Search Results

Search found 24755 results on 991 pages for 'linux mom'.

Page 337/991 | < Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >

  • OpenVPN bad source address from client

    - by Bogdan
    I have one problem with OpenVPN. There are a lot drops records in the openvpn log file on the server: Mon Oct 22 10:14:41 2012 us=726541 laptop/???:1194 MULTI: bad source address from client [192.168.1.107], packet dropped grep -E "^[a-z]" server.conf ----- port 1194 proto udp dev tun ca data/ca.crt cert data/server.crt key data/server.key dh data/dh1024.pem tls-server tls-auth data/ta.key 0 remote-cert-tls client cipher AES-256-CBC tun-mtu 1200 server 10.10.10.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" client-to-client client-config-dir /etc/openvpn/ccd route 10.10.10.0 255.255.255.0 keepalive 10 120 comp-lzo persist-key persist-tun max-clients 5 status /var/log/status-openvpn.log log /var/log/openvpn.log verb 4 auth-user-pass-verify /etc/openvpn/verify.sh via-file tmp-dir /tmp script-security 2 ----- cat ccd/laptop ----- iroute 10.10.10.0 255.255.255.0 ----- cat client.conf ----- remote server ip 1194 client dev tun ping 10 comp-lzo proto udp tls-client tls-auth data/ta.key 1 pkcs12 data/vpn.laptop.p12 remote-cert-tls server #ns-cert-type server persist-key persist-tun cipher AES-256-CBC verb 3 pull auth-user-pass /home/user/.openvpn/users.db ----- According to "Jan Just Keijser - OpenVPN 2 Cookbook" root of the problem is incorrect config options.see the screenshot But, as you see, my config has such options. Could you please help me to solve this problem. @week Verb leverl=6; client log. Mon Oct 22 16:06:02 2012 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Mon Oct 22 16:06:02 2012 /sbin/ifconfig tun0 10.10.10.3 pointopoint 10.10.10.5 mtu 1500 Mon Oct 22 16:06:02 2012 /sbin/route add -net xxxx netmask 255.255.255.255 gw 192.168.1.1 Mon Oct 22 16:06:02 2012 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 10.10.10.5 Mon Oct 22 16:06:02 2012 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 10.10.10.5 Mon Oct 22 16:06:02 2012 Initialization Sequence Completed cat ccd/latop iroute 10.10.10.0 255.255.255.0 ifconfig-push 10.10.10.3 10.10.10.5

    Read the article

  • Can't figure out why hard drive is full [closed]

    - by Belgin Fish
    Possible Duplicate: How do I find out what is using up all the space on my / partition? No Free disk space so I have 2 hard drives in my server, one main one that is 10gb and then a separate one that is 2tb I'm storing all the files on the second one and the df -h output looks like this Filesystem Size Used Avail Use% Mounted on /dev/sda2 9.2G 8.8G 0 100% / tmpfs 1.5G 0 1.5G 0% /lib/init/rw udev 1.5G 148K 1.5G 1% /dev tmpfs 1.5G 0 1.5G 0% /dev/shm /dev/sda4 1.8T 747G 981G 44% /home /dev/sda4 1.8T 747G 981G 44% /usr/lib/cgi-bin I just can't figure out why the first one is full when all the files are being stored in the /usr/lib/cgi-bin I'm running debian I can't seem to find any files that would take up 8.8gb that arn't on the second hard drive :S Thanks!

    Read the article

  • Failed to su after making a chroot jail

    - by arepo21
    On a 64 bit CentOS host I am using script make_chroot_jail.sh to put a user in a jail, not permitting it to see anything expect it's home at /home/jail/home/user1. I did it typing this: sudo ./make_chroot_jail.sh user1 after, when trying to connect to user1 first i was getting an error like: /bin/su: user guest does not exist i have fixed this by copying some missed libraries: sudo cp /lib64/libnss_compat.so.2 /lib64/libnss_files.so.2 /lib64/libnss_dns.so.2 /lib64/libxcrypt.so.2 /home/jail/lib64/ sudo cp -r /lib64/security/ /home/jail/lib64/ But now, when trying to connect to user1 typing su user1 and then typing it's password, i am getting this error: could not open session So the question is how to connect to user1 in this situation? P.S. Here are the permissions of some files, this might be helpful in order to provide a solution: -rwsr-xr-x 1 root root /home/jail/bin/su drwxr-xr-x 4 root root /home/jail/etc -rw-r--r-- 1 root root /home/jail/etc/pam.d/su -rw-r--r-- 1 root root /home/jail/etc/passwd -rw------- 1 root root /home/jail/etc/shadow UPDATE1 After some modifications i managed to connect to user1, but the session closes immediately! I guess this a PAM issue, however cant find a way to fix it. Here the log entry for close action from /val/log/secure: Oct 6 15:19:42 localhost su: pam_unix(su:session): session closed for user user1 What makes the session to exit immediately after launching?

    Read the article

  • Rip authedicatation from LDAP to Local

    - by oxinabox
    We are taking a small portion of out network offline, and running a separate network using that portion. (By small portion I mean 2 servers, that will be connected to 30 odd boxs that aren't usually part of our network, and don't need to authenicate) I intend to create a VM on one of the servers to provide general user services, and IRC server, remote shell etc. And I would like the users to be able to use there usual server log in details. Problem is the LDAP server that normally checks those details is not one of the severs. So I need to be able to some how take their details off LDAP and put them on the the server that is coming. One suggestion I had was to set a LDAP server on the VM locally, and clone the LDAP database onto it (using something called slapcat) is this the best way? Or can I I change the LDAP data into local authentication data?

    Read the article

  • Anonymous user with proftpd on fedora

    - by stukerr
    Hi there, I am trying to setup an anonymous user account on our server to enable people to downlaod technical manuals for our products etc. and I would like this to be as secure as possible! I was just wondering if anyone knew a series of steps that will allow me to create an anonymous ftp account linked to a directory on the server that enables download only ? Also how could i make a corresponding ftp account with write priviledges to this account to allow people within our company to upload new files ? Sorry i'm a bit new to all this! Many Thanks, Stuart

    Read the article

  • Issues while installing no machine setup (NX )

    - by TopCoder
    I am trying to connect to NX server from windows client but it reports following exception NX 203 NXSSH running with pid: 5404 NX 285 Enabling check on switch command NX 285 Enabling skip of SSH config files NX 285 Setting the preferred NX options NX 200 Connected to address: 10.43.51.77 on port: 22 NX 202 Authenticating user: nx NX 208 Using auth method: publickey NX 204 Authentication failed. I have regenearted the default_dsa.key on server and imported the same for client but still not working. Any solutions?

    Read the article

  • How to keep variable preserve while running script through ssh

    - by Ali Raza
    I am trying to run while loop with read through ssh: #!/bin/bash ssh [email protected] "cat /var/log/syncer/rm_filesystem.log | while read path; do stat -c \"%Y %n\" "$path" >> /tmp/fs_10.10.10.10.log done" But the issue is my variable $path is resolving on my localhost where as I want to resolve it on remote host so that it can read file on remote host and take stat of all folder/files listed in "rm_filesystem.log"

    Read the article

  • file-name encoding problems

    - by tenhouse
    I googled over this topic but couldn't find what I was looking for... the following "happend" to me: I had my files stored on a NTFS-USB Harddisk, because of space problems I moved them to an ext3 system....somehow the filename (content is still ok as far as I saw) encoding screwed up....my files look like the following now: Kküken <--- should have an "ü" Jäger <--- should be an "ä" Zwölf <--- should be an "ö" fünfte <-- should be an "ü" etc .... These are just examples, but already give me my first question Why has the "ü" two different representations? (Maybe I screw up, before I screw up and now I have a mixing of x different encoding-layers? :) ) I tried the following command: convmv -r -f UTF-8 -t ISO-8859-1 * This command work for some files (for example Zwölf) but not for all: iso-8859-1 doesn't cover all needed characters for: "fünfte" So Iguess it must be another encoding - but which? How can I find out this? And is there any way that I can still fix all of this?

    Read the article

  • Cannot build digiKam

    - by Tichomir Mitkov
    I'm trying to compile digiKam 2.8.0. I have installed the required libraries but cMake seems to stuck without any meaningful reason. Here is the output of cMake: $ cmake -DCMAKE_BUILD_TYPE=relwithdebinfo -DCMAKE_INSTALL_PREFIX=/usr/local . -- Found Qt-Version 4.7.1 (using /usr/bin/qmake) -- Found X11: /usr/lib64/libX11.so -- Found KDE 4.6 include dir: /usr/include -- Found KDE 4.6 library dir: /usr/lib64 -- Found the KDE4 kconfig_compiler preprocessor: /usr/bin/kconfig_compiler -- Found automoc4: /usr/bin/automoc4 -- Local kdegraphics libraries will be compiled... YES -- Handbooks will be compiled..................... YES -- Extract translations files..................... NO -- Translations will be compiled.................. YES -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: libmediawiki ----------------------------------------------------------------------------- -- The following external packages were located on your system. -- This installation will have the extra features provided by these packages. ----------------------------------------------------------------------------- * QJSON - Qt library for handling JSON data ----------------------------------------------------------------------------- -- Congratulations! All external packages have been found. ----------------------------------------------------------------------------- -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: libkgeomap -- Found Qt-Version 4.7.1 (using /usr/bin/qmake) -- Found X11: /usr/lib64/libX11.so -- Check Kexiv2 library in local sub-folder... -- Found Kexiv2 library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkexiv2 -- kexiv2 found, the demo application will be compiled. -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: libkface -- Found Qt-Version 4.7.1 (using /usr/bin/qmake) -- Found X11: /usr/lib64/libX11.so -- First try at finding OpenCV... -- Great, found OpenCV on the first try. -- OpenCV Root directory is /usr/share/opencv -- External libface was not found, use internal version instead... -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: kipi-plugins -- Check Kexiv2 library in local sub-folder... -- Found Kexiv2 library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkexiv2 -- Check for Kdcraw library in local sub-folder... -- Found Kdcraw library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw CMake Error at extra/libkdcraw/cmake/modules/FindKdcraw.cmake:137 (file): file Internal CMake error when trying to open file: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw/libkdcraw/version.h for reading. Call Stack (most recent call first): extra/kipi-plugins/CMakeLists.txt:123 (FIND_PACKAGE) -- Check Kipi library in local sub-folder... -- Found Kipi library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkipi CMake Warning at extra/kipi-plugins/CMakeLists.txt:139 (MESSAGE): libkdcraw: Version information not found, your version is probably too old. -- Found GObject libraries: /usr/lib64/libgobject-2.0.so;/usr/lib64/libgmodule-2.0.so;/usr/lib64/libgthread-2.0.so;/usr/lib64/libglib-2.0.so -- Found GObject includes : /usr/include/glib-2.0/gobject -- Check for Ksane library in local sub-folder... -- Found Ksane library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libksane -- Check for KGeoMap library in local sub-folder... -- Found KGeoMap library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkgeomap -- Check Mediawiki library in local sub-folder... -- Found Mediawiki library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libmediawiki -- Check Vkontakte library in local sub-folder... -- Found Vkontakte library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkvkontakte -- Boost version: 1.38.0 -- libkgeomap: Found version 2.0.0 -- Found X11: /usr/lib64/libX11.so -- CMake version: cmake version 2.8.9 -- CMake version (cleaned): cmake version 2.8.9 -- -- ---------------------------------------------------------------------------------- -- kipi-plugins 2.8.0 dependencies results <http://www.digikam.org> -- -- libjpeg library found.................... YES -- libtiff library found.................... YES -- libpng library found..................... YES -- libkipi library found.................... YES -- libkexiv2 library found.................. YES -- libkdcraw library found.................. YES -- libxml2 library found.................... YES (optional) -- libxslt library found.................... YES (optional) -- libexpat library found................... YES (optional) -- native threads support library found..... YES (optional) -- libopengl library found.................. YES (optional) -- Qt4 OpenGL module found.................. YES -- libopencv library found.................. YES (optional) -- QJson library found...................... YES (optional) -- libgpod library found.................... YES (optional) -- Gdk library found........................ YES (optional) -- libkdepim library found.................. YES (optional) -- qca2 library found....................... YES (optional) -- libkgeomap library found................. YES (optional) -- libmediawiki library found............... YES (optional) -- libkvkontakte library found.............. YES (optional) -- boost library found...................... YES (optional) -- OpenMP library found..................... YES (optional) -- libX11 library found..................... YES (optional) -- libksane library found................... YES (optional) -- -- kipi-plugins will be compiled............ YES -- Shwup will be compiled................... YES (optional) -- YandexFotki will be compiled............. YES (optional) -- HtmlExport will be compiled.............. YES (optional) -- AdvancedSlideshow will be compiled....... YES (optional) -- ImageViewer will be compiled............. YES (optional) -- AcquireImages will be compiled........... YES (optional) -- DNGConverter will be compiled............ YES (optional) -- RemoveRedEyes will be compiled........... YES (optional) -- Debian Screenshots will be compiled...... YES (optional) -- Facebook will be compiled................ YES (optional) -- Imgur will be compiled................... YES (optional) -- VKontakte will be compiled............... YES (optional) -- IpodExport will be compiled.............. YES (optional) -- Calendar will be compiled................ YES (optional) -- GPSSync will be compiled................. YES (optional) -- Mediawiki will be compiled............... YES (optional) -- Panorama will be compiled................ YES (optional) -- ---------------------------------------------------------------------------------- -- -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: digiKam -- Check for Kdcraw library in local sub-folder... -- Found Kdcraw library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw CMake Error at extra/libkdcraw/cmake/modules/FindKdcraw.cmake:137 (file): file Internal CMake error when trying to open file: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw/libkdcraw/version.h for reading. Call Stack (most recent call first): core/CMakeLists.txt:156 (FIND_PACKAGE) -- Check Kexiv2 library in local sub-folder... -- Found Kexiv2 library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkexiv2 -- Check Kipi library in local sub-folder... -- Found Kipi library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkipi -- Check Kface library in local sub-folder... -- Found Kface library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkface -- Check for KGeoMap library in local sub-folder... -- Found KGeoMap library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkgeomap -- PGF_INCLUDE_DIRS = /usr/local/include/libpgf -- PGF_INCLUDEDIR = /usr/local/include/libpgf -- PGF_LIBRARIES = pgf -- PGF_LDFLAGS = -L/usr/local/lib;-lpgf -- PGF_CFLAGS = -I/usr/local/include/libpgf -- PGF_VERSION = 6.12.24 -- PGF_CODEC_VERSION_ID = 61224 -- Could NOT find any working clapack installation -- Boost version: 1.38.0 -- Check for LCMS1 availability... -- Found LCMS1: /usr/lib64/liblcms.so /usr/include -- Paralelized PGF codec disabled... -- Identified libjpeg version: 62 -- Found MySQL server executable at: /usr/sbin/mysqld -- Found MySQL install_db executable at: /usr/bin/mysql_install_db CMake Warning at core/CMakeLists.txt:310 (MESSAGE): libkdcraw: Version information not found, your version is probably too old. -- libkgeomap: Found version 2.0.0 -- Found gphoto2: -L/usr/lib64 -lgphoto2_port;-L/usr/lib64 -lgphoto2 -lgphoto2_port -lm -- WARNING: you are using the obsolete 'PKGCONFIG' macro, use FindPkgConfig -- WARNING: you are using the obsolete 'PKGCONFIG' macro, use FindPkgConfig -- PKGCONFIG() indicates that lqr-1 is not installed (install the package which contains lqr-1.pc if you want to support this feature) -- Could NOT find Lqr-1 (missing: LQR-1_INCLUDE_DIRS LQR-1_LIBRARIES) -- Found SharedDesktopOntologies: /usr/share/ontology -- Found SharedDesktopOntologies: /usr/share/ontology (found version "0.5.0", required is "0.2") -- -- ---------------------------------------------------------------------------------- -- digiKam 2.8.0 dependencies results <http://www.digikam.org> -- -- Qt4 SQL module found..................... YES -- MySQL Server found....................... YES -- MySQL install_db tool found.............. YES -- libtiff library found.................... YES -- libpng library found..................... YES -- libjasper library found.................. YES -- liblcms library found.................... YES -- Boost Graph library found................ YES -- libkipi library found.................... YES -- libkexiv2 library found.................. YES -- libkdcraw library found.................. YES -- libkface library found................... YES -- libkgeomap library found................. YES -- libpgf library found..................... YES (optional) -- libclapack library found................. NO (optional - internal version used instead) -- libgphoto2 and libusb libraries found.... YES (optional) -- libkdepimlibs library found.............. YES (optional) -- Nepomuk libraries found.................. YES (optional) -- libglib2 library found................... YES (optional) -- liblqr-1 library found................... NO (optional - internal version used instead) -- liblensfun library found................. YES (optional) -- Doxygen found............................ YES (optional) -- digiKam can be compiled.................. YES -- ---------------------------------------------------------------------------------- -- -- Adjusting compilation flags for GCC version ( 4.5.1 ) -- Configuring incomplete, errors occurred! Actually this line shows a sign of error CMake Error at extra/libkdcraw/cmake/modules/FindKdcraw.cmake:137 (file): file Internal CMake error when trying to open file: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw/libkdcraw/version.h for reading. 'version.h' doesn't exists instead there is a file 'version.h.cmake' I have installed libkdcraw (64-bit) from sources. I'm using OpenSuse

    Read the article

  • Virtual machines interconnection inside Proxmox 2.1 Cluster

    - by Anton
    We have 3 physical servers (each with 1 NIC) in different datacentres, all of them are interconnected by openvpn bridged private network (10.x.x.x). Inside this network we have fully functional 3 nodes Proxmox 2.1 cluster. So, actually question is: Is there any "proper" way to make "global" local network (172.16.x.x) for all VMs inside cluster, so even if we move VM from one node to other we could reach it by static IP regardless of it's physical location? BTW, we can't add dedicated NIC to each server. Thanks in advance. EDIT: I have tried to make a separate openvpn bridge for 172.16.x.x, now I have at each server two interfaces: SRV1: openvpnbr1 - 172.16.13.1 vmbr0 - 172.16.1.1 SRV2: openvpnbr1 - 172.16.13.2 vmbr0 - 172.16.2.1 But now there is no connection between those ifaces: SRV1: ping 172.16.13.2 From 172.16.1.1 icmp_seq=2 Destination Host Unreachable SRV2: ping 172.16.13.1 From 172.16.2.1 icmp_seq=2 Destination Host Unreachable If I shut down vmbr0 interfaces, so there is connection between servers over openvpn, but vmbr0 is used by Proxmox... Where I am wrong?

    Read the article

  • Log - Server kernel: INFO: task httpd:000000 blocked for more than 120 seconds

    - by valter
    Almost everyday my server is crashing due to hight server load, and even restarting apache or mysql can't solve the problem. I need to reboot the server to solve, or it crash again due to the high load. The log system records something like this when it crashes: Aug 11 18:33:53 server kernel: INFO: task httpd:20008 blocked for more than 120 seconds. Aug 11 18:33:53 server kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 11 18:33:53 server kernel: httpd D ffffffff801538ac 0 20008 5816 20066 19809 (NOTLB) Aug 11 18:33:53 server kernel: ffff81025a299dc8 0000000000000082 ffff81033b4c0740 ffffffff80009a14 Aug 11 18:33:53 server kernel: ffff8101063f8d80 0000000000000009 ffff8100b758f7e0 ffff8101c57187e0 Aug 11 18:33:53 server kernel: 00009436d4100b6c 000000000001d50f ffff8100b758f9c8 000000083b531588 Aug 11 18:33:53 server kernel: Call Trace: Aug 11 18:33:53 server kernel: [<ffffffff80009a14>] __link_path_walk+0x173/0xfb9 Aug 11 18:33:53 server kernel: [<ffffffff8002cc16>] mntput_no_expire+0x19/0x89 Aug 11 18:33:53 server kernel: [<ffffffff80063c4f>] __mutex_lock_slowpath+0x60/0x9b Aug 11 18:33:53 server kernel: [<ffffffff80023908>] __path_lookup_intent_open+0x56/0x97 Aug 11 18:33:53 server kernel: [<ffffffff80063c99>] .text.lock.mutex+0xf/0x14 Aug 11 18:33:53 server kernel: [<ffffffff8001b21f>] open_namei+0xea/0x712 Aug 11 18:33:54 server kernel: [<ffffffff8002768a>] do_filp_open+0x1c/0x38 Aug 11 18:33:54 server kernel: Firewall: *UDP_IN Blocked* IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:30:48:9e:6e:99:08:00 SRC=208.43.135.158 DST=255.255.255.255 LEN=151 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=38354 DPT=6112 LEN=131 Aug 11 18:33:54 server kernel: [<ffffffff8001a061>] do_sys_open+0x44/0xbe Aug 11 18:33:54 server kernel: [<ffffffff8005d28d>] tracesys+0xd5/0xe0 I googled a lot trying to find a solution. But it looks that the solution is just to update the kernel or disk driver, thinks that I don't know how to do. In this url http://bugs.centos.org/view.php?id=4515 a lot o people report similar problems, except the fact that they are not related to httpd like mine. According to one member, one solution would be to add "elevator=noop " to /etc/grub.conf like in this example: title CentOS (2.6.18-238.12.1.el5xen) root (hd0,0) kernel /vmlinuz-2.6.18-238.12.1.el5xen ro root=/dev/VolGroup00/LogVol00 elevator=noop initrd /initrd-2.6.18-238.12.1.el5xen.img Would this really solve the problem? My disk are working in RAID. Can this cause some problem to my server? Is there any other solution?

    Read the article

  • Virtualized Screen Resolution

    - by Jim R
    I have a 64 bit Ubuntu 9.10 workstation with two virtualized guest OSes using KVM/QEMU. Also both 64-bit. One is Fedora 12 the other is beta of Ubuntu 10.04. The problem is that I would like to use a larger size display that is configured by default. Both guest OSes have a maximum screen resolution of 1024x768. I would like to increase this to something like 1280x900 or 1440x900. The resolution of the host system is 1920x1080. This configuration appears to be a result of the installation detecting the resolution being reported by the virtual screen during installation. The only information I have found on the subject suggests modifying the xorg.conf file in the /etc/X11 directory. Neither guest system has this file. I tried creating one by hand in the Fedora system and managed to render it completely unusable. Not a big deal as this is recently installed and can be reinstalled easily. Is what I want to do possible? If so, how do I accomplish it?

    Read the article

  • Virtualized Screen Resolution

    - by Jim R
    I have a 64 bit Ubuntu 9.10 workstation with two virtualized guest OSes using KVM/QEMU. Also both 64-bit. One is Fedora 12 the other is beta of Ubuntu 10.04. The problem is that I would like to use a larger size display that is configured by default. Both guest OSes have a maximum screen resolution of 1024x768. I would like to increase this to something like 1280x900 or 1440x900. The resolution of the host system is 1920x1080. This configuration appears to be a result of the installation detecting the resolution being reported by the virtual screen during installation. The only information I have found on the subject suggests modifying the xorg.conf file in the /etc/X11 directory. Neither guest system has this file. I tried creating one by hand in the Fedora system and managed to render it completely unusable. Not a big deal as this is recently installed and can be reinstalled easily. Is what I want to do possible? If so, how do I accomplish it?

    Read the article

  • MySQL Memory usage

    - by Rob Stevenson-Leggett
    Our MySQL server seems to be using a lot of memory. I've tried looking for slow queries and queries with no index and have halved the peak CPU usage and Apache memory usage but the MySQL memory stays constantly at 2.2GB (~51% of available memory on the server). Here's the graph from Plesk. Running top in the SSH window shows the same figures. Does anyone have any ideas on why the memory usage is constant like this and not peaks and troughs with usage of the app? Here's the output of the MySQL Tuning Primer script: -- MYSQL PERFORMANCE TUNING PRIMER -- - By: Matthew Montgomery - MySQL Version 5.0.77-log x86_64 Uptime = 1 days 14 hrs 4 min 21 sec Avg. qps = 22 Total Questions = 3059456 Threads Connected = 13 Warning: Server has not been running for at least 48hrs. It may not be safe to use these recommendations To find out more information on how each of these runtime variables effects performance visit: http://dev.mysql.com/doc/refman/5.0/en/server-system-variables.html Visit http://www.mysql.com/products/enterprise/advisors.html for info about MySQL's Enterprise Monitoring and Advisory Service SLOW QUERIES The slow query log is enabled. Current long_query_time = 1 sec. You have 6 out of 3059477 that take longer than 1 sec. to complete Your long_query_time seems to be fine BINARY UPDATE LOG The binary update log is NOT enabled. You will not be able to do point in time recovery See http://dev.mysql.com/doc/refman/5.0/en/point-in-time-recovery.html WORKER THREADS Current thread_cache_size = 0 Current threads_cached = 0 Current threads_per_sec = 2 Historic threads_per_sec = 0 Threads created per/sec are overrunning threads cached You should raise thread_cache_size MAX CONNECTIONS Current max_connections = 100 Current threads_connected = 14 Historic max_used_connections = 20 The number of used connections is 20% of the configured maximum. Your max_connections variable seems to be fine. INNODB STATUS Current InnoDB index space = 6 M Current InnoDB data space = 18 M Current InnoDB buffer pool free = 0 % Current innodb_buffer_pool_size = 8 M Depending on how much space your innodb indexes take up it may be safe to increase this value to up to 2 / 3 of total system memory MEMORY USAGE Max Memory Ever Allocated : 2.07 G Configured Max Per-thread Buffers : 274 M Configured Max Global Buffers : 2.01 G Configured Max Memory Limit : 2.28 G Physical Memory : 3.84 G Max memory limit seem to be within acceptable norms KEY BUFFER Current MyISAM index space = 4 M Current key_buffer_size = 7 M Key cache miss rate is 1 : 40 Key buffer free ratio = 81 % Your key_buffer_size seems to be fine QUERY CACHE Query cache is supported but not enabled Perhaps you should set the query_cache_size SORT OPERATIONS Current sort_buffer_size = 2 M Current read_rnd_buffer_size = 256 K Sort buffer seems to be fine JOINS Current join_buffer_size = 132.00 K You have had 16 queries where a join could not use an index properly You should enable "log-queries-not-using-indexes" Then look for non indexed joins in the slow query log. If you are unable to optimize your queries you may want to increase your join_buffer_size to accommodate larger joins in one pass. Note! This script will still suggest raising the join_buffer_size when ANY joins not using indexes are found. OPEN FILES LIMIT Current open_files_limit = 1024 files The open_files_limit should typically be set to at least 2x-3x that of table_cache if you have heavy MyISAM usage. Your open_files_limit value seems to be fine TABLE CACHE Current table_cache value = 64 tables You have a total of 426 tables You have 64 open tables. Current table_cache hit rate is 1% , while 100% of your table cache is in use You should probably increase your table_cache TEMP TABLES Current max_heap_table_size = 16 M Current tmp_table_size = 32 M Of 15134 temp tables, 9% were created on disk Effective in-memory tmp_table_size is limited to max_heap_table_size. Created disk tmp tables ratio seems fine TABLE SCANS Current read_buffer_size = 128 K Current table scan ratio = 2915 : 1 read_buffer_size seems to be fine TABLE LOCKING Current Lock Wait ratio = 1 : 142213 Your table locking seems to be fine The app is a facebook game with about 50-100 concurrent users. Thanks, Rob

    Read the article

  • Passing PATH through sudo

    - by whitequark
    In short: how to make sudo not to flush PATH everytime? I have some websites deployed on my server (Debian testing) written with Ruby on Rails. I use Mongrel+Nginx to host them, but there is one problem that comes when I need to restart Mongrel (e.g. after making some changes). All sites are checked in VCS (git, but it is not important) and have owner and group set to my user, whereas Mongrel runs under the, huh, mongrel user that is severely restricted in it's rights. So Mongrel must be started under root (it can automatically change UID) or mongrel. To manage mongrel I use mongrel_cluster gem because it allows starting or stopping any amount of Mongrel servers with just one command. But it needs the directory /var/lib/gems/1.8/bin to be in PATH: this is not enough to start it with absolute path. Modifying PATH in root .bashrc changed nothing, tweaking sudo's env_reset and keepenv didn't either. So the question: how to add a directory to PATH or keep user's PATH in sudo?

    Read the article

  • I've set an editor as default, how do I call it to open files in a shell?

    - by iight
    EDIT I thought of a better way to phrase the question. How can I find the alias that Ubuntu is using for a different text editor? Rather than using nano by typing nano file.txt, i'd like to be able to type sublime file.txt to open sublime editor. I don't know where to look to find these aliases. sudo update-alternatives --config editor does not show it as a choice, I only see the 'default' editors, like Nano and vim.tiny.

    Read the article

  • bash : "set -e" and check if a user exists make script exit

    - by Dahmad Boutfounast
    i am writing a script to install a program with bash, i want to exit on error so i added "set -e" in the beginning of my script. the problem is that i have to check if a user exists inside of my script, to do this i am using "grep "^${USER}:" /etc/passwd", if the user exists, the script runs normally, but if the user doesn't exist, this command exists, and i don't want to exit on this case (i have to create the user and continue my installation). so what's the solution to make my script continue running ?? i tried to redirect the output of "grep" to a variable, but i still have the same problem :( thanks.

    Read the article

  • Server load high, CPU idle. NFS the cause?

    - by Mech Software
    I am running into a scenario where I'm seeing a high server load (sometimes upwards of 20 or 30) and a very low CPU usage (98% idle). I'm wondering if these wait states are coming as part of an NFS filesystem connection. Here is what I see in VMStat procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 2 1 0 1298784 0 0 0 0 16 5 0 9 1 1 97 2 0 0 1 0 1308016 0 0 0 0 0 0 0 3882 4 3 80 13 0 0 1 0 1307960 0 0 0 0 120 0 0 2960 0 0 88 12 0 0 1 0 1295868 0 0 0 0 4 0 0 4235 1 2 84 13 0 6 0 0 1292740 0 0 0 0 0 0 0 5003 1 1 98 0 0 4 0 0 1300860 0 0 0 0 0 120 0 11194 4 3 93 0 0 4 1 0 1304576 0 0 0 0 240 0 0 11259 4 3 88 6 0 3 1 0 1298952 0 0 0 0 0 0 0 9268 7 5 70 19 0 3 1 0 1303740 0 0 0 0 88 8 0 8088 4 3 81 13 0 5 0 0 1304052 0 0 0 0 0 0 0 6348 4 4 93 0 0 0 0 0 1307952 0 0 0 0 0 0 0 7366 5 4 91 0 0 0 0 0 1307744 0 0 0 0 0 0 0 3201 0 0 100 0 0 4 0 0 1294644 0 0 0 0 0 0 0 5514 1 2 97 0 0 3 0 0 1301272 0 0 0 0 0 0 0 11508 4 3 93 0 0 3 0 0 1307788 0 0 0 0 0 0 0 11822 5 3 92 0 0 From what I can tell when the IO goes up the waits go up. Could NFS be the cause here or should I be worried about something else? This is a VPS box on a fiber channel SAN. I'd think the bottleneck wouldn't be the SAN. Comments?

    Read the article

  • "eject" command not working..

    - by shadyabhi
    shadyabhi@shadyabhi-desktop:~$ eject -v eject: using default device `cdrom' eject: device name is `cdrom' eject: expanded name is `/media/cdrom' eject: `/media/cdrom' is a link to `/media/cdrom0' eject: `/media/cdrom0' is not mounted eject: `/media/cdrom0' is not a mount point eject: tried to use `/media/cdrom0' as device name but it is no block device eject: unable to find or open device for: `cdrom' shadyabhi@shadyabhi-desktop:~$ The tray doesnt open.. How do I open tray using command line?

    Read the article

  • Porting GNOME keyboard shortcuts to URXVT

    - by fpga_boffin
    I recently switched from gnome terminal to urxvt (and installed tabbed extensions). I am also a heavy emacs user which uses a lot of key combinations similar to urxvt (tab related stuff) like Shift-Left and Shift-Right. These key-combinations are set for selecting text in emacs. Is there a way to map ALT-1, ALT-2, ALT-3 for tabs 1, 2, 3 ..? Is there an extension to do that ? Can it be achieved through the ~/.Xdefaults file ?

    Read the article

  • Mod_security questions and on User-Agent types

    - by Tiffany Walker
    Very new to mod_sec I want to block a UA string and I noticed there are a few types: SecRule HTTP_User-Agent SecRule REQUEST_HEADERS:User-Agent What is the real difference between them? My block: SecRule REQUEST_HEADERS:User-Agent "perl" "phase:2,pass,msg:'Perl based user agent identified'" Do I need to set a SecDefaultAction phase:2,deny,status:403,log,auditlog before that? Then any SecRule below that follows that action right?

    Read the article

  • Debugging "clogged" TCP connections

    - by Nikratio
    I'm having trouble with an internet connection that seems to randomly "freeze" arbitrary tcp connections. The connections stay established, but no data is coming through. When this happens, netstat still shows the connection status as ESTABLISHED on both the local computer: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name Timer tcp 0 53 192.168.0.10:41129 173.255.235.238:143 ESTABLISHED 8219/gnutls-cli on (79.31/13/0) ..and the remote server: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name Timer tcp 0 0 173.255.235.238:143 68.5.174.98:41129 ESTABLISHED 5303/imapd off (0.00/0/0) However, it seems that no data at all is transferred. If I run strace on the local and remote process, both just show a repeating sequence of select calls (with different fds of course), e.g. select(6, [0 5], NULL, NULL, {0, 50000}) = 0 (Timeout) select(6, [0 5], NULL, NULL, {0, 50000}) = 0 (Timeout) select(6, [0 5], NULL, NULL, {0, 50000}) = 0 (Timeout) The internet connection overall does not seem affected, I can still establish new connections to the same service on the same server without any problems. However, the affected local applications seem to be unaware of the problem and just hang. When I look at a packet capture of this connection on the client side, the last thing that happens is that the client transmits some data, then nothing happens for about 1100 seconds, and then several TCP Retransmission requests go out, with intervals increasing from 4 seconds to 130 seconds. No activity is captured after that. After about 10 minutes, the connection on the remote end disappears from the netstat (I wasn't able to catch any intermediate state), but still stays ESTABLISHED on the local end. Finally, after some more minutes, the local application aborts with a timeout and disappears from the local netstat output as well. Does anyone have a suggestion of how I could debug this further to find out where the problem lies and how to fix it? Additionaly and/or as a temporary workaround: is is there some way to globally reduce the timeout on client and/or server to reduce the time before the local application aborts?

    Read the article

< Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >