Search Results

Search found 9343 results on 374 pages for 'flash demo'.

Page 336/374 | < Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >

  • Nmock2 and Event Expectations

    - by Kildareflare
    Im in the process of writing a test for a small application that follows the MVP pattern. Technically, I know I should have written the test before the code, but I needed to knock up a demo app quick smart and so im now going back to the test before moving on to the real development. In short I am attempting to test the presenter, however I cannot even get an empty test to run due to an Internal.ExpectationException. The exception is raised on a unexpected invocation of an event assignation. Here is the presenter class, public LBCPresenter(IView view, IModel model) { m_model = model; m_model.BatteryModifiedEvent += new EventHandler(m_model_BatteryModifiedEvent); } Model Interface public interface IModel { event EventHandler BatteryModifiedEvent; } And here is the test class, I can't see what im missing, ive told NMock to expect the event... [TestFixture] public class MVP_PresenterTester { private Mockery mocks; private IView _mockView; private IViewObserver _Presenter; private IModel _mockModel; [SetUp] public void SetUp() { mocks = new Mockery(); _mockView = mocks.NewMock<IView>(); _mockModel = mocks.NewMock<IModel>(); _Presenter = new LBCPresenter(_mockView, _mockModel); } [Test] public void TestClosingFormWhenNotDirty() { Expect.Once.On(_mockModel).EventAdd("BatteryModifiedEvent", NMock2.Is.Anything); //makes no difference if following line is commented out or not //mocks.VerifyAllExpectationsHaveBeenMet(); } } Every time I run the test I get the same expectation Exception. Any ideas?

    Read the article

  • Is there a way to validates_presence_of only one time? (to skip that validation once the user's been

    - by GoodGets
    So, I'd like for a user to see an error message if he submits a comment and the :name is blank (typical error message, don't need help with that). However, I'd then like to allow the user to skip that validation once he's been notified that "we like all comments to have a name." So, he submits the comment once, sees the notification, then can submit the form again unchanged if he really doesn't want to add a name, and the validates_presences_of :name is skipped. But, I'm not sure how to go about doing this. I thought about checking to see where the request is coming from, but after a create, errors are handed off to the "new" action, which is the same as actual "new" comments. I then thought about checking to see if flash[errors] were present, but that won't work because there are other validations a comment has to pass. Finally, I thought about trying a validates_presences_of :name, :unless = :notified but wasn't sure how to define notified. I honestly hate asking such an open ended question, but wasn't sure where to get started. So, is there a way to just check a certain validation once?

    Read the article

  • Dockable panes created in CChildFrame not visible the second time the app. starts.

    - by Nijenhuis
    Hi, I have created some dockable panes in CChildFrame::OnCreate() The first time i start the application they are shown. The second time i start the application they are created but the splitterwindows are completly against the sides of the clients area (bottom and right), so not visible. So i have to use the mouse to pull the splitters into the clientarea so that the dockable windows become visible again. If i do File-New in my app a new client window is created and showing the dockable windows as they should be. I Think this has something to do with saving the windows layout in the registry, because if i change SetRegistryKey(_T("61sakjgsajkdg")); in the CWinApp derived class of my app. and rerun they are shown again the first time. (but not the second time i restart the app). How can i save the layout of those dockable windows as well, so if i restart my app. they are visible ? Or else how do i prevent my app. of overwritting the window layout with the one previously saved. Something to do with LoadCustomState() and SaveCustomState() ?, i could no find any info on howto implement those methods. I have here a link to the demo project to demonstrate what i mean: http://www.4shared.com/file/237193472/c384f0f6/GUI60.html Could someone tell me how to show those dockable windows in my CChildFrame class the second time the app starts?

    Read the article

  • How can I set a Java applet transparency to show contents behind it?

    - by yuri
    I've got a web page with an applet inside. This applet is a drop target on a drag and drop action from the OS, I simply take an image from a folder, drag it on the applet and something happens. I give this webpage to a graphic designer and he ask to if he can put an image behind the java applet so he can simulate to change the background using CSS (it is a skinned app and graphic design can change during execution). Practically i supposed to do: <div> <applet width="50" height="50" /> </div> with this CSS: div { width:50px; height:50px; background-image: url(image.jpg) center center no-repeat; } But it doesn't work (background is opaque). It is possible to set transparency to the applet without loosing drag and drop capabilities ? I'm searching something similar to flash wmode parameter. Better solutions implies only changes on the CSS/HTML without recompiling java class so the designing team can change the page structure without changing the Java.

    Read the article

  • duplicate rows in join table with has_many => through and accepts_nested_attributes_for

    - by shalako
    An event has many artists, and an artist has many events. The join of an artist and an event is called a performance. I want to add artists to an event. This works except that I'm getting duplicate entries into my join table when creating a new event. This causes problems elsewhere. event.rb has_many :performances, :dependent => :destroy has_many :artists, :through => :performances accepts_nested_attributes_for :artists, :reject_if => proc {|a| a['name'].blank?} accepts_nested_attributes_for :performances, :reject_if => proc { |a| a['artist_id'].blank? }, :allow_destroy => true artist.rb has_many :performances, :dependent => :destroy has_many :artists, :through => :performances performance.rb belongs_to :artist belongs_to :event events_controller.rb def new @event = Event.new @event.artists.build respond_to do |format| format.html # new.html.erb format.xml { render :xml => @event } end end def create @event = Event.new(params[:event]) respond_to do |format| if @event.save flash[:notice] = 'Event was successfully created.' format.html { redirect_to(admin_events_url) } format.xml { render :xml => @event, :status => :created, :location => @event } else format.html { render :action => "new" } format.xml { render :xml => @event.errors, :status => :unprocessable_entity } end end end output Performance Create (0.2ms) INSERT INTO `performances` (`event_id`, `artist_id`) VALUES(7, 19) Performance Create (0.1ms) INSERT INTO `performances` (`event_id`, `artist_id`) VALUES(7, 19)

    Read the article

  • What arguments to use to explain why SQL Server is far better then a flat file

    - by jamone
    The higher ups in my company were told by good friends that flat files are the way to go, and we should switch from SQL Server to them for everything we do. We have over 300 servers and hundreds of different databases. From just the few I'm involved with we have 10 billion records in quite a few of them with upwards of 100k new records a day and who knows how many updates... Me and a couple others need to come up with a response saying why we shouldn't do this. Most of our stuff is ASP.NET with some legacy ASP. We thought that making a simple console app that tests/times the same interactions between a flat file (stored on the network) and SQL over the network doing large inserts, searches, updates etc along with things like network disconnects randomly. This would show them how bad flat files can be especially when you are dealing with millions of records. What things should I use in my response? What should I do with my demo code to illustrate this? My sort list so far: Security Concurrent access Performance with large amounts of data Amount of time to do such a massive rewrite/switch Lack of transactions PITA to map relational data to flat files NTFS doesn't support tons of files in a directory well I fear that this will be a great post on the Daily WTF someday if I can't stop it now.

    Read the article

  • Components don't show in custom JPanel/JComponent

    - by Bart van Heukelom
    I've created a custom swing component. I can see it (the grid from the paint method is drawn), but the buttons that are added (verified by println) aren't shown. What am I doing wrong? Background information: I'm trying to build a tree of visible objects like the Flash/AS3 display list. public class MapPanel extends JComponent { // or extends JPanel, same effect private static final long serialVersionUID = 4844990579260312742L; public MapPanel(ShapeMap map) { setBackground(Color.LIGHT_GRAY); setPreferredSize(new Dimension(1000,1000)); setLayout(null); for (Layer l : map.getLayers()) { // LayerView layerView = new LayerView(l); // add(layerView); System.out.println(l); JButton test = new JButton(l.getName()); add(test); validate(); } } @Override protected void paintComponent(Graphics g) { // necessary? super.paintComponent(g); // background g.setColor(getBackground()); g.fillRect(0, 0, getWidth(), getHeight()); // grid g.setColor(Color.GRAY); for (double x = 0; x < getWidth(); x += 10) { g.drawLine((int)x, 0, (int)x, getHeight()); } for (double y = 0; y < getHeight(); y += 10) { g.drawLine(0, (int)y, getWidth(), (int)y); } } }

    Read the article

  • Advance: Parsing XML into another XML page using only javascript or jquery; Can't use PhP, Java or MySQL

    - by UrBestFriend
    Current site: http://cardwall.tk/ Example of intended outcome: http://www.shockwave.com/downloadWall.jsp I have an embeded flash object that uses XML/RSS (Picasa) to feed itself pictures. Now I created my own XML/RSS feed so that I can add additional XML tags and values. Now here's my big problem: enabling search. Since I'm not relying on Picasa's API anymore to return custom RSS/XML for the user's search, how can I create xml from another xml based on the user's search queries using only JavaScript and Jquery? Here is the current code: <script type="text/javascript"> var flashvars = { feed : "http%3A%2F%2Frssfeed.ucoz.com%2Frssfeed.xml", backgroundColor : "#FFFFFF", metadataFont : "Arial", wmode : "opaque", iFrameScrolling: "no", numRows : "3", }; var params = { allowFullScreen: "true", allowscriptaccess : "always", wmode: "opaque" }; swfobject.embedSWF("http://apps.cooliris.com/embed/cooliris.swf", "gamewall", "810", "410", "9.0.0", "", flashvars, params); $(document).ready(function() { $("#cooliris input").keydown(function(e) { if(e.keyCode == 13) { $("#cooliris a#searchCooliris").click(); return false; } }); doCoolIrisSearch = function() { cooliris.embed.setFeedContents( '** JAVA STRING OF PARSED RSS/XML based on http%3A%2F%2Frssfeed.ucoz.com%2Frssfeed.xml and USER'S SEARCH INPUT** ' ) }); <form id="searchForm" name="searchForm" class="shockwave"> <input type="text" name="coolIrisSearch" id="coolIrisSearch" value="Search..." class="field text short" onfocus="this.value='';" /> <a id="searchCooliris" href="#" onclick="doCoolIrisSearch();return false;" class="clearLink">Search Cooliris</a> </form> <div id="gamewall"></div> So basically, I want to replace cooliris.embed.setFeedContents's value with a Javastring based on the parsed RSS/XML and user search input. Any code or ideas would be greatly appreciated.

    Read the article

  • How do I get into a career as a programmer/development DBA?

    - by markle976
    About 8-9 years ago I started getting into programming as a hobby. I started with my TI-86 calculator, and then moved into using Visual Basic. After about a year I started playing around with HTML and JavaScript. Then I discovered Flash; I programmed with Actionscript 2.0 for about 2 years which lead me to start using Coldfusion. After a while I realized that A) I am not a designer, and B) with the way that things were going with AJAX, .NET, and PHP there wasn’t much future in Coldfusion/Actionscript. I had been working mostly as an administrative assistant, but about 3-4 years ago I got a position where I would be doing some web development, and assisting the system admin with supporting windows desktop PCs. I have gotten some decent experience over the past few years, but it has been spread out in somewhat disparate areas: I spend about 40% of my time writing PHP/MySQL and HTML/CSS, etc. I spend about 20% of my time helping users with PC questions. I spend about 20% of my time doing administrative things (mail-merges, excel, etc). I spend about 20% of my time managing / creating reports from our Access Database. I have also taught myself many things on my own, and now have a beginner’s level understanding of things like: Windows Server, Java, Linux, Objective-C, SQL Server, C#, C++, Ruby, Mac OSX, VBA, VBScript, and basic IP networks. I feel like I am in a bit of a rut – I want to get my career moving, but I am not sure what I need to do. If I practice with C# and SQL Server Express for a year will that be enough to get me in the door somewhere? Would it be easier to get a position if I teach myself Linux/Apache since I have more experience with PHP/MySQL?

    Read the article

  • Zend_Auth and database SaveHandler

    - by takeshin
    I have created Zend_Auth adapter implementing Zend_Auth_Adapter_Interface (similar to Pádraic's adapter) and created simple ACL plugin. Everything works fine with default session handler. So far, so good. As a next step I have created custom Session SaveHandler to persist session data in the database. My implementation is very similar to this one from parables-demo. Seems that everything is working fine. Session data are properly saved to the database, session objects are serialized, but authentication does not work when I enable this custom SaveHandler. I have debugged the authentication and all works fine up till the next request, when the authentication data are lost. I suspected, that is has something to do with the fact, that I use $adapter->write($object) instead $adapter->write($string), but the same happens with strings. I'm bootstrapping Zend_Application_Resource_Session in the first Bootstrap method, as early as possible. Does Zend_Auth need any extra configuration to persist data in the database? Why the authentity is being lost?

    Read the article

  • Leveraging hobby experience to get a job

    - by Bernard
    Like many other's I began programming at an early age. I started when I was 11 and I learned C when I was 14 (now 26). While most of what I did were games just to entertain myself I did everything from low level 2D graphics, and binary I/O, to interfacing with free API's, custom file systems, audio, 3D animations, OpenGL, web sites, etc. I worked on a wide variety of things trying to make various games. Because of this experience I have tested out of every college level C/C++ programming course I have ever been offered. In the classes I took, my classmates would need a week to do what I finished in class with an hour or two of work. I now have my degree now and I have 2 years of experience working full time as a web developer however I would like to get back into C++ and hopefully do simulation programming. Unfortunately I have yet to do C++ as a job, I have only done it for testing out of classes and doing my senior project in college. So most of what I have in C++ is still hobby experience and I don't know how to best convey that so that I don't end up stuck doing something too low level for me. Right now I see a job offer that requires 2 years of C++ experience, but I have at least 9 (I didn't do C++ everyday for the last 14 years). How do I convey my experience? How much is it truly worth? and How do I get it's full value? The best thing that I can think of is a demo and a portfolio, however that only comes into play after an interview has been secured. I used a portfolio to land my current job. All answers and advice are appreciated.

    Read the article

  • colorbox not displaying first caption from flickr gallery integration

    - by Mark
    I am pulling small thumbnails into my page from the flickr API, and using Colorbox to display larger thumbnails and captions from the title attribute. Using the API with C#. However, on the first instance of opening colorbox it does not display the caption from the anchors title attribute. If you click next or previous then it appears. The actual caption is physically there in the source code, just not getting put into the colorbox window. Demo here, if you click on a thumbnail you will see there is no caption, click next then prev and it will appear. Here's the code: <script type="text/javascript"> $(function() { $("a[rel='group']").colorbox({ opacity: 0.75 }); }); </script> <a href='http://farm6.static.flickr.com/5015/5511378425_e63d4a62f7.jpg' title='Little Hermit (Peter Dunn)' rel='group' class='tooltip'> <img src='http://farm6.static.flickr.com/5015/5511378425_e63d4a62f7_s.jpg' alt='Little Hermit (Peter Dunn)' /> </a> If i view source, the title attribute is populated with the caption, but if i ook in firebug it is not in the colorbox code. Any help on this would be great Ive ran out of ideas!

    Read the article

  • Interactive World Map, highlight countries on mouseover

    - by BrenGG
    I need to create an interactive world map on the front page of a site, the view portal will be about 650x200 pixels. The interactivity would include the following, mouse-over a country would highlight (the countries are will literally be filled with "red" for example) that country and display the countries' name (preferably text in a div), I will also be linking the highlighting event with a that will highlight a country when selected. I am having a difficult time finding a suitable solution, I refuse to use or learn a proprietry technology such as flash so it is not an option. I created a simple mockup using openlayers and a custom map image but the countries' markers load too slowly in IE6. Also svg seems too large, as I tried to use RaphaelJS, but abondoned it when I realised the world map data is 1.2mb which is totally un acceptable for the front page of a site.. I am really at a loss on how I am going to do this, my last resort is to manually create 250+ (however many countries there are) pngs and apply mouseover events to hotspots in the image... but this is probably going to be a dead end too.. desperately seeking a solution, any helpful comments will be appreciated!

    Read the article

  • How can you push a new view with a grouped table?

    - by Tanner
    Hi All, Ive been trying to push a new view when a cell is tapped but absolutely nothing happens. I figured grouped style pushed the same as plain. Here is my code: -(void)viewDidLoad { [super viewDidLoad]; contactArray = [[NSArray alloc] initWithObjects:@"iPhone",@"iPod",@"MacBook",@"MacBook Pro",nil]; shareArray = [[NSArray alloc] initWithObjects:@"Flex",@"AIR",@"PhotoShop",@"Flash",nil]; } -(NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { return 2; } // Customize the number of rows in the table view. -(NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { if(section == 0) return [contactArray count]; else return [shareArray count]; } -(NSString *)tableView:(UITableView *)tableView titleForHeaderInSection:(NSInteger)section{ if(section == 0){ return @"Contact"; }else{ return @"Share"; } } -(NSString *)tableView:(UITableView *)tableView titleForFooterInSection:(NSInteger)section{ if(section == 0){ return @"Footer for Apple Products"; }else{ return @"Footer for Adobe Softwares"; } } // Customize the appearance of table view cells. -(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithFrame:CGRectZero reuseIdentifier:CellIdentifier] autorelease]; } // Set up the cell... if(indexPath.section == 0){ cell.text = [contactArray objectAtIndex:indexPath.row]; }else{ cell.text = [shareArray objectAtIndex:indexPath.row]; } return cell; } -(void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { //NextViewController *nextController = [[NextViewController alloc] initWithNibName:@"NextView" bundle:nil]; //[self.navigationController pushViewController:nextController animated:YES]; if([contactArray objectAtIndex:indexPath.row] == @"iPhone"){ LandscapeHydrogen *abo = [[LandscapeHydrogen alloc] initWithNibName:@"LandscapeHydrogen" bundle:nil]; [self.navigationController pushViewController:abo animated:NO]; [abo release]; } } Any help is appreciated.

    Read the article

  • iOS - Rotating view reveals background.

    - by Jack
    Hi, I have created a view that I want to be able to rotate. The two views are: containerView and this has a .backgroundColor of red and BackgroundImage as a subview. Here is my code for rotating: - (void) willRotateToInterfaceOrientation:(UIInterfaceOrientation)toInterfaceOrientation duration:(NSTimeInterval)duration { [self adjustViewsForOrientation:toInterfaceOrientation]; } - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { return YES; } - (void) adjustViewsForOrientation:(UIInterfaceOrientation)orientation { if (orientation == UIInterfaceOrientationLandscapeLeft || orientation == UIInterfaceOrientationLandscapeRight) { backgroundImage.image = [UIImage imageNamed:@"landscape.jpg"]; backgroundImage.frame = CGRectMake(0, 0, 1024, 704); containerView.frame = CGRectMake(0, 0, 1024, 704); self.title = @"landscape"; } else if (orientation == UIInterfaceOrientationPortrait || orientation == UIInterfaceOrientationPortraitUpsideDown) { backgroundImage.image = [UIImage imageNamed:@"portrait.jpg"]; backgroundImage.frame = CGRectMake(0, 0, 768, 960); containerView.frame = CGRectMake(0, 0, 768, 960); self.title = @"portrait"; } } The problem is that the image rotates, but the background color is shown whilst the view rotates. Is there a nice solution to this problem (I know that I could create the images to blend into a color and set the background to the same color, but this is not what I would like). A Video of the problem can be seen here:http://tinypic.com/r/2quj24g/6 PS the images are from the OmniGroup GitHub repo and are just used for the demo.

    Read the article

  • How to detect that the internet connection has got disconnected through a java desktop application?

    - by Yatendra Goel
    I am developing a Java Desktop Application that access internet. It is a multi-threaded application, each thread do the same work (means each thread is an instance of same Thread class). Now, as all the threads need internet connection to be active, there should be some mechanism that detects whether an internet connection is active or not. Q1. How to detect whether the internet connection is active or not? Q2. Where to implement this internet-status-check-mechanism code? Should I start a separate thread for checking internet status regularly and notifies all the threads when the status changes from one state to another? Or should I let each thread check for the internet-status itself? Q3. This issue should be a very common issue as every application accessing an internet should deal with this problem. So how other developers usually deal with this problem? Q4. If you could give me a reference to a good demo application that addresses this issue then it would greatly help me.

    Read the article

  • Unsupported smapling rate in flex/actionscript

    - by Rajeev
    In action script i need Loading configuration file /opt/flex/frameworks/flex-config.xml t3.mxml(10): Error: unsupported sampling rate (24000Hz) [Embed(source="music.mp3")] t3.mxml(10): Error: Unable to transcode music.mp3. [Embed(source="music.mp3")] The code is <?xml version="1.0"?> <!-- embed/EmbedSound.mxml --> <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"> <mx:Script> <![CDATA[ import flash.media.*; [Embed(source="sample.mp3")] [Bindable] public var sndCls:Class; public var snd:Sound = new sndCls() as Sound; public var sndChannel:SoundChannel; public function playSound():void { sndChannel=snd.play(); } public function stopSound():void { sndChannel.stop(); } ]]> </mx:Script> <mx:HBox> <mx:Button label="play" click="playSound();"/> <mx:Button label="stop" click="stopSound();"/> </mx:HBox> </mx:Application>

    Read the article

  • Resize issue to fit dynamically with any browser size

    - by Qpixo
    I'm trying to make full flash site dynamically resize in any browser size. If the browser gets smaller than the site MC should constrain to fit in the browser. (EX: 1440x900) What I have right now works like 98% of the time, but when I switch to a bigger screen size, it screws up and makes the site tiny from left to right (menu, logo, etc.) (Ex:1680x1050) Does anyone know how to fix that issue?? positionScenesOnStage(); stage.align = StageAlign.TOP_LEFT; stage.scaleMode = StageScaleMode.NO_SCALE; stage.addEventListener(Event.RESIZE, handleObjectsOnStage); private function handleObjectsOnStage(event:Event):void { positionScenesOnStage(); } private function positionScenesOnStage():void { backgroundMC = new bgMC(); backgroundMC.x = 0; backgroundMC.y = 0; backgroundMC.width = stage.stageWidth; backgroundMC.height = stage.stageHeight; addChild(backgroundMC); logo_mc = new LogoMC(); logo_mc.x = stage.stageWidth - 1420; logo_mc.y = stage.stageHeight - 700; addChild(logo_mc); menuContainer = new MenuContainerMC(); menuContainer.x = stage.stageWidth - 400; menuContainer.y = stage.stageHeight - 680; addChild(menuContainer); }

    Read the article

  • Best source control system for maintaining different versions

    - by dalecooper
    Hi all! We need to be able to simultanously maintain a set of different versions of our system. I assume this is best done using branching. We currently use TFS2008 for source control, work items and automatic builds. What is the best version control solution for this task? Our organization is in the process of merging to TFS2010. Will TFS2010 give us the functionality we need to easily manage a series of branches per system version. We need to be able to keep each version isolated from the others, so that we can do testing deployment for each version. Our dev team consists of 5 .net developers and two flash developers. I have heard a lot of talk about GIT. Should we consider using GIT instead of TFS for source control? Is it possible to use TFS2010 together with GIT? Does anyone have similar setups that works nicely? Any sugggestions are appreciated! Thanks, Kjetil.

    Read the article

  • how do I call a javacript function every 60 seconds?

    - by William
    So I'm trying to work on a Canvas demo, and I want this square to move from one side to the other, but I can't figure out how to call javascript in a way that repeats every 60 seconds. Here's what I got so far: <!DOCTYPE html> <html lang="en"> <head> <title>Canvas test</title> <meta charset="utf-8" /> <link href="/bms/style.css" rel="stylesheet" /> <style> body { text-align: center; background-color: #000000;} canvas{ background-color: #ffffff;} </style> <script type="text/javascript"> var x = 50; var y = 250; function update(){ draw(); x = x + 5; } function draw(){ var canvas = document.getElementById('screen1'); if (canvas.getContext){ var ctx = canvas.getContext('2d'); ctx.fillStyle = 'rgb(236,138,68)'; ctx.fillRect(x,y,24,24); } } </script> </head> <body onLoad="setTimeout(update(), 0);"> <canvas id="screen1" width="500" height="500"></canvas> </body> </html>

    Read the article

  • How to use python to create a GUI application which have cool animation/effects under Linux (like 3D

    - by sgon00
    Hi, I am not sure if my question title makes sense to you or not. I am seeing many cool applications which have cool animations/effects. I would like to learn how to use python to create this kind of GUI applications under Linux. "cool animation/effects" like 3D wall in Cooliris which is written in flash and compiz effects with opengl. I also heard of some python GUI library like wxPython and pyQT. Since I am completely new to python GUI programming, can anyone suggest me where to start and what I should learn to achieve and create such application? maybe learn pyQT with openGL feature? pyopengl binding? I have no clue on where to start. thank you very much for your time and suggestion. By the way, in case if someone need to know which kind of application I am going to create, well, just any kind of applications. maybe photo explorer with 3D wall, maybe IM client, maybe facebook client etc...

    Read the article

  • lightweight/portable VCS for server-hopping DBA?

    - by Aaron
    I'm looking for a VCS that'll help me keep all of my work scripts in-sync. Requirements: Portable (as in flash drive, not code-level) Run on Windows XP and Server 2003+ No installation dependencies (Cygwin, perl, Python) I use Mercurial on my work machine for version control of the various T-SQL, ksh, perl, and CMD/BAT scripts that I maintain as a MS SQL Server DBA and Unix sysadmin. So far, hg has worked for my AIX boxes- I mount my home directory as I login, and deal with the repo as if it were local. I haven't been able to find a similar solution for the Windows machines I use. Most of them I do not have Local Admin rights; even if I did, I'd rather not install (and maintain) Python + Mercurial on all of them. I can't get to my home directory on them remotely, which leaves a client running on each machine as the only option. Bonus points for an answer that would let me use a single repo for both the Windows and Unix machines. :) I'm running WinXP, with heavy use of Cygwin and a CrunchBang VM.

    Read the article

  • Multiple jQuery.noConflict() instances...

    - by user353816
    I am working with several jQuery scripts that include a MenuFader (http://css-tricks.com/examples/MenuFader/), twitter feed, and timestamp. Additionally I have a couple Mootools scripts that include the Barackslideshow (http://devthought.com/wp-content/moogets/BarackSlideshow/demo.html). And finally I have a scrolling ticker with tooltips taken from the twitter homepage. I originally had a conflict with the Jquery MenuFader and Mootools BarackSlideshow, but easily fixed this issue with the jQuery.noconflict(); and replaced all corresponding $ with jQuery. Unfortunately, after I added the scrolling ticker from Twitter, the Mootools BarackSlideshow and the Jquery MenuFader no longer work. I tried to implement jQuery.noconflict(); then $.noconflict(); then var j = jQuery.noconflict(); and replacing the $ as I did previously, but I cannot get the scripts to play nicely. Any help is greatly appreciated...I have been working on this all day. I am pretty new with javascript, but have managed to get through most problems with a little persistence. Please take a look at the script below: <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.3.0/jquery.min.js" type="text/javascript"></script> <script src="http://a2.twimg.com/a/1274914417/javascripts/fronts.js" type="text/javascript"></script> <script type="text/javascript"> //<![CDATA[ $( function () { setTimeout(function() { $(".twtr-widget").append($("<div></div>").attr("class", "twtr-fade")); }, 0); (function() { var tabIndex = $("[tabindex]:last").attr("tabIndex"); var setTabIndex = function() { $(this).attr("tabindex", ++tabIndex); } $(".footer-nav a").each(setTabIndex); $(".language-select a").each(setTabIndex); })(); $("#signup_submit").scribe({ event_name: "signup_submit_click", experiment: "ab_signup_button", bucket: "sign_up" }, "www_ab_tests"); $('#signin_menu').isSigninMenu(); new FrontPage().init(); }); //]]>

    Read the article

  • ParseKit.framework won't work, Foundation.h not found

    - by Jeremy
    I'm really stumped trying to get the ParseKit.framework (this) to work in general, not even bothering to implement it till it runs the demo app that comes with it. What happens is the compiler can't locate < Foundation/Foundation.h or something, which I thought the header was in the linked framework. Exact error: "Lexical or Preprocessor Issue: 'Foundation/Foundation.h' file not found." Here's the code, just from the ParseKit_Prefix.pch: // // Prefix header for all source files of the 'ParseKit' target in the 'ParseKit' project. //#ifdef __OBJC__ #import <Foundation/Foundation.h> #endif Nothing unusual about it, did I mess up the file paths some how? I've reinstalled Xcode, re-downloaded the ParseKit, and nothing is helping. The suggestions here did nothing and it's not this. When I make a new project or use a different project and load the Foundation.framework and #import the header it works just fine. If I unlink the framework I can't find it to re-link again. Has anyone else had this kind of problem? Did I download it wrong somewhere? I have a very difficult time finding where exactly the Xcode UI links stuff, apple must get a kick out of frustrating people, so if anyone has anything they can think of please give me some feedback, I'm horribly confused right now. Thanks,

    Read the article

  • adding a div with data()

    - by Dizzy Bryan High
    Hi people am generating a list of flash swfs, the information comes from an ajax call which returns a json object which i loop through to create the rows of data using my makeAppRow function. makeAppRow = function(myData){ var myStr = '<div class="fileEntry">' myStr = myStr +'<div class="appDate">'+dateFormat(myData.date_swf, "dS mmmm, yyyy, h:MM TT")+'</div>' myStr = myStr +'<div class="appName">'+myData.name_swf+'</div>' myStr = myStr +'<div class="appOptions" data>' myStr = myStr +'<div class="gotoAppBtn" data-options="'+myData+'">Open App</div>' myStr = myStr +'</div>' myStr = myStr +'</div>' $('#appData').append(myStr); } I need the json data to be attached to the gotoAppBtn so that when its clicked i can read in the data from the attached json object and use it in my click function, as you can see ive been trying to embed the data using the html5 data but i cant get it to work. <div class="gotoAppBtn" data-options="'+myData+'">Open App</div> i have a function so that when the button is clicked it loads in an swf. $('.gotoAppBtn').live('click', function(){ //alert('button clicked') var myData = $(this).data("options") alert('../userfiles/'+myData.id_ugp+'/'+myData.id_swf+'/'+myData.launchfile_swf+'') console.log(myData); var flashvars = {}; var params = {}; params.menu = "false"; params.quality = "best"; params.scale = "noscale"; var attributes = {}; attributes.id = "flashAppDisplay"; attributes.name = "flashAppDisplay"; swfobject.embedSWF( '../userfiles/'+myData.id_ugp+'/'+myData.id_swf+'/'+myData.launchfile_swf+'', 'flashAppDisplay', myData.width_swf, myData.height_swf, myData.version_swf ,"../FAVideo/expressInstall.swf", flashvars, params, attributes) }); but the data does not seem to be there, any pointers on where i am going wrong, or a better way to achive this???

    Read the article

< Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >