Search Results

Search found 2108 results on 85 pages for 'kvm virtualization'.

Page 34/85 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• When I restart my virtual enviorment it does not re-bind to the IP address

  - by RoboTamer

  The IP does no longer respond to a remote ping With restart I mean: lxc-stop -n vm3 lxc-start -n vm3 -f /etc/lxc/vm3.conf -d -- /etc/network/interfaces auto lo iface lo inet loopback up route add -net 127.0.0.0 netmask 255.0.0.0 dev lo down route add -net 127.0.0.0 netmask 255.0.0.0 dev lo # device: eth0 auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 192.22.189.58 netmask 255.255.255.248 gateway 192.22.189.57 broadcast 192.22.189.63 bridge_ports eth0 bridge_fd 0 bridge_hello 2 bridge_maxage 12 bridge_stp off post-up ip route add 192.22.189.59 dev br0 post-up ip route add 192.22.189.60 dev br0 post-up ip route add 192.22.189.61 dev br0 post-up ip route add 192.22.189.62 dev br0 -- /etc/lxc/vm3.conf lxc.utsname = vm3 lxc.rootfs = /var/lib/lxc/vm3/rootfs lxc.tty = 4 #lxc.pts = 1024 # pseudo tty instance for strict isolation lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.mtu = 1500 #lxc.cgroup.cpuset.cpus = 0 # security parameter lxc.cgroup.devices.deny = a # Deny all access to devices lxc.cgroup.devices.allow = c 1:3 rwm # dev/null lxc.cgroup.devices.allow = c 1:5 rwm # dev/zero lxc.cgroup.devices.allow = c 5:1 rwm # dev/console lxc.cgroup.devices.allow = c 5:0 rwm # dev/tty lxc.cgroup.devices.allow = c 4:0 rwm # dev/tty0 lxc.cgroup.devices.allow = c 4:1 rwm # dev/tty1 lxc.cgroup.devices.allow = c 4:2 rwm # dev/tty2 lxc.cgroup.devices.allow = c 1:9 rwm # dev/urandon lxc.cgroup.devices.allow = c 1:8 rwm # dev/random lxc.cgroup.devices.allow = c 136:* rwm # dev/pts/* lxc.cgroup.devices.allow = c 5:2 rwm # dev/pts/ptmx lxc.cgroup.devices.allow = c 254:0 rwm # rtc # mounts point lxc.mount.entry=proc /var/lib/lxc/vm3/rootfs/proc proc nodev,noexec,nosuid 0 0 lxc.mount.entry=devpts /var/lib/lxc/vm3/rootfs/dev/pts devpts defaults 0 0 lxc.mount.entry=sysfs /var/lib/lxc/vm3/rootfs/sys sysfs defaults 0 0

  Read the article

• why does Virtualbox use 15-20% CPU when VM is paused?

  - by laramichaels

  Hello, I run VirtualBox 3.1 on Ubuntu with a Win XP guest. I have noticed to my surprise that when I pause the VM (its screen grays out) VirtualBox continues using 15-20% of the host's CPU. Is this normal behavior? Is there a way to avoid it? (Without saving the state of the VM and exiting VirtualBox.) Thanks for any insights! ~lara

  Read the article

• "domain crashed" when creating new Xen instance

  - by user47650

  I have downloaded a Xen virtual machine image from the appscale project, and I am trying to start it up. However once I run the command; xm create -c -f xen.conf The instance immediately crashes and provides no console output. however it produces logs that I have posted below. but this is the error; [2011-03-01 12:34:03 xend.XendDomainInfo 3580] WARNING (XendDomainInfo:1178) Domain has crashed: name=appscale-1.4b id=10. I have managed to mount the root.img file locally and verify that it is actually an ext3 file system. I am running Xen 3.0.3 that is a stock RPM from the CentOS 5 repos; # rpm -qa | grep -i xen xen-libs-3.0.3-105.el5_5.5 xen-3.0.3-105.el5_5.5 xen-libs-3.0.3-105.el5_5.5 kernel-xen-2.6.18-194.32.1.el5 any suggestions on how to proceed with troubleshooting? (i am a newbie to Xen) so far I have enabled console logging, but the log file is empty. ==> domain-builder-ng.log <== xc_dom_allocate: cmdline=" ip=:1.2.3.4::::eth0:dhcp root=/dev/sda1 ro xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console", features="" xc_dom_kernel_file: filename="/boot/vmlinuz-2.6.27-7-server" xc_dom_malloc_filemap : 2284 kB xc_dom_ramdisk_file: filename="/boot/initrd.img-2.6.27-7-server" xc_dom_malloc_filemap : 9005 kB xc_dom_boot_xen_init: ver 3.1, caps xen-3.0-x86_64 xen-3.0-x86_32p xc_dom_parse_image: called xc_dom_find_loader: trying ELF-generic loader ... failed xc_dom_find_loader: trying Linux bzImage loader ... xc_dom_malloc : 9875 kB xc_dom_do_gunzip: unzip ok, 0x234bb2 -> 0x9a4de0 OK elf_parse_binary: phdr: paddr=0x200000 memsz=0x447000 elf_parse_binary: phdr: paddr=0x647000 memsz=0xab888 elf_parse_binary: phdr: paddr=0x6f3000 memsz=0x908 elf_parse_binary: phdr: paddr=0x6f4000 memsz=0x1c2f9c elf_parse_binary: memory: 0x200000 -> 0x8b6f9c elf_xen_parse_note: GUEST_OS = "linux" elf_xen_parse_note: GUEST_VERSION = "2.6" elf_xen_parse_note: XEN_VERSION = "xen-3.0" elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 elf_xen_parse_note: ENTRY = 0xffffffff8071e200 elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80209000 elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" elf_xen_parse_note: PAE_MODE = "yes" elf_xen_parse_note: LOADER = "generic" elf_xen_parse_note: unknown xen elf note (0xd) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 elf_xen_parse_note: PADDR_OFFSET = 0x0 elf_xen_addr_calc_check: addresses: virt_base = 0xffffffff80000000 elf_paddr_offset = 0x0 virt_offset = 0xffffffff80000000 virt_kstart = 0xffffffff80200000 virt_kend = 0xffffffff808b6f9c virt_entry = 0xffffffff8071e200 xc_dom_parse_elf_kernel: xen-3.0-x86_64: 0xffffffff80200000 -> 0xffffffff808b6f9c xc_dom_mem_init: mem 1024 MB, pages 0x40000 pages, 4k each xc_dom_mem_init: 0x40000 pages xc_dom_boot_mem_init: called x86_compat: guest xen-3.0-x86_64, address size 64 xc_dom_malloc : 2048 kB ==> xend.log <== [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:02 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2114) UUID Created: True [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2115) Devices to release: [], domid = 9 [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2127) Releasing PVFB backend devices ... [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:207) XendDomainInfo.create(['domain', ['domid', 9], ['uuid', 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0'], ['vcpus', 1], ['vcpu_avail', 1], ['cpu_cap', 0], ['cpu_weight', 256], ['memory', 1024], ['shadow_memory', 0], ['maxmem', 1024], ['features', ''], ['name', 'appscale-1.4b'], ['on_poweroff', 'destroy'], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['image', ['linux', ['kernel', '/boot/vmlinuz-2.6.27-7-server'], ['ramdisk', '/boot/initrd.img-2.6.27-7-server'], ['ip', ':1.2.3.4::::eth0:dhcp'], ['root', '/dev/sda1 ro'], ['args', 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console']]], ['cpus', []], ['device', ['vif', ['backend', 0], ['script', 'vif-bridge'], ['mac', '00:16:3B:72:10:E4']]], ['device', ['vbd', ['backend', 0], ['dev', 'sda1:disk'], ['uname', 'file:/local/xen/domains/appscale1.4/root.img'], ['mode', 'w']]], ['state', '----c-'], ['shutdown_reason', 'crash'], ['cpu_time', 0.000339131], ['online_vcpus', 1], ['up_time', '0.952092885971'], ['start_time', '1299011639.92'], ['store_mfn', 1169289], ['console_mfn', 1169288]]) [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:329) parseConfig: config is ['domain', ['domid', 9], ['uuid', 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0'], ['vcpus', 1], ['vcpu_avail', 1], ['cpu_cap', 0], ['cpu_weight', 256], ['memory', 1024], ['shadow_memory', 0], ['maxmem', 1024], ['features', ''], ['name', 'appscale-1.4b'], ['on_poweroff', 'destroy'], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['image', ['linux', ['kernel', '/boot/vmlinuz-2.6.27-7-server'], ['ramdisk', '/boot/initrd.img-2.6.27-7-server'], ['ip', ':1.2.3.4::::eth0:dhcp'], ['root', '/dev/sda1 ro'], ['args', 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console']]], ['cpus', []], ['device', ['vif', ['backend', 0], ['script', 'vif-bridge'], ['mac', '00:16:3B:72:10:E4']]], ['device', ['vbd', ['backend', 0], ['dev', 'sda1:disk'], ['uname', 'file:/local/xen/domains/appscale1.4/root.img'], ['mode', 'w']]], ['state', '----c-'], ['shutdown_reason', 'crash'], ['cpu_time', 0.000339131], ['online_vcpus', 1], ['up_time', '0.952092885971'], ['start_time', '1299011639.92'], ['store_mfn', 1169289], ['console_mfn', 1169288]] [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:446) parseConfig: result is {'features': '', 'image': ['linux', ['kernel', '/boot/vmlinuz-2.6.27-7-server'], ['ramdisk', '/boot/initrd.img-2.6.27-7-server'], ['ip', ':1.2.3.4::::eth0:dhcp'], ['root', '/dev/sda1 ro'], ['args', 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console']], 'cpus': [], 'vcpu_avail': 1, 'backend': [], 'uuid': 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0', 'on_reboot': 'restart', 'cpu_weight': 256.0, 'memory': 1024, 'cpu_cap': 0, 'localtime': None, 'timer_mode': None, 'start_time': 1299011639.9200001, 'on_poweroff': 'destroy', 'on_crash': 'restart', 'device': [('vif', ['vif', ['backend', 0], ['script', 'vif-bridge'], ['mac', '00:16:3B:72:10:E4']]), ('vbd', ['vbd', ['backend', 0], ['dev', 'sda1:disk'], ['uname', 'file:/local/xen/domains/appscale1.4/root.img'], ['mode', 'w']])], 'bootloader': None, 'maxmem': 1024, 'shadow_memory': 0, 'name': 'appscale-1.4b', 'bootloader_args': None, 'vcpus': 1, 'cpu': None} [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1784) XendDomainInfo.construct: None [2011-03-01 12:34:02 xend 3580] DEBUG (balloon:145) Balloon: 3034420 KiB free; need 4096; done. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1953) XendDomainInfo.initDomain: 10 256.0 [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1994) _initDomain:shadow_memory=0x0, maxmem=0x400, memory=0x400. [2011-03-01 12:34:02 xend 3580] DEBUG (balloon:145) Balloon: 3034412 KiB free; need 1048576; done. [2011-03-01 12:34:02 xend 3580] INFO (image:139) buildDomain os=linux dom=10 vcpus=1 [2011-03-01 12:34:02 xend 3580] DEBUG (image:208) domid = 10 [2011-03-01 12:34:02 xend 3580] DEBUG (image:209) memsize = 1024 [2011-03-01 12:34:02 xend 3580] DEBUG (image:210) image = /boot/vmlinuz-2.6.27-7-server [2011-03-01 12:34:02 xend 3580] DEBUG (image:211) store_evtchn = 1 [2011-03-01 12:34:02 xend 3580] DEBUG (image:212) console_evtchn = 2 [2011-03-01 12:34:02 xend 3580] DEBUG (image:213) cmdline = ip=:1.2.3.4::::eth0:dhcp root=/dev/sda1 ro xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console [2011-03-01 12:34:02 xend 3580] DEBUG (image:214) ramdisk = /boot/initrd.img-2.6.27-7-server [2011-03-01 12:34:02 xend 3580] DEBUG (image:215) vcpus = 1 [2011-03-01 12:34:02 xend 3580] DEBUG (image:216) features = ==> domain-builder-ng.log <== xc_dom_build_image: called xc_dom_alloc_segment: kernel : 0xffffffff80200000 -> 0xffffffff808b7000 (pfn 0x200 + 0x6b7 pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x200+0x6b7 at 0x2aaaab5f6000 elf_load_binary: phdr 0 at 0x0x2aaaab5f6000 -> 0x0x2aaaaba3d000 elf_load_binary: phdr 1 at 0x0x2aaaaba3d000 -> 0x0x2aaaabae8888 elf_load_binary: phdr 2 at 0x0x2aaaabae9000 -> 0x0x2aaaabae9908 elf_load_binary: phdr 3 at 0x0x2aaaabaea000 -> 0x0x2aaaabb9a004 xc_dom_alloc_segment: ramdisk : 0xffffffff808b7000 -> 0xffffffff82382000 (pfn 0x8b7 + 0x1acb pages) xc_dom_malloc : 160 kB xc_dom_pfn_to_ptr: domU mapping: pfn 0x8b7+0x1acb at 0x2aaab0000000 xc_dom_do_gunzip: unzip ok, 0x8cb5e7 -> 0x1aca210 xc_dom_alloc_segment: phys2mach : 0xffffffff82382000 -> 0xffffffff82582000 (pfn 0x2382 + 0x200 pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x2382+0x200 at 0x2aaab1acb000 xc_dom_alloc_page : start info : 0xffffffff82582000 (pfn 0x2582) xc_dom_alloc_page : xenstore : 0xffffffff82583000 (pfn 0x2583) xc_dom_alloc_page : console : 0xffffffff82584000 (pfn 0x2584) nr_page_tables: 0x0000ffffffffffff/48: 0xffff000000000000 -> 0xffffffffffffffff, 1 table(s) nr_page_tables: 0x0000007fffffffff/39: 0xffffff8000000000 -> 0xffffffffffffffff, 1 table(s) nr_page_tables: 0x000000003fffffff/30: 0xffffffff80000000 -> 0xffffffffbfffffff, 1 table(s) nr_page_tables: 0x00000000001fffff/21: 0xffffffff80000000 -> 0xffffffff827fffff, 20 table(s) xc_dom_alloc_segment: page tables : 0xffffffff82585000 -> 0xffffffff8259c000 (pfn 0x2585 + 0x17 pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x2585+0x17 at 0x2aaab1ccb000 xc_dom_alloc_page : boot stack : 0xffffffff8259c000 (pfn 0x259c) xc_dom_build_image : virt_alloc_end : 0xffffffff8259d000 xc_dom_build_image : virt_pgtab_end : 0xffffffff82800000 xc_dom_boot_image: called arch_setup_bootearly: doing nothing xc_dom_compat_check: supported guest type: xen-3.0-x86_64 <= matches xc_dom_compat_check: supported guest type: xen-3.0-x86_32p xc_dom_update_guest_p2m: dst 64bit, pages 0x40000 clear_page: pfn 0x2584, mfn 0x11d788 clear_page: pfn 0x2583, mfn 0x11d789 xc_dom_pfn_to_ptr: domU mapping: pfn 0x2582+0x1 at 0x2aaab1ce2000 start_info_x86_64: called setup_hypercall_page: vaddr=0xffffffff80209000 pfn=0x209 domain builder memory footprint allocated malloc : 12139 kB anon mmap : 0 bytes mapped file mmap : 11289 kB domU mmap : 35 MB arch_setup_bootlate: shared_info: pfn 0x0, mfn 0xd6fe1 shared_info_x86_64: called vcpu_x86_64: called vcpu_x86_64: cr3: pfn 0x2585 mfn 0x11d787 launch_vm: called, ctxt=0x97b21f8 xc_dom_release: called ==> xend.log <== [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:114) DevController: writing {'mac': '00:16:3B:72:10:E4', 'handle': '0', 'protocol': 'x86_64-abi', 'backend-id': '0', 'state': '1', 'backend': '/local/domain/0/backend/vif/10/0'} to /local/domain/10/device/vif/0. [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:116) DevController: writing {'domain': 'appscale-1.4b', 'handle': '0', 'script': '/etc/xen/scripts/vif-bridge', 'state': '1', 'frontend': '/local/domain/10/device/vif/0', 'mac': '00:16:3B:72:10:E4', 'online': '1', 'frontend-id': '10'} to /local/domain/0/backend/vif/10/0. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:634) Checking for duplicate for uname: /local/xen/domains/appscale1.4/root.img [file:/local/xen/domains/appscale1.4/root.img], dev: sda1:disk, mode: w [2011-03-01 12:34:02 xend 3580] DEBUG (blkif:27) exception looking up device number for sda1:disk: [Errno 2] No such file or directory: '/dev/sda1:disk' [2011-03-01 12:34:02 xend 3580] DEBUG (blkif:27) exception looking up device number for sda1: [Errno 2] No such file or directory: '/dev/sda1' [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:114) DevController: writing {'virtual-device': '2049', 'device-type': 'disk', 'protocol': 'x86_64-abi', 'backend-id': '0', 'state': '1', 'backend': '/local/domain/0/backend/vbd/10/2049'} to /local/domain/10/device/vbd/2049. [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:116) DevController: writing {'domain': 'appscale-1.4b', 'frontend': '/local/domain/10/device/vbd/2049', 'format': 'raw', 'dev': 'sda1', 'state': '1', 'params': '/local/xen/domains/appscale1.4/root.img', 'mode': 'w', 'online': '1', 'frontend-id': '10', 'type': 'file'} to /local/domain/0/backend/vbd/10/2049. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:993) Storing VM details: {'shadow_memory': '0', 'uuid': 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0', 'on_reboot': 'restart', 'start_time': '1299011642.74', 'on_poweroff': 'destroy', 'name': 'appscale-1.4b', 'xend/restart_count': '0', 'vcpus': '1', 'vcpu_avail': '1', 'memory': '1024', 'on_crash': 'restart', 'image': "(linux (kernel /boot/vmlinuz-2.6.27-7-server) (ramdisk /boot/initrd.img-2.6.27-7-server) (ip :1.2.3.4::::eth0:dhcp) (root '/dev/sda1 ro') (args 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console'))", 'maxmem': '1024'} [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1028) Storing domain details: {'console/ring-ref': '1169288', 'console/port': '2', 'name': 'appscale-1.4b', 'console/limit': '1048576', 'vm': '/vm/d5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0', 'domid': '10', 'cpu/0/availability': 'online', 'memory/target': '1048576', 'store/ring-ref': '1169289', 'store/port': '1'} [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:158) Waiting for devices vif. [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:164) Waiting for 0. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1250) XendDomainInfo.handleShutdownWatch [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vif/10/0/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vif/10/0/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:523) hotplugStatusCallback 1. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices usb. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vbd. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:164) Waiting for 2049. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vbd/10/2049/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vbd/10/2049/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:523) hotplugStatusCallback 1. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices irq. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vkbd. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vfb. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices pci. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices ioports. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices tap. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vtpm. [2011-03-01 12:34:03 xend.XendDomainInfo 3580] WARNING (XendDomainInfo:1178) Domain has crashed: name=appscale-1.4b id=10. [2011-03-01 12:34:03 xend.XendDomainInfo 3580] ERROR (XendDomainInfo:2654) VM appscale-1.4b restarting too fast (2.275545 seconds since the last restart). Refusing to restart to avoid loops. [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2189) XendDomainInfo.destroy: domid=10 ==> xen-hotplug.log <== Nothing to flush. ==> xend.log <== [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2114) UUID Created: True [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2115) Devices to release: [], domid = 10 [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2127) Releasing PVFB backend devices ... And this is the xen.conf file that I am using; # cat xen.conf # Configuration file for the Xen instance AppScale, created # bn VMBuilder kernel = '/boot/vmlinuz-2.6.27-7-server' ramdisk = '/boot/initrd.img-2.6.27-7-server' memory = 1024 vcpus = 1 root = '/dev/sda1 ro' disk = [ 'file:/local/xen/domains/appscale1.4/root.img,sda1,w', ] name = 'appscale-1.4b' dhcp = 'dhcp' vif = [ 'mac=00:16:3B:72:10:E4' ] on_poweroff = 'destroy' on_reboot = 'restart' on_crash = 'restart' extra = 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console'

  Read the article

• How to run a Turnkey Linux virtual machine on XenServer?

  - by Jader Dias

  Turnkey Linux distributes Linux virtual machines in a Xen compatible format. I have a XenServer instance running and I would like to run a recently downloaded Turnkey Linux virtual machine on it. But I have never used XenServer before. Can you point me a tutorial specific for this case, since the manual doens't seem to cover it very well?

  Read the article

• VSFTPD does not allow upload with virtual users

  - by Mr. Squig

  I am attempting to setup VSFTPD with virtual users on a server running Ubuntu 12.04. I have configured the server to allow for virtual users to login, but I am having trouble getting it to allow uploads. My vsftpd.conf is as follows: listen=YES anonymous_enable=NO local_enable=YES write_enable=YES local_umask=022 anon_upload_enable=YES dirmessage_enable=YES use_localtime=YES xferlog_enable=YES connect_from_port_20=YES chroot_local_user=YES virtual_use_local_privs=YES guest_enable=YES guest_username=virtual user_sub_token=$USER local_root=/var/www/$USER hide_ids=YES secure_chroot_dir=/var/run/vsftpd/empty pam_service_name=vsftpd rsa_cert_file=/etc/ssl/private/vsftpd.pem /etc/pam.d/vsftpd contains: auth required pam_pwdfile.so pwdfile /etc/vsftpd.passwd crypt=hash account required pam_permit.so crypt=hash I have two virtual users set up, one of which has the same name as a local user. They each have a directory in /var/www/ owned by 'virtual'. As I understand it, when a virtual user logs in this way they will appear to the system as the user virtual. Using this configuration user can log on, but cannot upload files. The error given in /var/log/vsftpd.log is: Tue Nov 20 19:49:00 2012 [pid 2] CONNECT: Client "96.233.116.53" Tue Nov 20 19:49:07 2012 [pid 1] [zac] OK LOGIN: Client "96.233.116.53" Tue Nov 20 19:49:11 2012 [pid 2] CONNECT: Client "96.233.116.53" Tue Nov 20 19:49:11 2012 [pid 1] [zac] OK LOGIN: Client "96.233.116.53" Tue Nov 20 19:49:11 2012 [pid 3] [zac] FAIL CHMOD: Client "96.233.116.53", "/test.ppm 644" I have tried changing the permissions of these directories in all sorts of ways, but nothing seem to work. I have a feeling that it is something simple related to permissions. Any ideas?

  Read the article

• How to access programs in one PC using another PC

  - by darkstar13

  Hi, I was recently given an old PC for my remote access at work. The CPU that comes with it has Windows XP installed, 400+ MB of ram, all USB devices disabled. I access my work applications using VPN / Citrix. Basically, it' sooooo slow. Plus it's bulky and it will just occupy space, so I am now hoping to find a way for me to integrate this work PC with my home PC. I tried to put in the hard drive in my home PC CPU, and set the drive as slave. However, when I booted my PC from this hard drive, I am stuck at the screen where windows is prompting me to select how am I going to boot (ex. Safe Mode, Safe mode with command prompt, Last Working Configuration, etc), but whatever option I select, I am still stuck at this option after reboot. I am thinking if maybe I can clone the drive and mount the cloned drive and access the system as a virtual machine. But I don't know if that will work. I would like to know if there's something I can do so I can work at home using my home PC, where I can access my work programs to connect to VPN / Citrix. My home PC's OS is Windows 7 Ultimate x64.

  Read the article

• Accessing apache in ubuntu 10 virtualbox guest from ubuntu 10 host

  - by Francis L

  I did the following: installed VirtualBox 3.1.6 OSE in ubuntu 10 desktop. installed ubuntu 10 server on a virtual machine in VirtualBox. select "LAMP server" and "OpenSSH server" options during the ubuntu server installation. leave network "adapter 1" of virtual machine as "NAT". use "VBoxManage" described in manual to setup port forwarding on the host (Protocol: TCP, GuestPort: 80, HostPort: 8080). verify "ExtraDataItem" have been added to "ubuntuServer1.xml" (my virtual machine name) correctly. run command "pgrep apache" in ubuntu server in virtual machine to ensure apache is running. Everything went well. But, when I try to access the apache from the browser on the host with "http://localhost:8080/", it just continue fetching with no response. Now, I'm struck! Please help! Many many thanks in advance!

  Read the article

• ESXi 4.1 CentOS 6.X eth0 unnavailable

  - by L.K.

  I don't usually ask for help so directly, usually google have all i need but this time i'm seriously lost. Hope you can help me .s The thing is, i have a server with Vmware ESXi 4.1 and 5 already running and configured virtual servers, but whenever i try to make a new one on CentOS 6.X it leaves me without eth0 to be activated in any way. When installing CentOS, in the screen of localhost.localdomain i try by the button in the left down corner of the screen to make eth0 connect automatically but it tells me a NetworkManager Error: cannot start eth0. So...in command line once the CentOS is already installed, i have configured ifcfg-eth0 and manually tried to take up the eth0 but when i restart network service "Bringing up eth0: Failed" and sometimes even "shutting down eth0: Failed" Thanks in advance

  Read the article

• BSOD trying to migrate Windows XP from a physical to a virtual machine

  - by pauldoo

  I am attempting to migrate a Windows XP Home installation from a physical machine to a virtual machine. The physical machine has two hard disks; the first is 250GB containing the "C:", the second is 1TB containing "D:". I'd like to create a new virtual machine stored on the D:, which is a copy of the Windows XP Home installation that is currently on the C:. (This will leave the 250GB drive clear for me to install a fresh copy of Windows 7, and still be able to access the old XP installation if necessary.) The first method I tried was to follow the instructions here: http://www.virtualbox.org/wiki/Migrate_Windows I booted up from an Ubuntu Live CD in order to execute the Linux commands whilst the Windows system wasn't running. With this method the virtual machine would always blue screen on startup with a "STOP 0x0000007B" message. The instructions above say to try a "repair install" using the Windows XP disc. Unfortunately for me my XP disc is scratched and will not boot so I was unable to try a repair install. The second method I tried was to use "VMWare Converter Standalone Client". This tool executed without any errors, but again produced a virtual machine that blue screens on startup with the same "STOP" message. Are there any other methods to move the Windows XP installation into a virtual machine? I think next I will try some more manual process to create the cloned virtual machine. I think I will try installing a fresh copy of Windows XP to a virtual machine, then once that is booting OK I will ntfsclone the source C: partition over the top. Perhaps this will fix the booting problems if the issue is related to the MBR or partition table in some way.

  Read the article

• 0x0000007b WinXP in VirtualBox with no Admin access on source drive

  - by Ozzah

  I have a physical drive with an installation of WinXP-32 which I have made a clone of using SysInternals disk2vhd. I have no admin rights on this installation. I have tried to boot this VHD in VirtualBox, however it blue screens on 0x0000007b. I have researched this and apparently the cause is that Windows doesn't like the IDE controller changing. I have tried all the available controllers in VirtualBox, but they all produce the same result. There is a Microsoft KB article which describes a method involving loading a .reg file and extracting some sys files from a CAB. This method apparently works well for many people with this problem, however it will not work for me as I don't have admin rights on the WinXP installation. Is there anything I can do in this case? Is there any way of loading the .reg file outside the OS? or perhaps doing a repair using the WinXP CD? Even though I have no admin rights on the source drive installation of Windows, I do obviously have full access to the file system directly on the drive and also in the VHD itself.

  Read the article

• How to monitor CPU usage and performance on a Hyper-V server with several VM's

  - by Bjørn

  Hello, I have a server that is running Windows 2008 64 bit Hyper-V, with 8 gigs of RAM and Intel Xeon X3440 @ 2.53 Ghz, which gives me 8 logical cores in the performance monitor on the host system. I have set up three Virtual Machines, all running Windows 2008 32 bit. Build server, running Team City Staging server SQL Server, running SQL Server 2005 I have some troubles with the setup in that the host monitor remains responsive at all times, even though the VM's are seemingly working at 100% cpu and are very sluggish and unresponsive. (I have asked a separate question about that.) So the question here is: What is the best way to monitor how the physical CPU's are actually utilized? The reason I am asking is that I am being told that i cannot reliably use the task manager to monitor CPU usage in a VM.

  Read the article

• VMWare-Mount not recognizing virtual disks

  - by user36175

  I have two disks as .vmdk files, and four as .vdi files. I can boot virtual machines on them with Sun xMV VirtualBox, and they work just fine. However, I want to mount them on my local computer so I can read some files off of them without starting a virtual machine. I downloaded the vmware-mount utility, but I get this error, even when mounting .vmdk files, which should be VMWare images... Unable to mount the virtual disk. The disk may be in use by a virtual machine, may not have enough volumes or mounted under another drive letter. If not, verify that the file is a valid virtual disk file. Thinking it's a problem with the utility, I downloaded the SDK and made my own simple program in C to try to mount a disk. It just initializes the API, connects to it, then attempts to open the disk. I get this error, once again claiming it is not a virtual disk: **LOG: DISKLIB-DSCPTR: descriptor above max size: I64u **LOG: DISKLIB-LINK : "f:\programming\VMs\windowstrash.vdi" : failed to open (The file specified is not a virtual disk). **LOG: DISKLIB-CHAIN : "f:\programming\VMs\windowstrash.vdi" : failed to open (The file specified is not a virtual disk). **LOG: DISKLIB-LIB : Failed to open 'f:\programming\VMs\windowstrash.vdi' with flags 0x1e (The file specified is not a virtual disk). ** FAILURE ** : The file specified is not a virtual disk The files are clearly virtual disks, though, since I can actually mount and use them with a virtual machine. I tried detaching them from any VMs and trying again, but I got the same results. Any ideas? Maybe the "descriptor above max size" is a hint? Some more info: the .vmdk disks were created on other computers. I just copied them to mine and created new VMs around them, but they work fine. All the .vdi files were created on my machine. Not sure if that affects anything. Update: WinMount can mount the file.. so the problem seems to be with vmware-mount.

  Read the article

• My HiperV Virtual Server stops with critical error.

  - by Svisstack

  Hello, I have problem with my HyperV virtual server, he minute after start was stopping with critical error. Where in the system i can find more information about this error?

  Read the article

• links for 2010-05-05

  - by Bob Rhubart

  MASON Multiagent Simulation Toolkit on the NetBeans Platform Geertjan shares his recent work with George Mason University's Java-based multiagent simulation library core. (tags: java oracle netbeans) Slides: Oracle Virtualization: Making Software Easier to Deploy, Manage, and Support Slides from a presentation by Dean Samuels and Nirmal Grewal. (tags: oracle otn architect virtualization) @mayureshnirhali: Virtualizing Your Applications - Oracle Tech Days - Hyderbad 2010 Mayuresh Nirhali shares a video of his session describing support for various Virtualization technologies on the Oracle Solaris platform. (tags: oracle otn solaris virtualization)

  Read the article

• "A disk read error occurred" when booting XP disk image in VirtualBox

  - by intuited

  I'm trying to boot an XP installation cloned into VirtualBox from a real drive. I'm getting the message A disk read error occurred Press Ctrl+Alt+Del to restart whenever* I try to boot the machine. * This is not strictly true: with AMD-V enabled, the boot process appears to not make it this far and instead hangs at a black screen with cursor. I created the VirtualBox image from the original drive using the following method: $ sudo ddrescue -n /dev/sdd sdd.img logfile # completed without errors $ VBoxManage convertfromraw sdd.img disk.vdi The original disk (and the image) contain a single NTFS partition with XP installed on it. The owner of the drive indicates that it did boot okay the last time the system made it that far. The (Pentium 4) system has a broken (enormous) heat sink, so at some point it failed to boot because it would quickly overheat and shut down. If I boot the VM from a live cd, I am able to mount its /dev/sda1 without any problems. I ran ntfsfix and didn't have any luck. I've read through the instructions on doing this. I didn't really follow them. For example, I didn't run MergeIDE before imaging because the machine was not bootable. However, the symptom of that problem seems to be quite different. The emitted message is contained in the volume boot record of the XP partition, which leads me to suspect that this is a problem with the core operating system bootstrap procedure, and not related to anything in the registry. I don't have an XP boot CD.

  Read the article

• Installing Fedora 11 fIlesystem from ISO in to a VM image

  - by okhalid

  Hi, I need to install Fedora 11 in my monitor-less linux box which is running some where in a data center. I will use Fedora 11 as a virtual machine. What I already know/have: 1) How to create LVM partitions and create ext3 filesystem 2) Mount the LVM partition and ISO image 3) Run the partition with Xen as a virtual machine What I need: 1) I need to install Fedora ll file system into an lvm partition (let's say /dev/fedora11) from an ISO image so that I have all the directories /root, /bin, /sys etc etc under /dev/fedora11 Any help would be much appreciated! NOTE: I don't have a monitor for this server, so I need to do it via SSH

  Read the article

• CPU's on Hyper-V host system is just idling, even though VM's are at full throttle

  - by Bjørn

  Hello, I have a server that is running Windows 2008 64 bit Hyper-V, with 8 gigs of RAM and Intel Xeon X3440 @ 2.53 Ghz, which gives me 8 logical cores in the performance monitor on the host system. I have set up three Virtual Machines, all running Windows 2008 32 bit. Build server, running Team City Staging server SQL Server, running SQL Server 2005 These three machines are running very sluggishly, they are at 100% cpu even though the host system is barely using any cpu at all, typically below 10% total. Could anyone please give some tips as to the best setup for CPU allocating? Should I have set each server to have two cores, or should I increase this number above the total number of cores on the host? What is a good number to set on the Virtual Machine Reserve and Virtual Machine Limit? Is 8 gigs of physical RAM insufficient for 3 VM's? Thanks for reading. :)

  Read the article

• Speedup vmware esx guest hdd access

  - by Uwe

  Hello, we run several windows servers and windows clients on our vmware esx. One of the Windows 2003 Servers is a build-server with major HDD-reads/writes. as it is our build server. This machine was a hardware before and was virtualized to the ESX. Is there any way to increase the HDD-Performance? Perhaps there are special windows (guest) drivers? The files are stored on a Raid6 base. Performance graph of vmware infrastructure client shows reads up to 650 KBps and writes up to 4000 KBps. Thank you. Regards, Uwe

  Read the article

• Need clear steps on how to convert a Windows 2000 Server to a XenServer VM

  - by Jay

  The source system is not local. The target host running XenServer is not local. The source system is running Windows 2000 Server SP4 and has 1 disk split into 6 partitions, all NTFS: C: 6 GB (boot) D: 15 GB E: 6 GB F: 6 GB G: 5 GB H: 26 GB Most of the partitions are mostly mostly full ( 60%). What is the most straightforward way to do a P2V migration of the server? I can do minor database & data syncs after the P2V is successful & running as a VM within XenServer, it's just getting to that point which is not clear. The option of installing a Windows 2000 Server from scratch is not available, I need to convert the existing physical server as-is into a VM to be hosted within a XenServer environment. I've looked at XenConvert but it maxes out on converting only 4 partitions in one shot, and I'm not certain how to account for the 2 extra partitions. I'm not familiar with XenServer but it's my only option right now to go P2V.

  Read the article

• Trying to run QEMU with a file as hda

  - by Felix

  I'm trying to run QEMU and use a simple file on the host system as the guest's hard drive. Here's what I attempted so far: $ dd if=/dev/zero of=/home/felix/vm/archlinux.img bs=1MB count=8192 8192+0 records in 8192+0 records out 8192000000 bytes (8.2 GB) copied, 86.6054 s, 94.6 MB/s $ qemu -hda /home/felix/vm/archlinux.img -cdrom archlinux-2009.08-netinstall-i686.iso -boot d Then I try to install Archlinux to that file. It goes pretty well (it's able to format it from what I can tell) until I start installing packages, when I get errors like this: And, of course, everything goes downhill from there (unable to mount the partition, corrupted files, ...). What am I doing wrong? Note: I'm just doing this for entertainment purposes. I don't intend to actually use this on servers or anything. The only use I can think of for this kind of installation would be to actually get an 8GB USB stick and dd that file to it and wham! You have a bootable stick with a fully fledged and customized OS, and without torturing the stick through the installation.

  Read the article

• Getting Server 2008 R2 to ignore all traffic from Internet-facing NIC, leaving it to a VM

  - by Wolvenmoon

  I got in to Server 2008 R2 via Dreamspark and would like to start learning on it. I don't have much option but to put it on a system sitting between the Internet and my home LAN due to electricity bills and the fact that 3 computers in an 11x11 space in 102 degree weather is pretty stygian. Currently I use a ClearOS gateway to manage everything, what I'd like to do is take my server 2008 R2 box, which has two NICs, and drop it at the head of my network. I'd want Server 2008 R2 to ignore all traffic on the external facing NIC and pass it to a virtual ClearOS gateway, and to put all its Internet traffic through its other NIC - which will face the rest of my network and be the default gateway for it. The theory is to keep the potentially vulnerable Server 2008 R2 install as tucked behind a Linux box as possible, without sacrificing too much performance. This is a home network that occasionally hosts dedicated game servers and voice chat servers, so most malicious activity is in the form of drive by non-targeted attacks, however, I don't trust Windows Server because I don't know the OS well enough, yet. So, three questions: How do I do this, am I going to be reasonably more secure doing this than if I just let the Server 2008 R2 rig handle all the network traffic and DHCP (not an option), and should I virtualize the Server 2008 R2 rig instead and if so in what? (Core 2 Duo e6600 w/ 5 gigs usable RAM)

  Read the article

• Dynamips Virtual Router not pinging external host after bridging

  - by maiky

  I have setup a virtual router image with dynamips and setup bridging between tap0 interface of the virtual router and eth0 and br0 with commands [root@cisco_host]# brctl addbr br0 [root@cisco_host]# ifconfig br0 up [root@cisco_host]# ifconfig eth1 0.0.0.0 [root@cisco_host]# brctl addif br0 eth1 [root@cisco_host]# ifconfig br0 192.168.0.100 netmask 255.255.255.0 up In dynagen configuration I have: f0/0 = NIO_tap:tap0 So, [root@cisco_host]# brctl addif br0 tap0 [root@cisco_host]# ifconfig tap0 up router(config)#int fa0/0 router(config-if)#ip address 192.168.0.101 255.255.255.0 router(config-if)#no shutdown After the configuration above I was expecting that from inside the router I could ping an external machine with IP 192.168.0.1 Actually from the host I can ping the external host 192.168.0.1 as well as 192.168.0.100 and 192.168.0.101. So what am I missing here? tap0 is bridged with br0 and in turn with eth1. So why the router is not pingable from 192.168.0.1 and vice-versa??

  Read the article

• RAID and Partitions, guidance Needed

  - by beauregarde

  Alright I have a Biostar TA790GX3A2+ Mobo 2x Seagate 750Gb Hard drive (with 2 different speeds) an X4 9750 A GeForce 9800GT and 2GB RAM Hardware Specs link text I want to configure my computer with partitions in various RAID arrays. The Partitions I know i want (disk letters are mostly for reference here) C: XP Boot D: XP Swap E: XP Run F: Games G: Data The Partitions I think I want (repeat caveat) H: small FAT for Win Legacy and DOS I: Linux J: Linux Swap K-?M?: Other Linux /whatever partitions N & O: Attic for D1 and D2 What I'd like to do, is have C: written on Disk 1 (D1),.. D: on D2,.. E: and F: striped on D1 & D2,.. G: mirrored or D1 & D2,.. I: on D2 (so i can just switch disc boot priority to open in Ubuntu),.. J: on D1,.. and H: somewhere low on D1 I am inexperienced with VMs, so i am unsure as to whether those run out of XP, or whether i need to reserve a primary partition for them. However, I think they would be preferable for testing new OS's to scheduling a partition for the same purpose. I'm also not married to XP, but -64 IS pretty important to me. QUestion Time 1) Ignoring the irrationality of it all, is such a configuration possible? If not, can some pseudo-approximation be achieved? 2) My RAID is software, isnt it? 3) How much should I short a 750GB HD? And should i use that space for my attics, or for my attics and something else, or for something else (.iso's perhaps?)? 4) if XP is striped on D1 & D2, will that interfere egregiously with my Swap writes on D2? If so, would striping both XP and Swap relieve (or at least mitigate) that issue? Should XP and Swap just be written normally on 2 different HDs? 5) Should I keep DL's and Drivers on E: (XP Run), F: (Games), or elsewhere? 6) Is 4GB enough for C:? 7) Is 30GB enough (or too much) for E:? 8) How much to reserve for the Linux and sub-Linux partitions? Also, where on the platter do you think i should put them? 9) Am I a fool to use FAT16 instead of FAT32 for H: because I'd rather run 95 than 98SE? If not, do you think 2GB or 4GB? 10) I cant predict what my Max Commit Charge will be, so recommendations for Pagefile size? 5GB? 12GB? 11) VMs, where do I run them? do they exacerbate anything? Would it be better to just emulate Linux, 95, and DOS? EC) What havent I considered that I really should? Notes: computer is mostly for playing games and watching media, though I wouldnt rule out the use of particularly blah-intensive anything.

  Read the article

• Bridging VirtualBox over OpenVPN TAP adapter on Windows

  - by Sean Edwards

  I'm trying to configure a virtual machine (VirtualBox guest running Backtrack 4) with a bridged adapter over a VPN connection. The VPN is is hosted by the cybersecurity club at my university, and connects to a sandboxed LAN designed for penetration testing against various servers that the club has built. My host (Windows 7 Ultimate) connects to the VPN fine and is assigned an IP through DHCP, but for some reason the VM can't do the same thing, and I'm not sure why. It's like OpenVPN is filtering out packets from the MAC address it doesn't recognize. I want the virtual machine to bridge over the VPN connection, because our IT office has very strict policies about what you can and can't do on the network. I want to be able to run active attacks (ARP spoofing, nmap, Nessus scans) in the sandbox environment without risking the traffic accidentally going over the university network and getting my internet access revoked. Bridging over the VPN connection and running all attacks from inside the VM would solve that problem. Any idea why the host can use this interface, but the VM can't?

  Read the article

• What are the advantages and disadvantages of the various virtual machine image formats?

  - by Matt

  Xen and Virtualbox etc both support a range of different virtual machine image formats. These are: vmdk, vdi, qcow & qcow2, hdd & vhd. Without any bias toward a particular product, I'm wanting to know what are the advantages and disadvantages of the various formats both from a features perspective, robustness and speed? One piece of info I discovered in a forum post was this: "The major difference is that VDI uses relatively large blocks (1MB) when growing an image, and thus has less overhead for block pointers etc. but isn't ultimately space efficient in the sense that if a single byte is non-zero in such a 1MB block the entire space is used. VMDK in contrast uses 64K blocks, and thus has more management overhead and generally a bit less disk space consumption What offsets this is that VDI is more efficient when it comes to snapshots." You might be thinking, I want to know this because I want to know which format to choose? Not exactly, I'm developing some software which utilises these formats and want to support one or more of them. Simplicity, large disks and ease of development are my main drivers.

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >