Search Results

Search found 12773 results on 511 pages for 'ide controller'.

Page 338/511 | < Previous Page | 334 335 336 337 338 339 340 341 342 343 344 345  | Next Page >

• Setup access to SAS RAID drives with NTFS partitions on CentOS Machine

  - by Quanano

  We have a Dell Poweredge 2900 system with Adaptec 39320A SCSI CONTROLLER CARD and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on the other raid array with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log

  Read the article

• VS 2010 JavaScript editor – matching braces highlighting – is it so difficult to implement?

  - by AGS777

  I do not know. Just curious. But first things first. As a web developer I spend about 80% of my work-time editing JavaScript code. And since my server-side platform is .NET then it would be very convenient to have decent JavaScript text editor within Visual Studio IDE. So, Visual Studio 2010 is out. Downloaded and installed. What were my expectations regarding JavaScript editor? Pretty low, actually.  I just wanted to have matching braces highlighted eventually. That’s all. Yes, I know about Ctrl + ] shortcut but it is not event remotely close to convenience. And the result? Alas. Without further ado, just look at some real-world fragment of code from jQuery Templates Proposal experimental plugin as I see it in Notepad++, Notepad2 and Visual Studio 2010 editors respectively: Notepad++ Notepad2 Visual Studio 2010 Look at the highlighted parentheses, regular expression literals, numbers. Do you have a feeling that the last screenshot is not very informative in comparison with the other ones? If yes, then my question is why? Instead I was given an IntelliSense. Sorry, but I do not need it to rot my mind. Especially the one which does not always work properly (try to use it with base2 library for example). With all the expressive power of the language I have to know what I am doing. Instead I still have the same plain old Notepad with some of the JavaScript keywords colorized, plus partially functional/useful IntelliSense. What I do need, is just a little help to make less errors when I type the code – some essential text editor facilities that I really need. Give me that and only then feel free to improve on something else. Maybe I am wrong. Then, sorry. Just cannot believe that I have to wait for another couple of years to get very basic code editor feature.  

  Read the article

• Multi-tenant ASP.NET MVC – Introduction

  - by zowens

  I’ve read a few different blogs that talk about multi-tenancy and how to resolve some of the issues surrounding multi-tenancy. What I’ve come to realize is that these implementations overcomplicate the issues and give only a muddy implementation! I’ve seen some really illogical code out there. I have recently been building a multi-tenancy framework for internal use at eagleenvision.net. Through this process, I’ve realized a few different techniques to make building multi-tenant applications actually quite easy. I will be posting a few different entries over the issue and my personal implementation. In this first post, I will discuss what multi-tenancy means and how my implementation will be structured.   So what’s the problem? Here’s the deal. Multi-tenancy is basically a technique of code-reuse of web application code. A multi-tenant application is an application that runs a single instance for multiple clients. Here the “client” is different URL bindings on IIS using ASP.NET MVC. The problem with different instances of the, essentially, same application is that you have to spin up different instances of ASP.NET. As the number of running instances of ASP.NET grows, so does the memory footprint of IIS. Stack Exchange shifted its architecture to multi-tenancy March. As the blog post explains, multi-tenancy saves cost in terms of memory utilization and physical disc storage. If you use the same code base for many applications, multi-tenancy just makes sense. You’ll reduce the amount of work it takes to synchronize the site implementations and you’ll thank your lucky stars later for choosing to use one application for multiple sites. Multi-tenancy allows the freedom of extensibility while relying on some pre-built code.   You’d think this would be simple. I have actually seen a real lack of reference material on the subject in terms of ASP.NET MVC. This is somewhat surprising given the number of users of ASP.NET MVC. However, I will certainly fill the void ;). Implementing a multi-tenant application takes a little thinking. It’s not straight-forward because the possibilities of implementation are endless. I have yet to see a great implementation of a multi-tenant MVC application. The only one that comes close to what I have in mind is Rob Ashton’s implementation (all the entries are listed on this page). There’s some really nasty code in there… something I’d really like to avoid. He has also written a library (MvcEx) that attempts to aid multi-tenant development. This code is even worse, in my honest opinion. Once I start seeing Reflection.Emit, I have to assume the worst :) In all seriousness, if his implementation makes sense to you, use it! It’s a fine implementation that should be given a look. At least look at the code. I will reference MvcEx going forward as a comparison to my implementation. I will explain why my approach differs from MvcEx and how it is better or worse (hopefully better).   Core Goals of my Multi-Tenant Implementation The first, and foremost, goal is to use Inversion of Control containers to my advantage. As you will see throughout this series, I pass around containers quite frequently and rely on their use heavily. I will be using StructureMap in my implementation. However, you could probably use your favorite IoC tool instead. <RANT> However, please don’t be stupid and abstract your IoC tool. Each IoC is powerful and by abstracting the capabilities, you’re doing yourself a real disservice. Who in the world swaps out IoC tools…? No one!</RANT> (It had to be said.) I will outline some of the goodness of StructureMap as we go along. This is really an invaluable tool in my tool belt and simple to use in my multi-tenant implementation. The second core goal is to represent a tenant as easily as possible. Just as a dependency container will be a first-class citizen, so will a tenant. This allows us to easily extend and use tenants. This will also allow different ways of “plugging in” tenants into your application. In my implementation, there will be a single dependency container for a single tenant. This will enable isolation of the dependencies of the tenant. The third goal is to use composition as a means to delegate “core” functions out to the tenant. More on this later.   Features In MvcExt, “Modules” are a code element of the infrastructure. I have simplified this concept and have named this “Features”. A feature is a simple element of an application. Controllers can be specified to have a feature and actions can have “sub features”. Each tenant can select features it needs and the other features will be hidden to the tenant’s users. My implementation doesn’t require something to be a feature. A controller can be common to all tenants. For example, (as you will see) I have a “Content” controller that will return the CSS, Javascript and Images for a tenant. This is common logic to all tenants and shouldn’t be hidden or considered a “feature”; Content is a core component.   Up next My next post will be all about the code. I will reveal some of the foundation to the way I do multi-tenancy. I will have posts dedicated to Foundation, Controllers, Views, Caching, Content and how to setup the tenants. Each post will be in-depth about the issues and implementation details, while adhering to my core goals outlined in this post. As always, comment with questions of DM me on twitter or send me an email.

  Read the article

• Dependency Injection in ASP.NET Web API using Autofac

  - by shiju

  In this post, I will demonstrate how to use Dependency Injection in ASP.NET Web API using Autofac in an ASP.NET MVC 4 app. The new ASP.NET Web API is a great framework for building HTTP services. The Autofac IoC container provides the better integration with ASP.NET Web API for applying dependency injection. The NuGet package Autofac.WebApi provides the  Dependency Injection support for ASP.NET Web API services. Using Autofac in ASP.NET Web API The following command in the Package Manager console will install Autofac.WebApi package into your ASP.NET Web API application. PM > Install-Package Autofac.WebApi The following code block imports the necessary namespaces for using Autofact.WebApi using Autofac; using Autofac.Integration.WebApi; .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The following code in the Bootstrapper class configures the Autofac. 1: public static class Bootstrapper 2: { 3: public static void Run() 4: { 5: SetAutofacWebAPI(); 6: } 7: private static void SetAutofacWebAPI() 8: { 9: var configuration = GlobalConfiguration.Configuration; 10: var builder = new ContainerBuilder(); 11: // Configure the container 12: builder.ConfigureWebApi(configuration); 13: // Register API controllers using assembly scanning. 14: builder.RegisterApiControllers(Assembly.GetExecutingAssembly()); 15: builder.RegisterType<DefaultCommandBus>().As<ICommandBus>() 16: .InstancePerApiRequest(); 17: builder.RegisterType<UnitOfWork>().As<IUnitOfWork>() 18: .InstancePerApiRequest(); 19: builder.RegisterType<DatabaseFactory>().As<IDatabaseFactory>() 20: .InstancePerApiRequest(); 21: builder.RegisterAssemblyTypes(typeof(CategoryRepository) 22: .Assembly).Where(t => t.Name.EndsWith("Repository")) 23: .AsImplementedInterfaces().InstancePerApiRequest(); 24: var services = Assembly.Load("EFMVC.Domain"); 25: builder.RegisterAssemblyTypes(services) 26: .AsClosedTypesOf(typeof(ICommandHandler<>)) 27: .InstancePerApiRequest(); 28: builder.RegisterAssemblyTypes(services) 29: .AsClosedTypesOf(typeof(IValidationHandler<>)) 30: .InstancePerApiRequest(); 31: var container = builder.Build(); 32: // Set the WebApi dependency resolver. 33: var resolver = new AutofacWebApiDependencyResolver(container); 34: configuration.ServiceResolver.SetResolver(resolver); 35: } 36: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The RegisterApiControllers method will scan the given assembly and register the all ApiController classes. This method will look for types that derive from IHttpController with name convention end with “Controller”. The InstancePerApiRequest method specifies the life time of the component for once per API controller invocation. The GlobalConfiguration.Configuration provides a ServiceResolver class which can be use set dependency resolver for ASP.NET Web API. In our example, we are using AutofacWebApiDependencyResolver class provided by Autofac.WebApi to set the dependency resolver. The Run method of Bootstrapper class is calling from Application_Start method of Global.asax.cs. 1: protected void Application_Start() 2: { 3: AreaRegistration.RegisterAllAreas(); 4: RegisterGlobalFilters(GlobalFilters.Filters); 5: RegisterRoutes(RouteTable.Routes); 6: BundleTable.Bundles.RegisterTemplateBundles(); 7: //Call Autofac DI configurations 8: Bootstrapper.Run(); 9: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Autofac.Mvc4 The Autofac framework’s integration with ASP.NET MVC has updated for ASP.NET MVC 4. The NuGet package Autofac.Mvc4 provides the dependency injection support for ASP.NET MVC 4. There is not any syntax change between Autofac.Mvc3 and Autofac.Mvc4 Source Code I have updated my EFMVC app with Autofac.WebApi for applying dependency injection for it’s ASP.NET Web API services. EFMVC app also updated to Autofac.Mvc4 for it’s ASP.NET MVC 4 web app. The above code sample is taken from the EFMVC app. You can download the source code of EFMVC app from http://efmvc.codeplex.com/

  Read the article

• SQL Developer Database Diff – Compare Objects From Multiple Schemas

  - by thatjeffsmith

  Ever wonder why Database Diff isn’t called Schema Diff? One reason is because SQL Developer allows you select objects from more than one schema in the ‘Source’ connection for the compare. Simply use the ‘More’ dialog view and select as many tables from as many different schemas as you require Now, before you get around to testing this – as you should never believe what I say, trust but verify – two things you need to know: I’m using SQL Developer version 3.2 On the initial screen you need to use the ‘Maintain’ option Maintain tells SQL Developer to use the schema designation in the source connection to find the same corresponding object in the destination schema. Choose ‘maintain’ if you want to compare objects in the same schema in the destination but don’t have the user login for that schema. So after you’ve selected your databases, your diff preferences, and your objects – you’re ready to perform the compare and review your results. The DIFF Report Notice the highlighted text, SQL Developer is ‘maintaining’ the Schema context from the two databases. Short and sweet. That’s pretty much all there is to doing a compare with SQL Developer with multiple schemas involved. You may have noticed in some posts lately that my editor screenshots had a ‘green screen’ look and feel to them. What’s with the black background in your editors? In the SQL Developer preferences, you can set your editor color schemes. I started with the ‘Twilight’ scheme (team Jacob in case you’re wondering) and then customized it further by going with a default green font color. You could go pretty crazy in here, and I’m assuming 90% of you could care less and will just stick with the original. But for those of you who are particular about your IDE styling – go crazy! SQL Developer Editor Display Preferences

  Read the article

• SQLAuthority News – MS Access Database is the Way to Go – April 1st Humor

  - by pinaldave

  First of all, today is April 1- April Fool’s Day, so I have written this post for some light entertainment. My friend has just sent me an email about why a person should go for Access Database. For a short background, I used to be an MS Access user once (I will not call myself MS Access DBA), and I must say I had a good time with Database at that time. As time passed by, I moved from MS Access to SQL Server. Well, as for my friend’s email, his reasons considering MS Access usage really made me laugh. MS Access may have a few points where it totally makes sense to use it. However, in the email that I received, there was not a single reason which was valid.  In fact, I thought it is an April 1st joke- just delivered a little earlier. Let us see some of the reasons from that email. Thanks to Mahesh Bhesania for sending this email to me. MS Access comes with lots of free stuff, e.g. MS Excel MS Access is the most preferred desktop database system MS Access can import data from MS Excel and SQL Server MS Access provides a real time database MS Access has a free IDE-to-VB Script MS Access fits well in your hard drive I actually think that the above points are either incorrect beliefs of some users, or someone just wrote them to give some laughter with such inaccurate data. And, for the same reason I decided to browse the Internet and do some research on MS Access database to verify my thoughts. While searching on this subject, I found the following two interesting statements from the site: Microsoft Access Database, Why Choose It? Other software manufacturers are more likely to provide interfaces to MS Access than any other desktop database system Microsoft Access consulting rates are typically lower for Access consultants compared to Oracle or SQL Server consultants The second one is may be the worst reason for you to switch to MS Access if you are already an SQL Server consultant. With this cartoon, have you ever felt like you were one of these chickens at some point in time? I guess that the moment might have just happened before the minute we say “I guess we were on the same page?” Does this mean we are IN the same table, or ON the same table?! (I accept bad joke!) It is All Fools’ Day after all, so just laugh! If you have something funny but non-offensive to share, just  leave your comment here. Reference: Pinal Dave (http://blog.SQLAuthority.com), Cartoon source unknown. Filed under: Software Development, SQL, SQL Authority, SQL Humor, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: MS ACCESS

  Read the article

• WPF vs. WinForms - a Delphi programmer's perspective?

  - by Robert Oschler

  I have read most of the major threads on WPF vs. WinForms and I find myself stuck in the unfortunate ambivalence you can fall into when deciding between the tried and true previous tech (Winforms), and it's successor (WPF). I am a veteran Delphi programmer of many years that is finally making the jump to C#. My fellow Delphi programmers out there will understand that I am excited to know that Anders Hejlsberg, of Delphi fame, was the architect behind C#. I have a strong addiction to Delphi's VCL custom components, especially those involved in making multi-step Wizards and components that act as a container for child components. With that background, I am hoping that those of you that switched from Delphi to C# can help me with my WinForms vs. WPF decision for writing my initial applications. Note, I am very impatient when coding and things like full fledged auto-complete and proper debugger support can make or break a project for me, including being able to find readily available information on API features and calls and even more so, workarounds for bugs. The SO threads and comments in the early 2009 date range give me great concern over WPF when it comes to potential frustrations that could mar my C# UI development coding. On the other hand, spending an inordinate amount of time learning an API tech that is, even if it is not abandoned, soon to be replaced (WinForms), is equally troubling and I do find the GPU support in WPF tantalizing. Hence my ambivalence. Since I haven't learned either tech yet I have a rare opportunity to get a fresh start and not have to face the big "unlearning" curve I've seen people mention in various threads when a WinForms programmer makes the move to WPF. On the other hand, if using WPF will just be too frustrating or have other major negative consequences for an impatient RAD developer like myself, then I'll just stick with WinForms until WPF reaches the same level of support and ease of use. To give you a concrete example into my psychology as a programmer, I used VB and subsequently Delphi to completely avoid altogether the very real pain of coding with MFC, a Windows UI library that many developers suffered through while developing early Windows apps. I have never regretted my luck in avoiding MFC. It would also be comforting to know if Anders Hejlsberg had a hand in the architecture of WPF and/or WinForms, and if there are any disparities in the creative vision and ease of use embodied in either code base. Finally, for the Delphi programmers again, let me know how much "IDE schock" I'm in for when using WPF as opposed to WinForms, especially when it comes to debugger support. Any job market comments updated for 2011 would be appreciated too. -- roschler

  Read the article

• WPF vs. WinForms - a Delphi programmer's perspective?

  - by Robert Oschler

  Hello all. I have read most of the major threads on WPF vs. WinForms and I find myself stuck in the unfortunate ambivalence you can fall into when deciding between the tried and true previous tech (Winforms), and it's successor (WPF). I am a veteran Delphi programmer of many years that is finally making the jump to C#. My fellow Delphi programmers out there will understand that I am excited to know that Anders Hejlsberg, of Delphi fame, was the architect behind C#. I have a strong addiction to Delphi's VCL custom components, especially those involved in making multi-step Wizards and components that act as a container for child components. With that background, I am hoping that those of you that switched from Delphi to C# can help me with my WinForms vs. WPF decision for writing my initial applications. Note, I am very impatient when coding and things like full fledged auto-complete and proper debugger support can make or break a project for me, including being able to find readily available information on API features and calls and even more so, workarounds for bugs. The SO threads and comments in the early 2009 date range give me great concern over WPF when it comes to potential frustrations that could mar my C# UI development coding. On the other hand, spending an inordinate amount of time learning an API tech that is, even if it is not abandoned, soon to be replaced (WinForms), is equally troubling and I do find the GPU support in WPF tantalizing. Hence my ambivalence. Since I haven't learned either tech yet I have a rare opportunity to get a fresh start and not have to face the big "unlearning" curve I've seen people mention in various threads when a WinForms programmer makes the move to WPF. On the other hand, if using WPF will just be too frustrating or have other major negative consequences for an impatient RAD developer like myself, then I'll just stick with WinForms until WPF reaches the same level of support and ease of use. To give you a concrete example into my psychology as a programmer, I used VB and subsequently Delphi to completely avoid altogether the very real pain of coding with MFC, a Windows UI library that many developers suffered through while developing early Windows apps. I have never regretted my luck in avoiding MFC. It would also be comforting to know if Anders Hejlsberg had a hand in the architecture of WPF and/or WinForms, and if there are any disparities in the creative vision and ease of use embodied in either code base. Finally, for the Delphi programmers again, let me know how much "IDE schock" I'm in for when using WPF as opposed to WinForms, especially when it comes to debugger support. Any job market comments updated for 2011 would be appreciated too. -- roschler

  Read the article

• Pinning Projects and Solutions with Visual Studio 2010

  - by ScottGu

  This is the twenty-fourth in a series of blog posts I’m doing on the VS 2010 and .NET 4 release. Today’s blog post covers a very small, but still useful, feature of VS 2010 – the ability to “pin” projects and solutions to both the Windows 7 taskbar as well VS 2010 Start Page.  This makes it easier to quickly find and open projects in the IDE. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] VS 2010 Jump List on Windows 7 Taskbar Windows 7 added support for customizing the taskbar at the bottom of your screen.  You can “pin” and re-arrange your application icons on it however you want. Most developers using Visual Studio 2010 on Windows 7 probably already know that they can “pin” the Visual Studio icon to the Windows 7 taskbar – making it always present.  What you might not yet have discovered, though, is that Visual Studio 2010 also exposes a Taskbar “jump list” that you can use to quickly find and load your most recently used projects as well. To activate this, simply right-click on the VS 2010 icon in the task bar and you’ll see a list of your most recent projects.  Clicking one will load it within Visual Studio 2010: Pinning Projects on the VS 2010 Jump List with Windows 7 One nice feature also supported by VS 2010 is the ability to optionally “pin” projects to the jump-list as well – which makes them always listed at the top.  To enable this, simply hover over the project you want to pin and then click the “pin” icon that appears on the right of it: When you click the pin the project will be added to a new “Pinned” list at the top of the jumplist: This enables you to always display your own list of projects at the top of the list.  You can optionally click and drag them to display in any order you want. VS 2010 Start Page and Project Pinning VS 2010 has a new “start page” that displays by default each time you launch a new instance of Visual Studio.  In addition to displaying learning and help resources, it also includes a “Recent Projects” section that you can use to quickly load previous projects that you have recently worked on: The “Recent Projects” section of the start page also supports the concept of “pinning” a link to projects you want to always keep in the list – regardless of how recently they’ve been accessed. To “pin” a project to the list you simply select the “pin” icon that appears when you hover over an item within the list: Once you’ve pinned a project to the start page list it will always show up in it (at least until you “unpin” it). Summary This project pinning support is a small but nice usability improvement with VS 2010 and can make it easier to quickly find and load projects/solutions.  If you work with a lot of projects at the same time it offers a nice shortcut to load them. Hope this helps, Scott

  Read the article

• Hyperlinked, externalized source code documentation

  - by Dave Jarvis

  Why do we still embed natural language descriptions of source code (i.e., the reason why a line of code was written) within the source code, rather than as a separate document? Given the expansive real-estate afforded to modern development environments (high-resolution monitors, dual-monitors, etc.), an IDE could provide semi-lock-step panels wherein source code is visually separated from -- but intrinsically linked to -- its corresponding comments. For example, developers could write source code comments in a hyper-linked markup language (linking to additional software requirements), which would simultaneously prevent documentation from cluttering the source code. What shortcomings would inhibit such a software development mechanism? A mock-up to help clarify the question: When the cursor is at a particular line in the source code (shown with a blue background, above), the documentation that corresponds to the line at the cursor is highlighted (i.e., distinguished from the other details). As noted in the question, the documentation would stay in lock-step with the source code as the cursor jumps through the source code. A hot-key could switch between "documentation mode" and "development mode". Potential advantages include: More source code and more documentation on the screen(s) at once Ability to edit documentation independently of source code (regardless of language?) Write documentation and source code in parallel without merge conflicts Real-time hyperlinked documentation with superior text formatting Quasi-real-time machine translation into different natural languages Every line of code can be clearly linked to a task, business requirement, etc. Documentation could automatically timestamp when each line of code was written (metrics) Dynamic inclusion of architecture diagrams, images to explain relations, etc. Single-source documentation (e.g., tag code snippets for user manual inclusion). Note: The documentation window can be collapsed Workflow for viewing or comparing source files would not be affected How the implementation happens is a detail; the documentation could be: kept at the end of the source file; split into two files by convention (filename.c, filename.c.doc); or fully database-driven By hyperlinked documentation, I mean linking to external sources (such as StackOverflow or Wikipedia) and internal documents (i.e., a wiki on a subdomain that could cross-reference business requirements documentation) and other source files (similar to JavaDocs). Related thread: What's with the aversion to documentation in the industry?

  Read the article

• Integrating Oracle Forms Applications 11g Into SOA (4-6/Mai/10)

  - by Claudia Costa

  Workshop Description This is a Free workshop of 3 days is targeted at Oracle Forms professionals interested in integrating Oracle Forms into a Service Oriented Architecture. The workshop highlights how Forms can be part of a Service Oriented Architecture, how the Oracle Forms functionalities make it possible to integrate existing (or new) Forms applications with new or existing development utilizing the Service Oriented Architecture concepts. The goal is to understand the incremental approach that Forms provides to developers who need to extend their business platform to JEE, allowing Oracle Forms customers to retain their investment in Oracle Forms while leveraging the opportunities offered by complementing technologies. During the event the attendees will implement the Oracle Forms functionalities that make it possible to integrate with SOA. Register Now! Prerequisites ·         Knowledge of the Oracle Forms development environment (mandatory) ·         Basic knowledge of the Oracle database ·         Basic knowledge of the Java Programming Language ·         Basic knowledge of Oracle Jdeveloper or another Java IDE   System Requirements   This workshop requires attendees to provide their own laptops for this class. Attendee laptops must meet the following minimum hardware/software requirements:   ·         Laptop/PC with minimum 4 GB RAM ·         Oracle Database ·         Oracle Forms 11g R1 PS1 (WebLogic Server 10.1.3.2 + Portal, Forms, Reports and Discoverer ) ·         Oracle JDeveloper 11g R1 PS1 http://download.oracle.com/otn/java/jdeveloper/1112/jdevstudio11112install.exe ·         TCP-IP Loopback Adapter Installation (before the SOASuite installation) ·         Oracle SOASuite 11g R1 PS1 (without BAM component) When asked for an admin password, please use 'welcome1 http://download.oracle.com/otn/nt/middleware/11g/ofm_rcu_win_11.1.1.2.0_disk1_1of1.zip http://download.oracle.com/otn/nt/middleware/11g/ofm_soa_generic_11.1.1.2.0_disk1_1of1.zip ·         Oracle BI Publisher 10.1.3.4.1 http://download.oracle.com/otn/nt/ias/101341/bipublisher_windows_x86_101341.zip ·         Oracle BI Publisher Desktop 10.1.3.4. http://download.oracle.com/otn/nt/ias/101341/bipublisher_desktop_windows_x86_101341.zip   ·         At least 1 Oracle Forms solution already upgraded to the Oracle FMW 11g platform.   ------------------------------------------------------------------------------------------   Horário e Local:   4-6 de Maio / 9:30-18:00h Oracle, Porto Salvo Register Here Para mais informação por favor contacte: [email protected]

  Read the article

• Netbeans doesn't start, Java fatal error, unless sudo

  - by elect

  Fresh 13.10 64b Openjdk 6 is there, I just installed Netbeans 7.01 from the repo, but it doesn't work, I open then a console elect@elect-desktop:~$ netbeans # # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007faebdf79325, pid=5251, tid=140388628424448 # # JRE version: 6.0_27-b27 # Java VM: OpenJDK 64-Bit Server VM (20.0-b12 mixed mode linux-amd64 compressed oops) # Derivative: IcedTea6 1.12.6 # Distribution: Ubuntu Saucy Salamander (development branch), package 6b27-1.12.6-1ubuntu2 # Problematic frame: # C [libgobject-2.0.so.0+0x14325] g_cclosure_marshal_BOOLEAN__BOXED_BOXEDv+0x985 # # An error report file with more information is saved as: # /home/elect/hs_err_pid5251.log [thread 140386948781824 also had an error] # # If you would like to submit a bug report, please include # instructions how to reproduce the bug and visit: # https://bugs.launchpad.net/ubuntu/+source/openjdk-6/ # /usr/share/netbeans/7.0.1/bin/../platform/lib/nbexec: line 548: 5251 Aborted (core dumped) "/usr/lib/jvm/java-6-openjdk-amd64/bin/java" -Djdk.home="/usr/lib/jvm/java-6-openjdk-amd64" -Djava.library.path=/usr/lib/jni -classpath "/usr/share/netbeans/7.0.1/platform/lib/boot.jar:/usr/share/netbeans/7.0.1/platform/lib/org-openide-modules.jar:/usr/share/netbeans/7.0.1/platform/lib/org-openide-util.jar:/usr/share/netbeans/7.0.1/platform/lib/org-openide-util-lookup.jar:/usr/lib/jvm/java-6-openjdk-amd64/lib/dt.jar:/usr/lib/jvm/java-6-openjdk-amd64/lib/tools.jar" -Dnetbeans.system_http_proxy="DIRECT" -Dnetbeans.system_http_non_proxy_hosts="" -Dnetbeans.dirs="/usr/share/netbeans/7.0.1/nb:/usr/share/netbeans/7.0.1/bin/../ergonomics:/usr/share/netbeans/7.0.1/ide:/usr/share/netbeans/7.0.1/java:/usr/share/netbeans/7.0.1/bin/../xml:/usr/share/netbeans/7.0.1/apisupport:/usr/share/netbeans/7.0.1/bin/../webcommon:/usr/share/netbeans/7.0.1/bin/../websvccommon:/usr/share/netbeans/7.0.1/bin/../enterprise:/usr/share/netbeans/7.0.1/bin/../mobility:/usr/share/netbeans/7.0.1/bin/../profiler:/usr/share/netbeans/7.0.1/bin/../ruby:/usr/share/netbeans/7.0.1/bin/../python:/usr/share/netbeans/7.0.1/bin/../php:/usr/share/netbeans/7.0.1/bin/../visualweb:/usr/share/netbeans/7.0.1/bin/../soa:/usr/share/netbeans/7.0.1/bin/../identity:/usr/share/netbeans/7.0.1/bin/../uml:/usr/share/netbeans/7.0.1/harness:/usr/share/netbeans/7.0.1/bin/../cnd:/usr/share/netbeans/7.0.1/bin/../dlight:/usr/share/netbeans/7.0.1/bin/../groovy:/usr/share/netbeans/7.0.1/bin/../extra:/usr/share/netbeans/7.0.1/bin/../javafx:/usr/share/netbeans/7.0.1/bin/../javacard:" -Dnetbeans.home="/usr/share/netbeans/7.0.1/platform" '-Dnetbeans.importclass=org.netbeans.upgrade.AutoUpgrade' '-Dnetbeans.accept_license_class=org.netbeans.license.AcceptLicense' '-XX:MaxPermSize=384m' '-Xmx768m' '-client' '-Xss2m' '-Xms32m' '-XX:PermSize=32m' '-Dapple.laf.useScreenMenuBar=true' '-Dapple.awt.graphics.UseQuartz=true' '-Dsun.java2d.noddraw=true' '-Dsun.java2d.pmoffscreen=false' -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath="/home/elect/.netbeans/7.0/var/log/heapdump.hprof" org.netbeans.Main --userdir "/home/elect/.netbeans/7.0" "--branding" "nb" 0<&0 Looking around, the second answer, here Vigintas Labakojis, points out something regarding permission, I just try sudo netbeans, it works.. Then I look for the ~/.cache/netbeans/ I dont have, I have instead ~/.netbeans/ Then I run his commands on those folder, it doesn't work.. It must be something else, do you have any idea? In any case, my log /home/elect/hs_err_pid5251.log is here

  Read the article

• Virtual Box - How to open a .VDI Virtual Machine

  - by [email protected]

   How to open a .VDI Virtual MachineSometimes someone share with us one Virtual machine with extension .VDI, after that we can wonder how and what with?Well the answer is... It is a VirtualBox - Virtual Machine. If you have not downloaded it you can do this easily just follow this post.http://listeningoracle.blogspot.com/2010/04/que-es-virtualbox.htmlor http://oracleoforacle.wordpress.com/2010/04/14/ques-es-virtualbox/Ok, Now with VirtualBox Installed open it and proceed with the following:1. Open the Virtual File Manager. 2. Click on Actions ? Add and select the .VDI file Click "Ok"3. Now we can register the new Virtual Machine - Click New, and Click Next4. Write down a Name for the virtual Machine a proceed to select a Operating System and Version. (In this case it is a Linux (Oracle Enterprise Linux or RedHat)Click Next5. Select the memory amount base for the Virtual Machine (Minimal 1280 for our case) - Click Next6. Select the Disk 11GR2_OEL5_32GB.vdi it was added in the virtual media manager in the step 2. Dont forget let selected Boot hard Disk (Primary Master) . Given it is the only disk assigned to the virtual machine.Click Next7. Click Finish8. This step is important. Once you have click on the settings Button.9. On General option click the advanced settings. Here you must change the default directory to save your Snapshots; my recommendation set it to the same directory where the .Vdi file is. Otherwise you can have the same Virtual Machine and its snapshots in different paths.10. Now Click on System, and proceed to assign the correct memory (If you did not before) Note: Enable "Enable IO APIC" if you are planning to assign more than one CPU to the Virtual Machine.Define the processors for the Virtual machine. If you processor is dual core choose 211. Select the video memory amount you want to assign to the Virtual Machine 12. Associated more storage disk to the Virtual machine, if you have more VDI files. (Not our case)The disk must be selected as IDE Primary Master. 13. Well you can verify the other options, but with these changes you will be able to start the VM.Note: Sometime the VM owner may share some instructions, if so follow his instructions.14. Finally Start the Virtual Machine (Click > Start)

  Read the article

• Built-in card-reader doesn't work. HP Compaq nx6325 notebook

  - by user10940

  I have a HP-Compaq nx6325 notebook with an built-in card-reader (SD, MS/Pro, MMC, SM, XD) and the ubuntu (10.10.) don't see it. I've tried to install it manually, with this steps (and with this tifmxx driver), but doesn't work. The compile log: $ echo /home/tvera/downloads/cr_install /home/tvera/downloads/cr_install $ make -C /lib/modules/2.6.35-25-generic/build M=/home/tvera/downloads/cr_install make[1]: Entering directory `/usr/src/linux-headers-2.6.35-25-generic' CC [M] /home/tvera/downloads/cr_install/tifm_core.o In file included from /home/tvera/downloads/cr_install/tifm_core.c:12: /home/tvera/downloads/cr_install/linux/tifm.h:128: error: field ‘cdev’ has incomplete type /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_uevent’: /home/tvera/downloads/cr_install/tifm_core.c:69: warning: passing argument 1 of ‘add_uevent_var’ from incompatible pointer type include/linux/kobject.h:244: note: expected ‘struct kobj_uevent_env *’ but argument is of type ‘char **’ /home/tvera/downloads/cr_install/tifm_core.c:69: warning: passing argument 2 of ‘add_uevent_var’ makes pointer from integer without a cast include/linux/kobject.h:244: note: expected ‘const char *’ but argument is of type ‘int’ /home/tvera/downloads/cr_install/tifm_core.c: At top level: /home/tvera/downloads/cr_install/tifm_core.c:161: warning: initialization from incompatible pointer type /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_free’: /home/tvera/downloads/cr_install/tifm_core.c:170: warning: type defaults to ‘int’ in declaration of ‘__mptr’ /home/tvera/downloads/cr_install/tifm_core.c:170: warning: initialization from incompatible pointer type /home/tvera/downloads/cr_install/tifm_core.c: At top level: /home/tvera/downloads/cr_install/tifm_core.c:177: error: unknown field ‘release’ specified in initializer /home/tvera/downloads/cr_install/tifm_core.c:178: warning: initialization from incompatible pointer type /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_alloc_adapter’: /home/tvera/downloads/cr_install/tifm_core.c:190: error: implicit declaration of function ‘class_device_initialize’ /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_add_adapter’: /home/tvera/downloads/cr_install/tifm_core.c:211: error: ‘BUS_ID_SIZE’ undeclared (first use in this function) /home/tvera/downloads/cr_install/tifm_core.c:211: error: (Each undeclared identifier is reported only once /home/tvera/downloads/cr_install/tifm_core.c:211: error: for each function it appears in.) /home/tvera/downloads/cr_install/tifm_core.c:212: error: implicit declaration of function ‘class_device_add’ /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_remove_adapter’: /home/tvera/downloads/cr_install/tifm_core.c:237: error: implicit declaration of function ‘class_device_del’ /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_free_adapter’: /home/tvera/downloads/cr_install/tifm_core.c:243: error: implicit declaration of function ‘class_device_put’ /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_alloc_device’: /home/tvera/downloads/cr_install/tifm_core.c:275: error: ‘struct device’ has no member named ‘bus_id’ /home/tvera/downloads/cr_install/tifm_core.c:275: error: ‘BUS_ID_SIZE’ undeclared (first use in this function) make[2]: *** [/home/tvera/downloads/cr_install/tifm_core.o] Error 1 make[1]: *** [_module_/home/tvera/downloads/cr_install] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-25-generic' make: *** [all] Error 2 The output of lsusb: Bus 001 Device 005: ID 05e3:0702 Genesys Logic, Inc. USB 2.0 IDE Adapter Bus 003 Device 003: ID 0458:003a KYE Systems Corp. (Mouse Systems) NetScroll+ Mini Traveler Bus 003 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• How Can I Test My Computer’s Power Supply?

  - by Jason Fitzpatrick

  You’re concerned your computer troubles stem from a failing (or outright fried) power supply unit. How can you test the unit to be sure that it’s the source of your hardware headaches? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader Sam Hoice has some PSU concerns: My computer powered off the other day on its own, and now when I push the power button, nothing happens. My assumption would naturally be that the power supply is done (possibly well done) but is there any good way to test this before I buy a new one? How can Sam test things without damaging his current computer or other hardware?   The Answer SuperUser contributor Grant writes: Unplug the power supply from any of the components inside the computer (or just remove it from the computer completely). USE CAUTION HERE (Though you’d only be shocked with a max of 24 volts) Plug the power supply into the wall. Find the big 24-ish pin connector that connects to the motherboard. Connect the GREEN wire with the adjacent BLACK wire. The power supply’s fan should start up. If it doesn’t then it’s dead. If the fan starts up, then it could be the motherboard that’s dead. You can use a multimeter to check if there is power output from the power supply. Adrien offers a solution for readers who may not be comfortable jamming wires into their power supply unit’s MOBO connector: Most well-stocked geek-stores sell a “power-supply tester” that has all the appropriate connectors to plug each part of your PSU into, with spiffy LEDs indicating status of the various rails, connectors for IDE/SATA/floppy power cables, etc. They run ~$20 US. With a little careful shopping you can even find a highly-rated PSU tester for a measly $6. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

  Read the article

• Nginx and PHP Fundamentals

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/08/01/nginx-and-php-fundamentals.aspxHot on the heels of my .NET caching course, I’ve had my first “fundamentals” course released on Pluralsight: Nginx and PHP Fundamentals. It’s a practical look at two of the biggest technologies on the web – Nginx, which is the fastest growing HTTP server around (currently hosting 100+ million sites), and PHP, which powers more websites than any other server-side framework (currently 240+ million sites). The two technologies work well together, both are open-source and cross-platform and both are lightweight and easy to get started with - you just need to download and unzip the runtimes, and with a text editor you can create and host dynamic websites. I’ve used PHP as a second (sometimes third) language since 2005 when I was brought cold into an established codebase to help improve performance, and Nginx to host tier 2 apps for the last couple of years. As with any training course, you learn new things as you produce it, and it was good to focus on a different stack from my commercial .NET world. In the course I start with a website in two parts – one which is just static content, and one which processes a user registration form using ASP.NET MVC, both running in IIS. Over four modules I migrate the app to Nginx and PHP: Hosting Static Content in Nginx – how to deploy and configure Nginx for a basic website; PHP Part 1: Basic Web Forms – installing PHP and an IDE, and building a simple form with server-side validation; PHP Part 2: Packages and Integration – using PECL and Composer for packages to connect to Azure, AWS, Mongo and reCAPTCHA; Hosting PHP in Nginx – configuring Nginx to host our PHP site. Along the way I run some performance stats with JMeter, and the headlines are that Nginx running on Linux outperforms IIS on Windows for static content,by 800 requests per second over 1000 concurrent requests; and Linux+Ngnix+PHP outperforms Windows+IIS+ASP.NET MVC by 700 request per second with the same load. Of course, the headline stats don’t tell the whole story, and when you add OpCode caching for PHP and the ASP.NET Output Cache, the results are very different. As Web architecture moves away from heavy server-side processing, to Single Page Apps with client-side frameworks like AngularJS and Knockout, I think there’s an increasing need for high-performance, low-cost server technologies, and the combination of Nginx and PHP makes a compelling case.

  Read the article

• New Validation Attributes in ASP.NET MVC 3 Future

  - by imran_ku07

       Introduction:             Validating user inputs is an very important step in collecting information from users because it helps you to prevent errors during processing data. Incomplete or improperly formatted user inputs will create lot of problems for your application. Fortunately, ASP.NET MVC 3 makes it very easy to validate most common input validations. ASP.NET MVC 3 includes Required, StringLength, Range, RegularExpression, Compare and Remote validation attributes for common input validation scenarios. These validation attributes validates most of your user inputs but still validation for Email, File Extension, Credit Card, URL, etc are missing. Fortunately, some of these validation attributes are available in ASP.NET MVC 3 Future. In this article, I will show you how to leverage Email, Url, CreditCard and FileExtensions validation attributes(which are available in ASP.NET MVC 3 Future) in ASP.NET MVC 3 application.       Description:             First of all you need to download ASP.NET MVC 3 RTM Source Code from here. Then extract all files in a folder. Then open MvcFutures project from mvc3-rtm-sources\mvc3\src\MvcFutures folder. Build the project. In case, if you get compile time error(s) then simply remove the reference of System.Web.WebPages and System.Web.Mvc assemblies and add the reference of System.Web.WebPages and System.Web.Mvc 3 assemblies again but from the .NET tab and then build the project again, it will create a Microsoft.Web.Mvc assembly inside mvc3-rtm-sources\mvc3\src\MvcFutures\obj\Debug folder. Now we can use Microsoft.Web.Mvc assembly inside our application.             Create a new ASP.NET MVC 3 application. For demonstration purpose, I will create a dummy model UserInformation. So create a new class file UserInformation.cs inside Model folder and add the following code,   public class UserInformation { [Required] public string Name { get; set; } [Required] [EmailAddress] public string Email { get; set; } [Required] [Url] public string Website { get; set; } [Required] [CreditCard] public string CreditCard { get; set; } [Required] [FileExtensions(Extensions = "jpg,jpeg")] public string Image { get; set; } }             Inside UserInformation class, I am using Email, Url, CreditCard and FileExtensions validation attributes which are defined in Microsoft.Web.Mvc assembly. By default FileExtensionsAttribute allows png, jpg, jpeg and gif extensions. You can override this by using Extensions property of FileExtensionsAttribute class.             Then just open(or create) HomeController.cs file and add the following code,   public class HomeController : Controller { public ActionResult Index() { return View(); } [HttpPost] public ActionResult Index(UserInformation u) { return View(); } }             Next just open(or create) Index view for Home controller and add the following code,  @model NewValidationAttributesinASPNETMVC3Future.Model.UserInformation @{ ViewBag.Title = "Index"; Layout = "~/Views/Shared/_Layout.cshtml"; } <h2>Index</h2> <script src="@Url.Content("~/Scripts/jquery.validate.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery.validate.unobtrusive.min.js")" type="text/javascript"></script> @using (Html.BeginForm()) { @Html.ValidationSummary(true) <fieldset> <legend>UserInformation</legend> <div class="editor-label"> @Html.LabelFor(model => model.Name) </div> <div class="editor-field"> @Html.EditorFor(model => model.Name) @Html.ValidationMessageFor(model => model.Name) </div> <div class="editor-label"> @Html.LabelFor(model => model.Email) </div> <div class="editor-field"> @Html.EditorFor(model => model.Email) @Html.ValidationMessageFor(model => model.Email) </div> <div class="editor-label"> @Html.LabelFor(model => model.Website) </div> <div class="editor-field"> @Html.EditorFor(model => model.Website) @Html.ValidationMessageFor(model => model.Website) </div> <div class="editor-label"> @Html.LabelFor(model => model.CreditCard) </div> <div class="editor-field"> @Html.EditorFor(model => model.CreditCard) @Html.ValidationMessageFor(model => model.CreditCard) </div> <div class="editor-label"> @Html.LabelFor(model => model.Image) </div> <div class="editor-field"> @Html.EditorFor(model => model.Image) @Html.ValidationMessageFor(model => model.Image) </div> <p> <input type="submit" value="Save" /> </p> </fieldset> } <div> @Html.ActionLink("Back to List", "Index") </div>             Now just run your application. You will find that both client side and server side validation for the above validation attributes works smoothly.                      Summary:             Email, URL, Credit Card and File Extension input validations are very common. In this article, I showed you how you can validate these input validations into your application. I explained this with an example. I am also attaching a sample application which also includes Microsoft.Web.Mvc.dll. So you can add a reference of Microsoft.Web.Mvc assembly directly instead of doing any manual work. Hope you will enjoy this article too.   SyntaxHighlighter.all()

  Read the article

• A pseudo-listener for AlwaysOn Availability Groups for SQL Server virtual machines running in Azure

  - by MikeD

  I am involved in a project that is implementing SharePoint 2013 on virtual machines hosted in Azure. The back end data tier consists of two Azure VMs running SQL Server 2012, with the SharePoint databases contained in an AlwaysOn Availability Group. I used this "Tutorial: AlwaysOn Availability Groups in Windows Azure (GUI)" to help me implement this setup.Because Azure DHCP will not assign multiple unique IP addresses to the same VM, having an AG Listener in Azure is not currently supported.  I wanted to figure out another mechanism to support a "pseudo listener" of some sort. First, I created a CNAME (alias) record in the DNS zone with a short TTL (time to live) of 5 minutes (I may yet make this even shorter). The record represents a logical name (let's say the alias is SPSQL) of the server to connect to for the databases in the availability group (AG). When Server1 was hosting the primary replica of the AG, I would set the CNAME of SPSQL to be SERVER1. When the AG failed over to Server1, I wanted to set the CNAME to SERVER2. Seemed simple enough.(It's important to point out that the connection strings for my SharePoint services should use the CNAME alias, and not the actual server name. This whole thing falls apart otherwise.)To accomplish this, I created identical SQL Agent Jobs on Server1 and Server2, with two steps:1. Step 1: Determine if this server is hosting the primary replica.This is a TSQL step using this script:declare @agName sysname = 'AGTest'set nocount on declare @primaryReplica sysnameselect @primaryReplica = agState.primary_replicafrom sys.dm_hadr_availability_group_states agState   join sys.availability_groups ag on agstate.group_id = ag.group_id   where ag.name = @AGname if not exists(   select *    from sys.dm_hadr_availability_group_states agState   join sys.availability_groups ag on agstate.group_id = ag.group_id   where @@Servername = agstate.primary_replica    and ag.name = @AGname)begin   raiserror ('Primary replica of %s is not hosted on %s, it is hosted on %s',17,1,@Agname, @@Servername, @primaryReplica) endThis script determines if the primary replica value of the AG group is the same as the server name, which means that our server is hosting the current AG (you should update the value of the @AgName variable to the name of your AG). If this is true, I want the DNS alias to point to this server. If the current server is not hosting the primary replica, then the script raises an error. Also, if the script can't be executed because it cannot connect to the server, that also will generate an error. For the job step settings, I set the On Failure option to "Quit the job reporting success". The next step in the job will set the DNS alias to this server name, and I only want to do that if I know that it is the current primary replica, otherwise I don't want to do anything. I also include the step output in the job history so I can see the error message.Job Step 2: Update the CNAME entry in DNS with this server's name.I used a PowerShell script to accomplish this:$cname = "SPSQL.contoso.com"$query = "Select * from MicrosoftDNS_CNAMEType"$dns1 = "dc01.contoso.com"$dns2 = "dc02.contoso.com"if ((Test-Connection -ComputerName $dns1 -Count 1 -Quiet) -eq $true){    $dnsServer = $dns1}elseif ((Test-Connection -ComputerName $dns2 -Count 1 -Quiet) -eq $true) {   $dnsServer = $dns2}else{  $msg = "Unable to connect to DNS servers: " + $dns1 + ", " + $dns2   Throw $msg}$record = Get-WmiObject -Namespace "root\microsoftdns" -Query $query -ComputerName $dnsServer  | ? { $_.Ownername -match $cname }$thisServer = [System.Net.Dns]::GetHostEntry("LocalHost").HostName + "."$currentServer = $record.RecordData if ($currentServer -eq $thisServer ) {     $cname + " CNAME is up to date: " + $currentServer}else{    $cname + " CNAME is being updated to " + $thisServer + ". It was " + $currentServer    $record.RecordData = $thisServer    $record.put()}This script does a few things:finds a responsive domain controller (Test-Connection does a ping and returns a Boolean value if you specify the -Quiet parameter)makes a WMI call to the domain controller to get the current CNAME record value (Get-WmiObject)gets the FQDN of this server (GetHostEntry)checks if the CNAME record is correct and updates it if necessary(You should update the values of the variables $cname, $dns1 and $dns2 for your environment.)Since my domain controllers are also hosted in Azure VMs, either one of them could be down at any point in time, so I need to find a DC that is responsive before attempting the DNS call. The other little thing here is that the CNAME record contains the FQDN of a machine, plus it ends with a period. So the comparison of the CNAME record has to take the trailing period into account. When I tested this step, I was getting ACCESS DENIED responses from PowerShell for the Get-WmiObject cmdlet that does a remote lookup on the DC. This occurred because the SQL Agent service account was not a member of the Domain Admins group, so I decided to create a SQL Credential to store the credentials for a domain administrator account and use it as a PowerShell proxy (rather than give the service account Domain Admins membership).In SQL Management Studio, right click on the Credentials node (under the server's Security node), and choose New Credential...Then, under SQL Agent-->Proxies, right click on the PowerShell node and choose New Proxy...Finally, in the job step properties for the PowerShell step, select the new proxy in the Run As drop down.I created this two step Job on both nodes of the Availability Group, but if you had more than two nodes, just create the same job on all the servers. I set the schedule for the job to execute every minute.When the server that is hosting the primary replica is running the job, the job history looks like this:The job history on the secondary server looks like this: When a failover occurs, the SQL Agent job on the new primary replica will detect that the CNAME needs to be updated within a minute. Based on the TTL of the CNAME (which I said at the beginning was 5 minutes), the SharePoint servers will get the new alias within five minutes and should be able to reconnect. I may want to shorten up the TTL to reduce the time it takes for the client connections to use the new alias. Using a DNS CNAME and a SQL Agent Job on all servers hosting AG replicas, I was able to create a pseudo-listener to automatically change the name of the server that was hosting the primary replica, for a scenario where I cannot use a regular AG listener (in this case, because the servers are all hosted in Azure).    

  Read the article

• Java Space on Parleys

  - by Yolande Poirier

  Now available! A great selection of JavaOne 2010 and JVM Language Summit 2010 sessions as well as Oracle Technology Network TechCasts on the new Java Space on Parleys website. Oracle partnered with Stephan Janssen, founder of Parleys to make this happen. Parleys website offers a user friendly experience to view online content. You can download some of the talks to your desktop or watch them on the go on mobile devices. The current selection is a well of expertise from top Java luminaries and Oracle experts. JavaOne 2010 sessions: ·        Best practices for signing code by Sean Mullan   ·        Building software using rich client platforms by Rickard Thulin ·        Developing beyond the component libraries by Ryan Cuprak ·        Java API for keyhole markup language by Florian Bachmann ·        Avoiding common user experience anti-patterns by Burk Hufnagel ·        Accelerating Java workloads via GPUs by Gary Frost JVM Languages Summit 2010 sessions: ·      Mixed language project compilation in Eclipse by Andy Clement  ·      Gathering the threads by John Rose  ·      LINQ: language features for concurrency by Neal Gafter  ·      Improvements in OpenJDK useful for JVM languages by Eric Caspole  ·      Symmetric Multilanguage - VM Architecture by Oleg Pliss  Special interviews with Oracle experts on product innovations: ·      Ludovic Champenois, Java EE architect on Glassfish 3.1 and Java EE. ·      John Jullion-Ceccarelli and Martin Ryzl on NetBeans IDE 6.9 You can chose to listen to a section of talks using the agenda view and search for related content while watching a presentation.  Enjoy the Java content and vote on it! 

  Read the article

• Gnome Do not Launching

  - by PyRulez

  When I try running gnome do, I get this. chris@Chris-Ubuntu-Laptop:~$ gnome-do pgrep: invalid user name: -u and it is not writable Trying sudo: chris@Chris-Ubuntu-Laptop:~$ sudo gnome-do [NetworkService] Could not initialize Network Manager dbus: Unable to open the session message bus. [Error 17:54:30.122] [SystemService] Could not initialize dbus: Unable to open the session message bus. (Do:2401): Wnck-CRITICAL **: wnck_set_client_type got called multiple times. (Do:2401): libdo-WARNING **: Binding '<Super>space' failed! [Error 17:54:30.649] [AbstractKeyBindingService] Key "" is already mapped. Tomboy.NotesItemSource "Tomboy Notes" encountered an error in UpdateItems: System.TypeInitializationException: An exception was thrown by the type initializer for Tomboy.TomboyDBus ---> System.Exception: Unable to open the session message bus. ---> System.ArgumentNullException: Argument cannot be null. Parameter name: address at NDesk.DBus.Bus.Open (System.String address) [0x00000] in <filename unknown>:0 at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 at Tomboy.TomboyDBus..cctor () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at Tomboy.NotesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Firefox.PlacesItemSource "Firefox Places" encountered an error in UpdateItems: System.InvalidCastException: Cannot cast from source type to destination type. at Mono.Data.Sqlite.SqliteDataReader.VerifyType (Int32 i, DbType typ) [0x00000] in <filename unknown>:0 at Mono.Data.Sqlite.SqliteDataReader.GetString (Int32 i) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource+<LoadPlaceItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem].AddEnumerable (IEnumerable`1 enumerable) [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem]..ctor (IEnumerable`1 collection) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.ToArray[PlaceItem] (IEnumerable`1 source) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Do.Universe.Linux.GNOMESpecialLocationsItemSource "GNOME Special Locations" encountered an error in UpdateItems: System.IO.FileNotFoundException: Could not find file "/root/.gtk-bookmarks". File name: '/root/.gtk-bookmarks' at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean anonymous, FileOptions options) [0x00000] in <filename unknown>:0 at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.FileStream:.ctor (string,System.IO.FileMode,System.IO.FileAccess,System.IO.FileShare) at System.IO.File.OpenRead (System.String path) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path, System.Text.Encoding encoding, Boolean detectEncodingFromByteOrderMarks, Int32 bufferSize) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.StreamReader:.ctor (string) at Do.Universe.Linux.GNOMESpecialLocationsItemSource+<ReadBookmarkItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at Do.Universe.Linux.GNOMESpecialLocationsItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . ^[^\Full thread dump: "<unnamed thread>" tid=0x0xb7570700 this=0x0x56f18 thread handle 0x403 state : not waiting owns () at (wrapper managed-to-native) Mono.Unix.Native.Syscall.read (int,intptr,ulong) <0xffffffff> at Mono.Unix.Native.Syscall.read (int,void*,ulong) <0x00023> at Mono.Unix.UnixStream.Read (byte[],int,int) <0x0008b> at NDesk.DBus.Connection.ReadMessage () <0x0003c> at NDesk.DBus.Connection.Iterate () <0x0001b> at NDesk.DBus.BusG/<Init>c__AnonStorey0.<>m__0 (intptr,NDesk.GLib.IOCondition,intptr) <0x00033> at (wrapper native-to-managed) NDesk.DBus.BusG/<Init>c__AnonStorey0.<>m__0 (intptr,NDesk.GLib.IOCondition,intptr) <0xffffffff> at (wrapper managed-to-native) Gtk.Clipboard.gtk_clipboard_wait_is_text_available (intptr) <0xffffffff> at Gtk.Clipboard.WaitIsTextAvailable () <0x00017> at Do.Universe.SelectedTextItem.UpdateSelection (object,System.EventArgs) <0x00027> at Do.Platform.AbstractApplicationService.OnSummoned () <0x00025> at Do.Platform.ApplicationService.<ApplicationService>m__31 (object,System.EventArgs) <0x00013> at Do.Core.Controller.OnSummoned () <0x00025> at Do.Core.Controller.Summon () <0x00027> at Do.Do.Main (string[]) <0x001eb> at (wrapper runtime-invoke) <Module>.runtime_invoke_void_object (object,intptr,intptr,intptr) <0xffffffff> "<unnamed thread>" tid=0x0xb2c81b40 this=0x0x194150 thread handle 0x412 state : interrupted state owns () at (wrapper managed-to-native) System.IO.InotifyWatcher.ReadFromFD (intptr,byte[],intptr) <0xffffffff> at System.IO.InotifyWatcher.Monitor () <0x0005f> at System.Threading.Thread.StartInternal () <0x00057> at (wrapper runtime-invoke) object.runtime_invoke_void__this__ (object,intptr,intptr,intptr) <0xffffffff> "Universe Update Dispatcher" tid=0x0xb29ffb40 this=0x0x569d8 thread handle 0x41b state : interrupted state owns () at (wrapper managed-to-native) System.Threading.WaitHandle.WaitOne_internal (System.Threading.WaitHandle,intptr,int,bool) <0xffffffff> at System.Threading.WaitHandle.WaitOne (System.TimeSpan,bool) <0x00133> at System.Threading.WaitHandle.WaitOne (System.TimeSpan) <0x00022> at Do.Core.UniverseManager.UniverseUpdateLoop () <0x0007a> at System.Threading.Thread.StartInternal () <0x00057> at (wrapper runtime-invoke) object.runtime_invoke_void__this__ (object,intptr,intptr,intptr) <0xffffffff> Tomboy.NotesItemSource "Tomboy Notes" encountered an error in UpdateItems: System.TypeInitializationException: An exception was thrown by the type initializer for Tomboy.TomboyDBus ---> System.Exception: Unable to open the session message bus. ---> System.ArgumentNullException: Argument cannot be null. Parameter name: address at NDesk.DBus.Bus.Open (System.String address) [0x00000] in <filename unknown>:0 at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 at Tomboy.TomboyDBus..cctor () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at Tomboy.NotesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Firefox.PlacesItemSource "Firefox Places" encountered an error in UpdateItems: System.InvalidCastException: Cannot cast from source type to destination type. at Mono.Data.Sqlite.SqliteDataReader.VerifyType (Int32 i, DbType typ) [0x00000] in <filename unknown>:0 at Mono.Data.Sqlite.SqliteDataReader.GetString (Int32 i) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource+<LoadPlaceItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem].AddEnumerable (IEnumerable`1 enumerable) [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem]..ctor (IEnumerable`1 collection) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.ToArray[PlaceItem] (IEnumerable`1 source) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Do.Universe.Linux.GNOMESpecialLocationsItemSource "GNOME Special Locations" encountered an error in UpdateItems: System.IO.FileNotFoundException: Could not find file "/root/.gtk-bookmarks". File name: '/root/.gtk-bookmarks' at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean anonymous, FileOptions options) [0x00000] in <filename unknown>:0 at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.FileStream:.ctor (string,System.IO.FileMode,System.IO.FileAccess,System.IO.FileShare) at System.IO.File.OpenRead (System.String path) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path, System.Text.Encoding encoding, Boolean detectEncodingFromByteOrderMarks, Int32 bufferSize) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.StreamReader:.ctor (string) at Do.Universe.Linux.GNOMESpecialLocationsItemSource+<ReadBookmarkItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at Do.Universe.Linux.GNOMESpecialLocationsItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . It stops when I try my key combination, ctrl-alt-. It does not pop up though.

  Read the article

• Code refactoring with Visual Studio 2010 Part-1

  - by Jalpesh P. Vadgama

  Visual studio 2010 is a Great IDE(Integrated Development Environment) and we all are using it in day by day for our coding purpose. There are many great features provided by Visual Studio 2010 and Today I am going to show one of great feature called for code refactoring. This feature is one of the most unappreciated features of Visual Studio 2010 as lots of people still not using that and doing stuff manfully. So to explain feature let’s create a simple console application which will print first name and last name like following. And following is code for that. using System; namespace CodeRefractoring { class Program { static void Main(string[] args) { string firstName = "Jalpesh"; string lastName = "Vadgama"; Console.WriteLine(string.Format("FirstName:{0}",firstName)); Console.WriteLine(string.Format("LastName:{0}", lastName)); Console.ReadLine(); } } } So as you can see this is a very basic console application and let’s run it to see output. So now lets explore our first feature called extract method in visual studio you can also do that via refractor menu like following. Just select the code for which you want to extract method and then click refractor menu and then click extract method. Now I am selecting three lines of code and clicking on refactor –> Extract Method just like following. Once you click menu a dialog box will appear like following. As you can I have highlighted two thing first is Method Name where I put Print as Method Name and another one Preview method signature where its smart enough to extract parameter also as We have just selected three lines with  console.writeline.  One you click ok it will extract the method and you code will be like this. using System; namespace CodeRefractoring { class Program { static void Main(string[] args) { string firstName = "Jalpesh"; string lastName = "Vadgama"; Print(firstName, lastName); } private static void Print(string firstName, string lastName) { Console.WriteLine(string.Format("FirstName:{0}", firstName)); Console.WriteLine(string.Format("LastName:{0}", lastName)); Console.ReadLine(); } } } So as you can see in above code its has created a static method called Print and also passed parameter for as firstname and lastname. Isn’t that great!!!. It has also created static print method as I am calling it from static void main.  Hope you liked it.. Stay tuned for more..Till that Happy programming.

  Read the article

• Eclipse Crashes on Ubuntu 11.10

  - by Adrian Matteo

  I'm using Eclipse Indigo with aptana, to develope a rails application and it was working fine, but now it keeps crashing on startup. It opens and when the loading bars appear on the status bar, it goes gray (not responding) and the in closes without an error. Here is the output from the terminal when I ran it from there: (Eclipse:7391): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (Eclipse:7391): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (Eclipse:7391): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (Eclipse:7391): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", 2012-05-27 16:05:58.272::INFO: Logging to STDERR via org.mortbay.log.StdErrLog 2012-05-27 16:06:00.586::INFO: jetty-6.1.11 2012-05-27 16:06:00.743::INFO: Started [email protected]:8500 2012-05-27 16:06:00.744::INFO: Started [email protected]:8600 2012-05-27 16:06:01.999::INFO: jetty-6.1.11 2012-05-27 16:06:01.029::INFO: Opened /tmp/jetty_preview_server.log 2012-05-27 16:06:01.046::INFO: Started [email protected]:8000 2012-05-27 16:06:01.071::INFO: jetty-6.1.11 2012-05-27 16:06:01.016::INFO: Started [email protected]:8300 ** (Eclipse:7391): DEBUG: NP_Initialize ** (Eclipse:7391): DEBUG: NP_Initialize succeeded No bp log location saved, using default. [000:000] Browser XEmbed support present: 1 [000:000] Browser toolkit is Gtk2. [000:001] Using Gtk2 toolkit ERROR: Invalid browser function table. Some functionality may be restricted. [000:056] Warning(optionsfile.cc:47): Load: Could not open file, err=2 [000:056] No bp log location saved, using default. [000:056] Browser XEmbed support present: 1 [000:056] Browser toolkit is Gtk2. [000:056] Using Gtk2 toolkit ** (Eclipse:7391): DEBUG: NP_Initialize ** (Eclipse:7391): DEBUG: NP_Initialize succeeded ** (Eclipse:7391): DEBUG: NP_Initialize ** (Eclipse:7391): DEBUG: NP_Initialize succeeded ** (Eclipse:7391): DEBUG: NP_Initialize ** (Eclipse:7391): DEBUG: NP_Initialize succeeded java version "1.6.0_23" OpenJDK Runtime Environment (IcedTea6 1.11pre) (6b23~pre11-0ubuntu1.11.10.2) OpenJDK 64-Bit Server VM (build 20.0-b11, mixed mode) java.io.FileNotFoundException: /home/amatteo/.eclipse/org.eclipse.platform_3.7.0_155965261/configuration/portal.1.2.7.024747/aptana/favicon.ico (No such file or directory) at java.io.FileInputStream.open(Native Method) at java.io.FileInputStream.<init>(FileInputStream.java:120) at com.aptana.ide.server.jetty.ResourceBaseServlet.doGet(ResourceBaseServlet.java:136) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:487) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:362) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:729) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.Server.handle(Server.java:324) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:505) at org.mortbay.jetty.HttpConnection$RequestHandler.headerComplete(HttpConnection.java:829) at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:513) at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:211) at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:380) at org.mortbay.jetty.bio.SocketConnector$Connection.run(SocketConnector.java:228) at org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:488) 2012-05-27 16:06:03.277::WARN: /favicon.ico: java.io.IOException: /home/amatteo/.eclipse/org.eclipse.platform_3.7.0_155965261/configuration/portal.1.2.7.024747/aptana/favicon.ico (No such file or directory) It was working perfectly till a few days ago!

  Read the article

• Is there a better term than "smoothness" or "granularity" to describe this language feature?

  - by Chris Stevens

  One of the best things about programming is the abundance of different languages. There are general purpose languages like C++ and Java, as well as little languages like XSLT and AWK. When comparing languages, people often use things like speed, power, expressiveness, and portability as the important distinguishing features. There is one characteristic of languages I consider to be important that, so far, I haven't heard [or been able to come up with] a good term for: how well a language scales from writing tiny programs to writing huge programs. Some languages make it easy and painless to write programs that only require a few lines of code, e.g. task automation. But those languages often don't have enough power to solve large problems, e.g. GUI programming. Conversely, languages that are powerful enough for big problems often require far too much overhead for small problems. This characteristic is important because problems that look small at first frequently grow in scope in unexpected ways. If a programmer chooses a language appropriate only for small tasks, scope changes can require rewriting code from scratch in a new language. And if the programmer chooses a language with lots of overhead and friction to solve a problem that stays small, it will be harder for other people to use and understand than necessary. Rewriting code that works fine is the single most wasteful thing a programmer can do with their time, but using a bazooka to kill a mosquito instead of a flyswatter isn't good either. Here are some of the ways this characteristic presents itself. Can be used interactively - there is some environment where programmers can enter commands one by one Requires no more than one file - neither project files nor makefiles are required for running in batch mode Can easily split code across multiple files - files can refeence each other, or there is some support for modules Has good support for data structures - supports structures like arrays, lists, and especially classes Supports a wide variety of features - features like networking, serialization, XML, and database connectivity are supported by standard libraries Here's my take on how C#, Python, and shell scripting measure up. Python scores highest. Feature C# Python shell scripting --------------- --------- --------- --------------- Interactive poor strong strong One file poor strong strong Multiple files strong strong moderate Data structures strong strong poor Features strong strong strong Is there a term that captures this idea? If not, what term should I use? Here are some candidates. Scalability - already used to decribe language performance, so it's not a good idea to overload it in the context of language syntax Granularity - expresses the idea of being good just for big tasks versus being good for big and small tasks, but doesn't express anything about data structures Smoothness - expresses the idea of low friction, but doesn't express anything about strength of data structures or features Note: Some of these properties are more correctly described as belonging to a compiler or IDE than the language itself. Please consider these tools collectively as the language environment. My question is about how easy or difficult languages are to use, which depends on the environment as well as the language.

  Read the article

• C# Domain-Driven Design Sample Released

  - by Artur Trosin

  In the post I want to declare that NDDD Sample application(s) is released and share the work with you. You can access it here: http://code.google.com/p/ndddsample. NDDDSample from functionality perspective matches DDDSample 1.1.0 which is based Java and on joint effort by Eric Evans' company Domain Language and the Swedish software consulting company Citerus. But because NDDDSample is based on .NET technologies those two implementations could not be matched directly. However concepts, practices, values, patterns, especially DDD, are cross-language and cross-platform :). Implementation of .NET version of the application was an interesting journey because now as .NET developer I better understand the differences positive and negative between these two platforms. Even there are those differences they can be overtaken, in many cases it was not so hard to match a java libs\framework with .NET during the implementation. Here is a list of technology stack: 1. .net 3.5 - framework 2. VS.NET 2008 - IDE 3. ASP.NET MVC2.0 - for administration and tracking UI 4. WCF - communication mechanism 5. NHibernate - ORM 6. Rhino Commons - Nhibernate session management, base classes for in memory unit tests 7. SqlLite - database 8. Windsor - inversion of control container 9. Windsor WCF facility - for better integration with NHibernate 10. MvcContrib - and in particular its Castle WindsorControllerFactory in order to enable IoC for controllers 11. WPF - for incident logging application 12. Moq - mocking lib used for unit tests 13. NUnit - unit testing framework 14. Log4net - logging framework 15. Cloud based on Azure SDK These are not the latest technologies, tools and libs for the moment but if there are someone thinks that it would be useful to migrate the sample to latest current technologies and versions please comment. Cloud version of the application is based on Azure emulated environment provided by the SDK, so it hasn't been tested on ‘real' Azure scenario (we just do not have access to it). Thanks to participants, Eugen Gorgan who was involved directly in development, Ruslan Rusu and Victor Lungu spend their free time to discuss .NET specific decisions, Eugen Navitaniuc helped with Java related questions. Also, big thank to Cornel Cretu, he designed a nice logo and helped with some browser incompatibility issues. Any review and feedback are welcome! Thank you, Artur Trosin

  Read the article

• Getting Ramped for Silverlight 4

  - by GeekAgilistMercenary

  Here is a quick walk through of setting up your Silverlight 4 development environment.  The first assumed step is that you have Visual Studio 2010 already installed and any appropriate patches.  Then download the following in order and install each. Silverlight 4 Tools RC2 for Visual Studio and Silverlight 4 RTW Expression Blend 4 Release Candidate Silverlight Toolkit - Not necessary, but lots of good bits in this download. WCF RIA Services - This is also not necessary, but you should grab it just in case anyway. Once each of these are installed jump into Visual Studio 2010.  Start a new Silverlight 4 Project by going to File -> New -> Project -> and select the Silverlight Project Templates.  Here you'll see a new list of projects that are specific to the above listed downloads. Silverlight Business Application WCF RIA Service Class Library Silverlight Unit Test Application One way to confirm (and what I am going to display here in this entry) Silverlight 4 is installed ok is to select the Silverlight Application Template and start a new project. On the next screen you will see some of the standard options.  I always go with the ASP.NET MVC Option and with these new installations I am going to select Silverlight 4 (should be selected already) from the drop down and check the Enable WCF RIA Services check box. I also, for good measure, always create a unit test project for the ASP.NET MVC Project that will host the Silverlight Application Project.  When all is setup, the Solutions Explorer should look like what is shown below. Add the following code to the XAML of the MainPage.xaml of the Silverlight Project. <UserControl x:Class="Silverlight4.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="400">   <Grid x:Name="LayoutRoot" Background="White"> <TextBlock x:Name="textBlockTest" Text="Hello World!" /> </Grid> </UserControl> Now execute the project, if all runs well you have installed Silverlight 4 successfully. Bam!  Silverlight 4 ready to go!  I will have more on Silverlight 4 very soon, as I will be starting a project (personal) and blogging it as I work through it.  Also, if you run into any issues I would like to read about them, so please comment.  I had a few issues and also had some design time rendering issues in the VS 2010 IDE when I installed these bits at first. Check out the original entry here.

  Read the article

< Previous Page | 334 335 336 337 338 339 340 341 342 343 344 345  | Next Page >