Search Results

Search found 9688 results on 388 pages for 'external hdd'.

Page 333/388 | < Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >

• How do i Setup a Mac OS X Server - NameServer behind an Airport Extreme?

  - by basilmir

  I have a Mac mini server i want to setup to host a couple of things. My setup is as follows: The WAN connection (static IP and ISP nameservers) goes into the wan port of the Airport Extreme. The Mac mini server is connected to one of the ethernet ports. The mac mini will host my domain something.com. My settings so far: Airport Express gets: 96.x.x.x as the external static IP from the ISP 174.y.y.y as the nameserver Mac mini server always gets a reserved DHCP IP from the Airport Express: 10.0.1.3 is the server's ip 10.0.1.1 as the dns (this ip is the airport express itself) My dns server has an A record pointing to ns.something.com and a PTR doing the reverse. I've already added my 96.x.x.x to point ns.something.com with my registrar as attached. NOW: Nobody seems to be able to access my ns.something.com to resolve any of my records. From a any computer in my network I CAN see my ns and everything works. The outside on the other hand does not... it's as if the airport extreme which "holds" the exterior 94.x.x.x address doesn't pass DNS along to my 10.0.1.3 ns server. I have the server managing the airport. Isn't this supposed to work?

  Read the article

• How can I get mouse capture to work in virtualbox when I move guest window to second monitor?

  - by Dan

  I'm running VirtualBox on a Win7 host. Guest OS is Centos. My setup is a laptop (screen 1) with a huge external monitor (screen 2). I'm only telling Centos there is one monitor though. When I start up VirtualBox on screen 1, the mouse capture works fine. I don't have mouse integration because (I think) the kernel on Centos is too old to support it. That's fine, I don't mind doing the Right-Control thing. The problem I have is that when I drag the whole VM window over to my second monitor, the mouse capture doesn't work right anymore. I click inside the VM and can move the VM cursor a little bit, but I can't always get to the edges of the VM screen -- before I get all the way to an edge, the cursor will escape from the VM as if I had hit right-control. But it's still captured according to the icon, and if I then hit right-control, the guest cursor jumps to a different screen location. My workaround: if I have the VM window mostly on screen 2, but a small corner of it still on screen 1, then the mouse capture works correctly. Is there a setting to make this work better?

  Read the article

• Multiple SSL certificates on Apache using multiple public IPs - not working

  - by St. Even

  I need configure multiple SSL certificates on a single Apache server. I already know that I need multiple external IP addresses as I cannot use SNI (only running Apache 2.2.3 on this server). I assumed that I had everything configured correctly, unfortunately things are not working as they should (or maybe I should say, as I expected them to work)... In my httpd.conf I have: NameVirtualHost *:80 NameVirtualHost *:443 Lets say my public IP is 12.0.0.1 and my private IP is 192.168.0.1. When I use the public IP in my vhost my default website is being shown instead the one defined in my vhost, e.g.: <VirtualHost 12.0.0.1:443> ServerAdmin [email protected] ServerName blablabla.site.com DocumentRoot /data/sites/blablabla.site.com ErrorLog /data/sites/blablabla.site.com-error.log #CustomLog /data/sites/blablabla.site.com-access.log common SSLEngine On SSLCertificateFile /etc/httpd/conf/ssl/blablabla.site.com.crt SSLCertificateKeyFile /etc/httpd/conf/ssl/blablabla.site.com.key SSLCertificateChainFile /etc/httpd/conf/ssl/blablabla.site.com.ca-bundle <Location /> SSLRequireSSL On SSLVerifyDepth 1 SSLOptions +StdEnvVars +StrictRequire </Location> </VirtualHost> When I use the private IP in my vhost everything works as it should (the website defined in my vhost is being shown), e.g.: <VirtualHost 192.168.0.1:443> ...same as above... </VirtualHost> My server is listening on all interfaces: [root@grbictwebp02 httpd]# netstat -tulpn | grep :443 tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 5585/httpd What am I doing wrong? If I cannot get this to work I cannot continue to add the second SSL certificate on the other public IP... If more information is required just let me know!

  Read the article

• Efficient mirroring of directories using hardlinks

  - by zoqaeski

  I'm backing up my music collection on to a number of NTFS-formatted external hard-drives; however, as I store my main collection in FLAC and have my library on my laptop as MP3s to save space, I want to be able to back up both sets, because mass conversion between formats is time-consuming. The "music" directory can contain any format; the "mp3s" directory contains only MP3s converted from files in the "music" directory. The music collection on the laptop contains only MP3s, but they come from both sources. When I backup my laptop's library to the "mp3s" directory, I want to only copy across MP3 files that don't exist in the "music" directory; those that do should be hard-linked to the "music" directory. All directories have an identical hierarchy, sorted by artist, album, date, discnumber if applicable, etc, and I use a tagging editor to ensure consistency across all these locations. I'm also using a Linux computer, but keeping the music collections on NTFS-formatted partitions so that they are readable by both Linux and Windows. At the moment, I use the following command to perform the backups, but this is time-consuming due to the expensive nature of finding hard links. rsync -avu --progress --relative --ignore-existing --link-dest=../music/ **/*.mp3 /media/ntfspocket/mp3s Is there a way to perform this backup more efficiently, taking advantage of the directory hierarchy?

  Read the article

• Exchange 2010: Send emails via STMP with custom From address to outside the domain

  - by marsze

  The requirement(s): (1) Connect to Exchange via STMP and (2) basic authentication and send emails with a (3) custom From address to (4) recipients outside the domain. I was able to get (1) - (3) working. I created a dedicated receive connector for this task and configured it like this: Permissions: ms-Exch-SMTP-Accept-Any-Recipient (for authenticated users) ms-Exch-SMTP-Accept-Authoritative-Domain-Sender (for authenticated users) ms-Exch-SMTP-Accept-Any-Sender (for authenticated users) Authentication: TLS Basic Authentication (without TLS) Exchange Server Authentication However, I'm still struggeling with (4): I can send with "fake" From addresses to recipients inside the domain. Also, I can send with the original From address to recipients outside the domain. Can you tell me what I'm missing, to configure Exchange to send emails with changed From addresses to recipients outside the domain? (Or is this even possible at all?) Thanks. UPDATE I have to correct myself: it seems to be working after all. There must be some issue with the mailbox I used for testing. It turned out it's working with other external mailboxes. However, I still have no idea what was different there... Anyways, you can take this as a documentation on how to configure Exchange in such a way ;)

  Read the article

• Windows 7: Dual Monitor Issue

  - by sdoca

  I have a Dell laptop with a docking station and two external monitors hooked up. I'm running Windows 7 64 bit. Originally, the two monitors were the same - Dell 1908FP. I have replaced one of them with an HP LA2405. I have set the HP 24" (1920 x 1200 connected via DVI port) as montior 1 and extended to use the Dell 19" (12080 x 1024 connected via VGA port) as monitor 2. I have set my power plan so that when the laptop is plugged in, it will turn the monitors off after 10 minutes, but it will not put my laptop to sleep. However, now that I have the HP monitor, when I unlock my laptop and the monitors come back on, all my windows are resized and shifted to the top left corner of the HP monitor as if they had been resized for display on the smaller Dell monitor. A co-worker has the exact same laptop and monitor configuration but doesn't experience this issue, so I figure there's some configuration that's different but we can't find it. I haven't been able to find any mention of a similar problem doing an internet search, but I'm not really sure what terms to use in my search. Anybody have any suggestions as to what may be causing the issue? OS setting? Monitor setting? EDIT: My laptop is using the Intel Graphics and Media Control Panel/drivers.

  Read the article

• Providing access to a no-www website in an active directory environment

  - by oasisbob

  Our website is hosted externally, off our network. The canonical URL is a is intentionally lacking www, and will 301 redirect any requests containing www to the canonical URL. So far, so good. The problem is providing access to the website from within our LAN. In theory, the answer is simple: add a host record in DNS pointing foobarco.org to the external webhost. (eg foobarco.org -- 203.0.113.7) However, Our active directory domain is the same as our public website (foobarco.org), and AD appears to periodically auto-create host (A) records in the domain root corresponding to our domain controllers. This causes obvious problems: users on the LAN attempting to access the website resolve the domain controllers instead. As a stop-gap measure we're overriding DNS using the hosts file on clients, but this is a quick hack that doesn't scale well. The hosts-file hack hasn't broken anything obvious, so I doubt that this behavior is essential to AD operations, but I haven't found a way to disable it. Is it possible to override this behavior?

  Read the article

• Skipping nginx PHP cache for certain areas of a site?

  - by DisgruntledGoat

  I have just set up a new server with nginx (which I am new to) and PHP. On my site there are essentially 3 different types of files: static content like CSS, JS, and some images (most images are on an external CDN) main PHP/MySQL database-driven website which essentially acts like a static site dynamic PHP/MySQL forum It is my understanding from this question and this page that the static files need no special treatment and will be served as fast as possible. I followed the answer from the above question to set up caching for PHP files and now I have a config like this: location ~ \.php$ { try_files $uri =404; fastcgi_cache one; fastcgi_cache_key $scheme$host$request_uri; fastcgi_cache_valid 200 302 304 30m; fastcgi_cache_valid 301 1h; include /etc/nginx/fastcgi_params; fastcgi_pass unix:/var/run/php-fastcgi/php-fastcgi.socket; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /srv/www/example$fastcgi_script_name; fastcgi_param HTTPS off; } However, now I want to prevent caching on the forum (either for everyone or only for logged-in users - haven't checked if the latter is feasible with the forum software). I've heard that "if is evil" inside location blocks, so I am unsure how to proceed. With the if inside the location block I would probably add this in the middle: if ($request_uri ~* "^/forum/") { fastcgi_cache_bypass 1; } # or possible this, if I'm able to cache pages for anonymous visitors if ($request_uri ~* "^/forum/" && $http_cookie ~* "loggedincookie") { fastcgi_cache_bypass 1; } Will that work fine, or is there a better way to achieve this?

  Read the article

• exchange server 2010 with multiple domains

  - by air

  i have one exchange server 2010, which is working fine with one domain. my exchange is working as follows pop3 collector collect emails from one master catchall account and then deliver to exchange server, this working perfect. now what i want to add another domain to same exchange, i have added new domain as trusted domain & email policy and this new domain email account works fine with internal emails. now what i have done, i again forward new email account to same catchall account. but if i send email from any other external email address email is bounce, i can see email receive by pop3 collector but bounce by exchange server. to make you more clear let me explain logic on which i am working. i have 2 domains 1. domain1.com ([email protected]) 2. domain2.com ([email protected] -->[email protected]) now on my machine with exchange server i have pop3 collector which collect all emails from [email protected] and forward to exchange 2010 server. all emails to domain1.com is working perfect but when i send email to [email protected] this email redirect to [email protected] perfectly but when exchanger server receive this email, it bounce. i have also study the url link text and follow the whole process but no success. i also check that my DNS/MX is working fine as the bounce message is going from my exchange server. EDIT the only problem is with accepted domain, as email come to exchange server then bounce back. i just try this today i create one user called test, then i goto his properties -- email there was only one email account [email protected] i try to send email to [email protected] from internet (email bounce) then again i go to test user properties -- email and Add one email [email protected] again u try to send email to t*[email protected]* from internet (email received) i think the only problem is with accepted domain but in hub transport , it shows accepted is there any way to check does domain is properly accepted or not in exchange 2010 server. Thanks

  Read the article

• Windows 7 misses keystrokes from internal keyboard after hibernation (on Acer Aspire 5820)

  - by ron

  I face a very strange symptom on my Acer Aspire laptop (with the factory default Win7 install and divers. Windows update running). After waking the computer from hibernation, it is a pain to type, since on average 5-10 keypresses are missing per 100 presses, using the laptop's keyboard. Steps to reproduce: 1) Power off 2) Power on, wait for system to become usable 3) Open notepad, for 5 times do hit 10x the same character. This gives a similar pattern of 50 chars total: xxxxxxxxxxyyyyyyyyyyaaaaaaaaaassssssssssdddddddddd 4) Optionally repeat. Everything is fine this far. 5) Hibernate. 6) Power on and resume. 7) Repeat steps 3)-4). This time approximately 3-5 character will be missing from each 50 characters. What I ruled out: putting to Sleep or just Locking and resuming from there does not cause problem battery / AC usage does not matter net connection does not matter running processes seem to be the same before and after hibernation key press speed doesn't really matter. For the test I use a nominal 3-5 strokes/second beat. plugging in an external USB keyboard works fine, but the built-in one still misbehaves What could be the problem? How could I diagnose if the keypresses arrive in, but get swallowed at some point? (maybe some nasty keyboard handler hook misbehaves?). Update: It seems that pushing the PowerSmart button and toggling to power saving state fixes the problem. Also, toggling it again back to the original state keeps it fixed. So this may be a fine workaround, but is not a conforming solution.

  Read the article

• securing communication between 2 Linux servers on local network for ports only they need access to

  - by gkdsp

  I have two Linux servers connected to each other via a cross-connect cable, forming a local network. One of the servers presents a DMZ for the other server (e.g. database server) that must be very secure. I'm restricting this question to communication between the two servers for ports that only need to be available to these servers (and no one else). Thus, communication between the two servers can be established by: (1) opening the required port(s) on both servers, and authenticating according to the applications' rules. (2) disabling IP Tables associated with the NIC cards the cross-connect cable is attached to (on both servers). Which method is more secure? In the first case, the needed ports are open to the external world, but protected by user name and password. In the second case, none of the needed ports are open to the outside world, but since the IP Tables are disabled for the NIC cards associated with the cross-connect cables, essentially all of the ports may be considered to be "open" between the two servers (and so if the server creating the DMZ is compromized, the hacker on the DMZ server could view all ports open using the cross-connect cable). Any conventional wisdom how to make the communication secure between two servers for ports only these servers need access to?

  Read the article

• Server specification recommendation

  - by foo

  To cut the story short, I can't buy an item (server/cpu/motherboard/ram) that costs more than USD 330. However, I can combine them, meaning, I can buy a CPU that costs USD 330 and motherboard that costs USD 330. With this limitation, I can't buy a powerful 1U server which will definitely costs me more USD 330. With that in mind, I was hoping to build a powerful desktop PC which will be used as a database server. However, through my experience, desktop PC doesn't last very long, usually the motherboard will just die by itself after 1 or 2 years. So, what would you guys recommend me to buy with this kind of budget? Every item must be <= USD 330. Will be used as a MySQL server. RAID would be nice. 1TB is pretty big for my data. I do not need external graphic card (onboard would do just fine), mouse, keyboard, monitor. Linux friendly. One ethernet port is good enough. It's important that those hardware is made of components that will last long (at least 3 years or something). The server will be placed in an air conditioned room, but a good ventilation for the server is always preferred. I won't overclock it. Intel processor is preferred. Thanks in advance.

  Read the article

• Best format for hard drive for Windows and Mac?

  - by Neil

  I have a 500 GB USB External Hard Drive. I need four partitions on it, for the following purposes: 160 GB for a bootable backup of my Mac. 160 GB for a bootable backup of my Windows. 11 GB for a bootable Snow Leopard Install Disk Rest as for file storage. Now I need a partition table which will get recognised on both Windows and Mac, without needing extra software on Windows, which will let me keep bootable copies of both OS'es, but let me access the file storage from both OS'es. Currently, I have a GUI Partition Table, with Mac OS Extended (Journaled) Partitions for the two backups, Mac OS Extended for the Install Disk, and NTFS for the file storage. While this gets recognised perfectly on my Mac, thanks to an NTFS for Mac driver from Paragon, when connected to Windows, the drive is detected by the machine (listed in Safely Remove USB), but not recognised in Windows Explorer unless I install MacDrive, which is not feasible for me to install on public Windows Machines I might wanna access my storage area on. Can someone recommend the best combination of formats and software/drivers to get this done seamlessly?

  Read the article

• Is my current htaccess setting hurting SEO?

  - by user656002

  I have a site that I have redirecting to https. I do this to leverage wildcard SSL for my password protected pages. Everything seems to work fine with testing. For example, whether you type in http or www, you always get redirected to the SSL https... That said, I have about 200-300 external backlinks -- many high quality, yet google webmaster (along with SEOMoz), shows I have just 4... Huh? I'm embarrassed to say I just discovered this. This has led me to hypothesize that maybe my settings in htaccess is messed up, so google isn't recognizing a link because it's recorded on another site as http, instead of https. Maybe? At any rate, here is my simple htaccess setting for 301 www to http (The https redirect must be done inside the virtual host file--I think). I don't have anything in the htaccess file for https RewriteCond %{HTTP_HOST} ^www\.example\.com$ [NC] RewriteRule ^(.*)$ http://example.com/$1 [L,R=301] Like I said, everything works fine for redirect over https, so I'd rather not screw up what works. On the other hand something is very wrong with google finding all my back links, so I need to fix something... I'm just wondering that maybe google isn't picking up a my backlinks from other websites recording me as http because I'm at https. Maybe google doesn't care and it's some other issue. Am I barking up the right tree? If so any quick fixes? Thanks as always!

  Read the article

• Windows 7 misses keystrokes from internal keyboard after hibernation (on Acer Aspire 5820)

  - by ron

  I face a very strange symptom on my Acer Aspire laptop (with the factory default Win7 install and divers. Windows update running). After waking the computer from hibernation, it is a pain to type, since on average 5-10 keypresses are missing per 100 presses, using the laptop's keyboard. Steps to reproduce: 1) Power off 2) Power on, wait for system to become usable 3) Open notepad, for 5 times do hit 10x the same character. This gives a similar pattern of 50 chars total: xxxxxxxxxxyyyyyyyyyyaaaaaaaaaassssssssssdddddddddd 4) Optionally repeat. Everything is fine this far. 5) Hibernate. 6) Power on and resume. 7) Repeat steps 3)-4). This time approximately 3-5 character will be missing from each 50 characters. What I ruled out: putting to Sleep or just Locking and resuming from there does not cause problem battery / AC usage does not matter net connection does not matter running processes seem to be the same before and after hibernation key press speed doesn't really matter. For the test I use a nominal 3-5 strokes/second beat. plugging in an external USB keyboard works fine, but the built-in one still misbehaves What could be the problem? How could I diagnose if the keypresses arrive in, but get swallowed at some point? (maybe some nasty keyboard handler hook misbehaves?). Update: It seems that pushing the PowerSmart button and toggling to power saving state fixes the problem. Also, toggling it again back to the original state keeps it fixed. So this may be a fine workaround, but is not a conforming solution.

  Read the article

• How to backup Servers to an SSH-Host with low traffic and access to versions and encryption?

  - by leto

  Hello, I've not run backups for the past dont't remember anymore years for my personal stuff until waking up lately and realising contrary to my prior belief: Actually. I care! :) Now I have a central data server at home where I want to attach an external media to, to which I want to save backups of my most important stuff, like years of self-written scripts, database dumps, you name it. I've tinkered with rsync+ssh over the last two years, also tried tar over ssh, but don't know the simplest and most easy to maintain way to do it yet. Heres my workload: A typical LAMP-Server (<5GB Data) which I'd like to backup fully so lots of small files connected via 10Mbit My personal stuff (<750GB Data) from a Mac connected via GE My passwords in an encrypted container (100Mb) from OpenBSD connected via serial-PPP My E-Mail from the last ten years (<25GB) as Maildir which I need to keep in readable format Some archives (tar.*) which I need to backup only once and keep in readable format (Deleted my ideas, as I'm here for suggestions) What I need: 1. Use an ssh-tunnel for data transfer 2. Be quick with lots of small files 3. Keep revisions 4. Be sure the data I save is not corrupted 5. Intelligent resume functions and be able to deal with network congestion :) 6. Compressed and optionally encrypted storage 7. Be able to extract data from backup easily (filesystem like usage would be nice) How would and with what software would you backup this stuff? Hints to tools that can help solve only part of my problem (like encryption) also greatly appreciated. Greets

  Read the article

• How to avoid duplicates when copying files that have been renamed at the destination

  - by Benoitt

  I have to get pictures from a folder – with subfolders which are updated automatically – with their extensions. These files have to be copied in a folder where a website based on PHP will edit them (by renaming and creating an XML file) to be downloadable and integrated in an XML feed. Because of the rename function of the script, when I perform the copy gain, all the files are duplicated, because the script has renamed the original ones already. I've tried a few things with rsync but I'm looking for something more powerful because I can't copy files with an external "history". #!/bin/bash find '/home/name/picture' -name '*.jpg' | while read FILE ; do rsync --backup --backup-dir=incremental --suffix=.old "$FILE" /var/www/media ; done wget --spider 'http://myscript.php' ; #exit 0 PS: As a little addition, I'd like to replace '.' with a 'space' just after the *.jpeg copy. My PHP script has some problem to define files with comma because of the extension. I'm finking about a command with find – like I did before – with a sed function? Is that a good idea?

  Read the article

• Understanding Netbook Partitions & UNR Installation

  - by Wesley

  Hi all, I have a Samsung N120 netbook (with upgraded 2GB RAM). I'm just looking at the Disk Management right now (in Windows XP) and I'm trying to understand what partition holds what. There is "Local Disk (C:)" which is 40GB, "RECOVERY" (no drive letter) which is 6GB and then "TEMP_PART01 (D:)" which is 103.05GB. XP is installed on Local Disk (C:) and I've only used this hard drive for all my files, etc. Recovery is recovery... probably not removable anyways. Now, what bugs me is the TEMP_PART01 (D:) partition, which contains quite a bit of random junk, such as EULA text documents, an "external installer", UI Wrapper Resource DLLs, a "VC_RED" Windows Installer Package and a few more files. I have no clue what any of it means, but I'm assuming that this was probably stuff that could have been on the Local Disk (C:), along with the WINDOWS, Program Files, and Docs and Settings folder. So, how should I go about this? Should I have kept all my data on D: and left all OS related files/folders on C:? Now, I want to install Ubuntu Netbook Remix. Question is, will this install within Windows, if I want to dual boot it? If not, would I partition D: into two small chunks, one on which I would install UNR? There are basically two questions in here, but it'd be great to get answers for both! Thanks in advance.

  Read the article

• Troubleshoot port forwarding. Could it be ISP blocking incoming connections?

  - by Gravy

  Had a new Axis IP camera delivered yesterday. Plugged into Cisco E2400 Wireless Router but having problems. Example topology: WAN IP: 10.10.10.10 (example) Cisco Router: 192.168.1.1 Axis Camera: 192.168.1.10:80 Port forwarding rules set up on router External Port: 999 Internal Port: 80 Protocol: TCP & UDP Device IP: 192.168.1.10:80 Enabled: True Trying to connect from within the lan to 192.168.1.1:80 from within browser - Works properly. Trying to connect from within the lan to 10:10:10:10:999 from within browser - Works properly. Trying to connect from outside the LAN (e.g. via 3g or another isp) to 10:10:10:10:999 from within browser - Doesnt work. I get the following errors from different machines / browsers: Safari could not open the page because the server stopped responding (IOS) The server at xx.xx.xx.xx is taking too long to respond. (firefox) This problem is not just for the Axis camera. I am also having similar problems connecting to my NAS drive. After using a web based port scanning tool, it appears as though port 999 is closed. Not certain why when I have set up port forwarding within the router. Any troubleshooting suggestions to help me determine whether the problem is with my Cisco settings / firewall or whether it could be my ISP blocking incoming connection requests? Many thanks

  Read the article

• Am I obliged to use ipv6 tunnel services if I want to be able to use it?

  - by Zagorax

  I was looking for configuring Slackware to use ipv6 but all instruction I found speak about using an ipv6 tunnel that encapsulate ipv6 request into ipv4 packet and send them to an external router that extracts ipv6 request and sends a reply (or, at least, this is what I understood). Is that necessary? Isn't there a way to configure a pure ipv6 system? If yes, could you please point me to a guide that clearly explain how to enable ipv6 without this trick? I would like to configure my Slackware desktop at first, and then do the same with my Centos server. EDIT: maybe I gave you too few information. Sorry. I'll write some more information thanks to the posted guide. ~$ test -f /proc/net/if_inet6 && echo "Running kernel is IPv6 ready" Running kernel is IPv6 ready So, it seems ipv6 is enabled in my kernel. Some other output from ifconfig, route and /etc/resolv.conf content (with opendns): ~$ /sbin/ifconfig wlan0 | grep inet6 inet6 addr: fe80::21f:3bff:fe60:cc5b/64 Scope:Link ~$ /sbin/route -A inet6 | grep wlan0 fe80::/64 :: U 256 0 0 wlan0 ff00::/8 :: U 256 0 0 wlan0 ~$ cat /etc/resolv.conf inet6 nameserver 2620:0:ccc::2 nameserver 208.67.222.222 nameserver 208.67.220.220 But still, with ping6 I can only ping localhost (::1). Everything else is unreachable. Normal ping works fine. That is why I was asking if I am obliged to use a tunnel.

  Read the article

• How do I find and kill a php loop (process)?

  - by Hoytman

  I have a php script that I have been developing which calls an external api within a loop. It is being tested on a VPS which is running LAMP on Debian. I noticed this morning that the api was not responding to my script. When I called the provider, they told me that my server had been calling the api 1000's of times per hour for the past 10 hours. I am assuming that a php script (which I have been working on the day before and testing on my VPS) entered into an infinite loop during one of the executions, and never came out (I have been testing it from the command prompt, and not over the web.) I have attempted to stop and start Apache, but the api support staff says that the calls are still coming in from my server address. How can I find and stop the process? Also, is there a possibility that the Apache stop/start solved the problem, but the api is still trying to sort through past calls? Please forgive me for not using my local test environment correctly. Edit: I do not know the process name, I need to discover the name (or pid) based on behavior.

  Read the article

• Reverse NAT Setup for Hyper-V on Win 2008 R2

  - by sukru

  I'm trying to setup a Linux server behind a Windows Hyper-V host that will help supply some of the services (SSH, HTTPS, etc). However getting RRAS configured for reverse NAT (port forwarding) turned out to be a non trivial task. As a staring point, I tried forwarding port 22 (SSH) to the virtual machine. The virtual machine is on a public interface (i.e.: it also has a visible IP on the same network as the host). On RRAS management console I tried to add a rule, by adding "Local Area Connection" to NAT pool (Public Interface - Enable Nat), and an incoming rule for port 22 - :22. I also tried with the same port enabled on Windows Firewall (and not). The NAT management page tells there are "1 mappings" and "30+ Outbound packets transleted". However all other counters (Inbound packets translated, and respective rejected ones) are always zero. (I'm trying to access the server from an external machine). I can directly access the service if I give the VM's public IP, but not the host's one. Is there a way to enable this on RRAS?

  Read the article

• Will Windows repair my multi-boot when I format the 1st physical partition with boot sector?

  - by user2353806

  Due to historical reasons I got a laptop with Vista, Windows 7 and Windows Server 2008R2 partitions. (boot from external wasn´t that viable) Nothing (Windows Repair, bootrec /whateveroption) worked when I restored only the Windows 7 and WS2k8 with Acronis TrueImage. Don´t ask me through what idiotic error messages I went during repair tries. (Wrong Windows version,...) So I grudgingly restored all three - with the little additional excursion that I thought changing the active partition to the Windows 7 partition would move the boot sector and let me format the Vista part... Oh no. Seems too logical for MS. (Dunno what I changed, but today it will let me format!) So the real question is: Will formatting the Vista part trash things again beyond comprehension or will Windows Repair bring back the boot rec and remove Vista from the boot options? Or should I just erase all the files to avoid trashing the boot? Where will the boot rec be (after repair) when I format the Vista? On 1st or 2nd partition? And if I get drunk and install Windows 8.1 on the 1st, will anything work? ;-) Thanks

  Read the article

• How can I recover my data from a damaged hard drive?

  - by krk

  a few days ago when I was working on windows my laptop was beaten on the side where the hard drive is located. As a result, it was damaged and I couldn't access the windows partition. I had to boot the linux one, which is working without any trouble. I have 2 partition formatted with ntfs, the one with windows on it, and the other one intended to store data. I mounted the windows partition from ubuntu and I could see all my files. But when I tried to mount the data partition it was impossible. It threw me an error, it couldn't recognize ntfs partition. I try to copy the damaged disk into an external hard drive using the command: dd if=/dev/sda of=/dev/sdb conv=noerror,sync The progress stopped at 60%. I was still unable to mount the data partition. Now I'm trying to backup my files using an utility called Photorec. The problem is that it is recovering my files in a disorderly way, it is all mixed up and I need my original directory structure, it will become an endless task to organize the files as they were before. Is there any way I can get my partition back?

  Read the article

• IPtables and Remote Desktop with Proxy

  - by Sebastian

  So I setup a windows 2008 web server R2 on VirtualBox. Currently using Bridged Network. I can remote desktop to the machine hosting the VM (10.0.0.183) but cannot remote desktop to the VM itself (10.0.0.195). The remote port on the VM set to 5003. VM setup to accept remote connections (windows side). We also use a proxy for our internet, and I added these rules under NAT. (centOS 5) on our proxy box. -A INPUT -p tcp --dport 3389 -j ACCEPT -A REROUTING -i ppp0 -p tcp --dport 3389 -j REDIRECT --to-port 5003 -A FORWARD -d 10.0.0.195 --dport 5003 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT I've been trying for hours and hours and just cannot get it to work. I also used freedns so that we can use a domain name to connect too this VM over the internet. (the DNS points to our external IP address). If we don't get this right we will have to purchase a PPoE from an ISP to connect to this VM remotely, but I know that there is an alternative route if I can just get this port forwarding right!

  Read the article

< Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >