Search Results

Search found 36498 results on 1460 pages for 'linux usb drive'.

Page 34/1460 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• Ubuntu 11.10 USB 3.0 HDD

  - by Chazm

  I have a problem with my external HDD (WD My Book Essential 1TB) working on USB 3.0 port. I'm using dual boot setup with Windows 7 and Ubuntu 11.10, both 64 bit. While I'm running Windows and rebooting back to Windows everything works well. When I'm switchin to ubuntu everything works great as well. But after 1st reboot from ubuntu neither windows nor ubuntu mount the external drive. I have to reboot the device manually. I suspect that the problem is with unmounting the device on shutdown on ubuntu. The case concern only usb 3.0. When i plug the same device into usb 2 port the problem doesn't persist. Does any1 hit the same problem or have a clue what might goin wrong?

  Read the article

• Windows 7 immediately disconnects a USB drive

  - by Daniel Saner

  I am having a problem with Windows 7 x64 consistently disconnecting one specific USB mass storage drive immediately after it is connected. The drive in question is a Cowon C2 digital music player which works in standard mass storage controller mode (i.e. no device-specific drivers needed/available). When I connect the player, Windows plays the "USB connect" sound and the device appears (under its correct name) in the device manager, but it never appears as a drive. The player itself displays "USB Connected" for a split-second before reporting that it has been disconnected again. Since the player, by design, reboots after it has been disconnected, Windows plays the "USB disconnect" sound before restarting the whole cycle once the player has powered back on. I am connecting the player through an Intel X79 Chipset motherboard (Gigabyte GA-X79-UD3) to Windows 7 Pro 64-bit. The player used to work fine the first few times I connected it, showing up as an external drive; it only recently stopped working. It is not a problem with the player, since it works fine when connected to another computer, even such running the exact same operating system. It is also not a problem with the USB controller, since the issue is the same on both the Intel USB 2.0 and the Fresco Logic FL1009 USB 3.0 controller ports. I have also not had the problem with any other drive so far. Among the things I have tried so far: Disabling USB legacy mode in BIOS Disabling energy-saving power down for all USB controllers in Windows' device manager Removing and reinstalling Windows' USB mass storage driver Removing and reinstalling Intel and Fresco Logic USB controller driver Restoring the player to factory defaults None of these made a difference. Again, the player used to work fine on the exact same system just days ago; I didn't install any new hardware or drivers on it since then. I would be very grateful for any hints on what else to try. Edit: Here is another new hint; I found out that when I connect the drive before booting Windows, it is available in Windows Explorer as it should, and does not automatically disconnect. If I remove and reconnect it though, the infinite connect/disconnect-loop starts anew.

  Read the article

• Which Linux is the most efficient?

  - by quandary

  Simple question: There is a gazillion Linux distributions out there. Which one (distribution/incl. window manager) makes (technically) the most efficient use of my (aging) computer ? I have appx. 1 GB RAM and a 1.6 GHz processor, 120 GB hd. I develop applications (C++/.NET/mono/ASP/PostGre SQL/). Usually, I prefer distros with apt-get. Anybody knows which one takes the most care of my limited RAM, and wich one is the fastest/slimmest of them all, that has a decent repo and is damn fast)

  Read the article

• Atheros LAN card driver, Linux compiling problem

  - by Ali Qocayev

  I have installed openSUSE 11.4 to my new workstation. It says that there is Attansic ETHERNET controller on board. But no devices seen. I typed: lspci and it returned: atheros communications device 1083. I have downloaded drivers. I'm trying to compile the driver. But I get the error: **Makefile:94: Linux kernel source not configured - missing autoconf.h. Stop** But I see autoconf.h presents on my system. What should I do ?

  Read the article

• Middle Mouse Button does not work in XFCE / Arch Linux

  - by Alp

  I have the XFCE desktop manager installed on my Arch Linux system. With E17 (Enlightenment desktop manager) i had no problems with my mouse: all buttons worked correctly out of the box. But in XFCE my middle mouse button does not fire an event at all (no output with xev). Evdev seems to identify my mouse correctly (Razer Deathadder) because it echoes its name in the xorg logs. I have no idea what could cause this and how to debug the problem. I start both e17 and xfce with startx. Here is my ~/.xinitrc: exec startxfce4 --with-ck-launch #exec enlightenment-start

  Read the article

• Is Flash typically slow on Linux?

  - by CSarnia

  Specifically, I'm running Mint 8 (Helena). I'm extremely new to Linux, and was searching for a solution that was user-friendly and GUI oriented. The box won't be used for much other than web browsing and word processing. Anyway, it runs relatively smoothly, except for Youtube videos... especially full-screen, which runs at like 1 FPS, and even after closing, slows Firefox to a crawl until I restart it. I'd seen an xkcd comic on the matter, but regarded it as a joke until now. Is this actually a problem? Are there any remedies I can try to smooth the applications?

  Read the article

• How to remap CAPSLOCK to ESC in Linux Mint 12

  - by imcoddy

  I would like to remap the CAPSLOCK key to ESC as this is easier to use in Vim. I can make it in Ubuntu 11.04 as there's an option for this in Keyborad configuration. But recently I switched to use Linux Mint and found that there's no such option. I don't know whether it is the gnome3 that makes this happen, as there are only some basic features to customize. Hoping someone can help me remap the key, thanks in advance. found this article, but the options are not found in Mint 12

  Read the article

• Running bridged-networking vmware player on a Linux machine with 2 interfaces

  - by Roman D

  I have got a laptop running Arch Linux with 2 interfaces: wireless (wlan0) and ethernet (eth0). I use wlan0 to access internet (static IP, networking is configured using netcfg), and I connect a second PC to the eth0. Now, whenever I start vmware player (v. 4.0.4), it chooses wlan0 to connect its bridged virtual NIC to, but I need it to connect to eth0 (I want my guest machine to be able to talk to the second physical PC on eth0). So, I disable the wlan0 interface (netcfg -d wireless) and restart vmware. Now, it connects to eth0, and everything works fine; I can ping the host PC from the virtual one, and I can ping the virtual PC from the second physical PC connected to eth0. Then, if I try to reenable the wlan0 interface (netcfg -u wireless), all of the connectivity between the host and the guest (and between the second physical PC and the guest) gets lost, until I disable wlan0 again. Can someone please give me a hint on what's going on?

  Read the article

• Yggdrasil : Oldest Linux Distribution !

  - by Arkapravo

  Just for historical aspects, I was interested in knowing which was the first commercial Linux distro ! .... I found that it was Yggdrasil in 1992. I wanted to try it out (I doubt it will work with Virtual Box ! )..... but instead of an iso all I got was the source files , can someone please help me to install Yggdrasil from it ? I just wish to see which was the starting point of this distro revolution ! Is there anyone who has used Yggdrasil ?

  Read the article

• Linux - Debian - Original groups that a user is in

  - by Auxiliary

  This is embarrassing; I used the usermod command to add myself to the disk group. However I forgot to use the append option! so I'm not a member of any of the groups that I was originally, now terminal says that I'm not even a sudoer (How rude!). So the question is: What are the original groups that a normal Administrator type of user is in? BTW, I am using Linux Mint Debian Edition (LMDE). Any help is appreciated.

  Read the article

• Problems in Linux Mint 13 MATE with NTFS partitions

  - by usr

  I'm using Linux Mint 13 MATE (32 bit). With Caja file manager (based on Nautilus 2.x) I can create, modify and remove folders and files on NTFS partitions whitout problems. But, for example, when I have a compressed file (.zip, .7z, ...) in a NTFS partition I can't extract it (with File-Roller, Peazip, ...). But I can extract the same file in a ext4 partition perfectly. What might the problem be? Are there (maybe) file permissions for each application?

  Read the article

• How do I get an Enter USB TV Box TV tuner aka Gadmei UTV302 to work?

  - by Subhash

  Has anyone had any success in using the Enter USB TV Box from Enter Multimedia? It comes bundled with software that works in Windows. I have had no luck using it in Ubuntu 10.10. Update 1 Here is the output from lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 004 Device 002: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 006: ID 1f71:3301 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub I can't find the Enter USB TV Box listed in this. In the dmesg tail command, I found something that seems to be related to the card: usb 1-5: new high speed USB device using ehci_hcd and address 6 usb 1-5: config 1 interface 0 altsetting 1 bulk endpoint 0x83 has invalid maxpacket 256 Update 2 From Windows I learned that this USB TV tuner uses some chipset from Gadmei corporation. All computer stores in India sell Enter USB TV Box if you ask for an USB TV tuner. No other brand seems to be interested in this market. Update 3 I learned that this TV tuner is rebranded version of Gadmei UTV302 (USB TV Tuner Box). Update 4 I tried adding em28xx as the chipset (as suggested by user BOBBO below) for the tuner but that did not work. I went back to my Pinnacle PCTV internal card. I don't think the tuner referred by UbuntuForums (Gadmei UTV 330) and the tuner that I have (Gadmei UTV 302) are the same. My USB tuner is several times bigger. My tuner seems to be a newer device with a newer tuner chip. I will submit details of this device to the LinuxTV developers this weekend. Update 5 I opened the tuner box and found that it uses a tuner from a Chinese company - Tenas. Model is TNF 8022-DFA. Update 6 Tuner chip specs (retrived from supplier directory) for Tenas TNF 8022-DFA. Supply voltage: true 5V device(low power dissipation) Control system: I2C bus control of tuning, address selection Tuning system: PLL controlled tuning Receiving system: system PAL D/K,IF(Intermediate Frequency): 38MHz Receiving channels: full frequency range from channel DS1 (49.75MHz) to channel DS57 (863.25MHz); Use Texas Instruments SN761678 IC solution, with mini install size Update 7 Reverse side of the circuit board. Picture of the TV tuner

  Read the article

• USB and CD data cannot be read or mounted in 12.10

  - by aravind4j

  I'm using Ubuntu 12.10. I wrote a data disk using Brasero Disk Burner, but the system cannot read the CD. I tried to write the same data into my HP v220w pen drive but now there is an error in that too. It shows the following: Error mounting /dev/sdb at /media/aravind4j/Aravind4j: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdb" "/media/aravind4j/Aravind4j"' exited with non-zero exit status 13: $MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. (udisks-error-quark, 0) I used a NTFS file system for the pen drive as you can recognize from the above statement. I would like to recover the files so please help me recover the files without formatting the drive.

  Read the article

• Running Ubuntu Server from a USB key / thumb drive (being mindful of flash's write limitations)

  - by andybjackson

  Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and a ZFS RAID-Z array for data. I settled on this configuration after trying and regretfully rejecting FreeNAS because the Logitech Media Server (LMS) software isn't available on the AMD64 flavour of this platform and because I think Debian/Ubuntu server is a better future-proof platform. I considered Open Media Vault, but concluded that it isn't quite yet ready for my purposes. That said, FreeNAS does include the option to run itself off a 2GB+ flash device like USB key or thumb drive. Apparently FreeNAS is mindful of the write limitations of flash devices and so creates virtual disks for running the OS, writing only the required configuration information back to flash. This would give me an extra data drive slot. Q: Can Ubuntu Server be configured sensibly to run off a flash device such as a USB key/thumb drive? If so, how? The write limitations of flash should be accounted for.

  Read the article

• What is casper rw loop file and why do I need it to make saving persistant on usb flash drive?

  - by l245c4l

  Suppose I've installed linux on my flash drive. Why do I need something like casper loop file to make saving persistant? So files are being erased? Isn't flash drive the same as actual hard drive? I'm linux noob so be patient. Or it is because linux on flash drive is actually live cd on flash drive? Can it be installed just like it is installed on hard drive? Thanks in advance

  Read the article

• USB Harddisk not working on dual boot windows7/8

  - by Jesper

  Yesterday I installed Windows 8 on a machine that already had Windows 7. They are on dual boot and both systems work fine. The problem is that inserting a USB hard disk in either system does nothing. If I connect a USB mouse or mobile phone, they work fine, so the USB plugs are active/working and the USB hard drives that I am trying to connect work on my other laptop just fine. I have tried to uninstall all USB-related items in Device Manager and let them reinstall upon restart, but that didn't help. The USB drive does not show up in disk management either. The strange thing is that it is exactly the same situation on both windows. USB mice etc. work just fine and USB hard drives do not. Any ideas on solving this problem would be great. ...Don't know if it is important, but this is a Toshiba Tecra R950 Laptop. EDIT: I have found out that my other USB HD (Western Digital) works on this laptop, but for my StoreJet Transcend and Adata "something" does not work. All three work on another Windows 7 laptop. Sizewise the WD is in the middle at 400 GB. The StoreJet is 640 GB and the Adata is 200 GB.

  Read the article

• Troubles Installing Windows 7 via USB. Flat install?

  - by Brian

  Hi friends, I've been struggling with this for a while. Windows 7 64-bit Enterprise edition just will not install on my Shuttle K45 system via a USB key. It hangs out during the install while copying files or while creating the partitions. The system is pretty standard and low-tech: IDE hard drives, no CD, 2G RAM. I am not sure what of the problem. Other than the Shuttle, I have a Apple MacBook Pro. On the MPB, I am running OS X, and Mint Linux and Window XP over Parallels. I have an ISO of Win7 that works (I installed it as a Parallels VM to make sure). I have used UltraISO and MS Windows 7 USB/DVD Download Tool to write it to the 8G USB key. Both seem to copy all the files correctly (with UltraISO, I asked it to verify). It boots via USB and the install looks just fine. Until it hangs, most of the time with a copying error of 0x80070241. So now I am trying to figure out if there are other ways I can install Windows 7 on this Shuttle system that has no CD drive. I've heard about a flat installation, however those all seem to be doing something from within Windows. I do have access to a command prompt from the Windows 7 install. Does anyone know if/how I can prep the Shuttle hard drive with Windows 7 installation and have Windows 7 install from the hard disk. I do not have an external enclosure for the IDE HD and I do not have any other system I can hook up to the hard drives. I do have an external Maxtor OneTouch drive available.

  Read the article

• linux nooB: Installing ffmpeg + dependencies on aws linux ami (repo issues)

  - by HdN8

  Im installing ffmpeg to run on an amazon linux ami, and have added the rpmforge repo and the dag repo. Here are some guidelines I'm using for reference: TWoZaO and Razuna The rpmforge repo has ffmpeg, but if you try to install it then it will complain that is missing dependencies (for me libSDL-1.2.so.0()(64bit)). Regardless I will install ffmpeg from svn so I can be sure to enable the options I want (namely libx264). It seems strange to me though that SDL is not in rpmforge or dag, and in according to both of my references above, it should be there. I tried to grab it manually from here, but it needs these dependencies, so no-go: error: Failed dependencies: SDL = 1.2.10-8.el5 is needed by SDL-devel-1.2.10-8.el5.x86_64 alsa-lib-devel is needed by SDL-devel-1.2.10-8.el5.x86_64 libGL-devel is needed by SDL-devel-1.2.10-8.el5.x86_64 libGLU-devel is needed by SDL-devel-1.2.10-8.el5.x86_64 libSDL-1.2.so.0()(64bit) is needed by SDL-devel-1.2.10-8.el5.x86_64 libX11-devel is needed by SDL-devel-1.2.10-8.el5.x86_64 libXext-devel is needed by SDL-devel-1.2.10-8.el5.x86_64 libXrandr-devel is needed by SDL-devel-1.2.10-8.el5.x86_64 libXrender-devel is needed by SDL-devel-1.2.10-8.el5.x86_64 libXt-devel is needed by SDL-devel-1.2.10-8.el5.x86_64 Any advice for a linux nooB lost in a mess of repos and dependency errors?

  Read the article

• How to format a USB stick

  - by VictorL

  My USB stick looks dead : victor@X301A1:~$ umount /dev/sdc1 victor@X301A1:~$ sudo mkfs -t vfat /dev/sdc1 mkfs.vfat 3.0.12 (29 Oct 2011) mkfs.vfat: unable to open /dev/sdc1: Read-only file system victor@X301A1:~$ sudo hdparm -r0 /dev/sdc1 /dev/sdc1: setting readonly to 0 (off) readonly = 0 (off) victor@X301A1:~$ sudo fsck -n /dev/sdc1 fsck de util-linux 2.20.1 dosfsck 3.0.12, 29 Oct 2011, FAT32, LFN /.Trash-1000/files/sans_titre Start does point to root directory. Deleting dir. /.Trash-1000/files/Bus CAN Start does point to root directory. Deleting dir. Reclaimed 190903 unused clusters (781938688 bytes). Free cluster summary wrong (1001897 vs. really 1383698) Auto-correcting. Leaving file system unchanged. /dev/sdc1: 8052 files, 566660/1950358 clusters Is there anyway for me to recover my USB stick ? Thank

  Read the article

• USB install from second internal hard drive in a MacBook Pro

  - by aaron.anderson

  I am trying to install Ubuntu (among others) on a second internal hard drive on my MacBook Pro. I have an 80 GB internal SSD with OS X on it, along with a 750 GB internal HD with a few partitions, one of which being for Ubuntu. I currently have rEFInd installed for switching between the OS's. I was wondering how one would go about installing Ubuntu from the USB install stick. I have followed the instructions on creating a bootable USB. Once this is bootable, could I just hold the Option key on startup, and it should appear in the menu? Or am I missing something?

  Read the article

• Installing Ubuntu on a computer with USB 3.0 hardware

  - by Matt

  I'm installing Ubuntu 10.10 32-bit version on an HP Envy 15. I get the same problem these people have here: "unable to find a medium containing a live file system" error when installing but the question was never resolved. I spent so long researching and got so frustrated that I took my computer down to a shop and asked them to install it for me. It took them a while but they managed to get it installed. The reason for this error they had said was because Ubuntu didn't have the USB 3.0 drivers it needed to install properly. I'm reinstalling Ubuntu yet again and I've run into the same issue so my question is: does anyone know.. a) Where to get these USB 3.0 drivers? b) How to get them installed when installing the Ubuntu OS? Thanks, Matt

  Read the article

• How to stop a infinite running process(ztail) started by a ssh session after that session is closed

  - by Sanath Adiga

  I have a peculiar problem. My server supports multiple ssh session simultaneously, so that multiple admins can manage it simultaneously. We have a command which calls ztail to show the compressed log files and when the current ssh session is closed (without pressing ctrlc, to stop the tail command), the command should ideally stop working. But what I observed when I start a new ssh session is that the process ztail is still running in the background and consuming CPU, even though the previous session was closed. How can I determine when the session is closed, so that I can use that variable/flag to close/stop any commands initiated by that previously closed session?

  Read the article

• Oracle Linux / Symantec Partnership

  - by Ted Davis

  Fred Astaire and Ginger Rogers sang the now famous lyrics:  “You like to-may-toes and I like to-mah-toes”. In the tech world, is it Semantic or is it Symantec? Ah, well, we know it’s the latter. Actually, who doesn’t know or hasn’t heard of Symantec in the tech world? Symantec is thoroughly engrained in Enterprise customer infrastructure from their Storage Foundation Suite to their Anti-Virus products. It would be hard to find anyone who doesn’t use their software. Likewise, Oracle Linux is thoroughly engrained in Enterprise infrastructure – so our paths cross quite a bit. This is why the Oracle Linux  engineering team works with Symantec to make sure their applications and agents are supported on Oracle Linux. We also want to make sure the Oracle Linux / Symantec customer experience is trouble free so customer work continues at the same blistering pace. Here are a few Symantec applications that are supported on Oracle Linux: Storage Foundation Netbackup Enterprise Server Symantec Antivirus For Linux Veritas Cluster Server Backup Exec Agent for Linux So, while Fred and Ginger may disagree on how to spell tomato, for our software customers, the Oracle / Symantec partnership works together so our joint customers experience and hear the sweet song of success.

  Read the article

• question about 12.10 32 bit syslinux 4.06 EDD 2012-10-23 usb direct boot

  - by logan

  alright so guys i am trying to do a direct boot for Ubuntu 12.10 (as stated in the topic) i have been trying to do a direct boot for about ten minutes now. so i have to do a direct boot because my original OS has a corrupted kernel (i am trying to fix a friends laptop) Toshiba satellite C655D-S5518 anyway getting back to the main point when i put the usb in everything starts up fine it loads the usb then it goes to this screen saying "SYSLINUX 4.06 EDD 2012-10-23 Copyright (C) 1994-2012 H. Peter Anvin et al." also getting a blinking line (as if i could put something in however when i try to type it does not show up so im guessing its telling me it is loading) However i am not getting a corrupted file or any kind of file error so im guessing my main question is, is this normal? and if so how long does it take for this to be done and what are the steps proceeding this? sorry guys if this is a dumb question i am new to the Ubuntu party haha thanks Logan.

  Read the article

• usb devices unacessible

  - by Dustin

  I have a funny thing happening with my USB devices. They are detected and show up as they should but I cannot write to them, I can read the files in them. I cannot change the Group folder access. It keeps reverting to none when I try change it. However when I start a guest session and copy a screen shot to the USB I can, but cannot in my regular administration session. Why cannot I change the option and why does it behave properly in a guest session but not normally? Anyone know how to help me out here? I am using Ubuntu 12.04, 32-bit.

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >