Search Results

Search found 4343 results on 174 pages for 'man in the middle'.

Page 34/174 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • partial string matching - R

    - by DonDyck
    I need to write a query in R to match partial string in column names. I am looking for something similar to LIKE operator in SQL. For e.g, if I know beginning, middle or end part of the string I would write the query in format: LIKE 'beginning%middle%' in SQL and it would return matching strings. In pmatch or grep it seems I can only specify 'beginning' , 'end' and not the order. Is there any similar function in R that I am looking for? For example, say I am looking in the vector: y<- c("I am looking for a dog", "looking for a new dog", "a dog", "I am just looking") Lets say I want to write a query which picks "looking for a new dog" and I know start of the string is "looking" and end of string is "dog". If I do a grep("dog",y) it will return 1,2,3. Is there any way I can specify beginning and end in grep?

    Read the article

  • Splitting a raidctl mirror safely

    - by milkfilk
    I have a Sun T5220 server with the onboard LSI card and two disks that were in a RAID 1 mirror. The data is not important right now but we had a failed disk and are trying to understand how to do this for real if we had to recover from a failure. The initial situation looked like this: # raidctl -l c1t0d0 Volume Size Stripe Status Cache RAID Sub Size Level Disk ---------------------------------------------------------------- c1t0d0 136.6G N/A DEGRADED OFF RAID1 0.1.0 136.6G GOOD N/A 136.6G FAILED Green light on the 0.0.0 disk. Find / lights up the 0.1.0 disk. So I know I have a bad drive and which one it is. Server still boots obviously. First, we tried putting a new disk in. This disk came from an unknown source. Format would not see it, cfgadm -al would not see it so raidctl -l would not see it. I figure it's bad. We tried another disk from another spare server: # raidctl -c c1t1d0 c1t0d0 (where t1 is my good disk - 0.1.0) Disk has occupied space. Also the different syntax options don't change anything: # raidctl -C "0.1.0 0.0.0" -r 1 1 Disk has occupied space. # raidctl -C "0.1.0 0.0.0" 1 Disk has occupied space. Ok. Maybe this is because the disk from the spare server had a RAID 1 on it already. Aha, I can see another volume in raidctl: # raidctl -l Controller: 1 Volume:c1t1d0 (this is my server's root mirror) Volume:c1t132d0 (this is the foreign root mirror) Disk: 0.0.0 Disk: 0.1.0 ... No problem. I don't care about the data, I'll just delete the foreign mirror. # raidctl -d c1t132d0 (warning about data deletion but it works) At this point, /usr/bin/ binaries freak out. By that I mean, ls -l /usr/bin/which shows 1.4k but cat /usr/bin/which gives me a newline. Great, I just blew away the binaries (ie: binaries in mem still work)? I bounce the box. It all comes back fine. WTF. Anyway, back to recreating my mirror. # raidctl -l Controller: 1 Volume:c1t1d0 (this is my server's root mirror) Disk: 0.0.0 Disk: 0.1.0 ... Man says that you can delete a mirror and it will split it. Ok, I'll delete the root mirror. # raidctl -d c1t0d0 Array in use. (this might not be the exact error) I googled this and found of course you can't do this (even with -f) while booted off the mirror. Ok. I boot cdrom -s and deleted the volume. Now I have one disk that has a type of "LSI-Logical-Volume" on c1t1d0 (where my data is) and a brand new "Hitachi 146GB" on c1t0d0 (what I'm trying to mirror to): (booted off the CD) # raidctl -c c1t1d0 c1t0d0 (man says it's source destination for mirroring) Illegal Array Layout. # raidctl -C "0.1.0 0.0.0" -r 1 1 (alt syntax per man) Illegal Array Layout. # raidctl -C "0.1.0 0.0.0" 1 (assumes raid1, no help) Illegal Array Layout. Same size disks, same manufacturer but I did delete the volume instead of throwing in a blank disk and waiting for it to resync. Maybe this was a critical error. I tried selecting the type in format for my good disk to be a plain 146gb disk but it resets the partition table which I'm pretty sure would wipe the data (bad if this was production). Am I boned? Anyone have experience with breaking and resyncing a mirror? There's nothing on Google about "Illegal Array Layout" so here's my contrib to the search gods.

    Read the article

  • Install Intel USB 3.0 eXtensible Host Controller Driver for Windows Server 2008 R2 x64

    - by ffrugone
    According to Intel and Dell, by board is technically a 'desktop' board and they therefore do not support Intel USB 3.0 eXtensible Host Controller drivers for Windows Server 2008 (R2 x64). I'm trying to find a workaround. I found an entry on someone who tried to tackle this, but I can't make his fix work for me. Below, I have copied both his entry, and my reply. I'm a loyal stackoverflow user, and hopefully the people here at serverfault can help me: anyforumuser Re: GA-Z77X-UD5H USB3 Drivers not installing? « Reply #6 on: July 05, 2012, 04:12:59 am » Thanks to JoeMiner , his process for the network drivers gave me the clues to figure out to get the USB3 drivers working. I have got the intel USB3 drivers working at full speed in win server 2008r2 you have to edit the following file : 1. mup.xml in change the "Windows7" to "W2K8" 2. in setup.if2 under [groups] line starting with "HSCSDRIVER " change the "IsOS( ... )" entry to "IsOS(WIN2008_R2,WIN2008_R2_MAXSP)" inf files for all copy the content of the [Intel.NTAMD64.6.1] group to the [Intel.NTAMD64.6.2] group driver folders. here i am not entirely sure which is correct so there are some double up's. in the drivers folder copy the "Win7" folder to "win2008" , "win2008_r2" and "x64" ie your drivers folder should now contain the "win2008" , "win2008_r2" and "x64" folders and they contain contents of the win7 folder (the inf files should of already been fixed) Run install , It should install properly and work now. You will have to reboot If it doesn't work remove the intel usb3 controllers from device manager and get it to "scan for hardware changes" Good luck !!! benevida Re: GA-Z77X-UD5H Intel Network Drivers not installing? « Reply #7 on: August 13, 2012, 02:21:14 pm » Thank you anyforumuser! A process for getting this driver installed was exactly what I needed. However, I've hit a snag. I believe I've followed every step exactly as written, but I'm getting an error during installation. I get the message "One or more files that are required for installation are either missing or corrupted. Setup will exit." Behind the error, the 'Setup Progress' shows the current step as "Copying File: C:\Program Files (x86)\Intel\Intel(R) USB 3.0 eXtensible Host Controller Driver\Drivers\iusb3xhc.man". I've checked the installation files, and iusb3xhc.man seems to be a viable file in all of the Windows 2008 sub-directories of the Drivers folder. Therefore I don't see how the file could be missing and I doubt that it is corrupted, (although it does NOT exist in the \Drivers\HCSwitch folder). I opened 'Setup.if2', and there are two aspects to the step of copying iusb3xhc.man that caught my eye. First, the steps immediately preceding are set to 'error=ignore'. If they hadn't completed successfully, this is the first step where we'd hear about it. Second, this is the first step where the relative path '%source%\drivers\%_os%\%_ia%\' is used. If I haven't named the Windows 2008 sub-directories correctly, I could see where things are fouling up. In any event, if someone could take a look and make suggestions I'd appreciate it. Thank you.

    Read the article

  • Installing rtorrent on my ubuntu server

    - by Shishant
    Hello, I am try to install rtorrent on my ubuntu server. I ran these commands and they worked fine. ./autogen.sh ./configure --with-xmlrpc-c make and then when i tried to use make install i guess it didnt get install because no .rtorrent.rc' was created in home directory and running rtorrent returned this error rtorrent: error while loading shared libraries: libtorrent.so.11: cannot open shared object file: No such file or directory below is the log of my make install. root@ubuntu:~/rtorrent-0.8.6# make install Making install in doc make[1]: Entering directory `/root/rtorrent-0.8.6/doc' make[2]: Entering directory `/root/rtorrent-0.8.6/doc' make[2]: Nothing to be done for `install-exec-am'. test -z "/usr/local/share/man/man1" || /bin/mkdir -p "/usr/local/share/man/man1" /usr/bin/install -c -m 644 './rtorrent.1' '/usr/local/share/man/man1/rtorrent.1 ' make[2]: Leaving directory `/root/rtorrent-0.8.6/doc' make[1]: Leaving directory `/root/rtorrent-0.8.6/doc' Making install in src make[1]: Entering directory `/root/rtorrent-0.8.6/src' Making install in core make[2]: Entering directory `/root/rtorrent-0.8.6/src/core' make[3]: Entering directory `/root/rtorrent-0.8.6/src/core' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/root/rtorrent-0.8.6/src/core' make[2]: Leaving directory `/root/rtorrent-0.8.6/src/core' Making install in display make[2]: Entering directory `/root/rtorrent-0.8.6/src/display' make[3]: Entering directory `/root/rtorrent-0.8.6/src/display' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/root/rtorrent-0.8.6/src/display' make[2]: Leaving directory `/root/rtorrent-0.8.6/src/display' Making install in input make[2]: Entering directory `/root/rtorrent-0.8.6/src/input' make[3]: Entering directory `/root/rtorrent-0.8.6/src/input' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/root/rtorrent-0.8.6/src/input' make[2]: Leaving directory `/root/rtorrent-0.8.6/src/input' Making install in rpc make[2]: Entering directory `/root/rtorrent-0.8.6/src/rpc' make[3]: Entering directory `/root/rtorrent-0.8.6/src/rpc' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/root/rtorrent-0.8.6/src/rpc' make[2]: Leaving directory `/root/rtorrent-0.8.6/src/rpc' Making install in ui make[2]: Entering directory `/root/rtorrent-0.8.6/src/ui' make[3]: Entering directory `/root/rtorrent-0.8.6/src/ui' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/root/rtorrent-0.8.6/src/ui' make[2]: Leaving directory `/root/rtorrent-0.8.6/src/ui' Making install in utils make[2]: Entering directory `/root/rtorrent-0.8.6/src/utils' make[3]: Entering directory `/root/rtorrent-0.8.6/src/utils' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/root/rtorrent-0.8.6/src/utils' make[2]: Leaving directory `/root/rtorrent-0.8.6/src/utils' make[2]: Entering directory `/root/rtorrent-0.8.6/src' make[3]: Entering directory `/root/rtorrent-0.8.6/src' test -z "/usr/local/bin" || /bin/mkdir -p "/usr/local/bin" /bin/bash ../libtool --mode=install /usr/bin/install -c 'rtorrent' '/usr/loc al/bin/rtorrent' libtool: install: /usr/bin/install -c rtorrent /usr/local/bin/rtorrent make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/root/rtorrent-0.8.6/src' make[2]: Leaving directory `/root/rtorrent-0.8.6/src' make[1]: Leaving directory `/root/rtorrent-0.8.6/src' make[1]: Entering directory `/root/rtorrent-0.8.6' make[2]: Entering directory `/root/rtorrent-0.8.6' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/root/rtorrent-0.8.6' make[1]: Leaving directory `/root/rtorrent-0.8.6' Thank You.

    Read the article

  • Google chrome cannot be installed

    - by Zxy
    I downloaded latest version of google chrome and then tried to install it. However it gave me errors. I searched through the net and noticed that most of the people's problem solved when they installed missing dependecies. Therefore I tried to install them too but seems like it does not work. zero@ubuntu:~/Downloads$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages will be REMOVED: google-chrome-stable:i386 0 upgraded, 0 newly installed, 1 to remove and 23 not upgraded. 1 not fully installed or removed. After this operation, 116 MB disk space will be freed. Do you want to continue [Y/n]? Y (Reading database ... 169296 files and directories currently installed.) Removing google-chrome-stable:i386 ... Processing triggers for man-db ... Processing triggers for desktop-file-utils ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for gnome-menus ... zero@ubuntu:~/Downloads$ sudo dpkg -i google-chrome-stable_current_i386.deb Selecting previously unselected package google-chrome-stable:i386. (Reading database ... 169201 files and directories currently installed.) Unpacking google-chrome-stable:i386 (from google-chrome-stable_current_i386.deb) ... dpkg: dependency problems prevent configuration of google-chrome-stable:i386: google-chrome-stable:i386 depends on xdg-utils (>= 1.0.2). dpkg: error processing google-chrome-stable:i386 (--install): dependency problems - leaving unconfigured Processing triggers for desktop-file-utils ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for gnome-menus ... Processing triggers for man-db ... Errors were encountered while processing: google-chrome-stable:i386 Could you please help me? Thanks.

    Read the article

  • I Can't Install or Remove Any Application

    - by berkay gürsoy
    when i try to install or remove an application via either software center or apt-get install they both fail and give some debconf errors below is the log please help.Sorry some of the text is not english. sudo apt-get install aptitude Paket listeleri okunuyor... Bitti Bagimlilik agaci insa ediliyor. Durum bilgisi okunuyor... Bitti Asagidaki ek paketler de yüklenecek: aptitude-common libboost-iostreams1.49.0 libcwidget3 Önerilen paketler: aptitude-doc-en aptitude-doc tasksel debtags libcwidget-dev Asagidaki YENI paketler kurulacak: aptitude aptitude-common libboost-iostreams1.49.0 libcwidget3 Yükseltilen: 0, Yeni Kurulan: 4, Kaldirilacak: 0 ve Yükseltilmeyecek: 48. 8 tam olarak kurulmadi veya kaldirilmadi. Indirilmesi gereken dosya boyutu 0 B/2.498 kB Bu islemden sonra 10,4 MB ek disk alani kullanilacak. Devam etmek istiyor musunuz [E/h]? e Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/Debconf/DbDriver/File.pm line 44, <DEBCONF_CONFIG> chunk 3. Use of uninitialized value in -e at /usr/share/perl5/Debconf/DbDriver/File.pm line 46, <DEBCONF_CONFIG> chunk 3. Use of uninitialized value in pattern match (m//) at /usr/share/perl5/Debconf/DbDriver/File.pm line 47, <DEBCONF_CONFIG> chunk 3. Use of uninitialized value $directory in -d at /usr/share/perl5/Debconf/DbDriver/File.pm line 48, <DEBCONF_CONFIG> chunk 3. Use of uninitialized value $directory in concatenation (.) or string at /usr/share/perl5/Debconf/DbDriver/File.pm line 49, <DEBCONF_CONFIG> chunk 3. debconf: DbDriver "config": mkdir :Böyle bir dosya ya da dizin yok Selecting previously unselected package aptitude-common. dpkg: uyari: files list file for package 'aspell' missing; assuming package has no files currently installed dpkg: uyari: files list file for package 'ubuntu-desktop' missing; assuming package has no files currently installed dpkg: uyari: files list file for package 'vuze' missing; assuming package has no files currently installed dpkg: uyari: files list file for package 'java-wrappers' missing; assuming package has no files currently installed (Veritabani okunuyor... 198988 files and directories currently installed.) Unpacking aptitude-common (from .../aptitude-common_0.6.8.1-2ubuntu1_all.deb) ... Selecting previously unselected package libboost-iostreams1.49.0. Unpacking libboost-iostreams1.49.0 (from .../libboost-iostreams1.49.0_1.49.0-3.1ubuntu1_amd64.deb) ... Selecting previously unselected package libcwidget3. Unpacking libcwidget3 (from .../libcwidget3_0.5.16-3.4ubuntu1_amd64.deb) ... Selecting previously unselected package aptitude. Unpacking aptitude (from .../aptitude_0.6.8.1-2ubuntu1_amd64.deb) ... wicd-daemon (1.7.2.4-2ubuntu1) kuruluyor... Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/Debconf/DbDriver/File.pm line 44, <DEBCONF_CONFIG> chunk 3. Use of uninitialized value in -e at /usr/share/perl5/Debconf/DbDriver/File.pm line 46, <DEBCONF_CONFIG> chunk 3. Use of uninitialized value in pattern match (m//) at /usr/share/perl5/Debconf/DbDriver/File.pm line 47, <DEBCONF_CONFIG> chunk 3. Use of uninitialized value $directory in -d at /usr/share/perl5/Debconf/DbDriver/File.pm line 48, <DEBCONF_CONFIG> chunk 3. Use of uninitialized value $directory in concatenation (.) or string at /usr/share/perl5/Debconf/DbDriver/File.pm line 49, <DEBCONF_CONFIG> chunk 3. debconf: DbDriver "config": mkdir :Böyle bir dosya ya da dizin yok dpkg: error processing wicd-daemon (--configure): installed post-installation script alt islemi çikis durumunda hata döndürdü : 1 man-db (2.6.3-1) kuruluyor... Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/Debconf/DbDriver/File.pm line 44, <DEBCONF_CONFIG> chunk 3. Use of uninitialized value in -e at /usr/share/perl5/Debconf/DbDriver/File.pm line 46, <DEBCONF_CONFIG> chunk 3. Use of uninitialized value in pattern match (m//) at /usr/share/perl5/Debconf/DbDriver/File.pm line 47, <DEBCONF_CONFIG> chunk 3. Use of uninitialized value $directory in -d at /usr/share/perl5/Debconf/DbDriver/File.pm line 48, <DEBCONF_CONFIG> chunk 3. Use of uninitialized value $directory in concatenation (.) or string at /usr/share/perl5/Debconf/DbDriver/File.pm line 49, <DEBCONF_CONFIG> chunk 3. debconf: DbDriver "config": mkdir :Böyle bir dosya ya da dizin yok dpkg: error processing man-db (--configure): installed post-installation script alt islemi çikis durumunda hata döndürdü : 1 dictionaries-common (1.12.10) kuruluyor... Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/Debconf/DbDriver/File.pm line 44, <DEBCONF_CONFIG> chunk 3. Use of uninitialized value in -e at /usr/share/perl5/Debconf/DbDriver/File.pm line 46, <DEBCONF_CONFIG> chunk 3. Use of uninitialized value in pattern match (m//) at /usr/share/perl5/Debconf/DbDriver/File.pm line 47, <DEBCONF_CONFIG> chunk 3. Use of uninitialized value $directory in -d at /usr/share/perl5/Debconf/DbDriver/File.pm line 48, <DEBCONF_CONFIG> chunk 3. Use of uninitialized value $directory in concatenation (.) or string at /usr/share/perl5/Debconf/DbDriver/File.pm line 49, <DEBCONF_CONFIG> chunk 3. debconf: DbDriver "config": mkdir :Böyle bir dosya ya da dizin yok dpkg: error processing dictionaries-common (--configure): installed post-installation script alt islemi çikis durumunda hata döndürdü : 1 dpkg: dependency problems prevent configuration of aspell: aspell depends on dictionaries-common (>> 0.40); bununla beraber: Package dictionaries-common is not configured yet. dpkg: error processing aspell (--configure): bagimlilik sorunlari - yapilandirilmadan birakiliyor dpkg: dependency problems prevent configuration of aspell-en: aspell-en depends on aspell (>= 0.60.3-2); bununla beraber: Package aspell is not configured yet. aspell-en depends on dictionaries-common (>= 0.49.2); bununla beraber: Package dictionaries-common is not configured yet. dpkg: error processing aspell-en (--configure): bagimlilik sorunlari - yapilandirilmadan birakiliyor dpkg: dependency problems prevent configuration of hyphen-en-us: hyphen-en-us depends on dictionaries-common (>= 0.10) | openoffice.org-updatedicts; bununla beraber: Package dictionaries-common is not configured yet. openoffice.org-updatedicts paketi yüklenmedi. Package dictionaries-common which provides openoffice.org-updatedicts is not configured yet. dpkg: error processing hyphen-en-us (--configure): bagimlilik sorunlari - yapilandirilmadan birakiliyor dpkg: dependency problems prevent configuration of wicd-gtk: wicd-gtk depends on wicd-daemon (= 1.7.2.4-2ubuntu1); bununla beraber: Package wicd-daemon is not configured yet. dpkg: error processing wicd-gtk (--configure): bagimlilik sorunlari - yapilandirilmadan birakiliyor dpkg: dependency problems prevent configuration of wicd: wicd depends on wicd-daemon (= 1.7.2.4-2ubuntu1); bununla beraber: Package wicd-daemon is not configured yet. wicd depends on wicd-gtk (= 1.7.2.4-2ubuntu1) | wicd-curses (= 1.7.2.4-2ubuntu1) | wicd-cli (= 1.7.2.4-2ubuntu1) | wicd-client; bununla beraber: Package wicd-gtk is not configured yet. wicd-curses paketi yüklenmedi. wicd-cli paketi yüklenmedi. wicd-client paketi yüklenmedi. Package wicd-gtk which provides wicd-client is not configured yet. dpkg: error processing wicd (--configure): bagimlilik sorunlari - yapilandirilmadan birakiliyor aptitude-common (0.6.8.1-2ubuntu1) kuruluyor... libboost-iostreams1.49.0 (1.49.0-3.1ubuntu1) kuruluyor... libcwidget3 (0.5.16-3.4ubuntu1) kuruluyor... aptitude (0.6.8.1-2ubuntu1) kuruluyor... update-alternatives: using /usr/bin/aptitude-curses to provide /usr/bin/aptitude (aptitude) in Otomatik Mod Processing triggers for libc-bin ... ldconfig deferred processing now taking place Islem sirasinda hatalar bulundu: wicd-daemon man-db dictionaries-common aspell aspell-en hyphen-en-us wicd-gtk wicd E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • Lost all privileges since upgrading to 13.10

    - by Chris Poole
    Since upgrading to 13.10, I no longer have the 'privileges' to do the following things: Mount USB/CDROM drives Run software centre or software updater Press the GUI shut down or restart buttons Unlock my account in the 'settings - user accounts' section (padlock is greyed out) Also, when logging on as a guest user I get error messages relating to Compiz crashing with SIGSEGV and it hangs on a blank wallpaper screen. However, I still am able to use sudo in the terminal. Output of 'groups' is jenchris adm dialout cdrom sudo audio video plugdev lpadmin admin pulse pulse-access sambashare sudo usermod -U username doesn't have any effect Output of sudo dpkg-reconfigure -phigh -a acpid stop/waiting acpid start/running, process 30454 * Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd [ OK ] * Reloading AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd [ OK ] apport stop/waiting apport start/running gpg: key 437D05B5: "Ubuntu Archive Automatic Signing Key <[email protected]>" not changed gpg: key FBB75451: "Ubuntu CD Image Automatic Signing Key <[email protected]>" not changed gpg: key C0B21F32: "Ubuntu Archive Automatic Signing Key (2012) <[email protected]>" not changed gpg: key EFE21092: "Ubuntu CD Image Automatic Signing Key (2012) <[email protected]>" not changed gpg: Total number processed: 4 gpg: unchanged: 4 atd stop/waiting atd start/running, process 1388 avahi-daemon stop/waiting avahi-daemon start/running, process 1521 Rebuilding /usr/share/applications/bamf-2.index... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode update-binfmts: warning: current package is openjdk-7, but binary format already installed by openjdk-6 binfmt-support stop/waiting bluetooth stop/waiting bluetooth start/running, process 4255 update-initramfs: deferring update (trigger activated) /var/lib/dpkg/info/compiz.config: 1: /var/lib/dpkg/info/compiz.config: [general]: not found /var/lib/dpkg/info/compiz.config: 2: /var/lib/dpkg/info/compiz.config: backend: not found /var/lib/dpkg/info/compiz.config: 3: /var/lib/dpkg/info/compiz.config: plugin_list_autosort: not found /var/lib/dpkg/info/compiz.config: 5: /var/lib/dpkg/info/compiz.config: [gnome_session]: not found /var/lib/dpkg/info/compiz.config: 6: /var/lib/dpkg/info/compiz.config: backend: not found /var/lib/dpkg/info/compiz.config: 7: /var/lib/dpkg/info/compiz.config: integration: not found /var/lib/dpkg/info/compiz.config: 8: /var/lib/dpkg/info/compiz.config: plugin_list_autosort: not found /var/lib/dpkg/info/compiz.config: 9: /var/lib/dpkg/info/compiz.config: profile: not found /var/lib/dpkg/info/compiz.config: 11: /var/lib/dpkg/info/compiz.config: [general_ubuntu]: not found /var/lib/dpkg/info/compiz.config: 12: /var/lib/dpkg/info/compiz.config: backend: not found /var/lib/dpkg/info/compiz.config: 13: /var/lib/dpkg/info/compiz.config: integration: not found /var/lib/dpkg/info/compiz.config: 14: /var/lib/dpkg/info/compiz.config: plugin_list_autosort: not found /var/lib/dpkg/info/compiz.config: 15: /var/lib/dpkg/info/compiz.config: profile: not found

    Read the article

  • What is Quantum Computing? Microsoft’s video explains it in simple language

    - by Gopinath
    Quantum Computing is the next promising big thing to happen in computer science and its going to revolutionize the way we solve problem using computers. To explain the concepts of Quantum Computing to common man, Microsoft released a nice video which gives brief introduction to the concepts, explains the benefits and the work being carried out by Microsoft to make this technology research a reality. Check out this embedded video and visit Microsoft’s website for more details on Quantum Computing.

    Read the article

  • Which adjustable ergonomic keyboard do you recommend to a fellow coder and why?

    - by thefonso
    My beloved Goldtouch has died (a moment of silence)....the hinge at the middle which allows you to adjust the board finally broke and the manufacturer does not do repairs for free. I'd have to buy a new board. So...since this I'm in the market for a new keyboard and I'm looking for an adjustable one comparable or better to the Goldentouch. I post this question to all you coders out there. Which adjustable ergo keyboard do you recommend to a fellow coder and why?

    Read the article

  • What's the recommended way to configure a Synaptics touchpad device?

    - by htorque
    I want to increase the scroll area by moving the so-called RightEdge a bit towards the middle. Right now I'm doing this via a one-liner that's called at session start (added via gnome-session-properties): xinput --set-prop --type=int --format=32 11 252 1781 5125 1646 4582 This works fine, but feels like a hack. What's the recommended way to edit/set touchpad device properties like this one? Few years ago I'd have put that into the xorg.conf, but this seems to be discouraged nowadays.

    Read the article

  • Which adjustable ergo keyboard do you recommend to a fellow coder and why?

    - by thefonso
    My beloved Goldtouch has died (a moment of silence)....the hinge at the middle which allows you to adjust the board finally broke and the manufacturer does not do repairs for free. I'd have to buy a new board. So...since this I'm in the market for a new keyboard and I'm looking for an adjustable one comparable or better to the Goldentouch. I post this question to all you coders out there. Which adjustable ergo keyboard do you recommend to a fellow coder and why?

    Read the article

  • XMPP— openfire,PHP and python web service

    - by mlakhara
    I am planning to integrate real time notifications into a web application that I am currently working on. I have decided to go with XMPP for this and selected openfire server which i thought to be suitable for my needs. The front end uses strophe library to fetch the notifications using BOSH from my openfire server. However the notices are the notifications and other messages are to be posted by my application and hence I think this code needs to reside at the backend. Initially I thougt of going with PHP XMPP libraries like XMPHP and JAXL but then I think that this would cause much overhead as each script will have to do same steps like connection, authentication etc. and I think this would make the PHP end a little slow and unresponsive. Now I am thinking of creating a middle-ware application acting as a web service that the PHP will call and this application will handle the stuff with XMPP service. The benefit with this is that this app(a server if you will) will have to connect just once and the it will sit there listening on a port. also I am planning to build it in a asynchronous way such that It will first take all the requests from my PHp app and then when there are no more requests; go about doing the notification publishing stuff. I am planninng to create this service in Python using SleekXMPP. This is just what I planned. I am new to XMPP and this whole web service stuff ans would like to take your comments on this regarding issues like memory and CPU usage, advantages, disadvantages, scalability issues,security etc. Thanks in advance. PS:-- also if something like this already exists(although I didn't find after a lot of Googling) Please direct me there. EDIT --- The middle-level service should be doing the following(but not limited to): 1. Publishing notifications for different level of groups and community pages. 2. Notification for single user on some event. 3. User registration(can be done using user service plugin though). EDIT --- Also it should like to create pub-sub nodes and subscribe and unsubscribe users from these pub-sub nodes. Also I want to store the notifications and messages in a database(openfire doesn't). Would that be a good choice?

    Read the article

  • Vermeidung von SOA Anti-Patterns mittels AIA

    - by Hans Viehmann
    Gerade ist mir ein White Paper des Enterprise Architecture Teams in die Hände gefallen, das sich mit SOA Anti-Patterns befasst. Es ist zwar kein AIA Paper im eigentlichen Sinne, aber mit AIA hat man natürlich eine gute Unterstützung darin, die dort beschriebenen Fehler zu vermeiden. Das White Paper behandelt Themen wie: Vermeidung von SOA Silos SOA Reifegrad und Projekt-Management Ausuferndes Service Portfolio Umgang mit Referenz-Architekturen EAI 2.0 - Punkt-zu-Punkt Integration auf offenen Standards Ein Link auf das Dokument ist unten angefügt - viel Vergnügen bei der Lektüre ... Oracle White Paper: SOA Anti-Patterns.

    Read the article

  • SQL SERVER – 3 Online SQL Courses at Pluralsight and Free Learning Resources

    - by pinaldave
    Usain Bolt is an inspiration for all. He broke his own record multiple times because he wanted to do better! Read more about him on wikipedia. He is great and indeed fastest man on the planet. Usain Bolt – World’s Fastest Man “Can you teach me SQL Server Performance Tuning?” This is one of the most popular questions which I receive all the time. The answer is YES. I would love to do performance tuning training for anyone, anywhere.  It is my favorite thing to do, and it is my favorite thing to train others in.  If possible, I would love to do training 24 hours a day, 7 days a week, 365 days a year.  To me, it doesn’t feel like a job. Of course, as much as I would love to do performance tuning 24/7/365, obviously I am just one human being and can only be in one place t one time.  It is also very difficult to train more than one person at a time, and it is difficult to train two or more people at a time, especially when the two people are at different levels.  I am also limited by geography.  I live in India, and adjust to my own time zone.  Trying to teach a live course from India to someone whose time zone is 12 or more hours off of mine is very difficult.  If I am trying to teach at 2 am, I am sure I am not at my best! There was only one solution to scale – Online Trainings. I have built 3 different courses on SQL Server Performance Tuning with Pluralsight. Now I have no problem – I am 100% scalable and available 24/7 and 365. You can make me say the same things again and again till you find it right. I am in your mobile, PC as well as on XBOX. This is why I am such a big fan of online courses.  I have recorded many performance tuning classes and you can easily access them online, at your own time.  And don’t think that just because these aren’t live classes you won’t be able to get any feedback from me.  I encourage all my viewers to go ahead and ask me questions by e-mail, Twitter, Facebook, or whatever way you can get a hold of me. Here are details of three of my courses with Pluralsight. I suggest you go over the description of the course. As an author of the course, I have few FREE codes for watching the free courses. Please leave a comment with your valid email address, I will send a few of them to random winners. SQL Server Performance: Introduction to Query Tuning  SQL Server performance tuning is an art to master – for developers and DBAs alike. This course takes a systematic approach to planning, analyzing, debugging and troubleshooting common query-related performance problems. This includes an introduction to understanding execution plans inside SQL Server. In this almost four hour course we cover following important concepts. Introduction 10:22 Execution Plan Basics 45:59 Essential Indexing Techniques 20:19 Query Design for Performance 50:16 Performance Tuning Tools 01:15:14 Tips and Tricks 25:53 Checklist: Performance Tuning 07:13 The duration of each module is mentioned besides the name of the module. SQL Server Performance: Indexing Basics This course teaches you how to master the art of performance tuning SQL Server by better understanding indexes. In this almost two hour course we cover following important concepts. Introduction 02:03 Fundamentals of Indexing 22:21 Practical Indexing Implementation Techniques 37:25 Index Maintenance 16:33 Introduction to ColumnstoreIndex 08:06 Indexing Practical Performance Tips and Tricks 24:56 Checklist : Index and Performance 07:29 The duration of each module is mentioned besides the name of the module. SQL Server Questions and Answers This course is designed to help you better understand how to use SQL Server effectively. The course presents many of the common misconceptions about SQL Server, and then carefully debunks those misconceptions with clear explanations and short but compelling demos, showing you how SQL Server really works. In this almost 2 hours and 15 minutes course we cover following important concepts. Introduction 00:54 Retrieving IDENTITY value using @@IDENTITY 08:38 Concepts Related to Identity Values 04:15 Difference between WHERE and HAVING 05:52 Order in WHERE clause 07:29 Concepts Around Temporary Tables and Table Variables 09:03 Are stored procedures pre-compiled? 05:09 UNIQUE INDEX and NULLs problem 06:40 DELETE VS TRUNCATE 06:07 Locks and Duration of Transactions 15:11 Nested Transaction and Rollback 09:16 Understanding Date/Time Datatypes 07:40 Differences between VARCHAR and NVARCHAR datatypes 06:38 Precedence of DENY and GRANT security permissions 05:29 Identify Blocking Process 06:37 NULLS usage with Dynamic SQL 08:03 Appendix Tips and Tricks with Tools 20:44 The duration of each module is mentioned besides the name of the module. SQL in Sixty Seconds You will have to login and to get subscribed to the courses to view them. Here are my free video learning resources SQL in Sixty Seconds. These are 60 second video which I have built on various subjects related to SQL Server. Do let me know what you think about them? Here are three of my latest videos: Identify Most Resource Intensive Queries – SQL in Sixty Seconds #028 Copy Column Headers from Resultset – SQL in Sixty Seconds #027 Effect of Collation on Resultset – SQL in Sixty Seconds #026 You can watch and learn at your own pace.  Then you can easily ask me any questions you have.  E-mail is easiest, but for really tough questions I’m willing to talk on Skype, Gtalk, or even Facebook chat.  Please do watch and then talk with me, I am always available on the internet! Here is the video of the world’s fastest man.Usain St. Leo Bolt inspires us that we all do better than best. We can go the next level of our own record. We all can improve if we have a will and dedication.  Watch the video from 5:00 mark. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, SQLServer, T SQL, Technology, Video

    Read the article

  • Window focus confusion in unity

    - by Bryan Agee
    I like having focus prevention set to high, so that I don't have some stupid auto-launched app steal my typing in the middle of something else. Unfortunately, Unity keeps focus on the right window while raising the new one. A number of times, this has caused me to close an application by accident that had control of the menu bar, even though it was underneath the new window. Is there a way to prevent raise without focus?

    Read the article

  • Best Practices To Build a Product Registration System?

    - by Volomike
    What are some practices I should use in a product registration system I'm building? I likely can't stop all malicious hacking, but I'd like to slow them down a great deal. (Note, I know only PHP.) I'm talking about things like encrypting traffic, testing the encryption from hacking like a man-in-the-middle attack, etc. The other concern I have is that this needs to work on most PHP5-based web hosting environments, which may not have mcrypt installed.

    Read the article

  • Should you ever re-estimate user stories?

    - by f1dave
    My current project is having a 'discussion' which is split down the middle- "this story is more complex than we originally thought, we should re-estimate" vs "you should never re-estimate as you only ever estimate up and never down". Can anyone shed some light on whether you ever should re-estimate? IMHO I'd imagine you could bring up an entirely new card for a new requirement or story, but going back and re-estimating on backlog items seems to skew the concept of relative sizing and will only ever 'inflate' your backlog.

    Read the article

  • The Loneliest Road in America and the OTN Garage

    - by rickramsey
    Source I never told anyone how the image of the OTN Garage on Facebook came to be. I took the Facebook picture on Route 50 in Nevada, USA, in October of 2010. I was riding from Colorado to Oracle OpenWorld in San Francisco, so it was probably October. Route 50 is known as "The Loneliest Road in America." There are roads across Nevada that have even LESS traffic, but Route 50 still one. desolate. road. Although I have seen stranger things while riding along Nevada's Extraterrestrial Highway, I still run across notable oddities every time I ride Route 50. Like the old man with a bandolero of water bottles jogging along the side of the highway in the middle of the day, 50 miles from the closest town. First ultra-marathoner I'd seen in action. He waved at me. Or the dozen Corvettes with California license plates driving toward me, all doing the speed limit in the middle of nowhere because they were being tailed by half a dozen Nevada state troopers. #fail. I don't remember which town I was in, but I noticed the building when I stopped at the gas station. While standing there pouring fuel into the Harley, the store caught my eye. So I pulled the bike in front and walked inside. The owner is a little old lady, about 100 years old. Most of the goods she had on the shelves looked like they had been placed there during WWII. She was itty bitty and could barely see over the counter, but she was so happy when I bought a bar of Hershey's chocolate that she gave me a five cent discount. I took a few pictures and, when I got back, Kemer Thomson, who sometimes blogs here, photoshopped the OTN Garage and Oil Change signs onto it. The bike is a 2009 Road King Classic with a Bob Dron fairing and a Corbin heated seat. The seat came in handy when I rode home over Tioga Pass. The Road King is a very comfy touring bike with a great Harley rumble. I'm kinda sorry I sold it. When I stopped for fuel about 75 miles down the road at the next town, I peeled back the chocolate bar. I had turned into powder. Probably 50 years ago. - Rick Website Newsletter Facebook Twitter

    Read the article

  • Cannot install Acrobat Reader on Ubuntu 12.04.1

    - by user91137
    I have been trying to install Acrobat Reader on my Ubuntu 12.04.1. In the be;ggining, I tried to install it from the software-center, but it crashes with the report: (Reading database ... 189311 files and directories currently installed.) Unpacking acroread (from .../acroread_9.5.1-1precise1_i386.deb) ... dpkg: error processing /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb (--unpack): trying to overwrite '/usr/bin/acroread', which is also in package adobereader-ptb 8.1.7-2 No apport report written because MaxReports is reached already Processing triggers for desktop-file-utils ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for gnome-menus ... Processing triggers for man-db ... Errors were encountered while processing: /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb" As as solution, I tried to install it via terminal, with the $sudo apt-get install acroread and receive the following: arcanjo@arcanjo:~$ sudo apt-get install acroread Lendo listas de pacotes... Pronto Construindo árvore de dependências Lendo informação de estado... Pronto Pacotes sugeridos: libldap2 libgnome-speech7 Os NOVOS pacotes a seguir serão instalados: acroread 0 pacotes atualizados, 1 pacotes novos instalados, 0 a serem removidos e 0 não atualizados. É preciso baixar 60,1 MB de arquivos. Depois desta operação, 142 MB adicionais de espaço em disco serão usados. Obter:1 http://archive.canonical.com/ubuntu/ precise/partner acroread i386 9.5.1-1precise1 [60,1 MB] Baixados 60,1 MB em 4min 17s (234 kB/s) (Lendo banco de dados ... 189311 ficheiros e directórios actualmente instalados.) Desempacotando acroread (de .../acroread_9.5.1-1precise1_i386.deb) ... dpkg: erro processando /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb (--unpack): a tentar sobre-escrever '/usr/bin/acroread', que também está no pacote adobereader-ptb 8.1.7-2 Nenhum relatório apport escrito pois MaxReports já foi atingido Processando gatilhos para desktop-file-utils ... Processando gatilhos para bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processando gatilhos para gnome-menus ... Processando gatilhos para man-db ... Erros foram encontrados durante o processamento de: /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) arcanjo@arcanjo:~$ I've already tried to upgrade and update the apt-get, also tried to remove and re-install the software-center, tried deleting the "problematic" files and re-updating the apt-get... Nothing seems to work... Any solutions?

    Read the article

  • What is vt.handoff=7 parameter in grub.cfg

    - by sirkubax
    I wonder what vt.handoff=7 parameter does. I can not find any good man for that... BTW, if you have a nice descriptoon about : search --no-floppy --fs-uuid --set=root I would be happy :) grub.cfg example: menuentry 'FAILSAFE' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(hd0,msdos8)' search --no-floppy --fs-uuid --set=root 36286167-4eba-4a1e-a202-155c6baafa01 linux /boot/vmlinuz-2.6.37-12-generic root=UUID=36286167-4eba-4a1e-a202-155c6baafa01 ro vt.handoff=7 quiet splash initrd /boot/initrd.img-2.6.37-12-generic } BTW2 - i can not create tag vt.handoff ;(

    Read the article

  • Sprites are sometimes blurry in Flash

    - by Tim Cooper
    I am playing around with drawing an SVG sprite (imported in through [Embed]). Depending on the coordinates of the image, sometimes it appears more crisp than others. The following image shows how at different locations is it rendered differently: (Image link - You may have to download and zoom in with an image editor to see it) You'll notice that the middle sprite is more blurry than the ones on the sides. Does anyone know why this is? Any help would be appreciated.

    Read the article

  • SortedDictionary and SortedList

    - by Simon Cooper
    Apart from Dictionary<TKey, TValue>, there's two other dictionaries in the BCL - SortedDictionary<TKey, TValue> and SortedList<TKey, TValue>. On the face of it, these two classes do the same thing - provide an IDictionary<TKey, TValue> interface where the iterator returns the items sorted by the key. So what's the difference between them, and when should you use one rather than the other? (as in my previous post, I'll assume you have some basic algorithm & datastructure knowledge) SortedDictionary We'll first cover SortedDictionary. This is implemented as a special sort of binary tree called a red-black tree. Essentially, it's a binary tree that uses various constraints on how the nodes of the tree can be arranged to ensure the tree is always roughly balanced (for more gory algorithmical details, see the wikipedia link above). What I'm concerned about in this post is how the .NET SortedDictionary is actually implemented. In .NET 4, behind the scenes, the actual implementation of the tree is delegated to a SortedSet<KeyValuePair<TKey, TValue>>. One example tree might look like this: Each node in the above tree is stored as a separate SortedSet<T>.Node object (remember, in a SortedDictionary, T is instantiated to KeyValuePair<TKey, TValue>): class Node { public bool IsRed; public T Item; public SortedSet<T>.Node Left; public SortedSet<T>.Node Right; } The SortedSet only stores a reference to the root node; all the data in the tree is accessed by traversing the Left and Right node references until you reach the node you're looking for. Each individual node can be physically stored anywhere in memory; what's important is the relationship between the nodes. This is also why there is no constructor to SortedDictionary or SortedSet that takes an integer representing the capacity; there are no internal arrays that need to be created and resized. This may seen trivial, but it's an important distinction between SortedDictionary and SortedList that I'll cover later on. And that's pretty much it; it's a standard red-black tree. Plenty of webpages and datastructure books cover the algorithms behind the tree itself far better than I could. What's interesting is the comparions between SortedDictionary and SortedList, which I'll cover at the end. As a side point, SortedDictionary has existed in the BCL ever since .NET 2. That means that, all through .NET 2, 3, and 3.5, there has been a bona-fide sorted set class in the BCL (called TreeSet). However, it was internal, so it couldn't be used outside System.dll. Only in .NET 4 was this class exposed as SortedSet. SortedList Whereas SortedDictionary didn't use any backing arrays, SortedList does. It is implemented just as the name suggests; two arrays, one containing the keys, and one the values (I've just used random letters for the values): The items in the keys array are always guarenteed to be stored in sorted order, and the value corresponding to each key is stored in the same index as the key in the values array. In this example, the value for key item 5 is 'z', and for key item 8 is 'm'. Whenever an item is inserted or removed from the SortedList, a binary search is run on the keys array to find the correct index, then all the items in the arrays are shifted to accomodate the new or removed item. For example, if the key 3 was removed, a binary search would be run to find the array index the item was at, then everything above that index would be moved down by one: and then if the key/value pair {7, 'f'} was added, a binary search would be run on the keys to find the index to insert the new item, and everything above that index would be moved up to accomodate the new item: If another item was then added, both arrays would be resized (to a length of 10) before the new item was added to the arrays. As you can see, any insertions or removals in the middle of the list require a proportion of the array contents to be moved; an O(n) operation. However, if the insertion or removal is at the end of the array (ie the largest key), then it's only O(log n); the cost of the binary search to determine it does actually need to be added to the end (excluding the occasional O(n) cost of resizing the arrays to fit more items). As a side effect of using backing arrays, SortedList offers IList Keys and Values views that simply use the backing keys or values arrays, as well as various methods utilising the array index of stored items, which SortedDictionary does not (and cannot) offer. The Comparison So, when should you use one and not the other? Well, here's the important differences: Memory usage SortedDictionary and SortedList have got very different memory profiles. SortedDictionary... has a memory overhead of one object instance, a bool, and two references per item. On 64-bit systems, this adds up to ~40 bytes, not including the stored item and the reference to it from the Node object. stores the items in separate objects that can be spread all over the heap. This helps to keep memory fragmentation low, as the individual node objects can be allocated wherever there's a spare 60 bytes. In contrast, SortedList... has no additional overhead per item (only the reference to it in the array entries), however the backing arrays can be significantly larger than you need; every time the arrays are resized they double in size. That means that if you add 513 items to a SortedList, the backing arrays will each have a length of 1024. To conteract this, the TrimExcess method resizes the arrays back down to the actual size needed, or you can simply assign list.Capacity = list.Count. stores its items in a continuous block in memory. If the list stores thousands of items, this can cause significant problems with Large Object Heap memory fragmentation as the array resizes, which SortedDictionary doesn't have. Performance Operations on a SortedDictionary always have O(log n) performance, regardless of where in the collection you're adding or removing items. In contrast, SortedList has O(n) performance when you're altering the middle of the collection. If you're adding or removing from the end (ie the largest item), then performance is O(log n), same as SortedDictionary (in practice, it will likely be slightly faster, due to the array items all being in the same area in memory, also called locality of reference). So, when should you use one and not the other? As always with these sort of things, there are no hard-and-fast rules. But generally, if you: need to access items using their index within the collection are populating the dictionary all at once from sorted data aren't adding or removing keys once it's populated then use a SortedList. But if you: don't know how many items are going to be in the dictionary are populating the dictionary from random, unsorted data are adding & removing items randomly then use a SortedDictionary. The default (again, there's no definite rules on these sort of things!) should be to use SortedDictionary, unless there's a good reason to use SortedList, due to the bad performance of SortedList when altering the middle of the collection.

    Read the article

  • How can I estimate cost of creating tile-set similar to HoM&M 2?

    - by Alexey Petrushin
    How to estimate cost of creating tile-set similar to HoM&M 2? I'm mostly interested in the tile-set graphics only, no animation needed, the big images of town and creatures can be done as quick and dirty pensil sketches. The quality of tiles and its amount should be roughly the same as in HoM&M 2. Can You please give a rough estimate how much it will take man-hours and how much will it cost?

    Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >