Search Results

Search found 838 results on 34 pages for 'lamp'.

Page 34/34 | < Previous Page | 30 31 32 33 34 

  • Resolve Wrong IP from Domain Name only on certain networks

    - by Godric Seer
    I host a personal website on an old desktop that is LAMP based. There are several strange things about this problem so I will break it down into steps. Since I have a dynamic IP, I use no-ip to make sure I have a working domain name at all times. I use the automatic update client, but logged in and checked and my no-ip domain has the proper IP tied to it. Here is a link to the homepage through the no-ip domain for reference. Also, I do a ping and a traceroute on the no-ip domain and get: [eckertzs@localhost ~]$ ping -c 1 endradil.noip.me PING endradil.noip.me (65.24.215.99) 56(84) bytes of data. 64 bytes from endradil.noip.me (65.24.215.99): icmp_seq=1 ttl=64 time=2.23 ms --- endradil.noip.me ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 104ms rtt min/avg/max/mdev = 2.233/2.233/2.233/0.000 ms [eckertzs@localhost ~]$ traceroute endradil.noip.me traceroute to endradil.noip.me (65.24.215.99), 30 hops max, 60 byte packets 1 . (192.168.2.1) 1.755 ms 5.409 ms 5.380 ms 2 endradil.noip.me (65.24.215.99) 6.297 ms 9.543 ms 10.324 ms Using this domain, I can connect to my webserver without issue or interruption(the https is required to avoid a redirect serverside, but it works). I also have a domain I have bought on GoDaddy where I have a CNAME record forwarding the www subdomain to my no-ip domain. CNAME Record Host: www Points to: endradil.noip.me TTL: 1 hour For the past several weeks, I never had an issue using the GoDaddy domain to connect (ssh or https). As of the past few days, however, the GoDaddy domain has only worked intermittently, for a few minutes at a time and then will go down for hours at a time. I get server not found errors most of the time. Also, if I happen to be using the GoDaddy domain for an ssh connection, the connection will freeze. I have run online tests of the DNS and have seen that the website is visible by external servers and resolved to the correct IP. I also contacted GoDaddy support but they had no issues connecting to the website, and therefore did not see any issues. My personal computers (Windows desktop, linux laptop, android phone) all fail to connect when on my personal wifi. If I disconnect my phone from the wifi and use my AT&T wireless data, it can connect with both domains without issue. When I attempt to use Google webmaster tools to crawl the site using the GoDaddy domain, Google can not find the site. From my linux laptop, I have found some interesting results when I ping or traceroute the domain. The results from these: [eckertzs@localhost ~]$ ping -c 1 www.endradil.com PING www.endradil.com.Belkin (198.105.244.228) 56(84) bytes of data. --- www.endradil.com.Belkin ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 10000ms [eckertzs@localhost ~]$ traceroute www.endradil.com traceroute to www.endradil.com (198.105.244.228), 30 hops max, 60 byte packets 1 . (192.168.2.1) 1.918 ms 2.806 ms 2.772 ms 2 cpe-65-24-208-1.insight.res.rr.com (65.24.208.1) 29.247 ms 29.654 ms 30.094 ms 3 cpe-69-23-24-117.new.res.rr.com (69.23.24.117) 15.597 ms 23.218 ms 23.581 ms 4 agg24.clmcohib01r.midwest.rr.com (65.29.1.52) 30.581 ms 30.556 ms 31.192 ms 5 be27.clevohek01r.midwest.rr.com (65.29.1.38) 30.580 ms 31.062 ms 31.038 ms 6 bu-ether25.atlngamq47w-bcr01.tbone.rr.com (107.14.19.38) 37.863 ms 68.844 ms 43.773 ms 7 107.14.17.178 (107.14.17.178) 51.866 ms 51.019 ms 50.989 ms 8 ae0.pr1.dca10.tbone.rr.com (107.14.17.200) 48.467 ms ae-4-0.a0.lax91.tbone.rr.com (66.109.1.113) 49.912 ms * 9 v413.core1.ash1.he.net (209.51.175.33) 60.270 ms 50.842 ms 50.819 ms 10 100ge5-1.core1.nyc4.he.net (184.105.223.166) 55.597 ms 56.045 ms 56.020 ms 11 xerocole-inc.10gigabitethernet12-4.core1.nyc4.he.net (216.66.41.242) 56.001 ms 55.969 ms 55.992 ms 12 * * * both show the incorrect IP. Also, the traceroute timesout on hops 12 through 255 (output truncated above). The traceroute using site24x7 works and shows reasonable results when run from their california server. From another linux box on a different network but in the same city as me (10 miles away), I still get timeout for traceroute, however the IP resolves correctly for the domain. From this I believe that the DNS result is incorrectly cached in either my router/modem or perhaps even at my ISP level. My question is, first, how do I find out exactly what is wrong, and second, how do I resolve it.

    Read the article

  • Moving a Drupal between linux servers, best practice to avoid file-ownership problems

    - by zero
    I want to port over a Drupal commons 6x24 from a local LAMP-stack to a production webserver. Both systems run OpenSuse Linux. How do I do this, what are the most important steps. How should I handle file-ownership. It's important for me to have to have full control of the file ownership. If I use the wwwrun account, I frequently run into problems, due to a very strict webserver-admin. See for example the long history of looking for fixes and solutions see this thread and even more interesting see this very long and impressive thread here. All troubles I run into have to do with file-owernship and permissions. This is my current setup; Note: This was just a quick hacked installation - quick and dirty. Well my interest is after the general options i have in the port of a drupal from linux to linux linux-vi17:/srv/www/htdocs/com624 # ls -l insgesamt 224 -rwxrwxrwx 1 root www 45285 19. Jan 00:54 CHANGELOG.txt -rwxrwxrwx 1 root www 925 19. Jan 00:54 COPYRIGHT.txt -rwxrwxrwx 1 root www 206 19. Jan 00:54 cron.php drwxrwxrwx 2 root www 4096 19. Jan 00:54 includes -rwxrwxrwx 1 root www 923 19. Jan 00:54 index.php -rwxrwxrwx 1 root www 1244 19. Jan 00:54 INSTALL.mysql.txt -rwxrwxrwx 1 root www 1011 19. Jan 00:54 INSTALL.pgsql.txt -rwxrwxrwx 1 root www 47073 19. Jan 00:54 install.php -rwxrwxrwx 1 root www 15572 19. Jan 00:54 INSTALL.txt -rwxrwxrwx 1 root www 14940 19. Jan 00:54 LICENSE.txt -rwxrwxrwx 1 root www 1858 19. Jan 00:54 MAINTAINERS.txt drwxrwxrwx 3 root www 4096 19. Jan 00:54 misc drwxrwxrwx 35 root www 4096 19. Jan 00:54 modules drwxrwxrwx 4 root www 4096 19. Jan 00:54 profiles -rwxrwxrwx 1 root www 1470 19. Jan 00:54 robots.txt drwxrwxrwx 2 root www 4096 19. Jan 00:54 scripts drwxrwxrwx 4 root www 4096 19. Jan 00:54 sites drwxrwxrwx 7 root www 4096 19. Jan 00:54 themes -rwxrwxrwx 1 root www 26250 19. Jan 00:54 update.php -rwxrwxrwx 1 root www 4864 19. Jan 00:54 UPGRADE.txt -rwxrwxrwx 1 root www 294 19. Jan 00:54 xmlrpc.php linux-vi17:/srv/www/htdocs/com624 # thx to BetaRides answer here a quick overview on the drush functionality with rsync http://drush.ws/ core-rsync Rsync the Drupal tree to/from another server using ssh. Examples: drush rsync @dev @stage Rsync Drupal root from dev to stage (one of which must be local). drush rsync ./ @stage:%files/img Rsync all files in the current directory to the 'img' directory in the file storage folder on stage. Arguments: source May be rsync path or site alias. See rsync documentation and example.aliases.drushrc.php. destination May be rsync path or site alias. See rsync documentation and example.aliases.drushrc.php. Options: --mode The unary flags to pass to rsync; --mode=rultz implies rsync -rultz. Default is -az. --RSYNC-FLAG Most rsync flags passed to drush sync will be passed on to rsync. See rsync documentation. --exclude-conf Excludes settings.php from being rsynced. Default. --include-conf Allow settings.php to be rsynced --exclude-files Exclude the files directory. --exclude-sites Exclude all directories in "sites/" except for "sites/all". --exclude-other-sites Exclude all directories in "sites/" except for "sites/all" and the site directory for the site being synced. Note: if the site directory is different between the source and destination, use --exclude-sites followed by "drush rsync @from:%site @to:%site" --exclude-paths List of paths to exclude, seperated by : (Unix-based systems) or ; (Windows). --include-paths List of paths to include, seperated by : (Unix-based systems) or ; (Windows). Topics: docs-aliases Site aliases overview with examples Aliases: rsync

    Read the article

  • Doing CRUD on XML using id attributes in C# ASP.NET

    - by Brandon G
    I'm a LAMP guy and ended up working this small news module for an asp.net site, which I am having some difficulty with. I basically am adding and deleting elements via AJAX based on the id. Before, I had it working based on the the index of a set of elements, but would have issues deleting, since the index would change in the xml file and not on the page (since I am using ajax). Here is the rundown news.xml <?xml version="1.0" encoding="utf-8"?> <news> <article id="1"> <title>Red Shield Environmental implements the PARCSuite system</title> <story>Add stuff here</story> </article> <article id="2"> <title>Catalyst Paper selects PARCSuite for its Mill-Wide Process...</title> <story>Add stuff here</story> </article> <article id="3"> <title>Weyerhaeuser uses Capstone Technology to provide Control...</title> <story>Add stuff here</story> </article> </news> Page sending del request: <script type="text/javascript"> $(document).ready(function () { $('.del').click(function () { var obj = $(this); var id = obj.attr('rel'); $.post('add-news-item.aspx', { id: id }, function () { obj.parent().next().remove(); obj.parent().remove(); } ); }); }); </script> <a class="del" rel="1">...</a> <a class="del" rel="1">...</a> <a class="del" rel="1">...</a> My functions protected void addEntry(string title, string story) { XmlDocument news = new XmlDocument(); news.Load(Server.MapPath("../news.xml")); XmlAttributeCollection ids = news.Attributes; //Create a new node XmlElement newelement = news.CreateElement("article"); XmlElement xmlTitle = news.CreateElement("title"); XmlElement xmlStory = news.CreateElement("story"); XmlAttribute id = ids[0]; int myId = int.Parse(id.Value + 1); id.Value = ""+myId; newelement.SetAttributeNode(id); xmlTitle.InnerText = this.TitleBox.Text.Trim(); xmlStory.InnerText = this.StoryBox.Text.Trim(); newelement.AppendChild(xmlTitle); newelement.AppendChild(xmlStory); news.DocumentElement.AppendChild(newelement); news.Save(Server.MapPath("../news.xml")); } protected void deleteEntry(int selectIndex) { XmlDocument news = new XmlDocument(); news.Load(Server.MapPath("../news.xml")); XmlNode xmlnode = news.DocumentElement.ChildNodes.Item(selectIndex); xmlnode.ParentNode.RemoveChild(xmlnode); news.Save(Server.MapPath("../news.xml")); } I haven't updated deleteEntry() and you can see, I was using the array index but need to delete the article element based on the article id being passed. And when adding an entry, I need to set the id to the last elements id + 1. Yes, I know SQL would be 100 times easier, but I don't have access so... help?

    Read the article

  • PHP framework question

    - by iconiK
    I'm currently working on a browser-based MMO and have chosen the LAMP stack because of the extremely low cost to start with in production (versus Windows + IIS + ASP.NET/C# + SQL Server, even though I have MSDN Universal). However I will need a PHP framework for this as it's no easy task. I am not restricted by anything other than the ability to run on Linux, as I will use a dedicated cloud hosting solution (and a VMWare image for development) and can configure it as needed. In no specific order: It has to be easily scalable; this is crucial. If the game becomes a steady success it will eventually outgrow the server beyond what the host provides and would have to be moved to several load-balanced servers. It is crucial that this can be done with minimum effort. I do know this might require following strict conventions, so if you know of any for your suggested framework please explain what would be needed. It has to provide modules for all the core tasks: authentication, ACL, database access, MVC, and so on. One or two missing modules are fine, as long as they can easily be written and integrated. It should support internationalization. I think there is no excuse for any web framework not to provide means of translating the application and switching between languages without a lot of effort from the programmer. Must have very good community support and preferably commercial support as well. Yes, I do know QCodo/QCubed is so nice, but it is not mature enough for this task. Smooth AJAX support is required. Whether the framework comes with AJAX-capable widgets or has an easy way of adding AJAX is not relevant, as long as AJAX is easily doable. I plan to use jQuery + Dojo or one of them alone - not exactly sure. Auto-magically doing stuff when it improves readability and relieves a lot of effort would be especially nice if it is generally reliable and does not interfere with other requirements. This seems to be the case of CakePHP. I have read a lot of comparisons and I know it's a really hot debate. The general answer is "try and see for yourself what suits you". However, I can't say it is easy for this task and I'm calling for your experience with building applications with similar requirements. So far I'm tied up between Zend and CakePHP by the general criteria, however, all well-known frameworks offer the same functionality in some way or another with different approaches each with it's own advantages and disadvantages. Edits: I am kinda new to MVC, however, I am willing to learn it and I don't care if a framework is easier for those new to MVC. I have lots of time to learn MVC and any other architectures (or whatever they're called) you recommend. I will use Zend as a utility "framework", even though it's just a collection of libraries (some good ones though, as I have been told). Current PHP contenders are: CakePHP, Kohana, Zend alone.

    Read the article

  • What is wrong with my SQL syntax here?

    - by CT
    I'm trying to create a IT asset database with a web front end. I've gathered some data from forms using POST as well as one variable that had already written to a cookie. This is the first time I have tried to enter the data into the database. Here is the code: <?php //get data $id = $_POST['id']; $company = $_POST['company']; $location = $_POST['location']; $purchase_date = $_POST['purchase_date']; $purchase_order = $_POST['purchase_order']; $value = $_POST['value']; $type = $_COOKIE["type"]; $notes = $_POST['notes']; $manufacturer = $_POST['manufacturer']; $model = $_POST['model']; $warranty = $_POST['warranty']; //set cookies setcookie('id', $id); setcookie('company', $company); setcookie('location', $location); setcookie('purchase_date', $purchase_date); setcookie('purchase_order', $purchase_order); setcookie('value', $value); setcookie('type', $type); setcookie('notes', $notes); setcookie('manufacturer', $manufacturer); setcookie('model', $model); setcookie('warranty', $warranty); //checkdata //start database interactions // connect to mysql server and database "asset_db" mysql_connect("localhost", "asset_db", "asset_db") or die(mysql_error()); mysql_select_db("asset_db") or die(mysql_error()); // Insert a row of information into the table "asset" mysql_query("INSERT INTO asset (id, company, location, purchase_date, purchase_order, value, type, notes) VALUES('$id', '$company', '$location', '$purchase_date', $purchase_order', '$value', '$type', '$notes') ") or die(mysql_error()); echo "Asset Added"; // Insert a row of information into the table "server" mysql_query("INSERT INTO server (id, manufacturer, model, warranty) VALUES('$id', '$manufacturer', '$model', '$warranty') ") or die(mysql_error()); echo "Server Added"; //destination url //header("Location: verify_submit_server.php"); ?> The error I get is: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '', '678 ', 'Server', '789')' at line 2 That data is just test data I was trying to throw in there, but it looks to be the at the $value, $type, $notes. Here are the table create statements if they help: <?php // connect to mysql server and database "asset_db" mysql_connect("localhost", "asset_db", "asset_db") or die(mysql_error()); mysql_select_db("asset_db") or die(mysql_error()); // create asset table mysql_query("CREATE TABLE asset( id VARCHAR(50) PRIMARY KEY, company VARCHAR(50), location VARCHAR(50), purchase_date VARCHAR(50), purchase_order VARCHAR(50), value VARCHAR(50), type VARCHAR(50), notes VARCHAR(200))") or die(mysql_error()); echo "Asset Table Created.</br />"; // create software table mysql_query("CREATE TABLE software( id VARCHAR(50) PRIMARY KEY, software VARCHAR(50), license VARCHAR(50))") or die(mysql_error()); echo "Software Table Created.</br />"; // create laptop table mysql_query("CREATE TABLE laptop( id VARCHAR(50) PRIMARY KEY, manufacturer VARCHAR(50), model VARCHAR(50), serial_number VARCHAR(50), esc VARCHAR(50), user VARCHAR(50), prev_user VARCHAR(50), warranty VARCHAR(50))") or die(mysql_error()); echo "Laptop Table Created.</br />"; // create desktop table mysql_query("CREATE TABLE desktop( id VARCHAR(50) PRIMARY KEY, manufacturer VARCHAR(50), model VARCHAR(50), serial_number VARCHAR(50), esc VARCHAR(50), user VARCHAR(50), prev_user VARCHAR(50), warranty VARCHAR(50))") or die(mysql_error()); echo "Desktop Table Created.</br />"; // create server table mysql_query("CREATE TABLE server( id VARCHAR(50) PRIMARY KEY, manufacturer VARCHAR(50), model VARCHAR(50), warranty VARCHAR(50))") or die(mysql_error()); echo "Server Table Created.</br />"; ?> Running a standard LAMP stack on Ubuntu 10.04. Thank you.

    Read the article

  • MySQL and INT auto_increment fields

    - by PHPguy
    Hello folks, I'm developing in LAMP (Linux+Apache+MySQL+PHP) since I remember myself. But one question was bugging me for years now. I hope you can help me to find an answer and point me into the right direction. Here is my challenge: Say, we are creating a community website, where we allow our users to register. The MySQL table where we store all users would look then like this: CREATE TABLE `users` ( `uid` int(2) unsigned NOT NULL auto_increment COMMENT 'User ID', `name` varchar(20) NOT NULL, `password` varchar(32) NOT NULL COMMENT 'Password is saved as a 32-bytes hash, never in plain text', `email` varchar(64) NOT NULL, `created` int(11) unsigned NOT NULL default '0' COMMENT 'Timestamp of registration', `updated` int(11) unsigned NOT NULL default '0' COMMENT 'Timestamp of profile update, e.g. change of email', PRIMARY KEY (`uid`) ) ENGINE=MyISAM DEFAULT CHARSET=utf8; So, from this snippet you can see that we have a unique and automatically incrementing for every new user 'uid' field. As on every good and loyal community website we need to provide users with possibility to completely delete their profile if they want to cancel their participation in our community. Here comes my problem. Let's say we have 3 registered users: Alice (uid = 1), Bob (uid = 2) and Chris (uid = 3). Now Bob want to delete his profile and stop using our community. If we delete Bob's profile from the 'users' table then his missing 'uid' will create a gap which will be never filled again. In my opinion it's a huge waste of uid's. I see 3 possible solutions here: 1) Increase the capacity of the 'uid' field in our table from SMALLINT (int(2)) to, for example, BIGINT (int(8)) and ignore the fact that some of the uid's will be wasted. 2) introduce the new field 'is_deleted', which will be used to mark deleted profiles (but keep them in the table, instead of deleting them) to re-utilize their uid's for newly registered users. The table will look then like this: CREATE TABLE `users` ( `uid` int(2) unsigned NOT NULL auto_increment COMMENT 'User ID', `name` varchar(20) NOT NULL, `password` varchar(32) NOT NULL COMMENT 'Password is saved as a 32-bytes hash, never in plain text', `email` varchar(64) NOT NULL, `is_deleted` int(1) unsigned NOT NULL default '0' COMMENT 'If equal to "1" then the profile has been deleted and will be re-used for new registrations', `created` int(11) unsigned NOT NULL default '0' COMMENT 'Timestamp of registration', `updated` int(11) unsigned NOT NULL default '0' COMMENT 'Timestamp of profile update, e.g. change of email', PRIMARY KEY (`uid`) ) ENGINE=MyISAM DEFAULT CHARSET=utf8; 3) Write a script to shift all following user records once a previous record has been deleted. E.g. in our case when Bob (uid = 2) decides to remove his profile, we would replace his record with the record of Chris (uid = 3), so that uid of Chris becomes qual to 2 and mark (is_deleted = '1') the old record of Chris as vacant for the new users. In this case we keep the chronological order of uid's according to the registration time, so that the older users have lower uid's. Please, advice me now which way is the right way to handle the gaps in the auto_increment fields. This is just one example with users, but such cases occur very often in my programming experience. Thanks in advance!

    Read the article

  • Why ????? is displayed instead of non-english characters?

    - by smhnaji
    I first created a simple HTML page that uses UTF-8 as its character encoding. Then I moved the HTML content as a view in codeigniter and it was still ok (I had used non-english characters that were ok as always) I added a simple dynamic functionality (there is a contact us form in it that emails users feedback to site admin). Please note that the characters were ok at localhost (which is a LAMP server running on Ubuntu 12.04 LTS) Strange is that when I uploaded the app to server, all persian characters are shown as ???? (For example ??? (which means Name) is shown ??? and so so...) I have not even connected to mysql or any other DBMS. It's the only page in the website (it's more an under construction page) and nothing else has been used in it. Maybe I should state that I have also used session library to thank the user after his feedback was sent to admins, nothing else. I have really no idea about the problem. UPDATE Now I can see that the problem is only with cPanel. On Directadmin I can see that everything is normal. Both Chromium and Firefox DO use UTF-8 as page's character encoding. URL is http://WEBSITE.COM/dmf/dynamic/ (dmf is the abbreviation of the project name!). There is nothing non-english in the URL. The page's code is as follows: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>??? ???????</title> <link rel="stylesheet" type="text/css" href="<?php echo base_url('template/css/style.css'); ?>" /> <!-- 1. jquery library --> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.min.js"> </script> <!-- 2. flowplayer --> <script src="http://releases.flowplayer.org/5.1.1/flowplayer.min.js"></script> <!-- 3. skin --> <link rel="stylesheet" type="text/css" href="http://releases.flowplayer.org/5.1.1/skin/minimalist.css" /> </head> <body> <div id="wrapper"> <header> <h1>??? ???????</h1> </header> <section id="box-container"> <?php echo form_open('contact', "id='contact-us'"); echo form_fieldset('???? ?? ??'); if ($this->session->userdata('mailsent')) { echo '<div>??????? ???? ??? ????? ??</div>'; $this->session->sess_destroy(); } echo '<input tabindex="1" id="name-in" value="???" type="text" name="name"/> <input tabindex="2" id="mail-in" value="?????" type="email" name="email"/> <textarea tabindex="3" id="content-in" name="message">???????</textarea> <input tabindex="4" id="submit" type="submit" value="?????" />'; echo '<div class="clear"></div>'; echo form_fieldset_close(); echo form_close(); ?> <div id="sms-comp"> <h2>?????? ??????</h2> <p> <span id="comp-title">?? ??? ????</span> ???? ??????? ???? ??? </p> </div> <div id="last-program"> <h2>?????? ????? ??????</h2> <div class="flowplayer"> <video id="my_video_1" width="212" height="126" poster="<?php echo base_url('template/images/img.jpg'); ?>" controls="controls" src="http://archive.org/download/Pbtestfilemp4videotestmp4/video_test.ogv" type='video/mp4'> </video> </div> </div> <div class="clear"></div> </section> </div> <footer> ????? ? ????? : <a href="http://powered-by.com/" target="_blank">????? ???</a> </footer> </body> </html>

    Read the article

  • DNS Problems (NIGHTMARES!) with BIND and Virtualmin

    - by Nyxynyx
    I have a webserver (Ubuntu 12.04 with LAMP) using Virtualmin / Webmin. Because I just moved from a Cpanel system, I am having a nightmare configuring the DNS! Using intoDNS.com, the failed reports are: Mismatched NS records WARNING: One or more of your nameservers did not return any of your NS records. DNS servers responded ERROR: One or more of your nameservers did not respond: The ones that did not respond are: 123.123.123.123 213.251.188.141x Multiple Nameservers ERROR: Looks like you have less than 2 nameservers. According to RFC2182 section 5 you must have at least 3 nameservers, and no more than 7. Having 2 nameservers is also ok by me. Missing nameservers reported by your nameserver You should already know that your NS records at your nameservers are missing, so here it is again: ns1.mydomain.com. sdns2.ovh.net. SOA record No valid SOA record came back! MX Records WWW A Record ERROR: I could not get any A records for www.mydomain.com! Step-by-Step of my Attempt In my domain registrar (Namecheap), I registered ns1.mydomain.com as a nameserver, pointing to the IP address of my web server which is running bind9. The domain is setup with DNS ns1.mydomain.com and sdns2.ovh.net. sdns2.ovh.net is a secondary DNS server (SLAVE and pointing mydomain.com to the IP address of my web server) Webserver domain: mydomain.com Webserver hostname: ns4000000.ip-123-123-123.net Webserver IP: 123.123.123.123 Under Virtualmin, I edited the default Virtual server template, BIND DNS records for new domains: ns1.mydomain.com Master DNS server hostname: ns1.mydomain.com Next I created a Virtual server using that server template. This is what I've done but its still not working! Any ideas? I've been stuck for days, thank you for all your help! service bind9 status * bind9 is running lsof -i :53 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME named 6966 bind 20u IPv6 338583 0t0 TCP *:domain (LISTEN) named 6966 bind 21u IPv4 338588 0t0 TCP localhost.localdomain:domain (LISTEN) named 6966 bind 22u IPv4 338590 0t0 TCP ns4000000.ip-123-123-123.net:domain (LISTEN) named 6966 bind 512u IPv6 338582 0t0 UDP *:domain named 6966 bind 513u IPv4 338587 0t0 UDP localhost.localdomain:domain named 6966 bind 514u IPv4 338589 0t0 UDP ns4000000.ip-123-123-123.net:domain /etc/resolv.con (Not sure how 213.186.33.99 got here) nameserver 127.0.0.1 nameserver 213.186.33.99 search ovh.net host 123.123.123.123 (my web server's IP) 13.60.245.198.in-addr.arpa domain name pointer ns4000000.ip-123-123-123.net. nslookup 213.186.33.99 Server: 127.0.0.1 Address: 127.0.0.1#53 Non-authoritative answer: 99.33.186.213.in-addr.arpa name = cdns.ovh.net. Authoritative answers can be found from: 33.186.213.in-addr.arpa nameserver = ns.ovh.net. 33.186.213.in-addr.arpa nameserver = dns.ovh.net. nslookup ns1.mydomain.com ;; Got SERVFAIL reply from 127.0.0.1, trying next server ;; connection timed out; no servers could be reached nslookup ns2.mydomain.com ;; Got SERVFAIL reply from 127.0.0.1, trying next server ;; connection timed out; no servers could be reached nslookup www.mydomain.com ;; Got SERVFAIL reply from 127.0.0.1, trying next server ;; connection timed out; no servers could be reached dig mydomain.com ; <<>> DiG 9.8.1-P1 <<>> mydomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 43540 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;mydomain.com. IN A ;; Query time: 0 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Thu Oct 11 11:30:09 2012 ;; MSG SIZE rcvd: 30 dig ns1.mydomain.com ; <<>> DiG 9.8.1-P1 <<>> ns1.mydomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 31254 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;ns1.mydomain.com. IN A ;; Query time: 0 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Thu Oct 11 11:30:16 2012 ;; MSG SIZE rcvd: 34 /etc/bind/named.conf include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local"; include "/etc/bind/named.conf.default-zones"; /etc/bind/named.conf.default-zones zone "." { type hint; file "/etc/bind/db.root"; }; zone "localhost" { type master; file "/etc/bind/db.local"; }; zone "127.in-addr.arpa" { type master; file "/etc/bind/db.127"; }; zone "0.in-addr.arpa" { type master; file "/etc/bind/db.0"; }; zone "255.in-addr.arpa" { type master; file "/etc/bind/db.255"; }; /etc/bind/named.conf.local zone "mydomain.com" { type master; file "/var/lib/bind/mydomain.com.hosts"; allow-transfer { 127.0.0.1; localnets; }; }; /etc/bind/named.conf.options options { directory "/var/cache/bind"; dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; // allow-recursion { 127.0.0.1; }; // transfer-source; }; named-checkconf -z dns_master_load: /var/lib/bind/mydomain.com.hosts:21: unexpected end of line dns_master_load: /var/lib/bind/mydomain.com.hosts:20: unexpected end of input /var/lib/bind/mydomain.com.hosts: file does not end with newline zone mydomain.com/IN: loading from master file /var/lib/bind/mydomain.com.hosts failed: unexpected end of input zone mydomain.com/IN: not loaded due to errors. _default/mydomain.com/IN: unexpected end of input zone localhost/IN: loaded serial 2 zone 127.in-addr.arpa/IN: loaded serial 1 zone 0.in-addr.arpa/IN: loaded serial 1 zone 255.in-addr.arpa/IN: loaded serial 1 iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:20000 ACCEPT tcp -- anywhere anywhere tcp dpt:webmin ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT tcp -- anywhere anywhere tcp dpt:imaps ACCEPT tcp -- anywhere anywhere tcp dpt:imap2 ACCEPT tcp -- anywhere anywhere tcp dpt:pop3s ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 ACCEPT tcp -- anywhere anywhere tcp dpt:ftp-data ACCEPT tcp -- anywhere anywhere tcp dpt:ftp ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:submission ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:ssh ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination

    Read the article

  • nginx reverse proxy cannot access apache virtual hosts

    - by Sc0rian
    I am setting up nginx as a reverse proxy. The server runs on directadmin and lamp stack. I have nginx running on port 81. I can access all my sites (including virtual ips) on the port 81. However when I forward the traffic from port 80 to 81, the virtual ips have a message saying "Apache is running normally". Server IPs are fine, and I can still access virtual IP's on 81. [root@~]# netstat -an | grep LISTEN | egrep ":80|:81" tcp 0 0 <virtual ip>:81 0.0.0.0:* LISTEN tcp 0 0 <virtual ip>:81 0.0.0.0:* LISTEN tcp 0 0 <serverip>:81 0.0.0.0:* LISTEN tcp 0 0 :::80 :::* LISTEN apache 24090 0.6 1.3 29252 13612 ? S 18:34 0:00 /usr/sbin/httpd -k start -DSSL apache 24092 0.9 2.1 39584 22056 ? S 18:34 0:00 /usr/sbin/httpd -k start -DSSL apache 24096 0.2 1.9 35892 20256 ? S 18:34 0:00 /usr/sbin/httpd -k start -DSSL apache 24120 0.3 1.7 35752 17840 ? S 18:34 0:00 /usr/sbin/httpd -k start -DSSL apache 24495 0.0 1.4 30892 14756 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24496 1.0 2.1 39892 22164 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24516 1.5 3.6 55496 38040 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24519 0.1 1.2 28996 13224 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24521 2.7 4.0 58244 41984 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24522 0.0 1.2 29124 12672 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24524 0.0 1.1 28740 12364 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24535 1.1 1.7 36008 17876 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24536 0.0 1.1 28592 12084 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24537 0.0 1.1 28592 12112 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24539 0.0 0.0 0 0 ? Z 18:35 0:00 [httpd] <defunct> apache 24540 0.0 1.1 28592 11540 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24541 0.0 1.1 28592 11548 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL root 24548 0.0 0.0 4132 752 pts/0 R+ 18:35 0:00 egrep apache|nginx root 28238 0.0 0.0 19576 284 ? Ss May29 0:00 nginx: master process /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf apache 28239 0.0 0.0 19888 804 ? S May29 0:00 nginx: worker process apache 28240 0.0 0.0 19888 548 ? S May29 0:00 nginx: worker process apache 28241 0.0 0.0 19736 484 ? S May29 0:00 nginx: cache manager process here is my nginx conf: cat /usr/local/nginx/conf/nginx.conf user apache apache; worker_processes 2; # Set it according to what your CPU have. 4 Cores = 4 worker_rlimit_nofile 8192; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] ' '"$request" $status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; server_tokens off; access_log /var/log/nginx_access.log main; error_log /var/log/nginx_error.log debug; server_names_hash_bucket_size 64; sendfile on; tcp_nopush on; tcp_nodelay off; keepalive_timeout 30; gzip on; gzip_comp_level 9; gzip_proxied any; proxy_buffering on; proxy_cache_path /usr/local/nginx/proxy_temp levels=1:2 keys_zone=one:15m inactive=7d max_size=1000m; proxy_buffer_size 16k; proxy_buffers 100 8k; proxy_connect_timeout 60; proxy_send_timeout 60; proxy_read_timeout 60; server { listen <server ip>:81 default rcvbuf=8192 sndbuf=16384 backlog=32000; # Real IP here server_name <server host name> _; # "_" is for handle all hosts that are not described by server_name charset off; access_log /var/log/nginx_host_general.access.log main; location / { proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass http://<server ip>; # Real IP here client_max_body_size 16m; client_body_buffer_size 128k; proxy_buffering on; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 120; proxy_buffer_size 16k; proxy_buffers 32 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; } location /nginx_status { stub_status on; access_log off; allow 127.0.0.1; deny all; } } include /usr/local/nginx/vhosts/*.conf; } here is my vhost conf: # cat /usr/local/nginx/vhosts/1.conf server { listen <virt ip>:81 default rcvbuf=8192 sndbuf=16384 backlog=32000; # Real IP here server_name <virt domain name>.com ; # "_" is for handle all hosts that are not described by server_name charset off; access_log /var/log/nginx_host_general.access.log main; location / { proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass http://<virt ip>; # Real IP here client_max_body_size 16m; client_body_buffer_size 128k; proxy_buffering on; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 120; proxy_buffer_size 16k; proxy_buffers 32 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; } } Apache config: <VirtualHost xxxxxx:80 > ServerName www.<domain>.com ServerAlias www.<domain>.com <domain>.com ServerAdmin webmaster@<domain>.com DocumentRoot /home/<domain>/domains/<domain>.com/public_html ScriptAlias /cgi-bin/ /home/<domain>/domains/<domain>.com/public_html/cgi-bin/ UseCanonicalName OFF <IfModule !mod_ruid2.c> SuexecUserGroup <domain> <domain> </IfModule> <IfModule mod_ruid2.c> RMode config RUidGid <domain> <domain> RGroups apache access </IfModule> CustomLog /var/log/httpd/domains/<domain>.com.bytes bytes CustomLog /var/log/httpd/domains/<domain>.com.log combined ErrorLog /var/log/httpd/domains/<domain>.com.error.log <Directory /home/<domain>/domains/<domain>.com/public_html> Options +Includes -Indexes php_admin_flag engine ON php_admin_value sendmail_path '/usr/sbin/sendmail -t -i -f <domain>@<domain>.com' </Directory> <virtual ip address>:80 is a NameVirtualHost default server www.xx.com (/usr/local/directadmin/data/users/xx/httpd.conf:16) port 80 namevhost www.xx.com (/usr/local/directadmin/data/users/xx/httpd.conf:16) port 80 namevhost www.xx.co.uk (/usr/local/directadmin/data/users/xx/httpd.conf:107) port 80 namevhost www.xx.co.uk (/usr/local/directadmin/data/users/xx/httpd.conf:151) port 80 namevhost www.xx.co.uk (/usr/local/directadmin/data/users/xx/httpd.conf:195) <virtual ip address>:443 is a NameVirtualHost default server www.xx.com (/usr/local/directadmin/data/users/xx/httpd.conf:61) port 443 namevhost www.xx.com (/usr/local/directadmin/data/users/xx/httpd.conf:61) <server ip>:80 is a NameVirtualHost default server localhost (/etc/httpd/conf/extra/httpd-vhosts.conf:29) port 80 namevhost localhost (/etc/httpd/conf/extra/httpd-vhosts.conf:29) port 80 namevhost www.xx.co.uk (/usr/local/directadmin/data/users/admin/httpd.conf:16)

    Read the article

  • DNS resolution problems; dig SERVFAIL error

    - by JustinP
    I'm setting up a couple of dedicated servers, and having problems setting up my nameservers properly. One of these is a LEMP server (LAMP with nginx in place of Apache), and the other will function solely as an email server, running exim/dovecot/ASSP antispam (no Apache). The LEMP server is CentOS 5.5, with no control panel, while the email server is CentOS 5.5 as well, with cPanel/WHM. So, I've had problems getting DNS set up properly. I have two domains, each one pointing to one of these servers. The nameservers are registered correctly with the domain registrar, and the nameserver IPs are entered correctly as well. I've spoken to tech support at the registrar and they confirm that everything is set up on their end. Not knowing much about DNS, I googled nameservers and DNS until I nearly went blind, and spent hours messing with the configuration. Eventually, I got the LEMP server's DNS working properly (no cPanel). Pleased with this triumph, I'm trying to mimic that configuration and repeat the process with the email server, and it's just not happening. The nameserver starts and stops, but the domain doesn't resolve. Things I have tried Going through standard procedures to set up DNS in WHM Clearing all DNS information, uninstalling BIND, then reinstalling all of that and again going through WHM procedures for setting up DNS Clearing all DNS information, and setting up BIND via shell (completely outside of cPanel) by using my config and zone files from the LEMP server as a template named runs just fine, but nothing is resolving. When I "dig any example.com" I get a SERVFAIL message. Nslookups return no information. Here are my config and zone files. named.conf controls { inet 127.0.0.1 allow { localhost; } keys { coretext-key; }; }; options { listen-on port 53 { any; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; // Those options should be used carefully because they disable port // randomization // query-source port 53; // query-source-v6 port 53; allow-query { any; }; allow-query-cache { any; }; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; view "localhost_resolver" { match-clients { 127.0.0.0/24; }; match-destinations { localhost; }; recursion yes; //zone "." IN { // type hint; // file "/var/named/named.ca"; //}; include "/etc/named.rfc1912.zones"; }; view "internal" { /* This view will contain zones you want to serve only to "internal" clients that connect via your directly attached LAN interfaces - "localnets" . */ match-clients { localnets; }; match-destinations { localnets; }; recursion yes; zone "." IN { type hint; file "/var/named/named.ca"; }; // include "/var/named/named.rfc1912.zones"; // you should not serve your rfc1912 names to non-localhost clients. // These are your "authoritative" internal zones, and would probably // also be included in the "localhost_resolver" view above : zone "example.com" { type master; file "data/db.example.com"; }; zone "3.2.1.in-addr.arpa" { type master; file "data/db.1.2.3"; }; }; view "external" { /* This view will contain zones you want to serve only to "external" clients * that have addresses that are not on your directly attached LAN interface subnets: */ match-clients { any; }; match-destinations { any; }; recursion no; // you'd probably want to deny recursion to external clients, so you don't // end up providing free DNS service to all takers allow-query-cache { none; }; // Disable lookups for any cached data and root hints // all views must contain the root hints zone: //include "/etc/named.rfc1912.zones"; zone "." IN { type hint; file "/var/named/named.ca"; }; zone "example.com" { type master; file "data/db.example.com"; }; zone "3.2.1.in-addr.arpa" { type master; file "data/db.1.2.3"; }; }; include "/etc/rndc.key"; db.example.com $TTL 1D ; ; Zone file for example.com ; ; Mandatory minimum for a working domain ; @ IN SOA ns1.example.com. contact.example.com. ( 2011042905 ; serial 8H ; refresh 2H ; retry 4W ; expire 1D ; default_ttl ) NS ns1.example.com. NS ns2.example.com. ns1 A 1.2.3.4 ns2 A 1.2.3.5 example.com. A 1.2.3.4 localhost A 127.0.0.1 www CNAME example.com. mail CNAME example.com. ; db.1.2.3 $TTL 1D $ORIGIN 3.2.1.in-addr.arpa. @ IN SOA ns1.example.com contact.example.com. ( 2011042908 ; 8H ; 2H ; 4W ; 1D ; ) NS ns1.example.com. NS ns2.example.com. 4 PTR hostname.example.com. 5 PTR hostname.example.com. ; Also of note: both of these servers are managed. Tech support is very responsive, and largely useless. Hours go by with them asking me questions to narrow down what could be wrong, then they pass the ticket to the tech on the next shift, who ignores everything that's happened already and spend his whole shift asking all the same questions the last guy asked. So, in summary: *Nameservers, with IPs, are correctly registered with domain registrar *named is configured and running *...and must not be configured correctly, because nothing resolves. Any help would be great. I changed domains and IPs in the files to generics, but let me know if you need to know the domain in question. Thanks! UPDATE I found that I didn't have 127.0.0.1 in /etc/resolv.conf, so I added it, along with my two public IPs that I have named listening on. resolv.conf search www.example.com example.com nameserver 127.0.0.1 nameserver 7.8.9.10 ;Was in here by default, authoritative nameserver of hosting company nameserver 1.2.3.4 ;Public IP #1 nameserver 1.2.3.5 ;Public IP #2 Now when I DIG example.com from the host, it resolves. If I try to DIG from my other server (in the same datacenter), or from the internet, it times out or I get SERVFAIL.

    Read the article

  • Cisco ASA: How to route PPPoE-assigned subnet?

    - by Martijn Heemels
    We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

    Read the article

  • Adapting a HTML/CSS dropdown menu to multi-level

    - by Adam Nygate
    Ive been trying to make the original dropdown into multi level for a site im working on. All of my attempts have failed (. For some reason i can only do "margin-right" to align the elements, and this causes some problems. I think it has something to do with the position attribute. Here is my HTML: <ol id="nav"> <li><a href="index.php">Home</a></li> <li class="dropdown_alignedLeft"> <a href="">Products</a> <ul><li class="dropdown_alignedRight"> <a href="">iPoP</a> <ul style="margin-right:-400px; top:0px;-webkit-border-top-right-radius: 5px;border-top-right-radius: 5px;-moz-border-radius-topright: 5px;"><li><a href="customers.php?category=ipop">iPoP - Network Solutions for Vessels</a></li></ul><li class="dropdown_alignedRight"> <a href="">Cameras</a> <ul style="margin-right:-400px; top:0px;-webkit-border-top-right-radius: 5px;border-top-right-radius: 5px;-moz-border-radius-topright: 5px;"><li><a href="customers.php?category=icam">iCam 501 Ultra - Intrinsically Safe Digital Camera with Flash</a></li></ul><li class="dropdown_alignedRight"> <a href="">BNWAS</a> <ul style="margin-right:-400px; top:0px;-webkit-border-top-right-radius: 5px;border-top-right-radius: 5px;-moz-border-radius-topright: 5px;"><li><a href="customers.php?category=bnwas">BNWAS - Bridge Navigation Watch Alarm System</a></li></ul><li class="dropdown_alignedRight"> <a href="">Lighting</a> <ul style="margin-right:-400px; top:0px;-webkit-border-top-right-radius: 5px;border-top-right-radius: 5px;-moz-border-radius-topright: 5px;"><li><a href="customers.php?category=peli">Peli 2690 - Intrinsically Safe LED Head Lamp</a></li></ul><li class="dropdown_alignedRight"> <a href="">Communication</a> <ul style="margin-right:-400px; top:0px;-webkit-border-top-right-radius: 5px;border-top-right-radius: 5px;-moz-border-radius-topright: 5px;"><li><a href="customers.php?category=handy">Ex-Handy 06 - Intrinsically Safe Cell Phone</a></li></ul> </ul> <li class="dropdown_alignedLeft"> <a href="">Customers</a> <ul> <li><a href="customers.php?category=maritime">Maritime</a></li> <li><a href="customers.php?category=non">Non-Maritime</a></li> <li class="dropdown_lastItem"><a href="customers.php?category=organizations">Regulatory Organizations</a></li> </ul> <li><a href="order.php">Product Enquiry</a></li> <li><a href="contact.php">Contact Us</a></li> <li class="dropdown_alignedLeft"> <a href="">Company</a> <ul> <!-- <li><a href="">About Us</a></li> --> <li><a href="newsandpr.php?category=News">News</a></li> <li class="dropdown_lastItem"><a href="newsandpr.php?category=Press Release">Press Releases</a></li> </ul> </ol> And my CSS: #nav { float:right; margin:15px 0 0; } #nav li { float:left; } #nav li a { display:block; font-family:"PT Sans","Helvetica Neue",Arial,sans-serif; font-size:16px; text-decoration:none; color:#2B95C8; padding:10px 20px 20px; } .dropdown_alignedLeft,.dropdown_alignedRight { position:relative; } #nav .dropdown_alignedLeft>a,#nav .dropdown_alignedRight>a { background:url(../images/dropdown_arrow_blue.png) no-repeat top right; padding:10px 30px 20px 20px; } #nav .dropdown_alignedLeft:hover>a,#nav .dropdown_alignedRight:hover>a { -moz-border-radius-topleft:5px; -moz-border-radius-topright:5px; -moz-border-radius-bottomright:0; -moz-border-radius-bottomleft:0; -webkit-border-top-left-radius:5px; -webkit-border-top-right-radius:5px; -webkit-border-bottom-right-radius:0; -webkit-border-bottom-left-radius:0; border-top-left-radius:5px; border-top-right-radius:5px; border-bottom-right-radius:0; border-bottom-left-radius:0; color:#FFF; background:#2378A1 url(../images/dropdown_arrow_blue.png) no-repeat bottom right; } .dropdown_alignedLeft ul,.dropdown_alignedRight ul { display:none; } #nav .dropdown_alignedLeft:hover>ul,#nav .dropdown_alignedRight:hover>ul { display:block; z-index:100; position:absolute; top:50px; -moz-border-radius-topleft:0; -moz-border-radius-topright:0; -moz-border-radius-bottomright:5px; -moz-border-radius-bottomleft:5px; -webkit-border-top-left-radius:0; -webkit-border-top-right-radius:0; -webkit-border-bottom-right-radius:5px; -webkit-border-bottom-left-radius:5px; border-top-left-radius:0; border-top-right-radius:0; border-bottom-right-radius:5px; border-bottom-left-radius:5px; background:#2378A1; padding:0 0 6px; } #nav .dropdown_alignedRight:hover>ul { top:50px; right:0; text-align:right; } #nav li ul li { float:none; border-bottom:1px dashed #2B95C8; margin:0 20px; } #nav li ul li.dropdown_innerTitle { border:none; font-family:"Helvetica Neue",Arial,sans-serif; font-size:15px; white-space:nowrap; color:#C8DDE7; margin:10px 20px 0; padding:10px 0; } #nav li ul li.dropdown_lastItem { border:none; } #nav li ul li a { font-family:"Helvetica Neue",Arial,sans-serif; font-size:13px; color:#FFF; white-space:nowrap; padding:10px 0 9px; } #nav>li:hover>a,#nav li .current_page { color:#2378A1; background:url(../images/current_page_arrow_blue.png) no-repeat center bottom; } #nav li ul li a:hover { color: #C8DDE7; } For a live version of the menu, please go here: JSFiddle - Live Menu

    Read the article

  • What is consuming memory?

    - by Milan Babuškov
    Feel free to change the question title. I have a VPS with standard LAMP stack and a busy website. Operating system is CentOS 5.5. Virtualization is done with VMWare. My server gets real slow about every 6 hours. Logging into it I see that 1.6GB of RAM is consumed. However, listing the active processes does not explain the problem. Can anyone make any sense of this? "free" shows this: total used free shared buffers cached Mem: 2059456 2049280 10176 0 14780 380968 -/+ buffers/cache: 1653532 405924 Swap: 2096472 96 2096376 While this is output of "ps": [root@vmi29 /]# ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 10348 688 ? Rs Jun05 0:01 init [3] root 2 0.0 0.0 0 0 ? S< Jun05 0:00 [migration/0] root 3 0.0 0.0 0 0 ? SN Jun05 0:00 [ksoftirqd/0] root 4 0.0 0.0 0 0 ? S< Jun05 0:00 [migration/1] root 5 0.0 0.0 0 0 ? SN Jun05 0:00 [ksoftirqd/1] root 6 0.0 0.0 0 0 ? S< Jun05 0:00 [migration/2] root 7 0.0 0.0 0 0 ? SN Jun05 0:00 [ksoftirqd/2] root 8 0.0 0.0 0 0 ? S< Jun05 0:00 [migration/3] root 9 0.0 0.0 0 0 ? SN Jun05 0:00 [ksoftirqd/3] root 10 0.0 0.0 0 0 ? S< Jun05 0:06 [events/0] root 11 0.0 0.0 0 0 ? S< Jun05 0:00 [events/1] root 12 0.0 0.0 0 0 ? S< Jun05 0:00 [events/2] root 13 0.0 0.0 0 0 ? S< Jun05 0:00 [events/3] root 14 0.0 0.0 0 0 ? S< Jun05 0:00 [khelper] root 31 0.0 0.0 0 0 ? S< Jun05 0:00 [kthread] root 38 0.0 0.0 0 0 ? S< Jun05 0:00 [kblockd/0] root 39 0.0 0.0 0 0 ? S< Jun05 0:00 [kblockd/1] root 40 0.0 0.0 0 0 ? S< Jun05 0:00 [kblockd/2] root 41 0.0 0.0 0 0 ? S< Jun05 0:00 [kblockd/3] root 42 0.0 0.0 0 0 ? S< Jun05 0:00 [kacpid] root 204 0.0 0.0 0 0 ? S< Jun05 0:00 [cqueue/0] root 205 0.0 0.0 0 0 ? S< Jun05 0:00 [cqueue/1] root 206 0.0 0.0 0 0 ? S< Jun05 0:00 [cqueue/2] root 207 0.0 0.0 0 0 ? S< Jun05 0:00 [cqueue/3] root 210 0.0 0.0 0 0 ? S< Jun05 0:00 [khubd] root 212 0.0 0.0 0 0 ? S< Jun05 0:00 [kseriod] root 302 0.0 0.0 0 0 ? S Jun05 0:00 [khungtaskd] root 303 0.0 0.0 0 0 ? S Jun05 0:00 [pdflush] root 304 0.0 0.0 0 0 ? S Jun05 0:01 [pdflush] root 305 0.0 0.0 0 0 ? S< Jun05 0:05 [kswapd0] root 306 0.0 0.0 0 0 ? S< Jun05 0:00 [aio/0] root 307 0.0 0.0 0 0 ? S< Jun05 0:00 [aio/1] root 308 0.0 0.0 0 0 ? S< Jun05 0:00 [aio/2] root 309 0.0 0.0 0 0 ? S< Jun05 0:00 [aio/3] root 515 0.0 0.0 0 0 ? S< Jun05 0:00 [kpsmoused] root 582 0.0 0.0 0 0 ? S< Jun05 0:00 [mpt_poll_0] root 583 0.0 0.0 0 0 ? S< Jun05 0:00 [mpt/0] root 584 0.0 0.0 0 0 ? S< Jun05 0:00 [scsi_eh_0] root 590 0.0 0.0 0 0 ? S< Jun05 0:00 [ata/0] root 591 0.0 0.0 0 0 ? S< Jun05 0:00 [ata/1] root 592 0.0 0.0 0 0 ? S< Jun05 0:00 [ata/2] root 593 0.0 0.0 0 0 ? S< Jun05 0:00 [ata/3] root 594 0.0 0.0 0 0 ? S< Jun05 0:00 [ata_aux] root 610 0.0 0.0 0 0 ? S< Jun05 0:00 [kstriped] root 631 0.0 0.0 0 0 ? S< Jun05 0:05 [kjournald] root 656 0.0 0.0 0 0 ? S< Jun05 0:00 [kauditd] root 689 0.0 0.0 13364 928 ? S<s Jun05 0:00 /sbin/udevd -d root 2123 0.0 0.0 0 0 ? S< Jun05 0:00 [kmpathd/0] root 2124 0.0 0.0 0 0 ? S< Jun05 0:00 [kmpathd/1] root 2126 0.0 0.0 0 0 ? S< Jun05 0:00 [kmpathd/2] root 2127 0.0 0.0 0 0 ? S< Jun05 0:00 [kmpathd/3] root 2128 0.0 0.0 0 0 ? S< Jun05 0:00 [kmpath_handlerd] root 2203 0.0 0.0 0 0 ? S< Jun05 0:00 [kjournald] root 2613 0.0 0.0 5908 648 ? Ss Jun05 0:00 syslogd -m 0 root 2617 0.0 0.0 3804 424 ? Ss Jun05 0:00 klogd -x root 2707 0.0 0.0 10760 372 ? Ss Jun05 0:02 irqbalance apache 2910 0.5 0.6 213964 12912 ? S 00:22 0:07 /usr/sbin/httpd dbus 3011 0.0 0.0 21256 904 ? Ss Jun05 0:00 dbus-daemon --system root 3025 0.0 0.0 3800 576 ? Ss Jun05 0:00 /usr/sbin/acpid 68 3038 0.0 0.2 31152 4336 ? Ss Jun05 0:01 hald root 3039 0.0 0.0 21692 1176 ? S Jun05 0:00 hald-runner 68 3046 0.0 0.0 12324 856 ? S Jun05 0:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.s 68 3052 0.0 0.0 12324 856 ? S Jun05 0:00 hald-addon-keyboard: listening on /dev/input/event0 root 3105 0.0 0.0 62624 1212 ? Ss Jun05 0:00 /usr/sbin/sshd root 3264 0.0 0.0 74820 1156 ? Ss Jun05 0:00 crond root 3292 0.0 0.0 18416 472 ? S Jun05 0:00 /usr/sbin/smartd -q never root 3300 0.0 0.0 3792 480 tty2 Ss+ Jun05 0:00 /sbin/mingetty tty2 root 3301 0.0 0.0 3792 480 tty3 Ss+ Jun05 0:00 /sbin/mingetty tty3 root 3302 0.0 0.0 3792 484 tty4 Ss+ Jun05 0:00 /sbin/mingetty tty4 root 3304 0.0 0.0 3792 480 tty5 Ss+ Jun05 0:00 /sbin/mingetty tty5 root 3306 0.0 0.0 3792 480 tty6 Ss+ Jun05 0:00 /sbin/mingetty tty6 apache 5158 0.4 0.5 211896 11848 ? S 00:28 0:04 /usr/sbin/httpd apache 5519 0.4 0.5 211896 11992 ? S 00:29 0:03 /usr/sbin/httpd root 5649 0.0 0.0 63848 1184 pts/0 S Jun05 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --soc mysql 5696 2.1 1.9 411060 40392 pts/0 Rl Jun05 2:01 /usr/libexec/mysqld --basedir=/usr --datadir=/var/lib/mysql apache 5943 0.4 0.5 211896 12000 ? S 00:30 0:03 /usr/sbin/httpd apache 5976 0.6 0.5 211896 11792 ? S 00:30 0:04 /usr/sbin/httpd apache 6073 0.4 0.5 211896 11208 ? S 00:31 0:03 /usr/sbin/httpd apache 6122 0.4 0.5 211896 11848 ? S 00:31 0:03 /usr/sbin/httpd apache 6128 0.3 0.5 211896 11940 ? S 00:31 0:02 /usr/sbin/httpd apache 6159 0.5 0.5 211896 11872 ? S 00:31 0:04 /usr/sbin/httpd apache 6636 0.4 0.6 213960 13444 ? S 00:32 0:02 /usr/sbin/httpd apache 6787 0.3 0.5 211884 11308 ? S 00:33 0:02 /usr/sbin/httpd apache 6796 0.4 0.5 211884 12024 ? S 00:33 0:02 /usr/sbin/httpd apache 6801 0.3 0.5 211896 11920 ? S 00:33 0:01 /usr/sbin/httpd apache 6804 0.4 0.5 211884 11848 ? S 00:33 0:02 /usr/sbin/httpd apache 6825 0.4 0.5 211896 11972 ? S 00:33 0:02 /usr/sbin/httpd apache 6866 0.3 0.5 210860 11044 ? S 00:33 0:01 /usr/sbin/httpd apache 6870 0.2 0.5 211896 11108 ? S 00:33 0:01 /usr/sbin/httpd apache 6872 0.3 0.5 211896 11900 ? S 00:33 0:01 /usr/sbin/httpd apache 6993 0.3 0.5 211896 11836 ? S 00:33 0:02 /usr/sbin/httpd apache 6994 0.3 0.5 211896 11792 ? S 00:33 0:01 /usr/sbin/httpd apache 7136 0.2 0.5 211896 11432 ? S 00:34 0:01 /usr/sbin/httpd apache 7143 0.2 0.5 210860 11052 ? S 00:34 0:01 /usr/sbin/httpd apache 7145 0.2 0.5 211896 11136 ? S 00:34 0:01 /usr/sbin/httpd apache 7266 0.2 0.6 213952 12748 ? S 00:34 0:01 /usr/sbin/httpd apache 7299 0.2 0.5 211884 11276 ? S 00:34 0:01 /usr/sbin/httpd apache 7311 0.2 0.5 211884 11300 ? S 00:34 0:01 /usr/sbin/httpd apache 7313 0.3 0.5 211884 11876 ? S 00:34 0:01 /usr/sbin/httpd apache 7345 0.2 0.5 210872 11100 ? S 00:34 0:01 /usr/sbin/httpd apache 7349 0.2 0.5 210860 11008 ? S 00:34 0:01 /usr/sbin/httpd apache 7350 0.2 0.5 211896 11832 ? S 00:34 0:01 /usr/sbin/httpd apache 7351 0.1 0.5 211884 11072 ? S 00:34 0:00 /usr/sbin/httpd apache 7352 0.2 0.5 210872 11096 ? S 00:34 0:01 /usr/sbin/httpd apache 7449 0.1 0.5 210860 11020 ? S 00:35 0:00 /usr/sbin/httpd root 7490 0.3 0.0 0 0 ? S Jun05 3:11 [vmmemctl] root 7597 0.0 0.0 72656 1260 ? Ss Jun05 0:06 /usr/lib/vmware-tools/sbin64/vmware-guestd --background /va apache 7720 0.1 0.5 210860 10748 ? S 00:36 0:00 /usr/sbin/httpd apache 7726 0.1 0.4 209836 9304 ? R 00:36 0:00 /usr/sbin/httpd apache 7727 0.1 0.5 210860 10916 ? S 00:36 0:00 /usr/sbin/httpd apache 7731 0.1 0.5 210860 10780 ? S 00:36 0:00 /usr/sbin/httpd apache 7732 0.3 0.5 210860 10916 ? S 00:36 0:01 /usr/sbin/httpd apache 7733 0.1 0.5 210872 11000 ? S 00:36 0:00 /usr/sbin/httpd apache 7735 0.1 0.5 211884 11048 ? S 00:36 0:00 /usr/sbin/httpd apache 7761 0.1 0.5 210860 10552 ? S 00:36 0:00 /usr/sbin/httpd apache 7776 0.1 0.4 209836 8648 ? R 00:37 0:00 /usr/sbin/httpd apache 7790 0.2 0.3 208812 7724 ? R 00:40 0:00 /usr/sbin/httpd apache 7800 0.2 0.3 208812 8088 ? R 00:40 0:00 /usr/sbin/httpd root 7801 0.0 0.0 3792 484 tty1 Ss+ 00:41 0:00 /sbin/mingetty tty1 apache 7820 0.2 0.3 208812 7552 ? R 00:41 0:00 /usr/sbin/httpd apache 7834 0.2 0.3 207788 6756 ? R 00:42 0:00 /usr/sbin/httpd apache 7864 0.2 0.2 207788 6148 ? R 00:42 0:00 /usr/sbin/httpd apache 7872 0.3 0.2 207788 5856 ? R 00:43 0:00 /usr/sbin/httpd apache 7874 2.5 0.3 207788 6336 ? R 00:43 0:00 /usr/sbin/httpd root 7875 0.3 0.0 63844 1056 ? S 00:43 0:00 sh -c lsb_release -sd 2>/dev/null root 7879 1.6 0.0 65604 964 pts/0 R+ 00:43 0:00 ps aux root 16316 0.0 0.1 90128 3272 ? Ss Jun05 0:00 sshd: milanb [priv] milanb 16358 0.0 0.0 90128 1752 ? S Jun05 0:00 sshd: milanb@pts/0 milanb 16360 0.0 0.0 66076 1480 pts/0 Ss Jun05 0:00 -bash root 16875 0.0 0.0 101068 1324 pts/0 S Jun05 0:00 su - root 16877 0.0 0.0 66184 1692 pts/0 S Jun05 0:00 -bash root 24373 0.0 0.3 206764 7348 ? Rs Jun05 0:01 /usr/sbin/httpd

    Read the article

< Previous Page | 30 31 32 33 34