Search Results

Search found 1529 results on 62 pages for 'bandwidth'.

Page 34/62 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• Cascading switches: uplink to uplink?

  - by wuckachucka

  I'm a bit confused as to why I haven't seen any references online to using Switch A's uplink port (1Gbps, 24-port 10/100) to connect to Switch B's uplink port: everything I've seen -- including documentation, forums, articles, etc. -- has Switch A's uplink port going to one of Switch B's 10/100 access ports. As I understand it, the Uplink port (besides greater speed normally) is no different than another port except that it's "internally crossed-over" so that you can use a straight cable with it. I've also seen documentation on using the uplink port to connect a switch to a gateway router, or even a server, as it provides greater bandwidth than the access ports, but yet not sure why nobody seems to be cross-uplinking, even when there's 2 uplink ports available on some higher-end switches. Switch in question is Linksys SRW224P (x2). Am I missing something?

  Read the article

• Add 802.11n to existing 802.11g environment

  - by Andrew Robinson

  I have a small home network that is currently running 802.11g. Two computers that are capable of 802.11n and two devices (a BlackBerry and a Skype phone) that are limited to 802.11g. I have a few neighbors running 802.11g but their signals are very weak. How big an impact will the two G devices have on N speeds? Will they pull the whole network back down to G? These two devices are hardly ever used where as the other N devices are heavily used. If I add an N router to the network (instead of replacing the G) and set my existing G router to use channel 1 with 20MHz bandwidth and then set the N router to use 6 & 11 for 40MHz will I eliminate the overlap and allow for full speed on both networks?

  Read the article

• setting up/installing/configuring nginx LEMP stack on fresh VPS server

  - by Grant Tailor

  I need some help in settingup/installing and configuring nginx LEMP stack on a fresh new VPS I have. The specs of the CentOS 5.7 VPS are 2GB DDR3 ECC RAM(4GB burst), 1 core 1.5Ghz(3Ghz burst) and 100GB RAID 10 storage, unmetered bandwidth @ 100Mpbs all for a whopping $25/month(unbeatable, yeah I know :) Anyways I have followed this LEMP (will also need MySQL and PHP) stack guide on linode http://library.linode.com/lemp-guides/centos-5 but basically what I want is to be able to host multiple website on this webserver after everything is setup. I am used to using DirectAdmin control panel on other server and want to have things setup so I can host multiple websites - mostly wordpress and drupal themes. Lets say 10 websites on this nginx web server. So can someone please help me on what I need to do to take "full" advantage of nginx power and performance, while been able to easily manage these multiple websites (wordpress and drupal themes)?

  Read the article

• Why do my download speeds drastically vary during a download?

  - by J. Anthony Carter

  I watch the download speed rise and fall like waves in a storm. At night, during low bandwidth usage I have achieve speeds as high as 3.23 M/sec but the watch them decline to 250 K/sec. and then climb back up. Over and over. During the day my best is around 1.67 M/sec with lows into the 65 K/sec. On top of this, why does a download need to slow down when approaching the end of the download? It's not like a multi-hundred ton train needing to decrease speed as it approaches the station.

  Read the article

• Zero-channel RAID for High Performance MySQL Server (IBM ServeRAID 8k) : Any Experience/Recommendation?

  - by prs563

  We are getting this IBM rack mount server and it has this IBM ServeRAID8k storage controller with Zero-Channel RAID and 256MB battery backed cache. It can support RAID 10 which we need for our high performance MySQL server which will have 4 x 15000K RPM 300GB SAS HDD. This is mission-critical and we want as much bandwidth and performance. Is this a good card or should we replace with another IBM RAID card? IBM ServeRAID 8k SAS Controller option provides 256 MB of battery backed 533 MHz DDR2 standard power memory in a fixed mounting arrangement. The device attaches directly to IBM planar which can provide full RAID capability. Manufacturer IBM Manufacturer Part # 25R8064 Cost Central Item # 10025907 Product Description IBM ServeRAID 8k SAS - Storage controller (zero-channel RAID) - RAID 0, 1, 5, 6, 10, 1E Device Type Storage controller (zero-channel RAID) - plug-in module Buffer Size 256 MB Supported Devices Disk array (RAID) Max Storage Devices Qty 8 RAID Level RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 1E Manufacturer Warranty 1 year warranty

  Read the article

• VPS for Glassfish

  - by Harry Pham

  Our small startup company plan to deploy a web application on Glassfish, I and wonder if some of the experience user out there can answer me couple question. When I shopping for server, I usually look at RAM amount, as GF does required good amount of RAM to run, below are the two sites with significant price different for the same amount of RAM. I wonder why?? Godaddy: http://www.godaddy.com/hosting/virtual-dedicated-servers.aspx?ci=9013 Versus http://entic.net/Servers Does below plan from Godaddy consider good to run GF application. OS: Linux CentOS • RAM: 4 GB • Storage: 60 GB • Bandwidth: 2,000 GB/mo Our web application is a social network, expected to have 2000-4000 users to start with

  Read the article

• Troubleshooting intermittantly long 'page loading' problem

  - by justSteve

  Working off IIS 7 with an asp.net mvc app. Most page accesses are lightening quick. Sometimes the browser reports 'page loading' for an exceptionally long time. We are still in the development/testing mode so it's not a network/bandwidth issue. Happens in both IE and FF. No explicit error conditions in the server logs. If i could reproduce it i could run firebug/fiddler to give more info. As it is, it's a little too infrequent to simply leave both those running hoping for the condition to fire - unless/until that's the only option to get better info. I have a hunch this is client-side jquery/ajax related but only a hunch - don't have enough background in either jQuery or MVC to really know what can go wrong. Any initial troubleshooting suggestions welcome. thx

  Read the article

• Does anyone provide a Skype connection service?

  - by Runc

  Is there a way of offering Skype access to incoming calls while keeping all telephony traffic over our chosen business telephony provision? Is there a 3rd party who can route incoming Skype calls to our telephone system? The business has had requests from contacts wanting to call us via Skype, but we want to keep all telephony via our PBX and phone lines as our geographic location limits our available internet bandwidth. We also prevent installation of non-standard applications on desktops and do not want to add Skype to our build. I was wondering if there were any 3rd parties that provide a connection service that would allow our contacts to call via Skype and us receive the calls via our phone system.

  Read the article

• Apache randomly timing out

  - by Zaid

  I've been wrestling with this problem for few days now. Apache works fine. Then suddenly starts timing out. There is nothing in the error log. Few more things: - I've gone so far as to reinstall the box. - The codebase has not been touched in months. - I've done the speech test so I know it's not a bandwidth overload problem - Restart apache does not necessarily fix the issue, even temporarily (only thing that does is random attempts) If you can guide me to tools that can help me figure this out or if you know any specifics I should see, appreciate it.

  Read the article

• Can we increase Torrent share ratio using Local Peer Discovery?

  - by Jagira

  I just want to know whether this is a flaw or not in Bittorrent system. Let us assume that I am member of a Private Torrent site which requires me to maintain a specific upload to download ratio. Will this work: I create a torrent of a large file say [ Fedora Linux ~ 4 GB ] and upload it to the tracker I download the same torrent using my ID and start it on another machine on LAN or a Virtual machine Both clients have Local Peer Discovery enabled, so they will find 'em [ not via DHT ] and start x'ferring data using LAN bandwidth at LAN speeds. Though both uploads and downloads will increase, my ratio will also increase If I reiterate the entire process 'n' times, the numerator in the "RATIO" i.e Upload will become so large that the effect of downloads on ratio will become less. I want to know whether this is legitimate???

  Read the article

• In TCP/IP terms, how does a download speed limiter in an office work?

  - by TessellatingHeckler

  Assume an office of people, they want to limit HTTP downloads to a max of 40% bandwidth of their internet connection speed so that it doesn't block other traffic. We say "it's not supported in your firewall", and they say the inevitable line "we used to be able to do it with our Netgear/DLink/DrayTek". Thinking about it, a download is like this: HTTP GET request Server sends file data as TCP packets Client acknowledges receipt of TCP packets Repeat until download finished. The speed is determined by how fast the server sends data to you, and how fast you acknowledge it. So, to limit download speed, you have two choices: 1) Instruct the server to send data to you more slowly - and I don't think there's any protocol feature to request that in TCP or HTTP. 2) Acknowledge packets more slowly by limiting your upload speed, and also ruin your upload speed. How do devices do this limiting? Is there a standard way?

  Read the article

• Why does 1GBit card have output limited to 80 MiB ?

  - by Gallus

  I'm trying to utilize maximal bandwidth provided by my 1GiB network card, but it's always limited to 80MiB (real megabytes). What can be the reason? Card description (lshw output): description: Ethernet interface product: DGE-530T Gigabit Ethernet Adapter (rev 11) vendor: D-Link System Inc physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 11 serial: 00:22:b0:68:70:41 size: 1GB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation The card is placed in following PCI slot: *-pci:2 description: PCI bridge product: 82801 PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: 92 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list The PCI isn't any PCI Express right? It's a legacy PCI slot? So maybe this is the reason? OS is a linux.

  Read the article

• hung up troubleshooting packet discards

  - by Chris Satola

  I realize my question is generic, but hopefully someone may have some guidance for me. My network consists of Cisco switches. I am seeing a significant amount (upwards of millions of packets per day) transmit drops between two switches. One being a 3750 and the other a 3560. The peak throughput of this link is only upper 400Mbps, so it shouldn't be a bandwidth issue. At this point, I am sort of clueless where to look or what tools I can use to determine what packets are dropping and why. I can setup a SPAN port on that link and wireshark it, but I don't know if that could tell me anything. Does anyone have any suggestions? Thanks in advance.

  Read the article

• Network monitoring solution

  - by Hellfrost

  Hello Serverfault ! I have a big distributed system I need to monitor. Background: My system is comprised of two servers, concentrating and controlling the system. Each server is connected to a set of devices (some custom kind of RF controllers, doesnt matter to my question), each device connects to a network switch, and eventually all devices talk to the servers, the protocol between the servers and the devices is UDP, usually the packets are very small, but there are really a LOT of packets. the network is also somewhat complex, and is deployed on a large area physically. i'll have 150-300 of these devices, each generating up to 100+ packets per second, and several network switches, perhaps on 2 different subnets. Question I'm looking for some solution that will allow me to monitor all this mess, how many packets are sent, where, how do they move through the network, bandwidth utilization, throughput, stuff like that. what would you recommend to achieve this? BTW Playing nice with windows is a requirement.

  Read the article

• HP-UX -> Linux incremental remote backup

  - by stack_zen

  Hi. I've the need to setup a differential backup process from a range of remote HP-UXes to a central RHEL5 server. I'd happily go with rsync, problem is, stock HP-UX 11.11 has no built-in rsync and I don't have permissions to install any software on the remote stock HP-UXes. How should I approach this? HP-UX provides: fbackup (HP-UX exclusive) cpio (available in RHEL5, allows backing up only the files which changed, but always grabs the totality of the file) ssh remote_user@remote_host 'find /u01/engine/logs/ -type f -name "*.log" | cpio -o | gzip -' | cpio gunzip - | -idmv Those solutions don't really answer my incremental (bandwidth efficiency) problem do they?

  Read the article

• IIS7 response size thresholds

  - by DanielM

  I have a customer who is attempting video playback via HTTP progressive download of very large files ( 1 GB). There is no problem once a file is cached at the edge via my CDN, but hits to my origin (first hits prior to edge-cache population) experience stalling and loss of sync between audio and video about an hour and a half into playback. This occurs pretty reliably at that point, suggesting that some threshold somehwere is getting hit. Are there IIS configuration knobs governing HTTP Response size? Other data points: I am unable to replicate this problem. I am looking at client bandwidth and last mile issues. I am looking at possible encoding recipe dependencies. But this problem never came up when we were using a "push" cache configuration (CDN-hosted origin), so something funky serverside at my origin seems like a likely culprit. Thanks ...

  Read the article

• How can I unlock a file without closing the file handle?

  - by netvope

  When I'm downloading a video file with Google Chrome, the file is locked and cannot be opened by media players. I want to be able to play the file while it's being downloaded. The video bitrate is lower than my Internet bandwidth so it wouldn't be a problem. Popular unlockers work by closing file handles, which would interrupt the download. How can I remove the read-lock without closing the file handle? Can I replace the read-lock with a write-lock?

  Read the article

• Dialing into multiple PPP connections on Ubuntu

  - by sharjeel

  I have multiple 3G USB based Modems. I would like them to keep connected simultaneously, NOT necessarily aggregating their bandwidth; a separate intelligent application would manage their utilization effectively. However I am running into problem of setting up proper routes for the ppp0,ppp1 interfaces: when one of them connects, other's entries in the routing table get updated so it is no more usable. If I reconnect the second one, it would override the first one's routing entries. If I do it over and over, sometimes both of them's entries disappear while in rare cases the two work well. I have tried it both using NetworkManager as well as WVDial but issue pops up in both of these. Perhaps both of them use same PPP dialer at the backend and thats why this issue appears. What is the proper solution to make them work together? In the long run, I'd also like them to automatically dial in once USB gets connected.

  Read the article

• automating sql express backup via VSS backup

  - by Ornus

  I need to set up on my server automated daily SQL db backups (sql express, so no maintenance plans). To keep things simple I'm gonna use a backup solution (JungleDisk) that uses VSS to back up the DB file. SQL fully supports VSS and on requests freezes DB I/O, so I understand I'm taking snapshots. JungleDisk supports doing differential back up and compression, so it simplifies things and keeps the cost/bandwidth down. Is it enough to just backup up db file (mdf). Do I need to back up transaction log (ldf) file as well? I'm ok with losing a day's worth of work (since the last backup). if I go this route, what's the best way to restore the database? are there any issues with this approach I'm not aware of?

  Read the article

• What can cause peaks in pagetables in /proc/meminfo ?

  - by Fuzzy76

  I have a gameserver running Debian Lenny on a VPS host. Even when experiencing a fairly low load, the players start experiencing major lag (ping times rise from 50 ms to 150-500 ms) in bursts of 3 - 10 seconds. I have installed Munin server monitoring, but when looking at the graphs it looks like the server has plenty of CPU, RAM and bandwidth available. The only weird thing I noticed is some peaks in the memory graph attributed to "page_tables" which maps to PageTables in /proc/meminfo but I can't find any good information on what this might mean. Any ideas what might be causing this? If you need any more graps, just let me know. The interrupts/second count is at roughly 400-600 during this period (nearly all from eth0). The drop in committed was caused by me trying to lower the allocated memory for the server from 512MB to 256MB, but that didn't seem to help.

  Read the article

• Thunderbird-3 keeps on downloading already downloaded messages again?

  - by Vivek Sharma

  I am using Thunderbird for my gmail account, with IMAP settings. All my folders are synchronized. A very strange behavior, after all my mails are downloaded, TB3 starts downloading email again. At times saying "downloading x out of y messages" where x y (like now downloading 19 out of 11 messages). Had the same problem in TB3 for windows so, replaced TB with Outlook-07, issue resolved. But on linux, I dont like the evolution's interface, so i have no choice but to stick to TB. Any suggestions how to TB not eat my bandwidth.

  Read the article

• squid transparent proxy on all ports

  - by Yves Richard

  I have setup squid as a transparent proxy by redirecting port 80 to the native squid port 3128. I know there are issues with getting secure ports like ssl and imaps to go though the proxy but can I redirect all other ports through the proxy as well. I am trying to get a better idea of bandwidth usage. I have setup iptables to log usage and i am getting most traffic going into the related/established rule. I am trying to determine the origins of this traffic by sending traffic to squid for more detailed logging.

  Read the article

• Load balancing with Cisco router

  - by you8301083

  I have a Cisco router with two bonded T1's which are setup as a VPN to the main office. We need more bandwidth but can't get other connections (or it's too costly), so I would like to have a dsl connection installed. This DSL connection will run over a VPN to the same main office, but it won't be bonded with the T1's - so it won't act as a single connection. Since the three circuits won't act as a single connection (basically would be two connections 2 T1's + 1 DSL) we would have to split the network in half - but I don't want to do that. Instead, would it be possible to send all HTTP/HTTPS over the DSL connection but send all mission critical data (such as voice/active directory) over the T1's? I basically want to send specific ports over DSL and everything else over the T1's without separating half of the users traffic over the DSL and the rest over the T1's.

  Read the article

• Looking for a good Web Server that is cheap

  - by SoLoGHoST

  I am a Project Manager, and former Lead Developer for a software portal system that requires a forum software to run. I am in need of a server that is cheap, reliable, and supports the latest PHP (5.2+), MySQL, unlimited e-mails (preferably), a cPanel, multiple sub-domains (atleast 3+). Currently I am paying $34.95 USD/month (approx. $420 USD/year). This is too high for me to pay to keep the site running. I just recently became Project Manager and in charge of Finances and I'm extremely concerned for the future of Dream Portal. With those prices I'm not sure I'll be able to keep it running for too long. Can someone please tell me of a good server that meets all of the requirements that I listed above that is cheaper on a yearly basis? Note: Currently on a Dedicated Server with limited disk space at 15000 MB (15 GB), monthly bandwidth = 500000 MB, 50 emails limit, 20 sub-domains limit, 30 FTP accts., and 25 SQL Databases.

  Read the article

• Advice for migrating email server

  - by Chris Adams

  Hi there, I'm planning to migrate a Zimbra server with about 200gb of data from a server hosted in an office into a datacentre, to increase uptime (we've had a couple of outages when our network here started flaking out, and we have people in other countries relying on this server too). However, I'm not sure how best to migrate the data into the data centre without rendering the connection unusable during office hours, because there's far too much to send in over night over the two meg upstream connection we have here. I'm familiar with using tools like nice to stop a long running process degrading machine performance - is there a simple way to throttle a connection between office hours, so the long running transfer doesn't block the pipe, but then opens up outside of office hours to make the most of the bandwidth? I'm aware the alternative here is to simply mail a hard drive to the data centre, but I'd like to avoid doing that if I could. We're using Centos Linux for our servers, in the office and the datacentre, so extra points for an open source linux answer.

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >