Search Results

Search found 102655 results on 4107 pages for 'microsoft server 2008'.

Page 34/4107 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• Disabling DNS Registration on Server 2008 R2

  - by WaldenL

  I want to tell a server 2008 R2 machine to NOT register it's IP addresses in DNS. I go into the Advanced tab on IPv4 and turn off "Register this connection's addresses in DNS" simple! But... the addresses are updated in DNS anyway! And actually the A record is eventually removed from the DNS server. I've confirmed that the checkbox is off by looking at it myself, and by checking the RegistrationEnabled registry value for that adapter. Both confirm that the registration is off. I've turned of DNS debug logging on the DNS server and I can see DNS Update requests coming from the server in question! This should not happen. What's even odder is that eventually (several hours) the A record for the server (which I added by hand!) is removed from the DNS server. I've also confirmed that scavaging is off on both DNS servers in the domain. Ideas? Edits: Per the comment: The server has static IP addresses. However, it's got two of them on one adapter. Since I'm in a VM (HyperV) environment I just spun up a second adapter and moved the second IP to the second adapter. I set the first adapter to auto-register (since that's the IP I want anyway) and the second adapter to NOT auto-register. We'll see if this is any better. Not any better. On a reboot of the server the registration was removed from DNS. Seems both cards are still contacting the server. Based on the DNS log the card that shouldn't register in DNS is registering a 'delete' request. And then the card that should register is registering an add request but that's ignored. I'm totally confused at this point.

  Read the article

• How do i play nicely with MS SQL/SQL Server 2008

  - by acidzombie24

  Big problem. I have nearly given up. I am trying to port my prototype to use MS SQL so it will work on a server once i get it (the server will be SQL Server 2008, shared, i dont know any more info). So i tried to connect to SQL Server via visual studios IDE and had no luck. I enabled TCP and named pipes and restarted the service (and computer) with still no luck. I remembered about mdf files so i made that after an obstacle of not being able to make the connect string require i figure out visual studio has it in its properties and successfully connected with that. Then i had a problem with nested transactions. After not being able to figure out how to check i wondered if i can configure it to allow it somehow. I always thought all of MS were the same except for limitations but sql server seems to support nested transactions so theres no point trying to work around the problem with .mdf files since i wont need them and really just used it to port the base of my sql code and to check if syntax is correct. I tried installing SQL Server Management Studio since people mentioned it several times (as a solution or at least help). When installing it on windows 7 it says it may not be compatible. After running it, it launched SQL Server Installation Center (64-bit) which doesnt seem to be the same thing as i dont see a way to modify any of my server (networking) configurations or edit user permissions, etc. I am clueless what to do next. Does anyone have any ideas? I'm posting here bc i think my problem is more configurations and sql server then programming.

  Read the article

• Cannot access Network Shares on Windows Server 2008 running VisualSVN Server

  - by mwillmott

  Hi, I have installed VisualSVN server on Windows Server 2008. The server is part of a domain but not the domain controller, it is just a data server and now an SVN server. VisualSVN uses port 80 and can only be access from inside the network (i do i by going to the dns name of the server). However, ever since i have installed this, other computers on the network can no longer access the shared folders on the server EXCEPT the domain controller which has no problems accessing the shares. I am stumped, i am guessing it is something to do with Apache running and not using host-headers (or whatever the Apache equivalent may be) but just being bound to the servers DNS name or IP. Any suggestions?

  Read the article

• Windows 2008 server hosting in Europe

  - by Lasse P

  Hi, I'm searching for a Windows 2008 server in Europe, preferably in Germany or UK or anything with good routing to Denmark (as its where the primary traffic will be generated from). The server will be used as web server (asp.net mvc, php), mail server and database server. We are running a few sites with around 200 concurrent users, which isn't much, but we intend to expand in the near future and the server should be easy to scale in form of adding more RAM and HDD space - if its possible. I think a virtual server may be the best choice - hyper-v or virtuozzo? - considering cost vs specs - but i'm open to suggestions. The max budget is in the range of $1000-1200/year. You guys have any suggestions? Let me know if you need further info.

  Read the article

• Subdomains for different applications on Windows Server 2008 R2 with Apache and IIS 7 installed

  - by Yusuf

  I have a home server, on which I have installed Apache, and several other applications that have a Web GUI (JDownloader, Free Download Manager). In order to access each of these apps (whether be it from the local network or the Internet), I have to enter a different port, e.g., http://server:8085 or http://xxxx.dyndns.org:8085 for Apache http://server:90 or http://xxxx.dyndns.org:90 for FDM http://server:8081 or http://xxxx.dyndns.org:8081 for JDownloader I would like to be able to access them using sub-domains, e.g, http://apache.server or http://apache.xxxx.dyndns.org for Apache, http://fdm.server or http://fdm.xxxx.dyndns.org for FDM, http://jdownloader.server or http://jdownloader.xxxx.dyndns.org for JDownloader First of all, would it be possible like I want it, i.e., both from LAN and Internet, and if yes, how? Even if it's possible only for Internet, I would like to know how to do it, if there's a way.

  Read the article

• Using SSLv3 - Enabling Strong Ciphers Server 2008

  - by Igor K

  I've disabled SSLv2 and SSLv3 is on. However I cannot connect to a remote server which fails with The client and server cannot communicate, because they do not possess a common algorithm Ran an SSL check (http://www.serversniff.net/sslcheck.php) on the remote server and ours, and noticed none of the ciphers they accept we have on our server. How can this be configured? (Windows Web Server 2008) Remote Server Accepted SSL ciphers: DHE-RSA-AES256-SHA AES256-SHA EDH-RSA-DES-CBC3-SHA DES-CBC3-SHA DHE-RSA-AES128-SHA AES128-SHA Our server by default accepts: DES-CBC3-SHA RC4-SHA RC4-MD5

  Read the article

• Cannot access Network Shares on Windows Server 2008 running VisualSVN Server

  - by mwillmott

  I have installed VisualSVN server on Windows Server 2008. The server is part of a domain but not the domain controller, it is just a data server and now an SVN server. VisualSVN uses port 80 and can only be access from inside the network (i do i by going to the dns name of the server). However, ever since i have installed this, other computers on the network can no longer access the shared folders on the server EXCEPT the domain controller which has no problems accessing the shares. I am stumped, i am guessing it is something to do with Apache running and not using host-headers (or whatever the Apache equivalent may be) but just being bound to the servers DNS name or IP. Any suggestions?

  Read the article

• CentOS Vs Windows Server 2008

  - by Steve

  Hi, Apologies if the question appears ambiguous, I have little experience in this area and was after some informed opinions. I am deploying a test scenario of a server/client network and need to make some choices for Server. The client will be a Windows system as it meets the requirements for the client, the server choice has more room for selection. From my experience with Linux in general and the appealing nature of open source for low cost, security etc and the availability and performance of database and web server programs I have been considering CentOS as a server choice. I have the ability to make most of the choices of what software / server packages I wish to install. This includes Active Directory (something I have no experience with). How well does this operate with Windows clients? Am I being too selective and creating unnecessary complication by setting out not to use a Windows Server OS?

  Read the article

• Server 2008 Hyper-V User Accounts to access each other

  - by asn1981

  Hi, I have a windows server 2008 r2 with 3 hyper-v vm's IIS server Sql server 3 - Mail server I'm new to networking/server configuration. I have created a Virtual Network and can see each of the 3 VMs as well as the host on the network. I can connect from each VM to the host using the admin account. However, what would be the best (secure) way to create connections/accounts between the VMs, presumabely this shouldn't be done with an admin account but one with lesser priveledges. For example, to be able to access the SQL Server VM from the IIS server VM?

  Read the article

• Will this increase my Virtual private Server failing rate ?

  - by Spencer Lim

  Will this increase my Virtual private Server failing rate if i :- install Microsoft Window Server 2008 Enterprise install SQL server enterprise 2008 install IIS 7.5 install ASP.Net Mvc 2 install Microsoft Exchange << should live inside MWS2008 ? or standalone without OS? install Team foundation server << should live inside MWS2008 ? or standalone without OS? on one mini VPS with specification of DELL Poweredge R710 shared plan DDR3 ECC RAMs 16GB and -- 1GB for this VPS using DELL PERC 6i raid controller (this thing alone about 1.5k-2k) and the SAS HDD (15K RPM) (146GB) -- 33GB to this VPS each hdd is freaking fast over 300MB read / write possible with proper tuning the motherboard is a DELL and it has twin redundant PSU (870watt 85%eff) its running on Intel Xeon 5502 (Quad Core) x2 so about 8 physical proc (fairly share) is there any ruler to measure for this about one VPS can only install what what what service ? because of my resource is limited =.@ may i know if it is install in this way,maybe it seem like defeat the way of "VPS"... what will happen ? or any guideline on this issue (fully configuring the window server 2008 R2) ? Thx for reply

  Read the article

• SQLAuthority News – Microsoft SQL Server 2008 R2 – PowerPivot for Microsoft Excel 2010

  - by pinaldave

  Microsoft has really and truly created some buzz for PowerPivot. I have been asked to show the demo of Powerpivot in recent time even when I am doing relational database training. Attached is the few details where everyone can download PowerPivot and use the same. Microsoft SQL Server 2008 R2 – PowerPivot for Microsoft Excel 2010 – RTM Microsoft® PowerPivot for Microsoft® Excel 2010 provides ground-breaking technology, such as fast manipulation of large data sets (often millions of rows), streamlined integration of data, and the ability to effortlessly share your analysis through Microsoft® SharePoint 2010. Microsoft PowerPivot for Excel 2010 Samples Microsoft® PowerPivot for Microsoft® Excel 2010 provides ground-breaking technology, such as fast manipulation of large data sets (often millions of rows), streamlined integration of data, and the ability to effortlessly share your analysis through Microsoft® SharePoint 2010. Download examples of the types of reports you can create. Microsoft PowerPivot for Excel 2010 Data Analysis Expressions Sample version 1.0 Microsoft® PowerPivot for Microsoft® Excel 2010 provides ground-breaking technology, such as fast manipulation of large data sets (often millions of rows), streamlined integration of data, and the ability to effortlessly share your analysis through Microsoft® SharePoint 2010. Download this PowerPivot workbook to learn more about DAX calculations. Note: The brief description below the download link is taken from respective download page. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Configure POP3 Connector for SBS 2008 (Exchange 2007)

  - by MadBoy

  I have a client which has all his mail on server outside of his company. Right now his exchange server (on SBS 2008 is configured using POP3 connector but problem is mail gets deleted from server when downloaded by connector. Is there a way to make pop3 connector leave emails on server (external one) and download them as well for use within Exchange. Client wants to "feel" exchange before making the move totally so he would like to play with it for longer while without loosing mails he has on his server.

  Read the article

• Create mirror software raid with bad blocks hdd. How to check data integrity?

  - by rumburak

  There is error in System event log like this one: "The device, \Device\Harddisk1\DR1, has a bad block." Because of above I created Raid 1 on this disk and other one. I'm using Windows Server 2008 R2 software RAID volumes. Volume in Disk Manager is marked as "Failed Redundancy" and "At Risk". I could command to "Reactivate Disk" and it's starts to re-sync, but after a while it stops and returns to previous state. It stops re-sync on bad block on old disk and creates same error in System event log. Old disk status is Errors, new disk status is Online. How can I check that there is exact copy of the old disk on new one ? It is server machine so I would prefer to keep it running during this check.

  Read the article

• Defragment / Performance Monitor without Task Scheduler

  - by mjaggard

  My organisation has a policy of disabling Task Scheduler on all servers and workstations (don't ask, I tried once to wrestle the pig). I need to collect performance stats using Data Collector Sets in Windows 7 or Windows 2008 but the Performance Monitor interface requires Task Scheduler to be running. Is this possible because I'm not trying to schedule anything (except the collection of WMI information every 15 seconds but I doubt it hands that task off to the task scheduler)? Is there any way to trick it into thinking Task Scheduler is running? If not, is there any way to temporarily override the group policy to allow Task Scheduler to run? I've found that most group policy can be overridden in this way by an Administrator by editing the registry. On exactly the same vein, I want to defragment a hard disk on one of my workstations, but I can't get it to start because of the dependancy on Task Scheduler - is it possible to overcome this?

  Read the article

• PHP Connection Strings

  - by Campo

  I have setup mirroring on my MSSQL server it is an automatic fail over. Lets say the SQL server goes down. I have found connection strings to reconnect the site to the mirror database for MSSQL 2008 Data Source=myServerAddress;Failover Partner=myMirrorServerAddress;Initial Catalog=myDataBase;Integrated Security=True; OR Provider=SQLNCLI10;Data Source=myServerAddress;Failover Partner=myMirrorServerAddress;Initial Catalog=myDataBase;Integrated Security=True; OR Driver={SQL Server Native Client 10.0};Server=myServerAddress;Failover_Partner=myMirrorServerAddress;Database=myDataBase; Trusted_Connection=yes; Is there something similar I can use for PHP to do the same sort of thing. This way if only the database goes down the site instantly fails over to the mirror database as soon as it is online. Thoughts/Suggestions/Comments All appreciated. I checked connectionstring.com but did not find a section for PHP

  Read the article

• ADFS 2.0 Farm - How do I perform an immediate sync

  - by Matt

  Hi, We're using ADFS 2.0 on a windows 2008 server, it's in a farm and has the default polling interval of 5 minutes. We're making a change tonight and would rather sync immediately than wait for the other guy to update, especially as we might be making multiple changes. This Technet article mentions that I can change the polling interval or do an immediate sync between my servers: http://technet.microsoft.com/en-us/library/ee913581%28WS.10%29.aspx I checked the powershell commandlets for ADFS and I can only seem to find one that let's me set the polling interval, but not perform a 1 time immediate sync Searched the usual suspects, but just can't find a ADFS-SyncMyStuffNow command... Anyone?

  Read the article

• MWS2K8R2: Enabling Media Sharing using Streaming Media Services Role

  - by TheLizardKing

  So I have a Microsoft Windows Server 2008 R2 that stores a large collection of media (mostly mp3s) and I want to be able to deliver these files using a server/client setup with Windows Media Player being the client. I downloaded and installed Streaming Media Services Role. I even setup a publishing point with on-demand access. My issue is I can connect using WMP12 but it only connects as more of a stream and not a shared library. I can pause/play/skip as if it's a powerful radio station which is ok in my book but what I'd really like to do is allow me to control my music remotely, search and play for artists, maybe create playlists (not required but nice) and even connect it to an xbox. Is Streaming Media Services Role not what I should be using for this? Would installing WMP and sharing using that mechanism be a better option? Any Ideas?

  Read the article

• Shares on Hyper-V Host or Guest?

  - by Lazlow

  I'm about to deploy a Hyper-V Server, that will have 2 local drives: 250GB for VMs, 2TB for Shares. Does Hyper-V Server (standalone, not as a role) allow you to setup Network Shares? Or will I have to setup a VM with the 2TB drive allocated to it, for setting up the Shares? If Hyper-V supports Shares, would there be a performance benefit? The Shares will be used by both the VMs on the Hyper-V Server and other Servers within the Network.

  Read the article

• How to schedule daily backup in MSSQL Server 2008 Web Edition

  - by Xenon

  In MSSQL Management Studio I created a maintenance plan but it won't work Error is; "Message Executed as user: LITESPELL-19C34\Administrator. Microsoft (R) SQL Server Execute Package Utility Version 10.0.1600.22 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. The SQL Server Execute Package Utility requires Integration Services to be installed by one of these editions of SQL Server 2008: Standard, Enterprise, Developer, or Evaluation. To install Integration Services, run SQL Server Setup and select Integration Services. The package execution failed. The step failed." But in Microsoft page http://www.microsoft.com/sqlserver/2008/en/us/web.aspx in Automate tasks and policies section it is written that backup can be scheduled in this edition but how?

  Read the article

• Remote RAID Control in ESXi on a Dell PowerEdge 2950 Using OpenManage

  - by yoyomommy

  I was wondering how one can add a drive into an existing RAID array while ESXi is still running. I have read that you are able to use Dell OpenManage to do this. I have installed OMSA 7.0 on the VMWare ESXi host (5.0 and fully updated) and I've installed OpenManage Essentials on a Windows Server 2008 R2 guest. The issue that I'm having is that OpenManage is unable to see my RAID controller. I have seen videos and photos as parts of guides on how to do this online, so I would assume that the functionality exists and I just have it set up wrong.

  Read the article

• Hyper-v vs Virtualbox

  - by user53864

  I am using Oracle VirtualBox for ubuntu guest virtual servers on windows server 2008 R2. I'm in a plan to migrate(stop using virtualbox) from VirtualBox to Hyper-V. I guess many are using hyper-v virtualization and have good control over it and could help me here in clarifying few things. The reason I use Virtualbox is it's open source and the reason for migrating is that if hyper-v support any additional feature which virtualbox doesn't(and I couldn't migrate VBox vms along with all the snapshots). I have following questions to get it clarified. Does hyper-v require any licence or is limited to running particular number of virtual machines?. Is hyper-v capable to export/import VMs along with all the snapshots? Is it possible to run HeadLess VMs like it's done with VirtualBox? Does hyper-v recognize VDI/VMDK? Anybody can suggest me anything?. Thanks!

  Read the article

• SSRS Errors "Use Local", even though I am

  - by Corey Coogan

  I am at a loss. I posted this on SO, but think this is probably a better place. I have searched high and low and don't know what to do. I am running SQL Server Web Edition on Server 2008, which only supports local databases. I am trying to connect to localhost, but when I test my connection, I get this error. The feature: "The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services. The DB was upgraded from SQL Express and when I select @@version, it says it's Web Edition. I've tried rebooting and that seemed to fix it, but only for a little while.

  Read the article

• Visual Studio 2008: Can't connect to known good TFS 2010 beta 2

  - by p.campbell

  A freshly installed TFS 2010 Beta 2 is at http://serverX:8080/tfs. A Windows 7 developer machine with VS 2008 Pro SP1 and the VS2008 Team Explorer (no SP). The TFS 2008 Service Pack 1 didn't work for me - "None of the products that are addressed by this software update are installed on this computer." The developer machine is able to browse the TFS site at the above URL. The Issue is around trying to add the TFS server into the Team Explorer window in Visual Studio 2008. Here's a screenshot showing the error: unable to connect to this Team Foundation Server. Possible reasons for failure include: The Team Foundation Server name, port number or protocol is incorrect. The Team Foundation Server is offline. Password is expired or incorrect. The TFS server is up and running properly. Firewall ports are open, and is accessible via the browser on the dev machine!! larger image Question: how can you connect from VS 2008 Pro to a TFS 2010 Beta 2 server? Resolution Here's how I solved this problem: installed VS 2008 Team Explorer as above. re-install VS 2008 Service Pack 1 when adding a TFS server to Team Explorer, you MUST specify the URL as such: http://[tfsserver]:[port]/[vdir]/[projectCollection] in my case above, it was http://serverX:8080/tfs/AppDev-TestProject you cannot simply add the TFS server name and have VS look for all Project Collections on the server. TFS 2010 has a new URL (by default) and VS 2008 doesn't recognize how to gather that list.

  Read the article

• Having trouble using psservice and sc.exe between Windows Server 2008 machines

  - by Teflon Mac

  I'm trying to control services on one W2k8 machine from another; no domain just a workgroup. The user account I'm logged in as is an administrator on both machines. I've tried both psservice and sc.exe. These work in a Windows Server 2003 environment but it looks like I need to an extra step or two due to the changed security model in 2008. Any ideas as to how grant permission to the Service Control Manager (psservice) or OpenService (sc)? I tried running the DOS window with "Run As Administrator" and it made no difference. With psservice I get the following D:\mydir>psservice \\REMOTESERVER -u "adminid" -p "adminpassword" start "Display Name of Service" PsService v2.22 - Service information and configuration utility Copyright (C) 2001-2008 Mark Russinovich Sysinternals - www.sysinternals.com Unable to access Service Control Manager on \\REMOTESERVER: Access is denied. In the remote server, I get the following message in the Security Log so I know I connect and login to the remote machine. I assume it then fails on a subsequent authorization step. The logoff message in the security log is just that ("An account was logged off."), so no extra info there. Special privileges assigned to new logon. Subject: Security ID: REMOTESERVER\adminid Account Name: adminid Account Domain: REMOTESERVER Logon ID: 0xxxxxxxx Privileges: SeSecurityPrivilege SeBackupPrivilege SeRestorePrivilege SeTakeOwnershipPrivilege SeDebugPrivilege SeSystemEnvironmentPrivilege SeLoadDriverPrivilege SeImpersonatePrivilege sc.exe is similar. The command syntax and error differs as below but I also see the same login message in the remote server's security log. D:\mydir>sc \\REMOTESERVER start "Registry Name of Service" [SC] StartService: OpenService FAILED 5: Access is denied.

  Read the article

• Windows Server 2008 Stops Responding (Hyper-V Role Enabled)

  - by blackf0rk

  The machine is a brand new Dell Precision m6500, Core i5, 8GB RAM. Windows Server 2008 R2 (fully patched) with Hyper-V Role Enabled. Virtualization options in the BIOS are ON, SpeedStep is OFF, couldn't find C1E option in the BIOS to turn it off (I also got the impression that SpeedStep is C1E, but the Intel Product site lists them as separate "features." shrug) The server stops responding without any apparent reason. I've tried testing in multiple scenarios, all of which result in a crash at seemingly random times: With the Server sitting idle, no apps running. Server sitting idle with a Virtual Machine running. Using a BurnInTest application There's no blue screen. It doesn't restart. The screen just sits there. The keyboard backlight still responds and comes on with input, but nothing on the screen changes. There are no errors in the error log. I have to hold down the power button to turn it off. Doing memory tests on bootup results in no errors with the memory. I have a second identical system and the same thing happens there too. I've dual-booted into Windows 7 Profession x64 on this system with no problems. Further testing has shown that the issue is definitely related to Windows Server 2008 R2 and Hyper-V as it appears the crashing does not happen when the services are not running. I've installed all hotfixes relating to this issue (that I could find): 975530, 979444, 979491, 976427 System is still crashing without response.

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >