Search Results

Search found 2976 results on 120 pages for 'timeout'.

Page 34/120 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • Cisco Pix how to add an additional block of static ip addresses for nat?

    - by Scott Szretter
    I have a pix 501 with 5 static ip addresses. My isp just gave me 5 more. I am trying to figure out how to add the new block and then how to nat/open at least one of them to an inside machine. So far, I named a new interface "intf2", ip range is 71.11.11.58 - 62 (gateway should 71.11.11.57) imgsvr is the machine I want to nat to one of the (71.11.11.59) new ip addresses. mail (.123) is an example of a machine that is mapped to the current existing 5 ip block (96.11.11.121 gate / 96.11.11.122-127) and working fine. Building configuration... : Saved : PIX Version 6.3(4) interface ethernet0 auto interface ethernet0 vlan1 logical interface ethernet1 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif vlan1 intf2 security1 enable password xxxxxxxxx encrypted passwd xxxxxxxxx encrypted hostname xxxxxxxPIX domain-name xxxxxxxxxxx no fixup protocol dns fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 no fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names ...snip... name 192.168.10.13 mail name 192.168.10.29 imgsvr object-group network vpn1 network-object mail 255.255.255.255 access-list outside_access_in permit tcp any host 96.11.11.124 eq www access-list outside_access_in permit tcp any host 96.11.11.124 eq https access-list outside_access_in permit tcp any host 96.11.11.124 eq 3389 access-list outside_access_in permit tcp any host 96.11.11.123 eq https access-list outside_access_in permit tcp any host 96.11.11.123 eq www access-list outside_access_in permit tcp any host 96.11.11.125 eq smtp access-list outside_access_in permit tcp any host 96.11.11.125 eq https access-list outside_access_in permit tcp any host 96.11.11.125 eq 10443 access-list outside_access_in permit tcp any host 96.11.11.126 eq smtp access-list outside_access_in permit tcp any host 96.11.11.126 eq https access-list outside_access_in permit tcp any host 96.11.11.126 eq 10443 access-list outside_access_in deny ip any any access-list inside_nat0_outbound permit ip 192.168.0.0 255.255.0.0 IPPool2 255.255.255.0 access-list inside_nat0_outbound permit ip 172.17.0.0 255.255.0.0 IPPool2 255.255.255.0 access-list inside_nat0_outbound permit ip 172.16.0.0 255.255.0.0 IPPool2 255.255.255.0 ...snip... access-list inside_access_in deny tcp any any eq smtp access-list inside_access_in permit ip any any pager lines 24 logging on logging buffered notifications mtu outside 1500 mtu inside 1500 ip address outside 96.11.11.122 255.255.255.248 ip address inside 192.168.10.15 255.255.255.0 ip address intf2 71.11.11.58 255.255.255.248 ip audit info action alarm ip audit attack action alarm pdm location exchange 255.255.255.255 inside pdm location mail 255.255.255.255 inside pdm location IPPool2 255.255.255.0 outside pdm location 96.11.11.122 255.255.255.255 inside pdm location 192.168.10.1 255.255.255.255 inside pdm location 192.168.10.6 255.255.255.255 inside pdm location mail-gate1 255.255.255.255 inside pdm location mail-gate2 255.255.255.255 inside pdm location imgsvr 255.255.255.255 inside pdm location 71.11.11.59 255.255.255.255 intf2 pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface global (outside) 2 96.11.11.123 global (intf2) 3 interface global (intf2) 4 71.11.11.59 nat (inside) 0 access-list inside_nat0_outbound nat (inside) 2 mail 255.255.255.255 0 0 nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp 96.11.11.123 smtp mail smtp netmask 255.255.255.255 0 0 static (inside,outside) tcp 96.11.11.123 https mail https netmask 255.255.255.255 0 0 static (inside,outside) tcp 96.11.11.123 www mail www netmask 255.255.255.255 0 0 static (inside,outside) 96.11.11.124 ts netmask 255.255.255.255 0 0 static (inside,outside) 96.11.11.126 mail-gate2 netmask 255.255.255.255 0 0 static (inside,outside) 96.11.11.125 mail-gate1 netmask 255.255.255.255 0 0 access-group outside_access_in in interface outside access-group inside_access_in in interface inside route outside 0.0.0.0 0.0.0.0 96.11.11.121 1 route intf2 0.0.0.0 0.0.0.0 71.11.11.57 2 timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute floodguard enable ...snip... : end [OK] Thanks!

    Read the article

  • Change the default SqlCommand CommandTimeout with configuration rather than recompile?

    - by robertc
    I am supporting an ASP.Net 3.5 web application and users are experiencing a timeout error after 30 seconds when trying to run a report. Looking around the web it seems it's easy enough to change the timeout in the code, unfortunately I'm not able to access the code and recompile. Is there anyway to configure the default for either the web app, the worker process, IIS or the whole machine? Here is the stack trace up to the point where it's in System.Data in case I'm missing some other problem: [SqlException (0x80131904): Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +1948826 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +4844747 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +194 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +2392 System.Data.SqlClient.SqlDataReader.ConsumeMetaData() +33 System.Data.SqlClient.SqlDataReader.get_MetaData() +83 System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +297 System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +954 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +162 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) +32 System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) +141 System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior) +12 System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) +10 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +130 System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior) +162 System.Data.Common.DbDataAdapter.Fill(DataTable dataTable) +115 --Edit There must be something outside the code itself - I've downloaded the database and run it against the same web site installed on a test server and it runs for longer than 30 seconds and returns the report. I've compared the machine.config and web.config files from the .Net directory on the live and test and they seem the same, compared the two IIS setups, also looked at the SQL Server configuration and the only difference is that the live server is clustered on 64bit W2K3 while the test server is on 32bit.

    Read the article

  • WCF/MSMQ Transport Security with Certificates

    - by user104295
    Hi there, my goal is to secure the communication between MSMQ Queue Managers – I don’t want unknown clients sending messages to my MSMQ server. I have spent many hours now trying to get Transport security working for the net.msmq binding in WCF, where MSMQ is in Workgroup mode and the client and server do not have Active Directory… so I’m using certificates. I have created a new X.509 certificate, called Kristan and put it into the “Trusted people” store on the server and into the My store of Current User of the client. The error I’m getting is: An error occurred while sending to the queue: Unrecognized error -1072824272 (0xc00e0030).Ensure that MSMQ is installed and running. If you are sending to a local queue, ensure the queue exists with the required access mode and authorization. Using smartsniff, I see that there’s no attempted connection with the remote MSMQ, however, it’s an error probably coming from the local queue manager. The stack trace is: at System.ServiceModel.Channels.MsmqOutputChannel.OnSend(Message message, TimeSpan timeout) at System.ServiceModel.Channels.OutputChannel.Send(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.OutputChannelBinder.Send(Message message, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) The code:- EndpointAddress endpointAddress = new EndpointAddress(new Uri(endPointAddress)); NetMsmqBinding clientBinding = new NetMsmqBinding(); clientBinding.Security.Mode = NetMsmqSecurityMode.Transport; clientBinding.Security.Transport.MsmqAuthenticationMode = MsmqAuthenticationMode.Certificate; clientBinding.Security.Transport.MsmqProtectionLevel = System.Net.Security.ProtectionLevel.Sign; clientBinding.ExactlyOnce = false; clientBinding.UseActiveDirectory = false; // start new var channelFactory = new ChannelFactory<IAsyncImportApi>(clientBinding, endpointAddress); channelFactory.Credentials.ClientCertificate.SetCertificate("CN=Kristan", StoreLocation.CurrentUser, StoreName.My); The queue is flagged as ‘Authenticated’ on the server. I have checked the effect of this and if I turn off all security in the client send, then I get ‘Signature is invalid’ – which is understandable and shows that it’s definitely looking for a sig. Are there are special ports that I need to check are open for cert-based msmq auth? thanks Kris

    Read the article

  • KeepAlive packets over a Soap request

    - by Nycto
    I've been debugging some Soap requests we are making between two servers on the same VLAN. The app on one server is written in PHP, the app on the other is written in Java. I can control and make changes to the PHP code, but I can't affect the Java server. The PHP app forms the XML using the DOMDocument objects, then sends the request using the cURL extension. When the soap request took longer than 5 minutes to complete, it would always wait until the max timeout limit and exit with a message like this: Operation timed out after 900000 milliseconds with 0 bytes received After sniffing the packets that were being sent, it turns out that the problem was caused by a 5 minute timeout in the network that was closing what it thought was a stale connection. There were two ways to fix it: bump up the timeout in iptables, or start sending KeepAlive packets over the request. To be thorough, I would like to implement both solutions. Bumping up the timeout was easy for ops to do, but sending KeepAlive packets is turning out to be difficult. The cURL library itself supports this (see the --keepalive-time flag for the CLI app), but it doesn't appear that this has been implemented in the PHP cURL library. I even checked the source to make sure it wasn't an undocumented feature. So my question is this: How the heck can I get these packets sent? I see a few clear options, but I don't like any of them: Write a wrapper that will kick off the request by shell_execing the CLI app. This is a hack that I just don't like Update the cURL extension to support this. This is a non-option according to Ops. Open the socket myself. I know just enough to be dangerous. I also haven't seen a way to do this with fsockopen, but I could be missing something. Switch to another library. What exists that supports this? Thanks for any help you can offer.

    Read the article

  • python / sqlite - database locked despite large timeouts

    - by Chris Phillips
    Hi, I'm sure I'm missing something pretty obvious, but I can't for the life of me stop my pysqlite scripts crashing out with a database is locked error. I have two scripts, one to load data into the database, and one to read data out, but both will frequently, and instantly, crash depending on what the other is doing with the database at any given time. I've got the timeout on both scripts set to 30 seconds: cx = sqlite.connect("database.sql", timeout=30.0) and think I can see some evidence of the timeouts in that i get what appears to be a timing stamp (e.g 0.12343827e-06 0.1 - and how do I stop that being printed?) dumped occasionally in the middle of my curses formatted output screen, but no delay that ever gets remotely near the 30 second timeout, but still one of the other keeps crashing again and again from this. I'm running RHEL5.4 on a 64 bit 4 cpu HS21 IBM blade, and have heard some mention about issues about multi-threading and am not sure if this might be relevant. Packages in use are sqlite-3.3.6-5 and python-sqlite-1.1.7-1.2.1, and upgrading to newer versions outside of RedHat's official provisions is not a great option for me. Possible, but not desirable due to the environment in general. I have had autocommit=1 on previously on both scripts, but have since disabled on both, and am now cx.commit()ing on the inserting script and not committing on the select script. Ultimately as I only ever have one script actually making any modifications, I don't really see why this locking should ever ever happen. I have noticed that this is significantly worse over time when the database has gotten larger. It was recently at 13mb with 3 equal sized tables, which was about 1 day's worth of data. creating a new file has significantly improved this, which seems understandable, but the timeout ultimately just doesn't seem to be being obeyed. Any pointers very much appreciated. Thanks Chris

    Read the article

  • How does Subsonic handle connections?

    - by Quintin Par
    In Nhibernate you start a session by creating it during a BeginRequest and close at EndRequest public class Global: System.Web.HttpApplication { public static ISessionFactory SessionFactory = CreateSessionFactory(); protected static ISessionFactory CreateSessionFactory() { return new Configuration() .Configure(Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "hibernate.cfg.xml")) .BuildSessionFactory(); } public static ISession CurrentSession { get{ return (ISession)HttpContext.Current.Items["current.session"]; } set { HttpContext.Current.Items["current.session"] = value; } } protected void Global() { BeginRequest += delegate { CurrentSession = SessionFactory.OpenSession(); }; EndRequest += delegate { if(CurrentSession != null) CurrentSession.Dispose(); }; } } What’s the equivalent in Subsonic? The way I understand, Nhibernate will close all the connections at endrequest. Reason: While trouble shooting some legacy code in a Subsonic project I get a lot of MySQL timeouts,suggesting that the code is not closing the connections MySql.Data.MySqlClient.MySqlException: error connecting: Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached. Generated: Tue, 11 Aug 2009 05:26:05 GMT System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. --- MySql.Data.MySqlClient.MySqlException: error connecting: Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached. at MySql.Data.MySqlClient.MySqlPool.GetConnection() at MySql.Data.MySqlClient.MySqlConnection.Open() at SubSonic.MySqlDataProvider.CreateConnection(String newConnectionString) at SubSonic.MySqlDataProvider.CreateConnection() at SubSonic.AutomaticConnectionScope..ctor(DataProvider provider) at SubSonic.MySqlDataProvider.GetReader(QueryCommand qry) at SubSonic.DataService.GetReader(QueryCommand cmd) at SubSonic.ReadOnlyRecord`1.LoadByParam(String columnName, Object paramValue) My connection string is as follows <connectionStrings> <add name="xx" connectionString="Data Source=xx.net; Port=3306; Database=db; UID=dbuid; PWD=xx;Pooling=true;Max Pool Size=12;Min Pool Size=2;Connection Lifetime=60" /> </connectionStrings>

    Read the article

  • select always returns -1 while trying to read from socket and stdin

    - by Aleyna
    Hello I have the following code implemented on C++(Linux) to check on my listening socket and stdin using select. select however keeps returning -1 no matter what I try to do! What's wrong with that code :s I will appreciate any help. Thanks highsock = m_sock; //listening socket memset((char *) &connectlist, 0, sizeof(connectlist)); memset((char *) &socks, 0, sizeof(socks)); int readsocks; struct timeval timeout; timeout.tv_sec = 60; timeout.tv_usec = 0; while (1) { updateSelectList(); //cout << "highest sock: " << highsock << endl; tempreadset = readset; readsocks = select(highsock+1, &tempreadset, NULL, NULL, &timeout); //cout << "# ready: " << readsocks << endl; if (readsocks < 0) { if (errno == EINTR) continue; cout << "select error" << endl; } if (readsocks > 0) { readFromSocks(); } } void readFromSocks() { if (FD_ISSET(STDIN, &readset)) { ... } else if (FD_ISSET(m_sock, &readset)) { ... } } void updateSelectList() { FD_ZERO(&readset); FD_SET(STDIN, &readset); FD_SET(m_sock, &readset); for (int i=0; i<MAXCONNECTIONS; i++) { if (connectlist[i] != 0) { FD_SET(connectlist[i], &readset); if (connectlist[i] > highsock) highsock = connectlist[i]; } } highsock = max(max(m_sock, STDIN), highsock); }

    Read the article

  • Stale connection with Pheanstalk

    - by token47
    I'm using beanstalkd to offload some work to other machines. The setup is a bit unusual, the server is on the internet (public ip) but the consumers are behind adsl lines on some peoples homes. So there is a linux server as client going out through a dynamic ip and connecting to the server to get a job. It's all PHP and I'm using pheanstalk library. Everything runs smoothly for some time, but then the adsl changes the IP (every 24h hours the provider forces a disconnect-reconnect) the client just hangs, never to go out of "reserve". I thought that putting a timeout on the reserve would help it, but it didn't. As it seems, the client issues a command and blocks, it never checks the timeout. It just issues a reserve-with-timeout (instead of a simple reserve) and it is the servers responsibility to return a TIME_OUT as the timeout occurs. The problem is, the connection is broken (but the TCP/IP doesn't know about that yet until any of the sides try to talk to the other side) and if the client blocked reading, it will never return. The library seems to have support for some kind of timeouts locally (for example when trying to connect to server), but it does not seem to contemplate this scenario. How could I detect the stale connection and force a reconnect? Is there some kind of keepalive on the protocol (and on the pheanstalk itself)? Thanks!

    Read the article

  • select failing with C program but not shell

    - by Gary
    So I have a parent and child process, and the parent can read output from the child and send to the input of the child. So far, everything has been working fine with shell scripts, testing commands which input and output data. I just tested with a simple C program and couldn't get it to work. Here's the C program: #include <stdio.h> int main( void ) { char stuff[80]; printf("Enter some stuff:\n"); scanf("%s", stuff); return 0; } The problem with with the C program is that my select fails to read from the child fd and hence the program cannot finish. Here's the bit that does the select.. //wait till child is ready fd_set set; struct timeval timeout; FD_ZERO( &set ); // initialize fd set FD_SET( PARENT_READ, &set ); // add child in to set timeout.tv_sec = 3; timeout.tv_usec = 0; int r = select(FD_SETSIZE, &set, NULL, NULL, &timeout); if( r < 1 ) { // we didn't get any input exit(1); } Does anyone have any idea why this would happen with the C program and not a shell one? Thanks!

    Read the article

  • What is a simple way to add a timer to a method

    - by John
    The following is in C#. I'm trying to do something very simple (I think). I have a method that loads an XML document XDocument doc = XDocument.Load(uri); , but I don't want to tie up pc resources if there are issues (connectivity, document size, etc.). So I'd like to be able to add a timeout variable that will cut the method off after a given number of seconds. I'm a newbie when it comes to asynchronous programming and find it confusing that there are so many examples written so many different ways . . . and none of them appear simple. I'd like a simple solution, if possible. Here's my thoughts so far on possible solution paths: 1) A method that wraps the existing load public XDocument LoadXDocument(string uri, int timeout){ //code } 2) A wrapper, but as an extension method XDocument doc = XDocument.LoadWithTimeout(string uri, int timeout); 3) A generic extension method. Object obj = SomeStaticClass.LoadWithTimeout(??? method, int timeout); 3), on its face seems really nice, because it would mean being able to generically add timeouts to many different method calls and not specifically tied to one type of object, but I suspect that it is either i)impossible or ii) very difficult. Please assist. Thanks.

    Read the article

  • ASP.NET exception gives irrelevant stack trace on YSOD, very challenging!

    - by pootow
    Here is the YSOD: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SqlException (0x80131904): Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.] System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +428 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +65 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +117 System.Data.SqlClient.SqlConnection.Open() +122 ECommerce.PMethod.Sql.SqlConns.Open() +78 ECommerce.PMethod.Sql.SqlConns..ctor() +120 ECommerce.login.DatasInfo.Proc.UserCenter.IsLogin(String UserGUID, Int32 UserID) +49 ECommerce.login.Rules.Users.UserLogin.isLogin() +44 Config.isUserLogined() +5 Shopping_Shopping.Page_Load(Object sender, EventArgs e) +10 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35 System.Web.UI.Control.OnLoad(EventArgs e) +99 System.Web.UI.Control.LoadRecursive() +50 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627 [TypeInitializationException: The type initializer for 'ECommerce.ERP.DAL.DBConn' threw an exception.] ECommerce.ERP.DAL.DBConn.get_ConnString() +0 [ObjectDefinitionStoreException: Factory method 'System.String get_ConnString()' threw an Exception.] Spring.Objects.Factory.Support.SimpleInstantiationStrategy.Instantiate(RootObjectDefinition definition, String name, IObjectFactory factory, MethodInfo factoryMethod, Object[] arguments) +257 Spring.Objects.Factory.Support.ConstructorResolver.InstantiateUsingFactoryMethod(String name, RootObjectDefinition definition, Object[] arguments) +624 Spring.Objects.Factory.Support.AbstractAutowireCapableObjectFactory.InstantiateUsingFactoryMethod(String name, RootObjectDefinition definition, Object[] arguments) +60 Spring.Objects.Factory.Support.AbstractAutowireCapableObjectFactory.CreateObjectInstance(String objectName, RootObjectDefinition objectDefinition, Object[] arguments) +56 Spring.Objects.Factory.Support.AbstractAutowireCapableObjectFactory.InstantiateObject(String name, RootObjectDefinition definition, Object[] arguments, Boolean allowEagerCaching, Boolean suppressConfigure) +436 [ObjectCreationException: Error thrown by a dependency of object 'styleService' defined in 'assembly [ECommerce.Services.Impl, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [ECommerce.Services.Impl.AppContext.xml] line 56' : Initialization of object failed : Factory method 'System.String get_ConnString()' threw an Exception. while resolving 'constructor argument with name promotionservice' to 'promotionService' defined in 'assembly [ECommerce.Services.Impl, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [ECommerce.Services.Impl.AppContext.xml] line 31' while resolving 'constructor argument with name domainservice' to 'promotionDomainService' defined in 'assembly [ECommerce.Domain, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [ECommerce.Domain.AppContext.xml] line 20' while resolving 'constructor argument with name promotionrepos' to 'promotionRepos' defined in 'assembly [ECommerce.Data.AdoNet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [ECommerce.Data.AdoNet.AppContext.xml] line 34' while resolving 'constructor argument with name connstr' to 'ECommerce.ERP.DAL.DBConn#389F399' defined in 'assembly [ECommerce.Data.AdoNet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [ECommerce.Data.AdoNet.AppContext.xml] line 34'] Spring.Objects.Factory.Support.ObjectDefinitionValueResolver.ResolveReference(IObjectDefinition definition, String name, String argumentName, RuntimeObjectReference reference) +394 Spring.Objects.Factory.Support.ObjectDefinitionValueResolver.ResolvePropertyValue(String name, IObjectDefinition definition, String argumentName, Object argumentValue) +312 Spring.Objects.Factory.Support.ObjectDefinitionValueResolver.ResolveValueIfNecessary(String name, IObjectDefinition definition, String argumentName, Object argumentValue) +17 Spring.Objects.Factory.Support.ConstructorResolver.ResolveConstructorArguments(String objectName, RootObjectDefinition definition, ObjectWrapper wrapper, ConstructorArgumentValues cargs, ConstructorArgumentValues resolvedValues) +993 Spring.Objects.Factory.Support.ConstructorResolver.AutowireConstructor(String objectName, RootObjectDefinition rod, ConstructorInfo[] chosenCtors, Object[] explicitArgs) +171 Spring.Objects.Factory.Support.AbstractAutowireCapableObjectFactory.AutowireConstructor(String name, RootObjectDefinition definition, ConstructorInfo[] ctors, Object[] explicitArgs) +65 Spring.Objects.Factory.Support.AbstractAutowireCapableObjectFactory.CreateObjectInstance(String objectName, RootObjectDefinition objectDefinition, Object[] arguments) +161 Spring.Objects.Factory.Support.AbstractAutowireCapableObjectFactory.InstantiateObject(String name, RootObjectDefinition definition, Object[] arguments, Boolean allowEagerCaching, Boolean suppressConfigure) +636 Spring.Objects.Factory.Support.AbstractObjectFactory.CreateAndCacheSingletonInstance(String objectName, RootObjectDefinition objectDefinition, Object[] arguments) +174 Spring.Objects.Factory.Support.WebObjectFactory.CreateAndCacheSingletonInstance(String objectName, RootObjectDefinition objectDefinition, Object[] arguments) +150 Spring.Objects.Factory.Support.AbstractObjectFactory.GetObjectInternal(String name, Type requiredType, Object[] arguments, Boolean suppressConfigure) +990 Spring.Objects.Factory.Support.AbstractObjectFactory.GetObject(String name) +10 Spring.Context.Support.AbstractApplicationContext.GetObject(String name) +20 ECommerce.Common.ServiceLocator.GetService() +334 ECommerce.Mvc.Controllers.StylesController..ctor() +72 [TargetInvocationException: Exception has been thrown by the target of an invocation.] System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck) +0 System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache) +86 System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache) +230 System.Activator.CreateInstance(Type type, Boolean nonPublic) +67 System.Web.Mvc.DefaultControllerFactory.GetControllerInstance(RequestContext requestContext, Type controllerType) +80 [InvalidOperationException: An error occurred when trying to create a controller of type 'ECommerce.Mvc.Controllers.StylesController'. Make sure that the controller has a parameterless public constructor.] System.Web.Mvc.DefaultControllerFactory.GetControllerInstance(RequestContext requestContext, Type controllerType) +190 System.Web.Mvc.DefaultControllerFactory.CreateController(RequestContext requestContext, String controllerName) +68 System.Web.Mvc.MvcHandler.ProcessRequestInit(HttpContextBase httpContext, IController& controller, IControllerFactory& factory) +118 System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContextBase httpContext, AsyncCallback callback, Object state) +46 System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContext httpContext, AsyncCallback callback, Object state) +63 System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) +13 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8677954 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155 Version Information: Microsoft .NET Framework Version:2.0.50727.3082; ASP.NET Version:2.0.50727.3082 Question is: the first stack trace is irrelevant to others, what happened? Any ideas? Let me make this more clear: a MVC page uses the spring part trying to load a lazy-init service which constructor wants a connection string through a static property like this: <object id="promotionRepos" type="ECommerce.Data.AdoNet.Promotions.PromotionRepos, ECommerce.Data.AdoNet" lazy-init="true"> <constructor-arg name="provider"> <null /> </constructor-arg> <constructor-arg name="connStr"> <object type="ECommerce.ERP.DAL.DBConn, ECommerce.ERP.DAL" factory-method="get_ConnString" /> </constructor-arg> <property name="RefreshInterval" value="00:00:10" /> </object> the timeout part is some what irrelevent to all others. see this in the first exception: Shopping_Shopping.Page_Load(Object sender, EventArgs e) +10 it's another page at all. And also, ECommerce.PMethod.Sql.SqlConns.Open() uses its own connection string, not the one loaded by spring, it's different module from diffrent team. And I am sure the connection string is correct. And, this ysod cames up randomly. Sometimes nothing is wrong, and sometimes, it appears. I thought there could be something wrong with my database or the network/firewall, I will check it later, but now I want understand this tricky stack trace.

    Read the article

  • Linux HA cluster w/Xen, Heartbeat, Pacemaker. domU does not failover to secondary node

    - by Kendall
    I am having the followig problem with an OenSuSE + Heartbeat + Pacemaker + Xen HA cluster: when the node a Xen domU is running on is "dead" the Xen domU running on it is not restarted on the second node. The cluster is setup with two nodes, each running OpenSuSE-11.3, Heartbeat 3.0, and Pacemaker 1.0 in CRM mode. For storage I am using a LUN on an iSCSI SAN device; the LUN is formatted with OCFS2 and managed with LVM. The Xen domU has two logical volumes; one for root and the other for swap. I am using IPMI cards for STONITH devices, and a dedicated ethernet link for heartbeat communications. The ha.cf file is as follows: keepalive 1 deadtime 10 warntime 5 udpport 694 ucast eth1 auto_failback off node dhcp-166 node stage use_logd yes crm yes My resources look as follows: shocrm(live)configure# show node $id="5c1aa924-bba4-4f95-a367-6c9a58ac4a38" dhcp-166 node $id="cebc92eb-af24-4833-aaf0-672adf80b58e" stage primitive Xen-Util ocf:heartbeat:Xen \ meta target-role="Started" \ operations $id="Xen-Util-operations" \ op start interval="0" timeout="60" start-delay="0" \ op stop interval="0" timeout="120" \ params xmfile="/etc/xen/vm/xen-util" primitive my-stonith stonith:external/ipmi \ params hostname="dhcp-166" ipaddr="192.168.3.106" userid="ADMIN" passwd="xxx" \ op monitor interval="2m" timeout="60s" primitive my-stonith2 stonith:external/ipmi \ params hostname="stage" ipaddr="192.168.3.105" userid="ADMIN" passwd="xxx" \ op monitor interval="2m" timeout="60s" property $id="cib-bootstrap-options" \ dc-version="1.0.9-89bd754939df5150de7cd76835f98fe90851b677" \ cluster-infrastructure="Heartbeat" The Xen domU config file is as follows: name = "xen-util" bootloader = "/usr/lib/xen/boot/domUloader.py" #bootargs = "xvda1:/vmlinuz-xen,/initrd-xen" bootargs = "--entry=xvda1:/boot/vmlinuz-xen,/boot/initrd-xen" memory = 4096 disk = [ 'phy:vg_xen/xen-util-root,xvda1,w', 'phy:vg_xen/xen-util-swap,xvda2,w', ] root = "/dev/xvda1" vif = [ 'mac=00:16:3e:42:42:06' ] #vfb = [ 'type=vnc,vncunused=0,vnclisten=192.168.3.172' ] extra = "" Say domU "Xen-Util" is running on node "stage"; if "stage" goes down, "Xen-Util" does not restart on node "dhcp-166". It seems to want to try as an "xm list" will show it for a few seconds and if you "xm console xen-util" it will give a message like "copying /boot/kernel.gz from xvda1 to /var/lib/xen/tmp/kernel.a53gs for booting". However, it never gets past that, eventually gives up, and no longer appears in "xm list". Now, when node "stage" comes back online after being power cycled, it detects that "Xen-Util" isn't running, and starts it (on stage). I've tried starting "Xen-Util" on node "dhcp-166" without the cluster running, and it works fine. No problems. So, I know it works in that respect. Any ideas? Thanks!

    Read the article

  • Can't get Monit to work

    - by Andrea
    I am trying to configure Monit on my local machine to get a taste at how it works, but I have some issues. What I am trying to do is to get any evidence that Monit is up and running correctly and is actually monitoring something. So my /etc/monit/monitrc looks like set daemon 60 set logfile /var/log/monit.log set idfile /var/lib/monit/id set statefile /var/lib/monit/state set eventqueue basedir /var/lib/monit/events slots 100 set httpd port 2812 and allow username:password check process apache2 with pidfile /usr/local/apache/logs/apache2.pid start program = "/etc/init.d/apache2 start" stop program = "/etc/init.d/apache2 stop" if failed port 6543 protocol http then exec "/usr/bin/touch /tmp/monit" If I understand correctly, since apache does not listen on port 6543 (it is just a random number) I should get an error, and as a consequence the file /tmp/monit should be created. So I start monit by sudo service monit start sudo monit monitor apache2 Unfortunately no such file is created. Instead the web console shows an error for apache - execution failed. The log says 'apache2' failed to start. What am I doing wrong? EDIT As suggested in the comments, I ran monit in verbose mode, by monit -vv monitor apache2 (the exact command suggested in the comments failed). The output is Runtime constants: Control file = /etc/monit/monitrc Log file = /var/log/monit.log Pid file = /var/run/monit.pid Debug = True Log = True Use syslog = False Is Daemon = True Use process engine = True Poll time = 60 seconds with start delay 0 seconds Expect buffer = 256 bytes Event queue = base directory /var/lib/monit/events with 100 slots Mail from = (not defined) Mail subject = (not defined) Mail message = (not defined) Start monit httpd = True httpd bind address = Any/All httpd portnumber = 2812 httpd signature = True Use ssl encryption = False httpd auth. style = Basic Authentication The service list contains the following entries: Process Name = apache2 Pid file = /usr/local/apache/logs/apache2.pid Monitoring mode = active Start program = '/etc/init.d/apache2 start' timeout 30 second(s) Stop program = '/etc/init.d/apache2 stop' timeout 30 second(s) Existence = if does not exist 1 times within 1 cycle(s) then restart else if succeeded 1 times within 1 cycle(s) then alert Pid = if changed 1 times within 1 cycle(s) then alert Ppid = if changed 1 times within 1 cycle(s) then alert Port = if failed localhost:6543 [HTTP via TCP] with timeout 5 seconds 1 times within 1 cycle(s) then exec '/usr/bin/touch /tmp/prova-monit' timeout 0 cycle(s) else if succeeded 1 times within 1 cycle(s) then alert System Name = system_andrea-Vostro-420-Series Monitoring mode = active

    Read the article

  • DIG command is hanging and not timing out as expected

    - by igalvez
    I ran into the following issue by accident when playing around with the DIG command and testing some domain names. Why does DIG hang and not timeout after 10 seconds when executing the following: dig +tries=1 +tries=1 +retry=1 +time=5 +trace google.us.com DIG hangs for about 30 seconds instead of timing out and then dies with the following error message: dig: couldn't get address for 'ns.reserved-domain.uk.com': no more Do I need to set another flag/option for DIG to have it timeout instead of hanging, or is this a bug? DIG version: DiG 9.9.5-3-Ubuntu

    Read the article

  • HAproxy roundrobin balancing does not appear to be distributing evently

    - by andrew
    Hello, I know that with loaded servers, roundrobin in HAproxy (1.4.4) does not evenly distribute, but my servers are currently getting NO traffic (test setup), and roundrobin balancing does www1,www1,www1,www1,www1,...www2,www2,www2,...,www1... I'm verifying this by having the script being run on each server cat /etc/HOSTNAME (slackware). I need to have it switch back and forth each time to test some session stuff (stored in shared memcached) but am having trouble getting it to switch between my two web servers on each request. global log 127.0.0.1 local0 warning maxconn 4096 chroot /usr/share/haproxy pidfile /var/run/haproxy.pid uid 99 gid 99 daemon defaults balance roundrobin fullconn 100 maxconn 4096 mode http option dontlognull option http-server-close option forwardfor option redispatch retries 3 timeout connect 5000 timeout client 20000 timeout server 60000 timeout queue 60000 stats enable stats uri /haproxy stats auth ***:*** frontend www *:80 log global acl is_upload hdr_dom(host) -i uploads.site.com acl is_api hdr_dom(host) -i api.site.com acl is_dev hdr_dom(host) -i dev.site.com acl is_apidev hdr_dom(host) -i apidev.site.com use_backend uploads.site.com if is_upload use_backend api.site.com if is_api use_backend dev.site.com if is_dev !is_apidev default_backend site.com backend site.com option httpchk HEAD /alive.php HTTP/1.1\r\nHost:site.com server www1 1.1.1.1:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 server www2 1.1.1.2:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 backend api.site.com option httpchk HEAD /alive.php HTTP/1.1\r\nHost:api.site.com server www1 1.1.1.1:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 server www2 1.1.1.2:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 backend dev.site.com option httpchk HEAD /alive.php HTTP/1.1\r\nHost:dev.site.com server www1 1.1.1.1:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 server www2 1.1.1.2:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 backend uploads.site.com option httpchk HEAD /alive.php HTTP/1.1\r\nHost:uploads.site.com server www1 1.1.1.1:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 server www2 1.1.1.2:8080 backup weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 So basically, I have some different back-ends (I've verified the ACLs are working), with the default option "roundrobin" selected. I've tried removing weights, removing the minconn/maxconn/fullconn attributes for all servers (not just the backend I'm testing), tried removing the ACLs, etc. I've been testing on dev.site.com BTW. Anyone see a reason why I can't get something like www1,www2,www1,www2,...? Also, this is one of my first questions on here, so please let me know if I left anything needed out of my post. Thanks!

    Read the article

  • Configure Apache with a htaccess file to strip out unneeded respond-headers.

    - by Koning Baard XIV
    For ultimate speed, I want my Apache server strip unneeded headers from the response. Currently, the headers looks like this (excluding the status header): Connection:Keep-Alive Content-Length:200 Content-Type:text/html Date:Sat, 15 May 2010 16:28:37 GMT Keep-Alive:timeout=5, max=100 Server:Apache/2.2.14 (Unix) mod_ssl/2.2.14 OpenSSL/0.9.8l DAV/2 PHP/5.3.1 Phusion_Passenger/2.2.7 X-Powered-By:PHP/5.3.1 Which I want to be like: Connection:Keep-Alive Content-Type:text/html Keep-Alive:timeout=5, max=100 How can I configure this in a .htaccess file? Thanks

    Read the article

  • Trying to configure HWIC-3G-HSPA

    - by user1174838
    I'm trying to configure a couple of Cisco 1941 routes. The are both identical routers. Each as a HWIC-1T (Smart Serial interface) and a HWIC-3G-HSPA 3G interface. These routers are to be sent to remote sites. We have connectivity to one of the sites but if remote site A gors down we lose connectivity to remote site B. The HWIC-1T is the primary WAN interface using frame relay joining the two remote sites We want the HWIC-3G-HSPA to be usable for direct connectivity from head office to remote site B, and also the HWIC-3G-HSPA is do be used for comms between the remote sites when the frame relay is down (happens quite a bit). I initialy tried to do dynamic routing using EIGRP however in my lab setup of laptop - 1941 - 1941 - laptop, I was unable to get end to end connectivity. I later settled on static routing and have got end to end connectivity but only over frame relay, not the HWIC-3G-HSPA. The sanitized running config for remote site A: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteA ! boot-start-marker boot-end-marker ! ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" ! username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.2.5 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.2 255.255.255.252 encapsulation frame-relay cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.3.0 255.255.255.0 10.1.1.1 permanent ip route 192.168.3.0 255.255.255.0 Cellular0/1/0 210 permanent ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The sanitized running config for remote site B: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteB ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! no ip domain lookup ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.3.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.1 255.255.255.252 encapsulation frame-relay clock rate 2000000 cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi frame-relay intf-type dce ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored ppp ipcp dns request cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.2.0 255.255.255.0 10.1.1.2 permanent ip route 192.168.2.0 255.255.255.0 Cellular0/1/0 210 permanent ! kron occurrence PING in 1 recurring policy-list ICMP ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The last problem I'm having is the 3G interfaces go down after only a few minutes of inactivity. I've tried using kron to ping the local HWIC-3G-HSPA interface (cellular 0/1/0) every minute but that hasn't been successful. Manually pinging the IP assigned (by the telco) to ce0/1/0 does bring the interface up. Any ideas? Thanks

    Read the article

  • how to optimize apache on web-server

    - by Prakash
    how can I optimize the server with following configuration. It takes too much time to load a page. IBM X3200 M3 Server - 1 Intel Xeon Processor with 4 GB Ram Below is my current configuration for apache: Start Servers: 5 (Default) Minimum Spare Servers: 10 Maximum Spare Servers: 20 Server Limit: 500 Max Clients: 500 Max Requests Per Child: 10000 (Default) Keep-Alive: On Keep-Alive Timeout: 5 Max Keep-Alive Requests: 100 Timeout: 200

    Read the article

  • Change TCP wait for ACK timeouts in Win7/WinServer

    - by maseth
    Is there any possibility to change default wait for ACK timeout in TCP network on Windows 7 or Windows Server ? I'm using very slow network ( 1200 bps ) and want to tweak TCP. When using default parameters network stuck on multiple retransmissions . If I'm able to change the ACK timeout and tx window size I think that it would work. On Windows XP it was possible but cant find any document for Win7 and Win Server.

    Read the article

  • Message from Nagios Server

    - by user12213
    Nagios Server is monitoring my Server which hosts Windows Sharepoint. I am getting the following 2 alerts in my inbox from Nagios Server 1. Service: C:\ Drive Space State: CRITICAL Additional Info: CRITICAL - Socket timeout after 10 seconds 2. Service: CPU Load State: CRITICAL Additional Info: CRITICAL - Socket timeout after 10 seconds What do I infer from these?

    Read the article

  • Problem with bluetooth on android 2.1 (samsung spica i5700) where pairing works but connection does

    - by user319634
    I have a Samsung Spica i5700 which I already have updated to Android 2.1. I am using the phone with an application called Run.GPS (http://www.rungps.net). This application logs data such as GPS position, route, speed, bearing etc. It can also log heartrate provided the user has a Zephyr HxM bluetooth heart rate monitor ("HxM"), which I do have. I can pair the HxM to the phone through the standard bluetooth utility. I'm prompted for the PIN, which I enter and the device is shown as 'Paired but not connected'. In the Run.GPS application itself, I click on 'Connect Heartrate Monitor'. This times out after about 30 seconds and the error message is 'Could not connect to heartrate monitor. Please try other settings'. I used a friend's HTC Windows Mobile as a control device to see if the HxM works there. It does. The Run.GPS application automatically sets the baud rate (initially to 9600 IIRC, though the connection also worked with higher baud rates) and it is possible to choose between various COM ports as well as a .Net COM port. I did some testing on my Spica Android, to try to find out why the bluetooth connection doesn't work. Below are some log files that I connected over adb when I clicked on 'Connect to Heartrate Monitor' in the Run.GPS application. I would be interested in any tips (including if I'm posting to the wrong forum here ;-)) - whether or not it's possible to experiment with the baud rate in Android etc. I still don't know if the problem is with the Run.GPS application (I've posted already on the development forum there) or with Android 2.1. I checked out another application - Endomondo - which is also a sport tracking application which supports heartrate monitor only with the HxM. There, what looked like exactly the same error occurred - I clicked on 'Connect Zephyr HxM'. For a few seconds I was shown the 'Connecting...' status, but then it timed out into 'Not Connected'. I'm thus tending towards looking at Android for the problem. Here's the output of adb logcat while trying to connect ./adb logcat | grep Run.GPS D/WYNEX> (11551): Excute :: Run.GPS Trainer UV, (null) E/Run.GPS (11997): Cannot connect to BT device E/Run.GPS (11997): java.io.IOException: Service discovery failed E/Run.GPS (11997): at android.bluetooth.BluetoothSocket$SdpHelper.doSdp(BluetoothSocket.java:374) E/Run.GPS (11997): at android.bluetooth.BluetoothSocket.connect(BluetoothSocket.java:184) E/Run.GPS (11997): at ju.a(Unknown Source) E/Run.GPS (11997): at qk.j(Unknown Source) E/Run.GPS (11997): at fs.c(Unknown Source) E/Run.GPS (11997): at le.a(Unknown Source) E/Run.GPS (11997): at s.b(Unknown Source) E/Run.GPS (11997): at pb.a(Unknown Source) E/Run.GPS (11997): at as.a(Unknown Source) E/Run.GPS (11997): at am.b(Unknown Source) E/Run.GPS (11997): at gf.onTouchEvent(Unknown Source) E/Run.GPS (11997): at android.view.View.dispatchTouchEvent(View.java:3709) E/Run.GPS (11997): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:884) E/Run.GPS (11997): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:884) E/Run.GPS (11997): at com.android.internal.policy.impl.PhoneWindow$DecorView.superDispatchTouchEvent(PhoneWindow.java:1665) E/Run.GPS (11997): at com.android.internal.policy.impl.PhoneWindow.superDispatchTouchEvent(PhoneWindow.java:1107) E/Run.GPS (11997): at android.app.Activity.dispatchTouchEvent(Activity.java:2061) E/Run.GPS (11997): at com.android.internal.policy.impl.PhoneWindow$DecorView.dispatchTouchEvent(PhoneWindow.java:1649) E/Run.GPS (11997): at android.view.ViewRoot.handleMessage(ViewRoot.java:1694) E/Run.GPS (11997): at android.os.Handler.dispatchMessage(Handler.java:99) E/Run.GPS (11997): at android.os.Looper.loop(Looper.java:123) E/Run.GPS (11997): at android.app.ActivityThread.main(ActivityThread.java:4363) E/Run.GPS (11997): at java.lang.reflect.Method.invokeNative(Native Method) E/Run.GPS (11997): at java.lang.reflect.Method.invoke(Method.java:521) E/Run.GPS (11997): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) E/Run.GPS (11997): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) E/Run.GPS (11997): at dalvik.system.NativeStart.main(Native Method) E/Run.GPS (11997): Cannot connect to BT device E/Run.GPS (11997): java.io.IOException: Service discovery failed Here's the output of dmesg while trying to connect the heartrate monitor <4>[74726.239833] select 11691 (.serviceModeApp), adj 15, size 3205, to kill <4>[74726.240741] select 11739 (com.wssnps), adj 15, size 3207, to kill <4>[74726.246870] select 11750 (id.partnersetup), adj 15, size 3219, to kill <4>[74726.253390] select 11857 (p.bluetoothicon), adj 15, size 3299, to kill <4>[74726.259879] select 13131 (ndroid.settings), adj 15, size 4586, to kill <4>[74726.266372] send sigkill to 13131 (ndroid.settings), adj 15, size 4586 <7>[74733.945097] [BT] GPIO_BT_WAKE = 1 <7>[74733.945121] [BT] wake_lock(bt_wake_lock) <7>[74733.951799] [BT] GPIO_BT_HOST_WAKE = 1 <7>[74733.951822] [BT] wake_lock timeout = 5 sec <7>[74735.890196] [BT] GPIO_BT_HOST_WAKE = 0 <7>[74736.150987] [BT] GPIO_BT_HOST_WAKE = 1 <7>[74736.151009] [BT] wake_lock timeout = 5 sec <7>[74737.490185] [BT] GPIO_BT_HOST_WAKE = 0 <7>[74740.073913] [BT] GPIO_BT_HOST_WAKE = 1 <7>[74740.073948] [BT] wake_lock timeout = 5 sec <7>[74741.315336] [BT] GPIO_BT_HOST_WAKE = 0 <7>[74743.249747] [BT] GPIO_BT_HOST_WAKE = 1 <7>[74743.249768] [BT] wake_lock timeout = 5 sec <7>[74744.865099] [BT] GPIO_BT_HOST_WAKE = 0 <7>[74745.154487] [BT] GPIO_BT_HOST_WAKE = 1 <7>[74745.154509] [BT] wake_lock timeout = 5 sec <7>[74748.852534] [BT] GPIO_BT_HOST_WAKE = 0 <7>[74749.156256] [BT] GPIO_BT_HOST_WAKE = 1 <7>[74749.156278] [BT] wake_lock timeout = 5 sec <7>[74750.490018] [BT] GPIO_BT_HOST_WAKE = 0 <4>[74754.230424] select 11691 (.serviceModeApp), adj 15, size 3191, to kill <4>[74754.231326] select 11739 (com.wssnps), adj 15, size 3193, to kill <4>[74754.237473] select 11750 (id.partnersetup), adj 15, size 3205, to kill <4>[74754.243950] select 11857 (p.bluetoothicon), adj 15, size 3283, to kill <4>[74754.250452] select 13140 (com.svox.pico), adj 15, size 3465, to kill <4>[74754.256787] send sigkill to 13140 (com.svox.pico), adj 15, size 3465

    Read the article

  • jquery hover not working properly other than IE6

    - by Kranthi
    Hi All, We developed navigation bar using jQuery 1.4.2. Functionality is to show submneus for different menu items when user hovers on it. It is working perfectly in IE6 but we see some weird problems in other browsers. In Firefox, when the page gets loaded, it works fine but when we hit f5, the submenu wont appear on hover. To get submenu we need to click on any other menu item. In Chrome, its the same to add on, some time even we click on any menu item, and hover submenu wont show up. In Safari, nothing shows up most of the times, but on clicking 5-6 menu items, submenu is shown.When we see loading text in safari it shows the submenu. but on every click the loading text wont appear.. We are very much confused..is it the browser behavior/code/jquery?? Below is the snippet: Html: <ul> <li><a class="mainLinks" href="google.com">Support</a> <ul><li>Sublink1</li></ul> </ul> Html code is absolutely fine. Jquery: var timeout = null; var ie = (document.all) ? true : false; $(document).ready(function(){ var $mainLink = null; var $subLink = null; $(".mainLinks").each(function(){ if ($(this).hasClass("current")) { $(this).mouseout(function() { var $this = $(this); timeout = setTimeout(function() { $(".popUpNav", $this.parent()).css({ visibility : 'hidden' }); $('.popUpArrow').hide(); ieCompat('show'); }, 200); }); } else { $(this).hover(function() { reset(); ieCompat('hide'); // Saving this for later use in the popUpNav hover event $mainLink = $(this); $popUpNav = $(".popUpNav", $mainLink.parent()); // Default width is width of one column var popupWidth = $('.popUpNavSection').width() + 20; // Calculate popup width depending on the number of columns var numColumns = $popUpNav.find('.popUpNavSection').length; if (numColumns != 0) { popupWidth *= numColumns; } var elPos = $mainLink.position(); var leftOffset = 0; if (elPos.left + popupWidth > 950) { leftOffset = elPos.left + popupWidth - 948; } $popUpNav.css({ top : elPos.top + 31 + 'px', left : elPos.left - leftOffset + 'px', visibility : 'visible', width : popupWidth + 'px' }); $('.popUpArrow').css({ left : elPos.left + Math.round(($mainLink.width() / 2)) + 20 + 'px', top : '27px' }).show(); }, function() { var $this = $(this); timeout = setTimeout(function() { $(".popUpNav", $this.parent()).css({ visibility : 'hidden' }); $('.popUpArrow').hide() ieCompat('show'); }, 200); } ); } }); $(".subLinks").hover( function(e) { $subLink = $(this); var elPos = $subLink.position(); var popupWidth = $(".popUpNavLv2",$subLink.parent()).width(); var leftOffset = 0; ieCompat('hide'); $(".popUpNavLv2",$subLink.parent()).css({ top : elPos.top + 32 + 'px', left : elPos.left - leftOffset + 'px', visibility : 'visible' }); }, function() { var $this = $(this); timeout = setTimeout(function() { $(".popUpNavLv2", $this.parent()).css({ visibility : 'hidden' }); }, 200); ieCompat('show'); } ); $('.popUpNav').hover( function() { clearTimeout(timeout); $mainLink.addClass('current'); $(this).css('visibility', 'visible'); $('.popUpArrow').show(); }, function() { $mainLink.removeClass('current'); $(this).css('visibility', 'hidden'); $('.popUpArrow').hide(); ieCompat('show'); } ); $('.popUpNavLv2').hover( function() { clearTimeout(timeout); $(this).css('visibility', 'visible'); ieCompat('hide'); }, function() { ieCompat('show'); $(this).css('visibility', 'hidden'); } ); // If on mac, reduce left padding on the tabs if (/mac os x/.test(navigator.userAgent.toLowerCase())) { $('.mainLinks, .mainLinksHome').css('padding-left', '23px'); } }); Thanks a lot in advance for looking into it. Thanks | Kranthi

    Read the article

  • Rails: Open HTTP URL From HTTPS site

    - by Imran
    I have a rails application running on SSL. I also have setup Piwik (for analytics) and it is running non-secure i.e. HTTP. When I try to make a call to Piwik API from my ruby code (the application running on SSL) it gives me the following error: SocketError (getaddrinfo: Name or service not known): /usr/lib/ruby/1.8/net/http.rb:560:in initialize' /usr/lib/ruby/1.8/net/http.rb:560:inopen' /usr/lib/ruby/1.8/net/http.rb:560:in connect' /usr/lib/ruby/1.8/timeout.rb:53:intimeout' /usr/lib/ruby/1.8/timeout.rb:93:in timeout' /usr/lib/ruby/1.8/net/http.rb:560:inconnect' /usr/lib/ruby/1.8/net/http.rb:553:in do_start' /usr/lib/ruby/1.8/net/http.rb:542:instart' /usr/lib/ruby/1.8/net/http.rb:379:in get_response' app/controllers/piwik_charts_controller.rb:195:inmake_graph' It works perfect when I make call from an application running on HTTP. Please advise. Thanks, Imran

    Read the article

  • C#: How to set AsyncWaitHandle in Compact Framework?

    - by Thorsten Dittmar
    Hi, I'm using a TcpClient in one of my Compact Framework 2.0 applications. I want to receive some information from a TCP server. As the Compact Framework does not support the timeout mechanisms of the "large" framework, I'm trying to implement my own timeout-thing. Basically, I want to do the following: IAsyncResult result = client.BeginRead(buffer, 0, size, ..., stream); if (!result.AsyncWaitHandle.WaitOne(5000, false)) // Handle timeout private void ReceiveFinished(IAsyncResult ar) { NetworkStream stream = (NetworkStream)ar.AsyncState; int numBytes = stream.EndRead(ar); // SIGNAL IASYNCRESULT.ASYNCWAITHANDLE HERE ... HOW?? } I'd like to call Set for the IAsyncResult.AsyncWaitHandle, but it doesn't have such a method and I don't know which implementation to cast it to. How do I set the wait handle? Or is it automatically set by calling EndRead? The documentation suggests that I'd have to call Set myself... Thanks for any help!

    Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >