Search Results

Search found 2372 results on 95 pages for 'flashing the bios'.

Page 34/95 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• Having problems booting xubuntu after installation

  - by lagaffenewbe

  I'm newbie with ubuntu, I tried to install ubuntu, at the beginning xubuntu work for the first upgrade to xubuntu 12.04, but after the reboot, no winxp media center ether Xubuntu won't start and I have a screen Ctrl+Alt+Del nothing else. I read a little about, maybe the sata enabled on the bios. What is the problem and can it be fixed or do I have to remove xubuntu. Partition is : 100gb xubuntu 220gb winxp I have an external drive 1 tb Thanks for the help.

  Read the article

• Dual Boot ubuntu 12.04 and Windows 7 with on two separate SSDs with UEFI

  - by Björn

  With the following setup I get a blinking cursor after installation: Windows 7 64bit installed in first SSD (not UEFI, using MBR) Installation of Ubuntu 12.04 64Bit on gpt partioned disk seems to work without problems but does not boot. It stops with a blinking cursor. Partitioning scheme: sdb1 efi boot partition fat32 sdb2 root btrfs sdb3 home btrfs sdb4 swap Is it possible to mix uefi BIOS with MBR and gpt when using two separate SSDs? I tried grub2 into a MBR as well but it would not install there...

  Read the article

• ASUS X401A ubuntu installation

  - by fabian

  I tried to install ubuntu in my laptop ASUSX401A. I removed windows in the partition tablea at the installation. All ok up to here, however when I reboot the HD after finish the installation, the HD was not recognized, in the bios not appeared the HD the only option was the realtek card, then was impossible to enter to ubuntu. After that I tried again to install ubuntu but now I have a error in the input/output when I wanted the enter the table partion. I appreciate any help Fabian

  Read the article

• Graphics card fan is loud (additional graphics card drivers cause problems)

  - by tk4muffin

  Okay this explanation is a bit longer ... but I start at the beginning: I've been using Windows 7 for a very long time, shortly after the release of v12.10 I installed Ubuntu via Windows installer. Everything worked fine but the fan of the graphics card. After a bit of research I found out, that I just had to select a different driver (nvidia-current (proprietary, tested) worked pretty well). This also fixed some graphical bugs when I just logged into my account. Due to my university I got a MSDNAA-Account (allows me to download every Windows OS for free). I downloaded and installed Windows 8. After configuration I installed ubuntu via the Windows installer once again and the first couple launches of ubuntu went well. Suddenly ubuntu didn't launched anymore...caused by some hard-disk errors and had no clue what to do. So I kept working on Windows 8 - unfortunately. After playing around with the new Windows, I put my PC to sleep-mode. I couldn't wake my PC up and it wasn't responding to anything (neither mouse-movement, -clicks or keyboard strokes, nor the power-button and the reset-button worked), so I pulled the plug. Turns out, this was a huge mistake. Somehow the BIOS broke and after restarting a couple of times, the BIOS repaired itself. Neither Windows 8, nor ubuntu where bootable. Now I had to install ubuntu several times, because after rebooting unity was hidden and I didn't know what the problem was and how to fix it. I finally realized that this problem was caused by the graphics card driver, which I've changed to the nvidia-current (This dirver worked fine before my PC "crashed"). So I installed Windows 8 again and after a bit of usage I installed ubuntu once again (via DVD). The booting of ubuntu and windows works fine - so far. But I'm still not able to change the graphics card driver without unity hiding away after restarting the OS. The noisy fan is really disturbing my work... PC Specs: Processor: Intel Core 2 Duo COU E8400 @ 3GHz x2 Memory: 7.8 GB OS type: 64-bit Graphics Card: GeForce 9600 GT Motherboard: Asus P5Q I hope the information given are enough.

  Read the article

• Does Ubuntu run on current Asus Transformer Prime?

  - by Ubuntu User

  I've read instructions about dual boot Android / Transformer Prime (a significant factor in ordering one). Also about not working with /latest/ Transformer Prime (firmware / BIOS?) Also about imminent Ubuntu ARM support. Will I be able to run Ubuntu in a day or two when Transformer arrives? Also, am I right to assume I can restore Transformer to factory status if I break something in the attempt?

  Read the article

• ACPI _OSC control

  - by nmc

  I've noticed an error from dmesg output that ubuntu canot enable ASPM: [ 0.192722] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.192728] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) While I know that this is not a bug, I'd like to ask if there is a way to correct it and enable ASPM, the reason being that it should increase battery life (powertop shows that PCIe is always 100% on). Edit: I am running on an ASUS eee pc 1015px with the latest bios version (1401)

  Read the article

• 12.04.1 desktop monitor "Out of Range"

  - by Zach

  I know this question has been asked many-a-times, but I cant seem to get a definite answer to it. I am running 12.04.1 on my HP Pavillion a6 109n PC. Processor is a AMD Athlon 64 x2 Dual core Processor. Every time I boot up my desktop, it runs BIOS, then it boots up Linux. After about 10 seconds, a little blue screen comes up saying: Out of Range: H. Frequency: 92.7KHz V. Frequency: 58.3Hz Can anyone help with this?

  Read the article

• Windows vista shows ISO file as ZIP!

  - by Nedish

  When I download the ISO file my system shows the file as a zip file and not an ISO. I have tried to burn the file as an image to a DVD but my laptop will not bootup from the CD. Settting in the BIOS are ok so I guess the problem is with the ISO file or the way i burned the CD. I have follwed the instructions on the site for downloading and burning an ISO image to CD so I guess that my problem is with the file association in windows Vista. Any ideas and suggestrions welcome Thanks

  Read the article

• VM VirtualBox doesn't allow to enable 64-bit guest on Ubuntu 12.04 and Lenovo G500S

  - by Filip

  I've installed VM VirtualBox v. 4.3.8 on my Ubuntu 12.04 LTS (Lenovo G500S with Intel 1005M processor) and I can't configure any 64-bit guest (nor Windows, neither other OS). Inslalation of Win 8.1 64-bit under 32-bit profile obviously fails... My processor supports VT-x technology, but in my BIOS there is no enable/disable option for VT-x. Is there any way to force VirtualBox to support 64-bit guest ?

  Read the article

• How to detect Creative Sound blaster Audigy 2?

  - by Chris

  I have installed a pci 7.1 sound card Creative Sound Blaster Audigy 2, on my 10.10 Ubuntu 64 bit installation. I have disabled the on board sound card from bios. I boot and the system cannot recognize my "new" sound card. When I execute aplay -l I get this responce: aplay: device_list:235: no soundcards found... I take a guess and I think it is probably something wrong with my sound modules.

  Read the article

• How to enable hard-blocked bluetooth in Thinkpad Edge 320

  - by Non

  I'm trying to use the built-in bluetooth device of my Lenovo Thinkpad E320. It seems to be hard blocked, but i can't find any possibility to unblock it. rfkill list returns: 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: yes Hard blocked:yes cat /proc/acpi/ibm/bluetooth returns: status: disabled commands: enable, disable I tried to enable it by: Pressing Fn+F9 (Radio controll) echo enable | tee /proc/acpi/ibm/bluetooth rfkill unblock bluetooth Trough the BIOS. But it's not mentioned at all None of the actions influenced the ouputs above.

  Read the article

• Booting From USB Problem

  - by Rob Barker

  I'm trying to boot Ubuntu 10.12 from a usb memory stick in a first time installation, but i keep getting a message preventing me from progressing any further. It says this. SYSLINUX 4.06 EDD 4.06-pre1 Copyright (c) 1994-2012 H.Peter I've reordered my bios boot priorities correctly so the usb loads before the hard drive. My hard drive is faulty, but i am getting a new one tomorrow. Any ideas? Help would be much appreciated.

  Read the article

• Looking to trade a 1U HP Proliant DL360 G5 in exchange for a small linux VPS

  - by user597875

  I have a 1U HP Proliant DL360 G5 that I have no place to rack and would like to trade it for a small linux VPS. If interested let me know... Here are the specs of the server: Model: Intel Xeon CPU 5150 @ 2.66GHz, 4MB L2 Cache Processor Speed: 2.7GHz Processor Sockets: 2 Processor Cores per Socket: 2 Logical Processors: 4 8GB of memory 4x72GB 10k SAS drives Manufacturer: HP Model: Proliant DL360 G5 BIOS Version: P58

  Read the article

• How do I set up multiple HDD?

  - by mark kirby

  I got some new hard discs and would like to set my PC up in the following way: Ubuntu is currently installed on one drive I want to put Windows on a second drive I would like a third drive for shared content (music and stuff) that both OSes can access What I need to know is what format should the content drive be? How should I configure the drive order in my bios for GRUB to be boot manager and how to configure GRUB for multi-HDD booting?

  Read the article

• Strange Grub behavior Series 9

  - by jothebo

  I have got a Samsung Series 9 900x3c with Ubuntu 12.04 on. After installing Ubuntu Grub would not load completely (only parts of the Menu were showing) every time so I launched the Boot repair indicating the use of an UEFI bios. Now Grub always loads completely but I do not seem to be able to launch Ubuntu directly. Instead I have to select Advanced options for Ubuntu and the newest Kernel Version and then the boot starts. Any ideas? Thanks a lot in advance Johannes

  Read the article

• Packard Bell TK11 Wifi not working (Ubuntu 12.10)

  - by Ingmar

  Hardware: Packard Bell EasyNote TK11BZ, BIOS version 1.15 Broadcom BCM43227 802.11 b/n/g Problem: Everything works as it should, except the wireless connection. The Wifi device is enabled in the "Additional Drivers" section of Software Sources, but does not even show up in the network manager drop-down. sudo lshw -C network: *-network UNCLAIMED description: Network controller product: BCM43227 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0100000-f0103fff

  Read the article

• Cannot bootup windows 7 after upgrading to ubuntu 12.04

  - by dhaval

  I have tried boot-repair grub-update bootrec commands booting into safe mode with command prompt gets stuck with classpnp.sys file changing sata options in bios etc but windows keep throwing the STOP error /blue screen. Heres details from boot-repair http://paste.ubuntu.com/5804023/ I have updated ubunto from 10.x to 12.x and have lost a day with no productive work heres a screenshot of the blue screen

  Read the article

• Byobu not displaying correct CPU temptrature

  - by aserwin

  I have an AMD FX 8120 proccy that is overclocked to 4100Mhz. Since the overclocking, Byobu and other temprature reading apps (Conky, etc) do not read the temprature accurately. I can see the correct temp in the bios, and with no overclocking everything inside of Gnome reads correctly. Why should this be? It is (seemingly) obviously an issue with Ubuntu (or perhaps Gnome?). Has anyone else experienced this?

  Read the article

• Insight into GNU/Linux boot process

  <b>Musing with GNU/Linux:</b> "In this document we will take a look at the different aspects of the boot process. Such as the BIOS which is the first code which runs, the boot loaders that can load different operating systems, pass arguments to the kernel, load it from different sources like a hard drive, a flash, and network & finally the kernel itself."

  Read the article

• Freeze after 'init-bottom' script before installation starts on a Lenovo G475

  - by NikitaBaksalyar

  I'm trying to install Ubuntu 11.04 x86 on a Lenovo G475 laptop (based on AMD Fusion), but installation freezes after loading ends on a splash screen. I've tried to run installation without quiet and splash parameters - but result is the same: installation freeze after running "init-bottom" script. I thought that it can be because of BIOS settings, but I've also tried to change them several times without any result.

  Read the article

• lubuntu DVD not boot

  - by tuxi

  I downloaded from first link on http://lubuntu.net/ Burned a DVD with CD Burner XP in another PC , and at the main computer changed BIOS boot setting to look at CD DVD driver first. Now at the main computer there is an old Ubuntu 8 Hardy Heron. There is no direction when i put new burned DVD at DVD driver. Where am i wrong? Is there something that i misunderstand, for example lubuntu is really an OS which can be installed on harddisk?

  Read the article

• Why is my CPU being used while doing nothing?

  - by Jop

  I have installed Ubuntu GNOME in BIOS mode on my MacBook (BIOS mode so that the proprietary NVIDIA drivers work. I need them for gaming.). For some reason, a lot of CPU is being used while not really doing anything. It swings between 20-30% on both cores, usually. But when I look at the list of processes and sort by CPU usage, I do not see anything special. No processes intensively doing anything. How can I fix this? EDIT: Output of top command. jop@jop-MacBook:~$ top top - 17:08:02 up 41 min, 2 users, load average: 0,51, 0,69, 0,95 Tasks: 202 total, 2 running, 200 sleeping, 0 stopped, 0 zombie %Cpu(s): 11,9 us, 5,8 sy, 0,0 ni, 80,3 id, 0,5 wa, 0,0 hi, 1,5 si, 0,0 st KiB Mem: 7908316 total, 2919940 used, 4988376 free, 153248 buffers KiB Swap: 3906244 total, 0 used, 3906244 free, 1326544 cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3785 root 20 0 195m 82m 26m S 22,9 1,1 2:43.77 Xorg 4429 jop 20 0 1543m 150m 60m S 7,3 1,9 1:26.26 compiz 4198 jop 20 0 633m 21m 11m S 1,7 0,3 0:04.96 unity-panel-ser 7425 jop 20 0 564m 18m 12m S 1,7 0,2 0:00.84 gnome-terminal 7019 jop 20 0 806m 89m 46m S 1,0 1,2 0:10.01 chrome 7323 jop 20 0 966m 93m 23m S 1,0 1,2 0:06.85 chrome 6742 root 20 0 0 0 0 S 0,7 0,0 0:00.43 kworker/0:3 3 root 20 0 0 0 0 S 0,3 0,0 0:06.01 ksoftirqd/0 7008 root 20 0 0 0 0 S 0,3 0,0 0:00.27 kworker/1:3 7302 jop 20 0 972m 96m 28m S 0,3 1,2 0:06.32 chrome 7310 jop 20 0 382m 63m 39m S 0,3 0,8 0:00.34 chrome 7498 jop 20 0 24840 1600 1120 R 0,3 0,0 0:00.22 top 1 root 20 0 27176 2944 1412 S 0,0 0,0 0:01.58 init 2 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kthreadd 5 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 kworker/0:0H 6 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kworker/u4:0 7 root rt 0 0 0 0 S 0,0 0,0 0:02.04 migration/0 Even when xorg isn't so busy like when I copied, CPU usage is higher then what the processes use.

  Read the article

• Wireless is disabled by hardware switch on Dell Inspiron 1750

  - by lowerkey

  I have a problem where Ubuntu (12.04) says there is a wireless network card, but it is disabled by a hardware switch. How do I turn it on? I checked the BIOS, and the wireless card is enabled there. Fn + F2 was also no success. The results of rfkill list: 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes sudo rfkill unblock wifi did nothing to the Wireless Status.

  Read the article

• Can I just download the Ubuntu ISO file to my USB and run it straight away with no installers?

  - by Paul Clarke

  I don't have access to running any installer at the minute so I knew that if running from the CD you just burn the iso file to the CD and your ready to go..but can I download this iso file to my USB and run it straight away when I change my bios to boot from USB?..or do I have to use the installer?..I can't use the installer for different reasons and I'm not really looking to install ubuntu just yet I just want to run it off my USB to try it out..so is it possible not to use the installer to put it on my USB? (I downloaded Ubuntu 12.10)

  Read the article

• How do I install lubuntu? (kernel panic)

  - by melvincv

  Please help me install Lubuntu 12.04 i386 on an old computer. I select the "Try Lubuntu without installing" and it crashes with a kernel panic. Rarely I do get to the live OS, but soon the display goes blank. The messages log gives me '[drm] ERROR GPU hung/wedged' The specs are: Pentium 4 2.4GHz 1GB DDR RAM 40GB PATA HDD Intel 845GL chipset (8MB framebuffer, 64MB shared system memory set in the BIOS)

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >