Search Results

Search found 20114 results on 805 pages for 'network adapter'.

Page 336/805 | < Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >

  • Bluetooth not found on BCM43228

    - by TK Kocheran
    I've got a Broadcom BCM43228 mPCIe card which came with my motherboard (ASUS ROG Maximus V Extreme, can't seem to find a link to what the card is) which is working great for WiFi right now, but I can't detect the Bluetooth hardware onboard. In Windows, I have full Bluetooth 4.0 support. $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.4 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) 00:1c.6 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 7 (rev c4) 00:1c.7 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 8 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1189 (rev a1) 01:00.1 Audio device: NVIDIA Corporation Device 0e0a (rev a1) 0d:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller 0e:00.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:01.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:04.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:05.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:06.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:07.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:08.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:09.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 10:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller 12:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) 15:00.0 Network controller: Broadcom Corporation BCM43228 802.11a/b/g/n 17:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) The key line seems to be: 15:00.0 Network controller: Broadcom Corporation BCM43228 802.11a/b/g/n If I try to detect the Bluetooth card, I don't see anything: $ hcitool dev Devices: rfkill list all: Output lspci: Output lsusb: Output I finally found the card with usb-devices: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=17b5 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=############ C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) I've heard that this card needs to have firmware injected into it in order to function. If that's the case, how do I do it?

    Read the article

  • Healthcare and Distributed Data Don't Mix

    - by [email protected]
    How many times have you heard the story?  Hard disk goes missing, USB thumb drive goes missing, laptop goes missing...Not a week goes by that we don't hear about our data going missing...  Healthcare data is a big one, but we hear about credit card data, pricing info, corporate intellectual property...  When I have spoken at Security and IT conferences part of my message is "Why do you give your users data to lose in the first place?"  I don't suggest they can't have access to it...in fact I work for the company that provides the premiere data security and desktop solutions that DO provide access.  Access isn't the issue.  'Keeping the data' is the issue.We are all human - we all make mistakes... I fault no one for having their car stolen or that they dropped a USB thumb drive. (well, except the thieves - I can certainly find some fault there)  Where I find fault is in policy (or lack thereof sometimes) that allows users to carry around private, and important, data with them.  Mr. Director of IT - It is your fault, not theirs.  Ms. CSO - Look in the mirror.It isn't like one can't find a network to access the data from.  You are on a network right now.  How many Wireless ones (wifi, mifi, cellular...) are there around you, right now?  Allowing employees to remove data from the confines of (wait for it... ) THE DATA CENTER is just plain indefensible when it isn't required.  The argument that the laptop had a password and the hard disk was encrypted is ridiculous.  An encrypted drive tells thieves that before they sell the stolen unit for $75, they should crack the encryption and ascertain what the REAL value of the laptop is... credit card info, Identity info, pricing lists, banking transactions... a veritable treasure trove of info people give away on an 'encrypted disk'.What started this latest rant on lack of data control was an article in Government Health IT that was forwarded to me by Denny Olson, an Oracle Principal Sales Consultant in Minnesota.  The full article is here, but the point was that a couple laptops went missing in a couple different cases, and.. well... no one knows where the data is, and yes - they were loaded with patient info.  What were you thinking?Obviously you can't steal data form a Sun Ray appliance... since it has no data, nor any storage to keep the data on, and Secure Global Desktop allows access from Macs, Linux and Windows client devices...  but in all cases, there is no keeping the data unless you explicitly allow for it in your policy.   Since you can get at the data securely from any network, why would you want to take personal responsibility for it?  Both Sun Rays and Secure Global Desktop are widely used in Healthcare... but clearly not widely enough.We need to do a better job of getting the message out -  Healthcare (or insert your business type here) and distributed data don't mix. Then add Hot Desking and 'follow me printing' and you have something that Clinicians (and CSOs) love.Thanks for putting up my blood pressure, Denny.

    Read the article

  • Expanding the Partner Ecosystem with Third-Party Plug-ins

    - by Joe Diemer
    Oracle Enterprise Manager’s extensibility capabilities are designed to allow customers and partners to adapt Enterprise Manager for management of heterogeneous environments with Plug-ins and Connectors.  Third-party developers continue to take advantage of Oracle Enterprise Manager’s Extensibility Development Kit (EDK) to build plug-ins to Enterprise Manager 12c, such as F5’s BIG IP Plug-in and Entuity’s Eye of the Storm Network Management Plug-In.  Partners can also validate their plug-ins through the Oracle Validated Integration (OVI) program, which assures customers that the plug-in has been tested and is functionally and technically sound, is designed in a reliable and standardized manner, and operates and performs as documented.   Two very recent examples of partners which have beta versions of their plug-ins are Blue Medora's VMware vSphere plug-in and the NetApp Storage plug-in.  VMware vSphere Plug-in by Blue Medora Blue Medora, an Oracle Partner Network (OPN) “Gold” member, which just announced that it is now signing up customers to try a beta version of their new VMware vSphere plug-in for Enterprise Manager 12c.  According to Blue Medora, the vSphere plug-in monitors critical VMware metrics (CPU, Memory, Disk, Network, etc) at the Host, VM, Cluster and Resource Pool levels.  It has minimal performance impact via an “agentless” approach that requires no installation directly on VMware servers.  It has discovery capabilities for VMware Datacenters, ESX Hosts, Clusters, Virtual Machines, and Datastores.  It offers integration of native VMware Events into Enterprise Manager, and it provides over 300 VMware-related health, availability, performance, and configuration metrics.  It comes with more than 30 out-of-the-box pre-defined thresholds and can manage VMware via a series of jobs split between cluster, host and VM target types.The company reports that the Enterprise Manager 12c plug-in supports vSphere versions 4.0, 4.5 and 5.0.  Platforms supported include Linux 64-bit, Windows, AIX and Solaris SPARC and x86.  Information about the plug-in, including how to sign up for the beta, is available at their web site at http://bluemedora.com after selecting the "Products" tab. NetApp Storage Plug-in NetApp believes the combination of storage system monitoring with comprehensive management of Oracle systems with Enterprise Manager will help customers reduce the cost and complexity of managing applications that rely on NetApp storage and Oracle technologies.  So, NetApp built a plug-in and reports that it has comprehensive availability and performance information for NetApp storage systems.  Using the plug-in, Oracle Enterprise Manager customers with NetApp storage solutions can track the association between databases and storage components and thereby respond to faults and IO performance bottlenecks quickly. With the latest configuration management capabilities, one can also perform drift analysis to make sure all storage systems are configured as per established gold standards. The company is also now signing up beta customers, which can be done at the NetApp Communities site at https://communities.netapp.com/groups/netapp-storage-system-plug-in-for-oem12c-beta. Learn More about Enterprise Manager Extensibility More plug-ins from other partners are soon to come, which I'll be reporting on them here.  To learn more about Enterprise Manager and how customers and partners can build plug-ins using the EDK to manage a multi-vendor data center, go to http://oracle.com/enterprisemanager in the Heterogeneous Management solution area.  The site also lists the plug-ins available with information on how to obtain them.  More info about the Oracle Validated Integration program can be found at the OPN Enterprise Manager Knowledge Zone in the "Develop" tab.

    Read the article

  • Oracle EMEA News Digest - May 2014

    - by Steve Walker
    Systems Oracle introduced a technology preview of an OpenStack® distribution that allows Oracle Linux and Oracle VM users to work with the open source cloud software. This provides customers with additional choices and interoperability while taking advantage of the efficiency, performance, scalability, and security of Oracle Linux and Oracle VM. The distribution is delivered as part of the Oracle Linux and Oracle VM Premier Support offerings, at no additional cost. Oracle plans to work further with the OpenStack community to develop and enhance its enterprise-class capabilities to meet customer demands. Also in the Open Source arena, Oracle announced the general availability of MySQL Fabric. MySQL Fabric provides an integrated system that makes it simpler to manage groups of MySQL databases. It delivers both high availability - via failure detection and failover - and scalability through automated data sharding. Oracle Database, Middleware and Technology The company made two announcements for Oracle Tuxedo, the #1 application server for C, C++, COBOL and Java deployments in private cloud or traditional data center environments. With enhanced management and monitoring features and tighter integration with Oracle technologies, the latest release of Oracle Tuxedo 12c enables organizations to dramatically increase application throughput, while reducing total cost of ownership and time to market for new application development and deployment. Oracle also introduced the latest release of its mainframe application rehosting platform, Oracle Tuxedo ART 12c, to help organizations speed up migration projects and accelerate the adoption of the new environment by current IT staff. It enables organizations to accelerate the rehosting of IBM mainframe applications and greatly enhance management and supportability of the rehosted applications while reducing costs and risk. Applications According to new Oracle studies, B2B and B2C commerce professionals find integrated, omni-channel customer experiences increasingly valuable to their organizations, and are continuing to invest in technologies and digital content strategies to facilitate them. The studies—one for B2B and one for B2C—surveyed e-commerce professionals in business and technology departments from around the world. Although the priorities, success metrics, and technology investments differed between the two groups, customer acquisition and retention emerged as common themes across B2B and B2C. Growing market share and enhancing customer experience are cited as top investment areas for all e-commerce professionals. In product news, Oracle announced the latest release of Oracle Business Intelligence (BI) Applications (version 11.1.1.8.1, in case anyone asks). It includes prebuilt connectors between Oracle Procurement and Spend Analytics and Oracle’s JD Edwards. Additionally, a new Oracle Human Resources Analytics module for developing and maintaining a skilled workforce has been introduced. In use at more than 4,000 companies worldwide, Oracle BI Applications support leading enterprise applications, including Oracle E-Business Suite, Oracle’s PeopleSoft, Oracle's Siebel CRM, Oracle’s JD Edwards EnterpriseOne offering high-performing analytics at a lower cost. Industries For the Communications Industry, Oracle has launched a new release of the Oracle Communications Core Session Manager. This gives CSPs a new way to design, deploy and manage complex networking services and embrace next-generation technology, It provides them with an immediate entry point for  network function virtualization (NFV) efforts, allowing them to realize immediate benefits associated with network virtualization – including increased service agility and improved network resource sharing. And for the Utilities Industry, Oracle is releasing solutions with new business features and enhanced technical architecture that help position utilities for success now and into the future. Oracle has provided new releases for its customer information system,  meter data management system, customer self-service solution and mobile workforce management solution.

    Read the article

  • WebCenter Customer Spotlight: Ancestry.com

    - by me
    Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummaryAncestry.com Inc is the largest for-profit genealogy company in the world and it operates a network of genealogical and historical record websites focused on the U.S. and nine foreign countries, develops and markets genealogical software, and offers a wide array of genealogical related services. As of June 2012, the company provided access to more than 10 billion records, 38 million family trees, and 2 million paying subscribers. Their main business challenges were to improve time to market and agility to respond quickly to fast changing Internet waves while integrating with their existing content (4 PetaByte) and legacy systems. Ancestry.com implemented Oracle WebCenter Sites as their Web Experience Management System for their landing pages and marketing micro sites, added dynamic sections to their existing websites and integrated the existing content and legacy systems through web services. The Ancestry.com landing pages and marketing sites are now managed by the business team without any involvement of engineering resources. Managed content can quickly be added to existing pages without having to refactor the whole page and existing content (4 PetaBytes)  is now served trough Oracle WebCenter Sites without having to migrate from existing systems. Company OverviewAncestry.com Inc is a publicly traded Internet company (NASDAQ: ACOM) based in Provo, Utah, USA. The largest for-profit genealogy company in the world, it operates a network of genealogical and historical record websites focused on the U.S. and nine foreign countries, develops and markets genealogical software, and offers a wide array of genealogical related services. As of June 2012, the company provided access to more than 10 billion records, 38 million family trees, and 2 million paying subscribers. Business ChallengesAncestry main business challenge was to respond quickly to fast changing Internet waves.  Product marketing could not change Web site content without going through development. They needed dedicated developers just to support their marketing efforts. Technical Requirements Support current systems and environments - ASP.NET, MVC.NET, Java, JSP, PHP Scalable and manageable for a world wide network Marketing Requirements Easy to enter content – Without having a degree in HTML Scheduling of content – When is content visible to users Product Requirements Easy to manage content – See when content is out-of-date Rotation of content – Producing new content as old content expires Solution DeployedAncestry implemented  Oracle WebCenter Sites as their Web Experience Management System to manage their landing pages and marketing micro sites. This sites are fully managed by their business team without involvement of any engineering resources. The integration with their existing Web sites is done through Spot Management which allows the ability to add dynamic content to certain sections of a web page. The dynamic content is managed by  Oracle WebCenter Sites. The integration with the existing content (4 PetaBytes!) is done trough  a custom content provider interface which allows to mix existing content with content from  Oracle WebCenter Sites. Business ResultsAncestry.com has achieved following impressive business results: Landing pages and marketing sites are now managed by the business team without any involvement of engineering resources Managed content can quickly be added to existing pages without having to refactor the whole page Provide access to existing content (4 PetaBytes)  without having to migrate from existing systems Additional Information Ancestry Webcast Oracle WebCenter Sites

    Read the article

  • To SYNC or not to SYNC – Part 4

    - by AshishRay
    This is Part 4 of a multi-part blog article where we are discussing various aspects of setting up Data Guard synchronous redo transport (SYNC). In Part 1 of this article, I debunked the myth that Data Guard SYNC is similar to a two-phase commit operation. In Part 2, I discussed the various ways that network latency may or may not impact a Data Guard SYNC configuration. In Part 3, I talked in details regarding why Data Guard SYNC is a good thing, and the distance implications you have to keep in mind. In this final article of the series, I will talk about how you can nicely complement Data Guard SYNC with the ability to failover in seconds. Wait - Did I Say “Seconds”? Did I just say that some customers do Data Guard failover in seconds? Yes, Virginia, there is a Santa Claus. Data Guard has an automatic failover capability, aptly called Fast-Start Failover. Initially available with Oracle Database 10g Release 2 for Data Guard SYNC transport mode (and enhanced in Oracle Database 11g to support Data Guard ASYNC transport mode), this capability, managed by Data Guard Broker, lets your Data Guard configuration automatically failover to a designated standby database. Yes, this means no human intervention is required to do the failover. This process is controlled by a low footprint Data Guard Broker client called Observer, which makes sure that the primary database and the designated standby database are behaving like good kids. If something bad were to happen to the primary database, the Observer, after a configurable threshold period, tells that standby, “Your time has come, you are the chosen one!” The standby dutifully follows the Observer directives by assuming the role of the new primary database. The DBA or the Sys Admin doesn’t need to be involved. And - in case you are following this discussion very closely, and are wondering … “Hmmm … what if the old primary is not really dead, but just network isolated from the Observer or the standby - won’t this lead to a split-brain situation?” The answer is No - It Doesn’t. With respect to why-it-doesn’t, I am sure there are some smart DBAs in the audience who can explain the technical reasons. Otherwise - that will be the material for a future blog post. So - this combination of SYNC and Fast-Start Failover is the nirvana of lights-out, integrated HA and DR, as practiced by some of our advanced customers. They have observed failover times (with no data loss) ranging from single-digit seconds to tens of seconds. With this, they support operations in industry verticals such as manufacturing, retail, telecom, Internet, etc. that have the most demanding availability requirements. One of our leading customers with massive cloud deployment initiatives tells us that they know about server failures only after Data Guard has automatically completed the failover process and the app is back up and running! Needless to mention, Data Guard Broker has the integration hooks for interfaces such as JDBC and OCI, or even for custom apps, to ensure the application gets automatically rerouted to the new primary database after the database level failover completes. Net Net? To sum up this multi-part blog article, Data Guard with SYNC redo transport mode, plus Fast-Start Failover, gives you the ideal triple-combo - that is, it gives you the assurance that for critical outages, you can failover your Oracle databases: very fast without human intervention, and without losing any data. In short, it takes the element of risk out of critical IT operations. It does require you to be more careful with your network and systems planning, but as far as HA is concerned, the benefits outweigh the investment costs. So, this is what we in the MAA Development Team believe in. What do you think? How has your deployment experience been? We look forward to hearing from you!

    Read the article

  • Friday Tips #6, Part 1

    - by Chris Kawalek
    We have a two parter this week, with this post focusing on desktop virtualization and the next one on server virtualization. Question: Why would I use the Oracle Secure Global Desktop Secure Gateway? Answer by Rick Butland, Principal Sales Consultant, Oracle Desktop Virtualization: Well, for the benefit of those who might not be familiar with client connections in Oracle Secure Global Desktop (SGD), let me back up and briefly explain. An SGD client connects to an SGD server using two distinct protocols, which, by default, require two distinct TCP ports. The first is the HTTP protocol, used by the web browser to connect to the SGD webserver on TCP port 80, or if secure connections are enabled (SSL/TLS), then TCP port 443, commonly identified as the "HTTPS" port, that is, "SSL encrypted HTTP." The second protocol from the client to the server is the Adaptive Internet Protocol, or AIP, which is used for displaying applications, transferring drive mapping data, print jobs, and so on. By default, AIP uses the TCP port 3104, or port 5307 when SSL is enabled. When SGD clients need to access SGD over a firewall, the ports that AIP requires are typically "closed"; and most administrators are reluctant, to put it mildly, to change their firewall configurations to allow AIP traffic on 3144/5307.   To avoid this problem, SGD introduced "Firewall Forwarding", a technique where, in effect, both http and AIP traffic are "multiplexed" onto a single "well-known" TCP port, that is port 443, the https port.  This is also known as single-port firewall traversal.  This technique takes advantage of the fact that, as a "well-known service", port 443 is usually "open",   allowing (encrypted) traffic to pass. At the target SGD server, the two protocols are de-multiplexed and routed appropriately. The Secure Gateway was developed in response to requirements from customers for SGD to support multi-stage DMZ's, and to avoid exposing SGD servers and the information they contain directly to connections from the Internet. The Secure Gateway acts as a reverse-proxy in the first-tier of the DMZ, accepting, authenticating, and terminating incoming client connections, and then re-encrypting the connections, and proxying them, routing them on to SGD servers, deeper in the network. The client no longer needs to know the name/IP address of the SGD servers in their network, they connect to the gateway, only. The gateway takes care of those internal network details.     The Secure Gateway supports the same "single-port firewall" capability as does "Firewall Forwarding", but offers the additional advantage of load-balancing incoming client connections amongst SGD array members, which could be cumbersome without a forward-deployed secure gateway. Load-balancing weights and policies can be monitored and tuned using the "Balancer Manager" application, and Apache mod_proxy_balancer directives.   Going forward, our architects recommend the use of the Secure Gateway over "Firewall Forwarding" for single-port firewall traversal, due to its architectural advantages, its greater flexibility and enhanced features.  Finally, it should be noted that the Secure Gateway is not separately priced; any licensed SGD customer may use the Secure Gateway component at no additional cost.   For more information, see the "Secure Gateway Administrator's Guide".

    Read the article

  • Ubuntu 12.04 LXC nat prerouting not working

    - by petermolnar
    I have a running Debian Wheezy setup I copied exactly to an Ubuntu 12.04 ( elementary OS, used as desktop as well ) While the Debian setup runs flawlessly, the Ubuntu version dies on the prerouting to containers ( or so it seems ) In short: lxc works containers work and run connecting to container from host OK ( including mixed ports & services ) connecting to outside world from container is fine What does not work is connecting from another box to the host on a port that should be NATed to a container. The setups: /etc/rc.local CMD_BRCTL=/sbin/brctl CMD_IFCONFIG=/sbin/ifconfig CMD_IPTABLES=/sbin/iptables CMD_ROUTE=/sbin/route NETWORK_BRIDGE_DEVICE_NAT=lxc-bridge HOST_NETDEVICE=eth0 PRIVATE_GW_NAT=192.168.42.1 PRIVATE_NETMASK=255.255.255.0 PUBLIC_IP=192.168.13.100 ${CMD_BRCTL} addbr ${NETWORK_BRIDGE_DEVICE_NAT} ${CMD_BRCTL} setfd ${NETWORK_BRIDGE_DEVICE_NAT} 0 ${CMD_IFCONFIG} ${NETWORK_BRIDGE_DEVICE_NAT} ${PRIVATE_GW_NAT} netmask ${PRIVATE_NETMASK} promisc up Therefore lxc network is 192.168.42.0/24 and the host eth0 ip is 192.168.13.100; setup via network manager as static address. iptables: *mangle :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT *filter :FORWARD ACCEPT [0:0] :INPUT DROP [0:0] :OUTPUT ACCEPT [0:0] # Accept traffic from internal interfaces -A INPUT -i lo -j ACCEPT # accept traffic from lxc network -A INPUT -d 192.168.42.1 -s 192.168.42.0/24 -j ACCEPT # Accept internal traffic Make sure NEW incoming tcp connections are SYN # packets; otherwise we need to drop them: -A INPUT -p tcp ! --syn -m state --state NEW -j DROP # Packets with incoming fragments drop them. This attack result into Linux server panic such data loss. -A INPUT -f -j DROP # Incoming malformed XMAS packets drop them: -A INPUT -p tcp --tcp-flags ALL ALL -j DROP # Incoming malformed NULL packets: -A INPUT -p tcp --tcp-flags ALL NONE -j DROP # Accept traffic with the ACK flag set -A INPUT -p tcp -m tcp --tcp-flags ACK ACK -j ACCEPT # Allow incoming data that is part of a connection we established -A INPUT -m state --state ESTABLISHED -j ACCEPT # Allow data that is related to existing connections -A INPUT -m state --state RELATED -j ACCEPT # Accept responses to DNS queries -A INPUT -p udp -m udp --dport 1024:65535 --sport 53 -j ACCEPT # Accept responses to our pings -A INPUT -p icmp -m icmp --icmp-type echo-reply -j ACCEPT # Accept notifications of unreachable hosts -A INPUT -p icmp -m icmp --icmp-type destination-unreachable -j ACCEPT # Accept notifications to reduce sending speed -A INPUT -p icmp -m icmp --icmp-type source-quench -j ACCEPT # Accept notifications of lost packets -A INPUT -p icmp -m icmp --icmp-type time-exceeded -j ACCEPT # Accept notifications of protocol problems -A INPUT -p icmp -m icmp --icmp-type parameter-problem -j ACCEPT # Respond to pings, but limit -A INPUT -m icmp -p icmp --icmp-type echo-request -m state --state NEW -m limit --limit 6/s -j ACCEPT # Allow connections to SSH server -A INPUT -p tcp -m tcp --dport 22 -m state --state NEW -m limit --limit 12/s -j ACCEPT COMMIT *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 2221 -m state --state NEW -m limit --limit 12/s -j DNAT --to-destination 192.168.42.11:22 -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 80 -m state --state NEW -m limit --limit 512/s -j DNAT --to-destination 192.168.42.11:80 -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 443 -m state --state NEW -m limit --limit 512/s -j DNAT --to-destination 192.168.42.11:443 -A POSTROUTING -d 192.168.42.0/24 -o eth0 -j SNAT --to-source 192.168.13.100 -A POSTROUTING -o eth0 -j MASQUERADE COMMIT sysctl: net.ipv4.conf.all.forwarding = 1 net.ipv4.conf.all.mc_forwarding = 0 net.ipv4.conf.default.forwarding = 1 net.ipv4.conf.default.mc_forwarding = 0 net.ipv4.ip_forward = 1 I've set up full iptables log on the container; none of the packets addressed to 192.168.13.100, port 80 is reaching the container. I've even tried different kernels ( server kernel, raring lts kernel, etc ), modprobe everything iptables & nat related, nothing. Any ideas?

    Read the article

  • Wireless device bug on 13.10. BCM4313 registers as eth1 instead of wlan0 and no internet access

    - by user205691
    My Hotel wiFi requires me to login with a username & password after connecting to the hotspot. So, my browser would open a page with username & passwrd fields to login and then connect to internet. But unfortunately, firefox & chromium dont seem to work. i dont think it is browser related but a setting for the wifi router or driver which is creating this issue. using Broadcom 801.11 STA wireless driver (proprietary). tried open source as well but same result !! The image linked below shows my wifi connection setting & Chromium. The login page itself comes up after a long time and after entering the credentials, it keeps loading for ever !! it is the same case for every other browser.. so i dont think its browser issue but something to do with wifi setting or network manager stuff.. interestingly, i am able to connect to WiFi networks with WPA key without any issue. Adhoc hotspot is a problem and that is my regular home network :( .. I hope i can get some help solving this issue ! I have tried repeating the same hotspot after login from my android, by creating a virtual repeater with WPA key and it works. I can browse on ubuntu using this method.. but cant be doing this regularly ! I tried loading the same login page of the hotel wifi while browsing through my repeater wifi created on mobile and screen shot attached below. the page loads up quick and easy.. so this means something is wrong with the way network manager handles adhoc connectivity & login ?? i installed wicd0 but it crashes on startup and not helpful at all ! Screenshot of Chromium page Login page with repeated hotspot ifconfig in my terminal results: krishna@krishna-HP-ENVY-4-Notebook-PC:~$ ifconfig eth0 Link encap:Ethernet HWaddr 28:92:4a:1d:54:fa UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr e0:06:e6:89:fa:49 inet addr:10.24.1.71 Bcast:10.24.1.255 Mask:255.255.255.0 inet6 addr: fe80::e206:e6ff:fe89:fa49/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10940 errors:0 dropped:0 overruns:0 frame:348431 TX packets:6611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7669631 (7.6 MB) TX bytes:864195 (864.1 KB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2146 errors:0 dropped:0 overruns:0 frame:0 TX packets:2146 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:166120 (166.1 KB) TX bytes:166120 (166.1 KB) I wonder why is the wireless configured under eth1 ? I think this is a bug with earlier ubuntu versions, but is this normal in 13.10 or is there a wrong configuration here ? The wireless device in my pc is BCM4313 and i have installed the bcmwl-kernel-sources, wireless-tools to support the device. i also reinstalled the bcmwl-kernel as suggested on broadcom website, via synaptic package manager. Nothing has changed this situation ! I tried booting into liveUSB and then ifconfig results show wireless under wlan0. But then the wireless connects and loads the login page. So is the problem with the device configuration now ? i really want to get this fixed before i start configuring the other stuff like ATI graphics and such on the laptop for overheating.. lack of internet access is too bad a bug for me :P any help is appreciated!

    Read the article

  • No access to Samba shares

    - by koanhead
    I have three shared folders in my local home directory- that is to say, on my Ubuntu desktop's /home/me/. All were set up using "Sharing Options" in Nautilus' right-click menu. The standard "Music" and "Videos" folders are configured identically: the "Guest Access" box is checked, but the "Allow others to create and delete" is not. The third folder, called "shared", is configured to not allow Guest access but to allow others to modify files. I have not altered /etc/samba/smb.conf by hand, I have only used Sharing Options to create and modify these so-called "shares". My roommates have two Windows 7 computers and one Ubuntu Netbook Remix netbook. I have the aforementioned desktop machine and laptop running 10.04. None of these machines can access any of the shares. Attempts to access the Guest shares result in the message \\machine\directory is not accessible. The network name could not be found. This is the error message generated by a VM running Windows 2000. The other Windows machines generate a similar error. The Ubuntu laptop gives the error Unable to mount location: Failed to mount Windows share. Hurrah, once again, for informative error messages. That really helps a lot. When attempting to browse the folder called "shared" from the laptop, I'm confronted with a password dialog. This behavior is the same will all machines I've tried in the situation. On entering my username and password for the account to which the shares belong, the password dialog briefly disappears and is replaced with an identical dialog. No error message, useful or not, appears. When attempting to browse this folder with the VM, the outcome is the same except that the password dialog helpfully states "incorrect username or password". My assumption is that the username and password in question is that of the user which owns the shares. I have tried all other username and password combinations available in this context and the outcome is the same. I would like to be able to share files. Sharing them with Windows machines is a nice feature, or would be if it was available. Really I consider sharing files between two machines with the same version of the same operating system kind of a minimum condition for network usability. Samba last functioned reliably for me more than ten years ago. I have attempted to use it on and off since then with only intermittent success. Oh, and "Personal File Sharing" from the Preferences menu does not result in an entry in Places → Network → my-server. In fact, the old entry "MY-SERVER" goes away and is replaced by "koanhead's public files on my-server", which when I attempt to open it from the laptop gives a "DBus.Error.NoReply: Message did not receive a reply." I know I come here and gripe about Ubuntu a lot, but on the other hand I spend literally hours every day trying to fix things in Ubuntu. It's a good system which aspires to greatness, which is why things like this either Need to work; or Be adequately documented. Ideally both would be the case. Anyway, rant over. Hopefully someone will have some insight on this issue. Thanks all who bother to read this wall o'text for your time.

    Read the article

  • installer can't find partition, but fdisk can find them

    - by pxd
    I'm installing ubuntu 12.04, my system had install 2 system -- winxp and ubuntu 10.10. Now, I want to update ubuntu to 12.04. I use usb disk to install 12.04. But, the installer can't not find my partition in my harddisk. But, the fdisk can find them. Can you help me? How to do? ubuntu@ubuntu:~$ sudo lshw -short H/W path Device Class Description system HP 2230s (NN868PA#AB2) /0 bus 3037 /0/9 memory 64KiB BIOS /0/0 processor Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz /0/0/1 memory 2MiB L2 cache /0/0/3 memory 32KiB L1 cache /0/0/0.1 processor Logical CPU /0/0/0.2 processor Logical CPU /0/2 memory 32KiB L1 cache /0/4 memory 2GiB System Memory /0/4/0 memory SODIMM [empty] /0/4/1 memory 2GiB SODIMM DDR2 Synchronous 800 MHz (1.2 ns) /0/100 bridge Mobile 4 Series Chipset Memory Controller Hub /0/100/2 display Mobile 4 Series Chipset Integrated Graphics Controller /0/100/2.1 display Mobile 4 Series Chipset Integrated Graphics Controller /0/100/1a bus 82801I (ICH9 Family) USB UHCI Controller #4 /0/100/1a.1 bus 82801I (ICH9 Family) USB UHCI Controller #5 /0/100/1a.2 bus 82801I (ICH9 Family) USB UHCI Controller #6 /0/100/1a.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #2 /0/100/1b multimedia 82801I (ICH9 Family) HD Audio Controller /0/100/1c bridge 82801I (ICH9 Family) PCI Express Port 1 /0/100/1c.1 bridge 82801I (ICH9 Family) PCI Express Port 2 /0/100/1c.1/0 wlan1 network PRO/Wireless 5100 AGN [Shiloh] Network Connection /0/100/1c.2 bridge 82801I (ICH9 Family) PCI Express Port 3 /0/100/1c.4 bridge 82801I (ICH9 Family) PCI Express Port 5 /0/100/1c.5 bridge 82801I (ICH9 Family) PCI Express Port 6 /0/100/1c.5/0 eth1 network 88E8072 PCI-E Gigabit Ethernet Controller /0/100/1d bus 82801I (ICH9 Family) USB UHCI Controller #1 /0/100/1d.1 bus 82801I (ICH9 Family) USB UHCI Controller #2 /0/100/1d.2 bus 82801I (ICH9 Family) USB UHCI Controller #3 /0/100/1d.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #1 /0/100/1e bridge 82801 Mobile PCI Bridge /0/100/1f bridge ICH9M LPC Interface Controller /0/100/1f.2 scsi0 storage 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] /0/100/1f.2/0 /dev/sda disk 500GB WDC WD5000BEVT-0 /0/100/1f.2/0/1 /dev/sda1 volume 48GiB Windows NTFS volume /0/100/1f.2/0/2 /dev/sda2 volume 416GiB Extended partition /0/100/1f.2/0/2/5 /dev/sda5 volume 97GiB HPFS/NTFS partition /0/100/1f.2/0/2/6 /dev/sda6 volume 198GiB HPFS/NTFS partition /0/100/1f.2/0/2/7 /dev/sda7 volume 27GiB Linux filesystem partition /0/100/1f.2/0/2/8 /dev/sda8 volume 93GiB Linux filesystem partition /0/100/1f.2/1 /dev/cdrom disk CDDVDW TS-L633M /0/1 scsi6 storage /0/1/0.0.0 /dev/sdb disk 15GB STORAGE DEVICE /0/1/0.0.0/0 /dev/sdb disk 15GB /0/1/0.0.0/0/1 /dev/sdb1 volume 14GiB Windows FAT volume /1 power HZ04037 ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x31263125 Device Boot Start End Blocks Id System /dev/sda1 * 63 102277727 51138832+ 7 HPFS/NTFS/exFAT /dev/sda2 102277728 976784129 437253201 f W95 Ext'd (LBA) /dev/sda5 102277791 307078127 102400168+ 7 HPFS/NTFS/exFAT /dev/sda6 307078191 724141151 208531480+ 7 HPFS/NTFS/exFAT /dev/sda7 724142080 781459455 28658688 83 Linux /dev/sda8 781461504 976771071 97654784 83 Linux Disk /dev/sdb: 15.9 GB, 15931539456 bytes 64 heads, 32 sectors/track, 15193 cylinders, total 31116288 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009eb92 Device Boot Start End Blocks Id Systemfile:///home/ubuntu/Pictures/Screenshot%20from%202012-07-07%2010:25:40.png /dev/sdb1 * 32 31115263 15557616 c W95 FAT32 (LBA) ubuntu 12.04 installer can't find the partition in my hard disk, only find device - /dev/sda.(sorry, I'm new user, so can't send image.)

    Read the article

  • No access to Samba shares

    - by koanhead
    I have three shared folders in my local home directory- that is to say, on my Ubuntu desktop's /home/me/. All were set up using "Sharing Options" in Nautilus' right-click menu. The standard "Music" and "Videos" folders are configured identically: the "Guest Access" box is checked, but the "Allow others to create and delete" is not. The third folder, called "shared", is configured to not allow Guest access but to allow others to modify files. I have not altered /etc/samba/smb.conf by hand, I have only used Sharing Options to create and modify these so-called "shares". My roommates have two Windows 7 computers and one Ubuntu Netbook Remix netbook. I have the aforementioned desktop machine and laptop running 10.04. None of these machines can access any of the shares. Attempts to access the Guest shares result in the message \\machine\directory is not accessible. The network name could not be found. This is the error message generated by a VM running Windows 2000. The other Windows machines generate a similar error. The Ubuntu laptop gives the error Unable to mount location: Failed to mount Windows share. Hurrah, once again, for informative error messages. That really helps a lot. When attempting to browse the folder called "shared" from the laptop, I'm confronted with a password dialog. This behavior is the same will all machines I've tried in the situation. On entering my username and password for the account to which the shares belong, the password dialog briefly disappears and is replaced with an identical dialog. No error message, useful or not, appears. When attempting to browse this folder with the VM, the outcome is the same except that the password dialog helpfully states "incorrect username or password". My assumption is that the username and password in question is that of the user which owns the shares. I have tried all other username and password combinations available in this context and the outcome is the same. I would like to be able to share files. Sharing them with Windows machines is a nice feature, or would be if it was available. Really I consider sharing files between two machines with the same version of the same operating system kind of a minimum condition for network usability. Samba last functioned reliably for me more than ten years ago. I have attempted to use it on and off since then with only intermittent success. Oh, and "Personal File Sharing" from the Preferences menu does not result in an entry in Places → Network → my-server. In fact, the old entry "MY-SERVER" goes away and is replaced by "koanhead's public files on my-server", which when I attempt to open it from the laptop gives a "DBus.Error.NoReply: Message did not receive a reply." I know I come here and gripe about Ubuntu a lot, but on the other hand I spend literally hours every day trying to fix things in Ubuntu. It's a good system which aspires to greatness, which is why things like this either Need to work; or Be adequately documented. Ideally both would be the case. Anyway, rant over. Hopefully someone will have some insight on this issue. Thanks all who bother to read this wall o'text for your time.

    Read the article

  • BSOD in a Hyper-V Guest VM on install

    - by Greg Hurlman
    I've got Windows Server 2008 R2 running as a development environment, with Hyper-V hosting a few different VMs. I've created a new VM - 4GB of RAM, 2 virtual procs, legacy network adapter, removed the SCSI interface. I'm booting to an ISO image of the Windows Server 2008 R2 DVD, for OS install. The problem is, after the "Windows is loading files" screen, but before the Windows logo animation, I get a blue screen: BAD_SYSTEM_CONFIG_INFO yada yada yada *** STOP: 0x00000074 (etc, etc) I've used this same ISO several times to install to other VMs, no issue.

    Read the article

  • Server cannot set status after HTTP headers have been sent IIS7.5

    - by marcinn
    Hi, Sometimes I get exception in my production environment: Process information Process ID: 3832 Process name: w3wp.exe Account name: NT AUTHORITY\NETWORK SERVICE Exception information Exception type: System.Web.HttpException Exception message: Server cannot set status after HTTP headers have been sent. Request information Request URL: http://www.myulr.pl/logon Request path: /logon User host address: 10.11.9.1 User: user001 Is authenticated: True Authentication Type: Forms Thread account name: NT AUTHORITY\NETWORK SERVICE Thread information Thread ID: 10 Thread account name: NT AUTHORITY\NETWORK SERVICE Is impersonating: False Stack trace: at System.Web.HttpResponse.set_StatusCode(Int32 value) at System.Web.HttpResponseWrapper.set_StatusCode(Int32 value) at System.Web.Mvc.HandleErrorAttribute.OnException(ExceptionContext filterContext) at System.Web.Mvc.ControllerActionInvoker.InvokeExceptionFilters(ControllerContext controllerContext, IList(1) filters, Exception exception) at System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) at System.Web.Mvc.Controller.ExecuteCore() at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__4() at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass1.<MakeVoidDelegate>b__0() at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass8(1).<BeginSynchronous>b__7(IAsyncResult _) at System.Web.Mvc.Async.AsyncResultWrapper.WrappedAsyncResult(1).End() at System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& ompletedSynchronously) I didn't noticed this error on my test environment what should I check? I am using ASP.NET MVC 2 (Release Candidate 2)

    Read the article

  • megacli forceWB

    - by Pascal den Bekker
    We are using a raid controller: LSI Logic / Symbios Logic MegaRAID SAS 2008 But there is no BBU on Board, is there a way to force the WB Cache ?? I tried following: - /opt/MegaRAID/MegaCli/MegaCli64 -LDSetProp CachedBadBBU -L0 -a0 Failed to set Write Cache OK if bad BBU on Adapter 0, VD 0. FW error description: The requested command has invalid arguments. Can anyone help? Cheers, Pascal

    Read the article

  • SCCM 2007 R2 Win 7 Deployment client restarting after WinPE boot

    - by JohnyV
    Hi, I have tried to deploy windows 7 through SCCM, I have it all setup. On the first deployment the PC boots into PXE gets an IP then loads the WinPE. It then shows a starting windows box. The box then disappears and after a few seconds the computer restarts. Any Ideas? Which logs should I be checking I have also tried to inject the drivers for that PCs network adapter but this didnt work.

    Read the article

  • Socket error 10052 on UDP socket

    - by Jesper
    We have a .NET 2.0 desktop application which sends and receives network packets over UDP. Several users have reported an occasional socket error 10052 which happens when the code calls socket.BeginReceiveFrom on a the UDP socket. What does this mean? The official MS documentation for socket error 10052 says - quote: "WSAENETRESET (10052) Network dropped connection on reset . The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress. It can also be returned by setsockopt if an attempt is made to set SO_KEEPALIVE on a connection that has already failed." This just doesn't make much sense for a UDP socket since UDP is a connectionless protocol. I know that another close error code 10054 in connection with UDP sockets means that an ICMP message "Port Unreachable" was received, and I am wondering if 10052 might map to another ICMP message? I have googled this for months, read network books, etc. but can't find anything. Please help - what does socket error 10052 on a UDP socket mean? Thanks in advance

    Read the article

  • Eyefinity on HD 5700/5800 Series - 3 monitors setup [closed]

    - by Peter Stegnar
    Possible Duplicate: ATI Radeon 5770 Eyefinity - 3 monitors How to setup Eyefinity to support three monitors on HD 5700/5800 series card? Monitors are connected the following way: DVI-DVI-DisplayPort Currently driver does not allow me to do this. If I click on the third monitor to extended it, I get message to disable other one. Message: I am using DisplayPort adapter to DVI, so I do not have native displayPort monitor. Might be that a problem?

    Read the article

  • Send Email via Google Apps in C#

    - by NateReid
    Hello, I am trying to send a basic email through Google Apps/Gmail using C# (System.Net.Mail/Framework 4) and I am having trouble doing so. I am receiving the following exception: "The operation has timed out." My code is below: //Create the mail message MailMessage mail = new MailMessage(); //Set the addresses mail.From = new MailAddress("[email protected]", "My Name"); mail.To.Add(Email); //Set the subject and bodycontent mail.Subject = "Email Testing"; mail.Body = "This is the body of the email"; //Send the message using the SmtpClient SmtpClient smtp = new SmtpClient(); smtp.EnableSsl = true; smtp.Send(mail); My web.config has the following settings: <smtp from="[email protected]" deliveryMethod="Network"> <network host="smtp.gmail.com" password="password" port="587" userName="[email protected]" /> </smtp> During my troubleshooting I have tried: Using my personal gmail address as well as another from a domain hosted through Google Apps. Using ports 25, 465, and 587 Hard coding the config settings in the c# code instead of using the web.config Sending and telneting from multiple network locations to ensure the firewall/ISP was not blocking it Ensured that POP was enabled in the GMail settings (according to Google this should turn on the ability to send using SMTP) Changing the send from and replyTo address to ensure they match the account (apparently a GMail necessity). I am able to send and receive email fine through the GMail interface for both of my email accounts. I have also tried the settings and solutions offered in Question # 757987 to no avail. Any suggestions would be greatly appreciated. Thanks all.

    Read the article

  • BizTalk server problem

    - by WtFudgE
    Hi, we have a biztalk server (a virtual one (1!)...) at our company, and an sql server where the data is being kept. Now we have a lot of data traffic. I'm talking about hundred of thousands. So I'm actually not even sure if one server is pretty safe, but our company is not that easy to convince. Now recently we have a lot of problems. Allow me to situate in detail, so I'm not missing anything: Our server has 5 applications: One with 3 orchestrations, 12 send ports, 16 receive locations. One with 4 orchestrations, 32 send ports, 20 receive locations. One with 4 orchestrations, 24 send ports, 20 receive locations. One with 47 (yes 47) orchestrations, 37 send ports, 6 receive locations. One with common application with a couple of resources. Our problems have occured since we deployed the applications with the 47 orchestrations. A lot of these orchestrations use assign shapes which use c# code to do the mapping. This is because we use HL7 extensions and this is kind of special, so by using c# code & xpath it was a lot easier to do the mapping because a lot of these schema's look alike. The c# reads in XmlNodes received through xpath, and returns XmlNode which are then assigned again to biztalk messages. I'm not sure if this could be the cause, but I thought I'd mention it. The send and receive ports have a lot of different types: File, MQSeries, SQL, MLLP, FTP. Each of these types have a different host instances, to balance out the load. Our orchestrations use the BiztalkApplication host. On this server also a couple of scripts are running, mostly ftp upload scripts & also a zipper script, which zips files every half an hour in a daily zip and deletes the zip files after a month. We use this zipscript on our backup files (we backup a lot, backups are also on our server), we did this because the server had problems with sending files to a location where there were a lot (A LOT) of files, so after the files were reduced to zips it went better. Now the problems we are having recently are mainly two major problems: Our most important problem is the following. We kept a receive location with a lot of messages on a queue for testing. After we start this receive location which uses the 47 orchestrations, the running service instances start to sky rock. Ok, this is pretty normal. Let's say about 10000, and then we stop the receive location to see how biztalk handles these 10000 instances. Normally they would go down pretty fast, and it does sometimes, but after a while it starts to "throttle", meaning they just stop being processed and the service instances stay at the same number, for example in 30 seconds it goes down from 10000 to 4000 and then it stays at 4000 and it lowers very very very slowly, like 30 in 5minutes or something. So this means, that all the other service instances of the other applications are also stuck in here, and they are also not processed. We noticed that after restarting our host instances the instance number went down fast again. So we tried to selectively restart different host instances to locate the problem. We noticed that eventually restarting the file send/receive host instance would do the trick. So we thought file sends would be the problem. Concidering that we make a lot of backups. So we replaced the file type backups with mqseries backups. The same problem occured, and funny thing, restarting the file send/receive host still fixes the problem. No errors can be found in the event viewer either. A second problem we're having is. That sometimes at arround 6 am, all or a part of the host instances are being stopped. In the event viewer we noticed the following errors (these are more than one): The receive location "MdnBericht SQL" with URL "SQL://ZNACDBPEG/mdnd0001/" is shutting down. Details:"The error threshold has been exceeded. The receive location is shutting down.". The Messaging Engine failed to add a receive location "M2m Othello Export Start Bestand" with URL "\m2mservices\Othello_import$\DataFilter Start*.xml" to the adapter "FILE". Reason: "The FILE adapter cannot access the folder \m2mservices\Othello_import$\DataFilter Start. Verify this folder exists. Error: Logon failure: unknown user name or bad password. ". The FILE adapter cannot access the folder \m2mservices\Othello_import$\DataFilter Start. Verify this folder exists. Error: Logon failure: unknown user name or bad password. An attempt to connect to "BizTalkMsgBoxDb" SQL Server database on server "ZNACDBBTS" failed. Error: "Login failed for user ''. The user is not associated with a trusted SQL Server connection." It woould seem that there's a login failure at this time and that because of it other services are also experiencing problems, and eventually they are shut down. The thing is, our user is admin, and it's impossible that it's password is wrong "sometimes". We have concidering that the problem could be due to an infrastructure problem, but that's not really are department. I know it's a long post, but we're not sure anymore what to do. Would adding another server and balancing the load solve our problems? Is there a way to meassure our balance and know where to start splitting? What are normal numbers of load etc? I appreciate any answers because these issues are getting worse and we're also on a deadline. Thanks a lot for replies!

    Read the article

  • How to share session cookies between Internet Explorer and an ActiveX components hosted in a webpage

    - by jerem
    I am currently working on a .Net application which makes HTTP requests to some web applications hosted on a IIS server. The application is deployed through ClickOnce and is working fine on simple networks architectures. One of our customers has a very complex network involving a custom authentication server on which the user has first to log himself in order to be authenticated and get access to other applications on this network. Once authenticated on this server, a session cookie is created and sent to the user. Every time the user then makes a request on a secured server of the network, this cookie is checked to grant access to the user. If this cookie is not sent with the request, the user is redirected to the login page. The only browser used is Internet Explorer. This cookie cannot be accessed from our .net application since it is executed in another process than the Internet Explorer process which was used to log the user in, and thus is not sent with our requests, which cannot be completed since the server redirects every of our requests to the login page. I had a look at embedding my application into Internet Explorer by making the main control COM visible and creating it on an HTML page with an tag. It is working properly, however the sessions cookies set earlier in the browser are not sent when the ActiveX control makes web requests. I was hoping this sharing of the session information would be automatic (although I didn't really believe it). So my questions are : Is it possible to have access to this cookie in the embedded ActiveX? How? Does it make a difference to use a .Net COM-interop component instead of a "true" ActiveX control? Also, are there specific security words to describe this kind of behaviors (given that I am not an expert at all on security topics, this lack of proper terminology makes it a lot harder to find the needed resources)? My goal is to have my application's requests look the same from the requests made by the host browser's requests, and I thought that embedding the application as an ActiveX control into the browser was the only way to achieve this, however any suggestion on another to do this is welcome.

    Read the article

  • TransactionScope won't work with DB2 provider

    - by Florin
    Hi Everyone, I've been trying to use TransactionScope with a DB2 database (using DB2 .Net provider v 9.0.0.2 and c# 2.0) which SHOULD be supported according to IBM. I have tried all the advice i could find on the IBM forums (such as here) to no avail. I have enabled XA transactions on my XP Sp2 machine, tried also from a Win 2003 Server machine but i consistently get the infamous error: ERROR [58005] [IBM][DB2/NT] SQL0998N Error occurred during transaction or heuristic processing. Reason Code = "16". Subcode = "2-80004005". SQLSTATE=58005 The windows event log says: The XA Transaction Manager attempted to load the XA resource manager DLL. The call to LOADLIBRARY for the XA resource manager DLL failed: DLL=C:\APPS\IBM\DB2v95fp2\SQLLIB\BIN\DB2APP.DLL File=d:\comxp_sp2\com\com1x\dtc\dtc\xatm\src\xarmconn.cpp Line=2467. Also, granted the NETWORK SERVICE user full rights to the folder and dll. Here's the MSDTC startup message MS DTC started with the following settings: Security Configuration (OFF = 0 and ON = 1): Network Administration of Transactions = 0, Network Clients = 0, Inbound Distributed Transactions using Native MSDTC Protocol = 0, Outbound Distributed Transactions using Native MSDTC Protocol = 0, Transaction Internet Protocol (TIP) = 0, XA Transactions = 1 Any help would be much appreciated! Thanks, Florin

    Read the article

  • MySQL performance - 100Mb ethernet vs 1Gb ethernet

    - by Rob Penridge
    Hi All I've just started a new job and noticed that the analysts computers are connected to the network at 100Mbps. The ODBC queries we run against the MySQL server can easily return 500MB+ and it seems at times when the servers are under high load the DBAs kill low priority jobs as they are taking too long to run. My question is this... How much of this server time is spent executing the request, and how much time is spent returning the data to the client? Could the query speeds be improved by upgrading the network connections to 1Gbps? (Updated for the why): The database in question was built to accomodate reporting needs and contains massive amounts of data. We usually work with subsets of this data at a granular level in external applications such as SAS or Excel, hence the reason for the large amounts of data being transmitted. The queries are not poorly structured - they are very simple and the appropriate joins/indexes etc are being used. I've removed 'query' from the Title of the post as I realised this question is more to do with general MySQL performance rather than query related performance. I was kind of hoping that someone with a Gigabit connection may be able to actually quantify some results for me here by running a query that returns a decent amount of data, then they could limit their connection speed to 100Mb and rerun the same query. Hopefully this could be done in an environment where loads are reasonably stable so as not to skew the results. If ethernet speed can improve the situation I wanted some quantifiable results to help argue my case for upgrading the network connections. Thanks Rob

    Read the article

  • How to use a DVI/HDMI monitor with Mac Mini's DisplayPort?

    - by dr dork
    If I buy a Mac Mini, how can I use it with my Dell monitor? The Dell does not have a DisplayPort, only DVI and HDMI. I was looking at the Mac Minis and noticed they don't have DVI or VGA ports. Does the Mac Mini come with any kind of an adapter that will allow me to use my existing Dell monitor? Thanks in advance for your help, I'm going to start researching this question right now.

    Read the article

< Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >