Search Results

Search found 11601 results on 465 pages for 'bulk action'.

Page 338/465 | < Previous Page | 334 335 336 337 338 339 340 341 342 343 344 345  | Next Page >

• Event-Driven Debugging

  - by Brian Donahue

  Most application troubleshooting involves getting an error, analyzing the error message, and at worst, attaching a debugger to work out the real cause. What is not really covered is how to troubleshoot an applicaiton that is not errant, but is having a performance issue, and more than likely, in the middle of the night when you are snug in your bed, sawing logs. What you need is an ever-vigilant cyborg who never sleeps to sit in front of your server all night, but as SkyNet is not live yet, you can settle for the next-best thing. Windows provides performance counters and alerts that can tell you when an applicaiton reaches an unacceptable threshold of naughty behavior, but although it can tattle on your brainchild, it won't be the child psychiatrist that you need to tell you why he's pulling your server's pigtails and pulling faces at the teacher. What you need is to plug a debugger into performance monitor and have it tell you what's going on with your applicaiton at the time. For this purpose, I'd used Microsoft's MDbgEngine as the basis for an applicaiton that will dump a program's stacks, I call it Application Slicer Dicer Wonder Dumper Super Cyborg, or StackOMatic for short. StackOMatic can look at a program's behavior and tell you if the stacks are not moving, but it can also work on the command-line to dump all managed methods on the stack at will. Now that there is a command you can use to dump the stacks, all you need to do is politely tell Windows to run it when you're displeased with your creation as it's trashing the CPU of your server at 3 AM. The first step is to create a scheduled task to tell StackOMatic to dump your applicaiton. Start Task Scheduler and right-click Task Scheduler Library and then Create Task. For this exercise I'm creating a task that will dump the Red Gate SQL Monitor Base Monitor Service. In the Actions tab, I enter the path to StackOMatic and use the arguments to log the stack dump to a file: /PN:RedGate.Response.Engine.Alerting.Base.Service /OUT:c:\users\administrator\MonitorLog.txt Next, I go into Windows Server 2008's Reliability and Performance Monitor and add a new Data Collector Set. This set will produce an alert on the %Processor Time for the service. When the processor time breaches 50%, it will run the StackDumpBaseService task I created. Whenever the service misbehaves, it will append to the log file. Now when I go to work in the morning, I can see what the service was doing when it overloaded the processor and take action.

  Read the article

• What is the right way to group this project into classes?

  - by sigil

  I originally asked this on SO, where it was closed and recommended that I ask it here instead. I'm trying to figure out how to group all the functions necessary for my project into classes. The goal of the project is to execute the following process: Get the user's FTP credentials (username & password). Check to make sure the credentials establish a valid connection to the FTP server. Query several Sharepoint lists and join the results of those queries to create a list of items that need to have action taken on them. Each item in the list has a folder. For each item: Zip the contents of the folder. Upload the folder to the FTP server using SFTP Update the item's Sharepoint data. Email the user an Excel report showing, e.g., Items without folder paths Items that failed to zip or upload Steps 2-5 are performed on a periodic basis; if step 2 returns an invalid connection, the user is alerted and the process returns to step 1. If at any point the user presses a certain key, the process terminates. I've defined the following set of classes, each of which is in its own .cs file: SFTP: file transfer processes DataHandler: Sharepoint data retrieval/querying/updating processes. Also makes and uploads the zip files. Exceptions: Not just one class, this is the .cs file where I have all of my exception classes. Report: Builds and sends the report. Program: The main class for running the program. I recognize that the DataHandler class is a god object, but I don't have a good idea of how to refactor it. I feel like it should be more fine-grained than just breaking it into Sharepoint, Zip, and Upload, but maybe that's it. Also, I haven't yet worked out how to combine the periodic behavior with the "wait for user input at any point in the process" part; I think that involves threads, which means other classes to manage the threads... I'm not that well-versed in design patterns, but is there one that fits this project well? If this is too big of a topic to neatly explain in an SO answer, I'll also accept a link to a good tutorial on what I'm trying to do here.

  Read the article

• ant ftp doesn't download files in subdirectories

  - by Kristof Neirynck

  Hello, I'm trying to download files in subdirectories from an ftp server with ant. The exact set of files is known. Some of them are in subdirectories. Ant only seems to download the ones in the root directory. It does work if I download all files without listing them. The first ftp action should do the exact same thing as the second. Instead it complains about "Hidden files" and seems to prefix the paths with "\\". Does anyone know what's wrong here? Is this a bug in commons-net? build.xml <?xml version="1.0" encoding="utf-8"?> <project name="example" default="example" basedir="."> <taskdef name="ftp" classname="org.apache.tools.ant.taskdefs.optional.net.FTP" /> <target name="example"> <!-- 2 files retrieved --> <ftp action="get" verbose="true" server="localhost" userid="example" password="example"> <fileset dir="downloads" casesensitive="false" includes="root1.txt,root2.txt,a/a.txt,a/b/ab.txt,c/c.txt" /> </ftp> <!-- 5 files retrieved --> <ftp action="get" verbose="true" server="localhost" userid="example" password="example"> <fileset dir="downloads" casesensitive="false" includes="**/*" /> </ftp> </target> </project> run_ant.bat @ECHO OFF PUSHD %~dp0 SET CLASSPATH= SET ANT_HOME=C:\apache-ant-1.8.0 SET ant=%ANT_HOME%\bin\ant.bat SET antoptions=-nouserlib -noclasspath -d SET ftpjars=^ -lib lib\jakarta-oro-2.0.8.jar ^ -lib lib\commons-net-2.0.jar CALL %ant% %antoptions% %ftpjars% > output.txt POPD output.txt Unable to locate tools.jar. Expected to find it in C:\PROGRA~1\Java\jre6\lib\tools.jar Apache Ant version 1.8.0 compiled on February 1 2010 Trying the default build file: build.xml Buildfile: G:\ftp\build.xml Adding reference: ant.PropertyHelper Detected Java version: 1.6 in: C:\PROGRA~1\Java\jre6 Detected OS: Windows 7 Adding reference: ant.ComponentHelper Setting ro project property: ant.file -> G:\ftp\build.xml Setting ro project property: ant.file.type -> file Adding reference: ant.projectHelper Adding reference: ant.parsing.context Adding reference: ant.targets parsing buildfile G:\ftp\build.xml with URI = file:/G:/ftp/build.xml Setting ro project property: ant.project.name -> example Adding reference: example Setting ro project property: ant.project.default-target -> example Setting ro project property: ant.file.example -> G:\ftp\build.xml Setting ro project property: ant.file.type.example -> file Project base dir set to: G:\ftp +Target: +Target: example Adding reference: ant.LocalProperties parsing buildfile jar:file:/C:/apache-ant-1.8.0/lib/ant.jar!/org/apache/tools/ant/antlib.xml with URI = jar:file:/C:/apache-ant-1.8.0/lib/ant.jar!/org/apache/tools/ant/antlib.xml from a zip file Class org.apache.tools.ant.taskdefs.optional.net.FTP loaded from parent loader (parentFirst) Setting ro project property: ant.project.invoked-targets -> example Attempting to create object of type org.apache.tools.ant.helper.DefaultExecutor Adding reference: ant.executor Build sequence for target(s) `example' is [example] Complete build sequence is [example, ] example: [ftp] Opening FTP connection to localhost [ftp] connected [ftp] logging in to FTP server [ftp] login succeeded [ftp] getting files fileset: Setup scanner in dir G:\ftp\downloads with patternSet{ includes: [root1.txt, root2.txt, a/a.txt, a/b/ab.txt] excludes: [] } will try to cd to A where a directory called a exists testing case sensitivity, attempting to cd to A remote system is case sensitive : false [ftp] Hidden file \\a\b\ assumed to not be a symlink. filelist map used in listing files filelist map used in listing files [ftp] Hidden file \\a\b\ assumed to not be a symlink. filelist map used in listing files filelist map used in listing files filelist map used in listing files filelist map used in listing files filelist map used in listing files [ftp] Hidden file \\a\a.txt assumed to not be a symlink. filelist map used in listing files [ftp] Hidden file \\a\a.txt assumed to not be a symlink. filelist map used in listing files filelist map used in listing files filelist map used in listing files [ftp] transferring root1.txt to G:\ftp\downloads\root1.txt [ftp] File G:\ftp\downloads\root1.txt copied from localhost [ftp] transferring root2.txt to G:\ftp\downloads\root2.txt [ftp] File G:\ftp\downloads\root2.txt copied from localhost [ftp] 2 files retrieved [ftp] disconnecting [ftp] Opening FTP connection to localhost [ftp] connected [ftp] logging in to FTP server [ftp] login succeeded [ftp] getting files fileset: Setup scanner in dir G:\ftp\downloads with patternSet{ includes: [**/*] excludes: [] } will try to cd to A where a directory called a exists testing case sensitivity, attempting to cd to A remote system is case sensitive : false [ftp] transferring a\a.txt to G:\ftp\downloads\a\a.txt [ftp] File G:\ftp\downloads\a\a.txt copied from localhost [ftp] transferring a\b\ab.txt to G:\ftp\downloads\a\b\ab.txt [ftp] File G:\ftp\downloads\a\b\ab.txt copied from localhost [ftp] transferring c\c.txt to G:\ftp\downloads\c\c.txt [ftp] File G:\ftp\downloads\c\c.txt copied from localhost [ftp] transferring root1.txt to G:\ftp\downloads\root1.txt [ftp] File G:\ftp\downloads\root1.txt copied from localhost [ftp] transferring root2.txt to G:\ftp\downloads\root2.txt [ftp] File G:\ftp\downloads\root2.txt copied from localhost [ftp] 5 files retrieved [ftp] disconnecting BUILD SUCCESSFUL Total time: 0 seconds server log (000153) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> Connected, sending welcome message... (000153) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> 220-FileZilla Server version 0.9.34 beta (000153) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> 220-written by Tim Kosse ([email protected]) (000153) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> 220 Please visit http://sourceforge.net/projects/filezilla/ (000153) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> USER example (000153) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> 331 Password required for example (000153) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> PASS ******* (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 230 Logged on (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> TYPE I (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Type set to I (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> SYST (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 215 UNIX emulated by FileZilla (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PORT 127,0,0,1,207,232 (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Port command successful (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> LIST (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 150 Opening data channel for directory list. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 226 Transfer OK (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD A (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/A" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD a (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/a" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD b (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/a/b" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD //a/b (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/a/b" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/a/b" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PORT 127,0,0,1,207,233 (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Port command successful (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> LIST (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 150 Opening data channel for directory list. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 226 Transfer OK (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PORT 127,0,0,1,207,234 (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Port command successful (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> LIST (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 150 Opening data channel for directory list. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 226 Transfer OK (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD //\\a\b\ (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/a/b" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/a/b" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD //\\a\b\ (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/a/b" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/a/b" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD a (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/a" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD //a (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/a" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/a" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PORT 127,0,0,1,207,235 (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Port command successful (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> LIST (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 150 Opening data channel for directory list. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 226 Transfer OK (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PORT 127,0,0,1,207,236 (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Port command successful (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> RETR root1.txt (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 150 Opening data channel for file transfer. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 226 Transfer OK (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PORT 127,0,0,1,207,237 (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Port command successful (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> RETR root2.txt (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 150 Opening data channel for file transfer. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 226 Transfer OK (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> QUIT (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 221 Goodbye (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> disconnected. (000154) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> Connected, sending welcome message... (000154) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> 220-FileZilla Server version 0.9.34 beta (000154) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> 220-written by Tim Kosse ([email protected]) (000154) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> 220 Please visit http://sourceforge.net/projects/filezilla/ (000154) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> USER example (000154) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> 331 Password required for example (000154) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> PASS ******* (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 230 Logged on (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> TYPE I (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Type set to I (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> SYST (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 215 UNIX emulated by FileZilla (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> PORT 127,0,0,1,207,239 (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> LIST (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 150 Opening data channel for directory list. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD A (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/A" is current directory. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> PORT 127,0,0,1,207,240 (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> LIST (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 150 Opening data channel for directory list. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CWD / (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CWD a (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 250 CWD successful. "/a" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> PORT 127,0,0,1,207,241 (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> LIST (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 150 Opening data channel for directory list. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CWD //a/ (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 250 CWD successful. "/a" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CWD b (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 250 CWD successful. "/a/b" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> PORT 127,0,0,1,207,242 (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> LIST (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 150 Opening data channel for directory list. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CDUP (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 CDUP successful. "/a" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CDUP (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 CDUP successful. "/" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CWD / (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CWD c (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 250 CWD successful. "/c" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> PORT 127,0,0,1,207,243 (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> LIST (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 150 Opening data channel for directory list. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CDUP (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 CDUP successful. "/" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CDUP (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 CDUP successful. "/" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CWD / (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> PORT 127,0,0,1,207,244 (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> RETR a/a.txt (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 150 Opening data channel for file transfer. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> PORT 127,0,0,1,207,245 (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> RETR a/b/ab.txt (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 150 Opening data channel for file transfer. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> PORT 127,0,0,1,207,246 (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> RETR c/c.txt (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 150 Opening data channel for file transfer. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> PORT 127,0,0,1,207,247 (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> RETR root1.txt (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 150 Opening data channel for file transfer. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> PORT 127,0,0,1,207,248 (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> RETR root2.txt (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 150 Opening data channel for file transfer. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> QUIT (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 221 Goodbye (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> disconnected.

  Read the article

• SqlBulkCopy is slow, doesn't utilize full network speed

  - by Alex

  Hi, for that past couple of weeks I have been creating generic script that is able to copy databases. The goal is to be able to specify any database on some server and copy it to some other location, and it should only copy the specified content. The exact content to be copied over is specified in a configuration file. This script is going to be used on some 10 different databases and run weekly. And in the end we are copying only about 3%-20% of databases which are as large as 500GB. I have been using the SMO assemblies to achieve this. This is my first time working with SMO and it took a while to create generic way to copy the schema objects, filegroups ...etc. (Actually helped find some bad stored procs). Overall I have a working script which is lacking on performance (and at times times out) and was hoping you guys would be able to help. When executing the WriteToServer command to copy large amount of data ( 6GB) it reaches my timeout period of 1hr. Here is the core code for copying table data. The script is written in PowerShell. $query = ("SELECT * FROM $selectedTable " + $global:selectiveTables.Get_Item($selectedTable)).Trim() Write-LogOutput "Copying $selectedTable : '$query'" $cmd = New-Object Data.SqlClient.SqlCommand -argumentList $query, $source $cmd.CommandTimeout = 120; $bulkData = ([Data.SqlClient.SqlBulkCopy]$destination) $bulkData.DestinationTableName = $selectedTable; $bulkData.BulkCopyTimeout = $global:tableCopyDataTimeout # = 3600 $reader = $cmd.ExecuteReader(); $bulkData.WriteToServer($reader); # Takes forever here on large tables The source and target databases are located on different servers so I kept track of the network speed as well. The network utilization never went over 1% which was quite surprising to me. But when I just transfer some large files between the servers, the network utilization spikes up to 10%. I have tried setting the $bulkData.BatchSize to 5000 but nothing really changed. Increasing the BulkCopyTimeout to an even greater amount would only solve the timeout. I really would like to know why the network is not being used fully. Anyone else had this problem? Any suggestions on networking or bulk copy will be appreciated. And please let me know if you need more information. Thanks. UPDATE I have tweaked several options that increase the performance of SqlBulkCopy, such as setting the transaction logging to simple and providing a table lock to SqlBulkCopy instead of the default row lock. Also some tables are better optimized for certain batch sizes. Overall, the duration of the copy was decreased by some 15%. And what we will do is execute the copy of each database simultaneously on different servers. But I am still having a timeout issue when copying one of the databases. When copying one of the larger databases, there is a table for which I consistently get the following exception: System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. It is thrown about 16 after it starts copying the table which is no where near my BulkCopyTimeout. Even though I get the exception that table is fully copied in the end. Also, if I truncate that table and restart my process for that table only, the tables is copied over without any issues. But going through the process of copying that entire database fails always for that one table. I have tried executing the entire process and reseting the connection before copying that faulty table, but it still errored out. My SqlBulkCopy and Reader are closed after each table. Any suggestions as to what else could be causing the script to fail at the point each time?

  Read the article

• Linking LLVM JIT Code to Static LLVM Libraries?

  - by inflector

  I'm in the process of implementing a cross-platform (Mac OS X, Windows, and Linux) application which will do lots of CPU intensive analysis of financial data. The bulk of the analysis engine will be written in C++ for speed reasons, with a user-accessible scripting engine interfacing with the C++ testing engine. I want to write several scripting front-ends over time to emulate other popular software with existing large user bases. The first front will be a VisualBasic-like scripting language. I'm thinking that LLVM would be perfect for my needs. Performance is very important because of the sheer amount of data; it can take hours or days to run a single run of tests to get an answer. I believe that using LLVM will also allow me to use a single back-end solution while I implement different front-ends for different flavors of the scripting language over time. The testing engine itself will be separated from the interface and testing will even take place in a separate process with progress and results being reported to the testing management interface. Tests will consist of scripting code integrated with the testing engine code. In a previous implementation of a similar commercial testing system I wrote, I built a fast interpreter which easily interfaced with the testing library because it was written in C++ and linked directly to the testing engine library. Callbacks from scripting code to testing library objects involved translating between the formats with significant overhead. I'm imagining that with LLVM, I could implement the callbacks into C++ directly so that I could make the scripting code work almost as if it had been written in C++. Likewise, if all the code was compiled to LLVM byte-code format, it seems like the LLVM optimizers could optimize across the boundaries between the scripting language and the testing engine code that was written in C++. I don't want to have to compile the testing engine every time. Ideally, I'd like to JIT compile only the scripting code. For small tests, I'd skip some optimization passes, while for large tests, I'd perform full optimizations during the link. So is this possible? Can I precompile the testing engine to a .o object file or .a library file and then link in the scripting code using the JIT? Finally, ideally, I'd like to have the scripting code implement specific methods as subclasses for a specific C++ class. So the C++ testing engine would only see C++ objects while the JIT setup code compiled scripting code that implemented some of the methods for the objects. It seems that if I used the right name mangling algorithm it would be relatively easy to set up the LLVM generation for the scripting language to look like a C++ method call which could then be linked into the testing engine. Thus the linking stage would go in two directions, calls from the scripting language into the testing engine objects to retrieve pricing information and test state information and calls from the testing engine of methods of some particular C++ objects where the code was supplied not from C++ but from the scripting language. In summary: 1) Can I link in precompiled (either .bc, .o, or .a) files as part of the JIT compilation, code-generation process? 2) Can I link in code using that the process in 1) above in such a way that I am able to create code that acts as if it was all written in C++?

  Read the article

• Search engine solution for Django that actually works?

  - by prometheus

  The story so far: Decided to go with Xapian as search backend because it has all search-engine features I was looking for, knows about Unicode, stemming, has few dependencies and requires no bloated app-server installation on top of it. Tried Django and Haystack (plus xapian-haystack, the backend glue code to tie Haystack to Xapian) because it was advertised on quite some blogs as "working". Did not work. Neither django-haystack nor the xapian-haystack project provide a version combination that actually works together. MASTER from both projects yields an error from Xapian, so it's not stable at all. Haystack 1.0.1 and xapian-haystack 1.0.x/1.1.0 are not API-compatible. Plus, in a minimally working installation of Haystack 1.0.1 and xapian-haystack MASTER, any complex query yields zero results due to errors in either django-haystack or xapian-haystack (I double-verified this), maybe because the unit-tests actually test very simple cases, and no edge-cases at all. Tried Djapian. The source-code is riddled with spelling errors (mind you, in variable names, not comments), documentation is also riddled with ambiguities and outdated information that will never lead to a working installation. Not surprisingly, users rarely ask for features but how to get it working in the first place. Next on the plate: exploring Solr (installing a Java environment plus Tomcat gives me headaches, the machine is RAM- and CPU-constrained), or Lucene (slightly less headaches, but still). Before I proceed spending more time with a solution that might or might not work as advertised, I'd like to know: Did anyone ever get an actual, real-world search solution working in Django? I'm serious. I find it really frustrating reading about "large problems mostly solved", and then realizing that you will never get a working installation from the source-code because, actually, all bloggers dealing with those "mostly solved problems" never went past basic installation and copy-pasting the official tutorials. So here are the requirements: must be able to search for 10-100 terms in one query must handle + (term must be present) and - (term must not be present), AND/OR must handle arbitrary grouping (i.e. parentheses around AND/OR) must allow for Django-ORM filtering before or after fulltext-search (i.e. pre-/post-processing of results with the full set of filters that Django knows about) alternatively, there must be a facility to bulk-fetch the result set and transform it into a QuerySet should be light on the machine, so preferably no humongous JVM and Java-based app-server installation Is there anything out there that does this? I'm not interested in anecdotal evidence, or references to some blog posts that claim it should be working. I'd like to hear from someone who actually has a fully-functional setup working in the real world, under real conditions, with real queries. EDIT: Let me repeat again that I'm not so much interested in anecdotal evidence that someone, somewhere has a somewhat running installation working with unspecified properties. I already went there, I read all the blog posts, mailing lists, I contacted the authors, but when it came to actual implementation of real-world scenarios, nothing ever worked as advertised. Also, and a user below brought that point up as well, considering the TCO of any project, I'm definitely not interested in hearing that someone, somewhere was able to pull it off once a vendor parachuted in an unknown number of specialists to monkey-patch the whole installation with specific domain-knowledge that's documented nowhere. So, please, if you claim you have a working installation that actually satisfies minimum requirements for a full-fledged search (see requirements above), please provide the following so that we can all benefit from a search solution for Django that actually solves the problem: exact Linux distribution, release version, exact release version of Haystack (or equivalent) and release version of search backend, exact release version of the search engine publicly (!) available documentation how to set up all components exactly in the way that your installation was set up such that the minimal requirements above are met. Thank you.

  Read the article

• Search engine solution for Django that actually works?

  - by prometheus

  The story so far: Decided to go with Xapian as search backend because it has all search-engine features I was looking for, knows about Unicode, stemming, has few dependencies and requires no bloated app-server installation on top of it. Tried Django and Haystack (plus xapian-haystack, the backend glue code to tie Haystack to Xapian) because it was advertised on quite some blogs as "working". Did not work. Neither django-haystack nor the xapian-haystack project provide a version combination that actually works together. MASTER from both projects yields an error from Xapian, so it's not stable at all. Haystack 1.0.1 and xapian-haystack 1.0.x/1.1.0 are not API-compatible. Plus, in a minimally working installation of Haystack 1.0.1 and xapian-haystack MASTER, any complex query yields zero results due to errors in either django-haystack or xapian-haystack (I double-verified this), maybe because the unit-tests actually test very simple cases, and no edge-cases at all. Tried Djapian. The source-code is riddled with spelling errors (mind you, in variable names, not comments), documentation is also riddled with ambiguities and outdated information that will never lead to a working installation. Not surprisingly, users rarely ask for features but how to get it working in the first place. Next on the plate: exploring Solr (installing a Java environment plus Tomcat gives me headaches, the machine is RAM- and CPU-constrained), or Lucene (slightly less headaches, but still). Before I proceed spending more time with a solution that might or might not work as advertised, I'd like to know: Did anyone ever get an actual, real-world search solution working in Django? I'm serious. I find it really frustrating reading about "large problems mostly solved", and then realizing that you will never get a working installation from the source-code because, actually, all bloggers dealing with those "mostly solved problems" never went past basic installation and copy-pasting the official tutorials. So here are the requirements: must be able to search for 10-100 terms in one query must handle + (term must be present) and - (term must not be present), AND/OR must handle arbitrary grouping (i.e. parentheses around AND/OR) must allow for Django-ORM filtering before or after fulltext-search (i.e. pre-/post-processing of results with the full set of filters that Django knows about) alternatively, there must be a facility to bulk-fetch the result set and transform it into a QuerySet should be light on the machine, so preferably no humongous JVM and Java-based app-server installation Is there anything out there that does this? I'm not interested in anecdotal evidence, or references to some blog posts that claim it should be working. I'd like to hear from someone who actually has a fully-functional setup working in the real world, under real conditions, with real queries. EDIT: Let me repeat again that I'm not so much interested in anecdotal evidence that someone, somewhere has a somewhat running installation working with unspecified properties. I already went there, I read all the blog posts, mailing lists, I contacted the authors, but when it came to actual implementation of real-world scenarios, nothing ever worked as advertised. Also, and a user below brought that point up as well, considering the TCO of any project, I'm definitely not interested in hearing that someone, somewhere was able to pull it off once a vendor parachuted in an unknown number of specialists to monkey-patch the whole installation with specific domain-knowledge that's documented nowhere. So, please, if you claim you have a working installation that actually satisfies minimum requirements for a full-fledged search (see requirements above), please provide the following so that we can all benefit from a search solution for Django that actually solves the problem: exact Linux distribution, release version, exact release version of Haystack (or equivalent) and release version of search backend, exact release version of the search engine publicly (!) available documentation how to set up all components exactly in the way that your installation was set up such that the minimal requirements above are met. Thank you.

  Read the article

• Should we develop a custom membership provider in this case?

  - by Allen

  I'll be adding a bounty to this, probably 200, more if you guys think its appropriate. I wont accept an answer until I can add a bounty so feel free to go ahead and answer now Summary Long story short, we've been tasked with gutting the authentication and authorization parts of a fairly old and bloated asp.net application that previously had all of these components written from scratch. Since our application isn't a typical one, and none of us have experience in asp.net's built in membership provider stuff, we're not sure if we should roll our own authentication and authorization again or if we should try to work within the asp.net membership provider mindset and develop our own membership provider. Our Application We have a fairly old asp.net application that gets installed at customer locations to service clients on a LAN. Admins create users (users do not sign up) and depending on the install, we may have the software integrated with LDAP. Currently, the LDAP integration bulk-imports the users to our database and when they login, it authenticates against LDAP so we dont have to manage their passwords. Nothing amazing there. Admins can assign users to 1 group and they can change the authorization of that group to manage access to various parts of the software. Groups are maintained by Admins (web based UI) and as said earlier, granted / denied permissions to certain functionality within the application. All this was completely written from the ground up without using any of the built in .net authorization or authentication. We literally have IsLoggedIn() methods that check for login and redirect to our login page if they aren't. Our Rewrite We've been tasked to integrate more tightly with LDAP, they want us to tie groups in our application to groups (or whatever types of containers that LDAP uses) in LDAP so that when a customer opt's to use our LDAP integration, they dont have to manage their users in LDAP AND in our application. The new way, they will simply create users in LDAP, add them to Groups in LDAP and our application will see that they belong to the appropriate LDAP group and authenticate and authorize them. In addition, we've been granted the go ahead to completely rip out the User authentication and authorization code and completely re-do it. Our Problem The problem is that none of us have any experience with asp.net membership provider functionality. The little bit of exposure I have to it makes me worry that it was not intended to be used for an application such as ours. Though, developing our own ASP.NET Membership Provider and Role Manager sounds like it would be a great experience and most likely the appropriate thing to do. Basically, I'm looking for advice, should we be using the ASP.NET Membership provider & Role Management API or should we continue to roll our own? I know this decision will be influenced by our requirements so I'm going over them below Our Requirements Just a quick n dirty list Maintain the ability to have a db of users and authenticate them and give admins (only, not users) the ability to CRUD users Allow the site to integrate with LDAP, when this is chosen, they don't want any users stored in the DB, only the relationship between Groups as they exist in our app / db and the Groups/Containers as they exist in LDAP. .net 3.5 is being used (mix of asp.net webforms and asp.net mvc) Has to work in ASP.NET and ASP.NET MVC (shouldn't be a problem I'm guessing) This can't be user centric, administrators need to be the only ones that CRUD (or import via ldap) users and groups We have to be able to Auth via LDAP when its configured to do so I always try to monitor my questions closely so feel free to ask for more info. Also, as a general summary of what I'm looking for in an answer is just. "You should/shouldn't use xyz, here's why". Links regarding asp.net membership provider and role management stuff are very welcome, most of the stuff I'm finding is 5+ years old. Edit: Added some stuff to "Our Rewrite"

  Read the article

• Outlook Plug-In for custom CRM

  - by Optimal Solutions

  I would like to write a plug-in that will allow a custom written CRM to read and write to their local Outlook client. I know that this poses a security concern. But, my clients are asking that their CRM "be connected" to Outlook. They would like to be able to do the following: A) When a contact sends them an email (reply or free standing email), they'd like the details of this email to go INTO the CRM. Yep. They would like me to save the body, time and date it was sent, etc. B) They want to be able to send new emails (or replies to existing emails) from within the CRM itself. Basically, "a form that looks like Outlook's send/reply email form". C) Want the ability to search for contacts and the related emails with a search for tags/keywords facility. (i.e. if a product name or code appears in an email then they want the email returned in the search). D) Having performed a search of many contacts, they will want to prepare a mailer and shoot out some sort of email announcement to their qualified leads. This could be 50, 100, or more persons. So its got to be able to allow bulk mailing. E) Given a list of new prospects, that arent currently contacts in the CRM, they will want to do the same and if they get replies from this mailer to the prospects, the will want the replies to be saved in the DB and contacts be inserted into the DB. F) They would like to be able to utilize the calendar and task list facilities of Outlook from the CRM, as well. More or less, they want this pretty basic (as it is today) CRM that I created to integrate with Outlook and have it do so seamlessly as if it was an add-on to the CRM. A plug-in is what I am thinking... But, I dont know where to begin. My environment is Windows XP/Vista and is going to be ASP.NET and I am going to use the VB.NET language to accomplish this. What do I need? Are there resources out there that can describe how to build a plug-in to Outlook as I have been asked to? This is not Exchange, none of the clients use exchange (not so far). They all run Outlook. Mostly 2003. Most clients are XP right now but some are upgrading to Vista. For some reason I cant seem to wrap my head around this. I think the whole security issue is thwarting my ability to see past what is probably a simple thing. The client doesnt want to be prompted by any security messages asking them if they are sure they want to send 382 emails to their contacts. Not once and certainly not 382 times. Where do I begin? I've searched the internet for similar but mainly what I found are already-written products and I've got to write this from scratch.

  Read the article

• What's the most unsound program you've had to maintain?

  - by Robert Rossney

  I periodically am called upon to do maintenance work on a system that was built by a real rocket surgeon. There's so much wrong with it that it's hard to know where to start. No, wait, I'll start at the beginning: in the early days of the project, the designer was told that the system would need to scale, and he'd read that a source of scalability problems was traffic between the application and database servers, so he made sure to minimize this traffic. How? By putting all of the application logic in SQL Server stored procedures. Seriously. The great bulk of the application functions by the HTML front end formulating XML messages. When the middle tier receives an XML message, it uses the document element's tag name as the name of the stored procedure it should call, and calls the SP, passing it the entire XML message as a parameter. It takes the XML message that the SP returns and returns it directly back to the front end. There is no other logic in the application tier. (There was some code in the middle tier to validate the incoming XML messages against a library of schemas. But I removed it, after ascertaining that 1) only a small handful of messages had corresponding schemas, 2) the messages didn't actually conform to these schemas, and 3) after validating the messages, if any errors were encountered, the method discarded them. "This fuse box is a real time-saver - it comes from the factory with pennies pre-installed!") I've seen software that does the wrong thing before. Lots of it. I've written quite a bit. But I've never seen anything like the steely-eyed determination to do the wrong thing, at every possible turn, that's embodied in the design and programming of this system. Well, at least he went with what he knew, right? Um. Apparently, what he knew was Access. And he didn't really understand Access. Or databases. Here's a common pattern in this code: SELECT @TestCodeID FROM TestCode WHERE TestCode = @TestCode SELECT @CountryID FROM Country WHERE CountryAbbr = @CountryAbbr SELECT Invoice.*, TestCode.*, Country.* FROM Invoice JOIN TestCode ON Invoice.TestCodeID = TestCode.ID JOIN Country ON Invoice.CountryID = Country.ID WHERE Invoice.TestCodeID = @TestCodeID AND Invoice.CountryID = @CountryID Okay, fine. You don't trust the query optimizer either. But how about this? (Originally, I was going to post this in What's the best comment in source code you have ever encountered? but I realized that there was so much more to write about than just this one comment, and things just got out of hand.) At the end of many of the utility stored procedures, you'll see code that looks like the following: -- Fix NULLs SET @TargetValue = ISNULL(@TargetValue, -9999) Yes, that code is doing exactly what you can't allow yourself to believe it's doing lest you be driven mad. If the variable contains a NULL, he's alerting the caller by changing its value to -9999. Here's how this number is commonly used: -- Get target value EXEC ap_GetTargetValue @Param1, @Param2, OUTPUT @TargetValue -- Check target value for NULL value IF @TargetValue = -9999 ... Really. For another dimension of this system, see the article on thedailywtf.com entitled I Think I'll Call Them "Transactions". I'm not making any of this up. I swear. I'm often reminded, when I work on this system, of Wolfgang Pauli's famous response to a student: "That isn't right. It isn't even wrong." This can't really be the very worst program ever. It's definitely the worst one I've worked

  Read the article

• Replace conditional with polymorphism refactoring or similar?

  - by Anders Svensson

  Hi, I have tried to ask a variant of this question before. I got some helpful answers, but still nothing that felt quite right to me. It seems to me this shouldn't really be that hard a nut to crack, but I'm not able to find an elegant simple solution. (Here's my previous post, but please try to look at the problem stated here as procedural code first so as not to be influenced by the earlier explanation which seemed to lead to very complicated solutions: http://stackoverflow.com/questions/2772858/design-pattern-for-cost-calculator-app ) Basically, the problem is to create a calculator for hours needed for projects that can contain a number of services. In this case "writing" and "analysis". The hours are calculated differently for the different services: writing is calculated by multiplying a "per product" hour rate with the number of products, and the more products are included in the project, the lower the hour rate is, but the total number of hours is accumulated progressively (i.e. for a medium-sized project you take both the small range pricing and then add the medium range pricing up to the number of actual products). Whereas for analysis it's much simpler, it is just a bulk rate for each size range. How would you be able to refactor this into an elegant and preferably simple object-oriented version (please note that I would never write it like this in a purely procedural manner, this is just to show the problem in another way succinctly). I have been thinking in terms of factory, strategy and decorator patterns, but can't get any to work well. (I read Head First Design Patterns a while back, and both the decorator and factory patterns described have some similarities to this problem, but I have trouble seeing them as good solutions as stated there. The decorator example seems very complicated for just adding condiments, but maybe it could work better here, I don't know. And the factory pattern example with the pizza factory...well it just seems to create such a ridiculous explosion of classes, at least in their example. I have found good use for factory patterns before, but I can't see how I could use it here without getting a really complicated set of classes) The main goal would be to only have to change in one place (loose coupling etc) if I were to add a new parameter (say another size, like XSMALL, and/or another service, like "Administration"). Here's the procedural code example: public class Conditional { private int _numberOfManuals; private string _serviceType; private const int SMALL = 2; private const int MEDIUM = 8; public int GetHours() { if (_numberOfManuals <= SMALL) { if (_serviceType == "writing") return 30 * _numberOfManuals; if (_serviceType == "analysis") return 10; } else if (_numberOfManuals <= MEDIUM) { if (_serviceType == "writing") return (SMALL * 30) + (20 * _numberOfManuals - SMALL); if (_serviceType == "analysis") return 20; } else //i.e. LARGE { if (_serviceType == "writing") return (SMALL * 30) + (20 * (MEDIUM - SMALL)) + (10 * _numberOfManuals - MEDIUM); if (_serviceType == "analysis") return 30; } return 0; //Just a default fallback for this contrived example } } All replies are appreciated! I hope someone has a really elegant solution to this problem that I actually thought from the beginning would be really simple... Regards, Anders

  Read the article

• Strange issues with view switcher after object animator animations

  - by Barry Irvine

  I have two LinearLayout views that contain a number of edit texts and checkboxes for entering user information (name, email address etc). When a validation fails on one of these fields a gone textview is displayed showing the validation error. I have enclosed the two layouts within a ViewSwitcher and I animate between the two views using the ObjectAnimator class. (Since the code needs to support older versions of Android I am actually using the nineoldandroids backwards compatibility library for this). The bulk of the work is performed in my switchToChild method. If I flip the views more than twice then I start to run into strange errors. Firstly although the correct child view of the view animator is displayed it seems that the other view has focus and I can click on the views beneath the current one. I resolved this issue by adding a viewSwitcher.bringChildToFront at the end of the first animation. When I do this however and perform a validation on the 2nd view the "gone" view that I have now set to visible is not displayed (as if the linearlayout is never being re-measured). Here is a subset of the XML file: <ScrollView android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_below="@+id/TitleBar" android:scrollbarAlwaysDrawVerticalTrack="true" android:scrollbarStyle="outsideOverlay" android:scrollbars="vertical" > <ViewSwitcher android:id="@+id/switcher" android:layout_width="fill_parent" android:layout_height="wrap_content" > <LinearLayout android:id="@+id/page_1" android:layout_width="fill_parent" android:layout_height="wrap_content" android:orientation="vertical" > <!-- Lots of subviews here --> <LinearLayout android:id="@+id/page_2" android:layout_width="fill_parent" android:layout_height="wrap_content" android:orientation="vertical" > And this is the main method for flipping between the views: private void switchToChild(final int child) { final ViewSwitcher viewSwitcher = (ViewSwitcher) findViewById(R.id.switcher); if (viewSwitcher.getDisplayedChild() != child) { final Interpolator accelerator = new AccelerateInterpolator(); final Interpolator decelerator = new DecelerateInterpolator(); final View visibleView; final View invisibleView; switch (child) { case 0: visibleView = findViewById(R.id.page_2); invisibleView = findViewById(R.id.page_1); findViewById(R.id.next).setVisibility(View.VISIBLE); findViewById(R.id.back).setVisibility(View.GONE); break; case 1: default: visibleView = findViewById(R.id.page_1); invisibleView = findViewById(R.id.page_2); findViewById(R.id.back).setVisibility(View.VISIBLE); findViewById(R.id.next).setVisibility(View.GONE); break; } final ObjectAnimator visToInvis = ObjectAnimator.ofFloat(visibleView, "rotationY", 0f, 90f).setDuration(250); visToInvis.setInterpolator(accelerator); final ObjectAnimator invisToVis = ObjectAnimator.ofFloat(invisibleView, "rotationY", -90f, 0f).setDuration(250); invisToVis.setInterpolator(decelerator); visToInvis.addListener(new AnimatorListenerAdapter() { @Override public void onAnimationEnd(Animator anim) { viewSwitcher.showNext(); invisToVis.start(); viewSwitcher.bringChildToFront(invisibleView); // If I don't do this the old view can have focus } }); visToInvis.start(); } } Does anyone have any ideas? This is really confusing me!

  Read the article

• Async networking + threading problem

  - by randallmeadows

  I kick off a network request, assuming no login credentials are required to talk to the destination server. If they are required, then I get an authentication challenge, at which point I display a view requesting said credentials from the user. When they are supplied, I restart the network request, using those credentials. That's all fine and dandy, as long as I only do one request at a time. But I'm not, typically. When both requests are kicked off, I get the first challenge, and present the prompt (using -presentModalViewController:). Then the 2nd challenge comes in. And I crash when it tries to display the 2nd prompt. I have the bulk of this wrapped in an @synchronized() block, but this has no effect because these delegate methods are all being called on the same (main) thread. The docs say the delegate methods are called on the same thread in which the connection was started. OK, no problem; I'll just write a method that I run on a background thread using -performSelectorInBackground: NSURLConnection *connection = [[NSURLConnection alloc] initWithRequest:request delegate:self startImmediately:NO]; [connections addObject:connection]; [self performSelectorInBackground:@selector(startConnection:) withObject:connection]; [connection release]; - (void)startConnection:(NSURLConnection *)connection { NSAutoreleasePool *pool = [NSAutoreleasePool new]; [connection scheduleInRunLoop:[NSRunLoop currentRunLoop] forMode:NSDefaultRunLoopMode]; [connection start]; [pool drain]; } which should put every network request, and its callbacks, on its own thread, and then my @synchronized() blocks will take effect. The docs for -initWithRequest:... state "Messages to the delegate will be sent on the thread that calls this method. By default, for the connection to work correctly the calling thread’s run loop must be operating in the default run loop mode." Ok, I'm doing that. They also state "If you pass NO [for startImmediately], you must schedule the connection in a run loop before starting it." OK, I'm doing that, too. Furthermore, the docs for NSRunLoop state "Each NSThread object, including the application’s main thread, has an NSRunLoop object automatically created for it as needed. If you need to access the current thread’s run loop, you do so with the class method currentRunLoop." I'm assuming this applies to the background thread created by the call -performSelectorInBackground... (which does appear to be the case, when I execute 'po [NSClassFromString(@"NSRunLoop") currentRunLoop]' in the -startConnection: method). The -startConnection: method is indeed being called. But after kicking off the connection, I now never get any callbacks on it. None of the -connectionDid… delegate methods. (I even tried explicitly starting the thread's run loop, but that made no difference; I've used threads like this before, and I've never had to start the run loop manually before--but I'm now grasping at straws...) I think I've come up with a workaround such that I only handle one request at a time, but it's kludgy and I'd like to do this the Right Way. But, what am I missing here? Thanks! randy

  Read the article

• Which of CouchDB or MongoDB suits my needs?

  - by vonconrad

  Where I work, we use Ruby on Rails to create both backend and frontend applications. Usually, these applications interact with the same MySQL database. It works great for a majority of our data, but we have one situation which I would like to move to a NoSQL environment. We have clients, and our clients have what we call "inventories"--one or more of them. An inventory can have many thousands of items. This is currently done through two relational database tables, inventories and inventory_items. The problems start when two different inventories have different parameters: # Inventory item from inventory 1, televisions { inventory_id: 1 sku: 12345 name: Samsung LCD 40 inches model: 582903-4 brand: Samsung screen_size: 40 type: LCD price: 999.95 } # Inventory item from inventory 2, accomodation { inventory_id: 2 sku: 48cab23fa name: New York Hilton accomodation_type: hotel star_rating: 5 price_per_night: 395 } Since we obviously can't use brand or star_rating as the column name in inventory_items, our solution so far has been to use generic column names such as text_a, text_b, float_a, int_a, etc, and introduce a third table, inventory_schemas. The tables now look like this: # Inventory schema for inventory 1, televisions { inventory_id: 1 int_a: sku text_a: name text_b: model text_c: brand int_b: screen_size text_d: type float_a: price } # Inventory item from inventory 1, televisions { inventory_id: 1 int_a: 12345 text_a: Samsung LCD 40 inches text_b: 582903-4 text_c: Samsung int_a: 40 text_d: LCD float_a: 999.95 } This has worked well... up to a point. It's clunky, it's unintuitive and it lacks scalability. We have to devote resources to set up inventory schemas. Using separate tables is not an option. Enter NoSQL. With it, we could let each and every item have their own parameters and still store them together. From the research I've done, it certainly seems like a great alterative for this situation. Specifically, I've looked at CouchDB and MongoDB. Both look great. However, there are a few other bits and pieces we need to be able to do with our inventory: We need to be able to select items from only one (or several) inventories. We need to be able to filter items based on its parameters (eg. get all items from inventory 2 where type is 'hotel'). We need to be able to group items based on parameters (eg. get the lowest price from items in inventory 1 where brand is 'Samsung'). We need to (potentially) be able to retrieve thousands of items at a time. We need to be able to access the data from multiple applications; both backend (to process data) and frontend (to display data). Rapid bulk insertion is desired, though not required. Based on the structure, and the requirements, are either CouchDB or MongoDB suitable for us? If so, which one will be the best fit? Thanks for reading, and thanks in advance for answers. EDIT: One of the reasons I like CouchDB is that it would be possible for us in the frontend application to request data via JavaScript directly from the server after page load, and display the results without having to use any backend code whatsoever. This would lead to better page load and less server strain, as the fetching/processing of the data would be done client-side.

  Read the article

• insert xml into sql server

  - by JonDog

  ok, so I know there are a bunch of other post on importing xml to sql server but I just cant seem to figure it out. I think my problem may have to do with having multi-levels. Can anyone help please. My xml, sql table, and the code i've tried. thanks in advance. <items> <item> <sku> <value> the_sku </value> </sku> <short_dis2> <value> short_discription2 <value/> </short_dis2> <short_dis1> <value> short_discription1 </value> </short_dis1> <title> <value> product_title </value> </title> <detailSpec> <value> detailed_specification_html </value> </detailSpec> <basicSpec> <value> basic_overview_html </value> </basicSpec> <basicSpecHeading> <value> besic_spec_heading </value> </basicSpecHeading> <detailSpecHeading> <value> detailed_specifications_heading </value> </detailSpecHeading> <model> <value> the_model_number </value> </model> <image_file_name> <value> the_image_url </value> </image_file_name> </item> ... CREATE TABLE [dbo].[products]( [sku] [nchar](15) NOT NULL, [model] [nvarchar](50) NULL, [title] [ntext] NULL, [short_dis1] [ntext] NULL, [short_dis2] [ntext] NULL, [basicSpecHeading] [ntext] NULL, [basicSpec] [ntext] NULL, [detailSpecHeading] [ntext] NULL, [detailSpec] [ntext] NULL, [image_file_name] [nchar](100) NULL INSERT INTO products (sku, short_dis2,short_dis1,title,detailSpec,basicSpec,basicSpecHeading,detailSpecHeading,model,image_file_name) SELECT X.product.query('sku').value('.', 'nchar(15)'), X.product.query('short_dis2').value('.', 'nvarchar(max)'), X.product.query('short_dis1').value('.', 'nvarchar(max)'), X.product.query('title').value('.', 'nvarchar(max)'), X.product.query('detailSpec').value('.', 'nvarchar(max)'), X.product.query('basicSpec').value('.', 'nvarchar(max)'), X.product.query('basicSpecHeading').value('.', 'nvarchar(max)'), X.product.query('detailSpecHeading').value('.', 'nvarchar(max)'), X.product.query('model').value('.', 'nvarchar(max)'), X.product.query('image_file_name').value('.', 'nvarchar(max)') FROM ( SELECT CAST(x AS XML) FROM OPENROWSET( BULK 'C:\users\me\desktop\xml_sample.xml', SINGLE_BLOB) AS T(x) ) AS T(x) CROSS APPLY x.nodes('Products/Product') AS X(product);

  Read the article

• Fortigate Remote VPN : no matching gateway for new request

  - by Kedare

  I am trying to configure a Fortigate 60C to act as an IPSec endpoint for remote VPN. I configured it like this : SCR-F0-FGT100C-1 # diagnose vpn ike config vd: root/0 name: SCR-REMOTEVPN serial: 7 version: 1 type: dynamic mode: aggressive dpd: enable retry-count 3 interval 5000ms auth: psk dhgrp: 2 xauth: server-auto xauth-group: VPN-group interface: wan1 distance: 1 priority: 0 phase2s: SCR-REMOTEVPN-PH2 proto 0 src 0.0.0.0/0.0.0.0:0 dst 0.0.0.0/0.0.0.0:0 dhgrp 5 replay keep-alive dhcp policies: none Here is the configuration: config vpn ipsec phase1-interface edit "SCR-REMOTEVPN" set type dynamic set interface "wan1" set dhgrp 2 set xauthtype auto set mode aggressive set proposal aes256-sha1 aes256-md5 set authusrgrp "VPN-group" set psksecret ENC xxx next config vpn ipsec phase2-interface edit "SCR-REMOTEVPN-PH2" set keepalive enable set phase1name "SCR-REMOTEVPN" set proposal aes256-sha1 aes256-md5 set dhcp-ipsec enable next end But when I try to connect from a remote device (I tested with an Android Phone), the phone fail to connect and the fortinet return this error : 2012-07-20 13:08:51 log_id=0101037124 type=event subtype=ipsec pri=error vd="root" msg="IPsec phase 1 error" action="negotiate" rem_ip=xxx loc_ip=xxx rem_port=1049 loc_port=500 out_intf="wan1" cookies="xxx" user="N/A" group="N/A" xauth_user="N/A" xauth_group="N/A" vpn_tunnel="N/A" status=negotiate_error error_reason=no matching gateway for new request peer_notif=INITIAL-CONTACT I tried searching on the web, but i did not find anything revelant to this. Do you have any idea of what can be the problem ? I tried many combinaisons of settings on the fortigate without success..

  Read the article

• SQL Server express service is not starting

  - by Mahdi Ghiasi

  I've bought my first VPS yesterday, and I have installed Microsoft SQL Server 2012 Express on it. Then I have restarted my VPS. But SQL Server Service didn't start. I've tried to start it manually, but It can't start: What is the problem? How to solve it? P.S: This is my first server management, and I'm a newbie, if you need any further details about this, please leave a comment. I'll update the question. Update 1: This is some log details from Event viewer that I thought that they may be useful for this problem: FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBData.mdf for file number 1. OS error: 3(The system cannot find the path specified.). The resource database build version is 11.00.3000. This is an informational message only. No user action is required. FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf'. Diagnose and correct the operating system error, and retry the operation. Starting up database 'model'. FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\model.mdf for file number 1. OS error: 3(The system cannot find the path specified.). FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\modellog.ldf'. Diagnose and correct the operating system error, and retry the operation. I'm confused about these e:\s, my VPS has just one C:\ drive, So what is e:\ ?

  Read the article

• virtualbox installing iso Error "could not find a valid v7 on sda"

  - by MountainX

  I decided to try this suggestion to install Android x86 on Virtual Box. I'm following those steps and I'm at #4. I used the android-x86-4.0-RC1-amd_brazos.iso (because I have a ThinkPad that this might be compatible with and it seemed as good as any of the other choices...) I'm getting an endless series of errors: .[numbers] VFS: could not find a valid v7 on sda. .[numbers] VFS: could not find a valid v7 on sda. repeating... For storage, I made a VDI image sized at 4.0 GB (dynamically allocated) attached on SATA Port 0. Background and more details: I'm running Kubuntu 12.04. I installed VirtualBox 4.1.12 after adding deb http://download.virtualbox.org/virtualbox/debian precise contrib to my sources. EDIT: Now I'm wondering if I installed the right package. I verified that I'm running 4.1.12. But I installed it with apt-get install virtualbox instead of the recommended apt-get install virtualbox-4.1. I checked just now and see this: apt-cache search virtualbox virtualbox - x86 virtualization solution - base binaries virtualbox-4.1 - Oracle VM VirtualBox But when I run VirtualBox, I get the Oracle VM VirtualBox Manager version 4.1.12, so I think I'm OK. I did see one minor issue (possibly related to this question) when installing VB, but in my case I don't think it is actually an error at all: * No suitable module for running kernel found [fail] invoke-rc.d: initscript virtualbox, action "restart" failed. VirtualBox installed and seems to be running fine. I just can't get the ISO image to install. The error is as shown above.

  Read the article

• Port forwarding on Fortigate 50B

  - by sindre j

  I have serious problems setting up port forwarding on a Fortigate 50B. The unit is basically running as factory default, the wan1 interface is connected to my fibre optic internet modem, and my lan is connected to the internal switch of the Fortigate. The factory default firewall policy allowing traffic from the internal interface to wan1 is kept and I'm able to access the interet as normal. Then I added a virtual ip and a firewall policy for allowing access from the internet to my local servers (ip 192.168.9.51) webserver (standard port 80). The settings I made are as follows. Edit Virtual IP Mapping Name : Server VIP External interface : wan1 Type : Static NAT Extermal IP Address/Range : 0.0.0.0 Mapped IP Address/Range : 192.168.9.51 Port Forwading : not checked Firewall policy Source interface/Zone : wan1 Source address : all Destination interface/Zone : internal Destination address : Server VIP Schedule : always Service : HTTP Action : ACCEPT no other settings checked What happens now is that I'm unable to access internet from my server, I'm not getting through to the webserver from internet either. I'm able to ping a site on the outside, but all web traffic is blocked, both ways. I've checked the documentation, but as far as I can tell I have set this up correctly. Anyone here with knowledge of Fortigate port forwading/NAT?

  Read the article

• Hotmail Senders receiving NDR : "550-Please turn on SMTP Authentication in your mail client..."

  - by DKNUCKLES

  Recently, senders from Hotmail have begun to get the following NDR when trying to e-mail our domain. EDIT : Full NDR Message Action: failed Status: 5.5.0 Diagnostic-Code: smtp;550-Please turn on SMTP Authentication in your mail client, or login to the 550-IMAP/POP3 server before sending your message. 550-snt0-omc3-s36.snt0.hotmail.com [65.55.90.175]:49271 is not permitted to 550 relay through this server without authentication This is seemingly out of the blue and I'm at a loss as to why this is happening. Pertinent Information We have multiple domains hooked up to our Exchange server. We changed our company name in January of this year, and the old primary domain (olddomain.com) will accept e-mails from Hotmail accounts, however e-mails sent to the new primary domain (newdomain.com) bounce back with the NDR listed above. The bounces only appear to be happening when the Hotmail sender is sending a new e-mail, and not if they are responding to an e-mail sent from our end. We have made no changes to the configuration of our server recently. This e-mail first appeared last Friday. As far as I can tell, the mail doesn't even seem to get to our server We performed an Exchange 2003 to 2010 migration last year. The 2003 acts as a Smart Host Any advice on this issue would be greatly appreciated! I'm at a loss

  Read the article

• Fetching e-mails into Redmine via IMAP

  - by Danilo Bargen

  I'm trying to fetch e-mails into Redmine via IMAP. The e-mails I'm generating look like this: FooBar Ltd 123456 http://example.com/Foobar-Ltd-123456.html Project: backend Tracker: Dataerror Beschreibung: This is the description =========================== CLIENT_IP: 192.168.1.215 HTTP_USER_AGENT: mozilla/asdfjköl I try to fetch them into Redmine via this command: rake -f /var/www/projects/redmine/Rakefile redmine:email:receive_imap \ RAILS_ENV="production" host=example.com port=993 ssl=true username=redmine \ password=1234 project=myproject tracker=other \ allow_override=project,tracker,category,priority \ move_on_success=read move_on_failure=failed But the e-mails get moved into the failed folder. I had this setup running some time ago with a different e-mail generator but pretty much the same template, and I can't figure out why it's not working. The permissions seem to be OK too. In order to further debug this issue, I need some logfiles. Are there any logfiles written by this command? Or are there any other suggestions to solve this issue? My environment: danilo@jabba:/var/www/projects/redmine$ RAILS_ENV=production script/about About your application's environment Ruby version 1.8.7 (i486-linux) RubyGems version 1.3.5 Rack version 1.0 Rails version 2.3.5 Active Record version 2.3.5 Active Resource version 2.3.5 Action Mailer version 2.3.5 Active Support version 2.3.5 Application root /var/www/projects/redmine Environment production Database adapter mysql Database schema version 20100819172912

  Read the article

• WebSphere MQ running under local account / group cannot read group memberships for Active Directory user. Workaround or alternative resolution?

  - by noahz

  I am developing an application that is using WebSphere MQ v6.0. WebSphere MQ is currently not working due to the following issue: WebSphere MQ service runs under local user "MUSR_MQADMIN" in the local group "mqm" I attempt to use the service using my own account, BIZ\noahz MUSR_MQADMIN needs to check if BIZ\noahz is in local group "mqm" MUSR_MQADMIN does not have permission to read the Active Directory group membership of BIZ\noahz The following error appears in the MQ log file: ----- amqzfubn.c : 3582 ------------------------------------------------------- 1/31/2011 18:51:32 - Process(704.1105) User(MUSR_MQADMIN) Program(amqzlaa0.exe) AMQ8079: Access was denied when attempting to retrieve group membership information for user 'noahz@biz'. EXPLANATION: WebSphere MQ, running with the authority of user 'musr_mqadmin@noahz-biz', was unable to retrieve group membership information for the specified user. ACTION: Ensure Active Directory access permissions allow user 'musr_mqadmin@noahz-biz' to read group memberships for user 'noahz@biz'. To retrieve group membership information for a domain user, MQ must run with the authority of a domain user. ----- amqzfubn.c : 3582 ------------------------------------------------------- I found more information is here on IBM's web site: http://publib.boulder.ibm.com/infocenter/wmqv7/v7r0/index.jsp?topic=/com.ibm.mq.amqtac.doc/wq10830_.htm I don't have Active Directory admin rights for my Windows machine, so my question is: Is there anything else I can do to resolve (or work-around) this issue and get WebSphere MQ working for me again? For example, can I disable this security check in WebSphere MQ?

  Read the article

• NetApp FAS 2040 LDAP Win2k8R2

  - by it_stuck

  I am trying to get my FAS2040 to action user lookups using LDAP, below is the filer configuration options: filer> options ldap ldap.ADdomain dc1.colour.domain.local ldap.base OU=Users,OU=something1,OU=something2,OU=darkside,DC=colour,DC=domain,DC=local ldap.base.group ldap.base.netgroup ldap.base.passwd ldap.enable on ldap.minimum_bind_level anonymous ldap.name domain-admin-account ldap.nssmap.attribute.gecos gecos ldap.nssmap.attribute.gidNumber gidNumber ldap.nssmap.attribute.groupname cn ldap.nssmap.attribute.homeDirectory homeDirectory ldap.nssmap.attribute.loginShell loginShell ldap.nssmap.attribute.memberNisNetgroup memberNisNetgroup ldap.nssmap.attribute.memberUid memberUid ldap.nssmap.attribute.netgroupname cn ldap.nssmap.attribute.nisNetgroupTriple nisNetgroupTriple ldap.nssmap.attribute.uid uid ldap.nssmap.attribute.uidNumber uidNumber ldap.nssmap.attribute.userPassword userPassword ldap.nssmap.objectClass.nisNetgroup nisNetgroup ldap.nssmap.objectClass.posixAccount posixAccount ldap.nssmap.objectClass.posixGroup posixGroup ldap.passwd ****** ldap.port 389 ldap.servers ldap.servers.preferred ldap.ssl.enable off ldap.timeout 20 ldap.usermap.attribute.unixaccount unixaccount ldap.usermap.attribute.windowsaccount sAMAccountName ldap.usermap.base ldap.usermap.enable on output of nsswitch.conf: hosts: files dns passwd: ldap files netgroup: ldap files group: ldap files shadow: files nis Error Message(s): [filer: auth.ldap.trace.LDAPConnection.statusMsg:info]: AUTH: TraceLDAPServer- Starting AD LDAP server address discovery for dc1.colour.domain.LOCAL. [filer: auth.ldap.trace.LDAPConnection.statusMsg:info]: AUTH: TraceLDAPServer- Found no AD LDAP server addresses using DNS site query (site). [filer: auth.ldap.trace.LDAPConnection.statusMsg:info]: AUTH: TraceLDAPServer- Found no AD LDAP server addresses using generic DNS query. Could not get passwd entry for name = <random user> the filer can ping the FQDN of dc1 the filer can ping the IP of dc1 the filer cannot ping "dc1" I'm not sure where I'm going wrong, so any pointers would be great.

  Read the article

• Trying to run an ASP.NET MVC application using Mono on Apache with FastCGI.

  - by Arda Xi

  I have a hosting account with DreamHost, and I would like to use the same account to run ASP.NET applications. I have an application deployed in a subdomain, a .htaccess with a handler like this: # Define the FastCGI Mono launcher as an Apache handler and let # it manage this web-application (its files and subdirectories) SetHandler monoWrapper Action monoWrapper /home/arienh4/<domain>/cgi-bin/mono.fcgi virtual My mono.fcgi is set up as such: #!/bin/sh #umask 0077 exec >>/home/arienh4/tmp/mono-fcgi.log exec 2>>/home/arienh4/tmp/mono-fcgi.err echo $(date +"[%F %T]") Starting fastcgi-mono-server2 cd / chmod 0700 /home/arienh4/tmp/mono-fcgi.sock echo $$>/home/arienh4/tmp/mono-fcgi.pid # stdin is the socket handle export PATH="/home/arienh4/mono/bin:$PATH" export LD_LIBRARY_PATH="/home/arienh4/mono/lib:$LD_LIBRARY_PATH" export TMP="/home/arienh4/tmp" export MONO_SHARED_DIR="/home/arienh4/tmp" exec /home/arienh4/mono/bin/mono /home/arienh4/mono/lib/mono/2.0/fastcgi-mono-server2.exe \ /logfile=/home/arienh4/logs/fastcgi-mono-web.log /loglevels=All \ /applications=/:/home/arienh4/<domain> I took this from the Mono site for CGI, I'm not sure if I'm doing it correctly though. This code is resulting in this error: Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace. I have no idea what's causing this. As far as I can see, Mono isn't even hit (no log files are created).

  Read the article

• Why is my mouse randomly deselecting and unclicking?

  - by Coldblackice

  (Windows 7 x64, Logitech MX1100 mouse) If I click/hold/ the mouse, like on the title bar of a folder to move it, or to select text, the mouse will randomly "unselect" it and then randomly reselect at another point in the movement. For example, if I were to start mouse-selecting the above paragraph, starting with "movement." and then moving backwards, it might select as far as "reselect", but then the selection would disappear, only to start selecting again from "will randomly". I realize this would sound like a clear-cut case for a hardware issue in the mouse button, but I've narrowed out that that's not the case. The problem doesn't happen if I drag-move/drag-select slowly. But I can make the problem very apparent if I click and drag something fast. For example, if I click and hold the title bar of a window, and then start quickly dragging it around in circles across my monitor, the window will get "dropped", and a new window will get picked up in the process. Additionally, if I right-click anywhere to get a context menu (in Windows, programs, anywhere/everywhere), and then relatively quickly press the left mouse button to select something on the context menu, the context menu will disappear as if I had clicked "through" it. I haven't had any driver changes, system updates, or significant software changes/updates/installations recently, that might be a precursor to this issue. Again, the oddity seems to be the "speed" of action. Another note -- it seems that "lag" has a bit to do with it. If I click and drag a window around quickly, it might start to "lag" a tad bit, like it's perhaps moving too fast for Windows to keep up with the refresh/redraw rate, and that's usually synonymous with this odd deselect bug happening. (Batteries fully charged, no damage or recent changes to mouse, no changes that might affect/block wireless communication)

  Read the article

< Previous Page | 334 335 336 337 338 339 340 341 342 343 344 345  | Next Page >