Search Results

Search found 8424 results on 337 pages for 'task'.

Page 333/337 | < Previous Page | 329 330 331 332 333 334 335 336 337  | Next Page >

  • Designing for the future

    - by Dennis Vroegop
    User interfaces and user experience design is a fast moving field. It’s something that changes pretty quick: what feels fresh today will look outdated tomorrow. I remember the day I first got a beta version of Windows 95 and I felt swept away by the user interface of the OS. It felt so modern! If I look back now, it feels old. Well, it should: the design is 17 years old which is an eternity in our field. Of course, this is not limited to UI. Same goes for many industries. I want you to think back of the cars that amazed you when you were in your teens (if you are in your teens then this may not apply to you). Didn’t they feel like part of the future? Didn’t you think that this was the ultimate in designs? And aren’t those designs hopelessly outdated today (again, depending on your age, it may just be me)? Let’s review the Win95 design: And let’s compare that to Windows 7: There are so many differences here, I wouldn’t even know where to start explaining them. The general feeling however is one of more usability: studies have shown Windows 7 is much easier to understand for new users than the older versions of Windows did. Of course, experienced Windows users didn’t like it: people are usually afraid of changes and like to stick to what they know. But for new users this was a huge improvement. And that is what UX design is all about: make a product easier to use, with less training required and make users feel more productive. Still, there are areas where this doesn’t hold up. There are plenty examples of designs from the past that are still fresh today. But if you look closely at them, you’ll notice some subtle differences. This differences are what keep the designs fresh. A good example is the signs you’ll find on the road. They haven’t changed much over the years (otherwise people wouldn’t recognize them anymore) but they have been changing gradually to reflect changes in traffic. The same goes for computer interfaces. With each new product or version of a product, the UI and UX is changed gradually. Every now and then however, a bigger change is needed. Just think about the introduction of the Ribbon in Microsoft Office 2007: the whole UI was redesigned. A lot of old users (not in age, but in times of using older versions) didn’t like it a bit, but new users or casual users seem to be more efficient using the product. Which, of course, is exactly the reason behind the changes. I believe that a big engine behind the changes in User Experience design has been the web. In the old days (i.e. before the explosion of the internet) user interface design in Windows applications was limited to choosing the margins between your battleship gray buttons. When the web came along, and especially the web 2.0 where the browsers started to act more and more as application platforms, designers stepped in and made a huge impact. In the browser, they could do whatever they wanted. In the beginning this was limited to the darn blink tag but gradually people really started to think about UX. Even more so: the design of the UI and the whole experience was taken away from the developers and put into the hands of people who knew what they were doing: UX designers. This caused some problems. Everyone who has done a web project in the early 2000’s must have had the same experience: the designers give you a set of Photoshop files and tell you to translate it to HTML. Which, of course, is very hard to do. However, with new tooling and new standards this became much easier. The latest version of HTML and CSS has taken the responsibility for the design away from the developers and placed them in the capable hands of the designers. And that’s where that responsibility belongs, after all, I don’t want a designer to muck around in my c# code just as much as he or she doesn’t want me to poke in the sites style definitions. This change in responsibilities resulted in good looking but more important: better thought out user interfaces in websites. And when websites became more and more interactive, people started to expect the same sort of look and feel from their desktop applications. But that didn’t really happen. Most business applications still have that battleship gray look and feel. Ok, they may use a different color but we’re not talking colors here but usability. Now, you may not be able to read the Dutch captions, but even if you did you wouldn’t understand what was going on. At least, not when you first see it. You have to scan the screen, read all the labels, see how they are related to the other elements on the screen and then figure out what they do. If you’re an experienced user of this application however, this might be a good thing: you know what to do and you get all the information you need in one single screen. But for most applications this isn’t the case. A lot of people only use their computer for a limited time a day (a weird concept for me, but it happens) and need it to get something done and then get on with their lives. For them, a user interface experience like the above isn’t working. (disclaimer: I just picked a screenshot, I am not saying this is bad software but it is an example of about 95% of the Windows applications out there). For the knowledge worker, this isn’t a problem. They use one or two systems and they know exactly what they need to do to achieve their goal. They don’t want any clutter on their screen that distracts them from their task, they just want to be as efficient as possible. When they know the systems they are very productive. The point is, how long does it take to become productive? And: could they be even more productive if the UX was better? Are there things missing that they don’t know about? Are there better ways to achieve what they want to achieve? Also: could a system be designed in such a way that it is not only much more easy to work with but also less tiring? in the example above you need to switch between the keyboard and mouse a lot, something that we now know can be very tiring. The goal of most applications (being client apps or websites on any kind of device) is to provide information. Information is data that when given to the right people, on the right time, in the right place and when it is correct adds value for that person (please, remember that definition: I still hear the statement “the information was wrong” which doesn’t make sense: data can be wrong, information cannot be). So if a system provides data, how can we make sure the chances of becoming information is as high as possible? A good example of a well thought-out system that attempts this is the Zune client. It is a very good application, and I think the UX is much better than it’s main competitor iTunes. Have a look at both: On the left you see the iTunes screenshot, on the right the Zune. As you notice, the Zune screen has more images but less chrome (chrome being visuals not part of the data you want to show, i.e. edges around buttons). The whole thing is text oriented or image oriented, where that text or image is part of the information you need. What is important is big, what’s less important is smaller. Yet, everything you need to know at that point is present and your attention is drawn immediately to what you’re trying to achieve: information about music. You can easily switch between the content on your machine and content on your Zune player but clicking on the image of the player. But if you didn’t know that, you’d find out soon enough: the whole UX is designed in such a way that it invites you to play around. So sooner or later (probably sooner) you’d click on that image and you would see what it does. In the iTunes version it’s harder to find: the discoverability is a lot lower. For inexperienced people the Zune player feels much more natural than the iTunes player, and they get up to speed a lot faster. How does this all work? Why is this UX better? The answer lies in a project from Microsoft with the codename (it seems to be becoming the official name though) “Metro”. Metro is a design language, based on certain principles. When they thought about UX they took a good long look around them and went out in search of metaphors. And they found them. The team noticed that signage in streets, airports, roads, buildings and so on are usually very clear and very precise. These signs give you the information you need and nothing more. It’s simple, clearly understood and fast to understand. A good example are airport signs. Airports can be intimidating places, especially for the non-experienced traveler. In the early 1990’s Amsterdam Airport Schiphol decided to redesign all the signage to make the traveller feel less disoriented. They developed a set of guidelines for signs and implemented those. Soon, most airports around the world adopted these ideas and you see variations of the Dutch signs everywhere on the globe. The signs are text-oriented. Yes, there are icons explaining what it all means for the people who can’t read or don’t understand the language, but the basic sign language is text. It’s clear, it’s high-contrast and it’s easy to understand. One look at the sign and you know where to go. The only thing I don’t like is the green sign pointing to the emergency exit, but since this is the default style for emergency exits I understand why they did this. If you look at the Zune UI again, you’ll notice the similarities. Text oriented, little or no icons, clear usage of fonts and all the information you need. This design language has a set of principles: Clean, light, open and fast Content, not chrome Soulful and alive These are just a couple of the principles, you can read the whole philosophy behind Metro for Windows Phone 7 here. These ideas seem to work. I love my Windows Phone 7. It’s easy to use, it’s clear, there’s no clutter that I do not need. It works for me. And I noticed it works for a lot of other people as well, especially people who aren’t as proficient with computers as I am. You see these ideas in a lot other places. Corning, a manufacturer of glass, has made a video of possible usages of their products. It’s their glimpse into the future. You’ll notice that a lot of the UI in the screens look a lot like what Microsoft is doing with Metro (not coincidentally Corning is the supplier for the Gorilla glass display surface on the new SUR40 device (or Surface v2.0 as a lot of people call it)). The idea behind this vision is that data should be available everywhere where you it. Systems should be available at all times and data is presented in a clear and light manner so that you can turn that data into information. You don’t need a lot of fancy animations that only distract from the data. You want the data and you want it fast. Have a look at this truly inspiring video that made: This is what I believe the future will look like. Of course, not everything is possible, or even desirable. But it is a nice way to think about the future . I feel very strongly about designing applications in such a way that they add value to the user. Designing applications that turn data into information. Applications that make the user feel happy to use them. So… when are you going to drop the battleship-gray designs? Tags van Technorati: surface,design,windows phone 7,wp7,metro

    Read the article

  • MySQL died during the night on a 12.04.1 Ubuntu

    - by Olivier
    I can't explain why, but somehow during the night, one of my MySQL running on an Ubuntu 12.04.1 box broke. The service is running but I can't login anymore (to SQL), the previous password is not working anymore. It does not looks like the server has been compromised (nothing in /var/auth.log) It looks like some automatic security upgrade (server is configured to perform those) has occured and broke something. The MySQL server has restarted a couple of times in the logs at the time errors started to happen (I get email when CRON task fail). In the logs it complains about an unset root password (I do have cron job running all day using SQL so the password was set & working for months). Anyway I can't login without password either! Do you have any idea of what could have happened? How do I get my databases back? This line looks strange : Nov 6 06:36:12 ns398758 mysqld_safe[6676]: ERROR: 1064 You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'ALTER TABLE user ADD column Show_view_priv enum('N','Y') CHARACTER SET utf8 NOT ' at line 1 Here is the full log below : Nov 6 06:36:06 ns398758 mysqld_safe[6586]: Nov 6 06:36:06 ns398758 mysqld_safe[6586]: PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER ! Nov 6 06:36:06 ns398758 mysqld_safe[6586]: To do so, start the server, then issue the following commands: Nov 6 06:36:06 ns398758 mysqld_safe[6586]: Nov 6 06:36:06 ns398758 mysqld_safe[6586]: /usr/bin/mysqladmin -u root password 'new-password' Nov 6 06:36:06 ns398758 mysqld_safe[6586]: /usr/bin/mysqladmin -u root -h ns398758.ovh.net password 'new-password' Nov 6 06:36:06 ns398758 mysqld_safe[6586]: Nov 6 06:36:06 ns398758 mysqld_safe[6586]: Alternatively you can run: Nov 6 06:36:06 ns398758 mysqld_safe[6586]: /usr/bin/mysql_secure_installation Nov 6 06:36:06 ns398758 mysqld_safe[6586]: Nov 6 06:36:06 ns398758 mysqld_safe[6586]: which will also give you the option of removing the test Nov 6 06:36:06 ns398758 mysqld_safe[6586]: databases and anonymous user created by default. This is Nov 6 06:36:06 ns398758 mysqld_safe[6586]: strongly recommended for production servers. Nov 6 06:36:06 ns398758 mysqld_safe[6586]: Nov 6 06:36:06 ns398758 mysqld_safe[6586]: See the manual for more instructions. Nov 6 06:36:06 ns398758 mysqld_safe[6586]: Nov 6 06:36:06 ns398758 mysqld_safe[6586]: Please report any problems with the /usr/scripts/mysqlbug script! Nov 6 06:36:06 ns398758 mysqld_safe[6586]: Nov 6 06:36:06 ns398758 mysqld_safe[6632]: 121106 6:36:06 [Note] Plugin 'FEDERATED' is disabled. Nov 6 06:36:06 ns398758 mysqld_safe[6632]: 121106 6:36:06 InnoDB: The InnoDB memory heap is disabled Nov 6 06:36:06 ns398758 mysqld_safe[6632]: 121106 6:36:06 InnoDB: Mutexes and rw_locks use GCC atomic builtins Nov 6 06:36:06 ns398758 mysqld_safe[6632]: 121106 6:36:06 InnoDB: Compressed tables use zlib 1.2.3.4 Nov 6 06:36:06 ns398758 mysqld_safe[6632]: 121106 6:36:06 InnoDB: Initializing buffer pool, size = 128.0M Nov 6 06:36:06 ns398758 mysqld_safe[6632]: 121106 6:36:06 InnoDB: Completed initialization of buffer pool Nov 6 06:36:06 ns398758 mysqld_safe[6632]: 121106 6:36:06 InnoDB: highest supported file format is Barracuda. Nov 6 06:36:07 ns398758 mysqld_safe[6632]: 121106 6:36:07 InnoDB: Waiting for the background threads to start Nov 6 06:36:08 ns398758 mysqld_safe[6632]: 121106 6:36:08 InnoDB: 1.1.8 started; log sequence number 29276459701 Nov 6 06:36:08 ns398758 mysqld_safe[6632]: 121106 6:36:08 InnoDB: Starting shutdown... Nov 6 06:36:09 ns398758 mysqld_safe[6632]: 121106 6:36:09 InnoDB: Shutdown completed; log sequence number 29276459701 Nov 6 06:36:11 ns398758 mysqld_safe[6676]: 121106 6:36:11 [Note] Plugin 'FEDERATED' is disabled. Nov 6 06:36:11 ns398758 mysqld_safe[6676]: 121106 6:36:11 InnoDB: The InnoDB memory heap is disabled Nov 6 06:36:11 ns398758 mysqld_safe[6676]: 121106 6:36:11 InnoDB: Mutexes and rw_locks use GCC atomic builtins Nov 6 06:36:11 ns398758 mysqld_safe[6676]: 121106 6:36:11 InnoDB: Compressed tables use zlib 1.2.3.4 Nov 6 06:36:11 ns398758 mysqld_safe[6676]: 121106 6:36:11 InnoDB: Initializing buffer pool, size = 128.0M Nov 6 06:36:11 ns398758 mysqld_safe[6676]: 121106 6:36:11 InnoDB: Completed initialization of buffer pool Nov 6 06:36:11 ns398758 mysqld_safe[6676]: 121106 6:36:11 InnoDB: highest supported file format is Barracuda. Nov 6 06:36:11 ns398758 mysqld_safe[6676]: 121106 6:36:11 InnoDB: Waiting for the background threads to start Nov 6 06:36:12 ns398758 mysqld_safe[6676]: 121106 6:36:12 InnoDB: 1.1.8 started; log sequence number 29276459701 Nov 6 06:36:12 ns398758 mysqld_safe[6676]: ERROR: 1064 You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'ALTER TABLE user ADD column Show_view_priv enum('N','Y') CHARACTER SET utf8 NOT ' at line 1 Nov 6 06:36:12 ns398758 mysqld_safe[6676]: 121106 6:36:12 [ERROR] Aborting Nov 6 06:36:12 ns398758 mysqld_safe[6676]: Nov 6 06:36:12 ns398758 mysqld_safe[6676]: 121106 6:36:12 InnoDB: Starting shutdown... Nov 6 06:36:13 ns398758 mysqld_safe[6676]: 121106 6:36:13 InnoDB: Shutdown completed; log sequence number 29276459701 Nov 6 06:36:13 ns398758 mysqld_safe[6676]: 121106 6:36:13 [Note] /usr/sbin/mysqld: Shutdown complete Nov 6 06:36:13 ns398758 mysqld_safe[6676]: Nov 6 06:36:13 ns398758 mysqld_safe[6697]: 121106 6:36:13 [Note] Plugin 'FEDERATED' is disabled. Nov 6 06:36:13 ns398758 mysqld_safe[6697]: 121106 6:36:13 InnoDB: The InnoDB memory heap is disabled Nov 6 06:36:13 ns398758 mysqld_safe[6697]: 121106 6:36:13 InnoDB: Mutexes and rw_locks use GCC atomic builtins Nov 6 06:36:13 ns398758 mysqld_safe[6697]: 121106 6:36:13 InnoDB: Compressed tables use zlib 1.2.3.4 Nov 6 06:36:13 ns398758 mysqld_safe[6697]: 121106 6:36:13 InnoDB: Initializing buffer pool, size = 128.0M Nov 6 06:36:13 ns398758 mysqld_safe[6697]: 121106 6:36:13 InnoDB: Completed initialization of buffer pool Nov 6 06:36:13 ns398758 mysqld_safe[6697]: 121106 6:36:13 InnoDB: highest supported file format is Barracuda. Nov 6 06:36:13 ns398758 mysqld_safe[6697]: 121106 6:36:13 InnoDB: Waiting for the background threads to start Nov 6 06:36:14 ns398758 mysqld_safe[6697]: 121106 6:36:14 InnoDB: 1.1.8 started; log sequence number 29276459701 Nov 6 06:36:14 ns398758 mysqld_safe[6697]: 121106 6:36:14 InnoDB: Starting shutdown... Nov 6 06:36:15 ns398758 mysqld_safe[6697]: 121106 6:36:15 InnoDB: Shutdown completed; log sequence number 29276459701 Nov 6 06:36:15 ns398758 mysqld_safe[6718]: 121106 6:36:15 [Note] Plugin 'FEDERATED' is disabled. Nov 6 06:36:15 ns398758 mysqld_safe[6718]: 121106 6:36:15 InnoDB: The InnoDB memory heap is disabled Nov 6 06:36:15 ns398758 mysqld_safe[6718]: 121106 6:36:15 InnoDB: Mutexes and rw_locks use GCC atomic builtins Nov 6 06:36:15 ns398758 mysqld_safe[6718]: 121106 6:36:15 InnoDB: Compressed tables use zlib 1.2.3.4 Nov 6 06:36:15 ns398758 mysqld_safe[6718]: 121106 6:36:15 InnoDB: Initializing buffer pool, size = 128.0M Nov 6 06:36:15 ns398758 mysqld_safe[6718]: 121106 6:36:15 InnoDB: Completed initialization of buffer pool Nov 6 06:36:15 ns398758 mysqld_safe[6718]: 121106 6:36:15 InnoDB: highest supported file format is Barracuda. Nov 6 06:36:15 ns398758 mysqld_safe[6718]: 121106 6:36:15 InnoDB: Waiting for the background threads to start Nov 6 06:36:16 ns398758 mysqld_safe[6718]: 121106 6:36:16 InnoDB: 1.1.8 started; log sequence number 29276459701 Nov 6 06:36:16 ns398758 mysqld_safe[6718]: ERROR: 1050 Table 'plugin' already exists Nov 6 06:36:16 ns398758 mysqld_safe[6718]: 121106 6:36:16 [ERROR] Aborting Nov 6 06:36:16 ns398758 mysqld_safe[6718]: Nov 6 06:36:16 ns398758 mysqld_safe[6718]: 121106 6:36:16 InnoDB: Starting shutdown... Nov 6 06:36:17 ns398758 mysqld_safe[6718]: 121106 6:36:17 InnoDB: Shutdown completed; log sequence number 29276459701 Nov 6 06:36:17 ns398758 mysqld_safe[6718]: 121106 6:36:17 [Note] /usr/sbin/mysqld: Shutdown complete Nov 6 06:36:17 ns398758 mysqld_safe[6718]: Nov 6 06:36:19 ns398758 /etc/mysql/debian-start[6816]: Upgrading MySQL tables if necessary. Nov 6 06:36:20 ns398758 /etc/mysql/debian-start[6819]: /usr/bin/mysql_upgrade: the '--basedir' option is always ignored Nov 6 06:36:20 ns398758 /etc/mysql/debian-start[6819]: Looking for 'mysql' as: /usr/bin/mysql Nov 6 06:36:20 ns398758 /etc/mysql/debian-start[6819]: Looking for 'mysqlcheck' as: /usr/bin/mysqlcheck Nov 6 06:36:20 ns398758 /etc/mysql/debian-start[6819]: Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' '--host=localhost' '--socket=/var/run/mysqld/mysqld.sock' '--host=localhost' '--socket=/var/run/mysqld/mysqld.sock' Nov 6 06:36:20 ns398758 /etc/mysql/debian-start[6819]: Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' '--host=localhost' '--socket=/var/run/mysqld/mysqld.sock' '--host=localhost' '--socket=/var/run/mysqld/mysqld.sock' Nov 6 06:36:20 ns398758 /etc/mysql/debian-start[6819]: col_digitas.acos OK Nov 6 06:36:20 ns398758 /etc/mysql/debian-start[6819]: col_digitas.aros OK ...

    Read the article

  • The Inkremental Architect&acute;s Napkin - #4 - Make increments tangible

    - by Ralf Westphal
    Originally posted on: http://geekswithblogs.net/theArchitectsNapkin/archive/2014/06/12/the-inkremental-architectacutes-napkin---4---make-increments-tangible.aspxThe driver of software development are increments, small increments, tiny increments. With an increment being a slice of the overall requirement scope thin enough to implement and get feedback from a product owner within 2 days max. Such an increment might concern Functionality or Quality.[1] To make such high frequency delivery of increments possible, the transition from talking to coding needs to be as easy as possible. A user story or some other documentation of what´s supposed to get implemented until tomorrow evening at latest is one side of the medal. The other is where to put the logic in all of the code base. To implement an increment, only logic statements are needed. Functionality like Quality are just about expressions and control flow statements. Think of Assembler code without the CALL/RET instructions. That´s all is needed. Forget about functions, forget about classes. To make a user happy none of that is really needed. It´s just about the right expressions and conditional executions paths plus some memory allocation. Automatic function inlining of compilers which makes it clear how unimportant functions are for delivering value to users at runtime. But why then are there functions? Because they were invented for optimization purposes. We need them for better Evolvability and Production Efficiency. Nothing more, nothing less. No software has become faster, more secure, more scalable, more functional because we gathered logic under the roof of a function or two or a thousand. Functions make logic easier to understand. Functions make us faster in producing logic. Functions make it easier to keep logic consistent. Functions help to conserve memory. That said, functions are important. They are even the pivotal element of software development. We can´t code without them - whether you write a function yourself or not. Because there´s always at least one function in play: the Entry Point of a program. In Ruby the simplest program looks like this:puts "Hello, world!" In C# more is necessary:class Program { public static void Main () { System.Console.Write("Hello, world!"); } } C# makes the Entry Point function explicit, not so Ruby. But still it´s there. So you can think of logic always running in some function. Which brings me back to increments: In order to make the transition from talking to code as easy as possible, it has to be crystal clear into which function you should put the logic. Product owners might be content once there is a sticky note a user story on the Scrum or Kanban board. But developers need an idea of what that sticky note means in term of functions. Because with a function in hand, with a signature to run tests against, they have something to focus on. All´s well once there is a function behind whose signature logic can be piled up. Then testing frameworks can be used to check if the logic is correct. Then practices like TDD can help to drive the implementation. That´s why most code katas define exactly how the API of a solution should look like. It´s a function, maybe two or three, not more. A requirement like “Write a function f which takes this as parameters and produces such and such output by doing x” makes a developer comfortable. Yes, there are all kinds of details to think about, like which algorithm or technology to use, or what kind of state and side effects to consider. Even a single function not only must deliver on Functionality, but also on Quality and Evolvability. Nevertheless, once it´s clear which function to put logic in, you have a tangible starting point. So, yes, what I´m suggesting is to find a single function to put all the logic in that´s necessary to deliver on a the requirements of an increment. Or to put it the other way around: Slice requirements in a way that each increment´s logic can be located under the roof of a single function. Entry points Of course, the logic of a software will always be spread across many, many functions. But there´s always an Entry Point. That´s the most important function for each increment, because that´s the root to put integration or even acceptance tests on. A batch program like the above hello-world application only has a single Entry Point. All logic is reached from there, regardless how deep it´s nested in classes. But a program with a user interface like this has at least two Entry Points: One is the main function called upon startup. The other is the button click event handler for “Show my score”. But maybe there are even more, like another Entry Point being a handler for the event fired when one of the choices gets selected; because then some logic could check if the button should be enabled because all questions got answered. Or another Entry Point for the logic to be executed when the program is close; because then the choices made should be persisted. You see, an Entry Point to me is a function which gets triggered by the user of a software. With batch programs that´s the main function. With GUI programs on the desktop that´s event handlers. With web programs that´s handlers for URL routes. And my basic suggestion to help you with slicing requirements for Spinning is: Slice them in a way so that each increment is related to only one Entry Point function.[2] Entry Points are the “outer functions” of a program. That´s where the environment triggers behavior. That´s where hardware meets software. Entry points always get called because something happened to hardware state, e.g. a key was pressed, a mouse button clicked, the system timer ticked, data arrived over a wire.[3] Viewed from the outside, software is just a collection of Entry Point functions made accessible via buttons to press, menu items to click, gestures, URLs to open, keys to enter. Collections of batch processors I´d thus say, we haven´t moved forward since the early days of software development. We´re still writing batch programs. Forget about “event-driven programming” with its fancy GUI applications. Software is just a collection of batch processors. Earlier it was just one per program, today it´s hundreds we bundle up into applications. Each batch processor is represented by an Entry Point as its root that works on a number of resources from which it reads data to process and to which it writes results. These resources can be the keyboard or main memory or a hard disk or a communication line or a display. Together many batch processors - large and small - form applications the user perceives as a single whole: Software development that way becomes quite simple: just implement one batch processor after another. Well, at least in principle ;-) Features Each batch processor entered through an Entry Point delivers value to the user. It´s an increment. Sometimes its logic is trivial, sometimes it´s very complex. Regardless, each Entry Point represents an increment. An Entry Point implemented thus is a step forward in terms of Agility. At the same time it´s a tangible unit for developers. Therefore, identifying the more or less numerous batch processors in a software system is a rewarding task for product owners and developers alike. That´s where user stories meet code. In this example the user story translates to the Entry Point triggered by clicking the login button on a dialog like this: The batch then retrieves what has been entered via keyboard, loads data from a user store, and finally outputs some kind of response on the screen, e.g. by displaying an error message or showing the next dialog. This is all very simple, but you see, there is not just one thing happening, but several. Get input (email address, password) Load user for email address If user not found report error Check password Hash password Compare hash to hash stored in user Show next dialog Viewed from 10,000 feet it´s all done by the Entry Point function. And of course that´s technically possible. It´s just a bunch of logic and calling a couple of API functions. However, I suggest to take these steps as distinct aspects of the overall requirement described by the user story. Such aspects of requirements I call Features. Features too are increments. Each provides some (small) value of its own to the user. Each can be checked individually by a product owner. Instead of implementing all the logic behind the Login() entry point at once you can move forward increment by increment, e.g. First implement the dialog, let the user enter any credentials, and log him/her in without any checks. Features 1 and 4. Then hard code a single user and check the email address. Features 2 and 2.1. Then check password without hashing it (or use a very simple hash like the length of the password). Features 3. and 3.2 Replace hard coded user with a persistent user directoy, but a very simple one, e.g. a CSV file. Refinement of feature 2. Calculate the real hash for the password. Feature 3.1. Switch to the final user directory technology. Each feature provides an opportunity to deliver results in a short amount of time and get feedback. If you´re in doubt whether you can implement the whole entry point function until tomorrow night, then just go for a couple of features or even just one. That´s also why I think, you should strive for wrapping feature logic into a function of its own. It´s a matter of Evolvability and Production Efficiency. A function per feature makes the code more readable, since the language of requirements analysis and design is carried over into implementation. It makes it easier to apply changes to features because it´s clear where their logic is located. And finally, of course, it lets you re-use features in different context (read: increments). Feature functions make it easier for you to think of features as Spinning increments, to implement them independently, to let the product owner check them for acceptance individually. Increments consist of features, entry point functions consist of feature functions. So you can view software as a hierarchy of requirements from broad to thin which map to a hierarchy of functions - with entry points at the top.   I like this image of software as a self-similar structure on many levels of abstraction where requirements and code match each other. That to me is true agile design: the core tenet of Agility to move forward in increments is carried over into implementation. Increments on paper are retained in code. This way developers can easily relate to product owners. Elusive and fuzzy requirements are not tangible. Software production is moving forward through requirements one increment at a time, and one function at a time. In closing Product owners and developers are different - but they need to work together towards a shared goal: working software. So their notions of software need to be made compatible, they need to be connected. The increments of the product owner - user stories and features - need to be mapped straightforwardly to something which is relevant to developers. To me that´s functions. Yes, functions, not classes nor components nor micro services. We´re talking about behavior, actions, activities, processes. Their natural representation is a function. Something has to be done. Logic has to be executed. That´s the purpose of functions. Later, classes and other containers are needed to stay on top of a growing amount of logic. But to connect developers and product owners functions are the appropriate glue. Functions which represent increments. Can there always be such a small increment be found to deliver until tomorrow evening? I boldly say yes. Yes, it´s always possible. But maybe you´ve to start thinking differently. Maybe the product owner needs to start thinking differently. Completion is not the goal anymore. Neither is checking the delivery of an increment through the user interface of a software. Product owners need to become comfortable using test beds for certain features. If it´s hard to slice requirements thin enough for Spinning the reason is too little knowledge of something. Maybe you don´t yet understand the problem domain well enough? Maybe you don´t yet feel comfortable with some tool or technology? Then it´s time to acknowledge this fact. Be honest about your not knowing. And instead of trying to deliver as a craftsman officially become a researcher. Research an check back with the product owner every day - until your understanding has grown to a level where you are able to define the next Spinning increment. ? Sometimes even thin requirement slices will cover several Entry Points, like “Add validation of email addresses to all relevant dialogs.” Validation then will it put into a dozen functons. Still, though, it´s important to determine which Entry Points exactly get affected. That´s much easier, if strive for keeping the number of Entry Points per increment to 1. ? If you like call Entry Point functions event handlers, because that´s what they are. They all handle events of some kind, whether that´s palpable in your code or note. A public void btnSave_Click(object sender, EventArgs e) {…} might look like an event handler to you, but public static void Main() {…} is one also - for then event “program started”. ?

    Read the article

  • SQL Server &ndash; Undelete a Table and Restore a Single Table from Backup

    - by Mladen Prajdic
    This post is part of the monthly community event called T-SQL Tuesday started by Adam Machanic (blog|twitter) and hosted by someone else each month. This month the host is Sankar Reddy (blog|twitter) and the topic is Misconceptions in SQL Server. You can follow posts for this theme on Twitter by looking at #TSQL2sDay hashtag. Let me start by saying: This code is a crazy hack that is to never be used unless you really, really have to. Really! And I don’t think there’s a time when you would really have to use it for real. Because it’s a hack there are number of things that can go wrong so play with it knowing that. I’ve managed to totally corrupt one database. :) Oh… and for those saying: yeah yeah.. you have a single table in a file group and you’re restoring that, I say “nay nay” to you. As we all know SQL Server can’t do single table restores from backup. This is kind of a obvious thing due to different relational integrity (RI) concerns. Since we have to maintain that we have to restore all tables represented in a RI graph. For this exercise i say BAH! to those concerns. Note that this method “works” only for simple tables that don’t have LOB and off rows data. The code can be expanded to include those but I’ve tried to leave things “simple”. Note that for this to work our table needs to be relatively static data-wise. This doesn’t work for OLTP table. Products are a perfect example of static data. They don’t change much between backups, pretty much everything depends on them and their table is one of those tables that are relatively easy to accidentally delete everything from. This only works if the database is in Full or Bulk-Logged recovery mode for tables where the contents have been deleted or truncated but NOT when a table was dropped. Everything we’ll talk about has to be done before the data pages are reused for other purposes. After deletion or truncation the pages are marked as reusable so you have to act fast. The best thing probably is to put the database into single user mode ASAP while you’re performing this procedure and return it to multi user after you’re done. How do we do it? We will be using an undocumented but known DBCC commands: DBCC PAGE, an undocumented function sys.fn_dblog and a little known DATABASE RESTORE PAGE option. All tests will be on a copy of Production.Product table in AdventureWorks database called Production.Product1 because the original table has FK constraints that prevent us from truncating it for testing. -- create a duplicate table. This doesn't preserve indexes!SELECT *INTO AdventureWorks.Production.Product1FROM AdventureWorks.Production.Product   After we run this code take a full back to perform further testing.   First let’s see what the difference between DELETE and TRUNCATE is when it comes to logging. With DELETE every row deletion is logged in the transaction log. With TRUNCATE only whole data page deallocations are logged in the transaction log. Getting deleted data pages is simple. All we have to look for is row delete entry in the sys.fn_dblog output. But getting data pages that were truncated from the transaction log presents a bit of an interesting problem. I will not go into depths of IAM(Index Allocation Map) and PFS (Page Free Space) pages but suffice to say that every IAM page has intervals that tell us which data pages are allocated for a table and which aren’t. If we deep dive into the sys.fn_dblog output we can see that once you truncate a table all the pages in all the intervals are deallocated and this is shown in the PFS page transaction log entry as deallocation of pages. For every 8 pages in the same extent there is one PFS page row in the transaction log. This row holds information about all 8 pages in CSV format which means we can get to this data with some parsing. A great help for parsing this stuff is Peter Debetta’s handy function dbo.HexStrToVarBin that converts hexadecimal string into a varbinary value that can be easily converted to integer tus giving us a readable page number. The shortened (columns removed) sys.fn_dblog output for a PFS page with CSV data for 1 extent (8 data pages) looks like this: -- [Page ID] is displayed in hex format. -- To convert it to readable int we'll use dbo.HexStrToVarBin function found at -- http://sqlblog.com/blogs/peter_debetta/archive/2007/03/09/t-sql-convert-hex-string-to-varbinary.aspx -- This function must be installed in the master databaseSELECT Context, AllocUnitName, [Page ID], DescriptionFROM sys.fn_dblog(NULL, NULL)WHERE [Current LSN] = '00000031:00000a46:007d' The pages at the end marked with 0x00—> are pages that are allocated in the extent but are not part of a table. We can inspect the raw content of each data page with a DBCC PAGE command: -- we need this trace flag to redirect output to the query window.DBCC TRACEON (3604); -- WITH TABLERESULTS gives us data in table format instead of message format-- we use format option 3 because it's the easiest to read and manipulate further onDBCC PAGE (AdventureWorks, 1, 613, 3) WITH TABLERESULTS   Since the DBACC PAGE output can be quite extensive I won’t put it here. You can see an example of it in the link at the beginning of this section. Getting deleted data back When we run a delete statement every row to be deleted is marked as a ghost record. A background process periodically cleans up those rows. A huge misconception is that the data is actually removed. It’s not. Only the pointers to the rows are removed while the data itself is still on the data page. We just can’t access it with normal means. To get those pointers back we need to restore every deleted page using the RESTORE PAGE option mentioned above. This restore must be done from a full backup, followed by any differential and log backups that you may have. This is necessary to bring the pages up to the same point in time as the rest of the data.  However the restore doesn’t magically connect the restored page back to the original table. It simply replaces the current page with the one from the backup. After the restore we use the DBCC PAGE to read data directly from all data pages and insert that data into a temporary table. To finish the RESTORE PAGE  procedure we finally have to take a tail log backup (simple backup of the transaction log) and restore it back. We can now insert data from the temporary table to our original table by hand. Getting truncated data back When we run a truncate the truncated data pages aren’t touched at all. Even the pointers to rows stay unchanged. Because of this getting data back from truncated table is simple. we just have to find out which pages belonged to our table and use DBCC PAGE to read data off of them. No restore is necessary. Turns out that the problems we had with finding the data pages is alleviated by not having to do a RESTORE PAGE procedure. Stop stalling… show me The Code! This is the code for getting back deleted and truncated data back. It’s commented in all the right places so don’t be afraid to take a closer look. Make sure you have a full backup before trying this out. Also I suggest that the last step of backing and restoring the tail log is performed by hand. USE masterGOIF OBJECT_ID('dbo.HexStrToVarBin') IS NULL RAISERROR ('No dbo.HexStrToVarBin installed. Go to http://sqlblog.com/blogs/peter_debetta/archive/2007/03/09/t-sql-convert-hex-string-to-varbinary.aspx and install it in master database' , 18, 1) SET NOCOUNT ONBEGIN TRY DECLARE @dbName VARCHAR(1000), @schemaName VARCHAR(1000), @tableName VARCHAR(1000), @fullBackupName VARCHAR(1000), @undeletedTableName VARCHAR(1000), @sql VARCHAR(MAX), @tableWasTruncated bit; /* THE FIRST LINE ARE OUR INPUT PARAMETERS In this case we're trying to recover Production.Product1 table in AdventureWorks database. My full backup of AdventureWorks database is at e:\AW.bak */ SELECT @dbName = 'AdventureWorks', @schemaName = 'Production', @tableName = 'Product1', @fullBackupName = 'e:\AW.bak', @undeletedTableName = '##' + @tableName + '_Undeleted', @tableWasTruncated = 0, -- copy the structure from original table to a temp table that we'll fill with restored data @sql = 'IF OBJECT_ID(''tempdb..' + @undeletedTableName + ''') IS NOT NULL DROP TABLE ' + @undeletedTableName + ' SELECT *' + ' INTO ' + @undeletedTableName + ' FROM [' + @dbName + '].[' + @schemaName + '].[' + @tableName + ']' + ' WHERE 1 = 0' EXEC (@sql) IF OBJECT_ID('tempdb..#PagesToRestore') IS NOT NULL DROP TABLE #PagesToRestore /* FIND DATA PAGES WE NEED TO RESTORE*/ CREATE TABLE #PagesToRestore ([ID] INT IDENTITY(1,1), [FileID] INT, [PageID] INT, [SQLtoExec] VARCHAR(1000)) -- DBCC PACE statement to run later RAISERROR ('Looking for deleted pages...', 10, 1) -- use T-LOG direct read to get deleted data pages INSERT INTO #PagesToRestore([FileID], [PageID], [SQLtoExec]) EXEC('USE [' + @dbName + '];SELECT FileID, PageID, ''DBCC TRACEON (3604); DBCC PAGE ([' + @dbName + '], '' + FileID + '', '' + PageID + '', 3) WITH TABLERESULTS'' as SQLToExecFROM (SELECT DISTINCT LEFT([Page ID], 4) AS FileID, CONVERT(VARCHAR(100), ' + 'CONVERT(INT, master.dbo.HexStrToVarBin(SUBSTRING([Page ID], 6, 20)))) AS PageIDFROM sys.fn_dblog(NULL, NULL)WHERE AllocUnitName LIKE ''%' + @schemaName + '.' + @tableName + '%'' ' + 'AND Context IN (''LCX_MARK_AS_GHOST'', ''LCX_HEAP'') AND Operation in (''LOP_DELETE_ROWS''))t');SELECT *FROM #PagesToRestore -- if upper EXEC returns 0 rows it means the table was truncated so find truncated pages IF (SELECT COUNT(*) FROM #PagesToRestore) = 0 BEGIN RAISERROR ('No deleted pages found. Looking for truncated pages...', 10, 1) -- use T-LOG read to get truncated data pages INSERT INTO #PagesToRestore([FileID], [PageID], [SQLtoExec]) -- dark magic happens here -- because truncation simply deallocates pages we have to find out which pages were deallocated. -- we can find this out by looking at the PFS page row's Description column. -- for every deallocated extent the Description has a CSV of 8 pages in that extent. -- then it's just a matter of parsing it. -- we also remove the pages in the extent that weren't allocated to the table itself -- marked with '0x00-->00' EXEC ('USE [' + @dbName + '];DECLARE @truncatedPages TABLE(DeallocatedPages VARCHAR(8000), IsMultipleDeallocs BIT);INSERT INTO @truncatedPagesSELECT REPLACE(REPLACE(Description, ''Deallocated '', ''Y''), ''0x00-->00 '', ''N'') + '';'' AS DeallocatedPages, CHARINDEX('';'', Description) AS IsMultipleDeallocsFROM (SELECT DISTINCT LEFT([Page ID], 4) AS FileID, CONVERT(VARCHAR(100), CONVERT(INT, master.dbo.HexStrToVarBin(SUBSTRING([Page ID], 6, 20)))) AS PageID, DescriptionFROM sys.fn_dblog(NULL, NULL)WHERE Context IN (''LCX_PFS'') AND Description LIKE ''Deallocated%'' AND AllocUnitName LIKE ''%' + @schemaName + '.' + @tableName + '%'') t;SELECT FileID, PageID , ''DBCC TRACEON (3604); DBCC PAGE ([' + @dbName + '], '' + FileID + '', '' + PageID + '', 3) WITH TABLERESULTS'' as SQLToExecFROM (SELECT LEFT(PageAndFile, 1) as WasPageAllocatedToTable , SUBSTRING(PageAndFile, 2, CHARINDEX('':'', PageAndFile) - 2 ) as FileID , CONVERT(VARCHAR(100), CONVERT(INT, master.dbo.HexStrToVarBin(SUBSTRING(PageAndFile, CHARINDEX('':'', PageAndFile) + 1, LEN(PageAndFile))))) as PageIDFROM ( SELECT SUBSTRING(DeallocatedPages, delimPosStart, delimPosEnd - delimPosStart) as PageAndFile, IsMultipleDeallocs FROM ( SELECT *, CHARINDEX('';'', DeallocatedPages)*(N-1) + 1 AS delimPosStart, CHARINDEX('';'', DeallocatedPages)*N AS delimPosEnd FROM @truncatedPages t1 CROSS APPLY (SELECT TOP (case when t1.IsMultipleDeallocs = 1 then 8 else 1 end) ROW_NUMBER() OVER(ORDER BY number) as N FROM master..spt_values) t2 )t)t)tWHERE WasPageAllocatedToTable = ''Y''') SELECT @tableWasTruncated = 1 END DECLARE @lastID INT, @pagesCount INT SELECT @lastID = 1, @pagesCount = COUNT(*) FROM #PagesToRestore SELECT @sql = 'Number of pages to restore: ' + CONVERT(VARCHAR(10), @pagesCount) IF @pagesCount = 0 RAISERROR ('No data pages to restore.', 18, 1) ELSE RAISERROR (@sql, 10, 1) -- If the table was truncated we'll read the data directly from data pages without restoring from backup IF @tableWasTruncated = 0 BEGIN -- RESTORE DATA PAGES FROM FULL BACKUP IN BATCHES OF 200 WHILE @lastID <= @pagesCount BEGIN -- create CSV string of pages to restore SELECT @sql = STUFF((SELECT ',' + CONVERT(VARCHAR(100), FileID) + ':' + CONVERT(VARCHAR(100), PageID) FROM #PagesToRestore WHERE ID BETWEEN @lastID AND @lastID + 200 ORDER BY ID FOR XML PATH('')), 1, 1, '') SELECT @sql = 'RESTORE DATABASE [' + @dbName + '] PAGE = ''' + @sql + ''' FROM DISK = ''' + @fullBackupName + '''' RAISERROR ('Starting RESTORE command:' , 10, 1) WITH NOWAIT; RAISERROR (@sql , 10, 1) WITH NOWAIT; EXEC(@sql); RAISERROR ('Restore DONE' , 10, 1) WITH NOWAIT; SELECT @lastID = @lastID + 200 END /* If you have any differential or transaction log backups you should restore them here to bring the previously restored data pages up to date */ END DECLARE @dbccSinglePage TABLE ( [ParentObject] NVARCHAR(500), [Object] NVARCHAR(500), [Field] NVARCHAR(500), [VALUE] NVARCHAR(MAX) ) DECLARE @cols NVARCHAR(MAX), @paramDefinition NVARCHAR(500), @SQLtoExec VARCHAR(1000), @FileID VARCHAR(100), @PageID VARCHAR(100), @i INT = 1 -- Get deleted table columns from information_schema view -- Need sp_executeSQL because database name can't be passed in as variable SELECT @cols = 'select @cols = STUFF((SELECT '', ['' + COLUMN_NAME + '']''FROM ' + @dbName + '.INFORMATION_SCHEMA.COLUMNSWHERE TABLE_NAME = ''' + @tableName + ''' AND TABLE_SCHEMA = ''' + @schemaName + '''ORDER BY ORDINAL_POSITIONFOR XML PATH('''')), 1, 2, '''')', @paramDefinition = N'@cols nvarchar(max) OUTPUT' EXECUTE sp_executesql @cols, @paramDefinition, @cols = @cols OUTPUT -- Loop through all the restored data pages, -- read data from them and insert them into temp table -- which you can then insert into the orignial deleted table DECLARE dbccPageCursor CURSOR GLOBAL FORWARD_ONLY FOR SELECT [FileID], [PageID], [SQLtoExec] FROM #PagesToRestore ORDER BY [FileID], [PageID] OPEN dbccPageCursor; FETCH NEXT FROM dbccPageCursor INTO @FileID, @PageID, @SQLtoExec; WHILE @@FETCH_STATUS = 0 BEGIN RAISERROR ('---------------------------------------------', 10, 1) WITH NOWAIT; SELECT @sql = 'Loop iteration: ' + CONVERT(VARCHAR(10), @i); RAISERROR (@sql, 10, 1) WITH NOWAIT; SELECT @sql = 'Running: ' + @SQLtoExec RAISERROR (@sql, 10, 1) WITH NOWAIT; -- if something goes wrong with DBCC execution or data gathering, skip it but print error BEGIN TRY INSERT INTO @dbccSinglePage EXEC (@SQLtoExec) -- make the data insert magic happen here IF (SELECT CONVERT(BIGINT, [VALUE]) FROM @dbccSinglePage WHERE [Field] LIKE '%Metadata: ObjectId%') = OBJECT_ID('['+@dbName+'].['+@schemaName +'].['+@tableName+']') BEGIN DELETE @dbccSinglePage WHERE NOT ([ParentObject] LIKE 'Slot % Offset %' AND [Object] LIKE 'Slot % Column %') SELECT @sql = 'USE tempdb; ' + 'IF (OBJECTPROPERTY(object_id(''' + @undeletedTableName + '''), ''TableHasIdentity'') = 1) ' + 'SET IDENTITY_INSERT ' + @undeletedTableName + ' ON; ' + 'INSERT INTO ' + @undeletedTableName + '(' + @cols + ') ' + STUFF((SELECT ' UNION ALL SELECT ' + STUFF((SELECT ', ' + CASE WHEN VALUE = '[NULL]' THEN 'NULL' ELSE '''' + [VALUE] + '''' END FROM ( -- the unicorn help here to correctly set ordinal numbers of columns in a data page -- it's turning STRING order into INT order (1,10,11,2,21 into 1,2,..10,11...21) SELECT [ParentObject], [Object], Field, VALUE, RIGHT('00000' + O1, 6) AS ParentObjectOrder, RIGHT('00000' + REVERSE(LEFT(O2, CHARINDEX(' ', O2)-1)), 6) AS ObjectOrder FROM ( SELECT [ParentObject], [Object], Field, VALUE, REPLACE(LEFT([ParentObject], CHARINDEX('Offset', [ParentObject])-1), 'Slot ', '') AS O1, REVERSE(LEFT([Object], CHARINDEX('Offset ', [Object])-2)) AS O2 FROM @dbccSinglePage WHERE t.ParentObject = ParentObject )t)t ORDER BY ParentObjectOrder, ObjectOrder FOR XML PATH('')), 1, 2, '') FROM @dbccSinglePage t GROUP BY ParentObject FOR XML PATH('') ), 1, 11, '') + ';' RAISERROR (@sql, 10, 1) WITH NOWAIT; EXEC (@sql) END END TRY BEGIN CATCH SELECT @sql = 'ERROR!!!' + CHAR(10) + CHAR(13) + 'ErrorNumber: ' + ERROR_NUMBER() + '; ErrorMessage' + ERROR_MESSAGE() + CHAR(10) + CHAR(13) + 'FileID: ' + @FileID + '; PageID: ' + @PageID RAISERROR (@sql, 10, 1) WITH NOWAIT; END CATCH DELETE @dbccSinglePage SELECT @sql = 'Pages left to process: ' + CONVERT(VARCHAR(10), @pagesCount - @i) + CHAR(10) + CHAR(13) + CHAR(10) + CHAR(13) + CHAR(10) + CHAR(13), @i = @i+1 RAISERROR (@sql, 10, 1) WITH NOWAIT; FETCH NEXT FROM dbccPageCursor INTO @FileID, @PageID, @SQLtoExec; END CLOSE dbccPageCursor; DEALLOCATE dbccPageCursor; EXEC ('SELECT ''' + @undeletedTableName + ''' as TableName; SELECT * FROM ' + @undeletedTableName)END TRYBEGIN CATCH SELECT ERROR_NUMBER() AS ErrorNumber, ERROR_MESSAGE() AS ErrorMessage IF CURSOR_STATUS ('global', 'dbccPageCursor') >= 0 BEGIN CLOSE dbccPageCursor; DEALLOCATE dbccPageCursor; ENDEND CATCH-- if the table was deleted we need to finish the restore page sequenceIF @tableWasTruncated = 0BEGIN -- take a log tail backup and then restore it to complete page restore process DECLARE @currentDate VARCHAR(30) SELECT @currentDate = CONVERT(VARCHAR(30), GETDATE(), 112) RAISERROR ('Starting Log Tail backup to c:\Temp ...', 10, 1) WITH NOWAIT; PRINT ('BACKUP LOG [' + @dbName + '] TO DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') EXEC ('BACKUP LOG [' + @dbName + '] TO DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') RAISERROR ('Log Tail backup done.', 10, 1) WITH NOWAIT; RAISERROR ('Starting Log Tail restore from c:\Temp ...', 10, 1) WITH NOWAIT; PRINT ('RESTORE LOG [' + @dbName + '] FROM DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') EXEC ('RESTORE LOG [' + @dbName + '] FROM DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') RAISERROR ('Log Tail restore done.', 10, 1) WITH NOWAIT;END-- The last step is manual. Insert data from our temporary table to the original deleted table The misconception here is that you can do a single table restore properly in SQL Server. You can't. But with little experimentation you can get pretty close to it. One way to possible remove a dependency on a backup to retrieve deleted pages is to quickly run a similar script to the upper one that gets data directly from data pages while the rows are still marked as ghost records. It could be done if we could beat the ghost record cleanup task.

    Read the article

  • CodePlex Daily Summary for Tuesday, June 28, 2011

    CodePlex Daily Summary for Tuesday, June 28, 2011Popular ReleasesCoding4Fun Tools: Coding4Fun.Phone.Toolkit v1.4.3: Fix for prompts not returning the appbarMosaic Project: Mosaic Alpha build 261: - Fixed crash when pinning applications in x64 OS - Added Hub to video widget. It shows videos from Video library (only .wmv and .avi). Can work slow if there are too much files. - Fixed some issues with scrolling - Fixed bug with html widgets - Fixed bug in Gmail widget - Added html today widget missed in previous release - Now Mosaic saves running widgets if you restarting from optionsEnhSim: EnhSim 2.4.9 BETA: 2.4.9 BETAThis release supports WoW patch 4.2 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added in some of th....NET Reflector Add-Ins: Reflector V7 Add-Ins: All the add-ins compiled for Reflector V7TerrariViewer: TerrariViewer v4.1 [4.0 Bug Fixes]: Version 4.1 ChangelogChanged how users will Open Player files (This change makes it much easier) This allowed me to remove the "Current player file" labels that were present Changed file control icons Added submit bug button Various Bug Fixes Fixed crashes related to clicking on buffs before a character is loaded Fixed crashes related to selecting "No Buff" when choosing a new buff Fixed crashes related to clicking on a "Max" button on the buff tab before a character is loaded Cor...AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta8: ??AcDown???????????????,?????????????????????。????????????????????,??Acfun、Bilibili、???、???、?????,???????????、???????。 AcDown???????????????????????????,???,???????????????????。 AcDown???????C#??,?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??:????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64),?????"?????????"??? ??????????????,??????????: ??"AcDown?????"????????? ??v3.0 Beta8 ?? ??????????????? ???????????????(??????????) ???????...BlogEngine.NET: BlogEngine.NET 2.5: Get DotNetBlogEngine for 3 Months Free! Click Here for More Info 3 Months FREE – BlogEngine.NET Hosting – Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.5 instructions. To get started, be sure to check out our installatio...PHP Manager for IIS: PHP Manager 1.2 for IIS 7: This release contains all the functionality available in 62183 plus the following additions: Command Line Support via PowerShell - now it is possible to manage and script PHP installations on IIS by using Windows PowerShell. More information is available at Managing PHP installations with PHP Manager command line. Detection and alert when using local PHP handler - if a web site or a directory has a local copy of PHP handler mapping then the configuration changes made on upper configuration ...MiniTwitter: 1.71: MiniTwitter 1.71 ???? ?? OAuth ???????????? ????????、??????????????????? ???????????????????????SizeOnDisk: 1.0.10.0: Fix: issue 327: size format error when save settings Fix: some UI bindings trouble (sorting, refresh) Fix: user settings file deletion when corrupted Feature: TreeView virtualization (better speed with many folders) Feature: New file type DataGrid column Feature: In KByte view, show size of file < 1024B and > 0 with 3 decimal Feature: New language: Italian Task: Cleanup for speedRawr: Rawr 4.2.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...HD-Trailers.NET Downloader: HD-Trailer.net Downloader 1.86: This version implements a new config flag "ConsiderTheatricalandNumberedTrailersasIdentical" that for the purposes of Exclusions only Teaser Trailer and one Trailer (named Trailer, Theatrical Traler Trailer No. 1, Trailer 1, Trailer No. 2, etc) will be downloaded. This also includes a bug fix where the .nfo file did not include the -trailer if configured for XBMC.N2 CMS: 2.2: * Web platform installer support available ** Nuget support available What's newDinamico Templates (beta) - an MVC3 & Razor based template pack using the template-first! development paradigm Boilerplate CSS & HTML5 Advanced theming with css comipilation (concrete, dark, roadwork, terracotta) Template-first! development style Content, news, listing, slider, image sizes, search, sitemap, globalization, youtube, google map Display Tokens - replaces text tokens with rendered content (usag...Circuit Diagram: Circuit Diagram v0.5 Beta: New in this release: New components: Ammeter (meter) Voltmeter (meter) Undo/redo functionality for placing/moving components Choose resolution when exporting PNG image New logoMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.23: XML input file can now specify both JS and CSS output files in the same XML file. Don't output octal escsape sequences in string literals for strict-mode scripts. Expand expression optimizations to handle more instances of logical-not being smaller. Properly handle comments that look like conditional comments but aren't because no @cc_on statement has been encountered. CSS Important comments should start on a new line, and CSS hacks should not have the ! in them. Various other smaller updates.KinectNUI: Jun 25 Alpha Release: Initial public version. No installer needed, just run the EXE.Terraria World Viewer: Version 1.5: Update June 24th Made compatible with the new tiles found in Terraria 1.0.5Kinect Earth Move: KinectEarthMove sample code: Sample code releasedThis is a sample code for Kinect for Windows SDK beta, which was demonstrated on Channel 9 Kinect for Windows SKD beta launch event on June 17 2011. Using color image and skeleton data from Kinect and user in front of Kinect can manipulate the earth between his/her hands.patterns & practices: Project Silk: Project Silk Community Drop 12 - June 22, 2011: Changes from previous drop: Minor code changes. New "Introduction" chapter. New "Modularity" chapter. Updated "Architecture" chapter. Updated "Server-Side Implementation" chapter. Updated "Client Data Management and Caching" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To ins...DotNetNuke® Community Edition: 06.00.00 Beta: Beta 1 (Build 2300) includes many important enhancements to the user experience. The control panel has been updated for easier access to the most important features and additional forms have been adapted to the new pattern. This release also includes many bug fixes that make it more stable than previous CTP releases. Beta ForumsNew ProjectsAI4CAD-3D: AI4CAD-3D bir 3 boyutlu tasarim ve ince ve kaba insaat metraj programidir.Beginner 2D game Dev -MokoNa: learning to make 2D games from ground up cae2rampage: A top down XNA-based multipalyer game.CamelWiki: Simple wiki software written in Perl using POD as markup language. CamelWiki can use MySQL, PostgreSQL or SQLite as database backend. DmPoster: An assistant to help us to post danmaku to bilibili.tv website. ????? bilibili.tv ?????????。 It's developed in C#. ????? C#。EasyDP: EasyDP is an open source Silverlight application to upload and manage one's display pictures in a website. It can be integrated to websites not limited to ASP.NET. It posts images up with generic HTTP form data thus it can communicate with HTTP handler written in any server-side programming language.E-Commerce TCP: Projeto E-Commerce para a cadeira de TCP da UFRGS. Semestre 01/2011.Encounter: a host-guest interaction energy calculator: Encounter is a simple program for calculating the interaction energy between two molecules using the output from a GAUSSIAN two-component counterpoise correction calculation. The Counterpoise Correction arises due to the Basis Set Superposition Error in quantum modeling.Excel add-in for regular expressions: Match, replace, and search character strings in Excel using the C++0x <regex> library.FlvBugger: ?Flv????????,???????????????????,????????。Frontdesk: Frontdesk is a form creator and autoresponder program designed in Microsoft ASP.NET MVC 2. It contains a custom member/security implementation, admin area, and lots of flexibility in form & autoresponder creation. It uses an integrated WYSIWYG editor & form field drag-and-drop.His2012: his2012ixbShop: ???????? Open-source e-commerce platformJBot: PL: Program sieciowy JBot jest chatterbotem. EN: Network program JBot is chatterbot.JungleSoft_Lux: luxKillstone PaRSS: Killstone PaRSS is a jQuery Plugin that parses an RSS feed and appends the items from the feed to a UL or OL on your webpage.Killstone PHP Framework: A simple PHP framework that helps organize your PHP application in a Model / View / Controller pattern.Orchard-PhotoTag-FamilyTree: This is an Orchard Module that allows you to tag a photo. It comes with a widget and a Page type. In addition to tagging photo's you can create a family tree/org chart to drill down into. (I originally built this for a family reunion).ResX DSL: ResX DSL is a Domain Specific Language created with Visual Studio DSL Tools. It helps to define a ResX DSL-Model with multi-language and multi-typed Ressources and generates with T4-Templates an ordinary Resx-File as well as a Proxy-Class with a given Ressources-Set.Self-Tracking Entity Generator for WPF and Silverlight: An Entity Framework project item to generate self-tracking entity classes for WPF and Silverlight applications.SharePoint 2010 Print List Ribbon Button: SharePoint 2010 Print List button on Top Ribbon for Calendar listStocks Application: This is technical demo to apply F-Sharp (F#) language in real world application. This application is close to real world enterprise application (with very optimal solutions, at least in 2011). The function of this application is to get Stock Quote Data and Historical Stock Prices from Yahoo Finance The Smart Shopping List: The Smart Shopping List makes it easier to keep track of your purchasesUmbraco Flickr API Search - XSLT Extension: An Umbraco XSLT Extension Package that enables calling the Flickr API to retrieve photos from a tag(s), user, group, and text search. The underlying engine is built off of the FlickrNET library (http://www.codeplex.com/FlickrNet).WASTLib: WASTLib is the acronim of Web Application Security Testing Library. Its main purpose is to easly create security tests for your web application. WinPanel: WinPanel ist ein nachgemachtes GNOME-Panel, dass auf Windows läuft. Es wird in Visual Basic 2010 Express programmiert.

    Read the article

  • CodePlex Daily Summary for Friday, June 10, 2011

    CodePlex Daily Summary for Friday, June 10, 2011Popular ReleasesZen4Sync, Orchestration and Test Load platform for SQL Server Merge Replication: Zen4Sync Report 1.0 - Excel Add-In: Zen4Sync Report is an Excel Add-In allowing you to generate reports based on the data generated by your Test Sessions. Choose a Zen4Sync Report release according to your version of Excel. The downloaded .zip archive contains all the resources needed to install the Zen4Sync Report Add-In for your version of Excel. For instrunctions on how to install, use and customize Zen4Sync Report, please see the Zen4Sync Report Guide.Candescent NUI: Candescent NUI Start Menu: This is the first version of the Candescent NUI Start Menu. There is currently only one item in the start menu by default (Windows Explorer). There is no user interface for configuration yet, but you can add programs yourself by adding lines to the file menu_config.csv. Please don't change the first line. Lines for programs have the following format: Name;Path Default Explorer;c:\windows\explorer.exe MyApp;c:\...\myapp.exe To show the menu, present your open hand to the kinect at a distan...Media Companion: MC 3.406b weekly: An minor issue was found with 3.406b, the fixed version is now posted.... Extract the entire archive to a folder which has user access rights, eg desktop, documents etc. Refer to the documentation on this site for the Installation & Setup Guide Important! If you find MC not displaying movie data properly, please try a 'movie rebuild' to reload the data from the nfo's into MC's cache. Fixes Movies Readded movie preference to rename invalid or scene nfo's to info extension Fix crash during ...SCCM Client Actions Tool: SCCM Client Actions Tool v0.5.1: SCCM Client Actions Tool v0.5.1 is currently the most stable version and includes all of the functionality requested so far. It comes with following changes since last version: Fixed an incorrect path to x64 client setup folder. It comes as a ZIP file that contains three files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA on Windows XP. Cmdkey.exe is natively a...Windows Azure VM Assistant: AzureVMAssist V1.0.0.5: AzureVMAssist V1.0.0.5 (Debug) - Test Release VersionSizeOnDisk: 1.8.0.3: Fix (issue 317): Main window icon loading error on windows server 2003 32bit runing on x86 cpu. Bypass of the Microsoft windows comexception.SketchFlow Template for Windows Phone: SketchFlow Template for Windows Phone 7: Initial release. Please make sure you are using a version of Blend with SketchFlow enabled and have also installed the the Mango developer tools for Windows Phone. fastJSON: v1.8: - Silverlight 4.0+ support merged - RegisterCustomType() for user defined serialization/deserialization without changing the source code open closed principalNetOffice - The easiest way to use Office in .NET: NetOffice Release 0.9: Changes: - fix examples (include issue 16026) - add new examples - 32Bit/64Bit Walkthrough is now available in technical Documentation. Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:..............................................................COM Proxy Management, Events, etc. - Examples in C# and VB.Net:............................................................Excel, Word, Outlook, PowerPoint, Access - COMAddi...Reusable Library: V1.1.3: A collection of reusable abstractions for enterprise application developerClosedXML - The easy way to OpenXML: ClosedXML 0.54.0: New on this release: 1) Mayor performance improvements. 2) AdjustToContents now take into account the text rotation. 3) Fixed issues 6782, 6784, 6788HTML-IDEx: HTML-IDEx .15 ALPHA: This release fixes line counting a little bit and adds the masshighlight() sub, which highlights pasted and inserted code.AutoLoL: AutoLoL v2.0.3: - Improved summoner spells are now displayed - Fixed some of the startup errors people got - Double clicking an item selects it - Some usability changes that make using AutoLoL just a little easier - Bug fixes AutoLoL v2 is not an update, but an entirely new version! Please install to a different directory than AutoLoL v1Host Profiles: Host Profiles 1.0: Host Profiles 1.0 Release Quickly modify host file Automatically flush dnsVidCoder: 0.9.2: Updated to HandBrake 4024svn. This fixes problems with mpeg2 sources: corrupted previews, incorrect progress indicators and encodes that incorrectly report as failed. Fixed a problem that prevented target sizes above 2048 MB.SharePoint Search XSL Samples: SharePoint 2010 Samples: I have updated some of the samples from the 2007 release. These all work in SharePoint 2010. I removed the Pivot on File Extension because SharePoint 2010 search has refiners that perform the same function.AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta5: ??AcDown?????????????,??????????????,????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??:????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64),?????"?????????"??? ??v3.0 Beta5 ?????????? ???? ?? ???????? ???"????????"?? ????????????? ????????/???? ?? ???"????"??? ?? ??????????? ?? ?? ??????????? ?? ?????????????????? ??????????????????? ???????????????? ????????????Discussions???????? ????AcDown??????????????VFPX: GoFish 4 Beta 1: Current beta is Build 144 (released 2011-06-07 ) See the GoFish4 info page for details and video link: http://vfpx.codeplex.com/wikipage?title=GoFishSterling NoSQL OODB for .NET 4.0, Silverlight 4 and 5, and Windows Phone 7: Sterling OODB v1.5: Welcome to the Sterling 1.5 RTM. This version is backwards compatible without modification to the 1.4 beta. For the 1.0, you will need to upgrade your database. Please see this discussion for details. You must modify your 1.0 code for persistence. The 1.5 version defaults to an in-memory driver. To save to isolated storage or use one of the new mechanisms, see the available drivers and pass an instance of the appropriate one to your database (different databases may use different drivers). ...patterns & practices: Project Silk: Project Silk Community Drop 10 - June 3, 2011: Changes from previous drop: Many code changes: please see the readme.mht for details. New "Application Notifications" chapter. Updated "Server-Side Implementation" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To install and run the reference implementation, you must perform the fol...New ProjectsAngry Apps: A game platform written on top of XNA Game Studio. The purpose of this project is to project a vanilla type Game project which can be used in many types of games.BLooD_ICQ: bloodicqCloud Fox: Cloud Fox is a Windows Phone application that allows you to view your Firefox Sync data on your mobile phone. It is similar to Firefox Home for iPhone. The current version will target phones running NoDo, but future versions will eventually require Mango. The application is developed in C# using Silverlight, Json.Net, Mvvm Light and Ninject.Configuration files Merger: This program is to help to merge different config files(environmental difference) and common config file into a single web.config/app.config. CRM 2011 Plugin Utilities: This project contains utilities from CRM 2011 plugins. Genera/calculate full name of a custom entity given the first, last and middle name.CUDA driver API: Making the CUDA driver API as simple to use as the runtime API. Almost.DBXMLTransfer: Command line application that: 1) extracts xml returned by a stored procedure to a file and 2) passes xml contained in a file to a stored procedure (which can use it for inserts & updates for example)Dot Generator: This is a project I did to generate numbers using the number of the dots in the number it self to get a visual representation of how big larg numbers areDRYlib.Net: DRY (Don't Repeat Yourself) -- or, in other words, code-reuse -- makes me create this Class Library so I don't have to keep creating the same code here and there. Feel free to use these snippets. I'm releasing them under a permissive license (Apache Public License 2.0). The DRYlib is created using Visual BASIC 2010 Express. What you can find in this DRYlib include, but not limited to: * CRC Hash algorithms * Simple, high-performance Integer extensions * Simple, oft-used Stri...DW.Configurations: DW.Configurations - Enables an easy handling of application settings Please see www.my.libraries.de for more information and documentation.DW.Game.MauMau: Its a MauMau game with the possibility to define all rules DW.Game.Sudoku: It's just a Sudoku gameDW.Interactivity: DW.Interactivity - Brings additional functionalities to WPF controls Please see www.my.libraries.de for more information and documentation.DW.Logging: DW.Logging - Supports an easy working with log files Please see www.my.libraries.de for more information and documentation.DW.Services: DW.Services - Brings standard services Please see www.my.libraries.de for more information and documentation.DW.SharpTools: DW.SharpTools - Brings additional possibilities to C# Please see www.my.libraries.de for more information and documentation.DW.UnitTests: DW.UnitTests - Gives some objects for easy UnitTests Please see www.my.libraries.de for more information and documentation.DW.WPFDev: DW.WPFDev - Some useful objects for developing custom controls and behaviors Please see www.my.libraries.de for more information and documentation.DW.WPFToolkit: DW.WPFToolkit - A custom controls library Please see www.my.libraries.de for more information and documentation.Elucidate: A GUI to drive the SnapRAID command line (All supported platforms): Definition: explain in detail Synonyms: annotate, clarify, clear, clear up, decode, demonstrate, enlighten, exemplify, explicate, expound, get across, illuminate, illustrate, interpret, make perfectly clear This will take on the task of creating a SnapRAID GUI to drive it's command line options, but give a little help and clarification (And logging) to guide the novice user.FixWordProperties for Office 2003, 2007 and 2010: Ken Getz originally wrote the FixWordProperties I believe in 2006. I had a a few extra requirements like the ability to unlock locked files, without passwords, using the office interop model, instead of word and a few more things that I needed in the winter of 2007.Information System Alumni Community: Here is our Internet Programming project. This site help alumni to always keep interact with their friends through this site.They can track his friend name, city, occupation and then interact with them to (whoa..like Social Network right!!).Go check this out int main code samples: Repository for all demos/samples posted at http://blog.r2d2rigo.es/english/LarX - XNA Game Engine: LarX is an XNA Game Engine, 2D and 3D, that uses SunBurn for Rendering, sgMotion for animations, and BEPU for Physics. It enables developers to write quicly AAA games.Membership, Role and Profile Providers for develop, debug, test: These ASP.NET providers for Membership, Roles and Profiles are valuable during development, debugging and testing due to the ease of creating, removing and changing users, user roles, etc. Music search engine: Ilovethismusic.com lets you listen & download music based on your mood, weather, or any type of expression you can think of. Just press Play.NicolasLight: This is for business projectOlympic.Magazine: sport supplements e-shop projectProject Obscura: Project Obscura is a game about to be in development by a group of friends, more data soon...RegularExpressionTest: .SalesManagementSystem: SalesManagementSystemShoozla: Very simple and powerful tool to search for missing covers. It finds album covers automatically and periodically. It uses LASTFM web service (website registration needed). WPF Application developed in C# following a MVVM design pattern.Silverlight Mind Map demo: A Mind Map control library and sample application created in Silveright. Although the library can be useful by itself, the main goal of this project is to server as a demo and reference application for Wiki that shows different Silverlight testing techniques. SketchFlow Template for Windows Phone: The SketchFlow Template for Windows Phone adds a new SketchFlow template for Expression Blend users, making it fast and easy to prototype Windows Phone applications.Smart Blog: Smart Blog ????,??ASP.NET??,?????Entity Framework、MVC 3.0(razor)、WCF???。???????SqlCE?????,????????,????、??。 SQLiteManager (sys_27): SQLiteManager makes for manage SQLite Database. It's developed in C#. (WPF and use MVVM-patern)testing access to TFS: This is a just a trivial set of test files to learn about TFS. I am testing each step of this process and will try to document it for others. Maybe this is obvious to others, but I am still learning TFS.TFS NuGetter: NuGetter is a TFS 2010 Build Activity designed to provide packaging and deployment management to projects destined for a NuGet Gallery.

    Read the article

  • CodePlex Daily Summary for Tuesday, February 01, 2011

    CodePlex Daily Summary for Tuesday, February 01, 2011Popular ReleasesWatchersNET CKEditor™ Provider for DotNetNuke®: CKEditor Provider 1.12.07: Whats New Added CKEditor 3.5.1 (Rev. 6398) - Whats New File Browser now List all Anchor on selected Dnn Page (Tab) changes File Browser now uses DNN Cache instead of HTTP Session for Authorization Using now Google Hosted CDN Versions of jQuery and jQuery-UI Scripts (Auto detects if needed http or https)Chemistry Add-in for Word: Chemistry Add-in for Word - Version 1.0: On February 1, 2011, we announced the availability of version 1 of the Chemistry Add-in for Word, as well as the assignment of the open source project to the Outercurve Foundation by Microsoft Research and the University of Cambridge. System RequirementsHardware RequirementsAny computer that can run Office 2007 or Office 2010. Software RequirementsYour computer must have the following software: Any version of Windows that can run Office 2007 or Office 2010, which includes Windows XP SP3 and...StyleCop for ReSharper: StyleCop for ReSharper 5.1.15005.000: Applied patch from rodpl for merging of stylecop setting files with settings in parent folder. Previous release: A considerable amount of work has gone into this release: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new Objec...Minecraft Tools: Minecraft Topographical Survey 1.4: MTS requires version 4 of the .NET Framework - you must download it from Microsoft if you have not previously installed it. This version of MTS adds MCRegion support and fixes bugs that caused rendering to fail for some users. New in this version of MTS: Support for rendering worlds compressed with MCRegion Fixed rendering failure when encountering non-NBT files with the .dat extension Fixed rendering failure when encountering corrupt NBT files Minor GUI updates Note that the command...MVC Controls Toolkit: Mvc Controls Toolkit 0.8: Fixed the following bugs: *Variable name error in the jvascript file that prevented the use of the deleted item template of the Datagrid *Now after the changes applied to an item of the DataGrid are cancelled all input fields are reset to the very initial value they had. *Other minor bugs. Added: *This version is available both for MVC2, and MVC 3. The MVC 3 version has a release number of 0.85. This way one can install both version. *Client Validation support has been added to all control...Office Web.UI: Beta preview (Source): This is the first Beta. it includes full source code and all available controls. Some designers are not ready, and some features are not finalized allready (missing properties, draft styles) ThanksASP.net Ribbon: Version 2.2: This release brings some new controls (part of Office Web.UI). A few bugs are fixed and it includes the "auto resize" feature as you resize the window. (It can cause an infinite loop when the window is too reduced, it's why this release is not marked as "stable"). I will release more versions 2.3, 2.4... until V3 which will be the official launch of Office Web.UI. Both products will evolve at the same speed. Thanks.Barcode Rendering Framework: 2.1.1.0: Final release for VS2008 Finally fixed bugs with code 128 symbology.xUnit.net - Unit Testing for .NET: xUnit.net 1.7: xUnit.net release 1.7Build #1540 Important notes for Resharper users: Resharper support has been moved to the xUnit.net Contrib project. Important note for TestDriven.net users: If you are having issues running xUnit.net tests in TestDriven.net, especially on 64-bit Windows, we strongly recommend you upgrade to TD.NET version 3.0 or later. This release adds the following new features: Added support for ASP.NET MVC 3 Added Assert.Equal(double expected, double actual, int precision) Ad...DoddleReport - Automatic HTML/Excel/PDF Reporting: DoddleReport 1.0: DoddleReport will add automatic tabular-based reporting (HTML/PDF/Excel/etc) for any LINQ Query, IEnumerable, DataTable or SharePoint List For SharePoint integration please click Here PDF Reporting has been placed into a separate assembly because it requies AbcPdf http://www.websupergoo.com/download.htmSpark View Engine: Spark v1.5: Release Notes There have been a lot of minor changes going on since version 1.1, but most important to note are the major changes which include: Support for HTML5 "section" tag. Spark has now renamed its own section tag to "segment" instead to avoid clashes. You can still use "section" in a Spark sense for legacy support by specifying ParseSectionAsSegment = true if needed while you transition Bindings - this is a massive feature that further simplifies your views by giving you a powerful ...Marr DataMapper: Marr DataMapper 1.0.0 beta: First release.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.3: Version: 2.0.0.3 (Milestone 3): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...Rawr: Rawr 4.0.17 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 and on the Version Notes page: http://rawr.codeplex.com/wikipage?title=VersionNotes As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you...Squiggle - A Free open source LAN Messenger: Squiggle 2.5 Beta: In this release following are the new features: Localization: Support for Arabic, French, German and Chinese (Simplified) Bridge: Connect two Squiggle nets across the WAN or different subnets Aliases: Special codes with special meaning can be embedded in message like (version),(datetime),(time),(date),(you),(me) Commands: cls, /exit, /offline, /online, /busy, /away, /main Sound notifications: Get audio alerts on contact online, message received, buzz Broadcast for group: You can ri...VivoSocial: VivoSocial 7.4.2: Version 7.4.2 of VivoSocial has been released. If you experienced any issues with the previous version, please update your modules to the 7.4.2 release and see if they persist. If you have any questions about this release, please post them in our Support forums. If you are experiencing a bug or would like to request a new feature, please submit it to our issue tracker. Web Controls * Updated Business Objects and added a new SQL Data Provider File. Groups * Fixed a security issue whe...PHP Manager for IIS: PHP Manager 1.1.1 for IIS 7: This is a minor release of PHP Manager for IIS 7. It contains all the functionality available in 56962 plus several bug fixes (see change list for more details). Also, this release includes Russian language support. SHA1 codes for the downloads are: PHPManagerForIIS-1.1.0-x86.msi - 6570B4A8AC8B5B776171C2BA0572C190F0900DE2 PHPManagerForIIS-1.1.0-x64.msi - 12EDE004EFEE57282EF11A8BAD1DC1ADFD66A654mojoPortal: 2.3.6.1: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2361-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Parallel Programming with Microsoft Visual C++: Drop 6 - Chapters 4 and 5: This is Drop 6. It includes: Drafts of the Preface, Introduction, Chapters 2-7, Appendix B & C and the glossary Sample code for chapters 2-7 and Appendix A & B. The new material we'd like feedback on is: Chapter 4 - Parallel Aggregation Chapter 5 - Futures The source code requires Visual Studio 2010 in order to run. There is a known bug in the A-Dash sample when the user attempts to cancel a parallel calculation. We are working to fix this.NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.160: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release improves NodeXL's Twitter and Pajek features. See the Complete NodeXL Release History for details. Installation StepsFollow these steps to install and use the template: Download the Zip file. Unzip it into any folder. Use WinZip or a similar program, or just right-click the Zip file in Windows Explorer and select "Extract All." Close Ex...New Projectsabcdeffff: aaaaaaaaaaaaaaaaaaaaaaaaaaAutomating Variation: This project help you to automate the Site Variation in SharePoint 2010BAM Converter: DEMO Project showcasing several functionalities of Windows Phone 7 - Isolated Storage, Web Service Access, User Interface.cstgamebgs: Project for wp7DFS-Commands: A PowerShell module containing functions for manipulating Distributed File System (DFS). This allows admins to carry out DFS tasks using PowerShell without resorting to external commands such as dfsutil.exe, dfscmd.exe or modlink.exe.Disk Usage: Disk Usage is a small WPF tool to analyze the drive space on Windows. It can plot pie charts of the folder size. EPiServer Filtered Page Reference Properties: The EPiServer Filtered Page Reference properties provide you with the ability to restrict the pages in which an EPiServer can pick. The assembly once depoyed to your projects bin folder will add two new properties: -FilteredPageReferenceProperty -FilteredLinkCollectoinPropertyExample Ajax MVC address-book: This is an example application in PHP, using no framework but PHP only, utilizing MVC, SQLite, jQuery and Ajax. It is fully SOA. FlyMedia: FlyMedia is a simple music player written in C/C++ based on FMOD and Gdiplus. It aims to fly your media at a touch!Global String Formatter: The Global String Formatter library allows developers to deal with conditional string formatting in an elegant fashion. Developers specify a predicate and a corresponding string output function for each case of the formatting. The library plays well with DI frameworks.JS Mixer: JS Mixer is a simple UI over the YUI Compressor for .Net Library. It allows you to merge and minimize javascript files easily.LAPD: Lapd (Location and Attendance to Dependant People) make care-dependent people's life easier, improving the communication between their care providers and them. It is developed in C# over .NET Compact Framework 3.5motion10 SharePoint Twitter Status Notes Control: Change the normal SharePoint Status control to the motion10 SharePoint Twitter Status Notes Control and you can send your tweets to Twitter! Music TD: Music TD is a Tower Defence project by Cypress Falls High School programming team. It is our first game, made in XNA.OJDetective: a win32 project for detecting your submissons on OJOpalis System Center VMM Extended Integration Pack: A Opalis Integration Pack for VMM with extended Functions to the offical IP from Microsoft.Opalis Virsto Integration Pack: A Opalis Integration Pack for Managing VirstoOne Hyper-V Storage (http://www.virsto.com) Pimp My Wave: It will be both an open source implementation of Multiloader / Kies firmware flasher and modding tool like changing boot screens directly. RESTful Connector for SharePoint 2010: This is a reusable custom connector for Business Data Connectivity Serivces in SharePoint 2010. It uses a RESTful service as a data source and XPath to map the propeties.SCWS: SCWS - XML web service for Microsoft System Center Operations Manager (AKA SCOM / OpsMgr). Developed in C# and .Net 3.5 with Visual Studio 2010. Can be used to get information on MonitoringObjects and to control maintenance mode. Ideal for integration with SCCM / ConfigMgr.somelameaspstuff: see titleSQLMap: Projeto com um Atlas do Mundo e suas divisões, salvos em tabelas no SQL Server, usando o seu módulo SpatialStackOverflow Google Chrome extension: Shows StackOverflow and StackExchange questions in new tab window in your Google ChromeSupMoul: Moulinette pour noter les supTodayTodo: This is software for manage every day tasks (one todo list for day). Silverlight (OOB), NoSQL, FullText Search for all task history

    Read the article

  • Xenserver 5.5 U2 a bit unstable with an unstable W2003 VM

    - by twistedbrain
    In the last week I had to reboot the host system twice and the second one by means of the power button. The system is a Dell PE 6950 (4 Opteron dual core, 2,8 Ghz, 16 GB RAM, 900 GB disk in a RAID 10 array composed by 4 450GB 15000 rpm disks) with XenServer 5.5 U2. We're installing it and at now there are working in production a 2003 32 bit Windows server VM with 2 GB RAM, 3 vcpu and about 200 GB disk in 4 partition (12 GB boot, 20 GB program, 80 GB user data, 80 GB other data). The first time I was compressing many Windows 2003 folders (some tens GB by means of W2003 compressed folder option) from a Windows remote console and some hours before my colleague installed Backup Exec agent that was alredy installed and that required a reboot (that was pending). The console stopped responding, it was no more possible to connect by means of remote console or by means of the console of the XenCentre, it was still possible from the network to use the shared folder of the VM and the programs on it (2 db and a GIS program), but the print server didn't work any more and I couldn't give remote reboot from other domain controller hosts. I couldn't stop the virtual machine neither from the XenCentre, neither from the command line of the host also forcing the reboot. I had to reboot the host server. Yesterday it has been worst. I installed a template of another VM, CentOS 5.3 and then, put the DVD in the drive of the host. Then, before the install and after the boot I checked for defect the DVD and the W2003 VM began to respond slowly (I was connected by means of an administration remote console) the task manager showed only mid or low load, it is, only the first of the 3 vcpu was loaded (about 70%), while the other two were about at 20% and also the disk I/O was not so heavy. Then the users were not so happy because they couldn't any more use the MS word docs on the server. I immediately stopped the check of the DVD (to do that I had to force the stop of such Centos 5.3 VM), then some users could again use their docs, but other had still problems, so I decided to reboot the VM, but it doesn't stopped, neither from XenCenter, neither from command line, neither forcing the reboot. Then I tried to reboot of the host, but it didn't worked, neither from the XenCentre, neither from the host prompt (shutdown -r now as root: it told that it was shutting down, but then it didn't did that). So I had to power off by means of the power button of the server (before I tried some Magic SyS REQ, but I saw that Xen isn't compiled with this option enabled). What could you suggest about my problem, what can I look, search and see? In the W2003 VM logs there are no errors or warning to explain what happened. Some more exciting, amusing and inspiring words of poetry (the facts happened around 11 am): \# egrep -i 'err|warning' xensource.log [20100219 10:32:05.597|debug|culo|6301 unix-RPC|VBD.plug R:c81bcda701f6|xenops] watch: watching xenstore paths: [ /xapi/0/frontend/vbd/51712/hotplug; /local/domain/0/backend/vbd/0/51712/tapdisk-error ] with timeout 1200.000000 seconds [20100219 10:32:05.597|debug|culo|6301 unix-RPC|VBD.plug R:c81bcda701f6|xenops] watch: fired on /local/domain/0/backend/vbd/0/51712/tapdisk-error [20100219 10:32:14.314|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] watch: watching xenstore paths: [ /local/domain/0/backend/vbd/0/51712/shutdown-done; /local/domain/0/error/device/vbd/51712/error ] with timeout 1200.000000 seconds [20100219 10:32:14.337|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] xenstore-rm /local/domain/0/error/backend/vbd/0 [20100219 10:32:14.337|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] xenstore-rm /local/domain/0/error/device/vbd/51712 [20100219 10:32:14.338|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] watch: fired on /local/domain/0/error/device/vbd/51712/error [20100219 10:53:48.903|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|helpers] Ignoring exception: INTERNAL_ERROR: [ Xb.Noent ] while Vmops.destroy_domain: Destroying domid 14 guest session [20100219 10:53:52.048|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/tap/14 [20100219 10:53:52.048|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51744 [20100219 10:53:52.085|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/tap/14 [20100219 10:53:52.086|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51728 [20100219 10:53:52.122|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/tap/14 [20100219 10:53:52.122|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51712 [20100219 10:53:52.127|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/vbd/14 [20100219 10:53:52.128|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51760 [20100219 10:53:52.496|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] Device.Vif.hard_shutdown about to blow away backend and error paths [20100219 10:53:52.497|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/vif/14 [20100219 10:53:52.497|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vif/0 [20100219 10:53:53.385|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] Device.Vif.hard_shutdown about to blow away backend and error paths [20100219 10:53:53.386|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/vif/14 [20100219 10:53:53.386|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vif/1 [20100219 10:53:53.389| warn|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|hotplug] Warning, deleting 'vif' entry from /xapi/14/hotplug/vif/0 [20100219 10:53:53.391| warn|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|hotplug] Warning, deleting 'vif' entry from /xapi/14/hotplug/vif/1 [20100219 11:20:49.766|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|helpers] Ignoring exception: INTERNAL_ERROR: [ Xb.Noent ] while Vmops.destroy_domain: Destroying domid 11 guest session [20100219 11:20:50.339|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/tap/11 [20100219 11:20:50.339|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vbd/832 [20100219 11:20:50.360|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/tap/11 [20100219 11:20:50.360|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vbd/768 [20100219 11:20:50.366|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/vbd/11 [20100219 11:20:50.366|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vbd/5696 [20100219 11:20:50.753|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] Device.Vif.hard_shutdown about to blow away backend and error paths [20100219 11:20:50.754|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/vif/11 [20100219 11:20:50.754|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vif/1 [20100219 11:20:50.757| warn|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|hotplug] Warning, deleting 'vif' entry from /xapi/11/hotplug/vif/1 [20100219 11:28:13.803|debug|culo|6610 inet-RPC|Connection to VM console R:e9f8b76e8975|console] error: INTERNAL_ERROR: [ Unix.Unix_error(63, "connect", "") ]

    Read the article

  • CodePlex Daily Summary for Friday, June 28, 2013

    CodePlex Daily Summary for Friday, June 28, 2013Popular ReleasesEsoteric language interpreters collection: WARP, FALSE, Befunge-93, BrainFuck version 1.9: WARP Add factorial source Add brainfuck interpreter source Correct flex number system parse test by using regexes Implement the { operator Implement the } operator Support standard input redirection (so that the , operator reads one line only) The following executes the WARP brainfuck interpreter with a hello world brainfuck program: echo "+++++ +++++[> +++++ ++ > +++++ +++++> +++> + <<<< - ]> ++ .> + .+++++ ++ ..+++ .> ++ .<< +++++ +++++ +++++ .> .+++ .----- -.----- --- .> +.> ."...SharePoint Calendar Helper: 1.0.0.0: The first release, enjoy!WebsiteFilter: WebsiteFilter 1.0: WebsiteFilter Need .net framework4.0ax 2012 Security Privilege generator: xpo privilige generator: While upgrading AX 2009 solutions to AX 2012. I became tired of creating all those privileges. It for every menu item every time the same case; create a view and a maintain privilege. So for all those lazy developer out there, her it is, a privilege Builder. How it works, easy select right mouse on the menu item and you get your privileges.Outlook 2013 Add-In: Configuration Form: This new version includes the following changes: - Refactored code a bit. - Removing configuration from main form to gain more space to display items. - Moved configuration to separate form. You can click the little "gear" icon to access the configuration form (still very simple). - Added option to show past day appointments from the selected day (previous in time, that is). - Added some tooltips. You will have to uninstall the previous version (add/remove programs) if you had installed it ...Stored Procedure Pager: LYB.NET.SPPager 1.10: check bugs: 1 the total page count of default stored procedure ".LYBPager" always takes error as this: page size: 10 total item count: 100 then total page count should be 10, but last version is 11. 2 update some comments with English forbidding messy code.Terminals: Version 3.0 - Release: Changes since version 2.0:Choose 100% portable or installed version Removed connection warning when running RDP 8 (Windows 8) client Fixed Active directory search Extended Active directory search by LDAP filters Fixed single instance mode when running on Windows Terminal server Merged usage of Tags and Groups Added columns sorting option in tables No UAC prompts on Windows 7 Completely new file persistence data layer New MS SQL persistence layer (Store data in SQL database)...NuGet: NuGet 2.6: Released June 26, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.6Python Tools for Visual Studio: 2.0 Beta: We’re pleased to announce the release of Python Tools for Visual Studio 2.0 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, and cross platform debugging support. For a quick overview of the general IDE experience, please watch this video: http://www.youtube.com/watch?v=TuewiStN...Player Framework by Microsoft: Player Framework for Windows 8 and WP8 (v1.3 beta): Preview: New MPEG DASH adaptive streaming plugin for Windows Azure Media Services Preview: New Ultraviolet CFF plugin. Preview: New WP7 version with WP8 compatibility. (source code only) Source code is now available via CodePlex Git Misc bug fixes and improvements: WP8 only: Added optional fullscreen and mute buttons to default xaml JS only: protecting currentTime from returning infinity. Some videos would cause currentTime to be infinity which could cause errors in plugins expectin...AssaultCube Reloaded: 2.5.8: SERVER OWNERS: note that the default maprot has changed once again. Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we continue to try to package for those OSes. Or better yet, try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compi...Compare .NET Objects: Version 1.7.2.0: If you like it, please rate it. :) Performance Improvements Fix for deleted row in a data table Added ability to ignore the collection order Fix for Ignoring by AttributesMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.95: update parser to allow for CSS3 calc( function to nest. add recognition of -pponly (Preprocess-Only) switch in AjaxMinManifestTask build task. Fix crashing bug in EXE when processing a manifest file using the -xml switch and an error message needs to be displayed (like a missing input file). Create separate Clean and Bundle build tasks for working with manifest files (AjaxMinManifestCleanTask and AjaxMinBundleTask). Removed the IsCleanOperation from AjaxMinManifestTask -- use AjaxMinMan...VG-Ripper & PG-Ripper: VG-Ripper 2.9.44: changes NEW: Added Support for "ImgChili.net" links FIXED: Auto UpdaterDocument.Editor: 2013.25: What's new for Document.Editor 2013.25: Improved Spell Check support Improved User Interface Minor Bug Fix's, improvements and speed upsWPF Composites: Version 4.3.0: In this Beta release, I broke my code out into two separate projects. There is a core FasterWPF.dll with the minimal required functionality. This can run with only the Aero.dll and the Rx .dll's. Then, I have a FasterWPFExtras .dll that requires and supports the Extended WPF Toolkit™ Community Edition V 1.9.0 (including Xceed DataGrid) and the Thriple .dll. This is for developers who want more . . . Finally, you may notice the other OPTIONAL .dll's available in the download such as the Dyn...Channel9's Absolute Beginner Series: Windows Phone 8: Entire source code for the Channel 9 series, Windows Phone 8 Development for Absolute Beginners.Indent Guides for Visual Studio: Indent Guides v13: ImportantThis release does not support Visual Studio 2010. The latest stable release for VS 2010 is v12.1. Version History Changed in v13 Added page width guide lines Added guide highlighting options Fixed guides appearing over collapsed blocks Fixed guides not appearing in newly opened files Fixed some potential crashes Fixed lines going through pragma statements Various updates for VS 2012 and VS 2013 Removed VS 2010 support Changed in v12.1: Fixed crash when unable to start...Fluent Ribbon Control Suite: Fluent Ribbon Control Suite 2.1.0 - Prerelease d: Fluent Ribbon Control Suite 2.1.0 - Prerelease d(supports .NET 3.5, 4.0 and 4.5) Includes: Fluent.dll (with .pdb and .xml) Showcase Application Samples (not for .NET 3.5) Foundation (Tabs, Groups, Contextual Tabs, Quick Access Toolbar, Backstage) Resizing (ribbon reducing & enlarging principles) Galleries (Gallery in ContextMenu, InRibbonGallery) MVVM (shows how to use this library with Model-View-ViewModel pattern) KeyTips ScreenTips Toolbars ColorGallery *Walkthrough (do...Magick.NET: Magick.NET 6.8.5.1001: Magick.NET compiled against ImageMagick 6.8.5.10. Breaking changes: - MagickNET.Initialize has been made obsolete because the ImageMagick files in the directory are no longer necessary. - MagickGeometry is no longer IDisposable. - Renamed dll's so they include the platform name. - Image profiles can now only be accessed and modified with ImageProfile classes. - Renamed DrawableBase to Drawable. - Removed Args part of PathArc/PathCurvetoArgs/PathQuadraticCurvetoArgs classes. The...New ProjectsAdjusting SharePoint Site Quota PowerShell: PowerShell Script that displays the current space statistics thresholds for the database, site and quota. With this script you change the quota of a site.AndroidOMS: android omsASP.NET????????????: ASP.NET???????????? GlobalProfile ?????ASP.NET???????????。 ?????????????XML??????,?????ASP.NET??IHttpModule???????????,?????HttpRuntime.Cache???????????。 ???ax 2012 Security Privilege generator: While upgrading AX 2009 solutions to AX 2012. I became tired of creating all those privileges.CometDocs.Net: The .Net binding of the CometDocs web API (https://www.cometdocs.com/developer/apiDocumentation)Compositional Signals: This project aims to develop a simple compositional signal processing pipeline for education purposesCRM 2011 Field Data Type Converter: Field data type converter for Microsoft Dynamics CRM 2011CRM Solution CommandLine Helper: CRM Solution Command Line helper provide command line interface to handle CRM solution deployment and automate basic tasks.cursosabado: curso sábado c#Custom Html Helper for Google Maps: This Custom HTML helper let you integrate google maps into your MVC app easiler than EVER!DemoGRAPHICS: This project was demo'ed at the Microsoft Build 2013 Conference as part of "What's new for HTML Developers in Blend for Visual Studio 2013 Preview".DotNetNuke Demo SkinObjects: A collection of skin objects for DotNetNuke designed to make demonstrations easier for people.Excel to Dynamics CRM: Excel to Dynamics CRM for Microsoft Dynamics CRM 2011 makes it easier for the CRM users to upsert (update and/or insert) data from an Excel file.Newbie Open Source Project: math developOpen Parsing Example: here is an example to parse my own fileformatPeople Finder: This is a web proyect aimed to help people to get contact with whom are lost. Initial purpose: Help those who had their kids kidnapped in hospitals.Recovery Solutions at Your Service: Find our some of the most incredible solutions for protecting your backup and data file from corruption, errors and damages.San Francisco Transportation: San Francisco Transportation appSecurity Analysing: Just beginning.Show My Apps: This project aims to build a WPF Application that monitors resources and display them in a beautiful screen, usually seen on TV.TSAsyncModulesExampleApp: TSAsyncModulesExampleApp - ??????????-?????? ????????? ?? TypeScriptUltimate Music Tagger: Ultimate Music Tagger is a powerful, easy and extreme fast tool to reorganize your music libraryUniversal Visualnovel Engine Tools: Universal Visualnovel Engine is a cross-platform AVG Game Engine which supports Windows Phone 8.0 OS.This project hosts the documents and samples of uvengine.WCF Data Service Example: The purpose of this application is to demonstrate the usage of WCF Data Service with Repository patternWebsiteSkip: websiteskip is an open source Web page jump httpmodule component.windowsrtdev: The purpose of this project is to provide a central location for "native" (ie: Win32 - not WinRT) Windows RT development libraries / applications.

    Read the article

  • CodePlex Daily Summary for Wednesday, November 21, 2012

    CodePlex Daily Summary for Wednesday, November 21, 2012Popular ReleasesImapX 2: ImapX 2.0.0.6: An updated release of the ImapX 2 library, containing many bugfixes for both, the library and the sample application.Metodología General Ajustada - MGA: 03.05.05: Cambios John: Se modificó el Procedimiento Alamacenado PROF03ObjetivoProductoConsultarIdF03 que no incluía los campos de IdUnidadMedida y UnidadMedida, lo que generaba error en la capa de datos al leer estos campos (PasarDataSetAPROF03ObjetivoProductoInfo) y terminaba devolviendo NULL en los registros, esto no dejaba la información en la Exportación y por ende en la Importación no subían los Productos. Generación de instaladores. Soporte técnico por correo electrónico, telefónico y en sitio.WiX Toolset: WiX v3.7 RC: WiX v3.7 RC (3.7.1119.0) provides feature complete Bundle update and reference tracking plus several bug fixes. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/11/20/WiX-v3.7-Release-Candidate-availablePicturethrill: Version 2.11.20.0: Fixed up Bing image provider on Windows 8Excel AddIn to reset the last worksheet cell: XSFormatCleaner.xla: Modified the commandbar code to use CommandBar IDs instead of English names.Json.NET: Json.NET 4.5 Release 11: New feature - Added ITraceWriter, MemoryTraceWriter, DiagnosticsTraceWriter New feature - Added StringEscapeHandling with options to escape HTML and non-ASCII characters New feature - Added non-generic JToken.ToObject methods New feature - Deserialize ISet<T> properties as HashSet<T> New feature - Added implicit conversions for Uri, TimeSpan, Guid New feature - Missing byte, char, Guid, TimeSpan and Uri explicit conversion operators added to JToken New feature - Special case...EntitiesToDTOs - Entity Framework DTO Generator: EntitiesToDTOs.v3.0: DTOs and Assemblers can be generated inside project folders! Choose the types you want to generate! Support for Visual Studio 2012 !!! Support for new Entity Framework EDMX (format used by VS2012) ! Support for Enum Types! Optional automatic check for updates! Added the following methods to Assemblers! IEnumerable<DTO>.ToEntities() : ICollection<Entity> IEnumerable<Entity>.ToDTOs() : ICollection<DTO> Indicate class identifier for DTOs and Assemblers! Cleaner Assemblers code....mojoPortal: 2.3.9.4: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2394-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...VidCoder: 1.4.6 Beta: Brought back the x264 advanced options panel due to popular demand. Thank you for all the feedback. x264 Preset/Profile/Tune/Level has been moved back to the Video tab, along with a copy of the "extra options" string. Added Fast Decode and Zero Latency checkboxes to support multiple Tunes. Added cropping option "None". Audio bitrates that are incompatible with the encoder (such as MP3 > 320 kbps) are no longer preset on the list. Fixed crash on opening VidCoder after de-selecting "re...DotNetNuke® Store: 03.01.07: What's New in this release? IMPORTANT: this version requires DotNetNuke 04.06.02 or higher! DO NOT REPORT BUGS HERE IN THE ISSUE TRACKER, INSTEAD USE THE DotNetNuke Store Forum! Bugs corrected: - Replaced some hard coded references to the default address provider classes by the corresponding interfaces to allow the creation of another address provider with a different name. New Features: - Added the 'pickup' delivery option at checkout. - Added the 'no delivery' option in the Store Admin ...Bundle Transformer - a modular extension for ASP.NET Web Optimization Framework: Bundle Transformer 1.6.10: Version: 1.6.10 Published: 11/18/2012 Now almost all of the Bundle Transformer's assemblies is signed (except BundleTransformer.Yui.dll); In BundleTransformer.SassAndScss the SassAndCoffee.Ruby library was replaced by my own implementation of the Sass- and SCSS-compiler (based on code of the SassAndCoffee.Ruby library version 2.0.2.0); In BundleTransformer.CoffeeScript added support of CoffeeScript version 1.4.0-3; In BundleTransformer.TypeScript added support of TypeScript version 0....ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.0: +2012-11-18 v3.2.0 -?????????????????SelectedValueArray????????(◇?◆:)。 -???????????????????RecoverPropertiesFromJObject????(〓?〓、????、??、Vian_Pan)。 -????????????,?????????????,???SelectedValueArray???????(sam.chang)。 -??Alert.Show???????????(swtseaman)。 -???????????????,??Icon??IconUrl????(swtseaman)。 -?????????TimePicker(??)。 -?????????,??/res.axd?css=blue.css&v=1。 -????????,?????????????,???????。 -????MenuCheckBox(???????)。 -?RadioButton??AutoPostBack??。 -???????FCKEditor?????????...BugNET Issue Tracker: BugNET 1.2: Please read our release notes for BugNET 1.2: http://blog.bugnetproject.com/bugnet-1-2-has-been-released Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.Paint.NET PSD Plugin: 2.2.0: Changes: Layer group visibility is now applied to all layers within the group. This greatly improves the visual fidelity of complex PSD files that have hidden layer groups. Layer group names are prefixed so that users can get an indication of the layer group hierarchy. (Paint.NET has a flat list of layers, so the hierarchy is flattened out on load.) The progress bar now reports status when saving PSD files, instead of showing an indeterminate rolling bar. Performance improvement of 1...CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1116.7): [IMPROVED] Detailed error message descriptions for FaultException [FIX] Fixed bug in rule CrmOfflineAccessStateRule which had incorrect State attribute name [FIX] Fixed bug in rule EntityPropertyRule which was missing PropertyValue attribute [FIX] Current connection information was not displayed in status bar while refreshing list of entitiesSuper Metroid Randomizer: Super Metroid Randomizer v5: v5 -Added command line functionality for automation purposes. -Implented Krankdud's change to randomize the Etecoon's item. NOTE: this version will not accept seeds from a previous version. The seed format has changed by necessity. v4 -Started putting version numbers at the top of the form. -Added a warning when suitless Maridia is required in a parsed seed. v3 -Changed seed to only generate filename-legal characters. Using old seeds will still work exactly the same. -Files can now be saved...Caliburn Micro: WPF, Silverlight, WP7 and WinRT/Metro made easy.: Caliburn.Micro v1.4: Changes This version includes many bug fixes across all platforms, improvements to nuget support and...the biggest news of all...full support for both WinRT and WP8. Download Contents Debug and Release Assemblies Samples Readme.txt License.txt Packages Available on Nuget Caliburn.Micro – The full framework compiled into an assembly. Caliburn.Micro.Start - Includes Caliburn.Micro plus a starting bootstrapper, view model and view. Caliburn.Micro.Container – The Caliburn.Micro invers...DirectX Tool Kit: November 15, 2012: November 15, 2012 Added support for WIC2 when available on Windows 8 and Windows 7 with KB 2670838 Cleaned up warning level 4 warningsDotNetNuke® Community Edition CMS: 06.02.05: Major Highlights Updated the system so that it supports nested folders in the App_Code folder Updated the Global Error Handling so that when errors within the global.asax handler happen, they are caught and shown in a page displaying the original HTTP error code Fixed issue that stopped users from specifying Link URLs that open on a new window Security FixesFixed issue in the Member Directory module that could show members to non authenticated users Fixed issue in the Lists modul...fastJSON: v2.0.10: - added MonoDroid projectNew Projects1121codeplex01: Today's task is to test portal on JapaneseAgileToDo: a to do list use wpf ef sqlce!Applay: Applay is a library that allows you to wrap authorization and validation around the services of your application layer by using a dynamic proxy.ArunimaErp: Enterprise Resource Planning Software for Arunima GroupBootCMS: BootCMS makes webdevelopment easy.codeplex01: I need go out for a whileCoding4Fun's Maelstrom: Introduced at //build/ 2012, Maelstrom is Coding4Fun's latest creation. Step up to the podium and battle against your opponent in full-on stereoscopic 3D!CTCS Project 2012: 11/21/2012 @ svn repository ctodo: TODO List Management Librarydeploy-with-ease: One-click deployment tool based on DrobBox files hostingDesign Resources .NET: D-R.NET is a set of pre-built implementations of oft-recurring application designs. D-R.NET saves considerable time and money in building user-focused applications: from basic to complex. DnfWeb: dnf??Dr.Peng: dr.peng ????????。DriveKeepAlive: Managed .NET service intended to keep external hard drives "awake" for immediate access. Developed in C# with Visual Studio 2008Ecommerce Platform: Ecommerce PlatformEventManagerReset: Project created for Reset meetings.FaceComparerDistributed: project of face compare distributed versionFileSystemExplorerExample: WPF MVVM Sample applicationFinlogiK ReSharper Contrib: FinlogiK ReSharper Contrib is a plugin for ReSharper 5.1 which adds code cleanup and inspection options for static qualifiers.Gestione Lampade Votive: Gestione dei canoni annuali dei loculi cimiteriali, con stampa di comunicazioni ai contribuenti e dei bollettini di conto corrente postale (a due o tre cedole).GI_PII: HABA BABA?GIV_P2: second projectHex o'clock: Projekt kolorowego zegara.IISProcessScheduler: Schedule processes from within IIS.Image Tagger & Resizer: Resize, and text in the lower right of picture with i.e. copyright information.IT Kohvik: ITK cafe school project.jean1121codeplex01: goodKooboo3 Helper: It's a developer tutorial code for kooboo cms v3. http://kooboo.codeplex.comMAVI: mobile application for the visually impaired: bill recognition & tag and recognize objects based on a specific stickerMecanismos de Segurança Interoperáveis para Serviços Web: Esse projeto pretende desenvolver um framework que forneça requisitos de segurança de forma interoperável através de Serviços Web. Metro UI For Windows Forms: Provides a set of controls and form templates for designing user interfaces based on a similar minimalist metro style. For those who love Windows Forms.NHSmartBootstrapper: In a "fast-changing" world, your LoB application needs to be ready to change as well. The usage of NHibernate Listeners together with smart application bootstrapping, even in a complex scenario, can lead to extensible and new-feature-ready applications. Office Add-In Monitor: Office Add-in Monitor protects add-ins from being disabled.Orchard Responsive Theme Machine: A responsive version of the Orchard CMS "Theme Machine" which is commonly used as a starting point for building custom themes. Supports many resolutions.Orchard Simple Contact Form: An Orchard CMS module that provides a simple contact form that sends an email. It can be used as either a content part or widget.Peon War: Peon war is a game where peons are fighting.Project Files Linker (VS Add-In): PFL project is used to generate multiple projects with links to the same files to achieve projects for different .NET FW versions.Quibbler - Universal News Reader: Quibbler is a product designed and developed by Indigo Architects. Quibbler is a desktop application which runs on user's machine and provides a intuitive user interface for reading news in offline mode. Quibbler is developed in WPF (.Net 3.5).Samcrypt: .SenchaTest: SenchaTestShared Genomics Project - Workbench Codebase: The Shared Genomics workbench enables a diverse user group of researchers to explore the associations between genetic and other factors in their datasets. It provides a graphical user interface to the analysis functions published in a sister Codeplex project i.e. MPI Codebase.SharePoint 2013 FBA Pack: This is the home of the SharePoint 2013 FBA Pack. The FBA Pack for SharePoint 2013 is currently in development and is coming soon.SharePoint Term Store PowerShell Backup & Restore Scripts: This project is focused on development of PowerShell script tools for backup and restore of SharePoint Managed Metadata service application Term Store taxonomy.SharpPlanets: A simple game completely designed and written in C#, inspired by JPlanets.SpaceShooter: A small hobbyist game. It is similar to the 2D Arcade shooter games.Stretched Background Image jQuery plugin: jQuery plugin for adding a stretched background image for any element in a web page. Uses an absolutely positioned image at z-index -1.Stsadm Templates for Visual Studio: The Stsadm Templates for Visual Studio 2005 and 2008 support you in making command extensions for SharePoint's commnand line tool stsadm.exe.SwissPost EasyTrack API: The SwissPost EasyTrack API allows you to track your parcels or letters everytime and in every application.System.Threading.Joins: The Joins project provides asynchronous concurrency semantics based on join calculus and modeled after the Microsoft Research C? (C Omega) project.T nagu Tetris: Meie versioon tuntud mängust tetris.testdd11202012tfs01: juktestddhg11202012hg01: stesttom11202012git02: fdsfdstesttom11202012hg01: gfdTetrissimus: Tetrissimus is an open source "Tetris" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses keyboard. This cross-platform and cross-browser game was tested under BeOS, Linux, NetBSD, OpenBSD, FreeBSD, Windows and others.Thrift Client .NET for WinRT (Windows Store Apps): thrift .net client for WinRT applicationTwitter Bootstrap for SharePoint: A Masterpage for SharePoint 2010 including the twitter bootstrap front-end frameworkTX Spell .NET ActiveX Package: TX Spell .NET ActiveX Package enables you to add high-performance spell checking capabilities to your VB6 applications.USB ACCELEROMETER: This project is a test demo for usb accelerometer. Application plays music (mp3 file) while usb acc gives high values from its coordinate between interval.VfaAccoutApps: Cash Payment Application of Vf AsiaVisualPoint Use PowerPoint inside Visual Studio: VisualPoint lets you show PowerPoint presentations from inside Visual Studio. Future release will automate walkthroughs and presentations.VS2010 Rc1 Fix: Illustrates a fix for working with the ASAP.NET Wizard control with VS2010 RC1WebSite.Request: WebSite.Request launch web request (via XMLHTTP) on website. Use, for example, to make initial request to sharepoint URL and escape "slow first request" problem.WPF Checked ListBox: This is simple implementation of WPF Checked ListBoxWPortal: doing nothing. that's it. i just want to use the subversion management. XNA Capture the Flag for the Microsoft Zune: Capture the Flag is a 2d Capture the flag game made for the Zune platform using XNA 3.0 CTP. Players choose to join or start a network session in the main menu. When in game, the player uses left or right on the DPad to choose the team on which to play with. Once sides have been chosen the party leader presses the center button on the Dpad to start the game. Teams switch between offense and defense for a total of 4 rounds in each game. When the game is over the party leader simply presses th...XPS Indexer: Xps file indexing for Google Desktop

    Read the article

  • Windows Azure: Announcing release of Windows Azure SDK 2.2 (with lots of goodies)

    - by ScottGu
    Earlier today I blogged about a big update we made today to Windows Azure, and some of the great new features it provides. Today I’m also excited to also announce the release of the Windows Azure SDK 2.2. Today’s SDK release adds even more great features including: Visual Studio 2013 Support Integrated Windows Azure Sign-In support within Visual Studio Remote Debugging Cloud Services with Visual Studio Firewall Management support within Visual Studio for SQL Databases Visual Studio 2013 RTM VM Images for MSDN Subscribers Windows Azure Management Libraries for .NET Updated Windows Azure PowerShell Cmdlets and ScriptCenter The below post has more details on what’s available in today’s Windows Azure SDK 2.2 release.  Also head over to Channel 9 to see the new episode of the Visual Studio Toolbox show that will be available shortly, and which highlights these features in a video demonstration. Visual Studio 2013 Support Version 2.2 of the Window Azure SDK is the first official version of the SDK to support the final RTM release of Visual Studio 2013. If you installed the 2.1 SDK with the Preview of Visual Studio 2013 we recommend that you upgrade your projects to SDK 2.2.  SDK 2.2 also works side by side with the SDK 2.0 and SDK 2.1 releases on Visual Studio 2012: Integrated Windows Azure Sign In within Visual Studio Integrated Windows Azure Sign-In support within Visual Studio is one of the big improvements added with this Windows Azure SDK release.  Integrated sign-in support enables developers to develop/test/manage Windows Azure resources within Visual Studio without having to download or use management certificates.  You can now just right-click on the “Windows Azure” icon within the Server Explorer inside Visual Studio and choose the “Connect to Windows Azure” context menu option to connect to Windows Azure: Doing this will prompt you to enter the email address of the account you wish to sign-in with: You can use either a Microsoft Account (e.g. Windows Live ID) or an Organizational account (e.g. Active Directory) as the email.  The dialog will update with an appropriate login prompt depending on which type of email address you enter: Once you sign-in you’ll see the Windows Azure resources that you have permissions to manage show up automatically within the Visual Studio Server Explorer (and you can start using them): With this new integrated sign in experience you are now able to publish web apps, deploy VMs and cloud services, use Windows Azure diagnostics, and fully interact with your Windows Azure services within Visual Studio without the need for a management certificate.  All of the authentication is handled using the Windows Azure Active Directory associated with your Windows Azure account (details on this can be found in my earlier blog post). Integrating authentication this way end-to-end across the Service Management APIs + Dev Tools + Management Portal + PowerShell automation scripts enables a much more secure and flexible security model within Windows Azure, and makes it much more convenient to securely manage multiple developers + administrators working on a project.  It also allows organizations and enterprises to use the same authentication model that they use for their developers on-premises in the cloud.  It also ensures that employees who leave an organization immediately lose access to their company’s cloud based resources once their Active Directory account is suspended. Filtering/Subscription Management Once you login within Visual Studio, you can filter which Windows Azure subscriptions/regions are visible within the Server Explorer by right-clicking the “Filter Services” context menu within the Server Explorer.  You can also use the “Manage Subscriptions” context menu to mange your Windows Azure Subscriptions: Bringing up the “Manage Subscriptions” dialog allows you to see which accounts you are currently using, as well as which subscriptions are within them: The “Certificates” tab allows you to continue to import and use management certificates to manage Windows Azure resources as well.  We have not removed any functionality with today’s update – all of the existing scenarios that previously supported management certificates within Visual Studio continue to work just fine.  The new integrated sign-in support provided with today’s release is purely additive. Note: the SQL Database node and the Mobile Service node in Server Explorer do not support integrated sign-in at this time. Therefore, you will only see databases and mobile services under those nodes if you have a management certificate to authorize access to them.  We will enable them with integrated sign-in in a future update. Remote Debugging Cloud Resources within Visual Studio Today’s Windows Azure SDK 2.2 release adds support for remote debugging many types of Windows Azure resources. With live, remote debugging support from within Visual Studio, you are now able to have more visibility than ever before into how your code is operating live in Windows Azure.  Let’s walkthrough how to enable remote debugging for a Cloud Service: Remote Debugging of Cloud Services To enable remote debugging for your cloud service, select Debug as the Build Configuration on the Common Settings tab of your Cloud Service’s publish dialog wizard: Then click the Advanced Settings tab and check the Enable Remote Debugging for all roles checkbox: Once your cloud service is published and running live in the cloud, simply set a breakpoint in your local source code: Then use Visual Studio’s Server Explorer to select the Cloud Service instance deployed in the cloud, and then use the Attach Debugger context menu on the role or to a specific VM instance of it: Once the debugger attaches to the Cloud Service, and a breakpoint is hit, you’ll be able to use the rich debugging capabilities of Visual Studio to debug the cloud instance remotely, in real-time, and see exactly how your app is running in the cloud. Today’s remote debugging support is super powerful, and makes it much easier to develop and test applications for the cloud.  Support for remote debugging Cloud Services is available as of today, and we’ll also enable support for remote debugging Web Sites shortly. Firewall Management Support with SQL Databases By default we enable a security firewall around SQL Databases hosted within Windows Azure.  This ensures that only your application (or IP addresses you approve) can connect to them and helps make your infrastructure secure by default.  This is great for protection at runtime, but can sometimes be a pain at development time (since by default you can’t connect/manage the database remotely within Visual Studio if the security firewall blocks your instance of VS from connecting to it). One of the cool features we’ve added with today’s release is support that makes it easy to enable and configure the security firewall directly within Visual Studio.  Now with the SDK 2.2 release, when you try and connect to a SQL Database using the Visual Studio Server Explorer, and a firewall rule prevents access to the database from your machine, you will be prompted to add a firewall rule to enable access from your local IP address: You can simply click Add Firewall Rule and a new rule will be automatically added for you. In some cases, the logic to detect your local IP may not be sufficient (for example: you are behind a corporate firewall that uses a range of IP addresses) and you may need to set up a firewall rule for a range of IP addresses in order to gain access. The new Add Firewall Rule dialog also makes this easy to do.  Once connected you’ll be able to manage your SQL Database directly within the Visual Studio Server Explorer: This makes it much easier to work with databases in the cloud. Visual Studio 2013 RTM Virtual Machine Images Available for MSDN Subscribers Last week we released the General Availability Release of Visual Studio 2013 to the web.  This is an awesome release with a ton of new features. With today’s Windows Azure update we now have a set of pre-configured VM images of VS 2013 available within the Windows Azure Management Portal for use by MSDN customers.  This enables you to create a VM in the cloud with VS 2013 pre-installed on it in with only a few clicks: Windows Azure now provides the fastest and easiest way to get started doing development with Visual Studio 2013. Windows Azure Management Libraries for .NET (Preview) Having the ability to automate the creation, deployment, and tear down of resources is a key requirement for applications running in the cloud.  It also helps immensely when running dev/test scenarios and coded UI tests against pre-production environments. Today we are releasing a preview of a new set of Windows Azure Management Libraries for .NET.  These new libraries make it easy to automate tasks using any .NET language (e.g. C#, VB, F#, etc).  Previously this automation capability was only available through the Windows Azure PowerShell Cmdlets or to developers who were willing to write their own wrappers for the Windows Azure Service Management REST API. Modern .NET Developer Experience We’ve worked to design easy-to-understand .NET APIs that still map well to the underlying REST endpoints, making sure to use and expose the modern .NET functionality that developers expect today: Portable Class Library (PCL) support targeting applications built for any .NET Platform (no platform restriction) Shipped as a set of focused NuGet packages with minimal dependencies to simplify versioning Support async/await task based asynchrony (with easy sync overloads) Shared infrastructure for common error handling, tracing, configuration, HTTP pipeline manipulation, etc. Factored for easy testability and mocking Built on top of popular libraries like HttpClient and Json.NET Below is a list of a few of the management client classes that are shipping with today’s initial preview release: .NET Class Name Supports Operations for these Assets (and potentially more) ManagementClient Locations Credentials Subscriptions Certificates ComputeManagementClient Hosted Services Deployments Virtual Machines Virtual Machine Images & Disks StorageManagementClient Storage Accounts WebSiteManagementClient Web Sites Web Site Publish Profiles Usage Metrics Repositories VirtualNetworkManagementClient Networks Gateways Automating Creating a Virtual Machine using .NET Let’s walkthrough an example of how we can use the new Windows Azure Management Libraries for .NET to fully automate creating a Virtual Machine. I’m deliberately showing a scenario with a lot of custom options configured – including VHD image gallery enumeration, attaching data drives, network endpoints + firewall rules setup - to show off the full power and richness of what the new library provides. We’ll begin with some code that demonstrates how to enumerate through the built-in Windows images within the standard Windows Azure VM Gallery.  We’ll search for the first VM image that has the word “Windows” in it and use that as our base image to build the VM from.  We’ll then create a cloud service container in the West US region to host it within: We can then customize some options on it such as setting up a computer name, admin username/password, and hostname.  We’ll also open up a remote desktop (RDP) endpoint through its security firewall: We’ll then specify the VHD host and data drives that we want to mount on the Virtual Machine, and specify the size of the VM we want to run it in: Once everything has been set up the call to create the virtual machine is executed asynchronously In a few minutes we’ll then have a completely deployed VM running on Windows Azure with all of the settings (hard drives, VM size, machine name, username/password, network endpoints + firewall settings) fully configured and ready for us to use: Preview Availability via NuGet The Windows Azure Management Libraries for .NET are now available via NuGet. Because they are still in preview form, you’ll need to add the –IncludePrerelease switch when you go to retrieve the packages. The Package Manager Console screen shot below demonstrates how to get the entire set of libraries to manage your Windows Azure assets: You can also install them within your .NET projects by right clicking on the VS Solution Explorer and using the Manage NuGet Packages context menu command.  Make sure to select the “Include Prerelease” drop-down for them to show up, and then you can install the specific management libraries you need for your particular scenarios: Open Source License The new Windows Azure Management Libraries for .NET make it super easy to automate management operations within Windows Azure – whether they are for Virtual Machines, Cloud Services, Storage Accounts, Web Sites, and more.  Like the rest of the Windows Azure SDK, we are releasing the source code under an open source (Apache 2) license and it is hosted at https://github.com/WindowsAzure/azure-sdk-for-net/tree/master/libraries if you wish to contribute. PowerShell Enhancements and our New Script Center Today, we are also shipping Windows Azure PowerShell 0.7.0 (which is a separate download). You can find the full change log here. Here are some of the improvements provided with it: Windows Azure Active Directory authentication support Script Center providing many sample scripts to automate common tasks on Windows Azure New cmdlets for Media Services and SQL Database Script Center Windows Azure enables you to script and automate a lot of tasks using PowerShell.  People often ask for more pre-built samples of common scenarios so that they can use them to learn and tweak/customize. With this in mind, we are excited to introduce a new Script Center that we are launching for Windows Azure. You can learn about how to scripting with Windows Azure with a get started article. You can then find many sample scripts across different solutions, including infrastructure, data management, web, and more: All of the sample scripts are hosted on TechNet with links from the Windows Azure Script Center. Each script is complete with good code comments, detailed descriptions, and examples of usage. Summary Visual Studio 2013 and the Windows Azure SDK 2.2 make it easier than ever to get started developing rich cloud applications. Along with the Windows Azure Developer Center’s growing set of .NET developer resources to guide your development efforts, today’s Windows Azure SDK 2.2 release should make your development experience more enjoyable and efficient. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today.  Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

    Read the article

  • Running SSIS packages from C#

    - by Piotr Rodak
    Most of the developers and DBAs know about two ways of deploying packages: You can deploy them to database server and run them using SQL Server Agent job or you can deploy the packages to file system and run them using dtexec.exe utility. Both approaches have their pros and cons. However I would like to show you that there is a third way (sort of) that is often overlooked, and it can give you capabilities the ‘traditional’ approaches can’t. I have been working for a few years with applications that run packages from host applications that are implemented in .NET. As you know, SSIS provides programming model that you can use to implement more flexible solutions. SSIS applications are usually thought to be batch oriented, with fairly rigid architecture and processing model, with fixed timeframes when the packages are executed to process data. It doesn’t to be the case, you don’t have to limit yourself to batch oriented architecture. I have very good experiences with service oriented architectures processing large amounts of data. These applications are more complex than what I would like to show here, but the principle stays the same: you can execute packages as a service, on ad-hoc basis. You can also implement and schedule various signals, HTTP calls, file drops, time schedules, Tibco messages and other to run the packages. You can implement event handler that will trigger execution of SSIS when a certain event occurs in StreamInsight stream. This post is just a small example of how you can use the API and other features to create a service that can run SSIS packages on demand. I thought it might be a good idea to implement a restful service that would listen to requests and execute appropriate actions. As it turns out, it is trivial in C#. The application is implemented as console application for the ease of debugging and running. In reality, you might want to implement the application as Windows service. To begin, you have to reference namespace System.ServiceModel.Web and then add a few lines of code: Uri baseAddress = new Uri("http://localhost:8011/");               WebServiceHost svcHost = new WebServiceHost(typeof(PackRunner), baseAddress);                           try             {                 svcHost.Open();                   Console.WriteLine("Service is running");                 Console.WriteLine("Press enter to stop the service.");                 Console.ReadLine();                   svcHost.Close();             }             catch (CommunicationException cex)             {                 Console.WriteLine("An exception occurred: {0}", cex.Message);                 svcHost.Abort();             } The interesting lines are 3, 7 and 13. In line 3 you create a WebServiceHost object. In line 7 you start listening on the defined URL and then in line 13 you shut down the service. As you have noticed, the WebServiceHost constructor is accepting type of an object (here: PackRunner) that will be instantiated as singleton and subsequently used to process the requests. This is the class where you put your logic, but to tell WebServiceHost how to use it, the class must implement an interface which declares methods to be used by the host. The interface itself must be ornamented with attribute ServiceContract. [ServiceContract]     public interface IPackRunner     {         [OperationContract]         [WebGet(UriTemplate = "runpack?package={name}")]         string RunPackage1(string name);           [OperationContract]         [WebGet(UriTemplate = "runpackwithparams?package={name}&rows={rows}")]         string RunPackage2(string name, int rows);     } Each method that is going to be used by WebServiceHost has to have attribute OperationContract, as well as WebGet or WebInvoke attribute. The detailed discussion of the available options is outside of scope of this post. I also recommend using more descriptive names to methods . Then, you have to provide the implementation of the interface: public class PackRunner : IPackRunner     {         ... There are two methods defined in this class. I think that since the full code is attached to the post, I will show only the more interesting method, the RunPackage2.   /// <summary> /// Runs package and sets some of its variables. /// </summary> /// <param name="name">Name of the package</param> /// <param name="rows">Number of rows to export</param> /// <returns></returns> public string RunPackage2(string name, int rows) {     try     {         string pkgLocation = ConfigurationManager.AppSettings["PackagePath"];           pkgLocation = Path.Combine(pkgLocation, name.Replace("\"", ""));           Console.WriteLine();         Console.WriteLine("Calling package {0} with parameter {1}.", name, rows);                  Application app = new Application();         Package pkg = app.LoadPackage(pkgLocation, null);           pkg.Variables["User::ExportRows"].Value = rows;         DTSExecResult pkgResults = pkg.Execute();         Console.WriteLine();         Console.WriteLine(pkgResults.ToString());         if (pkgResults == DTSExecResult.Failure)         {             Console.WriteLine();             Console.WriteLine("Errors occured during execution of the package:");             foreach (DtsError er in pkg.Errors)                 Console.WriteLine("{0}: {1}", er.ErrorCode, er.Description);             Console.WriteLine();             return "Errors occured during execution. Contact your support.";         }                  Console.WriteLine();         Console.WriteLine();         return "OK";     }     catch (Exception ex)     {         Console.WriteLine(ex);         return ex.ToString();     } }   The method accepts package name and number of rows to export. The packages are deployed to the file system. The path to the packages is configured in the application configuration file. This way, you can implement multiple services on the same machine, provided you also configure the URL for each instance appropriately. To run a package, you have to reference Microsoft.SqlServer.Dts.Runtime namespace. This namespace is implemented in Microsoft.SQLServer.ManagedDTS.dll which in my case was installed in the folder “C:\Program Files (x86)\Microsoft SQL Server\100\SDK\Assemblies”. Once you have done it, you can create an instance of Microsoft.SqlServer.Dts.Runtime.Application as in line 18 in the above snippet. It may be a good idea to create the Application object in the constructor of the PackRunner class, to avoid necessity of recreating it each time the service is invoked. Then, in line 19 you see that an instance of Microsoft.SqlServer.Dts.Runtime.Package is created. The method LoadPackage in its simplest form just takes package file name as the first parameter. Before you run the package, you can set its variables to certain values. This is a great way of configuring your packages without all the hassle with dtsConfig files. In the above code sample, variable “User:ExportRows” is set to value of the parameter “rows” of the method. Eventually, you execute the package. The method doesn’t throw exceptions, you have to test the result of execution yourself. If the execution wasn’t successful, you can examine collection of errors exposed by the package. These are the familiar errors you often see during development and debugging of the package. I you run the package from the code, you have opportunity to persist them or log them using your favourite logging framework. The package itself is very simple; it connects to my AdventureWorks database and saves number of rows specified in variable “User::ExportRows” to a file. You should know that before you run the package, you can change its connection strings, logging, events and many more. I attach solution with the test service, as well as a project with two test packages. To test the service, you have to run it and wait for the message saying that the host is started. Then, just type (or copy and paste) the below command to your browser. http://localhost:8011/runpackwithparams?package=%22ExportEmployees.dtsx%22&rows=12 When everything works fine, and you modified the package to point to your AdventureWorks database, you should see "OK” wrapped in xml: I stopped the database service to simulate invalid connection string situation. The output of the request is different now: And the service console window shows more information: As you see, implementing service oriented ETL framework is not a very difficult task. You have ability to configure the packages before you run them, you can implement logging that is consistent with the rest of your system. In application I have worked with we also have resource monitoring and execution control. We don’t allow to run more than certain number of packages to run simultaneously. This ensures we don’t strain the server and we use memory and CPUs efficiently. The attached zip file contains two projects. One is the package runner. It has to be executed with administrative privileges as it registers HTTP namespace. The other project contains two simple packages. This is really a cool thing, you should check it out!

    Read the article

  • Sharing Bandwidth and Prioritizing Realtime Traffic via HTB, Which Scenario Works Better?

    - by Mecki
    I would like to add some kind of traffic management to our Internet line. After reading a lot of documentation, I think HFSC is too complicated for me (I don't understand all the curves stuff, I'm afraid I will never get it right), CBQ is not recommend, and basically HTB is the way to go for most people. Our internal network has three "segments" and I'd like to share bandwidth more or less equally between those (at least in the beginning). Further I must prioritize traffic according to at least three kinds of traffic (realtime traffic, standard traffic, and bulk traffic). The bandwidth sharing is not as important as the fact that realtime traffic should always be treated as premium traffic whenever possible, but of course no other traffic class may starve either. The question is, what makes more sense and also guarantees better realtime throughput: Creating one class per segment, each having the same rate (priority doesn't matter for classes that are no leaves according to HTB developer) and each of these classes has three sub-classes (leaves) for the 3 priority levels (with different priorities and different rates). Having one class per priority level on top, each having a different rate (again priority won't matter) and each having 3 sub-classes, one per segment, whereas all 3 in the realtime class have highest prio, lowest prio in the bulk class, and so on. I'll try to make this more clear with the following ASCII art image: Case 1: root --+--> Segment A | +--> High Prio | +--> Normal Prio | +--> Low Prio | +--> Segment B | +--> High Prio | +--> Normal Prio | +--> Low Prio | +--> Segment C +--> High Prio +--> Normal Prio +--> Low Prio Case 2: root --+--> High Prio | +--> Segment A | +--> Segment B | +--> Segment C | +--> Normal Prio | +--> Segment A | +--> Segment B | +--> Segment C | +--> Low Prio +--> Segment A +--> Segment B +--> Segment C Case 1 Seems like the way most people would do it, but unless I don't read the HTB implementation details correctly, Case 2 may offer better prioritizing. The HTB manual says, that if a class has hit its rate, it may borrow from its parent and when borrowing, classes with higher priority always get bandwidth offered first. However, it also says that classes having bandwidth available on a lower tree-level are always preferred to those on a higher tree level, regardless of priority. Let's assume the following situation: Segment C is not sending any traffic. Segment A is only sending realtime traffic, as fast as it can (enough to saturate the link alone) and Segment B is only sending bulk traffic, as fast as it can (again, enough to saturate the full link alone). What will happen? Case 1: Segment A-High Prio and Segment B-Low Prio both have packets to send, since A-High Prio has the higher priority, it will always be scheduled first, till it hits its rate. Now it tries to borrow from Segment A, but since Segment A is on a higher level and Segment B-Low Prio has not yet hit its rate, this class is now served first, till it also hits the rate and wants to borrow from Segment B. Once both have hit their rates, both are on the same level again and now Segment A-High Prio is going to win again, until it hits the rate of Segment A. Now it tries to borrow from root (which has plenty of traffic spare, as Segment C is not using any of its guaranteed traffic), but again, it has to wait for Segment B-Low Prio to also reach the root level. Once that happens, priority is taken into account again and this time Segment A-High Prio will get all the bandwidth left over from Segment C. Case 2: High Prio-Segment A and Low Prio-Segment B both have packets to send, again High Prio-Segment A is going to win as it has the higher priority. Once it hits its rate, it tries to borrow from High Prio, which has bandwidth spare, but being on a higher level, it has to wait for Low Prio-Segment B again to also hit its rate. Once both have hit their rate and both have to borrow, High Prio-Segment A will win again until it hits the rate of the High Prio class. Once that happens, it tries to borrow from root, which has again plenty of bandwidth left (all bandwidth of Normal Prio is unused at the moment), but it has to wait again until Low Prio-Segment B hits the rate limit of the Low Prio class and also tries to borrow from root. Finally both classes try to borrow from root, priority is taken into account, and High Prio-Segment A gets all bandwidth root has left over. Both cases seem sub-optimal, as either way realtime traffic sometimes has to wait for bulk traffic, even though there is plenty of bandwidth left it could borrow. However, in case 2 it seems like the realtime traffic has to wait less than in case 1, since it only has to wait till the bulk traffic rate is hit, which is most likely less than the rate of a whole segment (and in case 1 that is the rate it has to wait for). Or am I totally wrong here? I thought about even simpler setups, using a priority qdisc. But priority queues have the big problem that they cause starvation if they are not somehow limited. Starvation is not acceptable. Of course one can put a TBF (Token Bucket Filter) into each priority class to limit the rate and thus avoid starvation, but when doing so, a single priority class cannot saturate the link on its own any longer, even if all other priority classes are empty, the TBF will prevent that from happening. And this is also sub-optimal, since why wouldn't a class get 100% of the line's bandwidth if no other class needs any of it at the moment? Any comments or ideas regarding this setup? It seems so hard to do using standard tc qdiscs. As a programmer it was such an easy task if I could simply write my own scheduler (which I'm not allowed to do).

    Read the article

  • CodePlex Daily Summary for Monday, June 27, 2011

    CodePlex Daily Summary for Monday, June 27, 2011Popular ReleasesSQL Compact Bulk Insert Library: beta 2.0: Update, with ColumnMappings and support for IEnumerable implemented (for most data types, anyway).MiniTwitter: 1.71: MiniTwitter 1.71 ???? ?? OAuth ???????????? ????????、??????????????????? ???????????????????????SizeOnDisk: 1.0.10.0: Fix: issue 327: size format error when save settings Fix: some UI bindings trouble (sorting, refresh) Fix: user settings file deletion when corrupted Feature: TreeView virtualization (better speed with many folders) Feature: New file type DataGrid column Feature: In KByte view, show size of file < 1024B and > 0 with 3 decimal Feature: New language: Italian Task: Cleanup for speedRawr: Rawr 4.2.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...HD-Trailers.NET Downloader: HD-Trailer.net Downloader 1.86: This version implements a new config flag "ConsiderTheatricalandNumberedTrailersasIdentical" that for the purposes of Exclusions only Teaser Trailer and one Trailer (named Trailer, Theatrical Traler Trailer No. 1, Trailer 1, Trailer No. 2, etc) will be downloaded. This also includes a bug fix where the .nfo file did not include the -trailer if configured for XBMC.N2 CMS: 2.2: * Web platform installer support available ** Nuget support available What's newDinamico Templates (beta) - an MVC3 & Razor based template pack using the template-first! development paradigm Boilerplate CSS & HTML5 Advanced theming with css comipilation (concrete, dark, roadwork, terracotta) Template-first! development style Content, news, listing, slider, image sizes, search, sitemap, globalization, youtube, google map Display Tokens - replaces text tokens with rendered content (usag...TerrariViewer: TerrariViewer v4.0 [Terraria Inventory Editor]: Version 4.0 Changelog Continued support for Terraria v1.0.5 Fixed image display problem (Major Issue) Added Buff tabs to allowed editing character buffs Added support for displays whose DPI is set to 120 (Major Issue) Added support for screen resolutions that are horizontally smaller than 1280 (Major Issue) Changed the way users will select replacement items on multiple tabs Added items that were missing in the latest Terraria update Fixed various other bugsCoding4Fun Tools: Coding4Fun.Phone.Toolkit v1.4.2: All color pickers can have value set now and UX updates Bunch of fixes - see check-in notes and associated bugsMosaic Project: Mosaic Alpha Build 256: - Improved support for HTML widgets - Added options support for HTML widgets - Added hubs support for all widgets - Added Lock widget which shows Windows 8 like lock screen when you click on it - Added HTML Today widget (by Daniel Steiner)NCalc - Mathematical Expressions Evaluator for .NET: NCalc - 1.3.7: Fixing overflow when comparing long values Circuit Diagram: Circuit Diagram v0.5 Beta: New in this release: New components: Ammeter (meter) Voltmeter (meter) Undo/redo functionality for placing/moving components Choose resolution when exporting PNG image New logothinktecture WSCF.blue: WSCF.blue V1 Update (1.0.12): Features Added a new AutoSetSpecifiedPropertiesDecorator to automatically set the _Specified property to true when setter on matching property is called. Obviously this will only work when the Properties option is used. Bug Fixes Reduced the number of times menu visibility is updated in the SelectionEvents.OnChange event to help prevent OutOfMemoryException inside EnvDTE. Fixed NullReferenceException in OnTypeNameChanged method of MessageContractConverter. Improved validation of namespac....Net Image Processor: v1.0: Initial release of the library containing the core architecture and two filters. To install, extract the library to somewhere sensible then reference as a file from your project in Visual Studio.KinectNUI: Jun 25 Alpha Release: Initial public version. No installer needed, just run the EXE.Media Companion: MC 3.409b-1 Weekly: This weeks release is part way through a major rewrite of the TVShow code. This means that a few TV related features & functions are not fully operational at the moment. The reason for this release is so that people can see if their particular issue has been fixed during the week. Some issues may not be able to be fully checked due to the ongoing TV code refactoring. So, I would strongly suggest that you put this version into a separate folder, copy your settings folder across & test MC that...Terraria World Viewer: Version 1.5: Update June 24th Made compatible with the new tiles found in Terraria 1.0.5CuttingEdge.Conditions: CuttingEdge.Conditions v1.2: CuttingEdge.Conditions is a library that helps developers to write pre- and postcondition validations in their C# 3.0 and VB.NET 9 code base. Writing these validations is easy and it improves the readability and maintainability of code. This release adds IsNullOrWhiteSpace and IsNotNullOrWhiteSpace extension methods for string arguments and a adds a WithExceptionOnFailure<TException>() method on the Condition class which allows users to specify the type of exception that will be thrown. Fo...patterns & practices: Project Silk: Project Silk Community Drop 12 - June 22, 2011: Changes from previous drop: Minor code changes. New "Introduction" chapter. New "Modularity" chapter. Updated "Architecture" chapter. Updated "Server-Side Implementation" chapter. Updated "Client Data Management and Caching" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To ins...DotNetNuke® Community Edition: 06.00.00 Beta: Beta 1 (Build 2300) includes many important enhancements to the user experience. The control panel has been updated for easier access to the most important features and additional forms have been adapted to the new pattern. This release also includes many bug fixes that make it more stable than previous CTP releases. Beta ForumsAcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta7: ??AcDown???????????????,?????????????????????。????????????????????,??Acfun、Bilibili、???、???、?????,???????????、???????。 AcDown???????????????????????????,???,???????????????????。 AcDown???????C#??,?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??:????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64),?????"?????????"??? ??????????????,??????????: ??"AcDown?????"????????? ??v3.0 Beta7 ????????????? ???? ?? ????????????????? "??????"?????"?...New Projects.Net Micro Framework Contrib Library: Contrib library for the .Net Micro Framework..NET Notepad: this is my version of notepadAntLifeISEN: Projet de Découverte MISN P54 Simulation du comportement des fourmisApuracao AG: Estudos asp.net com MCV3apuracaoIK: estudos asp.net desenvolvimento manual;Bikirom BikiSoft: BikiRom BikiSoft windows interface to the BikiRom Megaboard series of real-time ecu retuning hardware.BlogSource: Blog Source.Carmilla Learning: Lessons for Camille Dollé, sup in Epita.Debug Single Thread: This Visual Studio 2010 extension adds two shortcuts and toolbar buttons to allow developers to easily focus on single threads while debugging multi-threaded applications. It dramatically reduces the need to manually go into the Threads window to freeze/thaw all threads but the one that needs to be followed, and therefore helps improve productivity. Features: - Restrict further execution to the current thread only. Will freeze all other threads. Shortcut: CTRL+T+T or snowflake button. -...Excel Viewer: Excel Viewer is a .net component that allows programmers to load excel application and also excel spreadsheets in our windows form. This component is useful for viewing excel reports in applications. This component is written in C# 2.0.Image Processor: The Image Processor in C#jQuery Mobile Extensions for ASP.Net MVC: jQMvc is a collection of extensions built on jQuery Mobile (currently in beta) that can be used with ASP.Net MVC to produce HTML5 based mobile applications. With jQMvc we'll be able to do the neat and powerful MVC stuff but for the emerging world of mobile HTML5 applications.just Think: This is about how to use ***** data for make a application on *****.Kinkuma Framework F# (Prism based F# MVVM Support Library): Kinkuma Framework?????F#?ViewModel?Model??????????????????????。Leuphana MyStudy Mobile: MyStudy schedule at your finger tips. Brings your Leuphana MyStudy schedule to your windows phone 7.maxtor1234test: this is my testMayhemModules: This project contains the modules from the Mayhem repository.PlaOrganizer: PLA Organizer helps create and manage playlist that is based on the PLA format. PowerSys: My Super PowerSystemSilverlight out-of-browser Contoso Dashboard: This is a small demonstration of the capabilities of Silverlight's out of browser mode. This projet includes : - Notification Windows - Unrestricted access to network (netTcpBinding) - Automatic updates (provided that you create your own trusted certificate) - Excel and Outlook Interop - Access to file system - Fullscreen modeSimple Binding Framework: Simple binding frameworkSimply BackUp Tool: A simple tool for backing up personal folders that is built in .Net with WPF. The tool will be updated for using latest techniques and technologies. In partnership with: http://www.ganahtech.comSoftware Botany Ivy - String Utils with CSV, Delimited, & Positional Text Parser: The Software Botany Ivy project is a library containing various string utilities. Included in the library are fluent APIs for parsing and creating delimited and fixed width positional text. Quoted CSV is supported. The library is built on .NET 4.0 using the C# language.Software Botany Sunlight - Word Aligned Hybrid Bit Vector Search Framework: The Software Botany Sunlight project is a search framework built using Word Aligned Hybrid Bit Vectors. Its sole purpose is to provide high performance in-memory searching of data using unknown combinations of indices. It is developed with .NET 4.0 using C#.Torrent file parsing, editing, and writing library: A fully functional library for reading and parsing bencode'd files (ie .torrent) into a fully editable DOM. Work with custom bencode'd file formats, or use strongly typed torrent file reading, modification, and writing. Written in C#.Tweeting Attendant: The Tweeting Attendant is a project created for the Adafruit Make It Tweet Challenge.UBL Larsen: UBL Larsen is a C# .NET 4.0 Class Library for reading/writing Universal Business Language (UBL) xml documents. No xml parsing is required. XmlSerializer will take care of the streaming for you. The library is custom generated from the "UBL 2.0 updated" xsd files to resemble the layout of the Oasis xsd file hierarchy. Some optimizations have been made in order to improve streaming speed and ease the job of for the developer. All of the types in Common Basic Components have been replaced. O...WenbianAsk: Ask system using WPF WP7 Transfer Data Tool: This tool is used to transfer data from PC to WP7. ???????: ?????

    Read the article

  • CodePlex Daily Summary for Friday, March 23, 2012

    CodePlex Daily Summary for Friday, March 23, 2012Popular ReleasesSSIS Multiple Hash: Multiple Hash V1.4.1: This is a feature release. It adds the ability to select multiple rows, and change the selection of these with a single click in the check box. All lists with check boxes have this ability. It is backwards compatible with previous versions. Please ensure that you select the appropriate download file based on the version of SQL Server that you will be using. If you have used the Denali installer from V1.4 for packages that you wish to now use the SQL 2012 release version, then you MUST ma...SQL Monitor - managing sql server performance: SQLMon 4.2 alpha 14: 1. improved accuracy of logic fault checking in analysisMetodología General Ajustada - MGA: 02.02.02: Cambios John: Cambios en los cálculos del Flujo de Caja, Flujo Económico y Resumen EF y ES. Se visualiza el reporte de Resumen EF y ES en Grilla. Se ajustan formularios de llamado. Cambios Parmenio: Cambios en el formularios de Programaciòn.MapWindow 6 Desktop GIS: MapWindow 6.1.1: MapWindow 6 Desktop GIS is an open source desktop GIS for Microsoft Windows that is built upon the DotSpatial Library. This release requires .Net 4 (Client Profile). Are you a software developer?Instead of downloading MapWindow for development purposes, get started with with the DotSpatial templateDotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...Telerik CAB Enabling Kit for RadControls for WinForms: TCEK 2012.1.321.20: major update, new Workspaces and UIAdapters Workspaces: - RadDockWorkspace - RadPageViewWorkspace - RadFormWorkspace - RadFormMdiWorkspace - RadTabbedMdiWorkspace UI Adapters: - RadCommandBarUIAdapter - RadRibbonBarUIAdapter - RadTreeNodeUiAdapter - RadTreeViewUIAdapter - RadItemCollectionUIAdapter - (RadMenu, RadStatusStrip, all controls that support RadItem collections)Microsoft All-In-One Code Framework - a centralized code sample library: C++, .NET Coding Guideline: Microsoft All-In-One Code Framework Coding Guideline This document describes the coding style guideline for native C++ and .NET (C# and VB.NET) programming used by the Microsoft All-In-One Code Framework project team.WebDAV for WHS: Version 1.0.67: - Added: Check whether the Remote Web Access is turned on or not; - Added: Check for Add-In updates;Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (March 2012) for .NET 4.0: March release of Phalanger 3.0 significantly enhances performance, adds new features and fixes many issues. See following for the list of main improvements: New features: Phalanger Tools installable for Visual Studio 2011 Beta "filter" extension with several most used filters implemented DomDocument HTML parser, loadHTML() method mail() PHP compatible function PHP 5.4 T_CALLABLE token PHP 5.4 "callable" type hint PCRE: UTF32 characters in range support configuration supports <c...Nearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01 Visit Roadmap for more details.BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...SCCM Client Actions Tool: SCCM Client Actions Tool v1.11: SCCM Client Actions Tool v1.11 is the latest version. It comes with following changes since last version: Fixed a bug when ping and cmd.exe kept running in endless loop after action progress was finished. Fixed update checking from Codeplex RSS feed. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA...WebSocket4Net: WebSocket4Net 0.5: Changes in this release fixed the wss's default port bug improved JsonWebSocket supported set client access policy protocol for silverlight fixed a handshake issue in Silverlight fixed a bug that "Host" field in handshake hadn't contained port if the port is not default supported passing in Origin parameter for handshaking supported reacting pings from server side fixed a bug in data sending fixed the bug sending a closing handshake with no message which would cause an excepti...SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.5: Changes included in this release: supported closing handshake queue checking improved JSON subprotocol supported sending ping from server to client fixed a bug about sending a closing handshake with no message refactored the code to improve protocol compatibility fixed a bug about sub protocol configuration loading in Mono improved BasicSubProtocol added JsonWebSocketSessionSurvey™ - web survey & form engine: Survey™ 2.0: The new stable Survey™ Project 2.0.0.1 version contains many new features like: Technical changes: - Use of Jquery, ASTreeview, Tabs, Tooltips and new menuprovider Features & Bugfixes: Survey list and search function Folder structure for surveys New Menustructure Library list New Library fields User list and search functions Layout options for a survey with CSS, page header and footer New IP filter security feature Enhanced Token Management New Question fields as ID, Alias...Speed up Printer migration using PrintBrm and it's configuration files: BRMC.EXE: Run the tool from the extracted directory of the printbrm backup. You can use the following command to extract a backup file to a directory - PRINTBRM.EXE -R -D C:\TEMP\EXPAND -F C:\TEMP\PRINTERBACKUP.PRINTEREXPORTAppBarUtils for Windows Phone SDK 7.1: AppBarUtils 1.2: This release contains IconUri dependency property for both AppBarItemCommand and AppBarItemTrigger as requested by shawnoster at http://appbarutils.codeplex.com/discussions/321745. When using this IconUri dependency property, please be sure to set the Type property to AppBarItemType.Button or just omit this property entirely, because it is only for app bar icon button. The demo has been updated to show how to use this new IconUri dependency property with a new lock button on the app bar. Wh...Offline Navigation for Windows Phone 7: 0.1 Alpha: This is the 0.1 alpha release of source code.SmartNet: V1.0.0.0: DY SmartNet ?????? V1.0New Projects2Sexy Content for DotNetNuke - great looking and animated content: 2Sexy Content is a DotNetNuke Extension to create attractive and designed content. It solves the common problem, allowing the web designer to create designed templates for different content elements, so that the user must only fill in fields and receive a perfectly designed and animated output. AgileMapper: AgileMapper????????????????????,?????????dto?do???????AksiMata: Berita terbaru dan peristiwa terkini di sekitar Anda... Langsung dari TKP!Caprice: Engineering adaptive privacy: Caprice is a tool aimed at supporting software engineers in the design of applications that appropriately adapt their behaviour to mitigate privacy threats. This tool helps provide software engineers design-time insight on the functional behaviour a system and associated runtime context changes that can threaten privacy.Change default Share-site group SharePoint Online (Office 365): As default when we share a site collection or site with external users, SharePoint Online show default SharePoint groups which are Visitors and Members. By using this feature, you will get a link which you can use to customize the default groups to your custom groups and other default groups. CodePlex Test Project: This is just to test how well CodePlex handles Git.Find Work Items For Source Items (Visual Studio Extension): work4source is a Visual Studio 2010 tool window which finds and lists all TFS work items associated with a specific source control file or folder, avoiding the need to view the details for every changeset. It also includes "versioned item" links which otherwise cannot be found from the source side of the link using Visual Studio. To install run the VSIX package, restart Visual Studio, then select View --> Other Windows --> "Find Work Items for Source Items" and either leave the window ...FSProject: FSProjectGit c9 Test: testing git to c9 integration possibilitiesImage 3D Viewer: A Image 3D Viewer with WPF.Jakarta Guide: Jakarta news featuring up-to-date information on attractions, hotels, restaurants, nightlife, travel tips and more.LinqLucene: Due to the fact to the original LinqToLucene project seems to have died, I have created this new project to carry on it's workLuskyCode: Just some codemaouidatest: testMarktplace: NLocalize MarketplaceMemoryLifter: MemoryLifter - the fastest way to memorize * is a virtual flashcard system, scientifically based on the Leitner card box algorithm * enables the user to lift any kind of information into long term memory * maximizes study efficiency with automation, controlled repetitionMemoryTributary - A replacement for MemoryStream: MemoryTributary is a replacement for MemoryStream that uses multiple memory chunks as its backing store, as opposed to the single byte array used by MemoryStream. The result is it can handle much larger streams and the initial allocations are more efficient. It's developed in C#.my career muse: Project configured for simultaneous use with other developersMyMusicBox: Mini-Projet MBDS Web 2.0 Michel BuffaNucleo.NET ORM: These components provide a unit of work interface that works with LINQ to SQL, Entity Framework, and Entity Framework Code First, with more ORMs to come. The idea is to create one common wrapper and base framework to make it easier to work with the various ORM products.Orchard QnA: A lightweight discussions module for the Orchard CMS.Orchard Shoutbox: A lightweight shoutbox module for the Orchard CMS:PAIN: My projects from PAIN labs, semester 2012L, department of electronics of Warsaw University of Technology.Reactifier: This project is for the windows 8 Shoutcast MediaStreamSource: Shoutcast MediaStreamSource is a MediaStreamSource implementation of the Shoutcast protocol for Silverlight. This MediaStreamSource allows both Silverlight 4+ OOB and Windows Phone 7 applications to consume a Shoutcast stream using a MediaElement. Currently, Mp3 and AAC+ Shoutcast streams are supported on Windows Phone. However, ONLY Mp3 is supported on Desktop Silverlight. There is also limited (i.e. somewhat untested) M3u and PLS playlist support. Please report any issues playing...Simple Task Manager: Politechnika Wroclawska Team Project - 2012SkyGo Media Commander: SkyGo Media Commander permette di usare le frecce della tastiera per cambiare canale e il tasto invio per aprire il menu : "Telecomando". Utile se si usa un telecomando. Perfettamente funzionante con il telecomando CIR del notebook HP DV6 2137el.sunshine Design: sunshinetesting: testing projecttesttom032012git01: testtom032012git01testtom03222012hg01: testtom03222012hg01testtom03222012tfs01: testtom03222012tfs01testtom03222012tfs02: testtom03222012tfs02TileSet Map Editor: a small side project of a tileset map editorTraffic Light Simulation Application: Traffic Light Simulation application simulates traffic on a 2D plane under different traffic light control schemes. The interface will display a 10x10 grid where each street allows one-way traffic and there is one traffic light at each intersection.Type08ScreenCapture: Type08ScreenCapture brings Windows 8-like desktop capture function to Windows 7. If you type [Windows]+[PrintScreen], it capture a main display area and save the bitmap to your picture folder. It's developed in C#/WPF.WikiPlex – a Regex Wiki Engine: A regular expression based wiki engine allowing developers to integrate a wiki experience into an existing .NET applicationWindowsQR: Windows QR is a proof of concept about capturing a qr code using a webcam in a WPF application runinng in a desktop computer with Windows 7 or similars. It uses AForge.Vision to wrap the DirectShow complexity and zxing library to decode the qr code.Working with Social Data: 1)Customizing Tag Cloud By Accountname 2)RatingWPF 3D-Model Viewer: WPF 3D-Model Viewer

    Read the article

  • Building a SOA/BPM/BAM Cluster Part I &ndash; Preparing the Environment

    - by antony.reynolds
    An increasing number of customers are using SOA Suite in a cluster configuration, I might hazard to say that the majority of production deployments are now using SOA clusters.  So I thought it may be useful to detail the steps in building an 11g cluster and explain a little about why things are done the way they are. In this series of posts I will explain how to build a SOA/BPM cluster using the Enterprise Deployment Guide. This post will explain the setting required to prepare the cluster for installation and configuration. Software Required The following software is required for an 11.1.1.3 SOA/BPM install. Software Version Notes Oracle Database Certified databases are listed here SOA & BPM Suites require a working database installation. Repository Creation Utility (RCU) 11.1.1.3 If upgrading an 11.1.1.2 repository then a separate script is available. Web Tier Utilities 11.1.1.3 Provides Web Server, 11.1.1.3 is an upgrade to 11.1.1.2, so 11.1.1.2 must be installed first. Web Tier Utilities 11.1.1.3 Web Server, 11.1.1.3 Patch.  You can use the 11.1.1.2 version without problems. Oracle WebLogic Server 11gR1 10.3.3 This is the host platform for 11.1.1.3 SOA/BPM Suites. SOA Suite 11.1.1.2 SOA Suite 11.1.1.3 is an upgrade to 11.1.1.2, so 11.1.1.2 must be installed first. SOA Suite 11.1.1.3 SOA Suite 11.1.1.3 patch, requires 11.1.12 to have been installed. My installation was performed on Oracle Enterprise Linux 5.4 64-bit. Database I will not cover setting up the database in this series other than to identify the database requirements.  If setting up a SOA cluster then ideally we would also be using a RAC database.  I assume that this is running on separate machines to the SOA cluster.  Section 2.1, “Database”, of the EDG covers the database configuration in detail. Settings The database should have processes set to at least 400 if running SOA/BPM and BAM. alter system set processes=400 scope=spfile Run RCU The Repository Creation Utility creates the necessary database tables for the SOA Suite.  The RCU can be run from any machine that can access the target database.  In 11g the RCU creates a number of pre-defined users and schema with a user defiend prefix.  This allows you to have multiple 11g installations in the same database. After running the RCU you need to grant some additional privileges to the soainfra user.  The soainfra user should have privileges on the transaction tables. grant select on sys.dba_pending_transactions to prefix_soainfra Grant force any transaction to prefix_soainfra Machines The cluster will be built on the following machines. EDG Name is the name used for this machine in the EDG. Notes are a description of the purpose of the machine. EDG Name Notes LB External load balancer to distribute load across and failover between web servers. WEBHOST1 Hosts a web server. WEBHOST2 Hosts a web server. SOAHOST1 Hosts SOA components. SOAHOST2 Hosts SOA components. BAMHOST1 Hosts BAM components. BAMHOST2 Hosts BAM components. Note that it is possible to collapse the BAM servers so that they run on the same machines as the SOA servers. In this case BAMHOST1 and SOAHOST1 would be the same, as would BAMHOST2 and SOAHOST2. The cluster may include more than 2 servers and in this case we add SOAHOST3, SOAHOST4 etc as needed. My cluster has WEBHOST1, SOAHOST1 and BAMHOST1 all running on a single machine. Software Components The cluster will use the following software components. EDG Name is the name used for this machine in the EDG. Type is the type of component, generally a WebLogic component. Notes are a description of the purpose of the component. EDG Name Type Notes AdminServer Admin Server Domain Admin Server WLS_WSM1 Managed Server Web Services Manager Policy Manager Server WLS_WSM2 Managed Server Web Services Manager Policy Manager Server WLS_SOA1 Managed Server SOA/BPM Managed Server WLS_SOA2 Managed Server SOA/BPM Managed Server WLS_BAM1 Managed Server BAM Managed Server running Active Data Cache WLS_BAM2 Managed Server BAM Manager Server without Active Data Cache   Node Manager Will run on all hosts with WLS servers OHS1 Web Server Oracle HTTP Server OHS2 Web Server Oracle HTTP Server LB Load Balancer Load Balancer, not part of SOA Suite The above assumes a 2 node cluster. Network Configuration The SOA cluster requires an extensive amount of network configuration.  I would recommend assigning a private sub-net (internal IP addresses such as 10.x.x.x, 192.168.x.x or 172.168.x.x) to the cluster for use by addresses that only need to be accessible to the Load Balancer or other cluster members.  Section 2.2, "Network", of the EDG covers the network configuration in detail. EDG Name is the hostname used in the EDG. IP Name is the IP address name used in the EDG. Type is the type of IP address: Fixed is fixed to a single machine. Floating is assigned to one of several machines to allow for server migration. Virtual is assigned to a load balancer and used to distribute load across several machines. Host is the host where this IP address is active.  Note for floating IP addresses a range of hosts is given. Bound By identifies which software component will use this IP address. Scope shows where this IP address needs to be resolved. Cluster scope addresses only have to be resolvable by machines in the cluster, i.e. the machines listed in the previous section.  These addresses are only used for inter-cluster communication or for access by the load balancer. Internal scope addresses Notes are comments on why that type of IP is used. EDG Name IP Name Type Host Bound By Scope Notes ADMINVHN VIP1 Floating SOAHOST1-SOAHOSTn AdminServer Cluster Admin server, must be able to migrate between SOA server machines. SOAHOST1 IP1 Fixed SOAHOST1 NodeManager, WLS_WSM1 Cluster WSM Server 1 does not require server migration. SOAHOST2 IP2 Fixed SOAHOST1 NodeManager, WLS_WSM2 Cluster WSM Server 2 does not require server migration SOAHOST1VHN VIP2 Floating SOAHOST1-SOAHOSTn WLS_SOA1 Cluster SOA server 1, must be able to migrate between SOA server machines SOAHOST2VHN VIP3 Floating SOAHOST1-SOAHOSTn WLS_SOA2 Cluster SOA server 2, must be able to migrate between SOA server machines BAMHOST1 IP4 Fixed BAMHOST1 NodeManager Cluster   BAMHOST1VHN VIP4 Floating BAMHOST1-BAMHOSTn WLS_BAM1 Cluster BAM server 1, must be able to migrate between BAM server machines BAMHOST2 IP3 Fixed BAMHOST2 NodeManager, WLS_BAM2 Cluster BAM server 2 does not require server migration WEBHOST1 IP5 Fixed WEBHOST1 OHS1 Cluster   WEBHOST2 IP6 Fixed WEBHOST2 OHS2 Cluster   soa.mycompany.com VIP5 Virtual LB LB Public External access point to SOA cluster. admin.mycompany.com VIP6 Virtual LB LB Internal Internal access to WLS console and EM soainternal.mycompany.com VIP7 Virtual LB LB Internal Internal access point to SOA cluster Floating IP addresses are IP addresses that may be re-assigned between machines in the cluster.  For example in the event of failure of SOAHOST1 then WLS_SOA1 will need to be migrated to another server.  In this case VIP2 (SOAHOST1VHN) will need to be activated on the new target machine.  Once set up the node manager will manage registration and removal of the floating IP addresses with the exception of the AdminServer floating IP address. Note that if the BAMHOSTs and SOAHOSTs are the same machine then you can obviously share the hostname and fixed IP addresses, but you still need separate floating IP addresses for the different managed servers.  The hostnames don’t have to be the ones given in the EDG, but they must be distinct in the same way as the ETC names are distinct.  If the type is a fixed IP then if the addresses are the same you can use the same hostname, for example if you collapse the soahost1, bamhost1 and webhost1 onto a single machine then you could refer to them all as HOST1 and give them the same IP address, however SOAHOST1VHN can never be the same as BAMHOST1VHN because these are floating IP addresses. Notes on DNS IP addresses that are of scope “Cluster” just need to be in the hosts file (/etc/hosts on Linux, C:\Windows\System32\drivers\etc\hosts on Windows) of all the machines in the cluster and the load balancer.  IP addresses that are of scope “Internal” need to be available on the internal DNS servers, whilst IP addresses of scope “Public” need to be available on external and internal DNS servers. Shared File System At a minimum the cluster needs shared storage for the domain configuration, XA transaction logs and JMS file stores.  It is also possible to place the software itself on a shared server.  I strongly recommend that all machines have the same file structure for their SOA installation otherwise you will experience pain!  Section 2.3, "Shared Storage and Recommended Directory Structure", of the EDG covers the shared storage recommendations in detail. The following shorthand is used for locations: ORACLE_BASE is the root of the file system used for software and configuration files. MW_HOME is the location used by the installed SOA/BPM Suite installation.  This is also used by the web server installation.  In my installation it is set to <ORACLE_BASE>/SOA11gPS2. ORACLE_HOME is the location of the Oracle SOA components or the Oracle Web components.  This directory is installed under the the MW_HOME but the name is decided by the user at installation, default values are Oracle_SOA1 and Oracle_Web1.  In my installation they are set to <MW_HOME>/Oracle_SOA and <MW_HOME>/Oracle _WEB. ORACLE_COMMON_HOME is the location of the common components and is located under the MW_HOME directory.  This is always <MW_HOME>/oracle_common. ORACLE_INSTANCE is used by the Oracle HTTP Server and/or Oracle Web Cache.  It is recommended to create it under <ORACLE_BASE>/admin.  In my installation they are set to <ORACLE_BASE>/admin/Web1, <ORACLE_BASE>/admin/Web2 and <ORACLE_BASE>/admin/WC1. WL_HOME is the WebLogic server home and is always found at <MW_HOME>/wlserver_10.3. Key file locations are shown below. Directory Notes <ORACLE_BASE>/admin/domain_name/aserver/domain_name Shared location for domain.  Used to allow admin server to manually fail over between machines.  When creating domain_name provide the aserver directory as the location for the domain. In my install this is <ORACLE_BASE>/admin/aserver/soa_domain as I only have one domain on the box. <ORACLE_BASE>/admin/domain_name/aserver/applications Shared location for deployed applications.  Needs to be provided when creating the domain. In my install this is <ORACLE_BASE>/admin/aserver/applications as I only have one domain on the box. <ORACLE_BASE>/admin/domain_name/mserver/domain_name Either unique location for each machine or can be shared between machines to simplify task of packing and unpacking domain.  This acts as the managed server configuration location.  Keeping it separate from Admin server helps to avoid problems with the managed servers messing up the Admin Server. In my install this is <ORACLE_BASE>/admin/mserver/soa_domain as I only have one domain on the box. <ORACLE_BASE>/admin/domain_name/mserver/applications Either unique location for each machine or can be shared between machines.  Holds deployed applications. In my install this is <ORACLE_BASE>/admin/mserver/applications as I only have one domain on the box. <ORACLE_BASE>/admin/domain_name/soa_cluster_name Shared directory to hold the following   dd – deployment descriptors   jms – shared JMS file stores   fadapter – shared file adapter co-ordination files   tlogs – shared transaction log files In my install this is <ORACLE_BASE>/admin/soa_cluster. <ORACLE_BASE>/admin/instance_name Local folder for web server (OHS) instance. In my install this is <ORACLE_BASE>/admin/web1 and <ORACLE_BASE>/admin/web2. I also have <ORACLE_BASE>/admin/wc1 for the Web Cache I use as a load balancer. <ORACLE_BASE>/product/fmw This can be a shared or local folder for the SOA/BPM Suite software.  I used a shared location so I only ran the installer once. In my install this is <ORACLE_BASE>/SOA11gPS2 All the shared files need to be put onto a shared storage media.  I am using NFS, but recommendation for production would be a SAN, with mirrored disks for resilience. Collapsing Environments To reduce the hardware requirements it is possible to collapse the BAMHOST, SOAHOST and WEBHOST machines onto a single physical machine.  This will require more memory but memory is a lot cheaper than additional machines.  For environments that require higher security then stay with a separate WEBHOST tier as per the EDG.  Similarly for high volume environments then keep a separate set of machines for BAM and/or Web tier as per the EDG. Notes on Dev Environments In a dev environment it is acceptable to use a a single node (non-RAC) database, but be aware that the config of the data sources is different (no need to use multi-data source in WLS).  Typically in a dev environment we will collapse the BAMHOST, SOAHOST and WEBHOST onto a single machine and use a software load balancer.  To test a cluster properly we will need at least 2 machines. For my test environment I used Oracle Web Cache as a load balancer.  I ran it on one of the SOA Suite machines and it load balanced across the Web Servers on both machines.  This was easy for me to set up and I could administer it from a web based console.

    Read the article

  • CodePlex Daily Summary for Monday, April 02, 2012

    CodePlex Daily Summary for Monday, April 02, 2012Popular ReleasesDocument.Editor: 2012.2: Whats New for Document.Editor 2012.2: New Save Copy support New Page Setup support Minor Bug Fix's, improvements and speed upsVidCoder: 1.3.2: Added option for the minimum title length to scan. Added support to enable or disable LibDVDNav. Added option to prompt to delete source files after clearing successful completed items. Added option to disable remembering recent files and folders. Tweaked number box to only select all on a quick click.MJP's DirectX 11 Samples: Light Indexed Deferred Rendering: Implements light indexed deferred using per-tile light lists calculated in a compute shader, as well as a traditional deferred renderer that uses a compute shader for per-tile light culling and per-pixel shading.Pcap.Net: Pcap.Net 0.9.0 (66492): Pcap.Net - March 2012 Release Pcap.Net is a .NET wrapper for WinPcap written in C++/CLI and C#. It Features almost all WinPcap features and includes a packet interpretation framework. Version 0.9.0 (Change Set 66492)March 31, 2012 release of the Pcap.Net framework. Follow Pcap.Net on Google+Follow Pcap.Net on Google+ Files Pcap.Net.DevelopersPack.0.9.0.66492.zip - Includes all the tutorial example projects source files, the binaries in a 3rdParty directory and the documentation. It include...Extended WPF Toolkit: Extended WPF Toolkit - 1.6.0: Want an easier way to install the Extended WPF Toolkit?The Extended WPF Toolkit is available on Nuget. What's in the 1.6.0 Release?BusyIndicator ButtonSpinner Calculator CalculatorUpDown CheckListBox - Breaking Changes CheckComboBox - New Control ChildWindow CollectionEditor CollectionEditorDialog ColorCanvas ColorPicker DateTimePicker DateTimeUpDown DecimalUpDown DoubleUpDown DropDownButton IntegerUpDown Magnifier MaskedTextBox MessageBox MultiLineTex...ScriptIDE: Release 4.4: ...Media Companion: MC 3.434b Release: General This release should be the last beta for 3.4xx. If there are no major problems, by the end of the week it will upgraded to 3.500 Stable! The latest mc_com.exe should be included too! TV Bug fix - crash when using XBMC scraper for TV episodes. Bug fix - episode count update when adding new episodes. Bug fix - crash when actors name was missing. Enhanced TV scrape progress text. Enhancements made to missing episodes display. Movies Bug fix - hide "Play Trailer" when multisaev...Better Explorer: Better Explorer 2.0.0.831 Alpha: - A new release with: - many bugfixes - changed icon - added code for more failsafe registry usage on x64 systems - not needed regfix anymore - added ribbon shortcut keys - Other fixes Note: If you have problems opening system libraries, a suggestion was given to copy all of these libraries and then delete the originals. Thanks to Gaugamela for that! (see discussion here: 349015 ) Note2: I was upload again the setup due to missing file!MonoGame - Write Once, Play Everywhere: MonoGame 2.5: The MonoGame team are pleased to announce that MonoGame v2.5 has been released. This release contains important bug fixes, implements optimisations and adds key features. MonoGame now has the capability to use OpenGLES 2.0 on Android and iOS devices, meaning it now supports custom shaders across mobile and desktop platforms. Also included in this release are native orientation animations on iOS devices and better Orientation support for Android. There have also been a lot of bug fixes since t...Circuit Diagram: Circuit Diagram 2.0 Alpha 3: New in this release: Added components: Microcontroller Demultiplexer Flip & rotate components Open XML files from older versions of Circuit Diagram Text formatting for components New CDDX syntax Other fixesUmbraco CMS: Umbraco 5.1 CMS (Beta): Beta build for testing - please report issues at issues.umbraco.org (Latest uploaded: 5.1.0.123) What's new in 5.1? The full list of changes is on our http://progress.umbraco.org task tracking page. It shows items complete for 5.1, and 5.1 includes items for 5.0.1 and 5.0.2 listed there too. Here's two headline acts: Members5.1 adds support for backoffice editing of Members. We support the pairing up of our content type system in Hive with regular ASP.NET Membership providers (we ship a def...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.2.11: One Click Install from NuGet Changes to Version 2.1.2.11Code Changes 1. The project is now licenced under the Mozilla Public Licence 2. 2. User interface control and associated data access layer classes have been added to aid developers integrating 51Degrees.mobi into wider projects such as content management systems or web hosting management solutions. Use the following in a web form or user control to access these new UI components. <%@ Register Assembly="FiftyOne.Foundation" Namespace="...JSON Toolkit: JSON Toolkit 3.1: slight performance improvement (5% - 10%) new JsonException classPicturethrill: Version 2.3.28.0: Straightforward image selection. New clean UI look. Super stable. Simplified user experience.SQL Monitor - managing sql server performance: SQL Monitor 4.2 alpha 16: 1. finally fixed problem with logic fault checking for temporary table name... I really mean finally ...ScintillaNET: ScintillaNET 2.5: A slew of bug-fixes with a few new features sprinkled in. This release also upgrades the SciLexer and SciLexer64 DLLs to version 3.0.4. The official stuff: Issue # Title 32402 32402 27137 27137 31548 31548 30179 30179 24932 24932 29701 29701 31238 31238 26875 26875 30052 30052 Vodigi Open Source Interactive Digital Signage: Vodigi Release 5.0: Vodigi Release 5.0 The .ZIP file for this release contains everything you need to setup and install Vodigi 5.0. Setup and intallation documentation is included in the .ZIP file. Vodigi Release 5.0 consists of the following core components: Vodigi Administrator Web Site Vodigi Player Windows Application Vodigi Media Uploader Windows Application Vodigi Databases Refer to the documentation included in the .ZIP file to setup and configure your servers and player devices for this release.Harness: Harness 2.0.2: change to .NET Framework Client Profile bug fix the download dialog auto answer. bug fix setFocus command. add "SendKeys" command. remove "closeAll" command. minor bugs fixed.BugNET Issue Tracker: BugNET 0.9.161: Below is a list of fixes in this release. Bug BGN-2092 - Link in Email "visit your profile" not functional BGN-2083 - Manager of bugnet can not edit project when it is not public BGN-2080 - clicking on a link in the project summary causes error (0.9.152.0) BGN-2070 - Missing Functionality On Feed.aspx BGN-2069 - Calendar View does not work BGN-2068 - Time tracking totals not ok BGN-2067 - Issues List Page Size Bug: Index was out of range. Must be non-negative and less than the si...YAF.NET (aka Yet Another Forum.NET): v1.9.6.1 RTW: v1.9.6.1 FINAL is .NET v4.0 ONLY v1.9.6.1 has: Performance Improvements .NET v4.0 improvements Improved FaceBook Integration KNOWN ISSUES WITH THIS RELEASE: ON INSTALL PLEASE DON'T CHECK "Upgrade BBCode Extensions...". More complete change list and discussion here: http://forum.yetanotherforum.net/yaf_postst14201_v1-9-6-1-RTW-Dated--3-26-2012.aspxNew ProjectsAdvanced JavaScript outlining for Visual Studio 11: This is extension for Visual Studio 11 that adds additional outlining for JavaScript Editorakrypt2: qt-based GUI for libaxel http://axelkenzo.ru/index.php?section=libaxel.downloadaluminium: aluminium calculationAuditDbContext - Entity Framework Auditing Context: AuditDbContext provides entity change auditing for Entity Framework POCO entities.AutoBox: Creates a fresh .Net developer environment from a bare OS utilizing powershell, chocolatey and webpi.Bookregator: Bookregator is a C# application written to aggregate data using Amazon's Advertising API, WorldCat, and GoodReads.Bootstrap.ConfirmModal: There is a situation that we need user to confirm before they proceed their action. You don’t want to accidently delete very important information. So I come up the idea to extend the bootstrap modal popup to create a confirm modal before calling the function to delete some stuffColour Lovers .NET: A .NET library for the Colour Lovers API.Cursos y Causas: Cursos y Causas desarrollado en asp.net MVCDataModels: DataModels is a project which aims to allow for easy reuse of specific data models using a very simple API. easy framework is used to fast work: codingEGM Engine: The engine for the Express Game Maker editor.E-Junkey: Project personalExpress Game Maker: You can use Express Game Maker to makes games without the need to write a single line of code! EGM's source is shared and is constantly improved by developers around the world. Learn Express Game Maker in no time with tutorials, videos and templates. Share what you learn with the community and ask the community for help. Express Game Maker is free, if you paid for it anywhere, we suggest you ask for a refund.Extending Razor Engine: Extending Razor Engine. Nice and clean solution for CMS system, such as Kentico, red dot, etc.FloodWarn: A series of server and client apps for monitoring flood levels on the Snoqualmie River in King County, Washington.GetThatList: With GetThatList people will find an easy way to copy a music playlist and its songs to another location, being another folder or a remote computer. It is designed so that it can be exposed to the final user as an standalone application or a Shell extension for playlist files.HashMapper - Object-Hash Mapper for Redis: Object-Hash Mapper for Redis and BookSleeve.hostedit: small utility to quickly change the host file. toggles a single clickI-Control: SecretIIS Hosts File Manager: Here's an IIS 7.5 and 8.0 module to add host headers to the Hosts file without having to edit it with notepad. Very useful if you create a lot of web sites for testing or demo purposes. Interval Trainer: Inspired by new research* on interval training this application will help you easily transition into interval based workouts. Current Features Two interval cycles that can be individually customized in time length Preloaded ideal workout for aerobic exercise based on suggested research* (high intensity sprints during workout interval, light jogs during rest) Coming Soon Custom interval workouts with as many intervals in a cycle as necessary Persistent workout settings *Links to t...MicroRuntime: The MicroRuntime project is a .NET utility library.MS Office Word Navigation: Navigate forward/backward inside a Word document MvcFlow: Integration between Workflow Foundation 4.5 and ASP.NET MVC 4NewLineReplacer: Replace letter fast and easy in great textfilesObject-Oriented CAML: Using CAML objectsOpenCover: A code coverage tool for .NET 2 and above, support for 32 and 64 processes (including Silverlight) with both branch and sequence points; now supporting coverage by test feature. This is a mirror of the original github repository to allow codeplex users to contribute. The latest downloads can be found here https://github.com/sawilde/opencover/downloads and is also available using nuget. Pavings.NET: Library for applied interval analysis including intervals, boxes and sub-pavings. Interval analysis is a method of approximating sets with any degree of precision and it has applications from optimization to robotics. Inspired by book "Applied Interval Analysis" by Luc Jaulin et al.proyectoIntegrador3: Proyecto Integrador 3QPAPrintLib: Print every document by its recommended programmsChord: Typing text on the consoles doesn’t have to mean another trauma. Having to navigate to each letter with arrows and analog sticks is really inefficient & lame. In fact you can easily encode each character as a combination of positions of two analog sticksServer DateTime: Server DateTime renders the date and time from the server and make it active using javascript. It is in Military Time Format.SjclHelpers: Helpers for using the Stanford Javascript Crypto Library with .NET.SSAS AMO DB: SSAS AMO DB is a database version of AMO which helps to view the metadata stored in the SSAS cube. The Metadata will be loaded from the SSAS cube using AMO into a SQL Server database using SSIS package. From that database user can generate reports for the SSAS metadata. This database stores the below SSAS objects and their properties Server Databases DataSource DataSourceView DataSourceViewTablecolumns Cube CubeDimension DimensionAttribute AttributeKeyColumns AttributeKeyColum...Stump: A really small BDD framework built on top of nunitSvnbox.org svn sync project (dropbox like): Sync your folder on svn repository work as a teamTextShadowWrapper: TextShadowWrapper is a custom server control for ASP.NET web pages. It inherits from System.Web.UI.WebControls.Label and supports CSS3 text shadows.tjnetSite: Web Site for the Tijuana .Net User groupTönnenKlapps: XNA game where you try to smash a 3D spinning barrel using the correct coloured buttons and the right timing.WP7 Selected Pivot: an example showing how to navigate from one page to desired pivot on another pageXAML Metro Application Isolated Storage Helper: XAMLMetroAppIsolatedStorageHelper helps to Save, Retrieve and Delete structured data in the Isolated Storage. This helper class helps in XAML based Metro application. xsockets: XSockets Test

    Read the article

  • CodePlex Daily Summary for Thursday, March 29, 2012

    CodePlex Daily Summary for Thursday, March 29, 2012Popular ReleasesWouter's SharePoint Demo Land: Custom Views and Forms: Samples showing how to provision custom lists. Custom view rendering with code, XSLT, XSLT + code. Custom forms with database lookups.YouTube API Class & Server Control for ASP.NET 4.0: Binary dll Files with Demo: . You can find binary dll files under :- Demo\bin\ folder Demo url :- http://demo.svinn.com/YouTube/Default.aspx 1 GB Hosting + Free Domain => http://ghosting.in/ .callisto: callisto 2.0.23: Patched Script static class and peak user count bug fix.Circuit Diagram: Circuit Diagram 2.0 Alpha 3: New in this release: Added components: Microcontroller Demultiplexer Flip & rotate components Open XML files from older versions of Circuit Diagram Text formatting for components New CDDX syntax Other fixesUmbraco CMS: Umbraco 5.1 CMS (Beta): Beta build for testing - please report issues at issues.umbraco.org (Latest uploaded: 5.1.0.123) What's new in 5.1? The full list of changes is on our http://progress.umbraco.org task tracking page. It shows items complete for 5.1, and 5.1 includes items for 5.0.1 and 5.0.2 listed there too. Here's two headline acts: Members5.1 adds support for backoffice editing of Members. We support the pairing up of our content type system in Hive with regular ASP.NET Membership providers (we ship a def...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.2.11: One Click Install from NuGet Changes to Version 2.1.2.11Code Changes 1. The project is now licenced under the Mozilla Public Licence 2. 2. User interface control and associated data access layer classes have been added to aid developers integrating 51Degrees.mobi into wider projects such as content management systems or web hosting management solutions. Use the following in a web form or user control to access these new UI components. <%@ Register Assembly="FiftyOne.Foundation" Namespace="...JSON Toolkit: JSON Toolkit 3.1: slight performance improvement (5% - 10%) new JsonException classPicturethrill: Version 2.3.28.0: Straightforward image selection. New clean UI look. Super stable. Simplified user experience.Indent Guides for Visual Studio: Indent Guides v12 (beta 2): Note This beta is likely to be less stable than the previous one. If you have severe troubles using this version, please report them with as much detail as possible (especially other extensions/addins that you may have) and downgrade to the last stable release. Version History Changed since v12 (beta 1): new options dialog with Quick Set selections for behavior restructured settings storage (should be more reliable) asynchronous background document analysis glow effect now appears in p...SQL Monitor - managing sql server performance: SQL Monitor 4.2 alpha 16: 1. finally fixed problem with logic fault checking for temporary table name... I really mean finally ...ScintillaNET: ScintillaNET 2.5: A slew of bug-fixes with a few new features sprinkled in. This release also upgrades the SciLexer and SciLexer64 DLLs to version 3.0.4. The official stuff: Issue # Title 32402 32402 27137 27137 31548 31548 30179 30179 24932 24932 29701 29701 31238 31238 26875 26875 30052 30052 Mugen MVVM Toolkit: Mugen MVVM Toolkit ver 1.1: Added Design mode support.Multiwfn: Multiwfn 2.3.2: Multiwfn 2.3.2Harness: Harness 2.0.2: change to .NET Framework Client Profile bug fix the download dialog auto answer. bug fix setFocus command. add "SendKeys" command. remove "closeAll" command. minor bugs fixed.BugNET Issue Tracker: BugNET 0.9.161: Below is a list of fixes in this release. Bug BGN-2092 - Link in Email "visit your profile" not functional BGN-2083 - Manager of bugnet can not edit project when it is not public BGN-2080 - clicking on a link in the project summary causes error (0.9.152.0) BGN-2070 - Missing Functionality On Feed.aspx BGN-2069 - Calendar View does not work BGN-2068 - Time tracking totals not ok BGN-2067 - Issues List Page Size Bug: Index was out of range. Must be non-negative and less than the si...YAF.NET (aka Yet Another Forum.NET): v1.9.6.1 RTW: v1.9.6.1 FINAL is .NET v4.0 ONLY v1.9.6.1 has: Performance Improvements .NET v4.0 improvements Improved FaceBook Integration KNOWN ISSUES WITH THIS RELEASE: ON INSTALL PLEASE DON'T CHECK "Upgrade BBCode Extensions...". More complete change list and discussion here: http://forum.yetanotherforum.net/yaf_postst14201_v1-9-6-1-RTW-Dated--3-26-2012.aspxmenu4web: menu4web 0.0.3: menu4web 0.0.3ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.0 Final: This release installs both the ArcGIS Editor for OSM Server Component and/or ArcGIS Editor for OSM Desktop components. The Desktop tools allow you to download data from the OpenStreetMap servers and store it locally in a geodatabase. You can then use the familiar editing environment of ArcGIS Desktop to create, modify, or delete data. Once you are done editing, you can post back the edit changes to OSM to make them available to all OSM users. The Server Component allows you to quickly create...Craig's Utility Library: Craig's Utility Library 3.1: This update adds about 60 new extension methods, a couple of new classes, and a number of fixes including: Additions Added DateSpan class Added GenericDelimited class Random additions Added static thread friendly version of Random.Next called ThreadSafeNext. AOP Manager additions Added Destroy function to AOPManager (clears out all data so system can be recreated. Really only useful for testing...) ORM additions Added PagedCommand and PageCount functions to ObjectBaseClass (same as M...DotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...New ProjectsAeroFichierAchats: Program that reworks excel files into PDFArepa: A lightweight non-invasive tool that helps you to implement Behavior Driven Development (BDD) on .NET projects. Arepa produces guidelines of using BDD on your current tests, and customisable and portable test reports integrating XML Documentation Comments. It's developed in C# using Scrum and BDD.Azure User Management Console - AUMC: Azure User Management Console - AUMC is a User Graphic Interface (GUI) that manages the users and logins of an Azure SQL database. The tool is simply converting your action into T-SQL commands and execute them on the Azure SQL Database. BaseProject: BaseProjectCraftBukkit Updater: I don't activly monitor the status of CraftBukkit's updates, but I want to stay on top of the updated versions. This will track the last version in cache then check for updates. Upon update there should be an option to download automaticly to location XYZ or to send an email/sms.Dan Dot Com: Dan's SandboxEjemplos Windows 8 Javascript: Este proyecto pretende recoger todos los ejemplos de aplicaciones metro para Windows 8 en JavaScript que vaya desarrollando para fines didácticos. Todas las colaboraciones son bienvenidas.EntityFramework Generic Patterns: EntityFramework Generic PatternsEpFamvir: EpFamvir is a Visual C++ software framework that supports data-intensive distributed applications under a GPL3.0 license. It enables applications to work with thousands of nodes and petabytes of data. Famvir was inspired by Apache Hadoop, Google's MapReduce, and Google FS.etdc/etp: ???????????????? ???????? ??????? etest.ru. IndieCiv: IndieCiv - An independent look at how a new game could be made using fan-made graphics from Civ3. You can visit the discussion at www.civfanatics.com http://forums.civfanatics.com/showthread.php?t=421582Libro SQL Server 2012: Databases and examples for my Italian book on "SQL Server 2012"Linq2Rest: Parses OData system query parameters to create a LINQ query that can be used to filter a model set. Also exposes a LINQ provider for web services supporting the OData query parameters. Use extension method Filter (in Linq2Rest namespace) on any IEnumerable source.LittleUmph: It's a little library to help you to alleviate some of the mundane stuff during your development. It has some nifty stuff like a neat database wrapper, conversion utilities, string functions and vast of other mini helpers to improve the efficiency and consistency of your code.LonghornRPG: LonghornRPGMemberManager: Keep track of membersMSU Student Teaching DataBase: A C# application to manage student placements for MSU.MvcContrib4: This is the MvcContrib project to support MVC 4MYFIRSTDEMOPROJECT: Introduction to CSharpOrchard Page Title Override: This Orchard CMS module allows a user to manage the Page Title. You can now have the Site Name show up last in the Page Title or hide the Site Name completely from the Page Title. The module also contains a Content Part allowing a Page Title to be separate from content title.phoenixtree: .net linux sql php python html javascript c exampleProject Explorer for Notepad++: This project mainly aims at providing a functional rich project explorer experience on notepad++. Features include Folder based file browsing, searching, filtering and more.Projeto Exemplo FPU: Projeto Exemplo FPUPureCalendar: simple web calendarrails study: rails studySafe IM: a safe IM software use AES,SHA,RSA.Contain a server and a clientScoreboard: Scoreboard is a simple sports and/or activities scoreboard which can be used for a variety of purposes It was developed for use with a 1024x768 projector and features home and away scores, countdown clock, even a buzzer. It's developed in VB.net.SharePoint System dates and editor fields updater: The SPChangeDate is a utility used to modify some of the system fields in a SharePoint 2010 document library using a datagridview (Excel Like). It allows the modification of the following SharePoint fields: 1. Created 2. Modified 3. Modified By 4. Created By Shi Ji Xiang CRM 2012: Shi Ji XiangSIGECAR: SIGECARStable Dependencies Principle Checker for nDepend: Small console app for parsing nDepend output files and find assemblies that breaks the Stable Dependencies PrincipleStudentsPointManager: StudentsPointManagertclh123test: 4testThai Sign Language Translator: Thai Sign Language Translator with Kinect Sensor.The House FM / My Praise FM Desktop App: An App to play Christian radio on the desktop of windows Vista and Windows 7 computersTradeSea: Uni ProjectVisual Dependency Tracer: This tool will help you understand how an excel formula is derived/calculated. It provides a visual representation (tree) of the formula, including the precendents and dependents.VK Video Player: Video player for russian social network vk.comXrmSvcToolkit: XrmSvcToolkit is a small JavaScript library that helps you access Microsoft Dynamics CRM 2011 web service interfaces (SOAP and REST).

    Read the article

  • CodePlex Daily Summary for Saturday, March 05, 2011

    CodePlex Daily Summary for Saturday, March 05, 2011Popular ReleasesXsltDb - DotNetNuke Module Builder: 02.00.66: Using XsltDb As User Controladding XsltDb configurations to skin, to your controls, ... Page level output cachingAlso takes into account current user current language see mdo:setup-putput-cache. Performance optimizations......for large configurations or large outputAutoLoL: AutoLoL v1.6.4: It is now possible to run the clicker anyway when it can't detect the Masteries Window Fixed a critical bug in the open file dialog Removed the resize button Some UI changes 3D camera movement is now more intuitive (Trackball rotation) When an error occurs on the clicker it will attempt to focus AutoLoLYAF.NET (aka Yet Another Forum.NET): v1.9.5.5 RTW: YAF v1.9.5.5 RTM (Date: 3/4/2011 Rev: 4742) Official Discussion Thread here: http://forum.yetanotherforum.net/yaf_postsm47149_v1-9-5-5-RTW--Date-3-4-2011-Rev-4742.aspx Changes in v1.9.5.5 Rev. #4661 - Added "Copy" function to forum administration -- Now instead of having to manually re-enter all the access masks, etc, you can just duplicate an existing forum and modify after the fact. Rev. #4642 - New Setting to Enable/Disable Last Unread posts links Rev. #4641 - Added Arabic Language t...youtubeFisher: YouTubeFisher v3.0 Beta: Adding support for more video formats including the Super HD (e.g. http://www.youtube.com/watch?v=MrrHs2bnHPA) Minor change related to the video title due to change in YouTube pageSnippet Designer: Snippet Designer 1.3.1: Snippet Designer 1.3.1 for Visual Studio 2010This is a bug fix release. Change logFixed bug where Snippet Designer would fail if you had the most recent Productivity Power Tools installed Fixed bug where "Export as Snippet" was failing in non-english locales Fixed bug where opening a new .snippet file would fail in non-english localesChiave File Encryption: Chiave 1.0: Final Relase for Chave 1.0 Stable: Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Now with added support to Windows XP! Change Log from 0.9.2 to 1.0: ==================== Added: > Added Icon Overlay for Windows 7 Taskbar Icon. >Added Thumbnail Toolbar buttons to make the navigation easier...ASP.NET: Sprite and Image Optimization Preview 3: The ASP.NET Sprite and Image Optimization framework is designed to decrease the amount of time required to request and display a page from a web server by performing a variety of optimizations on the page’s images. This is the third preview of the feature and works with ASP.NET Web Forms 4, ASP.NET MVC 3, and ASP.NET Web Pages (Razor) projects. The binaries are also available via NuGet: AspNetSprites-Core AspNetSprites-WebFormsControl AspNetSprites-MvcAndRazorHelper It includes the foll...Document.Editor: 2011.9: Whats new for Document.Editor 2011.9: New Templates System New Plug-in System New Replace dialog New reset settings Minor Bug Fix's, improvements and speed upsTortoiseHg: TortoiseHg 2.0: TortoiseHg 2.0 is a complete rewrite of TortoiseHg 1.1, switching from PyGtk to PyQtSandcastle Help File Builder: SHFB v1.9.2.0 Release: This release supports the Sandcastle June 2010 Release (v2.6.10621.1). It includes full support for generating, installing, and removing MS Help Viewer files. This new release is compiled under .NET 4.0, supports Visual Studio 2010 solutions and projects as documentation sources, and adds support for projects targeting the Silverlight Framework. NOTE: The included help file and the online help have not been completely updated to reflect all changes in this release. A refresh will be issue...Network Monitor Open Source Parsers: Microsoft Network Monitor Parsers 3.4.2554: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, we have added 4 new protocol parsers and updated 79 existing parsers in the NetworkMonitor_Pa...Image Resizer for Windows: Image Resizer 3 Preview 1: Prepare to have your minds blown. This is the first preview of what will eventually become 39613. There are still a lot of rough edges and plenty of areas still under construction, but for your basic needs, it should be relativly stable. Note: You will need the .NET Framework 4 installed to use this version. Below is a status report of where this release is in terms of the overall goal for version 3. If you're feeling a bit technically ambitious and want to check out some of the features th...JSON Toolkit: JSON Toolkit 1.1: updated GetAllJsonObjects() method and GetAllProperties() methods to JsonObject and Properties propertiesFacebook Graph Toolkit: Facebook Graph Toolkit 1.0: Refer to http://computerbeacon.net for Documentation and Tutorial New features:added FQL support added Expires property to Api object added support for publishing to a user's friend / Facebook Page added support for posting and removing comments on posts added support for adding and removing likes on posts and comments added static methods for Page class added support for Iframe Application Tab of Facebook Page added support for obtaining the user's country, locale and age in If...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.1: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager small improvements for some helpers and AjaxDropdown has Data like the Lookup except it's value gets reset and list refilled if any element from data gets changedManaged Extensibility Framework: MEF 2 Preview 3: This release aims .net 4.0 and Silverlight 4.0. Accordingly, there are two solutions files. The assemblies are named System.ComponentModel.Composition.Codeplex.dll as a way to avoid clashing with the version shipped with the 4th version of the framework. Introduced CompositionOptions to container instantiation CompositionOptions.DisableSilentRejection makes MEF throw an exception on composition errors. Useful for diagnostics Support for open generics Support for attribute-less registr...PHPExcel: PHPExcel 1.7.6 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.4: Version: 2.0.0.4 (Milestone 4): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...VidCoder: 0.8.2: Updated auto-naming to handle seconds and frames ranges as well. Deprecated the {chapters} token for auto-naming in favor of {range}. Allowing file drag to preview window and enabling main window shortcut keys to work no matter what window is focused. Added option in config to enable giving custom names to audio tracks. (Note that these names will only show up certain players like iTunes or on the iPod. Players that support custom track names normally may not show them.) Added tooltips ...SQL Server Compact Toolbox: Standalone version 2.0 for SQL Server Compact 4.0: Download the Visual Studio add-in for SQL Server Compact 4.0 and 3.5 from here Standalone version of (most of) the same functionality as the add-in, for SQL Server Compact 4.0. Useful for anyone not having Visual Studio Professional or higher installed. Requires .NET 4.0. Any feedback much appreciated.New Projects.Deploy - Enterprise .NET Application Deployment Solution: .Deploy is a .NET based enterprise application deployment solution focused around .NET applications. .Deploy automates the repetitive task of pushing/deploying applications in a controlled, auditable, and verifiable way.AAEngine: A 2D game engine for XNA.ANKASTS: ankastsAutomator: Automator is a GUI tool that is intended to manage and run hierarchical structure of actions (Tasks). Something similar to NAnt but targeted for a far wider audience. Automator is developed in C# and WPF.BANews: ???????????????????,??SQL+Server2008,C#,asp.net????,??????Jquery?CSS+DIV??。??????,?????????????,????????,??????,??。Cloud BookShelf: Cloud BookShelf ?OData Client for Objective-C(http://odataobjc.codeplex.com/)????、Azure??????????????iOS??????????。CodingBlog: codingblogDNN Module Samples: There are some sample DNN modules in this projectEITEST: It is the Test Projecteuler 11: euler 11euler 52 problem: euler 52 problemfastspweb - Access SPWeb through cache: This an engine for caching SPSite and SPWeb objects on SharePoint. Because SharePoint dont alllow multithreaded access to these objects, the access is done through a threadpoolGSP420 2011 Spring Course Project: Course project game engine for DeVry Spring 2011 GSP420 class.IE Library for Small Basic: This library extend Small Basic to allows you to access web site using by Internet Explorer from Small Basic program. ???????? Small Basic ????、Small Basic ??? Internet Explorer ???? Web ???????????????????。InfoStrat Motion Framework: InfoStrat Motion Framework enables you to easily use motion tracking in your WPF applications with depth sensors such as Kinect and PrimeSensor.JSC.Mobile: Mobile(IPhone) WebApp with offline capabilities to administrate your car milagesMSSQL Db Generation From and To .NET Assemblies(Dlls): MSSQL DbGenerator works with an existing MSSQL Db and codes all structers of it into a .NET Assembly(DbAssembly) --of course with the exception of data within. More than that it has the ability to read any previously created DbAssembly and generates MSSQL db from scratchMVP Summit Events WP7: An application to learn of the best gatherings and events at the Microsoft MVP Summit in 2011. We are open sourcing the application to give some knowledge around how to develop a Windows Phone 7 application consuming OData with the MVVM pattern.NAntMenu: NAntMenu Shell Extension is a Windows Shell Extension allowing you to run NAnt build scripts directly from within Windows Explorer.NGem: another attempt to create package management in .net/c++ environmentNOrder: A basic sorting algorithm library developed in C#, providing users the flexibility to choose how to sort data.Orchard CulturePicker Module: Module for Orchard, that allows users to pick a preferred culture, instead of using a default site culture.Orchard Html Field Module: Html Field for the Orchard ProjectP9876: p9876 is not p1234SharePoint 2010 File Migrating tool (console program): Copy files and sub folders from file system to SharePoint 2010 document librarySilverlightTube: Silverlight Media End Work Project to recreate a You Tube looking websiteSITEYONETIM: Site ve Apartman YönetimiSITEYONETIMWEB: siteyonetimwebSteel: Steel is a puzzle game for Windows Phone 7 made with the XNA framework.WikiVB: A Wikipedia API wrapper library written in VB.NET. Can be used with languages like C#, F# and other .NET programming languages.

    Read the article

  • CodePlex Daily Summary for Wednesday, March 07, 2012

    CodePlex Daily Summary for Wednesday, March 07, 2012Popular ReleasesStackBuilder: StackBuilder 1.0.5.0: + Added Collada/WebGL export to show 3D animation of pallet solutions...Delta Engine: Delta Engine Beta Preview v0.9.4: v0.9.4 is the release for February 2012, but it was delayed till 2012-03-07 until content generation worked much better for v0.9.4. The main improvements were done on the server side (content generation and improved build support for iOS and Android). v0.9.4 is also the first version everyone can use to deploy their application onto all supported platforms, see Marketplace Licensing for details: http://deltaengine.net/Marketplace Documentation for this version can be found at: http://help.de...PDFsharp - A .NET library for processing PDF: PDFsharp and MigraDoc Foundation 1.32: PDFsharp and MigraDoc Foundation 1.32 is a stable version that fixes a few bugs that were found with version 1.31. Version 1.32 includes solutions for Visual Studio 2010 only (but it should be possible to add the project files to existing solutions for VS 2005 or VS 2008). Users of VS 2005 or VS 2008 can still download version 1.31 with the solutions for those versions that allow them to easily try the samples that are included. While it may create smaller PDF files than version 1.30 because...Terminals: Version 2.0 - Release: Changes since version 1.9a:New art works New usability in Organize favorites window Improved usability of imports/exports and scans Large number of fixes Improvements in single instance mode Comparing November beta 4, this corrects: New application icons Doesn't show Logon error codes Fixed command line arguments exception for single instance mode Fixed detaching of tabs improved usability in detached window Fixed option settings for Capture manager Fixed system tray noti...MFCMAPI: March 2012 Release: Build: 15.0.0.1032 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeSimple Injector: Simple Injector v1.4.1: This release adds two small improvements to the SimpleInjector.Extensions.dll. No changes have been made to the core library. New features and improvements in this release for the SimpleInjector.Extensions.dll The RegisterManyForOpenGeneric extension methods now accept non-generic decorator, as long as they implement the given open generic service type. GetTypesToRegister methods added to the OpenGenericBatchRegistrationExtensions class which allows to customize the behavior. Note that the...CommonLibrary: Code: CodePowerGUI Visual Studio Extension: PowerGUI VSX 1.5.2: Added support for PowerGUI 3.2.VidCoder: 1.3.1: Updated HandBrake core to 0.9.6 release (svn 4472). Removed erroneous "None" container choice. Change some logic and help text to stop assuming you have to pick the VIDEO_TS folder for a DVD scan. This should make previewing DVD titles on the Queue Multiple Titles window possible when you've picked the root DVD directory.ExtAspNet: ExtAspNet v3.1.0: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ??????????。 ExtAspNet ??????? JavaScript,?? CSS,?? UpdatePanel,?? ViewState,?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????:Apache License 2.0 (Apache) ??:http://extasp.net/ ??:http://bbs.extasp.net/ ??:http://extaspnet.codeplex.com/ ??:http://sanshi.cnblogs.com/ ????: +2012-03-04 v3.1.0 -??Hidden???????(〓?〓)。 -?PageManager??...AcDown????? - Anime&Comic Downloader: AcDown????? v3.9.1: ?? ●AcDown??????????、??、??????,????1M,????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。??????AcPlay?????,??????、????????????????。 ● AcDown???????????????????????????,???,???????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ????????????? ??:????????Windows XP???,?????????.NET Framework 2.0???(x86),?????"?????????"??? ??????????????,??????????: ??"AcDo...Windows Phone Commands for VS2010: Version 1.0: Initial Release Version 1.0 Connect from device or emulator (Monitors the connection) Show Device information (Plataform, build , version, avaliable memory, total memory, architeture Manager installed applications (Launch, uninstall and explorer isolate storage files) Manager core applications (Launch blocked applications from emulator (Office, Calculator, alarm, calendar , etc) Manager blocked settings from emulator (Airplane Mode, Celullar Network, Wifi, etc) Deploy and update ap...DNN Metro7 style Skin package: Metro7 style Skin for DotNetNuke 06.01.00: Changes on Version 06.01.00 Fixed issue on GraySmallTitle container, that breaks the layout Fixed issue on Blue Metro7 Skin where the Search, Login, Register, Date is missing Fixed issue with the Version numbers on the target file Fixed issue where the jQuery and jQuery-UI files not deleted on upgrade from Version 01.00.00 Added a internal page where the Image Slider would be replaces with a BannerPaneMedia Companion: MC 3.433b Release: General More GUI tweaks (mostly imperceptible!) Updates for mc_com.exe TV The 'Watched' button has been re-instigated Added TV Menu sub-option to search ALL for new Episodes (includes locked shows) Movies Added 'Source' field (eg DVD, Bluray, HDTV), customisable in Advanced Preferences (try it out, let us know how it works!) Added HTML <<format>> tag with optional parameters for video container, source, and resolution (updated HTML tags to be added to Documentation shortly) Known Issu...Picturethrill: Version 2.3.2.0: Release includes Self-Update feature for Picturethrill. What that means for users is that they are always guaranteed to have a fresh copy of Picturethrill on their computers with all latest fixes. When Picturethrill adds a new website to get pictures from, you will get it too!Simple MVVM Toolkit for Silverlight, WPF and Windows Phone: Simple MVVM Toolkit v3.0.0.0: Added support for Silverlight 5.0 and Windows Phone 7.1. Upgraded project templates and samples. Upgraded installer. There are some new prerequisites required for this version, namely Silverlight 5 Tools, Expression Blend Preview for Silverlight 5 (until the SDK is released), Windows Phone 7.1 SDK. Because it is in the experimental band, I have also removed the dependency on the Silverlight Testing Framework. You can use it if you wish, but the Ria Services project template no longer uses ...CODE Framework: 4.0.20301: The latest version adds a number of new features to the WPF system (such as stylable and testable messagebox support) as well as various new features throughout the system (especially in the Utilities namespace).MyRouter (Virtual WiFi Router): MyRouter 1.0.2 (Beta): A friendlier User Interface. A logger file to catch exceptions so you may send it to use to improve and fix any bugs that may occur. A feedback form because we always love hearing what you guy's think of MyRouter. Check for update menu item for you to stay up to date will the latest changes. Facebook fan page so you may spread the word and share MyRouter with friends and family And Many other exciting features were sure your going to love!WPF Sound Visualization Library: WPF SVL 0.3 (Source, Binaries, Examples, Help): Version 0.3 of WPFSVL. This includes three new controls: an equalizer, a digital clock, and a time editor.Orchard Project: Orchard 1.4: Please read our release notes for Orchard 1.4: http://docs.orchardproject.net/Documentation/Orchard-1-4-Release-NotesNew Projects1-2-3 Music Store Downloads Server: The 1-2-3 Music Store Downloads server is a WCF-powered web service allowing owners of the now defunct Easybe 1-2-3 music store to access downloads for their installation of the 1-2-3 music store via a web service.Bootstrap for Orchard: Bootstrap Framework for Orchard. Provides a dynamic build of the Bootstrap CSS framework allowing developers of modules and themes to dynamically add css (in less of course), variables, mixins, and settings. (includes the Orchard dotless module)Calculating With Workflow: Basic example of using the Workflow Foundation 4.CRM JS Helper for REST Endpoint: CRM JS Helper for REST EndpointDev3Lib: Dev3Lib is an opensource library. It tries to ease your daily business coding. You can find quite a few handy functions, class to facilitate your coding experiences. Have a fun in this library.Emotiv Engine Client: Provides an event-driven .NET framework wrapper around the managed Emotiv EPOC neuroheadset API.Ewk: All kinds of things.GeoTransformer: GeoTransformer focuses on making it easier for geocachers to process GPX files and publish them on their GPS devices.Glioma Visualizer 2: This C#.NET application does space-time analytical simulations for glioma modeling.Government of Canada Usability Web Experience Toolkit: This toolkit addresses the Governement of Canada usability for CLF. It is based on SharePoint 2010 Server and provides templates for a publishing site with variations enabled. This toolkit includes: 1. Master Pages 2. Page Layouts 3. Custom User Controls 4. Source CodeHappy Frog @ WinPhone: It is just another Angry-Birds-like game using Farseer physics engine and XNA framework. This project has didn't finish yet, but it is already stopped. Our developers had moved to another project base on this one, whatever, we'd like to public the code, as what we thought at begin —— this project is open source, under LGPL license 2.1.HyperVBackup: HyperVBackup is an open source tool to backup Hyper-V virtual machines, including support for Cluster Shared Storage (CSV).iBIOFind 3: This is a console based C#.NET application for experimental research work in informational retrieval for medical research.JV.MVVM: Jv.mvvm intents to bring the mvvm pattern to winform projects. This project provide a windows form extender control that allows to provide more rich binding information per control. The control interpret the bindings and manages them properly. It is developed in C#, and uses other projects like TinyPG, and Emmiter.jWeaving: Javascript PackageMicro APIs: Small APIs for .NETModel Maker 3: A C#.NET application for time series analysis.Neural Scribe 2: This C#.NET application classification of EEG signals.Object To Html Mapping (OHM) jQuery Plugin: Object To HTML Mapping(OHM) Is a jQuery Plugin that enables the ability to quickly transfer javascript object (or JSON) into your HTML and from the HTML revert back to object after user changes, easy use with ASP.NET . see http://www.lotofcode.blogspot.comRandomSamples: All my random tests and samplesRelate2spot: A C# and WPF application that finds relationships between entities using Latent Semantic Analysis in a large collection of texts.school15py: A Website base on Flask.Secure SQL Server: TBDSharePoint 2010 - Add Documents and List Items to Quick Deploy from ECB Dropdown: Adds functionality to the SharePoint 2010 graphical interface to allow end-users to add document library and list items to a Quick Deploy content deployment job. I copied http://quickdeploydoc.codeplex.com/ and made it 2010 compatible and for any item or document.SharePoint 2010 HTML5 MasterPage Templates: This project is the modification of the SharePoint 2010 v4.master template to support the HTML5 features in advanced browsers. It will provide a WSP package of the solutions with source to allow modification and deployment of a customized masterpage supporting HTML5.Sharepoint 2010 Workflow History & Task Custom SPField Column: This project was inspired by Marc D Anderson while attending Office365 Saturday event in Redmond, WA on February 25, 2012. While giving his presentation he mentioned that he created a solution to show tasks for a workflow via a jQuery dialog. Although I liked his idea, I hated that his solution was tailored for one client only, and could not be easily applied to any out of the box SPList. This is how this project came to be and I hope you can find it useful.SharePoint Content Database Size Monitor: Monitor and track the size of your SharePoint content databases and log files directly from Central AdministrationSNSpirit: A sns clientSoGames : jeux multi-écrans: SoGames : codes source des jeux mutli-écrans présentés aux Techdays 2012 Avec la palette des technologies et outils proposée par Microsoft, il est assez simple de réaliser des applications originales et de bonne qualité. Pour autant, rien n'est magique et quelques concepts nécessitent de se retrousser un peu les manches. Pour mieux les saisir, vous trouverez ici les codes source de nos jeux collaboratifs : - SoSlam : Le premier joueur doit lancer un écureuil dans les airs à l'aide de s...SPAC (SharePoint Auto Coder): SPAC is a code generation tool which developers can easily generate custom code to be used in custom SharePoint development projects. SPAC can generate code for a given language of choice based on a predefined code template. Developers can choose to define the code template and then with few clicks SPAC will generate the code based on the defined template.Sushi Library: ASP.Net MVC Helpers Library using BootStrap from TwitterSystemOfVote: ?????39?????,????2?: 1.??????,?????????,???????????????????; 2.?????????????????。test140880: testingTheatre: ??????Time Maestro 2: This is a C#.NET application for times series modeling and forecasting in the cloud.USGS DEM File Reader: USGS DEM file readerVoluntariado mobile (windows phone): Se trata de desarrollar una aplicación nativa para windows phone que ofrezca al usuario una oferta de oportunidades de voluntariado geolocalizadas en las que poder participarWCF Format Extensions for CSV, TXT: This project add support for Legacy formats like CSV, TXT (CSV Export) to the data service output and allow $format=txt query. By default WCF Data Services support Atom and JSON responses however legacy systems do not understand ATOM or JSON but they understand CSV, TXT formats. This project is intended to develop and TXT (CSV) for WCF Data services so that it can be used with legacy application.

    Read the article

  • CodePlex Daily Summary for Friday, March 30, 2012

    CodePlex Daily Summary for Friday, March 30, 2012Popular ReleasesSIPSorcery: SIPSorcery Softphone v1.0.0: The SIPSorcery softphone is a demo (note the "demo") application to prototype using .Net as a suitable runtime environment for a SIP softphone application requiring deterministic audio sampling and playback, it's not. And also to prototype placing calls via Google Voice's XMPP gateway, this works well.ScriptIDE: Release 4.4: ...Media Companion: MC 3.434b Release: General This release should be the last beta for 3.4xx. If there are no major problems, by the end of the week it will upgraded to 3.500 Stable! The latest mc_com.exe should be included too! TV Bug fix - crash when using XBMC scraper for TV episodes. Bug fix - episode count update when adding new episodes. Bug fix - crash when actors name was missing. Enhanced TV scrape progress text. Enhancements made to missing episodes display. Movies Bug fix - hide "Play Trailer" when multisaev...Better Explorer: Better Explorer 2.0.0.831 Alpha: - A new release with: - many bugfixes - changed icon - added code for more failsafe registry usage on x64 systems - not needed regfix anymore - added ribbon shortcut keys - Other fixes Note: If you have problems opening system libraries, a suggestion was given to copy all of these libraries and then delete the originals. Thanks to Gaugamela for that! (see discussion here: 349015 ) Note2: I was upload again the setup due to missing file!XAML Dialect Comparer Tool: Beta 1: This is a first beta version of this tool (as shown at DevConncetions in Vegas, March 2012). Community participation and suggestions are appreciated.LINQ Extensions Library: 1.0.2.7: Append and Prepend extensions (1.0.2.7) IndexOf extensions (1.0.2.7) New Align/Match extensions (1.0.2.6) Ready to use stable code with comprehensive unit tests and samples New Pivot extensions New Filter ExtensionsStartrinity.com Silverlight realtime multiple face and feature points detector: Version 1.2: *Added public methods to start and stop capturing *Added public access to captured snapshot. Applications can crop faces out of snapshot imageMonoGame - Write Once, Play Everywhere: MonoGame 2.5: The MonoGame team are pleased to announce that MonoGame v2.5 has been released. This release contains important bug fixes, implements optimisations and adds key features. MonoGame now has the capability to use OpenGLES 2.0 on Android and iOS devices, meaning it now supports custom shaders across mobile and desktop platforms. Also included in this release are native orientation animations on iOS devices and better Orientation support for Android. There have also been a lot of bug fixes since t...callisto: callisto 2.0.23: Patched Script static class and peak user count bug fix.Circuit Diagram: Circuit Diagram 2.0 Alpha 3: New in this release: Added components: Microcontroller Demultiplexer Flip & rotate components Open XML files from older versions of Circuit Diagram Text formatting for components New CDDX syntax Other fixesUmbraco CMS: Umbraco 5.1 CMS (Beta): Beta build for testing - please report issues at issues.umbraco.org (Latest uploaded: 5.1.0.123) What's new in 5.1? The full list of changes is on our http://progress.umbraco.org task tracking page. It shows items complete for 5.1, and 5.1 includes items for 5.0.1 and 5.0.2 listed there too. Here's two headline acts: Members5.1 adds support for backoffice editing of Members. We support the pairing up of our content type system in Hive with regular ASP.NET Membership providers (we ship a def...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.2.11: One Click Install from NuGet Changes to Version 2.1.2.11Code Changes 1. The project is now licenced under the Mozilla Public Licence 2. 2. User interface control and associated data access layer classes have been added to aid developers integrating 51Degrees.mobi into wider projects such as content management systems or web hosting management solutions. Use the following in a web form or user control to access these new UI components. <%@ Register Assembly="FiftyOne.Foundation" Namespace="...JSON Toolkit: JSON Toolkit 3.1: slight performance improvement (5% - 10%) new JsonException classPicturethrill: Version 2.3.28.0: Straightforward image selection. New clean UI look. Super stable. Simplified user experience.SQL Monitor - managing sql server performance: SQL Monitor 4.2 alpha 16: 1. finally fixed problem with logic fault checking for temporary table name... I really mean finally ...ScintillaNET: ScintillaNET 2.5: A slew of bug-fixes with a few new features sprinkled in. This release also upgrades the SciLexer and SciLexer64 DLLs to version 3.0.4. The official stuff: Issue # Title 32402 32402 27137 27137 31548 31548 30179 30179 24932 24932 29701 29701 31238 31238 26875 26875 30052 30052 Harness: Harness 2.0.2: change to .NET Framework Client Profile bug fix the download dialog auto answer. bug fix setFocus command. add "SendKeys" command. remove "closeAll" command. minor bugs fixed.BugNET Issue Tracker: BugNET 0.9.161: Below is a list of fixes in this release. Bug BGN-2092 - Link in Email "visit your profile" not functional BGN-2083 - Manager of bugnet can not edit project when it is not public BGN-2080 - clicking on a link in the project summary causes error (0.9.152.0) BGN-2070 - Missing Functionality On Feed.aspx BGN-2069 - Calendar View does not work BGN-2068 - Time tracking totals not ok BGN-2067 - Issues List Page Size Bug: Index was out of range. Must be non-negative and less than the si...YAF.NET (aka Yet Another Forum.NET): v1.9.6.1 RTW: v1.9.6.1 FINAL is .NET v4.0 ONLY v1.9.6.1 has: Performance Improvements .NET v4.0 improvements Improved FaceBook Integration KNOWN ISSUES WITH THIS RELEASE: ON INSTALL PLEASE DON'T CHECK "Upgrade BBCode Extensions...". More complete change list and discussion here: http://forum.yetanotherforum.net/yaf_postst14201_v1-9-6-1-RTW-Dated--3-26-2012.aspxCraig's Utility Library: Craig's Utility Library 3.1: This update adds about 60 new extension methods, a couple of new classes, and a number of fixes including: Additions Added DateSpan class Added GenericDelimited class Random additions Added static thread friendly version of Random.Next called ThreadSafeNext. AOP Manager additions Added Destroy function to AOPManager (clears out all data so system can be recreated. Really only useful for testing...) ORM additions Added PagedCommand and PageCount functions to ObjectBaseClass (same as M...New ProjectsBig-Tuto DirectX Site du Zéro: Dépôt de code source pour le big tuto DirectX du site du ZéroBlob Drop: Azure Blob Drop watches a local file folder (or several) and passes on any file changes (creates, updates, deletes) to a blob container in Windows Azure Storage account. Just "dump" files into a folder (such as content for a web site) and they will get uploaded to the cloud.C++ AMP Algorithms Library: C++ AMP Algorithms Library is a library of Parallel Patterns that C++ AMP developers can freely use in their own projects.C++ AMP BLAS Library: C++ AMP BLAS Library is a library of Basic Linear Algebra Subroutines that C++ AMP developers can freely use in their own projects.C++ AMP RNG Library: C++ AMP RNG Library is a library of Random Number Generators that C++ AMP developers can freely use in their own projects.cphobby: This is a project to high performance computing on WindowsCSharp Tesseract OCR GUI UTB Spring 2012: n/aecho test project: echo test projectFacebook Connection Manager: Facebook Application written in Asp.Net. Monitors the list of contacts (for its users), revealing when they or someone they know has lost a contact (e.g. deleted their profile or linkage). Works by storing all the auth tickets, extending them, and using them to regularly poll the facebook API.Fast Excel Spreadsheet Writer: The Fast Excel Spreadsheet Writer makes it easier for developers to write 2007 / 2010 Excel spreadsheets containing large sets of raw data. It can write hundreds of thousands of records in seconds. It is developed in C# and uses the Packaging namespace and Xml writers. fieldGames: Demonstrates wp7 gps featuresfucksmzdm: fuck smzdm projectGeo.LibraryManage: Geo.LibraryManageGraph my Code: Silverlight graph control and tools to visualize .net assembly in human readable way.Iron Server: Control Your PC IUBookStore: Build an online system the supports the process of renting and purchasing books from HCMC International University's Post-graduation Centerkage: how to make a kageLCDSmartie dll to display MediaPortal status: MP.dll allows the display of MediaPortal data on an LCDSmartie driven display. Uses WifiConnect and MPExtended to gain access to the MediaPortal data. Written in C.MaxiService: Controle Integrado de Serviço e ManutençãoNetduinoBot: This project is to have fun and learn more about .Net The plan is to improve a simple netduino based robot (2 powered wheels using stepper engines and a support wheel) Next steps: Adding BT communication Adding interactive driving Adding distance measurement Adding routingNovaUmbracoDemo: This is a demo site for Nova in Umbraco business domain.Orchard Members Only: This is a simple module to protect anonymous users from accessing specified content To utilize the feature, simply add the Members Only content part to any content type to make that content type available to authenticated users only.POC's project around web and azure related development: POC's project around web and azure related developmentPractice: nonepromising: asp.net mvc jqueryeasyui rbac asp.net mvc jqueryeasyui rbac asp.net mvc jqueryeasyui rbac asp.net mvc jqueryeasyui rbac asp.net mvc jqueryeasyui rbac asp.net mvc jqueryeasyui rbac asp.net mvc jqueryeasyui rbac asp.net mvc jqueryeasyui rbac asp.net mvc jqueryeasyui rbac asp.net mvRRPandora for RideRunner: RRPandora is a Pandora plugin for RideRunner front end. Play your pandora stations, create new ones, and love/hate your tracks all from within your car PC front end of choice. Discusion on RRPandora project can be found here: http://www.mp3car.com/rr-plugins/150505-so-have-you-guys-ever-heard-of-this-new-thing-called-pandora.htmlSharepoint & CRM Toolkit: Reusable components and tools to speed up Sharepoint and Dynamics CRM development, e.g. Site Definitions, Web Parts, Event Handlers, Workflows, Management Tools for sharepoint and Plugin, workflow, custom reports for MS CRM. Sharepoint QuotaCheck Webpart: A Sharepoint webpart wich shows a progressbar with the current percent usage from the maximum quota. Also shows the warning, max quota and the current usage in MB. Change color if the warning quota is reached.Silverlight MultiSelectComboBox: A multi-select combobox for Silverlight (hope this gets included in the toolkit at some time)Simple OWL.Api: Simple OWL.Api is a .Net OWL Api wrapper library.Taxi Please!: This is the Taxi Please! windows phone application.testtom03292012hg02: testtom03292012hg02testtom03292012tfs01: testtom03292012tfs01theBrent StartPage: A simple personal start page portalVirtualization Automation via Powershell: Scratch Project to enable Virtualization Automation via PowershellXAML Dialect Comparer Tool: This tool allows for comparison of different XAML dialects and utilized framework namespaces. Want to know if your Silverlight project will translate well to Windows 8 Metro? And whether your Metro assets can be reused in your Windows Phone app? And how about that WPF app? This helpful tool provides some interesting metrics. Note that it only compares types/classes and all their members. It makes no comparison of behavior differences between classes and members of identical names.

    Read the article

  • Understanding the value of Customer Experience & Loyalty for the Telecommunications Industry

    - by raul.goycoolea
    Worried by economic woes and market forces, especially in mature markets, communications service providers (CSPs) increasingly focus on improving customer experience. In fact, it seems difficult to find a major message by a C-level executive in the developed world that does not include something on "meeting and exceeding customers' needs". Frequently in customer satisfaction studies by prominent firms, CSPs fall short of the leadership demonstrated by other industries that take customer-centric approaches to their bottom-line strategies. Consider the following:Despite the continued impact of global economic crisis, in July 2010, Apple Computer posted record revenue and net quarterly profit. Those who attribute the results primarily to the iPhone 4 launch should note that Apple also shipped around 30% more Macintosh computers than the same period the previous year. Even sales of the iPod line increased by 8% in a highly commoditized, shrinking media player market. Finally, Apple began selling iPads during the quarter, with total sales of more than 3 million units. What does Apple have that the others lack? Well, some great products (and services) to be sure, but it also excels at customer service and support, marketing, and distribution, and has one of the strongest brands globally. Its products are useful, simple to use, easy to acquire and augment, high quality, and considered very cool. They also evoke such an emotional response from many of Apple's customers, which they turn up their noses at competitive products.In other words, Apple appears to have mastered virtually every aspect of customer experience and the resultant loyalty of its customer base - even in difficult financial times. Through that unwavering customer focus, Apple continues to drive its revenues and profits to new heights. Other customer loyalty leaders like Wal-Mart, Google, Toyota and Honda are also doing well by focusing on customer experience as an essential driver of profitability. Service providers should note this performance and ask themselves how they might leverage the same principles to increase their own profitability. After all, that is what customer experience and loyalty are all about: profitability.To successfully manage all the critical touch points of customer experience, CSPs must shun the one-size-fits-all approach. They can no longer afford to view customer service fundamentally as an act of altruism - which mentality dates back to the industry's civil service days, when CSPs were typically government organizations that were critical to economic development and public safety.As regulators and public officials have pushed, and continue to push, service providers to new heights of reliability - using incentives and punishments - most CSPs already have some of the fundamental building blocks of customer service in place. Yet despite that history and experience, service providers still lag other industries in providing what is seen as good customer service.As we observed in the TMF's 2009 Insights Research report, Customer Experience Management: Driving Loyalty & Profitability there has been resurgence in interest by CSPs. More and more of them have stated ambitions to catch up other industries, and they are realizing that good customer service is a powerful strategy for increasing business performance and profitability, not an act of good will.CSPs are recognizing the connection between customer experience and profitability, as demonstrated in many studies. For example, according to research by Bain & Company, a 5 percent improvement in customer retention rates can yield as much as a 75 percent increase in profits for companies across a range of industries.After decades of customer experience strategy formulation, Bain partner and business author, Frederick Reichheld, considers "would you recommend us to a friend?" as the ultimate question for a customer. How many times have you or your friends recommended an iPod, iPhone or a Mac? What do your children recommend to their peers? Their peers to them?There are certain steps service providers have to take to create more personalized relationships with their customers, as well as reduce churn and increase profitability, all while becoming leaner and more agile. First, they have to define customer experience, we define it as the result of the sum of observations, perceptions, thoughts and feelings arising from interactions and relationships between customers and their service provider(s). Virtually every customer touch point - whether directly or indirectly linked to service providers and their partners - contributes to customer perception, satisfaction, loyalty, and ultimately profitability. Gaining leadership in customer experience and satisfaction will not be a simple task, as it is affected by virtually every customer-facing aspect of the service provider, and in turn impacts the service provider deeply - especially on the all-important bottom line. The scope of issues affecting customer experience is complex and dynamic.With new services, devices and applications extending the basis of customer experience to domains beyond the direct control of the service provider, it is likely to increase in complexity and dynamism.Customer loyalty = increased profitsAs stated earlier, customer experience programs are not fundamentally altruistic exercises, but a strategic means of improving competitiveness and profitability in the short and long term. Loyalty is essential to deriving long term profits from customers.Some of the earliest loyalty programs date back to the 1930s, when packaged goods companies offered embedded coupons for rewards to buyers, and eventually retail chains began offering reward programs to frequent shoppers. These programs continued for decades but were leapfrogged in the 1980s by more aggressive programs from the airlines.This movement was led by American Airlines, which launched the first full-scale loyalty marketing program of the modern era with the AAdvantage frequent flyer scheme. It was the first to reward frequent fliers with notional air miles that could be accumulated and later redeemed for free travel. Figure 1: Opportunities example of Customer loyalty driven profitOther airlines and travel providers were quick to grasp the incredible value of providing customers with an incentive to use their company exclusively. Within a few years, dozens of travel industry companies launched similar initiatives and now loyalty programs are achieving near-ubiquity in many service industries, especially those in which it is difficult to differentiate offerings by product attributes.The belief is that increased profitability will result from customer retention efforts because:•    The cost of acquisition occurs only at the beginning of a relationship: the longer the relationship, the lower the amortized cost;•    Account maintenance costs decline as a percentage of total costs, or as a percentage of revenue, over the lifetime of the relationship;•    Long term customers tend to be less inclined to switch and less price sensitive which can result in stable unit sales volume and increases in dollar-sales volume;•    Long term customers may initiate word-of-mouth promotions and referrals, which cost the company nothing and arguably are the most effective form of advertising;•    Long-term customers are more likely to buy ancillary products and higher margin supplemental products;•    Long term customers tend to be satisfied with their relationship with the company and are less likely to switch to competitors, making market entry or competitors gaining market share difficult;•    Regular customers tend to be less expensive to service, as they are familiar with the processes involved, require less 'education', and are consistent in their order placement;•    Increased customer retention and loyalty makes the employees' jobs easier and more satisfying. In turn, happy employees feed back into higher customer satisfaction in a virtuous circle. Figure 2: The virtuous circle of customer loyaltyFigure 2 represents a high-level example of a virtuous cycle driven by customer satisfaction and loyalty, depicting how superiority in product and service offerings, as well as strong customer support by competent employees, lead to higher sales and ultimately profitability. As stated above, this is not a new concept, but succeeding with it is difficult. It has eluded many a company driven to achieve profitability goals. Of course, for this circle to be virtuous, the customer relationship(s) must be profitable.Trying to maintain the loyalty of unprofitable customers is not a viable business strategy. It is, therefore, important that marketers can assess the profitability of each customer (or customer segment), and either improve or terminate relationships that are not profitable. This means each customer's 'relationship costs' must be understood and compared to their 'relationship revenue'. Customer lifetime value (CLV) is the most commonly used metric here, as it is generally accepted as a representation of exactly how much each customer is worth in monetary terms, and therefore a determinant of exactly how much a service provider should be willing to spend to acquire or retain that customer.CLV models make several simplifying assumptions and often involve the following inputs:•    Churn rate represents the percentage of customers who end their relationship with a company in a given period;•    Retention rate is calculated by subtracting the churn rate percentage from 100;•    Period/horizon equates to the units of time into which a customer relationship can be divided for analysis. A year is the most commonly used period for this purpose. Customer lifetime value is a multi-period calculation, often projecting three to seven years into the future. In practice, analysis beyond this point is viewed as too speculative to be reliable. The model horizon is the number of periods used in the calculation;•    Periodic revenue is the amount of revenue collected from a customer in a given period (though this is often extended across multiple periods into the future to understand lifetime value), such as usage revenue, revenues anticipated from cross and upselling, and often some weighting for referrals by a loyal customer to others; •    Retention cost describes the amount of money the service provider must spend, in a given period, to retain an existing customer. Again, this is often forecast across multiple periods. Retention costs include customer support, billing, promotional incentives and so on;•    Discount rate means the cost of capital used to discount future revenue from a customer. Discounting is an advanced method used in more sophisticated CLV calculations;•    Profit margin is the projected profit as a percentage of revenue for the period. This may be reflected as a percentage of gross or net profit. Again, this is generally projected across the model horizon to understand lifetime value.A strong focus on managing these inputs can help service providers realize stronger customer relationships and profits, but there are some obstacles to overcome in achieving accurate calculations of CLV, such as the complexity of allocating costs across the customer base. There are many costs that serve all customers which must be properly allocated across the base, and often a simple proportional allocation across the whole base or a segment may not accurately reflect the true cost of serving that customer;  This is made worse by the fragmentation of customer information, which is likely to be across a variety of product or operations groups, and may be difficult to aggregate due to different representations.In addition, there is the complexity of account relationships and structures to take into consideration. Complex account structures may not be understood or properly represented. For example, a profitable customer may have a separate account for a second home or another family member, which may appear to be unprofitable. If the service provider cannot relate the two accounts, CLV is not properly represented and any resultant cancellation of the apparently unprofitable account may result in the customer churning from the profitable one.In summary, if service providers are to realize strong customer relationships and their attendant profits, there must be a very strong focus on data management. This needs to be coupled with analytics that help business managers and those who work in customer-facing functions offer highly personalized solutions to customers, while maintaining profitability for the service provider. It's clear that acquiring new customers is expensive. Advertising costs, campaign management expenses, promotional service pricing and discounting, and equipment subsidies make a serious dent in a new customer's profitability. That is especially true given the rising subsidies for Smartphone users, which service providers hope will result in greater profits from profits from data services profitability in future.  The situation is made worse by falling prices and greater competition in mature markets.Customer acquisition through industry consolidation isn't cheap either. A North American service provider spent about $2,000 per subscriber in its acquisition of a smaller company earlier this year. While this has allowed it to leapfrog to become the largest mobile service provider in the country, it required a total investment of more than $28 billion (including assumption of the acquiree's debt).While many operating cost synergies clearly made this deal more attractive to the acquiring company, this is certainly an expensive way to acquire customers: the cost per subscriber in this case is not out of line with the prices others have paid for acquisitions.While growth by acquisition certainly increases overall revenues, it often creates tremendous challenges for profitability. Organic growth through increased customer loyalty and retention is a more effective driver of profit, as well as a stronger predictor of future profitability. Service providers, especially those in mature markets, are increasingly recognizing this and taking steps toward a creating a more personalized, flexible and satisfying experience for their customers.In summary, the clearest path to profitability for companies in virtually all industries is through customer retention and maximization of lifetime value. Service providers would do well to recognize this and focus attention on profitable customer relationships.

    Read the article

  • CodePlex Daily Summary for Monday, March 14, 2011

    CodePlex Daily Summary for Monday, March 14, 2011Popular ReleasesProDinner - ASP.NET MVC EF4 Code First DDD jQuery Sample App: first release: ProDinner is an ASP.NET MVC sample application, it uses DDD, EF4 Code First for Data Access, jQuery and MvcProjectAwesome for Web UI, it has Multi-language User Interface Features: CRUD and search operations for entities Multi-Language User Interface upload and crop Images (make thumbnail) for meals pagination using "more results" button very rich and responsive UI (using Mvc Project Awesome) Multiple UI themes (using jQuery UI themes)Personal Activity Monitor - increas your productivity by eliminating timewasters: Personal Activity Monitor v0.1.2: removed PreEmptive monitoring attributes - maybe will be back in the future added scrollbars to the list of apps :)BEPUphysics: BEPUphysics v0.15.0: BEPUphysics v0.15.0!LiveChat Starter Kit: LCSK v1.1: This release contains couple of new features and bug fixes including: Features: Send chat transcript via email Operator can now invite visitor to chat (pro-active chat request) Bug Fixes: Operator management (Save and Delete) bug fixes Operator Console chat small fixesIronRuby: 1.1.3: IronRuby 1.1.3 is a servicing release that keeps on improving compatibility with Ruby 1.9.2 and includes IronRuby integration to Visual Studio 2010. We decided to drop 1.8.6 compatibility mode in all post-1.0 releases. We recommend using IronRuby 1.0 if you need 1.8.6 compatibility. The main purpose of this release is to sync with IronPython 2.7 release, i.e. to keep the Dynamic Language Runtime that both these languages build on top shareable. This release also fixes a few bugs: 5763 Use...SQL Server PowerShell Extensions: 2.3.2.1 Production: Release 2.3.2.1 implements SQLPSX as PowersShell version 2.0 modules. SQLPSX consists of 13 modules with 163 advanced functions, 2 cmdlets and 7 scripts for working with ADO.NET, SMO, Agent, RMO, SSIS, SQL script files, PBM, Performance Counters, SQLProfiler, Oracle and MySQL and using Powershell ISE as a SQL and Oracle query tool. In addition optional backend databases and SQL Server Reporting Services 2008 reports are provided with SQLServer and PBM modules. See readme file for details.Image.Viewer: 2011.2: Whats new for Image.Viewer 2011.2: New open from file New about dialog Minor Bug Fix's, improvements and speed upsIronPython: 2.7: On behalf of the IronPython team, I'm very pleased to announce the release of IronPython 2.7. This release contains all of the language features of Python 2.7, as well as several previously missing modules and numerous bug fixes. IronPython 2.7 also includes built-in Visual Studio support through IronPython Tools for Visual Studio. IronPython 2.7 requires .NET 4.0 or Silverlight 4. To download IronPython 2.7, visit http://ironpython.codeplex.com/releases/view/54498. Any bugs should be report...XML Explorer: XML Explorer 4.0.2: Changes in 4.0: This release is built on the Microsoft .NET Framework 4 Client Profile. Changed XSD validation to use the schema specified by the XML documents. Added a VS style Error List, double-clicking an error takes you to the offending node. XPathNavigator schema validation finally gives SourceObject (was fixed in .NET 4). Added Namespaces window and better support for XPath expressions in documents with a default namespace. Added ExpandAll and CollapseAll toolbar buttons (in a...Mobile Device Detection and Redirection: 1.0.0.0: Stable Release 51 Degrees.mobi Foundation has been in beta for some time now and has been used on thousands of websites worldwide. We’re now highly confident in the product and have designated this release as stable. We recommend all users update to this version. New Capabilities MappingsTo improve compatibility with other libraries some new .NET capabilities are now populated with wurfl data: “maximumRenderedPageSize” populated with “max_deck_size” “rendersBreaksAfterWmlAnchor” populated ...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.3: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager added interactive search for the lookupWPF Inspector: WPF Inspector 0.9.7: New Features in Version 0.9.7 - Support for .NET 3.5 and 4.0 - Multi-inspection of the same process - Property-Filtering for multiple keywords e.g. "Height Width" - Smart Element Selection - Select Controls by clicking CTRL, - Select Template-Parts by clicking CTRL+SHIFT - Possibility to hide the element adorner (over the context menu on the visual tree) - Many bugfixes??????????: All-In-One Code Framework ??? 2011-03-10: http://download.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1codechs&DownloadId=216140 ??,????。??????????All-In-One Code Framework ???,??20?Sample!!????,?????。http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ASP.NET ??: CSASPNETBingMaps VBASPNETRemoteUploadAndDownload CS/VBASPNETSerializeJsonString CSASPNETIPtoLocation CSASPNETExcelLikeGridView ....... Winform??: FTPDownload FTPUpload MultiThreadedWebDownloader...Rawr: Rawr 4.1.0: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a Release of the WPF version, most of the general issues have been resolved. If you have a problem, please follow the Posting Guidelines and put it into the Issue Tracker. Whe...PHP Manager for IIS: PHP Manager 1.1.2 for IIS 7: This is a localization release of PHP Manager for IIS 7. It contains all the functionality available in 56962 plus a few bug fixes (see change list for more details). Most importantly this release is translated into five languages: German - the translation is provided by Christian Graefe Dutch - the translation is provided by Harrie Verveer Turkish - the translation is provided by Yusuf Oztürk Japanese - the translation is provided by Kenichi Wakasa Russian - the translation is provid...TweetSharp: TweetSharp v2.0.0: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Beta ChangesAdded user streams support Serialization is not attempted for Twitter 5xx errors Fixes based on feedback Third Party Library VersionsHammock v1.2.0: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comOffice Web.UI: Version 2.4: After having lost all modifications done for 2.3. I finally did it again... Have a look at http://www.officewebui.com/change-log Also, the documentation continues to grow... http://www.officewebui.com/category/kb ThanksmyCollections: Version 1.3: New in version 1.3 : Added Editor management for Books Added Amazon API for Books Us, Fr, De Added Amazon Us, Fr, De for Movies Added The MovieDB for Fr and De Added Author for Books Added Editor and Platform for Games Added Amazon Us, De for Games Added Studio for XXX Added Background for XXX Bug fixing with Softonic API Bug fixing with IMDB UI improvement Removed GraceNote Added Amazon Us,Fr, De for Series Added TVDB Fr and De for Series Added Tracks for Musi...patterns & practices : Composite Services: Composite Services Guidance - CTP2: Overview The Composite Services guidance (codename Reykjavik) provides best practices and capabilities for applying industry-known SOA design patterns when building robust, connected, service-oriented composite enterprise applications. These capabilities are implemented as a set of reusable components for analytic tracing, service virtualization, metadata centralization and versioning, and policy centralization as well as exception management, included in this release. Changes in this CTP ...Python Tools for Visual Studio: 1.0 Beta 1: Beta 1You can't install IronPython Tools for Visual Studio side-by-side with Python Tools for Visual Studio. A race condition sometimes causes local MPI debugging to miss breakpoints. When MPI jobs on a cluster fail they don’t get cleaned up correctly, which can cause debugging to stall because the associated MPI job is stuck in the queue. The "Threads" view has a race condition which can cause it not to display properly at times. VS2010 shortcuts that are pinned to the taskbar are so...New ProjectsASPRazorWebGrid: ASPRazorWebGrid can be used as an alternative for the built-in WebGrid in ASP.NET MVC3 using Razor. Features: - Server-side sorting and paging - Choice between url grid sort/paging parameters or page postback - Clean pager layoutBert Automation Framework: Bert Automation Framework. Bert can be leveraged to create automated tests for Windows or Web based applications. Framework is developed in C# using Visual Studio 2010, Microsofts AutomationUI and/or WATIN and be used to create automated tests. CasinoBot - A C# IRC gambling bot: CasinoBot is an IRC bot which allows you to play eight games. You can play single- and multiplayer games like hangman or slot. Includes a currency system, multi-channel support and a huge wordlist. The bot is written in C# using the SmartIRC4Net library.Cheque Management: This is a Cheque management project that help people to manage their cheque.CityLife: CityLife is a silverlight gameEmpty Razor Generator: A stripped down single file generator powered by Razor. Similiar to other generators available with the exception that is an absolute minimal implmentation. It's easy to tweak and very flexible. Driven in part because I would love to see it on WPF/WP7/Silverlight.ExtendedWorkFlow: Umbraco Extended WorkFlow to add extra functionality to create workflow process maps that can execute assemblies via commands and that have set stages. All stages, action and commands are logged within the umbraco audit trail. States and Action are also locked to user or role.Fluent CodeDOM: A library which allows you to work with CodeDOM in a way that is similar to the way you write your code. The library allows you to write your generated code much faster and make it more readable. Also, the usage of this library is very intuitive.FT: wftGoogle Map control for ASP.NET MVC: The control wraps Google maps API simplifying the use of Google maps in ASP.NET MVC applications. Based on Telerik Extensions for ASP.NET MVC this control shows how easy is to extend the Telerik framawork by building your own controls for ASP.NET MVC.GooNews - A WP7 Application: A Windows Phone 7 application. iTimeTrack IssueTracker: The iTimeTrack IssueTracker project is a (the AGPL open-source) subset of of the iTimeTrack time and issue tracker app that you can customize for your organizations use.jcompare: jcomparejuwenxue: submit some free bookKinect Finger Paint: Kinect Finger Paint is a Kinect application build on the OpenNI framework. It is meant as a tutorial and playground for experimenting with the Kinect interface.MTA_XNA_11_B: hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hProgrammingPractice: VC++ Programming PracticeSimple Backlog for Visual Studio: An enhanced task list for VS 2010, designed to make it easier to manage a backlog of features. Written in C# and WPF. Released under the Apache 2.0 licence.Text Reader: Text reader allows you to enter a text and it will read it up for you using TTS in windows. It's developed in C#.TrainTraX: TrainTraX is a system for training and certifying users with simple multiple choice question tests.Windows Charting: A windows charting application that uses microsoft charting controls for visual studio 2008WPFReveil: WPFReveil is a digital clock control on WPF. This project is composed two elements. WPFReveil.App is the application. WPFReveil contains the control clock.

    Read the article

  • CodePlex Daily Summary for Tuesday, January 04, 2011

    CodePlex Daily Summary for Tuesday, January 04, 2011Popular ReleasesMini Memory Dump Diagnosis using Asp.Net: MiniDump HealthMonitor: Enable developers to generate mini memory dumps in case of unhandled exceptions or for specific exception scenarios without using any external tools , only using Asp.Net 2.0 and above. Many times in production , QA Servers the issues require post-mortem or low-level system debugging efforts. This Memory dump generator will help in those scenarios.EnhSim: EnhSim 2.2.9 BETA: 2.2.9 BETAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added in the Gobl...xUnit.net - Unit Testing for .NET: xUnit.net 1.7 Beta: xUnit.net release 1.7 betaBuild #1533 Important notes for Resharper users: Resharper support has been moved to the xUnit.net Contrib project. Important note for TestDriven.net users: If you are having issues running xUnit.net tests in TestDriven.net, especially on 64-bit Windows, we strongly recommend you upgrade to TD.NET version 3.0 or later. This release adds the following new features: Added support for ASP.NET MVC 3 Added Assert.Equal(double expected, double actual, int precision)...Json.NET: Json.NET 4.0 Release 1: New feature - Added Windows Phone 7 project New feature - Added dynamic support to LINQ to JSON New feature - Added dynamic support to serializer New feature - Added INotifyCollectionChanged to JContainer in .NET 4 build New feature - Added ReadAsDateTimeOffset to JsonReader New feature - Added ReadAsDecimal to JsonReader New feature - Added covariance to IJEnumerable type parameter New feature - Added XmlSerializer style Specified property support New feature - Added ...StyleCop for ReSharper: StyleCop for ReSharper 5.1.14977.000: Prerequisites: ============== o Visual Studio 2008 / Visual Studio 2010 o ReSharper 5.1.1753.4 o StyleCop 4.4.1.2 Preview This release adds no new features, has bug fixes around performance and unhandled errors reported on YouTrack.BloodSim: BloodSim - 1.3.1.0: - Restructured simulation log back end to something less stupid to drastically reduce simulation time and memory usage - Removed a debug log entry that was left over from testing of 1.3.0.0 - Fixed a rounding and calculation error with Haste rating - Added option for Rune of SwordshatteringDbDocument: DbDoc Initial Version: DbDoc Initial versionASP .NET MVC CMS (Content Management System): Atomic CMS 2.1.2: Atomic CMS 2.1.2 release notes Atomic CMS installation guide Kind Of Magic MSBuild Task: Beta 4: Update to keep up with latest bug fixes. To those who don't like Magic/NoMagic attributes, you may change these names in KindOfMagic.targets file: Change this line: <MagicTask Assembly="@(IntermediateAssembly)" References="@(ReferencePath)"/> to something like this: <MagicTask Assembly="@(IntermediateAssembly)" References="@(ReferencePath)" MagicAttribute="MyMagicAttribute" NoMagicAttribute="MyNoMagicAttribute"/>N2 CMS: 2.1: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. Major Changes Support for auto-implemented properties ({get;set;}, based on contribution by And Poulsen) All-round improvements and bugfixes File manager improvements (multiple file upload, resize images to fit) New image gallery Infinite scroll paging on news Content templates First time with N2? Try the demo site Download one of the template packs (above) and open the proj...Wii Backup Fusion: Wii Backup Fusion 1.0: - Norwegian translation - French translation - German translation - WBFS dump for analysis - Scalable full HQ cover - Support for log file - Load game images improved - Support for image splitting - Diff for images after transfer - Support for scrubbing modes - Search functionality for log - Recurse depth for Files/Load - Show progress while downloading game cover - Supports more databases for cover download - Game cover loading routines improvedAutoLoL: AutoLoL v1.5.1: Fix: Fixed a bug where pressing Save As would not select the Mastery Directory by default Unexpected errors are now always reported to the user before closing AutoLoL down.* Extracted champion data to Data directory** Added disclaimer to notify users this application has nothing to do with Riot Games Inc. Updated Codeplex image * An error report will be shown to the user which can help the developers to find out what caused the error, this should improve support ** We are working on ...TortoiseHg: TortoiseHg 1.1.8: TortoiseHg 1.1.8 is a minor bug fix release, with minor improvementsBlogEngine.NET: BlogEngine.NET 2.0: Get DotNetBlogEngine for 3 Months Free! Click Here for More Info 3 Months FREE – BlogEngine.NET Hosting – Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.0 instructions. To get started, be sure to check out our installatio...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.6 Released: Hi, Today we are releasing final version of Visifire, v3.6.6 with the following new feature: * TextDecorations property is implemented in Title for Chart. * TitleTextDecorations property is implemented in Axis. * MinPointHeight property is now applicable for Column and Bar Charts. Also this release includes few bug fixes: * ToolTipText property of DataSeries was not getting applied from Style. * Chart threw exception if IndicatorEnabled property was set to true and Too...StyleCop Compliant Visual Studio Code Snippets: Visual Studio Code Snippets - January 2011: StyleCop Compliant Visual Studio Code Snippets Visual Studio 2010 provides C# developers with 38 code snippets, enhancing developer productivty and increasing the consistency of the code. Within this project the original code snippets have been refactored to provide StyleCop compliant versions of the original code snippets while also adding many new code snippets. Within the January 2011 release you'll find 82 code snippets to make you more productive and the code you write more consistent!...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.2: Version: 2.0.0.2 (Milestone 2): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...DocX: DocX v1.0.0.11: Building Examples projectTo build the Examples project, download DocX.dll and add it as a reference to the project. OverviewThis version of DocX contains many bug fixes, it is a serious step towards a stable release. Added1) Unit testing project, 2) Examples project, 3) To many bug fixes to list here, see the source code change list history.Cosmos (C# Open Source Managed Operating System): 71406: This is the second release supporting the full line of Visual Studio 2010 editions. Changes since release 71246 include: Debug info is now stored in a single .cpdb file (which is a Firebird database) Keyboard input works now (using Console.ReadLine) Console colors work (using Console.ForegroundColor and .BackgroundColor)Paint.NET PSD Plugin: 1.6.0: Handling of layer masks has been greatly improved. Improved reliability. Many PSD files that previously loaded in as garbage will now load in correctly. Parallelized loading. PSD files containing layer masks will load in a bit quicker thanks to the removal of the sequential bottleneck. Hidden layers are no longer made visible on save. Many thanks to the users who helped expose the layer masks problem: Rob Horowitz, M_Lyons10. Please keep sending in those bug reports and PSD repro files!New Projects3D SharePoint Tag Cloud in Silverlight: This is a Silverlight Tag Cloud intended for use in SharePoint but can be configured for use separately as well. Based on a blog post from Peter Gerritsen (http://blog.petergerritsen.nl/2009/02/14/creating-a-3d-tagcloud-in-silverlight-part-1/).AffinityUI for Unity 3D: AffinityUI makes writing GUI code for Unity 3D easier with a component based API that allows you to write GUIs in a declarative fashion using a fluent interface, update events and powerful two-way databinding. A visual editor and scene GUI support are planned for the future.calendar synchronization: This will enable tight integration between ivvy core and infragistics scheduler. Will utilize oData and native isolated strorage instead of SQLite as planed earlier.Card Games Library: The aim of this project is to offer a framework for creating card games logics and rules. This project is not focused on particular games but offers a felxible and extensible base for creating card games, like; poker, solitaire, rummy, etcDbDocument: DbDoc tool seeks to be helper tool side by side with MS SQL server management studio tool, you can design your DB Tables in visualized way through Diagrams and then use “DbDoc” tool to generate design document in MS Word table formatDelux: Delux project for educationDnEcuDiag - A .NET Ecu Diagnostic Application: DnEcuDiag is an application framework for developing electronic control unit diagnostic functionality without the need to implement code.Dynamics CRM 4.0 Recycle Bin: This add-on for Microsoft Dynamics CRM 4.0 to enable Recycle Bin Features (Restore, Permenant Delete) for CRM users.EPPLib.it: Il sistema sincrono di registrazione e mantenimento dei nomi a dominio del Registro.it utilizza il protocollo EPP (Extensible Provisioning Protocol). EPPLib consente di interfacciare i propri progetti con il sistema sincrono del Registro.it.IoC4Fun: Very LightWeight IoC or DI Container only required Net Framework 3.5 written in C#. For Small Apps or Educational purpose. Not intrusion code added like others Containers. Just Plan Register Dependencies and Let Container resolve magically the Injection Dependencies.ISocial: WP7 Application, centralise les réseaux sociauxJohnnyIssa: begASP.NET Version 4.LiveCPE: LiveCPE is an Academic project based on C# and ASP.Net. It aims to be a social network website. MS CRM - Skype Connector: Skype Addon for Microsoft Dynamics CRM allows to dial CRM Contacts, Lead and so on via Skype. It's developed in ASP.NET and C#.Ryan's Projects: a group of random c# projectsSeleniuMspec: SeleniuMspec is a template for Selenium IDE that generates Selenium tests for Mspec (a .NET BDD framework). SharePoint FAQ Web Part: The SharePoint FAQ Web Part makes it easier for SharePoint Users to display FAQs feature on their SharePoint sites. You'll no longer have to maintain HTML and anchors in the Content Editor Web Part, as the FAQs are now automatically generated from a SharePoint list. Silverlight Planet: Projetos da comunidade Silverlight Planet www.silverlightplanet.net.brWP7 Expense Report: Expense Report for Windows Phone 7xll - the easy way to create Excel add-ins: The xll C++ library makes it easy to create xll add-ins for Excel. It also supports the big grid, wide-character strings, and thread-safe functions. ????????: ????,??,??,????,????,??????

    Read the article

  • CodePlex Daily Summary for Tuesday, April 10, 2012

    CodePlex Daily Summary for Tuesday, April 10, 2012Popular ReleasesSCCM Client Actions Tool: SCCM Client Actions Tool v1.12: SCCM Client Actions Tool v1.12 is the latest version. It comes with following changes since last version: Improved WMI date conversion to be aware of timezone differences and DST. Fixed new version check. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA on Windows XP. Cmdkey.exe is natively availab...Dual Browsing: Dual Browser: Please note the following: I setup the address bar temporarily to only accepts http:// .com addresses. Just type in the name of the website excluding: http://, www., and .com; (Ex: for www.youtube.com just type: youtube then click OK). The page splitter can be grabbed by holding down your left mouse button and move left or right. By right clicking on the page background, you can choose to refresh, go back a page and so on. Demo video: http://youtu.be/L7NTFVM3JUYMultiwfn: Multiwfn 2.3.3: Multiwfn 2.3.3Liberty: v3.2.0.1 Release 9th April 2012: Change Log-Fixed -Reach Fixed a bug where the object editor did not work on non-English operating systemsStyleCop+: StyleCop+ 1.8: Built over StyleCop 4.7.17.0 According to http://stylecop.codeplex.com/workitem/7156, it should be the last version which is released without new features and only for compatibility reasons. Do not forget to Unblock the file after downloading (more details) Stay tuned!Path Copy Copy: 10.1: This release addresses the following work items: 11357 11358 11359 This release is a recommended upgrade, especially for users who didn't install the 10.0.1 version.ExtAspNet: ExtAspNet v3.1.3: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ??????????。 ExtAspNet ??????? JavaScript,?? CSS,?? UpdatePanel,?? ViewState,?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????:Apache License 2.0 (Apache) ??:http://extasp.net/ ??:http://bbs.extasp.net/ ??:http://extaspnet.codeplex.com/ ??:http://sanshi.cnblogs.com/ ????: +2012-04-08 v3.1.3 -??Language="zh_TW"?JS???BUG(??)。 +?D...Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.5.5: New Controls ChatBubble ChatBubbleTextBox OpacityToggleButton New Stuff TimeSpan languages added: RU, SK, CS Expose the physics math from TimeSpanPicker Image Stretch now on buttons Bug Fixes Layout fix so RoundToggleButton and RoundButton are exactly the same Fix for ColorPicker when set via code behind ToastPrompt bug fix with OnNavigatedTo Toast now adjusts its layout if the SIP is up Fixed some issues with Expression Blend supportHarness - Internet Explorer Automation: Harness 2.0.3: support the operation fo frameset, frame and iframe Add commands SwitchFrame GetUrl GoBack GoForward Refresh SetTimeout GetTimeout Rename commands GetActiveWindow to GetActiveBrowser SetActiveWindow to SetActiveBrowser FindWindowAll to FindBrowser NewWindow to NewBrowser GetMajorVersion to GetVersionBetter Explorer: Better Explorer 2.0.0.861 Alpha: - fixed new folder button operation not work well in some situations - removed some unnecessary code like subclassing that is not needed anymore - Added option to make Better Exlorer default (at least for WIN+E operations) - Added option to enable file operation replacements (like Terracopy) to work with Better Explorer - Added some basic usability to "Share" button - Other fixesText Designer Outline Text: Version 2 Preview 2: Added Fake 3D demos for C++ MFC, C# Winform and C# WPFLightFarsiDictionary - ??????? ??? ?????/???????: LightFarsiDictionary - v1: LightFarsiDictionary - v1WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.3: Version: 2.5.0.3 (Milestone 3): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete [O] WAF: Mark the StringBuilderExtensions class as obsolete because the AppendInNewLine method can be replaced with string.Jo...GeoMedia PostGIS data server: PostGIS GDO 1.0.1.2: This is a new version of GeoMeda PostGIS data server which supports user rights. It means that only those feature classes, which the current user has rights to select, are visible in GeoMedia. Issues fixed in this release Fixed problem with renaming and deleting feature classes - IMPORTANT! - the gfeatures view must be recreated so that this issue is completely fixed. The attached script "GFeaturesView2.sql" can be used to accomplish this task. Another way is to drop and recreate the metadat...SkyDrive Connector for SharePoint: SkyDrive Connector for SharePoint: Fixed a few bugs pertaining to live authentication Removed dependency on Shared Documents Removed CallBack web part propertyClosedXML - The easy way to OpenXML: ClosedXML 0.65.2: Aside from many bug fixes we now have Conditional Formatting The conditional formatting was sponsored by http://www.bewing.nl (big thanks) New on v0.65.1 Fixed issue when loading conditional formatting with default values for icon sets New on v0.65.2 Fixed issue loading conditional formatting Improved inserts performanceMSBuild Extension Pack: April 2012: Release Blog Post The MSBuild Extension Pack April 2012 release provides a collection of over 435 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUID’...DotNetNuke® Community Edition CMS: 06.01.05: Major Highlights Fixed issue that stopped users from creating vocabularies when the portal ID was not zero Fixed issue that caused modules configured to be displayed on all pages to be added to the wrong container in new pages Fixed page quota restriction issue in the Ribbon Bar Removed restriction that would not allow users to use a dash in page names. Now users can create pages with names like "site-map" Fixed issue that was causing the wrong container to be loaded in modules wh...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.3.1: One Click Install from NuGet Changes to Version 2.1.3.11. [assembly: AllowPartiallyTrustedCallers] has been added back into the AssemblyInfo.cs file to prevent failures with other assemblies in Medium trust environments. 2. The Lite data embedded into the assembly has been updated to include devices from December 2011. The 42 new RingMark properties will return Unknown if RingMark data is not available. Changes to Version 2.1.2.11Code Changes 1. The project is now licenced under the Mozilla...MVC Controls Toolkit: Mvc Controls Toolkit 2.0.0: Added Support for Mvc4 beta and WebApi The SafeqQuery and HttpSafeQuery IQueryable implementations that works as wrappers aroung any IQueryable to protect it from unwished queries. "Client Side" pager specialized in paging javascript data coming either from a remote data source, or from local data. LinQ like fluent javascript api to build queries either against remote data sources, or against local javascript data, with exactly the same interface. There are 3 different query objects exp...New ProjectsA C++ Websocket Server For realtime interaction with Web clients.: A websocket protocol layer to the Real Time Server library Push Framework. ABS: Assignment 2 of WDT Due date: 20th May 2012C# Garbage Pump: Password Keylogger Evasion: C# DLL for handling password input that is not susceptible to keylogging through a Garbage Pump technique, which pumps random keys, i.e. garbage, out while the user enters in a password. See screenshots for output results.ChangeTrackingDemo: Change Tracking demo application.CRK: My experimental WebsiteDoAnGame3D: d? án game 3dEyes On Train: The Eyes on Train is the application that can take the picture from multiple cameras and then it can monitor where the mini train it's.FRC Robot Simulator: A robot simulator that uses .NET and XNA technology at its core. Although targeted for FRC simulation, it can THEORETICALLY be used for any WPILib projects.GestorFinanceiro: GestorFinanceiro Exemplo de projeto baseado no padrão: Domain Driven Design. Desenvolvido em c#G-Labs: This project will be used to store "labs" projects from our group.HPCloud API: This project allows developers to work with HP's new Openstack based Storage and Compute infrastructures.indexeddb-feed-reader: Feed reader application using Indexed Database APIIT Trick Repository: This project is the source control for all projects, samples and tutorials posted at mshamkhani.blogspot.comJasLib: General-purpose power toolkit for the .NET Framework on desktop Windows computers.karolocommunicator: mój komunikatorekLan Community: Aplikacja sluzaca do komunikowania sie i monitorowania sieci lokalnej.LastFmReminder: (Work in progress) This Silverlight application uses the Last.fm API to get the names of all the artists you haven't listened to since a specified date. The working application is at http://lastfmreminder.atw.hu/ .linewatchSimple: linewatchSimpleLiuyi.network | Liuyi - [Liuyi.network_8.0] Liuyi.network_2.0 Liuyi.network_1.0: Liuyi.network | Liuyi - Liuyi.network_8.0 Liuyi.network_7.0 Liuyi.network_6.0 Liuyi.network_5.0 Liuyi.network_4.0 Liuyi.network_3.0 Liuyi.network_2.0 Liuyi.network_1.0 liuyi .net C# aspx network liuyi.network liuyi.aspx liuyi.C# liuyi.netMogutaro eats files!: Hobby application using HTML5 and File API. You can drag and drop files into the whale (named Mogutaro) 's mouth. moogle: Moogle is an android application developed using Mono as part of a project for a communications class at IIT. The class, COM 380, dealt with the topic of "Humanizing Technology". The application pseudo (but working) app for managing prescription information. In this way, it is mainly meant as a sample android application developed using .NET. For additional information about this application and group effort that led to its creation, please refer to the documentation of this site.ms2011_win32_tcs: ??????ncontrols: LIbrary of ASP.NET controls that works with NHibernateNetGL: Idea is to create a .Net library allows to use OpenGL in managed code. It is in early state, but shaders are working and no garbage collections occur.Orchard Portlets: Building on the work of the Orchard Widgets module, Orchard Portlets allows users to drag the widgets around the Ui without being in the admin screensProject Detroit: OBD-II Manager: A library to parse OBD-II data coming from a vehicle using an ELM323/327 compatible OBD to USB/serial cable. The solution also includes the WPF Instrument Cluster application that was used in the Project Detroit car!Silverlight 5 MarkupExtensions and Other Utilities: This project contains a replacement for certain WPF functionalities in SL5. Currently contains TypeExtension, StaticExtension, MultiBinding (and IMultiValueConverter), ObjectDataProvider, ArrayExtension Currently under development is an ExpressionParser and related converters.SjASMPlusUnreal: SjASM Plus Unreal at last!Source Code: Source CodeSpecflow Example: Some examples with BDD tool SpecflowSuperSocket ClientEngine: Socket client framework wrapping async data receiving, sending and error handlingTestAppMc: TestAppMcTestBBN: Test ProjectTrabalho News FPU: servidor de serviçosVisual FoxPro Professional 2012: Visual FoxPro Professional is a project to extentd Visual FoxPro editor capabilities. This is based on Scintilla Editor control. websocket-japanese-chalkboard: Multi user chalkboard using WebSocketWholemy.MonolithDBF: Monolith is Data Base Format on Double Tree Node, once Node Header for all data in file, opened direct access in file by offset node. First prototype dated on 2007 year.Zinc: Zinc is a utility library for ASP.NET web forms development. It has support for: - utility methods for working easier with controls - CSV exports - HttpModules for dealing with caching and path based rights. - custom controls This library runs on .NET 2.0 and i would like to kee

    Read the article

< Previous Page | 329 330 331 332 333 334 335 336 337  | Next Page >