Search Results

Search found 14989 results on 600 pages for 'street address'.

Page 34/600 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • Can ping IP address and nslookup hostname but cannot ping hostname

    - by Puddingfox
    I have a DNS server set up on one of my machines using BIND 9.7 Everything works fine with it. On my Windows 7 desktop, I have statically-assigned all network values. I have one DNS server set -- my DNS server. On my desktop, I can ping a third machine by IP fine. I can nslookup the hostname of the third machine fine. When I ping the hostname, it says it cannot find the host. / C:\Users\James>nslookup icecream Server: cake.my.domain Address: xxx.xxx.6.3 Name: icecream.my.domain Address: xxx.xxx.6.9 C:\Users\James>ping xxx.xxx.6.9 Pinging xxx.xxx.6.9 with 32 bytes of data: Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Ping statistics for xxx.xxx.6.9: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\Users\James>ping icecream Ping request could not find host icecream. Please check the name and try again. I have also specified the search domain as my.domain xxx.xxx and my.domain substituted for security Why can I not ping by hostname? I also can not ping using the FQDN. The problem is that this problem is shared by all applications that resolve hostnames. I cannot use PuTTY to SSH to my machines by hostname; only by IP

    Read the article

  • Office 365 - Outlook shows Global Address List clicking "Rooms" during a meeting request

    - by TheCleaner
    This appears to be a "known" issue, but apparently no fix for it. However, I've been impressed before at the tenacity of the experts here to figure out an answer/fix. ISSUE When booking a New Meeting in Outlook (2013 or 2010) and choosing the Rooms button: The default list that opens is the Offline Global Address List: Which means a user has to change from the Offline Global Address List to the All Rooms list as shown here in order to easily pick from the list of actual rooms/resources: This isn't the default however for On-Premise Exchange servers. They default "correctly" to the All Rooms list when you click the Rooms button in the meeting request. While the option of using the Room Finder is there and does work, users have to know to click the Room Finder choice and it doesn't fix the actual root issue here. MY RESEARCH A few links I've found: http://community.office365.com/en-us/forums/158/t/41013.aspx http://community.office365.com/en-us/forums/148/p/24139/113954.aspx http://community.office365.com/en-us/forums/172/t/58824.aspx It was suggested that it might be that the "msExchResourceAddressLists attribute has incorrect value set". I checked my config by running: Get-OrganizationConfig | Select-Object ResourceAddressLists and the output was what it should be: ResourceAddressLists -------------------- {\All Rooms} QUESTION Does anyone have a fix that will make the All Rooms list be the default list when clicking the Rooms button in Outlook when using Office 365 / Exchange Online?

    Read the article

  • Linux DHCPD Mac-Address based Groups

    - by GruffTech
    Our Current DHCPD.conf looks like the following. subnet 10.0.32.0 netmask 255.255.255.0 { range 10.0.32.100 10.0.32.254; option subnet-mask 255.255.255.0; option broadcast-address 10.0.32.255; option domain-name-servers 208.67.222.222,208.67.220.220; option routers 10.0.32.5; host Dev-ABaird-W { hardware ethernet 00:1D:09:3E:49:13; fixed-address 10.0.32.94; } ... more static hosts .... } About as basic as it gets. The old router is 10.0.32.1, our company wanted to implement a squid proxy to better monitor web traffic while at work, and if necessary block large time-wasters, IE Facebook.com. However, we've quickly realized that this change has played a mean prank on our Polycom SIP Phones. Occasionally our phones will not ring, the end recipient hears ringing (this is artificially created by our PBX) however the handset never rings. The ONLY thing that has changed in our network is the option routers line. So, Since all Polycom MAC addresses begin with 00:04:F2 would it be possible in DHCP to say any 00:04:F2:::* MAC addresses get option routers 10.0.32.1, and anything else must talk with our Gateway?

    Read the article

  • Get Internal IP Address From DHCP Hostname

    - by ell
    I would like to try and get an internal ip address of one of the computers on my network. The reason for this is I have a little home server box downstairs but every time I want to SSH into it I have to open my router configuration and go on the DHCP client table and look at the IP address. For example I would like to be able to go ssh ell-sever instead of ssh 192.168.1.105 or whatever it happens to be. My network configuration is like so: Router downstairs that is connected to the Internet and is running a DHCP server My server computer (ell-server) is a headless pc connected to the router via ethernet cable. Running Ubuntu 11.04 Server Edition My laptop upstairs (ell-laptop) that is running Ubuntu 11.10 Desktop Edition connected wirelessly Other (irrelevant) computers - 2 x Windows XP, 1 x Xubuntu - all connected with cables. (It seemed to me the method of connection isn't useful information but I put it in anyway - just in case. If I have missed any information please tell me) Do I have to run a DNS server on one of my computers? If so which one? And does that mean I will have to run a DDNS client on each computer? Thanks in advance, ell.

    Read the article

  • Mirroring the Global Address List on Blackberries

    - by Wyatt Barnett
    In times immemorial, back in the day when men were men and blackberries still took AA batteries, we rolled them out to our users for our 100 person operation. At that time, there was no such thing as address list lookups, so we were forced to hack a bit. The ingenious hack we came up with was to mirror the GAL as a public folder and then synch up blackberries to that. While there have been a few downsides here and there, they have been mere annoyances. And our users, having grown fat and prosperous in the intervening years, have been used to seeing every single employee and department here listed on their hand-held automatically. Alas, it appears that Outlook 2010 breaks this functionality as Blackberry desktop manager is completely incompatible with it. Moreover, this presents us with an opportunity to change things for the better given that public folders are going away next time we upgrade exchange. So, we are in search of a tool or technique that will allow us to mimic current functionality--that is to: Push an essentially arbitrary list of ~100 contacts to blackberry address books Said list shall be centrally updated Without requiring desktop manager or exchange public folders. Any suggestions, crowd?

    Read the article

  • How to test a HTTPS URL with a given IP address

    - by GreatFire
    Let's say a website is load-balanced between several servers. I want to run a command to test whether it's working, such as curl DOMAIN.TLD. So, to isolate each IP address, I specify the IP manually. But many websites may be hosted on the server, so I still provide a host header, like this: curl IP_ADDRESS -H 'Host: DOMAIN.TLD'. In my understanding, these two commands create the exact same HTTP request. The only difference is that in the latter one I take out the DNS lookup part from cURL and do this manually (please correct me if I'm wrong). All well so far. But now I want to do the same for an HTTPS url. Again, I could test it like this curl https://DOMAIN.TLD. But I want to specify the IP manually, so I run curl https://IP_ADDRESS -H 'Host: DOMAIN.TLD'. Now I get a cURL error: curl: (51) SSL: certificate subject name 'DOMAIN.TLD' does not match target host name 'IP_ADDRESS'. I can of course get around this by telling cURL not to care about the certificate (the "-k" option) but it's not ideal. Is there a way to isolate the IP address being connected to from the host being certified by SSL?

    Read the article

  • Can't access WordPress blog after host changed IP address of server

    - by John
    My host changed servers and all websites now have a new IP address. I have the same domain name and I assume the host runs the same nameservers, though my host and domain name provider are different. Notes: I never entered a Name or description under General/Settings for my blog. I left them both blank. That is when I could log into it. The wp-config file, has localhost entered rather than a specific IP. Again this has always been the case and my host never advised otherwise. I can get into cPanel by simply putting the newly advised IP in front of /Cpanel. However, I can not reach the admin panel of my WordPress blog (version 2.8.2). I had been loggin into it via http://xx.xx.xxx.xx/~example/blog/wp-login.php. My host suggested to simply insert the new IP in place of the old one. I still get the error message: 404 Not Found The server can not find the requested page: Apache/2.0.63 (Unix) mod_ssl/2.0.63 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 PHP/5.2.12 Server at 74.50.108.14 Port 80 I followed some tips on a question on Stack Overflow of a similar nature. I have logged into phpMyAdmin and found the wp-options table and searched for SELECT * FROM `wp_options` WHERE `option_name` IN ('siteurl', 'home') Only option ID 39 came up and the results are: Home has optionvalue http://example.org siteurl has optionvalue http://example.org/blog Both of which appear correct. Is there any part of the MySQL tables where I can change an actual IP address? Or is there something else you can advise?

    Read the article

  • Sending mail results in "Sender address rejected: Domain not found"

    - by user1281413
    The setup: WHM/CPanel CentOS 5 server running Exim and Courier for mail services, and BIND for domain name services. I recently moved servers. The old server was running a HIGHLY similar configuration, and all accounts were ported via WHM. However, the server is unable to send, and sometimes receive email. Errors I am seeing (when I do get an error mail back) state: 450 4.1.8 : Sender address rejected: Domain not found Edit for clarity: this is the error response from remote mail servers. Numerous independent mail servers come back with the same error. (Email address is merely one valid example) My first instinct of course was to check the domain records. However, k-t.org appears to have a valid record (including an MX record), even after running it through domain checks on a completely different server elsewhere and online. Note that the issue appears to happen with all the domains hosted on the server, not just k-t.org I have also ensured that a PTR was created. My Googling has only lead me to people who had fairly basic DNS mistakes, but either I'm blind/dumb (possible, DNS is not my strong suite), or it's something that is a bit more archaic. I've run out of ideas, and I can't seem to find anything that could explain why servers are unable to resolve the domains. There doesn't seem to be anything missing or incorrect.

    Read the article

  • Ubuntu server apt-get says "(-5 - No address associated with hostname)"

    - by Srini
    I have a ubuntu 12.04 server. Running sudo apt-get update on it produces errors like this: W: Failed to fetch http://au.archive.ubuntu.com/ubuntu/dists/precise-backports/main/binary-i386/Packages Something wicked happened resolving 'au.archive.ubuntu.com:http' (-5 - No address associated with hostname) I am able to ping all the other hosts on the network and also Google's DNS 8.8.8.8. But am unable to ping www.google.com. So, I'm guessing something is wrong with my DNS setup, but not sure what. I use static IP and my /etc/network/interfaces looks like this: auto eth0 iface eth0 inet static address 192.168.1.50 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.0.255 gateway 192.168.1.1 #dns-nameserver 203.12.160.35 203.12.160.36 #nameserver 203.12.160.35 203.12.160.36 My /etc/resolv.conf and /etc/resolvconf/resolv.conf.d/base are both empty and my /etc/resolvconf/resolv.conf.d/original says: nameserver 192.168.1.1 Any help would be greatly appreciated. P.S. I've googled it a bit and the common resolution is to switch to DHCP which I don't want to do since this is my home server. Thanks Srini

    Read the article

  • Find routers IP address on the other side

    - by corsiKa
    Here's the basic setup of my network In this diagram: 1: The internet c: cable 2: Wireless router w: wireless connection 3: A win7 box with internet connection sharing enabled 4: A wireless router, but I'm only using its LAN capabilities to connect box 5 to the internet. 5: A win7 box, the computer I'm using to make this post. So its internet works just fine. Now if I'm on box 5, and I ping 192.168.1.1, I hit 4. If I'm on box 3 and I ping 192.168.1.1, I hit 2. Now obviously box 3 does not think 4's IP address is 192.168.1.1, or I wouldn't be able to connect to the internet. Okay, now that you know as much as I do about my network, here's my question: If I was on box 3, how would I determine the IP address of 4? Basically I'm running a webserver on box 5 and want to access this webserver on box 3 and other boxes. So that's the end goal. If there's other information there that can help, I'd appreciate it. Thanks!

    Read the article

  • Exchange 2010: Send emails via STMP with custom From address to outside the domain

    - by marsze
    The requirement(s): (1) Connect to Exchange via STMP and (2) basic authentication and send emails with a (3) custom From address to (4) recipients outside the domain. I was able to get (1) - (3) working. I created a dedicated receive connector for this task and configured it like this: Permissions: ms-Exch-SMTP-Accept-Any-Recipient (for authenticated users) ms-Exch-SMTP-Accept-Authoritative-Domain-Sender (for authenticated users) ms-Exch-SMTP-Accept-Any-Sender (for authenticated users) Authentication: TLS Basic Authentication (without TLS) Exchange Server Authentication However, I'm still struggeling with (4): I can send with "fake" From addresses to recipients inside the domain. Also, I can send with the original From address to recipients outside the domain. Can you tell me what I'm missing, to configure Exchange to send emails with changed From addresses to recipients outside the domain? (Or is this even possible at all?) Thanks. UPDATE I have to correct myself: it seems to be working after all. There must be some issue with the mailbox I used for testing. It turned out it's working with other external mailboxes. However, I still have no idea what was different there... Anyways, you can take this as a documentation on how to configure Exchange in such a way ;)

    Read the article

  • Strange Domain name under the same IP Address

    - by Mike Chip
    There's something really weird happening in my server. But first things first: I wanted to have my website and chose the domain name "myowndomain.com", Now on my domain registrar I point "myowndomain.com" to the address of my recently setup VPS, let's say 50.50.50.50 So I installed everything I needed to run my website, and I started to notice strange queries coming from different IP Addresses. Like these [client 123.123.123.123] File does not exist: /var/www/html/api, referer: http://www.strangedomain.com/api/manyou/my.php [client 456.456.456.456] File does not exist: /var/www/html/api, referer: http://www.strangedomain.com/api/manyou/my.php or like this (Really a long line, I cut some things) GET /?s=vod-show-id-22-area-%E5%85%B6%E4%BB%96-language-%E9%9F%A9%E8%AF%AD.html HTTP/1.1" 301 295 "http://v.strangedomain.com/?s=vod-s ...[cut]... spider" That above is happening the most. The 'strangedomain.com' returns the same IP address of my VPS which my website is hosted on. The whois of such domain shows it's registered to a chinese. But the street name didn't look so right (like a huge single word), so I think all of that info might be fake, but still might be a chinese. I also noticed that all 'clients' trying to access the 'strangedomain.com' is coming from china. If I type in the browser 'strangedomain.com', I see my website. I'm worried, because my website is actually an e-commerce. I don't know if 'strangedomain.com' WAS a website on 50.50.50.50 in the not so far past, or if it's something else.

    Read the article

  • Is bonding mode=5 a solution against MAC flapping?

    - by Yuri
    There is two are interconnected Cisco WS-2950T. By the one GBIC port on first switch connected a first NIC of bonding interface, and by the one GBIC port on second switch connected a second NIC of bonding interface. Of course the both switches sees the bonding MAC-address only on one interface (eg it is GBIC on first switch) and all incoming traffic for bonding interface passes through this GBIC. But in "mode=5" all outgoing traffic are distributed between the all interfaces that make bond. In this case, the packets will be dropped from the second switch and anyway will going through the first switch? Or the division will be working?

    Read the article

  • VPN authentication and MAC addresses

    - by zakk
    I have to set up a VPN (various clients connecting to a web service on a server, which is also the VPN server) and I want to make sure that no user will share his/her credentials with third parties. I know that this problem is not solvable completely, but I'd want to set up some additional security checks... Some idea I have: 1) An additional check on MAC address, but... are MAC addresses preserved thru VPN? 2) Some kind of extra identification of the client (User Agent, open ports, I want to make sure that is the very same client I authorized). 3) I would like to avoid commercial solutions like a security token... I realize it would be the perfect solution, but it will be to expensive, I suppose... Do you feel that these options are viable? Do you have any other ideas? Thanks in advance for your replies!

    Read the article

  • google.com different IP in different countries. How?

    - by HeavyWave
    If you ping google.com from different countries you will get replies from local google servers. How does that work? Can a DNS record have multiple A addresses? Could someone point me to the technology they use to do that? Update. OK, so Google's DNS server gives out a different IP based on the location. But, as Alexandre Jasmin pointed out, how do they track the location? Surely their DNS won't ever see your IP address. Is the server querying Google's DNS guaranteed to be from the location it represents?

    Read the article

  • MAC and IP adress text-identicon as avatar

    - by rubo77
    I would like to create something like identicons but not with images but with a unique word for each IP-Adresses and MAC-Adresses. create an easy to remember alias for a mac address, that is unique and reverse lookupable, for example: IP 123.456.789.132 will result in an alias for that IP, that is connected to an existing word from a wordlist, that is unique. Background of this idea: this way we could identify our Routers in our Opennet in Hamburg easily in a graphical NodeGraph. Is there some site already, where I can convert MAC-Adresses to unique human readeable words?

    Read the article

  • Cloud services, Public IPs and SIP

    - by Guido N
    I'm trying to run a custom SIP software (which uses JAIN SIP 1.2) on a cloud box. What I'd really like is to have a real public IP aka which is listed by "ifconfig -a" command. This is because atm I don't want to write additional SIP code / add a SIP proxy in order to manage private IP addresses / address translation. I gave Amazon EC2 a go, but as reported here http://stackoverflow.com/questions/10013549/sip-and-ec2-elastic-ips it's not fit for purpose (they do a 1:1 NAT translation between the private IP of the box and its Elastic IP). Does anyone know of a cloud service that provides real static public IP addresses?

    Read the article

  • Get/Assign IP addresses assigned by the DHCP sever with DLink switches in between

    - by Ranjith Kumar
    In our office the setup is like we have a UBUNTU server with DHCP Server connected to all the PCS via 24 port and 8 port DLink switches. How can I find all the PCS(with client name, ip and mac address)in the network?? When I do "vi /var/lib/dhcp3/dhcpd.leases", I get all the ip addresses for the switches. I have used "arp-scan --interface=eth0 --localnet" to get all the IPs and MAC Addresses in my local network. I couldn't find any option to diplay client name. Also I would like to assign particular IP for a particular PC. I have done the changes in the dhcp.conf file but it is not working as they are not directly connected to DHCP-server(DLink switches in between). How can I assign IPs for PCs in this kind of setup. Thanks in advance

    Read the article

  • Error when trying to access Shared files from iMac via smb

    - by SatheeshJM
    I used to access all my Windows XP shared files on my Mac using Finder -- Window -- Connect to server. Now all of a sudden, an error crops up when I try to connect. I get the error "There was a problem connecting to the server "192.168.1.*" The server may not exist or it is unavailable at this time. Check the server name or IP address, check your internet connection and then try again. How can I remove this error and access my shared files from my Mac? P.S my network connections is fine.

    Read the article

  • Block a machine from accessing the internet

    - by Simon Rigby
    After some confirmation that I have thinking right in this scenario. We have a number of wired and wireless machines which presently have direct internet access. I also have a Linux (Ubuntu) server which is used as a file server for the network. Essentially I would like to be able to turn internet access on and off for machines. My plan is to block these machines by MAC address at the router. I would then set up a proxy server on the Linux box (ie Squid) so that the machines I wish to restrict can access the internet via the proxy. As I can adjust access via ACLs in squid, I would be able to switch on or off a machines access to the internet without having to further adjust the router's MAC rules. And of course I could go further and create a few scripts to assist with this admin task. Does this seem sound and have I over looked anything? Any help greatly appreciated. Simon.

    Read the article

  • bad switchs duplicate my ip

    - by tacoen
    I had a large area LAN. There were many switch and AP on it, then somehow I couldn't ping my servers, and it's said that the IP was duplicated. I use arpwatch and found out that one of the switch flip-flop-ing the IP. I isolated that troublesome switch using his mac-address. But, since this a large area LAN... I doubt this will be the last cases. If there any software or hardware that I can use to prevent this kind of error? Sorry for my bad English.

    Read the article

  • Adding localhost entry to Windows\System32\drivers\etc\hosts file with port number

    - by Kamyar
    I have set up a local site under IIS 7.5 under port 900. to access it I should type localhost:900 in the address bar. I'm a little bit familiar with the System32\Drivers\etc\hosts file and I know I can define my custom name with IP adderss there. For example I can add: 127.0.0.1 MyLocalSite and whenever I type in http://MyLocalSite in the browser, The DNS resolves its IP as 127.0.0.1. Is there anyway that I can specify port number in that file as well? (e.g. 127.0.0.1:900 MySecondSite and the DNS resolves it correctly) I tried 127.0.0.1:900 and 127.0.0.1::900 with no luck.

    Read the article

  • Server 2003 Filter mobile devices via MAC

    - by msindle
    At one of my client's sites I need to keep my users unauthorized devices off the wireless. They all know the SSID and Password because many of them have laptops that need the wireless. I'm running out of IP address's and we have sent out numerous emails asking them to stay off, but like most users they ignore IT's email. I'm currently running Server 2003 as the GC/DC (but have 2008 servers in place) and 2 Netgear WNAP320. I've seen several posts similar to what I'm looking for but they seem to deal with Linux. My question is how do I go about doing this without migrating (scheduled for the end of the year) to a new server and is it possible to do this within Server 2003? Thanks msindle

    Read the article

  • Why does pinging 192.168.072 (only 2 dots) return a response from 192.168.0.58?

    - by George Duckett
    I mistakenly missed the dot off of an IP address and typed in 192.168.072. To my surprise I connected to a machine at 192.168.0.58 If I ping 192.168.072 I get responses from 192.168.0.58. Why is this? I'm on a Windows PC on a Windows domain. If I ping 192.168.72 I get a response from 192.168.0.72, so it seems the 0 in 072 (in my original mistake) is significant. This question was a Super User Question of the Week. Read the blog entry for more details or contribute to the blog yourself

    Read the article

  • Error when trying to access Shared files from iMac [closed]

    - by SatheeshJM
    I used to access all my Windows XP shared files on my Mac using Finder -- Window -- Connect to server. Now all of a sudden, an error crops up when I try to connect. I get the error "There was a problem connecting to the server "192.168.1.*" The server may not exist or it is unavailable at this time. Check the server name or IP address, check your internet connection and then try again. How can I remove this error and access my shared files from my Mac? P.S my network connections is fine.

    Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >