grade Edition, the Enterprise Advisor includes automated best practice rules that alert on key performance and availability metrics from MySQL Cluster data nodes.You'll also learn how you can get started evaluating and using all of these tools to simplify MySQL Cluster management.This session will last round an hour and will include interactive Q&A throughout. You can learn more about MySQL Cluster Manager from this whitepaper and on-line demonstration.  You can also download the packages from eDelivery (just select "MySQL Database" as the product pack, select your platform, click "Go" and then scroll down to get the software).While managing clusters will never be easy, the webinar will show hou how it just got a whole lot simpler !

    Read the article

  • Issue 15: The Benefits of Oracle Exastack

    - by rituchhibber
         SOLUTIONS FOCUS The Benefits of Oracle Exastack Paul ThompsonDirector, Alliances and Solutions Partner ProgramsOracle EMEA Alliances & Channels RESOURCES -- Oracle PartnerNetwork (OPN) Oracle Exastack Program Oracle Exastack Ready Oracle Exastack Optimized Oracle Exastack Labs and Enablement Resources Oracle Exastack Labs Video Tour SUBSCRIBE FEEDBACK PREVIOUS ISSUES Exastack is a revolutionary programme supporting Oracle independent software vendor partners across the entire Oracle technology stack. Oracle's core strategy is to engineer software and hardware together, and our ISV strategy is the same. At Oracle we design engineered systems that are pre-integrated to reduce the cost and complexity of IT infrastructures while increasing productivity and performance. Oracle innovates and optimises performance at every layer of the stack to simplify business operations, drive down costs and accelerate business innovation. Our engineered systems are optimised to achieve enterprise performance levels that are unmatched in the industry. Faster time to production is achieved by implementing pre-engineered and pre-assembled hardware and software bundles. Our strategy of delivering a single-vendor stack simplifies and reduces costs associated with purchasing, deploying, and supporting IT environments for our customers and partners. In parallel to this core engineered systems strategy, the Oracle Exastack Program enables our Oracle ISV partners to leverage a scalable, integrated infrastructure that delivers their applications tuned, tested and optimised for high-performance. Specifically, the Oracle Exastack Program helps ISVs run their solutions on the Oracle Exadata Database Machine, Oracle Exalogic Elastic Cloud, and Oracle SPARC SuperCluster T4-4 - integrated systems products in which the software and hardware are engineered to work together. These products provide OPN members with a lower cost and high performance infrastructure for database and application workloads across on-premise and cloud based environments. Ready and Optimized Oracle Partners can now leverage our new Oracle Exastack Program to become Oracle Exastack Ready and Oracle Exastack Optimized. Partners can achieve Oracle Exastack Ready status through their support for Oracle Solaris, Oracle Linux, Oracle VM, Oracle Database, Oracle WebLogic Server, Oracle Exadata Database Machine, Oracle Exalogic Elastic Cloud, and Oracle SPARC SuperCluster T4-4. By doing this, partners can demonstrate to their customers that their applications are available on the latest major releases of these products. The Oracle Exastack Ready programme helps customers readily differentiate Oracle partners from lesser software developers, and identify applications that support Oracle engineered systems. Achieving Oracle Exastack Optimized status demonstrates that an OPN member has proven itself against goals for performance and scalability on Oracle integrated systems. This status enables end customers to readily identify Oracle partners that have tested and tuned their solutions for optimum performance on an Oracle Exadata Database Machine, Oracle Exalogic Elastic Cloud, and Oracle SPARC SuperCluster T4-4. These ISVs can display the Oracle Exadata Optimized, Oracle Exalogic Optimized or Oracle SPARC SuperCluster Optimized logos on websites and on all their collateral to show that they have tested and tuned their application for optimum performance. Deliver higher value to customers Oracle's investment in engineered systems enables ISV partners to deliver higher value to customer business processes. New innovations are enabled through extreme performance unachievable through traditional best-of-breed multi-vendor server/software approaches. Core product requirements can be launched faster, enabling ISVs to focus research and development investment on core competencies in order to bring value to market as quickly as possible. Through Exastack, partners no longer have to worry about the underlying product stack, which allows greater focus on the development of intellectual property above the stack. Partners are not burdened by platform issues and can concentrate simply on furthering their applications. The advantage to end customers is that partners can focus all efforts on business functionality, rather than bullet-proofing underlying technologies, and so will inevitably deliver application updates faster. Exastack provides ISVs with a number of flexible deployment options, such as on-premise or Cloud, while maintaining one single code base for applications regardless of customer deployment preference. Customers buying their solutions from Exastack ISVs can therefore be confident in deploying on their own networks, on private clouds or into a public cloud. The underlying platform will support all conceivable deployments, enabling a focus on the ISV's application itself that wouldn't be possible with other vendor partners. It stands to reason that Exastack accelerates time to value as well as lowering implementation costs all round. There is a big competitive advantage in partners being able to offer customers an optimised, pre-configured solution rather than an assortment of components and a suggested fit. Once a customer has decided to buy an Oracle Exastack Ready or Optimized partner solution, it will be up and running without any need for the customer to conduct testing of its own. Operational costs and complexity are also reduced, thanks to streamlined customer support through standardised configurations and pro-active monitoring. 'Engineered to Work Together' is a significant statement of Oracle strategy. It guarantees smoother deployment of a single vendor solution, clear ownership with no finger-pointing and the peace of mind of the Oracle Support Centre underpinning the entire product stack. Next steps Every OPN member with packaged applications must seriously consider taking steps to become Exastack Ready, or Exastack Optimized at the first opportunity. That first step down the track is to talk to an expert on the OPN Portal, at the Oracle Partner Business Center or to discuss the next steps with the closest Oracle account manager. Oracle Exastack lab environments and other technical enablement resources are available for OPN members wishing to further their knowledge of Oracle Exastack and qualify their applications for Oracle Exastack Optimized. New Boot Camps and Guided Learning Paths (GLPs), tailored specifically for ISVs, are available for Oracle Exadata Database Machine, Oracle Exalogic Elastic Cloud, Oracle Linux, Oracle Solaris, Oracle Database, and Oracle WebLogic Server. More information about these GLPs and Boot Camps (including delivery dates and locations) are posted on the OPN Competency Center and corresponding OPN Knowledge Zones. Learn more about Oracle Exastack labs and ISV specific enablement resources. "Oracle Specialized partners are of course front-and-centre, with potential customers clearly directed to those partners and to Exadata Ready partners as a matter of priority." --More OpenWorld 2011 highlights for Oracle partners and customers Oracle Application Testing Suite 9.3 application testing solution for Web, SOA and Oracle Applications Oracle Application Express Release 4.1 improving the development of database-centric Web 2.0 applications and reports Oracle Unified Directory 11g helping customers manage the critical identity information that drives their business applications Oracle SOA Suite for healthcare integration Oracle Enterprise Pack for Eclipse 11g demonstrating continued commitment to the developer and open source communities Oracle Coherence 3.7.1, the latest release of the industry's leading distributed in-memory data grid Oracle Process Accelerators helping to simplify and accelerate time-to-value for customers' business process management initiatives Oracle's JD Edwards EnterpriseOne on the iPad meeting the increasingly mobile demands of today's workforces Oracle CRM On Demand Release 19 Innovation Pack introducing industry-leading hosted call centre and enterprise-marketing capabilities designed to drive further revenue and productivity while reducing costs and improving the customer experience Oracle's Primavera Portfolio Management 9 for businesses delivering on project portfolio goals with increased versatility, transparency and accuracy Oracle's PeopleSoft Human Capital Management (HCM) 9.1 On Demand Standard Edition helping customers manage their long-term investment in enterprise-wide business applications New versions of Oracle FLEXCUBE Universal Banking and Oracle FLEXCUBE Investor Servicing for Financial Institutions, as well as Oracle Financial Services Enterprise Case Management, Oracle Financial Services Pricing Management, Oracle Financial Management Analytics and Oracle Tax Analytics Oracle Utilities Network Management System 1.11 offering new modelling and analysis features to improve distribution-grid management for electric utilities Oracle Communications Network Charging and Control 4.4 helping communications service providers (CSPs) offer their customers more flexible charging options Plus many, many more technology announcements, enhancements, momentum news and community updates -- Oracle OpenWorld 2012 A date has already been set for Oracle OpenWorld 2012. Held once again in San Francisco, exhibitors, partners, customers and Oracle people will gather from 30 September until 4 November to meet, network and learn together with the rest of the global Oracle community. Register now for Oracle OpenWorld 2012 and save $$$! We'll reward your early planning for Oracle OpenWorld 2012 with reduced rates. Super Saver deals are now available! -- Back to the welcome page

    Read the article

  • phablet-flash aborting while installing Ubuntu Touch on Nexus 4

    - by Till B
    I have a Nexus 4 with Android 4.3 installed and I want to flash it to Ubuntu Touch. My system is Ubuntu 12.04, running inside a virtual machine on Mac OS 10.5.8. To use the VM, I opened an NAT bridge and forwarded port 5037 for adb, I can see the Nexus with adb and e.g. use the adb shell into it. USB ports are also forwarded to the VM. I follow these instructions to the letter. My bootloader is unlocked, just as it was described in the instructions. Now I encounter different issues, when executing sudo phablet-flash ubuntu-system --no-backup. On the first run, it got stuck in this state: INFO:phablet-flash:Decompressing partitions/recovery.img from /home/till/Downloads/phablet-flash/imageupdates/pool/device-5ba3031cb0d6fc624848266edba781e3e821b6e1e8dd21105725f0ab26077d0a.tar.xz INFO:phablet-flash:Restarting device... wait INFO:phablet-flash:Restarting device... wait complete INFO:phablet-flash:Booting /tmp/tmpMSN8bm/partitions/recovery.img < waiting for device > downloading 'boot.img'... OKAY [ 1.772s] booting... OKAY [ 0.005s] finished. total time: 1.779s INFO:phablet-flash:Waiting for recovery image to boot The following happened: around the line "INFO:phablet-flash: Restarting...", it rebooted into the bootloader. The bootloader shows only for two seconds, then the screen goes off and the phone stays off. But I do notice, that the screen is not off - it is just black, but the background light is on. If I wait long enough, phablet-flash aborts with ERROR:phablet-flash:Wait for recovery expired On the second try, I wanted to manually start the bootloader and choose "Recovery mode". Pressing "volume down+power" at first did nothing. Releasing the buttons and then pressing them again brought me into the bootloder. After choosing "Recovery mode", phablet-flash continued and after a while aborted with the following output: INFO:phablet-flash:Wait for recovery image to boot complete INFO:phablet-flash:Clearing /data and /cache INFO:phablet-flash:Pushing /home/till/Downloads/phablet-flash/imageupdates/pool/ubuntu-2b5345658b58e55207c4a4e7b6b3d8cd4f3d9a3187d2448fc9020c884234bac0.tar.xz to /cache/recovery/ failed to copy '/home/till/Downloads/phablet-flash/imageupdates/pool/ubuntu-2b5345658b58e55207c4a4e7b6b3d8cd4f3d9a3187d2448fc9020c884234bac0.tar.xz' to '/cache/recovery/': Permission denied ERROR:phablet-flash:Command 'adb push /home/till/Downloads/phablet-flash/imageupdates/pool/ubuntu-2b5345658b58e55207c4a4e7b6b3d8cd4f3d9a3187d2448fc9020c884234bac0.tar.xz /cache/recovery/' returned non-zero exit status 1 Removing directory /tmp/tmpDnbz6N Removing directory /tmp/tmpth4L6w What can I do to properly flash my phone with Ubuntu Touch? I noticed that adb does not show the phone in recovery mode: Typing adb devices, when the Nexus 4 is in recovery mode, shows the serial number and the state device, where it should show recovery. Should the phone be rooted? This is not mentioned in the instructions.

    Read the article

  • Why do apache2 upgrades remove and not re-install libapache2-mod-php5?

    - by nutznboltz
    We repeatedly see that when an apache2 update arrives and is installed it causes the libapache2-mod-php5 package to be removed and does not subsequently re-install it automatically. We must subsequently re-install the libapache2-mod-php5 manually in order to restore functionality to our web server. Please see the following github gist, it is a contiguous section of our server's dpkg.log showing the November 14, 2011 update to apache2: https://gist.github.com/1368361 it includes 2011-11-14 11:22:18 remove libapache2-mod-php5 5.3.2-1ubuntu4.10 5.3.2-1ubuntu4.10 Is this a known issue? Do other people see this too? I could not find any launchpad bug reports about it. Platform details: $ lsb_release -ds Ubuntu 10.04.3 LTS $ uname -srvm Linux 2.6.38-12-virtual #51~lucid1-Ubuntu SMP Thu Sep 29 20:27:50 UTC 2011 x86_64 $ dpkg -l | awk '/ii.*apache/ {print $2 " " $3 }' apache2 2.2.14-5ubuntu8.7 apache2-mpm-prefork 2.2.14-5ubuntu8.7 apache2-utils 2.2.14-5ubuntu8.7 apache2.2-bin 2.2.14-5ubuntu8.7 apache2.2-common 2.2.14-5ubuntu8.7 libapache2-mod-authnz-external 3.2.4-2+squeeze1build0.10.04.1 libapache2-mod-php5 5.3.2-1ubuntu4.10 Thanks At a high-level the update process looks like: package package_name do action :upgrade case node[:platform] when 'centos', 'redhat', 'scientific' options '--disableplugin=fastestmirror' when 'ubuntu' options '-o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold"' end end But at a lower level def install_package(name, version) run_command_with_systems_locale( :command = "apt-get -q -y#{expand_options(@new_resource.options)} install #{name}=#{version}", :environment = { "DEBIAN_FRONTEND" = "noninteractive" } ) end def upgrade_package(name, version) install_package(name, version) end So Chef is using "install" to do "update". This sort of moves the question around to "how does apt-get safe-upgrade" remember to re-install libapache-mod-php5? The exact sequence of packages that triggered this was: apache2 apache2-mpm-prefork apache2-mpm-worker apache2-utils apache2.2-bin apache2.2-common But the code is attempting to run checks to make sure the packages in that list are installed already before attempting to "upgrade" them. case node[:platform] when 'debian', 'centos', 'fedora', 'redhat', 'scientific', 'ubuntu' # first primitive way is to define the updates in the recipe # data bags will be used later %w/ apache2 apache2-mpm-prefork apache2-mpm-worker apache2-utils apache2.2-bin apache2.2-common /.each{ |package_name| Chef::Log.debug("is #{package_name} among local packages available for changes?") next unless node[:packages][:changes].keys.include?(package_name) Chef::Log.debug("is #{package_name} available for upgrade?") next unless node[:packages][:changes][package_name][:action] == 'upgrade' package package_name do action :upgrade case node[:platform] when 'centos', 'redhat', 'scientific' options '--disableplugin=fastestmirror' when 'ubuntu' options '-o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold"' end end tag('upgraded') } # after upgrading everything, run yum cache updater if tagged?('upgraded') # Remove old orphaned dependencies and kernel images and kernel headers etc. # Remove cached deb files. case node[:platform] when 'ubuntu' execute 'apt-get -y autoremove' execute 'apt-get clean' # Re-check what updates are available soon. when 'centos', 'fedora', 'redhat', 'scientific' node[:packages][:last_time_we_looked_at_yum] = 0 end untag('upgraded') end end But it's clear that it fails since the dpkg.log has 2011-11-14 11:22:25 install apache2-mpm-worker 2.2.14-5ubuntu8.7 on a system which does not currently have apache2-mpm-worker. I will have to discuss this with the author, thanks again.

    Read the article

  • Toorcon 15 (2013)

    - by danx
    The Toorcon gang (senior staff): h1kari (founder), nfiltr8, and Geo Introduction to Toorcon 15 (2013) A Tale of One Software Bypass of MS Windows 8 Secure Boot Breaching SSL, One Byte at a Time Running at 99%: Surviving an Application DoS Security Response in the Age of Mass Customized Attacks x86 Rewriting: Defeating RoP and other Shinanighans Clowntown Express: interesting bugs and running a bug bounty program Active Fingerprinting of Encrypted VPNs Making Attacks Go Backwards Mask Your Checksums—The Gorry Details Adventures with weird machines thirty years after "Reflections on Trusting Trust" Introduction to Toorcon 15 (2013) Toorcon 15 is the 15th annual security conference held in San Diego. I've attended about a third of them and blogged about previous conferences I attended here starting in 2003. As always, I've only summarized the talks I attended and interested me enough to write about them. Be aware that I may have misrepresented the speaker's remarks and that they are not my remarks or opinion, or those of my employer, so don't quote me or them. Those seeking further details may contact the speakers directly or use The Google. For some talks, I have a URL for further information. A Tale of One Software Bypass of MS Windows 8 Secure Boot Andrew Furtak and Oleksandr Bazhaniuk Yuri Bulygin, Oleksandr ("Alex") Bazhaniuk, and (not present) Andrew Furtak Yuri and Alex talked about UEFI and Bootkits and bypassing MS Windows 8 Secure Boot, with vendor recommendations. They previously gave this talk at the BlackHat 2013 conference. MS Windows 8 Secure Boot Overview UEFI (Unified Extensible Firmware Interface) is interface between hardware and OS. UEFI is processor and architecture independent. Malware can replace bootloader (bootx64.efi, bootmgfw.efi). Once replaced can modify kernel. Trivial to replace bootloader. Today many legacy bootkits—UEFI replaces them most of them. MS Windows 8 Secure Boot verifies everything you load, either through signatures or hashes. UEFI firmware relies on secure update (with signed update). You would think Secure Boot would rely on ROM (such as used for phones0, but you can't do that for PCs—PCs use writable memory with signatures DXE core verifies the UEFI boat loader(s) OS Loader (winload.efi, winresume.efi) verifies the OS kernel A chain of trust is established with a root key (Platform Key, PK), which is a cert belonging to the platform vendor. Key Exchange Keys (KEKs) verify an "authorized" database (db), and "forbidden" database (dbx). X.509 certs with SHA-1/SHA-256 hashes. Keys are stored in non-volatile (NV) flash-based NVRAM. Boot Services (BS) allow adding/deleting keys (can't be accessed once OS starts—which uses Run-Time (RT)). Root cert uses RSA-2048 public keys and PKCS#7 format signatures. SecureBoot — enable disable image signature checks SetupMode — update keys, self-signed keys, and secure boot variables CustomMode — allows updating keys Secure Boot policy settings are: always execute, never execute, allow execute on security violation, defer execute on security violation, deny execute on security violation, query user on security violation Attacking MS Windows 8 Secure Boot Secure Boot does NOT protect from physical access. Can disable from console. Each BIOS vendor implements Secure Boot differently. There are several platform and BIOS vendors. It becomes a "zoo" of implementations—which can be taken advantage of. Secure Boot is secure only when all vendors implement it correctly. Allow only UEFI firmware signed updates protect UEFI firmware from direct modification in flash memory protect FW update components program SPI controller securely protect secure boot policy settings in nvram protect runtime api disable compatibility support module which allows unsigned legacy Can corrupt the Platform Key (PK) EFI root certificate variable in SPI flash. If PK is not found, FW enters setup mode wich secure boot turned off. Can also exploit TPM in a similar manner. One is not supposed to be able to directly modify the PK in SPI flash from the OS though. But they found a bug that they can exploit from User Mode (undisclosed) and demoed the exploit. It loaded and ran their own bootkit. The exploit requires a reboot. Multiple vendors are vulnerable. They will disclose this exploit to vendors in the future. Recommendations: allow only signed updates protect UEFI fw in ROM protect EFI variable store in ROM Breaching SSL, One Byte at a Time Yoel Gluck and Angelo Prado Angelo Prado and Yoel Gluck, Salesforce.com CRIME is software that performs a "compression oracle attack." This is possible because the SSL protocol doesn't hide length, and because SSL compresses the header. CRIME requests with every possible character and measures the ciphertext length. Look for the plaintext which compresses the most and looks for the cookie one byte-at-a-time. SSL Compression uses LZ77 to reduce redundancy. Huffman coding replaces common byte sequences with shorter codes. US CERT thinks the SSL compression problem is fixed, but it isn't. They convinced CERT that it wasn't fixed and they issued a CVE. BREACH, breachattrack.com BREACH exploits the SSL response body (Accept-Encoding response, Content-Encoding). It takes advantage of the fact that the response is not compressed. BREACH uses gzip and needs fairly "stable" pages that are static for ~30 seconds. It needs attacker-supplied content (say from a web form or added to a URL parameter). BREACH listens to a session's requests and responses, then inserts extra requests and responses. Eventually, BREACH guesses a session's secret key. Can use compression to guess contents one byte at-a-time. For example, "Supersecret SupersecreX" (a wrong guess) compresses 10 bytes, and "Supersecret Supersecret" (a correct guess) compresses 11 bytes, so it can find each character by guessing every character. To start the guess, BREACH needs at least three known initial characters in the response sequence. Compression length then "leaks" information. Some roadblocks include no winners (all guesses wrong) or too many winners (multiple possibilities that compress the same). The solutions include: lookahead (guess 2 or 3 characters at-a-time instead of 1 character). Expensive rollback to last known conflict check compression ratio can brute-force first 3 "bootstrap" characters, if needed (expensive) block ciphers hide exact plain text length. Solution is to align response in advance to block size Mitigations length: use variable padding secrets: dynamic CSRF tokens per request secret: change over time separate secret to input-less servlets Future work eiter understand DEFLATE/GZIP HTTPS extensions Running at 99%: Surviving an Application DoS Ryan Huber Ryan Huber, Risk I/O Ryan first discussed various ways to do a denial of service (DoS) attack against web services. One usual method is to find a slow web page and do several wgets. Or download large files. Apache is not well suited at handling a large number of connections, but one can put something in front of it Can use Apache alternatives, such as nginx How to identify malicious hosts short, sudden web requests user-agent is obvious (curl, python) same url requested repeatedly no web page referer (not normal) hidden links. hide a link and see if a bot gets it restricted access if not your geo IP (unless the website is global) missing common headers in request regular timing first seen IP at beginning of attack count requests per hosts (usually a very large number) Use of captcha can mitigate attacks, but you'll lose a lot of genuine users. Bouncer, goo.gl/c2vyEc and www.github.com/rawdigits/Bouncer Bouncer is software written by Ryan in netflow. Bouncer has a small, unobtrusive footprint and detects DoS attempts. It closes blacklisted sockets immediately (not nice about it, no proper close connection). Aggregator collects requests and controls your web proxies. Need NTP on the front end web servers for clean data for use by bouncer. Bouncer is also useful for a popularity storm ("Slashdotting") and scraper storms. Future features: gzip collection data, documentation, consumer library, multitask, logging destroyed connections. Takeaways: DoS mitigation is easier with a complete picture Bouncer designed to make it easier to detect and defend DoS—not a complete cure Security Response in the Age of Mass Customized Attacks Peleus Uhley and Karthik Raman Peleus Uhley and Karthik Raman, Adobe ASSET, blogs.adobe.com/asset/ Peleus and Karthik talked about response to mass-customized exploits. Attackers behave much like a business. "Mass customization" refers to concept discussed in the book Future Perfect by Stan Davis of Harvard Business School. Mass customization is differentiating a product for an individual customer, but at a mass production price. For example, the same individual with a debit card receives basically the same customized ATM experience around the world. Or designing your own PC from commodity parts. Exploit kits are another example of mass customization. The kits support multiple browsers and plugins, allows new modules. Exploit kits are cheap and customizable. Organized gangs use exploit kits. A group at Berkeley looked at 77,000 malicious websites (Grier et al., "Manufacturing Compromise: The Emergence of Exploit-as-a-Service", 2012). They found 10,000 distinct binaries among them, but derived from only a dozen or so exploit kits. Characteristics of Mass Malware: potent, resilient, relatively low cost Technical characteristics: multiple OS, multipe payloads, multiple scenarios, multiple languages, obfuscation Response time for 0-day exploits has gone down from ~40 days 5 years ago to about ~10 days now. So the drive with malware is towards mass customized exploits, to avoid detection There's plenty of evicence that exploit development has Project Manager bureaucracy. They infer from the malware edicts to: support all versions of reader support all versions of windows support all versions of flash support all browsers write large complex, difficult to main code (8750 lines of JavaScript for example Exploits have "loose coupling" of multipe versions of software (adobe), OS, and browser. This allows specific attacks against specific versions of multiple pieces of software. Also allows exploits of more obscure software/OS/browsers and obscure versions. Gave examples of exploits that exploited 2, 3, 6, or 14 separate bugs. However, these complete exploits are more likely to be buggy or fragile in themselves and easier to defeat. Future research includes normalizing malware and Javascript. Conclusion: The coming trend is that mass-malware with mass zero-day attacks will result in mass customization of attacks. x86 Rewriting: Defeating RoP and other Shinanighans Richard Wartell Richard Wartell The attack vector we are addressing here is: First some malware causes a buffer overflow. The malware has no program access, but input access and buffer overflow code onto stack Later the stack became non-executable. The workaround malware used was to write a bogus return address to the stack jumping to malware Later came ASLR (Address Space Layout Randomization) to randomize memory layout and make addresses non-deterministic. The workaround malware used was to jump t existing code segments in the program that can be used in bad ways "RoP" is Return-oriented Programming attacks. RoP attacks use your own code and write return address on stack to (existing) expoitable code found in program ("gadgets"). Pinkie Pie was paid $60K last year for a RoP attack. One solution is using anti-RoP compilers that compile source code with NO return instructions. ASLR does not randomize address space, just "gadgets". IPR/ILR ("Instruction Location Randomization") randomizes each instruction with a virtual machine. Richard's goal was to randomize a binary with no source code access. He created "STIR" (Self-Transofrming Instruction Relocation). STIR disassembles binary and operates on "basic blocks" of code. The STIR disassembler is conservative in what to disassemble. Each basic block is moved to a random location in memory. Next, STIR writes new code sections with copies of "basic blocks" of code in randomized locations. The old code is copied and rewritten with jumps to new code. the original code sections in the file is marked non-executible. STIR has better entropy than ASLR in location of code. Makes brute force attacks much harder. STIR runs on MS Windows (PEM) and Linux (ELF). It eliminated 99.96% or more "gadgets" (i.e., moved the address). Overhead usually 5-10% on MS Windows, about 1.5-4% on Linux (but some code actually runs faster!). The unique thing about STIR is it requires no source access and the modified binary fully works! Current work is to rewrite code to enforce security policies. For example, don't create a *.{exe,msi,bat} file. Or don't connect to the network after reading from the disk. Clowntown Express: interesting bugs and running a bug bounty program Collin Greene Collin Greene, Facebook Collin talked about Facebook's bug bounty program. Background at FB: FB has good security frameworks, such as security teams, external audits, and cc'ing on diffs. But there's lots of "deep, dark, forgotten" parts of legacy FB code. Collin gave several examples of bountied bugs. Some bounty submissions were on software purchased from a third-party (but bounty claimers don't know and don't care). We use security questions, as does everyone else, but they are basically insecure (often easily discoverable). Collin didn't expect many bugs from the bounty program, but they ended getting 20+ good bugs in first 24 hours and good submissions continue to come in. Bug bounties bring people in with different perspectives, and are paid only for success. Bug bounty is a better use of a fixed amount of time and money versus just code review or static code analysis. The Bounty program started July 2011 and paid out $1.5 million to date. 14% of the submissions have been high priority problems that needed to be fixed immediately. The best bugs come from a small % of submitters (as with everything else)—the top paid submitters are paid 6 figures a year. Spammers like to backstab competitors. The youngest sumitter was 13. Some submitters have been hired. Bug bounties also allows to see bugs that were missed by tools or reviews, allowing improvement in the process. Bug bounties might not work for traditional software companies where the product has release cycle or is not on Internet. Active Fingerprinting of Encrypted VPNs Anna Shubina Anna Shubina, Dartmouth Institute for Security, Technology, and Society (I missed the start of her talk because another track went overtime. But I have the DVD of the talk, so I'll expand later) IPsec leaves fingerprints. Using netcat, one can easily visually distinguish various crypto chaining modes just from packet timing on a chart (example, DES-CBC versus AES-CBC) One can tell a lot about VPNs just from ping roundtrips (such as what router is used) Delayed packets are not informative about a network, especially if far away from the network More needed to explore about how TCP works in real life with respect to timing Making Attacks Go Backwards Fuzzynop FuzzyNop, Mandiant This talk is not about threat attribution (finding who), product solutions, politics, or sales pitches. But who are making these malware threats? It's not a single person or group—they have diverse skill levels. There's a lot of fat-fingered fumblers out there. Always look for low-hanging fruit first: "hiding" malware in the temp, recycle, or root directories creation of unnamed scheduled tasks obvious names of files and syscalls ("ClearEventLog") uncleared event logs. Clearing event log in itself, and time of clearing, is a red flag and good first clue to look for on a suspect system Reverse engineering is hard. Disassembler use takes practice and skill. A popular tool is IDA Pro, but it takes multiple interactive iterations to get a clean disassembly. Key loggers are used a lot in targeted attacks. They are typically custom code or built in a backdoor. A big tip-off is that non-printable characters need to be printed out (such as "[Ctrl]" "[RightShift]") or time stamp printf strings. Look for these in files. Presence is not proof they are used. Absence is not proof they are not used. Java exploits. Can parse jar file with idxparser.py and decomile Java file. Java typially used to target tech companies. Backdoors are the main persistence mechanism (provided externally) for malware. Also malware typically needs command and control. Application of Artificial Intelligence in Ad-Hoc Static Code Analysis John Ashaman John Ashaman, Security Innovation Initially John tried to analyze open source files with open source static analysis tools, but these showed thousands of false positives. Also tried using grep, but tis fails to find anything even mildly complex. So next John decided to write his own tool. His approach was to first generate a call graph then analyze the graph. However, the problem is that making a call graph is really hard. For example, one problem is "evil" coding techniques, such as passing function pointer. First the tool generated an Abstract Syntax Tree (AST) with the nodes created from method declarations and edges created from method use. Then the tool generated a control flow graph with the goal to find a path through the AST (a maze) from source to sink. The algorithm is to look at adjacent nodes to see if any are "scary" (a vulnerability), using heuristics for search order. The tool, called "Scat" (Static Code Analysis Tool), currently looks for C# vulnerabilities and some simple PHP. Later, he plans to add more PHP, then JSP and Java. For more information see his posts in Security Innovation blog and NRefactory on GitHub. Mask Your Checksums—The Gorry Details Eric (XlogicX) Davisson Eric (XlogicX) Davisson Sometimes in emailing or posting TCP/IP packets to analyze problems, you may want to mask the IP address. But to do this correctly, you need to mask the checksum too, or you'll leak information about the IP. Problem reports found in stackoverflow.com, sans.org, and pastebin.org are usually not masked, but a few companies do care. If only the IP is masked, the IP may be guessed from checksum (that is, it leaks data). Other parts of packet may leak more data about the IP. TCP and IP checksums both refer to the same data, so can get more bits of information out of using both checksums than just using one checksum. Also, one can usually determine the OS from the TTL field and ports in a packet header. If we get hundreds of possible results (16x each masked nibble that is unknown), one can do other things to narrow the results, such as look at packet contents for domain or geo information. With hundreds of results, can import as CSV format into a spreadsheet. Can corelate with geo data and see where each possibility is located. Eric then demoed a real email report with a masked IP packet attached. Was able to find the exact IP address, given the geo and university of the sender. Point is if you're going to mask a packet, do it right. Eric wouldn't usually bother, but do it correctly if at all, to not create a false impression of security. Adventures with weird machines thirty years after "Reflections on Trusting Trust" Sergey Bratus Sergey Bratus, Dartmouth College (and Julian Bangert and Rebecca Shapiro, not present) "Reflections on Trusting Trust" refers to Ken Thompson's classic 1984 paper. "You can't trust code that you did not totally create yourself." There's invisible links in the chain-of-trust, such as "well-installed microcode bugs" or in the compiler, and other planted bugs. Thompson showed how a compiler can introduce and propagate bugs in unmodified source. But suppose if there's no bugs and you trust the author, can you trust the code? Hell No! There's too many factors—it's Babylonian in nature. Why not? Well, Input is not well-defined/recognized (code's assumptions about "checked" input will be violated (bug/vunerabiliy). For example, HTML is recursive, but Regex checking is not recursive. Input well-formed but so complex there's no telling what it does For example, ELF file parsing is complex and has multiple ways of parsing. Input is seen differently by different pieces of program or toolchain Any Input is a program input executes on input handlers (drives state changes & transitions) only a well-defined execution model can be trusted (regex/DFA, PDA, CFG) Input handler either is a "recognizer" for the inputs as a well-defined language (see langsec.org) or it's a "virtual machine" for inputs to drive into pwn-age ELF ABI (UNIX/Linux executible file format) case study. Problems can arise from these steps (without planting bugs): compiler linker loader ld.so/rtld relocator DWARF (debugger info) exceptions The problem is you can't really automatically analyze code (it's the "halting problem" and undecidable). Only solution is to freeze code and sign it. But you can't freeze everything! Can't freeze ASLR or loading—must have tables and metadata. Any sufficiently complex input data is the same as VM byte code Example, ELF relocation entries + dynamic symbols == a Turing Complete Machine (TM). @bxsays created a Turing machine in Linux from relocation data (not code) in an ELF file. For more information, see Rebecca "bx" Shapiro's presentation from last year's Toorcon, "Programming Weird Machines with ELF Metadata" @bxsays did same thing with Mach-O bytecode Or a DWARF exception handling data .eh_frame + glibc == Turning Machine X86 MMU (IDT, GDT, TSS): used address translation to create a Turning Machine. Page handler reads and writes (on page fault) memory. Uses a page table, which can be used as Turning Machine byte code. Example on Github using this TM that will fly a glider across the screen Next Sergey talked about "Parser Differentials". That having one input format, but two parsers, will create confusion and opportunity for exploitation. For example, CSRs are parsed during creation by cert requestor and again by another parser at the CA. Another example is ELF—several parsers in OS tool chain, which are all different. Can have two different Program Headers (PHDRs) because ld.so parses multiple PHDRs. The second PHDR can completely transform the executable. This is described in paper in the first issue of International Journal of PoC. Conclusions trusting computers not only about bugs! Bugs are part of a problem, but no by far all of it complex data formats means bugs no "chain of trust" in Babylon! (that is, with parser differentials) we need to squeeze complexity out of data until data stops being "code equivalent" Further information See and langsec.org. USENIX WOOT 2013 (Workshop on Offensive Technologies) for "weird machines" papers and videos.

    Read the article

  • Best Practices for Building a Virtualized SPARC Computing Environment

    - by Scott Elvington
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle just published Best Practices for Building a Virtualized SPARC Computing Environment, a white paper that provides guidance on the complete hardware and software stack for deploying and managing your physical and virtual SPARC infrastructure. The solution is based on Oracle SPARC T4 servers, Oracle Solaris 11 with Oracle VM for SPARC 2.2, Sun ZFS storage appliances, Sun 10GbE 72 port switches and Oracle Enterprise Manager Ops Center 12c. The paper emphasizes the value and importance of planning the resources (compute, network and storage) that will comprise the virtualized environment to achieve the desired capacity, performance and availability characteristics. The document also details numerous operational best practices that will help you deliver on those characteristics with unique capabilities provided by Enterprise Manager Ops Center including policy-based guest placement, pool resource balancing and automated guest recovery in the event of server failure. Plenty of references to supplementary documentation are included to help point you to additional resources. Whether you’re building the first stages of your private cloud or a general-purpose virtualized SPARC computing environment, these documented best practices will help ensure success. Please join Phil Bullinger and Steve Wilson from Oracle to learn more about breakthrough efficiency in private cloud infrastructure and how SPARC based virtualization can help you get started on your cloud journey. Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

    Read the article

  • Solaris 11 Launch Blog Carnival Roundup

    - by constant
    Solaris 11 is here! And together with the official launch activities, a lot of Oracle and non-Oracle bloggers contributed helpful and informative blog articles to help your datacenter go to eleven. Here are some notable blog postings, sorted by category for your Solaris 11 blog-reading pleasure: Getting Started/Overview A lot of people speculated that the official launch of Solaris 11 would be on 11/11 (whatever way you want to turn it), but it actually happened two days earlier. Larry Wake himself offers 11 Reasons Why Oracle Solaris 11 11/11 Isn't Being Released on 11/11/11. Then, Larry goes on with a summary: Oracle Solaris 11: The First Cloud OS gives you a short and sweet rundown of what the major new features of Solaris 11 are. Jeff Victor has his own list of What's New in Oracle Solaris 11. A popular Solaris 11 meme is to write a blog post about 11 favourite features: Jim Laurent's 11 Reasons to Love Solaris 11, Darren Moffat's 11 Favourite Solaris 11 Features, Mike Gerdt's 11 of My Favourite Things! are just three examples of "11 Favourite Things..." type blog posts, I'm sure many more will follow... More official overview content for Solaris 11 is available from the Oracle Tech Network Solaris 11 Portal. Also, check out Rick Ramsey's blog post Solaris 11 Resources for System Administrators on the OTN Blog and his secret 5 Commands That Make Solaris Administration Easier post from the OTN Garage. (Automatic) Installation and the Image Packaging System (IPS) The brand new Image Packaging System (IPS) and the Automatic Installer (IPS), together with numerous other install/packaging/boot/patching features are among the most significant improvements in Solaris 11. But before installing, you may wonder whether Solaris 11 will support your particular set of hardware devices. Again, the OTN Garage comes to the rescue with Rick Ramsey's post How to Find Out Which Devices Are Supported By Solaris 11. Included is a useful guide to all the first steps to get your Solaris 11 system up and running. Tim Foster had a whole handful of blog posts lined up for the launch, teaching you everything you need to know about IPS but didn't dare to ask: The IPS System Repository, IPS Self-assembly - Part 1: Overlays and Part 2: Multiple Packages Delivering Configuration. Watch out for more IPS posts from Tim! If installing packages or upgrading your system from the net makes you uneasy, then you're not alone: Jim Laurent will tech you how Building a Solaris 11 Repository Without Network Connection will make your life easier. Many of you have already peeked into the future by installing Solaris 11 Express. If you're now wondering whether you can upgrade or whether a fresh install is necessary, then check out Alan Hargreaves's post Upgrading Solaris 11 Express b151a with support to Solaris 11. The trick is in upgrading your pkg(1M) first. Networking One of the first things to do after installing Solaris 11 (or any operating system for that matter), is to set it up for networking. Solaris 11 comes with the brand new "Network Auto-Magic" feature which can figure out everything by itself. For those cases where you want to exercise a little more control, Solaris 11 left a few people scratching their heads. Fortunately, Tschokko wrote up this cool blog post: Solaris 11 manual IPv4 & IPv6 configuration right after the launch ceremony. Thanks, Tschokko! And Milek points out a long awaited networking feature in Solaris 11 called Solaris 11 - hostmodel, which I know for a fact that many customers have looked forward to: How to "bind" a Solaris 11 system to a specific gateway for specific IP address it is using. Steffen Weiberle teaches us how to tune the Solaris 11 networking stack the proper way: ipadm(1M). No more fiddling with ndd(1M)! Check out his tutorial on Solaris 11 Network Tunables. And if you want to get even deeper into the networking stack, there's nothing better than DTrace. Alan Maguire teaches you in: DTracing TCP Congestion Control how to probe deeply into the Solaris 11 TCP/IP stack, the TCP congestion control part in particular. Don't miss his other DTrace and TCP related blog posts! DTrace And there we are: DTrace, the king of all observability tools. Long time DTrace veteran and co-author of The DTrace book*, Brendan Gregg blogged about Solaris 11 DTrace syscall provider changes. BTW, after you install Solaris 11, check out the DTrace toolkit which is installed by default in /usr/dtrace/DTT. It is chock full of handy DTrace scripts, many of which contributed by Brendan himself! Security Another big theme in Solaris 11, and one that is crucial for the success of any operating system in the Cloud is Security. Here are some notable posts in this category: Darren Moffat starts by showing us how to completely get rid of root: Completely Disabling Root Logins on Solaris 11. With no root user, there's one major entry point less to worry about. But that's only the start. In Immutable Zones on Encrypted ZFS, Darren shows us how to double the security of your services: First by locking them into the new Immutable Zones feature, then by encrypting their data using the new ZFS encryption feature. And if you're still missing sudo from your Linux days, Darren again has a solution: Password (PAM) caching for Solaris su - "a la sudo". If you're wondering how much compute power all this encryption will cost you, you're in luck: The Solaris X86 AESNI OpenSSL Engine will make sure you'll use your Intel's embedded crypto support to its fullest. And if you own a brand new SPARC T4 machine you're even luckier: It comes with its own SPARC T4 OpenSSL Engine. Dan Anderson's posts show how there really is now excuse not to encrypt any more... Developers Solaris 11 has a lot to offer to developers as well. Ali Bahrami has a series of blog posts that cover diverse developer topics: elffile: ELF Specific File Identification Utility, Using Stub Objects and The Stub Proto: Not Just For Stub Objects Anymore to name a few. BTW, if you're a developer and want to shape the future of Solaris 11, then Vijay Tatkar has a hint for you: Oracle (Sun Systems Group) is hiring! Desktop and Graphics Yes, Solaris 11 is a 100% server OS, but it can also offer a decent desktop environment, especially if you are a developer. Alan Coopersmith starts by discussing S11 X11: ye olde window system in today's new operating system, then Calum Benson shows us around What's new on the Solaris 11 Desktop. Even accessibility is a first-class citizen in the Solaris 11 user interface. Peter Korn celebrates: Accessible Oracle Solaris 11 - released! Performance Gone are the days of "Slowaris", when Solaris was among the few OSes that "did the right thing" while others cut corners just to win benchmarks. Today, Solaris continues doing the right thing, and it delivers the right performance at the same time. Need proof? Check out Brian's BestPerf blog with continuous updates from the benchmarking lab, including Recent Benchmarks Using Oracle Solaris 11! Send Me More Solaris 11 Launch Articles! These are just a few of the more interesting blog articles that came out around the Solaris 11 launch, I'm sure there are many more! Feel free to post a comment below if you find a particularly interesting blog post that hasn't been listed so far and share your enthusiasm for Solaris 11! *Affiliate link: Buy cool stuff and support this blog at no extra cost. We both win! var flattr_uid = '26528'; var flattr_tle = 'Solaris 11 Launch Blog Carnival Roundup'; var flattr_dsc = '<strong>Solaris 11 is here!</strong>And together with the official launch activities, a lot of Oracle and non-Oracle bloggers contributed helpful and informative blog articles to help your datacenter <a href="http://en.wikipedia.org/wiki/Up_to_eleven">go to eleven</a>.Here are some notable blog postings, sorted by category for your Solaris 11 blog-reading pleasure:'; var flattr_tag = 'blogging,digest,Oracle,Solaris,solaris,solaris 11'; var flattr_cat = 'text'; var flattr_url = 'http://constantin.glez.de/blog/2011/11/solaris-11-launch-blog-carnival-roundup'; var flattr_lng = 'en_GB'

    Read the article

  • Using ClearType Tuner in Windows 7

    - by Mysticgeek
    Back in Windows XP there was an important Power toy created to enable ClearType for users of LCD screens. Now it’s standard in Windows 7, but you may not know about it. So let’s take a look. Access Clear Type in Windows 7 Click on the Start Menu and type cleartype into the search box and hit Enter. It should be enabled by default, but if not just check the box to enable it. Now, in the next step, you can enable it for two or more monitors if you have them. Or you could select an individual one if it works best for one but not another. Some people might want it turned off if they have a CRT and a LCD monitor for example. Now you can go through the wizard and pick out what resolution works best for the monitor(s) you choose.   Just select the text in each step that looks best for you. Then finish it out… This is a cool trick you may not have known about that already exists in Windows 7, and it can definitely help you get the best look of the text on each screen if you’re using different monitors! You may have to experiment with some different settings to get what works best for you. If you’re using Vista or XP check out our article on tuning clear type font settings in Vista/XP. Similar Articles Productive Geek Tips Tune Your ClearType Font Settings in Windows VistaGeek Tip: Be Sure to Enable ClearType in Your XP Virtual MachineListen to Local FM Radio in Windows 7 Media CenterWhy Do My Windows Vista Fonts Look Horrible?Roundup: 16 Tweaks to Windows Vista Look & Feel TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Need Help with Your Home Network? Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images

    Read the article

  • Learn Cloud Computing – It’s Time

    - by Ben Griswold
    Last week, I gave an in-house presentation on cloud computing.  I walked through an overview of cloud computing – characteristics (on demand, elastic, fully managed by provider), why are we interested (virtualization, distributed computing, increased access to high-speed internet, weak economy), various types (public, private, virtual private cloud) and services models (IaaS, PaaS, SaaS.)  Though numerous providers have emerged in the cloud computing space, the presentation focused on Amazon, Google and Microsoft offerings and provided an overview of their platforms, costs, data tier technologies, management and security.  One of the biggest talking points was why developers should consider the cloud as part of their deployment strategy: You only have to pay for what you consume You will be well-positioned for one time event provisioning You will reap the benefits of automated growth and scalable technologies For the record: having deployed dozens of applications on various platforms over the years, pricing tends to be the biggest customer concern.  Yes, scalability is a customer consideration, too, but it comes in distant second.  Boy do I hope you’re still reading… You may be thinking, “Cloud computing is well and good and it sounds catchy, but should I bother?  After all, it’s just another technology bundle which I’m supposed to ramp up on because it’s the latest thing, right?”  Well, my clients used to be 100% reliant upon me to find adequate hosting for them.  Now I find they are often aware of cloud services and some come to me with the “possibility” that deploying to the cloud is the best solution for them.  It’s like the patient who walks into the doctor’s office with their diagnosis and treatment already in mind thanks to the handful of Internet searches they performed earlier that day.  You know what?  The customer may be correct about the cloud. It may be a perfect fit for their app.  But maybe not…  I don’t think there’s a need to learn about every technical thing under the sun, but if you are responsible for identifying hosting solutions for your customers, it is time to get up to speed on cloud computing and the various offerings (if you haven’t already.)  Here are a few references to get you going: DZone Refcardz #82 Getting Started with Cloud Computing by Daniel Rubio Wikipedia Cloud Computing – What is it? Amazon Machine Images (AMI) Google App Engine SDK Azure SDK EC2 Spot Pricing Google App Engine Team Blog Amazon EC2 Team Blog Microsoft Azure Team Blog Amazon EC2 – Cost Calculator Google App Engine – Cost and Billing Resources Microsoft Azure – Cost Calculator Larry Ellison has stated that cloud computing has been defined as "everything that we currently do" and that it will have no effect except to "change the wording on some of our ads" Oracle launches worldwide cloud-computing tour NoSQL Movement  

    Read the article

  • Oracle Linux Training Calendar

    - by Antoinette O'Sullivan
    The Oracle Linux System Administrator Curriculum is designed to provide you with the knowledge and skills necessary to effectively administer an Oracle Linux environment. These classes will help you prepare to install, configure, and manage your enterprise Linux environment as well as prepare you for the Oracle Linux Certification. You can take these courses as a: Live-Virtual event: Following the instructor-led classes from your own desk - no travel required. There is an extensive list of events on the schedule to suit different timezones. See full list on http://oracle.com/education/linux. In-Class event: Travel to an education center to take these classes. Below is a sample of in-class events on the schedule: Unix and Linux Essentials: This 3-day class is for those new to the linux operating system. You learn to manage files & directories from the command line, perform remote connections, file transfers & more.  Location  Date  Delivery Language  Nairobi, Kenya  3 December 2012  English  Riyadh, Saudia Arabia  5 January 2013  English  Cape Town, South Africa  9 January 2013  English  Durban, South Africa  9 January 2013  English  Johannesburg, South Africa  9 January 2013  English  Woodmead, South Africa  15 July 2013  English  Denver, United States  23 January 2013  English  Columbia, United States  2 January 2013  English  East Lansing, United States  9 January 2013  English  Roseville, United States  1 April 2013  English  Morrisville, United States  11 February 2013  English  Jakarta, Indonesia  26 December 2012  English  Kuala Lumpur, Malaysia  29 January 2013  English  Auckland, New Zealand  12 December 2012  English  Makati City, Philippines  14 January 2013  English  Singapore  13 February 2013  English  North Sydney, Australia  4 February 2013  English  Brisbane, Australia  29 April 2013  English  Melbourne, Australia  29 January 2013  English Oracle Linux System Administration: This 5 day course covers a broad range of Oracle Linux system administration tasks, from installing the operating system to preparing the system for Oracle Database. The course also provides an extensive hands-on experience for key system administration tasks. You will gain comprehensive skills in installing, configuring, and managing an Oracle Linux system as well as insight into ULN, Ksplice and UEK.  Location  Date  Delivery Language  Brussels, Belgium  26 November 2012  English  Windhof, Luxembourg  17 December 2012  English  Utrecht, Netherlands  11 February 2013  Dutch  Warsaw, Poland  25 February 2013  Polish  Gabarone, Botswana  22 April 2013  English  Nairobi, Kenya  10 December 2012  English  Johannesburg, South Africa  11 March 2013  English  Belmont, CA, United States  11 February 2013  English  Irvine, CA, United States  25 March 2013  English  Roseville, MN, United States  26 November 2013  English  Irving, TX, United States  14 January 2013  English  Jakarta, Indonesia  3 December 2012  English  Singapore  26 November 2012  English  Canberra, Australia  21 January 2013  English  Sydney, Australia  21 January 2013  English  Melbourne, Australia  11 February 2013  English To test your Oracle Linux System Administration skills, take the Oracle Linux 6 Implementation Essentials Certification Exam. For more information on the Oracle Linux Curriculum or to express interest in additional events, go to http://oracle.com/education/linux.

    Read the article

  • JMX Based Monitoring - Part Two - JVM Monitoring

    - by Anthony Shorten
    This the second article in the series focussing on the JMX based monitoring capabilities possible with the Oracle Utilities Application Framework. In all versions of the Oracle utilities Application Framework, it is possible to use the basic JMX based monitoring available with the Java Virtual Machine to provide basic statistics ablut the JVM. In Java 5 and above, the JVM automatically allowed local monitoring of the JVM statistics from an approporiate console. When I say local I mean the monitoring tool must be executed from the same machine (and in some cases the same user that is running the JVM) to connect to the JVM directly. If you are using jconsole, for example, then you must have access to a GUI (X-Windows or Windows) to display the jconsole output. This is the easist way of monitoring without doing too much configration but is not always practical. Java offers a remote monitorig capability to allow yo to connect to a remotely executing JVM from a console (like jconsole). To use this facility additional JVM options must be added to the command line that started the JVM. Details of the additional options for the version of the Java you are running is located at the JMX information site. Typically to remotely connect to a running JVM that JVM must be configured with the following categories of options: JMX Port - The JVM must allow connections on a listening port specified on the command line Connection security - The connection to the JVM can be secured. This is recommended as JMX is not just a monitoring protocol it is a managemet protocol. It is possible to change values in a running JVM using JMX and there are NO "Are you sure?" safeguards. For a Oracle Utilities Application Framework based application there are a few guidelines when configuring and using this JMX based remote monitoring of the JVM's: Online JVM - The JVM used to run the online system is embedded within the J2EE Web Application Server. To enable JMX monitoring on this JVM you can either change the startup script that starts the Web Application Server or check whether your J2EE Web Application natively supports JVM statistics collection. Child JVM's (COBOL only) - The Child JVM's should not be monitored using this method as they are recycled regularly by the configuration and therefore statistics collected are of little value. Batch Threadpoools - Batch already has a JMX interface (which will be covered in another article). Additional monitoring can be enabled but the base supported monitoring is sufficient for most needs. If you are an Oracle Utilities Application Framework site, then you can specify the additional options for JMX Java monitoring on the OPTS paramaters supported for each component of the architecture. Just ensure the port numbers used are unique for each JVM running on any machine.

    Read the article

< Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >