Search Results

Search found 11050 results on 442 pages for 'video cards'.

Page 336/442 | < Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >

• HP UX can not boot from Ignite Tape

  - by Spirit

  We have hp rp2470 server running hp-ux 11.00, with LVM mirroring. As for redundancy we have second rp2470 same hw (same two processors, same ram, same two hdd’s, same number of lan cards). I want to clone first one to the second. For that purpose I am making ignite tape with the following command: make_tape_recovery -x inc_entire=vg00 Ignite tape finishes without problems. When I boot second server from this ignate tape, server is starting to boot, and ignite restore finishes without any errors, only few notes, which are normal. However vmunix is not booting and when restore finishes, it boot to ISL prompt. From this I cannot boot /stand/vmunix. I tried to run recovery shell but no success. When recovery shell ask to do frecover to restore critical files, then I receive error: frecover(5405): unable to open /dev/rmt/0m At first I thought that the problem might be in the difference of the firmware version of the servers: fw version of production server is: Firmware Version 43.50 and fw version of backup server is: Firmware Version 42.19 So i did a fw upgrade of my backup server so that both servers are v43.50, and tried a recovery but again cant boot the system. Next I did another archive tape with -I (Interactive) flag: make_tape_recovery -I -x inc_entire=vg00 and tried recovery with it, again no good. I cannot find any error or warnings on ignite log, and I cannot boot hpux. I am only on ISL prompt. This is what i've noticed on the gsp logs: ************* SYSTEM ALERT ************** SYSTEM NAME: mcnfwim1 DATE: 07/27/2003 TIME: 10:18:49 ALERT LEVEL: 6 = Boot possible, pending failure - action required REASON FOR ALERT SOURCE: 8 = I/O SOURCE DETAIL: 6 = disk SOURCE ID: 0 PROBLEM DETAIL: 0 = no problem detail LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH OFF ON ON ON LED State: Boot Failed. Running non-OS code. Check Chassis and Console Logs for error messages. 0x00000060860010B0 00000000 00000000 - type 0 = Data Field Unused 0x58000860860010B0 00006706 1B0A1231 - type 11 = Timestamp 07/27/2003 10:18:49 And another gsp log: Log Entry # 3 : SYSTEM NAME: mcnfwim1 DATE: 07/27/2003 TIME: 10:12:20 ALERT LEVEL: 6 = Boot possible, pending failure - action required SOURCE: 8 = I/O SOURCE DETAIL: 6 = disk SOURCE ID: 0 PROBLEM DETAIL: 0 = no problem detail CALLER ACTIVITY: 1 = test STATUS: 0 CALLER SUBACTIVITY: 0B = implementation dependent REPORTING ENTITY TYPE: 0 = system firmware REPORTING ENTITY ID: 00 0x00000060860010B0 00000000 00000000 type 0 = Data Field Unused 0x58000860860010B0 00006706 1B0A0C14 type 11 = Timestamp 07/27/2003 10:12:20 Type CR for next entry, - CR for previous entry, Q CR to quit. Please note that I can not change anything on the production server. I can only make changes to the backup server. Any help is appreciated.

  Read the article

• nVidia driver is not installed for x64 Windows 7 (Vaio VGN-SZ460N)

  - by Sergey Osypchuk

  I just upgraded memory to 4GB for Sony Vaio VGN-SZ460N laptop and trying to install Windows 7 x64. All works fine with default drivers, except video - I am not able to set resolution more than 1024x768. Technical specification says that this model is using: Chipset : Intel® 945GM Processor : NVIDIA® GeForce® Go 7400 notebook graphics processing unit (GPU) and Intel® Graphics Media Accelerator 950 I was trying to use Intel 945GM driver, for Windows 7 Ultimate x64 and get error: This computer does not meet the mininum requirements for installing the software Also, I was trying to download nVidia GeForce Go 7400 x64 but it says that there is no compatible hardware. Actually, it has disclaimer that those drivers doesn't work for Sony vaio and recomendation to use OEM website. Sony website has only 32-bit version of driver which says that it cannot be installed and x64 should be used... Any ideas?

  Read the article

• KVM Virtual guest Paused on Reboot

  - by David Hamilton

  I'm running REHL 6 and just installed a Ubuntu Server Guest via KVM set to start at boot. This works correctly and the guest loads, but it loads "paused" and requires that I manually un-pause it. Can someone give me a hint as to how I can I get the Guest OS to actually become active on boot? Here is the libvert dump as requested...Also tried libvert auto-start --- no effect. <domain type='kvm' id='1'> <name>MailServer</name> <uuid>a61dae75-1f5c-d536-718f-3c615d9b4868</uuid> <memory>4194304</memory> <currentMemory>4194304</currentMemory> <vcpu>4</vcpu> <os> <type arch='x86_64' machine='rhel6.0.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source file='/home/MailServer/MailServer-1.img'/> <target dev='hda' bus='ide'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> <alias name='ide0-1-0'/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <alias name='ide0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:cd:f9:9f'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5900' autoport='yes'/> <sound model='ac97'> <alias name='sound0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='cirrus' vram='9216' heads='1'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='selinux'> <label>system_u:system_r:svirt_t:s0:c211,c271</label> <imagelabel>system_u:object_r:svirt_image_t:s0:c211,c271</imagelabel> </seclabel></domain>

  Read the article

• Ubuntu 9.10 x64 has no sound, while Ubuntu 9.04 32 bit does.

  - by Macha

  I installed Ubuntu 9.10 x64 recently. Up until now I've been on 32 bit Ubuntu. For the first time since installing it, I went and tried to play a Youtube video. There was no sound. So a quick test to the system reveals that nothing will play sound (And I've tried turning the volume too full, as some have said output is quite quiet, but there is no sound at all). Further research shows that in sound preferences, the only output device listed was Dummy Output. Why would it work in 9.04 x86 and not 9.10 x64? While booting up, and occasionally with the sound preferences dialog open, I get a loud click (even though it isn't recognising my sound card). It's a Dell Studio 17 laptop. I'm not sure what the exact model of sound card is.

  Read the article

• Disable Recent Items in Jump Lists for Certain Programs

  - by jdecock

  Is there any way to turn off the recent items in the jumplists of specific programs in Windows 7? This feature is useful on some programs (like my text editor) but there are other programs that I don't need everyone to see what I've opened recently (like my video player). I've searched around for a solution to this and I've found two "solutions": Turn off recent items in all jumplists (open the Taskbar and Start Menu Properties and uncheck the "Store and display recently opened items in the Start menu and the taskbar"). Manually clear the recent items history. Neither of these options seem very useful to me. #1 seems like the better solution if you really don't want someone to see your recent documents but then you lose that functionality for all programs instead of just the ones you want while #2 seems like it's something that's way to easy to forget about.

  Read the article

• Monitoring bandwidth/latency/jitter between 2 sites?

  - by TheCleaner

  I have 2 sites connected via an MPLS network and I'd like to do the following: setup a host on each end that can "talk" back and forth between each other and somehow report/log what kind of throughput, jitter, latency, etc. they are experiencing between each other in 5 minute intervals. Something similar to Qcheck but that can be automated. Bottom line is I'm trying to determine if the WAN network is "stable" throughout the day or if something is wrong. We have video conferences between these sites and even at 1024kbps calls we are experiencing delays and jitter. I'm hoping to exonerate the network with some testing.

  Read the article

• Ubuntu Lucid: Erratic screen behaviour after boot

  - by fgysin

  In short: about 50% of the time I have a screwed up monitor setup after reboot. About 50% it is totally correct. Now the longer version: I updated my machine from 9.04 to 10.04 (via 9.10). At first I run into some monitor problems (I have a 3-monitor setup) because of the known bug in the new xserver driver for xinerama. This messes up behaviour if the mouse goes either left or above the screen number 0, i.e. I had to make my left-most monitor screen 0. Everything worked out fine finally, I got my 3-monitor setup back with xinerama enabled to get one big desktop streched over 3 screens. Now the fun part: Every time I start up my machine only one of the 3 monitors gets a signal and is woken up: it only recognizes the left-most monitor (screen 0) and crams all the desktop stuff into this one screen. If I go into nvidia settings I only see one physical device although all 3 are connected and have power. When I look into the xorg.conf I can still see my old setup with 3 devices, 3 screens, xinerama active etc... But I was totally unable to get 3 montitors to work. (I tried unplugging monitors, reconfiguring whole nvidia setup, ...) But it gets even better: When I restart my machine (i.e. choose the restart option from the Ubuntu menu) it shuts down and tries to restart. The restart then gets stuck after showing the Ubuntu splash screen with the 'loading bar' (the moving dots thingy) and I am forced to kill the machine by cutting power. But after the power cut the machine boots up normally and suddenly I get my 3 monitor setup back up working. That is until the next time I shut down and start up, where it all starts over again and I only have one monitor... (see above) I really have a hard time seeing where the error is. It must be that the restart boot somehow differs from the 'normal' boot. But the fact that it gets stuck and I need to cut power which then basically triggers a 'normal' boot does not really support this theory... My setup (please tell me if you need further info): 3 monitors as 3 screens as one desktop (with xinerama) 2 nvidia cards where screen 0 and 1 are on card 0 and screen 2 is on card 1 Ubuntu 10.04 Lucid Lynx (updated from 9.10, 9.04, ....) I would appreciate every idea on the subject, at the moment I really don't have any clue what to do...

  Read the article

• Streaming media from linux server - low footprint is crucial

  - by Mike Haye

  I recently pre-ordered the Raspberry Pi. http://www.raspberrypi.org/faqs For those of you who don't know it, it's a machine with 256 mb ram and a 700 MHz processor for $35. I plan to run linux on an SD card on this machine and have it act as both a htpc, VPN and media server. In regard to the media server part, I need to find some linux software that has a small footprint, but allows me to stream media to other devices connected to the internet (preferably without having to install any additional software on the client machines) Also, I would love if the video could be compressed, so the data usage wouldn't be so big for the client machine (e.g. when I'm using my data plan on my smartphone ;) ) Thanks in advance for any answers :) Mike.

  Read the article

• How to convert .flv file to .3gp using ffmpeg?

  - by Chetana

  I have converted any video format to 3gp file format using ffmpeg on one server. But on another server it not works. Following is my script: exec("ffmpeg -i test.flv -sameq -acodec libmp3lame -ar 22050 -ab 96000 -deinterlace -nr 500 -s 320x240 -aspect 4:3 -r 20 -g 500 -me_range 20 -b 270k -deinterlace -f flv -y test.3gp "); Can anyone tell me what is wrong in script? Following is my ffmpeg setting: root@ninja [~]# ffmpeg -formats ffmpeg version CVS, build 3277056, Copyright (c) 2000-2004 Fabrice Bellard configuration: --enable-mp3lame --enable-libogg --enable-gpl --disable-mmx --enable-shared built on Jun 17 2009 10:51:43, gcc: 4.1.2 20080704 (Red Hat 4.1.2-44)

  Read the article

• Mouse Icon Distorted on Secondary Display

  - by Nathan Taylor

  I have a strange issue with a dual monitor, extended desktop setup where the mouse is always fine on the primary monitor, but sometimes when I move to the secondary display the icon becomes garbled and distorted (sometimes it just looks like a vertical line, instead of a pointer). If I move the mouse back and forth rapidly between primary and secondary displays the level of "garbledness" of the icon will change and sometimes go away completely. If I switch the display settings and set it to "Duplicate Monitor 1" then I end up with a garbled icon on the primary display and an accurate one on the secondary. Very annoying. Computer is Windows 7 Ultimate with an HD8750 and the newest video drivers. Monitors are two Dell 24" displays connected via DVI cables. I have also tried VGA cables.

  Read the article

• Darwin Streaming Server Interval Role

  - by Asmv9

  I want to use the Interval Role in Darwin streaming server,more specifically i want to call the QTSS_SetIntervalRoleTimer() when the server starts streaming a video file.But i have problem in doing this as from what it seems,the method returns QTSS_Err when i do that. I believe that the problem is due to the fact that the callback is made in a a module-created thread. Is there a specific place where this callback must be done?(if i put the callback in the register role of my module it works,but i dont want this,because i dont want the timer starting when the server starts).Any help will be useful,thank u in advance.

  Read the article

• Getting a black laptop screen

  - by Vivek

  I get a black screen when I boot my laptop. The laptop was in sleep mode initially, so when I pressed the power button, it looked as if it woke up from sleep mode, but the screen was blank. So, I held down the power button to force shutdown the laptop and then removed the battery. But after booting the laptop the screen still remains black. The bios/boot screen remains black as well. I have tried connecting it to external hdmi/vga/s-video devices and booting still no go. Windows loads fine, as I can type the password and get the 'Ding', then alt-f4 and shutdown windows. If it helps, the laptop model is Asus G1S-A1. Thanks in advance!

  Read the article

• Windows Experience Index Dropped After Adding Dedicated Graphics Card

  - by Ludo

  I purchased a new PC with a Gigabye Z68X-UD3H-B3. I had a Radeon HD 5450 graphics card spare, so I've added that instead of using the onboard graphics as I just presumed it would be better. But, my windows experience index has gone down. From 5.4 to 5. Dekstop Performance has dropped from 5.4 to 5, although gaming graphics has gone up from 5.9 to 6.2. I'm not actually going to be using the machine for gaming, just audio production, but I added the card as I'll possibly be doing video editing in future too. Why would this be? Can I trust windows experience index scores? Or is it possible the onboard stuff is just better for general desktop stuff? Thanks! Ludo.

  Read the article

• Secondary Monitor won't Display at Full Resolution with Primary Display Disconnected

  - by Laramie

  I have had a bad day. Among today's events, the LCD display on my Dell E6500 notebook failed. It had been working with a secondary monitor connected through a VGA cable at 1600x900 resolution until I removed the LCD from my notebook for repair. Now the max resolution available on the secondary display is 1024x768. If I reconnect the burned out primary display, the secondary monitor is again available at 1600x900. The video card is an onboard Mobil Intel 4. How can I maintain the secondary display at 1600x900 with the primary display disconnected (for repair)? Edit: I just noticed that when Windows boots, it displays at the correct resolution and I can see my desktop in all its glory for a couple seconds then reverts to 1024x768.

  Read the article

• Why does unpartitioned Hitachi HDS5C3020 drive start consuming 50% more power 15 minutes after boot?

  - by Pro Backup

  In a Debian 6.0.6 system there are 74 pieces of 2TB Toshiba DT01ABA200 drives. These drives are identified as Hitachi HDS5C3020BLE630 drives running firmware revision MZ4OAAB0. 64 Drives attached via HP SAS expander cards to an LSI 2008 SAS controller, another 5 drives are connected directly to the mainboard, 4 drives are connected to a Sil based PCI controller and last 1 drive is only powered and has no data cable connected. The controller LSI and Sil card's their onboard BIOS are both disabled and the mpt2sas and sata_sil modules are removed from the Linux debian 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux kernel. The mpt2sas module is loaded after boot using a modprobe command in /etc/rc.local. These 74 drives are not partitioned, neither formatted and also not mounted. The system consumes: with 0 drives: 70.6 - 70.9 Watt (also 15 minutes after boot); with 74 drives: 330 - 360 Watt, just after boot (is equivalent to 3.5 - 3.9W per drive in idle state); with 74 drives: 420 - 466 Watt, each time in the 15th minute of uptime (is equivalent to 4.7 - 5.3W per drive in idle state). The drive specification lists 4.7W as read/write, and 3.3W as idle power consumption. The increased power consumption is most likely on the 5V line, because after roughly 1 minute an "over current protection" (OCP) of the power supply (PSU) shuts down the power. The used PSU is a single rail model with an OCP of 122A on the 12V line and 55A on the 5V line. Regression: It doesn't matter whether the drive its APM value is set to disabled or 1 (maximum power saving). The operating system records no read/write activity in /proc/diskstats. The values there are identical (28 read, 0 write operations) as immediately after the modprobe operation. Can't test what happens when booting into the mainboard it's BIOS - to exclude any OS intervention - because the Super Micro X8SI6-F mainboard running firmware 06/27/12 has a bug that incorrectly reads a +74.0 C CPU sensor temperature as "High" in BIOS mode, and shuts down the power after 1 minute. What might be causing the drive read/write activity on all drives in the 15th minute after boot and how to prevent it from happening?

  Read the article

• How can I convert videos for Sony Xperia U on my Linux box?

  - by Konstantin

  I would like to send a few videos for my girlfriend, but I would ensure they are playable on her mobile phone. I want to carry out the encoding tasks on my Arch Linux box, because my PC is a low end. I can use only ffmpeg or mencoder or other CLI tool. She can play youtube videos but I don't want to upload such videos to youtube. Are there any presets for specific mobile phones? And when she simply clicks a video direct link will it play directly on the cellphone or should I embed it in a html5 / flash player, like on youtube?

  Read the article

• Laptop monitor goes black under intense graphics

  - by drahcir

  I have a dell inspiron 1520 with a nvidia GeForce 8600M GT video card. I have Windows 7 professional as an operating system. Yesterday when I was using it the screen started to somewhat flicker then go completely black. I restarted it and in the boot screen everything seems fine, when I entered the login screen it became flickery again, and when I logged in, when a couple of windows popped up it went black again. I hooked it up to a tft monitor and the monitor works fine, and did some more tests that confirmed that under higher graphics causes the laptop monitor to go black. Is there a reason why this is happening?

  Read the article

• Computer freezes for 2+ seconds, mouse still moves

  - by xsaero00

  I have this problem on my workstation. The computer would effectively freeze for 2-5 seconds for no apparent reason, then continue as normal. While frozen the mouse would still be movable, but only on one of screens in my multi-screen setup. What can be the likely cause. System: CPU: i7-920 Memory: 12G of Patriot DDR3, 6 modules OS: SLED 11, Suse Linux Enterprise Desktop, using Gnome Main board: Asus P6T Video: two Nvidia 9500GT connected to three displays I am using memory at recommended settings of 8-8-8-1333. It has an XMP profile. Th CPU is a bit overclocked to 3.3 GHz, but my cooling more than allows for it. I ran the computer with all overclocks off and lower memory speed but the issue was still there. Any ideas? Where should I start looking?

  Read the article

• HP proliant dl360 g5 fails to reboot

  - by user1039384

  Some history of this also available here. As of my latest update on the forum linked above, now cold reboot as well as hard reset and following boot for my proliant dl360 g5 works as expected and successfully boot the system. However, soft-reboot results in internal health indicator turning RED on the front and long beeps every around 6seconds until I either cold reboot or press and hold the power button. A summary of system state when this happens: Internal Health led indicator: RED External Health led indicator: Green No led next to any component is red or amber No POST message neither on the video output nor on IML logs (verified both at the time issue occures and after cold reboot that boots the system successfully). Any thoughts please share. I hope we can knock this issue down together with your help!

  Read the article

• I can not watch any videos on youtube

  - by hamed

  I can not watch any videos on Youtube with any browser ( Chrome 20 , Firefox 13 , IE 8 ). I get this error An error accurred. Please try again later. My OS is Windows 7 (32bit) and the antivirus is zonealarm extreme security 10.1.079.000 . I installed flash player 11 but no success. I exited zone alarm to watch video, but no success again and error is the same. I don't know what's the problem . I searched a lot but didn't find the problem. I'd appreciate any idea.

  Read the article

• upgrading my computer system for office use

  - by denise ellul

  Presently I have the under-mentioned computer system. What should be changed and upgraded with the following products that I own presently? I am interested in performance issues related to cache memory, bus speed, RAM, CAS latency as well as other considerations. Thanks for your help. Processor (CPU): Intel Celeron Dual Core E3300 2.5 GHz Motherboard: Asus P5QPL-AM G41 Main Memory (RAM): 2 GB Team Elite DDR2 PC8000 Case: Coolermaster RC330 Power Supply Unit: 500W EZ-Cool Standard Storage Device (Hard Drive): 500GB Samsung Video Card: Intel GMA X4500 (On-board) Optical Drive: LG GH22NS50 Sound Card: AC 97 (On – board) Card Reader: Akasa Black TFT Monitor: 19” View Sonic Speakers: Logitech S120 2.0

  Read the article

• How can I take browser screenshots at a higher resolution than my browser supports?

  - by Joshua Carmody

  I need to take a screenshot of a website as it would appear on a very high resolution monitor... say 4000x3000 pixels. My laptop's screen has a native resolution of 1400x768. Basically, I need to simulate having a monitor resolution much higher than my monitor and video card actually supports. I want the screenshot of the site to look pretty much how it does when you hit CTRL MINUS (zoom out) in Firefox repeatedly, but without any loss of pixels due to scaling. How can I do this? Is there some way to use virtual machine software to simulate a super-high-res display? If not, is there some way to open a browser window bigger than the screen, and then capture its contents as a PNG somehow? Anything else that might work?

  Read the article

• Why is awstats reporting my static IP instead of Domain Name?

  - by Austin

  In AWStats under: "Links from an external page (other web sites except search engines)" it has generated a list of pages that had linked to my page. I see pages like: Bing, YouTube, HotFrog, etc.. However, there are many internal links within the pages. Towards the bottom it is reporting as followed: http://72.249.150.9/distributors.php 5 2.4 % http://72.249.150.9/contact/ 5 2.4 % http://72.249.150.9/catalog/ 4 1.9 % http://72.249.150.9/flex-point-hockey-grip.php 5 2.4 % http://72.249.150.9/sticky-grip-foam.php 5 2.4 % http://72.249.150.9/video.php 10 4.8 % http://72.249.150.9/dealers/ 5 2.4 % http://72.249.150.9/feedback/ 5 2.4 % http://72.249.150.9/products.php 10 4.8 % http://72.249.150.9/ergo-hockey-grip.php 5 2.4 %

  Read the article

• Chrome: Black Screen of Death

  - by davidsinjaya

  I dont know when it started to happen. The screen will turn into full black when a page include javascript (I think so). I cannot open Youtube videos, but I can still see the source code and the pointer to find links and buttons and I can hear the sound of video. I have tried to clear my cache and reinstalled to the latest version, but nothing seems work. Moreover, I have disabled the Pepperflash Player as well, but it did not help. This my chrome version Google Chrome 22.0.1229.79 (Official Build 158531) OS Windows WebKit 537.4 (@129177) JavaScript V8 3.12.19.11 Flash 11.3.31.331 Please help.

  Read the article

• How to install missing Sound Drivers in Ubuntu?

  - by Sakamoto Kazuma

  I seem to be missing drivers for my Gateway laptop MA7. I have looked in System-Admin-Hardware Drivers, but it does not show up in there.There are also no devices listed in Sound-Hardware. I'm guessing at this point that I don't have the driver installed. However, I get the following output: admin@machine001:~$ cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xd8240000 irq 22 admin@machine001:~$ And my lspci shows: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14) 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) 04:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 04:09.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 04:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) I have also checked alsamixer, and nothing is muted. No headphones plugged into headphone jack either. So the question now is, how do I get sound to work on my laptop? It doesn't work for any application.

  Read the article

< Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >