power saving - Page 333

T60 Screen/LCD gets black after some minutes with a highpitched sound rising and fading

- by edelwater

Just now my T60 screen got "black" (so no display). On my second monitor: no problems so the VGA output works. Symptom: Screen blanks / no display, but it works on the second monitor Steps to reproduce: - boot - wait (it does not matter what you do you do not have to login or anything) - (now the monitor of the laptop slowly begins to make a ssssssssHHHHHHHHHHHHHHHHHWOEOEssssssss noise of about 10 seconds) - right after the sounds ends, the monitor gets black. Sometimes it seems to be the same each time. Software: Installed no new software before/after, running ZoneAlarm and antivirus. Other: It does not feel hot in any place, there don't seem to be running processes with strange behaviour. Warranty: Out of warranty What was I doing: Typing text on a website and doing some PHP coding in a text editor. What can I do here other than buy a new laptop? Does it sound familiar to known cases? Update 1: Exactly the same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-Screen-Blackout/m-p/288772 and the second poster (garyj), http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/Black-Screen-on-T60/m-p/235053#M48627 And here: "I have that same problem. I replaced the CCRL on mine and it works fine when the screen is not screwed in. Once the frame of the LCD screen (metal portion) touches the metal on the laptop which holds the screen the screen goes black. If the metal is touching the screen when you boot up it boots up with it being very dimmly lit. " from http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-screen-problems/m-p/205047#M44995 (it seems replacing the LCD display is no use, he tried it three times). Same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-black-screen/m-p/80604#M25914 Hmmm... not handy 3 or 4 months ago I ordered and installed a new fan. Now the LCD. Which does not seem the core issue but some electric issue so it seems replacing the LCD is not the thing to do here. If it is not the LCD that needs to be replaced (see other threads), which parts can I order to fix this? Is there any information which could lead me to identify the issue? I have read replacing the "inverter" AND the "backlightning" would that make sense? Update 2: I replaced the inverter with another inverter, but IO have the same problem. I DID notice that the inverter is the component that makes the sssssssssssssHHHHHHHHHH sound AND it becomes very hot in a few seconds. (So both the old and the test one) The problem is hmmm wat is then the thing that makes the inverter hot by (assumption) after which it shuts itself down. Is it either the input or the output? The output seems to me not, because the screen seems to function so it must be the electricity coming in. But what causes it to become so hot would it be the VGA card outputting some unusual high voltage seems unlikely? I am looking for the component to order / replace update 3: Great news. Ewendish gave me the hint to look in the BIOS. While I was in the BIOS I noticed that the screen did not switch off and there was not a high pitched sound. So I lowered some settings in the BIOS. I then noticed that with brightness turned to 0 (via FN End), it does not make a high pitched sound and does not turn off, with brightness turned up just three "stripes" it starts making the sound. So I could from now on work under lowest brightness modus or... see where the problem lies. So as stated below with either power management or display drivers / ATI Catalyst settings / Windows display settings. I'm trying to see where it lies, but I will google some first. Update 4: I wiped clean the Windows XP installation and installed Windows 7 on it. Unfortunately the problem remains: as soon as the brightness goes up the screen starts hissing. This means... back to original thought: it probably IS a hardware problem. Although ... again... if it is NOT the inverter, what is it? Could it be the backlightning component? I could try to switch that with a another T60... but this is quite tricky.

Read the article

Android Video Camera : still picture

- by Alex

I use the camera intent to capture video. Here is the problem: If I use this line of code, I can record video. But onActivityResult doesn't work. Intent intent = new Intent("android.media.action.VIDEO_CAMERA"); If I use this line of code, after press the recording button, the camera is freezed, I mean, the picture is still. Intent intent = new Intent(MediaStore.ACTION_VIDEO_CAPTURE); BTW, when I use $Intent intent = new Intent(MediaStore.ACTION_IMAGE_CAPTURE); to capture a picture, it works fine. The java file is as follows: package com.camera.picture; import java.io.File; import java.text.SimpleDateFormat; import java.util.Date; import android.app.Activity; import android.content.ContentValues; import android.content.Intent; import android.net.Uri; import android.os.Bundle; import android.os.Environment; import android.provider.MediaStore; import android.util.Log; import android.view.View; import android.widget.Button; import android.widget.ImageView; import android.widget.Toast; import android.widget.VideoView; public class PictureCameraActivity extends Activity { private static final int IMAGE_CAPTURE = 0; private static final int VIDEO_CAPTURE = 1; private Button startBtn; private Button videoBtn; private Uri imageUri; private Uri videoUri; private ImageView imageView; private VideoView videoView; /** Called when the activity is first created. * sets the content and gets the references to * the basic widgets on the screen like * {@code Button} or {@link ImageView} */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); imageView = (ImageView)findViewById(R.id.img); videoView = (VideoView)findViewById(R.id.videoView); startBtn = (Button) findViewById(R.id.startBtn); startBtn.setOnClickListener(new View.OnClickListener() { public void onClick(View v) { startCamera(); } }); videoBtn = (Button) findViewById(R.id.videoBtn); videoBtn.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View v) { // TODO Auto-generated method stub startVideoCamera(); } }); } public void startCamera() { Log.d("ANDRO_CAMERA", "Starting camera on the phone..."); String fileName = "testphoto.jpg"; ContentValues values = new ContentValues(); values.put(MediaStore.Images.Media.TITLE, fileName); values.put(MediaStore.Images.Media.DESCRIPTION, "Image capture by camera"); values.put(MediaStore.Images.Media.MIME_TYPE, "image/jpeg"); imageUri = getContentResolver().insert( MediaStore.Images.Media.EXTERNAL_CONTENT_URI, values); Intent intent = new Intent(MediaStore.ACTION_IMAGE_CAPTURE); intent.putExtra(MediaStore.EXTRA_OUTPUT, imageUri); intent.putExtra(MediaStore.EXTRA_VIDEO_QUALITY, 1); startActivityForResult(intent, IMAGE_CAPTURE); } protected void onActivityResult(int requestCode, int resultCode, Intent data) { if (requestCode == IMAGE_CAPTURE) { if (resultCode == RESULT_OK){ Log.d("ANDROID_CAMERA","Picture taken!!!"); imageView.setImageURI(imageUri); } } if (requestCode == VIDEO_CAPTURE) { if (resultCode == RESULT_OK) { Log.d("ANDROID_CAMERA","Video taken!!!"); Toast.makeText(this, "Video saved to:\n" + data.getData(), Toast.LENGTH_LONG).show(); videoView.setVideoURI(videoUri); } } } private void startVideoCamera() { // TODO Auto-generated method stub //create new Intent Log.d("ANDRO_CAMERA", "Starting camera on the phone..."); String fileName = "testvideo.mp4"; ContentValues values = new ContentValues(); values.put(MediaStore.Video.Media.TITLE, fileName); values.put(MediaStore.Video.Media.DESCRIPTION, "Video captured by camera"); values.put(MediaStore.Video.Media.MIME_TYPE, "video/mp4"); videoUri = getContentResolver().insert( MediaStore.Video.Media.EXTERNAL_CONTENT_URI, values); Intent intent = new Intent("android.media.action.VIDEO_CAMERA"); //Intent intent = new Intent(MediaStore.ACTION_VIDEO_CAPTURE); intent.putExtra(MediaStore.EXTRA_OUTPUT, videoUri); intent.putExtra(MediaStore.EXTRA_VIDEO_QUALITY, 1); // start the Video Capture Intent startActivityForResult(intent, VIDEO_CAPTURE); } private static File getOutputMediaFile() { // TODO Auto-generated method stub // To be safe, you should check that the SDCard is mounted // using Environment.getExternalStorageState() before doing this. File mediaStorageDir = new File(Environment.getExternalStoragePublicDirectory( Environment.DIRECTORY_PICTURES), "MyCameraApp"); // This location works best if you want the created images to be shared // between applications and persist after your app has been uninstalled. // Create the storage directory if it does not exist if (! mediaStorageDir.exists()){ if (! mediaStorageDir.mkdirs()){ Log.d("MyCameraApp", "failed to create directory"); return null; } } // Create a media file name String timeStamp = new SimpleDateFormat("yyyyMMdd_HHmmss").format(new Date()); File mediaFile; mediaFile = new File(mediaStorageDir.getPath() + File.separator + "VID_"+ timeStamp + ".mp4"); return mediaFile; } /** Create a file Uri for saving an image or video */ private static Uri getOutputMediaFileUri(){ return Uri.fromFile(getOutputMediaFile()); } }

Read the article

Many-to-one relation exception due to closed session after loading

- by Nick Thissen

Hi, I am using NHibernate (version 1.2.1) for the first time so I wrote a simple test application (an ASP.NET project) that uses it. In my database I have two tables: Persons and Categories. Each person gets one category, seems easy enough. | Persons | | Categories | |--------------| |--------------| | Id (PK) | | Id (PK) | | Firstname | | CategoryName | | Lastname | | CreatedTime | | CategoryId | | UpdatedTime | | CreatedTime | | Deleted | | UpdatedTime | | Deleted | The Id, CreatedTime, UpdatedTime and Deleted attributes are a convention I use in all my tables, so I have tried to bring this fact into an additional abstraction layer. I have a project DatabaseFramework which has three important classes: Entity: an abstract class that defines these four properties. All 'entity objects' (in this case Person and Category) must inherit Entity. IEntityManager: a generic interface (type parameter as Entity) that defines methods like Load, Insert, Update, etc. NHibernateEntityManager: an implementation of this interface using NHibernate to do the loading, saving, etc. Now, the Person and Category classes are straightforward, they just define the attributes of the tables of course (keeping in mind that four of them are in the base Entity class). Since the Persons table is related to the Categories table via the CategoryId attribute, the Person class has a Category property that holds the related category. However, in my webpage, I will also need the name of this category (CategoryName), for databinding purposes for example. So I created an additional property CategoryName that returns the CategoryName property of the current Category property, or an empty string if the Category is null: Namespace Database Public Class Person Inherits DatabaseFramework.Entity Public Overridable Property Firstname As String Public Overridable Property Lastname As String Public Overridable Property Category As Category Public Overridable ReadOnly Property CategoryName As String Get Return If(Me.Category Is Nothing, _ String.Empty, _ Me.Category.CategoryName) End Get End Property End Class End Namespace I am mapping the Person class using this mapping file. The many-to-one relation was suggested by Yads in another thread: <id name="Id" column="Id" type="int" unsaved-value="0"> <generator class="identity" /> </id> <property name="CreatedTime" type="DateTime" not-null="true" /> <property name="UpdatedTime" type="DateTime" not-null="true" /> <property name="Deleted" type="Boolean" not-null="true" /> <property name="Firstname" type="String" /> <property name="Lastname" type="String" /> <many-to-one name="Category" column="CategoryId" class="NHibernateWebTest.Database.Category, NHibernateWebTest" /> (I can't get it to show the root node, this forum hides it, I don't know how to escape the html-like tags...) The final important detail is the Load method of the NHibernateEntityManager implementation. (This is in C# as it's in a different project, sorry about that). I simply open a new ISession (ISessionFactory.OpenSession) in the GetSession method and then use that to fill an EntityCollection(Of TEntity) which is just a collection inheriting System.Collections.ObjectModel.Collection(Of T). public virtual EntityCollection< TEntity Load() { using (ISession session = this.GetSession()) { var entities = session .CreateCriteria(typeof (TEntity)) .Add(Expression.Eq("Deleted", false)) .List< TEntity (); return new EntityCollection< TEntity (entities); } } (Again, I can't get it to format the code correctly, it hides the generic type parameters, probably because it reads the angled symbols as a HTML tag..? If you know how to let me do that, let me know!) Now, the idea of this Load method is that I get a fully functional collection of Persons, all their properties set to the correct values (including the Category property, and thus, the CategoryName property should return the correct name). However, it seems that is not the case. When I try to data-bind the result of this Load method to a GridView in ASP.NET, it tells me this: Property accessor 'CategoryName' on object 'NHibernateWebTest.Database.Person' threw the following exception:'Could not initialize proxy - the owning Session was closed.' The exception occurs on the DataBind method call here: public virtual void LoadGrid() { if (this.Grid == null) return; this.Grid.DataSource = this.Manager.Load(); this.Grid.DataBind(); } Well, of course the session is closed, I closed it via the using block. Isn't that the correct approach, should I keep the session open? And for how long? Can I close it after the DataBind method has been run? In each case, I'd really like my Load method to just return a functional collection of items. It seems to me that it is now only getting the Category when it is required (eg, when the GridView wants to read the CategoryName, which wants to read the Category property), but at that time the session is closed. Is that reasoning correct? How do I stop this behavior? Or shouldn't I? And what should I do otherwise? Thanks!

Read the article

Failing rspec Rails Tutorial Chapter 9.3

- by greyghost24

I am failing 3 tests and I have found numerous examples on here and on on the internet in general but I can't seem to find where I'm going wrong. Thanks for any help. 1) User pages signup with valid information edit page Failure/Error: before { visit edit_user_path(user) } ActionView::Template::Error: undefined method `model_name' for NilClass:Class # ./app/views/users/edit.html.erb:6:in `_app_views_users_edit_html_erb___4113112884365867193_70232486166220' # ./spec/requests/user_pages_spec.rb:96:in `block (5 levels) in <top (required)>' 2) User pages signup with valid information edit page Failure/Error: before { visit edit_user_path(user) } ActionView::Template::Error: undefined method `model_name' for NilClass:Class # ./app/views/users/edit.html.erb:6:in `_app_views_users_edit_html_erb___4113112884365867193_70232486166220' # ./spec/requests/user_pages_spec.rb:96:in `block (5 levels) in <top (required)>' 3) User pages signup with valid information edit page Failure/Error: before { visit edit_user_path(user) } ActionView::Template::Error: undefined method `model_name' for NilClass:Class # ./app/views/users/edit.html.erb:6:in `_app_views_users_edit_html_erb___4113112884365867193_70232486166220' # ./spec/requests/user_pages_spec.rb:96:in `block (5 levels) in <top (required)>' Finished in 0.26515 seconds 3 examples, 3 failures Failed examples: rspec ./spec/requests/user_pages_spec.rb:100 # User pages signup with valid information edit page rspec ./spec/requests/user_pages_spec.rb:99 # User pages signup with valid information edit page rspec ./spec/requests/user_pages_spec.rb:101 # User pages signup with valid information edit page authentication_pages_spec.rb require 'spec_helper' describe "Authentication" do subject { page } describe "signin page" do before { visit signin_path } it { should have_selector('h1', text: 'Sign in') } it { should have_selector('title', text: 'Sign in') } end describe "signin" do before { visit signin_path } describe "with invalid information" do before { click_button "Sign in" } it { should have_selector('title', text: 'Sign in') } it { should have_selector('div.alert.alert-error', text: 'Invalid') } describe "after visiting another page" do before { click_link "Home" } it { should_not have_selector('div.alert.alert-error') } end end describe "with valid information" do let(:user) { FactoryGirl.create(:user) } before do fill_in "Email", with: user.email fill_in "Password", with: user.password click_button "Sign in" end it { should have_selector('title', text: user.name) } it { should have_link('Profile', href: user_path(user)) } it { should have_link('Sign out', href: signout_path) } it { should_not have_link('Sign in', href: signin_path) } describe "followed by signout" do before { click_link "Sign out" } it { should have_link('Sign in') } end end end end Here is the users_controller: class UsersController < ApplicationController def show @user = User.find(params[:id]) end def new @user = User.new end def create @user = User.new(params[:user]) if @user.save sign_in @user flash[:success] = "Welcome to the Sample App!" redirect_to @user else render 'new' end end end def edit @user = User.find(params[:id]) end edit.html.erb: <% provide(:title, "Edit user") %> <h1>Update your profile</h1> <div class="row"> <div class="span6 offset3"> <%= form_for(@user) do |f| %> <%= render 'shared/error_messages' %> <%= f.label :name %> <%= f.text_field :name %> <%= f.label :email %> <%= f.text_field :email %> <%= f.label :password %> <%= f.password_field :password %> <%= f.label :password_confirmation, "Confirm Password" %> <%= f.password_field :password_confirmation %> <%= f.submit "Save changes", class: "btn btn-large btn-primary" %> <% end %> <%= gravatar_for @user %> <a href="http://gravatar.com/emails">change</a> </div> here is the user_pages_spec: require 'spec_helper' describe "User pages" do subject { page } describe "profile page" do let(:user) { FactoryGirl.create(:user) } before { visit user_path(user) } it { should have_selector('h1', text: user.name) } it { should have_selector('title', text: user.name) } end describe "signup page" do before { visit signup_path } it { should have_selector('h1', text: 'Sign up') } it { should have_selector('title', text: full_title('Sign up')) } end describe "signup" do before { visit signup_path } describe "with invalid information" do it "should not create a user" do expect { click_button "Create my account" }.not_to change(User, :count) end describe "error messages" do before { click_button "Create my account" } it { should have_selector('title', text: 'Sign up') } it { should have_content('error') } end end describe "with valid information" do before do fill_in "Name", with: "Example User" fill_in "Email", with: "[email protected]" fill_in "Password", with: "foobar" fill_in "Confirmation", with: "foobar" end it "should create a user" do expect do click_button "Create my account" end.to change(User, :count).by(1) end describe "after saving the user" do before { click_button "Create my account" } let(:user) { User.find_by_email('[email protected]') } it { should have_selector('title', text: user.name) } it { should have_selector('div.alert.alert-success', text: 'Welcome') } it { should have_link('Sign out') } end end end describe "signup page" do before { visit signup_path } it { should have_selector('h1', text: 'Sign up') } it { should have_selector('title', text: full_title('Sign up')) } end describe "signup" do before { visit signup_path } let(:submit) { "Create my account" } describe "with invalid information" do it "should not create a user" do expect { click_button submit }.not_to change(User, :count) end end describe "with valid information" do before do fill_in "Name", with: "Example User" fill_in "Email", with: "[email protected]" fill_in "Password", with: "foobar" fill_in "Confirmation", with: "foobar" end it "should create a user" do expect { click_button submit }.to change(User, :count).by(1) end describe "edit" do let(:user) { FactoryGirl.create(:user) } before { visit edit_user_path(user) } describe "page" do it { should have_selector('h1', text: "Update your profile") } it { should have_selector('title', text: "Edit user") } it { should have_link('change', href: 'http://gravatar.com/emails') } end describe "with invalid information" do before { click_button "Save changes" } it { should have_content('error') } end end end end end edit: users_controllers.rb was formatted incorrectly. It should look like this: class UsersController < ApplicationController def show @user = User.find(params[:id]) end def new @user = User.new end def create @user = User.new(params[:user]) if @user.save sign_in @user flash[:success] = "Welcome to the Sample App!" redirect_to @user else render 'new' end end def edit @user = User.find(params[:id]) end end

Read the article

Pass a variable from javascript to php in the same session OnClickFunction

- by MickyScion

I was seeing through stackoverflow the solutions for this kind of problems but any of them are executing the code of javascript in the same session...please i want some help with this...i have this in my session <script> function show_alert() { var ProdAntes = document.getElementById("productoseleccionado").value; var CantAntes = document.getElementById("cantidadantes").value; var PrecAntes = document.getElementById("precioantes").value; var FecAntes = document.getElementById("fechaantes").value; var ProdAhora = document.getElementById("SoyaProductorProduccionProducto").value; var CantAhora = document.getElementById("SoyaProductorProduccionCantidadtm").value; var PrecAhora = document.getElementById("SoyaProductorProduccionPreciodolar").value; var FecAhora = document.getElementById("select_date").value; } </script> and in my html stuff i have this <?php echo $this->Form->create('SoyaProductorProduccion');?> <fieldset> <?php echo $this->Form->hidden('id', array('value' => $this->data['SoyaProductorProduccion']['id'])); echo $this->Form->input('operacion', array('type' => 'hidden', 'value'=>'Produccion')); //-------------------------------------------------------------- $productoseleccionado = $this->data['SoyaProductorProduccion']['producto']; echo $this->Form->input('productoseleccionado', array('type' => 'hidden','style'=>'width:500px; height:30px;','id' => 'productoseleccionado' , 'value' => $productoseleccionado)); echo $this->Form->input('producto', array( 'options' => array( $productoseleccionado => $productoseleccionado, 'Torta solvente de soya' => 'Torta solvente de soya', 'Torta solvente de girasol' => 'Torta solvente de girasol', 'Harina integral de soya' => 'Harina integral de soya', 'Harina de girasol' => 'Harina de girasol', 'Cascarilla de soya' => 'Cascarilla de soya', 'Cascarilla de girasol' => 'Cascarilla de girasol', 'Aceite de soya refinado' => 'Aceite de soya refinado', 'Aceite de soya crudo' => 'Aceite de soya crudo', 'Aceite de girasol refinado' => 'Aceite de girasol refinado', 'Aceite de girasol crudo' => 'Aceite de girasol crudo', ),'label'=>'Tipo de Producto' )); foreach ($soyacambiodolares as $soyacambiodolar): $dolar=$soyacambiodolar['SoyaCambioDolar']['cambio']; endforeach; echo $this->Form->input('cambio', array('type' => 'hidden','value' => $dolar)); //----------------------------------------------------------------------------- $cantidadantes = $this->data['SoyaProductorProduccion']['cantidadtm']; echo $this->Form->input('cantidadantes', array('type' => 'hidden','style'=>'width:500px; height:30px;', 'value' => $cantidadantes,'id' => 'cantidadantes')); echo $this->Form->input('cantidadtm', array('label' => 'Cantidad en tonelada(s) métrica(s) del producto (TM)','style'=>'width:500px; height:30px;')); //----------------------------------------------------------------------------- $precioantes = $this->data['SoyaProductorProduccion']['preciodolar']; echo $this->Form->input('precioantes', array('type' => 'hidden','style'=>'width:500px; height:30px;', 'value' => $precioantes,'id' => 'precioantes')); echo $this->Form->input('preciodolar', array('label' => 'Precio en Dolares Americanos por tonelada métrica (TM / $us)','style'=>'width:500px; height:30px;')); //----------------------------------------------------------------------------- ?> <table style="width: 600px"> <tr> <td > <?php //---------------------------------------------------------------- $fechaantes = $this->data['SoyaProductorProduccion']['fecharegistro']; echo $this->Form->input('fechaantes', array('type' => 'hidden','style'=>'width:500px; height:30px;', 'value' => $fechaantes, 'id' => 'fechaantes')); //---------------------------------------------------------------- echo $this->Form->input("fecharegistro", array( 'label' => '<strong>Periodo al que corresponde la declaración</strong>', 'type' => 'text', 'style' => 'width: 110px', 'class' => 'fl tal vat w300p', 'error' => false , 'id' => 'select_date')); ?> <?php echo $this->Html->div('datepicker_img w100p fl pl460p pa', $this->Html->image('datepicker_calendar_icon.gif'),array('id' => 'datepicker_img')); ?> <?php echo $this->Html->div('datepicker fl pl460p pa', ' ' ,array('id' => 'datepicker')); ?> </td> </tr> </table> <?php echo $this->Form->submit('Modificar Existencia', array('class' => 'form-submit', 'title' => 'Presione aqui para agregar datos', 'onclick' => 'return show_alert();')); ?> </fieldset> <?php echo $this->Form->end(); ?> my function is ok but i want these: when i click the submit button i want to compare wich field had been changed, and i want to create a chain of detailed changes like "change in the field 1, change in the fiel 2.--" and so on...and this has to be saved in my database so i have to pass to a variable in my php before saving...thanks!

Read the article

Upgrading from TFS 2010 RC to TFS 2010 RTM done

- by Martin Hinshelwood

Today is the big day, with the Launch of Visual Studio 2010 already done in Asia, and rolling around the world towards us, we are getting ready for the RTM (Released). We have had TFS 2010 in Production for nearly 6 months and have had only minimal problems. Update 12th April 2010 – Added Scott Hanselman’s tweet about the MSDN download release time. SSW was the first company in the world outside of Microsoft to deploy Visual Studio 2010 Team Foundation Server to production, not once, but twice. I am hoping to make it 3 in a row, but with all the hype around the new version, and with it being a production release and not just a go-live, I think there will be a lot of competition. Developers: MSDN will be updated with #vs2010 downloads and details at 10am PST *today*! @shanselman - Scott Hanselman Same as before, we need to Uninstall 2010 RC and install 2010 RTM. The installer will take care of all the complexity of actually upgrading any schema changes. If you are upgrading from TFS 2008 to TFS2010 you can follow our Rules To Better TFS 2010 Migration and read my post on our successes. We run TFS 2010 in a Hyper-V virtual environment, so we have the advantage of running a snapshot as well as taking a DB backup. Done - Snapshot the hyper-v server Microsoft does not support taking a snapshot of a running server, for very good reason, and Brian Harry wrote a post after my last upgrade with the reason why you should never snapshot a running server. Done - Uninstall Visual Studio Team Explorer 2010 RC You will need to uninstall all of the Visual Studio 2010 RC client bits that you have on the server. Done - Uninstall TFS 2010 RC Done - Install TFS 2010 RTM Done - Configure TFS 2010 RTM Pick the Upgrade option and point it at your existing “tfs_Configuration” database to load all of the existing settings Done - Upgrade the SharePoint Extensions Upgrade Build Servers (Pending) Test the server The back out plan, and you should always have one, is to restore the snapshot. Upgrading to Team Foundation Server 2010 – Done The first thing you need to do is off the TFS server and then log into the Hyper-v server and create a snapshot. Figure: Make sure you turn the server off and delete all old snapshots before you take a new one I noticed that the snapshot that was taken before the Beta 2 to RC upgrade was still there. You should really delete old snapshots before you create a new one, but in this case the SysAdmin (who is currently tucked up in bed) asked me not to. I guess he is worried about a developer messing up his server Turn your server on and wait for it to boot in anticipation of all the nice shiny RTM’ness that is coming next. The upgrade procedure for TFS2010 is to uninstal the old version and install the new one. Figure: Remove Visual Studio 2010 Team Foundation Server RC from the system. Figure: Most of the heavy lifting is done by the Uninstaller, but make sure you have removed any of the client bits first. Specifically Visual Studio 2010 or Team Explorer 2010. Once the uninstall is complete, this took around 5 minutes for me, you can begin the install of the RTM. Running the 64 bit OS will allow the application to use more than 2GB RAM, which while not common may be of use in heavy load situations. Figure: It is always recommended to install the 64bit version of a server application where possible. I do not think it is likely, with SharePoint 2010 and Exchange 2010 and even Windows Server 2008 R2 being 64 bit only, I do not think there will be another release of a server app that is 32bit. You then need to choose what it is you want to install. This depends on how you are running TFS and on how many servers. In our case we run TFS and the Team Foundation Build Service (controller only) on out TFS server along with Analysis services and Reporting Services. But our SharePoint server lives elsewhere. Figure: This always confuses people, but in reality it makes sense. Don’t install what you do not need. Every extra you install has an impact of performance. If you are integrating with SharePoint you will need to run this install on every Front end server in your farm and don’t forget to upgrade your Build servers and proxy servers later. Figure: Selecting only Team Foundation Server (TFS) and Team Foundation Build Services (TFBS) It is worth noting that if you have a lot of builds kicking off, and hence a lot of get operations against your TFS server, you can use a proxy server to cache the source control on another server in between your TFS server and your build servers. Figure: Installing Microsoft .NET Framework 4 takes the most time. Figure: Now run Windows Update, and SSW Diagnostic to make sure all your bits and bobs are up to date. Note: SSW Diagnostic will check your Power Tools, Add-on’s, Check in Policies and other bits as well. Configure Team Foundation Server 2010 – Done Now you can configure the server. If you have no key you will need to pick “Install a Trial Licence”, but it is only £500, or free with a MSDN subscription. Anyway, if you pick Trial you get 90 days to get your key. Figure: You can pick trial and add your key later using the TFS Server Admin. Here is where the real choices happen. We are doing an Upgrade from a previous version, so I will pick Upgrade the same as all you folks that are using the RC or TFS 2008. Figure: The upgrade wizard takes your existing 2010 or 2008 databases and upgraded them to the release. Once you have entered your database server name you can click “List available databases” and it will show what it can upgrade. Figure: Select your database from the list and at this point, make sure you have a valid backup. At this point you have not made ANY changes to the databases. At this point the configuration wizard will load configuration from your existing database if you have one. If you are upgrading TFS 2008 refer to Rules To Better TFS 2010 Migration. Mostly during the wizard the default values will suffice, but depending on the configuration you want you can pick different options. Figure: Set the application tier account and Authentication method to use. We use NTLM to keep things simple as we host our TFS server externally for our remote developers. Figure: Setting your TFS server URL’s to be the remote URL’s allows the reports to be accessed without using VPN. Very handy for those remote developers. Figure: Detected the existing Warehouse no problem. Figure: Again we love green ticks. It gives us a warm fuzzy feeling. Figure: The username for connecting to Reporting services should be a domain account (if you are on a domain that is). Figure: Setup the SharePoint integration to connect to your external SharePoint server. You can take the option to connect later. You then need to run all of your readiness checks. These check can save your life! it will check all of the settings that you have entered as well as checking all the external services are configures and running properly. There are two reasons that TFS 2010 is so easy and painless to install where previous version were not. Microsoft changes the install to two steps, Install and configuration. The second reason is that they have pulled out all of the stops in making the install run all the checks necessary to make sure that once you start the install that it will complete. if you find any errors I recommend that you report them on http://connect.microsoft.com so everyone can benefit from your misery. Figure: Now we have everything setup the configuration wizard can do its work. Figure: Took a while on the “Web site” stage for some point, but zipped though after that. Figure: last wee bit. TFS Needs to do a little tinkering with the data to complete the upgrade. Figure: All upgraded. I am not worried about the yellow triangle as SharePoint was being a little silly Exception Message: TF254021: The account name or password that you specified is not valid. (type TfsAdminException) Exception Stack Trace: at Microsoft.TeamFoundation.Management.Controls.WizardCommon.AccountSelectionControl.TestLogon(String connectionString) at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument) [Info @16:10:16.307] Benign exception caught as part of verify: Exception Message: TF255329: The following site could not be accessed: http://projects.ssw.com.au/. The server that you specified did not return the expected response. Either you have not installed the Team Foundation Server Extensions for SharePoint Products on this server, or a firewall is blocking access to the specified site or the SharePoint Central Administration site. For more information, see the Microsoft Web site (http://go.microsoft.com/fwlink/?LinkId=161206). (type TeamFoundationServerException) Exception Stack Trace: at Microsoft.TeamFoundation.Client.SharePoint.WssUtilities.VerifyTeamFoundationSharePointExtensions(ICredentials credentials, Uri url) at Microsoft.TeamFoundation.Admin.VerifySharePointSitesUrl.Verify() Inner Exception Details: Exception Message: TF249064: The following Web service returned an response that is not valid: http://projects.ssw.com.au/_vti_bin/TeamFoundationIntegrationService.asmx. This Web service is used for the Team Foundation Server Extensions for SharePoint Products. Either the extensions are not installed, the request resulted in HTML being returned, or there is a problem with the URL. Verify that the following URL points to a valid SharePoint Web application and that the application is available: http://projects.ssw.com.au. If the URL is correct and the Web application is operating normally, verify that a firewall is not blocking access to the Web application. (type TeamFoundationServerInvalidResponseException) Exception Data Dictionary: ResponseStatusCode = InternalServerError I’ll look at SharePoint after, probably the SharePoint box just needs a restart or a kick If there is a problem with SharePoint it will come out in testing, But I will definatly be passing this on to Microsoft. Upgrading the SharePoint connector to TFS 2010 You will need to upgrade the Extensions for SharePoint Products and Technologies on all of your SharePoint farm front end servers. To do this uninstall the TFS 2010 RC from it in the same way as the server, and then install just the RTM Extensions. Figure: Only install the SharePoint Extensions on your SharePoint front end servers. TFS 2010 supports both SharePoint 2007 and SharePoint 2010. Figure: When you configure SharePoint it uploads all of the solutions and templates. Figure: Everything is uploaded Successfully. Figure: TFS even remembered the settings from the previous installation, fantastic. Upgrading the Team Foundation Build Servers to TFS 2010 Just like on the SharePoint servers you will need to upgrade the Build Server to the RTM. Just uninstall TFS 2010 RC and then install only the Team Foundation Build Services component. Unlike on the SharePoint server you will probably have some version of Visual Studio installed. You will need to remove this as well. (Coming Soon) Connecting Visual Studio 2010 / 2008 / 2005 and Eclipse to TFS2010 If you have developers still on Visual Studio 2005 or 2008 you will need do download the respective compatibility pack: Visual Studio Team System 2005 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 Visual Studio Team System 2008 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 If you are using Eclipse you can download the new Team Explorer Everywhere install for connecting to TFS. Get your developers to check that you have the latest version of your applications with SSW Diagnostic which will check for Service Packs and hot fixes to Visual Studio as well. Technorati Tags: TFS,TFS2010,TFS 2010,Upgrade

Read the article

Differences Between NHibernate and Entity Framework

- by Ricardo Peres

Introduction NHibernate and Entity Framework are two of the most popular O/RM frameworks on the .NET world. Although they share some functionality, there are some aspects on which they are quite different. This post will describe this differences and will hopefully help you get started with the one you know less. Mind you, this is a personal selection of features to compare, it is by no way an exhaustive list. History First, a bit of history. NHibernate is an open-source project that was first ported from Java’s venerable Hibernate framework, one of the first O/RM frameworks, but nowadays it is not tied to it, for example, it has .NET specific features, and has evolved in different ways from those of its Java counterpart. Current version is 3.3, with 3.4 on the horizon. It currently targets .NET 3.5, but can be used as well in .NET 4, it only makes no use of any of its specific functionality. You can find its home page at NHForge. Entity Framework 1 came out with .NET 3.5 and is now on its second major version, despite being version 4. Code First sits on top of it and but came separately and will also continue to be released out of line with major .NET distributions. It is currently on version 4.3.1 and version 5 will be released together with .NET Framework 4.5. All versions will target the current version of .NET, at the time of their release. Its home location is located at MSDN. Architecture In NHibernate, there is a separation between the Unit of Work and the configuration and model instances. You start off by creating a Configuration object, where you specify all global NHibernate settings such as the database and dialect to use, the batch sizes, the mappings, etc, then you build an ISessionFactory from it. The ISessionFactory holds model and metadata that is tied to a particular database and to the settings that came from the Configuration object, and, there will typically be only one instance of each in a process. Finally, you create instances of ISession from the ISessionFactory, which is the NHibernate representation of the Unit of Work and Identity Map. This is a lightweight object, it basically opens and closes a database connection as required and keeps track of the entities associated with it. ISession objects are cheap to create and dispose, because all of the model complexity is stored in the ISessionFactory and Configuration objects. As for Entity Framework, the ObjectContext/DbContext holds the configuration, model and acts as the Unit of Work, holding references to all of the known entity instances. This class is therefore not lightweight as its NHibernate counterpart and it is not uncommon to see examples where an instance is cached on a field. Mappings Both NHibernate and Entity Framework (Code First) support the use of POCOs to represent entities, no base classes are required (or even possible, in the case of NHibernate). As for mapping to and from the database, NHibernate supports three types of mappings: XML-based, which have the advantage of not tying the entity classes to a particular O/RM; the XML files can be deployed as files on the file system or as embedded resources in an assembly; Attribute-based, for keeping both the entities and database details on the same place at the expense of polluting the entity classes with NHibernate-specific attributes; Strongly-typed code-based, which allows dynamic creation of the model and strongly typing it, so that if, for example, a property name changes, the mapping will also be updated. Entity Framework can use: Attribute-based (although attributes cannot express all of the available possibilities – for example, cascading); Strongly-typed code mappings. Database Support With NHibernate you can use mostly any database you want, including: SQL Server; SQL Server Compact; SQL Server Azure; Oracle; DB2; PostgreSQL; MySQL; Sybase Adaptive Server/SQL Anywhere; Firebird; SQLLite; Informix; Any through OLE DB; Any through ODBC. Out of the box, Entity Framework only supports SQL Server, but a number of providers exist, both free and commercial, for some of the most used databases, such as Oracle and MySQL. See a list here. Inheritance Strategies Both NHibernate and Entity Framework support the three canonical inheritance strategies: Table Per Type Hierarchy (Single Table Inheritance), Table Per Type (Class Table Inheritance) and Table Per Concrete Type (Concrete Table Inheritance). Associations Regarding associations, both support one to one, one to many and many to many. However, NHibernate offers far more collection types: Bags of entities or values: unordered, possibly with duplicates; Lists of entities or values: ordered, indexed by a number column; Maps of entities or values: indexed by either an entity or any value; Sets of entities or values: unordered, no duplicates; Arrays of entities or values: indexed, immutable. Querying NHibernate exposes several querying APIs: LINQ is probably the most used nowadays, and really does not need to be introduced; Hibernate Query Language (HQL) is a database-agnostic, object-oriented SQL-alike language that exists since NHibernate’s creation and still offers the most advanced querying possibilities; well suited for dynamic queries, even if using string concatenation; Criteria API is an implementation of the Query Object pattern where you create a semi-abstract conceptual representation of the query you wish to execute by means of a class model; also a good choice for dynamic querying; Query Over offers a similar API to Criteria, but using strongly-typed LINQ expressions instead of strings; for this, although more refactor-friendlier that Criteria, it is also less suited for dynamic queries; SQL, including stored procedures, can also be used; Integration with Lucene.NET indexer is available. As for Entity Framework: LINQ to Entities is fully supported, and its implementation is considered very complete; it is the API of choice for most developers; Entity-SQL, HQL’s counterpart, is also an object-oriented, database-independent querying language that can be used for dynamic queries; SQL, of course, is also supported. Caching Both NHibernate and Entity Framework, of course, feature first-level cache. NHibernate also supports a second-level cache, that can be used among multiple ISessionFactorys, even in different processes/machines: Hashtable (in-memory); SysCache (uses ASP.NET as the cache provider); SysCache2 (same as above but with support for SQL Server SQL Dependencies); Prevalence; SharedCache; Memcached; Redis; NCache; Appfabric Caching. Out of the box, Entity Framework does not have any second-level cache mechanism, however, there are some public samples that show how we can add this. ID Generators NHibernate supports different ID generation strategies, coming from the database and otherwise: Identity (for SQL Server, MySQL, and databases who support identity columns); Sequence (for Oracle, PostgreSQL, and others who support sequences); Trigger-based; HiLo; Sequence HiLo (for databases that support sequences); Several GUID flavors, both in GUID as well as in string format; Increment (for single-user uses); Assigned (must know what you’re doing); Sequence-style (either uses an actual sequence or a single-column table); Table of ids; Pooled (similar to HiLo but stores high values in a table); Native (uses whatever mechanism the current database supports, identity or sequence). Entity Framework only supports: Identity generation; GUIDs; Assigned values. Properties NHibernate supports properties of entity types (one to one or many to one), collections (one to many or many to many) as well as scalars and enumerations. It offers a mechanism for having complex property types generated from the database, which even include support for querying. It also supports properties originated from SQL formulas. Entity Framework only supports scalars, entity types and collections. Enumerations support will come in the next version. Events and Interception NHibernate has a very rich event model, that exposes more than 20 events, either for synchronous pre-execution or asynchronous post-execution, including: Pre/Post-Load; Pre/Post-Delete; Pre/Post-Insert; Pre/Post-Update; Pre/Post-Flush. It also features interception of class instancing and SQL generation. As for Entity Framework, only two events exist: ObjectMaterialized (after loading an entity from the database); SavingChanges (before saving changes, which include deleting, inserting and updating). Tracking Changes For NHibernate as well as Entity Framework, all changes are tracked by their respective Unit of Work implementation. Entities can be attached and detached to it, Entity Framework does, however, also support self-tracking entities. Optimistic Concurrency Control NHibernate supports all of the imaginable scenarios: SQL Server’s ROWVERSION; Oracle’s ORA_ROWSCN; A column containing date and time; A column containing a version number; All/dirty columns comparison. Entity Framework is more focused on Entity Framework, so it only supports: SQL Server’s ROWVERSION; Comparing all/some columns. Batching NHibernate has full support for insertion batching, but only if the ID generator in use is not database-based (for example, it cannot be used with Identity), whereas Entity Framework has no batching at all. Cascading Both support cascading for collections and associations: when an entity is deleted, their conceptual children are also deleted. NHibernate also offers the possibility to set the foreign key column on children to NULL instead of removing them. Flushing Changes NHibernate’s ISession has a FlushMode property that can have the following values: Auto: changes are sent to the database when necessary, for example, if there are dirty instances of an entity type, and a query is performed against this entity type, or if the ISession is being disposed; Commit: changes are sent when committing the current transaction; Never: changes are only sent when explicitly calling Flush(). As for Entity Framework, changes have to be explicitly sent through a call to AcceptAllChanges()/SaveChanges(). Lazy Loading NHibernate supports lazy loading for Associated entities (one to one, many to one); Collections (one to many, many to many); Scalar properties (thing of BLOBs or CLOBs). Entity Framework only supports lazy loading for: Associated entities; Collections. Generating and Updating the Database Both NHibernate and Entity Framework Code First (with the Migrations API) allow creating the database model from the mapping and updating it if the mapping changes. Extensibility As you can guess, NHibernate is far more extensible than Entity Framework. Basically, everything can be extended, from ID generation, to LINQ to SQL transformation, HQL native SQL support, custom column types, custom association collections, SQL generation, supported databases, etc. With Entity Framework your options are more limited, at least, because practically no information exists as to what can be extended/changed. It features a provider model that can be extended to support any database. Integration With Other Microsoft APIs and Tools When it comes to integration with Microsoft technologies, it will come as no surprise that Entity Framework offers the best support. For example, the following technologies are fully supported: ASP.NET (through the EntityDataSource); ASP.NET Dynamic Data; WCF Data Services; WCF RIA Services; Visual Studio (through the integrated designer). Documentation This is another point where Entity Framework is superior: NHibernate lacks, for starters, an up to date API reference synchronized with its current version. It does have a community mailing list, blogs and wikis, although not much used. Entity Framework has a number of resources on MSDN and, of course, several forums and discussion groups exist. Conclusion Like I said, this is a personal list. I may come as a surprise to some that Entity Framework is so behind NHibernate in so many aspects, but it is true that NHibernate is much older and, due to its open-source nature, is not tied to product-specific timeframes and can thus evolve much more rapidly. I do like both, and I chose whichever is best for the job I have at hands. I am looking forward to the changes in EF5 which will add significant value to an already interesting product. So, what do you think? Did I forget anything important or is there anything else worth talking about? Looking forward for your comments!

Read the article

CodePlex Daily Summary for Thursday, February 25, 2010

CodePlex Daily Summary for Thursday, February 25, 2010New ProjectsAptusSoftware.Threading: AptusSoftware.Threading is a class library designed primarily to assist in the development of multi-threaded WinForm applications, although there i...AxiomGameDesigner: It is going to be a universal scene editor for Axiom 3D game engine. It is in pure C# and will be kept portable to MONO for compatibility with linu...Badger - Unity Productivity Extensions: A set of Microsoft Unity Extensions. Why Badger? Because I love badgers.Business & System Analysis Templates and Best Practices for Russian: http://saway.codeplex.com/Conectayas: Conectayas is an open source "Connect Four" alike game but transformable to "Tic-Tac-Toe" and to a lot of similar games that uses mouse. Written in...FastCode: .NET 3.5 Extensions set to increase coding speed.Hundiyas: Hundiyas is an open source "Battleship" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses mouse. This cross-platform and cro...Icelandic Online Banking: Icelandic Online Banking is project defining a web service interface for online banking.IE8 AddOns XML Creator: Application that helps on creating the xml files for IE8 Accelerators, Search Providers and the markup for Web Slices.iKnowledge: a asp.net mvc demoLearn ASP.NET MVC: Learn ASP.NET MVC is a project for the members of the Peer Learning group in Silicon Valley. It contains the SportsStore solution from the Pro ASP...Live at Education Meta Web-Service: Live at Education Meta Web-Service is intended to abstract from several technologies that are included in Live@edu set of services. This web-ser...Low level wave sound output for VB.NET: Low level sound output class for VB.NET using platform invocation services to call winmm.dllMailQ: MailQ makes it easier for developers to send mail messages from an application. The system sends mails based on a database queue system (store, se...Managed DXGI: Managed DXGI library is Fully managed wrapper writen on C# for DXGI 1.0 and 1.1 technology. It makes easier to support DXGI in managed application....Multivalue AutoComplete WinForms TextBox in C#: This project is a sample application that demonstrates how to create a multivalue WinForms textbox in C# using .NET Framework 3.5.Nifty CSharp Tools: Nifty CSharp Tools, will contain various tools and snippets. IRCBot, splashscreens, linq, world of warcraft log parsing, screenshot uploaders, twi...PHP MPQ: A port of StormLib to PHP for handling Blizzard MPQ files.RedDevils strategy - Project Hoshimi Programming Battle: Source Code of RedDevils strategy. Imagine Cup 2008 - Project Hoshimi Programming Battle.RNUNIT: rNunit is a distributed Nunit project. Many application these days are client-server application, distributed application and regular unit testing ...Samar Solution: Samar Solutions is a business system for office automation.Silverlight OOMRPG Game Engine: Silverlight OOMRPG Game EngineSimulator: GPSSimulatorSLARToolkit - Silverlight Augmented Reality Toolkit: SLARToolkit is a flexible Augmented Reality library for Silverlight with the aim to make real time Augmented Reality applications with Silverlight ...Spiral Architecture Driven Development (SADD) for Russian: Это русская версия сайта sadd.codeplex.comSQLSnapshotManager: Easily manage SQL Server database snapshots in a easy to use visual interface.Twilio with VB.NET MVC: Twilio with VB.NET MVC is a sample application for developing with Twilio's REST based telephony API. It includes an XML Schema of the TwiML respon...Ultra Speed Dial: UltraSpeedDial.com - Online Speed Dial Page.Visual HTML Editor justHTML: justHTML - is simle windows-application WYSIWYG editor that allow everyone - without any knowledge of HTML - to create and edit web-pages. It supp...WinMTR.NET: .NET Clone of the popular Windows clone of the popular Linux Matt's TracerouteWPF Dialogs: "WPF Dialogs" is a library for different Dialogs in WPF (e.g. FolderBrowseDialog, SaveFileDialog, OpenFileDialog etc.). These Dialogs are written i...WPFLogin: A small Login window in WPF and C#XNA PerformanceTimers: CPU Timers for Windows and Xbox360. Can track multiple threads, and presents output as a log on-screen.New ReleasesAptusSoftware.Threading: 2.0.0: First public release. This release is in production as part of several commercial applications and is stable. The source code download includes a...BizTalk Software Factory: BizTalk Software Factory v2.1: This is a service release for the BizTalk Software Factory for BizTalk Server 2009, containing so far: Fix for x64: the SN.EXE tool is now locate...Business & System Analysis Templates and Best Practices for Russian: R00 The Place reserver: Just to reserve the place Will be filled out soonChronos WPF: Chronos v1.0 Beta 2: Added a new SplashScreen Added a new Login View and implemented Log Off Added a new PasswordBoxHelper (http://www.codeproject.com/Articles/371...dotNetTips: dotNetTips.Utility 3.5 R2: This is a new release (version 3.5.0.3) compatible with .NET 3.5. Lots of new classes/features!! Requires SP1 if using the Entity Framework extensi...fleXdoc: template-based server-side document generator (docx): fleXdoc 1.0 beta 3: The third and final beta of fleXdoc. fleXdoc consists of a webservice and a (test)client for the service. Make sure you also download the testclien...FluentPS: FluentPS v1.0: - FluentPS is moved from ASMX to WCF interface of the Project Server Interface (PSI) - Impersonation changes to work in compliance with WCF interfa...FolderSize: FolderSize.Win32.1.0.4.0: FolderSize.Win32.1.0.3.0 A simple utility intended to be used to scan harddrives for the folders that take most place and display this to the user...iTuner - The iTunes Companion: iTuner 1.1.3707 Beta 3: As promised, the iTuner Automated Librarian is now available. This automatically cleans an entire album of dead tracks and duplicates as tracks ar...Live at Education Meta Web-Service: LAEMWS v 1.0 beta: Release Candidate for LAEMWS.Macaw Reusable Code Library: LanguageConfigurationSolution: This Solution helps developing a multi language publishing web siteManaged DXGI: Initial Release.: Base declaration of interfaces, most of them untested yet.Math.NET Numerics: 2010.2.24.667 Build: Latest alpha buildMiniTwitter: 1.08.1: MiniTwitter 1.08.1 更新内容変更インクリメンタル検索時には大文字小文字の区別をしないように変更クライアント名の表示を本家にあわせて from から via に変更修正公式 RT 時にステータスが上に表示されたり二重に表示されるバグを修正自分が自分へ返信...Multivalue AutoComplete WinForms TextBox in C#: 1.0 First public release: Multivalue autocomplete textbox control and host application in this release are released in a single Visual Studio 2008 projects. See my related b...NMock3: NMock3 - Beta3, .NET 3.5: This release has some exciting new features. Please start providing feedback on the tutorials. The first several are complete and the rest are no...nxAjax - an asp.net ajax library using jQuery: nxAjax v3 codeplex 7: nxAjax v3 codeplex 7 binary and test website. Bug Fixed: ajax:Form control Add: Drag and drop Rewritten: DragnDropManager DragPanel DropPan...Office Apps: 0.8.7: whats new? Document.Editor and Document.Viewer now supports FlowDocument (.xaml) files bug fix'sPDF Rider: PDF Rider 0.3: Application PrerequisitesMicrosoft Windows Operating Systems (XP (tested) - Vista - 7) Microsoft .NET Framework 3.5 runtime A PDF rendering sof...ShellLight: ShellLight 0.1.0.1 Src: Codeplex project released. This is only a preview of the product. Until the first final release there will be many improvements.Silverlight OOMRPG Game Engine: SilverlightGameTutorialSolution v1.01: Please visit my blog for Silverlight OOMROG Game Tutorial: http://www.cnblogs.com/Jax/archive/2010/02/24/1673053.html.Simple Savant: Simple Savant v0.4: Added support for full-text indexing (See Full-Text Indexing) Added support for attribute spanning and compression for property values larger tha...Spiral Architecture Driven Development (SADD) for Russian: R00: R00 to reserve site nameTeamReview - TFS Code Review: Release 1.1.3: Release Features New expanded product positioning for capturing any targeted coding work as a trackable, assignable, reportable Work Item for any r...Text Designer Outline Text Library: 10th minor release: Version 0.3.1 (10th minor release)Fixed the gradient brush being too big for the text, resulting in not much gradient shown in the text. Gradient...TFS Workflow Control: TeamExplorer and TSWA control 1.0 for TFS 2010 RC: This is a special version for TFS 2010 RC. Use the RC version of the power tools to modify the layout of your work items (http://visualstudiogaller...thinktecture WSCF.blue: WSCF.blue V1 Update (1.0.7) - VS2010 RC Support: This update adds support for Visual Studio 2010 RC in addition to Visual Studio 2008. Please note that Visual Studio 2010 Beta 2 is NOT supported a...Tumblen3: tumblen3 Version 25Feb2010: ready for Twitter's xAuthUMD文本编辑器: UMDEditor文本编辑器V2.1.0: 2.1.0 (2010-02-24) 增加查找章节内指定文本内容的功能 2.0.4 (2010-02-06) 章节内容框增加右键菜单，包含编辑文本的基本操作 ------------------------------------------------------- 执行 reg.bat ...VCC: Latest build, v2.1.30224.0: Automatic drop of latest buildVisual HTML Editor justHTML: Latest binary: Latest buid here. Executable and mshtml.dll included in this archive. Ready to use ;)Visual HTML Editor justHTML: Source code for version 2.5: Visual studio 2008 project with full source code.VOB2MKV: vob2mkv-1.0.2: The release vob2mkv-1.0.2 is a feature update of the VOB2MKV project. It now includes a DirectShow source filter, MKVSOURCE. A source filter allo...WinMTR.NET: V 1.0: V 1.0WPF Dialogs: Version 0.1.0: Version 0.1.0 FolderBrowseDialog is implementet for more information look here Version 0.1.0 (german: Version 0.1.0 - Deutsch).WPF Dialogs: Version 0.1.1: Version 0.1.1 Features FolderBrowseDialog was extended / FolderBrowseDialog - Deutsch wurde erweitertXNA PerformanceTimers: XNA PerformanceTimers 0.1: Initial release.Zeta Resource Editor: Release 2010-02-24: Added HTTP proxy server support.Most Popular ProjectsASP.NET Ajax LibraryManaged Extensibility FrameworkWindows 7 USB/DVD Download ToolDotNetZip LibraryMDownloaderVirtual Router - Wifi Hot Spot for Windows 7 / 2008 R2MFCMAPIDroid ExplorerUseful Sharepoint Designer Custom Workflow ActivitiesOxiteMost Active ProjectsDinnerNow.netBlogEngine.NETRawrInfoServiceSLARToolkit - Silverlight Augmented Reality ToolkitNB_Store - Free DotNetNuke Ecommerce Catalog ModuleSharpMap - Geospatial Application Framework for the CLRjQuery Library for SharePoint Web ServicesRapid Entity Framework. (ORM). CTP 2Common Context Adapters

Read the article

Access violation in DirectX OMSetRenderTargets

- by IDWMaster

I receive the following error (Unhandled exception at 0x527DAE81 (d3d11_1sdklayers.dll) in Lesson2.Triangles.exe: 0xC0000005: Access violation reading location 0x00000000) when running the Triangle sample application for DirectX 11 in D3D_FEATURE_LEVEL_9_1. This error occurs at the OMSetRenderTargets function, as shown below, and does not happen if I remove that function from the program (but then, the screen is blue, and does not render the triangle) //// THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF //// ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO //// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A //// PARTICULAR PURPOSE. //// //// Copyright (c) Microsoft Corporation. All rights reserved #include #include #include "DirectXSample.h" #include "BasicMath.h" #include "BasicReaderWriter.h" using namespace Microsoft::WRL; using namespace Windows::UI::Core; using namespace Windows::Foundation; using namespace Windows::ApplicationModel::Core; using namespace Windows::ApplicationModel::Infrastructure; // This class defines the application as a whole. ref class Direct3DTutorialViewProvider : public IViewProvider { private: CoreWindow^ m_window; ComPtr m_swapChain; ComPtr m_d3dDevice; ComPtr m_d3dDeviceContext; ComPtr m_renderTargetView; public: // This method is called on application launch. void Initialize( _In_ CoreWindow^ window, _In_ CoreApplicationView^ applicationView ) { m_window = window; } // This method is called after Initialize. void Load(_In_ Platform::String^ entryPoint) { } // This method is called after Load. void Run() { // First, create the Direct3D device. // This flag is required in order to enable compatibility with Direct2D. UINT creationFlags = D3D11_CREATE_DEVICE_BGRA_SUPPORT; #if defined(_DEBUG) // If the project is in a debug build, enable debugging via SDK Layers with this flag. creationFlags |= D3D11_CREATE_DEVICE_DEBUG; #endif // This array defines the ordering of feature levels that D3D should attempt to create. D3D_FEATURE_LEVEL featureLevels[] = { D3D_FEATURE_LEVEL_11_1, D3D_FEATURE_LEVEL_11_0, D3D_FEATURE_LEVEL_10_1, D3D_FEATURE_LEVEL_10_0, D3D_FEATURE_LEVEL_9_3, D3D_FEATURE_LEVEL_9_1 }; ComPtr d3dDevice; ComPtr d3dDeviceContext; DX::ThrowIfFailed( D3D11CreateDevice( nullptr, // specify nullptr to use the default adapter D3D_DRIVER_TYPE_HARDWARE, nullptr, // leave as nullptr if hardware is used creationFlags, // optionally set debug and Direct2D compatibility flags featureLevels, ARRAYSIZE(featureLevels), D3D11_SDK_VERSION, // always set this to D3D11_SDK_VERSION &d3dDevice, nullptr, &d3dDeviceContext ) ); // Retrieve the Direct3D 11.1 interfaces. DX::ThrowIfFailed( d3dDevice.As(&m_d3dDevice) ); DX::ThrowIfFailed( d3dDeviceContext.As(&m_d3dDeviceContext) ); // After the D3D device is created, create additional application resources. CreateWindowSizeDependentResources(); // Create a Basic Reader-Writer class to load data from disk. This class is examined // in the Resource Loading sample. BasicReaderWriter^ reader = ref new BasicReaderWriter(); // Load the raw vertex shader bytecode from disk and create a vertex shader with it. auto vertexShaderBytecode = reader-ReadData("SimpleVertexShader.cso"); ComPtr vertexShader; DX::ThrowIfFailed( m_d3dDevice-CreateVertexShader( vertexShaderBytecode-Data, vertexShaderBytecode-Length, nullptr, &vertexShader ) ); // Create an input layout that matches the layout defined in the vertex shader code. // For this lesson, this is simply a float2 vector defining the vertex position. const D3D11_INPUT_ELEMENT_DESC basicVertexLayoutDesc[] = { { "POSITION", 0, DXGI_FORMAT_R32G32_FLOAT, 0, 0, D3D11_INPUT_PER_VERTEX_DATA, 0 }, }; ComPtr inputLayout; DX::ThrowIfFailed( m_d3dDevice-CreateInputLayout( basicVertexLayoutDesc, ARRAYSIZE(basicVertexLayoutDesc), vertexShaderBytecode-Data, vertexShaderBytecode-Length, &inputLayout ) ); // Load the raw pixel shader bytecode from disk and create a pixel shader with it. auto pixelShaderBytecode = reader-ReadData("SimplePixelShader.cso"); ComPtr pixelShader; DX::ThrowIfFailed( m_d3dDevice-CreatePixelShader( pixelShaderBytecode-Data, pixelShaderBytecode-Length, nullptr, &pixelShader ) ); // Create vertex and index buffers that define a simple triangle. float3 triangleVertices[] = { float3(-0.5f, -0.5f,13.5f), float3( 0.0f, 0.5f,0), float3( 0.5f, -0.5f,0), }; D3D11_BUFFER_DESC vertexBufferDesc = {0}; vertexBufferDesc.ByteWidth = sizeof(float3) * ARRAYSIZE(triangleVertices); vertexBufferDesc.Usage = D3D11_USAGE_DEFAULT; vertexBufferDesc.BindFlags = D3D11_BIND_VERTEX_BUFFER; vertexBufferDesc.CPUAccessFlags = 0; vertexBufferDesc.MiscFlags = 0; vertexBufferDesc.StructureByteStride = 0; D3D11_SUBRESOURCE_DATA vertexBufferData; vertexBufferData.pSysMem = triangleVertices; vertexBufferData.SysMemPitch = 0; vertexBufferData.SysMemSlicePitch = 0; ComPtr vertexBuffer; DX::ThrowIfFailed( m_d3dDevice-CreateBuffer( &vertexBufferDesc, &vertexBufferData, &vertexBuffer ) ); // Once all D3D resources are created, configure the application window. // Allow the application to respond when the window size changes. m_window-SizeChanged += ref new TypedEventHandler( this, &Direct3DTutorialViewProvider::OnWindowSizeChanged ); // Specify the cursor type as the standard arrow cursor. m_window-PointerCursor = ref new CoreCursor(CoreCursorType::Arrow, 0); // Activate the application window, making it visible and enabling it to receive events. m_window-Activate(); // Enter the render loop. Note that tailored applications should never exit. while (true) { // Process events incoming to the window. m_window-Dispatcher-ProcessEvents(CoreProcessEventsOption::ProcessAllIfPresent); // Specify the render target we created as the output target. ID3D11RenderTargetView* targets[1] = {m_renderTargetView.Get()}; m_d3dDeviceContext-OMSetRenderTargets( 1, targets, NULL // use no depth stencil ); // Clear the render target to a solid color. const float clearColor[4] = { 0.071f, 0.04f, 0.561f, 1.0f }; //Code fails here m_d3dDeviceContext-ClearRenderTargetView( m_renderTargetView.Get(), clearColor ); m_d3dDeviceContext-IASetInputLayout(inputLayout.Get()); // Set the vertex and index buffers, and specify the way they define geometry. UINT stride = sizeof(float3); UINT offset = 0; m_d3dDeviceContext-IASetVertexBuffers( 0, 1, vertexBuffer.GetAddressOf(), &stride, &offset ); m_d3dDeviceContext-IASetPrimitiveTopology(D3D11_PRIMITIVE_TOPOLOGY_TRIANGLELIST); // Set the vertex and pixel shader stage state. m_d3dDeviceContext-VSSetShader( vertexShader.Get(), nullptr, 0 ); m_d3dDeviceContext-PSSetShader( pixelShader.Get(), nullptr, 0 ); // Draw the cube. m_d3dDeviceContext-Draw(3,0); // Present the rendered image to the window. Because the maximum frame latency is set to 1, // the render loop will generally be throttled to the screen refresh rate, typically around // 60Hz, by sleeping the application on Present until the screen is refreshed. DX::ThrowIfFailed( m_swapChain-Present(1, 0) ); } } // This method is called before the application exits. void Uninitialize() { } private: // This method is called whenever the application window size changes. void OnWindowSizeChanged( _In_ CoreWindow^ sender, _In_ WindowSizeChangedEventArgs^ args ) { m_renderTargetView = nullptr; CreateWindowSizeDependentResources(); } // This method creates all application resources that depend on // the application window size. It is called at app initialization, // and whenever the application window size changes. void CreateWindowSizeDependentResources() { if (m_swapChain != nullptr) { // If the swap chain already exists, resize it. DX::ThrowIfFailed( m_swapChain-ResizeBuffers( 2, 0, 0, DXGI_FORMAT_R8G8B8A8_UNORM, 0 ) ); } else { // If the swap chain does not exist, create it. DXGI_SWAP_CHAIN_DESC1 swapChainDesc = {0}; swapChainDesc.Stereo = false; swapChainDesc.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT; swapChainDesc.Scaling = DXGI_SCALING_NONE; swapChainDesc.Flags = 0; // Use automatic sizing. swapChainDesc.Width = 0; swapChainDesc.Height = 0; // This is the most common swap chain format. swapChainDesc.Format = DXGI_FORMAT_R8G8B8A8_UNORM; // Don't use multi-sampling. swapChainDesc.SampleDesc.Count = 1; swapChainDesc.SampleDesc.Quality = 0; // Use two buffers to enable flip effect. swapChainDesc.BufferCount = 2; // We recommend using this swap effect for all applications. swapChainDesc.SwapEffect = DXGI_SWAP_EFFECT_FLIP_SEQUENTIAL; // Once the swap chain description is configured, it must be // created on the same adapter as the existing D3D Device. // First, retrieve the underlying DXGI Device from the D3D Device. ComPtr dxgiDevice; DX::ThrowIfFailed( m_d3dDevice.As(&dxgiDevice) ); // Ensure that DXGI does not queue more than one frame at a time. This both reduces // latency and ensures that the application will only render after each VSync, minimizing // power consumption. DX::ThrowIfFailed( dxgiDevice-SetMaximumFrameLatency(1) ); // Next, get the parent factory from the DXGI Device. ComPtr dxgiAdapter; DX::ThrowIfFailed( dxgiDevice-GetAdapter(&dxgiAdapter) ); ComPtr dxgiFactory; DX::ThrowIfFailed( dxgiAdapter-GetParent( __uuidof(IDXGIFactory2), &dxgiFactory ) ); // Finally, create the swap chain. DX::ThrowIfFailed( dxgiFactory-CreateSwapChainForImmersiveWindow( m_d3dDevice.Get(), DX::GetIUnknown(m_window), &swapChainDesc, nullptr, // allow on all displays &m_swapChain ) ); } // Once the swap chain is created, create a render target view. This will // allow Direct3D to render graphics to the window. ComPtr backBuffer; DX::ThrowIfFailed( m_swapChain-GetBuffer( 0, __uuidof(ID3D11Texture2D), &backBuffer ) ); DX::ThrowIfFailed( m_d3dDevice-CreateRenderTargetView( backBuffer.Get(), nullptr, &m_renderTargetView ) ); // After the render target view is created, specify that the viewport, // which describes what portion of the window to draw to, should cover // the entire window. D3D11_TEXTURE2D_DESC backBufferDesc = {0}; backBuffer-GetDesc(&backBufferDesc); D3D11_VIEWPORT viewport; viewport.TopLeftX = 0.0f; viewport.TopLeftY = 0.0f; viewport.Width = static_cast(backBufferDesc.Width); viewport.Height = static_cast(backBufferDesc.Height); viewport.MinDepth = D3D11_MIN_DEPTH; viewport.MaxDepth = D3D11_MAX_DEPTH; m_d3dDeviceContext-RSSetViewports(1, &viewport); } }; // This class defines how to create the custom View Provider defined above. ref class Direct3DTutorialViewProviderFactory : IViewProviderFactory { public: IViewProvider^ CreateViewProvider() { return ref new Direct3DTutorialViewProvider(); } }; [Platform::MTAThread] int main(array^) { auto viewProviderFactory = ref new Direct3DTutorialViewProviderFactory(); Windows::ApplicationModel::Core::CoreApplication::Run(viewProviderFactory); return 0; }

Read the article

Mauritius Software Craftsmanship Community

There we go! I finally managed to push myself forward and pick up an old, actually too old, idea since I ever arrived here in Mauritius more than six years ago. I'm talking about a community for all kind of ICT connected people. In the past (back in Germany), I used to be involved in various community activities. For example, I was part of the Microsoft Community Leader/Influencer Program (CLIP) in Germany due to an FAQ on Visual FoxPro, actually Active FoxPro Pages (AFP) to be more precise. Then in 2003/2004 I addressed the responsible person of the dFPUG user group in Speyer in order to assist him in organising monthly user group meetings. Well, he handed over management completely, and attended our meetings regularly. Why did it take you so long? Well, I don't want to bother you with the details but short version is that I was too busy on either job (building up new companies) or private life (got married and we have two lovely children, eh 'monsters') or even both. But now is the time where I was starting to look for new fields given the fact that I gained some spare time. My businesses are up and running, the kids are in school, and I am finally in a position where I can commit myself again to community activities. And I love to do that! Why a new user group? Good question... And 'easy' to answer. Since back in 2007 I did my usual research, eh Google searches, to see whether there existing user groups in Mauritius and in which field of interest. And yes, there are! If I recall this correctly, then there are communities for PHP, Drupal, Python (just recently), Oracle, and Linux (which used to be even two). But... either they do not exist anymore, they are dormant, or there is only a low heart-beat, frankly speaking. And yes, I went to meetings of the Linux User Group Meta (Mauritius) back in 2010/2011 and just recently. I really like the setup and the way the LUGM is organised. It's just that I have a slightly different point of view on how a user group or community should organise itself and how to approach future members. Don't get me wrong, I'm not criticizing others doing a very good job, I'm only saying that I'd like to do it differently. The last meeting of the LUGM was awesome; read my feedback about it. Ok, so what's up with 'Mauritius Software Craftsmanship Community' or short: MSCC? As I've already written in my article on 'Communities - The importance of exchange and discussion' I think it is essential in a world of IT to stay 'connected' with a good number of other people in the same field. There is so much dynamic and every day's news that it is almost impossible to keep on track with all of them. The MSCC is going to provide a common platform to exchange experience and share knowledge between each other. You might be a newbie and want to know what to expect working as a software developer, or as a database administrator, or maybe as an IT systems administrator, or you're an experienced geek that loves to share your ideas or solutions that you implemented to solve a specific problem, or you're the business (or HR) guy that is looking for 'fresh' blood to enforce your existing team. Or... you're just interested and you'd like to communicate with like-minded people. Meetup of 26.06.2013 @ L'arabica: Of course there are laptops around. Free WiFi, power outlet, coffee, code and Linux in one go. The MSCC is technology-agnostic and spans an umbrella over any kind of technology. Simply because you can't ignore other technologies anymore in a connected IT world as we have. A front-end developer for iOS applications should have the chance to connect with a Python back-end coder and eventually with a DBA for MySQL or PostgreSQL and exchange their experience. Furthermore, I'm a huge fan of cross-platform development, and it is very pleasant to have pure Web developers - with all that HTML5, CSS3, JavaScript and JS libraries stuff - and passionate C# or Java coders at the same table. This diversity of knowledge can assist and boost your personal situation. And last but not least, there are projects and open positions 'flying' around... People might like to hear others opinion about an employer or get new impulses on how to tackle down an issue at their workspace, etc. This is about community. And that's how I see the MSCC in general - free of any limitations be it by programming language or technology. Having the chance to exchange experience and to discuss certain aspects of technology saves you time and money, and it's a pleasure to enjoy. Compared to dusty books and remote online resources. It's human! Organising meetups (meetings, get-together, gatherings - you name it!) As of writing this article, the MSCC is currently meeting every Wednesday for the weekly 'Code & Coffee' session at various locations (suggestions are welcome!) in Mauritius. This might change in the future eventually but especially at the beginning I think it is very important to create awareness in the Mauritian IT world. Yes, we are here! Come and join us! ;-) The MSCC's main online presence is located at Meetup.com because it allows me to handle the organisation of events and meeting appointments very easily, and any member can have a look who else is involved so that an exchange of contacts is given at any time. In combination with the other entities (G+ Communities, FB Pages or in Groups) I advertise and manage all future activities here: Mauritius Software Craftsmanship Community This is a community for those who care and are proud of what they do. For those developers, regardless how experienced they are, who want to improve and master their craft. This is a community for those who believe that being average is just not good enough. I know, there are not many 'craftsmen' yet but it's a start... Let's see how it looks like by the end of the year. There are free smartphone apps for Android and iOS from Meetup.com that allow you to keep track of meetings and to stay informed on latest updates. And last but not least, there is a Trello workspace to collect and share ideas and provide downloads of slides, etc. Trello is also available as free smartphone app. Sharing is caring! As mentioned, the #MSCC is present in various social media networks in order to cover as many people as possible here in Mauritius. Following is an overview of the current networks: Twitter - Latest updates and quickies Google+ - Community channel Facebook - Community Page LinkedIn - Community Group Trello - Collaboration workspace to share and develop ideas Hopefully, this covers the majority of computer-related people in Mauritius. Please spread the word about the #MSCC between your colleagues, your friends and other interested 'geeks'. Your future looks bright Running and participating in a user group or any kind of community usually provides quite a number of advantages for anyone. On the one side it is very joyful for me to organise appointments and get in touch with people that might be interested to present a little demo of their projects or their recent problems they had to tackle down, and on the other side there are lots of companies that have various support programs or sponsorships especially tailored for user groups. At the moment, I already have a couple of gimmicks that I would like to hand out in small contests or raffles during one of the upcoming meetings, and as said, companies provide all kind of goodies, books free of charge, or sometimes even licenses for communities. Meeting other software developers or IT guys also opens up your point of view on the local market and there might be interesting projects or job offers available, too. A community like the Mauritius Software Craftsmanship Community is great for freelancers, self-employed, students and of course employees. Meetings will be organised on a regular basis, and I'm open to all kind of suggestions from you. Please leave a comment here in blog or join the conversations in the above mentioned social networks. Let's get this community up and running, my fellow Mauritians! Recent updates The MSCC is now officially participating in the O'Reilly UK User Group programm and we are allowed to request review or recension copies of recent titles. Additionally, we have a discount code for any books or ebooks that you might like to order on shop.oreilly.com. More applications for user group sponsorship programms are pending and I'm looking forward to a couple of announcement very soon. And... we need some kind of 'corporate identity' - Over at the MSCC website there is a call for action (or better said a contest with prizes) to create a unique design for the MSCC. This would include a decent colour palette, a logo, graphical banners for Meetup, Google+, Facebook, LinkedIn, etc. and of course badges for our craftsmen to add to their personal blogs and websites. Please spread the word and contribute. Thanks!

Read the article

Creating a dynamic proxy generator – Part 1 – Creating the Assembly builder, Module builder and cach

- by SeanMcAlinden

I’ve recently started a project with a few mates to learn the ins and outs of Dependency Injection, AOP and a number of other pretty crucial patterns of development as we’ve all been using these patterns for a while but have relied totally on third part solutions to do the magic. We thought it would be interesting to really get into the details by rolling our own IoC container and hopefully learn a lot on the way, and you never know, we might even create an excellent framework. The open source project is called Rapid IoC and is hosted at http://rapidioc.codeplex.com/ One of the most interesting tasks for me is creating the dynamic proxy generator for enabling Aspect Orientated Programming (AOP). In this series of articles, I’m going to track each step I take for creating the dynamic proxy generator and I’ll try my best to explain what everything means - mainly as I’ll be using Reflection.Emit to emit a fair amount of intermediate language code (IL) to create the proxy types at runtime which can be a little taxing to read. It’s worth noting that building the proxy is without a doubt going to be slightly painful so I imagine there will be plenty of areas I’ll need to change along the way. Anyway lets get started… Part 1 - Creating the Assembly builder, Module builder and caching mechanism Part 1 is going to be a really nice simple start, I’m just going to start by creating the assembly, module and type caches. The reason we need to create caches for the assembly, module and types is simply to save the overhead of recreating proxy types that have already been generated, this will be one of the important steps to ensure that the framework is fast… kind of important as we’re calling the IoC container ‘Rapid’ – will be a little bit embarrassing if we manage to create the slowest framework. The Assembly builder The assembly builder is what is used to create an assembly at runtime, we’re going to have two overloads, one will be for the actual use of the proxy generator, the other will be mainly for testing purposes as it will also save the assembly so we can use Reflector to examine the code that has been created. Here’s the code: DynamicAssemblyBuilder using System; using System.Reflection; using System.Reflection.Emit; namespace Rapid.DynamicProxy.Assembly { /// <summary> /// Class for creating an assembly builder. /// </summary> internal static class DynamicAssemblyBuilder { #region Create /// <summary> /// Creates an assembly builder. /// </summary> /// <param name="assemblyName">Name of the assembly.</param> public static AssemblyBuilder Create(string assemblyName) { AssemblyName name = new AssemblyName(assemblyName); AssemblyBuilder assembly = AppDomain.CurrentDomain.DefineDynamicAssembly( name, AssemblyBuilderAccess.Run); DynamicAssemblyCache.Add(assembly); return assembly; } /// <summary> /// Creates an assembly builder and saves the assembly to the passed in location. /// </summary> /// <param name="assemblyName">Name of the assembly.</param> /// <param name="filePath">The file path.</param> public static AssemblyBuilder Create(string assemblyName, string filePath) { AssemblyName name = new AssemblyName(assemblyName); AssemblyBuilder assembly = AppDomain.CurrentDomain.DefineDynamicAssembly( name, AssemblyBuilderAccess.RunAndSave, filePath); DynamicAssemblyCache.Add(assembly); return assembly; } #endregion } } So hopefully the above class is fairly explanatory, an AssemblyName is created using the passed in string for the actual name of the assembly. An AssemblyBuilder is then constructed with the current AppDomain and depending on the overload used, it is either just run in the current context or it is set up ready for saving. It is then added to the cache. DynamicAssemblyCache using System.Reflection.Emit; using Rapid.DynamicProxy.Exceptions; using Rapid.DynamicProxy.Resources.Exceptions; namespace Rapid.DynamicProxy.Assembly { /// <summary> /// Cache for storing the dynamic assembly builder. /// </summary> internal static class DynamicAssemblyCache { #region Declarations private static object syncRoot = new object(); internal static AssemblyBuilder Cache = null; #endregion #region Adds a dynamic assembly to the cache. /// <summary> /// Adds a dynamic assembly builder to the cache. /// </summary> /// <param name="assemblyBuilder">The assembly builder.</param> public static void Add(AssemblyBuilder assemblyBuilder) { lock (syncRoot) { Cache = assemblyBuilder; } } #endregion #region Gets the cached assembly /// <summary> /// Gets the cached assembly builder. /// </summary> /// <returns></returns> public static AssemblyBuilder Get { get { lock (syncRoot) { if (Cache != null) { return Cache; } } throw new RapidDynamicProxyAssertionException(AssertionResources.NoAssemblyInCache); } } #endregion } } The cache is simply a static property that will store the AssemblyBuilder (I know it’s a little weird that I’ve made it public, this is for testing purposes, I know that’s a bad excuse but hey…) There are two methods for using the cache – Add and Get, these just provide thread safe access to the cache. The Module Builder The module builder is required as the create proxy classes will need to live inside a module within the assembly. Here’s the code: DynamicModuleBuilder using System.Reflection.Emit; using Rapid.DynamicProxy.Assembly; namespace Rapid.DynamicProxy.Module { /// <summary> /// Class for creating a module builder. /// </summary> internal static class DynamicModuleBuilder { /// <summary> /// Creates a module builder using the cached assembly. /// </summary> public static ModuleBuilder Create() { string assemblyName = DynamicAssemblyCache.Get.GetName().Name; ModuleBuilder moduleBuilder = DynamicAssemblyCache.Get.DefineDynamicModule (assemblyName, string.Format("{0}.dll", assemblyName)); DynamicModuleCache.Add(moduleBuilder); return moduleBuilder; } } } As you can see, the module builder is created on the assembly that lives in the DynamicAssemblyCache, the module is given the assembly name and also a string representing the filename if the assembly is to be saved. It is then added to the DynamicModuleCache. DynamicModuleCache using System.Reflection.Emit; using Rapid.DynamicProxy.Exceptions; using Rapid.DynamicProxy.Resources.Exceptions; namespace Rapid.DynamicProxy.Module { /// <summary> /// Class for storing the module builder. /// </summary> internal static class DynamicModuleCache { #region Declarations private static object syncRoot = new object(); internal static ModuleBuilder Cache = null; #endregion #region Add /// <summary> /// Adds a dynamic module builder to the cache. /// </summary> /// <param name="moduleBuilder">The module builder.</param> public static void Add(ModuleBuilder moduleBuilder) { lock (syncRoot) { Cache = moduleBuilder; } } #endregion #region Get /// <summary> /// Gets the cached module builder. /// </summary> /// <returns></returns> public static ModuleBuilder Get { get { lock (syncRoot) { if (Cache != null) { return Cache; } } throw new RapidDynamicProxyAssertionException(AssertionResources.NoModuleInCache); } } #endregion } } The DynamicModuleCache is very similar to the assembly cache, it is simply a statically stored module with thread safe Add and Get methods. The DynamicTypeCache To end off this post, I’m going to create the cache for storing the generated proxy classes. I’ve spent a fair amount of time thinking about the type of collection I should use to store the types and have finally decided that for the time being I’m going to use a generic dictionary. This may change when I can actually performance test the proxy generator but the time being I think it makes good sense in theory, mainly as it pretty much maintains it’s performance with varying numbers of items – almost constant (0)1. Plus I won’t ever need to loop through the items which is not the dictionaries strong point. Here’s the code as it currently stands: DynamicTypeCache using System; using System.Collections.Generic; using System.Security.Cryptography; using System.Text; namespace Rapid.DynamicProxy.Types { /// <summary> /// Cache for storing proxy types. /// </summary> internal static class DynamicTypeCache { #region Declarations static object syncRoot = new object(); public static Dictionary<string, Type> Cache = new Dictionary<string, Type>(); #endregion /// <summary> /// Adds a proxy to the type cache. /// </summary> /// <param name="type">The type.</param> /// <param name="proxy">The proxy.</param> public static void AddProxyForType(Type type, Type proxy) { lock (syncRoot) { Cache.Add(GetHashCode(type.AssemblyQualifiedName), proxy); } } /// <summary> /// Tries the type of the get proxy for. /// </summary> /// <param name="type">The type.</param> /// <returns></returns> public static Type TryGetProxyForType(Type type) { lock (syncRoot) { Type proxyType; Cache.TryGetValue(GetHashCode(type.AssemblyQualifiedName), out proxyType); return proxyType; } } #region Private Methods private static string GetHashCode(string fullName) { SHA1CryptoServiceProvider provider = new SHA1CryptoServiceProvider(); Byte[] buffer = Encoding.UTF8.GetBytes(fullName); Byte[] hash = provider.ComputeHash(buffer, 0, buffer.Length); return Convert.ToBase64String(hash); } #endregion } } As you can see, there are two public methods, one for adding to the cache and one for getting from the cache. Hopefully they should be clear enough, the Get is a TryGet as I do not want the dictionary to throw an exception if a proxy doesn’t exist within the cache. Other than that I’ve decided to create a key using the SHA1CryptoServiceProvider, this may change but my initial though is the SHA1 algorithm is pretty fast to put together using the provider and it is also very unlikely to have any hashing collisions. (there are some maths behind how unlikely this is – here’s the wiki if you’re interested http://en.wikipedia.org/wiki/SHA_hash_functions) Anyway, that’s the end of part 1 – although I haven’t started any of the fun stuff (by fun I mean hairpulling, teeth grating Relfection.Emit style fun), I’ve got the basis of the DynamicProxy in place so all we have to worry about now is creating the types, interceptor classes, method invocation information classes and finally a really nice fluent interface that will abstract all of the hard-core craziness away and leave us with a lightning fast, easy to use AOP framework. Hope you find the series interesting. All of the source code can be viewed and/or downloaded at our codeplex site - http://rapidioc.codeplex.com/ Kind Regards, Sean.

Read the article

Getting Started Building Windows 8 Store Apps with XAML/C#

- by dwahlin

Technology is fun isn’t it? As soon as you think you’ve figured out where things are heading a new technology comes onto the scene, changes things up, and offers new opportunities. One of the new technologies I’ve been spending quite a bit of time with lately is Windows 8 store applications. I posted my thoughts about Windows 8 during the BUILD conference in 2011 and still feel excited about the opportunity there. Time will tell how well it ends up being accepted by consumers but I’m hopeful that it’ll take off. I currently have two Windows 8 store application concepts I’m working on with one being built in XAML/C# and another in HTML/JavaScript. I really like that Microsoft supports both options since it caters to a variety of developers and makes it easy to get started regardless if you’re a desktop developer or Web developer. Here’s a quick look at how the technologies are organized in Windows 8: In this post I’ll focus on the basics of Windows 8 store XAML/C# apps by looking at features, files, and code provided by Visual Studio projects. To get started building these types of apps you’ll definitely need to have some knowledge of XAML and C#. Let’s get started by looking at the Windows 8 store project types available in Visual Studio 2012. Windows 8 Store XAML/C# Project Types When you open Visual Studio 2012 you’ll see a new entry under C# named Windows Store. It includes 6 different project types as shown next. The Blank App project provides initial starter code and a single page whereas the Grid App and Split App templates provide quite a bit more code as well as multiple pages for your application. The other projects available can be be used to create a class library project that runs in Windows 8 store apps, a WinRT component such as a custom control, and a unit test library project respectively. If you’re building an application that displays data in groups using the “tile” concept then the Grid App or Split App project templates are a good place to start. An example of the initial screens generated by each project is shown next: Grid App Split View App When a user clicks a tile in a Grid App they can view details about the tile data. With a Split View app groups/categories are shown and when the user clicks on a group they can see a list of all the different items and then drill-down into them: For the remainder of this post I’ll focus on functionality provided by the Blank App project since it provides a simple way to get started learning the fundamentals of building Windows 8 store apps. Blank App Project Walkthrough The Blank App project is a great place to start since it’s simple and lets you focus on the basics. In this post I’ll focus on what it provides you out of the box and cover additional details in future posts. Once you have the basics down you can move to the other project types if you need the functionality they provide. The Blank App project template does exactly what it says – you get an empty project with a few starter files added to help get you going. This is a good option if you’ll be building an app that doesn’t fit into the grid layout view that you see a lot of Windows 8 store apps following (such as on the Windows 8 start screen). I ended up starting with the Blank App project template for the app I’m currently working on since I’m not displaying data/image tiles (something the Grid App project does well) or drilling down into lists of data (functionality that the Split App project provides). The Blank App project provides images for the tiles and splash screen (you’ll definitely want to change these), a StandardStyles.xaml resource dictionary that includes a lot of helpful styles such as buttons for the AppBar (a special type of menu in Windows 8 store apps), an App.xaml file, and the app’s main page which is named MainPage.xaml. It also adds a Package.appxmanifest that is used to define functionality that your app requires, app information used in the store, plus more. The App.xaml, App.xaml.cs and StandardStyles.xaml Files The App.xaml file handles loading a resource dictionary named StandardStyles.xaml which has several key styles used throughout the application: <Application x:Class="BlankApp.App" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="using:BlankApp"> <Application.Resources> <ResourceDictionary> <ResourceDictionary.MergedDictionaries>  <ResourceDictionary Source="Common/StandardStyles.xaml"/> </ResourceDictionary.MergedDictionaries> </ResourceDictionary> </Application.Resources> </Application> StandardStyles.xaml has style definitions for different text styles and AppBar buttons. If you scroll down toward the middle of the file you’ll see that many AppBar button styles are included such as one for an edit icon. Button styles like this can be used to quickly and easily add icons/buttons into your application without having to be an expert in design. <Style x:Key="EditAppBarButtonStyle" TargetType="ButtonBase" BasedOn="{StaticResource AppBarButtonStyle}"> <Setter Property="AutomationProperties.AutomationId" Value="EditAppBarButton"/> <Setter Property="AutomationProperties.Name" Value="Edit"/> <Setter Property="Content" Value=""/> </Style> Switching over to App.xaml.cs, it includes some code to help get you started. An OnLaunched() method is added to handle creating a Frame that child pages such as MainPage.xaml can be loaded into. The Frame has the same overall purpose as the one found in WPF and Silverlight applications - it’s used to navigate between pages in an application. /// <summary> /// Invoked when the application is launched normally by the end user. Other entry points /// will be used when the application is launched to open a specific file, to display /// search results, and so forth. /// </summary> /// <param name="args">Details about the launch request and process.</param> protected override void OnLaunched(LaunchActivatedEventArgs args) { Frame rootFrame = Window.Current.Content as Frame; // Do not repeat app initialization when the Window already has content, // just ensure that the window is active if (rootFrame == null) { // Create a Frame to act as the navigation context and navigate to the first page rootFrame = new Frame(); if (args.PreviousExecutionState == ApplicationExecutionState.Terminated) { //TODO: Load state from previously suspended application } // Place the frame in the current Window Window.Current.Content = rootFrame; } if (rootFrame.Content == null) { // When the navigation stack isn't restored navigate to the first page, // configuring the new page by passing required information as a navigation // parameter if (!rootFrame.Navigate(typeof(MainPage), args.Arguments)) { throw new Exception("Failed to create initial page"); } } // Ensure the current window is active Window.Current.Activate(); } Notice that in addition to creating a Frame the code also checks to see if the app was previously terminated so that you can load any state/data that the user may need when the app is launched again. If you’re new to the lifecycle of Windows 8 store apps the following image shows how an app can be running, suspended, and terminated. If the user switches from an app they’re running the app will be suspended in memory. The app may stay suspended or may be terminated depending on how much memory the OS thinks it needs so it’s important to save state in case the application is ultimately terminated and has to be started fresh. Although I won’t cover saving application state here, additional information can be found at http://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh465099.aspx. Another method in App.xaml.cs named OnSuspending() is also included in App.xaml.cs that can be used to store state as the user switches to another application: /// <summary> /// Invoked when application execution is being suspended. Application state is saved /// without knowing whether the application will be terminated or resumed with the contents /// of memory still intact. /// </summary> /// <param name="sender">The source of the suspend request.</param> /// <param name="e">Details about the suspend request.</param> private void OnSuspending(object sender, SuspendingEventArgs e) { var deferral = e.SuspendingOperation.GetDeferral(); //TODO: Save application state and stop any background activity deferral.Complete(); } The MainPage.xaml and MainPage.xaml.cs Files The Blank App project adds a file named MainPage.xaml that acts as the initial screen for the application. It doesn’t include anything aside from an empty <Grid> XAML element in it. The code-behind class named MainPage.xaml.cs includes a constructor as well as a method named OnNavigatedTo() that is called once the page is displayed in the frame. /// <summary> /// An empty page that can be used on its own or navigated to within a Frame. /// </summary> public sealed partial class MainPage : Page { public MainPage() { this.InitializeComponent(); } /// <summary> /// Invoked when this page is about to be displayed in a Frame. /// </summary> /// <param name="e">Event data that describes how this page was reached. The Parameter /// property is typically used to configure the page.</param> protected override void OnNavigatedTo(NavigationEventArgs e) { } } If you’re experienced with XAML you can switch to Design mode and start dragging and dropping XAML controls from the ToolBox in Visual Studio. If you prefer to type XAML you can do that as well in the XAML editor or while in split mode. Many of the controls available in WPF and Silverlight are included such as Canvas, Grid, StackPanel, and Border for layout. Standard input controls are also included such as TextBox, CheckBox, PasswordBox, RadioButton, ComboBox, ListBox, and more. MediaElement is available for rendering video or playing audio files. Some of the “common” XAML controls included out of the box are shown next: Although XAML/C# Windows 8 store apps don’t include all of the functionality available in Silverlight 5, the core functionality required to build store apps is there with additional functionality available in open source projects such as Callisto (started by Microsoft’s Tim Heuer), Q42.WinRT, and others. Standard XAML data binding can be used to bind C# objects to controls, converters can be used to manipulate data during the data binding process, and custom styles and templates can be applied to controls to modify them. Although Visual Studio 2012 doesn’t support visually creating styles or templates, Expression Blend 5 handles that very well. To get started building the initial screen of a Windows 8 app you can start adding controls as mentioned earlier. Simply place them inside of the <Grid> element that’s included. You can arrange controls in a stacked manner using the StackPanel control, add a border around controls using the Border control, arrange controls in columns and rows using the Grid control, or absolutely position controls using the Canvas control. One of the controls that may be new to you is the AppBar. It can be used to add menu/toolbar functionality into a store app and keep the app clean and focused. You can place an AppBar at the top or bottom of the screen. A user on a touch device can swipe up to display the bottom AppBar or right-click when using a mouse. An example of defining an AppBar that contains an Edit button is shown next. The EditAppBarButtonStyle is available in the StandardStyles.xaml file mentioned earlier. <Page.BottomAppBar> <AppBar x:Name="ApplicationAppBar" Padding="10,0,10,0" AutomationProperties.Name="Bottom App Bar"> <Grid> <StackPanel x:Name="RightPanel" Orientation="Horizontal" Grid.Column="1" HorizontalAlignment="Right"> <Button x:Name="Edit" Style="{StaticResource EditAppBarButtonStyle}" Tag="Edit" /> </StackPanel> </Grid> </AppBar> </Page.BottomAppBar> Like standard XAML controls, the <Button> control in the AppBar can be wired to an event handler method in the MainPage.Xaml.cs file or even bound to a ViewModel object using “commanding” if your app follows the Model-View-ViewModel (MVVM) pattern (check out the MVVM Light package available through NuGet if you’re using MVVM with Windows 8 store apps). The AppBar can be used to navigate to different screens, show and hide controls, display dialogs, show settings screens, and more. The Package.appxmanifest File The Package.appxmanifest file contains configuration details about your Windows 8 store app. By double-clicking it in Visual Studio you can define the splash screen image, small and wide logo images used for tiles on the start screen, orientation information, and more. You can also define what capabilities the app has such as if it uses the Internet, supports geolocation functionality, requires a microphone or webcam, etc. App declarations such as background processes, file picker functionality, and sharing can also be defined Finally, information about how the app is packaged for deployment to the store can also be defined. Summary If you already have some experience working with XAML technologies you’ll find that getting started building Windows 8 applications is pretty straightforward. Many of the controls available in Silverlight and WPF are available making it easy to get started without having to relearn a lot of new technologies. In the next post in this series I’ll discuss additional features that can be used in your Windows 8 store apps.

Read the article

JMS Step 6 - How to Set Up an AQ JMS (Advanced Queueing JMS) for SOA Purposes

- by John-Brown.Evans

JMS Step 6 - How to Set Up an AQ JMS (Advanced Queueing JMS) for SOA Purposes .jblist{list-style-type:disc;margin:0;padding:0;padding-left:0pt;margin-left:36pt} ol{margin:0;padding:0} .c17_6{vertical-align:top;width:468pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c5_6{vertical-align:top;border-style:solid;border-color:#000000;border-width:1pt;padding:0pt 5pt 0pt 5pt} .c6_6{vertical-align:top;width:156pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c15_6{background-color:#ffffff} .c10_6{color:#1155cc;text-decoration:underline} .c1_6{text-align:center;direction:ltr} .c0_6{line-height:1.0;direction:ltr} .c16_6{color:#666666;font-size:12pt} .c18_6{color:inherit;text-decoration:inherit} .c8_6{background-color:#f3f3f3} .c2_6{direction:ltr} .c14_6{font-size:8pt} .c11_6{font-size:10pt} .c7_6{font-weight:bold} .c12_6{height:0pt} .c3_6{height:11pt} .c13_6{border-collapse:collapse} .c4_6{font-family:"Courier New"} .c9_6{font-style:italic} .title{padding-top:24pt;line-height:1.15;text-align:left;color:#000000;font-size:36pt;font-family:"Arial";font-weight:bold;padding-bottom:6pt} .subtitle{padding-top:18pt;line-height:1.15;text-align:left;color:#666666;font-style:italic;font-size:24pt;font-family:"Georgia";padding-bottom:4pt} li{color:#000000;font-size:10pt;font-family:"Arial"} p{color:#000000;font-size:10pt;margin:0;font-family:"Arial"} h1{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:24pt;font-family:"Arial";font-weight:normal} h2{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:18pt;font-family:"Arial";font-weight:normal} h3{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:14pt;font-family:"Arial";font-weight:normal} h4{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:12pt;font-family:"Arial";font-weight:normal} h5{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:11pt;font-family:"Arial";font-weight:normal} h6{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:10pt;font-family:"Arial";font-weight:normal} This post continues the series of JMS articles which demonstrate how to use JMS queues in a SOA context. The previous posts were: JMS Step 1 - How to Create a Simple JMS Queue in Weblogic Server 11g JMS Step 2 - Using the QueueSend.java Sample Program to Send a Message to a JMS Queue JMS Step 3 - Using the QueueReceive.java Sample Program to Read a Message from a JMS Queue JMS Step 4 - How to Create an 11g BPEL Process Which Writes a Message Based on an XML Schema to a JMS Queue JMS Step 5 - How to Create an 11g BPEL Process Which Reads a Message Based on an XML Schema from a JMS Queue This example leads you through the creation of an Oracle database Advanced Queue and the related WebLogic server objects in order to use AQ JMS in connection with a SOA composite. If you have not already done so, I recommend you look at the previous posts in this series, as they include steps which this example builds upon. The following examples will demonstrate how to write and read from the queue from a SOA process. 1. Recap and Prerequisites In the previous examples, we created a JMS Queue, a Connection Factory and a Connection Pool in the WebLogic Server Console. Then we wrote and deployed BPEL composites, which enqueued and dequeued a simple XML payload. AQ JMS allows you to interoperate with database Advanced Queueing via JMS in WebLogic server and therefore take advantage of database features, while maintaining compliance with the JMS architecture. AQ JMS uses the WebLogic JMS Foreign Server framework. A full description of this functionality can be found in the following Oracle documentation Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server 11g Release 1 (10.3.6) Part Number E13738-06 7. Interoperating with Oracle AQ JMS http://docs.oracle.com/cd/E23943_01/web.1111/e13738/aq_jms.htm#CJACBCEJ For easier reference, this sample will use the same names for the objects as in the above document, except for the name of the database user, as it is possible that this user already exists in your database. We will create the following objects Database Objects Name Type AQJMSUSER Database User MyQueueTable Advanced Queue (AQ) Table UserQueue Advanced Queue WebLogic Server Objects Object Name Type JNDI Name aqjmsuserDataSource Data Source jdbc/aqjmsuserDataSource AqJmsModule JMS System Module AqJmsForeignServer JMS Foreign Server AqJmsForeignServerConnectionFactory JMS Foreign Server Connection Factory AqJmsForeignServerConnectionFactory AqJmsForeignDestination AQ JMS Foreign Destination queue/USERQUEUE eis/aqjms/UserQueue Connection Pool eis/aqjms/UserQueue 2. Create a Database User and Advanced Queue The following steps can be executed in the database client of your choice, e.g. JDeveloper or SQL Developer. The examples below use SQL*Plus. Log in to the database as a DBA user, for example SYSTEM or SYS. Create the AQJMSUSER user and grant privileges to enable the user to create AQ objects. Create Database User and Grant AQ Privileges sqlplus system/password as SYSDBA GRANT connect, resource TO aqjmsuser IDENTIFIED BY aqjmsuser; GRANT aq_user_role TO aqjmsuser; GRANT execute ON sys.dbms_aqadm TO aqjmsuser; GRANT execute ON sys.dbms_aq TO aqjmsuser; GRANT execute ON sys.dbms_aqin TO aqjmsuser; GRANT execute ON sys.dbms_aqjms TO aqjmsuser; Create the Queue Table and Advanced Queue and Start the AQ The following commands are executed as the aqjmsuser database user. Create the Queue Table connect aqjmsuser/aqjmsuser; BEGIN dbms_aqadm.create_queue_table ( queue_table = 'myQueueTable', queue_payload_type = 'sys.aq$_jms_text_message', multiple_consumers = false ); END; / Create the AQ BEGIN dbms_aqadm.create_queue ( queue_name = 'userQueue', queue_table = 'myQueueTable' ); END; / Start the AQ BEGIN dbms_aqadm.start_queue ( queue_name = 'userQueue'); END; / The above commands can be executed in a single PL/SQL block, but are shown as separate blocks in this example for ease of reference. You can verify the queue by executing the SQL command SELECT object_name, object_type FROM user_objects; which should display the following objects: OBJECT_NAME OBJECT_TYPE ------------------------------ ------------------- SYS_C0056513 INDEX SYS_LOB0000170822C00041$$ LOB SYS_LOB0000170822C00040$$ LOB SYS_LOB0000170822C00037$$ LOB AQ$_MYQUEUETABLE_T INDEX AQ$_MYQUEUETABLE_I INDEX AQ$_MYQUEUETABLE_E QUEUE AQ$_MYQUEUETABLE_F VIEW AQ$MYQUEUETABLE VIEW MYQUEUETABLE TABLE USERQUEUE QUEUE Similarly, you can view the objects in JDeveloper via a Database Connection to the AQJMSUSER. 3. Configure WebLogic Server and Add JMS Objects All these steps are executed from the WebLogic Server Administration Console. Log in as the webLogic user. Configure a WebLogic Data Source The data source is required for the database connection to the AQ created above. Navigate to domain > Services > Data Sources and press New then Generic Data Source. Use the values:Name: aqjmsuserDataSource JNDI Name: jdbc/aqjmsuserDataSource Database type: Oracle Database Driver: *Oracle’ Driver (Thin XA) for Instance connections; Versions:9.0.1 and later Connection Properties: Enter the connection information to the database containing the AQ created above and enter aqjmsuser for the User Name and Password. Press Test Configuration to verify the connection details and press Next. Target the data source to the soa server. The data source will be displayed in the list. It is a good idea to test the data source at this stage. Click on aqjmsuserDataSource, select Monitoring > Testing > soa_server1 and press Test Data Source. The result is displayed at the top of the page. Configure a JMS System Module The JMS system module is required to host the JMS foreign server for AQ resources. Navigate to Services > Messaging > JMS Modules and select New. Use the values: Name: AqJmsModule (Leave Descriptor File Name and Location in Domain empty.) Target: soa_server1 Click Finish. The other resources will be created in separate steps. The module will be displayed in the list. Configure a JMS Foreign Server A foreign server is required in order to reference a 3rd-party JMS provider, in this case the database AQ, within a local WebLogic server JNDI tree. Navigate to Services > Messaging > JMS Modules and select (click on) AqJmsModule to configure it. Under Summary of Resources, select New then Foreign Server. Name: AqJmsForeignServer Targets: The foreign server is targeted automatically to soa_server1, based on the JMS module’s target. Press Finish to create the foreign server. The foreign server resource will be listed in the Summary of Resources for the AqJmsModule, but needs additional configuration steps. Click on AqJmsForeignServer and select Configuration > General to complete the configuration: JNDI Initial Context Factory: oracle.jms.AQjmsInitialContextFactory JNDI Connection URL: <empty> JNDI Properties Credential:<empty> Confirm JNDI Properties Credential: <empty> JNDI Properties: datasource=jdbc/aqjmsuserDataSource This is an important property. It is the JNDI name of the data source created above, which points to the AQ schema in the database and must be entered as a name=value pair, as in this example, e.g. datasource=jdbc/aqjmsuserDataSource, including the “datasource=” property name. Default Targeting Enabled: Leave this value checked. Press Save to save the configuration. At this point it is a good idea to verify that the data source was written correctly to the config file. In a terminal window, navigate to $MIDDLEWARE_HOME/user_projects/domains/soa_domain/config/jms and open the file aqjmsmodule-jms.xml . The foreign server configuration should contain the datasource name-value pair, as follows: <foreign-server name="AqJmsForeignServer"> <default-targeting-enabled>true</default-targeting-enabled> <initial-context-factory>oracle.jms.AQjmsInitialContextFactory</initial-context-factory> <jndi-property> <key> datasource </key> <value> jdbc/aqjmsuserDataSource </value> </jndi-property> </foreign-server> </weblogic-jms> Configure a JMS Foreign Server Connection Factory When creating the foreign server connection factory, you enter local and remote JNDI names. The name of the connection factory itself and the local JNDI name are arbitrary, but the remote JNDI name must match a specific format, depending on the type of queue or topic to be accessed in the database. This is very important and if the incorrect value is used, the connection to the queue will not be established and the error messages you get will not immediately reflect the cause of the error. The formats required (Remote JNDI names for AQ JMS Connection Factories) are described in the section Configure AQ Destinations of the Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server document mentioned earlier. In this example, the remote JNDI name used is XAQueueConnectionFactory because it matches the AQ and data source created earlier, i.e. thin with AQ. Navigate to JMS Modules > AqJmsModule > AqJmsForeignServer > Connection Factories then New.Name: AqJmsForeignServerConnectionFactory Local JNDI Name: AqJmsForeignServerConnectionFactory Note: this local JNDI name is the JNDI name which your client application, e.g. a later BPEL process, will use to access this connection factory. Remote JNDI Name: XAQueueConnectionFactory Press OK to save the configuration. Configure an AQ JMS Foreign Server Destination A foreign server destination maps the JNDI name on the foreign JNDI provider to the respective local JNDI name, allowing the foreign JNDI name to be accessed via the local server. As with the foreign server connection factory, the local JNDI name is arbitrary (but must be unique), but the remote JNDI name must conform to a specific format defined in the section Configure AQ Destinations of the Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server document mentioned earlier. In our example, the remote JNDI name is Queues/USERQUEUE , because it references a queue (as opposed to a topic) with the name USERQUEUE. We will name the local JNDI name queue/USERQUEUE, which is a little confusing (note the missing “s” in “queue), but conforms better to the JNDI nomenclature in our SOA server and also allows us to differentiate between the local and remote names for demonstration purposes. Navigate to JMS Modules > AqJmsModule > AqJmsForeignServer > Destinations and select New.Name: AqJmsForeignDestination Local JNDI Name: queue/USERQUEUE Remote JNDI Name:Queues/USERQUEUE After saving the foreign destination configuration, this completes the JMS part of the configuration. We still need to configure the JMS adapter in order to be able to access the queue from a BPEL processt. 4. Create a JMS Adapter Connection Pool in Weblogic Server Create the Connection Pool Access to the AQ JMS queue from a BPEL or other SOA process in our example is done via a JMS adapter. To enable this, the JmsAdapter in WebLogic server needs to be configured to have a connection pool which points to the local connection factory JNDI name which was created earlier. Navigate to Deployments > Next and select (click on) the JmsAdapter. Select Configuration > Outbound Connection Pools and New. Check the radio button for oracle.tip.adapter.jms.IJmsConnectionFactory and press Next. JNDI Name: eis/aqjms/UserQueue Press Finish Expand oracle.tip.adapter.jms.IJmsConnectionFactory and click on eis/aqjms/UserQueue to configure it. The ConnectionFactoryLocation must point to the foreign server’s local connection factory name created earlier. In our example, this is AqJmsForeignServerConnectionFactory . As a reminder, this connection factory is located under JMS Modules > AqJmsModule > AqJmsForeignServer > Connection Factories and the value needed here is under Local JNDI Name. Enter AqJmsForeignServerConnectionFactory into the Property Value field for ConnectionFactoryLocation. You must then press Return/Enter then Save for the value to be accepted. If your WebLogic server is running in Development mode, you should see the message that the changes have been activated and the deployment plan successfully updated. If not, then you will manually need to activate the changes in the WebLogic server console.Although the changes have been activated, the JmsAdapter needs to be redeployed in order for the changes to become effective. This should be confirmed by the message Remember to update your deployment to reflect the new plan when you are finished with your changes. Redeploy the JmsAdapter Navigate back to the Deployments screen, either by selecting it in the left-hand navigation tree or by selecting the “Summary of Deployments” link in the breadcrumbs list at the top of the screen. Then select the checkbox next to JmsAdapter and press the Update button. On the Update Application Assistant page, select “Redeploy this application using the following deployment files” and press Finish. After a few seconds you should get the message that the selected deployments were updated. The JMS adapter configuration is complete and it can now be used to access the AQ JMS queue. You can verify that the JNDI name was created correctly, by navigating to Environment > Servers > soa_server1 and View JNDI Tree. Then scroll down in the JNDI Tree Structure to eis and select aqjms. This concludes the sample. In the following post, I will show you how to create a BPEL process which sends a message to this advanced queue via JMS. Best regards John-Brown Evans Oracle Technology Proactive Support Delivery

Read the article

Visual Studio 2010 Extension Manager (and the new VS 2010 PowerCommands Extension)

- by ScottGu

This is the twenty-third in a series of blog posts I’m doing on the VS 2010 and .NET 4 release. Today’s blog post covers some of the extensibility improvements made in VS 2010 – as well as a cool new "PowerCommands for Visual Studio 2010” extension that Microsoft just released (and which can be downloaded and used for free). [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Extensibility in VS 2010 VS 2010 provides a much richer extensibility model than previous releases. Anyone can build extensions that add, customize, and light-up the Visual Studio 2010 IDE, Code Editors, Project System and associated Designers. VS 2010 Extensions can be created using the new MEF (Managed Extensibility Framework) which is built-into .NET 4. You can learn more about how to create VS 2010 extensions from this this blog post from the Visual Studio Team Blog. VS 2010 Extension Manager Developers building extensions can distribute them on their own (via their own web-sites or by selling them). Visual Studio 2010 also now includes a built-in “Extension Manager” within the IDE that makes it much easier for developers to find, download, and enable extensions online. You can launch the “Extension Manager” by selecting the Tools->Extension Manager menu option: This loads an “Extension Manager” dialog which accesses an “online gallery” at Microsoft, and then populates a list of available extensions that you can optionally download and enable within your copy of Visual Studio: There are already hundreds of cool extensions populated within the online gallery. You can browse them by category (use the tree-view on the top-left to filter them). Clicking “download” on any of the extensions will download, install, and enable it. PowerCommands for Visual Studio 2010 This weekend Microsoft released the free PowerCommands for Visual Studio 2010 extension to the online gallery. You can learn more about it here, and download and install it via the “Extension Manager” above (search for PowerCommands to find it). The PowerCommands download adds dozens of useful commands to Visual Studio 2010. Below is a screen-shot of just a few of the useful commands that it adds to the Solution Explorer context menus: Below is a list of all the commands included with this weekend’s PowerCommands for Visual Studio 2010 release: Enable/Disable PowerCommands in Options dialog This feature allows you to select which commands to enable in the Visual Studio IDE. Point to the Tools menu, then click Options. Expand the PowerCommands options, then click Commands. Check the commands you would like to enable. Note: All power commands are initially defaulted Enabled. Format document on save / Remove and Sort Usings on save The Format document on save option formats the tabs, spaces, and so on of the document being saved. It is equivalent to pointing to the Edit menu, clicking Advanced, and then clicking Format Document. The Remove and sort usings option removes unused using statements and sorts the remaining using statements in the document being saved. Note: The Remove and sort usings option is only available for C# documents. Format document on save and Remove and sort usings both are initially defaulted OFF. Clear All Panes This command clears all output panes. It can be executed from the button on the toolbar of the Output window. Copy Path This command copies the full path of the currently selected item to the clipboard. It can be executed by right-clicking one of these nodes in the Solution Explorer: The solution node; A project node; Any project item node; Any folder. Email CodeSnippet To email the lines of text you select in the code editor, right-click anywhere in the editor and then click Email CodeSnippet. Insert Guid Attribute This command adds a Guid attribute to a selected class. From the code editor, right-click anywhere within the class definition, then click Insert Guid Attribute. Show All Files This command shows the hidden files in all projects displayed in the Solution Explorer when the solution node is selected. It enhances the Show All Files button, which normally shows only the hidden files in the selected project node. Undo Close This command reopens a closed document , returning the cursor to its last position. To reopen the most recently closed document, point to the Edit menu, then click Undo Close. Alternately, you can use the CtrlShiftZ shortcut. To reopen any other recently closed document, point to the View menu, click Other Windows, and then click Undo Close Window. The Undo Close window appears, typically next to the Output window. Double-click any document in the list to reopen it. Collapse Projects This command collapses a project or projects in the Solution Explorer starting from the root selected node. Collapsing a project can increase the readability of the solution. This command can be executed from three different places: solution, solution folders and project nodes respectively. Copy Class This command copies a selected class entire content to the clipboard, renaming the class. This command is normally followed by a Paste Class command, which renames the class to avoid a compilation error. It can be executed from a single project item or a project item with dependent sub items. Paste Class This command pastes a class entire content from the clipboard, renaming the class to avoid a compilation error. This command is normally preceded by a Copy Class command. It can be executed from a project or folder node. Copy References This command copies a reference or set of references to the clipboard. It can be executed from the references node, a single reference node or set of reference nodes. Paste References This command pastes a reference or set of references from the clipboard. It can be executed from different places depending on the type of project. For CSharp projects it can be executed from the references node. For Visual Basic and Website projects it can be executed from the project node. Copy As Project Reference This command copies a project as a project reference to the clipboard. It can be executed from a project node. Edit Project File This command opens the MSBuild project file for a selected project inside Visual Studio. It combines the existing Unload Project and Edit Project commands. Open Containing Folder This command opens a Windows Explorer window pointing to the physical path of a selected item. It can be executed from a project item node Open Command Prompt This command opens a Visual Studio command prompt pointing to the physical path of a selected item. It can be executed from four different places: solution, project, folder and project item nodes respectively. Unload Projects This command unloads all projects in a solution. This can be useful in MSBuild scenarios when multiple projects are being edited. This command can be executed from the solution node. Reload Projects This command reloads all unloaded projects in a solution. It can be executed from the solution node. Remove and Sort Usings This command removes and sort using statements for all classes given a project. It is useful, for example, in removing or organizing the using statements generated by a wizard. This command can be executed from a solution node or a single project node. Extract Constant This command creates a constant definition statement for a selected text. Extracting a constant effectively names a literal value, which can improve readability. This command can be executed from the code editor by right-clicking selected text. Clear Recent File List This command clears the Visual Studio recent file list. The Clear Recent File List command brings up a Clear File dialog which allows any or all recent files to be selected. Clear Recent Project List This command clears the Visual Studio recent project list. The Clear Recent Project List command brings up a Clear File dialog which allows any or all recent projects to be selected. Transform Templates This command executes a custom tool with associated text templates items. It can be executed from a DSL project node or a DSL folder node. Close All This command closes all documents. It can be executed from a document tab. How to temporarily disable extensions Extensions provide a great way to make Visual Studio even more powerful, and can help improve your overall productivity. One thing to keep in mind, though, is that extensions run within the Visual Studio process (DevEnv.exe) and so a bug within an extension can impact both the stability and performance of Visual Studio. If you ever run into a situation where things seem slower than they should, or if you crash repeatedly, please temporarily disable any installed extensions and see if that fixes the problem. You can do this for extensions that were installed via the online gallery by re-running the extension manager (using the Tools->Extension Manager menu option) and by selecting the “Installed Extensions” node on the top-left of the dialog – and then by clicking “Disable” on any of the extensions within your installed list: Hope this helps, Scott

Read the article

What You Need to Know About Windows 8.1

- by Chris Hoffman

Windows 8.1 is available to everyone starting today, October 19. The latest version of Windows improves on Windows 8 in every way. It’s a big upgrade, whether you use the desktop or new touch-optimized interface. The latest version of Windows has been dubbed “an apology” by some — it’s definitely more at home on a desktop PC than Windows 8 was. However, it also offers a more fleshed out and mature tablet experience. How to Get Windows 8.1 For Windows 8 users, Windows 8.1 is completely free. It will be available as a download from the Windows Store — that’s the “Store” app in the Modern, tiled interface. Assuming upgrading to the final version will be just like upgrading to the preview version, you’ll likely see a “Get Windows 8.1″ pop-up that will take you to the Windows Store and guide you through the download process. You’ll also be able to download ISO images of Windows 8.1, so can perform a clean install to upgrade. On any new computer, you can just install Windows 8.1 without going through Windows 8. New computers will start to ship with Windows 8.1 and boxed copies of Windows 8 will be replaced by boxed copies of Windows 8.1. If you’re using Windows 7 or a previous version of Windows, the update won’t be free. Getting Windows 8.1 will cost you the same amount as a full copy of Windows 8 — $120 for the standard version. If you’re an average Windows 7 user, you’re likely better off waiting until you buy a new PC with Windows 8.1 included rather than spend this amount of money to upgrade. Improvements for Desktop Users Some have dubbed Windows 8.1 “an apology” from Microsoft, although you certainly won’t see Microsoft referring to it this way. Either way, Steven Sinofsky, who presided over Windows 8′s development, left the company shortly after Windows 8 was released. Coincidentally, Windows 8.1 contains many features that Steven Sinofsky and Microsoft refused to implement. Windows 8.1 offers the following big improvements for desktop users: Boot to Desktop: You can now log in directly to the desktop, skipping the tiled interface entirely. Disable Top-Left and Top-Right Hot Corners: The app switcher and charms bar won’t appear when you move your mouse to the top-left or top-right corners of the screen if you enable this option. No more intrusions into the desktop. The Start Button Returns: Windows 8.1 brings back an always-present Start button on the desktop taskbar, dramatically improving discoverability for new Windows 8 users and providing a bigger mouse target for remote desktops and virtual machines. Crucially, the Start menu isn’t back — clicking this button will open the full-screen Modern interface. Start menu replacements will continue to function on Windows 8.1, offering more traditional Start menus. Show All Apps By Default: Luckily, you can hide the Start screen and its tiles almost entirely. Windows 8.1 can be configured to show a full-screen list of all your installed apps when you click the Start button, with desktop apps prioritized. The only real difference is that the Start menu is now a full-screen interface. Shut Down or Restart From Start Button: You can now right-click the Start button to access Shut down, Restart, and other power options in just as many clicks as you could on Windows 7. Shared Start Screen and Desktop Backgrounds; Windows 8 limited you to just a few Steven Sinofsky-approved background images for your Start screen, but Windows 8.1 allows you to use your desktop background on the Start screen. This can make the transition between the Start screen and desktop much less jarring. The tiles or shortcuts appear to be floating above the desktop rather than off in their own separate universe. Unified Search: Unified search is back, so you can start typing and search your programs, settings, and files all at once — no more awkwardly clicking between different categories when trying to open a Control Panel screen or search for a file. These all add up to a big improvement when using Windows 8.1 on the desktop. Microsoft is being much more flexible — the Start menu is full screen, but Microsoft has relented on so many other things and you’d never have to see a tile if you didn’t want to. For more information, read our guide to optimizing Windows 8.1 for a desktop PC. These are just the improvements specifically for desktop users. Windows 8.1 includes other useful features for everyone, such as deep SkyDrive integration that allows you to store your files in the cloud without installing any additional sync programs. Improvements for Touch Users If you have a Windows 8 or Windows RT tablet or another touch-based device you use the interface formerly known as Metro on, you’ll see many other noticeable improvements. Windows 8′s new interface was half-baked when it launched, but it’s now much more capable and mature. App Updates: Windows 8′s included apps were extremely limited in many cases. For example, Internet Explorer 10 could only display ten tabs at a time and the Mail app was a barren experience devoid of features. In Windows 8.1, some apps — like Xbox Music — have been redesigned from scratch, Internet Explorer allows you to display a tab bar on-screen all the time, while apps like Mail have accumulated quite a few useful features. The Windows Store app has been entirely redesigned and is less awkward to browse. Snap Improvements: Windows 8′s Snap feature was a toy, allowing you to snap one app to a small sidebar at one side of your screen while another app consumed most of your screen. Windows 8.1 allows you to snap two apps side-by-side, seeing each app’s full interface at once. On larger displays, you can even snap three or four apps at once. Windows 8′s ability to use multiple apps at once on a tablet is compelling and unmatched by iPads and Android tablets. You can also snap two of the same apps side-by-side — to view two web pages at once, for example. More Comprehensive PC Settings: Windows 8.1 offers a more comprehensive PC settings app, allowing you to change most system settings in a touch-optimized interface. You shouldn’t have to use the desktop Control Panel on a tablet anymore — or at least not as often. Touch-Optimized File Browsing: Microsoft’s SkyDrive app allows you to browse files on your local PC, finally offering a built-in, touch-optimized way to manage files without using the desktop. Help & Tips: Windows 8.1 includes a Help+Tips app that will help guide new users through its new interface, something Microsoft stubbornly refused to add during development. There’s still no “Modern” version of Microsoft Office apps (aside from OneNote), so you’ll still have to head to use desktop Office apps on tablets. It’s not perfect, but the Modern interface doesn’t feel anywhere near as immature anymore. Read our in-depth look at the ways Microsoft’s Modern interface, formerly known as Metro, is improved in Windows 8.1 for more information. In summary, Windows 8.1 is what Windows 8 should have been. All of these improvements are on top of the many great desktop features, security improvements, and all-around battery life and performance optimizations that appeared in Windows 8. If you’re still using Windows 7 and are happy with it, there’s probably no reason to race out and buy a copy of Windows 8.1 at the rather high price of $120. But, if you’re using Windows 8, it’s a big upgrade no matter what you’re doing. If you buy a new PC and it comes with Windows 8.1, you’re getting a much more flexible and comfortable experience. If you’re holding off on buying a new computer because you don’t want Windows 8, give Windows 8.1 a try — yes, it’s different, but Microsoft has compromised on the desktop while making a lot of improvements to the new interface. You just might find that Windows 8.1 is now a worthwhile upgrade, even if you only want to use the desktop.

Read the article

December release of Microsoft All-In-One Code Framework is available now.

- by Jialiang

The code samples in Microsoft All-In-One Code Framework are updated on 2010-12-13. Download address: http://1code.codeplex.com/releases/view/57459#DownloadId=185534 Updated code sample index categorized by technologies: http://1code.codeplex.com/wikipage?title=All-In-One%20Code%20Framework%20Sample%20Catalog (it also allows you to download individual code samples instead of the entire All-In-One Code Framework sample package.) If it’s the first time that you hear about Microsoft All-In-One Code Framework, please watch the introduction video on YouTube http://www.youtube.com/watch?v=cO5Li3APU58, or read the introduction on our homepage http://1code.codeplex.com/, and this Port25 article http://port25.technet.com/archive/2010/01/18/the-all-in-one-code-framework.aspx. -------------- New ASP.NET Code Samples VBASPNETAJAXWebChat and CSASPNETAJAXWebChat Most of you have some experience in chatting with friends on the web. So you may want to know how to make a web chat application, it seems to be quite complicated. But ASP.NET gives you the power to buiild a chat room easily. In this code sample, we will construct our own web chat room with the amazing AJAX feature. The principle is simple relatively. As we all know, a base chat application need 4 base controls: one List control to show the chat room members, one List control to show the message list, one TextBox control to input messages and one button to send message. User inputs his message in the textbox first and then presses Send button, it will send the message to the server. The message list will update every 2 seconds to get the newest message list in the chat room from the server. We need to know, it is hard for us to make an AJAX web chat application like a windows form application because we cannot keep the connection after one web request ended. So a lot of events which communicates between client side and server side cannot be realized. The common workaround is to make web requests in every some seconds to check whether the server side has been updated. But another technique called COMET makes it possible. But it is different with AJAX and will not be talked in details in this KB. For more details about COMET, we can get some clues from the Reference. CSASPNETCurrentOnlineUserList and VBASPNETCurrentOnlineUserList This sample demos a system that needs to display a list of current online users' information. As a matter of fact, Membership.GetNumberOfUsersOnline Method can get the number of online users and there is a convenient approach to check whether the user is online by using Membership.GetUser(string userName).IsOnline property,however many asp.net projects are not using membership.So in this case,the sample shows how to display a list of current online users' information without using membership provider. It is not difficult to check whether the user is online by using session.Many projects tend to be used “Session_End” event to mark a user as “Offline”,however ,it may not be a good idea,because it can’t detect the user status accurately. In addition, "Session_End" event is only available in the "InProc" session mode. If you are storing session states in the State Server or SQL Server, "Session_End" event will never fire. To handle this issue, we need to save the user online status to a global DataTable or DataBase. In the sample application, define a global DataTable to store the information of online users.Use XmlHttpRequest in the pages to update and check user's last active time at intervals and also retrieve information on how many users are still online. The sample project can auto delete offline users' information from a global DataTable by checking users’ last active time. A step-by-step guide illustrating how to display a list of current online users' information without using membership provider: 1. Login page. Let user sign in and add current user’s information to a global datatable while Initialize the global datatable which used to store information of current online users. 2. Current online user list page. Use XmlHttpRequest in this page to update and check user's last active time at intervals and also retrieve information on how many users are still online. 3. If user closes the page without clicking the sign out link button ,the sample project can auto mark the user as offline and delete offline users' information from a global DataTable which used to store information of current online users by checking users’ last active time. Then the current online user list will be like this: CSASPNETIPtoLocation This sample demonstrates how to find the geographical location from an IP address. As we know, it is not hard for us to get the IP address of visitors via Request.ServerVariable property, but it is really difficult for us to know where they come from. To achieve this feature, the sample uses a free third party web service from http://freegeoip.appspot.com/, which returns the information about an IP address we send to the server in the format of XML, JSON or CSV. It makes all things easier. CSASPNETBackgroundWorker Sometimes we do an operation which needs long time to complete. It will stop the response and the page is blank until the operation finished. In this case, we want the operation to run in the background, and in the page, we want to display the progress of the running operation. Therefore, the user can know the operation is running and can know the progress. CSASPNETInheritingFromTreeNode In windows forms TreeView, each tree node has a property called "Tag" which can be used to store a custom object. Many customers want to implement the same tag feature in ASP.NET TreeView. This project creates a custom TreeView control named "CustomTreeView" to achieve this goal. CSASPNETRemoteUploadAndDownload and VBASPNETRemoteUploadAndDownload This code sample was created in response to a code sample request in our new code sample request frunction for customers. The code samples demonstrate uploading files to and downloading files from a remote HTTP or FTP server. In .NET Framework 2.0 and higher versions, there are some lightweight class libraries which support HTTP and FTP protocol transmission. By using these classes, we can achieve this programming requirement. CSASPNETImageEditUpload and VBASPNETImageEditUpload This demo will shows how to insert, edit and update a common image with the type of "jpg", "png", "gif" or "bmp" . We mainly use two different SqlDataSources with the same database to bind to GridView and FormView in order to establish the “cascading” effort. Besides we apply our self-made ImageHanlder to encoding or decoding images of different types, and use context to output the stream of images. We will explicitly assign the binary streams of images through the event of “FormView_ItemInserting” or “Form_ItemUpdating” to synchronize the stream both in what we can see on an aspx page as well as in what’s really stored in the database. WebBrowser Control, Network and other Windows General New Code Samples CSWebBrowserSuppressError and VBWebBrowserSuppressError The sample demonstrates how to make WebBrowser suppress errors, such as script error, navigation error and so on. CSWebBrowserWithProxy and VBWebBrowserWithProxy The sample demonstrates how to make WebBrowser use a proxy server. CSWebDownloadProgress and VBWebDownloadProgress The sample demonstrates how to show progress during the download. It also supplies the features to Start, Pause, Resume and Cancel a download. CppSetDesktopWallpaper, CSSetDesktopWallpaper and VBSetDesktopWallpaper This code sample application allows you select an image, view a preview (resized smaller to fit if necessary), select a display style among Tile, Center, Stretch, Fit (Windows 7 and later) and Fill (Windows 7 and later), and set the image as the Desktop wallpaper. CSWindowsServiceRecoveryProperty and VBWindowsServiceRecoveryProperty CSWindowsServiceRecoveryProperty example demonstrates how to use ChangeServiceConfig2 to configure the service "Recovery" properties in C#. This example operates all the options you can see on the service "Recovery" tab, including setting the "Enable actions for stops with errors" option in Windows Vista and later operating systems. This example also include how to grant the shut down privilege to the process, so that we can configure a special option in the "Recovery" tab - "Restart Computer Options...". New Office Development Code Samples CSOneNoteRibbonAddIn and VBOneNoteRibbonAddIn The code sample demonstrates a OneNote 2010 COM add-in that implements IDTExtensibility2. The add-in also supports customizing the Ribbon by implementing the IRibbonExtensibility interface. It is a skeleton OneNote add-in that developers can extend it to implement more functions. The code sample was requested by a customer in our code sample request service. We expect that this could help developers in the community. New Windows Shell Code Samples CppShellExtPreviewHandler, CSShellExtPreviewHandler and VBShellExtPreviewHandler In the past two months, we released the code samples of Windows Context Menu Handler, Infotip Handler, and Thumbnail Handler. This is the fourth part of the shell extension series: Preview Handler. The code samples demo the C++, C# and VB.NET implementation of a preview handler for a new file type registered with the .recipe extension. Preview handlers are called when an item is selected to show a lightweight, rich, read-only preview of the file's contents in the view's reading pane. This is done without launching the file's associated application. Windows Vista and later operating systems support preview handlers. To be a valid preview handler, several interfaces must be implemented. This includes IPreviewHandler (shobjidl.h); IInitializeWithFile, IInitializeWithStream, or IInitializeWithItem (propsys.h); IObjectWithSite (ocidl.h); and IOleWindow (oleidl.h). There are also optional interfaces, such as IPreviewHandlerVisuals (shobjidl.h), that a preview handler can implement to provide extended support. Windows API Code Pack for Microsoft .NET Framework makes the implementation of these interfaces very easy in .NET. The example preview handler provides previews for .recipe files. The .recipe file type is simply an XML file registered as a unique file name extension. It includes the title of the recipe, its author, difficulty, preparation time, cook time, nutrition information, comments, an embedded preview image, and so on. The preview handler extracts the title, comments, and the embedded image, and display them in a preview window. In response to many customers' request, we added setup projects in every shell extension samples in this release. Those setup projects allow you to deploy the shell extensions to your end users' machines. ---------- Download address: http://1code.codeplex.com/releases/view/57459#DownloadId=185534 Updated code sample index categorized by technologies: http://1code.codeplex.com/wikipage?title=All-In-One%20Code%20Framework%20Sample%20Catalog (it also allows you to download individual code samples instead of the entire All-In-One Code Framework sample package.) If you have any feedback for us, please email: [email protected]. We look forward to your comments.

Read the article

Integrate Bing Search API into ASP.Net application

- by sreejukg

Couple of months back, I wrote an article about how to integrate Bing Search engine (API 2.0) with ASP.Net website. You can refer the article here http://weblogs.asp.net/sreejukg/archive/2012/04/07/integrate-bing-api-for-search-inside-asp-net-web-application.aspx Things are changing rapidly in the tech world and Bing has also changed! The Bing Search API 2.0 will work until August 1, 2012, after that it will not return results. Shocked? Don’t worry the API has moved to Windows Azure market place and available for you to sign up and continue using it and there is a free version available based on your usage. In this article, I am going to explain how you can integrate the new Bing API that is available in the Windows Azure market place with your website. You can access the Windows Azure market place from the below link https://datamarket.azure.com/ There is lot of applications available for you to subscribe and use. Bing is one of them. You can find the new Bing Search API from the below link https://datamarket.azure.com/dataset/5BA839F1-12CE-4CCE-BF57-A49D98D29A44 To get access to Bing Search API, first you need to register an account with Windows Azure market place. Sign in to the Windows Azure market place site using your windows live account. Once you sign in with your windows live account, you need to register to Windows Azure Market place account. From the Windows Azure market place, you will see the sign in button it the top right of the page. Clicking on the sign in button will take you to the Windows live ID authentication page. You can enter a windows live ID here to login. Once logged in you will see the Registration page for the Windows Azure market place as follows. You can agree or disagree for the email address usage by Microsoft. I believe selecting the check box means you will get email about what is happening in Windows Azure market place. Click on continue button once you are done. In the next page, you should accept the terms of use, it is not optional, you must agree to terms and conditions. Scroll down to the page and select the I agree checkbox and click on Register Button. Now you are a registered member of Windows Azure market place. You can subscribe to data applications. In order to use BING API in your application, you must obtain your account Key, in the previous version of Bing you were required an API key, the current version uses Account Key instead. Once you logged in to the Windows Azure market place, you can see “My Account” in the top menu, from the Top menu; go to “My Account” Section. From the My Account section, you can manage your subscriptions and Account Keys. Account Keys will be used by your applications to access the subscriptions from the market place. Click on My Account link, you can see Account Keys in the left menu and then Add an account key or you can use the default Account key available. Creating account key is very simple process. Also you can remove the account keys you create if necessary. The next step is to subscribe to BING Search API. At this moment, Bing Offers 2 APIs for search. The available options are as follows. 1. Bing Search API - https://datamarket.azure.com/dataset/5ba839f1-12ce-4cce-bf57-a49d98d29a44 2. Bing Search API – Web Results only - https://datamarket.azure.com/dataset/8818f55e-2fe5-4ce3-a617-0b8ba8419f65 The difference is that the later will give you only web results where the other you can specify the source type such as image, video, web, news etc. Carefully choose the API based on your application requirements. In this article, I am going to use Web Results Only API, but the steps will be similar to both. Go to the API page https://datamarket.azure.com/dataset/8818f55e-2fe5-4ce3-a617-0b8ba8419f65, you can see the subscription options in the right side. And in the bottom of the page you can see the free option Since I am going to use the free options, just Click the Sign Up link for that. Just select I agree check box and click on the Sign Up button. You will get a recipt pagethat detail your subscription. Now you are ready Bing Search API – Web results. The next step is to integrate the API into your ASP.Net application. Now if you go to the Search API page (as well as in the Receipt page), you can see a .Net C# Class Library link, click on the link, you will get a code file named “BingSearchContainer.cs”. In the following sections I am going to demonstrate the use of Bing Search API from an ASP.Net application. Create an empty ASP.Net web application. In the solution explorer, the application will looks as follows. Now add the downloaded code file (“BingSearchContainer.cs”) to the project. Right click your project in solution explorer, Add -> existing item, then browse to the downloaded location, select the “BingSearchContainer.cs” file and add it to the project. To build the code file you need to add reference to the following library. System.Data.Services.Client You can find the library in the .Net tab, when you select Add -> Reference Try to build your project now; it should build without any errors. Add an ASP.Net page to the project. I have included a text box and a button, then a Grid View to the page. The idea is to Search the text entered and display the results in the gridview. The page will look in the Visual Studio Designer as follows. The markup of the page is as follows. In the button click event handler for the search button, I have used the following code. Now run your project and enter some text in the text box and click the Search button, you will see the results coming from Bing, cool. I entered the text “Microsoft” in the textbox and clicked on the button and I got the following results. Searching Specific Websites If you want to search a particular website, you pass the site url with site:<site url name> and if you have more sites, use pipe (|). e.g. The following search query site:microsoft.com | site:adobe.com design will search the word design and return the results from Microsoft.com and Adobe.com See the sample code that search only Microsoft.com for the text entered for the above sample. var webResults = bingContainer.Web("site:www.Microsoft.com " + txtSearch.Text, null, null, null, null, null, null); Paging the results returned by the API By default the BING API will return 100 results based on your query. The default code file that you downloaded from BING doesn’t include any option for this. You can modify the downloaded code to perform this paging. The BING API supports two parameters $top (for number of results to return) and $skip (for number of records to skip). So if you want 3rd page of results with page size = 10, you need to pass $top = 10 and $skip=20. Open the BingSearchContainer.cs in the editor. You can see the Web method in it as follows. public DataServiceQuery<WebResult> Web(String Query, String Market, String Adult, Double? Latitude, Double? Longitude, String WebFileType, String Options) { In the method signature, I have added two more parameters public DataServiceQuery<WebResult> Web(String Query, String Market, String Adult, Double? Latitude, Double? Longitude, String WebFileType, String Options, int resultCount, int pageNo) { and in the method, you need to pass the parameters to the query variable. query = query.AddQueryOption("$top", resultCount); query = query.AddQueryOption("$skip", (pageNo -1)*resultCount); return query; Note that I didn’t perform any validation, but you need to check conditions such as resultCount and pageCount should be greater than or equal to 1. If the parameters are not valid, the Bing Search API will throw the error. The modified method is as follows. The changes are highlighted. Now see the following code in the SearchPage.aspx.cs file protected void btnSearch_Click(object sender, EventArgs e) { var bingContainer = new Bing.BingSearchContainer(new Uri(https://api.datamarket.azure.com/Bing/SearchWeb/)); // replace this value with your account key var accountKey = "your key"; // the next line configures the bingContainer to use your credentials. bingContainer.Credentials = new NetworkCredential(accountKey, accountKey); var webResults = bingContainer.Web("site:microsoft.com" +txtSearch.Text , null, null, null, null, null, null,3,2); lstResults.DataSource = webResults; lstResults.DataBind(); } The following code will return 3 results starting from second page (by skipping first 3 results). See the result page as follows. Bing provides complete integration to its offerings. When you develop search based applications, you can use the power of Bing to perform the search. Integrating Bing Search API to ASP.Net application is a simple process and without investing much time, you can develop a good search based application. Make sure you read the terms of use before designing the application and decide which API usage is suitable for you. Further readings BING API Migration Guide http://go.microsoft.com/fwlink/?LinkID=248077 Bing API FAQ http://go.microsoft.com/fwlink/?LinkID=252146 Bing API Schema Guide http://go.microsoft.com/fwlink/?LinkID=252151

Read the article

MySQL Connect: What to Expect From the Wondrous Land of MySQL Cluster

- by Mat Keep

The MySQL Connect conference is only a couple of weeks away, with MySQL engineers, support teams, consultants and community aces busy putting the final touches to their talks. There will be many exciting new announcements and sharing of best practices at the conference, covering the range of MySQL technologies. MySQL Cluster will a big part of this, so I wanted to share some key sessions for those of you who plan on attending, as well as some resources for those who are not lucky enough to be able to make the trip, but who can't afford to miss the key news. Of course, this is no substitute to actually being there….and the good news is that registration is still open ;-) Roadmap: Whats New in MySQL Cluster Saturday 29th, 1300-1400, in Golden Gate room 5. Bernd Ocklin, director of MySQL Cluster development, and myself will be taking a look at what follows the latest MySQL Cluster 7.2 release. I don't want to give to much away - lets just say its not often you can add powerful new functionality to a product while at the same time making life radically simpler for its users. For those not making it to the Conference, a live webinar repeating the talk is scheduled for Thursday 25th October at 09.00 pacific time. Hold the date, registration will be open for that soon and published to our MySQL Webinars page Best Practices Getting Started with MySQL Cluster, Hands-On Lab Saturday 29th, 1600-1700, in Plaza Room A. Santo Leto, one of our lead MySQL Cluster support engineers, regularly works with users new to MySQL Cluster, assisting them in installation, configuration, scaling, etc. In this lab, Santo will share best-practices in getting started. Delivering Breakthrough Performance with MySQL Cluster Saturday 29th, 1730-1830, in Golden Gate room 5. Frazer Clement, lead MySQL Cluster software engineer, will demonstrate how to translate the awesome Cluster benchmarks (remember 1 BILLION UPDATEs per minute ?!) into real-world performance. You can also get some best practices from our new MySQL Cluster performance guide MySQL Cluster BoF Saturday 29th, 1900-2000, room Golden Gate 5. Come and get a demonstration of new tools for the installation and configuration of MySQL Cluster, and spend time with the engineering team discussing any questions or issues you may have. Developing High-Throughput Services with NoSQL APIs to InnoDB and MySQL Cluster Sunday 30th, 1145 - 1245, in Golden Gate room 7. In this session, JD Duncan and Andrew Morgan will present how to get started with both Memcached and new NoSQL APIs. JD and I recently ran a webinar demonstrating how to build simple Twitter-like services with Memcached and MySQL Cluster. The replay is available for download. Case Studies: MySQL Cluster @ El Chavo, Latin America’s #1 Facebook Game Sunday 30th, 1745 - 1845, in Golden Gate room 4. Playful Play deployed MySQL Cluster CGE to power their market leading social game. This session will discuss the challenges they faced, why they selected MySQL Cluster and their experiences to date. You can read more about Playful Play and MySQL Cluster here A Journey into NoSQLand: MySQL’s NoSQL Implementation Sunday 30th, 1345 - 1445, in Golden Gate room 4. Lig Turmelle, web DBA at Kaplan Professional and esteemed Oracle Ace, will discuss her experiences working with the NoSQL interfaces for both MySQL Cluster and InnoDB Evaluating MySQL HA Alternatives Saturday 29th, 1430-1530, room Golden Gate 5 Henrik Ingo, former member of the MySQL sales engineering team, will provide an overview of various HA technologies for MySQL, starting with replication, progressing to InnoDB, Galera and MySQL Cluster What about the other stuff? Of course MySQL Connect has much, much more than MySQL Cluster. There will be lots on replication (which I'll blog about soon), MySQL 5.6, InnoDB, cloud, etc, etc. Take a look at the full Content Catalog to see more. If you are attending, I hope to see you at one of the Cluster sessions...and remember, registration is still open

Read the article

CodePlex Daily Summary for Tuesday, March 16, 2010

CodePlex Daily Summary for Tuesday, March 16, 2010New ProjectsAAPL-MySQL (a MySql implementation of the Agile ADO.Net Persistence Layer): Using the code conventions and code of the Agile ADO.Net Persistence Layer to build a MySql implementationAddress Book: Address Book is simple and easy to use application for storing and editing contacts. It has many features like search and grouping. It's developed ...Airplanes: Airplanes GameAJAX Fax document viewer: The AJAX Fax document viewer is an ASP.net 4.0 project which uses a Seadragon control to display Tiff/Tif files inside the browser. Since it's base...AxeFrog Core: This project contains the foundational code used in several other projects.Bolão: O objetivo deste projeto é estimular a troca de informações e experiências sobre arquitetura e desenvolvimento de software na prática, através do d...Caramel Engine: This is designed to be a logic engine for developing a wide variety of games. To include card logic, dice logic, territories, players, and even man...DotNetNuke® Skin BrandWorks: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by M Perakakis & M Siganou (e-bilab). A very minimal look sk...DotNetNuke® Skin Reasonable: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Ralph Williams of Architech Solutions. A clean, classy, professi...DotNetNuke® Skin Seasons: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Atul Handa and Kevin McCusker of Mercer. This skin is a generic ...File Eraser: File Eraser make it esasier for IT Administrator or Advanced Users to administer files and eliminate long addresses, even UNC. It's developed in VB...GreenEyes: My project for IT personalHulu Launcher: Hulu Launcher is a simple Windows Media Center add-in that attempts to launch Hulu Desktop and manage the windows as seamlessly as possible.Imenik: Imenik makes it easier for users to organise their contacts!KharaPOS: KharaPOS is an Exemplar application for Silverlight 4, WCF RIA Services and .NET Framework 4.Mantas Cryptography: Pequena biblioteca de criptografia com suporte aos algorítmos DES, RC2, Rexor e TripleDES. Gera hashes HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA (SHA1, S...MapWindow3D: A C# DirectX library that extends the MapWindow 6.0 geospatial software library by adding an external map. The map supports rotation and tilting i...Microsoft Silverlight Analytics Framework: Extensible Web Analytics Framework for Microsoft Silverlight Applications.Moq Examples: Unit tests demonstrating Moq features.Ncqrs: Framework that helps you to create Command-Query Responsibility Segregation based applications easily.NoLedge - Notetaking and knowledge database: NoLedge is an easy knowledge gathering and notetaking freeware with a simple interface. You can link a note with different titles and can retrieve ...Numina Application Framework: The framework is a set of tools that help facilitate authentication, authorization, and access control. It is much more than a SSO. It is a central...OData SDK for PHP: OData SDK for PHP is a library to facilitate the connection with OData Services.patterns & practices - Windows Azure Guidance: p&p site for Windows Azure related guidance.projecteuler.net: Exploring projecteuler.net using F#ResumeTracker: Small and easy to use tool that helps to track your job applications. To report bugs or for suggestions please email kirunchik@gmail.com.Selection Maker: Have you ever create a collection of music files? Imagine you just want to pick best of them by your choice. you should go to several folder,play...ShureValidation: Multilingual model validation library. Supports fluent validations, attribute validations and own custom validations.Simple Phonebook: Simple phonebook allows you to store contacts. It also allows you to export the contacts to .txt or .csv. This application is written in C#, but it...SoftUpd: A usefull library which provides an Update feature to any .Net software.sTASKedit: This program can modify and export Perfect World tasks.data files...Tigie: Tigie is a simple CMS system for basic website. It's simple, easy to customize. you'll have a very basic cms to start with and expand for it. All c...toapp: ap hwUltiLogger: UltiLogger is a fast, lightweight logging library programmed in C#. It is meant as a fast, easy, and efficient way for developers to access a relia...Unnme: UnnmeVisual Studio 2008 NUnit snippets: A simple set of useful NUnit snippets, for Visual studio 2008.webdama: italian checkers game c#XBrowser - Headless Browser for .Net: XBrowser is a "headless" web browser written for .Net applications using C#. It is designed to allow automated, remote controlled and test-based br...XML Integrator: XML integration, collaborative toolNew ReleasesAddress Book: Address Book: Address BookAddress Book: Address Book - Source: Address Book source code.AJAX Fax document viewer: AJAXTiff_Source 1.0: Source project for the AJAX Tiff viewer v1.0. Written in Visual Studio 2010 RC using ASP.net 4.0ASP.Net Routing Configuration: mal.Web.Routing v1.0.0.0: mal.Web.Routing v1.0.0.0ASP.NET Wiki Control: Release 1.0: Includes VS2010 Solution and Project files but targets the 3.5 framework so can still be used with VS2008 if new project files are created.BingPaper: Beta: BingPaper Beta Release This Beta release contains quite a few improvements: This Beta release contains a complate overhaul of the replacement tok...Bolão: teste: testeDotNetNuke® Skin Reasonable: Reasonable Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Ralph Williams of Architech Solutions. A clean, classy, professi...DotNetNuke® Skin Seasons: Seasons Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Atul Handa and Kevin McCusker of Mercer. This skin is a generic ...dylan.NET: dylan.NET v. 9.2: In TFS Serverdylan.NET Apps: dylan.NET Apps v. 1.1: First version of dnu.dll together with v.9.2 of dylan.NETFamily Tree Analyzer: Version 1.1.0.0: Version 1.1.0.0 Census report now shows in bold those individuals you KNOW to be alive at the date of the census. Direct Ancestors on census repor...GLB Virtual Player Builder: 0.4.1: Minor change to reset non-major/minor attr to 8.Hulu Launcher: HuluLauncher Release 1.0.1.1: HuluLauncher Release 1.0.1.1 is the initial, barely-tested release of this Windows Media Center add-in. It should work in Vista Media Center and 7 ...Imenik: Imenik: Imenik is now available!jQuery Library for SharePoint Web Services: SPServices 0.5.3: NOTE: While I work on new releases, I post alpha versions. Usually the alpha versions are here to address a particular need. I DO NOT recommend usi...KeelKit: KeelKit 1.0.3800: 更新内容如下: 优化了DBHelper的一些机制修正一些BUG 支持Mysql PHP代理，使得能通过Web代理的方式远程访问数据库服务器添加Model实例化方法，支持所有非自动计算字段的参数实例化、支持所有非空字段实例化添加Model中的常量，使用这些常量可以获得表名称。添加了自...Managed Extensibility Framework (MEF) Contrib: MefContrib 0.9.0.0: Updated to MEF Preview 9 Moved MefContrib.Extensions.Generics to MefContrib.Hosting.Generics Moved MefContrib.Extensions.Generics.Tests to MefC...MooiNooi MVC2LINQ2SQL Web Databinder: MooiNooi MVC2LINQ2SQL Web Databinder v0.1.1: Repaired a problem with collections... only index number under 10 were allowed... Please send me your comments and rate the project. Sorry.Mouse Gestures for .NET: Mouse Gestures 1.0: Improved version of the component + sample application. Version 1.0 is not backward compatible.MoviesForMyBlog: MoviesForMyBlog V1.0: This is version 1.0Nito.KitchenSink: Version 1: The first release of Nito.KitchenSink, which uses Nito.Linq 0.1. Please report any issues via the Issue Tracker.Nito.LINQ: Beta (v0.1): This is the first official public release of Nito.Linq. This release only supports .NET 3.5 SP1 with the Microsoft Rx libraries. The documentation...Nito.LINQ: Beta (v0.2): Added ListSource.Generate overloads that take a delegate for counting the list elements.OData SDK for PHP: OData SDK for PHP: This is an updated version of the ADO.NET Data Services toolkit for PHP. It includes full support for OData Protocol V2.0 specification, better pro...Orchard Project: Orchard Latest Build (0.1.2010.0312): This is a technical preview release of Orchard. Our intent with this release is to demonstrate representative experiences for our audiences (end-us...patterns & practices – Enterprise Library: Enterprise Library 5.0 - Beta2: This is a preliminary release of the code and documentation that may potentially be incomplete, and may change prior to the final release of Enterp...patterns & practices - Unity: Unity 2.0 - Beta2: This is a preliminary release of the code and documentation that may potentially be incomplete, and may change prior to the final release of Unity ...patterns & practices - Windows Azure Guidance: Code drop - 1: This initial version is the before the cloud baseline application, so you won’t find anything related to Windows Azure here. Next iteration, we'l...Rawr: Rawr 2.3.12: - First, a note about Rawr3. Rawr3 has been in development for quite a while now, and we know that everyone's eager to get it. It's been held back ...ResumeTracker: Resume Tracker v1.0: First release.Selection Maker: Selection Maker 1.0: This is just the first release of this programSevenZipSharp: SevenZipSharp 0.61: Added: Windows Mobile support bool Check() method for Extractor to test archives integrity FileExtractionFinished now returns FileInfoEventArgs...Silverlight 3.0 Advanced ToolTipService: Advanced ToolTipService v2.0.1: This release is compiled against the Silverlight 3.0 runtime. A demonstration on how to set the ToolTip content to a property of the DataContext o...Silverlight Flow Layouts library: SL and WPF Flow Layouts library March 2010: This release indtroduces some bug fixes, performance improvements, Silverlight 4 RC and WPF 4.0 RC support. Flow Layouts Library is a control libra...Simple Phonebook: SimplePhonebook Visual Studio 2010 Solution: Ovo je cijeli projekt u kojem se nalaze svi source fileovi koje sam koristio u izradi ove aplikacije. Za pokretanje je potreban Visual Studio 2010....Simple Phonebook: SimplePhonebook.rar: U ovoj .rar datoteci nalaze se izvršni fileovi. _ In this .rar file you can find .exe file needed for executing the application.SLARToolkit - Silverlight Augmented Reality Toolkit: SLARToolkit 1.0.1.0: Updated to Silverlight 4 Release Candidate. Introduces the new GenericMarkerDetector which uses the IXrgbReader interface. See the Marker Detecto...sPWadmin: pwAdmin v1.0: Fixed: Templates can now be saved server restart persistant (wait at least 60 seconds between saving and restarting)SQL Director for Dependencies & Indexes: SDD CTP 1.0: SQL Director for Dependencies allows you to view dependencies between tables, views, function, stored procedures and jobs. Newest Testing build, f...SqlCeViewer: SeasonStar Database Management 0.7.0.2: Update the user interface to help user understand clearly how to use .UltiLogger: Initial alpha release: Important! This is not a feature-complete release! It contains the logging priorities, and an interface for building logging systems from. THERE IS...Visual Studio 2008 NUnit snippets: Version 1.0: First stable release.Zeta Resource Editor: Source Code Release 2010-03-16: New source code. Binary setup is also available.Most Popular ProjectsMetaSharpWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitASP.NET Ajax LibraryWindows Presentation Foundation (WPF)ASP.NETLiveUpload to FacebookMost Active ProjectsLINQ to TwitterOData SDK for PHPRawrN2 CMSpatterns & practices – Enterprise LibraryDirectQBlogEngine.NETMapWindow6SharePoint Team-MailerNB_Store - Free DotNetNuke Ecommerce Catalog Module

Read the article

Letter to Ballmer: Making Better Consumer Devices

- by andrewbrust

Last year, I wrote Steve Ballmer an email, and he was kind enough to write me back. The email contained a scan of a column I wrote praising Microsoft’s BI strategy. His reply contained three simple words: “Super nice thanks.” Well, now I’d like to write to Steve again, in an open letter format, and this time the love may be a bit tougher. But I’m still super earnest. The past two days have been eventful ones for Microsoft: The company announced the departure of company veterans Robbie Bach and J Allard and the market announced Apple is now besting Microsoft in market capitalization. Plus, announcements were made that make it plain that Ballmer will, in effect, be running Microsoft’s Entertainment & Devices division himself. With that in mind, I’d like to offer my list of a dozen things I think Microsoft’s CEO should do to improve that division’s offerings and, hopefully, its bottom line. So here goes: 1. On Windows Phone 7, Stay the Course The press is teeming with headlines and reader comments proclaiming the death-before-arrival of Windows Phone 7. That’s plain silly. You’ve got the makings of a great and unique SmartPhone platform, and you’re the only company (even considering RIM) that can offer full fidelity Exchange integration, not to mention implementing Office on the device. Let the existing team finish this puppy and ship it. And then have them pump out a few updates, over-the-air, quickly. Show them that Google Android’s not the only product that can do good, rapid dot releases. And another thing: make sure your OEMs’ devices have flawless touch screens. If they don’t, then you shouldn’t certify them for delivery to customers. Period. Oh, and kill the Kin, quietly. It was DOA, and you know it. 2. Move Media Center to the Xbox Platform Media Center is, at its core, a good product. But delivering a media distribution and DVR platform on a sophisticated PC operating system like Windows 7 just creates too many moving parts. Xbox already functions as the best Media Center extender device – it should actually be the hub as well. Media Center is mostly based on .NET code – and XNA is a .NET environment for Xbox – find a way to bridge that small gap and make Media Center a joy to work with instead of a frustration. Beating Apple TV out of this sub-market is the lowest hanging fruit on the tree (goofy pun, but it’s true). 3. Integrate Media Center with Mediaroom, or Kill the Latter You have two media products with almost identical names. One is for standalone DVRs and the other is for IPTV cable set tops with DVR capabilities. Can we merge these please? My previous request of putting Media Center on Xbox would seem to tie into this nicely, since you’ve announced plans to do that with Mediaroom already. 4. Fix the Red Ring of Death People love the Xbox, but they really don’t love sending their consoles back every 18-24 months, when they get a bunch of red lights flashing on power up. You’ve handled this defect about as gracefully as possible, but it’s been around for a long time now and it doesn’t seem to be fixed yet. You can do better. In fact, you must do better, or you insult your customers. 5. Add Blu Ray to Xbox I know, streaming movies are the future; physical media is legacy technology. So if that’s true, why did you back HD DVD so hard? You know why: for now, the film studios won’t allow a large selection of new release, HD, surround sound content be distributed on any medium other than Blu Ray or cable pay per view/on-demand. Don’t you want home theater buffs to see the Xbox as a fantastic device for their rigs? Don’t you want to put PlayStation 3 out of its misery? And if you follow my suggestions above (move Media Center to the Xbox and fix the Red Ring problem), you’d have it all sewn up. Do I think Blu Ray functionality will move a lot of units? No. Do I think that it would move more units with desperately needed influential home theater consumers? You bet. And you might sell more ZunePass subscriptions in the process. But while you’re at it, make the fan quieter, please. 6. Make More of Windows Home Server Home Server is a fantastic product. And for reasons unknown to me, it seems like you’re letting it languish. Development of the add-in ecosystem seems underfunded. WHS’ unparalleled ease of use and reliability for home PC backup (and emergency restores) goes unsung. Product cycles are slow. Support for your OEMs, who are doing great work, especially in the green space with Atom CPUs, seems lacking. You’ve married a trophy girl and you keep her cloistered at home! That’s cruel, unusual and, um, incredibly ill-advised. Make use of this ace card, and while you’re at it, give it real integration with Media Center. The integration thus far proof-of-concept quality. You should go way past that – both products will benefit immeasurably. 7. Set Up a Partner Platform for Custom Installers There’s a whole sub-industry of companies that install, integrate and configure home theater, security and connected home products. They have an industry group. They are influential in the high-end of the consumer electronics industry, and so are their customers. They love Media Center and they love Windows Home Server. But I have talked to several of them at the Consumer Electronics Show and they tell me you don’t love them. They find it very difficult to do business with Microsoft, even though they want nothing more than to sell and evangelize your platform. This is a travesty. Please fix it. Get Allison Watson and the Microsoft Partner Network on board and have her hire someone who knows how to run a channel program for consumer electronics companies. Problem solved. Markets expanded. 8. Make Your Own Hardware In other areas, I know you love your partners. I help run one, so I appreciate that. But when it came to Xbox and Zune you built them it yourself (albeit on a contract basis, which is fine). Windows Phone 7 has a chance to work as an OEM play, but it would work better if you produced the devices. At least consider building a reference device that sells alongside your OEMs’ offerings. That’s what Google did with the Nexxus One. And while that phone was not itself a big seller, it catalyzed two wonderful things : (1) a quality bar was set and (2) partners exceeded it. Before the Nexxus One, the best Android handset out there was the Motorola Droid. The Nexxus One was better, and the HTC Droid Incredible and Evo 4G are now even better than Google’s phone, which is why Verizon and Sprint decided not to carry it. Imagine if all Windows Phone 6.x devices were on par with the HTC HD2. I tend to believe you’d have a lot bigger market share than you do now. 9. Continue with Your Retail Initiative From what I hear, it sounds like it’s going well. And this goes right along with making your own hardware. When you build it, they will come. And then it makes the likes of Best Buy and Staples do better. 10. Make an Acquisition (or Two) TiVo and/or Moxi look ripe for the picking. With their ability to build stuff people love and your ability to run a business, you might just have something. But do a better job than you did when you bought Danger. Buy the ideas, not just the customers, eh? 11. Make Beautiful Stuff You’ve heard this one before, I know. But I have some head-shrinking advice on this one. You know that Apple obsesses over its industrial design. You know that appeals to consumers. But it seems you think doing so is Apple’s game exclusively and so you shouldn’t even try. Bull dinky. Come to New York and visit the Museum of Modern Art’s Architecture and Design gallery. You’ll see that lots of companies and product categories have had very high design value well before Apple existed. You can do this, and the Zune HD was a great start. Now run with that. Find those negative voices in your head that are telling you that you can’t and shut them up. For good. 12. Burst the Bubble Some of the products you’ve built seem like they were conceived in a bizarro world. That would appear to be the result of groupthink. You must do better. And there’s lots of people willing to advise you. This includes just about everyone in the Regional Director program, and probably a bunch of MVPs. Heck, I bet the guys at Engadget could help out too. Imagine if you let them see the Kin before it shipped. Talk to high-end gear consumers. Talk to Best Buy and CostCo customers too. Signing Off I hope this was of value to you. As I wrote this I kept telling myself how obvious, even trite, some of these pieces of advice were and then, because of that, doubting they’d really help. But I decided that they must not be obvious to Microsoft. Sometimes when you get wrapped up in stuff, it’s hard to clear your head. I think my head’s pretty clear here though (I’m wrapped up in other stuff), so maybe my perspective can help. If not, well, then, I guess they all can’t be super nice.

Read the article

Fitting it together, database, reporting, applications in C#

- by alvonellos

Introduction Preamble I was hesitant to post this, since it's an application whose intricate details are defined elsewhere, and answers may not be helpful to others. Within the past few weeks (I was actually going to write a blog post about this after I finished) I've discovered that the barrier I'm encountering is one that's actually quite common for newer developers. This question is not so much about a specific thing as it is about piecing those things together. I've searched the internet far and wide, and found many tutorials on how to create applications that are kind of similar to what I'm looking for. I've also looked at hiring another, more experienced, developer to help me along, but all I've gotten are unqualified candidates that don't have the experience necessary and won't take care of the client or project like I will. I'd rather have the project never transpire than to release a solution that is half-baked. I've asked professors at my school, but they've not turned up answers to my question. I'm an experienced developer, and I've written many applications that are -- very abstractly -- close to what I'm doing, but my experiences from those applications aren't giving me enough leverage to solve this particular problem. I just hope that posting this article isn't a mistake for me to write. Project Description I have a project I'm working on for a client that is a rewrite of an application, originally written in Foxpro 2.6 by someone before me, that performs some analysis (which, sadly, I'm not allowed to disclose as per of my employment contract) on financial data. One day, after a long talk between the client and I -- where he intimately described his frustrations with all the bugs I've been hacking out of this code for 6 months now -- he told me to just rewrite it and gave me a month to write a good 1/8 of this 65k LOC Foxpro monstrosity. this 65k line of code foxpro monstrosity. It'll take me a good 3 - 6 months to rewrite this software (I know things the original programmer did not, like inheritance) going as I am right now, but I'm quickly discovering that I'm going to need to use databases. Prior to this contract I didn't even know about foxpro, and so I've had to learn foxpro on the fly, write procedures and make modifications to the database. I've actually come to like it, and this project would be rewritten in Foxpro if it were still a supported language, because over the past few months, I've come to like the features of Foxpro that make it so easy to develop data-driven applications. I once perfomed an experiment, comparing C# to Foxpro. What took me 45 minutes in C# took me two in Foxpro, and I knew C# prior to Foxpro. I was hoping to leverage the power of C#, but it intimidates me that in foxpro, you can have one line of code and be using a database. Prior to this, I have never written any serious database development from scratch. All the applications that I've written are in a different league. They are either completely data-naive or data-naive enough that I can get away with not using a database through serialization or by designing algorithms that work with the data in a manner that is stateless, so there is no need to worry about databases. I've come to realize, very quickly, that serialization and my efficacy with data structures has been my crutch all these years that's prevented me from adventuring into databases, and has consequently hindered my success in real-world programming. Sure, I've written some database stuff in Perl and Python, and I've done forms and worked with relational databases and tables, I'm a wizard in Access and Excel (seriously) and can do just about anything, but it just feels unnatural writing SQL code in another language... I don't mind writing SQL, and I don't It's that bridge between the database and the program code that drives me absolutely bonkers. I hope I'm not the only one to think this, but it bothers me that I have to create statements like the following string sSql = "SELECT * from tablename" When there's really no reason for that kind of unchecked language binding between two languages and two API's. Don't get my wrong, SQL is great, but I don't like the idea that, when executing commands on a SQL database, that one must intermix database and application software, and there's no database independence, which means that different versions of different databases can break code. This isn't very nice. The nicest thing about Foxpro is the cohesiveness between programming language and database. It's so easy, and Foxpro makes it easy, because the tool just fits the task. I can see why so many developers have created a career with this language, because it lowered the barrier of entry to data-driven applications that so many businesses need. It was wonderful. For my purposes today, with the demands and need for community support, extensibility, and language features, Foxpro isn't a solution that I feel would be the right tool for the job. I'm also worried about working too heavy with the database, because I've seen data-driven .NET applications have issues with database caches, running out of memory, and objects in the database not being collected. (Memory leaks) And OH the queries. Which one, how, and why? There are a plethora of different ways that a database can be setup, I think I counted 5 or 6 different kinds of database applications alone that I can chose from. That is a great mountain for me to climb when I don't even know where to begin when it comes to writing data-driven applications. The problem isn't that I don't know SQL or that I don't know C#. I know both and have worked with both extensively. It's making them work together that's the problem, and it's something I've never done in C# before. Reports The client likes paper. The data needs to be printed out in a format that is extensible, layered, and easy to use. I have never done reporting before, and so this is a bit of a problem. From the data source comes crystal reports, and so there's a dependency on the database, from what I understand. Code reuse A large part of the design decision that I've gone through so far is to break the task of writing a piece of this software into routines and modular DLL's and so forth such that much of the code can be reused. For example, when I setup this database, I want to be able to reuse the same database code over and over again. I also want to make sure that when the day comes that another developer is here, that he/she will be able to pick up just where I left off. The quicker I develop these applications, the better off I am. Tasks & Goals In my project, I need to write routines that apply algorithms and look for predefined patterns in financial data. Additionally, I need to simulate trading based on predefined algorithms and data. Then I need to prepare reports on that data. Additionally, I need to have a way to change the code base for this application quickly and effectively, without hacking together some band-aid solution for a problem that really needs a trauma ward. Special Considerations The solution must be fast, run quickly on existing hardware, and not be too much of a pain to maintain and write. I understand that anything I write I'm married to -- I'm responsible for the things that I write because my reputation and livelihood is dependent on it. Do I really need a database? What about performance? Performance was such a big issue that I hand wrote a data structure that is capable of performing 2 billion operations, using a total of 4 gigs of memory in under 1/4 of a second using the standard core two duo processor. I could not find a similar, pre-written data structure in C# to perform this task. What setup do I use in terms of database? What about reporting? I'd prefer to have PDF's generated, but I'd like to be able to visually sketch those reports and then just have a ReportFactory of some sort, that when I pass some variables in, it just does that data. About Me I'm a lone developer for a small business in this area. This is the first time I've done this and I've never had the breadth and depth of my knowledge tested. I'm incredibly frustrated with this project because I feel incredibly overwhelmed with the task at hand. I'm looking for that entry level point where I can draw a line and say "this is what I need to do" Conclusion I may have not been clear enough on my post. I'm still new to this whole thing, and I've been doing my best to contribute back to the community that I've leached so much knowledge from. I'd be glad to edit my post and add more information if possible. I'm looking for a big-picture solution or design process that helps me get off the ground in this world of data-driven applications, because I have a feeling that it's going to be concentric to my entire career as a programmer for some time. Specifically, if you didn't get it from the rest of the post (I may not have been clear enough) I really need some guidance as to where to go in terms of the design decisions for this project. Some things that'll be useful will be a pro/con list for the different kinds of database projects available in VS2010. I've tried, but generating that list has been as hard as solving the problem itself... If you could walk a developer writing a data-driven application for the first time in C#, how would you do that? Where would you point them to?

Read the article

jQuery, ASP.NET, and Browser History

- by Stephen Walther

One objection that people always raise against Ajax applications concerns browser history. Because an Ajax application updates its content by performing sneaky Ajax postbacks, the browser backwards and forwards buttons don’t work as you would normally expect. In a normal, non-Ajax application, when you click the browser back button, you return to a previous state of the application. For example, if you are paging through a set of movie records, you might return to the previous page of records. In an Ajax application, on the other hand, the browser backwards and forwards buttons do not work as you would expect. If you navigate to the second page in a list of records and click the backwards button, you won’t return to the previous page. Most likely, you will end up navigating away from the application entirely (which is very unexpected and irritating). Bookmarking presents a similar problem. You cannot bookmark a particular page of records in an Ajax application because the address bar does not reflect the state of the application. The Ajax Solution There is a solution to both of these problems. To solve both of these problems, you must take matters into your own hands and take responsibility for saving and restoring your application state yourself. Furthermore, you must ensure that the address bar gets updated to reflect the state of your application. In this blog entry, I demonstrate how you can take advantage of a jQuery library named bbq that enables you to control browser history (and make your Ajax application bookmarkable) in a cross-browser compatible way. The JavaScript Libraries In this blog entry, I take advantage of the following four JavaScript files: jQuery-1.4.2.js – The jQuery library. Available from the Microsoft Ajax CDN at http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.js jquery.pager.js – Used to generate pager for navigating records. Available from http://plugins.jquery.com/project/Pager microtemplates.js – John Resig’s micro-templating library. Available from http://ejohn.org/blog/javascript-micro-templating/ jquery.ba-bbq.js – The Back Button and Query (BBQ) Library. Available from http://benalman.com/projects/jquery-bbq-plugin/ All of these libraries, with the exception of the Micro-templating library, are available under the MIT open-source license. The Ajax Application Let’s start by building a simple Ajax application that enables you to page through a set of movie database records, 3 records at a time. We’ll use my favorite database named MoviesDB. This database contains a Movies table that looks like this: We’ll create a data model for this database by taking advantage of the ADO.NET Entity Framework. The data model looks like this: Finally, we’ll expose the data to the universe with the help of a WCF Data Service named MovieService.svc. The code for the data service is contained in Listing 1. Listing 1 – MovieService.svc using System.Data.Services; using System.Data.Services.Common; namespace WebApplication1 { public class MovieService : DataService<MoviesDBEntities> { public static void InitializeService(DataServiceConfiguration config) { config.SetEntitySetAccessRule("Movies", EntitySetRights.AllRead); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } } } The WCF Data Service in Listing 1 exposes the movies so that you can query the movie database table with URLs that looks like this: http://localhost:2474/MovieService.svc/Movies -- Returns all movies http://localhost:2474/MovieService.svc/Movies?$top=5 – Returns 5 movies The HTML page in Listing 2 enables you to page through the set of movies retrieved from the WCF Data Service. Listing 2 – Original.html <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Movies with History</title> <link href="Design/Pager.css" rel="stylesheet" type="text/css" /> </head> <body> <h1>Page <span id="pageNumber"></span> of <span id="pageCount"></span></h1> <div id="pager"></div> <br style="clear:both" /><br /> <div id="moviesContainer"></div> <script src="http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.js" type="text/javascript"></script> <script src="App_Scripts/Microtemplates.js" type="text/javascript"></script> <script src="App_Scripts/jquery.pager.js" type="text/javascript"></script> <script type="text/javascript"> var pageSize = 3, pageIndex = 0; // Show initial page of movies showMovies(); function showMovies() { // Build OData query var query = "/MovieService.svc" // base URL + "/Movies" // top-level resource + "?$skip=" + pageIndex * pageSize // skip records + "&$top=" + pageSize // take records + " &$inlinecount=allpages"; // include total count of movies // Make call to WCF Data Service $.ajax({ dataType: "json", url: query, success: showMoviesComplete }); } function showMoviesComplete(result) { // unwrap results var movies = result["d"]["results"]; var movieCount = result["d"]["__count"] // Show movies using template var showMovie = tmpl("<li><%=Id%> - <%=Title %></li>"); var html = ""; for (var i = 0; i < movies.length; i++) { html += showMovie(movies[i]); } $("#moviesContainer").html(html); // show pager $("#pager").pager({ pagenumber: (pageIndex + 1), pagecount: Math.ceil(movieCount / pageSize), buttonClickCallback: selectPage }); // Update page number and page count $("#pageNumber").text(pageIndex + 1); $("#pageCount").text(movieCount); } function selectPage(pageNumber) { pageIndex = pageNumber - 1; showMovies(); } </script> </body> </html> The page in Listing 3 has the following three functions: showMovies() – Performs an Ajax call against the WCF Data Service to retrieve a page of movies. showMoviesComplete() – When the Ajax call completes successfully, this function displays the movies by using a template. This function also renders the pager user interface. selectPage() – When you select a particular page by clicking on a page number in the pager UI, this function updates the current page index and calls the showMovies() function. Figure 1 illustrates what the page looks like when it is opened in a browser. Figure 1 If you click the page numbers then the browser history is not updated. Clicking the browser forward and backwards buttons won’t move you back and forth in browser history. Furthermore, the address displayed in the address bar does not change when you navigate to different pages. You cannot bookmark any page except for the first page. Adding Browser History The Back Button and Query (bbq) library enables you to add support for browser history and bookmarking to a jQuery application. The bbq library supports two important methods: jQuery.bbq.pushState(object) – Adds state to browser history. jQuery.bbq.getState(key) – Gets state from browser history. The bbq library also supports one important event: hashchange – This event is raised when the part of an address after the hash # is changed. The page in Listing 3 demonstrates how to use the bbq library to add support for browser navigation and bookmarking to an Ajax page. Listing 3 – Default.html <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Movies with History</title> <link href="Design/Pager.css" rel="stylesheet" type="text/css" /> </head> <body> <h1>Page <span id="pageNumber"></span> of <span id="pageCount"></span></h1> <div id="pager"></div> <br style="clear:both" /><br /> <div id="moviesContainer"></div> <script src="http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.js" type="text/javascript"></script> <script src="App_Scripts/jquery.ba-bbq.js" type="text/javascript"></script> <script src="App_Scripts/Microtemplates.js" type="text/javascript"></script> <script src="App_Scripts/jquery.pager.js" type="text/javascript"></script> <script type="text/javascript"> var pageSize = 3, pageIndex = 0; $(window).bind('hashchange', function (e) { pageIndex = e.getState("pageIndex") || 0; pageIndex = parseInt(pageIndex); showMovies(); }); $(window).trigger('hashchange'); function showMovies() { // Build OData query var query = "/MovieService.svc" // base URL + "/Movies" // top-level resource + "?$skip=" + pageIndex * pageSize // skip records + "&$top=" + pageSize // take records +" &$inlinecount=allpages"; // include total count of movies // Make call to WCF Data Service $.ajax({ dataType: "json", url: query, success: showMoviesComplete }); } function showMoviesComplete(result) { // unwrap results var movies = result["d"]["results"]; var movieCount = result["d"]["__count"] // Show movies using template var showMovie = tmpl("<li><%=Id%> - <%=Title %></li>"); var html = ""; for (var i = 0; i < movies.length; i++) { html += showMovie(movies[i]); } $("#moviesContainer").html(html); // show pager $("#pager").pager({ pagenumber: (pageIndex + 1), pagecount: Math.ceil(movieCount / pageSize), buttonClickCallback: selectPage }); // Update page number and page count $("#pageNumber").text(pageIndex + 1); $("#pageCount").text(movieCount); } function selectPage(pageNumber) { pageIndex = pageNumber - 1; $.bbq.pushState({ pageIndex: pageIndex }); } </script> </body> </html> Notice the first chunk of JavaScript code in Listing 3: $(window).bind('hashchange', function (e) { pageIndex = e.getState("pageIndex") || 0; pageIndex = parseInt(pageIndex); showMovies(); }); $(window).trigger('hashchange'); When the hashchange event occurs, the current pageIndex is retrieved by calling the e.getState() method. The value is returned as a string and the value is cast to an integer by calling the JavaScript parseInt() function. Next, the showMovies() method is called to display the page of movies. The $(window).trigger() method is called to raise the hashchange event so that the initial page of records will be displayed. When you click a page number, the selectPage() method is invoked. This method adds the current page index to the address by calling the following method: $.bbq.pushState({ pageIndex: pageIndex }); For example, if you click on page number 2 then page index 1 is saved to the URL. The URL looks like this: Notice that when you click on page 2 then the browser address is updated to look like: /Default.htm#pageIndex=1 If you click on page 3 then the browser address is updated to look like: /Default.htm#pageIndex=2 Because the browser address is updated when you navigate to a new page number, the browser backwards and forwards button will work to navigate you backwards and forwards through the page numbers. When you click page 2, and click the backwards button, you will navigate back to page 1. Furthermore, you can bookmark a particular page of records. For example, if you bookmark the URL /Default.htm#pageIndex=1 then you will get the second page of records whenever you open the bookmark. Summary You should not avoid building Ajax applications because of worries concerning browser history or bookmarks. By taking advantage of a JavaScript library such as the bbq library, you can make your Ajax applications behave in exactly the same way as a normal web application.

Read the article

CodePlex Daily Summary for Friday, April 30, 2010

CodePlex Daily Summary for Friday, April 30, 2010New ProjectsAcres2: This is the new hotnessAsoraX.de - AirlineTycoon: EntwicklungsPhase von AsoraX.deazshop: Ecommerce macros and user controls based on Commerce4Umbraco from Umbraco CMS Project.BioPhotoAnalyzer: Some exercises with F#, WPF and Mathematical methods for quantitative analysis of biological photos, such as those obtained from microscopy, PAGE etcCECS622 - Simulations - South Computing Center: This simulation will be used to study the traffic flow of the South Computing Center (SCC) on the UofL campus. Document.Viewer: Basic document viewer for Windows XP, Vista and Windows 7 that supports FlowDocument, Rich and Plan Text FormatsDotNetNuke 5 Thai Language Pack: DotNetNuke Thai Language PackDotNetNuke Skins Pack: We derive html/css template from www.freecsstemplates.org and apply to DotNetNuke 4 & 5 Skins Pack.Dynamics AX Business Intelligence: Sample code for creating and using Dynamics AX Business Intelligence Easy Chat: Very simple kind of chat; it got DOS interface. It's just to start the server start the client enter the IP, enter your name, and you're ready to go!Html Source Transmitter Control: This web control allows getting a source of a web page, that will displayed before submit. So, developer can store a view of the html page, that wa...HydroServer - CUAHSI Hydrologic Information System Server: HydroServer is a set of software applications for publishing hydrologic datasets on the Internet. HydroServer leverages commercial software such a...Lisp.NET: Lisp.NET is a project that demonstrates how the Embedded Common Lisp (ECL) environment can be loaded and used from .NET. This enables Common Lisp ...Live-Exchange Calendar Sync: Live - Exchange Calendar Sync synchronizes calendars of users between 2 Exchange servers (it can be Live Calendar also). It's developed in C#. It u...MaLoRT : Mac Lovin' RayTracer: RaytracerMojo Workflow Web UI: Mojo Workflow Web UIMoonRover - Enter Island: Simple Graphics consumer application that simulates Moon RoversMVC Music Store: MVC Music Store is a tutorial application built on ASP.NET MVC 2. It's a lightweight sample store which sells albums online, demonstrating ASP.NET ...OpenPOS: OpenPOS, a completely open and free point-of-sale systemPgcDemuxCLI: A modified version of PgcDemux (http://download.videohelp.com/jsoto/dvdtools.htm) that has better CLI support and progress reporting.Sample 01: basic summarySharedEx: App dev in VS2010 RTM and Silverlight 4.0 for Windows Phone 7!SharePoint 2010 Managed Metadata WebPart: This SharePoint 2010 webpart creates a navigation control from a Managed Metadata column assigned to a list/library. The Termset the column relates...SharePoint 2010 Service Manager: The SharePoint Service manager let's you start and stop all the SharePoint 2010 services on your workstation. This is useful if you are running S...Sharp DOM: Sharp DOM is a view engine for ASP.NET MVC platform allowing developers to design extendable and maintenable dynamic HTML layouts using C# 4.0 lang...simple fx: simple framework written in javascriptSimpleGFC.NET: Simple GFC is a .NET library written in C# for simplifying the connection to Google Friend Connect. It is designed to be simple and concise, not a...SPSS & PSPP file library: Library for importing SPSS (now called PASW) & PSPP .sav datafiles, developed in C#. Support for writing and SPSS portable-files will be implemente...TailspinSpyworks - WebForms Sample Application: Tailspin Spyworks demonstrates how extraordinarily simple it is to create powerful, scalable applications for the .NET platform. It shows off how t...VividBed: Business website.卢融凯的个人主页: 卢融凯的个人主页New ReleasesAssemblyVerifier: 4.0.0.0 Release: Updated to target .NET 4.0Bricks' Bane: Bricks' Bane Editor v1.0.0.4: I've added functionality to the editor, after some personal use. Plus I fixed a bug that was occurring on file loading mostly when the file was mod...Dambach Linear Algebra Framework: Linear Algebra Framework - Sneak Peak: This is just to get the code out there into the hands of potential users and to elicit feedback.DevTreks -social budgeting that improves lives and livelihoods: Social Budgeting Web Software, DevTreks alpha 4a: DevTreks calculators, analyzers, and story tellers are being upgraded so that they can be extended by third parties using either add-ins (Managed ...DirectQ: Release 1.8.3c: Fixes some more late-breaking bugs and adds some optimizations from the forthcoming 1.8.4 release. No Windows 98 build this time. I may add one a...Document Assembly from a SharePoint Library using the Open XML SDK: Solution for March 2010 rel of the Open XML SDK: Microsoft changed some class names between the December 2009 CTP and the March 2010 release of the Open XML SDK which means that old solution will ...Document.Viewer: 0.9.0: Whats New?: New icon set Bug fix'sDotNetNuke Skins Pack: DNN 80 Skins Pack: This released is the first for DNN 4 & 5 with Skin Token Design (legacy skin support on DNN 4 & 5)DotNetWinService: Release 1.0.0.0: This release includes four different scheduled tasks: 1) TaskURL: Petition a specific URL: when working on a ASP.NET website, it's sometimes ...Hammock for REST: Hammock v1.0.1: v1.0.1 ChangesFixes to improve OAuth stability Fixes for asynchronous timeouts Fixes and simplification for retries v1.0 FeaturesSimple, clean...Home Access Plus+: v4.1.1: v4.1.1 Change Log: Added Enable for Booking Resource to allow Resources to be disabled but not deleted Updated HAP.Config for above File Changes...HouseFly controls: HouseFly controls alpha 0.9.6.0: HouseFly controls release 0.9.6.0 alphaHydroServer - CUAHSI Hydrologic Information System Server: ODM Data Loader 1.1.3: Version 1.1.3 of the ODM Data Loader is only compatible with version 1.1 of ODM This Version Addresses : Memory issues in Version 1.1.2 that were ...Jobping Url Shortener: Source Code v0.1: Source code for the 0.1 release.LinkedIn® for Windows Mobile: LinkedIn for Windows Mobile v0.6: Fixed the crash after accepting the use of internet access.mojoPortal: 2.3.4.3: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2343-released.aspxMoonRover - Enter Island: Moon Rover: Simulates Rover Moves on MoonNanoPrompt: Release 0.4.1 - Beta 1.1: Now released: Beta 1.1 for .NET 4.0ORAYLIS BI.SmartDiff: Release 1.0.0: see change log for detailsQuickStart Engine (3D Game Engine for XNA): QuickStart Engine v0.22: Main FeaturesClean engine architecture Makes it easy to make your own game using the engine. Messaging system allows you to communicate between s...SharePoint 2010 Managed Metadata WebPart: Taxonomy WebPart 0.0.1: Initial version releasedSharePoint 2010 Service Manager: SharePoint Service Manager 2010 v1: Starts and stops all SharePoint services Works with both Microsoft SQL Server and SQL Server Express Edition (for SharePoint) Supports disablin...Shweet: SharePoint 2010 Team Messaging built with Pex: Shweet RTM Release: Shweet has been updated to work with the RTM of SharePoint and the latest version of Pex Visual Studio 2010 Power Tools. Know issues: Continuous I...Silverlight Testing Automation Tool: StatLight v1.0 - Beta 1: Things still to accomplish (before official v1 release)Item # 10716: Release build hangs on x64 machine Still awaiting UnitDriven change feedback...SPSS & PSPP file library: 0.1 alpha: This first test release allows to read an .sav SPSS/PSPP/PASW file and retreive the data, either in the form of a .net DataReader or as a custom Sp...SqlDiffFramework-A Visual Differencing Engine for Dissimilar Data Sources: SqlDiffFramework 1.0.0.0: Initial Public Release Requirements: .NET Framework 2.0 SqlDiffFramework is designed for the enterprise! Check with your system administrator (or...sqwarea: Sqwarea 0.0.210.0 (alpha): First public release. Deploy package contains : the documentation for classes. the azure package with the Web Role. the zip with assemblies wh...Sweeper: Sweeper Alpha 2: SweeperA Visual Studio Add-in for C# Code Formatting - Visual Studio 2008 Includes: A UI for options, Enable or disable any specific task you want ...TailspinSpyworks - WebForms Sample Application: TailspinSpyworks-v0.8: ASP.NET 4 ECommerce ApplicationTweetSharp: TweetSharp Release Candidate: New FeaturesComplete core rewrite for stability and speed, introducing Hammock http://hammock.codeplex.com Windows Phone 7, Silverlight 4 OOB (El...Wicked Compression ASP.NET HTTP Module: Wicked Compression ASP.NET HTTP Module Beta: Now supports AJAX from .NET Framework 2.0 through 4.0! Bug Fix for Excluded Paths! Binary Release Included for .NET Framework 2.0 through 4.0!Most Popular ProjectsRawrWBFS ManagerAJAX Control Toolkitpatterns & practices – Enterprise LibraryMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)iTuner - The iTunes CompanionASP.NETDotNetNuke® Community EditionMost Active ProjectsRawrpatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterHydroServer - CUAHSI Hydrologic Information System ServerGMap.NET - Great Maps for Windows Forms & PresentationParticle Plot Pivotpatterns & practices: Azure Security GuidanceSqlDiffFramework-A Visual Differencing Engine for Dissimilar Data SourcesNB_Store - Free DotNetNuke Ecommerce Catalog ModuleN2 CMS

Read the article

Ops Center 12c - Provisioning Solaris Using a Card-Based NIC

- by scottdickson

It's been a long time since last I added something here, but having some conversations this last week, I got inspired to update things. I've been spending a lot of time with Ops Center for managing and installing systems these days. So, I suspect a number of my upcoming posts will be in that area. Today, I want to look at how to provision Solaris using Ops Center when your network is not connected to one of the built-in NICs. We'll talk about how this can work for both Solaris 10 and Solaris 11, since they are pretty similar. In both cases, WANboot is a key piece of the story. Here's what I want to do: I have a Sun Fire T2000 server with a Quad-GbE nxge card installed. The only network is connected to port 2 on that card rather than the built-in network interfaces. I want to install Solaris on it across the network, either Solaris 10 or Solaris 11. I have met with a lot of customers lately who have a similar architecture. Usually, they have T4-4 servers with the network connected via 10GbE connections. Add to this mix the fact that I use Ops Center to manage the systems in my lab, so I really would like to add this to Ops Center. If possible, I would like this to be completely hands free. I can't quite do that yet. Close, but not quite. WANBoot or Old-Style NetBoot? When a system is installed from the network, it needs some help getting the process rolling. It has to figure out what its network configuration (IP address, gateway, etc.) ought to be. It needs to figure out what server is going to help it boot and install, and it needs the instructions for the installation. There are two different ways to bootstrap an installation of Solaris on SPARC across the network. The old way uses a broadcast of RARP or more recently DHCP to obtain the IP configuration and the rest of the information needed. The second is to explicitly configure this information in the OBP and use WANBoot for installation WANBoot has a number of benefits over broadcast-based installation: it is not restricted to a single subnet; it does not require special DHCP configuration or DHCP helpers; it uses standard HTTP and HTTPS protocols which traverse firewalls much more easily than NFS-based package installation. But, WANBoot is not available on really old hardware and WANBoot requires the use o Flash Archives in Solaris 10. Still, for many people, this is a great approach. As it turns out, WANBoot is necessary if you plan to install using a NIC on a card rather than a built-in NIC. Identifying Which Network Interface to Use One of the trickiest aspects to this process, and the one that actually requires manual intervention to set up, is identifying how the OBP and Solaris refer to the NIC that we want to use to boot. The OBP already has device aliases configured for the built-in NICs called net, net0, net1, net2, net3. The device alias net typically points to net0 so that when you issue the command "boot net -v install", it uses net0 for the boot. Our task is to figure out the network instance for the NIC we want to use. We will need to get to the OBP console of the system we want to install in order to figure out what the network should be called. I will presume you know how to get to the ok prompt. Once there, we have to see what networks the OBP sees and identify which one is associated with our NIC using the OBP command show-nets. SunOS Release 5.11 Version 11.0 64-bit Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved. {4} ok banner Sun Fire T200, No Keyboard Copyright (c) 1998, 2010, Oracle and/or its affiliates. All rights reserved. OpenBoot 4.30.4.b, 32640 MB memory available, Serial #69057548. Ethernet address 0:14:4f:1d:bc:c, Host ID: 841dbc0c. {4} ok show-nets a) /pci@7c0/pci@0/pci@2/network@0,1 b) /pci@7c0/pci@0/pci@2/network@0 c) /pci@780/pci@0/pci@8/network@0,3 d) /pci@780/pci@0/pci@8/network@0,2 e) /pci@780/pci@0/pci@8/network@0,1 f) /pci@780/pci@0/pci@8/network@0 g) /pci@780/pci@0/pci@1/network@0,1 h) /pci@780/pci@0/pci@1/network@0 q) NO SELECTION Enter Selection, q to quit: d /pci@780/pci@0/pci@8/network@0,2 has been selected. Type ^Y ( Control-Y ) to insert it in the command line. e.g. ok nvalias mydev ^Y for creating devalias mydev for /pci@780/pci@0/pci@8/network@0,2 {4} ok devalias ... net3 /pci@7c0/pci@0/pci@2/network@0,1 net2 /pci@7c0/pci@0/pci@2/network@0 net1 /pci@780/pci@0/pci@1/network@0,1 net0 /pci@780/pci@0/pci@1/network@0 net /pci@780/pci@0/pci@1/network@0 ... name aliases By looking at the devalias and the show-nets output, we can see that our Quad-GbE card must be the device nodes starting with /pci@780/pci@0/pci@8/network@0. The cable for our network is plugged into the 3rd slot, so the device address for our network must be /pci@780/pci@0/pci@8/network@0,2. With that, we can create a device alias for our network interface. Naming the device alias may take a little bit of trial and error, especially in Solaris 11 where the device alias seems to matter more with the new virtualized network stack. So far in my testing, since this is the "next" network interface to be used, I have found success in naming it net4, even though it's a NIC in the middle of a card that might, by rights, be called net6 (assuming the 0th interface on the card is the next interface identified by Solaris and this is the 3rd interface on the card). So, we will call it net4. We need to assign a device alias to it: {4} ok nvalias net4 /pci@780/pci@0/pci@8/network@0,2 {4} ok devalias net4 /pci@780/pci@0/pci@8/network@0,2 ... We also may need to have the MAC for this particular interface, so let's get it, too. To do this, we go to the device and interrogate its properties. {4} ok cd /pci@780/pci@0/pci@8/network@0,2 {4} ok .properties assigned-addresses 82060210 00000000 03000000 00000000 01000000 82060218 00000000 00320000 00000000 00008000 82060220 00000000 00328000 00000000 00008000 82060230 00000000 00600000 00000000 00100000 local-mac-address 00 21 28 20 42 92 phy-type mif ... From this, we can see that the MAC for this interface is 00:21:28:20:42:92. We will need this later. This is all we need to do at the OBP. Now, we can configure Ops Center to use this interface. Network Boot in Solaris 10 Solaris 10 turns out to be a little simpler than Solaris 11 for this sort of a network boot. Since WANBoot in Solaris 10 fetches a specified In order to install the system using Ops Center, it is necessary to create a OS Provisioning profile and its corresponding plan. I am going to presume that you already know how to do this within Ops Center 12c and I will just cover the differences between a regular profile and a profile that can use an alternate interface. Create a OS Provisioning profile for Solaris 10 as usual. However, when you specify the network resources for the primary network, click on the name of the NIC, probably GB_0, and rename it to GB_N/netN, where N is the instance number you used previously in creating the device alias. This is where the trial and error may come into play. You may need to try a few instance numbers before you, the OBP, and Solaris all agree on the instance number. Mark this as the boot network. For Solaris 10, you ought to be able to then apply the OS Provisioning profile to the server and it should install using that interface. And if you put your cards in the same slots and plug the networks into the same NICs, this profile is reusable across multiple servers. Why This Works If you watch the console as Solaris boots during the OSP process, Ops Center is going to look for the device alias netN. Since WANBoot requires a device alias called just net, Ops Center uses the value of your netN device alias and assigns that device to the net alias. That means that boot net will automatically use this device. Very cool! Here's a trace from the console as Ops Center provisions a server: Sun Sun Fire T200, No KeyboardCopyright (c) 1998, 2010, Oracle and/or its affiliates. All rights reserved.OpenBoot 4.30.4.b, 32640 MB memory available, Serial #69057548.Ethernet address 0:14:4f:1d:bc:c, Host ID: 841dbc0c.auto-boot? = false{0} ok {0} ok printenv network-boot-argumentsnetwork-boot-arguments = host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=0100144F1DBC0C,file=http://10.140.204.22:5555/cgi-bin/wanboot-cgi{0} ok {0} ok devalias net net /pci@780/pci@0/pci@1/network@0{0} ok devalias net4 net4 /pci@780/pci@0/pci@8/network@0,2{0} ok devalias net /pci@780/pci@0/pci@8/network@0,2{0} ok setenv network-boot-arguments host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=0100144F1DBC0C,file=http://10.140.204.22:8004/cgi-bin/wanboot-cginetwork-boot-arguments = host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=0100144F1DBC0C,file=http://10.140.204.22:8004/cgi-bin/wanboot-cgi{0} ok {0} ok boot net - installBoot device: /pci@780/pci@0/pci@8/network@0,2 File and args: - install/pci@780/pci@0/pci@8/network@0,2: 1000 Mbps link up<time unavailable> wanboot info: WAN boot messages->console<time unavailable> wanboot info: configuring /pci@780/pci@0/pci@8/network@0,2 See what happened? Ops Center looked for the network device alias called net4 that we specified in the profile, took the value from it, and made it the net device alias for the boot. Pretty cool! WANBoot and Solaris 11 Solaris 11 requires an additional step since the Automated Installer in Solaris 11 uses the MAC address of the network to figure out which manifest to use for system installation. In order to make sure this is available, we have to take an extra step to associate the MAC of the NIC on the card with the host. So, in addition to creating the device alias like we did above, we also have to declare to Ops Center that the host has this new MAC. Declaring the NIC Start out by discovering the hardware as usual. Once you have discovered it, take a look under the Connectivity tab to see what networks it has discovered. In the case of this system, it shows the 4 built-in networks, but not the networks on the additional cards. These are not directly visible to the system controller. In order to add the additional network interface to the hardware asset, it is necessary to Declare it. We will declare that we have a server with this additional NIC, but we will also specify the existing GB_0 network so that Ops Center can associate the right resources together. The GB_0 acts as sort of a key to tie our new declaration to the old system already discovered. Go to the Assets tab, select All Assets, and then in the Actions tab, select Add Asset. Rather than going through a discovery this time, we will manually declare a new asset. When we declare it, we will give the hostname, IP address, system model that match those that have already been discovered. Then, we will declare both GB_0 with its existing MAC and the new GB_4 with its MAC. Remember that we collected the MAC for GB_4 when we created its device alias. After you declare the asset, you will see the new NIC in the connectivity tab for the asset. You will notice that only the NICs you listed when you declared it are seen now. If you want Ops Center to see all of the existing NICs as well as the additional one, declare them as well. Add the other GB_1, GB_2, GB_3 links and their MACs just as you did GB_0 and GB_4. Installing the OS Once you have declared the asset, you can create an OS Provisioning profile for Solaris 11 in the same way that you did for Solaris 10. The only difference from any other provisioning profile you might have created already is the network to use for installation. Again, use GB_N/netN where N is the interface number you used for your device alias and in your declaration. And away you go. When the system boots from the network, the automated installer (AI) is able to see which system manifest to use, based on the new MAC that was associated, and the system gets installed. {0} ok {0} ok printenv network-boot-argumentsnetwork-boot-arguments = host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=01002128204292,file=http://10.140.204.22:5555/cgi-bin/wanboot-cgi{0} ok {0} ok devalias net net /pci@780/pci@0/pci@1/network@0{0} ok devalias net4 net4 /pci@780/pci@0/pci@8/network@0,2{0} ok devalias net /pci@780/pci@0/pci@8/network@0,2{0} ok setenv network-boot-arguments host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=01002128204292,file=http://10.140.204.22:5555/cgi-bin/wanboot-cginetwork-boot-arguments = host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=01002128204292,file=http://10.140.204.22:5555/cgi-bin/wanboot-cgi{0} ok {0} ok boot net - installBoot device: /pci@780/pci@0/pci@8/network@0,2 File and args: - install/pci@780/pci@0/pci@8/network@0,2: 1000 Mbps link up<time unavailable> wanboot info: WAN boot messages->console<time unavailable> wanboot info: configuring /pci@780/pci@0/pci@8/network@0,2...SunOS Release 5.11 Version 11.0 64-bitCopyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.Remounting root read/writeProbing for device nodes ...Preparing network image for useDownloading solaris.zlib--2012-02-17 15:10:17-- http://10.140.204.22:5555/var/js/AI/sparc//solaris.zlibConnecting to 10.140.204.22:5555... connected.HTTP request sent, awaiting response... 200 OKLength: 126752256 (121M) [text/plain]Saving to: `/tmp/solaris.zlib'100%[======================================>] 126,752,256 28.6M/s in 4.4s 2012-02-17 15:10:21 (27.3 MB/s) - `/tmp/solaris.zlib' saved [126752256/126752256] Conclusion So, why go to all of this trouble? More and more, I find that customers are wiring their data center to only use higher speed networks - 10GbE only to the hosts. Some customers are moving aggressively toward consolidated networks combining storage and network on CNA NICs. All of this means that network-based provisioning cannot rely exclusively on the built-in network interfaces. So, it's important to be able to provision a system using other than the built-in networks. Turns out, that this is pretty straight-forward for both Solaris 10 and Solaris 11 and fits into the Ops Center deployment process quite nicely. Hopefully, you will be able to use this as you build out your own private cloud solutions with Ops Center.

Read the article

SQL Developer Q&A from ODTUG Tips & Tricks Webcast

- by thatjeffsmith

Another great webcast yesterday – if you’re a paying member of ODTUG you can watch the show for yourself in their archives. If not, you can get my slide deck off of SlideShare. About 150 of you brave souls sat through an entire hour of me talking and then 10 more minutes of Q&A. We went through everything rapid-fire style, so I thought I would post the questions and my refined answers here for your perusal. In the order in which I received them: You showed the preference to choose between resultsets in same tab or ain a new tab. I understand that we can not have it both using different hotkeys? For example: F5 run and resultset to same tab, ctrl-f5 same but to new tab? Sometimes you want the one other times the other. The questioner is asking about this preference, Tools Preferences Database Worksheet ‘Show query results in new tabs.’ This is an all or nothing proposition. But, there’s another, perhaps better way: the document PINs. If you have a result set you don’t want to lose, ‘pin it.’ Pin multiple result sets or plans for review and comparisons. You mentioned that sometimes it’s hard to remember where a certain preference is. I agree. So enhancement request: add a search-box to the preferences window. Maybe like in, for example, UltraEdit. It shows you all preferences containing your search criteria. Actually, we do have a search mechanism type the search string, we auto-filter the preferences Is there a version of SQL Developer that will connect to an 8i database (Yes, I realize how old that database version is!) Sorry, no. We also don’t have a version that will run on Windows 3.11 for Workgroups…probably. How do we access your blog? Carefully, and with much trepidation. When you’re ready, go to http://www.thatjeffsmith.com Is there a way to get good formatting with predefined settings? I believe the questioner is referring to the script output a la SQL*Plus formatting commands. Yes, there is. You can build your formatting commands into your login.sql script, and those will be applied for your script execution sessions. Example here. Why this version 4.0 doesn’t support external plugins? It does, it just requires the plugin developer to re-factor it for OSGi. This came about when we updated the JDeveloper framework to the later 11g/12c stuff. Any change in hookup with SVN? The only change with Subversion is that internally we’re using 1.7 stuff now. You can use SQLDev to work with a 1.8 SVN server, but if you get a working copy with a 1.8 client SQLDev won’t be able to do anything with it… Command line utilities ? improvements Yes! The long answer is here. Is that a Hint or a Comment?? /*CSV*/ It’s a comment – the database won’t recognize it, but SQLDev does when it goes through our statement pre-processor. We’ll redirect the output through our CSV formatter before displaying the results in the Script Output panel. That’s why this will ONLY work in SQL Developer. Are you selecting “”Run Script”" to get that CSV or HTML output, rather than “”Run Statement”"? Yes, the formatter hints like the CSV one mentioned above only make sense in a script output panel vs a grid. How do you save relational models once they’re defined? I’ve had trouble with setting one up, “”saving”" it, then the design work I did is longer there when loading it later. File – Data Modeler – Save. If you’re running the Modeler inside of SQL Developer, the menu’ing interface can get a bit tricky. That’s why I recommend using the stand along if you’re doing anything with a model that takes more than 5 minutes. See how the Data Modeler menus are folded up under the SQL Dev menus? Can u unplug and plug into another container in a database with only sqldeveloper? Yes, you can ‘Detach’ a multitentant 12c Database ‘pluggable’ and plug it into another instance. You have the option to copy or move the files. This isn’t a trivial operation, pay attention Can you run APEX code directly on the adopter? No, at least not as I understand your question. Give me an example and I can give you a better example. Is there a way that when u click on a particular table it wouldn’t show the table with the info but just to see the columns underneath clicking on the node? Yes, another one of my tips! Disable Tools Preferences Datbase ObjectViewer ‘Open Object on Single Click.’ Is there a patch to allow a double click on a procedure on an open package body to take you to that procedure in the editor? This has been fixed for EA3 – to be released soon. Can you open the spec with the body? You can open the spec or the body, and then also open the other. But you can’t open both with a single click. So if you want you can set it to CSV but can you also see it as a regular result set in rows and then click in the results to export to excel? If you run your query as a statement with Ctrl-Enter, you can send the data to Excel via the Export dialog. Will it do intellisense like using the alias and pop up the column, object names? Yes! You can select more than one column… Can a DBA turn off items from a high level for users so the only thing they can perform would be selects? A DBA should turn things ON, not OFF. Create a user with only CONNECT and required SELECT privs and you’re good to go, regardless of which application they are using. I use PL/SQL Developer from allround automations and was SQL Developer illiterate and now I like this for myself as a DBA. Now I get to train developers on this tool since they have been asking how to use this tool. Thank you. No, THANK YOU! Can you run multi queries in the worksheet after you added it to the worksheet? Yes, highlight what you want to run, and hit Ctrl-Enter. Can you export the result sets to excel, etc. Yes. In version 4.0 and going forward, I recommend you use the XLSX option for exports. It will run faster and consume much, much less memory. Will this be available after the webinar? If you are a ODTUG member, check out the webinar recordings in the archives. That’s worth the $99 right there. Ask your boss if they have $99 in their training budget for you. If not, maybe time to look for another job? Can you run command lines from this tool? Like executes without issuing a command line prompt? Ok, I’m stumped on this one. Not sure what you’re asking. You can setup external tools under the Tools menu, and from there you could probably rig what you’re looking for, but I’m not sure what you’re looking for… This maybe?Where and when to put the program Is there any way to save a copy database command set (certain tables/views etc) in a script? Yes! Create a cart with the objects you want to be used in the Copy. Then use the new command-line interface to kick off SQL Developer to do the copy of those said objects. How can we export the preference and then import them into different or same version of SQL Developer ? Today, there’s no interface for this. But you could copy the files around manually…Kris Rice has a cool idea where you can set your preferences to be saved to your local drop box folder and then you can use SQL Developer from anywhere with the same preferences What happens to SQL*Plus commands like COL & BREAK Nothing. Those are not currently supported. Is there a place where all “”hotkey”" functionality is listed? thanks Yes. Tools – Preferences – Shortcut Keys. And you can change them! Any tips for the DBA side of things? will the SQL generated for objects have more information (e.g. user privileges) in v4? You can get this now. In Tools – Preferences – Database – Utilities – Export, check ‘Grants.’ Voila! You now have the code necessary to recreate your object privileges Is there a limit on the number of rows that could be imported / exported from/to excel ? The only hard-coded limit lies in Excel. For best performance, use v4 and XLSX formats for Exports. Is there a way to see/watch active sessions to see current SQL and the explain plan being used, etc. Kind of like that frog product. Cough, yes. Tools – Monitor Sessions. Click on session, see SQL and plan. The plan was added in v4. If you’re not in version 4, use the Reports – Active Sessions to get the plans. In the DBA section is there a way to manage say tablespaces to add data files, shrink, edit profiles, etc. Yes, we support all of that. View – DBA. Connect, go to the Storage node. Are you (Jeff) available for a live presentation at our Oracle User Group here in Indiana? Maybe. Email me and we’ll see, [email protected] Where do I go to download sql developer 4.0? The Internet of course! Can you directly edit query results? Nope. But what I think you’re asking is, can I edit the data in the tables that are reflected in my query results? You can change the query results by changing your query of course. Or this. Can you show html example? Sure. I’d embed the HTML here, but it’s a lot of code, try it for yourself! How can I quickly close many SQL worksheet windows, but not all? Window – Documents. Multi-select, hit the ‘Close Document(s)’ button. What does the vertical red line denote? That’s the margin. Tells you when you’ve typed too far and it’s time for a carriage return. Did DBA/Database Status/Instance Viewer make it officially into 4.0? It was sort-of included in the first EA. I have NO idea what you’re talking about, WINK-WINK. No, it’s not in v4.0. Is there a “”handy”" way to debug trigger code? Yes, open your trigger. Hit the debug button. Works great as long as it’s a DML trigger. Will you make your presentation file available for us ( in PPT and/or PDF format ) ? It’s on SlideShare. How do you get SqlDeveloper to escape ‘ correctly when you use the wizard to export data as insert statements? If it’s not doing that, it’s a bug. I’ll take a look at that scenario ASAP.

Search Results

Search found 8570 results on 343 pages for 'power saving'.

Page 333/343 | < Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340 | Next Page >

- by edelwater

- by Alex

- by Nick Thissen

- by greyghost24

- by MickyScion

- by Martin Hinshelwood

- by Ricardo Peres

- by IDWMaster

- by SeanMcAlinden

- by dwahlin

- by John-Brown.Evans

- by ScottGu

- by Chris Hoffman

- by Jialiang

- by sreejukg

- by Mat Keep

- by andrewbrust

- by alvonellos

- by Stephen Walther

- by scottdickson

- by thatjeffsmith

< Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340 | Next Page >