Search Results

Search found 8446 results on 338 pages for 'dynamic cast'.

Page 335/338 | < Previous Page | 331 332 333 334 335 336 337 338  | Next Page >

• Get the property, as a string, from an Expression<Func<TModel,TProperty>>

  - by Jaxidian

  I use some strongly-typed expressions that get serialized to allow my UI code to have strongly-typed sorting and searching expressions. These are of type Expression<Func<TModel,TProperty>> and are used as such: SortOption.Field = (p => p.FirstName);. I've gotten this working perfectly for this simple case. The code that I'm using for parsing the "FirstName" property out of there is actually reusing some existing functionality in a third-party product that we use and it works great, until we start working with deeply-nested properties(SortOption.Field = (p => p.Address.State.Abbreviation);). This code has some very different assumptions in the need to support deeply-nested properties. As for what this code does, I don't really understand it and rather than changing that code, I figured I should just write from scratch this functionality. However, I don't know of a good way to do this. I suspect we can do something better than doing a ToString() and performing string parsing. So what's a good way to do this to handle the trivial and deeply-nested cases? Requirements: Given the expression p => p.FirstName I need a string of "FirstName". Given the expression p => p.Address.State.Abbreviation I need a string of "Address.State.Abbreviation" While it's not important for an answer to my question, I suspect my serialization/deserialization code could be useful to somebody else who finds this question in the future, so it is below. Again, this code is not important to the question - I just thought it might help somebody. Note that DynamicExpression.ParseLambda comes from the Dynamic LINQ stuff and Property.PropertyToString() is what this question is about. /// <summary> /// This defines a framework to pass, across serialized tiers, sorting logic to be performed. /// </summary> /// <typeparam name="TModel">This is the object type that you are filtering.</typeparam> /// <typeparam name="TProperty">This is the property on the object that you are filtering.</typeparam> [Serializable] public class SortOption<TModel, TProperty> : ISerializable where TModel : class { /// <summary> /// Convenience constructor. /// </summary> /// <param name="property">The property to sort.</param> /// <param name="isAscending">Indicates if the sorting should be ascending or descending</param> /// <param name="priority">Indicates the sorting priority where 0 is a higher priority than 10.</param> public SortOption(Expression<Func<TModel, TProperty>> property, bool isAscending = true, int priority = 0) { Property = property; IsAscending = isAscending; Priority = priority; } /// <summary> /// Default Constructor. /// </summary> public SortOption() : this(null) { } /// <summary> /// This is the field on the object to filter. /// </summary> public Expression<Func<TModel, TProperty>> Property { get; set; } /// <summary> /// This indicates if the sorting should be ascending or descending. /// </summary> public bool IsAscending { get; set; } /// <summary> /// This indicates the sorting priority where 0 is a higher priority than 10. /// </summary> public int Priority { get; set; } #region Implementation of ISerializable /// <summary> /// This is the constructor called when deserializing a SortOption. /// </summary> protected SortOption(SerializationInfo info, StreamingContext context) { IsAscending = info.GetBoolean("IsAscending"); Priority = info.GetInt32("Priority"); // We just persisted this by the PropertyName. So let's rebuild the Lambda Expression from that. Property = DynamicExpression.ParseLambda<TModel, TProperty>(info.GetString("Property"), default(TModel), default(TProperty)); } /// <summary> /// Populates a <see cref="T:System.Runtime.Serialization.SerializationInfo"/> with the data needed to serialize the target object. /// </summary> /// <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"/> to populate with data. </param> /// <param name="context">The destination (see <see cref="T:System.Runtime.Serialization.StreamingContext"/>) for this serialization. </param> public void GetObjectData(SerializationInfo info, StreamingContext context) { // Just stick the property name in there. We'll rebuild the expression based on that on the other end. info.AddValue("Property", Property.PropertyToString()); info.AddValue("IsAscending", IsAscending); info.AddValue("Priority", Priority); } #endregion }

  Read the article

• VB.NET - using textfile as source for menus and textboxes

  - by Kenny Bones

  Hi, this is probably a bit tense and I'm not sure if this is possible at all. But basically, I'm trying to create a small application which contains alot of PowerShell-code which I want to run in an easy matter. I've managed to create everything myself and it does work. But all of the PowerShell code is manually hardcoded and this gives me a huge disadvantage. What I was thinking was creating some sort of dynamic structure where I can read a couple of text files (possible a numerous amount of text files) and use these as the source for both the comboboxes and the richtextbox which provovides as the string used to run in PowerShell. I was thinking something like this: Combobox - "Choose cmdlet" - Use "menucode.txt" as source Richtextbox - Use "code.txt" as source But, the thing is, Powershell snippets need a few arguments in order for them to work. So I've got a couple of comboboxes and a few textboxes which provides as input for these arguments. And this is done manually as it is right now. So rewriting this small application should also search the textfile for some keywords and have the comboboxes and textboxes to replace those keywords. And I'm not sure how to do this. So, would this requre a whole lot of textfiles? Or could I use one textfile and separate each PowerShell cmdlet snippets with something? Like some sort of a header? Right now, I've got this code at the eventhandler (ComboBox_SelectedIndexChanged) If ComboBoxFunksjon.Text = "Set attribute" Then TxtBoxUsername.Visible = True End If If chkBoxTextfile.Checked = True Then If txtboxBrowse.Text = "" Then MsgBox("You haven't choses a textfile as input for usernames") End If LabelAttribute.Visible = True LabelUsername.Visible = False ComboBoxAttribute.Visible = True TxtBoxUsername.Visible = False txtBoxCode.Text = "$users = Get-Content " & txtboxBrowse.Text & vbCrLf & "foreach ($a in $users)" & vbCrLf & "{" & vbCrLf & "Set-QADUser -Identity $a -ObjectAttributes @{" & ComboBoxAttribute.SelectedItem & "='" & TxtBoxValue.Text & "'}" & vbCrLf & "}" If ComboBoxAttribute.SelectedItem = "Outlook WebAccess" Then TxtBoxValue.Visible = False CheckBoxValue.Visible = True CheckBoxValue.Text = "OWA Enabled?" txtBoxCode.Text = "$users = Get-Content " & txtboxBrowse.Text & vbCrLf & "foreach ($a in $users)" & vbCrLf & "{" & vbCrLf & "Set-CASMailbox -Identity $a -OWAEnabled" & " " & "$" & CheckBoxValue.Checked & " '}" & vbCrLf & "}" End If If ComboBoxAttribute.SelectedItem = "MobileSync" Then TxtBoxValue.Visible = False CheckBoxValue.Visible = True CheckBoxValue.Text = "MobileSync Enabled?" Dim value If CheckBoxValue.Checked = True Then value = "0" Else value = "7" End If txtBoxCode.Text = "$users = Get-Content " & txtboxBrowse.Text & vbCrLf & "foreach ($a in $users)" & vbCrLf & "{" & vbCrLf & "Set-QADUser -Identity $a -ObjectAttributes @{msExchOmaAdminWirelessEnable='" & value & " '}" & vbCrLf & "}" End If Else LabelAttribute.Visible = True LabelUsername.Visible = True ComboBoxAttribute.Visible = True txtBoxCode.Text = "Set-QADUser -Identity " & TxtBoxUsername.Text & " -ObjectAttributes @{" & ComboBoxAttribute.SelectedItem & "='" & TxtBoxValue.Text & " '}" If ComboBoxAttribute.SelectedItem = "Outlook WebAccess" Then TxtBoxValue.Visible = False CheckBoxValue.Visible = True CheckBoxValue.Text = "OWA Enabled?" txtBoxCode.Text = "Set-CASMailbox " & TxtBoxUsername.Text & " -OWAEnabled " & "$" & CheckBoxValue.Checked End If If ComboBoxAttribute.SelectedItem = "MobileSync" Then TxtBoxValue.Visible = False CheckBoxValue.Visible = True CheckBoxValue.Text = "MobileSync Enabled?" Dim value If CheckBoxValue.Checked = True Then value = "0" Else value = "7" End If txtBoxCode.Text = "Set-QADUser " & TxtBoxUsername.Text & " -ObjectAttributes @{msExchOmaAdminWirelessEnable='" & value & "'}" End If End If Now, this snippet above lets me either use a text file as a source for each username used in the powershell snippet. Just so you know :) And I know, this is probably coded as stupidly as it gets. But it does work! :)

  Read the article

• I'd like to know why a function executes fine when called from x but not when called from y

  - by Roland

  When called from archive(), readcont(char *filename) executes fine! Called from runoptions() though, it fails to list the files "archived"! why is this? The program must run in terminal. Use -h as a parameter to view the usage. This program is written to "archive" text files into ".rldzip" files. readcont( char *x) should show the files archived in file (*x) a) Successful call Use the program to archive 3 text files: rldzip.exe a.txt b.txt c.txt FILEXY -a archive() will call readcont and it will work showing the files archived after the binary FILEXY will be created. b) Unsuccessful call After the file is created, use: rldzip.exe FILEXY.rldzip -v You can see that the function crashes! I'd like to know why is this happening! /* Sa se scrie un program care: a) arhiveaza fisiere b) dezarhiveaza fisierele athivate */ #include<stdio.h> #include<stdlib.h> #include<conio.h> #include<string.h> struct content{ char *text; char *flname; }*arc; FILE *f; void readcont(char *x){ FILE *p; if((p = fopen(x, "rb")) == NULL){ perror("Critical error: "); exit(EXIT_FAILURE); } content aux; int i; fread(&i, sizeof(int), 1, p); printf("\nFiles in %s \n\n", x); while(i-- >1 && fread(&aux, sizeof(struct content), 1, p) != 0) printf("%s \n", aux.flname); fclose(p); printf("\n\n"); } void archive(int argc, char **argv){ int i; char inttext[5000], textline[1000]; //Allocate dynamic memory for the content to be archived! arc = (content*)malloc(argc * sizeof(content)); for(i=1; i< argc; i++) { if((f = fopen(argv[i], "r")) == NULL){ printf("%s: ", argv[i]); perror(""); exit(EXIT_FAILURE); } while(!feof(f)){ fgets(textline, 5000, f); strcat(inttext, textline); } arc[i-1].text = (char*)malloc(strlen(inttext) + 1); strcpy(arc[i-1].text, inttext); arc[i-1].flname = (char*)malloc(strlen(argv[i]) + 1); strcpy(arc[i-1].flname, argv[i]); fclose(f); } char *filen; filen=(char*)malloc(strlen(argv[argc])+1+7); strcpy(filen, argv[argc]); strcat(filen, ".rldzip"); f = fopen(filen, "wb"); fwrite(&argc, sizeof(int), 1, f); fwrite(arc, sizeof(content), argc, f); fclose(f); printf("Success! "); for(i=1; i< argc; i++) { (i==argc-1)? printf("and %s ", argv[i]) : printf("%s ", argv[i]); } printf("compressed into %s", filen); readcont(filen); free(filen); } void help(char *v){ printf("\n\n----------------------RLDZIP----------------------\n\nUsage: \n\n Archive n files: \n\n%s $file[1] $file[2] ... $file[n] $output -a\n\nExample:\n%s a.txt b.txt c.txt output -a\n\n\n\nView files:\n\n %s $file.rldzip -v\n\nExample:\n %s fileE.rldzip -v\n\n", v, v, v, v); } void runoptions(int c, char **v){ int i; if(c < 2){ printf("Arguments missing! Use -h for help"); } else{ for(i=0; i<c; i++) if(strcmp(v[i], "-h") == 0){ help(v[0]); exit(2); } for(i=0; i<c; i++) if(strcmp(v[i], "-v") == 0){ if(c != 3){ printf("Arguments misused! Use -h for help"); exit(2); } else { printf("-%s-", v[1]); readcont(v[1]); } } } if(strcmp(v[c-1], "-a") == 0) archive(c-2, v); } main(int argc, char **argv) { runoptions(argc, argv); }

  Read the article

• Multiplying two matrices from two text files with unknown dimensions

  - by wes schwertner

  This is my first post here. I've been working on this c++ question for a while now and have gotten nowhere. Maybe you guys can give me some hints to get me started. My program has to read two .txt files each containing one matrix. Then it has to multiply them and output it to another .txt file. My confusion here though is how the .txt files are setup and how to get the dimensions. Here is an example of matrix 1.txt. #ivalue #jvalue value 1 1 1.0 2 2 1 The dimension of the matrix is 2x2. 1.0 0 0 1 Before I can start multiplying these matrices I need to get the i and j value from the text file. The only way I have found out to do this is int main() { ifstream file("a.txt"); int numcol; float col; for(int x=0; x<3;x++) { file>>col; cout<<col; if(x==1) //grabs the number of columns numcol=col; } cout<<numcol; } The problem is I don't know how to get to the second line to read the number of rows. And on top of that I don't think this will give me accurate results for other matrices files. Let me know if anything is unclear. UPDATE Thanks! I got getline to work correctly. But now I am running into another problem. In matrix B it is setup like: #ivalue #jvalue Value 1 1 0.1 1 2 0.2 2 1 0.3 2 2 0.4 I need to let the program know that it needs to go down 4 lines, maybe even more (The matrices dimensions are unknown. My matrix B example is a 2x2, but it could be a 20x20). I have a while(!file.eof()) loop my program to let it loop until the end of file. I know I need a dynamic array for multiplying, but would I need one here also? #include <iostream> #include <fstream> using namespace std; int main() { ifstream file("a.txt"); //reads matrix A while(!file.eof()) { int temp; int numcol; string numrow; float row; float col; for(int x=0; x<3;x++) { file>>col; if(x==1) { numcol=col; //number of columns } } string test; getline(file, test); //next line to get rows for(int x=0; x<3; x++) { file>>test; if(x==1) { numrow=test; //sets number of rows } } cout<<numrow; cout<<numcol<<endl; } ifstream file1("b.txt"); //reads matrix 2 while(!file1.eof()) { int temp1; int numcol1; string numrow1; float row1; float col1; for(int x=0; x<2;x++) { file1>>col1; if(x==1) numcol1=col1; //sets number of columns } string test1; getline(file1, test1); //In matrix B there are four rows. getline(file1, test1); //These getlines go down a row. getline(file1, test1); //Need help here. for(int x=0; x<2; x++) { file1>>test1; if(x==1) numrow1=test1; } cout<<numrow1; cout<<numcol1<<endl; } }

  Read the article

• Find inner arrays in nested arrays

  - by 50ndr33

  I have a nested array in PHP: array ( '0' => "+5x", '1' => array ( '0' => "+", '1' => "(", '2' => "+3", '3' => array ( '0' => "+", '1' => "(", '2' => array ( // I want to find this one. '0' => "+", '1' => "(", '2' => "+5", '3' => "-3", '4' => ")" ), '3' => "-3", '4' => ")" ), '4' => ")" ) ); I need to process the innermost arrays here, the one with the comment: "I want to find this one." Is there a function for that? I have thought about doing (written as an idea, not as correct PHP): foreach ($array as $id => $value) { if ($value is array) { $name = $id; foreach ($array[$id] as $id_2 => $value_2) { if ($value_2 is array) { $name .= "." . $id_2; foreach ($array[$id][$id_2] as $id_3 => $value_3) { if ($value_3 is array) { $name .= "." . $id_3; foreach ($array[$id][$id_2][$id_3] as $id_4 => $value_4) { if ($value_4 is array) { $name .= "." . $id_4; foreach [and so it goes on]; } else { $listOfInnerArrays[] = $name; break; } } } else { $listOfInnerArrays[] = $name; break; } } } else { $listOfInnerArrays[] = $name; break; } } } } So what it does is it makes $name the current key in the array. If the value is an array, it goes into it with foreach and adds "." and the id of the array. So we would in the example array end up with: array ( '0' => "1.3.2", ) Then I can process those values to access the innner arrays. The problem is that the array that I'm trying to find the inner arrays of is dynamic and made of a user input. (It splits an input string where it finds + or -, and puts it in a separate nested array if it contains brackets. So if the user types a lot of brackets, there will be a lot of nested arrays.) Therefore I need to make this pattern go for 20 times down, and still it will only catch 20 nested arrays no matter what. Is there a function for that, again? Or is there a way to make it do this without my long code? Maybe make a loop make the necessary number of the foreach pattern and run it through eval()? Long answer to J. Bruni: <?php $liste = array ( '0' => "+5x", '1' => array ( '0' => "+", '1' => "(", '2' => "+3", '3' => array ( '0' => "+", '1' => "(", '2' => array ( '0' => "+", '1' => "(", '2' => "+5", '3' => "-3", '4' => ")" ), '3' => "-3", '4' => ")" ), '4' => ")" ) ); function find_deepest( $item, $key ) { echo "0"; if ( !is_array( $item ) ) return false; foreach( $item as $sub_item ) { if ( is_array( $sub_item ) ) return false; } echo "1"; print_r( $item ); return true; } array_walk_recursive( $liste, 'find_deepest' ); echo "<pre>"; print_r($liste); ?> I wrote echo 0 and 1 to see what the script did, and here is the output: 00000000000000 Array ( [0] => +5x [1] => Array ( [0] => + [1] => ( [2] => +3 [3] => Array ( [0] => + [1] => ( [2] => Array ( [0] => + [1] => ( [2] => +5 [3] => -3 [4] => ) ) [3] => -3 [4] => ) ) [4] => ) ) )

  Read the article

• Google App Engine - SiteMap Creation for a social network

  - by spidee

  Hi all. I am creating a social tool - I want to allow search engines to pick up "public" user profiles - like twitter and face-book. I have seen all the protocol info at http://www.sitemaps.org and i understand this and how to build such a file - along with an index if i exceed the 50K limit. Where i am struggling is the concept of how i make this run. The site map for my general site pages is simple i can use a tool to create the file - or a script - host the file - submit the file and done. What i then need is a script that will create the site-maps of user profiles. I assume this would be something like: <?xml version="1.0" encoding="UTF-8"?> <urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9"> <url> <loc>http://www.socialsite.com/profile/spidee</loc> <lastmod>2010-5-12</lastmod> <changefreq>???</changefreq> <priority>???</priority> </url> <url> <loc>http://www.socialsite.com/profile/webbsterisback</loc> <lastmod>2010-5-12</lastmod> <changefreq>???</changefreq> <priority>???</priority> </url> </urlset> Ive added some ??? as i don't know how i should set these settings for my profiles based on the following:- When a new profile is created it must be added to a site-map. If the profile is changed or if "certain" properties are changed - then i don't know if i update the entry in the map - or do something else? (updating would be a nightmare!) Some users may change their profile. In terms of relevance to the search engine the only way a google or yahoo search will find the users (for my requirement) profile would be for example by means of [user name] and [location] so once the entry for the profile has been added to the map file the only reason to have the search-bot re-index the profile would be if the user changed their user-name - which they cant. or their location - and or set their settings so that their profile would be "hidden" from search engines. I assume my map creation will need to be dynamic. From what i have said above i would imagine that creating a new profile and possible editing certain properties could mark it as needing adding/updating in the sitemap. Assuming i will have millions of profiles added/being edited how can i manage this in a sensible manner. i know i need a script that can append urls as each profile is created i know the script will prob be a TASK - running at a set freq - perhaps the profiles have a property like "indexed" and the TASK sets them to "true" when the profiles are added to the map. I dont see the best way to store the map - do i store it in the datastore i.e; model=sitemaps properties key_name=sitemap_xml_1 (and for my map sitemap_index_xml) mapxml=blobstore (the raw xml map or ror map) full=boolean (set true when url count is 50) # might need this as a shard will tell us To make this work my thoughts are m cache the current site map structure as "sitemap_xml" keep a shard of url count when my task executes 1. build the xml structure for say the first 100 urls marked "index==false" (how many could u run at a time?) 2. test if the current mcache sitemap is full (shardcounter+10050K) 3.a if the map is near full create a new map entry in models "sitemap_xml_2" - update the map_index file (also stored in my model as "sitemap_index" start a new shard - or reset.2 3.b if the map is not full grab it from mcache 4.append the 100 url xml structure 5.save / m cache the map I can now add a handler using a url map/route like /sitemaps/* Get my * as map name and serve the maps from the blobstore/mache on the fly. Now my question is does this work - is this the right way or a good way to start? Will this handle the situation of making sure the search bots update when a user changes their profile - possibly by setting the change freq correctly? - Do i need a more advance system :( ? or have i re-invented the wheel! I hope this is all clear and make some form of sense :-)

  Read the article

• passing multiple queries to view with codeigniter

  - by LvS

  I am trying to build a forum with Codeigniter. So far i have the forums themselves displayed and the threads displayed, based on the creating dynamic news tutorial. But that is 2 different pages, i need to obviously display them into one page, like this: Forum 1 - thread 1 - thread 2 - thread 3 Forum 2 - thread 1 - thread 2 etc. And then the next step is obviously to display all the posts in a thread. Most likely with some pagination going on. But that is for later. For now i have the forum controller (slimmed version): <?php class Forum extends CI_Controller { public function __construct() { parent::__construct(); $this->load->model('forum_model'); $this->lang->load('forum'); $this->lang->load('dutch'); } public function index() { $data['forums'] = $this->forum_model->get_forums(); $data['title'] = $this->lang->line('title'); $data['view'] = $this->lang->line('view'); $this->load->view('templates/header', $data); $this->load->view('forum/index', $data); $this->load->view('templates/footer'); } public function view($slug) { $data['forum_item'] = $this->forum_model->get_forums($slug); if (empty($data['forum_item'])) { show_404(); } $data['title'] = $data['forum_item']['title']; $this->load->view('templates/header', $data); $this->load->view('forum/view', $data); $this->load->view('templates/footer'); } } ?> And the forum_model (also slimmed down) <?php class Forum_model extends CI_Model { public function __construct() { $this->load->database(); } public function get_forums($slug = FALSE) { if ($slug === FALSE) { $query= $this->db->get('forum'); return $query->result_array(); } $query = $this->db->get_where('forum', array('slug' => $slug)); return $query->row_array(); } public function get_threads($forumid, $limit, $offset) { $query = $this->db->get_where('thread', array('forumid', $forumid), $limit, $offset); return $query->result_array(); } } ?> And the view file <?php foreach ($forums as $forum_item): ?> <h2><?=$forum_item['title']?></h2> <div id="main"> <?=$forum_item['description']?> </div> <p><a href="forum/<?php echo $forum_item['slug'] ?>"><?=$view?></a></p> <?php endforeach ?> Now that last one, i would like to have something like this: <?php foreach ($forums as $forum_item): ?> <h2><?=$forum_item['title']?></h2> <div id="main"> <?=$forum_item['description']?> </div> <?php foreach ($threads as $thread_item): ?> <h2><?php echo $thread_item['title'] ?></h2> <p><a href="thread/<?php echo $thread_item['slug'] ?>"><?=$view?></a></p> <?php endforeach ?> <?php endforeach ?> But the question is, how do i get the model to return like a double query to the view, so that it contains both the forums and the threads within each forum. I tried to make a foreach loop in the get_forum function, but when i do this: public function get_forums($slug = FALSE) { if ($slug === FALSE) { $query= $this->db->get('forum'); foreach ($query->row_array() as $forum_item) { $thread_query=$this->get_threads($forum_item->forumid, 50, 0); } return $query->result_array(); } $query = $this->db->get_where('forum', array('slug' => $slug)); return $query->row_array(); } i get the error A PHP Error was encountered Severity: Notice Message: Trying to get property of non-object Filename: models/forum_model.php Line Number: 16 I hope anyone has some good tips, thanks! Lenny *EDIT*** Thanks for the feedback. I have been puzzling and this seems to work now :) $query= $this->db->get('forum'); foreach ($query->result() as $forum_item) { $forum[$forum_item->forumid]['title']=$forum_item->title; $thread_query=$this->db->get_where('thread', array('forumid' => $forum_item->forumid), 20, 0); foreach ($thread_query->result() as $thread_item) { $forum[$forum_item->forumid]['thread'][]=$thread_item->title; } } return $forum; } What is now next, is how to display this multidimensional array in the view, with foreach statements.... Any suggestions ? Thanks

  Read the article

• CSS Containers and Framing

  - by CaffeineAddiction

  I am attempting to code a dynamic object for use in an unordered list. I have a mock up of the HTML here: <ul class='Main'> <li class='Node'> <span class='Node_Light'> </span> <span class='Node_Control'> <span class='Ctrl_Name'> <span class='CtrlN_Text'>Random Name</span> <span class='CtrlN_Edit'>[%]</span> </span><br/> <span class='Ctrl_ID'>ff:ff:ff:ff:ff:ff</span><br/> <span class='Ctrl_Buttons'> <span class='CBttn_On'>[%]</span> <span class='CBttn_Off'>[%]</span> <span class='CBttn_Blink'>[%]</span> <span class='CBttn_Config'>[%]</span> <span class='CBttn_Graph'>[%]</span> </span> </span> <span class='Node_Data'> <span class='ND_Sens0'> <span class='Sens_Lable'>temp:</span> <span class='Sens_Data'>72</span> <span class='Sens_Units'>&#176;F</span> </span><br/> <span class='ND_Sens1'> <span class='Sens_Lable'>Sens1:</span> <span class='Sens_Data'>Off</span> <span class='Sens_Units'></span> </span><br/> <span class='ND_Sens2'> <span class='Sens_Lable'>Sens2:</span> <span class='Sens_Data'>Off</span> <span class='Sens_Units'></span> </span><br/> <span class='ND_Sens3'> <span class='Sens_Lable'>Sens3:</span> <span class='Sens_Data'>Off</span> <span class='Sens_Units'></span> </span><br/> <span class='ND_Sens4'> <span class='Sens_Lable'>Sens4:</span> <span class='Sens_Data'>Off</span> <span class='Sens_Units'></span> </span> </span> </li> </ul> and I am attempting to wrangle this HTML into something like: My first problem was that the 3x Outer elements would stack vertically instead of horizontally ... I solved this with the following CSS, but it doesnt feel like the right solution: ul { list-style-type: none; padding:0; margin:0; } .Node { } .Node_Light { height:6em; width:2em; position:absolute; border-style:solid; border-width:1px; } .Node_Control { height:6em; width:15em; position:absolute; left:2.55em; border-style:solid; border-width:1px; } .Node_Data { height:6em; width:6em; position:absolute; left:17.6em; border-style:solid; border-width:1px; } One thought was to use a table, but I dont think that is the correct solution either. Ideas? I would like to have the content dynamically resize on page resize and am not opposed to doing it all via JavaScript, but I have a feeling it would be more efficient to do it via CSS ... I just dont know where to begin.

  Read the article

• Why does this C++ code result in a segmentation fault?

  - by user69514

  I keep getting a segmentation fault when the readAuthor() method is called. Does anybody know why this happens? I am supposed to use dynamic arrays, I know this would be so easy if I was using static array. #include <iostream> #include <string> #include <cstring> #include <cstdlib> using namespace std; /** declare arrays **/ int* isbnArr = new int[25]; char* authorArr = new char[25]; char* publisherArr = new char[25]; char* titleArr = new char[25]; int* editionArr = new int[25]; int* yearArr = new int[25]; int* pagesArr = new int[25]; float* retailPriceArr = new float[25]; float* discountedPriceArr = new float[25]; int* stockArr = new int[25]; /** function prototypes **/ int readIsbn(); char* readAuthor(); char* readPublisher(); char* readTitle(); int readEdition(); int readYear(); int readPages(); float readMsrp(); float readDiscountedPrice(); int readStockAmount(); void readonebook(int* isbn, char* author, char* title, char* publisher, int* edition, int* year, int* pages, float* msrp, float* discounted, int* inventory); int main() { bool stop = false; //flag when to stop loop int ind = 0; //index for current book while( !stop ){ cout << "Add book: press A: "; cout << "another thing here "; char choice; cin >> choice; if( choice == 'a' || choice == 'A' ){ readonebook(&isbnArr[ind], &authorArr[ind], &titleArr[ind], &publisherArr[ind], &editionArr[ind], &yearArr[ind], &pagesArr[ind], &retailPriceArr[ind], &discountedPriceArr[ind], &stockArr[ind]); test(&authorArr[ind]); ind++; } } return 0; } /** define functions **/ int readIsbn(){ int isbn; cout << "ISBN: "; cin >> isbn; return isbn; } char* readAuthor(){ char* author; cout << "Author: "; cin >> author; return author; } char* readPublisher(){ char* publisher = NULL; cout << "Publisher: "; cin >> publisher; return publisher; } char* readTitle(){ char* title = NULL; cout << "Title: "; cin >> title; return title; } int readEdition(){ int edition; cout << "Edition: "; cin >> edition; return edition; } int readYear(){ int year; cout << "Year: "; cin >> year; return year; } int readPages(){ int pages; cout << "Pages: "; cin >> pages; return pages; } float readMsrp(){ float price; cout << "Retail Price: "; cin >> price; return price; } float readDiscountedPrice(){ float price; cout << "Discounted Price: "; cin >> price; return price; } int readStockAmount(){ int amount; cout << "Stock Amount: "; cin >> amount; return amount; } void readonebook(int* isbn, char* author, char* title, char* publisher, int* edition, int* year, int* pages, float* msrp, float* discounted, int* inventory){ *isbn = readIsbn(); author = readAuthor(); title = readTitle(); publisher = readPublisher(); *edition = readEdition(); *year = readYear(); *pages = readPages(); *msrp = readMsrp(); *discounted = readDiscountedPrice(); *inventory = readStockAmount(); }

  Read the article

• How to get data from dynamically created EditText views and insert it into an array?

  - by Snwspeckle

  So basically what I need my program to do at this point is that when I click the submit button, I need to loop through each dynamic row of the ListView and grab the value in the EditText view and then insert that into an array which I will do further calculations after. Here is my code right now. package com.hello_world; import java.util.ArrayList; import com.hello_world.ByteInputActivity.MyAdapter.ViewHolder; import android.app.Activity; import android.content.Context; import android.os.Bundle; import android.util.Log; import android.view.KeyEvent; import android.view.LayoutInflater; import android.view.View; import android.view.View.OnFocusChangeListener; import android.view.View.OnKeyListener; import android.view.ViewGroup; import android.widget.BaseAdapter; import android.widget.Button; import android.widget.EditText; import android.widget.ListView; import android.widget.TextView; public class ByteInputActivity extends Activity { private ListView myList; private MyAdapter myAdapter; private Integer resQuestions; private Integer indexVal = 0; private View caption; ViewHolder holder; ArrayList<Integer> intArrayList = new ArrayList<Integer>(); @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.fieldlist); //Gets number of questions from MainActivity Bundle extras = getIntent().getExtras(); if(extras !=null) { resQuestions = extras.getInt("index"); } myList = (ListView) findViewById(R.id.FieldList); myList.setItemsCanFocus(true); myAdapter = new MyAdapter(); myList.setAdapter(myAdapter); Button submit = (Button) findViewById(R.id.btn_New); submit.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View v) { for (int i = 0; i < myList.getCount() ; i++) { View vListSortOrder; vListSortOrder = myList.getChildAt(i); String temp = holder.caption.getText().toString(); Log.e("VALUES", "" +temp); } } }); } public class MyAdapter extends BaseAdapter { private LayoutInflater mInflater; public ArrayList myItems = new ArrayList(); public MyAdapter() { mInflater = (LayoutInflater) getSystemService(Context.LAYOUT_INFLATER_SERVICE); for (int i = 0; i < resQuestions; i++) { ListItem listItem = new ListItem(); listItem.caption = "Index " + i; listItem.indexText = "Index " + i; myItems.add(listItem); indexVal += 1; } notifyDataSetChanged(); } public int getCount() { return myItems.size(); } public Object getItem(int position) { return position; } public long getItemId(int position) { return position; } public View getView(int position, View convertView, ViewGroup parent) { if (convertView == null) { holder = new ViewHolder(); convertView = mInflater.inflate(R.layout.item, null); holder.indexText = (TextView) convertView .findViewById(R.id.textView1); holder.caption = (EditText) convertView .findViewById(R.id.ItemCaption); convertView.setTag(holder); } else { holder = (ViewHolder) convertView.getTag(); } //Fill EditText with the value you have in data source holder.caption.setText(""); holder.caption.setId(position); holder.indexText.setText("Index " + position); holder.indexText.setId(position); //we need to update adapter once we finish with editing holder.caption.setOnFocusChangeListener(new OnFocusChangeListener() { public void onFocusChange(View v, boolean hasFocus) { if (!hasFocus){ final int position = v.getId(); final EditText Caption = (EditText) v; myItems.set(position, Caption.getText().toString()); } } }); return convertView; } class ViewHolder { EditText caption; TextView indexText; } class ListItem { String caption; String indexText; } } }

  Read the article

• how do i install PHP with JSON and OAuth on Mac Snow Leopard?

  - by meilas

  i want to use the dropbox api via this library http://code.google.com/p/dropbox-php/ i installed MAMP then I tried "sudo pecl install oauth" but I got downloading oauth-1.0.0.tgz ... Starting to download oauth-1.0.0.tgz (42,834 bytes) ............done: 42,834 bytes 6 source files, building running: phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 building in /var/tmp/pear-build-root/oauth-1.0.0 running: /private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth/configure checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for a sed that does not truncate output... /opt/local/bin/gsed checking for cc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking how to run the C preprocessor... cc -E checking for icc... no checking for suncc... no checking whether cc understands -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... i686-apple-darwin10.4.0 checking host system type... i686-apple-darwin10.4.0 checking target system type... i686-apple-darwin10.4.0 checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib checking for PHP extension directory... /usr/lib/php/extensions/no-debug-non-zts-20090626 checking for PHP installed headers prefix... /usr/include/php checking if debug is enabled... no checking if zts is enabled... no checking for re2c... no configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers. checking for gawk... gawk checking for oauth support... yes, shared checking for cURL in default path... found in /usr checking for ld used by cc... /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld... no checking for /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking the maximum length of command line arguments... 196608 checking command to parse /usr/bin/nm output from cc object... rm: conftest.dSYM: is a directory rm: conftest.dSYM: is a directory rm: conftest.dSYM: is a directory rm: conftest.dSYM: is a directory ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip rm: conftest.dSYM: is a directory rm: conftest.dSYM: is a directory checking if cc static flag works... rm: conftest.dSYM: is a directory yes checking if cc supports -fno-rtti -fno-exceptions... rm: conftest.dSYM: is a directory no checking for cc option to produce PIC... -fno-common checking if cc PIC flag -fno-common works... rm: conftest.dSYM: is a directory yes checking if cc supports -c -o file.o... rm: conftest.dSYM: is a directory yes checking whether the cc linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes checking dynamic linker characteristics... darwin10.4.0 dyld checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no creating libtool appending configuration tag "CXX" to libtool configure: creating ./config.status config.status: creating config.h running: make /bin/sh /private/var/tmp/pear-build-root/oauth-1.0.0/libtool --mode=compile cc -I. -I/private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth -DPHP_ATOM_INC -I/private/var/tmp/pear-build-root/oauth-1.0.0/include -I/private/var/tmp/pear-build-root/oauth-1.0.0/main -I/private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -Wall -g -c /private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth/oauth.c -o oauth.lo mkdir .libs cc -I. "-I/private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth" -DPHP_ATOM_INC -I/private/var/tmp/pear-build-root/oauth-1.0.0/include -I/private/var/tmp/pear-build-root/oauth-1.0.0/main "-I/private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth" -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -Wall -g -c "/private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth/oauth.c" -fno-common -DPIC -o .libs/oauth.o In file included from /private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth/php_oauth.h:47, from /private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth/oauth.c:14: /usr/include/php/ext/pcre/php_pcre.h:29:18: error: pcre.h: No such file or directory In file included from /private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth/php_oauth.h:47, from /private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth/oauth.c:14: /usr/include/php/ext/pcre/php_pcre.h:37: error: expected '=', ',', ';', 'asm' or 'attribute' before '*' token /usr/include/php/ext/pcre/php_pcre.h:38: error: expected '=', ',', ';', 'asm' or 'attribute' before '*' token /usr/include/php/ext/pcre/php_pcre.h:44: error: expected specifier-qualifier-list before 'pcre' make: * [oauth.lo] Error 1 ERROR: `make' failed

  Read the article

• SQL Server 08 Express error when connecting to localhost - "Timeout expired". Works with ::1 or 127

  - by Adam A

  EDIT New info: Navigating to localhost:1434 in Chrome gives me an "ERR_EMPTY_RESPONSE", while other ports give me an "Oops! This link appears to be broken". So it seems to binding ok there? So here's my setup so far: I've configured Windows Firewall to allow TCP on 1433 and UDP on 1434. I've set up SQL Server to use any IP on Port 1433 (using the SQL Server Configuration Manager). My hosts file contains the default entries ("127.0.0.1 localhost" and "::1 localhost"). I sometimes have a debug session of Visual Web Developer running a webserver, but it's on a specific port (localhost:5XXXX). What I've tried: I CAN ping localhost in a cmd prompt. I CAN connect to the database through SSMS if I specify 127.0.0.1 or ::1 as the server name. I CAN'T connect to the database through SSMS (or ADO.NET) if I specify localhost as the server name. I've tried both Windows and SQL Authentication The error I get is the standard Can't connect to localhost. Additional Information -- Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft Sql Server) Other considerations: Stopping the Visual Web Developer web server from the taskbar doesn't affect the sql problem. The SQL error log says that it's listening on some piped name url at start up (I don't see how this would affect localhost but not 127.0.0.1 though). I could probably just use 127.0.0.1 everywhere, but it scares me that localhost isn't working and I'd like to figure out why. I'm not much of a networking or sql server guy so I'm stuck. If you want me to try anything to help diagnose just put it in a comment and I'll give it a go. Netstat results: Setting SDK environment relative to C:\Program Files\Microsoft SDKs\Windows\v6.1 Targeting Windows Server 2008 x86 DEBUG C:\Program Files\Microsoft SDKs\Windows\v6.1netstat -ano | findstr 1434 UDP 0.0.0.0:1434 *:* 6868 UDP [::]:1434 *:* 6868 C:\Program Files\Microsoft SDKs\Windows\v6.1netstat -ano | findstr 1433 TCP 0.0.0.0:1433 0.0.0.0:0 LISTENING 2268 TCP 127.0.0.1:1433 127.0.0.1:50758 ESTABLISHED 2268 TCP 127.0.0.1:50758 127.0.0.1:1433 ESTABLISHED 5008 TCP [::]:1433 [::]:0 LISTENING 2268 TCP [::1]:1433 [::1]:51202 ESTABLISHED 2268 TCP [::1]:1433 [::1]:51616 ESTABLISHED 2268 TCP [::1]:51202 [::1]:1433 ESTABLISHED 5008 TCP [::1]:51616 [::1]:1433 ESTABLISHED 5008 C:\Program Files\Microsoft SDKs\Windows\v6.1 SQL Server Log File: In case it helps 2010-01-30 12:58:59.01 Server Microsoft SQL Server 2008 (SP1) - 10.0.2531.0 (Intel X86) Mar 29 2009 10:27:29 Copyright (c) 1988-2008 Microsoft Corporation Express Edition on Windows NT 6.0 (Build 6002: Service Pack 2) 2010-01-30 12:58:59.01 Server (c) 2005 Microsoft Corporation. 2010-01-30 12:58:59.01 Server All rights reserved. 2010-01-30 12:58:59.01 Server Server process ID is 2268. 2010-01-30 12:58:59.01 Server System Manufacturer: 'Dell Inc.', System Model: 'Inspiron 1545'. 2010-01-30 12:58:59.01 Server Authentication mode is MIXED. 2010-01-30 12:58:59.02 Server Logging SQL Server messages in file 'c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG'. 2010-01-30 12:58:59.02 Server This instance of SQL Server last reported using a process ID of 7396 at 1/30/2010 12:57:38 PM (local) 1/30/2010 5:57:38 PM (UTC). This is an informational message only; no user action is required. 2010-01-30 12:58:59.02 Server Registry startup parameters: -d c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\master.mdf -e c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG -l c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\mastlog.ldf 2010-01-30 12:58:59.02 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required. 2010-01-30 12:58:59.02 Server Detected 2 CPUs. This is an informational message; no user action is required. 2010-01-30 12:58:59.08 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required. 2010-01-30 12:58:59.17 Server Node configuration: node 0: CPU mask: 0x00000003 Active CPU mask: 0x00000003. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required. 2010-01-30 12:58:59.30 spid7s Starting up database 'master'. 2010-01-30 12:58:59.41 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required. 2010-01-30 12:58:59.67 spid7s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'SQLEXPRESS'. 2010-01-30 12:58:59.92 spid7s SQL Trace ID 1 was started by login "sa". 2010-01-30 12:58:59.94 spid7s Starting up database 'mssqlsystemresource'. 2010-01-30 12:58:59.95 spid7s The resource database build version is 10.00.2531. This is an informational message only. No user action is required. 2010-01-30 12:59:00.82 spid7s Server name is 'DELL\SQLEXPRESS'. This is an informational message only. No user action is required. 2010-01-30 12:59:00.83 Server A self-generated certificate was successfully loaded for encryption. 2010-01-30 12:59:00.84 Server Server is listening on [ 'any' 1433]. 2010-01-30 12:59:00.84 Server Server is listening on [ 'any' 1433]. 2010-01-30 12:59:00.84 spid10s Starting up database 'model'. 2010-01-30 12:59:00.85 Server Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SQLEXPRESS ]. 2010-01-30 12:59:00.86 Server Server local connection provider is ready to accept connection on [ \\.\pipe\MSSQL$SQLEXPRESS\sql\query ]. 2010-01-30 12:59:00.86 Server Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806. This is an informational message only. No user action is required. 2010-01-30 12:59:00.87 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b, state: 3. Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies. 2010-01-30 12:59:00.87 spid7s Informational: No full-text supported languages found. 2010-01-30 12:59:00.87 Server SQL Server is now ready for client connections. This is an informational message; no user action is required. 2010-01-30 12:59:00.91 spid7s Starting up database 'msdb'. 2010-01-30 12:59:01.21 spid10s Clearing tempdb database. 2010-01-30 12:59:02.78 spid10s Starting up database 'tempdb'. 2010-01-30 12:59:03.30 spid13s The Service Broker protocol transport is disabled or not configured. 2010-01-30 12:59:03.30 spid13s The Database Mirroring protocol transport is disabled or not configured. 2010-01-30 12:59:03.31 spid7s Recovery is complete. This is an informational message only. No user action is required. 2010-01-30 12:59:03.31 spid13s Service Broker manager has started.

  Read the article

• SQL Server 08 Express error when connecting to localhost - "Timeout expired". Works with ::1 or 127.0.0.1

  - by Adam A

  EDIT New info: Navigating to localhost:1434 in Chrome gives me an "ERR_EMPTY_RESPONSE", while other ports give me an "Oops! This link appears to be broken". So it seems to binding ok there? So here's my setup so far: I've configured Windows Firewall to allow TCP on 1433 and UDP on 1434. I've set up SQL Server to use any IP on Port 1433 (using the SQL Server Configuration Manager). My hosts file contains the default entries ("127.0.0.1 localhost" and "::1 localhost"). I sometimes have a debug session of Visual Web Developer running a webserver, but it's on a specific port (localhost:5XXXX). What I've tried: I CAN ping localhost in a cmd prompt. I CAN connect to the database through SSMS if I specify 127.0.0.1 or ::1 as the server name. I CAN'T connect to the database through SSMS (or ADO.NET) if I specify localhost as the server name. I've tried both Windows and SQL Authentication The error I get is the standard Can't connect to localhost. Additional Information -- Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft Sql Server) Other considerations: Stopping the Visual Web Developer web server from the taskbar doesn't affect the sql problem. The SQL error log says that it's listening on some piped name url at start up (I don't see how this would affect localhost but not 127.0.0.1 though). I could probably just use 127.0.0.1 everywhere, but it scares me that localhost isn't working and I'd like to figure out why. I'm not much of a networking or sql server guy so I'm stuck. If you want me to try anything to help diagnose just put it in a comment and I'll give it a go. Netstat results: Setting SDK environment relative to C:\Program Files\Microsoft SDKs\Windows\v6.1 Targeting Windows Server 2008 x86 DEBUG C:\Program Files\Microsoft SDKs\Windows\v6.1netstat -ano | findstr 1434 UDP 0.0.0.0:1434 *:* 6868 UDP [::]:1434 *:* 6868 C:\Program Files\Microsoft SDKs\Windows\v6.1netstat -ano | findstr 1433 TCP 0.0.0.0:1433 0.0.0.0:0 LISTENING 2268 TCP 127.0.0.1:1433 127.0.0.1:50758 ESTABLISHED 2268 TCP 127.0.0.1:50758 127.0.0.1:1433 ESTABLISHED 5008 TCP [::]:1433 [::]:0 LISTENING 2268 TCP [::1]:1433 [::1]:51202 ESTABLISHED 2268 TCP [::1]:1433 [::1]:51616 ESTABLISHED 2268 TCP [::1]:51202 [::1]:1433 ESTABLISHED 5008 TCP [::1]:51616 [::1]:1433 ESTABLISHED 5008 C:\Program Files\Microsoft SDKs\Windows\v6.1 SQL Server Log File: In case it helps 2010-01-30 12:58:59.01 Server Microsoft SQL Server 2008 (SP1) - 10.0.2531.0 (Intel X86) Mar 29 2009 10:27:29 Copyright (c) 1988-2008 Microsoft Corporation Express Edition on Windows NT 6.0 (Build 6002: Service Pack 2) 2010-01-30 12:58:59.01 Server (c) 2005 Microsoft Corporation. 2010-01-30 12:58:59.01 Server All rights reserved. 2010-01-30 12:58:59.01 Server Server process ID is 2268. 2010-01-30 12:58:59.01 Server System Manufacturer: 'Dell Inc.', System Model: 'Inspiron 1545'. 2010-01-30 12:58:59.01 Server Authentication mode is MIXED. 2010-01-30 12:58:59.02 Server Logging SQL Server messages in file 'c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG'. 2010-01-30 12:58:59.02 Server This instance of SQL Server last reported using a process ID of 7396 at 1/30/2010 12:57:38 PM (local) 1/30/2010 5:57:38 PM (UTC). This is an informational message only; no user action is required. 2010-01-30 12:58:59.02 Server Registry startup parameters: -d c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\master.mdf -e c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG -l c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\mastlog.ldf 2010-01-30 12:58:59.02 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required. 2010-01-30 12:58:59.02 Server Detected 2 CPUs. This is an informational message; no user action is required. 2010-01-30 12:58:59.08 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required. 2010-01-30 12:58:59.17 Server Node configuration: node 0: CPU mask: 0x00000003 Active CPU mask: 0x00000003. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required. 2010-01-30 12:58:59.30 spid7s Starting up database 'master'. 2010-01-30 12:58:59.41 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required. 2010-01-30 12:58:59.67 spid7s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'SQLEXPRESS'. 2010-01-30 12:58:59.92 spid7s SQL Trace ID 1 was started by login "sa". 2010-01-30 12:58:59.94 spid7s Starting up database 'mssqlsystemresource'. 2010-01-30 12:58:59.95 spid7s The resource database build version is 10.00.2531. This is an informational message only. No user action is required. 2010-01-30 12:59:00.82 spid7s Server name is 'DELL\SQLEXPRESS'. This is an informational message only. No user action is required. 2010-01-30 12:59:00.83 Server A self-generated certificate was successfully loaded for encryption. 2010-01-30 12:59:00.84 Server Server is listening on [ 'any' 1433]. 2010-01-30 12:59:00.84 Server Server is listening on [ 'any' 1433]. 2010-01-30 12:59:00.84 spid10s Starting up database 'model'. 2010-01-30 12:59:00.85 Server Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SQLEXPRESS ]. 2010-01-30 12:59:00.86 Server Server local connection provider is ready to accept connection on [ \\.\pipe\MSSQL$SQLEXPRESS\sql\query ]. 2010-01-30 12:59:00.86 Server Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806. This is an informational message only. No user action is required. 2010-01-30 12:59:00.87 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b, state: 3. Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies. 2010-01-30 12:59:00.87 spid7s Informational: No full-text supported languages found. 2010-01-30 12:59:00.87 Server SQL Server is now ready for client connections. This is an informational message; no user action is required. 2010-01-30 12:59:00.91 spid7s Starting up database 'msdb'. 2010-01-30 12:59:01.21 spid10s Clearing tempdb database. 2010-01-30 12:59:02.78 spid10s Starting up database 'tempdb'. 2010-01-30 12:59:03.30 spid13s The Service Broker protocol transport is disabled or not configured. 2010-01-30 12:59:03.30 spid13s The Database Mirroring protocol transport is disabled or not configured. 2010-01-30 12:59:03.31 spid7s Recovery is complete. This is an informational message only. No user action is required. 2010-01-30 12:59:03.31 spid13s Service Broker manager has started.

  Read the article

• How do I install PHP with JSON and OAuth on Mac Snow Leopard?

  - by meilas

  I want to use the Dropbox API via this library, http://code.google.com/p/dropbox-php/. I installed MAMP, and then I tried sudo pecl install oauth but I got the following. >>>> downloading oauth-1.0.0.tgz ... Starting to download oauth-1.0.0.tgz (42,834 bytes) ............done: 42,834 bytes 6 source files, building running: phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 building in /var/tmp/pear-build-root/oauth-1.0.0 running: /private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth/configure checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for a sed that does not truncate output... /opt/local/bin/gsed checking for cc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking how to run the C preprocessor... cc -E checking for icc... no checking for suncc... no checking whether cc understands -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... i686-apple-darwin10.4.0 checking host system type... i686-apple-darwin10.4.0 checking target system type... i686-apple-darwin10.4.0 checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib checking for PHP extension directory... /usr/lib/php/extensions/no-debug-non-zts-20090626 checking for PHP installed headers prefix... /usr/include/php checking if debug is enabled... no checking if zts is enabled... no checking for re2c... no configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers. checking for gawk... gawk checking for oauth support... yes, shared checking for cURL in default path... found in /usr checking for ld used by cc... /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld... no checking for /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking the maximum length of command line arguments... 196608 checking command to parse /usr/bin/nm output from cc object... rm: conftest.dSYM: is a directory rm: conftest.dSYM: is a directory rm: conftest.dSYM: is a directory rm: conftest.dSYM: is a directory ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip rm: conftest.dSYM: is a directory rm: conftest.dSYM: is a directory checking if cc static flag works... rm: conftest.dSYM: is a directory yes checking if cc supports -fno-rtti -fno-exceptions... rm: conftest.dSYM: is a directory no checking for cc option to produce PIC... -fno-common checking if cc PIC flag -fno-common works... rm: conftest.dSYM: is a directory yes checking if cc supports -c -o file.o... rm: conftest.dSYM: is a directory yes checking whether the cc linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes checking dynamic linker characteristics... darwin10.4.0 dyld checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no >>>> creating libtool appending configuration tag "CXX" to libtool configure: creating ./config.status config.status: creating config.h running: make /bin/sh /private/var/tmp/pear-build-root/oauth-1.0.0/libtool --mode=compile cc -I. -I/private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth -DPHP_ATOM_INC -I/private/var/tmp/pear-build-root/oauth-1.0.0/include -I/private/var/tmp/pear-build-root/oauth-1.0.0/main -I/private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -Wall -g -c /private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth/oauth.c -o oauth.lo mkdir .libs cc -I. "-I/private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth" -DPHP_ATOM_INC -I/private/var/tmp/pear-build-root/oauth-1.0.0/include -I/private/var/tmp/pear-build-root/oauth-1.0.0/main "-I/private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth" -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -Wall -g -c "/private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth/oauth.c" -fno-common -DPIC -o .libs/oauth.o In file included from /private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth/php_oauth.h:47, from /private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth/oauth.c:14: /usr/include/php/ext/pcre/php_pcre.h:29:18: error: pcre.h: No such file or directory In file included from /private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth/php_oauth.h:47, from /private/var/tmp/apache_mod_php/apache_mod_php-53~1/Build/tmp/pear/temp/oauth/oauth.c:14: /usr/include/php/ext/pcre/php_pcre.h:37: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token /usr/include/php/ext/pcre/php_pcre.h:38: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token /usr/include/php/ext/pcre/php_pcre.h:44: error: expected specifier-qualifier-list before 'pcre' make: *** [oauth.lo] Error 1 ERROR: `make' failed </block>

  Read the article

• Need help in setting lighttpd on Ubuntu 9.10

  - by hap497

  Hi, I am trying to run lighttpd on Ubuntu 9.10. I get the conf file from the doc directory of lighttpd source. $ sudo ./lighttpd -f lighttpd.conf $ ps -ef | grep lighttpd root 2094 1 0 19:40 ? 00:00:00 ./lighttpd -f lighttpd.conf This is my lighttpd.conf: $ more lighttpd.conf # lighttpd configuration file # # use it as a base for lighttpd 1.0.0 and above # # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $ ############ Options you really have to take care of #################### ## modules to load # at least mod_access and mod_accesslog should be loaded # all other module should only be loaded if really neccesary # - saves some time # - saves memory server.modules = ( # "mod_rewrite", # "mod_redirect", # "mod_alias", "mod_access", # "mod_trigger_b4_dl", # "mod_auth", # "mod_status", # "mod_setenv", # "mod_fastcgi", # "mod_proxy", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) ## A static document-root. For virtual hosting take a look at the ## mod_simple_vhost module. server.document-root = "/srv/www/htdocs/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" # files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm" ) ## set the event-handler (read the performance section in the manual) # server.event-handler = "freebsd-kqueue" # needed on OS X # mimetype mapping mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "application/ogg", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jar" => "application/x-java-archive", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".cpp" => "text/plain", ".log" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar", # default mime type "" => "application/octet-stream", ) # Use the "Content-Type" extended attribute to obtain mime type if possible #mimetype.use-xattr = "enable" ## send a different Server: header ## be nice and keep it at lighttpd # server.tag = "lighttpd" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ######### Options that are good to be but not neccesary to be changed ####### ## bind to port (default: 80) #server.port = 81 ## bind to localhost (default: all interfaces) #server.bind = "127.0.0.1" ## error-handler for status 404 #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## to help the rc.scripts #server.pid-file = "/var/run/lighttpd.pid" ###### virtual hosts ## ## If you want name-based virtual hosting add the next three settings and load ## mod_simple_vhost ## ## document-root = ## virtual-server-root + virtual-server-default-host + virtual-server-docroot ## or ## virtual-server-root + http-host + virtual-server-docroot ## #simple-vhost.server-root = "/srv/www/vhosts/" #simple-vhost.default-host = "www.example.org" #simple-vhost.document-root = "/htdocs/" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-" #server.errorfile-prefix = "/srv/www/errors/status-" ## virtual directory listings #dir-listing.activate = "enable" ## select encoding for directory listings #dir-listing.encoding = "utf-8" ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" #debug.log-file-not-found = "enable" ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot = "/" ## change uid to <uid> (default: don't care) #server.username = "wwwrun" ## change uid to <uid> (default: don't care) #server.groupname = "wwwrun" #### compress module #compress.cache-dir = "/var/cache/lighttpd/compress/" #compress.filetype = ("text/plain", "text/html") #### proxy module ## read proxy.txt for more info #proxy.server = ( ".php" => # ( "localhost" => # ( # "host" => "192.168.0.101", # "port" => 80 # ) # ) # ) #### fastcgi module ## read fastcgi.txt for more info ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini #fastcgi.server = ( ".php" => # ( "localhost" => # ( # "socket" => "/var/run/lighttpd/php-fastcgi.s ocket", # "bin-path" => "/usr/local/bin/php-cgi" # ) # ) # ) #### CGI module #cgi.assign = ( ".pl" => "/usr/bin/perl", # ".cgi" => "/usr/bin/perl" ) # #### SSL engine #ssl.engine = "enable" #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" #### status module #status.status-url = "/server-status" #status.config-url = "/server-config" #### auth module ## read authentication.txt for more info #auth.backend = "plain" #auth.backend.plain.userfile = "lighttpd.user" #auth.backend.plain.groupfile = "lighttpd.group" #auth.backend.ldap.hostname = "localhost" #auth.backend.ldap.base-dn = "dc=my-domain,dc=com" #auth.backend.ldap.filter = "(uid=$)" #auth.require = ( "/server-status" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "user=jan" # ), # "/server-config" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "valid-user" # ) # ) #### url handling modules (rewrite, redirect, access) #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### both rewrite/redirect support back reference to regex conditional using %n #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} # # define a pattern for the host url finding # %% => % sign # %0 => domain name + tld # %1 => tld # %2 => domain name without tld # %3 => subdomain 1 name # %4 => subdomain 2 name # #evhost.path-pattern = "/srv/www/vhosts/%3/htdocs/" #### expire module #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "ac cess plus 1 seconds 2 minutes") #### ssi #ssi.extension = ( ".shtml" ) #### rrdtool #rrdtool.binary = "/usr/bin/rrdtool" #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd" #### setenv #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" ) #setenv.add-response-header = ( "X-Secret-Message" => "42" ) ## for mod_trigger_b4_dl # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db" # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) # trigger-before-download.trigger-url = "^/trigger/" # trigger-before-download.download-url = "^/download/" # trigger-before-download.deny-url = "http://127.0.0.1/index.html" # trigger-before-download.trigger-timeout = 10 #### variable usage: ## variable name without "." is auto prefixed by "var." and becomes "var.bar" #bar = 1 #var.mystring = "foo" ## integer add #bar += 1 ## string concat, with integer cast as string, result: "www.foo1.com" #server.name = "www." + mystring + var.bar + ".com" ## array merge #index-file.names = (foo + ".php") + index-file.names #index-file.names += (foo + ".php") #### include #include /etc/lighttpd/lighttpd-inc.conf ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf" #include "lighttpd-inc.conf" #### include_shell #include_shell "echo var.a=1" ## the above is same as: #var.a=1 When I go to browser and hit 'http://127.0.0.1', I get link not found. Any idea?

  Read the article

• How to configure fastcgi to work with ligttpd in ubuntu

  - by michael

  I am able to run lighttpd on ubuntu 9.10. But when i tried to setup fastcgi with lighttpd by putting this in the ligttpd.conf file: #### fastcgi module fastcgi.server = ( "/fastcgi_scripts/" => (( "host" => "127.0.0.1", "port" => "9098", "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", "docroot" => "/" # remote server may use # it's own docroot )) ) This is what I get in the error.log in ligttpd: 2010-03-07 21:00:11: (log.c.166) server started 2010-03-07 21:00:11: (mod_fastcgi.c.1104) the fastcgi-backend /usr/local/bin/cgi-fcgi failed to start: 2010-03-07 21:00:11: (mod_fastcgi.c.1108) child exited with status 1 /usr/local/bin/cgi-fcgi 2010-03-07 21:00:11: (mod_fastcgi.c.1111) If you're trying to run your app as a FastCGI backend, make sure you're using the FastCGI-enabled version. If this is PHP on Gentoo, add 'fastcgi' to the USE flags. 2010-03-07 21:00:11: (mod_fastcgi.c.1399) [ERROR]: spawning fcgi failed. 2010-03-07 21:00:11: (server.c.931) Configuration of plugins failed. Going down. I do have cgi-fcgi in /usr/local/bin: $ which cgi-fcgi /usr/local/bin/cgi-fcgi '/usr/local/bin/cgi-fcgi' is the executable after I download and compile fast-cgi. Here is my lighttpd conf file: $ more lighttpd.conf # lighttpd configuration file # # use it as a base for lighttpd 1.0.0 and above # # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $ ############ Options you really have to take care of #################### ## modules to load # at least mod_access and mod_accesslog should be loaded # all other module should only be loaded if really neccesary # - saves some time # - saves memory server.modules = ( # "mod_rewrite", # "mod_redirect", # "mod_alias", "mod_access", # "mod_trigger_b4_dl", # "mod_auth", # "mod_status", # "mod_setenv", "mod_fastcgi", # "mod_proxy", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) ## A static document-root. For virtual hosting take a look at the ## mod_simple_vhost module. server.document-root = "/srv/www/htdocs/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" # files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm" ) ## set the event-handler (read the performance section in the manual) # server.event-handler = "freebsd-kqueue" # needed on OS X # mimetype mapping mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "application/ogg", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jar" => "application/x-java-archive", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".cpp" => "text/plain", ".log" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar", # default mime type "" => "application/octet-stream", ) # Use the "Content-Type" extended attribute to obtain mime type if possible #mimetype.use-xattr = "enable" ## send a different Server: header ## be nice and keep it at lighttpd # server.tag = "lighttpd" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ######### Options that are good to be but not neccesary to be changed ####### ## bind to port (default: 80) server.port = 9090 ## bind to localhost (default: all interfaces) server.bind = "127.0.0.1" ## error-handler for status 404 #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## to help the rc.scripts #server.pid-file = "/var/run/lighttpd.pid" ###### virtual hosts ## ## If you want name-based virtual hosting add the next three settings and load ## mod_simple_vhost ## ## document-root = ## virtual-server-root + virtual-server-default-host + virtual-server-docroot ## or ## virtual-server-root + http-host + virtual-server-docroot ## #simple-vhost.server-root = "/srv/www/vhosts/" #simple-vhost.default-host = "www.example.org" #simple-vhost.document-root = "/htdocs/" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-" #server.errorfile-prefix = "/srv/www/errors/status-" ## virtual directory listings #dir-listing.activate = "enable" ## select encoding for directory listings #dir-listing.encoding = "utf-8" ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" #debug.log-file-not-found = "enable" ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot = "/" ## change uid to <uid> (default: don't care) #server.username = "wwwrun" ## change uid to <uid> (default: don't care) #server.groupname = "wwwrun" #### compress module #compress.cache-dir = "/var/cache/lighttpd/compress/" #compress.filetype = ("text/plain", "text/html") #### proxy module ## read proxy.txt for more info #proxy.server = ( ".php" => # ( "localhost" => # ( # "host" => "192.168.0.101", # "port" => 80 # ) # ) # ) #### fastcgi module fastcgi.server = ( "/fastcgi_scripts/" => (( "host" => "127.0.0.1", "port" => 1026, "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", #"docroot" => "/" # remote server may use # it's own docroot )) ) ## read fastcgi.txt for more info ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini #fastcgi.server = ( ".php" => # ( "localhost" => # ( # "socket" => "/var/run/lighttpd/php-fastcgi.s ocket", # "bin-path" => "/usr/local/bin/php-cgi" # ) # ) # ) #### CGI module #cgi.assign = ( ".pl" => "/usr/bin/perl", # ".cgi" => "/usr/bin/perl" ) # #### SSL engine #ssl.engine = "enable" #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" #### status module #status.status-url = "/server-status" #status.config-url = "/server-config" #### auth module ## read authentication.txt for more info #auth.backend = "plain" #auth.backend.plain.userfile = "lighttpd.user" #auth.backend.plain.groupfile = "lighttpd.group" #auth.backend.ldap.hostname = "localhost" #auth.backend.ldap.base-dn = "dc=my-domain,dc=com" #auth.backend.ldap.filter = "(uid=$)" #auth.require = ( "/server-status" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "user=jan" # ), # "/server-config" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "valid-user" # ) # ) #### url handling modules (rewrite, redirect, access) #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### both rewrite/redirect support back reference to regex conditional using %n #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} # # define a pattern for the host url finding # %% => % sign # %0 => domain name + tld # %1 => tld # %2 => domain name without tld # %3 => subdomain 1 name # %4 => subdomain 2 name # #evhost.path-pattern = "/srv/www/vhosts/%3/htdocs/" #### expire module #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "ac cess plus 1 seconds 2 minutes") #### ssi #ssi.extension = ( ".shtml" ) #### rrdtool #rrdtool.binary = "/usr/bin/rrdtool" #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd" #### setenv #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" ) #setenv.add-response-header = ( "X-Secret-Message" => "42" ) ## for mod_trigger_b4_dl # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db" # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) # trigger-before-download.trigger-url = "^/trigger/" # trigger-before-download.download-url = "^/download/" # trigger-before-download.deny-url = "http://127.0.0.1/index.html" # trigger-before-download.trigger-timeout = 10 #### variable usage: ## variable name without "." is auto prefixed by "var." and becomes "var.bar" #bar = 1 #var.mystring = "foo" ## integer add #bar += 1 ## string concat, with integer cast as string, result: "www.foo1.com" #server.name = "www." + mystring + var.bar + ".com" ## array merge #index-file.names = (foo + ".php") + index-file.names #index-file.names += (foo + ".php") #### include #include /etc/lighttpd/lighttpd-inc.conf ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf" #include "lighttpd-inc.conf" #### include_shell #include_shell "echo var.a=1" ## the above is same as: #var.a=1 Thank you for your help.

  Read the article

• ServerRoot in my lighttpd.conf

  - by michael

  Hi, I have use the following example lighttpd.conf to launch my lighttpd. Can you please tell me where is my 'ServerRoot'? # lighttpd configuration file # # use it as a base for lighttpd 1.0.0 and above # # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $ ############ Options you really have to take care of #################### ## modules to load # at least mod_access and mod_accesslog should be loaded # all other module should only be loaded if really neccesary # - saves some time # - saves memory server.modules = ( # "mod_rewrite", # "mod_redirect", # "mod_alias", "mod_access", # "mod_trigger_b4_dl", # "mod_auth", # "mod_status", # "mod_setenv", "mod_fastcgi", # "mod_proxy", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) ## A static document-root. For virtual hosting take a look at the ## mod_simple_vhost module. server.document-root = "/srv/www/htdocs/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" # files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm" ) ## set the event-handler (read the performance section in the manual) # server.event-handler = "freebsd-kqueue" # needed on OS X # mimetype mapping mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "application/ogg", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jar" => "application/x-java-archive", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".cpp" => "text/plain", ".log" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar", # default mime type "" => "application/octet-stream", ) # Use the "Content-Type" extended attribute to obtain mime type if possible #mimetype.use-xattr = "enable" ## send a different Server: header ## be nice and keep it at lighttpd # server.tag = "lighttpd" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ######### Options that are good to be but not neccesary to be changed ####### ## bind to port (default: 80) server.port = 9090 ## bind to localhost (default: all interfaces) server.bind = "127.0.0.1" ## error-handler for status 404 #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## to help the rc.scripts #server.pid-file = "/var/run/lighttpd.pid" ###### virtual hosts ## ## If you want name-based virtual hosting add the next three settings and load ## mod_simple_vhost ## ## document-root = ## virtual-server-root + virtual-server-default-host + virtual-server-docroot ## or ## virtual-server-root + http-host + virtual-server-docroot ## #simple-vhost.server-root = "/srv/www/vhosts/" #simple-vhost.default-host = "www.example.org" #simple-vhost.document-root = "/htdocs/" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-" #server.errorfile-prefix = "/srv/www/errors/status-" ## virtual directory listings #dir-listing.activate = "enable" ## select encoding for directory listings #dir-listing.encoding = "utf-8" ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" #debug.log-file-not-found = "enable" ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot = "/" ## change uid to <uid> (default: don't care) #server.username = "wwwrun" ## change uid to <uid> (default: don't care) #server.groupname = "wwwrun" #### compress module #compress.cache-dir = "/var/cache/lighttpd/compress/" #compress.filetype = ("text/plain", "text/html") #### proxy module ## read proxy.txt for more info #proxy.server = ( ".php" => # ( "localhost" => # ( # "host" => "192.168.0.101", # "port" => 80 # ) # ) # ) #### fastcgi module fastcgi.server = ( "/fastcgi_scripts/" => (( "host" => "127.0.0.1", "port" => 1026, "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", #"docroot" => "/" # remote server may use # it's own docroot )) ) ## read fastcgi.txt for more info ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini #fastcgi.server = ( ".php" => # ( "localhost" => # ( # "socket" => "/var/run/lighttpd/php-fastcgi.socket", # "bin-path" => "/usr/local/bin/php-cgi" # ) # ) # ) #### CGI module #cgi.assign = ( ".pl" => "/usr/bin/perl", # ".cgi" => "/usr/bin/perl" ) # #### SSL engine #ssl.engine = "enable" #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" #### status module #status.status-url = "/server-status" #status.config-url = "/server-config" #### auth module ## read authentication.txt for more info #auth.backend = "plain" #auth.backend.plain.userfile = "lighttpd.user" #auth.backend.plain.groupfile = "lighttpd.group" #auth.backend.ldap.hostname = "localhost" #auth.backend.ldap.base-dn = "dc=my-domain,dc=com" #auth.backend.ldap.filter = "(uid=$)" #auth.require = ( "/server-status" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "user=jan" # ), # "/server-config" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "valid-user" # ) # ) #### url handling modules (rewrite, redirect, access) #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### both rewrite/redirect support back reference to regex conditional using %n #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} # # define a pattern for the host url finding # %% => % sign # %0 => domain name + tld # %1 => tld # %2 => domain name without tld # %3 => subdomain 1 name # %4 => subdomain 2 name # #evhost.path-pattern = "/srv/www/vhosts/%3/htdocs/" #### expire module #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes") #### ssi #ssi.extension = ( ".shtml" ) #### rrdtool #rrdtool.binary = "/usr/bin/rrdtool" #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd" #### setenv #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" ) #setenv.add-response-header = ( "X-Secret-Message" => "42" ) ## for mod_trigger_b4_dl # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db" # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) # trigger-before-download.trigger-url = "^/trigger/" # trigger-before-download.download-url = "^/download/" # trigger-before-download.deny-url = "http://127.0.0.1/index.html" # trigger-before-download.trigger-timeout = 10 #### variable usage: ## variable name without "." is auto prefixed by "var." and becomes "var.bar" #bar = 1 #var.mystring = "foo" ## integer add #bar += 1 ## string concat, with integer cast as string, result: "www.foo1.com" #server.name = "www." + mystring + var.bar + ".com" ## array merge #index-file.names = (foo + ".php") + index-file.names #index-file.names += (foo + ".php") #### include #include /etc/lighttpd/lighttpd-inc.conf ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf" #include "lighttpd-inc.conf" #### include_shell #include_shell "echo var.a=1" ## the above is same as: #var.a=1 Thank you.

  Read the article

• ProFTPd server on Ubuntu getting access denied message when successfully authenticated?

  - by exxoid

  I have a Ubuntu box with a ProFTPD 1.3.4a Server, when I try to log in via my FTP Client I cannot do anything as it does not allow me to list directories; I have tried logging in as root and as a regular user and tried accessing different paths within the FTP Server. The error I get in my FTP Client is: Status: Retrieving directory listing... Command: CDUP Response: 250 CDUP command successful Command: PWD Response: 257 "/var" is the current directory Command: PASV Response: 227 Entering Passive Mode (172,16,4,22,237,205). Command: MLSD Response: 550 Access is denied. Error: Failed to retrieve directory listing Any idea? Here is the config of my proftpd: # # /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file. # To really apply changes, reload proftpd after modifications, if # it runs in daemon mode. It is not required in inetd/xinetd mode. # # Includes DSO modules Include /etc/proftpd/modules.conf # Set off to disable IPv6 support which is annoying on IPv4 only boxes. UseIPv6 off # If set on you can experience a longer connection delay in many cases. IdentLookups off ServerName "Drupal Intranet" ServerType standalone ServerIdent on "FTP Server ready" DeferWelcome on # Set the user and group that the server runs as User nobody Group nogroup MultilineRFC2228 on DefaultServer on ShowSymlinks on TimeoutNoTransfer 600 TimeoutStalled 600 TimeoutIdle 1200 DisplayLogin welcome.msg DisplayChdir .message true ListOptions "-l" DenyFilter \*.*/ # Use this to jail all users in their homes # DefaultRoot ~ # Users require a valid shell listed in /etc/shells to login. # Use this directive to release that constrain. # RequireValidShell off # Port 21 is the standard FTP port. Port 21 # In some cases you have to specify passive ports range to by-pass # firewall limitations. Ephemeral ports can be used for that, but # feel free to use a more narrow range. # PassivePorts 49152 65534 # If your host was NATted, this option is useful in order to # allow passive tranfers to work. You have to use your public # address and opening the passive ports used on your firewall as well. # MasqueradeAddress 1.2.3.4 # This is useful for masquerading address with dynamic IPs: # refresh any configured MasqueradeAddress directives every 8 hours <IfModule mod_dynmasq.c> # DynMasqRefresh 28800 </IfModule> # To prevent DoS attacks, set the maximum number of child processes # to 30. If you need to allow more than 30 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode, in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 30 # Set the user and group that the server normally runs at. # Umask 022 is a good standard umask to prevent new files and dirs # (second parm) from being group and world writable. Umask 022 022 # Normally, we want files to be overwriteable. AllowOverwrite on # Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords: # PersistentPasswd off # This is required to use both PAM-based authentication and local passwords AuthPAMConfig proftpd AuthOrder mod_auth_pam.c* mod_auth_unix.c # Be warned: use of this directive impacts CPU average load! # Uncomment this if you like to see progress and transfer rate with ftpwho # in downloads. That is not needed for uploads rates. # UseSendFile off TransferLog /var/log/proftpd/xferlog SystemLog /var/log/proftpd/proftpd.log # Logging onto /var/log/lastlog is enabled but set to off by default #UseLastlog on # In order to keep log file dates consistent after chroot, use timezone info # from /etc/localtime. If this is not set, and proftpd is configured to # chroot (e.g. DefaultRoot or <Anonymous>), it will use the non-daylight # savings timezone regardless of whether DST is in effect. #SetEnv TZ :/etc/localtime <IfModule mod_quotatab.c> QuotaEngine off </IfModule> <IfModule mod_ratio.c> Ratios off </IfModule> # Delay engine reduces impact of the so-called Timing Attack described in # http://www.securityfocus.com/bid/11430/discuss # It is on by default. <IfModule mod_delay.c> DelayEngine on </IfModule> <IfModule mod_ctrls.c> ControlsEngine off ControlsMaxClients 2 ControlsLog /var/log/proftpd/controls.log ControlsInterval 5 ControlsSocket /var/run/proftpd/proftpd.sock </IfModule> <IfModule mod_ctrls_admin.c> AdminControlsEngine off </IfModule> # # Alternative authentication frameworks # #Include /etc/proftpd/ldap.conf #Include /etc/proftpd/sql.conf # # This is used for FTPS connections # #Include /etc/proftpd/tls.conf # # Useful to keep VirtualHost/VirtualRoot directives separated # #Include /etc/proftpd/virtuals.con # A basic anonymous configuration, no upload directories. # <Anonymous ~ftp> # User ftp # Group nogroup # # We want clients to be able to login with "anonymous" as well as "ftp" # UserAlias anonymous ftp # # Cosmetic changes, all files belongs to ftp user # DirFakeUser on ftp # DirFakeGroup on ftp # # RequireValidShell off # # # Limit the maximum number of anonymous logins # MaxClients 10 # # # We want 'welcome.msg' displayed at login, and '.message' displayed # # in each newly chdired directory. # DisplayLogin welcome.msg # DisplayChdir .message # # # Limit WRITE everywhere in the anonymous chroot # <Directory *> # <Limit WRITE> # DenyAll # </Limit> # </Directory> # # # Uncomment this if you're brave. # # <Directory incoming> # # # Umask 022 is a good standard umask to prevent new files and dirs # # # (second parm) from being group and world writable. # # Umask 022 022 # # <Limit READ WRITE> # # DenyAll # # </Limit> # # <Limit STOR> # # AllowAll # # </Limit> # # </Directory> # # </Anonymous> # Include other custom configuration files Include /etc/proftpd/conf.d/ UseReverseDNS off <Global> RootLogin on UseFtpUsers on ServerIdent on DefaultChdir /var/www DeleteAbortedStores on LoginPasswordPrompt on AccessGrantMsg "You have been authenticated successfully." </Global> Any idea what could be wrong? Thanks for your help!

  Read the article

• Optimize php-fpm and varnish for a powerfull server

  - by Jim

  My setup is: Intel® Core™ i7-2600 and RAM 16 GB DDR3 RAM varnish+nginx+php-fpm+apc for a not very heavy WordPress blog with W3 Total Cache and CDN My problem is that after 55 hits per second according to blitz.io varnish starts giving out timeouts. CPU usage at this time is hardly 1%. Free memory at all time remains 10GB+. I tried benchmarking php-fpm directly with result of 150hits/s without any timeouts. But after that the CPU usage goes 100% and it stops responding. Can you help me optimize it to handle more? As i understand nginx has nothing to do over here so i dont put its config. php-fpm config listen = /tmp/php5-fpm.sock listen.allowed_clients = 127.0.0.1 user = nginx group = nginx pm = dynamic pm.max_children = 150 pm.start_servers = 7 pm.min_spare_servers = 2 pm.max_spare_servers = 15 pm.max_requests = 500 slowlog = /var/log/php-fpm/www-slow.log php_admin_value[error_log] = /var/log/php-fpm/www-error.log php_admin_flag[log_errors] = on apc extension = apc.so apc.enabled=1 apc.shm_size=512MB apc.num_files_hint=0 apc.user_entries_hint=0 apc.ttl=7200 apc.use_request_time=1 apc.user_ttl=7200 apc.gc_ttl=3600 apc.cache_by_default=1 apc.filters apc.mmap_file_mask=/tmp/apc.XXXXXX apc.file_update_protection=2 apc.enable_cli=0 apc.max_file_size=1M apc.stat=1 apc.stat_ctime=0 apc.canonicalize=0 apc.write_lock=1 apc.report_autofilter=0 apc.rfc1867=0 apc.rfc1867_prefix =upload_ apc.rfc1867_name=APC_UPLOAD_PROGRESS apc.rfc1867_freq=0 apc.rfc1867_ttl=3600 apc.include_once_override=0 apc.lazy_classes=0 apc.lazy_functions=0 apc.coredump_unmap=0 apc.file_md5=0 apc.preload_path Varnish VCL backend default { .host = "127.0.0.1"; .port = "8080"; .connect_timeout = 6s; .first_byte_timeout = 6s; .between_bytes_timeout = 60s; } acl purgehosts { "localhost"; "127.0.0.1"; } # Called after a document has been successfully retrieved from the backend. sub vcl_fetch { # Uncomment to make the default cache "time to live" is 5 minutes, handy # but it may cache stale pages unless purged. (TODO) # By default Varnish will use the headers sent to it by Apache (the backend server) # to figure out the correct TTL. # WP Super Cache sends a TTL of 3 seconds, set in wp-content/cache/.htaccess set beresp.ttl = 24h; # Strip cookies for static files and set a long cache expiry time. if (req.url ~ "\.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|pdf|txt|tar|wav|bmp|rtf|js|flv|swf|html|htm)$") { unset beresp.http.set-cookie; set beresp.ttl = 24h; } # If WordPress cookies found then page is not cacheable if (req.http.Cookie ~"(wp-postpass|wordpress_logged_in|comment_author_)") { # set beresp.cacheable = false;#versions less than 3 #beresp.ttl>0 is cacheable so 0 will not be cached set beresp.ttl = 0s; } else { #set beresp.cacheable = true; set beresp.ttl=24h;#cache for 24hrs } # Varnish determined the object was not cacheable #if ttl is not > 0 seconds then it is cachebale if (!beresp.ttl > 0s) { # set beresp.http.X-Cacheable = "NO:Not Cacheable"; } else if ( req.http.Cookie ~"(wp-postpass|wordpress_logged_in|comment_author_)" ) { # You don't wish to cache content for logged in users set beresp.http.X-Cacheable = "NO:Got Session"; return(hit_for_pass); #previously just pass but changed in v3+ } else if ( beresp.http.Cache-Control ~ "private") { # You are respecting the Cache-Control=private header from the backend set beresp.http.X-Cacheable = "NO:Cache-Control=private"; return(hit_for_pass); } else if ( beresp.ttl < 1s ) { # You are extending the lifetime of the object artificially set beresp.ttl = 300s; set beresp.grace = 300s; set beresp.http.X-Cacheable = "YES:Forced"; } else { # Varnish determined the object was cacheable set beresp.http.X-Cacheable = "YES"; if (beresp.status == 404 || beresp.status >= 500) { set beresp.ttl = 0s; } # Deliver the content return(deliver); } sub vcl_hash { # Each cached page has to be identified by a key that unlocks it. # Add the browser cookie only if a WordPress cookie found. if ( req.http.Cookie ~"(wp-postpass|wordpress_logged_in|comment_author_)" ) { #set req.hash += req.http.Cookie; hash_data(req.http.Cookie); } } # vcl_recv is called whenever a request is received sub vcl_recv { # remove ?ver=xxxxx strings from urls so css and js files are cached. # Watch out when upgrading WordPress, need to restart Varnish or flush cache. set req.url = regsub(req.url, "\?ver=.*$", ""); # Remove "replytocom" from requests to make caching better. set req.url = regsub(req.url, "\?replytocom=.*$", ""); remove req.http.X-Forwarded-For; set req.http.X-Forwarded-For = client.ip; # Exclude this site because it breaks if cached if ( req.http.host == "sr.ituts.gr" ) { return( pass ); } # Serve objects up to 2 minutes past their expiry if the backend is slow to respond. set req.grace = 120s; # Strip cookies for static files: if (req.url ~ "\.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|pdf|txt|tar|wav|bmp|rtf|js|flv|swf|html|htm)$") { unset req.http.Cookie; return(lookup); } # Remove has_js and Google Analytics __* cookies. set req.http.Cookie = regsuball(req.http.Cookie, "(^|;\s*)(__[a-z]+|has_js)=[^;]*", ""); # Remove a ";" prefix, if present. set req.http.Cookie = regsub(req.http.Cookie, "^;\s*", ""); # Remove empty cookies. if (req.http.Cookie ~ "^\s*$") { unset req.http.Cookie; } if (req.request == "PURGE") { if (!client.ip ~ purgehosts) { error 405 "Not allowed."; } #previous version ban() was purge() ban("req.url ~ " + req.url + " && req.http.host == " + req.http.host); error 200 "Purged."; } # Pass anything other than GET and HEAD directly. if (req.request != "GET" && req.request != "HEAD") { return( pass ); } /* We only deal with GET and HEAD by default */ # remove cookies for comments cookie to make caching better. set req.http.cookie = regsub(req.http.cookie, "1231111111111111122222222333333=[^;]+(; )?", ""); # never cache the admin pages, or the server-status page, or your feed? you may want to..i don't if (req.request == "GET" && (req.url ~ "(wp-admin|bb-admin|server-status|feed)")) { return(pipe); } # don't cache authenticated sessions if (req.http.Cookie && req.http.Cookie ~ "(wordpress_|PHPSESSID)") { return(lookup); } # don't cache ajax requests if(req.http.X-Requested-With == "XMLHttpRequest" || req.url ~ "nocache" || req.url ~ "(control.php|wp-comments-post.php|wp-login.php|bb-login.php|bb-reset-password.php|register.php)") { return (pass); } return( lookup ); } Varnish Daemon options DAEMON_OPTS="-a :80 \ -T 127.0.0.1:6082 \ -f /etc/varnish/ituts.vcl \ -u varnish -g varnish \ -S /etc/varnish/secret \ -p thread_pool_add_delay=2 \ -p thread_pools=8 \ -p thread_pool_min=100 \ -p thread_pool_max=1000 \ -p session_linger=50 \ -p session_max=150000 \ -p sess_workspace=262144 \ -s malloc,5G" Im not sure where to start, should i for start optimize php-fpm and then go to varnish or php-fpm is at its max right now so i should start looking for the problem in varnish?

  Read the article

• Trying to configure HWIC-3G-HSPA

  - by user1174838

  I'm trying to configure a couple of Cisco 1941 routes. The are both identical routers. Each as a HWIC-1T (Smart Serial interface) and a HWIC-3G-HSPA 3G interface. These routers are to be sent to remote sites. We have connectivity to one of the sites but if remote site A gors down we lose connectivity to remote site B. The HWIC-1T is the primary WAN interface using frame relay joining the two remote sites We want the HWIC-3G-HSPA to be usable for direct connectivity from head office to remote site B, and also the HWIC-3G-HSPA is do be used for comms between the remote sites when the frame relay is down (happens quite a bit). I initialy tried to do dynamic routing using EIGRP however in my lab setup of laptop - 1941 - 1941 - laptop, I was unable to get end to end connectivity. I later settled on static routing and have got end to end connectivity but only over frame relay, not the HWIC-3G-HSPA. The sanitized running config for remote site A: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteA ! boot-start-marker boot-end-marker ! ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" ! username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.2.5 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.2 255.255.255.252 encapsulation frame-relay cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.3.0 255.255.255.0 10.1.1.1 permanent ip route 192.168.3.0 255.255.255.0 Cellular0/1/0 210 permanent ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The sanitized running config for remote site B: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteB ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! no ip domain lookup ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.3.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.1 255.255.255.252 encapsulation frame-relay clock rate 2000000 cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi frame-relay intf-type dce ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored ppp ipcp dns request cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.2.0 255.255.255.0 10.1.1.2 permanent ip route 192.168.2.0 255.255.255.0 Cellular0/1/0 210 permanent ! kron occurrence PING in 1 recurring policy-list ICMP ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The last problem I'm having is the 3G interfaces go down after only a few minutes of inactivity. I've tried using kron to ping the local HWIC-3G-HSPA interface (cellular 0/1/0) every minute but that hasn't been successful. Manually pinging the IP assigned (by the telco) to ce0/1/0 does bring the interface up. Any ideas? Thanks

  Read the article

• mdadm: Win7-install created a boot partition on one of my RAID6 drives. How to rebuild?

  - by EXIT_FAILURE

  My problem happened when I attempted to install Windows 7 on it's own SSD. The Linux OS I used which has knowledge of the software RAID system is on a SSD that I disconnected prior to the install. This was so that windows (or I) wouldn't inadvertently mess it up. However, and in retrospect, foolishly, I left the RAID disks connected, thinking that windows wouldn't be so ridiculous as to mess with a HDD that it sees as just unallocated space. Boy was I wrong! After copying over the installation files to the SSD (as expected and desired), it also created an ntfs partition on one of the RAID disks. Both unexpected and totally undesired! . I changed out the SSDs again, and booted up in linux. mdadm didn't seem to have any problem assembling the array as before, but if I tried to mount the array, I got the error message: mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so dmesg: EXT4-fs (md0): ext4_check_descriptors: Block bitmap for group 0 not in group (block 1318081259)! EXT4-fs (md0): group descriptors corrupted! I then used qparted to delete the newly created ntfs partition on /dev/sdd so that it matched the other three /dev/sd{b,c,e}, and requested a resync of my array with echo repair > /sys/block/md0/md/sync_action This took around 4 hours, and upon completion, dmesg reports: md: md0: requested-resync done. A bit brief after a 4-hour task, though I'm unsure as to where other log files exist (I also seem to have messed up my sendmail configuration). In any case: No change reported according to mdadm, everything checks out. mdadm -D /dev/md0 still reports: Version : 1.2 Creation Time : Wed May 23 22:18:45 2012 Raid Level : raid6 Array Size : 3907026848 (3726.03 GiB 4000.80 GB) Used Dev Size : 1953513424 (1863.02 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Mon May 26 12:41:58 2014 State : clean Active Devices : 4 Working Devices : 4 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 4K Name : okamilinkun:0 UUID : 0c97ebf3:098864d8:126f44e3:e4337102 Events : 423 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 8 32 1 active sync /dev/sdc 2 8 48 2 active sync /dev/sdd 3 8 64 3 active sync /dev/sde Trying to mount it still reports: mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so and dmesg: EXT4-fs (md0): ext4_check_descriptors: Block bitmap for group 0 not in group (block 1318081259)! EXT4-fs (md0): group descriptors corrupted! I'm a bit unsure where to proceed from here, and trying stuff "to see if it works" is a bit too risky for me. This is what I suggest I should attempt to do: Tell mdadm that /dev/sdd (the one that windows wrote into) isn't reliable anymore, pretend it is newly re-introduced to the array, and reconstruct its content based on the other three drives. I also could be totally wrong in my assumptions, that the creation of the ntfs partition on /dev/sdd and subsequent deletion has changed something that cannot be fixed this way. My question: Help, what should I do? If I should do what I suggested , how do I do that? From reading documentation, etc, I would think maybe: mdadm --manage /dev/md0 --set-faulty /dev/sdd mdadm --manage /dev/md0 --remove /dev/sdd mdadm --manage /dev/md0 --re-add /dev/sdd However, the documentation examples suggest /dev/sdd1, which seems strange to me, as there is no partition there as far as linux is concerned, just unallocated space. Maybe these commands won't work without. Maybe it makes sense to mirror the partition table of one of the other raid devices that weren't touched, before --re-add. Something like: sfdisk -d /dev/sdb | sfdisk /dev/sdd Bonus question: Why would the Windows 7 installation do something so st...potentially dangerous? Update I went ahead and marked /dev/sdd as faulty, and removed it (not physically) from the array: # mdadm --manage /dev/md0 --set-faulty /dev/sdd # mdadm --manage /dev/md0 --remove /dev/sdd However, attempting to --re-add was disallowed: # mdadm --manage /dev/md0 --re-add /dev/sdd mdadm: --re-add for /dev/sdd to /dev/md0 is not possible --add, was fine. # mdadm --manage /dev/md0 --add /dev/sdd mdadm -D /dev/md0 now reports the state as clean, degraded, recovering, and /dev/sdd as spare rebuilding. /proc/mdstat shows the recovery progress: md0 : active raid6 sdd[4] sdc[1] sde[3] sdb[0] 3907026848 blocks super 1.2 level 6, 4k chunk, algorithm 2 [4/3] [UU_U] [>....................] recovery = 2.1% (42887780/1953513424) finish=348.7min speed=91297K/sec nmon also shows expected output: ¦sdb 0% 87.3 0.0| > |¦ ¦sdc 71% 109.1 0.0|RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR > |¦ ¦sdd 40% 0.0 87.3|WWWWWWWWWWWWWWWWWWWW > |¦ ¦sde 0% 87.3 0.0|> || It looks good so far. Crossing my fingers for another five+ hours :) Update 2 The recovery of /dev/sdd finished, with dmesg output: [44972.599552] md: md0: recovery done. [44972.682811] RAID conf printout: [44972.682815] --- level:6 rd:4 wd:4 [44972.682817] disk 0, o:1, dev:sdb [44972.682819] disk 1, o:1, dev:sdc [44972.682820] disk 2, o:1, dev:sdd [44972.682821] disk 3, o:1, dev:sde Attempting mount /dev/md0 reports: mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so And on dmesg: [44984.159908] EXT4-fs (md0): ext4_check_descriptors: Block bitmap for group 0 not in group (block 1318081259)! [44984.159912] EXT4-fs (md0): group descriptors corrupted! I'm not sure what do do now. Suggestions? Output of dumpe2fs /dev/md0: dumpe2fs 1.42.8 (20-Jun-2013) Filesystem volume name: Atlas Last mounted on: /mnt/atlas Filesystem UUID: e7bfb6a4-c907-4aa0-9b55-9528817bfd70 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: user_xattr acl Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 244195328 Block count: 976756712 Reserved block count: 48837835 Free blocks: 92000180 Free inodes: 243414877 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 791 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 RAID stripe width: 2 Flex block group size: 16 Filesystem created: Thu May 24 07:22:41 2012 Last mount time: Sun May 25 23:44:38 2014 Last write time: Sun May 25 23:46:42 2014 Mount count: 341 Maximum mount count: -1 Last checked: Thu May 24 07:22:41 2012 Check interval: 0 (<none>) Lifetime writes: 4357 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: e177a374-0b90-4eaa-b78f-d734aae13051 Journal backup: inode blocks dumpe2fs: Corrupt extent header while reading journal super block

  Read the article

• Cisco ASA5505 8.2 Multiple Outside IP to Multiple Inside IP

  - by GriffJ

  Trying to setup ASA5505. Semi working but having issues with accessing services from the outside. ASA5505 Basic License, Version 8.2. (plus upgrade to unlimited inside hosts). Alert: I'm a Cisco Noob. 321.321.39.X is a place holder for privacy. I came up with this config and tested it tonight. ASA Version 8.2(1) ! hostname <removed> domain-name <removed> enable password <removed> encrypted passwd <removed> encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 172.21.36.1 255.255.252.0 ! interface Vlan2 nameif outside security-level 0 ip address 321.321.39.10 255.255.255.248 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name <removed> access-list outside_inbound extended permit tcp any host 321.321.39.10 eq pptp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq https access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 993 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq smtp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 1001 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 465 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq domain access-list outside_inbound extended permit udp any eq domain host 321.321.39.11 eq domain access-list outside_inbound extended permit tcp any host 321.321.39.12 eq www access-list outside_inbound extended permit tcp any host 321.321.39.12 eq https access-list outside_inbound extended permit tcp any host 321.321.39.13 eq www access-list outside_inbound extended permit tcp any host 321.321.39.13 eq https access-list outside_inbound extended permit icmp any any echo-reply access-list outside_inbound extended permit icmp any any source-quench access-list outside_inbound extended permit icmp any any unreachable access-list outside_inbound extended permit icmp any any time-exceeded access-list outside_inbound extended permit icmp any any traceroute access-list outside_inbound extended permit icmp any any echo pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 2 321.321.39.11-321.321.39.14 netmask 255.255.255.248 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface pptp 172.21.37.20 pptp netmask 255.255.255.255 static (inside,outside) 321.321.39.11 172.21.37.14 netmask 255.255.255.255 static (inside,outside) 321.321.39.12 172.21.37.24 netmask 255.255.255.255 static (inside,outside) 321.321.39.13 172.21.37.17 netmask 255.255.255.255 access-group outside_inbound in interface outside route outside 0.0.0.0 0.0.0.0 321.321.39.9 1 route inside 192.168.15.0 255.255.255.0 172.21.36.52 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 172.21.36.0 255.255.252.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 172.21.36.0 255.255.252.0 inside telnet timeout 60 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect pptp inspect ipsec-pass-thru inspect http ! service-policy global_policy global prompt hostname context The servers that had static forwards did not have any outside network access. couldn't ping google.com for instance. mail server couldn't Domain POP the Barracuda spam filter from our ISP etc. So after doing some reading I removed the statics for 172.21.37.11, 12 and 13, and replaced those three with what's below.. static (inside,outside) tcp 321.321.39.11 https 172.21.37.14 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 993 172.21.37.14 993 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 smtp 172.21.37.14 smtp netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 1001 172.21.37.14 1001 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 465 172.21.37.14 465 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 domain 172.21.37.14 domain netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 www 172.21.37.24 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 https 172.21.37.24 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 www 172.21.37.17 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 https 172.21.37.17 https netmask 255.255.255.255 Now the servers (for instance 172.21.37.14) could ping the outside world again. Mail started flowing (Domain POP was successful) etc. etc. But I forgot to check if webmail worked from the outside admittedly. But the webservers at 172.21.37.17 and 172.21.37.24 still didn't respond from the outside world. Although I was able to PPTP VPN in on 321.321.39.10 (interface) which is the outside interface IP address. and it is static mapped to 172.21.37.20. So I'm thinking there must be something wrong with NAT somewhere? no response from 321.321.39.11 to 321.321.39.14.. Could anyone look over the config and please let me know what I've done wrong? Is there something I've missed? well obviously but.. please help! Thank you.

  Read the article

• DNS resolution problems; dig SERVFAIL error

  - by JustinP

  I'm setting up a couple of dedicated servers, and having problems setting up my nameservers properly. One of these is a LEMP server (LAMP with nginx in place of Apache), and the other will function solely as an email server, running exim/dovecot/ASSP antispam (no Apache). The LEMP server is CentOS 5.5, with no control panel, while the email server is CentOS 5.5 as well, with cPanel/WHM. So, I've had problems getting DNS set up properly. I have two domains, each one pointing to one of these servers. The nameservers are registered correctly with the domain registrar, and the nameserver IPs are entered correctly as well. I've spoken to tech support at the registrar and they confirm that everything is set up on their end. Not knowing much about DNS, I googled nameservers and DNS until I nearly went blind, and spent hours messing with the configuration. Eventually, I got the LEMP server's DNS working properly (no cPanel). Pleased with this triumph, I'm trying to mimic that configuration and repeat the process with the email server, and it's just not happening. The nameserver starts and stops, but the domain doesn't resolve. Things I have tried Going through standard procedures to set up DNS in WHM Clearing all DNS information, uninstalling BIND, then reinstalling all of that and again going through WHM procedures for setting up DNS Clearing all DNS information, and setting up BIND via shell (completely outside of cPanel) by using my config and zone files from the LEMP server as a template named runs just fine, but nothing is resolving. When I "dig any example.com" I get a SERVFAIL message. Nslookups return no information. Here are my config and zone files. named.conf controls { inet 127.0.0.1 allow { localhost; } keys { coretext-key; }; }; options { listen-on port 53 { any; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; // Those options should be used carefully because they disable port // randomization // query-source port 53; // query-source-v6 port 53; allow-query { any; }; allow-query-cache { any; }; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; view "localhost_resolver" { match-clients { 127.0.0.0/24; }; match-destinations { localhost; }; recursion yes; //zone "." IN { // type hint; // file "/var/named/named.ca"; //}; include "/etc/named.rfc1912.zones"; }; view "internal" { /* This view will contain zones you want to serve only to "internal" clients that connect via your directly attached LAN interfaces - "localnets" . */ match-clients { localnets; }; match-destinations { localnets; }; recursion yes; zone "." IN { type hint; file "/var/named/named.ca"; }; // include "/var/named/named.rfc1912.zones"; // you should not serve your rfc1912 names to non-localhost clients. // These are your "authoritative" internal zones, and would probably // also be included in the "localhost_resolver" view above : zone "example.com" { type master; file "data/db.example.com"; }; zone "3.2.1.in-addr.arpa" { type master; file "data/db.1.2.3"; }; }; view "external" { /* This view will contain zones you want to serve only to "external" clients * that have addresses that are not on your directly attached LAN interface subnets: */ match-clients { any; }; match-destinations { any; }; recursion no; // you'd probably want to deny recursion to external clients, so you don't // end up providing free DNS service to all takers allow-query-cache { none; }; // Disable lookups for any cached data and root hints // all views must contain the root hints zone: //include "/etc/named.rfc1912.zones"; zone "." IN { type hint; file "/var/named/named.ca"; }; zone "example.com" { type master; file "data/db.example.com"; }; zone "3.2.1.in-addr.arpa" { type master; file "data/db.1.2.3"; }; }; include "/etc/rndc.key"; db.example.com $TTL 1D ; ; Zone file for example.com ; ; Mandatory minimum for a working domain ; @ IN SOA ns1.example.com. contact.example.com. ( 2011042905 ; serial 8H ; refresh 2H ; retry 4W ; expire 1D ; default_ttl ) NS ns1.example.com. NS ns2.example.com. ns1 A 1.2.3.4 ns2 A 1.2.3.5 example.com. A 1.2.3.4 localhost A 127.0.0.1 www CNAME example.com. mail CNAME example.com. ; db.1.2.3 $TTL 1D $ORIGIN 3.2.1.in-addr.arpa. @ IN SOA ns1.example.com contact.example.com. ( 2011042908 ; 8H ; 2H ; 4W ; 1D ; ) NS ns1.example.com. NS ns2.example.com. 4 PTR hostname.example.com. 5 PTR hostname.example.com. ; Also of note: both of these servers are managed. Tech support is very responsive, and largely useless. Hours go by with them asking me questions to narrow down what could be wrong, then they pass the ticket to the tech on the next shift, who ignores everything that's happened already and spend his whole shift asking all the same questions the last guy asked. So, in summary: *Nameservers, with IPs, are correctly registered with domain registrar *named is configured and running *...and must not be configured correctly, because nothing resolves. Any help would be great. I changed domains and IPs in the files to generics, but let me know if you need to know the domain in question. Thanks! UPDATE I found that I didn't have 127.0.0.1 in /etc/resolv.conf, so I added it, along with my two public IPs that I have named listening on. resolv.conf search www.example.com example.com nameserver 127.0.0.1 nameserver 7.8.9.10 ;Was in here by default, authoritative nameserver of hosting company nameserver 1.2.3.4 ;Public IP #1 nameserver 1.2.3.5 ;Public IP #2 Now when I DIG example.com from the host, it resolves. If I try to DIG from my other server (in the same datacenter), or from the internet, it times out or I get SERVFAIL.

  Read the article

• Rails 2 and Ngnix: https pages can't load css or js (but will load graphics)

  - by Max Williams

  ADMISSION: i've posted this same question on stackoverflow, before realising it's probabaly better suited to superuser, but it kind of depends on the answer: If it turns out to be a problem in my nginx config, it's definitely superuser. If it turns out to be a problem in my Rails config (or code) then it's arguably stackoverflow. I'm adding some https pages to my rails site. In order to test it locally, i'm running my site under one mongrel_rails instance (on 3000) and nginx. I've managed to get my nginx config to the point where i can actually go to the https pages, and they load. Except, the javascript and css files all fail to load: looking in the Network tab in chrome web tools, i can see that it is trying to load them via an https url. Eg, one of the non-working file urls is https://cmw-local.co.uk/stylesheets/cmw-logged-out.css?1383759216 I have these set up (or at least think i do) in my nginx config to redirect to the http versions of the static files. This seems to be working for graphics, but not for css and js files. If i click on this in the Network tab, it takes me to the above url, which redirects to the http version. So, the redirect seems to be working in some sense, but not when they're loaded by an https page. Like i say, i thought i had this covered in the second try_files directive in my config below, but maybe not. Can anyone see what i'm doing wrong? thanks, Max Here's my nginx config - sorry it's a bit lengthy! I think the error is likely to be in the first (ssl) server block: server { listen 443 ssl; keepalive_timeout 70; ssl_certificate /home/max/work/charanga/elearn_container/elearn/config/nginx/certs/max-local-server.crt; ssl_certificate_key /home/max/work/charanga/elearn_container/elearn/config/nginx/certs/max-local-server.key; ssl_session_cache shared:SSL:10m; ssl_session_timeout 10m; ssl_protocols SSLv3 TLSv1; ssl_ciphers RC4:HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; server_name elearning.dev cmw-dev.co.uk cmw-dev.com cmw-nginx.co.uk cmw-local.co.uk; root /home/max/work/charanga/elearn_container/elearn; # ensure that we serve css, js, other statics when requested # as SSL, but if the files don't exist (i.e. any non /basket controller) # then redirect to the non-https version location / { try_files $uri @non-ssl-redirect; } # securely serve everything under /basket (/basket/checkout etc) # we need general too, because of the email/username checking location ~ ^/(basket|general|cmw/account/check_username_availability) { # make sure cached copies are revalidated once they're stale add_header Cache-Control "public, must-revalidate, proxy-revalidate"; # this serves Rails static files that exist without running # other rewrite tests try_files $uri @rails-ssl; expires 1h; } location @non-ssl-redirect { return 301 http://$host$request_uri; } location @rails-ssl { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_read_timeout 180; proxy_next_upstream off; proxy_pass http://127.0.0.1:3000; expires 0d; } } #upstream elrs { # server 127.0.0.1:3000; #} server { listen 80; server_name elearning.dev cmw-dev.co.uk cmw-dev.com cmw-nginx.co.uk cmw-local.co.uk; root /home/max/work/charanga/elearn_container/elearn; access_log /home/max/work/charanga/elearn_container/elearn/log/access.log; error_log /home/max/work/charanga/elearn_container/elearn/log/error.log debug; client_max_body_size 50M; index index.html index.htm; # gzip html, css & javascript, but don't gzip javascript for pre-SP2 MSIE6 (i.e. those *without* SV1 in their user-agent string) gzip on; gzip_http_version 1.1; gzip_vary on; gzip_comp_level 6; gzip_proxied any; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; #text/html # make sure gzip does not lose large gzipped js or css files # see http://blog.leetsoft.com/2007/7/25/nginx-gzip-ssl gzip_buffers 16 8k; # Disable gzip for certain browsers. #gzip_disable "MSIE [1-6].(?!.*SV1)"; gzip_disable "MSIE [1-6]"; # blank gif like it's 1995 location = /images/blank.gif { empty_gif; } # don't serve files beginning with dots location ~ /\. { access_log off; log_not_found off; deny all; } # we don't care if these are missing location = /robots.txt { log_not_found off; } location = /favicon.ico { log_not_found off; } location ~ affiliate.xml { log_not_found off; } location ~ copyright.xml { log_not_found off; } # convert urls with multiple slashes to a single / if ($request ~ /+ ) { rewrite ^(/)+(.*) /$2 break; } # X-Accel-Redirect # Don't tie up mongrels with serving the lesson zips or exes, let Nginx do it instead location /zips { internal; root /var/www/apps/e_learning_resource/shared/assets; } location /tmp { internal; root /; } location /mnt{ root /; } # resource library thumbnails should be served as usual location ~ ^/resource_library/.*/*thumbnail.jpg$ { if (!-f $request_filename) { rewrite ^(.*)$ /images/no-thumb.png break; } expires 1m; } # don't make Rails generate the dynamic routes to the dcr and swf, we'll do it here location ~ "lesson viewer.dcr" { rewrite ^(.*)$ "/assets/players/lesson viewer.dcr" break; } # we need this rule so we don't serve the older lessonviewer when the rule below is matched location = /assets/players/virgin_lesson_viewer/_cha5513/lessonViewer.swf { rewrite ^(.*)$ /assets/players/virgin_lesson_viewer/_cha5513/lessonViewer.swf break; } location ~ v6lessonViewer.swf { rewrite ^(.*)$ /assets/players/v6lessonViewer.swf break; } location ~ lessonViewer.swf { rewrite ^(.*)$ /assets/players/lessonViewer.swf break; } location ~ lgn111.dat { empty_gif; } # try to get autocomplete school names from memcache first, then # fallback to rails when we can't location /schools/autocomplete { set $memcached_key $uri?q=$arg_q; memcached_pass 127.0.0.1:11211; default_type text/html; error_page 404 =200 @rails; # 404 not really! Hand off to rails } location / { # make sure cached copies are revalidated once they're stale add_header Cache-Control "public, must-revalidate, proxy-revalidate"; # this serves Rails static files that exist without running other rewrite tests try_files $uri @rails; expires 1h; } location @rails { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_read_timeout 180; proxy_next_upstream off; proxy_pass http://127.0.0.1:3000; expires 0d; } }

  Read the article

• Integrating JavaScript Unit Tests with Visual Studio

  - by Stephen Walther

  Modern ASP.NET web applications take full advantage of client-side JavaScript to provide better interactivity and responsiveness. If you are building an ASP.NET application in the right way, you quickly end up with lots and lots of JavaScript code. When writing server code, you should be writing unit tests. One big advantage of unit tests is that they provide you with a safety net that enable you to safely modify your existing code – for example, fix bugs, add new features, and make performance enhancements -- without breaking your existing code. Every time you modify your code, you can execute your unit tests to verify that you have not broken anything. For the same reason that you should write unit tests for your server code, you should write unit tests for your client code. JavaScript is just as susceptible to bugs as C#. There is no shortage of unit testing frameworks for JavaScript. Each of the major JavaScript libraries has its own unit testing framework. For example, jQuery has QUnit, Prototype has UnitTestJS, YUI has YUI Test, and Dojo has Dojo Objective Harness (DOH). The challenge is integrating a JavaScript unit testing framework with Visual Studio. Visual Studio and Visual Studio ALM provide fantastic support for server-side unit tests. You can easily view the results of running your unit tests in the Visual Studio Test Results window. You can set up a check-in policy which requires that all unit tests pass before your source code can be committed to the source code repository. In addition, you can set up Team Build to execute your unit tests automatically. Unfortunately, Visual Studio does not provide “out-of-the-box” support for JavaScript unit tests. MS Test, the unit testing framework included in Visual Studio, does not support JavaScript unit tests. As soon as you leave the server world, you are left on your own. The goal of this blog entry is to describe one approach to integrating JavaScript unit tests with MS Test so that you can execute your JavaScript unit tests side-by-side with your C# unit tests. The goal is to enable you to execute JavaScript unit tests in exactly the same way as server-side unit tests. You can download the source code described by this project by scrolling to the end of this blog entry. Rejected Approach: Browser Launchers One popular approach to executing JavaScript unit tests is to use a browser as a test-driver. When you use a browser as a test-driver, you open up a browser window to execute and view the results of executing your JavaScript unit tests. For example, QUnit – the unit testing framework for jQuery – takes this approach. The following HTML page illustrates how you can use QUnit to create a unit test for a function named addNumbers(). <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <title>Using QUnit</title> <link rel="stylesheet" href="http://github.com/jquery/qunit/raw/master/qunit/qunit.css" type="text/css" /> </head> <body> <h1 id="qunit-header">QUnit example</h1> <h2 id="qunit-banner"></h2> <div id="qunit-testrunner-toolbar"></div> <h2 id="qunit-userAgent"></h2> <ol id="qunit-tests"></ol> <div id="qunit-fixture">test markup, will be hidden</div> <script type="text/javascript" src="http://code.jquery.com/jquery-latest.js"></script> <script type="text/javascript" src="http://github.com/jquery/qunit/raw/master/qunit/qunit.js"></script> <script type="text/javascript"> // The function to test function addNumbers(a, b) { return a+b; } // The unit test test("Test of addNumbers", function () { equals(4, addNumbers(1,3), "1+3 should be 4"); }); </script> </body> </html> This test verifies that calling addNumbers(1,3) returns the expected value 4. When you open this page in a browser, you can see that this test does, in fact, pass. The idea is that you can quickly refresh this QUnit HTML JavaScript test driver page in your browser whenever you modify your JavaScript code. In other words, you can keep a browser window open and keep refreshing it over and over while you are developing your application. That way, you can know very quickly whenever you have broken your JavaScript code. While easy to setup, there are several big disadvantages to this approach to executing JavaScript unit tests: You must view your JavaScript unit test results in a different location than your server unit test results. The JavaScript unit test results appear in the browser and the server unit test results appear in the Visual Studio Test Results window. Because all of your unit test results don’t appear in a single location, you are more likely to introduce bugs into your code without noticing it. Because your unit tests are not integrated with Visual Studio – in particular, MS Test -- you cannot easily include your JavaScript unit tests when setting up check-in policies or when performing automated builds with Team Build. A more sophisticated approach to using a browser as a test-driver is to automate the web browser. Instead of launching the browser and loading the test code yourself, you use a framework to automate this process. There are several different testing frameworks that support this approach: · Selenium – Selenium is a very powerful framework for automating browser tests. You can create your tests by recording a Firefox session or by writing the test driver code in server code such as C#. You can learn more about Selenium at http://seleniumhq.org/. LTAF – The ASP.NET team uses the Lightweight Test Automation Framework to test JavaScript code in the ASP.NET framework. You can learn more about LTAF by visiting the project home at CodePlex: http://aspnet.codeplex.com/releases/view/35501 jsTestDriver – This framework uses Java to automate the browser. jsTestDriver creates a server which can be used to automate multiple browsers simultaneously. This project is located at http://code.google.com/p/js-test-driver/ TestSwam – This framework, created by John Resig, uses PHP to automate the browser. Like jsTestDriver, the framework creates a test server. You can open multiple browsers that are automated by the test server. Learn more about TestSwarm by visiting the following address: https://github.com/jeresig/testswarm/wiki Yeti – This is the framework introduced by Yahoo for automating browser tests. Yeti uses server-side JavaScript and depends on Node.js. Learn more about Yeti at http://www.yuiblog.com/blog/2010/08/25/introducing-yeti-the-yui-easy-testing-interface/ All of these frameworks are great for integration tests – however, they are not the best frameworks to use for unit tests. In one way or another, all of these frameworks depend on executing tests within the context of a “living and breathing” browser. If you create an ASP.NET Unit Test then Visual Studio will launch a web server before executing the unit test. Why is launching a web server so bad? It is not the worst thing in the world. However, it does introduce dependencies that prevent your code from being tested in isolation. One of the defining features of a unit test -- versus an integration test – is that a unit test tests code in isolation. Another problem with launching a web server when performing unit tests is that launching a web server can be slow. If you cannot execute your unit tests quickly, you are less likely to execute your unit tests each and every time you make a code change. You are much more likely to fall into the pit of failure. Launching a browser when performing a JavaScript unit test has all of the same disadvantages as launching a web server when performing an ASP.NET unit test. Instead of testing a unit of JavaScript code in isolation, you are testing JavaScript code within the context of a particular browser. Using the frameworks listed above for integration tests makes perfect sense. However, I want to consider a different approach for creating unit tests for JavaScript code. Using Server-Side JavaScript for JavaScript Unit Tests A completely different approach to executing JavaScript unit tests is to perform the tests outside of any browser. If you really want to test JavaScript then you should test JavaScript and leave the browser out of the testing process. There are several ways that you can execute JavaScript on the server outside the context of any browser: Rhino – Rhino is an implementation of JavaScript written in Java. The Rhino project is maintained by the Mozilla project. Learn more about Rhino at http://www.mozilla.org/rhino/ V8 – V8 is the open-source Google JavaScript engine written in C++. This is the JavaScript engine used by the Chrome web browser. You can download V8 and embed it in your project by visiting http://code.google.com/p/v8/ JScript – JScript is the JavaScript Script Engine used by Internet Explorer (up to but not including Internet Explorer 9), Windows Script Host, and Active Server Pages. Internet Explorer is still the most popular web browser. Therefore, I decided to focus on using the JScript Script Engine to execute JavaScript unit tests. Using the Microsoft Script Control There are two basic ways that you can pass JavaScript to the JScript Script Engine and execute the code: use the Microsoft Windows Script Interfaces or use the Microsoft Script Control. The difficult and proper way to execute JavaScript using the JScript Script Engine is to use the Microsoft Windows Script Interfaces. You can learn more about the Script Interfaces by visiting http://msdn.microsoft.com/en-us/library/t9d4xf28(VS.85).aspx The main disadvantage of using the Script Interfaces is that they are difficult to use from .NET. There is a great series of articles on using the Script Interfaces from C# located at http://www.drdobbs.com/184406028. I picked the easier alternative and used the Microsoft Script Control. The Microsoft Script Control is an ActiveX control that provides a higher level abstraction over the Window Script Interfaces. You can download the Microsoft Script Control from here: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=d7e31492-2595-49e6-8c02-1426fec693ac After you download the Microsoft Script Control, you need to add a reference to it to your project. Select the Visual Studio menu option Project, Add Reference to open the Add Reference dialog. Select the COM tab and add the Microsoft Script Control 1.0. Using the Script Control is easy. You call the Script Control AddCode() method to add JavaScript code to the Script Engine. Next, you call the Script Control Run() method to run a particular JavaScript function. The reference documentation for the Microsoft Script Control is located at the MSDN website: http://msdn.microsoft.com/en-us/library/aa227633%28v=vs.60%29.aspx Creating the JavaScript Code to Test To keep things simple, let’s imagine that you want to test the following JavaScript function named addNumbers() which simply adds two numbers together: MvcApplication1\Scripts\Math.js function addNumbers(a, b) { return 5; } Notice that the addNumbers() method always returns the value 5. Right-now, it will not pass a good unit test. Create this file and save it in your project with the name Math.js in your MVC project’s Scripts folder (Save the file in your actual MVC application and not your MVC test application). Creating the JavaScript Test Helper Class To make it easier to use the Microsoft Script Control in unit tests, we can create a helper class. This class contains two methods: LoadFile() – Loads a JavaScript file. Use this method to load the JavaScript file being tested or the JavaScript file containing the unit tests. ExecuteTest() – Executes the JavaScript code. Use this method to execute a JavaScript unit test. Here’s the code for the JavaScriptTestHelper class: JavaScriptTestHelper.cs   using System; using System.IO; using Microsoft.VisualStudio.TestTools.UnitTesting; using MSScriptControl; namespace MvcApplication1.Tests { public class JavaScriptTestHelper : IDisposable { private ScriptControl _sc; private TestContext _context; /// <summary> /// You need to use this helper with Unit Tests and not /// Basic Unit Tests because you need a Test Context /// </summary> /// <param name="testContext">Unit Test Test Context</param> public JavaScriptTestHelper(TestContext testContext) { if (testContext == null) { throw new ArgumentNullException("TestContext"); } _context = testContext; _sc = new ScriptControl(); _sc.Language = "JScript"; _sc.AllowUI = false; } /// <summary> /// Load the contents of a JavaScript file into the /// Script Engine. /// </summary> /// <param name="path">Path to JavaScript file</param> public void LoadFile(string path) { var fileContents = File.ReadAllText(path); _sc.AddCode(fileContents); } /// <summary> /// Pass the path of the test that you want to execute. /// </summary> /// <param name="testMethodName">JavaScript function name</param> public void ExecuteTest(string testMethodName) { dynamic result = null; try { result = _sc.Run(testMethodName, new object[] { }); } catch { var error = ((IScriptControl)_sc).Error; if (error != null) { var description = error.Description; var line = error.Line; var column = error.Column; var text = error.Text; var source = error.Source; if (_context != null) { var details = String.Format("{0} \r\nLine: {1} Column: {2}", source, line, column); _context.WriteLine(details); } } throw new AssertFailedException(error.Description); } } public void Dispose() { _sc = null; } } }     Notice that the JavaScriptTestHelper class requires a Test Context to be instantiated. For this reason, you can use the JavaScriptTestHelper only with a Visual Studio Unit Test and not a Basic Unit Test (These are two different types of Visual Studio project items). Add the JavaScriptTestHelper file to your MVC test application (for example, MvcApplication1.Tests). Creating the JavaScript Unit Test Next, we need to create the JavaScript unit test function that we will use to test the addNumbers() function. Create a folder in your MVC test project named JavaScriptTests and add the following JavaScript file to this folder: MvcApplication1.Tests\JavaScriptTests\MathTest.js /// <reference path="JavaScriptUnitTestFramework.js"/> function testAddNumbers() { // Act var result = addNumbers(1, 3); // Assert assert.areEqual(4, result, "addNumbers did not return right value!"); }   The testAddNumbers() function takes advantage of another JavaScript library named JavaScriptUnitTestFramework.js. This library contains all of the code necessary to make assertions. Add the following JavaScriptnitTestFramework.js to the same folder as the MathTest.js file: MvcApplication1.Tests\JavaScriptTests\JavaScriptUnitTestFramework.js var assert = { areEqual: function (expected, actual, message) { if (expected !== actual) { throw new Error("Expected value " + expected + " is not equal to " + actual + ". " + message); } } }; There is only one type of assertion supported by this file: the areEqual() assertion. Most likely, you would want to add additional types of assertions to this file to make it easier to write your JavaScript unit tests. Deploying the JavaScript Test Files This step is non-intuitive. When you use Visual Studio to run unit tests, Visual Studio creates a new folder and executes a copy of the files in your project. After you run your unit tests, your Visual Studio Solution will contain a new folder named TestResults that includes a subfolder for each test run. You need to configure Visual Studio to deploy your JavaScript files to the test run folder or Visual Studio won’t be able to find your JavaScript files when you execute your unit tests. You will get an error that looks something like this when you attempt to execute your unit tests: You can configure Visual Studio to deploy your JavaScript files by adding a Test Settings file to your Visual Studio Solution. It is important to understand that you need to add this file to your Visual Studio Solution and not a particular Visual Studio project. Right-click your Solution in the Solution Explorer window and select the menu option Add, New Item. Select the Test Settings item and click the Add button. After you create a Test Settings file for your solution, you can indicate that you want a particular folder to be deployed whenever you perform a test run. Select the menu option Test, Edit Test Settings to edit your test configuration file. Select the Deployment tab and select your MVC test project’s JavaScriptTest folder to deploy. Click the Apply button and the Close button to save the changes and close the dialog. Creating the Visual Studio Unit Test The very last step is to create the Visual Studio unit test (the MS Test unit test). Add a new unit test to your MVC test project by selecting the menu option Add New Item and selecting the Unit Test project item (Do not select the Basic Unit Test project item): The difference between a Basic Unit Test and a Unit Test is that a Unit Test includes a Test Context. We need this Test Context to use the JavaScriptTestHelper class that we created earlier. Enter the following test method for the new unit test: [TestMethod] public void TestAddNumbers() { var jsHelper = new JavaScriptTestHelper(this.TestContext); // Load JavaScript files jsHelper.LoadFile("JavaScriptUnitTestFramework.js"); jsHelper.LoadFile(@"..\..\..\MvcApplication1\Scripts\Math.js"); jsHelper.LoadFile("MathTest.js"); // Execute JavaScript Test jsHelper.ExecuteTest("testAddNumbers"); } This code uses the JavaScriptTestHelper to load three files: JavaScripUnitTestFramework.js – Contains the assert functions. Math.js – Contains the addNumbers() function from your MVC application which is being tested. MathTest.js – Contains the JavaScript unit test function. Next, the test method calls the JavaScriptTestHelper ExecuteTest() method to execute the testAddNumbers() JavaScript function. Running the Visual Studio JavaScript Unit Test After you complete all of the steps described above, you can execute the JavaScript unit test just like any other unit test. You can use the keyboard combination CTRL-R, CTRL-A to run all of the tests in the current Visual Studio Solution. Alternatively, you can use the buttons in the Visual Studio toolbar to run the tests: (Unfortunately, the Run All Impacted Tests button won’t work correctly because Visual Studio won’t detect that your JavaScript code has changed. Therefore, you should use either the Run Tests in Current Context or Run All Tests in Solution options instead.) The results of running the JavaScript tests appear side-by-side with the results of running the server tests in the Test Results window. For example, if you Run All Tests in Solution then you will get the following results: Notice that the TestAddNumbers() JavaScript test has failed. That is good because our addNumbers() function is hard-coded to always return the value 5. If you double-click the failing JavaScript test, you can view additional details such as the JavaScript error message and the line number of the JavaScript code that failed: Summary The goal of this blog entry was to explain an approach to creating JavaScript unit tests that can be easily integrated with Visual Studio and Visual Studio ALM. I described how you can use the Microsoft Script Control to execute JavaScript on the server. By taking advantage of the Microsoft Script Control, we were able to execute our JavaScript unit tests side-by-side with all of our other unit tests and view the results in the standard Visual Studio Test Results window. You can download the code discussed in this blog entry from here: http://StephenWalther.com/downloads/Blog/JavaScriptUnitTesting/JavaScriptUnitTests.zip Before running this code, you need to first install the Microsoft Script Control which you can download from here: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=d7e31492-2595-49e6-8c02-1426fec693ac

  Read the article

< Previous Page | 331 332 333 334 335 336 337 338  | Next Page >