complete guide to irm - Page 337

ec2 spot instance for daily processing task

- by chaft

I don't have much experience as a sysadmin or with amazon aws, so I hope someone can explain in simple terms or refer me to a good guide on how to achieve the below. I have a system running on ec2 and amazon rds getting data in and saving it to the db. I need to run a script once a day (at the end of the day) to process all that data and prepare a daily report. This process will take approximately an hour to run. It needs to run on a high memory instance.. From what i've read so far, I guess the best way to do it is to have a high memory spot instance run every day, set it up to execute the script on startup and and shut down when done. Is that the right way to do it? If so, how to do it? how to tell the spot instance to run every day? through a cron job on the other server or is there a better way? How to set it up to run the script on startup? through cloudinit? Any help would be appreciated. One last thing, the job is not very time sensitive as long as it runs every day.. thanks

Read the article

Hosting options for data-enabled web application

- by Hertfordian

I am independently developing an asp.net business application with a MySQL database. I currently have a Windows web hosting account which includes MySQL and MS SQL as installed supported options. I am not yet finally committed to using MySQL and I want to keep my options open to evaluate MS SQL and possibly other options such as PostGreSQL later when more of the business logic is in place - my data access layer will handle the database connectivity. The web hosting setup I have now is fine for development purposes, but if in future I want to use, say, PostGreSQL Server, and a level of usage of, say, 10,000 hits per day concentrated in business hours, I'm assuming I'll need a dedicated server. But in that case, should I just install PostGreSQL on the dedicated server, or is best practice to have a separate database server - perhaps locked down so that it can only be accessed through the web server? And supposing it was only 2000 hits a day - how would that change things? I'd appreciate it if anyone could point me in the direction of a useful guide to these sorts of issues. Naturally if I start paying for separate servers, I would like to know exactly why I'm doing it and what the performance issues and thresholds are.

Read the article

Plesk command working in manual script, not in cronjob

- by dsaunier

Hi, In order to install a hosting plan, I use Plesk's commands in SSH as specified in their official guide. When typed directly in SSH (Putty), it works perfectly. The line is as follows with obviously values hard coded when in CLI: /usr/local/psa/bin/domain --create '.$url.' -owner mynamehere -ip '.IP_SERVER_PLESK.' -status enabled -hosting true -hst_type phys -login '.$ftp_user.' -passwd '.$ftp_pw.' -www false -php true -php_safe_mode false -hard_quota 100M I then put that request in a php script that does other things after hosting is installed. Now for the weird part: when calling that script from CLI it also works fine, I do a ./myscript.php and it installs the hosting, then sends emails etc. However after I create a cronjob to have that same script called regularly, then the Plesk command fails. The cronjob is started in Plesk as */15 * * * * /usr/bin/php /home/scripts/myscript.php and it works fine for everything BUT the Plesk hosting install, that returns "Unable to read Control Panel configuration file" and therefore does not install the domain hosting. Still this is the same script that I call manually ! On that server are the PHP used to call a cronjob and the one used in CLI different ? What do I miss, help greatly appreciated ! Regards.

Read the article

Permissions for Multiple User VPS

- by adnymarc

I have a Linode VPS server that I have recently setup and am migrating to from Mediatemple, where I have a VPS managed by Plesk. I dislike the Plesk interface and the mess it makes of a lot of things, but appreciated its ability to allow multiple people access to different domains on a server. I have most everything setup the way I would like it, but am having issues with permissions for my domain directories. I am running Ubuntu 8.04 LTS and Apache 2 as my web server. I have domains successfully located in /var/www/vhosts/domainname.com but have to modify files as root in order to add/change files for the domains. I would like to setup access with the following criteria: Each domain can have a user assigned to it (and allow for the same user to manage multiple domains - could even create symlinks in their home folder to their domains) Certain users will have shell access and may be chrooted to the domain directory they control FTP needs to be setup and able to correctly access the domains so that content editors for each domain can upload/download without permissions issues I am relatively new to linux sysadmin and have searched for a good guide to help solve these issues but haven't been able to find one yet. Thanks in advance for your help.

Read the article

Host to set up postfix to use external smtp server

- by Leo

I have a web server and a mail server. Both have the same domain name except, one points to mywebsite.com and the other is mail.mywebsite.com. They have different IPs. I'm trying to set up postfix on my web server so it uses my mail server as the server that sends e-mails. I followed this guide: http://www.howtoforge.com/postfix_relaying_through_another_mailserver I am getting this error in my logs: Oct 28 02:56:45 mywebsite postfix/smtp[1660]: warning: host mail.mywebsite.com[xxx.xxx.xx.xx]:25 greeted me with my own hostname mywebsite.com Oct 28 02:56:46 mywebsite postfix/smtp[1660]: warning: host mail.mywebsite.com[xxx.xxx.xx.xx]:25 replied to HELO/EHLO with my own hostname mywebsite.com I've searched around and I read that you can't use the same hostname when relaying to a separate smtp server. Is there a work around for this? Do I need to set up my mail server with a separate domain name? Also I have my MX records set up for both mywebsite.com and mail.mywebsite.com. I'm not that experienced with this so if I need to give more info let me know. Thanks!

Read the article

How do I get Tomcat 7 to start up faster in Linux CentOS kernel version 2.6.18?

- by user1786833

I am experiencing a problem with slow start up times for Tomcat 7. I have done some testing by tweaking configuration parameters both on Linux CentOS kernel version 2.6.18 and on Windows 7 using this link as my primary guide: http://wiki.apache.org/tomcat/HowTo/FasterStartUp and managed only a modest improvement. The improvements seemed to result when I added metadata-complete="true" attribute to the element of my WEB-INF/web.xml file and when I added the names of almost all the jars we use for our application to the tomcat.util.scan.DefaultJarScanner.jarsToSkip property in conf/catalina.properties file. I've also used this JAVA_OPTS in the setenv.sh file: JAVA_OPTS="$JAVA_OPTS -server -Xms1536m -Xmx1536m -XX:MaxPermSize=256m -XX:NewRatio=2 -XX:+UseParallelGC -XX:ParallelGCThreads=2 -Dsun.rmi.dgc.client.gcInterval=1800000 -Dsun.rmi.dgc.server.gcInterval=1800000 -Dorg.apache.jasper.runtime.BodyContentImpl.LIMIT_BUFFER=true " but actually saw my start up times increase slightly. Our QA and production environments are on Linux CentOS so I'm hoping to get more information on improving Tomcat 7 start up times in that environment. My primary role is java developer and I don't have much system administration experience so I appreciate any input. Thank you for your time and suggestions.

Read the article

New i7 is slower than old Core 2 Duo? Why? (BIOS programming)

- by DrChase

I've always wondered why the companies who make BIOS' either have terrible engineering psychologists or none at all. But without wasting your time further with random speculative questions, my real question is as follows: Why does my new computer run slower than my old computer? Old Computer: Intel Core 2 Duo CPU @ 3.0 Ghz (stock) 4GB OCZ DDR2 800 RAM Wolfdale E8400 mb nVidia GeForce 8600 GT New Computer: Intel Core i7 920 @ ~3.2 Ghz 6 GB OCZ DDR3 1066 RAM EVGA x58 SLI LE motherboard nVidia GeForce GTX 275 Vista x64 Home Premium on both. "Run slower" is defined as: - poorer FPS performance in the same games, applications - takes longer to start up - general desktop usage (checking email, opening up files, running exe's) is noticeably slower At first I thought I must've not set something up in the BIOS or something. But I have no idea how to set anything in the bios except for "Dummy O.C.", which brought me to ~3.2 Ghz. But beyond that I have no idea. I've been reading stuff about "ram timing" and voltages and the like but I really have no idea about that stuff. I'm a psychologist who has a basic understanding in building his own computers, not a computer scientist. Can someone give me some wisdom that might guide me to the reason my new computer is worse than my older one? I'm sorry if this is a bad question, or not appropriate to SO. I'm just pretty frustrated now and you all have helped me in the past so I figured I'd give it a shot. Thanks for your time.

Read the article

unmanaged VPS account; Beginners questions

- by pesar2

I have a classified website which uses MySQL, PHP, Solr (java) etc etc... I wonder where I should start after purchasing a VPS package from my provider. There are first of all several packages, I am going with Linux because as far as I know it is the most stable system. But I have never used Linux before! What is Ubuntu, and which version of it should I get? Whats 64bit Ubuntu then? How do I install php, javascript, mysql, java and all that? What is debian, do I need it? What is apache, do I need that? And most importantly, what applications do I need, that I must have? (I mean applications which a beginner would never know was needed, what do you recommend?) After getting the vps, how do I even access it? Do I type in some kind of IP into the browser? Or is it by ftp program? How do I access the so called "terminal"? Please guide me, I am completely new to Linux and VPS! Thanks

Read the article

Cannot browse Visual SVN Repositories

- by user1783560

I went through Unable to browse repository after setting visual SVN Server and tried to implement the answer suggested but even the IP address is not solving my problem. I have 1) Turned off firewall 2) Set the directory C:\Program Files (x86)\VisualSVN Server security rights to "full control" for all groups including "Network service" group. 3) Set the directory D:\Repositories security rights to "full control" for most groups including "Network service" group. 4) Tried switching between secure and non-secure connection option in visual svn server manager. 5) Tried different with port numbers. Including 443 (with https) and 80 (http). Also tried giving random ports with/without https. Using computer name/ IP address in the url doesn't help. Windows network diagnostics - Troubleshooting report has following message for me. Security policy settings or firewall settings on this computer might be blocking the connection. = Detected Can someone guide me please? I have spent more than two weeks on this now without any solution. Thanks in advance! I appreciate your responses.

Read the article

schroot build environment setup how to avoid bind-mount home

- by minghua

The recent linux distributions such as Fedora and Ubuntu all use chroot environment to make the build. Because when making the build often it needs to install some special tools, and to install to the existing system. Using chroot avoids making any changes to the host system. To set up such a build environment, the first step is to make a chroot. I'm following the setup guide at https://wiki.debian.org/Schroot [wheezy-test] description=Contains the SPICE program aliases=test type=directory directory=/srv/chroot/test users=jsmith root-groups=root script-config=desktop/config personality=linux preserve-environment=true In the host on my setup the /home is on /dev/mapper. When schroot is entered, the same home is bind-mounted. Is there a way to avoid this? I prefer to use a different /home inside chroot. When changing the type from directory to plain, the binding is not performed. However that also loses /proc, /sys, etc. You'd have to manually bind-mount them. That does not seem to be a good solution. If a simple configuration change is unavailable, any idea where the script is for type=directory? Probably I'll manually modify the script. Thanks in advance for any answers or hints!

Read the article

Using JSON.NET for dynamic JSON parsing

- by Rick Strahl

With the release of ASP.NET Web API as part of .NET 4.5 and MVC 4.0, JSON.NET has effectively pushed out the .NET native serializers to become the default serializer for Web API. JSON.NET is vastly more flexible than the built in DataContractJsonSerializer or the older JavaScript serializer. The DataContractSerializer in particular has been very problematic in the past because it can't deal with untyped objects for serialization - like values of type object, or anonymous types which are quite common these days. The JavaScript Serializer that came before it actually does support non-typed objects for serialization but it can't do anything with untyped data coming in from JavaScript and it's overall model of extensibility was pretty limited (JavaScript Serializer is what MVC uses for JSON responses). JSON.NET provides a robust JSON serializer that has both high level and low level components, supports binary JSON, JSON contracts, Xml to JSON conversion, LINQ to JSON and many, many more features than either of the built in serializers. ASP.NET Web API now uses JSON.NET as its default serializer and is now pulled in as a NuGet dependency into Web API projects, which is great. Dynamic JSON Parsing One of the features that I think is getting ever more important is the ability to serialize and deserialize arbitrary JSON content dynamically - that is without mapping the JSON captured directly into a .NET type as DataContractSerializer or the JavaScript Serializers do. Sometimes it isn't possible to map types due to the differences in languages (think collections, dictionaries etc), and other times you simply don't have the structures in place or don't want to create them to actually import the data. If this topic sounds familiar - you're right! I wrote about dynamic JSON parsing a few months back before JSON.NET was added to Web API and when Web API and the System.Net HttpClient libraries included the System.Json classes like JsonObject and JsonArray. With the inclusion of JSON.NET in Web API these classes are now obsolete and didn't ship with Web API or the client libraries. I re-linked my original post to this one. In this post I'll discus JToken, JObject and JArray which are the dynamic JSON objects that make it very easy to create and retrieve JSON content on the fly without underlying types. Why Dynamic JSON? So, why Dynamic JSON parsing rather than strongly typed parsing? Since applications are interacting more and more with third party services it becomes ever more important to have easy access to those services with easy JSON parsing. Sometimes it just makes lot of sense to pull just a small amount of data out of large JSON document received from a service, because the third party service isn't directly related to your application's logic most of the time - and it makes little sense to map the entire service structure in your application. For example, recently I worked with the Google Maps Places API to return information about businesses close to me (or rather the app's) location. The Google API returns a ton of information that my application had no interest in - all I needed was few values out of the data. Dynamic JSON parsing makes it possible to map this data, without having to map the entire API to a C# data structure. Instead I could pull out the three or four values I needed from the API and directly store it on my business entities that needed to receive the data - no need to map the entire Maps API structure. Getting JSON.NET The easiest way to use JSON.NET is to grab it via NuGet and add it as a reference to your project. You can add it to your project with: PM> Install-Package Newtonsoft.Json From the Package Manager Console or by using Manage NuGet Packages in your project References. As mentioned if you're using ASP.NET Web API or MVC 4 JSON.NET will be automatically added to your project. Alternately you can also go to the CodePlex site and download the latest version including source code: http://json.codeplex.com/ Creating JSON on the fly with JObject and JArray Let's start with creating some JSON on the fly. It's super easy to create a dynamic object structure with any of the JToken derived JSON.NET objects. The most common JToken derived classes you are likely to use are JObject and JArray. JToken implements IDynamicMetaProvider and so uses the dynamic keyword extensively to make it intuitive to create object structures and turn them into JSON via dynamic object syntax. Here's an example of creating a music album structure with child songs using JObject for the base object and songs and JArray for the actual collection of songs:[TestMethod] public void JObjectOutputTest() { // strong typed instance var jsonObject = new JObject(); // you can explicitly add values here using class interface jsonObject.Add("Entered", DateTime.Now); // or cast to dynamic to dynamically add/read properties dynamic album = jsonObject; album.AlbumName = "Dirty Deeds Done Dirt Cheap"; album.Artist = "AC/DC"; album.YearReleased = 1976; album.Songs = new JArray() as dynamic; dynamic song = new JObject(); song.SongName = "Dirty Deeds Done Dirt Cheap"; song.SongLength = "4:11"; album.Songs.Add(song); song = new JObject(); song.SongName = "Love at First Feel"; song.SongLength = "3:10"; album.Songs.Add(song); Console.WriteLine(album.ToString()); } This produces a complete JSON structure: { "Entered": "2012-08-18T13:26:37.7137482-10:00", "AlbumName": "Dirty Deeds Done Dirt Cheap", "Artist": "AC/DC", "YearReleased": 1976, "Songs": [ { "SongName": "Dirty Deeds Done Dirt Cheap", "SongLength": "4:11" }, { "SongName": "Love at First Feel", "SongLength": "3:10" } ] } Notice that JSON.NET does a nice job formatting the JSON, so it's easy to read and paste into blog posts :-). JSON.NET includes a bunch of configuration options that control how JSON is generated. Typically the defaults are just fine, but you can override with the JsonSettings object for most operations. The important thing about this code is that there's no explicit type used for holding the values to serialize to JSON. Rather the JSON.NET objects are the containers that receive the data as I build up my JSON structure dynamically, simply by adding properties. This means this code can be entirely driven at runtime without compile time restraints of structure for the JSON output. Here I use JObject to create a album 'object' and immediately cast it to dynamic. JObject() is kind of similar in behavior to ExpandoObject in that it allows you to add properties by simply assigning to them. Internally, JObject values are stored in pseudo collections of key value pairs that are exposed as properties through the IDynamicMetaObject interface exposed in JSON.NET's JToken base class. For objects the syntax is very clean - you add simple typed values as properties. For objects and arrays you have to explicitly create new JObject or JArray, cast them to dynamic and then add properties and items to them. Always remember though these values are dynamic - which means no Intellisense and no compiler type checking. It's up to you to ensure that the names and values you create are accessed consistently and without typos in your code. Note that you can also access the JObject instance directly (not as dynamic) and get access to the underlying JObject type. This means you can assign properties by string, which can be useful for fully data driven JSON generation from other structures. Below you can see both styles of access next to each other:// strong type instance var jsonObject = new JObject(); // you can explicitly add values here jsonObject.Add("Entered", DateTime.Now); // expando style instance you can just 'use' properties dynamic album = jsonObject; album.AlbumName = "Dirty Deeds Done Dirt Cheap"; JContainer (the base class for JObject and JArray) is a collection so you can also iterate over the properties at runtime easily:foreach (var item in jsonObject) { Console.WriteLine(item.Key + " " + item.Value.ToString()); } The functionality of the JSON objects are very similar to .NET's ExpandObject and if you used it before, you're already familiar with how the dynamic interfaces to the JSON objects works. Importing JSON with JObject.Parse() and JArray.Parse() The JValue structure supports importing JSON via the Parse() and Load() methods which can read JSON data from a string or various streams respectively. Essentially JValue includes the core JSON parsing to turn a JSON string into a collection of JsonValue objects that can be then referenced using familiar dynamic object syntax. Here's a simple example:public void JValueParsingTest() { var jsonString = @"{""Name"":""Rick"",""Company"":""West Wind"", ""Entered"":""2012-03-16T00:03:33.245-10:00""}"; dynamic json = JValue.Parse(jsonString); // values require casting string name = json.Name; string company = json.Company; DateTime entered = json.Entered; Assert.AreEqual(name, "Rick"); Assert.AreEqual(company, "West Wind"); } The JSON string represents an object with three properties which is parsed into a JObject class and cast to dynamic. Once cast to dynamic I can then go ahead and access the object using familiar object syntax. Note that the actual values - json.Name, json.Company, json.Entered - are actually of type JToken and I have to cast them to their appropriate types first before I can do type comparisons as in the Asserts at the end of the test method. This is required because of the way that dynamic types work which can't determine the type based on the method signature of the Assert.AreEqual(object,object) method. I have to either assign the dynamic value to a variable as I did above, or explicitly cast ( (string) json.Name) in the actual method call. The JSON structure can be much more complex than this simple example. Here's another example of an array of albums serialized to JSON and then parsed through with JsonValue():[TestMethod] public void JsonArrayParsingTest() { var jsonString = @"[ { ""Id"": ""b3ec4e5c"", ""AlbumName"": ""Dirty Deeds Done Dirt Cheap"", ""Artist"": ""AC/DC"", ""YearReleased"": 1976, ""Entered"": ""2012-03-16T00:13:12.2810521-10:00"", ""AlbumImageUrl"": ""http://ecx.images-amazon.com/images/I/61kTaH-uZBL._AA115_.jpg"", ""AmazonUrl"": ""http://www.amazon.com/gp/product/…ASIN=B00008BXJ4"", ""Songs"": [ { ""AlbumId"": ""b3ec4e5c"", ""SongName"": ""Dirty Deeds Done Dirt Cheap"", ""SongLength"": ""4:11"" }, { ""AlbumId"": ""b3ec4e5c"", ""SongName"": ""Love at First Feel"", ""SongLength"": ""3:10"" }, { ""AlbumId"": ""b3ec4e5c"", ""SongName"": ""Big Balls"", ""SongLength"": ""2:38"" } ] }, { ""Id"": ""7b919432"", ""AlbumName"": ""End of the Silence"", ""Artist"": ""Henry Rollins Band"", ""YearReleased"": 1992, ""Entered"": ""2012-03-16T00:13:12.2800521-10:00"", ""AlbumImageUrl"": ""http://ecx.images-amazon.com/images/I/51FO3rb1tuL._SL160_AA160_.jpg"", ""AmazonUrl"": ""http://www.amazon.com/End-Silence-Rollins-Band/dp/B0000040OX/ref=sr_1_5?ie=UTF8&qid=1302232195&sr=8-5"", ""Songs"": [ { ""AlbumId"": ""7b919432"", ""SongName"": ""Low Self Opinion"", ""SongLength"": ""5:24"" }, { ""AlbumId"": ""7b919432"", ""SongName"": ""Grip"", ""SongLength"": ""4:51"" } ] } ]"; JArray jsonVal = JArray.Parse(jsonString) as JArray; dynamic albums = jsonVal; foreach (dynamic album in albums) { Console.WriteLine(album.AlbumName + " (" + album.YearReleased.ToString() + ")"); foreach (dynamic song in album.Songs) { Console.WriteLine("\t" + song.SongName); } } Console.WriteLine(albums[0].AlbumName); Console.WriteLine(albums[0].Songs[1].SongName); } JObject and JArray in ASP.NET Web API Of course these types also work in ASP.NET Web API controller methods. If you want you can accept parameters using these object or return them back to the server. The following contrived example receives dynamic JSON input, and then creates a new dynamic JSON object and returns it based on data from the first:[HttpPost] public JObject PostAlbumJObject(JObject jAlbum) { // dynamic input from inbound JSON dynamic album = jAlbum; // create a new JSON object to write out dynamic newAlbum = new JObject(); // Create properties on the new instance // with values from the first newAlbum.AlbumName = album.AlbumName + " New"; newAlbum.NewProperty = "something new"; newAlbum.Songs = new JArray(); foreach (dynamic song in album.Songs) { song.SongName = song.SongName + " New"; newAlbum.Songs.Add(song); } return newAlbum; } The raw POST request to the server looks something like this: POST http://localhost/aspnetwebapi/samples/PostAlbumJObject HTTP/1.1User-Agent: FiddlerContent-type: application/jsonHost: localhostContent-Length: 88 {AlbumName: "Dirty Deeds",Songs:[ { SongName: "Problem Child"},{ SongName: "Squealer"}]} and the output that comes back looks like this: { "AlbumName": "Dirty Deeds New", "NewProperty": "something new", "Songs": [ { "SongName": "Problem Child New" }, { "SongName": "Squealer New" } ]} The original values are echoed back with something extra appended to demonstrate that we're working with a new object. When you receive or return a JObject, JValue, JToken or JArray instance in a Web API method, Web API ignores normal content negotiation and assumes your content is going to be received and returned as JSON, so effectively the parameter and result type explicitly determines the input and output format which is nice. Dynamic to Strong Type Mapping You can also map JObject and JArray instances to a strongly typed object, so you can mix dynamic and static typing in the same piece of code. Using the 2 Album jsonString shown earlier, the code below takes an array of albums and picks out only a single album and casts that album to a static Album instance.[TestMethod] public void JsonParseToStrongTypeTest() { JArray albums = JArray.Parse(jsonString) as JArray; // pick out one album JObject jalbum = albums[0] as JObject; // Copy to a static Album instance Album album = jalbum.ToObject<Album>(); Assert.IsNotNull(album); Assert.AreEqual(album.AlbumName,jalbum.Value<string>("AlbumName")); Assert.IsTrue(album.Songs.Count > 0); } This is pretty damn useful for the scenario I mentioned earlier - you can read a large chunk of JSON and dynamically walk the property hierarchy down to the item you want to access, and then either access the specific item dynamically (as shown earlier) or map a part of the JSON to a strongly typed object. That's very powerful if you think about it - it leaves you in total control to decide what's dynamic and what's static. Strongly typed JSON Parsing With all this talk of dynamic let's not forget that JSON.NET of course also does strongly typed serialization which is drop dead easy. Here's a simple example on how to serialize and deserialize an object with JSON.NET:[TestMethod] public void StronglyTypedSerializationTest() { // Demonstrate deserialization from a raw string var album = new Album() { AlbumName = "Dirty Deeds Done Dirt Cheap", Artist = "AC/DC", Entered = DateTime.Now, YearReleased = 1976, Songs = new List<Song>() { new Song() { SongName = "Dirty Deeds Done Dirt Cheap", SongLength = "4:11" }, new Song() { SongName = "Love at First Feel", SongLength = "3:10" } } }; // serialize to string string json2 = JsonConvert.SerializeObject(album,Formatting.Indented); Console.WriteLine(json2); // make sure we can serialize back var album2 = JsonConvert.DeserializeObject<Album>(json2); Assert.IsNotNull(album2); Assert.IsTrue(album2.AlbumName == "Dirty Deeds Done Dirt Cheap"); Assert.IsTrue(album2.Songs.Count == 2); } JsonConvert is a high level static class that wraps lower level functionality, but you can also use the JsonSerializer class, which allows you to serialize/parse to and from streams. It's a little more work, but gives you a bit more control. The functionality available is easy to discover with Intellisense, and that's good because there's not a lot in the way of documentation that's actually useful. Summary JSON.NET is a pretty complete JSON implementation with lots of different choices for JSON parsing from dynamic parsing to static serialization, to complex querying of JSON objects using LINQ. It's good to see this open source library getting integrated into .NET, and pushing out the old and tired stock .NET parsers so that we finally have a bit more flexibility - and extensibility - in our JSON parsing. Good to go! Resources Sample Test Project http://json.codeplex.com/© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET Web Api AJAX Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

SOA Suite 11g Native Format Builder Complex Format Example

- by bob.webster

This rather long posting details the steps required to process a grouping of fixed length records using Format Builder. If it’s 10 pm and you’re feeling beat you might want to leave this until tomorrow. But if it’s 10 pm and you need to get a Format Builder Complex template done, read on… The goal is to process individual orders from a file using the 11g File Adapter and Format Builder Sample Data =========== 001Square Widget 0245.98 102Triagular Widget 1120.00 403Circular Widget 0099.45 ORD8898302/01/2011 301Hexagon Widget 1150.98 ORD6735502/01/2011 The records are fixed length records representing a number of logical Order records. Each order record consists of a number of item records starting with a 3 digit number, followed by a single Summary Record which starts with the constant ORD. How can this file be processed so that the first poll returns the first order? 001Square Widget 0245.98 102Triagular Widget 1120.00 403Circular Widget 0099.45 ORD8898302/01/2011 And the second poll returns the second order? 301Hexagon Widget 1150.98 ORD6735502/01/2011 Note: if you need more than one order per poll, that’s also possible, see the “Multiple Messages” field in the “File Adapter Step 6 of 9” snapshot further down. To follow along with this example you will need - Studio Edition Version 11.1.1.4.0 with the - SOA Extension for JDeveloper 11.1.1.4.0 installed Both can be downloaded from here: http://www.oracle.com/technetwork/middleware/soasuite/downloads/index.html You will not need a running WebLogic Server domain to complete the steps and Format Builder tests in this article. Start with a SOA Composite containing a File Adapter The Format Builder is part of the File Adapter so start by creating a new SOA Project and Composite. Here is a quick summary for those not familiar with these steps - Start JDeveloper - From the Main Menu choose File->New - In the New Gallery window that opens Expand the “General” category and Select the Applications node. Then choose SOA Application from the Items section on the right. Finally press the OK button. - In Step 1 of the “Create SOA Application wizard” that appears enter an Application Name and an Directory of your choice, then press the Next button. - In Step 2 of the “Create SOA Application wizard”, press the Next button leaving all entries as defaulted. - In Step 3 of the “Create SOA Application wizard”, Enter a composite name of your choice and Press the Finish Button These steps result in a new Application and SOA Project. The SOA Project contains a composite.xml file which is opened and shown below. For our example we have not defined a Mediator or a BPEL process to minimize the steps, but one or the other would eventually be needed to use the File Adapter we are about to create. Drag and drop the File Adapter icon from the Component Pallette onto either the LEFT side of the diagram under “Exposed Services” or the right side under “External References”. (See the Green Circle in the image below). Placing the adapter on the left side would indicate the file being processed is inbound to the composite, if the adapter is placed on the right side then the data is outbound to a file. Note that the same Format Builder definition can be used in both directions. For example we could use the format with a File Adapter on the left side of the composite to parse fixed data into XML, modify the data in our Composite or BPEL process and then use the same Format Builder definition with a File adapter on the right side of the composite to write the data back out in the same fixed data format When the File Adapter is dropped on the Composite the File Adapter Wizard Appears. Skip Past the first page, Step 1 of 9 by pressing the Next button. In Step 2 enter a service name of your choice as shown below, then press Next When the Native Format Builder appears, skip the welcome page by pressing next. Also press the Next button to accept the settings on Step 3 of 9 On Step 4, select Read File and press the Next button as shown below. On Step 5 enter a directory that will contain a file with the input data, then Press the Next button as shown below. In step 6, enter *.txt or another file format to select input files from the input directory mentioned in step 5. ALSO check the “Files contain Multiple Messages” checkbox and set the “Publish Messages in Batches of” field to 1. The value can be set higher to increase the number of logical order group records returned on each poll of the file adapter. In other words, it determines the number of Orders that will be sent to each instance of a Mediator or Composite processing using the File Adapter. Skip Step 7 by pressing the Next button In Step 8 press the Gear Icon on the right side to load the Native Format Builder. Native Format Builder appears Before diving into the format, here is an overview of the process. Approach - Bottom up Assuming an Order is a grouping of item records and a summary record…. - Define a separate Complex Type for each Record Type found in the group. (One for itemRecord and one for summaryRecord) - Define a Complex Type to contain the Group of Record types defined above (LogicalOrderRecord) - Define a top level element to represent an order. (order) The order element will be of type LogicalOrderRecord Defining the Format In Step 1 select “Create new” and “Complex Type” and “Next” In Step two browse to and select a file containing the test data shown at the start of this article. A link is provided at the end of this article to download a file containing the test data. Press the Next button In Step 3 Complex types must be define for each type of input record. Select the Root-Element and Click on the Add Complex Type icon This creates a new empty complex type definition shown below. The fastest way to create the definition is to highlight the first line of the Sample File data and drag the line onto the <new_complex_type> Format Builder introspects the data and provides a grid to define additional fields. Change the “Complex Type Name” to “itemRecord” Then click on the ruler to indicate the position of fixed columns. Drag the red triangle icons to the exact columns if necessary. Double click on an existing red triangle to remove an unwanted entry. In the case below fields are define in columns 0-3, 4-28, 29-eol When the field definitions are correct, press the “Generate Fields” button. Field entries named C1, C2 and C3 will be created as shown below. Click on the field names and rename them from C1->itemNum, C2->itemDesc and C3->itemCost When all the fields are correctly defined press OK to save the complex type. Next, the process is repeated to define a Complex Type for the SummaryRecord. Select the Root-Element in the schema tree and press the new complex type icon Then highlight and drag the Summary Record from the sample data onto the <new_complex_type> Change the complex type name to “summaryRecord” Mark the fixed fields for Order Number and Order Date. Press the Generate Fields button and rename C1 and C2 to itemNum and orderDate respectively. The last complex type to be defined is a type to hold the group of items and the summary record. Select the Root-Element in the schema tree and click the new complex type icon Select the “<new_complex_type>” entry and click the pencil icon On the Complex Type Details page change the name and type of each input field. Change line 1 to be named item and set the Type to “itemRecord” Change line 2 to be named summary and set the Type to “summaryRecord” We also need to indicate that itemRecords repeat in the input file. Click the pencil icon at the right side of the item line. On the Edit Details page change the “Max Occurs” entry from 1 to UNBOUNDED. We also need to indicate how to identify an itemRecord. Since each item record has “.” in column 32 we can use this fact to differentiate an item record from a summary record. Change the “Look Ahead” field to value 32 and enter a period in the “Look For” field Press the OK button to save entry. Finally, its time to create a top level element to represent an order. Select the “Root-Element” in the schema tree and press the New element icon Click on the <new_element> and press the pencil icon. Set the Element Name to “order” and change the Data Type to “logicalOrderRecord” Press the OK button to save the element definition. The final definition should match the screenshot below. Press the Next Button to view the definition source. Press the Test Button to test the definition Press the Green Triangle Icon to run the test. And we are presented with an unwelcome error. The error states that the processor ran out of data while working through the definition. The processor was unable to differentiate between itemRecords and summaryRecords and therefore treated the entire file as a list of itemRecords. At end of file, the “summary” portion of the logicalOrderRecord remained unprocessed but mandatory. This root cause of this error is the loss of our “lookAhead” definition used to identify itemRecords. This appears to be a bug in the Native Format Builder 11.1.1.4.0 Luckily, a simple workaround exists. Press the Cancel button and return to the “Step 4 of 4” Window. Manually add nxsd:lookAhead="32" nxsd:lookFor="." attributes after the maxOccurs attribute of the item element. as shown in the highlighted text below. When the lookAhead and lookFor attributes have been added Press the Test button and on the Test page press the Green Triangle. The test is now successful, the first order in the file is returned by the File Adapter. Below is a complete listing of the Result XML from the right column of the screen above Try running it The downloaded input test file and completed schema file can be used for testing without following all the Native Format Builder steps in this example. Use the following link to download a file containing the sample data. Download Sample Input Data This is the best approach rather than cutting and pasting the input data at the top of the article. Since the data is fixed length it’s very important to watch out for trailing spaces in the data and to ensure an eol character at the end of every line. The download file is correctly formatted. The final schema definition can be downloaded at the following link Download Completed Schema Definition - Save the inputData.txt file to a known location like the xsd folder in your project. - Save the inputData_6.xsd file to the xsd folder in your project. - At step 1 in the Native Format Builder wizard (as shown above) check the “Edit existing” radio button, then browse and select the inputData_6.xsd file - At step 2 of the Format Builder configuration Wizard (as shown above) supply the path and filename for the inputData.txt file. - You can then proceed to the test page and run a test. - Remember the wizard bug will drop the lookAhead and lookFor attributes, you will need to manually add nxsd:lookAhead="32" nxsd:lookFor="." after the maxOccurs attribute of the item element in the LogicalOrderRecord Complex Type. (as shown above) Good Luck with your Format Project

Read the article

Writing Unit Tests for ASP.NET Web API Controller

- by shiju

In this blog post, I will write unit tests for a ASP.NET Web API controller in the EFMVC reference application. Let me introduce the EFMVC app, If you haven't heard about EFMVC. EFMVC is a simple app, developed as a reference implementation for demonstrating ASP.NET MVC, EF Code First, ASP.NET Web API, Domain-Driven Design (DDD), Test-Driven Development (DDD). The current version is built with ASP.NET MVC 4, EF Code First 5, ASP.NET Web API, Autofac, AutoMapper, Nunit and Moq. All unit tests were written with Nunit and Moq. You can download the latest version of the reference app from http://efmvc.codeplex.com/ Unit Test for HTTP Get Let’s write a unit test class for verifying the behaviour of a ASP.NET Web API controller named CategoryController. Let’s define mock implementation for Repository class, and a Command Bus that is used for executing write operations. [TestFixture] public class CategoryApiControllerTest { private Mock<ICategoryRepository> categoryRepository; private Mock<ICommandBus> commandBus; [SetUp] public void SetUp() { categoryRepository = new Mock<ICategoryRepository>(); commandBus = new Mock<ICommandBus>(); } The code block below provides the unit test for a HTTP Get operation. [Test] public void Get_All_Returns_AllCategory() { // Arrange IEnumerable<CategoryWithExpense> fakeCategories = GetCategories(); categoryRepository.Setup(x => x.GetCategoryWithExpenses()).Returns(fakeCategories); CategoryController controller = new CategoryController(commandBus.Object, categoryRepository.Object) { Request = new HttpRequestMessage() { Properties = { { HttpPropertyKeys.HttpConfigurationKey, new HttpConfiguration() } } } }; // Act var categories = controller.Get(); // Assert Assert.IsNotNull(categories, "Result is null"); Assert.IsInstanceOf(typeof(IEnumerable<CategoryWithExpense>),categories, "Wrong Model"); Assert.AreEqual(3, categories.Count(), "Got wrong number of Categories"); } The GetCategories method is provided below: private static IEnumerable<CategoryWithExpense> GetCategories() { IEnumerable<CategoryWithExpense> fakeCategories = new List<CategoryWithExpense> { new CategoryWithExpense {CategoryId=1, CategoryName = "Test1", Description="Test1Desc", TotalExpenses=1000}, new CategoryWithExpense {CategoryId=2, CategoryName = "Test2", Description="Test2Desc",TotalExpenses=2000}, new CategoryWithExpense { CategoryId=3, CategoryName = "Test3", Description="Test3Desc",TotalExpenses=3000} }.AsEnumerable(); return fakeCategories; } In the unit test method Get_All_Returns_AllCategory, we specify setup on the mocked type ICategoryrepository, for a call to GetCategoryWithExpenses method returns dummy data. We create an instance of the ApiController, where we have specified the Request property of the ApiController since the Request property is used to create a new HttpResponseMessage that will provide the appropriate HTTP status code along with response content data. Unit Tests are using for specifying the behaviour of components so that we have specified that Get operation will use the model type IEnumerable<CategoryWithExpense> for sending the Content data. The implementation of HTTP Get in the CategoryController is provided below: public IQueryable<CategoryWithExpense> Get() { var categories = categoryRepository.GetCategoryWithExpenses().AsQueryable(); return categories; } Unit Test for HTTP Post The following are the behaviours we are going to implement for the HTTP Post: A successful HTTP Post operation should return HTTP status code Created An empty Category should return HTTP status code BadRequest A successful HTTP Post operation should provide correct Location header information in the response for the newly created resource. Writing unit test for HTTP Post is required more information than we write for HTTP Get. In the HTTP Post implementation, we will call to Url.Link for specifying the header Location of Response as shown in below code block. var response = Request.CreateResponse(HttpStatusCode.Created, category); string uri = Url.Link("DefaultApi", new { id = category.CategoryId }); response.Headers.Location = new Uri(uri); return response; While we are executing Url.Link from unit tests, we have to specify HttpRouteData information from the unit test method. Otherwise, Url.Link will get a null value. The code block below shows the unit tests for specifying the behaviours for the HTTP Post operation. [Test] public void Post_Category_Returns_CreatedStatusCode() { // Arrange commandBus.Setup(c => c.Submit(It.IsAny<CreateOrUpdateCategoryCommand>())).Returns(new CommandResult(true)); Mapper.CreateMap<CategoryFormModel, CreateOrUpdateCategoryCommand>(); var httpConfiguration = new HttpConfiguration(); WebApiConfig.Register(httpConfiguration); var httpRouteData = new HttpRouteData(httpConfiguration.Routes["DefaultApi"], new HttpRouteValueDictionary { { "controller", "category" } }); var controller = new CategoryController(commandBus.Object, categoryRepository.Object) { Request = new HttpRequestMessage(HttpMethod.Post, "http://localhost/api/category/") { Properties = { { HttpPropertyKeys.HttpConfigurationKey, httpConfiguration }, { HttpPropertyKeys.HttpRouteDataKey, httpRouteData } } } }; // Act CategoryModel category = new CategoryModel(); category.CategoryId = 1; category.CategoryName = "Mock Category"; var response = controller.Post(category); // Assert Assert.AreEqual(HttpStatusCode.Created, response.StatusCode); var newCategory = JsonConvert.DeserializeObject<CategoryModel>(response.Content.ReadAsStringAsync().Result); Assert.AreEqual(string.Format("http://localhost/api/category/{0}", newCategory.CategoryId), response.Headers.Location.ToString()); } [Test] public void Post_EmptyCategory_Returns_BadRequestStatusCode() { // Arrange commandBus.Setup(c => c.Submit(It.IsAny<CreateOrUpdateCategoryCommand>())).Returns(new CommandResult(true)); Mapper.CreateMap<CategoryFormModel, CreateOrUpdateCategoryCommand>(); var httpConfiguration = new HttpConfiguration(); WebApiConfig.Register(httpConfiguration); var httpRouteData = new HttpRouteData(httpConfiguration.Routes["DefaultApi"], new HttpRouteValueDictionary { { "controller", "category" } }); var controller = new CategoryController(commandBus.Object, categoryRepository.Object) { Request = new HttpRequestMessage(HttpMethod.Post, "http://localhost/api/category/") { Properties = { { HttpPropertyKeys.HttpConfigurationKey, httpConfiguration }, { HttpPropertyKeys.HttpRouteDataKey, httpRouteData } } } }; // Act CategoryModel category = new CategoryModel(); category.CategoryId = 0; category.CategoryName = ""; // The ASP.NET pipeline doesn't run, so validation don't run. controller.ModelState.AddModelError("", "mock error message"); var response = controller.Post(category); // Assert Assert.AreEqual(HttpStatusCode.BadRequest, response.StatusCode); } In the above code block, we have written two unit methods, Post_Category_Returns_CreatedStatusCode and Post_EmptyCategory_Returns_BadRequestStatusCode. The unit test method Post_Category_Returns_CreatedStatusCode verifies the behaviour 1 and 3, that we have defined in the beginning of the section “Unit Test for HTTP Post”. The unit test method Post_EmptyCategory_Returns_BadRequestStatusCode verifies the behaviour 2. For extracting the data from response, we call Content.ReadAsStringAsync().Result of HttpResponseMessage object and deserializeit it with Json Convertor. The implementation of HTTP Post in the CategoryController is provided below: // POST /api/category public HttpResponseMessage Post(CategoryModel category) { if (ModelState.IsValid) { var command = new CreateOrUpdateCategoryCommand(category.CategoryId, category.CategoryName, category.Description); var result = commandBus.Submit(command); if (result.Success) { var response = Request.CreateResponse(HttpStatusCode.Created, category); string uri = Url.Link("DefaultApi", new { id = category.CategoryId }); response.Headers.Location = new Uri(uri); return response; } } else { return Request.CreateErrorResponse(HttpStatusCode.BadRequest, ModelState); } throw new HttpResponseException(HttpStatusCode.BadRequest); } The unit test implementation for HTTP Put and HTTP Delete are very similar to the unit test we have written for HTTP Get. The complete unit tests for the CategoryController is given below: [TestFixture] public class CategoryApiControllerTest { private Mock<ICategoryRepository> categoryRepository; private Mock<ICommandBus> commandBus; [SetUp] public void SetUp() { categoryRepository = new Mock<ICategoryRepository>(); commandBus = new Mock<ICommandBus>(); } [Test] public void Get_All_Returns_AllCategory() { // Arrange IEnumerable<CategoryWithExpense> fakeCategories = GetCategories(); categoryRepository.Setup(x => x.GetCategoryWithExpenses()).Returns(fakeCategories); CategoryController controller = new CategoryController(commandBus.Object, categoryRepository.Object) { Request = new HttpRequestMessage() { Properties = { { HttpPropertyKeys.HttpConfigurationKey, new HttpConfiguration() } } } }; // Act var categories = controller.Get(); // Assert Assert.IsNotNull(categories, "Result is null"); Assert.IsInstanceOf(typeof(IEnumerable<CategoryWithExpense>),categories, "Wrong Model"); Assert.AreEqual(3, categories.Count(), "Got wrong number of Categories"); } [Test] public void Get_CorrectCategoryId_Returns_Category() { // Arrange IEnumerable<CategoryWithExpense> fakeCategories = GetCategories(); categoryRepository.Setup(x => x.GetCategoryWithExpenses()).Returns(fakeCategories); CategoryController controller = new CategoryController(commandBus.Object, categoryRepository.Object) { Request = new HttpRequestMessage() { Properties = { { HttpPropertyKeys.HttpConfigurationKey, new HttpConfiguration() } } } }; // Act var response = controller.Get(1); // Assert Assert.AreEqual(HttpStatusCode.OK, response.StatusCode); var category = JsonConvert.DeserializeObject<CategoryWithExpense>(response.Content.ReadAsStringAsync().Result); Assert.AreEqual(1, category.CategoryId, "Got wrong number of Categories"); } [Test] public void Get_InValidCategoryId_Returns_NotFound() { // Arrange IEnumerable<CategoryWithExpense> fakeCategories = GetCategories(); categoryRepository.Setup(x => x.GetCategoryWithExpenses()).Returns(fakeCategories); CategoryController controller = new CategoryController(commandBus.Object, categoryRepository.Object) { Request = new HttpRequestMessage() { Properties = { { HttpPropertyKeys.HttpConfigurationKey, new HttpConfiguration() } } } }; // Act var response = controller.Get(5); // Assert Assert.AreEqual(HttpStatusCode.NotFound, response.StatusCode); } [Test] public void Post_Category_Returns_CreatedStatusCode() { // Arrange commandBus.Setup(c => c.Submit(It.IsAny<CreateOrUpdateCategoryCommand>())).Returns(new CommandResult(true)); Mapper.CreateMap<CategoryFormModel, CreateOrUpdateCategoryCommand>(); var httpConfiguration = new HttpConfiguration(); WebApiConfig.Register(httpConfiguration); var httpRouteData = new HttpRouteData(httpConfiguration.Routes["DefaultApi"], new HttpRouteValueDictionary { { "controller", "category" } }); var controller = new CategoryController(commandBus.Object, categoryRepository.Object) { Request = new HttpRequestMessage(HttpMethod.Post, "http://localhost/api/category/") { Properties = { { HttpPropertyKeys.HttpConfigurationKey, httpConfiguration }, { HttpPropertyKeys.HttpRouteDataKey, httpRouteData } } } }; // Act CategoryModel category = new CategoryModel(); category.CategoryId = 1; category.CategoryName = "Mock Category"; var response = controller.Post(category); // Assert Assert.AreEqual(HttpStatusCode.Created, response.StatusCode); var newCategory = JsonConvert.DeserializeObject<CategoryModel>(response.Content.ReadAsStringAsync().Result); Assert.AreEqual(string.Format("http://localhost/api/category/{0}", newCategory.CategoryId), response.Headers.Location.ToString()); } [Test] public void Post_EmptyCategory_Returns_BadRequestStatusCode() { // Arrange commandBus.Setup(c => c.Submit(It.IsAny<CreateOrUpdateCategoryCommand>())).Returns(new CommandResult(true)); Mapper.CreateMap<CategoryFormModel, CreateOrUpdateCategoryCommand>(); var httpConfiguration = new HttpConfiguration(); WebApiConfig.Register(httpConfiguration); var httpRouteData = new HttpRouteData(httpConfiguration.Routes["DefaultApi"], new HttpRouteValueDictionary { { "controller", "category" } }); var controller = new CategoryController(commandBus.Object, categoryRepository.Object) { Request = new HttpRequestMessage(HttpMethod.Post, "http://localhost/api/category/") { Properties = { { HttpPropertyKeys.HttpConfigurationKey, httpConfiguration }, { HttpPropertyKeys.HttpRouteDataKey, httpRouteData } } } }; // Act CategoryModel category = new CategoryModel(); category.CategoryId = 0; category.CategoryName = ""; // The ASP.NET pipeline doesn't run, so validation don't run. controller.ModelState.AddModelError("", "mock error message"); var response = controller.Post(category); // Assert Assert.AreEqual(HttpStatusCode.BadRequest, response.StatusCode); } [Test] public void Put_Category_Returns_OKStatusCode() { // Arrange commandBus.Setup(c => c.Submit(It.IsAny<CreateOrUpdateCategoryCommand>())).Returns(new CommandResult(true)); Mapper.CreateMap<CategoryFormModel, CreateOrUpdateCategoryCommand>(); CategoryController controller = new CategoryController(commandBus.Object, categoryRepository.Object) { Request = new HttpRequestMessage() { Properties = { { HttpPropertyKeys.HttpConfigurationKey, new HttpConfiguration() } } } }; // Act CategoryModel category = new CategoryModel(); category.CategoryId = 1; category.CategoryName = "Mock Category"; var response = controller.Put(category.CategoryId,category); // Assert Assert.AreEqual(HttpStatusCode.OK, response.StatusCode); } [Test] public void Delete_Category_Returns_NoContentStatusCode() { // Arrange commandBus.Setup(c => c.Submit(It.IsAny<DeleteCategoryCommand >())).Returns(new CommandResult(true)); CategoryController controller = new CategoryController(commandBus.Object, categoryRepository.Object) { Request = new HttpRequestMessage() { Properties = { { HttpPropertyKeys.HttpConfigurationKey, new HttpConfiguration() } } } }; // Act var response = controller.Delete(1); // Assert Assert.AreEqual(HttpStatusCode.NoContent, response.StatusCode); } private static IEnumerable<CategoryWithExpense> GetCategories() { IEnumerable<CategoryWithExpense> fakeCategories = new List<CategoryWithExpense> { new CategoryWithExpense {CategoryId=1, CategoryName = "Test1", Description="Test1Desc", TotalExpenses=1000}, new CategoryWithExpense {CategoryId=2, CategoryName = "Test2", Description="Test2Desc",TotalExpenses=2000}, new CategoryWithExpense { CategoryId=3, CategoryName = "Test3", Description="Test3Desc",TotalExpenses=3000} }.AsEnumerable(); return fakeCategories; } } The complete implementation for the Api Controller, CategoryController is given below: public class CategoryController : ApiController { private readonly ICommandBus commandBus; private readonly ICategoryRepository categoryRepository; public CategoryController(ICommandBus commandBus, ICategoryRepository categoryRepository) { this.commandBus = commandBus; this.categoryRepository = categoryRepository; } public IQueryable<CategoryWithExpense> Get() { var categories = categoryRepository.GetCategoryWithExpenses().AsQueryable(); return categories; } // GET /api/category/5 public HttpResponseMessage Get(int id) { var category = categoryRepository.GetCategoryWithExpenses().Where(c => c.CategoryId == id).SingleOrDefault(); if (category == null) { return Request.CreateResponse(HttpStatusCode.NotFound); } return Request.CreateResponse(HttpStatusCode.OK, category); } // POST /api/category public HttpResponseMessage Post(CategoryModel category) { if (ModelState.IsValid) { var command = new CreateOrUpdateCategoryCommand(category.CategoryId, category.CategoryName, category.Description); var result = commandBus.Submit(command); if (result.Success) { var response = Request.CreateResponse(HttpStatusCode.Created, category); string uri = Url.Link("DefaultApi", new { id = category.CategoryId }); response.Headers.Location = new Uri(uri); return response; } } else { return Request.CreateErrorResponse(HttpStatusCode.BadRequest, ModelState); } throw new HttpResponseException(HttpStatusCode.BadRequest); } // PUT /api/category/5 public HttpResponseMessage Put(int id, CategoryModel category) { if (ModelState.IsValid) { var command = new CreateOrUpdateCategoryCommand(category.CategoryId, category.CategoryName, category.Description); var result = commandBus.Submit(command); return Request.CreateResponse(HttpStatusCode.OK, category); } else { return Request.CreateErrorResponse(HttpStatusCode.BadRequest, ModelState); } throw new HttpResponseException(HttpStatusCode.BadRequest); } // DELETE /api/category/5 public HttpResponseMessage Delete(int id) { var command = new DeleteCategoryCommand { CategoryId = id }; var result = commandBus.Submit(command); if (result.Success) { return new HttpResponseMessage(HttpStatusCode.NoContent); } throw new HttpResponseException(HttpStatusCode.BadRequest); } } Source Code The EFMVC app can download from http://efmvc.codeplex.com/ . The unit test project can be found from the project EFMVC.Tests and Web API project can be found from EFMVC.Web.API.

Read the article

JMS Step 6 - How to Set Up an AQ JMS (Advanced Queueing JMS) for SOA Purposes

- by John-Brown.Evans

JMS Step 6 - How to Set Up an AQ JMS (Advanced Queueing JMS) for SOA Purposes .jblist{list-style-type:disc;margin:0;padding:0;padding-left:0pt;margin-left:36pt} ol{margin:0;padding:0} .c17_6{vertical-align:top;width:468pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c5_6{vertical-align:top;border-style:solid;border-color:#000000;border-width:1pt;padding:0pt 5pt 0pt 5pt} .c6_6{vertical-align:top;width:156pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c15_6{background-color:#ffffff} .c10_6{color:#1155cc;text-decoration:underline} .c1_6{text-align:center;direction:ltr} .c0_6{line-height:1.0;direction:ltr} .c16_6{color:#666666;font-size:12pt} .c18_6{color:inherit;text-decoration:inherit} .c8_6{background-color:#f3f3f3} .c2_6{direction:ltr} .c14_6{font-size:8pt} .c11_6{font-size:10pt} .c7_6{font-weight:bold} .c12_6{height:0pt} .c3_6{height:11pt} .c13_6{border-collapse:collapse} .c4_6{font-family:"Courier New"} .c9_6{font-style:italic} .title{padding-top:24pt;line-height:1.15;text-align:left;color:#000000;font-size:36pt;font-family:"Arial";font-weight:bold;padding-bottom:6pt} .subtitle{padding-top:18pt;line-height:1.15;text-align:left;color:#666666;font-style:italic;font-size:24pt;font-family:"Georgia";padding-bottom:4pt} li{color:#000000;font-size:10pt;font-family:"Arial"} p{color:#000000;font-size:10pt;margin:0;font-family:"Arial"} h1{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:24pt;font-family:"Arial";font-weight:normal} h2{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:18pt;font-family:"Arial";font-weight:normal} h3{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:14pt;font-family:"Arial";font-weight:normal} h4{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:12pt;font-family:"Arial";font-weight:normal} h5{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:11pt;font-family:"Arial";font-weight:normal} h6{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:10pt;font-family:"Arial";font-weight:normal} This post continues the series of JMS articles which demonstrate how to use JMS queues in a SOA context. The previous posts were: JMS Step 1 - How to Create a Simple JMS Queue in Weblogic Server 11g JMS Step 2 - Using the QueueSend.java Sample Program to Send a Message to a JMS Queue JMS Step 3 - Using the QueueReceive.java Sample Program to Read a Message from a JMS Queue JMS Step 4 - How to Create an 11g BPEL Process Which Writes a Message Based on an XML Schema to a JMS Queue JMS Step 5 - How to Create an 11g BPEL Process Which Reads a Message Based on an XML Schema from a JMS Queue This example leads you through the creation of an Oracle database Advanced Queue and the related WebLogic server objects in order to use AQ JMS in connection with a SOA composite. If you have not already done so, I recommend you look at the previous posts in this series, as they include steps which this example builds upon. The following examples will demonstrate how to write and read from the queue from a SOA process. 1. Recap and Prerequisites In the previous examples, we created a JMS Queue, a Connection Factory and a Connection Pool in the WebLogic Server Console. Then we wrote and deployed BPEL composites, which enqueued and dequeued a simple XML payload. AQ JMS allows you to interoperate with database Advanced Queueing via JMS in WebLogic server and therefore take advantage of database features, while maintaining compliance with the JMS architecture. AQ JMS uses the WebLogic JMS Foreign Server framework. A full description of this functionality can be found in the following Oracle documentation Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server 11g Release 1 (10.3.6) Part Number E13738-06 7. Interoperating with Oracle AQ JMS http://docs.oracle.com/cd/E23943_01/web.1111/e13738/aq_jms.htm#CJACBCEJ For easier reference, this sample will use the same names for the objects as in the above document, except for the name of the database user, as it is possible that this user already exists in your database. We will create the following objects Database Objects Name Type AQJMSUSER Database User MyQueueTable Advanced Queue (AQ) Table UserQueue Advanced Queue WebLogic Server Objects Object Name Type JNDI Name aqjmsuserDataSource Data Source jdbc/aqjmsuserDataSource AqJmsModule JMS System Module AqJmsForeignServer JMS Foreign Server AqJmsForeignServerConnectionFactory JMS Foreign Server Connection Factory AqJmsForeignServerConnectionFactory AqJmsForeignDestination AQ JMS Foreign Destination queue/USERQUEUE eis/aqjms/UserQueue Connection Pool eis/aqjms/UserQueue 2. Create a Database User and Advanced Queue The following steps can be executed in the database client of your choice, e.g. JDeveloper or SQL Developer. The examples below use SQL*Plus. Log in to the database as a DBA user, for example SYSTEM or SYS. Create the AQJMSUSER user and grant privileges to enable the user to create AQ objects. Create Database User and Grant AQ Privileges sqlplus system/password as SYSDBA GRANT connect, resource TO aqjmsuser IDENTIFIED BY aqjmsuser; GRANT aq_user_role TO aqjmsuser; GRANT execute ON sys.dbms_aqadm TO aqjmsuser; GRANT execute ON sys.dbms_aq TO aqjmsuser; GRANT execute ON sys.dbms_aqin TO aqjmsuser; GRANT execute ON sys.dbms_aqjms TO aqjmsuser; Create the Queue Table and Advanced Queue and Start the AQ The following commands are executed as the aqjmsuser database user. Create the Queue Table connect aqjmsuser/aqjmsuser; BEGIN dbms_aqadm.create_queue_table ( queue_table = 'myQueueTable', queue_payload_type = 'sys.aq$_jms_text_message', multiple_consumers = false ); END; / Create the AQ BEGIN dbms_aqadm.create_queue ( queue_name = 'userQueue', queue_table = 'myQueueTable' ); END; / Start the AQ BEGIN dbms_aqadm.start_queue ( queue_name = 'userQueue'); END; / The above commands can be executed in a single PL/SQL block, but are shown as separate blocks in this example for ease of reference. You can verify the queue by executing the SQL command SELECT object_name, object_type FROM user_objects; which should display the following objects: OBJECT_NAME OBJECT_TYPE ------------------------------ ------------------- SYS_C0056513 INDEX SYS_LOB0000170822C00041$$ LOB SYS_LOB0000170822C00040$$ LOB SYS_LOB0000170822C00037$$ LOB AQ$_MYQUEUETABLE_T INDEX AQ$_MYQUEUETABLE_I INDEX AQ$_MYQUEUETABLE_E QUEUE AQ$_MYQUEUETABLE_F VIEW AQ$MYQUEUETABLE VIEW MYQUEUETABLE TABLE USERQUEUE QUEUE Similarly, you can view the objects in JDeveloper via a Database Connection to the AQJMSUSER. 3. Configure WebLogic Server and Add JMS Objects All these steps are executed from the WebLogic Server Administration Console. Log in as the webLogic user. Configure a WebLogic Data Source The data source is required for the database connection to the AQ created above. Navigate to domain > Services > Data Sources and press New then Generic Data Source. Use the values:Name: aqjmsuserDataSource JNDI Name: jdbc/aqjmsuserDataSource Database type: Oracle Database Driver: *Oracle’ Driver (Thin XA) for Instance connections; Versions:9.0.1 and later Connection Properties: Enter the connection information to the database containing the AQ created above and enter aqjmsuser for the User Name and Password. Press Test Configuration to verify the connection details and press Next. Target the data source to the soa server. The data source will be displayed in the list. It is a good idea to test the data source at this stage. Click on aqjmsuserDataSource, select Monitoring > Testing > soa_server1 and press Test Data Source. The result is displayed at the top of the page. Configure a JMS System Module The JMS system module is required to host the JMS foreign server for AQ resources. Navigate to Services > Messaging > JMS Modules and select New. Use the values: Name: AqJmsModule (Leave Descriptor File Name and Location in Domain empty.) Target: soa_server1 Click Finish. The other resources will be created in separate steps. The module will be displayed in the list. Configure a JMS Foreign Server A foreign server is required in order to reference a 3rd-party JMS provider, in this case the database AQ, within a local WebLogic server JNDI tree. Navigate to Services > Messaging > JMS Modules and select (click on) AqJmsModule to configure it. Under Summary of Resources, select New then Foreign Server. Name: AqJmsForeignServer Targets: The foreign server is targeted automatically to soa_server1, based on the JMS module’s target. Press Finish to create the foreign server. The foreign server resource will be listed in the Summary of Resources for the AqJmsModule, but needs additional configuration steps. Click on AqJmsForeignServer and select Configuration > General to complete the configuration: JNDI Initial Context Factory: oracle.jms.AQjmsInitialContextFactory JNDI Connection URL: <empty> JNDI Properties Credential:<empty> Confirm JNDI Properties Credential: <empty> JNDI Properties: datasource=jdbc/aqjmsuserDataSource This is an important property. It is the JNDI name of the data source created above, which points to the AQ schema in the database and must be entered as a name=value pair, as in this example, e.g. datasource=jdbc/aqjmsuserDataSource, including the “datasource=” property name. Default Targeting Enabled: Leave this value checked. Press Save to save the configuration. At this point it is a good idea to verify that the data source was written correctly to the config file. In a terminal window, navigate to $MIDDLEWARE_HOME/user_projects/domains/soa_domain/config/jms and open the file aqjmsmodule-jms.xml . The foreign server configuration should contain the datasource name-value pair, as follows: <foreign-server name="AqJmsForeignServer"> <default-targeting-enabled>true</default-targeting-enabled> <initial-context-factory>oracle.jms.AQjmsInitialContextFactory</initial-context-factory> <jndi-property> <key> datasource </key> <value> jdbc/aqjmsuserDataSource </value> </jndi-property> </foreign-server> </weblogic-jms> Configure a JMS Foreign Server Connection Factory When creating the foreign server connection factory, you enter local and remote JNDI names. The name of the connection factory itself and the local JNDI name are arbitrary, but the remote JNDI name must match a specific format, depending on the type of queue or topic to be accessed in the database. This is very important and if the incorrect value is used, the connection to the queue will not be established and the error messages you get will not immediately reflect the cause of the error. The formats required (Remote JNDI names for AQ JMS Connection Factories) are described in the section Configure AQ Destinations of the Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server document mentioned earlier. In this example, the remote JNDI name used is XAQueueConnectionFactory because it matches the AQ and data source created earlier, i.e. thin with AQ. Navigate to JMS Modules > AqJmsModule > AqJmsForeignServer > Connection Factories then New.Name: AqJmsForeignServerConnectionFactory Local JNDI Name: AqJmsForeignServerConnectionFactory Note: this local JNDI name is the JNDI name which your client application, e.g. a later BPEL process, will use to access this connection factory. Remote JNDI Name: XAQueueConnectionFactory Press OK to save the configuration. Configure an AQ JMS Foreign Server Destination A foreign server destination maps the JNDI name on the foreign JNDI provider to the respective local JNDI name, allowing the foreign JNDI name to be accessed via the local server. As with the foreign server connection factory, the local JNDI name is arbitrary (but must be unique), but the remote JNDI name must conform to a specific format defined in the section Configure AQ Destinations of the Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server document mentioned earlier. In our example, the remote JNDI name is Queues/USERQUEUE , because it references a queue (as opposed to a topic) with the name USERQUEUE. We will name the local JNDI name queue/USERQUEUE, which is a little confusing (note the missing “s” in “queue), but conforms better to the JNDI nomenclature in our SOA server and also allows us to differentiate between the local and remote names for demonstration purposes. Navigate to JMS Modules > AqJmsModule > AqJmsForeignServer > Destinations and select New.Name: AqJmsForeignDestination Local JNDI Name: queue/USERQUEUE Remote JNDI Name:Queues/USERQUEUE After saving the foreign destination configuration, this completes the JMS part of the configuration. We still need to configure the JMS adapter in order to be able to access the queue from a BPEL processt. 4. Create a JMS Adapter Connection Pool in Weblogic Server Create the Connection Pool Access to the AQ JMS queue from a BPEL or other SOA process in our example is done via a JMS adapter. To enable this, the JmsAdapter in WebLogic server needs to be configured to have a connection pool which points to the local connection factory JNDI name which was created earlier. Navigate to Deployments > Next and select (click on) the JmsAdapter. Select Configuration > Outbound Connection Pools and New. Check the radio button for oracle.tip.adapter.jms.IJmsConnectionFactory and press Next. JNDI Name: eis/aqjms/UserQueue Press Finish Expand oracle.tip.adapter.jms.IJmsConnectionFactory and click on eis/aqjms/UserQueue to configure it. The ConnectionFactoryLocation must point to the foreign server’s local connection factory name created earlier. In our example, this is AqJmsForeignServerConnectionFactory . As a reminder, this connection factory is located under JMS Modules > AqJmsModule > AqJmsForeignServer > Connection Factories and the value needed here is under Local JNDI Name. Enter AqJmsForeignServerConnectionFactory into the Property Value field for ConnectionFactoryLocation. You must then press Return/Enter then Save for the value to be accepted. If your WebLogic server is running in Development mode, you should see the message that the changes have been activated and the deployment plan successfully updated. If not, then you will manually need to activate the changes in the WebLogic server console.Although the changes have been activated, the JmsAdapter needs to be redeployed in order for the changes to become effective. This should be confirmed by the message Remember to update your deployment to reflect the new plan when you are finished with your changes. Redeploy the JmsAdapter Navigate back to the Deployments screen, either by selecting it in the left-hand navigation tree or by selecting the “Summary of Deployments” link in the breadcrumbs list at the top of the screen. Then select the checkbox next to JmsAdapter and press the Update button. On the Update Application Assistant page, select “Redeploy this application using the following deployment files” and press Finish. After a few seconds you should get the message that the selected deployments were updated. The JMS adapter configuration is complete and it can now be used to access the AQ JMS queue. You can verify that the JNDI name was created correctly, by navigating to Environment > Servers > soa_server1 and View JNDI Tree. Then scroll down in the JNDI Tree Structure to eis and select aqjms. This concludes the sample. In the following post, I will show you how to create a BPEL process which sends a message to this advanced queue via JMS. Best regards John-Brown Evans Oracle Technology Proactive Support Delivery

Read the article

JMS Step 7 - How to Write to an AQ JMS (Advanced Queueing JMS) Queue from a BPEL Process

- by John-Brown.Evans

JMS Step 7 - How to Write to an AQ JMS (Advanced Queueing JMS) Queue from a BPEL Process ol{margin:0;padding:0} .jblist{list-style-type:disc;margin:0;padding:0;padding-left:0pt;margin-left:36pt} .c4_7{vertical-align:top;width:468pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c3_7{vertical-align:top;width:234pt;border-style:solid;border-color:#000000;border-width:1pt;padding:0pt 5pt 0pt 5pt} .c6_7{vertical-align:top;width:156pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c16_7{background-color:#ffffff;padding:0pt 0pt 0pt 0pt} .c0_7{height:11pt;direction:ltr} .c9_7{color:#1155cc;text-decoration:underline} .c17_7{color:inherit;text-decoration:inherit} .c5_7{direction:ltr} .c18_7{background-color:#ffff00} .c2_7{background-color:#f3f3f3} .c14_7{height:0pt} .c8_7{text-indent:36pt} .c11_7{text-align:center} .c7_7{font-style:italic} .c1_7{font-family:"Courier New"} .c13_7{line-height:1.0} .c15_7{border-collapse:collapse} .c12_7{font-weight:bold} .c10_7{font-size:8pt} .title{padding-top:24pt;line-height:1.15;text-align:left;color:#000000;font-size:36pt;font-family:"Arial";font-weight:bold;padding-bottom:6pt} .subtitle{padding-top:18pt;line-height:1.15;text-align:left;color:#666666;font-style:italic;font-size:24pt;font-family:"Georgia";padding-bottom:4pt} li{color:#000000;font-size:10pt;font-family:"Arial"} p{color:#000000;font-size:10pt;margin:0;font-family:"Arial"} h1{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:24pt;font-family:"Arial";font-weight:normal} h2{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:18pt;font-family:"Arial";font-weight:normal} h3{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:14pt;font-family:"Arial";font-weight:normal} h4{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:12pt;font-family:"Arial";font-weight:normal} h5{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:11pt;font-family:"Arial";font-weight:normal} h6{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:10pt;font-family:"Arial";font-weight:normal} This post continues the series of JMS articles which demonstrate how to use JMS queues in a SOA context. The previous posts were: JMS Step 1 - How to Create a Simple JMS Queue in Weblogic Server 11g JMS Step 2 - Using the QueueSend.java Sample Program to Send a Message to a JMS Queue JMS Step 3 - Using the QueueReceive.java Sample Program to Read a Message from a JMS Queue JMS Step 4 - How to Create an 11g BPEL Process Which Writes a Message Based on an XML Schema to a JMS Queue JMS Step 5 - How to Create an 11g BPEL Process Which Reads a Message Based on an XML Schema from a JMS Queue JMS Step 6 - How to Set Up an AQ JMS (Advanced Queueing JMS) for SOA Purposes This example demonstrates how to write a simple message to an Oracle AQ via the the WebLogic AQ JMS functionality from a BPEL process and a JMS adapter. If you have not yet reviewed the previous posts, please do so first, especially the JMS Step 6 post, as this one references objects created there. 1. Recap and Prerequisites In the previous example, we created an Oracle Advanced Queue (AQ) and some related JMS objects in WebLogic Server to be able to access it via JMS. Here are the objects which were created and their names and JNDI names: Database Objects Name Type AQJMSUSER Database User MyQueueTable Advanced Queue (AQ) Table UserQueue Advanced Queue WebLogic Server Objects Object Name Type JNDI Name aqjmsuserDataSource Data Source jdbc/aqjmsuserDataSource AqJmsModule JMS System Module AqJmsForeignServer JMS Foreign Server AqJmsForeignServerConnectionFactory JMS Foreign Server Connection Factory AqJmsForeignServerConnectionFactory AqJmsForeignDestination AQ JMS Foreign Destination queue/USERQUEUE eis/aqjms/UserQueue Connection Pool eis/aqjms/UserQueue 2 . Create a BPEL Composite with a JMS Adapter Partner Link This step requires that you have a valid Application Server Connection defined in JDeveloper, pointing to the application server on which you created the JMS Queue and Connection Factory. You can create this connection in JDeveloper under the Application Server Navigator. Give it any name and be sure to test the connection before completing it. This sample will write a simple XML message to the AQ JMS queue via the JMS adapter, based on the following XSD file, which consists of a single string element: stringPayload.xsd <?xml version="1.0" encoding="windows-1252" ?> <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://www.example.org" targetNamespace="http://www.example.org" elementFormDefault="qualified"> <xsd:element name="exampleElement" type="xsd:string"> </xsd:element> </xsd:schema> The following steps are all executed in JDeveloper. The SOA project will be created inside a JDeveloper Application. If you do not already have an application to contain the project, you can create a new one via File > New > General > Generic Application. Give the application any name, for example JMSTests and, when prompted for a project name and type, call the project JmsAdapterWriteAqJms and select SOA as the project technology type. If you already have an application, continue below. Create a SOA Project Create a new project and select SOA Tier > SOA Project as its type. Name it JmsAdapterWriteAqJms . When prompted for the composite type, choose Composite With BPEL Process. When prompted for the BPEL Process, name it JmsAdapterWriteAqJms too and choose Synchronous BPEL Process as the template. This will create a composite with a BPEL process and an exposed SOAP service. Double-click the BPEL process to open and begin editing it. You should see a simple BPEL process with a Receive and Reply activity. As we created a default process without an XML schema, the input and output variables are simple strings. Create an XSD File An XSD file is required later to define the message format to be passed to the JMS adapter. In this step, we create a simple XSD file, containing a string variable and add it to the project. First select the xsd item in the left-hand navigation tree to ensure that the XSD file is created under that item. Select File > New > General > XML and choose XML Schema. Call it stringPayload.xsd and when the editor opens, select the Source view. then replace the contents with the contents of the stringPayload.xsd example above and save the file. You should see it under the XSD item in the navigation tree. Create a JMS Adapter Partner Link We will create the JMS adapter as a service at the composite level. If it is not already open, double-click the composite.xml file in the navigator to open it. From the Component Palette, drag a JMS adapter over onto the right-hand swim lane, under External References. This will start the JMS Adapter Configuration Wizard. Use the following entries: Service Name: JmsAdapterWrite Oracle Enterprise Messaging Service (OEMS): Oracle Advanced Queueing AppServer Connection: Use an existing application server connection pointing to the WebLogic server on which the connection factory created earlier is located. You can use the “+” button to create a connection directly from the wizard, if you do not already have one. Adapter Interface > Interface: Define from operation and schema (specified later) Operation Type: Produce Message Operation Name: Produce_message Produce Operation Parameters Destination Name: Wait for the list to populate. (Only foreign servers are listed here, because Oracle Advanced Queuing was selected earlier, in step 3) . Select the foreign server destination created earlier, AqJmsForeignDestination (queue) . This will automatically populate the Destination Name field with the name of the foreign destination, queue/USERQUEUE . JNDI Name: The JNDI name to use for the JMS connection. This is the JNDI name of the connection pool created in the WebLogic Server.JDeveloper does not verify the value entered here. If you enter a wrong value, the JMS adapter won’t find the queue and you will get an error message at runtime. In our example, this is the value eis/aqjms/UserQueue Messages URL: We will use the XSD file we created earlier, stringPayload.xsd to define the message format for the JMS adapter. Press the magnifying glass icon to search for schema files. Expand Project Schema Files > stringPayload.xsd and select exampleElement : string . Press Next and Finish, which will complete the JMS Adapter configuration. Wire the BPEL Component to the JMS Adapter In this step, we link the BPEL process/component to the JMS adapter. From the composite.xml editor, drag the right-arrow icon from the BPEL process to the JMS adapter’s in-arrow. This completes the steps at the composite level. 3. Complete the BPEL Process Design Invoke the JMS Adapter Open the BPEL component by double-clicking it in the design view of the composite.xml. This will display the BPEL process in the design view. You should see the JmsAdapterWrite partner link under one of the two swim lanes. We want it in the right-hand swim lane. If JDeveloper displays it in the left-hand lane, right-click it and choose Display > Move To Opposite Swim Lane. An Invoke activity is required in order to invoke the JMS adapter. Drag an Invoke activity between the Receive and Reply activities. Drag the right-hand arrow from the Invoke activity to the JMS adapter partner link. This will open the Invoke editor. The correct default values are entered automatically and are fine for our purposes. We only need to define the input variable to use for the JMS adapter. By pressing the green “+” symbol, a variable of the correct type can be auto-generated, for example with the name Invoke1_Produce_Message_InputVariable. Press OK after creating the variable. Assign Variables Drag an Assign activity between the Receive and Invoke activities. We will simply copy the input variable to the JMS adapter and, for completion, so the process has an output to print, again to the process’s output variable. Double-click the Assign activity and create two Copy rules: for the first, drag Variables > inputVariable > payload > client:process > client:input_string to Invoke1_Produce_Message_InputVariable > body > ns2:exampleElement for the second, drag the same input variable to outputVariable > payload > client:processResponse > client:result This will create two copy rules, similar to the following: Press OK. This completes the BPEL and Composite design. 4. Compile and Deploy the Composite Compile the process by pressing the Make or Rebuild icons or by right-clicking the project name in the navigator and selecting Make... or Rebuild... If the compilation is successful, deploy it to the SOA server connection defined earlier. (Right-click the project name in the navigator, select Deploy to Application Server, choose the application server connection, choose the partition on the server (usually default) and press Finish. You should see the message ---- Deployment finished. ---- in the Deployment frame, if the deployment was successful. 5. Test the Composite Execute a Test Instance In a browser, log in to the Enterprise Manager 11g Fusion Middleware Control (EM) for your SOA installation. Navigate to SOA > soa-infra (soa_server1) > default (or wherever you deployed your composite) and click on JmsAdapterWriteAqJms [1.0] , then press the Test button. Enter any string into the text input field, for example “Test message from JmsAdapterWriteAqJms” then press Test Web Service. If the instance is successful, you should see the same text you entered in the Response payload frame. Monitor the Advanced Queue The test message will be written to the advanced queue created at the top of this sample. To confirm it, log in to the database as AQJMSUSER and query the MYQUEUETABLE database table. For example, from a shell window with SQL*Plus sqlplus aqjmsuser/aqjmsuser SQL> SELECT user_data FROM myqueuetable; which will display the message contents, for example Similarly, you can use the JDeveloper Database Navigator to view the contents. Use a database connection to the AQJMSUSER and in the navigator, expand Queues Tables and select MYQUEUETABLE. Select the Data tab and scroll to the USER_DATA column to view its contents. This concludes this example. The following post will be the last one in this series. In it, we will learn how to read the message we just wrote using a BPEL process and AQ JMS. Best regards John-Brown Evans Oracle Technology Proactive Support Delivery

Read the article

AngularJS on top of ASP.NET: Moving the MVC framework out to the browser

- by Varun Chatterji

Heavily drawing inspiration from Ruby on Rails, MVC4’s convention over configuration model of development soon became the Holy Grail of .NET web development. The MVC model brought with it the goodness of proper separation of concerns between business logic, data, and the presentation logic. However, the MVC paradigm, was still one in which server side .NET code could be mixed with presentation code. The Razor templating engine, though cleaner than its predecessors, still encouraged and allowed you to mix .NET server side code with presentation logic. Thus, for example, if the developer required a certain <div> tag to be shown if a particular variable ShowDiv was true in the View’s model, the code could look like the following: Fig 1: To show a div or not. Server side .NET code is used in the View Mixing .NET code with HTML in views can soon get very messy. Wouldn’t it be nice if the presentation layer (HTML) could be pure HTML? Also, in the ASP.NET MVC model, some of the business logic invariably resides in the controller. It is tempting to use an antipattern like the one shown above to control whether a div should be shown or not. However, best practice would indicate that the Controller should not be aware of the div. The ShowDiv variable in the model should not exist. A controller should ideally, only be used to do the plumbing of getting the data populated in the model and nothing else. The view (ideally pure HTML) should render the presentation layer based on the model. In this article we will see how Angular JS, a new JavaScript framework by Google can be used effectively to build web applications where: 1. Views are pure HTML 2. Controllers (in the server sense) are pure REST based API calls 3. The presentation layer is loaded as needed from partial HTML only files. What is MVVM? MVVM short for Model View View Model is a new paradigm in web development. In this paradigm, the Model and View stuff exists on the client side through javascript instead of being processed on the server through postbacks. These frameworks are JavaScript frameworks that facilitate the clear separation of the “frontend” or the data rendering logic from the “backend” which is typically just a REST based API that loads and processes data through a resource model. The frameworks are called MVVM as a change to the Model (through javascript) gets reflected in the view immediately i.e. Model > View. Also, a change on the view (through manual input) gets reflected in the model immediately i.e. View > Model. The following figure shows this conceptually (comments are shown in red): Fig 2: Demonstration of MVVM in action In Fig 2, two text boxes are bound to the same variable model.myInt. Thus, changing the view manually (changing one text box through keyboard input) also changes the other textbox in real time demonstrating V > M property of a MVVM framework. Furthermore, clicking the button adds 1 to the value of model.myInt thus changing the model through JavaScript. This immediately updates the view (the value in the two textboxes) thus demonstrating the M > V property of a MVVM framework. Thus we see that the model in a MVVM JavaScript framework can be regarded as “the single source of truth“. This is an important concept. Angular is one such MVVM framework. We shall use it to build a simple app that sends SMS messages to a particular number. Application, Routes, Views, Controllers, Scope and Models Angular can be used in many ways to construct web applications. For this article, we shall only focus on building Single Page Applications (SPAs). Many of the approaches we will follow in this article have alternatives. It is beyond the scope of this article to explain every nuance in detail but we shall try to touch upon the basic concepts and end up with a working application that can be used to send SMS messages using Sent.ly Plus (a service that is itself built using Angular). Before you read on, we would like to urge you to forget what you know about Models, Views, Controllers and Routes in the ASP.NET MVC4 framework. All these words have different meanings in the Angular world. Whenever these words are used in this article, they will refer to Angular concepts and not ASP.NET MVC4 concepts. The following figure shows the skeleton of the root page of an SPA: Fig 3: The skeleton of a SPA The skeleton of the application is based on the Bootstrap starter template which can be found at: http://getbootstrap.com/examples/startertemplate/ Apart from loading the Angular, jQuery and Bootstrap JavaScript libraries, it also loads our custom scripts /app/js/controllers.js /app/js/app.js These scripts define the routes, views and controllers which we shall come to in a moment. Application Notice that the body tag (Fig. 3) has an extra attribute: ngapp=”smsApp” Providing this tag “bootstraps” our single page application. It tells Angular to load a “module” called smsApp. This “module” is defined /app/js/app.js angular.module('smsApp', ['smsApp.controllers', function () {}]) Fig 4: The definition of our application module The line shows above, declares a module called smsApp. It also declares that this module “depends” on another module called “smsApp.controllers”. The smsApp.controllers module will contain all the controllers for our SPA. Routing and Views Notice that in the Navbar (in Fig 3) we have included two hyperlinks to: “#/app” “#/help” This is how Angular handles routing. Since the URLs start with “#”, they are actually just bookmarks (and not server side resources). However, our route definition (in /app/js/app.js) gives these URLs a special meaning within the Angular framework. angular.module('smsApp', ['smsApp.controllers', function () { }]) //Configure the routes .config(['$routeProvider', function ($routeProvider) { $routeProvider.when('/binding', { templateUrl: '/app/partials/bindingexample.html', controller: 'BindingController' }); }]); Fig 5: The definition of a route with an associated partial view and controller As we can see from the previous code sample, we are using the $routeProvider object in the configuration of our smsApp module. Notice how the code “asks for” the $routeProvider object by specifying it as a dependency in the [] braces and then defining a function that accepts it as a parameter. This is known as dependency injection. Please refer to the following link if you want to delve into this topic: http://docs.angularjs.org/guide/di What the above code snippet is doing is that it is telling Angular that when the URL is “#/binding”, then it should load the HTML snippet (“partial view”) found at /app/partials/bindingexample.html. Also, for this URL, Angular should load the controller called “BindingController”. We have also marked the div with the class “container” (in Fig 3) with the ngview attribute. This attribute tells Angular that views (partial HTML pages) defined in the routes will be loaded within this div. You can see that the Angular JavaScript framework, unlike many other frameworks, works purely by extending HTML tags and attributes. It also allows you to extend HTML with your own tags and attributes (through directives) if you so desire, you can find out more about directives at the following URL: http://www.codeproject.com/Articles/607873/ExtendingHTMLwithAngularJSDirectives Controllers and Models We have seen how we define what views and controllers should be loaded for a particular route. Let us now consider how controllers are defined. Our controllers are defined in the file /app/js/controllers.js. The following snippet shows the definition of the “BindingController” which is loaded when we hit the URL http://localhost:port/index.html#/binding (as we have defined in the route earlier as shown in Fig 5). Remember that we had defined that our application module “smsApp” depends on the “smsApp.controllers” module (see Fig 4). The code snippet below shows how the “BindingController” defined in the route shown in Fig 5 is defined in the module smsApp.controllers: angular.module('smsApp.controllers', [function () { }]) .controller('BindingController', ['$scope', function ($scope) { $scope.model = {}; $scope.model.myInt = 6; $scope.addOne = function () { $scope.model.myInt++; } }]); Fig 6: The definition of a controller in the “smsApp.controllers” module. The pieces are falling in place! Remember Fig.2? That was the code of a partial view that was loaded within the container div of the skeleton SPA shown in Fig 3. The route definition shown in Fig 5 also defined that the controller called “BindingController” (shown in Fig 6.) was loaded when we loaded the URL: http://localhost:22544/index.html#/binding The button in Fig 2 was marked with the attribute ngclick=”addOne()” which added 1 to the value of model.myInt. In Fig 6, we can see that this function is actually defined in the “BindingController”. Scope We can see from Fig 6, that in the definition of “BindingController”, we defined a dependency on $scope and then, as usual, defined a function which “asks for” $scope as per the dependency injection pattern. So what is $scope? Any guesses? As you might have guessed a scope is a particular “address space” where variables and functions may be defined. This has a similar meaning to scope in a programming language like C#. Model: The Scope is not the Model It is tempting to assign variables in the scope directly. For example, we could have defined myInt as $scope.myInt = 6 in Fig 6 instead of $scope.model.myInt = 6. The reason why this is a bad idea is that scope in hierarchical in Angular. Thus if we were to define a controller which was defined within the another controller (nested controllers), then the inner controller would inherit the scope of the parent controller. This inheritance would follow JavaScript prototypal inheritance. Let’s say the parent controller defined a variable through $scope.myInt = 6. The child controller would inherit the scope through java prototypical inheritance. This basically means that the child scope has a variable myInt that points to the parent scopes myInt variable. Now if we assigned the value of myInt in the parent, the child scope would be updated with the same value as the child scope’s myInt variable points to the parent scope’s myInt variable. However, if we were to assign the value of the myInt variable in the child scope, then the link of that variable to the parent scope would be broken as the variable myInt in the child scope now points to the value 6 and not to the parent scope’s myInt variable. But, if we defined a variable model in the parent scope, then the child scope will also have a variable model that points to the model variable in the parent scope. Updating the value of $scope.model.myInt in the parent scope would change the model variable in the child scope too as the variable is pointed to the model variable in the parent scope. Now changing the value of $scope.model.myInt in the child scope would ALSO change the value in the parent scope. This is because the model reference in the child scope is pointed to the scope variable in the parent. We did no new assignment to the model variable in the child scope. We only changed an attribute of the model variable. Since the model variable (in the child scope) points to the model variable in the parent scope, we have successfully changed the value of myInt in the parent scope. Thus the value of $scope.model.myInt in the parent scope becomes the “single source of truth“. This is a tricky concept, thus it is considered good practice to NOT use scope inheritance. More info on prototypal inheritance in Angular can be found in the “JavaScript Prototypal Inheritance” section at the following URL: https://github.com/angular/angular.js/wiki/UnderstandingScopes. Building It: An Angular JS application using a .NET Web API Backend Now that we have a perspective on the basic components of an MVVM application built using Angular, let’s build something useful. We will build an application that can be used to send out SMS messages to a given phone number. The following diagram describes the architecture of the application we are going to build: Fig 7: Broad application architecture We are going to add an HTML Partial to our project. This partial will contain the form fields that will accept the phone number and message that needs to be sent as an SMS. It will also display all the messages that have previously been sent. All the executable code that is run on the occurrence of events (button clicks etc.) in the view resides in the controller. The controller interacts with the ASP.NET WebAPI to get a history of SMS messages, add a message etc. through a REST based API. For the purposes of simplicity, we will use an in memory data structure for the purposes of creating this application. Thus, the tasks ahead of us are: Creating the REST WebApi with GET, PUT, POST, DELETE methods. Creating the SmsView.html partial Creating the SmsController controller with methods that are called from the SmsView.html partial Add a new route that loads the controller and the partial. 1. Creating the REST WebAPI This is a simple task that should be quite straightforward to any .NET developer. The following listing shows our ApiController: public class SmsMessage { public string to { get; set; } public string message { get; set; } } public class SmsResource : SmsMessage { public int smsId { get; set; } } public class SmsResourceController : ApiController { public static Dictionary<int, SmsResource> messages = new Dictionary<int, SmsResource>(); public static int currentId = 0; // GET api/<controller> public List<SmsResource> Get() { List<SmsResource> result = new List<SmsResource>(); foreach (int key in messages.Keys) { result.Add(messages[key]); } return result; } // GET api/<controller>/5 public SmsResource Get(int id) { if (messages.ContainsKey(id)) return messages[id]; return null; } // POST api/<controller> public List<SmsResource> Post([FromBody] SmsMessage value) { //Synchronize on messages so we don't have id collisions lock (messages) { SmsResource res = (SmsResource) value; res.smsId = currentId++; messages.Add(res.smsId, res); //SentlyPlusSmsSender.SendMessage(value.to, value.message); return Get(); } } // PUT api/<controller>/5 public List<SmsResource> Put(int id, [FromBody] SmsMessage value) { //Synchronize on messages so we don't have id collisions lock (messages) { if (messages.ContainsKey(id)) { //Update the message messages[id].message = value.message; messages[id].to = value.message; } return Get(); } } // DELETE api/<controller>/5 public List<SmsResource> Delete(int id) { if (messages.ContainsKey(id)) { messages.Remove(id); } return Get(); } } Once this class is defined, we should be able to access the WebAPI by a simple GET request using the browser: http://localhost:port/api/SmsResource Notice the commented line: //SentlyPlusSmsSender.SendMessage The SentlyPlusSmsSender class is defined in the attached solution. We have shown this line as commented as we want to explain the core Angular concepts. If you load the attached solution, this line is uncommented in the source and an actual SMS will be sent! By default, the API returns XML. For consumption of the API in Angular, we would like it to return JSON. To change the default to JSON, we make the following change to WebApiConfig.cs file located in the App_Start folder. public static class WebApiConfig { public static void Register(HttpConfiguration config) { config.Routes.MapHttpRoute( name: "DefaultApi", routeTemplate: "api/{controller}/{id}", defaults: new { id = RouteParameter.Optional } ); var appXmlType = config.Formatters.XmlFormatter. SupportedMediaTypes. FirstOrDefault( t => t.MediaType == "application/xml"); config.Formatters.XmlFormatter.SupportedMediaTypes.Remove(appXmlType); } } We now have our backend REST Api which we can consume from Angular! 2. Creating the SmsView.html partial This simple partial will define two fields: the destination phone number (international format starting with a +) and the message. These fields will be bound to model.phoneNumber and model.message. We will also add a button that we shall hook up to sendMessage() in the controller. A list of all previously sent messages (bound to model.allMessages) will also be displayed below the form input. The following code shows the code for the partial:  <div class="well" style="margin-top: 30px;"> <table style="width: 100%;"> <tr> <td style="width: 45%; text-align: center;"> <input type="text" placeholder="Phone number (eg; +44 7778 609466)" ng-model="model.phoneNumber" class="form-control" style="width: 90%" onkeypress="return checkPhoneInput();" /> </td> <td style="width: 45%; text-align: center;"> <input type="text" placeholder="Message" ng-model="model.message" class="form-control" style="width: 90%" /> </td> <td style="text-align: center;"> <button class="btn btn-danger" ng-click="sendMessage();" ng-disabled="model.isAjaxInProgress" style="marginright: 5px;">Send</button> <img src="/Content/ajax-loader.gif" ng-show="model.isAjaxInProgress" /> </td> </tr> </table> </div>  <div style="margin-top: 30px;">  <div ng-show="model.allMessages.length == 0"> No messages have been sent yet! </div>  <div ng-show="model.allMessages.length == 0"> <table style="width: 100%;" class="table table-striped"> <tr> <td>Phone Number</td> <td>Message</td> <td></td> </tr>  <tr ng-repeat="message in model.allMessages"> <td>{{ message.to }}</td> <td>{{ message.message }}</td> <td> <button class="btn btn-danger" ng-click="delete(message.smsId);" ng-disabled="model.isAjaxInProgress">Delete</button> </td> </tr> </table> </div> </div> The above code is commented and should be self explanatory. Conditional rendering is achieved through using the ng-show=”condition” attribute on various div tags. Input fields are bound to the model and the send button is bound to the sendMessage() function in the controller as through the ngclick=”sendMessage()” attribute defined on the button tag. While AJAX calls are taking place, the controller sets model.isAjaxInProgress to true. Based on this variable, buttons are disabled through the ng-disabled directive which is added as an attribute to the buttons. The ng-repeat directive added as an attribute to the tr tag causes the table row to be rendered multiple times much like an ASP.NET repeater. 3. Creating the SmsController controller The penultimate piece of our application is the controller which responds to events from our view and interacts with our MVC4 REST WebAPI. The following listing shows the code we need to add to /app/js/controllers.js. Note that controller definitions can be chained. Also note that this controller “asks for” the $http service. The $http service is a simple way in Angular to do AJAX. So far we have only encountered modules, controllers, views and directives in Angular. The $http is new entity in Angular called a service. More information on Angular services can be found at the following URL: http://docs.angularjs.org/guide/dev_guide.services.understanding_services. .controller('SmsController', ['$scope', '$http', function ($scope, $http) { //We define the model $scope.model = {}; //We define the allMessages array in the model //that will contain all the messages sent so far $scope.model.allMessages = []; //The error if any $scope.model.errorMessage = undefined; //We initially load data so set the isAjaxInProgress = true; $scope.model.isAjaxInProgress = true; //Load all the messages $http({ url: '/api/smsresource', method: "GET" }). success(function (data, status, headers, config) { this callback will be called asynchronously //when the response is available $scope.model.allMessages = data; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }). error(function (data, status, headers, config) { //called asynchronously if an error occurs //or server returns response with an error status. $scope.model.errorMessage = "Error occurred status:" + status; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }); $scope.delete = function (id) { //We are making an ajax call so we set this to true $scope.model.isAjaxInProgress = true; $http({ url: '/api/smsresource/' + id, method: "DELETE" }). success(function (data, status, headers, config) { // this callback will be called asynchronously // when the response is available $scope.model.allMessages = data; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }); error(function (data, status, headers, config) { // called asynchronously if an error occurs // or server returns response with an error status. $scope.model.errorMessage = "Error occurred status:" + status; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }); } $scope.sendMessage = function () { $scope.model.errorMessage = undefined; var message = ''; if($scope.model.message != undefined) message = $scope.model.message.trim(); if ($scope.model.phoneNumber == undefined || $scope.model.phoneNumber == '' || $scope.model.phoneNumber.length < 10 || $scope.model.phoneNumber[0] != '+') { $scope.model.errorMessage = "You must enter a valid phone number in international format. Eg: +44 7778 609466"; return; } if (message.length == 0) { $scope.model.errorMessage = "You must specify a message!"; return; } //We are making an ajax call so we set this to true $scope.model.isAjaxInProgress = true; $http({ url: '/api/smsresource', method: "POST", data: { to: $scope.model.phoneNumber, message: $scope.model.message } }). success(function (data, status, headers, config) { // this callback will be called asynchronously // when the response is available $scope.model.allMessages = data; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }). error(function (data, status, headers, config) { // called asynchronously if an error occurs // or server returns response with an error status. $scope.model.errorMessage = "Error occurred status:" + status // We are done with AJAX loading $scope.model.isAjaxInProgress = false; }); } }]); We can see from the previous listing how the functions that are called from the view are defined in the controller. It should also be evident how easy it is to make AJAX calls to consume our MVC4 REST WebAPI. Now we are left with the final piece. We need to define a route that associates a particular path with the view we have defined and the controller we have defined. 4. Add a new route that loads the controller and the partial This is the easiest part of the puzzle. We simply define another route in the /app/js/app.js file: $routeProvider.when('/sms', { templateUrl: '/app/partials/smsview.html', controller: 'SmsController' }); Conclusion In this article we have seen how much of the server side functionality in the MVC4 framework can be moved to the browser thus delivering a snappy and fast user interface. We have seen how we can build client side HTML only views that avoid the messy syntax offered by server side Razor views. We have built a functioning app from the ground up. The significant advantage of this approach to building web apps is that the front end can be completely platform independent. Even though we used ASP.NET to create our REST API, we could just easily have used any other language such as Node.js, Ruby etc without changing a single line of our front end code. Angular is a rich framework and we have only touched on basic functionality required to create a SPA. For readers who wish to delve further into the Angular framework, we would recommend the following URL as a starting point: http://docs.angularjs.org/misc/started. To get started with the code for this project: Sign up for an account at http://plus.sent.ly (free) Add your phone number Go to the “My Identies Page” Note Down your Sender ID, Consumer Key and Consumer Secret Download the code for this article at: https://docs.google.com/file/d/0BzjEWqSE31yoZjZlV0d0R2Y3eW8/edit?usp=sharing Change the values of Sender Id, Consumer Key and Consumer Secret in the web.config file Run the project through Visual Studio!

Read the article

Windows Azure: General Availability of Web Sites + Mobile Services, New AutoScale + Alerts Support, No Credit Card Needed for MSDN

- by ScottGu

This morning we released a major set of updates to Windows Azure. These updates included: Web Sites: General Availability Release of Windows Azure Web Sites with SLA Mobile Services: General Availability Release of Windows Azure Mobile Services with SLA Auto-Scale: New automatic scaling support for Web Sites, Cloud Services and Virtual Machines Alerts/Notifications: New email alerting support for all Compute Services (Web Sites, Mobile Services, Cloud Services, and Virtual Machines) MSDN: No more credit card requirement for sign-up All of these improvements are now available to use immediately (note: some are still in preview). Below are more details about them. Web Sites: General Availability Release of Windows Azure Web Sites I’m incredibly excited to announce the General Availability release of Windows Azure Web Sites. The Windows Azure Web Sites service is perfect for hosting a web presence, building customer engagement solutions, and delivering business web apps. Today’s General Availability release means we are taking off the “preview” tag from the Free and Standard (formerly called reserved) tiers of Windows Azure Web Sites. This means we are providing: A 99.9% monthly SLA (Service Level Agreement) for the Standard tier Microsoft Support available on a 24x7 basis (with plans that range from developer plans to enterprise Premier support) The Free tier runs in a shared compute environment and supports up to 10 web sites. While the Free tier does not come with an SLA, it works great for rapid development and testing and enables you to quickly spike out ideas at no cost. The Standard tier, which was called “Reserved” during the preview, runs using dedicated per-customer VM instances for great performance, isolation and scalability, and enables you to host up to 500 different Web sites within them. You can easily scale your Standard instances on-demand using the Windows Azure Management Portal. You can adjust VM instance sizes from a Small instance size (1 core, 1.75GB of RAM), up to a Medium instance size (2 core, 3.5GB of RAM), or Large instance (4 cores and 7 GB RAM). You can choose to run between 1 and 10 Standard instances, enabling you to easily scale up your web backend to 40 cores of CPU and 70GB of RAM: Today’s release also includes general availability support for custom domain SSL certificate bindings for web sites running using the Standard tier. Customers will be able to utilize certificates they purchase for their custom domains and use either SNI or IP based SSL encryption. SNI encryption is available for all modern browsers and does not require an IP address. SSL certificates can be used for individual sites or wild-card mapped across multiple sites (we charge extra for the use of a SSL cert – but the fee is per-cert and not per site which means you pay once for it regardless of how many sites you use it with). Today’s release also includes the following new features: Auto-Scale support Today’s Windows Azure release adds preview support for Auto-Scaling web sites. This enables you to setup automatic scale rules based on the activity of your instances – allowing you to automatically scale down (and save money) when they are below a CPU threshold you define, and automatically scale up quickly when traffic increases. See below for more details. 64-bit and 32-bit mode support You can now choose to run your standard tier instances in either 32-bit or 64-bit mode (previously they only ran in 32-bit mode). This enables you to address even more memory within individual web applications. Memory dumps Memory dumps can be very useful for diagnosing issues and debugging apps. Using a REST API, you can now get a memory dump of your sites, which you can then use for investigating issues in Visual Studio Debugger, WinDbg, and other tools. Scaling Sites Independently Prior to today’s release, all sites scaled up/down together whenever you scaled any site in a sub-region. So you may have had to keep your proof-of-concept or testing sites in a separate sub-region if you wanted to keep them in the Free tier. This will no longer be necessary. Windows Azure Web Sites can now mix different tier levels in the same geographic sub-region. This allows you, for example, to selectively move some of your sites in the West US sub-region up to Standard tier when they require the features, scalability, and SLA of the Standard tier. Full pricing details on Windows Azure Web Sites can be found here. Note that the “Shared Tier” of Windows Azure Web Sites remains in preview mode (and continues to have discounted preview pricing). Mobile Services: General Availability Release of Windows Azure Mobile Services I’m incredibly excited to announce the General Availability release of Windows Azure Mobile Services. Mobile Services is perfect for building scalable cloud back-ends for Windows 8.x, Windows Phone, Apple iOS, Android, and HTML/JavaScript applications. Customers We’ve seen tremendous adoption of Windows Azure Mobile Services since we first previewed it last September, and more than 20,000 customers are now running mobile back-ends in production using it. These customers range from startups like Yatterbox, to university students using Mobile Services to complete apps like Sly Fox in their spare time, to media giants like Verdens Gang finding new ways to deliver content, and telcos like TalkTalk Business delivering the up-to-the-minute information their customers require. In today’s Build keynote, we demonstrated how TalkTalk Business is using Windows Azure Mobile Services to deliver service, outage and billing information to its customers, wherever they might be. Partners When we unveiled the source control and Custom API features I blogged about two weeks ago, we enabled a range of new scenarios, one of which is a more flexible way to work with third party services. The following blogs, samples and tutorials from our partners cover great ways you can extend Mobile Services to help you build rich modern apps: New Relic allows developers to monitor and manage the end-to-end performance of iOS and Android applications connected to Mobile Services. SendGrid eliminates the complexity of sending email from Mobile Services, saving time and money, while providing reliable delivery to the inbox. Twilio provides a telephony infrastructure web service in the cloud that you can use with Mobile Services to integrate phone calls, text messages and IP voice communications into your mobile apps. Xamarin provides a Mobile Services add on to make it easy building cross-platform connected mobile aps. Pusher allows quickly and securely add scalable real-time messaging functionality to Mobile Services-based web and mobile apps. Visual Studio 2013 and Windows 8.1 This week during //build/ keynote, we demonstrated how Visual Studio 2013, Mobile Services and Windows 8.1 make building connected apps easier than ever. Developers building Windows 8 applications in Visual Studio can now connect them to Windows Azure Mobile Services by simply right clicking then choosing Add Connected Service. You can either create a new Mobile Service or choose existing Mobile Service in the Add Connected Service dialog. Once completed, Visual Studio adds a reference to Mobile Services SDK to your project and generates a Mobile Services client initialization snippet automatically. Add Push Notifications Push Notifications and Live Tiles are a key to building engaging experiences. Visual Studio 2013 and Mobile Services make it super easy to add push notifications to your Windows 8.1 app, by clicking Add a Push Notification item: The Add Push Notification wizard will then guide you through the registration with the Windows Store as well as connecting your app to a new or existing mobile service. Upon completion of the wizard, Visual Studio will configure your mobile service with the WNS credentials, as well as add sample logic to your client project and your mobile service that demonstrates how to send push notifications to your app. Server Explorer Integration In Visual Studio 2013 you can also now view your Mobile Services in the the Server Explorer. You can add tables, edit, and save server side scripts without ever leaving Visual Studio, as shown on the image below: Pricing With today’s general availability release we are announcing that we will be offering Mobile Services in three tiers – Free, Standard, and Premium. Each tier is metered using a simple pricing model based on the # of API calls (bandwidth is included at no extra charge), and the Standard and Premium tiers are backed by 99.9% monthly SLAs. You can elastically scale up or down the number of instances you have of each tier to increase the # of API requests your service can support – allowing you to efficiently scale as your business grows. The following table summarizes the new pricing model (full pricing details here): You can find the full details of the new pricing model here. Build Conference Talks The //BUILD/ conference will be packed with sessions covering every aspect of developing connected applications with Mobile Services. The best part is that, even if you can’t be with us in San Francisco, every session is being streamed live. Be sure not to miss these talks: Mobile Services – Soup to Nuts — Josh Twist Building Cross-Platform Apps with Windows Azure Mobile Services — Chris Risner Connected Windows Phone Apps made Easy with Mobile Services — Yavor Georgiev Build Connected Windows 8.1 Apps with Mobile Services — Nick Harris Who’s that user? Identity in Mobile Apps — Dinesh Kulkarni Building REST Services with JavaScript — Nathan Totten Going Live and Beyond with Windows Azure Mobile Services — Kirill Gavrylyuk , Paul Batum Protips for Windows Azure Mobile Services — Chris Risner AutoScale: Dynamically scale up/down your app based on real-world usage One of the key benefits of Windows Azure is that you can dynamically scale your application in response to changing demand. In the past, though, you have had to either manually change the scale of your application, or use additional tooling (such as WASABi or MetricsHub) to automatically scale your application. Today, we’re announcing that AutoScale will be built-into Windows Azure directly. With today’s release it is now enabled for Cloud Services, Virtual Machines and Web Sites (Mobile Services support will come soon). Auto-scale enables you to configure Windows Azure to automatically scale your application dynamically on your behalf (without any manual intervention) so you can achieve the ideal performance and cost balance. Once configured it will regularly adjust the number of instances running in response to the load in your application. Currently, we support two different load metrics: CPU percentage Storage queue depth (Cloud Services and Virtual Machines only) We’ll enable automatic scaling on even more scale metrics in future updates. When to use Auto-Scale The following are good criteria for services/apps that will benefit from the use of auto-scale: The service/app can scale horizontally (e.g. it can be duplicated to multiple instances) The service/app load changes over time If your app meets these criteria, then you should look to leverage auto-scale. How to Enable Auto-Scale To enable auto-scale, simply navigate to the Scale tab in the Windows Azure Management Portal for the app/service you wish to enable. Within the scale tab turn the Auto-Scale setting on to either CPU or Queue (for Cloud Services and VMs) to enable Auto-Scale. Then change the instance count and target CPU settings to configure the Auto-Scale ranges you want to maintain. The image below demonstrates how to enable Auto-Scale on a Windows Azure Web-Site. I’ve configured the web-site so that it will run using between 1 and 5 VM instances. The exact # used will depend on the aggregate CPU of the VMs using the 40-70% range I’ve configured below. If the aggregate CPU goes above 70%, then Windows Azure will automatically add new VMs to the pool (up to the maximum of 5 instances I’ve configured it to use). If the aggregate CPU drops below 40% then Windows Azure will automatically start shutting down VMs to save me money: Once you’ve turned auto-scale on, you can return to the Scale tab at any point and select Off to manually set the number of instances. Using the Auto-Scale Preview With today’s update you can now, in just a few minutes, have Windows Azure automatically adjust the number of instances you have running in your apps to keep your service performant at an even better cost. Auto-scale is being released today as a preview feature, and will be free until General Availability. During preview, each subscription is limited to 10 separate auto-scale rules across all of the resources they have (Web sites, Cloud services or Virtual Machines). If you hit the 10 limit, you can disable auto-scale for any resource to enable it for another. Alerts and Notifications Starting today we are now providing the ability to configure threshold based alerts on monitoring metrics. This feature is available for compute services (cloud services, VM, websites and mobiles services). Alerts provide you the ability to get proactively notified of active or impending issues within your application. You can define alert rules for: Virtual machine monitoring metrics that are collected from the host operating system (CPU percentage, network in/out, disk read bytes/sec and disk write bytes/sec) and on monitoring metrics from monitoring web endpoint urls (response time and uptime) that you have configured. Cloud service monitoring metrics that are collected from the host operating system (same as VM), monitoring metrics from the guest VM (from performance counters within the VM) and on monitoring metrics from monitoring web endpoint urls (response time and uptime) that you have configured. For Web Sites and Mobile Services, alerting rules can be configured on monitoring metrics from monitoring endpoint urls (response time and uptime) that you have configured. Creating Alert Rules You can add an alert rule for a monitoring metric by navigating to the Setting -> Alerts tab in the Windows Azure Management Portal. Click on the Add Rule button to create an alert rule. Give the alert rule a name and optionally add a description. Then pick the service which you want to define the alert rule on: The next step in the alert creation wizard will then filter the monitoring metrics based on the service you selected: Once created the rule will show up in your alerts list within the settings tab: The rule above is defined as “not activated” since it hasn’t tripped over the CPU threshold we set. If the CPU on the above machine goes over the limit, though, I’ll get an email notifying me from an Windows Azure Alerts email address ([email protected]). And when I log into the portal and revisit the alerts tab I’ll see it highlighted in red. Clicking it will then enable me to see what is causing it to fail, as well as view the history of when it has happened in the past. Alert Notifications With today’s initial preview you can now easily create alerting rules based on monitoring metrics and get notified on active or impending issues within your application that require attention. During preview, each subscription is limited to 10 alert rules across all of the services that support alert rules. No More Credit Card Requirement for MSDN Subscribers Earlier this month (during TechEd 2013), Windows Azure announced that MSDN users will get Windows Azure Credits every month that they can use for any Windows Azure services they want. You can read details about this in my previous Dev/Test blog post. Today we are making further updates to enable an easier Windows Azure signup for MSDN users. MSDN users will now not be required to provide payment information (e.g. no credit card) during sign-up, so long as they use the service within the included monetary credit for the billing period. For usage beyond the monetary credit, they can enable overages by providing the payment information and remove the spending limit. This enables a super easy, one page sign-up experience for MSDN users. Simply sign-up for your Windows Azure trial using the same Microsoft ID that you use to manage your MSDN account, then complete the one page sign-up form below and you will be able to spend your free monthly MSDN credits (up to $150 each month) on any Windows Azure resource for dev/test: This makes it trivially easy for every MDSN customer to start using Windows Azure today. If you haven’t signed up yet, I definitely recommend checking it out. Summary Today’s release includes a ton of great features that enable you to build even better cloud solutions. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today. Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article

Enterprise Process Maps: A Process Picture worth a Million Words

- by raul.goycoolea

p { margin-bottom: 0.08in; }h1 { margin-top: 0.33in; margin-bottom: 0in; color: rgb(54, 95, 145); page-break-inside: avoid; }h1.western { font-family: "Cambria",serif; font-size: 14pt; }h1.cjk { font-family: "DejaVu Sans"; font-size: 14pt; }h1.ctl { font-size: 14pt; } Getting Started with Business Transformations A well-known proverb states that "A picture is worth a thousand words." In relation to Business Process Management (BPM), a credible analyst might have a few questions. What if the picture was taken from some particular angle, like directly overhead? What if it was taken from only an inch away or a mile away? What if the photographer did not focus the camera correctly? Does the value of the picture depend on who is looking at it? Enterprise Process Maps are analogous in this sense of relative value. Every BPM project (holistic BPM kick-off, enterprise system implementation, Service-oriented Architecture, business process transformation, corporate performance management, etc.) should be begin with a clear understanding of the business environment, from the biggest picture representations down to the lowest level required or desired for the particular project type, scope and objectives. The Enterprise Process Map serves as an entry point for the process architecture and is defined: the single highest level of process mapping for an organization. It is constructed and evaluated during the Strategy Phase of the Business Process Management Lifecycle. (see Figure 1) Fig. 1: Business Process Management Lifecycle Many organizations view such maps as visual abstractions, constructed for the single purpose of process categorization. This, in turn, results in a lesser focus on the inherent intricacies of the Enterprise Process view, which are explored in the course of this paper. With the main focus of a large scale process documentation effort usually underlying an ERP or other system implementation, it is common for the work to be driven by the desire to "get to the details," and to the type of modeling that will derive near-term tangible results. For instance, a project in American Pharmaceutical Company X is driven by the Director of IT. With 120+ systems in place, and a lack of standardized processes across the United States, he and the VP of IT have decided to embark on a long-term ERP implementation. At the forethought of both are questions, such as: How does my application architecture map to the business? What are each application's functionalities, and where do the business processes utilize them? Where can we retire legacy systems? Well-developed BPM methodologies prescribe numerous model types to capture such information and allow for thorough analysis in these areas. Process to application maps, Event Driven Process Chains, etc. provide this level of detail and facilitate the completion of such project-specific questions. These models and such analysis are appropriately carried out at a relatively low level of process detail. (see figure 2) Fig. 2: The Level Concept, Generic Process HierarchySome of the questions remaining are ones of documentation longevity, the continuation of BPM practice in the organization, process governance and ownership, process transparency and clarity in business process objectives and strategy. The Level Concept in Brief Figure 2 shows a generic, four-level process hierarchy depicting the breakdown of a "Process Area" into progressively more detailed process classifications. The number of levels and the names of these levels are flexible, and can be fit to the standards of the organization's chosen terminology or any other chosen reference model that makes logical sense for both short and long term process description. It is at Level 1 (in this case the Process Area level), that the Enterprise Process Map is created. This map and its contained objects become the foundation for a top-down approach to subsequent mapping, object relationship development, and analysis of the organization's processes and its supporting infrastructure. Additionally, this picture serves as a communication device, at an executive level, describing the design of the business in its service to a customer. It seems, then, imperative that the process development effort, and this map, start off on the right foot. Figuring out just what that right foot is, however, is critical and trend-setting in an evolving organization. Key Considerations Enterprise Process Maps are usually not as living and breathing as other process maps. Just as it would be an extremely difficult task to change the foundation of the Sears Tower or a city plan for the entire city of Chicago, the Enterprise Process view of an organization usually remains unchanged once developed (unless, of course, an organization is at a stage where it is capable of true, high-level process innovation). Regardless, the Enterprise Process map is a key first step, and one that must be taken in a precise way. What makes this groundwork solid depends on not only the materials used to construct it (process areas), but also the layout plan and knowledge base of what will be built (the entire process architecture). It seems reasonable that care and consideration are required to create this critical high level map... but what are the important factors? Does the process modeler need to worry about how many process areas there are? About who is looking at it? Should he only use the color pink because it's his boss' favorite color? Interestingly, and perhaps surprisingly, these are all valid considerations that may just require a bit of structure. Below are Three Key Factors to consider when building an Enterprise Process Map: Company Strategic Focus Process Categorization: Customer is Core End-to-end versus Functional Processes Company Strategic Focus As mentioned above, the Enterprise Process Map is created during the Strategy Phase of the Business Process Management Lifecycle. From Oracle Business Process Management methodology for business transformation, it is apparent that business processes exist for the purpose of achieving the strategic objectives of an organization. In a prescribed, top-down approach to process development, it must be ensured that each process fulfills its objectives, and in an aggregated manner, drives fulfillment of the strategic objectives of the company, whether for particular business segments or in a broader sense. This is a crucial point, as the strategic messages of the company must therefore resound in its process maps, in particular one that spans the processes of the complete business: the Enterprise Process Map. One simple example from Company X is shown below (see figure 3). Fig. 3: Company X Enterprise Process Map In reviewing Company X's Enterprise Process Map, one can immediately begin to understand the general strategic mindset of the organization. It shows that Company X is focused on its customers, defining 10 of its process areas belonging to customer-focused categories. Additionally, the organization views these end-customer-oriented process areas as part of customer-fulfilling value chains, while support process areas do not provide as much contiguous value. However, by including both support and strategic process categorizations, it becomes apparent that all processes are considered vital to the success of the customer-oriented focus processes. Below is an example from Company Y (see figure 4). Fig. 4: Company Y Enterprise Process Map Company Y, although also a customer-oriented company, sends a differently focused message with its depiction of the Enterprise Process Map. Along the top of the map is the company's product tree, overarching the process areas, which when executed deliver the products themselves. This indicates one strategic objective of excellence in product quality. Additionally, the view represents a less linear value chain, with strong overlaps of the various process areas. Marketing and quality management are seen as a key support processes, as they span the process lifecycle. Often, companies may incorporate graphics, logos and symbols representing customers and suppliers, and other objects to truly send the strategic message to the business. Other times, Enterprise Process Maps may show high level of responsibility to organizational units, or the application types that support the process areas. It is possible that hundreds of formats and focuses can be applied to an Enterprise Process Map. What is of vital importance, however, is which formats and focuses are chosen to truly represent the direction of the company, and serve as a driver for focusing the business on the strategic objectives set forth in that right. Process Categorization: Customer is Core In the previous two examples, processes were grouped using differing categories and techniques. Company X showed one support and three customer process categorizations using encompassing chevron objects; Customer Y achieved a less distinct categorization using a gradual color scheme. Either way, and in general, modeling of the process areas becomes even more valuable and easily understood within the context of business categorization, be it strategic or otherwise. But how one categorizes their processes is typically more complex than simply choosing object shapes and colors. Previously, it was stated that the ideal is a prescribed top-down approach to developing processes, to make certain linkages all the way back up to corporate strategy. But what about external influences? What forces push and pull corporate strategy? Industry maturity, product lifecycle, market profitability, competition, etc. can all drive the critical success factors of a particular business segment, or the company as a whole, in addition to previous corporate strategy. This may seem to be turning into a discussion of theory, but that is far from the case. In fact, in years of recent study and evolution of the way businesses operate, cross-industry and across the globe, one invariable has surfaced with such strength to make it undeniable in the game plan of any strategy fit for survival. That constant is the customer. Many of a company's critical success factors, in any business segment, relate to the customer: customer retention, satisfaction, loyalty, etc. Businesses serve customers, and so do a business's processes, mapped or unmapped. The most effective way to categorize processes is in a manner that visualizes convergence to what is core for a company. It is the value chain, beginning with the customer in mind, and ending with the fulfillment of that customer, that becomes the core or the centerpiece of the Enterprise Process Map. (See figure 5) Fig. 5: Company Z Enterprise Process Map Company Z has what may be viewed as several different perspectives or "cuts" baked into their Enterprise Process Map. It has divided its processes into three main categories (top, middle, and bottom) of Management Processes, the Core Value Chain and Supporting Processes. The Core category begins with Corporate Marketing (which contains the activities of beginning to engage customers) and ends with Customer Service Management. Within the value chain, this company has divided into the focus areas of their two primary business lines, Foods and Beverages. Does this mean that areas, such as Strategy, Information Management or Project Management are not as important as those in the Core category? No! In some cases, though, depending on the organization's understanding of high-level BPM concepts, use of category names, such as "Core," "Management" or "Support," can be a touchy subject. What is important to understand, is that no matter the nomenclature chosen, the Core processes are those that drive directly to customer value, Support processes are those which make the Core processes possible to execute, and Management Processes are those which steer and influence the Core. Some common terms for these three basic categorizations are Core, Customer Fulfillment, Customer Relationship Management, Governing, Controlling, Enabling, Support, etc. End-to-end versus Functional Processes Every high and low level of process: function, task, activity, process/work step (whatever an organization calls it), should add value to the flow of business in an organization. Suppose that within the process "Deliver package," there is a documented task titled "Stop for ice cream." It doesn't take a process expert to deduce the room for improvement. Though stopping for ice cream may create gain for the one person performing it, it likely benefits neither the organization nor, more importantly, the customer. In most cases, "Stop for ice cream" wouldn't make it past the first pass of To-Be process development. What would make the cut, however, would be a flow of tasks that, each having their own value add, build up to greater and greater levels of process objective. In this case, those tasks would combine to achieve a status of "package delivered." Figure 3 shows a simple example: Just as the package can only be delivered (outcome of the process) without first being retrieved, loaded, and the travel destination reached (outcomes of the process steps), some higher level of process "Play Practical Joke" (e.g., main process or process area) cannot be completed until a package is delivered. It seems that isolated or functionally separated processes, such as "Deliver Package" (shown in Figure 6), are necessary, but are always part of a bigger value chain. Each of these individual processes must be analyzed within the context of that value chain in order to ensure successful end-to-end process performance. For example, this company's "Create Joke Package" process could be operating flawlessly and efficiently, but if a joke is never developed, it cannot be created, so the end-to-end process breaks. Fig. 6: End to End Process Construction That being recognized, it is clear that processes must be viewed as end-to-end, customer-to-customer, and in the context of company strategy. But as can also be seen from the previous example, these vital end-to-end processes cannot be built without the functionally oriented building blocks. Without one, the other cannot be had, or at least not in a complete and organized fashion. As it turns out, but not discussed in depth here, the process modeling effort, BPM organizational development, and comprehensive coverage cannot be fully realized without a semi-functional, process-oriented approach. Then, an Enterprise Process Map should be concerned with both views, the building blocks, and access points to the business-critical end-to-end processes, which they construct. Without the functional building blocks, all streams of work needed for any business transformation would be lost mess of process disorganization. End-to-end views are essential for utilization in optimization in context, understanding customer impacts, base-lining all project phases and aligning objectives. Including both views on an Enterprise Process Map allows management to understand the functional orientation of the company's processes, while still providing access to end-to-end processes, which are most valuable to them. (See figures 7 and 8). Fig. 7: Simplified Enterprise Process Map with end-to-end Access Point The above examples show two unique ways to achieve a successful Enterprise Process Map. The first example is a simple map that shows a high level set of process areas and a separate section with the end-to-end processes of concern for the organization. This particular map is filtered to show just one vital end-to-end process for a project-specific focus. Fig. 8: Detailed Enterprise Process Map showing connected Functional Processes The second example shows a more complex arrangement and categorization of functional processes (the names of each process area has been removed). The end-to-end perspective is achieved at this level through the connections (interfaces at lower levels) between these functional process areas. An important point to note is that the organization of these two views of the Enterprise Process Map is dependent, in large part, on the orientation of its audience, and the complexity of the landscape at the highest level. If both are not apparent, the Enterprise Process Map is missing an opportunity to serve as a holistic, high-level view. Conclusion In the world of BPM, and specifically regarding Enterprise Process Maps, a picture can be worth as many words as the thought and effort that is put into it. Enterprise Process Maps alone cannot change an organization, but they serve more purposes than initially meet the eye, and therefore must be designed in a way that enables a BPM mindset, business process understanding and business transformation efforts. Every Enterprise Process Map will and should be different when looking across organizations. Its design will be driven by company strategy, a level of customer focus, and functional versus end-to-end orientations. This high-level description of the considerations of the Enterprise Process Maps is not a prescriptive "how to" guide. However, a company attempting to create one may not have the practical BPM experience to truly explore its options or impacts to the coming work of business process transformation. The biggest takeaway is that process modeling, at all levels, is a science and an art, and art is open to interpretation. It is critical that the modeler of the highest level of process mapping be a cognoscente of the message he is delivering and the factors at hand. Without sufficient focus on the design of the Enterprise Process Map, an entire BPM effort may suffer. For additional information please check: Oracle Business Process Management.

Read the article

Windows Azure: Import/Export Hard Drives, VM ACLs, Web Sockets, Remote Debugging, Continuous Delivery, New Relic, Billing Alerts and More

- by ScottGu

Two weeks ago we released a giant set of improvements to Windows Azure, as well as a significant update of the Windows Azure SDK. This morning we released another massive set of enhancements to Windows Azure. Today’s new capabilities include: Storage: Import/Export Hard Disk Drives to your Storage Accounts HDInsight: General Availability of our Hadoop Service in the cloud Virtual Machines: New VM Gallery, ACL support for VIPs Web Sites: WebSocket and Remote Debugging Support Notification Hubs: Segmented customer push notification support with tag expressions TFS & GIT: Continuous Delivery Support for Web Sites + Cloud Services Developer Analytics: New Relic support for Web Sites + Mobile Services Service Bus: Support for partitioned queues and topics Billing: New Billing Alert Service that sends emails notifications when your bill hits a threshold you define All of these improvements are now available to use immediately (note that some features are still in preview). Below are more details about them. Storage: Import/Export Hard Disk Drives to Windows Azure I am excited to announce the preview of our new Windows Azure Import/Export Service! The Windows Azure Import/Export Service enables you to move large amounts of on-premises data into and out of your Windows Azure Storage accounts. It does this by enabling you to securely ship hard disk drives directly to our Windows Azure data centers. Once we receive the drives we’ll automatically transfer the data to or from your Windows Azure Storage account. This enables you to import or export massive amounts of data more quickly and cost effectively (and not be constrained by available network bandwidth). Encrypted Transport Our Import/Export service provides built-in support for BitLocker disk encryption – which enables you to securely encrypt data on the hard drives before you send it, and not have to worry about it being compromised even if the disk is lost/stolen in transit (since the content on the transported hard drives is completely encrypted and you are the only one who has the key to it). The drive preparation tool we are shipping today makes setting up bitlocker encryption on these hard drives easy. How to Import/Export your first Hard Drive of Data You can read our Getting Started Guide to learn more about how to begin using the import/export service. You can create import and export jobs via the Windows Azure Management Portal as well as programmatically using our Server Management APIs. It is really easy to create a new import or export job using the Windows Azure Management Portal. Simply navigate to a Windows Azure storage account, and then click the new Import/Export tab now available within it (note: if you don’t have this tab make sure to sign-up for the Import/Export preview): Then click the “Create Import Job” or “Create Export Job” commands at the bottom of it. This will launch a wizard that easily walks you through the steps required: For more comprehensive information about Import/Export, refer to Windows Azure Storage team blog. You can also send questions and comments to the [email protected] email address. We think you’ll find this new service makes it much easier to move data into and out of Windows Azure, and it will dramatically cut down the network bandwidth required when working on large data migration projects. We hope you like it. HDInsight: 100% Compatible Hadoop Service in the Cloud Last week we announced the general availability release of Windows Azure HDInsight. HDInsight is a 100% compatible Hadoop service that allows you to easily provision and manage Hadoop clusters for big data processing in Windows Azure. This release is now live in production, backed by an enterprise SLA, supported 24x7 by Microsoft Support, and is ready to use for production scenarios. HDInsight allows you to use Apache Hadoop tools, such as Pig and Hive, to process large amounts of data in Windows Azure Blob Storage. Because data is stored in Windows Azure Blob Storage, you can choose to dynamically create Hadoop clusters only when you need them, and then shut them down when they are no longer required (since you pay only for the time the Hadoop cluster instances are running this provides a super cost effective way to use them). You can create Hadoop clusters using either the Windows Azure Management Portal (see below) or using our PowerShell and Cross Platform Command line tools: The import/export hard drive support that came out today is a perfect companion service to use with HDInsight – the combination allows you to easily ingest, process and optionally export a limitless amount of data. We’ve also integrated HDInsight with our Business Intelligence tools, so users can leverage familiar tools like Excel in order to analyze the output of jobs. You can find out more about how to get started with HDInsight here. Virtual Machines: VM Gallery Enhancements Today’s update of Windows Azure brings with it a new Virtual Machine gallery that you can use to create new VMs in the cloud. You can launch the gallery by doing New->Compute->Virtual Machine->From Gallery within the Windows Azure Management Portal: The new Virtual Machine Gallery includes some nice enhancements that make it even easier to use: Search: You can now easily search and filter images using the search box in the top-right of the dialog. For example, simply type “SQL” and we’ll filter to show those images in the gallery that contain that substring. Category Tree-view: Each month we add more built-in VM images to the gallery. You can continue to browse these using the “All” view within the VM Gallery – or now quickly filter them using the category tree-view on the left-hand side of the dialog. For example, by selecting “Oracle” in the tree-view you can now quickly filter to see the official Oracle supplied images. MSDN and Supported checkboxes: With today’s update we are also introducing filters that makes it easy to filter out types of images that you may not be interested in. The first checkbox is MSDN: using this filter you can exclude any image that is not part of the Windows Azure benefits for MSDN subscribers (which have highly discounted pricing - you can learn more about the MSDN pricing here). The second checkbox is Supported: this filter will exclude any image that contains prerelease software, so you can feel confident that the software you choose to deploy is fully supported by Windows Azure and our partners. Sort options: We sort gallery images by what we think customers are most interested in, but sometimes you might want to sort using different views. So we’re providing some additional sort options, like “Newest,” to customize the image list for what suits you best. Pricing information: We now provide additional pricing information about images and options on how to cost effectively run them directly within the VM Gallery. The above improvements make it even easier to use the VM Gallery and quickly create launch and run Virtual Machines in the cloud. Virtual Machines: ACL Support for VIPs A few months ago we exposed the ability to configure Access Control Lists (ACLs) for Virtual Machines using Windows PowerShell cmdlets and our Service Management API. With today’s release, you can now configure VM ACLs using the Windows Azure Management Portal as well. You can now do this by clicking the new Manage ACL command in the Endpoints tab of a virtual machine instance: This will enable you to configure an ordered list of permit and deny rules to scope the traffic that can access your VM’s network endpoints. For example, if you were on a virtual network, you could limit RDP access to a Windows Azure virtual machine to only a few computers attached to your enterprise. Or if you weren’t on a virtual network you could alternatively limit traffic from public IPs that can access your workloads: Here is the default behaviors for ACLs in Windows Azure: By default (i.e. no rules specified), all traffic is permitted. When using only Permit rules, all other traffic is denied. When using only Deny rules, all other traffic is permitted. When there is a combination of Permit and Deny rules, all other traffic is denied. Lastly, remember that configuring endpoints does not automatically configure them within the VM if it also has firewall rules enabled at the OS level. So if you create an endpoint using the Windows Azure Management Portal, Windows PowerShell, or REST API, be sure to also configure your guest VM firewall appropriately as well. Web Sites: Web Sockets Support With today’s release you can now use Web Sockets with Windows Azure Web Sites. This feature enables you to easily integrate real-time communication scenarios within your web based applications, and is available at no extra charge (it even works with the free tier). Higher level programming libraries like SignalR and socket.io are also now supported with it. You can enable Web Sockets support on a web site by navigating to the Configure tab of a Web Site, and by toggling Web Sockets support to “on”: Once Web Sockets is enabled you can start to integrate some really cool scenarios into your web applications. Check out the new SignalR documentation hub on www.asp.net to learn more about some of the awesome scenarios you can do with it. Web Sites: Remote Debugging Support The Windows Azure SDK 2.2 we released two weeks ago introduced remote debugging support for Windows Azure Cloud Services. With today’s Windows Azure release we are extending this remote debugging support to also work with Windows Azure Web Sites. With live, remote debugging support inside of Visual Studio, you are able to have more visibility than ever before into how your code is operating live in Windows Azure. It is now super easy to attach the debugger and quickly see what is going on with your application in the cloud. Remote Debugging of a Windows Azure Web Site using VS 2013 Enabling the remote debugging of a Windows Azure Web Site using VS 2013 is really easy. Start by opening up your web application’s project within Visual Studio. Then navigate to the “Server Explorer” tab within Visual Studio, and click on the deployed web-site you want to debug that is running within Windows Azure using the Windows Azure->Web Sites node in the Server Explorer. Then right-click and choose the “Attach Debugger” option on it: When you do this Visual Studio will remotely attach the debugger to the Web Site running within Windows Azure. The debugger will then stop the web site’s execution when it hits any break points that you have set within your web application’s project inside Visual Studio. For example, below I set a breakpoint on the “ViewBag.Message” assignment statement within the HomeController of the standard ASP.NET MVC project template. When I hit refresh on the “About” page of the web site within the browser, the breakpoint was triggered and I am now able to debug the app remotely using Visual Studio: Note above how we can debug variables (including autos/watchlist/etc), as well as use the Immediate and Command Windows. In the debug session above I used the Immediate Window to explore some of the request object state, as well as to dynamically change the ViewBag.Message property. When we click the the “Continue” button (or press F5) the app will continue execution and the Web Site will render the content back to the browser. This makes it super easy to debug web apps remotely. Tips for Better Debugging To get the best experience while debugging, we recommend publishing your site using the Debug configuration within Visual Studio’s Web Publish dialog. This will ensure that debug symbol information is uploaded to the Web Site which will enable a richer debug experience within Visual Studio. You can find this option on the Web Publish dialog on the Settings tab: When you ultimately deploy/run the application in production we recommend using the “Release” configuration setting – the release configuration is memory optimized and will provide the best production performance. To learn more about diagnosing and debugging Windows Azure Web Sites read our new Troubleshooting Windows Azure Web Sites in Visual Studio guide. Notification Hubs: Segmented Push Notification support with tag expressions In August we announced the General Availability of Windows Azure Notification Hubs - a powerful Mobile Push Notifications service that makes it easy to send high volume push notifications with low latency from any mobile app back-end. Notification hubs can be used with any mobile app back-end (including ones built using our Mobile Services capability) and can also be used with back-ends that run in the cloud as well as on-premises. Beginning with the initial release, Notification Hubs allowed developers to send personalized push notifications to both individual users as well as groups of users by interest, by associating their devices with tags representing the logical target of the notification. For example, by registering all devices of customers interested in a favorite MLB team with a corresponding tag, it is possible to broadcast one message to millions of Boston Red Sox fans and another message to millions of St. Louis Cardinals fans with a single API call respectively. New support for using tag expressions to enable advanced customer segmentation With today’s release we are adding support for even more advanced customer targeting. You can now identify customers that you want to send push notifications to by defining rich tag expressions. With tag expressions, you can now not only broadcast notifications to Boston Red Sox fans, but take that segmenting a step farther and reach more granular segments. This opens up a variety of scenarios, for example: Offers based on multiple preferences—e.g. send a game day vegetarian special to users tagged as both a Boston Red Sox fan AND a vegetarian Push content to multiple segments in a single message—e.g. rain delay information only to users who are tagged as either a Boston Red Sox fan OR a St. Louis Cardinal fan Avoid presenting subsets of a segment with irrelevant content—e.g. season ticket availability reminder to users who are tagged as a Boston Red Sox fan but NOT also a season ticket holder To illustrate with code, consider a restaurant chain app that sends an offer related to a Red Sox vs Cardinals game for users in Boston. Devices can be tagged by your app with location tags (e.g. “Loc:Boston”) and interest tags (e.g. “Follows:RedSox”, “Follows:Cardinals”), and then a notification can be sent by your back-end to “(Follows:RedSox || Follows:Cardinals) && Loc:Boston” in order to deliver an offer to all devices in Boston that follow either the RedSox or the Cardinals. This can be done directly in your server backend send logic using the code below: var notification = new WindowsNotification(messagePayload); hub.SendNotificationAsync(notification, "(Follows:RedSox || Follows:Cardinals) && Loc:Boston"); In your expressions you can use all Boolean operators: AND (&&), OR (||), and NOT (!). Some other cool use cases for tag expressions that are now supported include: Social: To “all my group except me” - group:id && !user:id Events: Touchdown event is sent to everybody following either team or any of the players involved in the action: Followteam:A || Followteam:B || followplayer:1 || followplayer:2 … Hours: Send notifications at specific times. E.g. Tag devices with time zone and when it is 12pm in Seattle send to: GMT8 && follows:thaifood Versions and platforms: Send a reminder to people still using your first version for Android - version:1.0 && platform:Android For help on getting started with Notification Hubs, visit the Notification Hub documentation center. Then download the latest NuGet package (or use the Notification Hubs REST APIs directly) to start sending push notifications using tag expressions. They are really powerful and enable a bunch of great new scenarios. TFS & GIT: Continuous Delivery Support for Web Sites + Cloud Services With today’s Windows Azure release we are making it really easy to enable continuous delivery support with Windows Azure and Team Foundation Services. Team Foundation Services is a cloud based offering from Microsoft that provides integrated source control (with both TFS and Git support), build server, test execution, collaboration tools, and agile planning support. It makes it really easy to setup a team project (complete with automated builds and test runners) in the cloud, and it has really rich integration with Visual Studio. With today’s Windows Azure release it is now really easy to enable continuous delivery support with both TFS and Git based repositories hosted using Team Foundation Services. This enables a workflow where when code is checked in, built successfully on an automated build server, and all tests pass on it – I can automatically have the app deployed on Windows Azure with zero manual intervention or work required. The below screen-shots demonstrate how to quickly setup a continuous delivery workflow to Windows Azure with a Git-based ASP.NET MVC project hosted using Team Foundation Services. Enabling Continuous Delivery to Windows Azure with Team Foundation Services The project I’m going to enable continuous delivery with is a simple ASP.NET MVC project whose source code I’m hosting using Team Foundation Services. I did this by creating a “SimpleContinuousDeploymentTest” repository there using Git – and then used the new built-in Git tooling support within Visual Studio 2013 to push the source code to it. Below is a screen-shot of the Git repository hosted within Team Foundation Services: I can access the repository within Visual Studio 2013 and easily make commits with it (as well as branch, merge and do other tasks). Using VS 2013 I can also setup automated builds to take place in the cloud using Team Foundation Services every time someone checks in code to the repository: The cool thing about this is that I don’t have to buy or rent my own build server – Team Foundation Services automatically maintains its own build server farm and can automatically queue up a build for me (for free) every time someone checks in code using the above settings. This build server (and automated testing) support now works with both TFS and Git based source control repositories. Connecting a Team Foundation Services project to Windows Azure Once I have a source repository hosted in Team Foundation Services with Automated Builds and Testing set up, I can then go even further and set it up so that it will be automatically deployed to Windows Azure when a source code commit is made to the repository (assuming the Build + Tests pass). Enabling this is now really easy. To set this up with a Windows Azure Web Site simply use the New->Compute->Web Site->Custom Create command inside the Windows Azure Management Portal. This will create a dialog like below. I gave the web site a name and then made sure the “Publish from source control” checkbox was selected: When we click next we’ll be prompted for the location of the source repository. We’ll select “Team Foundation Services”: Once we do this we’ll be prompted for our Team Foundation Services account that our source repository is hosted under (in this case my TFS account is “scottguthrie”): When we click the “Authorize Now” button we’ll be prompted to give Windows Azure permissions to connect to the Team Foundation Services account. Once we do this we’ll be prompted to pick the source repository we want to connect to. Starting with today’s Windows Azure release you can now connect to both TFS and Git based source repositories. This new support allows me to connect to the “SimpleContinuousDeploymentTest” respository we created earlier: Clicking the finish button will then create the Web Site with the continuous delivery hooks setup with Team Foundation Services. Now every time someone pushes source control to the repository in Team Foundation Services, it will kick off an automated build, run all of the unit tests in the solution , and if they pass the app will be automatically deployed to our Web Site in Windows Azure. You can monitor the history and status of these automated deployments using the Deployments tab within the Web Site: This enables a really slick continuous delivery workflow, and enables you to build and deploy apps in a really nice way. Developer Analytics: New Relic support for Web Sites + Mobile Services With today’s Windows Azure release we are making it really easy to enable Developer Analytics and Monitoring support with both Windows Azure Web Site and Windows Azure Mobile Services. We are partnering with New Relic, who provide a great dev analytics and app performance monitoring offering, to enable this - and we have updated the Windows Azure Management Portal to make it really easy to configure. Enabling New Relic with a Windows Azure Web Site Enabling New Relic support with a Windows Azure Web Site is now really easy. Simply navigate to the Configure tab of a Web Site and scroll down to the “developer analytics” section that is now within it: Clicking the “add-on” button will display some additional UI. If you don’t already have a New Relic subscription, you can click the “view windows azure store” button to obtain a subscription (note: New Relic has a perpetually free tier so you can enable it even without paying anything): Clicking the “view windows azure store” button will launch the integrated Windows Azure Store experience we have within the Windows Azure Management Portal. You can use this to browse from a variety of great add-on services – including New Relic: Select “New Relic” within the dialog above, then click the next button, and you’ll be able to choose which type of New Relic subscription you wish to purchase. For this demo we’ll simply select the “Free Standard Version” – which does not cost anything and can be used forever: Once we’ve signed-up for our New Relic subscription and added it to our Windows Azure account, we can go back to the Web Site’s configuration tab and choose to use the New Relic add-on with our Windows Azure Web Site. We can do this by simply selecting it from the “add-on” dropdown (it is automatically populated within it once we have a New Relic subscription in our account): Clicking the “Save” button will then cause the Windows Azure Management Portal to automatically populate all of the needed New Relic configuration settings to our Web Site: Deploying the New Relic Agent as part of a Web Site The final step to enable developer analytics using New Relic is to add the New Relic runtime agent to our web app. We can do this within Visual Studio by right-clicking on our web project and selecting the “Manage NuGet Packages” context menu: This will bring up the NuGet package manager. You can search for “New Relic” within it to find the New Relic agent. Note that there is both a 32-bit and 64-bit edition of it – make sure to install the version that matches how your Web Site is running within Windows Azure (note: you can configure your Web Site to run in either 32-bit or 64-bit mode using the Web Site’s “Configuration” tab within the Windows Azure Management Portal): Once we install the NuGet package we are all set to go. We’ll simply re-publish the web site again to Windows Azure and New Relic will now automatically start monitoring the application Monitoring a Web Site using New Relic Now that the application has developer analytics support with New Relic enabled, we can launch the New Relic monitoring portal to start monitoring the health of it. We can do this by clicking on the “Add Ons” tab in the left-hand side of the Windows Azure Management Portal. Then select the New Relic add-on we signed-up for within it. The Windows Azure Management Portal will provide some default information about the add-on when we do this. Clicking the “Manage” button in the tray at the bottom will launch a new browser tab and single-sign us into the New Relic monitoring portal associated with our account: When we do this a new browser tab will launch with the New Relic admin tool loaded within it: We can now see insights into how our app is performing – without having to have written a single line of monitoring code. The New Relic service provides a ton of great built-in monitoring features allowing us to quickly see: Performance times (including browser rendering speed) for the overall site and individual pages. You can optionally set alert thresholds to trigger if the speed does not meet a threshold you specify. Information about where in the world your customers are hitting the site from (and how performance varies by region) Details on the latency performance of external services your web apps are using (for example: SQL, Storage, Twitter, etc) Error information including call stack details for exceptions that have occurred at runtime SQL Server profiling information – including which queries executed against your database and what their performance was And a whole bunch more… The cool thing about New Relic is that you don’t need to write monitoring code within your application to get all of the above reports (plus a lot more). The New Relic agent automatically enables the CLR profiler within applications and automatically captures the information necessary to identify these. This makes it super easy to get started and immediately have a rich developer analytics view for your solutions with very little effort. If you haven’t tried New Relic out yet with Windows Azure I recommend you do so – I think you’ll find it helps you build even better cloud applications. Following the above steps will help you get started and deliver you a really good application monitoring solution in only minutes. Service Bus: Support for partitioned queues and topics With today’s release, we are enabling support within Service Bus for partitioned queues and topics. Enabling partitioning enables you to achieve a higher message throughput and better availability from your queues and topics. Higher message throughput is achieved by implementing multiple message brokers for each partitioned queue and topic. The multiple messaging stores will also provide higher availability. You can create a partitioned queue or topic by simply checking the Enable Partitioning option in the custom create wizard for a Queue or Topic: Read this article to learn more about partitioned queues and topics and how to take advantage of them today. Billing: New Billing Alert Service Today’s Windows Azure update enables a new Billing Alert Service Preview that enables you to get proactive email notifications when your Windows Azure bill goes above a certain monetary threshold that you configure. This makes it easier to manage your bill and avoid potential surprises at the end of the month. With the Billing Alert Service Preview, you can now create email alerts to monitor and manage your monetary credits or your current bill total. To set up an alert first sign-up for the free Billing Alert Service Preview. Then visit the account management page, click on a subscription you have setup, and then navigate to the new Alerts tab that is available: The alerts tab allows you to setup email alerts that will be sent automatically once a certain threshold is hit. For example, by clicking the “add alert” button above I can setup a rule to send myself email anytime my Windows Azure bill goes above $100 for the month: The Billing Alert Service will evolve to support additional aspects of your bill as well as support multiple forms of alerts such as SMS. Try out the new Billing Alert Service Preview today and give us feedback. Summary Today’s Windows Azure release enables a ton of great new scenarios, and makes building applications hosted in the cloud even easier. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today. Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article

CodePlex Daily Summary for Tuesday, April 20, 2010

CodePlex Daily Summary for Tuesday, April 20, 2010New ProjectsASP.NET MVC Extensibility: ASP.NET MVC Extensibility.ASP.NET MVC Starter: Tekpub's ASP.NET MVC 2.0 Starter Site, as put together by Rob Conery in Episode 15 of Mastering ASP.NET MVC (http://tekpub.com/production/starter)AzureDemo: An internal Azure demo and test bed for some projects. After demo is complete this project will be closed.Basic Sprite Sheet Creator: A basic c# program to create sprite sheets. CodeDefender: Protect your .Net codes easily with this smart obfuscator!Crawlr: Tema 2 projectDocument Session Manager - Visual Studio addin: Document Session Manager is a Visual Studio 2008 addin for saving and restoring the list of opened documents (xml files, source files, winforms, et...Esferatec.Text.RegularExpressions: assembly to build regular expression patternsFIFA World Cup 2010 Mobile Sticker Checklist: FIFA World Cup 2010 Mobile Sticker Checklist is a small application for Windows Mobile developed in CF 3.5 to keep tracking of your sticker album. ...Finia.net: 追忆游乐网·幻之大地FusspawnsAI: Fusspawns UT AI is a small test engine for a classic ut remote bot api. intending to improve ut's ai to a god like level without cheating bots(bots...G.A.E.T.: This is a Graphical Asymmetric Encryption Tool based on R.S.A. algorithm with the help of Java Language.Even though, this may be a small applicatio...ItzyBitzySpider: Webcrawler project from computer science at UCN.JingQiao.Ads: My DDD NTier Architecture example project.Managed Meizu SDK Demo: In this project we are sharing the source code to demonstrate the usage of managed SDK for Meizu cell phones, currently for M8. With the help of th...MaxxUtils.MaxxTagger: MaxxTagger: An Mp3 Tag Editor.. Add /Edit/Remove MP3 ID3 V1 and 2.3 Tags like Title, Artist, Album, Album Art, Genre. Besides tag editing, it also ...Maya Project Management: The Maya Project Management is a clone of RedMine with all its functions and plug-in support, using the following technologies: Microsoft .net Fra...MessageBoxLib: A simple, robust library for Xbox 360 and Windows development using the XNA Game Studio that makes using the Guide class's message box functionalit...MyWSAT - ASP.NET Membership Administration Tool: MyWSAT aka ASP.NET WSAT is a WebForms based website Starter Kit for the ASP.NET Membership Provider. It is a feature rich application that takes ca...OntologyCreator: this is my thesis and it is not finished yetPOS for .Net Handheld Products Service Object: POS for .Net Service Object Handheld Products Bar Code ScannerPostBinder: PostBinder is a small helper library that deserializes ASP.NET requests into C# classes. This eliminates having to write repeated hand wiring co...PostSharp for ASP.NET Web Sites: Adds support for PostSharp 2.0 on ASP.NET Web Sites.Rapid Dictionary: * Rapid Dictionary is a Translation Dictionary initialized by language learning network http://wordsteps.com. * Dictionary developed in C# and Co...ROrganizer: If you feel your movie files are kept in messy way, try out the ROrganizer which helps you rearrange them.RoRoWoBlog: 萝萝窝个人博客开源项目SPGroupDeflector - Explicitly deny groups to webs within your Site Collection: Secure webs within your MOSS or WSS Portal by explicitly denying access to specific users in SharePoint groups.SSIS ShapeFileSource: SSIS ShapeFileSource imports ESRI Shapefiles, and the associated attribute file (.dbf). The component based on the free Shapefile C Library.StoreManagement: University assignment. The task is to build an application that can perform basic CRUD operations on a property and use an arbitrary database. ...Surfium: TODO ;-)TaskCleaner: This is a Windows Forms project created to kill some running process in order to enhace the performance of Windows execution. Sometimes it is desi...The Expert Calendar: The Expert Calendar is a MOSS 2007 webpart which allows to connect to a Event Item List and display event items in a small design customizable cale...Visual Studio Find Results Window Tweak: This is a Visual Studio 2010 add-in which enables you to adjust the format of the Find Results Window. It is written in C#, .NET 4.0 and requires ...Weightlifting Sinclair coeficient calculator: Weightlifting Sinclair coeficient calculator for competitors (for Windows Mobile platform)Windows Azure Web Storage Explorer: Windows Azure Web Storage Explorer makes it easier for developers to browse and manage Blobs, Queues and Tables from Windows Azure Storage account....New Releases#SNMP - C# Based Open Source SNMP for .NET and Mono: CatPaw (5.0) Beta 1: SNMP v3 support in snmpd is complete.ASP.Net MVC Crud with JqGrid: Mvc Crud with JqGrid 0.3.0: Fairly major reworking of the GenericDataGrid (with alot of work from James). Most noticeable is the replacing of Edit and Delete with action butt...Basic Sprite Sheet Creator: Sprite Tool v1.1: Fixed the progress bar, it now correctly displays text and progress. Also download will now come with an installer and an executable so you don't h...Basic Sprite Sheet Creator: Sprite Tool Version 1.0: Program used to make basic sprite sheets. please visit http://coderplex.blogspot.com for more infoBraintree Client Library: Braintree-1.2.1: Escape all XMLCodeDefender: CodeDefender v0.1: Protect your .Net exe and dll files with this smart tool.ColinTesting: test: testColinTesting: test2: test2ColinTesting: test3: test3ColinTesting: test4: test4ColinTesting: test6: test6CycleMania Starter Kit EAP - ASP.NET 4 Problem - Design - Solution: Cyclemania 0.08.63: See Source Code tab for recent change history.Document Session Manager - Visual Studio addin: Release v0.45948: Release v0.45948DotNetNuke® Community Edition: 05.04.00: Major Highlights Fixed issue where portal settings were not saved per portal. Fixed issue with importing page templates. Fixed issue with...DotNetNuke® Postgres Data Provider: DNN PG Provider 01.00.00 Beta2: Fixes problems with deprecated datatype money in Postgres. Upgrades DotnetNuke code base to 04.09.05 It comes with a patch for the DotNetNuke insta...FIFA World Cup 2010 Mobile Sticker Checklist: FIFA World Cup 2010 Mobile Sticker Checklist v0.1b: FIFA World Cup 2010 Mobile Sticker Checklist v0.1b First beta release. Requires Microsoft Compact Framework 3.5. It was tested on an HTC Touch Viva...FIFA World Cup 2010 Mobile Sticker Checklist: FIFA World Cup 2010 Mobile Sticker Checklist v0.2b: FIFA World Cup 2010 Mobile Sticker Checklist v0.2b Second beta release. Requires Microsoft Compact Framework 3.5. It was tested on an HTC Touch Viv...Fluent Ribbon Control Suite: Fluent Ribbon Control Suite 1.2: Fluent Ribbon Control Suite 1.2(supports .NET 3.5 and .NET 4 RTM) Includes: Fluent.dll (with .pdb and .xml) Showcase Application Samples Found...G.A.E.T.: Graphical Asymmetric Encryption Tool: User Interface The GAET User Interface is a window with five buttons. Each button is explained the following sections. Each button has a functional...HTML Ruby: 6.21.7: As long as I don't find anything else that I can improve, this will be submitted to Mozilla for review tomorrow. Added back process inserted conten...IBCSharp: IBCSharp 1.03: What IBCSharp 1.03.zip unzips to: http://i43.tinypic.com/24ffbqr.png Note: The above solution has MSTest, Typemock Isolator, and Microsoft CHESS c...LogikBug's IoC Container: Second Release: This project is dependent upon Microsoft.Practices.ServiceLocation and must be referenced when referencing LogikBug.Injection. Click here to view d...Managed Meizu SDK Demo: Library and Demo: Library and DemoMaxxUtils.MaxxTagger: MaxxUtils.MaxxTagger: Version: 1.0.0 (Beta) Instructions: Unzip the files to a folder and then dbl click on the exe. Known Issues: 1. When u copy or move a folde...OrthoLab: Cellule: Compile with Autodesk Maya 2008 32bit and 2010 64bit.OWASP Code Crawler: OWASP Code Crawler 2.7: Code Crawler 2.7 DescriptionIn terms of functionality there is not much new stuff in this release. We transplanted the new engine. Code Crawler is ...PerceptiveMCAPI - A .NET wrapper for the MailChimp Api: V1.2.3 PerceptiveMCAPI .Net Wrapper [Beta 2]: PerceptiveMCAPI – v 1.2.3 Change logFunctionality through MailChimp API announce v1.2.5 on 15-Feb-2010 .NET Wrapper New wrapper directives; api_Me...POS for .Net Handheld Products Service Object: POS for .Net Handhelp Products Service Object: The Service Object contained herein is a work in progress. This Service Object's is written as VS 2008 C# Project. The Target Platform is x86. ...PostSharp for ASP.NET Web Sites: R1: First release.Rich Ajax empowered Web/Cloud Applications: 6.4 beta 2c: A revisiov to the first fully featured version of Visual webGui offering web/cloud development tool that puts all ASP.NET Ajax limits behind with e...Should: Beta - 1.0: This is the initial release of the Should assertions extensions.Shrinkr: v1.0: First public release.Site Directory for SharePoint 2010 (from Microsoft Consulting Services, UK): v1.2: Address a bug found in v1.1 relating to the Delete Site Listings job not incrementing the 'Site Missing Count' for some SharePoint sites.Software Localization Tool: SharpSLT 1.0: New functions Backup before saving Delete entries Undo deletion Added more comments in the codeSPGroupDeflector - Explicitly deny groups to webs within your Site Collection: SPGroupDeflector: Download the source code, the wsp solution package, and Setup.docSSIS ShapeFileSource: Version 0.1: Short Preview of SSIS ShapeFileSource ComponentStarter Kit Mytrip.Mvc.Entity: Mytrip.Mvc.Entity 1.0: Warning Install MySql Connector/Net 6.3 MySQL Membership MSSQL Membership XML Membership UserManager FileManager Localization Captcha ...Surfium: Linux Expo Prebuild: First public releaseTaskCleaner: Initial Working Version: In this version we have all the features listed in the project description working fine. Built under Framework 3.5.Text to HTML: 0.4.5.0: CambiosSustitución de los siguientes caracteres: Anteriores: " < > ¡ © º ¿ Á Ä É Í Ñ Ó Ö Ú Ü ß á ä é í ñ ó ö ú ü € Nuevos: & ´ ≈ ¦ • ¸ ˆ ↓ ð … ∫ ...TS3QueryLib.Net: TS3QueryLib.Net Version 0.21.16.0: This release contains a bugfix for a bug that caused connection problems when connecting using an IP for some cases. So it's strongly recommended t...Tweety - Twitter Client: Tweety - 0.96: Form activation from system tray improved. General fixes. General code refactor.Web/Cloud Applications Development Framework | Visual WebGui: 6.4 Beta 2c: A revision to the first fully featured version of Visual webGui offering unique developer/designer interface and enhanced extensibility and customi...Windows Azure - PHP contributions: PhpAzureExtensions (Azure Drives) - 0.2.0: Extension for use with Windows Azure SDK 1.1! Breaking changes! Documentation can be found at http://phpazurecontrib.codeplex.com/wikipage?title=A...WoW Character Viewer: Viewer (40545): New setup build for 40545.Xrns2XMod: Xrns2XMod 0.0.5.3: Major Source code optimization: >> Separated logical code of xm/mod conversion from renoiseSong xml. Now all necessary renoise song data code is st...XsltDb - DotNetNuke XSLT module: 01.00.99: callable tag is introduced - create javascript ajax functions more easy import/export bug is fixed mdo:ajax checkbox processing is now the same...Most Popular ProjectsRawrWBFS ManagerSilverlight ToolkitAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseWindows Presentation Foundation (WPF)ASP.NETpatterns & practices – Enterprise LibraryPHPExcelMicrosoft SQL Server Community & SamplesMost Active ProjectsRawrpatterns & practices – Enterprise LibraryIndustrial DashboardIonics Isapi Rewrite FilterFarseer Physics EngineBlogEngine.NETPHPExcelCaliburn: An Application Framework for WPF and SilverlightNB_Store - Free DotNetNuke Ecommerce Catalog ModuleTweetSharp

Read the article

Synchronize Data between a Silverlight ListBox and a User Control

- by psheriff

One of the great things about XAML is the powerful data-binding capabilities. If you load up a list box with a collection of objects, you can display detail data about each object without writing any C# or VB.NET code. Take a look at Figure 1 that shows a collection of Product objects in a list box. When you click on a list box you bind the current Product object selected in the list box to a set of controls in a user control with just a very simple Binding statement in XAML. Figure 1: Synchronizing a ListBox to a User Control is easy with Data Binding Product and Products Classes To illustrate this data binding feature I am going to just create some local data instead of using a WCF service. The code below shows a Product class that has three properties, namely, ProductId, ProductName and Price. This class also has a constructor that takes 3 parameters and allows us to set the 3 properties in an instance of our Product class. C#public class Product{ public Product(int productId, string productName, decimal price) { ProductId = productId; ProductName = productName; Price = price; } public int ProductId { get; set; } public string ProductName { get; set; } public decimal Price { get; set; }} VBPublic Class Product Public Sub New(ByVal _productId As Integer, _ ByVal _productName As String, _ ByVal _price As Decimal) ProductId = _productId ProductName = _productName Price = _price End Sub Private mProductId As Integer Private mProductName As String Private mPrice As Decimal Public Property ProductId() As Integer Get Return mProductId End Get Set(ByVal value As Integer) mProductId = value End Set End Property Public Property ProductName() As String Get Return mProductName End Get Set(ByVal value As String) mProductName = value End Set End Property Public Property Price() As Decimal Get Return mPrice End Get Set(ByVal value As Decimal) mPrice = value End Set End PropertyEnd Class To fill up a list box you need a collection class of Product objects. The code below creates a generic collection class of Product objects. In the constructor of the Products class I have hard-coded five product objects and added them to the collection. In a real-world application you would get your data through a call to service to fill the list box, but for simplicity and just to illustrate the data binding, I am going to just hard code the data. C#public class Products : List<Product>{ public Products() { this.Add(new Product(1, "Microsoft VS.NET 2008", 1000)); this.Add(new Product(2, "Microsoft VS.NET 2010", 1000)); this.Add(new Product(3, "Microsoft Silverlight 4", 1000)); this.Add(new Product(4, "Fundamentals of N-Tier eBook", 20)); this.Add(new Product(5, "ASP.NET Security eBook", 20)); }} VBPublic Class Products Inherits List(Of Product) Public Sub New() Me.Add(New Product(1, "Microsoft VS.NET 2008", 1000)) Me.Add(New Product(2, "Microsoft VS.NET 2010", 1000)) Me.Add(New Product(3, "Microsoft Silverlight 4", 1000)) Me.Add(New Product(4, "Fundamentals of N-Tier eBook", 20)) Me.Add(New Product(5, "ASP.NET Security eBook", 20)) End SubEnd Class The Product Detail User Control Below is a user control (named ucProduct) that is used to display the product detail information seen in the bottom portion of Figure 1. This is very basic XAML that just creates a text block and a text box control for each of the three properties in the Product class. Notice the {Binding Path=[PropertyName]} on each of the text box controls. This means that if the DataContext property of this user control is set to an instance of a Product class, then the data in the properties of that Product object will be displayed in each of the text boxes. <UserControl x:Class="SL_SyncListBoxAndUserControl_CS.ucProduct" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" HorizontalAlignment="Left" VerticalAlignment="Top"> <Grid Margin="4"> <Grid.RowDefinitions> <RowDefinition Height="Auto" /> <RowDefinition Height="Auto" /> <RowDefinition Height="Auto" /> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition MinWidth="120" /> <ColumnDefinition /> </Grid.ColumnDefinitions> <TextBlock Grid.Row="0" Grid.Column="0" Text="Product Id" /> <TextBox Grid.Row="0" Grid.Column="1" Text="{Binding Path=ProductId}" /> <TextBlock Grid.Row="1" Grid.Column="0" Text="Product Name" /> <TextBox Grid.Row="1" Grid.Column="1" Text="{Binding Path=ProductName}" /> <TextBlock Grid.Row="2" Grid.Column="0" Text="Price" /> <TextBox Grid.Row="2" Grid.Column="1" Text="{Binding Path=Price}" /> </Grid></UserControl> Synchronize ListBox with User Control You are now ready to fill the list box with the collection class of Product objects and then bind the SelectedItem of the list box to the Product detail user control. The XAML below is the complete code for Figure 1. <UserControl x:Class="SL_SyncListBoxAndUserControl_CS.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:src="clr-namespace:SL_SyncListBoxAndUserControl_CS" VerticalAlignment="Top" HorizontalAlignment="Left"> <UserControl.Resources> <src:Products x:Key="productCollection" /> </UserControl.Resources> <Grid x:Name="LayoutRoot" Margin="4" Background="White"> <Grid.RowDefinitions> <RowDefinition Height="Auto" /> <RowDefinition Height="*" /> </Grid.RowDefinitions> <ListBox x:Name="lstData" Grid.Row="0" BorderBrush="Black" BorderThickness="1" ItemsSource="{Binding Source={StaticResource productCollection}}" DisplayMemberPath="ProductName" /> <src:ucProduct x:Name="prodDetail" Grid.Row="1" DataContext="{Binding ElementName=lstData, Path=SelectedItem}" /> </Grid></UserControl> The first step to making this happen is to reference the Silverlight project (SL_SyncListBoxAndUserControl_CS) where the Product and Products classes are located. I added this namespace and assigned it a namespace prefix of “src” as shown in the line below: xmlns:src="clr-namespace:SL_SyncListBoxAndUserControl_CS" Next, to use the data from an instance of the Products collection, you create a UserControl.Resources section in the XAML and add a tag that creates an instance of the Products class and assigns it a key of “productCollection”. <UserControl.Resources> <src:Products x:Key="productCollection" /> </UserControl.Resources> Next, you bind the list box to this productCollection object using the ItemsSource property. You bind the ItemsSource of the list box to the static resource named productCollection. You can then set the DisplayMemberPath attribute of the list box to any property of the Product class that you want. In the XAML below I used the ProductName property. <ListBox x:Name="lstData" ItemsSource="{Binding Source={StaticResource productCollection}}" DisplayMemberPath="ProductName" /> You now need to create an instance of the ucProduct user contol below the list box. You do this by once again referencing the “src” namespace and typing in the name of the user control. You then set the DataContext property on this user control to a binding. The binding uses the ElementName attribute to bind to the list box name, in this case “lstData”. The Path of the data is SelectedItem. These two attributes together tell Silverlight to bind the DataContext to the selected item of the list box. That selected item is a Product object. So, once this is bound, the bindings on each text box in the user control are updated and display the current product information. <src:ucProduct x:Name="prodDetail" DataContext="{Binding ElementName=lstData, Path=SelectedItem}" /> Summary Once you understand the basics of data binding in XAML, you eliminate a lot code that is otherwise needed to move data into controls and out of controls back into an object. Connecting two controls together is easy by just binding using the ElementName and Path properties of the Binding markup extension. Another good tip out of this blog is use user controls and set the DataContext of the user control to have all of the data on the user control update through the bindings. NOTE: You can download the complete sample code (in both VB and C#) at my website. http://www.pdsa.com/downloads. Choose Tips & Tricks, then "SL – Synchronize List Box Data with User Control" from the drop-down. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free eBook on "Fundamentals of N-Tier".

Read the article

SOA Community Newsletter: nouvelle lettre !

- by mseika

SOA PARTNER COMMUNITY NEWSLETTERAUGUST 2012 Dear SOA partner community member Have you submitted your feedback on SOA Partner Community Survey 2012? This is the last chance to participate in the survey. We recommend you to complete the survey and help us to improve our SOA Community. Thanks to all attendees and trainers for their participation in the excellent Fusion Middleware Summer Camps held in Lisbon and Munich. I would also like to thank you for the great feedback and the nice reports provided by AMIS Technology Blog & Middleware by Link Consulting. Most of our courses have been overbooked, if you did not get a chance or missed it, we offer a wide range of online training and the course material. Key take-away from the advanced BPM course is to become an expert in ADF. Here is the course from Grant Ronald Learn Advanced ADF online available. The Link Consulting Team became experts in SOA Governance with EAMS and Oracle Enterprise Repository! We always encourage our community members to share their best practices and are very keen to publish it. Please let us know if you want to share your best practices through this medium.We encourage you to make use of the Specialization benefits - this month we are giving an opportunity to Promote Your SOA & BPM Events. Jürgen KressOracle SOA & BPM Partner Adoption EMEA NEW CONTENT Presentations & Training material OFM Summer CampsPromote Your SOA & BPM Events Advanced ADF Online, For Free By Grant BPM 11g Customer Stories & Solution Catalog & Process Accelerators Delivering SOA Governance with EAMS by Link Consulting Team WebLogic Server Provisioning and Patching News from our Partners & CommunityUpdated material by Oracle Connect and Network SOA Blogs SOA on Facebook SOA on LinkedIn SOA on Twitter Mix SOA Forum SOA Workspace PRESENTATIONS & TRAINING MATERIAL OFM SUMMER CAMPS Thanks to all attendees who invested their time and utilized the opportunity to attend the Summer Camps! Due to high demand of our most of the trainings, we had a long waiting list with more numbers of partners who are keen to attend it. We would like to give our special thanks to all trainers, who delivered excellent workshops! Most of the presentations and course material have been posted on our SOA Community Workspaceand WebLogic Community Workspace. You can access the content only if you are a registered community member. To register for the SOA Community please click here. You can register for the WebLogic Community here. To find out the first impressions of the event please visit our Facebook pages:www.facebook.com/WebLogicCommunity &www.facebook.com/soacommunity or Picasa AlbumThanks for the excellent blog posts from AMIS Technology Blog & Middleware by Link Consulting. Let us know if you published a twitter blog on@soacommunity & @wlscommunity. We will be pleased to publish it in our Newsletters. BPM Course Quotes “Its always easy, if you know, what you are doing” - Torsten Winterberg, Opitz“ The best ideas are the ideas from the best” - Filipe Sequeria, Primesoft “Best invest in the education in the last 12 months” - Richard Schaller, IPT “Practice best practice with the best instructor” - Graham Lamond Capgemini “If you have basic BPM knowledge, this is the course to really mater it” - Diogo Henriques Link Consulting “Very good trainers lot of work. Lot of fun as well” - Matthias Gris Workflow Factory “If you like to accelerate in Oracle come to the training to bring it all together” - Marcel van der Glind, Amis ADF Course Quotes "Excellent training, great opportunity to network!" - Frank Houweling, Amis "Lots of fun and good ideas" - Ana Santiago, GFI "Learn ADF, worth it Fusion Apps is the future" - Miguel Delgadillo, STO Consulting "The best way to learn Fusion Middleware from the #1" Alexandro Montantes, STO Consulting "Be advanced to to be the first” - Dimitar Petrov Fadata "Great opportunity to suck all the knowledge out of some very experienced product managers” - Wilfred von der Deijl, The Future Group WebLogic Course Quotes “Oracle trainings are the best” - Pedro Neto Novobas“ "Excellent training, well organized” - Pedro Antunh, Capgemini “This course dives you into Oracle WebLogic giving you a quick start on benefiting from Fusion Apps” - Leonardo Fernandes, Outsystems Additional Quotes “Thanks a lot again for organizing such a great and informative Summer Camp. Both training and networking were organized very professionally. I have gained tons of very useful Info, which will definitely help to increase quality of our future projects.” - Daniel Fasko fss-group.com I didn’t get the chance yesterday to thank you for a most enjoyable and thoroughly educational time I had in Munich over the last few days.” - Jeroen Bakker Ordina “Just to congratulate you on a great event, not only today but also in the previous days of training. As we know, a very good organization and, as a native Portuguese that knows Lisbon very good, a nice choice of places to visit. Looking forward to come again next year.” Pedro Miguel Neto, Novobase PROMOTE YOUR SOA & BPM EVENTS The Partner Event Publisher has just been made available to all SOA & BPM specialized partners in EMEA. Partners now have the opportunity to publish their events to theOracle.com/events site and spread the word on their upcoming live in-person and/or live webcast events. See the demo below and click here to read more information. ADVANCED ADF ONLINE, FOR FREE BY GRANT The second part of the advanced ADF online eCourse is Live now! This covers the advanced topics of region and region interaction as well as getting down and dirty with some of the layout features of ADF Faces, skinning and DVT components. The aim of this course is to give you a self-paced learning aid which covers the more advanced topics of ADF development. The content is developed by Product Management and our Curriculum development teams and is based on advanced training material we have been running internally for about 18 months. We will get started on the next chapter, but in the meantime, please have a look at chapters one and two. Back to top BPM 11G CUSTOMER STORIES & SOLUTION CATALOG & PROCESS ACCELERATORS Stories Everyone loves a good story on planning or implementing a BPM strategy. Everyone wants to hear how it was done before?, what worked?, what was achieved? If you have achieved success with BPM, we are very keen to hear your stories and examples of how your customers use it. We receive lots of requests from people who are thinking of using BPM to solve a specific problem or in combination with a specific technology to talk to someone who has done it before. These stories are invaluable. Drop down the details of anything you think is relevant with a bit of detail and we will follow up on it. As one good deed deserves another, we will do our best to give you stories if you need them to show that where you are going, others have treaded before. Send your stories to us using this e-mail link and we will share them among other like minded people. Solution Catalogue This summer, Oracle is launching a solution catalogue specifically intended for partners. If you have delivered a successful implementation in BPM and think it could be reused and applied again in a similar scenario in the same industry or in a similar environment, then we ware keen to know about it and will add it to the solution catalogue. The solution catalogue will showcase successful BPM solutions both inside and outside Oracle. Be in touch with us on this e-mail link and we will make sure to add your solution. Process AcceleratorsFinally if you have specific processes that you are expert on, you have implemented at a customer and you want to work with us on getting these productised, then we would love to know about it. The process accelerator programme is explained in the most recent SOA/BPM Community Newsletter but again feel free to contact us if you want to get involved. Good luck with BPM and let us know how we can help. Barry O'Reilly Director BPM [email protected] DELIVERING SOA GOVERNANCE WITH EAMS BY LINK CONSULTING TEAM In the last 12 years Link Consulting has been making its presence in specific areas such as Governance and Architecture, both in terms of practices and methodologies, products, know-how and technological expertise. The Enterprise Architecture Management System - Oracle Enterprise Edition (EAMS - OER Edition) is the result of this experience and combines the architecture management solution with OER in order to deliver a product specialized for SOA Governance that gathers the better of two worlds in solution that enables SOA Governance projects, initiatives and programs. Enterprise Architecture Management System Enterprise Architecture Management System (EAMS), is an automation based solution that enables the efficient management of Enterprise Architectures. The solution uses configured enterprise repositories and takes advantages of its features to provide automation capabilities to the users. EAMS provides capabilities to create/customize/analyze repository data, architectural blueprints, reports and analytic charts. Oracle Enterprise Repository Oracle Enterprise Repository (OER) is one of the major and central elements of the Oracle SOA Governance solution. Oracle Enterprise Repository provides the tools to manage and govern the metadata for any type of software asset, from business processes and services to patterns, frameworks, applications, components, and models. OER maps the relationships and inter-dependencies that connect those assets to improve impact analysis, promote and optimize their reuse, and measure their impact on the bottom line. It provides the visibility, feedback, controls, and analytics to keep your SOA on track to deliver business value. The intense focus on automation helps to overcome barriers to SOA adoption and streamline governance throughout the lifecycle. Core capabilities of the OER include: Asset Management Asset Lifecycle Management Usage Tracking Service Discovery Version Management Dependency Analysis Portfolio Management EAMS - OER Edition The solution takes the advantages and features from both products and combines them in a symbiotic tool that enhances the quality of SOA Governance Initiatives and Programs. EAMS is able to produce a vast number of outputs by combining its analytical engine, SOA-specific configurations and the assets in OER and other related tools, catalogs and repositories. The configurations encompass not only the extendable parametrization of the metadata but also fully configurable blueprints, PowerPoint reports, charts and queries. The SOA blueprints The solution comes with a set of predefined architectural representations that help the organization better perceive their SOA landscape. More blueprints can be easily created in order to accommodate the organizations needs in terms of detail, audience and metadata. Charts & Dashboards The solution encompasses a set of predefined charts and dashboards that promote a more agile way to control and explore the assets. Time Based Visualization All representations are time bound, and with EAMS - OER you can truly govern SOA with a complete view of the Past, Present and Future; The solution delivers Gap Analysis, a project oriented approach while taking into consideration the As-Was, As-Is an To-Be. Time based visualization differentiating factors: Extensive automation and maintenance of architectural representations Organization wide solution. Easy access and navigation to and between all architectural artifacts and representations. Flexible meta-model, customization and extensibility capabilities. Lifecycle management and enforcement of the time dimension over all the repository content. Profile based customization. Comprehensive visibility Architectural alignment Friendly and striking user interfaces For more information on EAMS visit us here. For more information on SOA visit us here. WEBLOGIC SERVER PROVISIONING AND PATCHING For access to the Oracle demo systems please visit OPN and talk to your Partner Expert.SOA Suite and BPM Suite runs on WebLogic! We are pleased to announce the availability of a WebLogic Server Management demo that showcases some of the key provisioning and patching capabilities of WebLogic Server Management Pack Enterprise Edition (EE). To learn more about these features - as well as other features of the pack - please visit the pack's saleskit page.Demo Highlights The demo showcases the following capabilities: Patching Oracle WebLogic Servers Standardizing WebLogic Server Patch Rollouts Creating a WebLogic Domain Provisioning Profile Cloning a WebLogic Domain from a Provisioning Profile Deploying a Java EE Application Scaling Out an Oracle WebLogic Cluster Demo Instructions Go to the DSS website for Oracle Partners. On the Standard Demo Launchpad page, under the “Software Lifecycle Automation” section, click on the link “EM Cloud Control 12c WLS Provisioning and Patching” (tagged as “NEW”). Specific demo launchpad page contains a link to the detailed demo script with instructions on how to show the demo.

Read the article

CodePlex Daily Summary for Friday, March 04, 2011

CodePlex Daily Summary for Friday, March 04, 2011Popular ReleasesyoutubeFisher: YouTubeFisher v3.0 Beta: Adding support for more video formats including the Super HD (e.g. http://www.youtube.com/watch?v=MrrHs2bnHPA) Minor change related to the video title due to change in YouTube pageSnippet Designer: Snippet Designer 1.3.1: Snippet Designer 1.3.1 for Visual Studio 2010This is a bug fix release. Change logFixed bug where Snippet Designer would fail if you had the most recent Productivity Power Tools installed Fixed bug where "Export as Snippet" was failing in non-english locales Fixed bug where opening a new .snippet file would fail in non-english localesChiave File Encryption: Chiave 1.0: Final Relase for Chave 1.0 Stable: Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Now with added support to Windows XP! Change Log from 0.9.2 to 1.0: ==================== Added: > Added Icon Overlay for Windows 7 Taskbar Icon. >Added Thumbnail Toolbar buttons to make the navigation easier...AutoLoL: AutoLoL v1.6.3: Fixes some bugs in the previous releaseNetwork Monitor Decryption Expert: NMDecrypt 2.3: The NMDecryption Expert has been updated. In general these changes are: Updated Logging Support for multiple sessions that use the same cert with Session ID resuse. Fixed some bugs with IPv6 traffic and tunneled traffic Updated Version Info Made changes for assignment to Outercurve Foundation See the release blog for more information.DirectQ: Release 1.8.7 (RC1): Release candidate 1 of 1.8.7Chirpy - VS Add In For Handling Js, Css, DotLess, and T4 Files: Margogype Chirpy (ver 2.0): Chirpy loves Americans. Chirpy hates Americanos.ASP.NET: Sprite and Image Optimization Preview 3: The ASP.NET Sprite and Image Optimization framework is designed to decrease the amount of time required to request and display a page from a web server by performing a variety of optimizations on the page’s images. This is the third preview of the feature and works with ASP.NET Web Forms 4, ASP.NET MVC 3, and ASP.NET Web Pages (Razor) projects. The binaries are also available via NuGet: AspNetSprites-Core AspNetSprites-WebFormsControl AspNetSprites-MvcAndRazorHelper It includes the foll...Document.Editor: 2011.9: Whats new for Document.Editor 2011.9: New Templates System New Plug-in System New Replace dialog New reset settings Minor Bug Fix's, improvements and speed upsTortoiseHg: TortoiseHg 2.0: TortoiseHg 2.0 is a complete rewrite of TortoiseHg 1.1, switching from PyGtk to PyQtSandcastle Help File Builder: SHFB v1.9.2.0 Release: This release supports the Sandcastle June 2010 Release (v2.6.10621.1). It includes full support for generating, installing, and removing MS Help Viewer files. This new release is compiled under .NET 4.0, supports Visual Studio 2010 solutions and projects as documentation sources, and adds support for projects targeting the Silverlight Framework. NOTE: The included help file and the online help have not been completely updated to reflect all changes in this release. A refresh will be issue...Network Monitor Open Source Parsers: Microsoft Network Monitor Parsers 3.4.2554: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, we have added 4 new protocol parsers and updated 79 existing parsers in the NetworkMonitor_Pa...Image Resizer for Windows: Image Resizer 3 Preview 1: Prepare to have your minds blown. This is the first preview of what will eventually become 39613. There are still a lot of rough edges and plenty of areas still under construction, but for your basic needs, it should be relativly stable. Note: You will need the .NET Framework 4 installed to use this version. Below is a status report of where this release is in terms of the overall goal for version 3. If you're feeling a bit technically ambitious and want to check out some of the features th...JSON Toolkit: JSON Toolkit 1.1: updated GetAllJsonObjects() method and GetAllProperties() methods to JsonObject and Properties propertiesFacebook Graph Toolkit: Facebook Graph Toolkit 1.0: Refer to http://computerbeacon.net for Documentation and Tutorial New features:added FQL support added Expires property to Api object added support for publishing to a user's friend / Facebook Page added support for posting and removing comments on posts added support for adding and removing likes on posts and comments added static methods for Page class added support for Iframe Application Tab of Facebook Page added support for obtaining the user's country, locale and age in If...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.1: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager small improvements for some helpers and AjaxDropdown has Data like the Lookup except it's value gets reset and list refilled if any element from data gets changedManaged Extensibility Framework: MEF 2 Preview 3: This release aims .net 4.0 and Silverlight 4.0. Accordingly, there are two solutions files. The assemblies are named System.ComponentModel.Composition.Codeplex.dll as a way to avoid clashing with the version shipped with the 4th version of the framework. Introduced CompositionOptions to container instantiation CompositionOptions.DisableSilentRejection makes MEF throw an exception on composition errors. Useful for diagnostics Support for open generics Support for attribute-less registr...PHPExcel: PHPExcel 1.7.6 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.4: Version: 2.0.0.4 (Milestone 4): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...VidCoder: 0.8.2: Updated auto-naming to handle seconds and frames ranges as well. Deprecated the {chapters} token for auto-naming in favor of {range}. Allowing file drag to preview window and enabling main window shortcut keys to work no matter what window is focused. Added option in config to enable giving custom names to audio tracks. (Note that these names will only show up certain players like iTunes or on the iPod. Players that support custom track names normally may not show them.) Added tooltips ...New Projects.NET Serial To TCP proxy server: serial2tcp written to share your hardware serial ports as TCP port. You can easily turn your physical PC into terminal server. View session input/output or send commands to the physical port. Very useful when automating work with embedded devices. Developed in C#.Amazon SES SMTP: The C# code for a simple SMTP Server that forwards emails to Amazon Simple Email Service, either by acting as a SmartHost behind IIS SMTP Server or as a standalone SMTP server. It can be run in the background as either a Windows Service or a Console/Windows Application Azure Membership, Role, and Profile Providers: Complete ASP.NET solution that uses the Azure Table Storage and Azure Blob storage as a data source for a custom Membership, Role, and Profile providers. Developed in C# on the .NET 4 framework using Azure SDK V1.3. Helps you get up and running with Azure in no time. MIT license.CRM 2011 Code Snippets for Visual Studio: A set of JavaScript and C# code snippets to facilitate common Microsoft Dynamics CRM 2011 development for Visual Studio 2010.DDRMenu: DDRMenu is a templated menu provider for DotNetNuke that can produce any menu style you wish. In particular it comes with templates to upgrade a standard DNNMenu or SolPartMenu to provide true hyperlinks, SEO friendliness and animated transitions.Entity Framework CTP5 Extensions Library: The ADO.NET Entity Framework Extensions library contains a set of utility classes with additional functionality to Entity Framework CTP5.eTrader Pro: An easy-to-use, lightweight and customisable e-commerce solution developed in ASP.NET and SQL Server. Build an online shop in no time. Skin using ASP.NET themes. Localised for English and Spanish with integral CMS, order management and e-marketing tools.euler 12 problem: euler 12 problemeuler 19 problem: euler 19 problemeuler23: euler 23eXed: eXed (eXtended XML editor) is an XSD-based XML editor, i.e. it assumes that you have a working XSD file. The XSD is used to improve your editing experience, provide you with dynamic help, and validation. It is therefore not for those who want to write an XML file from scratch.FIM PowerShell Workflow Activity: The FIM WF Activity for PowerShell makes is easy to use PowerShell inside FIM workflows. The activity is also a good example of using diagnostic tracing inside FIM WF.FremyCompany Math Equation Editor: A WPF Component that can import MathML and LaTeX to be edited in a WYSIWYG word processor. It is intended to allow both visual and computer-comprehensive (formula in programming language) exportation. Scope and functionnalites are intended to be expanded over time.Geenie OS: A New Cosmos OSGeoBot: Monitoring and ControllingiRODS .NET: To be populated laterLicensePlateRecognition: A software for recognizing a car license plate number.LINQ for .NET 2.0: Backport of LINQ and Linq.Dynamic to the .NET Framework 2.0. The sources used to port it are taken from the mono project. http://ftp.novell.com/pub/mono/sources-stable/ It requires Visual Studio 2010 to compile. It won't compile on Visual Studio 2005.mobilestandards: MobileStandards project-creating a web2.0 BannerMy MVC store Implementation: My implementation of MVC music storeOrchard Localization JP: Localizing Project of Orchard. This project is intended to host localizing project to Japanes. Orchard ???????????。 ??????????、???????????????????。 ???????????。Paragon: Expands the basic functionality of the .NET Framework. It takes into consider basic defensive coding practices and reduces the common coding tasks.Project Unity: Research and EUA, spamming across the Halo-AA and Blam Game Engines, developed by Bungie LLC. This Project is NOT endorsed/supported by Bungie, Gearbox, Microsogy Game Studios In any way.Rabbit Framework: A lightweight framework for building dynamic web sites using ASP.NET Web Pages.ScrollableList: Just to make the project looking betterSharePoint Kerberos Buddy: The SharePoint Kerberos Buddy provides an intelligent client application that examines a mixed tier SharePoint environment locating commonly misconfigured Kerberos configuration elements. The application can detect errors on SharePoint, SSAS, SSRS, and on the client.SMI 2.0: This project is the creation of the next generation of the SMI app (previously written in VB6).SPChainGang: SPChainGang is a custom application aimed to simplify scanning, reporting, and fixing broken links in a SharePoint 2007 or SharePoint 2010 farm. SPProperties: SPProperties is a console app (command-line) that allows listing all properties of an SPWeb (property bag) and adding or updating properties. Relates to SharePoint site properties.State Machine DSL: State Machine DSL is extension to Visual Studio 2010 to provide simple and visualized way of programming state machines. It uses T4 Text Templates for code generation.tBrowser: Browser based on the IEuMoveDocType: uMoveDocType attempts to intelligently move your selected Umbraco Doc Type to a new parent.Virtual 8085: Virtual 8085 is a tool which enables students to run programs written in 8085 assembly language on a personal computer instead of a microprocessor kit. Virtual 8085 do not actually simulate the real hardware of Intel 8085, but it interprets the 8085 assembly language programs.WinAppTranslate: WinAppTranslate or WAT, Helps Visual Studio Programmers to translate Windows Applications. It is not based on the framework localization program… and it is a console application to run via VS post builds ????: ??????

Read the article

CodePlex Daily Summary for Wednesday, February 09, 2011

CodePlex Daily Summary for Wednesday, February 09, 2011Popular ReleasesWatchersNET.TagCloud: WatchersNET.TagCloud 01.09.03: Whats NewAdded New Skin TagTastic http://www.watchersnet.de/Portals/0/screenshots/dnn/TagCloud-TagTastic-Skin.jpg Added New Skin RoundedButton http://www.watchersnet.de/Portals/0/screenshots/dnn/TagCloud-RoundedButton-Skin.jpg changes Tag Count fixed on Tag Source Referrals Fixed Tag Count when multiple Tag Sources are usedFolder Space Quota: com_folderspacequotaV1.1: Correct Language String settingWinXound: WinXound 3.4.x (Windows - OsX - Linux): Release Notes (3.4.x) for all platforms: New: Added an internal audio player (it is automatically called when rendering to an audio file or called by the user with Ctrl+P); New: Reimplemented the orc/sco file editor (and of course also the ability to convert them to the csd format) - The default open action can be changed in the settings; New: The new untitled or imported files are now automatically saved into a temporary directory (no more need to save them before to compile); New: Add...ExtremeML: ExtremeML v1.0 Beta 3: VS solution source code updated for compatibility with VS2010 (accommodates VS2010 breaking changes in T4 template support).People's Note: People's Note 0.23: Sorry for the long pause between updates — I had my hands full. Version 0.23 makes fairly significant improvements: A bug with local note deletion has been fixed. Synchronization has been improved. A single failed note no longer stops the whole process. Unsynchronized notes are now highlighted. Added an option to display notebook title; thanks to Vovansky for the idea. Text colour has been fixed for people whose default is not black; thanks to JZerr for pointing this out. Incorrect ...Finestra Virtual Desktops: 1.1: This release adds a few more performance and graphical enhancements to 1.0. Switching desktops is now about as fast as you can blink. Desktop switching optimizations New welcome wizard for Vista/7 Fixed a few minor bugs Added a few more options to the options dialog (including ability to disable the taskbar switching)youtubeFisher: youtubeFisher 3.0 [beta]: What's new: Supports YouTube's new layout Complete internal refactoringNearforums - ASP.NET MVC forum engine: Nearforums v5.0: Version 5.0 of the ASP.NET MVC Forum Engine, containing the following improvements: .NET 4.0 as target framework using ASP.NET MVC 3. All views migrated to Razor for cleaner markup. Alternate template (Layout file) for mobile devices 4 Bug Fixes since Version 4.1 Visit the project Roadmap for more details.fuv: 1.0 release, codename Chopper Joe: features: search/replace :o to open file :s to save file :q to quitASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager html generation optimized new features for the lookup (add additional search data ) live demo went aeroEnhSim: EnhSim 2.3.6 BETA: 2.3.6 BETAThis release supports WoW patch 4.06 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 Changes since 2.3.0 ...TestApi - a library of Test APIs: TestApi v0.6: TestApi v0.6 comes with the following changes: TestApi code development has been moved to Codeplex: Moved TestApi soluton to VS 2010; Moved all source code to Codeplex. All development work is done there now. Fault Injection API: Integrated the unmanaged FaultInjectionEngine.dll COM component in the build; Cleaned up FaultInjectionEngine.dll to build at warning level 4; Implemented “FaultScope” which allows for in-process fault injection; Added automation scripts & sample program; ...AutoLoL: AutoLoL v1.5.5: AutoChat now allows up to 6 items. Items with nr. 7-0 will be removed! News page url's are now opened in the default browser Added a context menu to the system tray icon (thanks to Alex Banagos) AutoChat now allows configuring the Chat Keys and the Modifier Key The recent files list now supports compact and full mode Fix: Swapped mouse buttons are now properly detected Fix: Sometimes the Play button was pressed while still greyed out Champion: Karma Note: You can also run the u...mojoPortal: 2.3.6.2: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2362-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Rawr: Rawr 4.0.19 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...IronRuby: 1.1.2: IronRuby 1.1.2 is a servicing release that keeps on improving compatibility with Ruby 1.9.2 and includes IronRuby integration to Visual Studio 2010. We decided to drop 1.8.6 compatibility mode in all post-1.0 releases. We recommend using IronRuby 1.0 if you need 1.8.6 compatibility. In this release we fixed several major issues: - problems that blocked Gem installation in certain cases - regex syntax: the parser was replaced with a new one that is much more compatible with Ruby 1.9.2 - cras...MVVM Light Toolkit: MVVM Light Toolkit V3 SP1 (4): There was a small issue with the previous release that caused errors when installing the templates in VS10 Express. This release corrects the error. Only use this if you encountered issues when installing the previous release. No changes in the binaries.Facebook C# SDK: 5.0.2 (BETA): PLEASE TAKE A FEW MINUTES TO GIVE US SOME FEEDBACK: Facebook C# SDK Survey This is third BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. This release contains some breaking changes. Particularly with authentication. After spending time reviewing the trouble areas that people are having using th...ASP.NET MVC SiteMap provider: MvcSiteMapProvider 3.0.0 for MVC3: Using NuGet?MvcSiteMapProvider is also listed in the NuGet feed. Learn more... Like the project? Consider a donation!Donate via PayPal via PayPal. ChangelogTargeting ASP.NET MVC 3 and .NET 4.0 Additional UpdatePriority options for generating XML sitemaps Allow to specify target on SiteMapTitleAttribute One action with multiple routes and breadcrumbs Medium Trust optimizations Create SiteMapTitleAttribute for setting parent title IntelliSense for your sitemap with MvcSiteMapSchem...patterns & practices SharePoint Guidance: SharePoint Guidance 2010 Hands On Lab: SharePoint Guidance 2010 Hands On Lab consists of six labs: one for logging, one for service location, and four for application setting manager. Each lab takes about 20 minutes to walk through. Each lab consists of a PDF document. You can go through the steps in the doc to create solution and then build/deploy the solution and run the lab. For those of you who wants to save the time, we included the final solution so you can just build/deploy the solution and run the lab.New Projects.NET Proxy (netProxy): ASP.NET and Javascript proxies for accessing external content. The ASPX file can be used for returning external content over the current channel (HTTP/SSL). Used with the ASPX, the JS file can provide remote server access (no "same origin policy") with XMLHttpRequest syntax.CalCheck: CalCheck is a Calendar Checking Tool for Outlook. It opens the default Calendar and checks the items in the calendar for known problems, and for certain logic problems, etc.CBM11: CBM11 makes use of the Cosmos C# operating system project, and 6502 CPU emulation code, to provide an bootable 6502 CPU environment, complete with simulated RAM, and a built-in ML monitor.Ela, functional language: Ela is a modern functional programming language that runs on CLR and Mono. It's developed in C#.Framework for Image Processing: This is small framework of image processing tools.fuv: fuv is a programmer's editor that is an excellent replacement for vim. *All* editing is done by searching and replacing over the existing text, using regular expressions.HD44780-compatible Character LCD class: LCD class for .NET Micro Framework provides everything needed to work with HD44780-compatible Character LCD.Home Budget Planner: Home Budget PlannerMath training program: The math training program. Great for kids who started to learn addition and multiplication tables. Easy interface, friendly design. Features timer. Number of equations and a math sign are set up by user. It's developed in C#.Mefisto.NET CMS: Mefisto.NET CMS is a project of CMS, developped in ASP.NET MVC3, coupled with MEF and ENTITY FRAMEWORK. This project is respectful of good practice: - accessible - based on jquery - using css - expandable with mef Now you're interested, contact me !MongoMapper: A .NET Object Mapper for MongoDB over MongoDB C# DriverMoshpit: A companion WP7 app for Microsoft Student Partners and students interested in everything Microsoft has to offer in the Academic space.myproject_0023: test firstNonHealthServicePageSample: NonHealthServicePageSample shows how to create a HealthVault Online application without deriving from HealthServicePage. This is developed in C#.Pokemon Battle System: A battle system for a roleplaying forums. Putting Data in Cold Storage with Windows Azure Table: Historical records and blobs are two examples of data that aren't necessarily kept in relational storage forever. Use Windows Azure Table to put "completed" records into cold storage. See a detailed explanation of this C# project at: http://tinyurl.com/4ocy2aj.Python library to read/write ooxml document files: Python library to read/write ooxml document filesRemoteLogMonitor: A tool which can monitor logs in remote computer realtimeRetete: Aplicatia gestioneaza stocul unui restaurant pe baza de retete. Materia prima este introdusa in sistem prin receptii si inventar, iar la vanzare este consumata in functie de retetele configurate. Vanzarile pot fi inregistrate pe o casa de marcat folosind driver-ul DocPrint. SilverDiagram Extensions: Tutorials, utilities and samples for Silver Diagram, a fast and extendable client framework for diagrams.SoPrism: SoPrism is a Solution Visual Studio Template using best practices to build a Silverlight composite application. This template generate a full Silverlight application based on a solid architecture including the Model-View-ViewModel (MVVM) pattern and PRISM framework.TempProject: Temp project hostingWCF Data Services Toolkit: The WCF Data Services Toolkit is a set of extensions to WCF Data Services (the .NET implementation of OData) that attempt to make it easier to create OData services on top of arbitrary data stores without having deep knowledge of LINQ.Web Browser BOT.NET: To automate to manipulate form using .NET codeZombie Blogger: Zombie Blog Engine

Read the article

CodePlex Daily Summary for Sunday, April 01, 2012

CodePlex Daily Summary for Sunday, April 01, 2012Popular Releasesxyzzy+: April 1, 2012: SHA1: 6a07f0ed8d8006f26936a5bb45cf85405d8de8a4 WarningThis release is not for daily use, just for fun. keymaps are broken. (For example, C-g, #\TAB and #\RET will not work in minibuffer) dialogs are completely broken. Usual xyzzy+class lisp_object; typedef lisp_object *lisp; lsymbol *p = ldata <lsymbol, Tsymbol>::alloc (); Today's xyzzy+ref class lisp_object; typedef lisp_object ^lisp; lsymbol ^p = gcnew lsymbol (Tsymbol); PrerequisitesMicrosoft Visual C++ 2010 SP1 Redistributable Pack...VidCoder: 1.3.2: Added option for the minimum title length to scan. Added support to enable or disable LibDVDNav. Added option to prompt to delete source files after clearing successful completed items. Added option to disable remembering recent files and folders. Tweaked number box to only select all on a quick click.MJP's DirectX 11 Samples: Light Indexed Deferred Rendering: Implements light indexed deferred using per-tile light lists calculated in a compute shader, as well as a traditional deferred renderer that uses a compute shader for per-tile light culling and per-pixel shading.Extended WPF Toolkit: Extended WPF Toolkit - 1.6.0: Want an easier way to install the Extended WPF Toolkit?The Extended WPF Toolkit is available on Nuget. What's in the 1.6.0 Release?BusyIndicator ButtonSpinner Calculator CalculatorUpDown CheckListBox - Breaking Changes CheckComboBox - New Control ChildWindow CollectionEditor CollectionEditorDialog ColorCanvas ColorPicker DateTimePicker DateTimeUpDown DecimalUpDown DoubleUpDown DropDownButton IntegerUpDown Magnifier MaskedTextBox MessageBox MultiLineTex...ScriptIDE: Release 4.4: ...Media Companion: MC 3.434b Release: General This release should be the last beta for 3.4xx. If there are no major problems, by the end of the week it will upgraded to 3.500 Stable! The latest mc_com.exe should be included too! TV Bug fix - crash when using XBMC scraper for TV episodes. Bug fix - episode count update when adding new episodes. Bug fix - crash when actors name was missing. Enhanced TV scrape progress text. Enhancements made to missing episodes display. Movies Bug fix - hide "Play Trailer" when multisaev...Better Explorer: Better Explorer 2.0.0.831 Alpha: - A new release with: - many bugfixes - changed icon - added code for more failsafe registry usage on x64 systems - not needed regfix anymore - added ribbon shortcut keys - Other fixes Note: If you have problems opening system libraries, a suggestion was given to copy all of these libraries and then delete the originals. Thanks to Gaugamela for that! (see discussion here: 349015 ) Note2: I was upload again the setup due to missing file!LINQ Extensions Library: 1.0.2.7: Append and Prepend extensions (1.0.2.7) IndexOf extensions (1.0.2.7) New Align/Match extensions (1.0.2.6) Ready to use stable code with comprehensive unit tests and samples New Pivot extensions New Filter ExtensionsMonoGame - Write Once, Play Everywhere: MonoGame 2.5: The MonoGame team are pleased to announce that MonoGame v2.5 has been released. This release contains important bug fixes, implements optimisations and adds key features. MonoGame now has the capability to use OpenGLES 2.0 on Android and iOS devices, meaning it now supports custom shaders across mobile and desktop platforms. Also included in this release are native orientation animations on iOS devices and better Orientation support for Android. There have also been a lot of bug fixes since t...SQL Server Reporting Services MSBuild Tasks: Beta Release 1.1.15427: This update beta release base on feedback from a user. Also a coding error was corrected. The updates are as follows: Remove Redundant task: CreateDataSubscriptions. Updated CreateSubscriptions To handle both Subscriptions and Data-Driven Subscriptions. Also the change how the CreateSubscriptions works. If the report, for wihch if define for the subscription, already has subscription define then by default all the Subscriptions for that report are not deploy. This can be overr...Circuit Diagram: Circuit Diagram 2.0 Alpha 3: New in this release: Added components: Microcontroller Demultiplexer Flip & rotate components Open XML files from older versions of Circuit Diagram Text formatting for components New CDDX syntax Other fixesUmbraco CMS: Umbraco 5.1 CMS (Beta): Beta build for testing - please report issues at issues.umbraco.org (Latest uploaded: 5.1.0.123) What's new in 5.1? The full list of changes is on our http://progress.umbraco.org task tracking page. It shows items complete for 5.1, and 5.1 includes items for 5.0.1 and 5.0.2 listed there too. Here's two headline acts: Members5.1 adds support for backoffice editing of Members. We support the pairing up of our content type system in Hive with regular ASP.NET Membership providers (we ship a def...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.2.11: One Click Install from NuGet Changes to Version 2.1.2.11Code Changes 1. The project is now licenced under the Mozilla Public Licence 2. 2. User interface control and associated data access layer classes have been added to aid developers integrating 51Degrees.mobi into wider projects such as content management systems or web hosting management solutions. Use the following in a web form or user control to access these new UI components. <%@ Register Assembly="FiftyOne.Foundation" Namespace="...JSON Toolkit: JSON Toolkit 3.1: slight performance improvement (5% - 10%) new JsonException classPicturethrill: Version 2.3.28.0: Straightforward image selection. New clean UI look. Super stable. Simplified user experience.SQL Monitor - managing sql server performance: SQL Monitor 4.2 alpha 16: 1. finally fixed problem with logic fault checking for temporary table name... I really mean finally ...ScintillaNET: ScintillaNET 2.5: A slew of bug-fixes with a few new features sprinkled in. This release also upgrades the SciLexer and SciLexer64 DLLs to version 3.0.4. The official stuff: Issue # Title 32402 32402 27137 27137 31548 31548 30179 30179 24932 24932 29701 29701 31238 31238 26875 26875 30052 30052 Harness: Harness 2.0.2: change to .NET Framework Client Profile bug fix the download dialog auto answer. bug fix setFocus command. add "SendKeys" command. remove "closeAll" command. minor bugs fixed.BugNET Issue Tracker: BugNET 0.9.161: Below is a list of fixes in this release. Bug BGN-2092 - Link in Email "visit your profile" not functional BGN-2083 - Manager of bugnet can not edit project when it is not public BGN-2080 - clicking on a link in the project summary causes error (0.9.152.0) BGN-2070 - Missing Functionality On Feed.aspx BGN-2069 - Calendar View does not work BGN-2068 - Time tracking totals not ok BGN-2067 - Issues List Page Size Bug: Index was out of range. Must be non-negative and less than the si...YAF.NET (aka Yet Another Forum.NET): v1.9.6.1 RTW: v1.9.6.1 FINAL is .NET v4.0 ONLY v1.9.6.1 has: Performance Improvements .NET v4.0 improvements Improved FaceBook Integration KNOWN ISSUES WITH THIS RELEASE: ON INSTALL PLEASE DON'T CHECK "Upgrade BBCode Extensions...". More complete change list and discussion here: http://forum.yetanotherforum.net/yaf_postst14201_v1-9-6-1-RTW-Dated--3-26-2012.aspxNew Projects.NET Micro Framework - String Extensions: String Extension class library for .NET Micro Framework. This includes basic type conversion from 'byte' to 'string'.AGS: AGSAtlas Engine: Atlas is a game object-component engine using XNA 4 for Windows Phone 7.1. It is currently very early in it's development and is very much a work in progress.Cet Open Toolbox: Public repository for open sources projects brought to you by CET Electronics. Featuring .Net, .Net Micro Framework and several related technologies.ClassM: ClassM is an app that uses Metro Style for Windows 8. This application is intended to facilitate the management of classes taught by a teacher.CommandLineHelp: CommandLineHelp is a framework for simplifying the automated execution of command-line programs and saving their output.Conectayas: Conectayas is an open source "Connect Four" alike game but transformable to "Tic-Tac-Toe" and to a lot of similar games that uses mouse. Written in DHTML (JavaScript, CSS and HTML). Very configurable. This cross-platform and cross-browser game was tested under BeOS, Linux, *BSD, Windows and others.Crudo: CRUDO - The MCG (Model-Controller-Generator) CGF (Code Generation Framework) Visit The Project HomePage: http://adityayadav.com/CRUDO_The_MCG_Model_Controller_Generator_CGF_Code_Generation_Framework.aspx Licenses: 1) GPL v2 2) Commercial (contact us for information)Desafio Dot.Net: Projeto para o Desafio DotNetFurcadia Heimdall Tester: An application that helps Furcadia technicians test the integrity of the game server. It checks for availability of each heimdall, its connectivity to the rest of the system (horton/tribble) and how often it receives a user compared to the rest of them.GS1: D is a 2D game demo written in C++ and using an API : HAPI for the graphic part and the audio part. All the xml files are handled with tinyXML. It is a vertical scrolling shoot'em up where the player controls a dragon flying in Central Park.GS2: In Zombies, you are a wizard, the most powerful wizard in the world, and two days ago, the Devil forces began to attack our world. The only person capable of stopping them is you, this is why the Devil himself came to you and took your powers. You're now alone, without any weaponHeterogeneous Data Centre: The Heterogeneous Data Centre project supersedes the Materials Data Centre, a JISC-funded initiative to build an infrastructure for materials scientists and engineers to publish their experimental data online. The HDC can support data from any discipline, not just engineering.HJJM Adv. Database Project: Advanced database project for Hughes, Johnson, Johnson, and McShannon.Hundiyas: Hundiyas is an open source "Battleship" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses mouse. This cross-platform and cross-browser game was tested under BeOS, Linux, *BSD, Windows and others.IpSpy: IpSpy is a Windows Service Application that checks External IP address and if it changed, IpSpy sends Email with new IP to specified email addressMake calculator in asp.net: create calculator in asp.netMarTech SharePoint Sandboxed Solutions: Microsoft SharePoint 2010 is missing some key functionalities to make sure SharePoint is easy to use. My Sandbox Solutions adds these missing functionalities and makes it easier for consultants to implement the wanted functionalities. By using sandboxed solutions no farm solution has to be installed and every site can have it own solutions. Sandbox solutions gives flexibility to the site administrator without disturbing the farm administrator and security risks.MDS Administration: Master Data Services Administrator. Compare MDS models from the same or different serversmicrostockUploader: Uploads multiple JPEG images with additional files (RAW, EPS) to multiple microstocks. Supports FTP resume. Supports buggy routers which drop FTP connection after some timeout.Min-Mang: A logical game implementation.Multiverse OS: A Cosmos based O.S.N2F Yverdon Database Helper: A class to aid in performing simple database queries within N2F Yverdon. Also provides the capability to store queries for later use.N2F Yverdon Scryle Manager: This extension will provide a way to manage javascript and stylesheet files for inclusion in your templates. Compression, combination and minification are included.OPSM: OPSM Miner & information projectPatternPro Regular Expression Engine: PatternPro RXE is a Regular Expression Engine coded entirely in C# that has some features not offered in the MS implementation. The PatterProRXE project also contains a multi-state text scanner that makes it easy to create multi-state text scanners and parsers.PinBeiWang: PinBeiWangProgram Options: Parse command line optionsrealestateanalytics: Analytics for real estateRegistrationManagement: registration management of our company using asp.netSchool Project 12: SchoolProject12SelfService: Simple self service projectSMVector3: Vector3 class implemented as float array or with SIMD instructions with the same interface so it is transparant whether you decide to use one version or another. You can also change version during the life cycle of the projects.SVNTAGWC - Tag a SVN working copy: SVNTAGWC will help users and configuration managers tag builds of their projects. It will automatically freeze all external revisions and add all unversioned files to a specified copy (or tag).WeiboImage: a weibo image projectweizhi: sina weibo readerWindows Media Autorization: Windows Media Autorizaton PlugIn for windows media 9 WinRtBehaviors: A project for WinRT Attached behaviorswpfPostgres: Started...ZLib: by zapline 278998871@qq.com???????????: ???????? «???????????», ???????????? ? ?????? ?????????????? ??????????? ???????? ?? C#. ???????? ?? C#.

Search Results

Search found 13915 results on 557 pages for 'complete guide to irm'.

Page 337/557 | < Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344 | Next Page >

- by chaft

- by Hertfordian

- by dsaunier

- by adnymarc

- by Leo

- by user1786833

- by DrChase

- by pesar2

- by user1783560

- by minghua

- by Rick Strahl

- by bob.webster

- by shiju

- by John-Brown.Evans

- by John-Brown.Evans

- by Varun Chatterji

- by ScottGu

- by raul.goycoolea

- by ScottGu

- by psheriff

- by mseika

< Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344 | Next Page >