Search Results

Search found 8647 results on 346 pages for 'intel cpu'.

Page 34/346 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• Neccessity of push and pop operands on CPUs

  - by Hawken

  Why do we have commands like push and pop? From what I understand pop and push are basically the same as doing a (mov then add) and (sub then mov) on esp respectively. For example wouldn't: pushl %eax be equivalent to: subl $4, %esp movl %eax, (%esp-4) please correct me if stack access is not (%esp-4), I'm still learning assembly The only true benefit I can see is if doing both operation simultaneously offers some advantage; however I don't see how it could.

  Read the article

• Intel Matrix Storage Manager not showing on Asus P5W DH Deluxe?

  - by Leon

  I have set, under "Main" - "IDE Configuration" - "Configure SATA as" to "Raid" and "Onboard Serial-ATA BootRom" to "Enabled", but upon POST I still do not see the Intel Matrix Storage Manager screen where I can press Ctrl+I to set up my raid? I have the latest BIOS version EDIT: Although I had set the rom to "enabled", I then went and reset the bios settings to default. I then set the bootrom setting to "disabled", restarted and then "enabled" again and it seemed to work.

  Read the article

• Checking if Intel VT-x acceleration is enabled from inside a VMware virtual machine?

  - by user269950

  My (Fortune 500) company just rolled out new VMs and everyone is complaining they are dog slow. Is there any way I could verify, from inside a VM, whether Intel virtualization (VT-x) acceleration has been properly enabled? The processor claims to be a Xeon E7-2830 but the experience has been more like a first-gen Atom. I'd ask IT directly but I get the impression they're unlikely to respond to any suggestion that they are, in fact, drooling imbeciles.

  Read the article

• Which channels to have a raid 5 array on the Intel ICH10R controller?

  - by Chris_45

  What is the best option to have a raid 5 array with 3 disks in the six channel Intel ICH10R controller? On channel 1, 3 and 5. Channel 1, 2 and 3 etc... Or doesnt this matter on the performance?

  Read the article

• Regarding compatibility of Intel Pentium D 805 CPU with new motherboard

  - by aniruddhabhide

  I currently have an old configuration with Intel Pentium D 805 CPU and Intel D101GGC chipset. Now I am planning to upgrade my system except CPU and hard disk since it doesn't fit in the budget. QUESTION: I am planning to get Gigabyte GA-B75M-D3H Motherboard which has LGA1155 socket. But my processor has PLGA775 socket type. Will my CPU fit in thee new motherboard's socket? LINKS: CPU specs (Intel site): http://ark.intel.com/products/27511/Intel-Pentium-D-Processor-805-2M-Cache-2_66-GHz-533-MHz-FSB New Motherboard specs (Vendor site): http://www.flipkart.com/gigabyte-ga-b75m-d3h-motherboard/p/itmdacp36gegyeqt?pid=MBDDACP2GUBGFPFM

  Read the article

• High CPU usage on Linux machine

  - by user305210

  I have a piece of java code running on two different machines, but on one of the linux machines, the code uses alot of CPU (close to 100% cpu usage). On the other machine the same code uses less cpu (under 3 to 4%). The machine where cpu usage is high, is a more powerful machine, more CPU and and more memory. This has started happening recently and performance on the machine with high cpu usage has degraded significantly. I am wondering if anyone has any ideas why something like this could happen, possible causes behind this etc. any guesses? No recent changes in hardware were made, no recent code updates... Thank you.

  Read the article

• Separation of memory oriented process and CPU oriented process

  - by Jeevan Dongre

  I am develops guy working for an e-commerce company I am running my e-commerce application built using ruby on rails spree commerce. I am presently running 2 medium instances in the production. One is a high memory instance which has 3.8 RAM and single Core CPU and another one is high CPU instance which has Dual Core CPU. Basically AWS calls it has m1.medium and c1.medium instance respectively. My question is it possible to separate the processes according the cpu intense and memory intense? So that all the cpu intense process can be made run in high cpu instance and all the memory intense process can be made to run in the high memory instances. Is any tool available to identify those process. Kindly give me some heads up. Thank you

  Read the article

• LINQ to SQL : Too much CPU Usage: What happens when there are multiple users.

  - by soldieraman

  I am using LINQ to SQL and seeing my CPU Usage sky rocketting. See below screenshot. I have three questions What can I do to reduce this CPU Usage. I have done profiling and basically removed everything. Will making every LINQ to SQL statement into a compiled query help? I also find that even with compiled queries simple statements like ByID() can take 3 milliseconds on a server with 3.25GB RAM 3.17GHz - this will just become slower on a less powerful computer. Or will the compiled query get faster the more it is used? The CPU Usage (on the local server goes to 12-15%) for a single user will this multiply with the number of users accessing the server - when the application is put on a live server. i.e. 2 users at a time will mean 15*2 = 30% CPU Usage. If this is the case is my application limited to maximum 4-5 users at a time then. Or doesnt LINQ to SQL .net share some CPU usage.

  Read the article

• How to make Unity 3D work with Bumblebee using the Intel chipset

  - by EboMike

  I have a Sony VAIO S laptop with the dreaded Optimus and finally managed to get Bumblebee to work fully on Ubuntu 12.04 so that I can utilize both the hardware acceleration of the Intel chipset as well as the Nvidia one via optirun and/or bumble-app-settings. However, the desktop effects don't work. But they should, I vaguely remember that they worked for a while before I had Bumblebee installed. This is what I get with the support test: :~$ /usr/lib/nux/unity_support_test -p Xlib: extension "NV-GLX" missing on display ":0". OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile OpenGL version string: 1.4 (2.1 Mesa 8.0.2) Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: no GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no First of all, I kind of doubt that the chipset doesn't support VBOs (essentially a standard feature in GL). Neither Xorg.0.log nor Xorg.8.log show any particular errors. As for the Nvidia drivers: In order to get them to work, I had to install the 304.22 drivers (older ones wouldn't work). They clobbered libglx.so, so I reinstated the xserver-xorg-core libglx.so in its original place, moved Nvidia's libglx.so to an nvidia-specific folder and specified that folder in the bumblebee.config. That seems to work and shouldn't cause the problem I see here. For fun, I tried to use the Nvidia chipset for Unity, but that didn't fly either: ~$ optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 640M LE/PCIe/SSE2 OpenGL version string: 4.2.0 NVIDIA 304.22 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no

  Read the article

• Intel 5100 AGN disconnects and then disables my Verizon FiOS Actiontec router

  - by Anthony

  I am a new user (my first trial) of Ubuntu and booted up my Windows Vista laptop up with the Ubuntu CD. I was able to connect wirelessly to my router and stay connected for about a minute. After that it would disconnect and my router would be disabled: none of my other wireless devices would see the signal any longer, as if it disappeared. I would have to cycle the router's power toggle off/on to get it to come back on and put out a signal again. This happened repeatedly. I experienced no other problems trying the software (i.e., accessed my files w/o issue). I did not attempt to connect with an Ethernet cable. Here are the specs on my system: laptop is HP Pavilion dv5 Notebook PC system type is 64-bit operating system CPU is Intel Core 2 Duo P8600 2.4GHz ram is 4 GB network card is Intel WiFi Link 5100 AGN I read elsewhere in this forum that 64-bit systems may not be compatible with Ubuntu. Can anyone help me with this? I'd really like to be able to use this op system.

  Read the article

• Nvidia GeForce Gt-520M-cn on intel dh61ww Ubuntu 12.04

  - by j goseeped

  hi people i hope you can help a little bit , i appreciate your time look: i have a this desktop i7 2600, 8gb ram ddr3, board intel dh61ww, Geforce Nvidia GT520-cn 2Gb ddr3, i just install ubuntu 64bits 12.04 kernel 3.2.0-23-generic , i want to setup two monitors samsung led 22" and get start mi video card 1) i download and installed nvidia driver 295.59 and also try with 302.17 to apt-update and upgrade, apt-get install build-essential linux-headers-$(uname -r), apt-get remove --purge nvidia*, apt-get remove --purge xserver-xorg-video-nouveau, vim /etc/modprobe.d/blacklist.conf blacklist vga16fb blacklist nouveau blacklist rivafb blacklist nvidiafb blacklist rivatv sh NVIDIA.run, sudo service lightdm start, reboot, nvidia-xorgconf 2)after reboot i get 800x600 and nvidia-settings say this. You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server. 3) i change a little bit xorg.conf to set up a resolution to work property 4) i dont have any image in the monito and i dont have any option on Nvidia X server settings lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 520] (rev a1) egrep -i 'glx|nvidia' /var/log/Xorg.0.log [ 12.005] (II) LoadModule: "glx" [ 12.005] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 12.575] (II) Module glx: vendor="NVIDIA Corporation" [ 12.585] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012 [ 12.585] (II) Loading extension GLX [ 13.037] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 13.044] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10) [ 13.044] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9) glxinfo | grep direct Xlib: extension "GLX" missing on display ":0.0". Error: couldn't find RGB GLX visual or fbconfig sorry my english is no very well. and thanks guys

  Read the article

• How can I get CPU load per core in C#?

  - by Intosia

  Hi, How can I get CPU Load per core (quadcore cpu), in C#? Thanks :)

  Read the article

• SQL SERVER – MAXDOP Settings to Limit Query to Run on Specific CPU

  - by pinaldave

  This is very simple and known tip. Query Hint MAXDOP – Maximum Degree Of Parallelism can be set to restrict query to run on a certain CPU. Please note that this query cannot restrict or dictate which CPU to be used, but for sure, it restricts the usage of number of CPUs in a single [...]

  Read the article

• CPU DB like IMDB for Microprocessors

  - by Jason Fitzpatrick

  If you’re interested in the history of microprocessors, the CPU DB at Stanford is a massive database of microprocessors that covers everything from code names to speed to processor families. Play with their visuals or download the entire database and make your own. CPU DB [Stanford.edu] The Best Free Portable Apps for Your Flash Drive Toolkit How to Own Your Own Website (Even If You Can’t Build One) Pt 3 How to Sync Your Media Across Your Entire House with XBMC

  Read the article

• Why is iOS "jailbreaking" CPU specific? [closed]

  - by Ted Wong

  Recently, iOS 6 was "jailbroken" but only on the Apple A4 CPU. Why is the "jailbreaking" process specific to a CPU? From Wikipedia: ... "iOS jailbreaking is the process of removing the limitations imposed by Apple on devices running the iOS operating system through the use of hardware/software exploits – such devices include the iPhone, iPod touch, iPad, and second generation Apple TV. Jailbreaking allows iOS users to gain root access to the operating system""" ...

  Read the article

• SQL SERVER MAXDOP Settings to Limit Query to Run on Specific CPU

  This is very simple and known tip. Query Hint MAXDOP – Maximum Degree Of Parallelism can be set to restrict query to run on a certain CPU. Please note that this query cannot restrict or dictate which CPU to be used, but for sure, it restricts the usage of number of CPUs in a single [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• How to Identify CPU Bottlenecks in SQL Server

  We experience regular slowdowns on our MS SQL database. After analyzing the memory usage we would like to continue the root cause investigation by examining CPU bottlenecks. What is your recommendation to recognize CPU related bottlenecks in SQL Server? Join SQL Backup’s 35,000+ customers to compress and strengthen your backups "SQL Backup will be a REAL boost to any DBA lucky enough to use it." Jonathan Allen. Download a free trial now.

  Read the article

• Battery doesn't charge on high cpu load

  - by bhappy

  When my cpu load rises the battery stop working I don't know why i.e If I start playing a game such as counter strike source the battery won't change unless i minimize the window which brings the load down Can someone please help me with this issue Note: sometimes when flash lags for a sec it shows discharging and charging again also due to high cpu load My laptop is a sony vaio F series 127FD model Thanks

  Read the article

• High Apache CPU usage, but low nginx - Configured correctly?

  - by Buckers

  We've just moved a website of ours over to a brand new high-spec Linux server (1x Intel Xeon E3-1230 v2 @ 3.30GHz, 8GB DDR3 ECC, 2x 128GB SATA SSD RAID1). The server has been configured to use nginx but we're not sure if its working correctly. The site always loads very fast to us (http://www.onedirection.net), but Plesk often sends us reports that the Apache CPU usage percentage reaches high leves, yet when we look at the nginx percentage it's always very low. We've come from a Windows background so are very new to Linux, but shouldn't nginx run INSTEAD of apache? Here's a screenshot from Plesk showing the CPU usage: http://www.pixelkicks.co.uk/_download/plesk.JPG The website gets around 20,000 visitors per day, and we use W3 Total Cache to get it running as fast as possible. MySQL has been optimised well. Memory usage is only running at 2GB of the 8GB. Does this look right? How can we tell that nginx is doing most of the work? Thanks, Chris.

  Read the article

• How could Load average numbers from 'htop' exceed 100% CPU utlization?

  - by Joe Huang

  I use 'htop' to monitor my web server. It's recently quite loaded and the Load average is showing something like this: Load average: 3.10 2.56 1.63 I searched the web about these numbers and I found an article about it: http://blog.scoutapp.com/articles/2009/07/31/understanding-load-averages In the article, it says if I have 2 CPUs, 2.0 means 100% CPU utilization. And my VPS has two CPUs, so what does 3.1 mean? How could it exceed 100% CPU utilization? And from these numbers, does it mean I should be wary about the loading now? But the performance seems totally fine, and this is a managed VPS, the hosting company has not notified me any warning about it. During day time, Load average always show these high numbers... here is another snapshot while writing. Load average: 3.03 2.77 1.97 Load average: 0.41 1.29 1.60 <---- 5 more minutes later So I am wondering how much room left for this site to grow in current configurations? What kind of proactive actions I should take in advance? I don't want to wait until the server bursts. Thanks.

  Read the article

• My client's solution of a Windows SBS 2011 VM on an Ubuntu host and VirtualBox is pinning the host CPU

  - by Scott Stamp

  Here's my situation, I've got a client hosting two servers (one VM), with the host providing VMware Zimbra, the other Windows Small Business Server 2011. Unfortunately, the person before me had configured this setup as follows. Host: Ubuntu Desktop Edition 10.04 (I know, again, not my choice) running VMware Zimbra 8GB of RAM On-board RAID1 of two 320GB Seagate Barracuda drives for the OS Software RAID5 of four 500GB WD Caviar Black drives on MDADM for bulk storage (sorry, I don't know the model #) A relatively competent quad-core Intel Core i7 CPU from the Nehalem architecture (not suspicious of this as the bottleneck) Guest: Windows Small Business Server 2011 4GB of RAM Host-equivalent CPU allocation VDI file for OS hosted on the on-board RAID, VDI file for storage hosted on the on-board RAID For some reason when running, the VM locks up when sitting nearly idle, and the VirtualBox process reports values of 240%+ in top (how is that even possible?!). Anyone have any ideas or suggestions? I'm totally stumped on this one. Happy to provide whatever logs you'd like to take a look at. Ideally I'd drop VirtualBox and provision this with VMware Workstation, but the client has objected to the (very nominal) costs involved. If hardware needs to be purchased to help, it will be, but we're considering upgrades a last-resort at this time. Thanks in advance! *fingers crossed*

  Read the article

• Windows 7 notebook turn off by itself, how to check if it is due to CPU being too hot?

  - by Jian Lin

  I have a Dell Studio 15 notebook, and it just started turning off by itself yesterday. Could it be that the CPU is too hot? I have had several notebooks before and every one of them I can put them on the bed without any problem. This Dell Studio Notebook, however, seems like have the air / fan outlet pointed outward from the bottom back of the notebook, so I suspect that the air is partially blocked when it is on the bed. Are there Win 7 tools that can monitor the CPU temperature, or will some 3rd party tool be needed? (I try to stick to official tools nowadays). Also, it is running Win 7 Ulitmate, there is actually no utility or background service from Win 7 or from Dell that detects when the temperature is too hot (or 95% near the max), pop out a message box giving a warning and say that the computer will go into sleep mode in 1 minute, but instead just turn off the computer by brute force (cutting out the power) right then and there? Update: it turned off right in front of my eyes -- it is not doing any windows update or anything. just normal use and jooooop, it turned off.

  Read the article

• What is a good motherboard for the Intel i7 series processor?

  - by jasondavis

  I am lost on choosing a good miotherboard at a decent price for my Intel i7-930 CPU. I have read bad things about all of them so far. Issues with RAM not working correctly, Windows not loading with USB keyboards plugged in and all kinds of nightmare stories. Here is my needs. - 6g/b SATA 3 - USB 3.0 - Cheaper is better - Support for up to 24gb of RAM, I will start out with only 12gb though - I will use 64bit v. of Windows 7 so the 4gb RAM limit should not be a problem from my OS - Should be able to boot even if I have a USB keyboard plugged in. If you have experience with a motherboard that meets these specs, please do tell about it. I appreciate any help, I am stuck right now on picking a good board.

  Read the article

• (Win7) Gets stuck with ~1% CPU. Especially with multithreading

  - by meow

  Windows 7 32 bit, up to date, Intel i7 860. (For some reason the company runs 32bit Windows everywhere.) I tried to update all motherboard drivers etc. as far as possible. I have a performance issue with a machine which appears in connection with multithreading (or so I think). As an example (and where I most often see it, but it appears on other programs as well): ProteoWizard is a file conversion tool for mass spectrometry files. I can add a list of files and it will attempt to process up to 8 files in parallel (quadcore x 2 threads/core). If I choose 1 to 6 files, I start the process and it goes straight through. If I have =7 files in the queue, conversion goes to ~20%, then gets stuck for 15 seconds, then continues again, always in "chunks" of a few % before getting stuck again. During the time the process is stuck, CPU is at 1%. RAM is not limiting, it is maybe at 70% or so and not going up. I don't get the same problem on other, even slower machines. The computer gets also stuck at 1% CPU doing nothing on other occasions, but for multithreading it is most frequent. Where should I look for the problem?

  Read the article

• Does Intel Smart Response provide any statistics on the cache usage?

  - by Tom Seddon

  I've set up my Z68-based Core i7 PC with a 60GB SSD dedicated as a Smart Response cache drive. Is there any way I can get any statistics out of it? It would be nice to have some information on how much cache space is actually being used, maybe how much of it was actually accessed recently, and how many reads in general are coming from the SSD rather than from the mechanical disk. These statistics might help to quickly provide some evidence for or against the use of Smart Response, without my having to reinstall Windows on the SSD (etc.) to find out. The Windows ReadyBoost feature has some performance counters you can access via the Windows 7 perfmon tool, for example, which is the kind of thing I'm hoping is somehow available. Smart Response provides no perfmon counters, though, and the Intel Rapid Storage Utility tells you pretty much nothing except that Smart Response is switched on.

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >