Search Results

Search found 9167 results on 367 pages for 'product backlog'.

Page 340/367 | < Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >

  • Deep in the Heart of Texas

    - by Applications User Experience
    Author: Erika Webb, Manager, Fusion Applications UX User Assistance When I was first working in the usability field, the only way I could consider conducting a usability study was to bring a potential user to a lab environment where I could show them whatever I was interested in learning more about and ask them questions. While I hate to reveal just how long I have been working in this field, let's just say that pads of paper and a stopwatch were key tools for any test I conducted. Over the years, I have worked in simple labs with basic video taping equipment and not much else, and I have worked in corporate environments with sophisticated usability labs and state-of-the-art equipment. Years ago, we conducted all usability studies at the location of the user. If we wanted to see if there were any differences between users in New York, Chicago, and Los Angeles, we went to those places to run the test. A lab environment is very useful for many test situations. However, there has always been a debate in the usability field about whether bringing someone into a lab environment, however friendly we make it, somehow intrinsically changes the behavior of the user as compared to having them work in their own environment, at their own desk, and on their own computer. We developed systems to create a portable usability lab, so that we could go to the users that we needed to test.  Do lab environments change user behavior patterns? Then 9/11 hit. You may not remember, but no planes flew for weeks afterwards. Companies all over the world couldn't fly-in employees for meetings. Suddenly, traveling to the location of the users had an additional difficulty. The company I was working for at the time had usability specialists stuck in New York for days before they could finally rent a car and drive home to Colorado. This changed the world pretty suddenly, and technology jumped on the change. Companies offering Internet meeting tools were strugglinguntil no one could travel. The Internet boomed with collaboration tools that enabled people to work together wherever they happened to be. This change in technology has made a huge difference in my world. We use collaborative tools to bring our product concepts and ideas to the user across the Internet. As a global company, we benefit from having users from all over the world inform our designs. We now run usability studies with users all over the world in a single day, a feat we couldn't have accomplished 10 years ago by plane! Other technology companies have started to do more of this type of usability testing, since the tools have improved so dramatically. Plus, in our busy world, it's not always easy to find users who can take the time away from their jobs to come to our labs. reaching users where it is convenient for them greatly improves the odds that people do participate. I manage a team of usability specialists who live in India and California, whlie I live in Colorado. We have wonderful labs that we bring users into to show them our products. But very often, we run our studies remotely. We used to take the lab to the users now we use the labs, but we let the users stay where they are. We gain users who might not have been able to leave work to come to our labs, and they get to use the system they are familiar with. And we gain users nearly anywhere that we can set up an Internet connection, as long as the users have a phone, a broadband connection, and a compatible Web browser (with no pop-up blockers). After we recruit participants in a traditional manner, we send them an invitation to participate through the use of a telephone conference call and Web conferencing tool. At Oracle, we use Oracle Web Conference part of Oracle Collaboration Suite, which enables us to give the user control of the mouse, while we present a prototype or wireframe pictures. We can record the sessions over the Web and phone conference. We send the users instructions, plus tips to ensure that we won't have problems sharing screens. In some cases, when time is tight, we even run a five-minute "test session" with users a day in advance to be sure that we can connect. Prior to the test, we send users a participant script that contains information about the study, including any questionnaires. This is exactly the same script we give to participants who come to the labs. We ask users to print this before the beginning of the session. We generally run these studies by having a usability engineer in our usability labs, so that we can record the session as though the user were in the lab with us. Roughly 80% of our application software usability testing at Oracle is performed using remote methods. The probability of getting a   remote test participant decreases the higher up the person is in the target organization. We have a methodology checklist available to help our usability engineers work through the remote processes.

    Read the article

  • The Oracle Graduate Experience...A Graduates Perspective by Angelie Tierney

    - by david.talamelli
    [Note: Angelie has just recently joined Oracle in Australia in our 2011 Graduate Program. Last week I shared my thoughts on our 2011 Graduate Program, this week Angelie took some time to share her thoughts of our Graduate Program. The notes below are Angelie's overview from her experience with us starting with our first contact last year - David Talamelli] How does the 1 year program work? It consists of 3 weeks of training, followed by 2 rotations in 2 different Lines of Business (LoB's). The first rotation goes for 4 months, while your 2nd rotation goes for 7, when you are placed into your final LoB for the program. The interview process: After sorting through the many advertised graduate jobs, submitting so many resumes and studying at the same time, it can all be pretty stressful. Then there is the interview process. David called me on a Sunday afternoon and I spoke to him for about 30 minutes in a mini sort of phone interview. I was worried that working at Oracle would require extensive technical experience, but David stressed that even the less technical, and more business-minded person could, and did, work at Oracle. I was then asked if I would like to attend a group interview in the next weeks, to which I said of course! The first interview was a day long, consisting of a brief introduction, a group interview where we worked on a business plan with a group of other potential graduates and were marked by 3 Oracle employees, on our ability to work together and presentation. After lunch, we then had a short individual interview each, and that was the end of the first round. I received a call a few weeks later, and was asked to come into a second interview, at which I also jumped at the opportunity. This was an interview based purely on your individual abilities and would help to determine which Line of Business you would go to, should you land a graduate position. So how did I cope throughout the interview stages? I believe the best tool to prepare for the interview, was to research Oracle and its culture and to see if I thought I could fit into that. I personally found out about Oracle, its partners as well as competitors and along the way, even found out about their part (or Larry Ellison's specifically) in the Iron Man 2 movie. Armed with some Oracle information and lots of enthusiasm, I approached the Oracle Graduate Interview process. Why did I apply for an Oracle graduate position? I studied a Bachelor of Business/Bachelor of Science in IT, and wanted to be able to use both my degrees, while have the ability to work internationally in the future. Coming straight from university, I wasn't sure exactly what I wanted to do in terms of my career. With the program, you are rotated across various lines of business, to not only expose you to different parts of the business, but to also help you to figure out what you want to achieve out of your career. As a result, I thought Oracle was the perfect fit. So what can an Oracle ANZ Graduate expect? First things first, you can expect to line up for your visitor pass. Really. Next you enter a room full of unknown faces, graduates just like you, and then you realise you're in this with 18 other people, going through the same thing as you. 3 weeks later you leave with many memories, colleagues you can call your friends, and a video of your presentation. Vanessa, the Graduate Manager, will also take lots of photos and keep you (well) fed. Well that's not all you leave with, you are also equipped with a wealth of knowledge and contacts within Oracle, both that will help you throughout your career there. What training is involved? We started our Oracle experience with 3 weeks of training, consisting of employee orientation, extensive product training, presentations on the various lines of business (LoB's), followed by sales and presentation training. While there was potential for an information overload, maybe even death by Powerpoint, we were able to have access to the presentations for future reference, which was very helpful. This period also allowed us to start networking, not only with the graduates, but with the managers who presented to us, as well as through the monthly chinwag, HR celebrations and even with the sharing of tea facilities. We also had a team bonding day when we recorded a "commercial" within groups, and learned how to play an Irish drum. Overall, the training period helped us to learn about Oracle, as well as ourselves, and to prepare us for our transition into our rotations. Where to now? I'm now into my 2nd week of my first graduate rotation. It has been exciting to finally get out into the work environment and utilise that knowledge we gained from training. My manager has been a great mentor, extremely knowledgeable, and it has been good being able to participate in meetings, conference calls and make a contribution towards the business. And while we aren't necessarily working directly with the other graduates, they are still reachable via email, Pidgin and lunch and they are important as a resource and support, after all, they are going through a similar experience to you. While it is only the beginning, there is a lot more to learn and a lot more to experience along the way, especially because, as we learned during training, at Oracle, the only constant is change.

    Read the article

  • Cannot connect to secure wireless with Netgear wna3100 USB

    - by Vince Radice
    I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

    Read the article

  • Adding a Network Loopback Adapter to Windows 8

    - by Greg Low
    I have to say that I continue to be frustrated with finding out how to do things in Windows 8. Here's another one and it's recorded so it might help someone else. I've also documented what I tried so that if anyone from the product group ever reads this, they'll understand how I searched for it and might try to make it easier.I wanted to add a network loopback adapter, to have a fixed IP address to work with when using an "internal" network with Hyper-V. (The fact that I even need to do this is also painful. I don't know why Hyper-V can't make it easy to work with host system folders, etc. as easily as I can with VirtualPC, VirtualBox, etc. but that's a topic for another day).In the end, what I needed was a known IP address on the same network that my guest OS was using, via the internal network (which allows connectivity from the host OS to/from guest OS's).I started by looking in the network adapters areas but there is no "add" functionality there. Realising that this was likely to be another unexpected challenge, I resorted to searching for info on doing this. I found KB article 2777200 entitled "Installing the Microsoft Loopback Adapter in Windows 8 and Windows Server 2012". Aha, I thought that's what I'd need. It describes the symptom as "You are trying to install the Microsoft Loopback Adapter, but are unable to find it." and that certainly sounded like me. There's a certain irony in documenting that something's hard to find instead of making it easier to find. Anyway, you'd hope that in that article, they'd then provide a step by step example of how to do it, but what they supply is this: The Microsoft Loopback Adapter was renamed in Windows 8 and Windows Server 2012. The new name is "Microsoft KM-TEST Loopback Adapter". When using the Add Hardware Wizard to manually add a network adapter, choose Manufacturer "Microsoft" and choose network adapter "Microsoft KM-TEST Loopback Adapter".The trick with this of course is finding the "Add Hardware Wizard". In Control Panel -> Hardware and Sound, there are options to "Add a device" and for "Device Manager". I tried the "Add a device" wizard (seemed logical to me) but after that wizard tries it's best, it just tells you that there isn't any hardware that it thinks it needs to install. It offers a link for when you can't find what you're looking for, but that leads to a generic help page that tells you how to do things like turning on your printer.In Device Manager, I checked the options in the program menus, and nothing useful was present. I even tried right-clicking "Network adapters", hoping that would lead to an option to add one, also to no avail.So back to the search engine I went, to try to find out where the "Add Hardware Wizard" is. Turns out I was in the right place in Device Manager, but I needed to right-click the computer's name, and choose "Add Legacy Hardware". No doubt that hasn't changed location lately but it's a while since I needed to add one so I'd forgotten. Regardless, I'm left wondering why it couldn't be in the menu as well.Anyway, for a step by step list, you need to do the following:1. From Control Panel, select "Device Manager" under the "Devices and Printers" section of the "Hardware and Sound" tab.2. Right-click the name of the computer at the top of the tree, and choose "Add Legacy Hardware".3. In the "Welcome to the Add Hardware Wizard" window, click Next.4. In the "The wizard can help you install other hardware" window, choose "Install the hardware that I manually select from a list" option and click Next.5. In the "The wizard did not find any new hardware on your computer" window, click Next.6. In the "From the list below, select the type of hardware you are installing" window, select "Network Adapters" from the list, and click Next.7. In the "Select Network Adapter" window, from the Manufacturer list, choose Microsoft, then in the Network Adapter window, choose "Microsoft KM-TEST Loopback Adapter", then click Next.8. In the "The wizard is ready to install your hardware" window, click Next.9. In the "Completing the Add Hardware Wizard" window, click Finish.Then you need to continue to set the IP address, etc.10. Back in Control Panel, select the "Network and Internet" tab, click "View Network Status and Tasks".11. In the "View your basic network information and set up connections" window, click "Change adapter settings".12. Right-click the new adapter that has been added (find it in the list by checking the device name of "Microsoft KM-TEST Loopback Adapter"), and click Properties.   

    Read the article

  • Where Facebook Stands Heading Into 2013

    - by Mike Stiles
    In our last blog, we looked at how Twitter is positioned heading into 2013. Now it’s time to take a similar look at Facebook. 2012, for a time at least, seemed to be the era of Facebook-bashing. Between a far-from-smooth IPO, subsequent stock price declines, and anxiety over privacy, the top social network became a target for comedians, politicians, business journalists, and of course those who were prone to Facebook-bash even in the best of times. But amidst the “this is the end of Facebook” headlines, the company kept experimenting, kept testing, kept innovating, and pressing forward, committed as always to the user experience, while concurrently addressing monetization with greater urgency. Facebook enters 2013 with over 1 billion users around the world. Usage grew 41% in Brazil, Russia, Japan, South Korea and India in 2012. In the Middle East and North Africa, an average 21 new signups happen per minute. Engagement and time spent on the site would impress the harshest of critics. Facebook, while not bulletproof, has become such an integrated daily force in users’ lives, it’s getting hard to imagine any future mass rejection. You want to see a company recognizing weaknesses and shoring them up. Mobile was a weakness in 2012 as Facebook was one of many caught by surprise at the speed of user migration to mobile. But new mobile interfaces, better mobile ads, speed upgrades, standalone Messenger and Pages mobile apps, and the big dollar acquisition of Instagram, were a few indicators Facebook won’t play catch-up any more than it has to. As a user, the cool thing about Facebook is, it knows you. The uncool thing about Facebook is, it knows you. The company’s walking a delicate line between the public’s competing desires for customized experiences and privacy. While the company’s working to make privacy options clearer and easier, Facebook’s Paul Adams says data aggregation can move from acting on what a user is engaging with at the moment to a more holistic view of what they’re likely to want at any given time. To help learn about you, there’s Open Graph. Embedded through diverse partnerships, the idea is to surface what you’re doing and what you care about, and help you discover things via your friends’ activities. Facebook’s Director of Engineering, Mike Vernal, says building mobile social apps connected to Facebook in such ways is the next wave of big innovation. Expect to see that fostered in 2013. The Facebook site experience is always evolving. Some users like that about Facebook, others can’t wait to complain about it…on Facebook. The Facebook focal point, the News Feed, is not sacred and is seeing plenty of experimentation with the insertion of modules. From upcoming concerts, events, suggested Pages you might like, to aggregated “most shared” content from social reader apps, plenty could start popping up between those pictures of what your friends had for lunch.  As for which friends’ lunches you see, that’s a function of the mythic EdgeRank…which is also tinkered with. When Facebook changed it in September, Page admins saw reach go down and the high anxiety set in quickly. Engagement, however, held steady. The adjustment was about relevancy over reach. (And oh yeah, reach was something that could be charged for). Facebook wants users to see what they’re most likely to like, based on past usage and interactions. Adding to the “cream must rise to the top” philosophy, they’re now even trying out ordering post comments based on the engagement the comments get. Boy, it’s getting competitive out there for a social engager. Facebook has to make $$$. To do that, they must offer attractive vehicles to marketers. There are a myriad of ad units. But a key Facebook marketing concept is the Sponsored Story. It’s key because it encourages content that’s good, relevant, and performs well organically. If it is, marketing dollars can amplify it and extend its reach. Brands can expect the rollout of a search product and an ad network. That’s a big deal. It takes, as Open Graph does, the power of Facebook’s user data and carries it beyond the Facebook environment into the digital world at large. No one could target like Facebook can, and some analysts think it could double their roughly $5 billion revenue stream. As every potential revenue nook and cranny is explored, there are the users themselves. In addition to Gifts, Facebook thinks users might pay a few bucks to promote their own posts so more of their friends will see them. There’s also word classifieds could be purchased in News Feeds, though they won’t be called classifieds. And that’s where Facebook stands; a wildly popular destination, a part of our culture, with ever increasing functionalities, the biggest of big data, revenue strategies that appeal to marketers without souring the user experience, new challenges as a now public company, ongoing privacy concerns, and innovations that carry Facebook far beyond its own borders. Anyone care to write a “this is the end of Facebook” headline? @mikestilesPhoto via stock.schng

    Read the article

  • PASS: 2013 Summit Location

    - by Bill Graziano
    HQ recently posted a brief update on our search for a location for 2013.  It includes links to posts by four Board members and two community members. I’d like to add my thoughts to the mix and ask you a question.  But I can’t give you a real understanding without telling you some history first. So far we’ve had the Summit in Chicago, San Francisco, Orlando, Dallas, Denver and Seattle.  Each has a little different feel and distinct memories.  I enjoyed getting drinks by the pool in Orlando after the sessions ended.  I didn’t like that our location in Dallas was so far away from all the nightlife.  Denver was in downtown but we had real challenges with hotels.  I enjoyed the different locations.  I always enjoyed the announcement during the third keynote with the location of the next Summit. There are two big events that impacted my thinking on the Summit location.  The first was our transition to the new management company in early 2007.  The event that September in Denver was put on with a six month planning cycle by a brand new headquarters staff.  It wasn’t perfect but came off much better than I had dared to hope.  It also moved us out of the cookie cutter conferences that we used to do into a model where we have a lot more control.  I think you’ll all agree that the production values of our last few Summits have been fantastic.  That Summit also led to our changing relationship with Microsoft.  Microsoft holds two seats on the PASS Board.  All the PASS Board members face the same challenge: we all have full-time jobs and PASS comes in second place professionally (or sometimes further back).  Starting in 2008 we were assigned a liaison from Microsoft that had a much larger block of time to coordinate with us.  That changed everything between PASS and Microsoft.  Suddenly we were talking to product marketing, Microsoft PR, their event team, the Tech*Ed team, the education division, their user group team and their field sales team – locally and internationally.  We strengthened our relationship with CSS, SQLCAT and the engineering teams.  We had exposure at the executive level that we’d never had before.  And their level of participation at the Summit changed from under 100 people to 400-500 people.  I think those 400+ Microsoft employees have value at a conference on Microsoft SQL Server.  For the first time, Seattle had a real competitive advantage over other cities. I’m one that looked very hard at staying in Seattle for a long, long time.  I think those Microsoft engineers have value to our attendees.  I think the increased support that Microsoft can provide when we’re in Seattle has value to our attendees.  But that doesn’t tell the whole story.  There’s a significant (and vocal!) percentage of our membership that wants the Summit outside Seattle.  Post-2007 PASS doesn’t know what it’s like to have a Summit outside of Seattle.  I think until we have a Summit in another city we won’t really know the trade-offs. I think a model where we move every third or every other year is interesting.  But until we have another Summit outside Seattle and we can evaluate the logistics and how important it is to have depth and variety in our Microsoft participation we won’t really know. Another benefit that comes with a move is variety or diversity.  I learn more when I’m exposed to new things and new people.  I believe that moving the Summit will give a different set of people an opportunity to attend. Grant Fritchey writes “It seems that the board is leaning, extremely heavily, towards making it a permanent fixture in Seattle.”  I don’t believe that’s true.  I know there was discussion of that earlier but I don’t believe it’s true now. And that brings me to my question.  Do we announce the city now or do we wait until the 2012 Summit?  I’m happy to announce Seattle vs. not-Seattle as soon as we sign the contract.  But I’d like to leave the actual city announcement until the 2011 Summit.  I like the drama and mystery of it.  I also like that it doesn’t give you a reason to skip a Summit and wait for the next one if it’s closer or back in Seattle.  The other side of the coin is that your planning is easier if you know where it is.  What do you think?

    Read the article

  • Access Services in SharePoint Server 2010

    - by Wayne
    Another SharePoint Server 2010 feature which cannot go unnoticed is the Access Services. Access Services is a service in SharePoint Server 2010 that allows administrators to view, edit, and configure a Microsoft access application within a Web Browser. Access Services settings support backup and recovery, regardless of whether there is a UI setting in Central Administration. However, backup and recovery only apply to service-level and administrative-level settings; end-user content from the Access application is not backed up as part of this process. Access Services has Windows PowerShell functionality that can be used to provide the service that uses settings from a previous backup; configure and manage macro and query setting; manage and configure session management; and configure all the global settings of the service. Key Benefits of SharePoint Server Access Services Easier Access to right tools: The enhanced, customizable Ribbon in Access 2010 makes it easy to uncover more commands so you can focus on the end product. The new Microsoft Office BackstageTM view is yet another feature that can help you easily analyze and document your database, share, publish, and customize your Access 2010 experience, all from one convenient location. Helps build database effortlessly and quickly: Out-of-the box templates and reusable components make Access Services the fastest, simplest database solution available. It helps find new pre-built templates which you can start using without customization or select templates created by your peers in the Access online community and customize them to meet your needs. It builds your databases with new modular components. New Application Parts enable you to add a set of common Access components, such as a table and form for task management, to your database in a few simple clicks. Database navigation is now simplified. It creates Navigation Forms and makes your frequently used forms and reports more accessible without writing any code or logic. Create Impactful forms and reports: Whether it's an inventory of your assets or customer sales database, Access 2010 brings the innovative tools you'd expect from Microsoft Office. Access Services easily spot trends and add emphasis to your data. It quickly create coordinating database forms and reports and bring the Web into your database. Obtain a centralized landing pad for your data: Access 2010 offers easy ways to bring your data together and help increase work quality. New technologies help break down barriers so you can share and work together on your databases, making you or your team more efficient and productive. Add automation and complex expressions: If you need a more robust database design, such as preventing record deletion if a specific condition is met or if you need to create calculations to forecast your budget, Access 2010 empowers you to be your own developer. The enhanced Expression Builder greatly simplifies your expression building experience with IntelliSense®. With the revamped Macro Designer, it's now even easier for you to add basic logic to your database. New Data Macros allow you to attach logic to your data, centralizing the logic on the table, not the objects that update your data. Key features of Access Services 2010 - Access database content through a Web browser: Newly added Access Services on Microsoft SharePoint Server 2010 enables you to make your databases available on the Web with new Web databases. Users without an Access client can open Web forms and reports via a browser and changes are automatically synchronized. - Simplify how you access the features you need: The Ribbon, improved in Access 2010, helps you access commands even more quickly by enabling you to customize or create your own tabs. The new Microsoft Office Backstage view replaces the traditional File menu to provide one central, organized location for all of your document management tasks. - Codeless navigation: Use professional looking web-like navigation forms to make frequently used forms and reports more accessible without writing any code or logic. - Easily reuse Access items in other databases: Use Application Parts to add pre-built Access components for common tasks to your database in a few simple clicks. You can also package common database components, such as data entry forms and reports for task management, and reuse them across your organization or other databases. - Simplified formatting: By using Office themes you can create coordinating professional forms and reports across your database. Simply select a familiar and great looking Office theme, or design your own, and apply it to your database. Newly created Access objects will automatically match your chosen theme.

    Read the article

  • Java EE and GlassFish Server Roadmap Update

    - by John Clingan
    2013 has been a stellar year for both the Java EE and GlassFish Server communities. On June 12, Oracle and its partners announced the release of Java EE 7, which delivers on three major themes – HTML5, developer productivity, and meeting enterprise demands. The online event attracted over 10,000 views in the first two days! During the online event, Oracle also announced the availability of GlassFish Server Open Source Edition 4, the world's first Java EE 7 compatible application server. The primary role of GlassFish Server Open Source Edition has been, and continues to be, driving adoption of the latest release of the Java Platform, Enterprise Edition. Oracle also announced the Java EE 7 SDK, which bundles GlassFish Server Open Source Edition 4, as a Java EE 7 learning aid. Last, Oracle publicly announced the Java EE 7 reference implementation based on GlassFish Server Open Source Edition 4. Java EE is a popular platform, as evidenced by the 20+ Java EE 6 compatible implementations available to choose from. After the launch of Java EE 7 and GlassFish Server Open Source Edition 4, we began planning the Java EE 8 roadmap, which was covered during the JavaOne Strategy Keynote. To summarize, there is a lot of interest in improving on HTML5 support, Cloud, and investigating NoSQL support. We received a lot of great feedback from the community and customers on what they would like to see in Java EE 8. As we approached JavaOne 2013, we started planning the GlassFish Server roadmap. What we announced at JavaOne was that GlassFish Server Open Source Edition 4.1 is scheduled for 2014. Here is an update to that roadmap. GlassFish Server Open Source Edition 4.1 is scheduled for 2014 We are planning updates as needed to GlassFish Server Open Source Edition, which is commercially unsupported As we head towards Java EE 8: The trunk will eventually transition to GlassFish Server Open Source Edition 5 as a Java EE 8 implementation The Java EE 8 Reference Implementation will be derived from GlassFish Server Open Source Edition 5. This replicates what has been done in past Java EE and GlassFish Server releases. Oracle will no longer release future major releases of Oracle GlassFish Server with commercial support – specifically Oracle GlassFish Server 4.x with commercial Java EE 7 support will not be released. Commercial Java EE 7 support will be provided from WebLogic Server. Oracle GlassFish Server will not be releasing a 4.x commercial version Expanding on that last bullet, new and existing Oracle GlassFish Server 2.1.x and 3.1.x commercial customers will continue to be supported according to the Oracle Lifetime Support Policy. Oracle recommends that existing commercial Oracle GlassFish Server customers begin planning to move to Oracle WebLogic Server, which is a natural technical and license migration path forward: Applications developed to Java EE standards can be deployed to both GlassFish Server and Oracle WebLogic Server GlassFish Server and Oracle WebLogic Server have implementation-specific deployment descriptor interoperability (here and here). GlassFish Server 3.x and Oracle WebLogic Server share quite a bit of code, so there are quite a bit of configuration and (extended) feature similarities. Shared code includes JPA, JAX-RS, WebSockets (pre JSR 356 in both cases), CDI, Bean Validation, JAX-WS, JAXB, and WS-AT. Both Oracle GlassFish Server 3.x and Oracle WebLogic Server 12c support Oracle Access Manager, Oracle Coherence, Oracle Directory Server, Oracle Virtual Directory, Oracle Database, Oracle Enterprise Manager and are entitled to support for the underlying Oracle JDK. To summarize, Oracle is committed to the future of Java EE.  Java EE 7 has been released and planning for Java EE 8 has begun. GlassFish Server Open Source Edition continues to be the strategic foundation for Java EE reference implementation going forward. And for developers, updates will be delivered as needed to continue to deliver a great developer experience for GlassFish Server Open Source Edition. We are planning for GlassFish Server Open Source Edition 5 as the foundation for the Java EE 8 reference implementation, as well as bundling GlassFish Server Open Source Edition 5 in a Java EE 8 SDK, which is the most popular distribution of GlassFish. This will allow GlassFish releases to be more focused on the Java EE platform and community-driven requirements. We continue to encourage community contributions, bug reports, participation on the GlassFish forum, etc. Going forward, Oracle WebLogic Server will be the single strategic commercially supported application server from Oracle. Disclaimer: The preceding is intended to outline our general product direction. It is intended for information purposes only, and may not be incorporated into any contract.It is not a commitment to deliver any material, code, or functionality, and should not be relied upon in making purchasing decisions. The development, release, and timing of any features or functionality described for Oracle’s products remains at the sole discretion of Oracle.

    Read the article

  • Source Control and SQL Development &ndash; Part 3

    - by Ajarn Mark Caldwell
    In parts one and two of this series, I have been specifically focusing on the latest version of SQL Source Control by Red Gate Software.  But I have been doing source-controlled SQL development for years, long before this product was available, and well before Microsoft came out with Database Projects for Visual Studio.  “So, how does that work?” you may wonder.  Well, let me share some of the details of how we do it where I work… The key to this approach is that everything is done via Transact-SQL script files; either natively written T-SQL, or generated.  My preference is to write all my code by hand, which forces you to become better at your SQL syntax.  But if you really prefer to use the Management Studio GUI to make database changes, you can still do that, and then you use the Generate Scripts feature of the GUI to produce T-SQL scripts afterwards, and store those in your source control system.  You can generate scripts for things like stored procedures and views by right-clicking on the database in the Object Explorer, and Choosing Tasks, Generate Scripts (see figure 1 to the left).  You can also do that for the CREATE scripts for tables, but that does not work when you have a table that is already in production, and you need to make just a simple change, such as adding a new column or index.  In this case, you can use the GUI to make the table changes, and then instead of clicking the Save button, click the Generate Change Script button (). Then, once you have saved the change script, go ahead and execute it on your development database to actually make the change.  I believe that it is important to actually execute the script rather than just click the Save button because this is your first test that your change script is working and you didn’t somehow lose a portion of the change. As you can imagine, all this generating of scripts can get tedious and tempting to skip entirely, so again, I would encourage you to just get in the habit of writing your own Transact-SQL code, and then it is just a matter of remembering to save your work, just like you are in the habit of saving changes to a Word or Excel document before you exit the program. So, now that you have all of these script files, what do you do with them?  Well, we organize ours into folders labeled ChangeScripts, Functions, Views, and StoredProcedures, and those folders are loaded into our source control system.  ChangeScripts contains all of the table and index changes, and anything else that is basically a one-time-only execution.  Of course you want to write your scripts with qualifying logic so that if a script were accidentally run more than once in a database, it would not crash nor corrupt anything; but these scripts are really intended to be run only once in a database. Once you have your initial set of scripts loaded into source control, then making changes, such as altering a stored procedure becomes a simple matter of checking out your CREATE PROCEDURE* script, editing it in SSMS, saving the change, executing the script in order to effect the change in your database, and then checking the script back in to source control.  Of course, this is where the lack of integration for source control systems within SSMS becomes an irritation, because this means that in addition to SSMS, I also have my source control client application running to do the check-out and check-in.  And when you have 800+ procedures like we do, that can be quite tedious to locate the procedure I want to change in source control, check it out, then locate the script file in my working folder, open it in SSMS, do the change, save it, and the go back to source control to check in.  Granted, it is not nearly as burdensome as, say, losing your source code and having to rebuild it from memory, or losing the audit trail that good source control systems provide.  It is worth the effort, and this is how I have been doing development for the last several years. Remember that everything that the SQL Server Management Studio does in modifying your database can also be done in plain Transact-SQL code, and this is what you are storing.  And now I have shown you how you can do it all without spending any extra money.  You already have source control, or can get free, open-source source control systems (almost seems like an oxymoron, doesn’t it) and of course Management Studio is free with your SQL Server database engine software. So, whether you spend the money on tools to make it easier, or not, you now have no excuse for not using source control with your SQL development. * In our current model, the scripts for stored procedures and similar database objects are written with an IF EXISTS…DROP… at the top, followed by the CREATE PROCEDURE… section, and that followed by a section that assigns permissions.  This allows me to run the same script regardless of whether the procedure previously existed in the database.  If the script was only an ALTER PROCEDURE, then it would fail the first time that procedure was deployed to a database, unless you wrote other code to stub it if it did not exist.  There are a few different ways you could organize your scripts for deployment, each with its own trade-offs, but I think it is absolutely critical that whichever way you organize things, you ensure that the same script is run throughout the deployment cycle, and do not allow customizations to creep in between TEST and PROD.  If you do, then you have broken the integrity of your deployment process because what you deployed to PROD was not exactly the same as what was tested in TEST, so you effectively have now released untested code into PROD.

    Read the article

  • obiee 10g teradata Solaris deployment

    - by user554629
    I have 3-4 years worth of notes on proper Teradata deployment across multiple operating systems.   The topic that is too large to cover succinctly in a blog entry.   I'm trying something new:  document a specific situation, consolidate the facts, document diagnostic procedures and then clone the structure to cover other obiee deployments (11g and other operating systems). Until the icon below is removed, this blog entry may be revised frequently.  No construction between June 6th through June 25th. Getting started obiee 10g certification:  pg 24-25 Teradata V2R5.1.x - V2R6.2, Client 13.10, certified 10.1.3.4.1obiee 10g documentation: Deployment Guide, Server Administration, Install/Config Guideobiee overview: teradata connectivity downloads: ( requires registration )solaris odbc drivers: sparc 13.10:  Choose 13.10.00.04  ( ReadMe ) sparc 14.00: probably would work, but not certified by Oracle on 10g I assume you have obiee 10.1.3.4.1 installed; 10.1.3.4.2 would be a better choice. Teradata odbc install requires root for Solaris pkgadd Only 1 version of Teradata odbc can be installed.symbolic links to the current version are created in /usr/lib at install obiee implementation background database access has two types of implementation:  native and odbcnative drivers use DB vendor client interfaces for accessodbc drivers are provided by the DB vendor for DB accessTeradata is an odbc interface Database. odbc drivers require an ODBC Driver Managerobiee uses Merant Data Direct driver manager obiee servers communicate with one another using odbc.The internal odbc driver is implemented by the obiee team and requires Merant Driver Manager. Teradata supplies a Driver Manager, which is built by Merant, but should not be used in obiee. The nqsserver shared library deployment looks like this  OBIEE Server<->DataDirect Manager<->Teradata Driver<->Teradata Database nqsserver startup $ cd $BI/setup$ . ./sa-init64.sh$ run-sa.sh autorestart64 The following files are referenced from setup:  .variant.sh  user.sh  NQSConfig.INI  DBFeatures.INI  $ODBCINI ( odbc.ini )  sqlnet.ora How does nqsserver connect to Teradata? A teradata DSN is created in the RPD. ( TD71 )setup/odbc.ini contains: [ODBC Data Sources] TD71=tdata.so[TD71]Driver=/opt/tdodbc/odbc/drivers/tdata.soDescription=Teradata V7.1.0DBCName=###.##.##.### LastUser=Username=northwindPassword=northwindDatabase=DefaultDatabase=northwind setup/user.sh contains LIBPATH\=/opt/tdicu/lib_64\:/usr/odbc/lib\:/usr/odbc/drivers\:/usr/lpp/tdodbc/odbc/drivers\:$LIBPATHexport LIBPATH   setup/.variant.sh contains if [ "$ANA_SERVER_64" = "1" ]; then  ANA_BIN_DIR=${SAROOTDIR}/server/Bin64  ANA_WEB_DIR=${SAROOTDIR}/web/bin64  ANA_ODBC_DIR=${SAROOTDIR}/odbc/lib64         setup/sa-run.sh  contains . ${ANA_INSTALL_DIR}/setup/.variant.sh. ${ANA_INSTALL_DIR}/setup/user.sh logfile="${SAROOTDIR}/server/Log/nqsserver.out.log"${ANA_BIN_DIR}/nqsserver -quiet >> ${logfile} 2>&1 &   nqsserver is running: nqsserver produces $BI/server/nqsserver.logAt startup, the native database drivers connect and record DB versions.tdata.so is not loaded until a Teradata DB connection is attempted.    Teradata odbc client installation Accept all the defaults for pkgadd.   Install in /opt. $ mkdir odbc$ cd odbc$ gzip -dc ../tdodbc__solaris_sparc.13.10.00.04.tar.gz | tar -xf - $ sudo su# pkgadd -d . TeraGSS# pkgadd -d . tdicu1310# pkgadd -d . tdodbc1310   Directory Notes: /opt/teradata/client/13.10/odbc_64/lib/tdata.soThe 64-bit obiee library loaded by nqsserver. /opt/teradata/client/13.10/odbc_64/lib is not needed in LD_LIBRARY_PATH /opt/teradata/client/13.10/tdicu/lib64is needed in LD_LIBRARY_PATH /usr/odbc should not be referenced;  it is a link to 32-bit libraries LD_LIBRARY_PATH_64 should not be used.     Useful bash functions and aliases export SAROOTDIR=/export/home/dw_adm/OracleBIexport TERA_HOME=/opt/teradata/client/13.10 export ORACLE_HOME=/export/home/oracle/product/10.2.0/clientexport ODBCINI=$SAROOTDIR/setup/odbc.iniexport TD_ICU_DATA=$TERA_HOME/tdicu/lib64alias cds="alias | grep '^alias cd' | sed 's/^alias //' | sort"alias cdtd="cd $TERA_HOME; ls" alias cdtdodbc="cd $TERA_HOME/odbc_64; ls -l"alias cdtdicu="cd $TERA_HOME/tdicu/lib64; ls -l"alias cdbi="cd $SAROOTDIR; ls"alias cdbiodbc="cd $SAROOTDIR/odbc; ls -l"alias cdsetup="cd $SAROOTDIR/setup; ls -ltr"alias cdsvr="cd $SAROOTDIR/server; ls"alias cdrep="cd $SAROOTDIR/server/Repository; ls -ltr"alias cdsvrcfg="cd $SAROOTDIR/server/Config; ls -ltr"alias cdsvrlog="cd $SAROOTDIR/server/Log; ls -ltr"alias cdweb="cd $SAROOTDIR/web; ls"alias cdwebconfig="cd $SAROOTDIR/web/config; ls -ltr"alias cdoci="cd $ORACLE_HOME; ls"pkgfiles() { pkgchk -l $1 | awk  '/^Pathname/ {print $2}'; }pkgfind()  { pkginfo | egrep -i $1 ; } Examples: $ pkgfind td$ pkgfiles tdodbc1310 | grep 64$ cds$ cdtdodbc$ cdsetup$ cdsvrlog$ cdweblog

    Read the article

  • WPF Databinding- Part 2 of 3

    - by Shervin Shakibi
    This is a follow up to my previous post WPF Databinding- Not your fathers databinding Part 1-3 you can download the source code here  http://ssccinc.com/wpfdatabinding.zip Example 04   In this example we demonstrate  the use of default properties and also binding to an instant of an object which is part of a collection bound to its container. this is actually not as complicated as it sounds. First of all, lets take a look at our Employee class notice we have overridden the ToString method, which will return employees First name , last name and employee number in parentheses, public override string ToString()        {            return String.Format("{0} {1} ({2})", FirstName, LastName, EmployeeNumber);        }   in our XAML we have set the itemsource of the list box to just  “Binding” and the Grid that contains it, has its DataContext set to a collection of our Employee objects. DataContext="{StaticResource myEmployeeList}"> ….. <ListBox Name="employeeListBox"  ItemsSource="{Binding }" Grid.Row="0" /> the ToString in the method for each instance will get executed and the following is a result of it. if we did not have a ToString the list box would look  like this: now lets take a look at the grid that will display the details when someone clicks on an Item, the Grid has the following DataContext DataContext="{Binding ElementName=employeeListBox,            Path=SelectedItem}"> Which means its bound to a specific instance of the Employee object. and within the gird we have textboxes that are bound to different Properties of our class. <TextBox Grid.Row="0" Grid.Column="1" Text="{Binding Path=FirstName}" /> <TextBox Grid.Row="1" Grid.Column="1" Text="{Binding Path=LastName}" /> <TextBox Grid.Row="2" Grid.Column="1" Text="{Binding Path=Title}" /> <TextBox Grid.Row="3" Grid.Column="1" Text="{Binding Path=Department}" />   Example 05   This project demonstrates use of the ObservableCollection and INotifyPropertyChanged interface. Lets take a look at Employee.cs first, notice it implements the INotifyPropertyChanged interface now scroll down and notice for each setter there is a call to the OnPropertyChanged method, which basically will will fire up the event notifying to the value of that specific property has been changed. Next EmployeeList.cs notice it is an ObservableCollection . Go ahead and set the start up project to example 05 and then run. Click on Add a new employee and the new employee should appear in the list box.   Example 06   This is a great example of IValueConverter its actuall a two for one deal, like most of my presentation demos I found this by “Binging” ( formerly known as g---ing) unfortunately now I can’t find the original author to give him  the credit he/she deserves. Before we look at the code lets run the app and look at the finished product, put in 0 in Celsius  and you should see Fahrenheit textbox displaying to 32 degrees, I know this is calculating correctly from my elementary school science class , also note the color changed to blue, now put in 100 in Celsius which should give us 212 Fahrenheit but now the color is red indicating it is hot, and finally put in 75 Fahrenheit and you should see 23.88 for Celsius and the color now should be black. Basically IValueConverter allows us different types to be bound, I’m sure you have had problems in the past trying to bind to Date values . First look at FahrenheitToCelciusConverter.cs first notice it implements IValueConverter. IValueConverter has two methods Convert and ConvertBack. In each method we have the code for converting Fahrenheit to Celsius and vice Versa. In our XAML, after we set a reference in our Windows.Resources section. and for txtCelsius we set the path to TxtFahrenheit and the converter to an instance our FahrenheitToCelciusConverter converter. no need to repeat this for TxtFahrenheit since we have a convert and ConvertBack. Text="{Binding  UpdateSourceTrigger=PropertyChanged,            Path=Text,ElementName=txtFahrenheit,            Converter={StaticResource myTemperatureConverter}}" As mentioned earlier this is a twofer Demo, in the second demo, we basically are converting a double datatype to a brush. Lets take a look at TemperatureToColorConverter, notice we in our Covert Method, if the value is less than our cold temperature threshold we return a blue brush and if it is higher than our hot temperature threshold we return a redbrush. since we don’t have to convert a brush to double value in our example the convert back is not being implemented. Take time and go through these three examples and I hope you have a better understanding   of databinding, ObservableCollection  and IValueConverter . Next blog posting we will talk about ValidationRule, DataTemplates and DataTemplate triggers.

    Read the article

  • Customer Engagement: Are Your Customers Engaged With Your Brands?

    - by Michael Snow
    Engaging Customers is Critical for Business Growth This week we'll be spending some time looking at Customer Engagement. We all have stories about how we try to engage our customers better than ever before.  We all know that successfully engaging customers is critical to an organization’s business success. We also know that engaging our customers is more challenging today than ever before. There is so much noise to compete with for getting anyone's attention. Over the last decade and a half we’ve watched as the online channel became a primary one for conducting our business and even managing our lives. And during this whole process or evolution, the customer journey has grown increasingly complex. Customers themselves have assumed increasing power and influence over the purchase process and for setting the tone and pace of the relationships they have with brands and you see the evidence of this in the really high expectations that customers have today. They expect brand experiences that are personalized and relevant -- In other words they want experiences that demonstrate that the brand understands their interests, preferences and past interactions with them. They also expect their experience with a brand and the community surrounding it to be social and interactive – it’s no longer acceptable to have a static, one-way dialogue with your customer base or to fail to connect your customers with fellow customers, or with your employees and partners. And on top of all this, customers expect us to deliver this rich and engaging, personalized and interactive experience, in a consistent way across a variety of channels including web, mobile and social channels or even offline venues such as in-store or via a call center. And as a result, we see that delivery on these expectations and successfully engaging your customers is a great challenge today. Customers expect a personal, engaging and consistent online customer experience. Today’s consumer expects to engage with your brand and the community surrounding it in an interactive and social way. Customers have come to expect a lot for the online customer experience.  ·        They expect it to be personal: o   Accessible:  - Regardless of my device  Via my existing online identities  o   Relevant:  Content that interests me  o   Customized:  To be able to tailor my online experience  ·        They expect it to be engaging: o   Social:  So I can share content with my social networks  o   Intuitive:  To easily find what I need   o   Interactive:  So I can interact with online communities And they expect it to be consistent across the online experience – so you better have your brand and information ducks in a row. These expectations are not only limited to your customers by any means. Your employees (and partners) are also expecting to be empowered with engagement tools across their internal and external communications and interactions with customers, partners and other employees. We had a great conversation with Ted Schadler from Forrester Research entitled: "Mobile is the New Face of Engagement" that is now available On-Demand. Take a look at all the webcasts available to watch from our Social Business Thought Leader Series. Social capabilities have become so pervasive and changed customers’ expectations for their online experiences. The days of one-direction communication with customers are at an end. Today’s customers expect to engage in a dialogue with your brand and the community surrounding it in an interactive and social way. You have at a very short window of opportunity to engage a customer before they go to another site in their pursuit of information, product, or services. In fact, customers who engage with brands via social media tend to spend more that customers who don’t, between 20% and 40% more.  And your customers are also increasingly influenced by their social networks too – 40% of consumers say they factor in Facebook recommendations when making purchasing decisions.  This means a few different things for today’s businesses. Incorporating forms of social interaction such as commenting or reviews as well as tightly integrating your online experience with your customers’ social networking experiences into the online customer experience are crucial for maintaining the eyeballs on your desired pages. --- Notes/Sources: 93% - Cone Finds that Americans Expect Companies to Have a Presence in Social Media - http://www.coneinc.com/content1182 40% of consumers factor in Facebook recommendations when making decisions about purchasing (Increasing Campaign Effectiveness with Social Media, Syncapse, March 2011) 20%-40% - Customers who engage with a company via social media spend this percentage more with that company than other customers (Source: Bain & Company Report – Putting Social Media to Work)

    Read the article

  • Sound issues after trying everything

    - by Lerp
    I cannot get my sound working properly, no matter what I do, there's always some problem. It's very annoying as it's the only thing preventing me from making Ubuntu my main OS. At the moment my sound always plays through both my speakers and my headphones regardless except the sound through the headphones is crackly. It is also a bit quiet even though everything is maxed. I've managed to improve the situation to a point where the sound out of my speakers is perfect but I have none at all from my headphones. I do have two connectors listed in the sound settings but regardless of which one is selected it always plays through the speakers. I think this might have something to do with the fact that my speakers are plugging into the front of my computer, typically the headphone jack, and my headphones are plugging into the back but when I try disconnecting the speakers from the front there is still no sound from the headphones. I fixed the speaker sound by going through the sound settings and making sure they were all set to 100% then rebooting. Things I have tried: Maxing everything and unmuting everything in alsamixer Uninstalling pulseaudio Making gstreamer use only alsa via gstreamer-properties. This worked with the sound test button including independent sound between headphones and speakers but when I reset the computer it no longer worked. So I tried setting it manually in gconf-editor which didn't work either. Reinstalling alsa and pulseaudio Setting the model in /etc/modprobe.d/alsa-base.conf to 6stack and 6stack-dig neither worked. Upgrading to 12.10 Here's some command output to help you diagnose my problem. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: AD198x Headphone [AD198x Headphone] Subdevices: 1/1 Subdevice #0: subdevice #0 sudo lshw -C sound *-multimedia description: Audio device product: 82801JI (ICH10 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:70 memory:f7ff8000-f7ffbfff cat /proc/asound/card*/codec* | grep "Codec" Codec: Analog Devices AD1989B cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 options snd-hda-intel model=6stack

    Read the article

  • HP Pavilion tx2000 - Wifi adapter no longer works after moving from 12.04 to a 12.10 clean install

    - by Marek L.
    I have a HP Pavilion tx2000 that I have been running Ubuntu 12.04 on for a couple of months without any problems (wifi worked great) until yesterday when my hard drive failed. I replaced the hard drive and decided to install Ubuntu 12.10. Unlike 12.04, the wifi did not work after the installation finished and all the updates where installed (over Ethernet). The network drop down in the top right didn't even show a wireless option. I Googled about for a bit and found some solutions that seemed like they might work. Unfortunately they did not. Here is what I tried: sudo apt-get remove bcmwl-kernel-source sudo apt-get install b43-fwcutter sudo apt-get install firmware-b43-lpphy-installer Restart the computer. And the wifi still didn't work. At which point I panicked a bit and tried to undo the previous commands by running: sudo apt-get remove b43-fwcutter firmware-b43-lpphy-installer sudo apt-get install bcmwl-kernel-source Restart the computer. The wifi still doesn't work. This is where I stopped because I have no idea what I am doing and don't want to mess something up. The network drop down still doesn't show a wireless option and the hardware wifi switch on the laptop is amber (it turns blue when the wifi is on). Using the hardware switch does not change the color. Output from: sudo lspci ... 08:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01) ... Output from: sudo lshw -class network *-network UNCLAIMED description: Network controller product: BCM4322 802.11a/b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1100000-d1103fff ... Output from: sudo rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes UPDATE: After writing up this question tried the following command: sudo rfkill unblock all At first it didn't do anything but after running it about four times, sudo rfkill list all now returns: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no But the network menu still does not have a wireless option and the hardware switch still glows amber. Pushing the hardware switch turns the hard block back on and I have to run sudo rfkill unblock all multiple times again to turn it off. Any help is appreciated! Update 2: Full output from sudo lspci -nn: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605] 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3a) 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304] 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] [1002:9612] 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)

    Read the article

  • Can Kind People Finish First?

    - by Oracle Accelerate for Midsize Companies
    by Jim Lein, Oracle Midsize Programs In an earlier post, I expressed my undying love for KIND Snacks' products. This month's Oracle Profit magazine features an interview with KIND Healthy Snacks Founder and CEO Daniel Lubetzky entitled "Better Business". Lubetzky expresses his vision for making KIND a "not for profit only" company.  All great companies start with a good idea. In this case, that one great idea was to offer a healthy snack with ingredients you can "see and pronounce". That's one of things I really like about this company--that coupled with the fact that their snacks taste great. They compete in an over crowded playing field but I've found that it's rare to find an energy snack that both tastes good and is good for you.  A couple of interesting facts I learned from reading this article: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} 9 out of 10 consumers who try a KIND bar will purchase a KIND product again and recommend it to others KIND has the highest Net Promoter Score among the top 10 brands in the nutritional bar category (I confess I've never heard about this rating before but now that I have it's pretty cool) KIND's coporate mantra, "Do the Kind Thing" both encourages people to do random acts of kindness and provides easy mechanisms for doing so. Not coincidentally, I think, KIND is indeed a story about how nice guys can finish first. KIND has doubled in size every year for the last ten  years and now employees over 300 people, with sales exceeding $120M annually. Growth Applies Pressures One thing I know for certain from interacting our with fast growing customers over the last fifteen years is that growth applies myriad pressures across the organization--resources, processes, technology systems, and leadership agility. And it's easy to forget that Oracle was once an entrepreneurial startup and experienced all those same pressures that other growing companies are experiencing today. When asked by Profit Editor in Chief Aaron Lazenby, " What sort of pressure does KIND"s growth and success place on operations?", Lubetzky responded, "We have a demand planning process right now that is manual to a significant extent, and it just takes so much management time. It takes us days and sometimes weeks to produce information that is critical to our business—and by the time we get the results, we need revised data. Our sales leadership could go out selling, but instead they’re talking to our team about forecasts." Hitching Your Wagon to Oracle Lubetzky and his team selected Oracle for what I believe is our company's greatest strength: hitch your wagon to Oracle and you can trust that we will be there for the long run with the solutions you need and financial staying power. In Lubetzky's words, "The KIND philosophy requires you to have a long-term view of things; taking shortcuts may be the fastest way to get things done, but in the long term that can come back and bite you. Oracle is the type of company—and has the kind of platform—that is here for the long term. It’s not going to go away tomorrow. And Oracle is going to invest all the necessary resources into staying ahead of the game and improving." o next time you're in the supermarket or an REI (my favorite store in the world) or any of the other 80,000 locations that carry KIND, give one a try. Maybe some day you'll want to become a KIND Brand Ambassador.   Looking for more news and information about Oracle Solutions for Midsize Companies? Read the latest Oracle for Midsize Companies Newsletter Sign-up to receive the latest communications from Oracle’s industry leaders and experts Jim Lein I evangelize Oracle's enterprise solutions for growing midsize companies. I recently celebrated 15 years with Oracle, having joined JD Edwards in 1999. I'm based in Evergreen, Colorado and love relating stories about creativity and innovation whether they be about software, live music, or the mountains. The views expressed here are my own, and not necessarily those of Oracle.

    Read the article

  • Caveat utilitor - Can I run two versions of Microsoft Project side-by-side?

    - by Martin Hinshelwood
    A number of out customers have asked if there are any problems in installing and running multiple versions of Microsoft Project on a single client. Although this is a case of Caveat utilitor (Let the user beware), as long as the user understands and accepts the issues that can occur then they can do this. Although Microsoft provide the ability to leave old versions of Office products (except Outlook) on your client when you are installing a new version of the product they certainly do not endorse doing so. Figure: For Project you can choose to keep the old stuff   That being the case I would have preferred that they put a “(NOT RECOMMENDED)” after the options to impart that knowledge to the rest of us, but they did not. The default and recommended behaviour is for the newer version installer to remove the older versions. Of course this does not apply in the revers. There are no forward compatibility packs for Office. There are a number of negative behaviours (or bugs) that can occur in this configuration: There is only one MS Project In Windows a file extension can only be associated with a single program.  In this case, MPP files can be associated with only one version of winproj.exe.  The executables are in different folders so if a user double-clicks a Project file on the desktop, file explorer, or Outlook email, Windows will launch the winproj.exe associated with MPP and then load the MPP file.  There are problems associated with this situation and in some cases workarounds. The user double-clicks on a Project 2010 file, Project 2007 launches but is unable to open the file because it is a newer version.  The workaround is for the user to launch Project 2010 from the Start menu then open the file.  If the file is attached to an email they will need to first drag the file to the desktop. All your linked MS Project files need to be of the same version There are a number of problems that occur when people use on Microsoft’s Object Linking and Embedding (OLE) technology.  The three common uses of OLE are: for inserted projects where a Master project contains sub-projects and each sub-project resides in its own MPP file shared resource pools where multiple MPP files share a common resource pool kept in a single MPP file cross-project links where a task or milestone in one MPP file has a  predecessor/successor relationship with a task or milestone in a different MPP file What I’ve seen happen before is that if you are running in a version of Project that is not associated with the MPP extension and then try and activate an OLE link then Project tries to launch the other version of Project.  Things start getting very confused since different MPP files are being controlled by different versions of Project running at the same time.  I haven’t tried this in awhile so I can’t give you exact symptoms but I suspect that if Project 2010 is involved the symptoms will be different then in a Project 2003/2007 scenario.  I’ve noticed that Project 2010 gives different error messages for the exact same problem when it occurs in Project 2003 or 2007.  -Anonymous The recommendation would be either not to use this feature if you have to have multiple versions of Project installed or to use only a single version of Project. You may get unexpected negative behaviours if you are using shared resource pools or resource pools even when you are not running multiple versions as I have found that they can get broken very easily. If you need these thing then it is probably best to use Project Server as it was created to solve many of these specific issues. Note: I would not even allow multiple people to access a network copy of a Project file because of the way Windows locks files in write mode. This can cause write-locks that get so bad a server restart is required I’ve seen user’s files get write-locked to the point where the only resolution is to reboot the server. Changing the default version to run for an extension So what if you want to change the default association from Project 2007 to Project 2010?   Figure: “Control Panel | Folder Options | Change the file associated with a file extension” Windows normally only lists the last version installed for a particular extension. You can select a specific version by selecting the program you want to change and clicking “Change program… | Browse…” and then selecting the .exe you want to use on the file system. Figure: You will need to select the exact version of “winproj.exe” that you want to run Conclusion Although it is possible to run multiple versions of Project on one system in the main it does not really make sense.

    Read the article

  • Oracle GoldenGate 12c - Leading Enterprise Replication

    - by Doug Reid
    Oracle GoldenGate 12c released  on October 17th and includes several new cutting edge features that firmly establishes GoldenGate's leader position in the data replication space.   In fact, this release more than doubles the performance of data delivery, supports Oracle's new multitenant database feature,  it's more secure, has more options for high availability, and has made great strides to simplify the configuration and deployment of the product.     Read through the press release if you haven't already and do not miss the quote from Cern's Eva Dafonte Perez, regarding Oracle GoldenGate 12c "….performs five times faster compared to previous GoldenGate versions and simplifies the management of a multi-tier environment" There are a variety of new and improved features in the Oracle GoldenGate 12c.  Here are the highlights: Optimized for Oracle Database 12c -  GoldenGate 12c is custom tailored to the unique capabilities of Oracle database 12c and out of the box GoldenGate 12c supports multitenant (pluggable database (PDB)) and non-consolidated deployments of Oracle Database 12c.   The naming convention used by database 12c is now in three parts (PDB-name, schema-name, and object name).  We have made changes to the GoldenGate capture process to support the new naming convention and streamlined the whole process so a single GoldenGate capture process is being used at the container level rather than at each individual PDB.  By having the capture process at the container level resource usage and the number of processes are reduced. To view a conceptual architecture diagram click here. Integrated Delivery for the Oracle Database - Leveraging a lightweight streaming API built exclusively for Oracle GoldenGate 12c, this process distributes load, auto tunes the degree of parallelism, scales better, and delivers blinding rates of changed data delivery to the Oracle database.  One of the goals for Oracle GoldenGate 12c was to reduce IT costs by simplifying the configuration and reduce the time to manage complex infrastructures.  In previous versions of Oracle GoldenGate, customers would split transaction loads by grouping tables into multiple different delivery processes (click here to view the previous method). Each delivery process executed independently and without any interaction or knowledge of other delivery processes.  This setup was complicated to configure and time consuming as the developer needed in-depth knowledge of the source and target schemas and the transaction profile. With GoldenGate 12c and Integrated Delivery we have made it easier to configure and faster to deploy.  To view a conceptual architecture diagram of integrated delivery click here Coordinated Delivery for Non-Oracle Databases - Coordinated Delivery orchestrates high-speed apply processes and simplifies the configuration of GoldenGate for non-Oracle targets. In Oracle GoldenGate 12c a single delivery process is used with multiple threads (click here) and key events, such as primary key updates, event markers, DDL, etc, are coordinated between the various threads to insure that the transactions are applied in the same sequence as they were captured, all while delivery improved performance.  Replication Between On-Premises and Cloud-Based systems. - The trend for business to utilize both on-premises and cloud-based systems is rising and businesses need to replicate data back and forth.   GoldenGate 12c can be configured in a variety of ways to provide real-time replication when unrestricted or restricted (limited ports or HTTP tunneling) networks are between on-premises and cloud-based systems.    Expanded Heterogeneity - It wouldn't be a GoldenGate release without new and improved platform support.   Release 1 includes support for MySQL 5.6 and Sybase 15.7.   Upcoming in the next release GoldenGate, support will be expanded for MS SQL Server, DB2, and Teradata. Tighter Security - Oracle GoldenGate 12c is integrated with the Oracle wallet to shield usernames and passwords using strong encryption and aliases.   Customers accustomed to using the Oracle Wallet with other Oracle products will instantly be familiar with how to use this great new feature Expanded Oracle Application and Technology Support -   GoldenGate can be used along with Oracle Coherence to enable real-time changed data feeds to the Coherence cache using Toplink and the Oracle GoldenGate JMS adapter.     Plus,  Oracle Advanced Customer Services (ACS) now offers a low downtime E-Business Suite platform and database migrations using GoldenGate as the enabling technology.  Keep tuned for more blogs on the new features and the upcoming launch webcast where we will go into these new features in more detail.   In the mean time make sure to read through our white paper "Oracle GoldenGate 12c Release 1 New Features Overview"

    Read the article

  • Many Different Things Rolled into a Ball

    - by MOSSLover
    Yeah I know I don’t blog much anymore, because life has taken me places that don’t involve the interwebs unfortunately.  I am in the midst of planning two events, starting a non for profit, creating more sessions for various conferences, submitting to various conferences, working a 40 hour a week job, attempting to hang out with boyfriend/friends/family.  So you can see that list does not include this blog sadly that’s how it goes sometimes.  The bottom piece very important over any of the top pieces.  I haven’t seen St. Louis in a while and I get to go back.  I was gone from home for MVP Summit and Best Practices Conference, so the boyfriend and cat didn’t get to see me either for a bit.  Then you have to add in the whole toilet being broken fiasco this week.  Maintenance really thought it would be cool to turn off the ability to flush.  I mean who does that?  Then when we call the owner he comes by turns it on and we figure it was an accident, because well the next day no one came by to tell us there was a leak.  It was all kinds of strangeness and involved me running to other people’s toilets.  As Dan Usher would say, I was a sad panda for a few days.  So I guess I wanted to post a few thoughts here just because I can.  I do not like multiple content editor webparts embedded with html files in numerous pages doing the same thing.  I will tell you why I don’t like these particular webparts and the way they are being used.  First off if you have a bunch of pages with script includes it’s about time you should just dump them into the masterpage.  Why bother finding all 20 pages and changing those pages when you can just use a single masterpage that already exists? The other thing that is bothering me days is screen scraping.  Just don’t do it, because in 2010 you will find the UI is substantially slower.  I understand you are new and you have no idea what to do.  You are also using 2007 am I right?  So then you need to go to codeplex.com and type in a search for SPServices.  Download it, use it, love it and then have it’s babies (well maybe don’t go so far this is not the GRID in Tron). If you have a ton of constants in your code why did you not go in and create a webpart with a bunch of properties and/or link to a configuration list hidden in the browser?  This type of property and list could help you out in the long run.  The power users and administrators can now change the control without you having to compile it over and over again.  It’s good stuff.  Also, you can change the control without compiling it, especially in 2007 where you have to do a farm solution.  In 2010 you can do a sandbox solution I guess, but shouldn’t you make it as easy and supportable as possible for other users? In conclusion I’m an angry person when it comes to viewing something repeatedly and analyzing it in a system.  Now we will move on to the next topic…MVP Summit…So yeah I can’t really talk about particulars, but I can talk about my experience as a person.  Don’t build something up to be cooler than it is only to be dropped from your 10,000 foot perch.  My experience was great, but the content overall was something to be desired.  It’s ok I got to meet a lot of people I would not have met if I had not gone.  Some of it was surreal, such as product group members showing up and talking to us.  It was pretty neat.  Plus I never had the chance to get to that mythical MS Office in Redmond.  Prior to Summit it was like Rainbow Brites unicorn trying taunting me on television when I was a kid.  So I guess with all that said I give it a B.  It was awesome in some way, but lacking in other ways.  The cool part is that I got to go.  Would I have lived without going? Yes, but it was still cool. I could prattle on about other things and make this post massive, but I’m going to pass and give myself a piece of Sunday to play Rockband and do 800 other things.  I hope the two of you who read this blog are well.  I’ll catch you all at another juncture.  Have a good weekend and varying holidays in between. Technorati Tags: SharePoint,MVP Summit,JQuery,Javascript

    Read the article

  • Telerik Releases a new Visual Entity Designer

    Love LINQ to SQL but are concerned that it is a second class citizen? Need to connect to more databases other than SQL Server? Think that the Entity Framework is too complex? Want a domain model designer for data access that is easy, yet powerful? Then the Telerik Visual Entity Designer is for you. Built on top of Telerik OpenAccess ORM, a very mature and robust product, Teleriks Visual Entity Designer is a new way to build your domain model that is very powerful and also real easy to use. How easy? Ill show you here. First Look: Using the Telerik Visual Entity Designer To get started, you need to install the Telerik OpenAccess ORM Q1 release for Visual Studio 2008 or 2010. You dont need to use any of the Telerik OpenAccess wizards, designers, or using statements. Just right click on your project and select Add|New Item from the context menu. Choose Telerik OpenAccess Domain Model from the Visual Studio project templates. (Note to existing OpenAccess users, dont run the Enable ORM wizard or any other OpenAccess menu unless you are building OpenAccess Entities.) You will then have to specify the database backend (SQL Server, SQL Azure, Oracle, MySQL, etc) and connection. After you establish your connection, select the database objects you want to add to your domain model. You can also name your model, by default it will be NameofyourdatabaseEntityDiagrams. You can click finish here if you are comfortable, or tweak some advanced settings. Many users of domain models like to add prefixes and suffixes to classes, fields, and properties as well as handle pluralization. I personally accept the defaults, however, I hate how DBAs force underscores on me, so I click on the option to remove them. You can also tweak your namespace, mapping options, and define your own code generation template to gain further control over the outputted code. This is a very powerful feature, but for now, I will just accept the defaults.   When we click finish, you can see your domain model as a file with the .rlinq extension in the Solution Explorer. You can also bring up the visual designer to view or further tweak your model by double clicking on the model in the Solution Explorer.  Time to use the model! Writing a LINQ Query Programming against the domain model is very simple using LINQ. Just set a reference to the model (line 12 of the code below) and write a standard LINQ statement (lines 14-16).  (OpenAccess users: notice the you dont need any using statements for OpenAccess or an IObjectScope, just raw LINQ against your model.) 1: using System; 2: using System.Linq; 3: //no need for anOpenAccess using statement 4:   5: namespace ConsoleApplication3 6: { 7: class Program 8: { 9: static void Main(string[] args) 10: { 11: //a reference tothe data context 12: NorthwindEntityDiagrams dat = new NorthwindEntityDiagrams(); 13: //LINQ Statement 14: var result = from c in dat.Customers 15: where c.Country == "Germany" 16: select c; 17:   18: //Print out the company name 19: foreach (var cust in result) 20: { 21: Console.WriteLine("CompanyName: " + cust.CompanyName); 22: } 23: //keep the consolewindow open 24: Console.Read(); 25: } 26: } 27: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Lines 19-24 loop through the result of our LINQ query and displays the results. Thats it! All of the super powerful features of OpenAccess are available to you to further enhance your experience, however, in most cases this is all you need. In future posts I will show how to use the Visual Designer with some other scenarios. Stay tuned. Enjoy! Technorati Tags: Telerik,OpenAccess,LINQ Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Phones, Nokia, Microsoft and More

    - by Bill Evjen
    The phone revolution that is under way at the moment is insanely interesting and continuously full of buzz about directions, failures, and promises. The movement started with Apple completely reinventing what a smart phone was all about and now we have the followers. Though – don’t dismiss the followers, they are usually the ones that come out with the leap frog products when most of the world is thinking about jumping on. Remember the often used analogy – the USA invented the TV – but it was Japan that took it to the next level and now all TVs are from somewhere else other than the USA. Really there are two camps for the phones – the Cool Kids and other kids that no one wants to hang out with anymore. When it comes to cool – for some reason, the phone is an important part of that factor. Everyone wants to show their phone and its configuration (apps installed, etc) to their friends as a sign of (1) “I have money” and (2) I have smarts/tastes/style/etc when it comes to my applications that are on my phone. For those that don’t know – the Cool Kids include: Apple – this is quite obvious as everything Apple produces is in the cool camp. Just having an Apple product on your person means you can dance. Google – this is one of the more interesting releases as they have created something called Android (which in it’s own right is a major brand in itself). Microsoft – you might be saying “Really, Microsoft is cool?”. I would argue that they are indeed cool as it is now associated with XBOX 360, Kinect, and Windows 7. Gone are the days of Bob and that silly paperclip. Well – that’s it. There is nobody else I would stick in that camp. The other kids that weren’t picked for that dodgeball team include: Nokia Motorola Palm Blackberry and many many more The sad part of all this is that no matter what this second camp does now, it won’t be able to get out of this bucket easily. They will always be associated as yesterday’s technology and that association will drive the sales of the phone purchasers of the world. For those in that group, the only possible way out is to get invited to the cool club by one of the cool club members in the hope that their coolness somehow rubs off. To me, this is the move that Nokia is making. They are at this point where they have realized that they don’t have the full scope of the required end to end solution to make this all work. They have the plants to build the phones and the reach of the retailers that sell what they have. What they are missing is the proper operating system for the new world of multi-touch form factor phones. Even the companies that come up with some sort of new operating system for this type of new device, they are still associated with the yesterday and lack the developer community behind them to be the real wave of adoption that this market needs. Think about that – this is a major different between Nokia/Blackberry when you compare it to the likes of Apple, Google, and Microsoft. These three powerhouses having a very large and strong development community that will eagerly take on new initiatives using the skillsets that they have already cultivated over the years of already working with the company. This then results in a plethora of applications that are then placed on an app store of some kind. The developer gets a cut and then Apple/Google/Microsoft then get their cut. It is definitely a win-win. None of the other phone companies and wannabies can provide the same results. What Microsoft was missing was the major phone manufactures coming on board to create and push forward with the phones that are required to start the wave. This is where Nokia can come in and help Microsoft. They have the ability to promote the Windows Phone operating system on a new wave of phones. This does mean that Nokia will sell phones, but they lose out on the application store that they might have been thinking about making some money on as well as controlling the end to end solution. What is interesting is in questioning to oneself if Microsoft will purchase Nokia. It really depends upon how they want to compete and with whom Microsoft views as the major competitor. For instance, they can purchase Nokia and have their own hardware company and distribution network for phones – thereby taking on a model that is quite similar to Apple. On the other hand, they could just leave it up to the phone hardware companies such as Nokia and others to build and promote phones in a model that is similar to Google. Both ways have pluses and minuses. If they own the phone manufacturer, they really can put some thought into the design and technical specifications of the phone that is really designed to exactly how they want it. Microsoft has shown that they have this ability – especially with the XBOX initiative they have done over the years. Think about how good and powerful they have moved forward with XBOX – and I am not talking about just copying what others are doing, but coming up with leapfrog products that are steps ahead of everyone else. Though, if they didn’t do it themselves, they could then leave it up to the phone manufacturers to drive each other to build better and better phones that run the Microsoft OS – competition drives better products. We have seen this with the Android line of phones that are out there on the market. I have read a lot about Nokia investors really upset about the new Microsoft relationship – but really, this is a great thing. I for one am a fan of this relationship (I am also a Nokia stock holder btw). This will mean better days for Nokia.

    Read the article

  • Quicktips 1: Windows 7 Libraries; New website

    - by Michael B. McLaughlin
    I’m working on several large posts right now. So in the interim, I’ve decided to do shorter posts that contain something I find very helpful. This is the first. I’ve been using Windows 7 since April 2010. It’s the first OS I’ve ever worked with that I actually enjoy. I’ve used many over the years (KERNAL; PC DOS; MS-DOS 3.x+; Windows 3.0, 3.11, 95, 98, 98 SE, Me, NT 3.51, NT 4, 2000, XP, Vista, 7; various GNU/Linux distros starting with Debian 1.2 – most recently Ubuntu 10.04; ProDOS, Mac OS 9.X, Mac OS X (through 10.4); SunOS, Solaris; AIX, z/OS; OpenVMS). Some were frustrating. Some tolerable. Some were “nice except for…”. OS X actually started out as seemingly “nice” until every single release contained a breaking change to some major API and they then decided to flip-off everyone who had bought a Mac as little as two years earlier with the release of Snow Leopard without PPC support. Windows 7 is the first one that’s just “nice” without any qualifiers. There are so many little features that add up to make it nice. Today’s Quicktip is one of them. Quicktip 1: Create a Library for your Code One thing I particularly like about Windows 7 is the Libraries feature in Explorer. Specifically the fact that you can create custom ones. I used to spend a lot of time opening new Explorer windows and navigating my various Visual Studio projects folders. Custom libraries allowed me to simplify that whole process. I now simply go to my “Code” library and there it all is. Adding a new library is easy. Open an Explorer window. If you aren’t in your Libraries when it opens, navigate to Libraries. Click the “New library” button. Give it a name. Then right click on the new library you created and go to “Properties”. Click the “Include a folder…” button. Choose the folder you want and press “Include folder”. Voilà! If you wish to add more, simply click “Include a folder…” again and repeat. It’s true that this is just a small time saver. But it’s one of those things that just adds a really nice touch. ------------------------ In a separate note, just before Christmas I finally finished and published my new website: http://www.bobtacoindustries.com/ . I waited to post here about it until I found time to incorporate a few things I hadn’t had the time to do when I pushed it out for its “soft open”. Most of them are now done and so my site is now formally open. I have no plans or intentions of moving my blog ( http://blog.bobtacoindustries.com/ points here). I quite like it here, both in terms of the interface and also in terms of the concept (and realization thereof) of pooling geek bloggers to create a pool of knowledge and helpful tips, tricks, techniques, and advice. I created it simply because I felt that it was time to have a website as I venture further into my return to the land of software development. The “For Devs” section should hopefully be useful to developers, particularly the links section. It’s my curated list of sites that I regularly visit to solve problems, to help answer questions on Twitter and the AppHub forums, and to learn new things. I’ll be adding links to it periodically and will be including topic areas as I become acquainted with them enough to form a proper list. WPF will likely be the first topic area added. If there are any links you think I should add to the existing topics, let me know! I warn in advance that I’m less inclined to add blogs; there are simply too many good blogs and I do not want to have hundreds per topic area. So blogs are limited primarily, though not exclusively, to acknowledged experts in the subject area who generally blog regularly about it and who usually are part of the team that develops the product or technology in question. I’m much more amenable to including individual blogs posts in the techniques subcategory in the appropriate topic area. Ultimately, it’s a collection of things I find interesting and helpful. So please no hard feelings if I don’t add a link you think is awesome. I may well think it’s awesome too, but conclude that it doesn’t fit with my goals for the dev links area.

    Read the article

  • The Customer Experience Imperative: A Game Changer for Brands

    - by Jeri Kelley
    By Anthony Lye, SVP, Cloud Applications Strategy, Oracle We know that customer experience has emerged as a primary differentiator for businesses today.  I’ve talked a lot about the new age of the empowered consumer. At Oracle we’ve spent a lot of time developing technologies and practices that our customers can implement to greatly improve their customer experience strategies. Of course I’m biased, but I think that we have created a portfolio of the best solutions on the planet to help organizations deal with the challenges of providing great customer experiences. We’ve done this because we started to witness some trends over the last few years. As the average person began to utilize social and mobile technologies more frequently and products commoditized, customer experience truly remained the only sustainable differentiator for businesses.In fact, we have seen that customer experience is often driving the success or the failure of a product or a brand. And as end customers have become more vocal about their experiences with companies on social and mobile channels, they now have the power to decide which brands will win and which brands will lose. To address this customer experience imperative, I believe that business today must do three things really well:Connect with your customers. You have to connect with customers whenever, wherever and however they want. Organizations must provide a great experience on their existing channels— the call center, the brick and mortar store, the field sales organizations, the websites and social properties. Businesses must also be great at managing and delivering journeys on these channels, while quickly adapting to embrace the new channels that emerge. You have to understand mobile. You have to understand social. You have to understand kiosks. These are all new routes to market, new channels where your customers may or may not show up. You have to interact with them where they are. You have to present information in a way that's meaningful to them. As well as providing what we would call a multichannel experience. We have to recognize that customers may start their experience on one channel, but end it on a different channel. It’s important that an organization’s technology solutions enable, not just a multichannel strategy, but a strategy that can power new channels and create customer journeys that cross these channels.Get to know your customers. Next, companies need to get to know the customer as intimately as the customer will allow. Today most customer interactions are anonymous, but it’s important for brands to know which customers drive value. Customers want to provide feedback. They want to share their opinions, but they want to know that those opinions are being heard and acted upon. For this to occur, we need to know much more about the customer and then reward them for their loyalty and for their advocacy.Enable connections. The last thing is to enable people to connect or transact with your brand. We've got to make it really, really simple for customers to do business with us. We can't make them repeat the steps; we can't make them tell us their identity for the fifth time as they move between organizations. These silos can no longer sustain or deliver a good customer experience. It's extremely important that companies be where customers want them to be—that we create profitable journeys for us and for them.Organizations have to make sure that there is a single source of truth that defines the customer. We have to make sure that the technology applications that we rely on understand not just the dimensions of multichannel, but of cross-channel too. We have to enable social at the very core of the overall architecture. We have to use historical analytics, real-time decisioning as well as predictive analytics to help personalize and drive an experience. And these are all technologies that IT needs, that IT is familiar with, but needs to enable for the line of business that in turn can enable for the end customer.  This means that we've got to make our solutions available to the customers in the cloud.In this new age of the empowered consumer, businesses have to focus on delivery mechanisms that reduce the overall TCO, while driving a rapid rate of innovation and a more rapid rate of deployment. At the Oracle Customer Experience Summit @ OpenWorld, I’ll discuss these issues and more. I hope that you can join us for what promises to be an unforgettable experience.

    Read the article

  • Some New .NET Downloads and Resources

    - by Kevin Grossnicklaus
    Last week I was fortunate enough to spend time in Redmond on Microsoft’s campus for the 2011 Microsoft MVP Summit.  It was great to hang out with a number of old friends and get the opportunity to talk tech with the various product teams up at Microsoft.  The weather wasn’t exactly sunny but Microsoft always does a great job with the Summit and everyone had a blast (heck, I even got to run the bases at SafeCo field) While much of what we saw is covered under NDA, there a ton of great things in the pipeline from Microsoft and many things that are already available (or just became so) that I wasn’t necessarily aware of.  The purpose of this post is to share some of the info I learned on resources and tools available to .NET developers today.  Please let me know if you have any questions (or if you know of something else cool which might benefit others). Enjoy! Visual Studio 2010 SP1 Microsoft has issued the RTM release of Visual Studio 2010 SP1.  You can download the full SP1 on MSDN as of today (March 10th to the general public) and take advantage of such things as: Silverlight 4 is included in the box (as opposed to a separate install) Silverlight 4 Profiling WCF RIA Services SP1 Intellitrace for 64-bit and SharePoint ASP.NET now easily supports IIS Express and SQL CE Want a description of all that’s new beyond the above biased list (which arguably only contains items I think are important)?  Check out this KB article. Portable Library Tools CTP Without much fanfare Microsoft has released a CTP of a new add-in to Visual Studio 2010 which simplifies code sharing between projects targeting different runtimes (i.e. Silverlight, WPF, Win7 Phone, XBox).   With this Add-In installed you can add a new project of type “Portable Library” and specify which platforms you wish to target.  Once that is done, any code added to this library will be limited to use only features which are common to all selected frameworks.  Other projects can now reference this portable library and be provided assemblies custom built to their environment.  This greatly simplifies the current process of sharing linked files between platforms like WPF and Silverlight.  You can find out more about this CTP and how it works on this great blog post. Visual Studio Async CTP Microsoft has also released a CTP of a set of language and framework enhancements to provide a much more powerful asynchronous programming model.   Due to the focus on async programming in all types of platforms (and it being the ONLY option in Silverlight and Win7 phone) a move towards a simpler and more understandable model is always a good thing. This CTP (called Visual Studio Async CTP) can be downloaded here.  You can read more about this CTP on this blog post. MSDN Code Samples Gallery Microsoft has also launched new code samples gallery on their MSDN site: http://code.msdn.microsoft.com/.   This site allows you to easily search for small samples of code related to a particular technology or platform.  If a sample of code you are looking for is not found, you can request one via the site and other developers can see your request and provide a sample to the site to suit your needs.  You can also peruse requested samples and, if you find a scenario where you can provide value, upload your own sample for the benefit of others.  Samples are packaged into the VS .vsix format and include any necessary references/dependencies.  By using .vsix as the deployment mechanism, as samples are installed from the site they are kept in your Visual Studio 2010 Samples Gallery and kept for your future reference. If you get a chance, check out the site and see how it is done.  Although a somewhat simple concept, I was very impressed with their implementation and the way they went about trying to suit a need.  I’ll definitely be looking there in the future as need something or want to share something. MSDN Search Capabilities Another item I learned recently and was not aware of (that might seem trivial to some) is the power of the MSDN site’s search capabilities.  Between the Code Samples Gallery described above and the search enhancements on MSDN, Microsoft is definitely investing in their platform to help provide developers of all skill levels the tools and resources they need to be successful. What do I mean by the MSDN search capability and why should you care? If you go to the MSDN home page (http://msdn.microsoft.com) and use the “Search MSDN with Big” box at the very top of the page you will see some very interesting results.  First, the search actually doesn’t just search the MSDN library it searches: MSDN Library All Microsoft Blogs CodePlex StackOverflow Downloads MSDN Magazine Support Knowledgebase (I’m not sure it even ends there but the above are all I know of) Beyond just searching all the above locations, the results are formatted very nicely to give some contextual information based on where the result came from.  For example, if a keyword search returned results from CodePlex, each row in the search results screen would include a large amount of information specific to CodePlex such as: Looking at the above results immediately tells you everything from the page views to the CodePlex ratings.  All in all, knowing that this much information is indexed and available from a single search location will lead me to utilize this as one of my initial searches for development information.

    Read the article

  • Mouse takes a while to start working after boot

    - by warkior
    I just recently installed Ubuntu 12.04 (64 bit) and a number of my USB devices have stopped working. At least, they don't work for the first 3-5 minutes. I have two mice (one wireless, one wired) and a camera, which seem to take Ubuntu 3-5 minutes to recognize after booting up. Eventually, they do start to work, but it takes ages! lsusb results: (when the mice are working...) $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c512 Logitech, Inc. LX-700 Cordless Desktop Receiver Bus 003 Device 003: ID 03f0:3f11 Hewlett-Packard PSC-1315/PSC-1317 Bus 006 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 006 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver syslog entries for what seems (to my very untrained eye) to be the problem: Oct 12 20:12:51 REMOVED-GA-MA785GM-US2H kernel: [ 17.420117] usb 2-3: device descriptor read/64, error -110 Oct 12 20:12:57 REMOVED-GA-MA785GM-US2H goa[1879]: goa-daemon version 3.4.0 starting [main.c:112, main()] Oct 12 20:13:06 REMOVED-GA-MA785GM-US2H kernel: [ 32.636107] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:06 REMOVED-GA-MA785GM-US2H kernel: [ 32.852122] usb 2-3: new high-speed USB device number 3 using ehci_hcd Oct 12 20:13:21 REMOVED-GA-MA785GM-US2H kernel: [ 47.964131] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:37 REMOVED-GA-MA785GM-US2H kernel: [ 63.180115] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:37 REMOVED-GA-MA785GM-US2H kernel: [ 63.396126] usb 2-3: new high-speed USB device number 4 using ehci_hcd Oct 12 20:13:47 REMOVED-GA-MA785GM-US2H kernel: [ 73.804158] usb 2-3: device not accepting address 4, error -110 Oct 12 20:13:47 REMOVED-GA-MA785GM-US2H kernel: [ 73.916190] usb 2-3: new high-speed USB device number 5 using ehci_hcd Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.324160] usb 2-3: device not accepting address 5, error -110 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.324197] hub 2-0:1.0: unable to enumerate USB device on port 3 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: failed to claim interface Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: Failed to get parent Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: device devpath is /devices/pci0000:00/0000:00:12.0/usb3/3-3 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: MFG:hp MDL:psc 1310 series SERN:CN47CB60BJO2 serial:CN47CB60BJO2 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.768132] usb 5-3: new full-speed USB device number 2 using ohci_hcd Oct 12 20:14:01 REMOVED-GA-MA785GM-US2H udev-configure-printer: no corresponding CUPS device found Oct 12 20:14:13 REMOVED-GA-MA785GM-US2H kernel: [ 99.904185] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:29 REMOVED-GA-MA785GM-US2H kernel: [ 115.144188] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:29 REMOVED-GA-MA785GM-US2H kernel: [ 115.384178] usb 5-3: new full-speed USB device number 3 using ohci_hcd Oct 12 20:14:44 REMOVED-GA-MA785GM-US2H kernel: [ 130.520196] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:59 REMOVED-GA-MA785GM-US2H kernel: [ 145.760179] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:59 REMOVED-GA-MA785GM-US2H kernel: [ 146.000173] usb 5-3: new full-speed USB device number 4 using ohci_hcd Oct 12 20:15:10 REMOVED-GA-MA785GM-US2H kernel: [ 156.408168] usb 5-3: device not accepting address 4, error -110 Oct 12 20:15:10 REMOVED-GA-MA785GM-US2H kernel: [ 156.544188] usb 5-3: new full-speed USB device number 5 using ohci_hcd Oct 12 20:15:20 REMOVED-GA-MA785GM-US2H kernel: [ 166.952181] usb 5-3: device not accepting address 5, error -110 Oct 12 20:15:20 REMOVED-GA-MA785GM-US2H kernel: [ 166.952215] hub 5-0:1.0: unable to enumerate USB device on port 3 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.216164] usb 6-2: new low-speed USB device number 2 using ohci_hcd Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: checking bus 6, device 2: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-2" Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: bus: 6, device: 2 was not an MTP device Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.396138] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input16 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.396442] generic-usb 0003:046D:C00C.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:13.1-2/input0 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.660187] usb 6-3: new full-speed USB device number 3 using ohci_hcd Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: checking bus 6, device 3: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-3" Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: bus: 6, device: 3 was not an MTP device Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.859045] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3/input2 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.865086] input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.2/0003:046D:C52B.0006/input/input17 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.865291] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:13.1-3:1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2040: invalid product id string ret=-1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2045: invalid serial id string ret=-1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2050: invalid manufacturer string ret=-1

    Read the article

  • Building a plug-in for Windows Live Writer

    - by mbcrump
    This tutorial will show you how to build a plug-in for Windows Live Writer. Windows Live Writer is a blogging tool that Microsoft provides for free. It includes an open API for .NET developers to create custom plug-ins. In this tutorial, I will show you how easy it is to build one. Open VS2008 or VS2010 and create a new project. Set the target framework to 2.0, Application Type to Class Library and give it a name. In this tutorial, we are going to create a plug-in that generates a twitter message with your blog post name and a TinyUrl link to the blog post.  It will do all of this automatically after you publish your post. Once, we have a new projected created. We need to setup the references. Add a reference to the WindowsLive.Writer.Api.dll located in the C:\Program Files (x86)\Windows Live\Writer\ folder, if you are using X64 version of Windows. You will also need to add a reference to System.Windows.Forms System.Web from the .NET tab as well. Once that is complete, add your “using” statements so that it looks like whats shown below: Live Writer Plug-In "Using" using System; using System.Collections.Generic; using System.Text; using WindowsLive.Writer.Api; using System.Web; Now, we are going to setup some build events to make it easier to test our custom class. Go into the Properties of your project and select Build Events, click edit the Post-build and copy/paste the following line: XCOPY /D /Y /R "$(TargetPath)" "C:\Program Files (x86)\Windows Live\Writer\Plugins\" Your screen should look like the one pictured below: Next, we are going to launch an external program on debug. Click the debug tab and enter C:\Program Files (x86)\Windows Live\Writer\WindowsLiveWriter.exe Your screen should look like the one pictured below:   Now we have a blank project and we need to add some code. We start with adding the attributes for the Live Writer Plugin. Before we get started creating the Attributes, we need to create a GUID. This GUID will uniquely identity our plug-in. So, to create a GUID follow the steps in VS2008/2010. Click Tools from the VS Menu ->Create GUID It will generate a GUID like the one listed below: GUID <Guid("56ED8A2C-F216-420D-91A1-F7541495DBDA")> We only want what’s inside the quotes, so your final product should be: "56ED8A2C-F216-420D-91A1-F7541495DBDA". Go ahead and paste this snipped into your class just above the public class. Live Writer Plug-In Attributes [WriterPlugin("56ED8A2C-F216-420D-91A1-F7541495DBDA",    "Generate Twitter Message",    Description = "After your new post has been published, this plug-in will attempt to generate a Twitter status messsage with the Title and TinyUrl link.",    HasEditableOptions = false,    Name = "Generate Twitter Message",    PublisherUrl = "http://michaelcrump.net")] [InsertableContentSource("Generate Twitter Message")] So far, it should look like the following: Next, we need to implement the PublishNotifcationHook class and override the OnPostPublish. I’m not going to dive into what the code is doing as you should be able to follow pretty easily. The code below is the entire code used in the project. PublishNotificationHook public class Class1 :  PublishNotificationHook  {      public override void OnPostPublish(System.Windows.Forms.IWin32Window dialogOwner, IProperties properties, IPublishingContext publishingContext, bool publish)      {          if (!publish) return;          if (string.IsNullOrEmpty(publishingContext.PostInfo.Permalink))          {              PluginDiagnostics.LogError("Live Tweet didn't execute, due to blank permalink");          }          else          {                var strBlogName = HttpUtility.UrlEncode("#blogged : " + publishingContext.PostInfo.Title);  //Blog Post Title              var strUrlFinal = getTinyUrl(publishingContext.PostInfo.Permalink); //Blog Permalink URL Converted to TinyURL              System.Diagnostics.Process.Start("http://twitter.com/home?status=" + strBlogName + strUrlFinal);            }      } We are going to go ahead and create a method to create the short url (tinyurl). TinyURL Helper Method private static string getTinyUrl(string url) {     var cmpUrl = System.Globalization.CultureInfo.InvariantCulture.CompareInfo;     if (!cmpUrl.IsPrefix(url, "http://tinyurl.com"))     {         var address = "http://tinyurl.com/api-create.php?url=" + url;         var client = new System.Net.WebClient();         return (client.DownloadString(address));     }     return (url); } Go ahead and build your project, it should have copied the .DLL into the Windows Live Writer Plugin Directory. If it did not, then you will want to check your configuration. Once that is complete, open Windows Live Writer and select Tools-> Options-> Plug-ins and enable your plug-in that you just created. Your screen should look like the one pictured below: Go ahead and click OK and publish your blog post. You should get a pop-up with the following: Hit OK and It should open a Twitter and either ask for a login or fill in your status as shown below:   That should do it, you can do so many other things with the API. I suggest that if you want to build something really useful consult the MSDN pages. This plug-in that I created was perfect for what I needed and I hope someone finds it useful.

    Read the article

< Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >