Search Results

Search found 4224 results on 169 pages for 'wireless'.

Page 34/169 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• I just ordered 70/10 internet service, and need a new router I think?

  - by data_jepp

  Before I had 25/5 service and the N standard router did just fine. Now it doesn't do the job. Online speedtest reads at 82 so I have the line. But my laptop is getting less than 30 in my room. My laptop has the following WiFi card: http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6205.html What is this talk about 2.4 and 5GHz? Can my laptop be connected at once over both bands? And would that let me use the full 70Mb over Wi-Fi?

  Read the article

• MAC and PC problems on home network

  - by tombull89

  Hello! At home we have a wireless router that my family want to use. We have our main computer physically connected to the router, and my laptop is connected wirelessly. When the network is like this then it is faultless. However, when my brother introduces is Apple MAC into the equation, both my laptop and the family machine gets all sorts of problems, primarily long load times and timeouts. The MAC, however, works fine. I think I've read something here or SF about a MAC continusly pinging a router which times it out, but I've not found any solution so far. Router: Belkin F5D7634uk4A-H Home Computer: XP SP3 My Laptop: Windows 7, Ultimate Mac: 13" Macbook Pro, Snow Lepoard

  Read the article

• Can I bridge two wired networks with a Netgear WG602 (v4)

  - by Mr. Flibble

  I have two networks and I want to join them. Only one has a router. The other is currently just a bunch of computers joined via a switch. So it looks a little like this: 1. Router + comp1 + comp2 + wireless ap 2. comp3 + comp4 + Netgear WG602 Is it possible to use the WG602 to connect to the WIFI of the main network (the one with the router) and connect via wire to the 2nd network - therefore allowing the computers on network 2 to use the router on network 1?

  Read the article

• I just ordered 70/10 line, and need a new router I think?

  - by data_jepp

  Before I had the 25/5 line and the n standard router did just fine. Now it doesn't do the job. Online speedtest reads at 82 so I have the line. But my laptop is getting less than 30 in my room. My laptop has the following WiFi card: http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6205.html What is this talk about 2,5 and 5ghz? Can my laptop be connected at once over both bandwidths? And that would let me use the full 70Mb over wifi? Hope it's ok to ask network questions here.

  Read the article

• Using a MiFi via WDS

  - by Joril

  I have a Huawei R201 MiFi connected to the internet, and I'd like to use its internet connection even from devices that don't have WiFi, so I grabbed a wireless router I had lying around and configured WDS so that it'd connect to the MiFi, and this is working nicely (I can ping the MiFi from the router web interface). The next step was connecting my PC to the router via ethernet cable, but now I'm stuck... The PC can ping the router, but not the MiFi (they're all on the same subnet). Since the router can ping the MiFi, I guess this is some kind of routing issue? Should I get a more "flexible" router, such as one with DD-WRT maybe? Is what I'm trying to do even possible? (For the record the PC is running Lubuntu 11.10)

  Read the article

• Bridging my laptop's wireless and wired adaptors

  - by stacey.richards

  I would like to be able to connect a desktop computer that does not have a wireless adapter to my wireless network. I could just run a network cable from my ADSL/wireless router to the desktop computer but sometimes this is not practical. What I would really like to do is bridge my laptop's wireless and wired adapters in such a way that I can run a network cable from my laptop to a switch and another network cable from the switch to a desktop computer so that the desktop computer can access the Internet through my ADSL/wireless router via my latop: +--------------------+ |ADSL/wireless router| +--------------------+ | +-------------------------+ |laptop's wireless adaptor| | | |laptop's wired adaptor | +-------------------------+ | +------+ |switch| +------+ | +-----------------------+ |desktop's wired adapter| +-----------------------+ A bit of Googling suggests that I can do this by bridging my laptop's wireless and wired adapters. In Windows XP's Network Connections I select both the Local Area Connection and the Wireless Network Connection, right click and select Bridge Connections. From what I gather, this (layer 2?) bridge will examine the MAC address of traffic coming from the wireless network and pass it through to the wired network if it suspects that a network adapter with that MAC address may be on the wired side, and vice-versa. If this is the case, I would assume that when the desktop computer attempts to get an IP address from a DHCP server (which is running on the ADSL/wireless router), it would send a DHCP broadcast packet which would pass through the laptop's bridge to the router and the reply would return through the laptop's bridge back to the desktop. This doesn't happen. With some more Googling I find some instruction how this can be done with Linux. I reboot to Ubuntu 9.10 and type the following: sudo apt-get install bridge-utils sudo brctl addbr br0 sudo brctl addif br0 wlan0 sudo brctl addif br0 eth0 sudo ipconfig wlan0 0.0.0.0 sudo ipconfig eth0 0.0.0.0 Once again, the desktop cannot reach the ADSL/wireless router. I suspect that I'm missing some simple important step. Can anyone shed some light on this for me?

  Read the article

• How can we connect TP-link Access Point- TL-WA5210G with Wifi Lan card?

  - by PPS

  I would like to know that, We have a small Wireless Network that covers 40 mtrs indoor. Now we plan to expand our Network Coverage area apporx. 200 Mtrs (Outdoor). Due to our requirement we used TP- Link Access Point TL-WA5210G Outdoor(This AP covers 15Km area). We have 3 blocks between 200 mtrs, We like to connect all the laptops Lan Card directly with required Access-point. What should we do to achieve this, right now we are not getting the full strength signal, when we cross the 80 mtrs. So please suggest me proper configuration for implementing this TP-Link access point. Thanks PPS

  Read the article

• How to set up Asus RT-N66U in bridge mode with wired connection to main router?

  - by Milligan

  I have a wired router (TP-Link RT-860) in the basement where the cable service comes in. Eight wired ethernet connections span two buildings. I currently have a Linksys wireless router set up in bridge mode, but its signal doesn't span the whole area. I have purchased an Asus RT-N66U to replace it, but I can't figure out how to set it up in bridge mode. Does anyone know if this is possible? Second question: Would there be any advantage in installing DD-WRT on the Asus?

  Read the article

• Aircrack-ng Usage on Windows (XP) -- Needs clear steps

  - by Alvin

  I've found that Aircrack-ng is very powerful tool for wireless hacking. But it is a bit complicated to use (even with its documentation). Also, when I run the GUI, it needs to add a "capture file". What is that? Additionally, it says Windows version is weaker than the Linux version. So how can I get it to run like a Linux version? What are some step-by-step instructions (to use on Windows XP)?

  Read the article

• How to test Laptop NIC's throughput using a router and PC - without be bounded?

  - by 0x90

  My setup includes: Cisco router An i-7 PC running windows A laptop with high speed wifi nic, which I want to check its throughput. I would like to run an FTP server on the PC. hook the router over cables to the PC. I would like to have the PC create its own subnet accessible via the cisco router that would be hooked directly to the PC's nic. From the laptop I want to connect via wifi to the PC's wireless router and connect to the ftp server on the PC. is it possible? how do i connect the router to the PC nic and make it broadcast a subnet via wifi for my laptop to connect to? how do i configure an FTP server to operate only on this subnet?

  Read the article

• CSMA between APs in same channel & different SSID ?

  - by Ranganathan

  Would be great if someone clarifies this doubt. Lets assume two Wireless Access Points AP1 & AP2 with these conditions 1. both in the same 802.11 standard 2. same channel 3. using different SSIDs (just like in adjacent apartment houses). In this case, do these two Access points (and the clients associated to them) coordinate via CSMA/CA ? ie., if one of the AP's or a client station is about to transmit, does it wait & observe the other AP's & its clients' transmission before sending the frame in air ? Also, do the clients associated with these different APs coordinate via CSMA/CA ?

  Read the article

• IntelliPoint & Intellitype upgrade to Mouse and Keyboard Center causing system freeze?

  - by Kent England

  I allowed Microsoft to upgrade my wireless keyboard 6000 v3.0 and mouse 6000 v2.0 from Intelliyada v 8.20.468 to what appears to be v9.1.486. This was some time ago, so I can't be certain but this upgrade might be causing my system to freeze on the logon screen (user selection) in Windows 7 Home Premium 32-bit. Mouse and keyboard don't work, but system seems to be running underneath. No indication in Event Viewer about keyboard/mouse driver issues. Might be problem with transceiver hardware. I now have the "Microsoft Mouse and Keyboard Center" UI which isn't very helpful (seems to be very metro) in debugging these drivers. I'm just looking to see if anyone else had problems upgrading to this new Intelliyada software for their MS keyboard and rodent.

  Read the article

• Some explaination on WLAN adaptor antennas and radios

  - by gert_78

  We have a desktop in a room where the is no wired connection that has bad reception from the wireless AP. Someone (I don't remember who of course) told me there are high gain antennas that will make it possible to get a better reception (and throughput). I believe he said they are adaptors with "high gain" antennas. He also told me he uses it in hotels when he has a bad WLAN reception. When he connects that card the reception and speed is a lot better all of a sudden. But can someone explain me in understandable language what that is and what the thing with high gain, dB, dBi and mW is all about please? What type of card do we need? On like this or this?

  Read the article

• How do I install a driver for an Atheros AR9285?

  - by Fernando

  How to install the driver for Atheros AR9285 in Ubuntu 11.10. Still no package for 11.10 according to this https://help.ubuntu.com/community/WifiDocs/Device/Atheros/AR9285 Here is the output of the commands marc@fer-VPCYA1V9E:~$ sudo lshw -class network *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 4c:0f:6e:d6:65:cc width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.0.0-12-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:16 memory:d3400000-d340ffff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: c0 serial: 54:42:49:a2:1f:bc capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:d2400000-d243ffff ioport:1000(size=128) And the second command marc@fer-VPCYA1V9E:~$ rfkill list 0: sony-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: sony-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no 4: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no Is there a way to make it work?

  Read the article

• Cannot get realtek8188ee to work in 14.04

  - by dang42

  I have a Toshiba Satellite C55-A5300 laptop. When I run lspci -nn it shows 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188EE Wireless Network Adapter [10ec:8179] (rev 01) It has always had the common problem others have asked about here (and many, many other places on the web) where it would connect, then drop the connection at random intervals. I tried every solution I could find, here & elsewhere, and they always caused errors after running "make" (more details below), but as I could still connect to networks I just dealt with it. I upgraded to 14.04 a few days ago and now it won't connect at all - I need help getting this to work. I originally followed the instructions posted by chili555 found here: Wireless not working on Toshiba Satellite C55-A5281, but I get the following errors when running "make": /home/dan/backports-3.11-rc3-1/net/wireless/sysfs.c:151:2: error: unknown field ‘dev_attrs’ specified in initializer .dev_attrs = ieee80211_dev_attrs, ^ /home/dan/backports-3.11-rc3-1/net/wireless/sysfs.c:151:2: warning: initialization from incompatible pointer type [enabled by default] /home/dan/backports-3.11-rc3-1/net/wireless/sysfs.c:151:2: warning: (near initialization for ‘ieee80211_class.suspend’) [enabled by default] make[6]: * [/home/dan/backports-3.11-rc3-1/net/wireless/sysfs.o] Error 1 make[5]: [/home/dan/backports-3.11-rc3-1/net/wireless] Error 2 make[4]: [module/home/dan/backports-3.11-rc3-1] Error 2 make[3]: [modules] Error 2 make2: [modules] Error 2 make1: * [modules] Error 2 make: * [default] Error 2 I have no clue how to diagnose the problem or how to proceed from here. I also don't know what information one might need from me in order to move forward. I'll be happy to share anything you'd like to know if it results in this thing (finally!) working properly. Thanks in advance for any / all help. ETA: I did see this post - Realtek 8188ee wireless driver SOLVED - and it looks like it is discussing the same problem I'm having, but I cannot for the life of me figure out what I had to add the testing repository to my /etc/apt/sources.list means, so I am still stuck.

  Read the article

• Configure a wireless network that accepts any WPA2-PSK network key

  - by Michel

  I recently bought a UART WiFi module ( this one ) and configured it with right SSID but wrong password( and I don't know what it is ). The problem is that I can't reset this module to its manufacture settings and I can't connect to this module via serial port to configure it with some wire or cable. But I'm sure that my module is trying to connect my access point but with wrong network key ( because in logs of my access point I can see my module that trying to connect but it can't ) So, I wonder to know is there any way to create or configure a network (using some access point or something else) based on WPA2 Personal security that accepts any WPA2-PSK passwords ? Or is there any other solution for this problem ? If no, is there anyway to see what password this module using to connect to that network ? ( If yes, then I can change password of my network to that password and access to this module's admin panel ) I tried create an open network ( without any security key ) but my module just searches for WPA2 based networks ( I think ).

  Read the article

• Sonicwall TZ 210 Enhanced OS - Allow Wireless to talk VPN

  - by Malnizzle

  Does anyone know how to allow the WLAN access to talk to a VPN subnet that is set up on a Sonicwall TZ 210 Enhanced? I got the WLAN (192.168.2.X) talking to the LAN (192.168.1.X), but I also need to the WLAN to talk to the VPN (192.168.3.X) Thanks!

  Read the article

• Help with router and spotty wireless...

  - by Moshe

  Time Warner Cable/ Road Runner router shows up some times on the network list on Mac OS X 10.6.3 Snow Leopard. It makes a spotty appearence on the list. The router is a SMC Networks Model # SMC8014WG-SI. The default gateway numbers all do not work. 192.168.0.1 192.168.1.1 192.168.2.1 10.10.10.1 What IP adress am I looking for here to log in to the router to fix the issue?

  Read the article

• Linux Mint Wireless doesn't connect

  - by guisantogui

  I'm having a great problem, I've installed Linux mint debian edition (LMDE), and following this tutorial http://community.linuxmint.com/tutorial/view/161 I did installed the network driver. The available connections appears to me, but when i try to connect to my connection at first time, I got this message: "(4) Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." And the following tries, I got this another message: "(32) Insufficient privileges." I'm accepting ideas. Thanks. EDIT: The last piece of the logs: Oct 5 00:22:38 gsouza-host ntpd[2116]: peers refreshed Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> (wlan0): bringing up device. Oct 5 00:22:42 gsouza-host wpa_supplicant[2055]: nl80211: 'nl80211' generic netlink not found Oct 5 00:22:42 gsouza-host wpa_supplicant[2055]: Failed to initialize driver 'nl80211' Oct 5 00:22:42 gsouza-host wpa_supplicant[2055]: rfkill: WLAN soft blocked Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> WiFi hardware radio set enabled Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> WiFi now enabled by radio killswitch Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> (wlan0): supplicant interface state: starting -> ready Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> (wlan0): supplicant interface state: ready -> inactive Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <warn> Trying to remove a non-existant call id. Oct 5 00:22:42 gsouza-host wpa_supplicant[2055]: rfkill: WLAN unblocked Oct 5 00:22:44 gsouza-host avahi-daemon[1827]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::7ae4:ff:fe4a:13a9. Oct 5 00:22:44 gsouza-host avahi-daemon[1827]: New relevant interface wlan0.IPv6 for mDNS. Oct 5 00:22:44 gsouza-host avahi-daemon[1827]: Registering new address record for fe80::7ae4:ff:fe4a:13a9 on wlan0.*. Oct 5 00:22:46 gsouza-host ntpd[2116]: Listen normally on 7 wlan0 fe80::7ae4:ff:fe4a:13a9 UDP 123 Oct 5 00:22:46 gsouza-host ntpd[2116]: peers refreshed

  Read the article

• Looking for cheap Wireless router, with USB for attached USB disk drive

  - by geoffc

  I have a 802.11b router at home (DLink DI-614+ (B rev)) and it is working perfectly well for me. I want to replace it though, since it is out of updates, and now several years old and heck, I want a new toy to configure! I was trying to decide what to get. I could care less about 802.11g or n support, since B is fast enough, but every device in my house is now B/G, so G would be fine for me. N buys me little to nothing. (Small enough house that range is a non-issue). The features I realized I want are a USB port for sharing a USB hard drive. I would like to have a central device I could store files on. I do not want to waste the power of an always running PC to do this, so a router seems like the place to go. I would love it, if it could support Vonage VOIP as well, then I could ditch a power brick from a second device (I have the small DLink Vonage VOIP box). All the current examples of this router (with USB drive, yet to find one with VOIP too!) are in the $100+ range, and N and silly, when a B/G is in the $30 range around here.

  Read the article

• Bad ways to secure wireless network c

  - by Moshe

  I was wondering if anybody had any thoughts on this, as I recently saw a Verizon DSL network set up where the WEP key was the last 8 characters of the router's MAC address. (It's bad enough that hey were using WEP in the first place...)

  Read the article

• How do I see the negotiated wireless speed in Windows 7 and OSX

  - by user26453

  In Windows XP when I connected to a network it would list the speed at which I connected, e.g. 54 mbps, 11 mbps, etc. Is there an equivalent place to see this in either Windows 7 or OS X? Since upgrading from XP I cannot see this info in Windows 7 and I've never been able to see it in OS X.

  Read the article

• Routing internet through ethernet to a computer without a Wireless adapter

  - by Decency

  I'm setting up a small home network. I have a laptop which connects to internet wirelessly- that works fine. I have a desktop connected to this laptop by an ethernet cable which I'd like to access the internet with. In the past, I have used a different laptop to do this and had no problems doing so. Both computers run Windows 7. I have tried setting up a homegroup and disabling Windows firewall, as well as restarting both computers. I can share data but my internet connection can not be accessed through the desktop. (I understand USB network adapters are cheap, I have one on the way but that doesn't solve this issue.) Any help or live chat support if you'd prefer would be appreciated. Thanks!

  Read the article

• Linux Mint Wireless doesn't connect [migrated]

  - by guisantogui

  I'm having a great problem, I've installed Linux mint debian edition (LMDE), and following this tutorial http://community.linuxmint.com/tutorial/view/161 I did installed the network driver. The available connections appears to me, but when i try to connect to my connection at first time, I got this message: "(4) Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." And the following tries, I got this another message: "(32) Insufficient privileges." I'm accepting ideas. Thanks.

  Read the article

• Windows Vista claims wireless key is the wrong length

  - by humble coffee

  A family member of mine is house sitting and has been given the details of their wifi. The access point is an Airport Express, it has WEP encryption (I think) and they've been given a passphrase to use. I know it's a passphrase and not the encrypted key as it's an English word. The passphrase is 10 characters long. The problem is that Vista complains that it's not a valid key as it must be a 5 or 13 character non-hex key or a 10 or 26 character hex key. (From what I've read this suggests the encryption is WEP?) I've found a couple of suggested solutions, but I'm not actually at the house at the moment so I wanted to make sure I have a good chance of getting it to work when I'm there but have no internets to ask. Solution 1: Vista needs to be told explicitly what kind of encryption and key is being used. Specify in the connection settings that you are using WEP and that it is a "shared key". Solution2: Try converting the passphrase to hexadecimal using an ASCII-hex converter and entering that.

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >