Search Results

Search found 95133 results on 3806 pages for 'switch user'.

Page 337/3806 | < Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >

  • Speakers will not work after I use USB Headset

    - by Josh K
    I am trying to configure my SteelSeries Siberia V2 Frost USB Headset to work with my 2.0 speakers using a jack. My goal is to find a easy way (no restart) to switch playback from my headset and my speakers and vice-versa. If i plug my headset in and make it the default device then restart my application/web page then the sounds works out of headset. If I switch the default to my speakers and restart apps/web pages then sound does not play. I know my speakers are on because if I configure them through windows and test, the sounds play, and sounds also play when I test it through my audio manager. Even if I unplug my headset, I still cannot get sound out of my speakers unless I restart My audio manager is RealTek HD Audio Manager, Windows 7 x64. I have tried the speaker back, usb front. speaker front, usb in front port. I have not tried speaker back, usb back.

    Read the article

  • Laptop changes closing lid power options based on media/music playing

    - by Backdraft
    Hi, This is on a Lenovo X60 running Windows 7 Professional. This is just a pet peeve of mine, but I was wondering if it were somehow possible to have my laptop autodetect whether any media/music is playing on and change/switch the "Close lid" options under Power Options, ie. when something is playing change state to "Do Nothing" otherwise change state to "Sleep". I guess I can probably set a some key combo up with AutoHotKey to do it, but was hoping Windows could detect and switch my Power Options automatically. Thanks.

    Read the article

  • Switching to some emacs shell buffers moves the cursor to the beginning of the buffer

    - by yuvilio
    I run Emacs 24 with prelude and a few shells that i invoke at the start ( e.g.: (shell "*shell*_spare") ). When i switch to some of them (C-x b), my cursor lands at the beginning of the buffer, rather than when it last left off (typically the end of the buffer after the last command I ran). The strange thing is that this does not happen for all the shell buffers that I set up in the same way but with different names. When I switch to them, the cursor is where it last left off. Any ideas how I can make the cursor always be where it last was or at the bottom?

    Read the article

  • Bridging two sockets

    - by Itehnological
    I wondered if it is possible to bridge two incoming tcp sockets. For example: Client A -----> Server <----- Client B The the server sends it's magic to both clients and then they connect to each other bypassing the server Server Client A ----------><---------- Client B UPDATE: The idea is when those clients can't bind to ports to listen to still be able to create connection between each other with the help of the server. For example Client A and Client B have tcp sockets with the server. User A decides to chat with User B and creates a new tcp connection with the server with the request to bridge it with User B. The server sends that request to Client B and it also opens up a new tcp connection with the server for that chat line. Now when the server has both chat connections from A and B it bridges them and they can work without the server, and as a result the server won't have to process all the messages and files the two users share. That's the idea/

    Read the article

  • Windows XP - Repairing Corrupt System32\Config\System File

    - by SimonTewsi
    My apologies for this long post. I would like to describe the mess I'm in then ask some questions about how to fix it: Starting up my Windows XP SP1 machine I got the following message: Windows could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM Tried restarting several times with same results then Googled the problem. Tried the fix described here: http://icrontic.com/articles/repair%5Fwindows%5Fxp (since my CPU does not have XD buffer overflow protection I did not set /NOEXECUTE=OPTIN as OS Load Option). This did not work. I then found another fix for the problem on hardwareanalysis.com: Basically, boot to dos prompt (or recovery console if available) and make backups of the following files:- c:\windows\system32\config\system (to c:\windows\tmp\system.bak) c:\windows\system32\config\software (to c:\windows\tmp\software.bak) c:\windows\system32\config\sam (to c:\windows\tmp\sam.bak) c:\windows\system32\config\security (to c:\windows\tmp\security.bak) c:\windows\system32\config\default (to c:\windows\tmp\default.bak) then delete the above files (not the backups!) then copy the above files in c:\windows\repair to the c:\windows\system32\config directory restart your computer This did work (and I wish I'd done it first, since it was completely reversible, unlike the first method). However, afterwards I found that all the user accounts on the PC were gone. I resurrected them by copying the backed up security file back into the system32\config folder (I may have copied the SAM file from backup as well, I cannot remember clearly now). Now the PC boots up and I can log in. However things are still not right. I tried to alter one of the user accounts and found I could not access the User Accounts in the Control Panel. Microsoft KB 919292 had a fix for the problem. However, the fix failed with a Windows Installer error: The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if Windows Installer is not correctly installed. Contact your support personnel for assistance. Windows Installer 3.1 was already installed. I reinstalled it but continued to get the Windows Installer error whenever I tried to run the fix in KB 919292. I have since noticed another three problems: 1) Several applications on the PC no longer run, eg Microsoft Word. Shortcuts no longer seem to do anything and if I run the executables directly (eg for Word by running C:\Program Files\Microsoft Office\Office10\Winword.exe) I get a message similar to: "Microsoft Word has not been installed for the current user. Please run setup to install the application." even though the executable is clearly visible in Windows Explorer (and even though Word actually opens - the error dialog appears after Word has opened. Clicking OK to the error dialog closes Word). 2) One or the other of the two fixes I tried for the original problem caused new user profiles to be created. eg My old user profile under the Documents and Settings folder was Simon. The old one still exists but there is now a new one called Simon.DBQ2515. Obviously the new one is being used because Opera (my browser that still works) no longer sees the bookmarks file under my old profile. 3) Probably as a result of fooling around with the Security file, when I try to boot off the Windows XP CD and run the Recovery Console I am now asked for the administrator password. The only problem is there is no administrator account on the PC. There is one account, LocalAdmin, that has administrative rights but when I entered the password for that account it did not work. It is so long since I originally set up the PC that I cannot remember if the original administrator account ever had a password and, if so, what it was. So, my question is: How can I fix this mess? In particular: 1) Having tried the two fixes linked to above, have I irrepairably damaged the Windows instance, requiring a clean reinstallation of Windows + all applications, or should it be possible to get the machine working correctly again without such drastic measures? 2) Is there any way to get around the administrator password so I can use the Recovery Console again, given that there is no account called "administrator" and the password for the one account with admin privileges does not work (and that, before I started the second fix, I was not asked for an administrator password)? 3) Is there any easy way to fix the problem with the applications that think they are not installed? 4) Is there any easy way to fix the problem of the Windows Installer that does not work, even if reinstalled? Cheers Simon

    Read the article

  • Mercurial says hgrc is untrusted in Emacs, but works fine from the command line

    - by Ken
    I've got some Mercurial checkouts in a directory that was mounted by root. Mercurial is usually suspicious of files that aren't mine, but I'm the only user here, so I put: [trusted] users = root groups = root in my ~/.hgrc, and now I can use hg from the command line with no warnings or errors about anything being untrusted. So far, great. But when I try to run, say, vc-annotate in Emacs, I get an Annotate buffer that says: abort: unknown revision 'Not trusting file /home/me/.../working-copy/.hg/hgrc from untrusted user root, group root Not trusting file /home/me/.../working-copy/.hg/hgrc from untrusted user root, group root 7648'! The message area says: Running hg annotate -d -n --follow -r... my-file.c...FAILED (status 255) I don't have anything in my .emacs related to vc or hg. Other commands, like vc-diff, work fine. What am I missing here?

    Read the article

  • Does the upload file INPUT HTML element give any personal information away?

    - by Senseful
    I'm wondering what personal information the file input (<input type="file">) element gives the website. I noticed that it does show the file name and the website does seem to have access to it. What about the file's path? If the file is located in My Documents, they could find out the user name via the path (e.g. C:\Documents and Settings\Bob\My Documents) which many times is the actual user's name that is using the website. What information do most modern browsers allow the website to access when a user uses the file input element? Could JavaScript somehow be used to gain more information? What about when plugins (such as Flash or Java) implement file uploading?

    Read the article

  • Ubuntu SSH issue

    - by palani
    0 Hi, I have the ubntun machine... under my /home/user/.ssh i have my id_rsa.pub key... i carefully copied that key and paste my key to respository Git account. After that i try to connect from locat system to my git respository i got the following error warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.). . I removed SSH in system and re-enable and did agin.. but no luck.... I have no idea what's happening with my SSH key ....can any one please tell me on this... Note : i noticed in my home /home/user/.ssh && /home/user/.ssh2

    Read the article

  • Ubuntu SSH issue

    - by palani
    Hi, I have the ubntun machine... under my /home/user/.ssh i have my id_rsa.pub key... i carefully copied that key and paste my key to respository Git account. After that i try to connect from locat system to my git respository i got the following error warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.). . I removed SSH in system and re-enable and did agin.. but no luck.... I have no idea what's happening with my SSH key ....can any one please tell me on this... Note : i noticed in my home /home/user/.ssh && /home/user/.ssh2

    Read the article

  • Virtualbox fullscreen mode problem

    - by AtharvaI
    hi all I have a slightly weird issue with virtualbox. My host OS is Win7 (64-bit) and guest OS is Ubuntu 10.10(64-bit). When I switch to fullscreen mode in virtualbox, ubuntu display resizes to fit my screen size. however, after that the display is not updated. So if i click a menu or something I don't see it appear. but it seems to work in the background. if i click a menu in fullscreen mode, i don't see anything happen, but if then switch to windowed mode I see the menu already open. I have installed virtuabox guest additions. if any has a similar issue or has found a solution please let me know thanks.

    Read the article

  • How should I troubleshoot a problematic wireless connection on Linux?

    - by Gearoid Murphy
    I recently purchased a netgear 150 usb wireless dongle for use with my 11.10 Xubuntu amd64 system. Using the network-manager interface, I can see local wireless networks and enter the authentication details for my local wireless lan. Unfortunately, the connection does not seem to work, I keep getting notifications that my wireless has disconnected (but none indicating that I've connected). When I examine syslog, it seems to indicate that I've successfully associated with the wireless switch and that dhcp has successfully acquired an ip address but the log shows that the dhcp process keeps sending requests, eventually dropping the connection. 'ifconfig wlan0' never shows the dhcp address logged in syslog. I suspect that the problem lies with the usb dongle, my configuration or the wireless switch but I am not certain how to isolate the problem, can anyone provide some insight on how I should go about homing in on the cause of this problem or verifying the functionality of the individual components, thanks.

    Read the article

  • Web Server Users - Best Practice

    - by Toby
    I was wondering what is considered best practice when several developers/administrators require access to the same web server. Should there be one non-root user with a secure username and password unqiue to the web server which everyone logs in as or should there be a username for each person. I am leaning towards a username for each person to aid in logging etc however then does the same user keep the same credentials over several servers, or should at least their password change depending on the server they are on? Should any non-root user of the system be added to the sudoers file or is it best practice to leave everyone off it and only let root perform certain tasks? Any help would be greatly appreciated.

    Read the article

  • 10 System LAN latency with ADSL modem as gateway

    - by itsoft3g
    Recently I expanded LAN in my office from 3 to 10 computers. Structure star topology, one ADSL Modem connected to One Switch which is again connected to 10 computers. Also we have Wifi device Netgear which is connected from switch. ADSL Modem acts as the DHCP Server, all the system will have default gateway IP (ADSL Modem's IP) Network latency is now become very high, All the chat severs disconnect often like google talk, skype etc, also internet become very very slow. when all the computer turned on. We have 4 Mbps Download and 100 Kbps upload Net speed. Its look like ADSL Modem cannot able to handle all the connections. I tried to setup a system as default gateway which will connect to modem, not sure how to do this. Please advice on this.

    Read the article

  • WinXP on VPC - Unable to change the way users log on or off

    - by kamleshrao
    On my Win7 computer, I have setup a new Win-XP VPC. In the VPC window, when I click Ctrl+Alt+Del, it shows me Windows Task Manager. As per MS KB [ http://support.microsoft.com/kb/281980 ], we can change this behavior to show the regular Windows Security window. But while making this change, I am getting the following error: User Accounts Fast User Switching cannot be turned off from a remote connection to this computer. Log on to the computer locally to turn off Fast User Switching. OK Is there any way I can fix this setting?

    Read the article

  • Psexec issue when running an application on a Windows Server 2008 R2 machine from a 2003 R2 machine

    - by Vermin
    I am trying to run an application on a Windows Server 2008 R2 machine from a Windows Server 2003 R2 machine using a batch file with the following line of code in a batch file: psexec \\nightmachine -u DOMAIN\User -p Password -i "C:\FilePath\Application.exe" argument1 argument2 The application fails to run correctly when started using psexec, but the application will run correctly if I have logged into the nightmachine with the same user and started it from its file path via cmd. I have been able to get hold of the error returned in the application from its log and the exception returned is the following: System.DllNotFoundException: Unable to load DLL 'rasapi32.dll': A dynamic link library (DLL) initialization routine failed. (Exception from HRESULT: 0x8007045A) After searching for that error code on the net, there are a lot of posts saying that this is caused by file corruption, but I cant see why that would be the case as the application will run normally when not being run from psexec. (the user is an administrator on both machines) Can anyone please help me on this? If any more information is needed to help solve this issue then please ask and I will do my best to post it.

    Read the article

  • How to have 2 windows machines on the same network with the same IP address

    - by Stu
    I have a custom made ADC device that is spitting out data by addressed UDP packets. I have that device plugged into a 4 port switch. I have one windows embedded standard 7 machine which is the normal recipient of that data. To be able to receive the data (Using LabVIEW) the windows network adapter IPv4 settings must have a static IP address that corresponds to the UDP packet destination. I would like to add a second windows machine (This one is just regular Win 7 Pro) to simultaneously catch the data, however with all devices connected to the switch, the Win 7 Pro machine recognizes an IP address conflict and will not take the setting for the required static IP address. (The network adaptor settings show that the correct value has been entered but ipconfig shows that it is not actually set.) Neither windows machine needs to transmit network data, they only need to be able to receive the UDP data from the ADC device. Is there any way to disable this IP address conflict detection 'feature' of windows networking?

    Read the article

  • How do I start control panel with runas in Windows XP?

    - by MrVimes
    Sometimes I need to make a config change on another user's PC. The user doesn't have admin rights so I try to start control panel using the runas command. I can start other stuff with the command but if I try to start control panel nothing happens. It doesn't even give me an error message. Alternatively I start another command prompt as admin (using the runas command again) and from that try to start control panel. Still no joy. Is control panel designed not to be startable from a non-admin profile as an admin user?

    Read the article

  • Bios wont post unless I restart power supply.

    - by remy
    I have an annoying problem with a computer. The BIOS wont post after it has been turned off and started again unless I turn the switch off/on on the power supply. The fans, cdrom hdd and everything starts running but the bios never beeps and the monitor stays black. I HAVE TRIED: reinstalling windows xp, flashed bios to latest, cmos clear, new power supply, other hdd, new memory sticks, graphics card. I also removed the motherboard from the computer case and laid it on a cardboard box and only connected the PSU, RAM and CPU. Other than this the computer works great but its annoying having to off/on the power supply switch before turning it on after its been off. My guess is that the motherboard is faulty but I would just like to hear what you guys think. Sorry for my english / Remy

    Read the article

  • Poor quality when trying to stream a 720p video to XBox 360 using Media Center Extender

    - by MBraedley
    I have my XBox 360 set up as a Media Center Extender for my Windows 7 desktop. SD quality avi videos stream fine to my XBox, either though the video library or through Media Center Extender, but when I try a 720p mkv file, the frame rate plummets and the A/V sync is completely lost. I don't want to transcode or switch container formats (mkv isn't supported by the 360), but still want to stream. Both my desktop and 360 are plugged into the same gigabit switch, which is plugged into my ISP supplied modem/router. The video plays fine on my machine in a number of programs. Considering that I should have more than enough bandwidth to accommodate this video, why won't it play back properly?

    Read the article

  • SSH authentification with public key fails

    - by palani
    I have my id_rsa.pub key under my /home/user/.ssh. I carefully copied that key and paste my key to respository Git account. While trying to connect from my local system to my git respository, I got the following error: warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.) I removed SSH in system and re-enable and did again, but no luck. I have no idea what's happening with my SSH key. Can any one please tell me on this? Note : I noticed in my home /home/user/.ssh && /home/user/.ssh2

    Read the article

  • Is it possible to use multi keyboards with multi keyboard layouts simultaneously?

    - by mono
    Considering to switch to dvorak layout, but this terminal is used by multi users as the same user account. It is unacceptable to ask all people to switch layout, plus it is hard to use dvorak layout with a keyboard qwerty-ly labeled. But there are spare (USB,qwerty) keyboards, so if I plug another keyboard in and be able to use multi layouts on different psyical keyboard simultaneously (I will rearrange letters on keys), the problem get solved. solution for either windows or linux is fine. anyway thanks all.

    Read the article

  • Microsoft CALs for Domain Controller

    - by Damo
    I am designing a network and I've come to the point of specifying out the number of CALs required for this network. Microsoft licensing has always confused me, it's just not always clear to me. I plan to have 1 2008 std domain controller, another 2008 server (not a domain controller) and 200 Windows 7 devices connected to the domain for domain services. The 200 W7 devices will all authenticate to the domain controller with the same domain account. (this is a special type of network, not a user workstation network) Therefore, do I need to purchase 200 CALS for the 200 devices, or can I purchase say 10 CALS (user CALS) as the amount of unique user accounts is very low. Many thanks for looking.

    Read the article

  • Find and raise a window in KDE4 with shortcut

    - by Andre_112
    Hi all! I was wondering about a possibility to find and raise some window in KDE4 with shortcut. Currently in KDE 4.4 there is a possibility to switch to window from krunner (Alt-F2). Say, I have an open konsole widow somewhere and to switch to it, I can Alt-F2, write konsole and choose konsole window I need from the list. This is great, but too much typing. I would like to have a keyboard shortcut to do the same. Maybe some DBUS magic can do that? Any ideas? Thaks! Andre

    Read the article

  • Differences between Cherry mechanical keyboard switches?

    - by TreyK
    I want a comfortable, responsive mechanical switch keyboard. My only concern about mechanical switch keyboards is the noise. Boards based off of the Cherry MX Blue seem to be the loudest, but apparently offer increased tactility. I don't mind a clicky noise (I would actually prefer a bit of noise), I just don't want anything overpowering. What are the different types of Cherry mechanical switches are out there, and what separates one from the other? Also, where would I be able to test one out?

    Read the article

< Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >