Search Results

Search found 20116 results on 805 pages for 'network flow'.

Page 335/805 | < Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342  | Next Page >

• How can I access shared XP files over wifi with an Archos 5 Internet Tablet with Android?

  - by Fred

  I have an Archos 5 Internet tablet with Android. I have been using it to stream video over my XP wifi network. Yesterday the Archos stopped seeing any of my computers. I have found some programs that allow me to see the network, so I know the hardware works. However, this program does not allow me to pick the correct program to play the files I want. I suspect the problem lies somewhere on the XP side. This would probably work better if the Archos 5 allowed me to manually input the IP address. Help?

  Read the article

• how to access locally deployed webapp on ipodtouch ?

  - by abhinav

  Hi, I have a wifi network at home with a couple of laptops. I am running a Tapestry webapp on my machine. I can access this webapp from the other laptop if I use the IP address of my machine (I mean enter something like : http://192.168.1.53:8080/webapp/index.html). Now, I also want to access the same webapp through my iPodTouch which is also in this wifi network. However, when I try to do so in Safari on iPodTouch, it fails. Could someone point out what's the problem here ? Thanks, Abhinav

  Read the article

• Newbie one: Virtual Networks - Hyper-V - Remote Destktop - Only one phisical NIC

  - by josecortesp

  Hello everyone, I'll try to explain my situation and I'll apreciate any help: I have a phisical server (quad core, 4Gb ram, 1TB raid 10, etc) with Win Server 2008 R2 enterprise, running IIS, Printing, etc... Also, I want to set up 2 virtual Servers with 2008 R2 standart one with SQL Server and the other with Team Foundation. What i need is: Being able to access from inside the private phisical network, to Remote Desktops on each of the Virtual and the phisical Servers Had Access from the outside, using a router and port Forwarding, to the TFS server and the IIS server (one is virtualized, the other is phisical) This is it, but note that I only have one Phisical Nic. How do I configure this to work. When i set up the hyper-v role, on the wizard something like it showed up but I don't remmember what i choose, and right now, I cannot access none of the servers from remote desktop, not even from the phisical private network. Can anybody point me, what can i do? Thanks in advance (sorry 4 my english, i'm a spanish talker and my english isn't that good)

  Read the article

• Windows clients not using NTP server provided via DHCP

  - by gencha

  I have a network consisting mostly of Windows Vista and 7 clients and an Ubuntu server. The server provides both the DHCP and NTP services through dhcp3-server and openntpd. In my dhcpd.conf, the subnet is declared as follows: subnet 10.10.10.0 netmask 255.255.255.0 { range 10.10.10.10 10.10.10.200; option broadcast-address 10.10.10.255; option routers 10.10.10.1; option ntp-servers 10.10.10.1; } The clients don't seem to be using the NTP server though. When I capture the network traffic with Wireshark during the DHCP process, I also see no mention of the NTP option in the DHCP offer message. I am not quite sure if the clients would have to specifically request that option to receive it or if I have to make another configuration to offer the option.

  Read the article

• Techniques to read code written by others?

  - by Simon

  Are there any techniques that you find useful or follow when it comes to reading and understanding code written by others when Direct Knowledge Transfer/meeting the person who wrote the code is not an option. One of the techniques that I follow when dealing with legacy code is by adding additional debugging statements and based on the values I figure out the flow/logic. This can be tedious at times. Hence the reason behind this question, Are there any other techniques being widely practiced or that you personally follow when it comes to dealing with code written by other people/colleagues/open-source team?

  Read the article

• Oracle Database 12c is Generally Available

  - by Thanos

  Oracle Database 12c, a major release of Oracle’s flagship product, is generally available as of 25 June 2013. Oracle Database 12c introduces a breakthrough, new multitenant architecture enabling customers to create multiple, pluggable databases for database consolidation and cloud deployments. Customers will realize greater efficiency and flexibility through innovations such as Oracle Multitenant option and Automatic Data Optimization with Heat Map, for compressing and tiering data at a higher density. These unique advancements, combined with major enhancements in availability, security, and big data support, make Oracle Database 12c the ideal platform for private and public cloud deployments. As of 25/06/2013, the product is available for download on Linux x86-64, Solaris Sparc64 and Solaris (x86-64) via Oracle Technology Network. A news release is planned for July 1st, and an external launch webcast, Plug into the Cloud with Oracle Database 12c, featuring Mark Hurd, Andy Mendelsohn, Tom Kyte and other experts is planned for July 10th. Open here in New Window Everybody can register for the launch webcast here and register to attend global in-person events here. Resources: www.oracle.com/database www.oracle.com/databaseoptions Oracle Partner Network Database Knowledge Zone Open in Google Docs Viewer Open link in new tab Open link in new window Open link in new incognito window Download file Copy link address Edit PDF File on PDFescape.com

  Read the article

• NAS disk - problem with accessing SAMBA

  - by dominolog

  Hello I have a NAS disk running on some version of Linux. The disk is located in local network (5 PC running XP or Vista, all connected to Linksys Router). I have problems accessing NAS resources through SAMBA. The 1st issue is that the NAS is not accessible through hostname (even if it is configured), 2nd point is that it is mostly not accessible through IP manner (\IP_OF_NAS). Rest of services (FTP, HTTP access) works flawlessly. I connected the NAS to my home network (only 1 WinXP and Linsys router) and the NAS is working fine - SAMBA access together with hostname recognition works perfectly. I wonder this is an issue with WINS? Could anybody help? Regards

  Read the article

• Slash Notation IP - What is what?

  - by Nirmal

  We just signed up with a new ISP and we got a static IP from them. Our previous ISP just gave one IP and we were able to configure our web server using that. Now, we have got this new IP with a slash notation. This type is new to me. When I used the CIDR calculator, it gave me the following results: 202.184.7.52/30 IP: 202.184.7.52 Netmask: 255.255.255.252 Number of hosts: 2 Network address: 202.184.7.52 Broadcast address: 202.184.7.55 Can someone please help me by explaining what these are? I could not understand what the number of hosts means. Is that telling that I can use two different IP for DNS (A) records? Also, which one should I setup in my router? The network address or broadcast address? Thank you very much for any answer you may provide.

  Read the article

• Oracle VM 3: New Patch Set! (or Mega Millions winner?...you decide!..)

  - by Adam Hawley

  Today, my favorite number is 14736185 (despite the fact that it did not win me $249million in the MegaMillions lottery...or did it?)!  Why?  Because it is our latest patch release and it is chock-full of good stuff for the Oracle VM 3.0 user.  Oracle VM support customers can find it on My Oracle Support as patch number 14736185.   This can be installed on Oracle VM 3.0.x systems as an incremental patch on top of 3.0.3, so if you previously ran 3.0.3 GA or updated to 3.0.3 patch 1 ( build 150) this will just apply on top.  We're recommending you update to this patch set at your earliest convenience.  For more details, see below but also see Wim Coekaert's blog with related info here. Oracle VM Manager Update Instructions Oracle VM Manager 3.0.2 or 3.0.3 can be upgraded to this Oracle VM Manager 3.0.3 patch update. Unzip the patch file on the server running Oracle VM Manager and execute the runUpgrader.sh script. # ./runUpgrader.sh Please refer to Oracle VM Installation and Upgrade Guide for details. Upgrade Oracle VM Servers It's highly recommended to update Oracle VM Server 3.0.3 with the latest patch update. Please review Oracle VM 3.0.3 User Guide http://docs.oracle.com/cd/E26996_01/e18549/BABDDEGC.html for specific instructions how to use Yum repository to perform the server update. To receive notification on the software update delivered to Oracle Unbreakable Linux Network (ULN, http://linux.oracle.com) for Oracle VM, you can sign up here http://oss.oracle.com/mailman/listinfo/oraclevm-errata.  Additional Information Oracle VM documentation is available on the Oracle Technology Network (OTN):http://www.oracle.com/technetwork/server-storage/vm/documentation/index.html  Please refer to the Oracle VM 3.0.3 Release Notes for a list of features and known issues. For the latest information, best practices white papers and webinars, please visit http://oracle.com/virtualization

  Read the article

• networking tunnel adapter connections?

  - by Karthik Balaguru

  I understand that Tunnel Adapter LAN is for encapsulating IPv6 packets with an IPv4 header so that they can be sent across an IPv4 network. Few queries popped up in my mind based on this :- If i do 'ipconfig', Apart from ethernet adapter LAN details, I get a series of statments as below - Tunnel adapter Local Area Connection* 6 Tunnel adapter Local Area Connection* 7 Tunnel adapter Local Area Connection* 12 Tunnel adapter Local Area Connection* 13 Tunnel adapter Local Area Connection* 14 Tunnel adapter Local Area Connection* 15 Tunnel adapter Local Area Connection* 16 Except for the *16, all the other Tunnel Adapter Local Area Connections show Media Disconnected. Why is the numbering for the Tunnel adapter LAN not sequential? It is like 6, 7, 12, 13, 14, 15, 16. A strange numbering scheme! I tried to figure it out by thinking of some arithmetic series. But, it does not seem to fit in. There is a huge gap between 7 and 12. Any ideas? What is the need for so many Tunnel Adapter LAN connections? Can you tell me a scenario that requires all of those ? I did ipconfig /all to get more information. From the listing, I understand that: 16, 15, 14, 12 are Microsoft 6to4 Adapters 13, 6 are isatap Adapters 7 is Teredo Tunneling Pseudo-interface I understand that the above are for automatic tunneling so that the tunnel endpoints are determined automatically by the routing infrastructure. 6to4 is recommended by RFC3056 for automatic tunneling that uses protocol 41 for encapsulation. It is typically used when an end-user wants to connect to the IPv6 Internet using their existing IPv4 connection. Teredo is an automatic tunneling technique that uses UDP encapsulation across multiple NATs. That is, It is to grant IPv6 connectivity to nodes that are located behind IPv6-unaware NAT devices ISATAP treats the IPv4 network as a virtual IPv6 local link, with mappings from each IPv4 address to a link-local IPv6 address. That is to transmit IPv6 packets between dual-stack nodes on top of an IPv4 network. That is, to put in simple words, ISATAP is an intra-site mechanism, while the 6to4 and Teredo are for inter-site tunnelling mechanisms. It seems that Teredo should alone enabled by default in Vista, But my system does not show it to be enabled by default. Interestingly, it shows a 6to4 tunnel adapter (Tunnel adapter LAN connection 16) to be enabled by default? Any specific reasons for it? If i do ipconfig /all, why is only one Teredo present while four 6to4 are present ? I searched the internet for answers to the above queries, but I am unable to find clear answers.

  Read the article

• Virtual NIC on VM couldn't ping externally after Vmotion

  - by ToreTrygg

  Today I vmotioned 5 MS SQL 2005 servers over to a new DRS Cluster. All SQL servers use the "Production_LAN" network and a single virtual NIC of type "VMXNET 3". The first 4 SQL VM (Windows 2003 Standard or Enterprise x32 bit) vmotioned over without a hitch. The last SQL VM I vmotioned (Windows 2003 Standard x64 bit R2) vmotioned over without error, but I upon completion, I could no longer ping the VM. I went into the VM and could not even ping the gateway, however I could ping the loopback. This SQL server is extremely busy in comparison with the previous 4 VM's. I restarted the server and it came back up with the virtual nic working just fine. The build of both servers (vmotioner and vmotionee) is ESX 4.0.0 175625 - So, pre-update 1. Should I suspect the network switch/VM for possibly not updating the mac table on the switch? Anybody else ever have this issue or know what may have caused it? Thank you!

  Read the article

• Snow Leopard: Optimization

  - by Shyam

  Hi, I have bunch of questions: I have a Mac network, which has five Mac's. Right now, they are individually getting software updates. Is there a way to download the patches/security updates in a single place (repository) and point all machines to this location? Personally, I have tools like Monolingual and Onyx, but are there tools you could recommend that affect the performance of the Operating System positively? Tweaks would be nice. Links and pointers, would be really appreciated. I've read about Time machine, is there a way to backup all machines to a network drive using this tool? Thanks!

  Read the article

• How do you add a certificate for WLAN in Linux, at the command-line?

  - by Neil

  I'm using Maemo on a Nokia n810 Internet tablet, and when given a list of installed certificates to choose from when connecting to a PEAP wireless network, it's always blank. I've already installed a couple of certificates through the gui on the device, and only the certificate authorities show up. I've confirmed that Maemo's connection software that handles certificates is buggy, in such a way that certificates are never added, or properly added certificates cannot be found. Is there a way to add WLAN certificates at the command-line, and connect to a wireless network at the command-line as well? I used to use iwconfig to connect, but I never used it with PEAP. Note: I have nothing in /etc/ssl/certs

  Read the article

• How to solve 'Connection refused' errors in SSH connection?

  - by frbry

  I have an Ubuntu Server 10.10 32-bit in my home. I'm making SSH connections to it from my PC via Putty. The problem is, sometimes I'm able to login seamlessly. However, sometimes it gives me an error like this: Network error: Connection refused. Then, I dont't change anything, try to login a few times more, wait a while and try again. Sometimes I can log in, sometimes I cannot. It seems pretty random to me. What can I do to solve this? Edit: And Sometimes, Putty gives Network error: Software caused connection abort error after displaying login as: text. Here is the ping -t output: Pinging 192.168.2.254 with 32 bytes of data: Reply from 192.168.2.254: bytes=32 time=6ms TTL=64 Reply from 192.168.2.254: bytes=32 time=65ms TTL=6 Reply from 192.168.2.254: bytes=32 time=88ms TTL=6 Reply from 192.168.2.254: bytes=32 time=1ms TTL=64 Reply from 192.168.2.254: bytes=32 time=3ms TTL=64 Reply from 192.168.2.254: bytes=32 time=1ms TTL=64 Reply from 192.168.2.254: bytes=32 time=1ms TTL=64 Reply from 192.168.2.254: bytes=32 time=1ms TTL=64 Reply from 192.168.2.254: bytes=32 time=1ms TTL=64

  Read the article

• Missing Wireless access point

  - by nvcnvn

  I have an: Ubuntu 12.04 with proprietary Boardcom STA Wireless driver installed BCM43224 802.11a/b/g/n wireless card TP-LINK TD-W8101G 54Mbps Wireless ADSL2+ Modem Router Yesterday before I went to sleep, I still connect to my wireless access point, this morning when I start my laptop I don't see it in the list - there are some neighbors listed but not mine. The WLAN is green, with my old Nokia E72, I still see my access point with 100% signal. I have tried to restart my laptop and turn the firmware off/on by the switch but no help. I have read the WirelessTroubleShootingGuide but I can do anything. Here is some of my card info: *-network description: Wireless interface product: BCM43224 802.11a/b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: c0:cb:38:06:5d:53 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11abgn resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 03 serial: f0:4d:a2:42:ab:e4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.1.3 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:42 ioport:5000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff memory:f0420000-f043ffff

  Read the article

• CARP: two machines think they're the master, but only on one interface

  - by Conor McDermottroe

  I have two machines, each configured identically as a firewall/load balancer for a busy website. I have set them up with CARP and pfsync on both the internal and external interfaces. The internal interface is behaving as expected (primary listed as MASTER and secondary listed as BACKUP) On both machines, the network interfaces are as follows: em0 - External interface bge0 - Internal interface bge1 - Crossover connection between both machines carp0 - Shared external interface for CARP carp1 - Shared internal interface for CARP I've rewritten the IP addresses and MAC addresses below. The networks are as follows: 10.0.1.0/24 - External network 10.0.2.0/24 - Internal network 10.0.3.0/24 - Crossover network Here's the output from ifconfig on the primary: em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether [SNIP] inet 10.0.1.10 netmask 0xffffff00 broadcast 10.0.1.255 media: Ethernet 100baseTX <full-duplex> status: active bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.2.10 netmask 0xffffff00 broadcast 10.0.2.255 media: Ethernet 1000baseT <full-duplex> status: active bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.3.10 netmask 0xffffff00 broadcast 10.0.3.255 media: Ethernet 1000baseT <full-duplex> status: active lo0: flags=80c9<UP,LOOPBACK,RUNNING,NOARP,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152 pfsync0: flags=0<> metric 0 mtu 1460 pfsync: syncdev: bge1 syncpeer: 10.0.3.11 maxupd: 128 carp0: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.1.5 netmask 0xffffff00 carp: MASTER vhid 1 advbase 1 advskew 0 carp1: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.2.5 netmask 0xffffff00 carp: MASTER vhid 2 advbase 1 advskew 0 And here's the /etc/rc.conf excerpt from the primary: defaultrouter="10.0.1.1" network_interfaces="em0 bge0 bge1 lo0 pfsync0" cloned_interfaces="carp0 carp1" ifconfig_em0="inet 10.0.1.10 netmask 255.255.255.0 media 100BaseTX mediaopt full-duplex" ifconfig_bge0="inet 10.0.2.10 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_bge1="inet 10.0.3.10 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_carp0="vhid 1 pass [SNIP] 10.0.1.5/24" ifconfig_carp1="vhid 2 pass [SNIP] 10.0.2.5/24" pfsync_enable="YES" pfsync_syncdev="bge1" pfsync_syncpeer="10.0.3.11" And here's the output on the secondary: em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether [SNIP] inet 10.0.1.11 netmask 0xffffff00 broadcast 10.0.1.255 media: Ethernet 100baseTX <full-duplex> status: active bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.2.11 netmask 0xffffff00 broadcast 10.0.2.255 media: Ethernet 1000baseT <full-duplex> status: active bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.3.11 netmask 0xffffff00 broadcast 10.0.3.255 media: Ethernet 1000baseT <full-duplex> status: active lo0: flags=80c9<UP,LOOPBACK,RUNNING,NOARP,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152 pfsync0: flags=0<> metric 0 mtu 1460 pfsync: syncdev: bge1 syncpeer: 10.0.3.10 maxupd: 128 carp0: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.1.5 netmask 0xffffff00 carp: MASTER vhid 1 advbase 1 advskew 20 carp1: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.2.5 netmask 0xffffff00 carp: BACKUP vhid 2 advbase 1 advskew 20 And here's the /etc/rc.conf excerpt from the secondary: defaultrouter="10.0.1.1" network_interfaces="em0 bge0 bge1 lo0 pfsync0" cloned_interfaces="carp0 carp1" ifconfig_em0="inet 10.0.1.11 netmask 255.255.255.0 media 100BaseTX mediaopt full-duplex" ifconfig_bge0="inet 10.0.2.11 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_bge1="inet 10.0.3.11 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_carp0="vhid 1 pass [SNIP] advskew 20 10.0.1.5/24" ifconfig_carp1="vhid 2 pass [SNIP] advskew 20 10.0.2.5/24" pfsync_enable="YES" pfsync_syncdev="bge1" pfsync_syncpeer="10.0.3.10" What I don't understand is, the carp status on carp0 is MASTER on both machines when the status on carp1 is as it should be (MASTER on the primary and BACKUP on the secondary). What am I missing? Where should I be looking for clues?

  Read the article

• How can I permanently remove default root hints from a Server 2008 DNS server?

  - by TonyD

  My network exists in private address space and I am unable to perform DNS lookups against DNS servers on the internet directly (blocked by firewall). There are other networks that exist in the same private address space as my network. I need to be able to perform DNS lookups for devices in these networks as well. There are 2 main internal DNS servers in this private address space, but not on my netowrk. I can perform DNS lookups against both of these servers for devices internal to our address space and names on the internet. I would like to permanently remove the root hints from our Server 2008 R2 DNS server and replace them with these 2 internal DNS servers. I have removed them from the dnsmgmt console, the C:\Windows\System32\DNS\cache.dns file, and from the RootDNSServers folder under the System folder in ADUC. Even so, they continue to repopulate into the root hints tab in the server properties for DNS after roughly an hour. Does anyone know how to permanently remove these entries?

  Read the article

• Add a remote printer over ssh on OSX?

  - by GradGuy

  I have a printer at my office that is connected to a local network and my linux box at work can see it on the network. However, it is not visible to the outside world. I was trying to figure out a way to add it on my MacAir and so far have found two options: 1) Using ssh tunnel via CLI: cat file.pdf | ssh user@linuxbox lpr. 2) With Chrome installed on the linux box, using the Google Cloud Print service on the remote box and automator on my MacAir I can add the printer to Cmnd+p dialog box I like the first method since it does not require Chrome be installed and the second one since it allows to use Cmnd+p inside all applications. I was wondering if there is a way to combine by using automator to run the first command line script. What about port forwarding? Is it possible to forward the remote CUPS 631 port to a local port and then add the printer normally? What other methods would you recommend?

  Read the article

• Windows Server 2008 R2 DNS Server not working?

  - by wolfvilleian

  Hi, I have a server running Windows Server 2008 R2 hosting a DNS server, exchange 2010 and is a domain controller. One computer on the network (and domain) can ping the server 25% of the time, also when I try to ping it's own hostname it also does not work. However another computer that is on the domain can ping it fine, and another computer on the network but not domain can ping fine as well. The computer that cannot ping the server is setup to use the DNS server running on the server only (secondary dns points to nothing) and it will resolve the hostname of the server to the external IP not internal when the other two computers correctly resolve the internal All 3 computers and server are connected directly into the same switch. Does anyone have any ideas on how to fix this? Thanks

  Read the article

• Corporate Wiki Organization - Technical Documentation

  - by Dave Jarvis

  Corporations have documents describing various aspects of their technical systems, including: Custom Applications Custom Development Frameworks Third Party Applications Accounting Bug Tracking Network Management How To Guides User Manuals Software Tools Web Browsers Development IDEs Graphics GIMP xv Text Editing File Transfer ncFTP WinSCP Hardware Servers Web Database Exchange File Network Devices Printers If you had to use a Wiki to manage the documentation, what other items would you add to the list, and how would you organize it? (For example, would Software Tools make more sense under Third Party Applications?) A few constraints: The structure should not go beyond three levels deep. Avoid the word "and" in favour of two different categories. Keep the structure general: it should appy as broadly as possible. Target audience is primarily technical, but could be visible by anyone.

  Read the article

• How can I create an external SSL wrapper/tunnel page for an insecure webpage behind a firewall?

  - by Ross Rogers

  I have an security cam with a built-in webpage inside my home network. That camera is using basic HTTP authentication instead of SSL. I want to be able to access the camera's webpage from outside my network, but I don't want to open an unencrypted video stream to the outside world. Right now, I'm doing some cumbersome ssh tunneling where I bounce off an ssh server like: ssh -N -L 9090:CAMERA_IP:80 [email protected] and then I connect to my web page like: http://localhost:9090 But this is a pain. Now, gentle reader, I beseech you to tell me how I can use linux (Ubuntu) to get a fully encrypted SSL connection to my internal web page without the hassle of creating an ssh tunnel each time. I believe I can use stunnel, but I'm not sure of the command.

  Read the article

• How to change 802.1x settings for Wireless in Windows XP SP3?

  - by mspoerr

  Hello, I want to configure EAP-TLS with Machine Authentication ONLY for a wireless network. The supplicant is the bulit-in supplicant in Windows XP SP3. I found the following document: http://support.microsoft.com/kb/929847 - How to enable computer-only authentication for a 802.1X-based network in Windows Vista, in Windows Server 2008, and in Windows XP Service Pack 3 But unforunately the needed command "netsh wlan" is not available in Windows XP - "Note Windows XP SP3 and earlier versions of Windows XP do not support the netsh wlan command." How can I change the settings without the "netsh wlan" command? Thanks, mspoerr

  Read the article

• ArchBeat Link-o-Rama for 11/11/2011

  - by Bob Rhubart

  3 SOA business cases, explained in a 2-minute elevator speech | Joe McKendrick Impress your CEO — maybe even the CFO — with some quick examples of SOA making a difference to the business. ADF Faces - a logic bomb in the order of bean instantiations | Chris Muir Oracle ACE Director Chris Muir shares the details on "an interesting ADF logic bomb" discovered by one of his colleagues. 5 key trends in cloud computing's future | David Linthicum "'Cloud computing' will become just 'computing' at some point," says Linthicum, "but it will still be around as an approach to computing." What's New with XBRL? | John O'Rourke John O'Rourke shares highlights and key take-aways from the XBRL US Conference in Nashville and the XBRL International Conference in Montreal. Siri-ous Business: Enterprise Apps and Global UX Considerations | Ultan O'Broin Ultan O'Broin ponders "the enterprise applications user experience (UX) implications of Siri" and "the global UX aspects to the Siri potential." These are 11 of my favorite things! | Mike Gerdts Gerdts introduces his 11 favorite things about zones in Solaris 11. The Power of Social Recommendations | Peter Reiser "Do you really want to invest to drive YOUR audience trough public social networks," asks Reiser, "or do you want to have YOUR audience on your own social network which is seamless integrated with your web properties and business applications." Fourth Key Attribute of Cloud Computing - Provisioning | Tom Laszewski "Self-service provisioning of computing infrastructure in a cloud infrastructure is also very desirable as it can cut down the time it takes to deploy new infrastructure for a new application or scale up/down infrastructure for an existing application," says Tom Laszewski. Oracle Utilities Application Framework Whitepaper List as of November 2011 | Anthony Shorten Anthony Shorten shares an updated and nicely detailed list of Oracle Utilities Application Framework white papers. Down from the Tower; Information Integration Conversation; By the Time the Architects get to Phoenix This week on the Oracle Technology Network Architect Home Page.

  Read the article

• Can Linux works as 802.1X authenticator in bridge mode ?

  - by Kartoch

  I want to create a lab for my students with netkit (a network emulator based on 802.1X) to study 802.1X. I can create the authentication server (FreeRadius) and configure the client with XSupplicant connected by a switch (a Linux in bridge mode). I'm looking to a way to configure the switch as Authenticator, i.e.: when the client is connected, the switch only forwards EAP packets to the authentication server. then the switch lets the user access to the local network when the authentication server authorizes the client. At the present time there is a lot of documentation to do this with a wireless point but no one for a switch. Does anyone have an idea or know the good software for it ?

  Read the article

• How to Tell If Your Computer is Overheating and What to Do About It

  - by Chris Hoffman

  Heat is a computer’s enemy. Computers are designed with heat dispersion and ventilation in mind so they don’t overheat. If too much heat builds up, your computer may become unstable or suddenly shut down. The CPU and graphics card produce much more heat when running demanding applications. If there’s a problem with your computer’s cooling system, an excess of heat could even physically damage its components. Is Your Computer Overheating? When using a typical computer in a typical way, you shouldn’t have to worry about overheating at all. However, if you’re encountering system instability issues like abrupt shut downs, blue screens, and freezes — especially while doing something demanding like playing PC games or encoding video — your computer may be overheating. This can happen for several reasons. Your computer’s case may be full of dust, a fan may have failed, something may be blocking your computer’s vents, or you may have a compact laptop that was never designed to run at maximum performance for hours on end. Monitoring Your Computer’s Temperature First, bear in mind that different CPUs and GPUs (graphics cards) have different optimal temperature ranges. Before getting too worried about a temperature, be sure to check your computer’s documentation — or its CPU or graphics card specifications — and ensure you know the temperature ranges your hardware can handle. You can monitor your computer’s temperatures in a variety of different ways. First, you may have a way to monitor temperature that is already built into your system. You can often view temperature values in your computer’s BIOS or UEFI settings screen. This allows you to quickly see your computer’s temperature if Windows freezes or blue screens on you — just boot the computer, enter the BIOS or UEFI screen, and check the temperatures displayed there. Note that not all BIOSes or UEFI screens will display this information, but it is very common. There are also programs that will display your computer’s temperature. Such programs just read the sensors inside your computer and show you the temperature value they report, so there are a wide variety of tools you can use for this, from the simple Speccy system information utility to an advanced tool like SpeedFan. HWMonitor also offer this feature, displaying a wide variety of sensor information. Be sure to look at your CPU and graphics card temperatures. You can also find other temperatures, such as the temperature of your hard drive, but these components will generally only overheat if it becomes extremely hot in the computer’s case. They shouldn’t generate too much heat on their own. If you think your computer may be overheating, don’t just glance as these sensors once and ignore them. Do something demanding with your computer, such as running a CPU burn-in test with Prime 95, playing a PC game, or running a graphical benchmark. Monitor the computer’s temperature while you do this, even checking a few hours later — does any component overheat after you push it hard for a while? Preventing Your Computer From Overheating If your computer is overheating, here are some things you can do about it: Dust Out Your Computer’s Case: Dust accumulates in desktop PC cases and even laptops over time, clogging fans and blocking air flow. This dust can cause ventilation problems, trapping heat and preventing your PC from cooling itself properly. Be sure to clean your computer’s case occasionally to prevent dust build-up. Unfortunately, it’s often more difficult to dust out overheating laptops. Ensure Proper Ventilation: Put the computer in a location where it can properly ventilate itself. If it’s a desktop, don’t push the case up against a wall so that the computer’s vents become blocked or leave it near a radiator or heating vent. If it’s a laptop, be careful to not block its air vents, particularly when doing something demanding. For example, putting a laptop down on a mattress, allowing it to sink in, and leaving it there can lead to overheating — especially if the laptop is doing something demanding and generating heat it can’t get rid of. Check if Fans Are Running: If you’re not sure why your computer started overheating, open its case and check that all the fans are running. It’s possible that a CPU, graphics card, or case fan failed or became unplugged, reducing air flow. Tune Up Heat Sinks: If your CPU is overheating, its heat sink may not be seated correctly or its thermal paste may be old. You may need to remove the heat sink and re-apply new thermal paste before reseating the heat sink properly. This tip applies more to tweakers, overclockers, and people who build their own PCs, especially if they may have made a mistake when originally applying the thermal paste. This is often much more difficult when it comes to laptops, which generally aren’t designed to be user-serviceable. That can lead to trouble if the laptop becomes filled with dust and needs to be cleaned out, especially if the laptop was never designed to be opened by users at all. Consult our guide to diagnosing and fixing an overheating laptop for help with cooling down a hot laptop. Overheating is a definite danger when overclocking your CPU or graphics card. Overclocking will cause your components to run hotter, and the additional heat will cause problems unless you can properly cool your components. If you’ve overclocked your hardware and it has started to overheat — well, throttle back the overclock! Image Credit: Vinni Malek on Flickr     

  Read the article

< Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342  | Next Page >