Search Results

Search found 31491 results on 1260 pages for 'simple talk'.

Page 340/1260 | < Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >

• Xorg server won't start after fresh install of Debian 5.04, screen goes blank (Intel Atom D510(Pinet

  - by Kamil Zadora

  Hello, I have installed Debian 5.04 Lenny on my new Intel D510MO motheboard. I fixed some issues with incorrect drive mapping (for some reason during installation my hdd was on sdb, after a restart it is under sda - fixed in grub), and now I am struggling with getting graphical enviroment up and running, I installed the graphical enviroment using the Debian installer. I am not an linux expert by any means, I assume that I need to edit the xorg.conf file. Any hints appreciated! UPDATE1: No change after dpkg-reconfigure xserver-xorg Here is my current xorg.conf: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "pl" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" EndSection Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" EndSection UPDATE2: I have installed vnc4server package. I can connect over vnc from my windows 7 laptop and i see empty desktop with terminal window open. Seems that the xserver and gdm are running but they cant talk with my GPU. I am not sure if a can use any gui tool to configure it overthe vnc, as all I see is the terminal window, no taskbars etc. UPDATE3: My current Xorg.0.log http://pastebin.pl/18918 The graphic chipset integrated into the D510 processor is Intel 945GC

  Read the article

• Mac OS X 10.6 Setup for Apache/MySQL/Perl

  - by Russell C.

  I just got a new Mac and have been trying to setup a local development environment for my perl applications for a few days now with no luck. I'm getting no where fast so I hope someone else who has done this successfully could help. I started by installing MAMP which I thought would take care of everything for me but unfortunately it doesn't take care of some important perl modules. I used CPAN to install all our required modules except that it seems DBD::mysql doesn't install correctly through CPAN. After reading a lot online, lots of people reported problems with this and recommended using MacPorts to install the module which I have tried doing with no luck using the following command: sudo port install p5-dbd-mysql After what seems like a successful install of DBD::mysql, Apache continues to report the following error when trying to run any of our Perl scripts: [Fri Apr 30 18:51:07 2010] [error] [client 127.0.0.1] install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /Library/Perl/Updates/5.10.0/darwin-thread-multi-2level /Library/Perl/Updates/5.10.0 /System/Library/Perl/5.10.0/darwin-thread-multi-2level /System/Library/Perl/5.10.0 /Library/Perl/5.10.0/darwin-thread-multi-2level /Library/Perl/5.10.0 /Network/Library/Perl/5.10.0/darwin-thread-multi-2level /Network/Library/Perl/5.10.0 /Network/Library/Perl /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level /System/Library/Perl/Extras/5.10.0 .) at (eval 1835) line 3. [Fri Apr 30 18:51:07 2010] [error] [client 127.0.0.1] Perhaps the DBD::mysql perl module hasn't been fully installed, [Fri Apr 30 18:51:07 2010] [error] [client 127.0.0.1] or perhaps the capitalisation of 'mysql' isn't right. [Fri Apr 30 18:51:07 2010] [error] [client 127.0.0.1] Available drivers: DBM, ExampleP, File, Gofer, Proxy, SQLite, Sponge. I'm not sure where to go from here but my Mac isn't much of a development environment if Perl isn't able to talk to the database. I'd really appreciate any help and advice you might be able to provide in getting my system setup successfully. Thanks in advance!

  Read the article

• Where can I ask questions that aren't IT questions?

  - by Adam Davis

  Thank you for your confidence in our abilities But have you read this? FAQ We get a lot of interesting technical questions on here, but Server Fault is meant to be first and foremost a resource for system administrators and IT professionals. In other words, Server Fault isn't meant to cater to every computer problem - just those that only exist in or can best be solved in the IT and sysadmin domain Yes, someone here might be able to help you, but you'll find that other forums more focused on your topic can give you a much better answer than a bunch of IT professionals. It's likely that your question will be downvoted, closed, and in some cases marked "offensive." It's not that we hate you, it's just that we like to keep our corn pops separate from our cocoa puffs. In that vein, here are a bunch of other forums where you can get help: (This list contains the top two forums for each category as voted for below.) Programming Stackoverflow Consumer Level Computer Hardware Ars Technica OpenForum Tom's Hardware Forums Computer Software Anandtech Forum Web Design/Hosting/CMS SitePoint Forums Web Hosting Talk Math, Science, Engineering Physics Forums PlanetMath Other/General Ask Metafilter Google Search Mahalo Answers Check out the answers below for even more suggestions! What forums can people go to to ask the questions that are off topic here? Please list only ONE forum per answer so votes can bring the best forums to the top. Return to FAQ Index

  Read the article

• Query Execution Failed in Reporting Services reports

  - by Chris Herring

  I have some reporting services reports that talk to Analysis Services and at times they fail with the following error: An error occurred during client rendering. An error has occurred during report processing. Query execution failed for dataset 'AccountManagerAccountManager'. The connection cannot be used while an XmlReader object is open. This occurs sometimes when I change selections in the filter. It also occurs when the machine has been under heavy load and then will consistently error until SSAS is restarted. The log file contains the following error: processing!ReportServer_0-18!738!04/06/2010-11:01:14:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for dataset 'AccountManagerAccountManager'., ; Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for dataset 'AccountManagerAccountManager'. ---> System.InvalidOperationException: The connection cannot be used while an XmlReader object is open. at Microsoft.AnalysisServices.AdomdClient.XmlaClient.CheckConnection() at Microsoft.AnalysisServices.AdomdClient.XmlaClient.ExecuteStatement(String statement, IDictionary connectionProperties, IDictionary commandProperties, IDataParameterCollection parameters, Boolean isMdx) at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.IExecuteProvider.ExecuteTabular(CommandBehavior behavior, ICommandContentProvider contentProvider, AdomdPropertyCollection commandProperties, IDataParameterCollection parameters) at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior) at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior) at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunDataSetQuery() Can anyone shed light on this issue?

  Read the article

• What might cause https failure when not specifying SSL protocol?

  - by user35042

  I have a VBScript program that retrieves a web page from a server not under my control. The URL looks something like https://someserver.xxx/index.html. I use this code to create the object that does the page getting: Set objWinHttp = CreateObject("WinHttp.WinHttpRequest.5.1") When I wrote my program it had no problem retrieving this page. Recently, the web server serving this page went through an upgrade. Now my program can no longer fetch the page. Some clues: Clue 1. I can fetch the web page if I use a browser (I tried Firefox, IE, and Chrome). Clue 2. The VBScript code yields this error: The message received was unexpected or badly formatted. Clue 3. I can fetch the web page from the command line in certain cases but not in others: curl --sslv3 -v -k 'https://someserver.xxx/index.html' # WORKS! curl --sslv2 -v -k 'https://someserver.xxx/index.html' # WORKS! curl -v -k 'https://someserver.xxx/index.html' # FAILS curl --tlsv1 -v -k 'https://someserver.xxx/index.html' # FAILS In the case where I do not specify a protocol I get this error: * SSLv3, TLS handshake, Client hello (1): * error:14077417:SSL routines:SSL23_GET_SERVER_HELLO:sslv3 alert illegal parameter * Closing connection #0 In the case where I specify --tlsv1 I get this error: * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS alert, Server hello (2): * error:14094417:SSL routines:SSL3_READ_BYTES:sslv3 alert illegal parameter * Closing connection #0 A. Does anyone have any suggestions or ideas on what might be going on at the web server end (I am unable to talk to the admins of the web server to find out what they changed). B. Is there a way I can change my VBScript code to work around this issue? Can the SSL version be forced?

  Read the article

• setting up synergy (multi-computer shared input devices) new to mac

  - by pedalpete

  I've just gotten a mac and the first thing I'm trying to do in setting it up for dev is to set-up synergy. I've run into countless issues, and am making progress, but that 'mac's just work' theory is getting tired really fast. I'd prefer running the mac as the server, as it's a desktop. why use my pc(laptop) as the server. So i downloaded synergy, and tried to edit the 'synergy.conf' file. First with textmate, then with apple script. Neither of these applications will open the file. Even after changing textmate to use plain text format and switching off a few other things to make it into a plain text editor. No good. Uh, isn't that what these script/text editors are for? Then I found SyneryKM which is a package to run synergy on osx. Took LOTS of fiddling, but I think I finally kinda got it figured out. I've got my pc & mac both running synergy. However, my pc will only connect to synergy using the ip address. No problem, however, my mac won't connect to itself as a synergy server using the IP address. If I use the ip address as a screen in the 'server configuration file', i get a 'Error: unknown screen name mymac'. I know this shouldn't be super complicated, and possibly not the place to find answers about synergy, but I couldn't find a better place, and there has been some talk of synergy here. Any chance somebody can help with this?

  Read the article

• pros and cons with server management gui tools to manage linux web servers

  - by ajsie

  i have stumbled upon these GUI tools that could help you manage your linux server through a web interface. ebox, webmin, ispconfig, zivios, ispcp, plesk, cpanel etc. i wonder what the pros and cons are with these solutions. a lot of people is saying that they are not as good as using pure command line (ssh) to manage your server. but i think thats yet another "linux are for advanced users" talk. i agree that a lot of things may only be done with the command line by editing directly in the configuration files. but i don't really want to do that every time and for everything. especially basic configurations these could manage. its like not having phpmyadmin for managing mysql. it would be a pain in the ass right? so if one wants to throw up a web server serving a php site oneself developed and wants all the usual stuff up and running (mysql, phpmyadmin, svn, webdav etc) is these tools the right way to go? and for more advanced features, one just use the terminal like old days. is this a smart way of managing a linux server? and which one would you choose? have you used any of these and could share your thoughts about them?

  Read the article

• ClearOS - how to create a site to site VPN between two ClearOS boxes?

  - by Scott Szretter

  I plan on setting up some ClearOS boxes at several sites, and would like to set up site-to-site VPN between the remote sites and a main site (all running ClearOS enterprise 5.2sp1 / latest version). I have found references for how to set up ClearOS to VPN in to devices such as cisco for IPSEC, and others with PPTP. But for these methods it did not mention how you might configure 2 ClearOS boxes to talk to each other ipsec or pptp. I also saw documentation on installing OpenVPN and using the OpenVPN client software to VPN in to the ClearOS box. I will probably use this for individual users to VPN in, but I have some small sites ( 1 to 10 users) that will have their own ClearOS box and need to create a site to site VPN link back to the main site's OpenVPN box. Is this possible, can you point me to docs, or other info or basically, how? A couple updates: I did find a thread that asks the same basic question, where the user has a vpn set up between the two clearos machines (after installing ipsec vpn modules), just not transporting traffic between the LANS - and the very last post claims you have to edit some files (/etc/ipsec.conf) and set leftnexthop rightnexthop values to %direct. After that, it's supposed to work. Could it be that simple? I also posted to clear foundation, and they pointed me to some documentation for setting up ipsec unmanaged vpn. This looks pretty good, but, I will most likely need to figure out how to handle a dynamic dns type setup at least on one end. Also, what does it mean by multi-wan? Finally, what happens when a vpn connection goes down exactly - someone has to reboot the box or ?

  Read the article

• Trouble with IIS SMTP relaying to Gmail

  - by saille

  I appreciate that similar questions have been asked about how to setup SMTP relaying with IIS's virtual SMTP server. However I'm still completely stumped on this problem. Here's the setup: IIS 6.0 SMTP server running on Win2k3 box with a NAT'ed IP. Company uses Gmail for all email services. An app on the box needs to send email, so normally we'd just set the app up to talk to smtp.gmail.com directly, but this app doesn't support TLS. Easy, we just setup a local SMTP relay right? So I thought. What we have done so far: Setup IIS SMTP server to relay to smtp.gmail.com, as per these excellent instructions: http://fmuntean.wordpress.com/2008/10/26/how-to-configure-iis-smtp-server-to-forward-emails-using-a-gmail-account/ The local SMTP relay allows anonymous access. Both the local IP and the loopback IP have been explicitly allowed in the Connection... and Relay... dialogs. Tried sending email from 2 different apps via the local SMTP server, but failed (the emails end up in the Queue folder, but never get sent). The IIS logs show the conversation with the local app, but zero conversation happening with smtp.gmail.com. The port used by gmail is open outbound, and indeed the apps we have that support TLS can send email directly via smtp.gmail.com, so there is no problem with the network. At this point I changed the smtp settings in IIS SMTP server to use a different external SMTP server and hey-presto, the local apps can send email via local IIS SMTP relay. So smtp.gmail.com fails to work with our IIS SMTP relay, but another 3rd party SMTP service works fine. We need to use smtp.gmail.com, so how to troubleshoot this one?

  Read the article

• Need Help Accessing the Vista Wampserver localhost from Virtual PC 2007 running an XP VM.

  - by Reg

  (I had posted this on stack overflow but it was suggested there that I post it here instead). I have a Vista laptop on which I'm running wampserver. I have Virtual PC 2007 setup with Windows XP running on the VM. My goal is to be able to use the XP VM to run IE6 to view the localhost in the Vista wampserver. I'm not interested in having the XP VM have any access to the internet -- only to my Vista wampserver's localhost. The vista wampserver works fine. As suggested on a blog I read, I installed the loopback adapter on Vista and I set the loopback to 192.168.21.1 and I set the xp vm ip to 192.168.21.2. I am able to successfully ping the vista-loopback adapter from the xp vm. I've turned the wampserver to "server online", and I've disabled the firewalls in both the vista host and the xp vm. But for some reason, I still can't seem to get the virtual XP to see the localhost on the vista wampserver. I've tried using the vista //name, and I've tried the ip 192.168.21.1 directly and with the port. For whatever its worth, I'm not able to see anything under the XM VM's network places (though I don't know if I'm supposed to be able to see anything). So at this point I'm stuck and I'm still not sure how to get this XP VM to "talk" to my vista wampserver localhost. Any advice on how to fix this problem is much appreciated. Thanks in advance for your help. -R

  Read the article

• Installing Munin on Centos 6

  - by justinhj

  I've hit problems installing munin on Centos 6. This seems to be a conflict between parts of Perl. I think the version of Perl is newer on Centos 6 (v5.10.1) When installing munin via yum I get errors relating to perl dependencies as below. I'm not a big enough whiz at yum or rpm to figure out the issue. Munin documentation does not yet talk about installing to Centos 6.0 Error: Package: munin-node-1.4.2-0.rpl1.el5.noarch (/munin-node-1.4.2-0.rpl1.el5.noarch) Requires: perl(Net::SNMP) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: bitstream-vera-fonts Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(HTML::Template) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl-Net-SNMP Error: Package: munin-common-1.4.2-0.rpl1.el5.noarch (/munin-common-1.4.2-0.rpl1.el5.noarch) Requires: perl(:MODULE_COMPAT_5.8.8) Error: Package: munin-node-1.4.2-0.rpl1.el5.noarch (/munin-node-1.4.2-0.rpl1.el5.noarch) Requires: perl(DBI) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(Log::Log4perl) Error: Package: munin-node-1.4.2-0.rpl1.el5.noarch (/munin-node-1.4.2-0.rpl1.el5.noarch) Requires: perl(LWP::Simple) Error: Package: munin-node-1.4.2-0.rpl1.el5.noarch (/munin-node-1.4.2-0.rpl1.el5.noarch) Requires: perl(:MODULE_COMPAT_5.8.8) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(RRDs) Error: Package: munin-node-1.4.2-0.rpl1.el5.noarch (/munin-node-1.4.2-0.rpl1.el5.noarch) Requires: perl-Net-Server Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(Date::Manip) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(:MODULE_COMPAT_5.8.8) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl-Net-Server Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(CGI::Fast) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(Time::HiRes)

  Read the article

• A network-related or instance-specific error occurred while establishing a connection to SQL Server

  - by sf

  Hi, I'm getting the following error when trying to load an Asp.NET MVC App on IIS 7 with Sql Server 2008 Express. The App uses Linq to SQL. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I've done some searching and all answers point to enabling TCP connections in Sql Server Configuration which I have done to no avail. The connection string I am using is: Server=SERVERNAME\SQLEXPRESS;Database=DBName;Integrated Security=true The catch. I have another app that already could talk to the Sql Server just fine. Even before playing around with the Sql Server Configuration Settings. The other app uses the following connectionstring: Data Source=SERVERNAME\SQLEXPRESS;Initial Catalog=OtherDbName;Integrated Security=True;Persist Security Info=False;Connect Timeout=120 I've tried this connectionstring on the app that isn't working and it still doesn't work. Please help. I think i'm about to go crazy

  Read the article

• Bringing people into an Asterisk conference call

  - by Harley

  I'm using Asterisk 1.4 and am trying to work out a way to bring people into a conference call. In the ideal scenario two people would be talking and one of them would push some keys, then a phone number and then the three of them would be in a conference. From there they should be able to bring in other people as well. This seems to be what the Asterisk n-way call HOWTO is trying to do, but it doesn't work quite properly for me. Here's what happens: 1. Internal person A calls person B 2. Person A presses *0, he is given a dial tone and person B is taken to a conference room 3. Person A calls person C and they can talk, and then person A presses **. 4. Person C is brought to the conference room, but person A is disconnected. In the last step, A should be taken to the conference room as well. Here's the relevant logs, where 230 is person A, 231 is person B, 207 is person C, and 282 is the conference room.

  Read the article

• RPCSS kerberos issues on imaged Windows workstations

  - by sysadmin1138

  While doing some unrelated troubleshooting I came across a set of Event Log entries that have me concerned. Machine Name: labcomputer82 Source: Security-Kerberos Event ID: 4 Event Description: The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server labcomputer143$. The target name used was RPCSS/imagemaster4.ad.domain.edu. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also happen when the target service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to use the current password. If the server name is not fully qualified, and the target domain (AD.DOMAIN.EDU) is different from the client domain (AD.DOMAIN.EDU), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server. There are three machine names used in this message. It's generated on labcomputer82, it's attempting to talk to another lab workstation called labcomputer143, and the service in question (RPCSS) refers to the name of the machine that this machine was imaged from (and possibly also that of labcomputer143, I'm not sure). The thing that has me raising both eyebrows is that the machine named labcomputer82 is attempting to use an SPN of RPCSS/imagemaster4.ad.domain.edu. The SPN attribute on the computer object in AD looks just fine. It has all the names it should have. Of the over 3,000 computer objects in our AD domain, somewhere around 1,700 of the are computer-lab seats that are frequently imaged. If we're doing something wrong, I'd like to know in time to get our procedures modified (and people retrained) for fall quarter. But if this is normal for imaged machines, I'll just continue ignoring these.

  Read the article

• Error in data view when connecting to an Oracle DB

  - by Mike Polen

  When using SharePoint Designer I found this link that stepped me through how to get it working: http://spsolution.blogspot.com/2008/12/how-to-insert-data-source-in-sharepoint.html That allowed SharePoint Designer to talk to Oracle, but when I placed a data view on a page it gave me the following error: Error while executing web part: System.Data.OracleClient.OracleException: ORA-00923: FROM keyword not found where expected at System.Data.OracleClient.OracleConnection.CheckError(OciErrorHandle errorHandle, Int32 rc) at System.Data.OracleClient.OracleCommand.Execute(OciStatementHandle statementHandle, CommandBehavior behavior, Boolean needRowid, OciRowidDescriptor& rowidDescriptor, ArrayList& resultParameterOrdinals) at System.Data.OracleClient.OracleCommand.Execute(OciStatementHandle statementHandle, CommandBehavior behavior, ArrayList& resultParameterOrdinals) at System.Data.OracleClient.OracleCommand.ExecuteReader(CommandBehavior behavior) at System.Data.OracleClient.OracleCommand.ExecuteDbDataReader(CommandBehavior behavior) at System.Data.Common.DbCommand.Syst... 09/14/2009 14:40:23.52* w3wp.exe (0x0FA0) 0x1A88 Windows SharePoint Services Web Parts 89a1 Monitorable ... em.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) at System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigatorInternal() ... 09/14/2009 14:40:23.52* w3wp.exe (0x0FA0) 0x1A88 Windows SharePoint Services Web Parts 89a1 Monitorable ... at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigator() at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigator(IDataSource datasource, Boolean originalData) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.GetXPathNavigator(String viewPath) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform() I am mystified.

  Read the article

• Getting Perl DBD::mysql working on OS X 10.7?

  - by Bart B

  I can't seem to get Perl & MySQL to talk to each other on OS X 10.7 Lion. I did all the installs by the book, I used Oracle's PKG installer for the latest MySQL Community Server, and I installed DBI and DBD::mysql via CPAN. There were not problems at all during the install, but, when I try to USE DBD::mysql to connect to my local DB server I get the following error: install_driver(mysql) failed: Can't load '/Library/Perl/5.12/darwin-thread-multi-2level/auto/DBD/mysql/mysql.bundle' for module DBD::mysql: dlopen(/Library/Perl/5.12/darwin-thread-multi-2level/auto/DBD/mysql/mysql.bundle, 1): Library not loaded: /usr/local/mysql/lib/libmysqlclient.16.dylib Referenced from: /Library/Perl/5.12/darwin-thread-multi-2level/auto/DBD/mysql/mysql.bundle Reason: image not found at /System/Library/Perl/5.12/darwin-thread-multi-2level/DynaLoader.pm line 204. at (eval 3) line 3 Compilation failed in require at (eval 3) line 3. Perhaps a required shared library or dll isn't installed where expected After a lot of googling all I could find were suggested hacks, so I gave this one a go: http://arkoftech.wordpress.com/2011/02/10/fixing-dbdmysql-for-mysql-5-5-89-under-macos-10-6-x/ I had to update some of the paths in the instructions since on Lion it's Perl 5.12 not 5.10. After doing that I got a new error: dyld: lazy symbol binding failed: Symbol not found: _mysql_init Referenced from: /Library/Perl/5.12/darwin-thread-multi-2level/auto/DBD/mysql/mysql.bundle Expected in: flat namespace dyld: Symbol not found: _mysql_init Referenced from: /Library/Perl/5.12/darwin-thread-multi-2level/auto/DBD/mysql/mysql.bundle Expected in: flat namespace Trace/BPT trap: 5 There must be a simple way to get MySQL & Perl working on OS X? - HELP!

  Read the article

• IIS serving static content gives 503 at random

  - by Steffen

  We're having a few issues with our image server. It's a Win 2008 running IIS 7.5 and it only serves static content: images. It has run without issues for quite a while, until recently when we disabled Output Caching, as we noticed having it enabled meant it sent no-cache host-headers to the clients (forcing them to fetch the images from the server every time) We've read quite a bit about it, and it seems IIS just works that way - either you use Output Caching or you get to use cache host-headers. Anyway having disabled the Output Cache, we now experience random 5 minutes intervals, where all requests just get a 503 Service Unavailable. During this period the "Files cached" performance counter staggers (neither increased nor decreased) and after the period all caches are flushed. You might find it weird I talk about caching, since we disabled Output Caching. The thing is we changed the ObjectTTL parameter in registry, so we cache files for 3 minutes (which has worked very well, our Disk I/O dropped significantly) So even with Output Caching disabled, we're still caching plenty of files - if we could just get rid of the random 503 it'd be perfect :-D We don't get any messages in the Windows event log during these 503 intervals, so we're pretty stumped as to what to do. Any ideas are very welcome :-)

  Read the article

• puppet cert mismatch in ec2

  - by Stick

  I'm setting up a puppetmaster (2.7.6) in ec2 via gems (on rhel6) and I'm running into problems with the cert names and getting the master able to talk to itself. my puppet.conf looks like this: [main] logdir = /var/log/puppet rundir = /var/run/puppet vardir = /var/lib/puppet ssldir = $vardir/ssl pluginsync = true environment = production report = true certname = master When I start the puppetmaster process the ssl directory looks like: ssl/private_keys/master.pem ssl/crl.pem ssl/public_keys/master.pem ssl/ca/ca_crl.pem ssl/ca/signed/master.pem ssl/ca/ca_crt.pem ssl/ca/ca_pub.pem ssl/ca/ca_key.pem ssl/certs/ca.pem ssl/certs/master.pem I have an /etc/hosts entry on the box to point the 'puppet' hostname to localhost so that I don't have to change the 'server' option. When I run the agent I get the following: # puppet agent --test info: Retrieving plugin err: /File[/var/lib/puppet/lib]: Failed to generate additional resources using 'eval_generate: Server hostname 'puppet' did not match server certificate; expected master err: /File[/var/lib/puppet/lib]: Could not evaluate: Server hostname 'puppet' did not match server certificate; expected master Could not retrieve file metadata for puppet://puppet/plugins: Server hostname 'puppet' did not match server certificate; expected master err: Could not retrieve catalog from remote server: Server hostname 'puppet' did not match server certificate; expected master warning: Not using cache on failed catalog err: Could not retrieve catalog; skipping run err: Could not send report: Server hostname 'puppet' did not match server certificate; expected master If I specify the certname as the server (with corresponding hosts entry) I get: # puppet agent --test --server master info: Retrieving plugin err: /File[/var/lib/puppet/lib]: Could not evaluate: Could not retrieve information from environment production source(s) puppet://master/plugins info: Caching catalog for master info: Applying configuration version '1321805956' notice: Finished catalog run in 0.05 seconds Which is success of a sort, that source error will bite me later when I'm applying manifests. I've tried a couple of other variations with using the ec2 private hostname and gotten mixed results. I'd like to avoid setting server = 'x' and use dns/hosts to control what 'puppet' resolves to in order to decide which server (plays easier with availability zones, etc)

  Read the article

• Prevent Cisco VPN from interrupting home networking

  - by jkohlhepp

  I just got a new laptop, and for the most part have left its settings alone. Today I was trying to get some sharing going between my desktop and the laptop. Both machines are connected to the same wireless network and both machines consider that network to be a Home network. Both are running Win7 Home Premium. It seems like my laptop is aware of my desktop on the network. It can ping it by IP or by computer name. When I go to Network from the laptop, I can see the desktop in the list of computers. However, my desktop cannot ping the laptop, nor can it see it within Network. My desktop has a Homegroup set up, but my laptop says "There is currently no homegroup on the network". I do have network discovery turned on for both machines. Why can my desktop not "talk" to my laptop but it works the other way around? Update: Disabling the Windows Firewall on the laptop somewhat fixes the problem. With it disabled, my desktop can ping my laptop, but still my laptop can't see the homegroup. Also, it can ping via hostname, which resolves to IPv6, but can't ping via the IPv4 address. Obviously I'd rather not leave my firewall disabled, so I need a more specific fix. Update 2: Aha! It is the Cisco VPN software I was running to connect to work computers. Once I disconnected and exited from that, the two PCs seemed to be talking normally and the homegroup was visible to the laptop. So now my question has morphed: how can I prevent Cisco VPN from interrupting my home networking?

  Read the article

• Need a VM for running a PHP Sandbox

  - by Phani

  I am working on Web application honeypot. It collects PHP files it receives (as part of an RFI attack) and runs them in order to return the result back to the attacker. The aim is to coax the bad guy into going further into his attack. Based on the answers to my SO question, I am looking at using VMs for running the PHP Sandbox. The honeypot itself consists of Python code and will be running in a Linux environment (preferably Ubuntu-like). These are some of the requirements: The VM should be a light weight as possible. We are going to distribute the code around and many people are going to use the VM along with the Python based honeypot. So, the installation and configuration should not be too difficult. The guest system would also be Linux as we are going to distribute the VM image around. It should be possible for the Python code outside to talk to the guest system. It would be passing on the PHP file to the guest system and will get the output result from it. It should be possible to automate the initial configuration of the VM (such as allocation of RAM etc.) I would like to randomize these settings in order to make the sandbox less 'fingerprintable' I have looked at OpenVZ and KVM so far. Are there any other VMs that I might look at? What do you recommend?

  Read the article

• DIY NAS - links for Instructions

  - by Kaushik Gopal

  Good folk of SU, I'm planning to build a NAS (Network Access Storage). I'm planning to do it cheap (:read Old PC Config + Open source software). I was looking for good DIY links . Before you shoot this down as a Repost, I'm only looking for good links containing detailed instructions for setting up a NAS. I did a fair bit of searching and found these links (so please suggest others. While these links are great they delve more on the hardware side, i'm looking for more instructions in the software side). For the sake of the interwebs: Ubuntu: http://snarfquest.com/wiki/index.php/Setting_up_a_Home_NAS http://www.smallnetbuilder.com/content/view/27962/77/ http://jonpeck.blogspot.com/2006/11/how-to-configure-80-fileserver-in-45.html FreeNAS http://www.smallbusinesscomputing.com/webmaster/article.php/3719706 http://www.codeproject.com/KB/system/homemade_nas.aspxhttp://www.codeproject.com/KB/system/homemade_nas.aspx There was one at rubbervir.us that everyone points to, but apparently the site has gone down. A couple of other queries: Is Printer/Scanner sharing a possibility with NAS devices? Many talk of torrent support with NAS Devices, a little more light on this? Does this mean, an auto download of torrent through a feed into NAS, or just support for storing Torrent download files onto the NAS(don't see the difference between the latter and a normal file tranfer)

  Read the article

• Multiple vlans access to shared pbx system

  - by Matt

  I'm new to networking and was looking for some assistance. First off I'm using packet tracer to diagram my scenario as I will be receiving my equipment next week to deploy. Hardware to be used: 2 catalyst 3560 switches all connect to a sonic wall router I have two companies that work in the same office space. I need to keep these companies separate on their own vlan. They will however need to share the phone system. (Packet tracer file uploaded to give those who have the time to see what I put together.) http://dl.dropbox.com/u/86234623/network%20build.pkt Here is my current test scenario: on switch 0 I have: company A on vlan 2 computers 172.16.1.100 and 101 255.255.0.0 FA0/10 FA0/11 company B on vlan 3 computers 172.16.2.102, 255.255.0.0 FA0/12 PBX on a trunk port 172.16.0.5, 255.255.0.0 FA0/5 trunk port on FA0/1 to connect the switches on switch 1 I have: company A on vlan 2 computers 172.16.1.102, 255.255.0.0 company B on vlan 3 computers 172.16.2.100 and 101, 255.255.0.0 trunk port on FA0/1 to connect the switches I can ping the respective computers on the same vlan but cant ping company A to B which is what I want. However neither company can talk (ping) the PBX. Here are the commands I used to configure what I have: switch 0 en conf t vlan 2 name A vlan 3 name B int fa0/10 switchport mode access switchport access vlan 2 int fa0/11 switchport mode access switchport access vlan 2 int fa0/12 switchport mode access switchport access vlan 3 int fa0/5 switchport trunk encapsulation dot1q switchport mode trunk switchport trunk allowed vlan 1-3 int fa0/1 (to connect the switches) switchport trunk encapsulation dot1q switchport mode trunk switchport trunk allowed vlan 1-3 Switch 1 en conf t vlan 2 name A vlan 3 name B int fa0/10 switchport mode access switchport access vlan 3 int fa0/11 switchport mode access switchport access vlan 3 int fa0/12 switchport mode access switchport access vlan 2 int fa0/1 (to connect the switches) switchport trunk encapsulation dot1q switchport mode trunk switchport trunk allowed vlan 1-3

  Read the article

• VPN Device behind router/firewall

  - by David Steven

  ROUTER A: Peplink 310 serving as the gateway/router/firewall at one location. ROUTER B: Linksys RV082 serving as the gateway/router/firewall at another location. I want to VPN these two locations together. The Peplink has a PPTP server and has proprietary site-to-site vpn if you had another peplink device. The Linksys has an IPsec vpn server. VPN A: I also have another spare linksys rv082. I'm trying to setup the other rv082 (VPN A) behind the peplink (ROUTER A) and get VPN A to talk to ROUTER B. I setup VPN A with a lan ip address and plugged one of it's LAN ports into the LAN. I was able to get to it's web interface fine. On ROUTER A I one-to-one nat mapped one of our public ip's to the LAN IP for VPN A. I opened TCP 50-51 and UDP 500 to VPN A. I configured the VPN settings on VPN A to connect to ROUTER B. I did the opposite for ROUTER B. But the vpn doesn't connect. Then I tried pluging VPN A's wan port into the lan, and gave it another LAN IP. I thought perpahs VPN A didn't want to send VPN traffic out over the LAN and wanted do send it over it's WAN. The vpn still doesn't connect. It what I'm trying to do even possible?

  Read the article

• Outlook slow to open attachments

  - by Alistair McMillan

  When a colleague tries to open attachments in her email (Outlook 2003 talking to an Exchange 2007 server) they talk ages to open. The files are relatively small, all less than 1MB. We've tried creating a new Windows profile for the user and tried creating new Outlook profiles, however that hasn't made any difference. And we've tried accessing her account from someone else's PC, and the attachments open immediately there. The only thing that might provide a clue is that Process Monitor shows Outlook on her PC trying to write the file to a folder within the user's "Temporary Internet Files" folder with FAST I/O DISALLOWED errors. Can't find a lot of useful information on that message online though. What causes the FAST I/O DISALLOWED errors? And would that make opening attachments so incredibly slow that opening a < 1MB file can take a matter of minutes? UPDATE: Discovered that this isn't just an issue with Outlook. Other files being accessed over the network show the same FAST I/O DISALLOWED errors in Process Monitor. The problem is just more noticeable with Outlook, because although other applications take a while to open files it isn't a matter of minutes.

  Read the article

• Windows 7 disk backup and clone for deployment to multiple systems

  - by gregmac

  I'm in the process of deploying some new PCs (there's only 8), all identical hardware. What I'd like to do is install Windows 7 (64bit), join to domain etc, install a bunch of other software, and then clone that drive to multiple other machines. I'd also like to be able to use it as a backup image, so the machine can be restored back to that image at some future date. I understand this involves at least sysprep, but I am confused after reading some tutorials that talk about using Windows Automated Installation Kit, or hacks with the registry and custom-build batch files. This process seems overly complex to me: I did something similar 10+ years ago, and and don't remember it being this bad. Surely things have improved in a decade? There's also some products that involve having network servers running deployment software, network boot, etc etc.. this is way more than I want to set up. My systems are all identical hardware. Is there a simplified way to clone PCs? Preferably (since I'm a lazy developer, and not an IT admin) I'd like to find some off-the-shelf product that I can run after I get the machine setup, that will spit out a bootable DVD I can run on all the other systems, which will boot up, ask for a computer name, join it to the domain, and that's it. Does such as product exist?

  Read the article

< Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >