Search Results

Search found 47660 results on 1907 pages for 'name resolution'.

Page 34/1907 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • Two 12.04 machines have the same display settings but different results

    - by durron597
    I have one machine that has a relatively fresh install of 12.04 and one that I inherited. The terminal window in the inherited machine has a really weird font, and the regular one is what I would expect. Especially the behavior of the "m" character is messed up. Note: both of these machines are on the same KVM switch. Here is what I've tried: MyUnity on both machines seem the same .bashrc on both machines seem similar in all the ways that would matter for this issue The terminal profiles on both machines are the default Here are the xrandr outputs: Good xrandr: Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 4096 x 4096 VGA1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0 + 76.0 75.0* 72.0 70.0 1152x864 75.0 1024x768 75.1 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 640x480 72.8 75.0 66.7 60.0 720x400 70.1 Bad xrandr: Screen 0: minimum 8 x 8, current 1280 x 1024, maximum 8192 x 8192 DP-0 disconnected (normal left inverted right x axis y axis) DP-1 disconnected (normal left inverted right x axis y axis) DP-2 disconnected (normal left inverted right x axis y axis) DP-3 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0*+ 76.0 75.0 72.0 70.0 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 640x480 75.0 72.8 59.9 Finally here are screenshots of both machines, it seems to really only be Terminal, I have askubuntu behind the terminal window for comparison: Good screenshot: Bad Screenshot: Any thoughts as to what this might be?

    Read the article

  • Ubuntu Desktop shifted to right

    - by Sunny Kumar Aditya
    I am using Ubuntu 12.04 (precise) Kernel : 3.5.0-18-generic I am encountering a strange problem, my whole desktop has shifted to right. This happened after I restored my system, I was getting a blank screen earlier.(something is better than nothing). For some reason it also shows my display as laptop. Running xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0* 800x600 0.0 640x480 0.0 Running lspci lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0102] (rev 09) My Display on window supports maximum of 1366*768. I do not want to reinstall everything please help. It is cycled around as mentioned by Eliah Kagan For correcting my blank screen issue I edited my grub file I edited this line and added nomodeset, without it screen gets all grained up. GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset " When I boot from live CD also I get the same shifted screen Update 2 Tried booting from live CD with 11.04 same issue Update 3 .xsession-errors file : http://pastebin.com/uveSgNa8 Update 4 xrandr -q | grep -w connected xrandr: Failed to get size of gamma for output default default connected 1024x768+0+0 0mm x 0mm

    Read the article

  • Chuck Norris Be Thy Name

    - by Robz / Fervent Coder
    Chuck Norris doesn’t program with a keyboard. He stares the computer down until it does what he wants. All things need a name. We’ve tossed around a bunch of names for the framework of tools we’ve been working on, but one we kept coming back to was Chuck Norris. Why did we choose Chuck Norris? Well Chuck Norris sort of chose us. Everything we talked about, the name kept drawing us closer to it. We couldn’t escape Chuck Norris, no matter how hard we tried. So we gave in. Chuck Norris can divide by zero. What is the Chuck Norris Framework? @drusellers and I have been working on a variety of tools: WarmuP - http://github.com/chucknorris/warmup (Template your entire project/solution and create projects ready to code - From Zero to a Solution with everything in seconds. Your templates, your choices.) UppercuT - http://projectuppercut.org (Build with Conventions - Professional Builds in Moments, Not Days!) | Code also at http://github.com/chucknorris/uppercut DropkicK - http://github.com/chucknorris/dropkick (Deploy Fluently) RoundhousE - http://projectroundhouse.org (Professional Database Management with Versioning) | Code also at http://github.com/chucknorris/roundhouse SidePOP - http://sidepop.googlecode.com (Does your application need to check email?) HeadlocK - http://github.com/chucknorris/headlock (Hash a directory so you can later know if anything has changed) Others – still in concept or vaporware People ask why we choose such violent names for each tool of our framework? At first it was about whipping your code into shape, but after awhile the naming became, “How can we relate this to Chuck Norris?” People also ask why we uppercase the last letter of each name. Well, that’s more about making you ask questions…but there are a few reasons for it. Project managers never ask Chuck Norris for estimations…ever. The class object inherits from Chuck Norris Chuck Norris doesn’t need garbage collection because he doesn’t call .Dispose(), he calls .DropKick() So what are you waiting for? Join the Google group today, download and play with the tools. And lastly, welcome to Chuck Norris. Or should I say Chuck Norris welcomes you…

    Read the article

  • Byte Size Tips: How to Change Your Computer Name on Mac OS X

    - by The Geek
    When you’re sharing stuff back and forth between your computers, the names of those computers actually start to matter — in my case, I upgraded to a new MacBook Air because my old one has a dead screen and is out of warranty, so I made it into a desktop with an external monitor. That’s when I got an error that my two Macs had the same name. Oops! Luckily it’s an extremely easy fix. Just open up System Preferences, go to Sharing, and change the computer name. Done! You can also change it from the Terminal using this command, though obviously it’s much simpler to just change it under Sharing.     

    Read the article

  • Collision Detection Game Design and Architecture

    - by Chompas
    I've reading some articles about collision detection. My question here is about ideas on the design for it. Baically I have a C++ game that has a main loop with entities with an update method. Based on keyboard input, these characters updates their positions. My question is not about how to detect collisions, it's about getting ideas in which is the best way to implement this. The game has a main character but also enemies that have to collide between them, so I'm not sure where to make all the iterations for checking collisions and if the right way is to check everything against everything. Thanks in advance.

    Read the article

  • 2D OBB collision detection, resolving collisions?

    - by Milo
    I currently use OBBs and I have a vehicle that is a rigid body and some buildings. Here is my update() private void update() { camera.setPosition((vehicle.getPosition().x * camera.getScale()) - ((getWidth() ) / 2.0f), (vehicle.getPosition().y * camera.getScale()) - ((getHeight() ) / 2.0f)); //camera.move(input.getAnalogStick().getStickValueX() * 15.0f, input.getAnalogStick().getStickValueY() * 15.0f); if(input.isPressed(ControlButton.BUTTON_GAS)) { vehicle.setThrottle(1.0f, false); } if(input.isPressed(ControlButton.BUTTON_BRAKE)) { vehicle.setBrakes(1.0f); } vehicle.setSteering(input.getAnalogStick().getStickValueX()); vehicle.update(16.6666f / 1000.0f); ArrayList<Building> buildings = city.getBuildings(); for(Building b : buildings) { if(vehicle.getRect().overlaps(b.getRect())) { vehicle.update(-17.0f / 1000.0f); break; } } } The collision detection works well. What doesn't is how they are dealt with. My goal is simple. If the vehicle hits a building, it should stop, and never go into the building. When I apply negative torque to reverse the car should not feel buggy and move away from the building. I don't want this to look buggy. This is my rigid body class: class RigidBody extends Entity { //linear private Vector2D velocity = new Vector2D(); private Vector2D forces = new Vector2D(); private float mass; //angular private float angularVelocity; private float torque; private float inertia; //graphical private Vector2D halfSize = new Vector2D(); private Bitmap image; public RigidBody() { //set these defaults so we don't get divide by zeros mass = 1.0f; inertia = 1.0f; } //intialize out parameters public void initialize(Vector2D halfSize, float mass, Bitmap bitmap) { //store physical parameters this.halfSize = halfSize; this.mass = mass; image = bitmap; inertia = (1.0f / 20.0f) * (halfSize.x * halfSize.x) * (halfSize.y * halfSize.y) * mass; RectF rect = new RectF(); float scalar = 10.0f; rect.left = (int)-halfSize.x * scalar; rect.top = (int)-halfSize.y * scalar; rect.right = rect.left + (int)(halfSize.x * 2.0f * scalar); rect.bottom = rect.top + (int)(halfSize.y * 2.0f * scalar); setRect(rect); } public void setLocation(Vector2D position, float angle) { getRect().set(position, getWidth(), getHeight(), angle); } public Vector2D getPosition() { return getRect().getCenter(); } @Override public void update(float timeStep) { //integrate physics //linear Vector2D acceleration = Vector2D.scalarDivide(forces, mass); velocity = Vector2D.add(velocity, Vector2D.scalarMultiply(acceleration, timeStep)); Vector2D c = getRect().getCenter(); c = Vector2D.add(getRect().getCenter(), Vector2D.scalarMultiply(velocity , timeStep)); setCenter(c.x, c.y); forces = new Vector2D(0,0); //clear forces //angular float angAcc = torque / inertia; angularVelocity += angAcc * timeStep; setAngle(getAngle() + angularVelocity * timeStep); torque = 0; //clear torque } //take a relative Vector2D and make it a world Vector2D public Vector2D relativeToWorld(Vector2D relative) { Matrix mat = new Matrix(); float[] Vector2Ds = new float[2]; Vector2Ds[0] = relative.x; Vector2Ds[1] = relative.y; mat.postRotate(JMath.radToDeg(getAngle())); mat.mapVectors(Vector2Ds); return new Vector2D(Vector2Ds[0], Vector2Ds[1]); } //take a world Vector2D and make it a relative Vector2D public Vector2D worldToRelative(Vector2D world) { Matrix mat = new Matrix(); float[] Vectors = new float[2]; Vectors[0] = world.x; Vectors[1] = world.y; mat.postRotate(JMath.radToDeg(-getAngle())); mat.mapVectors(Vectors); return new Vector2D(Vectors[0], Vectors[1]); } //velocity of a point on body public Vector2D pointVelocity(Vector2D worldOffset) { Vector2D tangent = new Vector2D(-worldOffset.y, worldOffset.x); return Vector2D.add( Vector2D.scalarMultiply(tangent, angularVelocity) , velocity); } public void applyForce(Vector2D worldForce, Vector2D worldOffset) { //add linear force forces = Vector2D.add(forces ,worldForce); //add associated torque torque += Vector2D.cross(worldOffset, worldForce); } @Override public void draw( GraphicsContext c) { c.drawRotatedScaledBitmap(image, getPosition().x, getPosition().y, getWidth(), getHeight(), getAngle()); } } Essentially, when any rigid body hits a building it should exhibit the same behavior. How is collision solving usually done? Thanks

    Read the article

  • Only 1080p youtube videos work properly

    - by oshirowanen
    I have Ubuntu 12.04 64bit installed/full updated and have noticed that I can only play 1080p youtube videos properly on full screen. All other resolutions, 480, 720, 1440 etc do not go into full screen properly. Please have a look at the attached images. You will notice that only the 1080p video has the video control bar right at the bottom with a respectable text size. All other videos don't have the video control bar right at the bottom on the screen, and the control bar text is too small. I've had this problem for ages, but finally decided to ask about it. 480p: Notice the bottom control bar, it's not at the bottom on the screen and the video has borders on the sides: 720p: Notice the bottom control bar, it's not at the bottom on the screen and the video has borders on the sides and the text is tiny: 1080p: This is the only one that works as expected, i.e. controls right at the bottom, and good font size and no borders on the sides: 1440p: Notice the bottom control bar, it's not at the bottom on the screen and the video has borders on the sides: How do I correct this problem so I can play all different video resolutions at full screen. The flash version I have installed in Chromium is Adobe Flash Player - Version: 11.2 r202 - Shockwave Flash 11.2 r202

    Read the article

  • AABB > AABB collision response?

    - by Levi
    I'm really confused about how to fix this in 3d? I want it so that I can slide along cubes but without getting caught if there's 2 adjacent cubes. I've gotten it so that I can do x collision, with sliding, and y, and z, but I can't do them together, probably because I don't know how to resolve it correctly. e.g. [] [] []^ []O [] O is the player, ^ is the direction the player is moving, with the methods which I was trying I would get stuck between the cubes because the z axis was responding and kicking me out :/. I don't know how to resolve this in all 3 direction, like how would I go about telling which direction I have to resolve in. My previous methods involved me checking 4 points in a axis aligned square around the player, I was checking if these points where inside the cubes and if they where fixing my position, but I couldn't get it working correctly. Help is appreciated. edit: pretend all the blocks are touching.

    Read the article

  • Keeping Aspect Screen Ration While Stays in Center

    - by David Dimalanta
    I sqw and I tried this suggestion on PISTACHIO BRAINSTORMIN* on how to make a good and adaptive screen ration. For every different screen size, let's say I put the perfect circle as a Texture in LibGDX and played it on screen. Here's the blueberry image example and it's perfectly rounded: When I played it on the Google Nexus 7, the circle turn into a slightly oblonng shape, resembling as it was being flatten a bit. Please observe this snapshot below and you can see the blueberry is almost but slightly not perfectly rounded: Now, when I tried the suggested code for aspect ratio, the perfect circle retained but another problem is occured. The problem is that I expecting for a view on center but instead it's been moved to the right offset leaving with a half black screen. This would be look like this: Here is my code using the suggested screen aspect ratio code: Class' Field // Ingredients Needed for Screen Aspect Ratio private static final int VIRTUAL_WIDTH = 720; private static final int VIRTUAL_HEIGHT = 1280; private static final float ASPECT_RATIO = ((float) VIRTUAL_WIDTH)/((float) VIRTUAL_HEIGHT); private Camera Mother_Camera; private Rectangle Viewport; render() // Camera updating... Mother_Camera.update(); Mother_Camera.apply(Gdx.gl10); // Reseting viewport... Gdx.gl.glViewport((int) Viewport.x, (int) Viewport.y, (int) Viewport.width, (int) Viewport.height); // Clear previous frame. Gdx.gl.glClearColor(0, 0, 0, 1); Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT); show() Mother_Camera = new OrthographicCamera(VIRTUAL_WIDTH, VIRTUAL_HEIGHT); Was this code useful for screen aspect ratio-proportion fixing or it is statically dependent on actual device's width and height? *see http://blog.acamara.es/2012/02/05/keep-screen-aspect-ratio-with-different-resolutions-using-libgdx/#comment-317

    Read the article

  • How to reset display settings in XFCE \ Ubuntu 12.04 and also flgrx drivers

    - by Agent24
    I recently upgraded to Ubuntu 12.04 and since I hate unity I installed the Xubuntu package and am using XFCE instead. Since I have a Radeon HD5770 I also installed the fglrx drivers. This all went fine (aside from the fact that the post-release update fglrx drivers have an error on installation and Ubuntu thinks they're not installed when they actually are. I configured my display settings (dual monitors, a 17" CRT on VGA and a 17" LCD on DVI) in the amdcccle program and everything was perfect. THEN, 2 days ago, I accidentally clicked on the "Display" settings in XFCE "settings" manager. After that, everything got screwed. Now, I normally run the CRT at 1152x854 and the LCD at 1280x1024 with the CRT as my primary monitor (with panel) and the LCD without panels etc just to display other windows when I want to drag them over there. The problem is now that if I set my CRT to 1152x864, it stays at 1280x1024 virtually and half the stuff falls off the screen. It also puts the LCD at 1280x1024 BUT then overlays the CRT's display ontop with different wallpaper in an L shape down the right-hand and bottom edges. In short, nothing makes sense and everything is FUBAR. I tried uninstalling fglrx through synaptic, and renaming xorg.conf and also the xfce XML file that has monitor settings but it still won't make sense. Unity on the other hand can currently set everything normally so the problem appears to be only with XFCE. In any case, I can't even get the fglrx drivers back, when I re-installed them, I can't run amdccle anymore as it says the driver isn't installed!! Can someone help me reset my XFCE settings so the monitors aren't screwed with some incorrect virtual desktop size and also so I can get fglrx drivers back and working? I really don't want to have to format and reinstall and go through all the hassle but it looks like I may have to :(

    Read the article

  • Browser window size statistics?

    - by Litso
    Hey all, I was wondering, are there any statistics available on what size users have their browser set to nowadays? I know the screen resolutions (we have analytics, which shows those as well) but I doubt a lot of people with 1280*xxx and higher still browse full-screen though. My boss is determined to keep our website 900px wide though, because that way people with 1800*xxx resolutions can have two browser windows next to eachother without having to scroll horizontally. I have never seen anyone browse with two adjacent browser windows like that except here at my current job, so I'm kind of doubting whether this is the best decision or just his personal preference. Anyone that can help out here?

    Read the article

  • Error: type or namespace name 'AssemblyKeyFileAttribute' and 'AssemblyKeyFile' could not be found

    To associate an assembly with a strong key file to store it to GAC, we use should include following line after all the imports and before defing namespace. For VB.NET:  <Assembly: AssemblyKeyFile("c:\path\mykey.snk")> For C#:    [assembly: AssemblyKeyFile(@"c:\path\mykey.snk")] but, you might encounter following two errors at the time of creating Assembly for GAC. 1. The type or namespace name 'AssemblyKeyFileAttribute' could not be found (are you missing a using directive or an assembly reference?) 2. The type or namespace name 'AssemblyKeyFile' could not be found (are you missing a using directive or an assembly reference?) How to resolve these errors: Just include "System.Reflection" namespace. It resolve above two errors. span.fullpost {display:none;}

    Read the article

  • Keeping Aspect Screen Ratio While Stays in Center

    - by David Dimalanta
    I sqw and I tried this suggestion on PISTACHIO BRAINSTORMIN* on how to make a good and adaptive screen ration. For every different screen size, let's say I put the perfect circle as a Texture in LibGDX and played it on screen. Here's the blueberry image example and it's perfectly rounded: When I played it on the Google Nexus 7, the circle turn into a slightly oblonng shape, resembling as it was being flatten a bit. Please observe this snapshot below and you can see the blueberry is almost but slightly not perfectly rounded: Now, when I tried the suggested code for aspect ratio, the perfect circle retained but another problem is occured. The problem is that I expecting for a view on center but instead it's been moved to the right offset leaving with a half black screen. This would be look like this: Here is my code using the suggested screen aspect ratio code: Class' Field // Ingredients Needed for Screen Aspect Ratio private static final int VIRTUAL_WIDTH = 720; private static final int VIRTUAL_HEIGHT = 1280; private static final float ASPECT_RATIO = ((float) VIRTUAL_WIDTH)/((float) VIRTUAL_HEIGHT); private Camera Mother_Camera; private Rectangle Viewport; render() // Camera updating... Mother_Camera.update(); Mother_Camera.apply(Gdx.gl10); // Reseting viewport... Gdx.gl.glViewport((int) Viewport.x, (int) Viewport.y, (int) Viewport.width, (int) Viewport.height); // Clear previous frame. Gdx.gl.glClearColor(0, 0, 0, 1); Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT); show() Mother_Camera = new OrthographicCamera(VIRTUAL_WIDTH, VIRTUAL_HEIGHT); Was this code useful for screen aspect ratio-proportion fixing or it is statically dependent on actual device's width and height? *see http://blog.acamara.es/2012/02/05/keep-screen-aspect-ratio-with-different-resolutions-using-libgdx/#comment-317

    Read the article

  • Aptronyms: fitting the profession to the name

    - by Tony Davis
    Writing a recent piece on the pains of index fragmentation, I found myself wondering why, in SQL Server, you can’t set the equivalent of a fill factor, on a heap table. I scratched my head…who might know? Phil Factor, of course! I approached him with a due sense of optimism only to find that not only did he not know, he also didn’t seem to care much either. I skulked off thinking how this may be the final nail in the coffin of nominative determinism. I’ve always wondered if there was anything in it, though. If your surname is Plumb or Leeks, is there even a tiny, extra percentage chance that you’ll end up fitting bathrooms? Some examples are quite common. I’m sure we’ve all met teachers called English or French, or lawyers called Judge or Laws. I’ve also known a Doctor called Coffin, a Urologist called Waterfall, and a Dentist called Dentith. Two personal favorites are Wolfgang Wolf who ended up managing the German Soccer team, Wolfsburg, and Edmund Akenhead, a Crossword Editor for The Times newspaper. Having forgiven Phil his earlier offhandedness, I asked him for if he knew of any notable examples. He had met the famous Dr. Batty and Dr. Nutter, both Psychiatrists, knew undertakers called Death and Stiff, had read a book by Frederick Page-Turner, and suppressed a giggle at the idea of a feminist called Gurley-Brown. He even managed to better my Urologist example, citing the article on incontinence in the British Journal of Urology (vol.49, pp.173-176, 1977) by A. J. Splatt and D. Weedon. What, however, if you were keen to gently nudge your child down the path to a career in IT? What name would you choose? Subtlety probably doesn’t really work, although in a recent interview, Rodney Landrum did congratulate PowerShell MVP Max Trinidad on being named after a SQL function. Grant “The Memory” Fritchey (OK, I made up that nickname) doesn’t do badly either. Some surnames, seem to offer a natural head start, although I know of no members of the Page-Reid clan in the profession. There are certainly families with the Table surname, although sadly, Little Bobby Tables was merely a legend by xkcd. A member of the well-known Key family would need to name their son Primary, or maybe live abroad, to make their mark. Nominate your examples of people seemingly destined, by name, for their chosen profession (extra points for IT). The best three will receive a prize. Cheers, Tony.

    Read the article

  • Collision Detection, player correction

    - by DoomStone
    I am having some problems with collision detection, I have 2 types of objects excluding the player. Tiles and what I call MapObjects. The tiles are all 16x16, where the MapObjects can be any size, but in my case they are all 16x16. When my player runs along the mapobjects or tiles, it get verry jaggy. The player is unable to move right, and will get warped forward when moving left. I have found the problem, and that is my collision detection will move the player left/right if colliding the object from the side, and up/down if collision from up/down. Now imagine that my player is sitting on 2 tiles, at (10,12) and (11,12), and the player is mostly standing on the (11,12) tile. The collision detection will first run on then (10,12) tile, it calculates the collision depth, and finds that is is a collision from the side, and therefore move the object to the right. After, it will do the collision detection with (11,12) and it will move the character up. So the player will not fall down, but are unable to move right. And when moving left, the same problem will make the player warp forward. This problem have been bugging me for a few days now, and I just can't find a solution! Here is my code that does the collision detection. public void ApplyObjectCollision(IPhysicsObject obj, List<IComponent> mapObjects, TileMap map) { PhysicsVariables physicsVars = GetPhysicsVariables(); Rectangle bounds = ((IComponent)obj).GetBound(); int leftTile = (int)Math.Floor((float)bounds.Left / map.GetTileSize()); int rightTile = (int)Math.Ceiling(((float)bounds.Right / map.GetTileSize())) - 1; int topTile = (int)Math.Floor((float)bounds.Top / map.GetTileSize()); int bottomTile = (int)Math.Ceiling(((float)bounds.Bottom / map.GetTileSize())) - 1; // Reset flag to search for ground collision. obj.IsOnGround = false; // For each potentially colliding tile, for (int y = topTile; y <= bottomTile; ++y) { for (int x = leftTile; x <= rightTile; ++x) { IComponent tile = map.Get(x, y); if (tile != null) { bounds = HandelCollision(obj, tile, bounds, physicsVars); } } } // Handel collision for all Moving objects foreach (IComponent mo in mapObjects) { if (mo == obj) continue; if (mo.GetBound().Intersects(((IComponent)obj).GetBound())) { bounds = HandelCollision(obj, mo, bounds, physicsVars); } } } private Rectangle HandelCollision(IPhysicsObject obj, IComponent objb, Rectangle bounds, PhysicsVaraibales physicsVars) { // If this tile is collidable, SpriteCollision collision = ((IComponent)objb).GetCollisionType(); if (collision != SpriteCollision.Passable) { // Determine collision depth (with direction) and magnitude. Rectangle tileBounds = ((IComponent)objb).GetBound(); Vector2 depth = bounds.GetIntersectionDepth(tileBounds); if (depth != Vector2.Zero) { float absDepthX = Math.Abs(depth.X); float absDepthY = Math.Abs(depth.Y); // Resolve the collision along the shallow axis. if (absDepthY <= absDepthX || collision == SpriteCollision.Platform) { // If we crossed the top of a tile, we are on the ground. if (obj.PreviousBound.Bottom <= tileBounds.Top) obj.IsOnGround = true; // Ignore platforms, unless we are on the ground. if (collision == SpriteCollision.Impassable || obj.IsOnGround) { // Resolve the collision along the Y axis. ((IComponent)obj).Position = new Vector2(((IComponent)obj).Position.X, ((IComponent)obj).Position.Y + depth.Y); // If we hit something about us, remove all velosity upwards if (depth.Y > 0 && obj.IsJumping) { obj.Velocity = new Vector2(obj.Velocity.X, 0); obj.JumpTime = physicsVars.MaxJumpTime; } // Perform further collisions with the new bounds. return ((IComponent)obj).GetBound(); } } else if (collision == SpriteCollision.Impassable) // Ignore platforms. { // Resolve the collision along the X axis. ((IComponent)obj).Position = new Vector2(((IComponent)obj).Position.X + depth.X, ((IComponent)obj).Position.Y); // Perform further collisions with the new bounds. return ((IComponent)obj).GetBound(); } } } return bounds; } Update: I have uploaded the source code, if you want to look that through. I think that my general approach might be wrong when i am working with small tiles, I have also be unable to find any good information on physics and collision detection in Platform games. http://dl.dropbox.com/u/3181816/Sogaard.Games.SuperMario.rar

    Read the article

  • Meaning of offset in pygame Mask.overlap methods

    - by Alan
    I have a situation in which two rectangles collide, and I have to detect how much did they collide so so I can redraw the objects in a way that they are only touching each others edges. It's a situation in which a moving ball should hit a completely unmovable wall and instantly stop moving. Since the ball sometimes moves multiple pixels per screen refresh, it it possible that it enters the wall with more that half its surface when the collision is detected, in which case i want to shift it position back to the point where it only touches the edges of the wall. Here is the conceptual image it: I decided to implement this with masks, and thought that i could supply the masks of both objects (wall and ball) and get the surface (as a square) of their intersection. However, there is also the offset parameter which i don't understand. Here are the docs for the method: Mask.overlap Returns the point of intersection if the masks overlap with the given offset - or None if it does not overlap. Mask.overlap(othermask, offset) -> x,y The overlap tests uses the following offsets (which may be negative): +----+----------.. |A | yoffset | +-+----------.. +--|B |xoffset | | : :

    Read the article

  • DBMS agnostic - What to name the COUNT column from a SQL Query

    - by cyberkiwi
    I have trouble naming the COUNT() column from SQL queries and will swap between various variants _Count [Count] (sql, or "count" or backticks for MySQL etc) C Cnt CountSomething (where "something" is the field being counted, or "CountAll") NoOfRows RowCount etc Has anyone come up with any name that you are happy with and always use without hesitation? This is bothering me because after joining SO just recently, my answers have shown this tendency of flip-flopping with no consistency. I need to get this sorted. Please help. (While we're at it, what do you use for SUM etc?) Note: Before you close this question, consider that this one was not: What's the best name for a non-mutating “add” method on an immutable collection?

    Read the article

  • building a game for different resoulution phones

    - by Jason
    Hi, I am starting some tests for building a game on the android program. So far everything is working and seems nice. However I do not understand how to make sure my game looks correct on all phones as the all will have slightly different screen ratios (and even very different on some odd phones) What I am doing right now is making a view frustrum ( could also be ortho ) which I set to go from -ratio to +ratio ( as I have seen on many examples) however this causes my test shape to be stretched and sometimes cut off by the edge of the screen. I am tilting my phone to landscape to do my tests ( a bit extreame) but it should still render correctly if I have dome things right. Should I be scaling by some ratio before drawing or something? An example would be greatly apriciated PS I am doing a 2d game

    Read the article

  • SAT and then what?

    - by Marek
    I am on my way to make another Arkanoid game but this time I decided that I want it a little bit more realistic than just checking intersections between AABB and inverting one vector's component on collision. So I found SAT but I don't know how can I change direction of the ball in realistic matter. Maybe I'm wrong but it seems like knowing MTV doesn't give me much. So my question is what algorithms should I use to make it realistic? I also care about possibility of spinning ball with a pallet. I don't know how to do it exactly but I guess I will need to consider acceleration of the pallet.

    Read the article

  • Doubling the DPI with a shader?

    - by Mathias Lykkegaard Lorenzen
    I'm developing a game where the map is generated with Perlin Noise, but on the CPU. I am generating some perlin noise onto a texture with a small size, and then I stretch it out to the whole screen to simulate a map. The reason for the CPU generating the noise is that I want it to look the same on all devices. Now, here's the end-result. Please ignore the bullets and the explosion on the picture. What matters is the background (the black/gray pixels) and the ground (the brown-ish pixels). They are rendered to the same texture through perlin noise. However, this doesn't look very pretty. So I was wondering if it would be possible to double the amount of pixels using a shader, and rounding edges at the same time? In other words, improve the DPI. I'm using SharpDX with DirectX 11, through its toolkit feature. But any help that'll lead me in the right direction (for instance through HLSL) would be a great help. Thanks in advance.

    Read the article

  • Default User Id at Login different from User Name in Terminal Shell

    - by Bill
    During the Ubuntu 12.04 LTS installation, I was prompted to enter a user name and password, so that a corresponding account could be created and set up for login. I replaced the one that was provided by default (i.e. '70319', which is the Windows 7 admin id) with a user name/id of my choosing. Now, when I turn on the computer, and choose to enter the Ubuntu operating system, the login id that is displayed is 70319 - that is, the one provided by Windows 7. However, when I open up a Unix/Terminal shell, the user id that is displayed at the prompt is the one I entered during installation. Otherwise, the installation of Ubuntu was a success! Is there some way of changing the user id that is displayed at the Login screen, so that it is consistent with the one I entered during installation? If it's any help, I installed Ubuntu using wubi on an ASUS Eee PC 1011PX running Windows 7, and ASUS Express Gate Cloud. Further details regarding the setup/installation can be found at the following link: Installing Ubuntu on an Eee PC 1011PX

    Read the article

  • Typical collision detection

    - by marcg11
    I would like to know how is the typical collision detection of most games. For example, you control a character which can move in 2 dimensional directions (except up and down). Now lets asume he walks into a wall, most of the games depending on character angle and the BB normal face will only stop the player in one axis, but will continue moving in the other along the wall axis. How is that done? I've only managed to stop the character from going through the wall by seting the position to the last one in the past frame if the new position colllisions the bounding box. But this just makes the player stop sharply and unrealisticly.

    Read the article

  • Having to check collisions twice per game tic

    - by user22241
    I have vertically moving elevators (3 solid tiles wide) and static solid tiles. Each are separate entities and therefore have their own respective collision routines (to check for, and resolve, collisions with the main character) I check my vertical collisions after characters vertical movements and then horizontal collisions after horizontal movements. The problem is that I want my platform to kill the player if it squashes him from the top, and also if he's on a moving platform (that is moving up) that squashes him into a solid block. Correct behaviour, player on solid blocks being squashed from above by decending elevator Here is what happens. Gravity pushes character into solid block, solid block collision routine corrects characters position and sits him on the solid block which pushes him into the moving elevator, elevator routine then checks for collision and kills player. This assumes I am checking solid blocks first, then elevator collisions. However, if it's the other way around, this happens.... Incorrect behaviour, player on accending elevator gets pushed into solid blocks above Player is on an elevator moving up, gravity pushes him into the elevator, solid block CD routine detects no collision, no action taken. Elevator CD routine detects character has been pushed into elevator by gravity, corrects this by moving character up and sitting him on the elevator and pushes him into the solid blocks above, however the solid block vertical routine has now already run for this tic, so the game continues and the next solid block collision that is encountered is the horizontal routine. This detects a collision and moves the character out of the collision to the left or right of the block which looks odd to say the least (character should get killed here). The only way I've managed to get this working correctly is by running the solid block CD, then the elevator CD, then the solid block CD again straight after. This is clearly wasteful but I can't figure out how else to do this. Any help would be appreciated.

    Read the article

  • Google Closure Compiler - what does the name mean?

    - by mikez302
    I am curious about the Google Closure Compiler. Why did they name it that? Does it have anything to do with lexical closures? EDIT: I tried researching it in the FAQ and documentation, as well as doing Google searches such as "closure compiler name". I couldn't find anything definite, hence the reason I am asking. I don't think I will get a profoundly helpful answer but I was hoping that I could at least satisfy my curiosity. I am not trying to solve a specific problem. I am just curious.

    Read the article

  • Simulating smooth movement along a line after calculating a collision containing a restitution of zero in 2D

    - by Casey
    [for tl;dr see after listing] //...Code to determine shapes types involved in collision here... //...Rectangle-Line collision detected. if(_rbTest->GetCollisionShape()->Intersects(*_ground->GetCollisionShape())) { //Convert incoming shape to a line. a2de::Line l(*dynamic_cast<a2de::Line*>(_ground->GetCollisionShape())); //Get line's normal. a2de::Vector2D normal_vector(l.GetSlope().GetY(), -l.GetSlope().GetX()); a2de::Vector2D::Normalize(normal_vector); //Accumulate forces involved. a2de::Vector2D intermediate_forces; a2de::Vector2D normal_force = normal_vector * _rbTest->GetMass() * _world->GetGravityHandler()->GetGravityValue(); intermediate_forces += normal_force; //Calculate final velocity: See [1] double Ma = _rbTest->GetMass(); a2de::Vector2D Ua = _rbTest->GetVelocity(); double Mb = _ground->GetMass(); a2de::Vector2D Ub = _ground->GetVelocity(); double mCr = Mb * _ground->GetRestitution(); a2de::Vector2D collision_velocity( ((Ma * Ua) + (Mb * Ub) + ((mCr * Ub) - (mCr * Ua))) / (Ma + Mb)); //Calculate reflection vector: See [2] a2de::Vector2D reflect_velocity( -collision_velocity + 2 * (a2de::Vector2D::DotProduct(collision_velocity, normal_vector)) * normal_vector ); //Affect velocity to account for restitution of colliding bodies. reflect_velocity *= (_ground->GetRestitution() * _rbTest->GetRestitution()); _rbTest->SetVelocity(reflect_velocity); //THE ULTIMATE ISSUE STEMS FROM THE FOLLOWING LINE: //Move object away from collision one pixel to prevent constant collision. _rbTest->SetPosition(_rbTest->GetPosition() + normal_vector); _rbTest->ApplyImpulse(intermediate_forces); } Sources: (1) Wikipedia: Coefficient of Restitution: Speeds after impact (2) Wikipedia: Specular Reflection: Direction of reflection First, I have a system in place to account for friction (that is, a coefficient of friction) but is not used right now (in addition, it is zero, which should not affect the math anyway). I'll deal with that after I get this working. Anyway, when the restitution of either object involved in the collision is zero the object stops as required, but if movement along the same direction (again, irrespective of the friction value that isn't used) as the line is attempted the object moves as if slogging through knee deep snow. If I remove the line of code in question and the object is not push away one pixel the object barely moves at all. All because the object collides, is stopped, is pushed up, collides, is stopped...etc. OR collides, is stopped, collides, is stopped, etc... TL;DR How do I only account for a collision ONCE for restitution purposes (BONUS: but CONTINUALLY for frictional purposes, to be implemented later)

    Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >