Search Results

Search found 17287 results on 692 pages for 'card game'.

Page 333/692 | < Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >

  • Wrong audio volume at boot

    - by skerit
    When I boot my computer and login the volume level is always way too loud. Unfortunately the only way to change it is a physical knob on my speaker. As soon as I can change the volume using my keyboard the volume immediately drops. Say the volume is at 100%, as soon as I turn the dial on my keyboard a little bit it drops to a normal level like 40% How do I get this to work in a clear way, like having it remember the audio level it was on at shutdown? Here's my audio card model: 82801JI (ICH10 Family) HD Audio Controller An Intel card on a Asus motherboard

    Read the article

  • How to efficiently render resizable GUI elements in DirectX?

    - by PolGraphic
    I wonder what would be most efficient way to render the GUI elements. When we're talking about constant-size elements (that can still be moving), the textures' atlas seems to be good. But what with the resizeable elements? Let's say the panel (with textured borders)? Is there any better way than just render 9 rectangles with textures on them (I guess one texture and different textures coordinates for left-top corner, border, middle etc. used in shader)?

    Read the article

  • Macbook Pro 8,2 Graphics switching - Ubuntu 12.04

    - by fgs
    I've been reading docs and various pages for a few hours now and can't seem to put all of the pieces together on this. Basically I am trying to get 12.04 installed on my MBP 8,2 with graphics card switching working in some way or another. My basic understanding is that I need to do an EFI boot install of ubuntu so that graphics card switching will work (due to the hardware design). From there I may be able to use one of the kernel modules for graphics switching: https://help.ubuntu.com/community/HybridGraphics That article isn't clear on whether I need to do an EFI install. I have also seen comments in posts here that say and EFI install works by default as long as you have refit installed. Overall, I'm quite lost as to the simplest way to proceed to get an install up and running with graphics switching. I don't mind using open source GFX drivers as long as the basics work. Any help towards a solution is greatly appreciated.

    Read the article

  • Stop map from scrolling but let player still move?

    - by ChocoMan
    I have a basic method of scrolling around on a map (moving the map instead of the player), but at when the player gets to a certain proximity to the edge, how do you stop the map from scrolling, but still allow the player to move around until it is away from that proximity? I'm not looking for any code. Just a suggestion so that I can implement it myself. I can see it visually (creating 4 boxed intersecting boundaries for the player to enter), but not sure how to come about stopping and resuming the scrolling of the map.

    Read the article

  • Drawing simple geometric figures with DrawUserPrimitives?

    - by Navy Seal
    I'm trying to draw a simple triangle based on an array of vertex. I've been searching for a tutorial and I found a simple example on riemers but I couldn't get it to work. I think it was made for XNA 3 and it seems there were some changes to XNA 4? Using this example: http://www.riemers.net/eng/Tutorials/XNA/Csharp/Series1/The_first_triangle.php I get this error: Additional information: The current vertex declaration does not include all the elements required by the current vertex shader. TextureCoordinate0 is missing. I'm not english so I'm having some trouble to understand everything. For what I understand error is confusing because I'm trying to draw a triangle color based and not texture based and it shouldn't need a texture. Also I saw some articles about dynamic shadows and lights and I would like to know if this is the kind of code used to do it with some tweaks like culling because I'm wondering if its heavy code for performance in real time.

    Read the article

  • Nothing drawing on screen OpenGL with GLSL

    - by codemonkey
    I hate to be asking this kind of question here, but I am at a complete loss as to what is going wrong, so please bear with me. I am trying to render a single cube (voxel) in the center of the screen, through OpenGL with GLSL on Mac I begin by setting up everything using glut glutInit(&argc, argv); glutInitDisplayMode(GLUT_RGBA|GLUT_ALPHA|GLUT_DOUBLE|GLUT_DEPTH); glutInitWindowSize(DEFAULT_WINDOW_WIDTH, DEFAULT_WINDOW_HEIGHT); glutCreateWindow("Cubez-OSX"); glutReshapeFunc(reshape); glutDisplayFunc(render); glutIdleFunc(idle); _electricSheepEngine=new ElectricSheepEngine(DEFAULT_WINDOW_WIDTH, DEFAULT_WINDOW_HEIGHT); _electricSheepEngine->initWorld(); glutMainLoop(); Then inside the engine init camera & projection matrices: cameraPosition=glm::vec3(2,2,2); cameraTarget=glm::vec3(0,0,0); cameraUp=glm::vec3(0,0,1); glm::vec3 cameraDirection=glm::normalize(cameraPosition-cameraTarget); cameraRight=glm::cross(cameraDirection, cameraUp); cameraRight.z=0; view=glm::lookAt(cameraPosition, cameraTarget, cameraUp); lensAngle=45.0f; aspectRatio=1.0*(windowWidth/windowHeight); nearClippingPlane=0.1f; farClippingPlane=100.0f; projection=glm::perspective(lensAngle, aspectRatio, nearClippingPlane, farClippingPlane); then init shaders and check compilation and bound attributes & uniforms to be correctly bound (my previous question) These are my two shaders, vertex: #version 120 attribute vec3 position; attribute vec3 inColor; uniform mat4 mvp; varying vec3 fragColor; void main(void){ fragColor = inColor; gl_Position = mvp * vec4(position, 1.0); } and fragment: #version 120 varying vec3 fragColor; void main(void) { gl_FragColor = vec4(fragColor,1.0); } init the cube: setPosition(glm::vec3(0,0,0)); struct voxelData data[]={ //front face {{-1.0, -1.0, 1.0}, {0.0, 0.0, 1.0}}, {{ 1.0, -1.0, 1.0}, {0.0, 1.0, 1.0}}, {{ 1.0, 1.0, 1.0}, {0.0, 0.0, 1.0}}, {{-1.0, 1.0, 1.0}, {0.0, 1.0, 1.0}}, //back face {{-1.0, -1.0, -1.0}, {0.0, 0.0, 1.0}}, {{ 1.0, -1.0, -1.0}, {0.0, 1.0, 1.0}}, {{ 1.0, 1.0, -1.0}, {0.0, 0.0, 1.0}}, {{-1.0, 1.0, -1.0}, {0.0, 1.0, 1.0}} }; glGenBuffers(1, &modelVerticesBufferObject); glBindBuffer(GL_ARRAY_BUFFER, modelVerticesBufferObject); glBufferData(GL_ARRAY_BUFFER, sizeof(data), data, GL_STATIC_DRAW); glBindBuffer(GL_ARRAY_BUFFER, 0); const GLubyte indices[] = { // Front 0, 1, 2, 2, 3, 0, // Back 4, 6, 5, 4, 7, 6, // Left 2, 7, 3, 7, 6, 2, // Right 0, 4, 1, 4, 1, 5, // Top 6, 2, 1, 1, 6, 5, // Bottom 0, 3, 7, 0, 7, 4 }; glGenBuffers(1, &modelFacesBufferObject); glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, modelFacesBufferObject); glBufferData(GL_ELEMENT_ARRAY_BUFFER, sizeof(indices), indices, GL_STATIC_DRAW); glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, 0); and then the render call: glClearColor(0.52, 0.8, 0.97, 1.0); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glEnable(GL_DEPTH_TEST); //use the shader glUseProgram(shaderProgram); //enable attributes in program glEnableVertexAttribArray(shaderAttribute_position); glEnableVertexAttribArray(shaderAttribute_color); //model matrix using model position vector glm::mat4 mvp=projection*view*voxel->getModelMatrix(); glUniformMatrix4fv(shaderAttribute_mvp, 1, GL_FALSE, glm::value_ptr(mvp)); glBindBuffer(GL_ARRAY_BUFFER, voxel->modelVerticesBufferObject); glVertexAttribPointer(shaderAttribute_position, // attribute 3, // number of elements per vertex, here (x,y) GL_FLOAT, // the type of each element GL_FALSE, // take our values as-is sizeof(struct voxelData), // coord every (sizeof) elements 0 // offset of first element ); glBindBuffer(GL_ARRAY_BUFFER, voxel->modelVerticesBufferObject); glVertexAttribPointer(shaderAttribute_color, // attribute 3, // number of colour elements per vertex, here (x,y) GL_FLOAT, // the type of each element GL_FALSE, // take our values as-is sizeof(struct voxelData), // coord every (sizeof) elements (GLvoid *)(offsetof(struct voxelData, color3D)) // offset of colour data ); //draw the model by going through its elements array glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, voxel->modelFacesBufferObject); int bufferSize; glGetBufferParameteriv(GL_ELEMENT_ARRAY_BUFFER, GL_BUFFER_SIZE, &bufferSize); glDrawElements(GL_TRIANGLES, bufferSize/sizeof(GLushort), GL_UNSIGNED_SHORT, 0); //close up the attribute in program, no more need glDisableVertexAttribArray(shaderAttribute_position); glDisableVertexAttribArray(shaderAttribute_color); but on screen all I get is the clear color :$ I generate my model matrix using: modelMatrix=glm::translate(glm::mat4(1.0), position); which in debug turns out to be for the position of (0,0,0): |1, 0, 0, 0| |0, 1, 0, 0| |0, 0, 1, 0| |0, 0, 0, 1| Sorry for such a question, I know it is annoying to look at someone's code, but I promise I have tried to debug around and figure it out as much as I can, and can't come to a solution Help a noob please? EDIT: Full source here, if anyone wants

    Read the article

  • 2D Tile Based Collision Detection

    - by MrPlosion1243
    There are a lot of topics about this and it seems each one addresses a different problem, this topic does the same. I was looking into tile collision detection and found this where David Gouveia explains a great way to get around the person's problem by separating the two axis. So I implemented the solution and it all worked perfectly from all the testes I through at it. Then I implemented more advanced platforming physics and the collision detection broke down. Unfortunately I have not been able to get it to work again which is where you guys come in :)! I will present the code first: public void Update(GameTime gameTime) { if(Input.GetKeyDown(Keys.A)) { velocity.X -= moveAcceleration; } else if(Input.GetKeyDown(Keys.D)) { velocity.X += moveAcceleration; } if(Input.GetKeyDown(Keys.Space)) { if((onGround && isPressable) || (!onGround && airTime <= maxAirTime && isPressable)) { onGround = false; airTime += (float)gameTime.ElapsedGameTime.TotalSeconds; velocity.Y = initialJumpVelocity * (1.0f - (float)Math.Pow(airTime / maxAirTime, Math.PI)); } } else if(Input.GetKeyReleased(Keys.Space)) { isPressable = false; } if(onGround) { velocity.X *= groundDrag; velocity.Y = 0.0f; } else { velocity.X *= airDrag; velocity.Y += gravityAcceleration; } velocity.Y = MathHelper.Clamp(velocity.Y, -maxFallSpeed, maxFallSpeed); velocity.X = MathHelper.Clamp(velocity.X, -maxMoveSpeed, maxMoveSpeed); position += velocity * (float)gameTime.ElapsedGameTime.TotalSeconds; position = new Vector2((float)Math.Round(position.X), (float)Math.Round(position.Y)); if(Math.Round(velocity.X) != 0.0f) { HandleCollisions2(Direction.Horizontal); } if(Math.Round(velocity.Y) != 0.0f) { HandleCollisions2(Direction.Vertical); } } private void HandleCollisions2(Direction direction) { int topTile = (int)Math.Floor((float)Bounds.Top / Tile.PixelTileSize); int bottomTile = (int)Math.Ceiling((float)Bounds.Bottom / Tile.PixelTileSize) - 1; int leftTile = (int)Math.Floor((float)Bounds.Left / Tile.PixelTileSize); int rightTile = (int)Math.Ceiling((float)Bounds.Right / Tile.PixelTileSize) - 1; for(int x = leftTile; x <= rightTile; x++) { for(int y = topTile; y <= bottomTile; y++) { Rectangle tileBounds = new Rectangle(x * Tile.PixelTileSize, y * Tile.PixelTileSize, Tile.PixelTileSize, Tile.PixelTileSize); Vector2 depth; if(Tile.IsSolid(x, y) && Intersects(tileBounds, direction, out depth)) { if(direction == Direction.Horizontal) { position.X += depth.X; } else { onGround = true; isPressable = true; airTime = 0.0f; position.Y += depth.Y; } } } } } From the code you can see when velocity.X is not equal to zero the HandleCollisions() Method is called along the horizontal axis and likewise for the vertical axis. When velocity.X is not equal to zero and velocity.Y is equal to zero it works fine. When velocity.Y is not equal to zero and velocity.X is equal to zero everything also works fine. However when both axis are not equal to zero that's when it doesn't work and I don't know why. I basically teleport to the left side of a tile when both axis are not equal to zero and there is a air block next to me. Hopefully someone can see the problem with this because I sure don't as far as I'm aware nothing has even changed from what I'm doing to what the linked post's solution is doing. Thanks.

    Read the article

  • IrrKlang with Ogre

    - by Vinnie
    I'm trying to set up sound in my Ogre3D project. I have installed irrKlang 1.4.0 and added it's include and lib directories to my projects VC++ Include and Library directories, but I'm still getting a Linker error when I attempt to build. Any suggestions? (Error 4007 error LNK2019: unresolved external symbol "__declspec(dllimport) class irrklang::ISoundEngine * __cdecl irrklang::createIrrKlangDevice(enum irrklang::E_SOUND_OUTPUT_DRIVER,int,char const *,char const *)" (_imp?createIrrKlangDevice@irrklang@@YAPAVISoundEngine@1@W4E_SOUND_OUTPUT_DRIVER@1@HPBD1@Z) referenced in function "public: __thiscall SoundManager::SoundManager(void)" (??0SoundManager@@QAE@XZ)

    Read the article

  • Unity Particle System collision detection problem

    - by Krav
    I'm using Unity 3.5.5f3 wich has the Shuriken particle system. I've made a blood particle system based on Unity's demos. (Exploding paint [Blood]) The blood is flowing and when it collides with a Plane Transform wich I've created a small pool of blood spawns as a Collision Sub Emitter. My main problem is that when I want to add another object to collide it just doesn't want to work. When I create a cube, and set it as a collision plane the collision will only occur at the half of the cube. I want this to happen: When it reaches the cube's surface the sub emmiter activates, and when the surface is horizontal it appears horizontally, and if it's vertical then vertically. Now it just appears horizontally everytime like in the picture. How could I solve it?

    Read the article

  • Tool for creating complex paths?

    - by TerryB
    I want to create some fairly complex predefined paths for my AI sprites to follow. I'll need to use curves, splines etc to get the effect I want. Is there a drawing tool out there that will allow me to draw such curves, "mesh" them by placing lots of points along them at some defined density and then output the coordinates of all of those points for me? I could write this tool myself but hopefully one of the drawing packages can do this? Cheers!

    Read the article

  • Cocos2d and Body with few collision shapes using chipmunk

    - by Eimantas
    I'm using Cocos2d (0.99.5) with chipmunk physics engine. Currently I'm trying to place a body into space which is combined from few circle shapes. Let's say I have a corresponding sprite image with displays atom (nucleus + 3 electrons around it. Something like this without orbit lines). In it's simplest form - only one circle shape at the center should be enough which would detect collisions from other objects with nucleus. Now I'd like to add other circle shapes for each electron. How can I do that? Now when I add those shapes to the body and add the body into chipmunk space - the shapes (together with the body/sprite) start flickering and spinning with no recognizable pattern (or reason for that matter).

    Read the article

  • 2D SAT How to find collision center or point or area?

    - by Felipe Cypriano
    I've just implemented collision detection using SAT and this article as reference to my implementation. The detection is working as expected but I need to know where both rectangles are colliding. I need to find the center of the intersection, the black point on the image above. I've found some articles about this but they all involve avoiding the overlap or some kind of velocity, I don't need this. I just need to put a image on top of it. Like two cars crashed so I put an image on top of the collision. Any ideas? ## Update The information I've about the rectangles are the four points that represents them, the upper right, upper left, lower right and lower left coordinates. I'm trying to find an algorithm that can give me the intersection of these points.

    Read the article

  • Why does my sprite glitch when moving? [closed]

    - by rphello101
    Using Slick 2D/Java, I'm using the mouse to rotate a sprite and WASD to move it (A and D are used to strafe). I finally got the directional keys and rotation to work in sync, but I'm having problems with sporadic movement. It seems that the move speed is not always set to the value I have it at. Sometimes the sprite with just shoot across the screen. Furthermore, it seems that at 0 degrees, when the left key is pressed, the sprite moves backwards, not to the left. There also seems to be quite a bit of glitching when two keys are pressed, like left and up. Anyone see anything obvious? Here is the rotational code: int mX = Mouse.getX(); int mY = HEIGHT - Mouse.getY(); int pX = sprite.x+sprite.image.getWidth()/2; int pY = sprite.y+sprite.image.getHeight()/2; double mAng; if(mX!=pX){ mAng = Math.toDegrees(Math.atan2(mY - pY, mX - pX)); if(mAng==0 && mX<=pX) mAng=180; } else{ if(mY>pY) mAng=90; else mAng=270; } sprite.angle = mAng; sprite.image.setRotation((float) mAng); Movement code: Input input = gc.getInput(); Vector2f direction = new Vector2f(); Vector2f velocity = new Vector2f(); Vector2f left; Vector2f right; direction.x = (float) Math.cos(Math.toRadians(sprite.angle)); direction.y = (float) Math.sin(Math.toRadians(sprite.angle)); if(direction.length()>0) direction = direction.normalise(); left = new Vector2f(-direction.y, direction.x); right = new Vector2f(direction.y, -direction.x); velocity.x = (float) (direction.x * sprite.moveSpeed); velocity.y = (float) (direction.y * sprite.moveSpeed); if(input.isKeyDown(sprite.up)){ sprite.x += velocity.x*delta; sprite.y += velocity.y*delta; }if (input.isKeyDown(sprite.down)){ sprite.x -= velocity.x*delta; sprite.y -= velocity.y*delta; }if (input.isKeyDown(sprite.left)){ sprite.x += left.x * sprite.moveSpeed * delta; sprite.y += left.y * sprite.moveSpeed * delta; }if (input.isKeyDown(sprite.right)){ sprite.x += right.x * sprite.moveSpeed * delta; sprite.y += right.y * sprite.moveSpeed * delta; }

    Read the article

  • how can I specify interleaved vertex attributes and vertex indices

    - by freefallr
    I'm writing a generic ShaderProgram class that compiles a set of Shader objects, passes args to the shader (like vertex position, vertex normal, tex coords etc), then links the shader components into a shader program, for use with glDrawArrays. My vertex data already exists in a VertexBufferObject that uses the following data structure to create a vertex buffer: class CustomVertex { public: float m_Position[3]; // x, y, z // offset 0, size = 3*sizeof(float) float m_TexCoords[2]; // u, v // offset 3*sizeof(float), size = 2*sizeof(float) float m_Normal[3]; // nx, ny, nz; float colour[4]; // r, g, b, a float padding[20]; // padded for performance }; I've already written a working VertexBufferObject class that creates a vertex buffer object from an array of CustomVertex objects. This array is said to be interleaved. It renders successfully with the following code: void VertexBufferObject::Draw() { if( ! m_bInitialized ) return; glBindBuffer( GL_ARRAY_BUFFER, m_nVboId ); glBindBuffer( GL_ELEMENT_ARRAY_BUFFER, m_nVboIdIndex ); glEnableClientState( GL_VERTEX_ARRAY ); glEnableClientState( GL_TEXTURE_COORD_ARRAY ); glEnableClientState( GL_NORMAL_ARRAY ); glEnableClientState( GL_COLOR_ARRAY ); glVertexPointer( 3, GL_FLOAT, sizeof(CustomVertex), ((char*)NULL + 0) ); glTexCoordPointer(3, GL_FLOAT, sizeof(CustomVertex), ((char*)NULL + 12)); glNormalPointer(GL_FLOAT, sizeof(CustomVertex), ((char*)NULL + 20)); glColorPointer(3, GL_FLOAT, sizeof(CustomVertex), ((char*)NULL + 32)); glDrawElements( GL_TRIANGLES, m_nNumIndices, GL_UNSIGNED_INT, ((char*)NULL + 0) ); glDisableClientState( GL_VERTEX_ARRAY ); glDisableClientState( GL_TEXTURE_COORD_ARRAY ); glDisableClientState( GL_NORMAL_ARRAY ); glDisableClientState( GL_COLOR_ARRAY ); glBindBuffer( GL_ARRAY_BUFFER, 0 ); glBindBuffer( GL_ELEMENT_ARRAY_BUFFER, 0 ); } Back to the Vertex Array Object though. My code for creating the Vertex Array object is as follows. This is performed before the ShaderProgram runtime linking stage, and no glErrors are reported after its steps. // Specify the shader arg locations (e.g. their order in the shader code) for( int n = 0; n < vShaderArgs.size(); n ++) glBindAttribLocation( m_nProgramId, n, vShaderArgs[n].sFieldName.c_str() ); // Create and bind to a vertex array object, which stores the relationship between // the buffer and the input attributes glGenVertexArrays( 1, &m_nVaoHandle ); glBindVertexArray( m_nVaoHandle ); // Enable the vertex attribute array (we're using interleaved array, since its faster) glBindBuffer( GL_ARRAY_BUFFER, vShaderArgs[0].nVboId ); glBindBuffer( GL_ELEMENT_ARRAY_BUFFER, vShaderArgs[0].nVboIndexId ); // vertex data for( int n = 0; n < vShaderArgs.size(); n ++ ) { glEnableVertexAttribArray(n); glVertexAttribPointer( n, vShaderArgs[n].nFieldSize, GL_FLOAT, GL_FALSE, vShaderArgs[n].nStride, (GLubyte *) NULL + vShaderArgs[n].nFieldOffset ); AppLog::Ref().OutputGlErrors(); } This doesn't render correctly at all. I get a pattern of white specks onscreen, in the shape of the terrain rectangle, but there are no regular lines etc. Here's the code I use for rendering: void ShaderProgram::Draw() { using namespace AntiMatter; if( ! m_nShaderProgramId || ! m_nVaoHandle ) { AppLog::Ref().LogMsg("ShaderProgram::Draw() Couldn't draw object, as initialization of ShaderProgram is incomplete"); return; } glUseProgram( m_nShaderProgramId ); glBindVertexArray( m_nVaoHandle ); glDrawArrays( GL_TRIANGLES, 0, m_nNumTris ); glBindVertexArray(0); glUseProgram(0); } Can anyone see errors or omissions in either the VAO creation code or rendering code? thanks!

    Read the article

  • XNA - Finding boundaries in isometric tilemap

    - by Yheeky
    I have an issue with my 2D isometric engine. I'm using my own 2D camera class which works with matrices and need to find the tilemaps boundaries so the user always sees the map. Currently my map size is 100x100 (with 128x128 tiles) so the calculation (e.g. for the right boundary) is: var maxX = (TileMap.MapWidth + 1) * (TileMap.TileWidth / 2) - ViewSize.X; var maxX = (100 + 1) * (128 / 2) - 1360; // = 5104 pixels. This works fine while having scale factor of 1.0f but not for any other zoom factor. When I zoom out to 0.9f the right border should be at approx. 4954. I´m using the following code for transformation but I always get a wrong value: var maxXVector = new Vector2(maxX, 0); var maxXTransformed = Vector2.Transform(maxXVector, tempTransform).X; The result is 4593. Does anyone of you have an idea what I´m during wrong? Thanks for your help! Yheeky

    Read the article

  • Why do the order of uniforms gets changed by the compiler?

    - by Aybe
    I have the following shader, everything works fine when setting the value of one of the matrices but I've discovered that getting a value back is incorrect for View and Projection, they are in reverse order. #version 430 precision highp float; layout (location = 0) uniform mat4 Model; layout (location = 1) uniform mat4 View; layout (location = 2) uniform mat4 Projection; layout (location = 0) in vec3 in_position; layout (location = 1) in vec4 in_color; out vec4 out_color; void main(void) { gl_Position = Projection * View * Model * vec4(in_position, 1.0); out_color = in_color; } When querying their location they are effectively reversed, I did a small test by renaming View to Piew which puts it before Projection if sorted alphabetically and the order is correct. Now if I do remove layout (location = ...) from the uniforms, the problem disappears !? I am starting to think that this is a driver bug as explained in the wiki. Do you know why the order of the uniforms is changed whenever the shader is compiled ? (using an AMD HD7850)

    Read the article

  • 3d vertex translated onto 2d viewport

    - by Dan Leidal
    I have a spherical world defined by simple trigonometric functions to create triangles that are relatively similar in size and shape throughout. What I want to be able to do is use mouse input to target a range of vertices in the area around the mouse click in order to manipulate these vertices in real time. I read a post on this forum regarding translating 3d world coordinates into the 2d viewport.. it recommended that you should multiply the world vector coordinates by the viewport and then the projection, but they didn't include any code examples, and suffice to say i couldn't get any good results. Further information.. I am using a lookat method for the viewport. Does this cause a problem, and if so is there a solution? If this isn't the problem, does anyone have a simple code example illustrating translating one vertex in a 3d world into a 2d viewspace? I am using XNA.

    Read the article

  • HighPoint RocketRAID 62x Controller

    - by TeXnewbie
    I have the subject card recently installed in Ubuntu 12.04.1 LTS (GNU/Linux 3.2.0-31-generic x86_64). See partial lspci -vv listing below (complete listing played havoc with pre tags): 03:00.0 RAID bus controller: HighPoint Technologies, Inc. Device 0622 (rev 01) Subsystem: HighPoint Technologies, Inc. Device 0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 9c00 [size=8] Region 1: I/O ports at 9800 [size=4] Region 2: I/O ports at 9400 [size=8] Region 3: I/O ports at 9000 [size=4] Region 4: I/O ports at 8c00 [size=16] Region 5: Memory at fdbff000 (32-bit, non-prefetchable) [size=2K] Expansion ROM at fdbe0000 [disabled] [size=64K] Capabilities: I followed instructions I found at https://help.ubuntu.com/community/RocketRaid to compile the drivers for it, and although performing the process described there seemed to work fine with no noticeable errors, when I rebooted after performing that procedure I could not boot. During dkms steps, I noticed messages indicating that (If next boot fails, revert to initrd.img-3.2.0-31-generic.old-dkms image) update-initramfs................ so I booted using a Ubuntu 12.10 LiveDVD and reverted to the old-dkms initrd.img as suggested above, but this failed to repair the boot problem. Ultimately, I used https://help.ubuntu.com/community/Boot-Repair in Ubuntu-Secure-Remix to fix the boot problem and was able to boot normally again, but now with the newly generated initrd.img in place again (which now boots normally), when I modprobe the rr62x kernel module, I immediately get a hard crash with messages to console about a kernel paging request that seems to have caused the problem. I've tried on multiple occasions now to use the newly built kernel module so as to allow me to use an eSATA port multiplier plugged into the card, but to no avail. Any suggestions on fixes or workarounds (I've read that some of the HighPoint cards (2720SGL) seem to work as a host bus adapter and thus may not need a custom driver, but that seems not to be the case for mine) would be most appreciated. My goal is to use the card as described here and with software RAID mdadm utilities. If necessary, I can hand-copy the console messages after the hard crash into a follow-up message, but I obviously can't do a cut/paste. I'll gladly provide any other details that are needed, but not sure what those would be at this point, so I'll refrain from adding other details for now. Thanks in advance for any help.

    Read the article

  • How to use the zoom gesture in libgdx?

    - by user3452725
    I found the example code for the GestureListener class, but I don't understand the zoom method: private float initialScale = 1; public boolean zoom (float originalDistance, float currentDistance) { float ratio = originalDistance / currentDistance; //I get this camera.zoom = initialScale * ratio; //This doesn't make sense to me because it seems like every time you pinch to zoom, it resets to the original zoom which is 1. So basically it wouldn't 'save' the zoom right? System.out.println(camera.zoom); //Prints the camera zoom return false; } Am I not interpreting this right?

    Read the article

  • Is there any hueristic to polygonize a closed 2d-raster shape with n triangles?

    - by Arthur Wulf White
    Lets say we have a 2d image black on white that shows a closed geometric shape. Is there any (not naive brute force) algorithm that approximates that shape as closely as possible with n triangles? If you want a formal definition for as closely as possible: Approximate the shape with a polygon that when rendered into a new 2d image will match the largest number of pixels possible with the original image.

    Read the article

  • Where can I find free or buy "next-gen" 3D Assets?

    - by Valmond
    Usually I buy 3D Assets from sites like turbosquid.com or similar. My problem is that I have lately implemented glow, normal maps, specular (and specular power) maps and reflection maps and I can't find any models that use those techniques. So where can I find / buy "next gen" assets (at least models/items with a normal map)? I have checked for similar posts but those I found are about either free only or 2D or 'ordinary' 3D so I hope this is not a duplicate.

    Read the article

  • Camera doesnt move on opengl qt

    - by hugo
    Here is my code, as my subject indicates i have implemented a camera but i couldnt make it move,Thanks in advance. #define PI_OVER_180 0.0174532925f define GL_CLAMP_TO_EDGE 0x812F include "metinalifeyyaz.h" include include include include include include include metinalifeyyaz::metinalifeyyaz(QWidget *parent) : QGLWidget(parent) { this->setFocusPolicy(Qt:: StrongFocus); time = QTime::currentTime(); timer = new QTimer(this); timer->setSingleShot(true); connect(timer, SIGNAL(timeout()), this, SLOT(updateGL())); xpos = yrot = zpos = 0; walkbias = walkbiasangle = lookupdown = 0.0f; keyUp = keyDown = keyLeft = keyRight = keyPageUp = keyPageDown = false; } void metinalifeyyaz::drawBall() { //glTranslatef(6,0,4); glutSolidSphere(0.10005,300,30); } metinalifeyyaz:: ~metinalifeyyaz(){ glDeleteTextures(1,texture); } void metinalifeyyaz::initializeGL(){ glShadeModel(GL_SMOOTH); glClearColor(1.0,1.0,1.0,0.5); glClearDepth(1.0f); glEnable(GL_DEPTH_TEST); glEnable(GL_TEXTURE_2D); glDepthFunc(GL_LEQUAL); glClearColor(1.0,1.0,1.0,1.0); glShadeModel(GL_SMOOTH); GLfloat mat_specular[]={1.0,1.0,1.0,1.0}; GLfloat mat_shininess []={30.0}; GLfloat light_position[]={1.0,1.0,1.0}; glMaterialfv(GL_FRONT, GL_SPECULAR, mat_specular); glMaterialfv(GL_FRONT,GL_SHININESS,mat_shininess); glLightfv(GL_LIGHT0, GL_POSITION, light_position); glEnable(GL_LIGHT0); glEnable(GL_LIGHTING); QImage img1 = convertToGLFormat(QImage(":/new/prefix1/halisaha2.bmp")); QImage img2 = convertToGLFormat(QImage(":/new/prefix1/white.bmp")); glGenTextures(2,texture); glBindTexture(GL_TEXTURE_2D, texture[0]); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, img1.width(), img1.height(), 0, GL_RGBA, GL_UNSIGNED_BYTE, img1.bits()); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glBindTexture(GL_TEXTURE_2D, texture[1]); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, img2.width(), img2.height(), 0, GL_RGBA, GL_UNSIGNED_BYTE, img2.bits()); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glHint(GL_PERSPECTIVE_CORRECTION_HINT, GL_NICEST); // Really nice perspective calculations } void metinalifeyyaz::resizeGL(int w, int h){ if(h==0) h=1; glViewport(0,0,w,h); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(45.0f, static_cast<GLfloat>(w)/h,0.1f,100.0f); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); } void metinalifeyyaz::paintGL(){ movePlayer(); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glLoadIdentity(); GLfloat xtrans = -xpos; GLfloat ytrans = -walkbias - 0.50f; GLfloat ztrans = -zpos; GLfloat sceneroty = 360.0f - yrot; glLoadIdentity(); glRotatef(lookupdown, 1.0f, 0.0f, 0.0f); glRotatef(sceneroty, 0.0f, 1.0f, 0.0f); glTranslatef(xtrans, ytrans+50, ztrans-130); glLoadIdentity(); glTranslatef(1.0f,0.0f,-18.0f); glRotatef(45,1,0,0); drawScene(); int delay = time.msecsTo(QTime::currentTime()); if (delay == 0) delay = 1; time = QTime::currentTime(); timer->start(qMax(0,10 - delay)); } void metinalifeyyaz::movePlayer() { if (keyUp) { xpos -= sin(yrot * PI_OVER_180) * 0.5f; zpos -= cos(yrot * PI_OVER_180) * 0.5f; if (walkbiasangle >= 360.0f) walkbiasangle = 0.0f; else walkbiasangle += 7.0f; walkbias = sin(walkbiasangle * PI_OVER_180) / 10.0f; } else if (keyDown) { xpos += sin(yrot * PI_OVER_180)*0.5f; zpos += cos(yrot * PI_OVER_180)*0.5f ; if (walkbiasangle <= 7.0f) walkbiasangle = 360.0f; else walkbiasangle -= 7.0f; walkbias = sin(walkbiasangle * PI_OVER_180) / 10.0f; } if (keyLeft) yrot += 0.5f; else if (keyRight) yrot -= 0.5f; if (keyPageUp) lookupdown -= 0.5; else if (keyPageDown) lookupdown += 0.5; } void metinalifeyyaz::keyPressEvent(QKeyEvent *event) { switch (event->key()) { case Qt::Key_Escape: close(); break; case Qt::Key_F1: setWindowState(windowState() ^ Qt::WindowFullScreen); break; default: QGLWidget::keyPressEvent(event); case Qt::Key_PageUp: keyPageUp = true; break; case Qt::Key_PageDown: keyPageDown = true; break; case Qt::Key_Left: keyLeft = true; break; case Qt::Key_Right: keyRight = true; break; case Qt::Key_Up: keyUp = true; break; case Qt::Key_Down: keyDown = true; break; } } void metinalifeyyaz::changeEvent(QEvent *event) { switch (event->type()) { case QEvent::WindowStateChange: if (windowState() == Qt::WindowFullScreen) setCursor(Qt::BlankCursor); else unsetCursor(); break; default: break; } } void metinalifeyyaz::keyReleaseEvent(QKeyEvent *event) { switch (event->key()) { case Qt::Key_PageUp: keyPageUp = false; break; case Qt::Key_PageDown: keyPageDown = false; break; case Qt::Key_Left: keyLeft = false; break; case Qt::Key_Right: keyRight = false; break; case Qt::Key_Up: keyUp = false; break; case Qt::Key_Down: keyDown = false; break; default: QGLWidget::keyReleaseEvent(event); } } void metinalifeyyaz::drawScene(){ glBegin(GL_QUADS); glNormal3f(0.0f,0.0f,1.0f); // glColor3f(0,0,1); //back glVertex3f(-6,0,-4); glVertex3f(-6,-0.5,-4); glVertex3f(6,-0.5,-4); glVertex3f(6,0,-4); glEnd(); glBegin(GL_QUADS); glNormal3f(0.0f,0.0f,-1.0f); //front glVertex3f(6,0,4); glVertex3f(6,-0.5,4); glVertex3f(-6,-0.5,4); glVertex3f(-6,0,4); glEnd(); glBegin(GL_QUADS); glNormal3f(-1.0f,0.0f,0.0f); // glColor3f(0,0,1); //left glVertex3f(-6,0,4); glVertex3f(-6,-0.5,4); glVertex3f(-6,-0.5,-4); glVertex3f(-6,0,-4); glEnd(); glBegin(GL_QUADS); glNormal3f(1.0f,0.0f,0.0f); // glColor3f(0,0,1); //right glVertex3f(6,0,-4); glVertex3f(6,-0.5,-4); glVertex3f(6,-0.5,4); glVertex3f(6,0,4); glEnd(); glBindTexture(GL_TEXTURE_2D, texture[0]); glBegin(GL_QUADS); glNormal3f(0.0f,1.0f,0.0f);//top glTexCoord2f(1.0f,0.0f); glVertex3f(6,0,-4); glTexCoord2f(1.0f,1.0f); glVertex3f(6,0,4); glTexCoord2f(0.0f,1.0f); glVertex3f(-6,0,4); glTexCoord2f(0.0f,0.0f); glVertex3f(-6,0,-4); glEnd(); glBegin(GL_QUADS); glNormal3f(0.0f,-1.0f,0.0f); //glColor3f(0,0,1); //bottom glVertex3f(6,-0.5,-4); glVertex3f(6,-0.5,4); glVertex3f(-6,-0.5,4); glVertex3f(-6,-0.5,-4); glEnd(); // glPushMatrix(); glBindTexture(GL_TEXTURE_2D, texture[1]); glBegin(GL_QUADS); glNormal3f(1.0f,0.0f,0.0f); glTexCoord2f(1.0f,0.0f); //right far goal post front face glVertex3f(5,0.5,-0.95); glTexCoord2f(1.0f,1.0f); glVertex3f(5,0,-0.95); glTexCoord2f(0.0f,1.0f); glVertex3f(5,0,-1); glTexCoord2f(0.0f,0.0f); glVertex3f(5, 0.5, -1); glColor3f(1,1,1); //right far goal post back face glVertex3f(5.05,0.5,-0.95); glVertex3f(5.05,0,-0.95); glVertex3f(5.05,0,-1); glVertex3f(5.05, 0.5, -1); glColor3f(1,1,1); //right far goal post left face glVertex3f(5,0.5,-1); glVertex3f(5,0,-1); glVertex3f(5.05,0,-1); glVertex3f(5.05, 0.5, -1); glColor3f(1,1,1); //right far goal post right face glVertex3f(5.05,0.5,-0.95); glVertex3f(5.05,0,-0.95); glVertex3f(5,0,-0.95); glVertex3f(5, 0.5, -0.95); glColor3f(1,1,1); //right near goal post front face glVertex3f(5,0.5,0.95); glVertex3f(5,0,0.95); glVertex3f(5,0,1); glVertex3f(5,0.5, 1); glColor3f(1,1,1); //right near goal post back face glVertex3f(5.05,0.5,0.95); glVertex3f(5.05,0,0.95); glVertex3f(5.05,0,1); glVertex3f(5.05,0.5, 1); glColor3f(1,1,1); //right near goal post left face glVertex3f(5,0.5,1); glVertex3f(5,0,1); glVertex3f(5.05,0,1); glVertex3f(5.05,0.5, 1); glColor3f(1,1,1); //right near goal post right face glVertex3f(5.05,0.5,0.95); glVertex3f(5.05,0,0.95); glVertex3f(5,0,0.95); glVertex3f(5,0.5, 0.95); glColor3f(1,1,1); //right crossbar front face glVertex3f(5,0.55,-1); glVertex3f(5,0.55,1); glVertex3f(5,0.5,1); glVertex3f(5,0.5,-1); glColor3f(1,1,1); //right crossbar back face glVertex3f(5.05,0.55,-1); glVertex3f(5.05,0.55,1); glVertex3f(5.05,0.5,1); glVertex3f(5.05,0.5,-1); glColor3f(1,1,1); //right crossbar bottom face glVertex3f(5.05,0.5,-1); glVertex3f(5.05,0.5,1); glVertex3f(5,0.5,1); glVertex3f(5,0.5,-1); glColor3f(1,1,1); //right crossbar top face glVertex3f(5.05,0.55,-1); glVertex3f(5.05,0.55,1); glVertex3f(5,0.55,1); glVertex3f(5,0.55,-1); glColor3f(1,1,1); //left far goal post front face glVertex3f(-5,0.5,-0.95); glVertex3f(-5,0,-0.95); glVertex3f(-5,0,-1); glVertex3f(-5, 0.5, -1); glColor3f(1,1,1); //right far goal post back face glVertex3f(-5.05,0.5,-0.95); glVertex3f(-5.05,0,-0.95); glVertex3f(-5.05,0,-1); glVertex3f(-5.05, 0.5, -1); glColor3f(1,1,1); //right far goal post left face glVertex3f(-5,0.5,-1); glVertex3f(-5,0,-1); glVertex3f(-5.05,0,-1); glVertex3f(-5.05, 0.5, -1); glColor3f(1,1,1); //right far goal post right face glVertex3f(-5.05,0.5,-0.95); glVertex3f(-5.05,0,-0.95); glVertex3f(-5,0,-0.95); glVertex3f(-5, 0.5, -0.95); glColor3f(1,1,1); //left near goal post front face glVertex3f(-5,0.5,0.95); glVertex3f(-5,0,0.95); glVertex3f(-5,0,1); glVertex3f(-5,0.5, 1); glColor3f(1,1,1); //right near goal post back face glVertex3f(-5.05,0.5,0.95); glVertex3f(-5.05,0,0.95); glVertex3f(-5.05,0,1); glVertex3f(-5.05,0.5, 1); glColor3f(1,1,1); //right near goal post left face glVertex3f(-5,0.5,1); glVertex3f(-5,0,1); glVertex3f(-5.05,0,1); glVertex3f(-5.05,0.5, 1); glColor3f(1,1,1); //right near goal post right face glVertex3f(-5.05,0.5,0.95); glVertex3f(-5.05,0,0.95); glVertex3f(-5,0,0.95); glVertex3f(-5,0.5, 0.95); glColor3f(1,1,1); //left crossbar front face glVertex3f(-5,0.55,-1); glVertex3f(-5,0.55,1); glVertex3f(-5,0.5,1); glVertex3f(-5,0.5,-1); glColor3f(1,1,1); //right crossbar back face glVertex3f(-5.05,0.55,-1); glVertex3f(-5.05,0.55,1); glVertex3f(-5.05,0.5,1); glVertex3f(-5.05,0.5,-1); glColor3f(1,1,1); //right crossbar bottom face glVertex3f(-5.05,0.5,-1); glVertex3f(-5.05,0.5,1); glVertex3f(-5,0.5,1); glVertex3f(-5,0.5,-1); glColor3f(1,1,1); //right crossbar top face glVertex3f(-5.05,0.55,-1); glVertex3f(-5.05,0.55,1); glVertex3f(-5,0.55,1); glVertex3f(-5,0.55,-1); glEnd(); // glPopMatrix(); // glPushMatrix(); // glTranslatef(0,0,0); // glutSolidSphere(0.10005,500,30); // glPopMatrix(); }

    Read the article

  • How to limit click'n'drag movement to an area?

    - by Vexille
    I apologize for the somewhat generic title. I'm really don't have much clue about how to accomplish what I'm trying to do, which is making it harder even to research a possible solution. I'm trying to implement a path marker of sorts (maybe there's a most suitable name for it, but this is the best I could come up with). In front of the player there will be a path marker, which will determine how the player will move once he finishes planning his turn. The player may click and drag the marker to the position they choose, but the marker can only be moved within a defined working area (the gray bit). So I'm now stuck with two problems: First of all, how exactly should I define that workable area? I can imagine maybe two vectors that have the player as a starting point to form the workable angle, and maybe those two arcs could come from circles that have their center where the player is, but I definetly don't know how to put this all together. And secondly, after I've defined the area where the marker can be placed, how can I enforce that the marker should only stay within that area? For example, if the player clicks and drags the marker around, it may move freely within the working area, but must not leave the boundaries of the area. So for example, if the player starts dragging the marker upwards, it will move upwards until it hits he end of the working area (first diagram below), but if after that the player starts dragging sideways, the marker must follow the drag while still within the area (second diagram below). I hope this wasn't all too confusing. Thanks, guys.

    Read the article

  • New way of integrating Openfeint in Cocos2d-x 0.12.0

    - by Ef Es
    I am trying to implement OpenFeint for Android in my cocos2d-x project. My approach so far has been creating a button that calls a static java method in class Bridge using jnihelper functions (jnihelper only accepts statics). Bridge has one singleton attribute of type OFAndroid, that is the class dynamically calling the Openfeint Api methods, and every method in the bridge just forwards it to the OFAndroid object. What I am trying to do now is to initialize the openfeint libraries in the main java class that is the one calling the static C++ libraries. My problem right now is that the initializing function void com.openfeint.api.OpenFeint.initialize(Context ctx, OpenFeintSettings settings, OpenFeintDelegate delegate) is not accepting the context parameter that I am giving him, which is a "this" reference to the main class. Main class extends from Cocos2dxActivity but I don't have any other that extends from Application. Any suggestions on fixing it or how to improve the architecture? EDIT: I am trying a new solution. Make the bridge class into an Application child, is called from Main object, initializes OpenFeint when created and it can call the OpenFeint functions instead of needing an additional class. The problem is I still get the error. 03-30 14:39:22.661: E/AndroidRuntime(9029): Caused by: java.lang.NullPointerException 03-30 14:39:22.661: E/AndroidRuntime(9029): at android.content.ContextWrapper.getPackageManager(ContextWrapper.java:85) 03-30 14:39:22.661: E/AndroidRuntime(9029): at com.openfeint.internal.OpenFeintInternal.validateManifest(OpenFeintInternal.java:885) 03-30 14:39:22.661: E/AndroidRuntime(9029): at com.openfeint.internal.OpenFeintInternal.initializeWithoutLoggingIn(OpenFeintInternal.java:829) 03-30 14:39:22.661: E/AndroidRuntime(9029): at com.openfeint.internal.OpenFeintInternal.initialize(OpenFeintInternal.java:852) 03-30 14:39:22.661: E/AndroidRuntime(9029): at com.openfeint.api.OpenFeint.initialize(OpenFeint.java:47) 03-30 14:39:22.661: E/AndroidRuntime(9029): at nurogames.fastfish.NuroFeint.onCreate(NuroFeint.java:23) 03-30 14:39:22.661: E/AndroidRuntime(9029): at nurogames.fastfish.FastFish.onCreate(FastFish.java:47) 03-30 14:39:22.661: E/AndroidRuntime(9029): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1069) 03-30 14:39:22.661: E/AndroidRuntime(9029): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2751)

    Read the article

  • Fast pixelshader 2D raytracing

    - by heishe
    I'd like to do a simple 2D shadow calculation algorithm by rendering my environment into a texture, and then use raytracing to determine what pixels of the texture are not visible to the point light (simply handed to the shader as a vec2 position) . A simple brute force algorithm per pixel would looks like this: line_segment = line segment between current pixel of texture and light source For each pixel in the texture: { if pixel is not just empty space && pixel is on line_segment output = black else output = normal color of the pixel } This is, of course, probably not the fastest way to do it. Question is: What are faster ways to do it or what are some optimizations that can be applied to this technique?

    Read the article

< Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >