Search Results

Search found 10710 results on 429 pages for 'release candidate'.

Page 341/429 | < Previous Page | 337 338 339 340 341 342 343 344 345 346 347 348  | Next Page >

• Tunnel is up but cannot ping directly connected network

  - by drmanalo

  We configured a site-to-site VPN and here is the topology. I control the network on the left but not the one on the right. All devices in our network has public IPs. Server---ASA5505---Cisco887======Internet=====ASA5510---devices I can see the tunnel is up and can do extended ping using a loopback interface. From the 10.175 and 10.165 networks, they can also ping my loopback address. I can also dial in using a Cisco VPN client, and can connect to the devices on the right. #show crypto session Crypto session current status Interface: Vlan3 Profile: xxx-profile Session status: UP-ACTIVE Peer: 213.121.x.x port 500 IKEv1 SA: local 77.245.x.x/500 remote 213.121.x.x/500 Active IPSEC FLOW: permit ip 10.0.20.0/255.255.255.240 10.175.0.0/255.255.128.0 Active SAs: 0, origin: crypto map IPSEC FLOW: permit ip 10.0.20.0/255.255.255.240 10.165.0.0/255.255.192.0 Active SAs: 2, origin: crypto map #ping 10.165.29.39 source loopback 2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.165.29.39, timeout is 2 seconds: Packet sent with a source address of 10.0.20.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 16/17/20 ms My problem is the devices on the right cannot reach my server. They could only ping the loopback address and nothing else. I'm pasting some diagnostics related to routing thinking perhaps routing is my issue. I can paste all the running-config on my side of network if needed. #show ip int brief Interface IP-Address OK? Method Status Protocol ATM0 unassigned YES NVRAM administratively down down Ethernet0 unassigned YES NVRAM administratively down down FastEthernet0 unassigned YES unset up up connected to ASA FastEthernet1 unassigned YES unset administratively down down FastEthernet2 unassigned YES unset administratively down down FastEthernet3 unassigned YES unset up up Loopback1 10.0.20.65 YES NVRAM up up Loopback2 10.0.20.1 YES NVRAM up up Virtual-Template1 77.245.x.x YES unset up down Virtual-Template2 77.245.x.x YES unset up down Vlan1 unassigned YES unset down down Vlan3 77.245.x.x YES NVRAM up up connected to the Internet #show run | section ip route ip route 0.0.0.0 0.0.0.0 77.245.x.x ip route 213.121.240.36 255.255.255.255 Vlan3 #show access-list Extended IP access list 102 10 permit ip 10.0.20.0 0.0.0.15 10.175.0.0 0.0.127.255 (3332 matches) 20 permit ip 10.0.20.0 0.0.0.15 10.165.0.0 0.0.63.255 (3498 matches) #show vlan-switch VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active 3 VLAN0003 active Fa0, Fa1, Fa2, Fa3 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup #show ip route Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP + - replicated route, % - next hop override Gateway of last resort is 77.245.x.x to network 0.0.0.0 S* 0.0.0.0/0 [1/0] via 77.245.x.x 10.0.0.0/8 is variably subnetted, 5 subnets, 3 masks C 10.0.20.0/28 is directly connected, Loopback2 L 10.0.20.1/32 is directly connected, Loopback2 C 10.0.20.64/28 is directly connected, Loopback1 L 10.0.20.65/32 is directly connected, Loopback1 S 10.165.0.0/18 [1/0] via 213.121.x.x 77.0.0.0/8 is variably subnetted, 3 subnets, 3 masks S 77.0.0.0/8 [1/0] via 77.245.x.x C 77.245.x.x/29 is directly connected, Vlan3 L 77.245.x.x/32 is directly connected, Vlan3 213.121.x.0/32 is subnetted, 1 subnets S 213.121.x.x is directly connected, Vlan3 I read some of the posts here which lead to NATing issue but I'not sure of my next step. Should I translate my public address to private and route it to the loopback address? (only guessing) CISCO VPN site to site Site-to-Site VPN between two ASA 5505s only working in one direction Hope someone could help. Thanks in advance!

  Read the article

• Oracle AIM, Oracle ABF, and Siebel Results Roadmap Officially Retired as of January 31, 2011

  - by tom.spitz

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} It seems somehow appropriate that the first entry of the Oracle® Unified Method (OUM) blog is about the retirement of several of our legacy methods, most notably AIM Foundation.If you're reading this, you're probably aware that Oracle has been developing OUM to support the entire Enterprise IT lifecycle, including support for the successful implementation of every Oracle product. As Oracle has continued to acquire new companies and technologies, it has become essential that we also create a single, unified language and approach for implementation - across the Oracle ecosystem.With the release of OUM 5.1 in 2009, OUM provided full support for all enterprise application implementation projects including Oracle E-Business Suite R12, Siebel CRM, PeopleSoft Enterprise, and JD Edwards EnterpriseOne projects. In 2010, we released OUM training that supports the use of OUM on these types of projects.That support represented a major milestone in the evolution of OUM and enabled implementers to transition to OUM. Consequently, we announced a staggered retirement schedule for Oracle's legacy methods. On January 31, 2011 we announced the retirement of:Oracle Application Implementation Method (AIM)Oracle AIM for Business Flows (ABF)Siebel Results RoadmapLater this year, we will announce the retirement of Compass - the legacy PeopleSoft method - and Data Warehouse Method Fast Track.OUM is available free of charge to Oracle Gold, Platinum, and Diamond partners through the Oracle Partner Network (OPN) [OUM on OPN]. The OUM Customer Program allows customers to obtain copies of the method for their internal use by contracting with Oracle for an engagement of two weeks or longer meeting some additional minimum criteria.There be more retirement announcements in the coming months. For now it's "Adios AIM." Thanks for the memories...

  Read the article

• Silverlight Cream for April 20, 2010 -- #842

  - by Dave Campbell

  In this Issue: Zoltan Arvai, Svetla Stoycheva, Alexey Zakharov, Chris Rouw, David Anson(-2-), Bill Reiss, John Papa and Adam Kinney, Chris Klug, CorrinaB, and Mike Snow. Shoutouts: Pete Brown interviewed David Kelley at MIX10: Pete at MIX10: David Kelley on the Prototype WPF and Silverlight Retail Experience Pete Brown also interviewed Emil Stoychev at MIX10: Pete at MIX10: Emil Stoychev on the CompletIT Silverlight Site SilverlightShow has a MIX10 Review by SilverlightShow Live Reporter Cigdem Patlak SilverlightShow also has an Interview with SilverlightShow Article Author Andrej Tozon From SilverlightCream.com: Implementing Push Notifications in Windows Phone 7 Zoltan Arvai has a post up on SilverlightShow discussing Push Notification on WP7 ... what it is, and how to use it. Completit.com - the challenges behind building a corporate website in Silverlight Svetla Stoycheva shows off the new CompleteIT corporate website which is pretty darn cool... and disucusses some of the challenges and solutions Introducing to Halcyone - Silverlight Application Framework: Silverlight Rest Extensions Alexey Zakharov has a tutorial up on a Silverlight application framework he's working on called Halcyone which is available on CodePlex Using the Tag Property during Silverlight Binding Chris Rouw details his SL3 to SL4 conversion and some issues he had, and how he was able to resolve a binding problem using the tag property. Using ContextMenu to implement SplitButton and MenuButton for Silverlight (or WPF) David Anson has a cool discussion up of using the ContextMenu code he put up previously to build a Split button, and includes all the code as usual. Silverlight/WPF Data Visualization Development Release 4 and Windows Phone 7 Charting sample! David Anson updated his Data Visualization because of the new releases, and this time he's including WP7... charting in WP7... ! Space Rocks game step 10: More fun with rocks In episode 10, Bill Reiss shows how to deal with multiple asteroids and all the interaction. Silverlight Training Course (Silverlight 4) Get your serious Silverlight 4 Mojo on with a new SL4 Training kit on Channel 9 ... buncha folks, spearheaded (it looks like) by John Papa and Adam Kinney... Plug-ins and composite applications in Silverlight – pt 3 Chris Klug is back with part 3 of his series on extensions and plug-in loading. So far he's covered a roll-your-own concept and MEF, now he digs into Prism. Transitions, Animations, and Effects with Blend - Part One How cool to have CorrinaB speak at your User Group meeting! ... She did just that in Portland, and instead of simply dropping a deck and some code in her blog, she's giving the run-down on her presentation... always good stuff, Corrina! Tip of the Day #110 – Using Static Resources in Class Libraries Mike Snow's latest tip is about how to create and use a Resource Dictionary. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Oracle VM Deep Dives

  - by rickramsey

  "With IT staff now tasked to deliver on-demand services, datacenter virtualization requirements have gone beyond simple consolidation and cost reduction. Simply provisioning and delivering an operating environment falls short. IT organizations must rapidly deliver services, such as infrastructure-as-a-service (IaaS), platform-as-a-service (PaaS), and software-as-a-service (SaaS). Virtualization solutions need to be application-driven and enable:" "Easier deployment and management of business critical applications" "Rapid and automated provisioning of the entire application stack inside the virtual machine" "Integrated management of the complete stack including the VM and the applications running inside the VM." Application Driven Virtualization, an Oracle white paper That was published in August of 2011. The new release of Oracle VM Server delivers significant virtual networking performance improvements, among other things. If you're not sure how virtual networks work or how to use them, these two articles by Greg King and friends might help. Looking Under the Hood at Virtual Networking by Greg King Oracle VM Server for x86 lets you create logical networks out of physical Ethernet ports, bonded ports, VLAN segments, virtual MAC addresses (VNICs), and network channels. You can then assign channels (or "roles") to each logical network so that it handles the type of traffic you want it to. Greg King explains how you go about doing this, and how Oracle VM Server for x86 implements the network infrastructure you configured. He also describes how the VM interacts with paravirtualized guest operating systems, hardware virtualized operating systems, and VLANs. Finally, he provides an example that shows you how it all looks from the VM Manager view, the logical view, and the command line view of Oracle VM Server for x86. Fundamental Concepts of VLAN Networks by Greg King and Don Smerker Oracle VM Server for x86 supports a wide range of options in network design, varying in complexity from a single network to configurations that include network bonds, VLANS, bridges, and multiple networks connecting the Oracle VM servers and guests. You can create separate networks to isolate traffic, or you can configure a single network for multiple roles. Network design depends on many factors, including the number and type of network interfaces, reliability and performance goals, the number of Oracle VM servers and guests, and the anticipated workload. The Oracle VM Manager GUI presents four different ways to create an Oracle VM network: Bonds and ports VLANs Both bond/ports and VLANS A local network This article focuses the second option, designing a complex Oracle VM network infrastructure using only VLANs, and it steps through the concepts needed to create a robust network infrastructure for your Oracle VM servers and guests. More Resources Virtual Networking for Dummies Download Oracle VM Server for x86 Find technical resources for Oracle VM Server for x86 -Rick Follow me on: Blog | Facebook | Twitter | Personal Twitter | YouTube | The Great Peruvian Novel

  Read the article

• ORM Profiler v1.1 has been released!

  - by FransBouma

  We've released ORM Profiler v1.1, which has the following new features: Real time profiling A real time viewer (RTV) has been added, which gives insight in the activity as it is received by the client, in two views: a chronological connection overview and an activity graph overview. This RTV allows the user to directly record to a snapshot using record buttons, pause the view, mark a range to create a snapshot from that range, and view graphs about the # of connection open actions and # of commands per second. The RTV has a 'range' in which it keeps live data and auto-cleans data that's older than this range. Screenshot of the activity graphs part of the real-time viewer: Low-level activity tab A new tab has been added to the Application tabs: the Low-level activity tab. This tab shows the main activity as it has been received over the named pipe. It can help to get insight in the chronological activity without the grouping over connections, so multiple connections at the same time per thread are easier to spot. Clicking a command will sync the rest of the application tabs, clicking a row will show the details below the splitter bar, as it is done with the other application tabs as well. Default application name in interceptor When an empty string or null is passed for application name to the Initialize method of the interceptor, the AppDomain's friendly name is used instead. Copy call stack to clipboard A call stack viewed in a grid in various parts of the UI is now copyable to the clipboard by clicking a button. Enable/Disable interceptor from the config file It's now possible to enable/disable the interceptor Initialization from the application's config file, using: Code: <appSettings> <add key="ORMProfilerEnabled" value="true"/> </appSettings> if value is true, the interceptor's Initialize method will proceed. If the value is false, the interceptor's Initialize method will not proceed and initialization won't be performed, meaning no interception will take place. If the setting is absent, or misconfigured, the Initialize method will proceed as normal and perform the initialization. Stored procedure calls for select databases are now properly displayed as a call For the databases: SQL Server, Oracle, DB2, Sybase ASA, Sybase ASE and Informix a stored procedure call is displayed as an execute/call statement and copy to clipboard works as-is. I'm especially happy with the new real-time profiling feature in ORM Profiler, which is the flagship feature for this release: it offers a completely new way to use the profiler, namely directly during debugging: you can immediately see what's going on without the necessity of a snapshot. The activity graph feature combined with the auto-cleanup of older data, allows you to keep the profiler open for a long period of time and see any spike of activity on the profiled application.

  Read the article

• Running Windows Phone Developers Tools CTP under VMWare Player - Yes you can! - But do you want to?

  - by Liam Westley

  This blog is the result of a quick investigation of running the Windows Phone Developer Tools CTP under VMWare Player.  In the release notes for Windows Phone Developer Tools CTP it mentions that it is not supported under VirtualPC or Hyper-V.  Some developers have policies where ‘no non-production code’ can be installed on their development workstation and so the only way they can use a CTP like this is in a virtual machine. The dilemma here is that the emulator for Windows Phone itself is a virtual machine and running a virtual machine within another virtual machine is normally frowned upon.  Even worse, previous Windows Mobile emulators detected they were in a virtual machine and refused to run.  Why VMWare? I selected VMWare as a possible solution as it is possible to run VMWare ESXi under VMWare Workstation by manually setting configuration options in the VMX configuration file so that it does not detect the presence of a virtual environment. I actually found that I could use VMWare Player (the free version, that can now create VM images) and that there was no need for any editing of the configuration file (I tried various switches, none of which made any difference to performance). So you can run the CTP under VMWare Player, that’s the good news. The bad news is that it is incredibly slow, bordering on unusable.  However, if it’s the only way you can use the CTP, at least this is an option. VMWare Player configuration I used the latest VMWare Player, 3.0, running under Windows x64 on my HP 6910p laptop with an Intel T7500 Dual Core CPU running at 2.2GHz, 4Gb of memory and using a separate drive for the virtual machines. I created a machine in VMWare Player with a single CPU, 1536 Mb memory and installed Windows 7 x64 from an ISO image.  I then performed a Windows Update, installed VMWare Tools, and finally the Windows Phone Developer Tools CTP After a few warnings about performance, I configured Windows 7 to run with Windows 7 Basic theme rather than use Aero (which is available under VMWare Player as it has a WDDM driver). Timings As a test I first launched Microsoft Visual Studio 2010 Express for Windows Phone, and created a default Windows Phone Application project.  I then clicked the run button, which starts the emulator and then loads the default application onto the emulator. For the second test I left the emulator running, stopped the default application, added a single button to change the page title and redeployed to the already running emulator by clicking the run button.   Test 1 (1st run) Test 2 (emulator already running)   VMWare Player 10 minutes  1 minute   Windows x64 native 1 minute  < 10 seconds   Conclusion You can run the Windows Phone Developer Tools CTP under VMWare Player, but it’s really, really slow and you would have to have very good reasons to try this approach. If you need to keep a development system free of non production code, and the two systems aren’t required to run simultaneously, then I’d consider a boot from VHD option.  Then you can completely isolate the Windows Phone Developer Tools CTP and development environment into a single VHD separate from your main development system.

  Read the article

• JavaFX 2.0 at Devoxx 2011

  - by Janice J. Heiss

  JavaFX Sessions Abound JavaFX had a big presence at Devoxx 2011 as witnessed by the number of sessions this year given by leading JavaFX movers and shakers.     “JavaFX 2.0 -- A Java Developer's Guide” by Java Champions Stephen Chin and Peter Pilgrim     “JavaFX 2.0 Hands On” by Jasper Potts and Richard Bair     “Animation Bringing your User Interfaces to Life” by Michael Heinrichs and John Yoong (JavaFX development team)     “Complete Guide to Writing Custom Bindings in JavaFX 2.0” by Michael Heinrichs (JavaFX development team)     “Java Rich Clients with JavaFX 2.0” by Jasper Potts and Richard Bair     “JavaFX Properties & Bindings for Experts” (and those who want to become experts) by Michael Heinrichs (JavaFX development team)     “JavaFX Under the Hood” by Richard Bair     “JavaFX Open Mic” with Jasper Potts and Richard Bair With the release of JavaFX 2.0 and Oracle’s move towards an open development model with an open bug database already created, it’s a great time for developers to take the JavaFX plunge. One Devoxx attendee, Mark Stephens, a developer at IDRsolutions blogged about a problem he was having setting up JavaFX on NetBeans to work on his Mac. He wrote: “I’ve tried desperate measures (I even read and reread the instructions) but it did not help. Luckily, I am at Devoxx at the moment and there seem to be a lot of JavaFX gurus here (and it is running on all their Macs). So I asked them… It turns out that sometimes the software does not automatically pickup the settings like it should do if you give it the JavaFX SDK path. The solution is actually really simple (isn’t it always once you know). Enter these values manually and it will work.” He simply entered certain values and his problem was solved. He thanked Java Champion Stephen Chin, “for a great talk at Devoxx and putting me out of my misery.” JavaFX in Java Magazine Over in the November/December 2011 issue of Java Magazine, Oracle’s Simon Ritter, well known for his creative Java inventions at JavaOne, has an article up titled “JavaFX and Swing Integration” in which he shows developers how to use the power of JavaFX to migrate Swing interfaces to JavaFX. The consensus among JavaFX experts is that JavaFX is the next step in the evolution of Java as a rich client platform. In the same issue Java Champion and JavaFX maven James Weaver has an article, “Using Transitions for Animation in JavaFX 2.0”. In addition, Oracle’s Vice President of Java Client Development, Nandini Ramani, provides the keys to unlock the mysteries of JavaFX 2.0 in her Java Magazine interview. Look for the JavaFX community to grow and flourish in coming years.

  Read the article

• .NET development on a “Retina” MacBook Pro

  - by Jeff

  The rumor that Apple would release a super high resolution version of its 15” laptop has been around for quite awhile, and one I watched closely. After more than three years with a 17” MacBook Pro, and all of the screen real estate it offered, I was ready to replace it with something much lighter. It was a fantastic machine, still doing 6 or 7 hours after 460 charge cycles, but I wanted lighter and faster. With the SSD I put in it, I was able to sell it for $750. The appeal of higher resolution goes way back, when I would plug into a projector and scale up. Consolas, as it turns out, is a nice looking font for code when it’s bigger. While I have mostly indifference for iOS, I have to admit that a higher dot pitch on the iPhone and iPad is pretty to look at. So I ordered the new 15” “Retina” model as soon as the Apple Store went live with it, and got it seven days later. I’ve been primarily using Parallels as my VM of choice from OS X for about five years. They recently put out an update for compatibility with the display, though I’m not entirely sure what that means. I figured there would have to be some messing around to get the VM to look right. The combination that seems to work best is this: Set the display in OS X to “more room,” which is roughly the equivalent of the 1920x1200 that my 17” did. It’s not as stunning as the text at the default 1440x900 equivalent (in OS X), but it’s still quite readable. Parallels still doesn’t entirely know what to do with the high resolution, though what it should do is somehow treat it as native. That flaw aside, I set the Windows 7 scaling to 125%, and it generally looks pretty good. It’s not really taking advantage of the display for sharpness, but hopefully that’s something that Parallels will figure out. Screen tweaking aside, I got the base model with 16 gigs of RAM, so I give the VM 8. I can boot a Windows 7 VM in 9 seconds. Nine seconds! The Windows Experience Index scores are all 7 and above, except for graphics, which are both at 6. Again, that’s in a VM. It’s hard to believe there’s something so fast in a little slim package like that. Hopefully this one gets me at least three years, like the last one.

  Read the article

• User Experience Highlights in Siebel: Direct from George Jacob

  - by mvaughan

  By Misha Vaughan and Kathy Miedema, Oracle Applications User Experience This is the first in a series of blog posts on the user experience (UX) highlights coming in various Oracle product families. You’ll see themes around productivity and efficiency, as well as a thoughtful approach to pushing UX capabilities into the underlying tooling. Of course, you can also expect to get an early look at the latest mobile offerings coming through these product lines.Today’s post is on Siebel. To learn more about what’s ahead, attend Siebel OpenWorld presentations. Our first interview is with George Jacob, the Group Vice President for CRM Applications. George Jacob Q: How would you describe the vision you have for the user experience of Siebel? A: Contemporary: Siebel runs in all browsers and all browser-capable devices using the latest web technology standards, such as Javascript, CSS, and HTML 5.Productive: Siebel is designed for a user experience that reduces clutter and user keystrokes.User-sensitive: The user experience enables Siebel to adapt easily to site and user preferences.Q: How are the UX features you have delivered so far resonating with customers? A:  Customers are very excited about our refresh of the Siebel user interface framework; the Siebel roadmap and user interface sessions at Oracle OpenWorld last year overflowed. We have had to turn back customer requests to participate in the early adopter program because we had more than we could handle. Customers are calling this a game-changer for Siebel.Q: So the UX highlights are popular? A: Yes, the UX highlights are very popular, although to a certain extent we expected this!  Q: What’s coming in Siebel on a mobile platform? A: Our current mobile offering is based on Windows Mobile (native application), and is fairly mature (over 5 years). The new Siebel Open User Interface Framework, by virtue of working on all browsers, will run – when it is released this year – on tablets and smartphones. This is one of the reasons a number of customers are most excited about our UX changes. Views of Siebel data on mobile devices Q: What are you working on now that you think is going to be exciting to customers at OOW? A: We are working on the Siebel Open User Interface Framework, to be released this year in the Siebel 2012 8.1.1.9 & 8.2.2.2 innovation packs. We are also working on Connected Mobile applications for Sales, Service, Consumer Goods and Pharmaceuticals, and Disconnected Mobile applications for Pharmaceuticals in the same release. We are building specialized applications that exploit the new UI framework for Telco Order Capture and for Life Sciences healthcare professional visits. Our 2012 delivery will be the foundation for further user experience enhancements, next year and beyond.Q: What do you want Siebel customers to know? A:  We are excited to be focused on improving the user experience of Siebel applications, and it is encouraging to see the positive feedback from Siebel customers and partners.If you would like to see more in the Siebel user experience, be sure to check out these sessions at OpenWorld: CON9700 - Siebel CRM Overview, Strategy, and Roadmap CON9703 - User Interface Innovations with the New Siebel “Open UI” CON9705 - Unleash the Power of “Open UI” CON9697 - Mobile Solutions for Siebel CRM

  Read the article

• Product Development Investment: A Measure of Vendor Performance

  - by Jim Mcglothlin

  The relationship between a large, complex organization and its key suppliers of information technology is normally more than just "strategic". Expectations about the duration of the relationship typically exceed 20 years. Enterprise applications and technology infrastructure are not expected to be changed out like petunias. So how would you rate the due diligence processes as performed in Higher Education when selecting critical, transformational information technology? My observation: I see a lot of effort put into elaborate demonstration of basic software functionality. I see a lot of attention paid to the cost element of technology acquisition, including the contracted cost of implementation consulting services. But the factor that receives only cursory analysis and due diligence is long-term performance--the ability of a vendor to grow, expand, and develop, and bring its customers along with it. So what should you look for in a long-term IT supplier? Oracle has a public track record for product development. The annual investment has been on a run rate of almost $3 Billion organic product development. Oracle's well-publicized acquisitions and mergers have been supplemental to its R&D. This is important for Higher Education. Another meaningful way to evaluate a company is to look at the tangible track record of enhancement. Consider the Oracle-PeopleSoft enterprise business platform since acquired by Oracle 6 years ago: Product or Technology Enhancement Customer or User Impact Service Oriented Architecture (SOA) 300+ new web services delivered in versions 9.0 & 9.1 provide flexibility, so that customers can integrate PeopleSoft with other applications. Campus Solutions has added Admissions and Constituent Web Services. Constituent Relationship Management PeopleSoft CRM 9.1 for Higher Education introduced new process flows for student recruiting and retention to support "Student Success" initiatives. A 360 view of the constituent is now delivered, and the concept of a single-stop Student Services Center is now in CRM 9.1 with tight integration to PeopleSoft Campus Solutions. Human Capital Management Contract Pay for Education, with flexibility for configuration and calculation, has been extended in HCM 9.1. New chartfield integration among Project Costing - Time & Labor - Payroll to serve the labor distribution requirements for Grants / Sponsored Research. Talent Management PeopleSoft 9.0 and 9.1 feature an integrated talent management approach centered on definitions in "Profile Manager", with all new usability improvements. Internal and external candidate pools, and the entire recruitment process, are driven by delivered configurable selection and on-boarding processes. Interview scheduling, and online job offers are newly delivered processes. Performance Management PeopleSoft HCM ePerformance 9.1 will include significant new functionality designed to help organizations more effectively align business objectives with employee goals. Using an Organization Chart view, your business goals can flow down to become tangible objectives per employee. Succession Planning / Workforce Development New in HCM 9.0, enhanced in 9.1, is a planning capability for regular or unusual (major organizational change) succession of internal or external candidates. PeopleSoft supports employee-based career planning, which ultimately increases the integrity of the succession planning process (identify their career needs, plans, preferences, and interests). Dashboards / Oracle Business Intelligence Application Suite Oracle Human Resources Analytics provides the workforce information foundation that integrates data from HR functional areas and Finance. Oracle Human Resources Analytics delivers 9 dashboards and over 200 reports. Provide your HR professionals and front-line managers the tools to analyze workforce staffing, retention, productivity, to better source high-quality applicants, and to reduce absence costs. Multi-year Planning and Commitment Control External funding sources, especially Grants, require a multi-year encumbrance business process. PeopleSoft HCM 9.1 adds multi-year funding and commitment control, including budget checking. The newly designed Real Time Budget Checking will provide the customer with an updated snapshot of their budget and encumbrances at any given time. Position Budgeting with Hyperion Hyperion Planning world-class products now include delivered integration to PeopleSoft HCM. Position Budgeting is available in the new Public Sector Planning module of Hyperion. Web 2.0 features for the latest in usability PeopleSoft 9.1 features a contemporary internet user experience: Partial-page refreshing Drag and drop pagelets New menu structure Navigation pagelets Modal popup message windows Favorites & recently used links Type-ahead Drag and drop grid columns, pop-out grids Portal Workspaces Enterprise 2.0 for your collaborative web communities, using new content management, along with Wikis, blogs, and discussion forums in PeopleSoft Portal 9.1. PeopleTools enhanced by Oracle Fusion Middleware Standards-based tools have been added to the PeopleTools application infrastructure: BI (XML) Publisher, Java tools. Certified for use with PeopleSoft: Oracle Business Intelligence (OBIEE), Oracle Enterprise Manager, Oracle Weblogic Server, Oracle SOA Suite. Hosting for PeopleSoft applications A solid new deployment option: Oracle On Demand remote hosting center for high scalability, security, and continuity of operations. Business Process Outsourcing (BPO) for HCM / Payroll functions Partnership with AT&T provides hosting of HR/Payroll application along with payroll business process operations, and subscription-based service fees (SaaS). AT&T BPO full service includes pay sheet processing, bank and 3rd party file transfer, payroll tax handling, etc. Continuous Delivery Model Feature Packs provide faster time-to-benefit; new features become available in PeopleSoft 9.1 (or Campus Solutions 9.0) without need to perform upgrade. Golden person data model across all campus applications Oracle Higher Education Constituent Hub provides synchronization and data governance of person data across any application, e.g. HR/ Payroll, Student Information System, Housing, Emergency Contact, LMS, CRM. Oracle's aggressive enhancement plans within the "Applications Unlimited" program continue, as new functionality is under development for a new version of a PeopleSoft release planned for 2012. Meanwhile, new capabilities are planned on an annual basis in Feature Packs. PeopleSoft just delivered the HCM 2010 Feature Pack and another is planned for 2011. In February we plan to have over 100 customers from our Customer Advisory Boards at our PeopleSoft Development Center in California to review designs for all of these releases. For those of you near New York City The investment and progressive development story described above is the subject of an Oracle road show event on February 9, 2011. Charting Your Course with Oracle Applications is a global event series designed to help business and IT executives assess the impact of new inflection points on their business and applications roadmap: changing workforces, shifting customer and constituent bases, and increased volatility. Learn how innovations ranging from new deployment models like cloud computing to the introduction of social applications and smart devices are delivering results across all areas of business and industry. THIS DOCUMENT IS FOR INFORMATIONAL PURPOSES ONLY AND MAY NOT BE INCORPORATED INTO A CONTRACT OR AGREEMENT.

  Read the article

• Week in Geek: IPv6 Capable Smartphones Compromise User Privacy Edition

  - by Asian Angel

  This week we learned how to “clone a disk, resize static windows, and create system function shortcuts”, use 45 different services, sites, and apps to help read favorite sites, add MP3 support to Audacity (for saving in MP3 format), install a Wii game loader for easy backups and fast load times, create a Blue Screen of Death in any color, and more. Photo by legofenris. Weekly News Links Photo by The H Security. IPv6: Smartphones compromise users’ privacy Since version 4 of the iOS operating system, Apple’s iPhones, iPads and iPods have been capable of handling IPv6, and most Android devices have been capable since version 2.1. However, the operating systems transfer an ID that discloses information about their users. Dumb phones can be attacked too Much of the discussion of security threats to mobile phones revolves around smartphones, but researchers have found that less advanced “feature phones,” still used by the majority of people around the world, also are vulnerable to attack. SCADA exploit – the dragon awakes The recent publication of an exploit for KingView, a software package for visualising industrial process control systems, appears to be having an effect. Threatpost reports that both the Chinese vendor Wellintech and Chinese CERT (CN-CERT) have now reacted. Sophos: Spam to get more malicious Spam is becoming more malicious in nature as trickery tactics change in line with current user interests, according to a new report released Tuesday by Sophos. Global spam traffic rebounds as Rustock wakes Spam is on the rise after the Rustock botnet awoke from its Christmas slumber, according to Symantec. Cracking WPA keys in the cloud At the forthcoming Black Hat conference, blogger Thomas Roth plans to demonstrate how weak WPA PSKs can be cracked quickly and easily using Amazon’s Elastic Compute Cloud (EC2) service. Microsoft Security Advisory: Vulnerability in Internet Explorer could allow remote code execution Provides a link to more details about the vulnerability and shows a work-around/fix for the problem. Adobe plans to make it easier to delete Flash cookies in web browsers The new API, NPAPI:ClearSiteData, will allow Flash cookies – also known as Local Shared Objects (LSO) – to be deleted directly in the browser’s settings. Firefox beta getting new database standard The ninth beta version of Firefox is set to get support for a standard called IndexedDB that provides a database interface useful for offline data storage and other tasks needing information on a browser’s computer. MetroPCS accused of blocking certain Net content MetroPCS is violating the FCC’s recently approved Net neutrality rules by blocking certain Internet content, say several public interest groups. Server and Tools chief Muglia to leave Microsoft in summer 2011 Microsoft veteran and Server & Tools Business (STB) President Bob Muglia is leaving Microsoft, according to an email that CEO Steve Ballmer sent to employees on January 10. Report: DOJ nearing decision on Google-ITA The U.S. Department of Justice is gearing up for a possible formal antitrust investigation into whether or not Google should be allowed to purchase travel software company ITA Software, according to a report. South Korea says Google Street View broke law Police in South Korea reportedly say Google broke the country’s law when its Street View service captured personal data from unsecure Wi-Fi networks. The backlash over Google’s HTML5 video bet Choosing strategies based on what you believe to be long-term benefits is generally a good idea when running a business, but if you manage to alienate the world in the process, the long term may become irrelevant. Google answers critics on HTML5 Web video move Google responded to critics of its decision to drop support for a popular HTML5 video codec by declaring that a royalty-supported standard for Web video will hold the Web hostage. Random TinyHacker Links A Special GiveAway: a Great Book & Great Security Software The team from 7 Tutorials has a special giveaway running during the month of January. Signed copies of their latest book, full 1-year licenses of BitDefender Internet Security 2011 and free 3-month trials for everyone willing to participate. One Click Rooting For Android Phones Here’s a nice tool that helps you root your Android phone effortlessly. New Angry Birds Free version 1.0 Available in the App Store. Google Code University Learn programming at Google Code University. Capture and Share Your Favorite Part Of a YouTube Video SnipSnip.it lets you share only the part of the video that you like. Super User Questions More great questions and answers from this past week’s popular topics at Super User. What are the Windows A: and B: drives used for? Does OS X support linux-like features? What is the easiest way to make a backup of an entire hard disk? Will shifting from Wireless to Wired network result in better performance? Is it legal to install Windows 7 Home Premium Retail inside VMware virtual machine? How-To Geek Weekly Article Recap Enjoy reading through our hottest articles from this past week. The 50 Best Ways to Disable Built-in Windows Features You Don’t Want The Best of CES (Consumer Electronics Show) in 2011 How to Upgrade Windows 7 Easily (And Understand Whether You Should) The Worst of CES (Consumer Electronics Show) in 2011 The How-To Geek Guide to Audio Editing: Basic Noise Removal One Year Ago on How-To Geek More great articles from one year ago filled with helpful geeky goodness for you to enjoy. Share Text & Images the Easy Way with JustPaste.it Start Portable Firefox in Safe Mode Firefox 3.6 Release Candidate Available, Here’s How to Fix Your Incompatible Extensions Protect Your Computer from “Little Hands” with KidSafe Lock Prying Eyes Out of Your Minimized Windows Custom Crocheted Cylon-Cthulhu Hybrid What happens when you let your Cylon Centurion figure and your crocheted Cthulhu spend too many lonely nights together? A Cylon-Cthulhu hybrid, of course! You can get your own from the Cthulhu Chick store over on Etsy. Note: This is not an ad…Ruth is a friend of ours, and this Cylon-Cthulhu hybrid makes the perfect guard for the new MVP trophy in our office. The Geek Note Whether it is a geeky indoor project or just getting outside, we hope that you and your families have a terrific fun-filled weekend! Remember to keep sending those great tips in to us at [email protected]. Photo by qwrrty. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Firefox 4.0 Beta 9 Available for Download – Get Your Copy Now The Frustrations of a Computer Literate Watching a Newbie Use a Computer [Humorous Video] Season0nPass Jailbreaks Current Gen Apple TVs IBM’s Jeopardy Playing Computer Watson Shows The Pros How It’s Done [Video] Tranquil Juice Drop Abstract Wallpaper Pulse Is a Sleek Newsreader for iOS and Android Devices

  Read the article

• Using Dependency Walker

  - by Valter Minute

  Dependency Walker is a very useful tool that can be used to find dependencies of a Portable Executable module. The PE format is used also on Windows CE and this means that Dependency Walker can be used to analyze also Windows CE/Windows Embedded Compact module. On Win32 it can be used also to monitor modules loaded by an application during runtime, this feature is not supported on CE. You can download dependency walker for free here: http://dependencywalker.com/. To analyze the dependencies of a Windows CE/Windows Embedded Compact 7 module you can just open it using Dependency Walker. If you want to check if a specific module can run on a Windows CE/Windows Compact 7 OS Image you can copy the executable in the same directory that contains your OS binaries (FLATRELEASEDIR). In this way Dependency Walker will highlight missing dlls or missing entry points inside existing dlls. Let’s do a quick sample. You need to check if myapp.exe (an application from a third party) can run on an image generated with your Test01 OSDesign. Copy Myapp.exe to the flat release directory of your OS Design. Launch depends.exe and use the File\Open option of its main menu to open the application executable file you just copied. You may receive an error if some of the modules required by your applications are missing. Before you analyze the module dependencies is important to configure Dependency Walker to check DLL in the same folder where your application file is stored. This is needed because some Windows CE DLLs have the same name of Win32 system DLLs but different entry points. To configure the DLL search path select “Options\Configure Module Search Order…” from Depenency Walker main menu. Select “The application directory” from the “Current Search Order” list, select it, and move it to the top of the list using the “Move Up” button. The system will ask to refresh the window contents to reflect your configuration change, click on “Yes” to proceed. Now you can inspect myapp.exe dependencies. Some DLLs are missing (XAMLRUNTIME.DLL and TILEENGINE.DLL) and OLE32.DLL exists but does not export the “CoInitialize” entry point that is required by myapp.exe. The bad news is that MyApp.exe will not run on your OS Image, the good news is that now you know what’s missing and you can add the required modules to your OS Design and fix the problem!

  Read the article

• Attach to Process in Visual Studio

  - by Daniel Moth

  One option for achieving step 1 in the Live Debugging process is attaching to an already running instance of the process that hosts your code, and this is a good place for me to talk about debug engines. You can attach to a process by selecting the "Debug" menu and then the "Attach To Process…" menu in Visual Studio 11 (Ctrl+Alt+P with my keyboard bindings), and you should see something like this screenshot: I am not going to explain this UI, besides being fairly intuitive, there is good documentation on MSDN for the Attach dialog. I do want to focus on the row of controls that starts with the "Attach to:" label and ends with the "Select..." button. Between them is the readonly textbox that indicates the debug engine that will be used for the selected process if you click the "Attach" button. If you haven't encountered that term before, read on MSDN about debug engines. Notice that the "Type" column shows the Code Type(s) that can be detected for the process. Typically each debug engine knows how to debug a specific code type (the two terms tend to be used interchangeably). If you click on a different process in the list with a different code type, the debug engine used will be different. However note that this is the automatic behavior. If you believe you know best, or more typically you want to choose the debug engine for a process using more than one code type, you can do so by clicking the "Select..." button, which should yield a "Select Code Type" dialog like this one: In this dialog you can switch to the debug engine you want to use by checking the box in front of your desired one, then hit "OK", then hit "Attach" to use it. Notice that the dialog suggests that you can select more than one. Not all combinations work (you'll get an error if you select two incompatible debug engines), but some do. Also notice in the list of debug engines one of the new players in Visual Studio 11, the GPU debug engine - I will be covering that on the C++ AMP team blog (and no, it cannot be combined with any others in this release). Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• What&rsquo;s new in VS.10 &amp; TFS.10?

  - by johndoucette

  Getting my geek on… I have decided to call the products VS.10 (Visual Studio 2010), TP.10 (Test Professional 2010),  and TFS.10 (Team Foundation Server 2010) Thanks Neno Loje. What's new in Visual Studio & Team Foundation Server 2010? Focusing on Visual Studio Team System (VSTS) ALM-related parts: Visual Studio Ultimate 2010 NEW: IntelliTrace® (aka the historical debugger) NEW: Architecture Tools New Project Type: Modeling Project UML Diagrams UML Use Case Diagram UML Class Diagram UML Sequence Diagram (supports reverse enginneering) UML Activity Diagram UML Component Diagram Layer Diagram (with Team Build integration for layer validation) Architecuture Explorer Dependency visualization DGML Web & Load Tests Visual Studio Premium 2010 NEW: Architecture Tools Read-only model viewer Development Tools Code Analysis New Rules like SQL Injection detection Rule Sets Code Profiler Multi-Tier Profiling JScript Profiling Profiling applications on virtual machines in sampling mode Code Metrics Test Tools Code Coverage NEW: Test Impact Analysis NEW: Coded UI Test Database Tools (DB schema versioning & deployment) Visual Studio Professional 2010 Debuger Mixed Mode Debugging for 64-bit Applications Export/Import of Breakpoints and data tips Visual Studio Test Professional 2010 Microsoft Test Manager (MTM, formerly known as "Camano")) Fast Forward Testing Visual Studio Team Foundation Server 2010 Work Item Tracking and Project Management New MSF templatesfor Agile and CMMI (V 5.0) Hierarchical Work Items Custom Work Item Link Types Ready to use Excel agile project management workbooks for managing your backlogs (including capacity planing) Convert Work Item query to an Excel report MS Excel integration Support for Work Item hierarchies Formatting is preserved after doing a 'Refresh' MS Project integration Hierarchy and successor/predecessor info is now synchronized NEW: Test Case Management Version Control Public Workspaces Branch & Merge Visualization Tracking of Changesets & Work Items Gated Check-In Team Build Build Controllers and Agents Workflow 4-based build process NEW: Lab Management (only a pre-release is avaiable at the moment!) Project Portal & Reporting Dashboards (on SharePoint Portal) Burndown Chart TFS Web Parts (to show data from TFS) Administration & Operations Topology enhancements Application tier network load balancing (NLB) SQL Server scale out Improved Sharepoint flexibility Report Server flexibility Zone support Kerberos support Separation of TFS and SQL administration Setup Separate install from configure Improved installation wizards Optional components Simplified account requirements Improved Reporting Services configuration Setup consolidation Upgrading from previous TFS versions Improved IIS flexibility Administration Consolidation of command line tools User rename support Project Collections Archive/restore individual project collections Move Team Project Collections Server consolidation Team Project Collection Split Team Project Collection Isolation Server request cancellation Licensing: TFS server license included in MSDN subscriptions Removed features (former features not part of Visual Studio 2010): Debug » Start With Application Verifier Object Test Bench IntelliSense for C++ / CLI Debugging support for SQL 2000

  Read the article

• Liberado Visual Studio 2010 Feature Pack y Power Tools

  - by carlone

    Estimados amig@s, El lunes recien pasado, fue liberado a la web (Release to Web RTW) el primer paquete de Visual Studio Feature Pack, el cual incluye Microsoft Visual Studio 2010 Visualization and Modeling Feature Pack y el Visual Studio 2010 Productivity Powertools. Realmente son dos herramientas muy poderosas de las cuales pueden obtener beneficio sobre todo en términos de eficiencia y productividad a la hora de estar haciendo programación. Visual Studio 2010 Productivity Powertools En palabras simples, esta herramienta es un conjunto de extensiones para visual studio (versión Professional para arriba), para mejorar la productividad de los programadores. Dentro de las muchas características que ofrece, podemos resaltar: Mejoras a la visualización dentro de los tabs en Visual Studio, lo cual incluye Scrollable Tabs Vertical Tabs Pinned Tabs Ventana de dialog para añadir referencias a un proyecto más eficiente y con capacidad de búsqueda Sobresaltar o marcar la línea actual (Muy útil para en monitores de alta resolución) HTML Copy, que permite copiar el código sin perder el formato Ctrl + Click Go to definition, esta es una característica que permite que al presionar la tecla control podamos ubicar hipervínculos para navegar a la definición de un símbolo. Alineación del código cuando hacemos asignación de valores Bien si de dan cuenta, son muchas las características que pueden aprovechar para mejorar su experiencia de programación dentro del entorno de Visual Studio 2010. Para descargar el instalador y obtener más información dirigirse al website: http://visualstudiogallery.msdn.microsoft.com/en-us/d0d33361-18e2-46c0-8ff2-4adea1e34fef   Microsoft Visualization and Modeling Feature Pack A través de esta herramienta podrás sacar mucho provecho para desarrollar modelos basados en UML. Nota: Este paquete esta limitado a suscriptores de MSDN y se puede descargar únicamente desde el sitio de descargas para suscriptores de MSDN. Es pre requisito tener la versión Visual Studio 2010 Ultimate para utilizar esta herramienta. Dentro de las muchas características ofrecidas, podemos resaltar: Generación de código a partir de diagramas UML Crear diagramas UML a partir del código (Ej: generar un diagrama de secuencia en base al código de su aplicación) Generar gráficas de dependencias de proyectos web Importar elementos de modelos de clase, secuencia y casos de uso de archivos XMI 2.1 Aunque esta limitada a la versión Ultimate, con esta herramienta los Arquitectos de Software y los jefes de desarrollo tendrán la posibilidad de poder controlar y diseñar mejor sus aplicaciones. Si desean ver la documentación, videos y descargar el pack pueden dirigirse a:  http://msdn.microsoft.com/en-us/vstudio/ff655021.aspx   Espero que estas herramientas les sean de mucho provecho!   Saludos, Carlos A. Lone Sigueme en Twitter @carloslonegt

  Read the article

• American Modern Insurance Group recognized at 2010 INN VIP Best Practices Awards

  - by [email protected]

  Below: Helen Pitts (right), Oracle Insurance, congratulates Bruce Weisgerber, Munich Re, as he accepts a VIP Best Practices Award on behalf of American Modern Insurance Group.     Oracle Insurance Senior Product Marketing Manager Helen Pitts is attending the 2010 ACORD LOMA Insurance Forum this week at the Mandalay Bay Resort in Las Vegas, Nevada, and will be providing updates from the show floor. This is one of my favorite seasons of the year--insurance trade show season. It is a time to reconnect with peers, visit with partners, make new industry connections, and celebrate our customers' achievements. It's especially meaningful when we can share the experience of having one of our Oracle Insurance customers recognized for being an innovator in its business and in the industry. Congratulations to American Modern Insurance Group, part of the Munich Re Group. American Modern earned an Insurance Networking News (INN) 2010 VIP Best Practice Award yesterday evening during the 2010 ACORD LOMA Insurance Forum. The award recognizes an insurer's best practice for use of a specific technology and the role, if feasible, that ACORD data standards played as a part of their business and technology. American Modern received an Honorable Mention for leveraging the Oracle Documaker enterprise document automation solution to: Improve the quality of communications with customers in high value, high-touch lines of business Convert thousands of page elements or "forms" from their previous system, with near pixel-perfect accuracy Increase efficiency and reusability by storing all document elements (fonts, logos, approved wording, etc.) in one place Issue on-demand documents, such as address changes or policy transactions to multiple recipients at once Consolidate all customer communications onto a single platform Gain the ability to send documents to multiple recipients at once, further improving efficiency Empower agents to produce documents in real time via the Web, such as quotes, applications and policy documents, improving carrier-agent relationships Munich Re's Bruce Weisgerber accepted the award on behalf of American Modern from Lloyd Chumbly, vice president of standards at ACORD. In a press release issued after the ceremony Chumbly noted, "This award embodies a philosophy of efficiency--working smarter with standards, these insurers represent the 'best of the best' as chosen by a body of seasoned insurance industry professionals." We couldn't agree with you more, Lloyd. Congratulations again to American Modern on your continued innovation and success. You're definitely a VIP in our book! To learn more about how American Modern is putting its enterprise document automation strategy into practice, click here to read a case study. Helen Pitts is senior product marketing manager for Oracle Insurance.

  Read the article

• Book review: Microsoft System Center Enterprise Suite Unleashed

  - by BuckWoody

  I know, I know – what’s a database guy doing reading a book on System Center? Well, I need it from time to time. System Center is actually a collection of about 7 different products that you can use to manage and monitor your software and hardware, from drive space through Microsoft Office, UNIX systems, and yes, SQL Server. It’s that last part I care about the most, and so I’ve dealt with Data Protection Manager and System Center Operations Manager (I call it SCOM) in SQL Server. But I wasn’t familiar with the rest of the suite nor was I as familiar as I needed to be with the “Essentials” release – a separate product that groups together the main features of System Center into a single offering for smaller organizations. These companies usually run with a smaller IT shop, so they sometimes opt for this product to help them monitor everything, including SQL Server. So I picked up “Microsoft System Center Enterprise Suite Unleashed” by Chris Amaris and a cast of others. I don’t normally like to get a technical book by multiple authors – I just find that most of the time it’s quite jarring to switch from author to author, but I think this group did pretty well here.  The first chapter on introducing System Center has helped me talk with others about what the product does, and which pieces fit well together with SQL Server. The writing is well done, and I didn’t find a jump from author to author as I went along. The information is sequential, meaning that they lead you from install to configuration and then use. It’s very much a concepts-and-how-to book, and a big one at that – over 950 pages of learning! It was a pretty quick read, though, since I skipped the installation parts and there are lots of screenshots. While I’m not sure you’d be an expert on the product when you finish reading this book, but I would say you’re more than halfway there. I would say it suits someone that learns through examples the best, since they have a lot of step-by-step examples I do recommend that you take a look if you have to interact with this product, or even if you are a smaller shop and you’re the primary IT resource. The last few chapters deal with System Center Essentials, and honestly it was the best part of the book for me. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• SSDT - What's in a name?

  - by jamiet

  SQL Server Data Tools (SSDT) recently got released as part of SQL Server 2012 and depending on who you believe it can be described as either: a suite of tools for building SQL Server database solutions or a suite of tools for building SQL Server database, Integration Services, Analysis Services & Reporting Services solutions Certainly the SQL Server 2012 installer seems to think it is the latter because it describes SQL Server Data Tools as "the SQL server development environment, including the tool formerly named Business Intelligence Development Studio. Also installs the business intelligence tools and references to the web installers for database development tools" as you can see here: Strange then that, seemingly, there is no consensus within Microsoft about what SSDT actually is. On yesterday's blog post First Release of SSDT Power Tools reader Simon Lampen asked the quite legitimate question:I understand (rightly or wrongly) that SSDT is the replacement for BIDS for SQL 2012 and have just installed this. If this is the case can you please point me to how I can edit rdl and rdlc files from within Visual Studio 2010 and import MS Access reports.To which came the following reply:SSDT doesn't include any BIDs (sic) components. Following up with the appropriate team (Analysis Services, Reporting Services, Integration Services) via their forum or msdn page would be the best way to answer you questions about these kinds of services. That's from a Microsoft employee by the way. Simon is even more confused by this and replies with:I have done some more digging and am more confused than ever. This documentation (and many others) : msdn.microsoft.com/.../ms156280.aspx expressly states that SSDT is where report editing tools are to be foundAnd on it goes....You can see where Simon's confusion stems from. He has official documentation stating that SSDT includes all the stuff for building SSIS/SSAS/SSRS solutions (this is confirmed in the installer, remember) yet someone from Microsoft tells him "SSDT doesn't include any BIDs components".I have been close to this for a long time (all the way through the CTPs) so I can kind of understand where the confusion stems from. To my understanding SSDT was originally the name of the database dev stuff but eventually that got expanded to include all of the dev tools - I guess not everyone in Microsoft got the memo.Does this sound familiar? Have we not been down this road before? The database dev tools have had upteen names over the years (do any of datadude, TSData, VSTS for DB Pros, DBPro, VS2010 Database Projects sound familiar) and I was hoping that the SSDT moniker would put all confusion to bed - evidently its as complicated now as it has ever been.Forgive me for whinging but putting meaningful, descriptive, accurate, well-defined and easily-communicated names onto a product doesn't seem like a difficult thing to do. I guess I'm mistaken!Onwards and upwards...@Jamiet

  Read the article

• Build Mobile App for E-Business Suite Using SOA Suite and ADF Mobile

  - by Michelle Kimihira

  With the upcoming release of Oracle ADF Mobile, I caught up with Srikant Subramaniam, Senior Principal Product Manager, Oracle Fusion Middleware post OpenWorld to learn about the cool hands-on lab at OpenWorld.  For those of you who missed it, you will want to keep reading... Author: Srikant Subramaniam, Senior Principal Product Manager,Oracle Fusion Middleware Oracle ADF Mobile enables rapid and declarative development of native on-device mobile applications. These native applications provide a richer experience for smart devices users running Apple iOS or other mobile platforms. Oracle ADF Mobile protects Oracle customers from technology shifts by adopting a metadata-based development framework that enables developer to develop one app (using Oracle JDeveloper), and deploy to multiple device platforms (starting with iOS and Android).  Oracle ADF Mobile also enables IT organizations to leverage existing expertise in web-based and Java development by adopting a hybrid application architecture that brings together HTML5, Java, and device native container: HTML5 allows developer to deliver device-native user experiences while maintaining portability across different platforms Java allows developers to create modules to support business logic and data services Native container provides integration into device services such as camera, contacts, etc All these technologies are packaged into a development framework that supports declarative application development through Oracle JDeveloper. ADF Mobile also provides out of box integratoin with key Fusion Middleware components, such as SOA Suite and Business Process Management (BPM). Oracle Fusion Middleware provides the necessary infrastructure to extend business processes and services to the mobile device -- enabling the mobile user to participate in human tasks – without the additional “mobile middleware” layer. When coupled with Oracle SOA Suite, this combination can execute business transactions on Oracle E-Business Suite (or any Oracle Application). Demo Use Case: Mobile E-Business Suite (iExpense) Approvals Using an employee expense approval scenario, we illustrate how to use Oracle Fusion Middleware and Oracle ADF Mobile to build application extensions that integrate intelligently with Oracle Applications (For example, E-Business Suite). Building these extensions using Oracle Fusion middleware and ADF makes modifications simple, quick to implement, and easy to maintain/upgrade. As described earlier, this approach also extends Fusion Middleware to mobile users without the additional "Mobile Middleware" layer. The approver is presented with a list of expense reports that have been submitted for approval. These expense reports are retrieved from the backend E-Business Suite and displayed on the mobile device. Approval (or rejection) of the expense report kicks off the workflow in E-Business Suite and takes it to completion. The demo also shows how to integrate with native device services such as email, contacts, BI dashboards as well as a prebuilt PDF viewer (this is especially useful in the expense approval scenario, as there is often a need for the approver to access the submitted receipts). Summary Oracle recommends Fusion Middleware as the application integration platform to deliver critical enterprise data and processes to mobile applications.  Pre-built connectors between Fusion Middleware and Applications greatly accelerates the integration process.  Instead of building individual integration points between mobile applications and individual enterprise applications, Oracle Fusion Middleware enables IT organizations to leverage a common platform to support both desktop and mobile application.  Additional Information Product Information on Oracle.com: Oracle Fusion Middleware Follow us on Twitter and Facebook Subscribe to our regular Fusion Middleware Newsletter

  Read the article

• SQLAuthority News – SQL Server 2012 Upgrade Technical Guide – A Comprehensive Whitepaper – (454 pages – 9 MB)

  - by pinaldave

  Microsoft has just released SQL Server 2012 Upgrade Technical Guide. This guide is very comprehensive and covers the subject of upgrade in-depth. This is indeed a helpful detailed white paper. Even writing a summary of this white paper would take over 100 pages. This further proves that SQL Server 2012 is quite an important release from Microsoft. This white paper discusses how to upgrade from SQL Server 2008/R2 to SQL Server 2012. I love how it starts with the most interesting and basic discussion of upgrade strategies: 1) In-place upgrades, 2) Side by side upgrade, 3) One-server, and 4) Two-server. This whitepaper is not just pure theory but is also an excellent source for some tips and tricks. Here is an example of a good tip from the paper: “If you want to upgrade just one database from a legacy instance of SQL Server and not upgrade the other databases on the server, use the side-by-side upgrade method instead of the in-place method.” There are so many trivia, tips and tricks that make creating the list seems humanly impossible given a short period of time. My friend Vinod Kumar, an SQL Server expert, wrote a very interesting article on SQL Server 2012 Upgrade before. In that article, Vinod addressed the most interesting and practical questions related to upgrades. He started with the fundamentals of how to start backup before upgrade and ended with fail-safe strategies after the upgrade is over. He covered end-to-end concepts in his blog posts in simple words in extremely precise statements. A successful upgrade uses a cycle of: planning, document process, testing, refine process, testing, planning upgrade window, execution, verifying of upgrade and opening for business. If you are at Vinod’s blog post, I suggest you go all the way down and collect the gold mine of most important links. I have bookmarked the blog by blogging about it and I suggest that you bookmark it as well with the way you prefer. Vinod Kumar’s blog post on SQL Server 2012 Upgrade Technical Guide SQL Server 2012 Upgrade Technical Guide is a detailed resource that’s also available online for free. Each chapter was carefully crafted and explained in detail. Here is a quick list of the chapters included in the whitepaper. Before downloading the guide, beware of its size of 9 MB and 454 pages. Here’s the list of chapters: Chapter 1: Upgrade Planning and Deployment Chapter 2: Management Tools Chapter 3: Relational Databases Chapter 4: High Availability Chapter 5: Database Security Chapter 6: Full-Text Search Chapter 7: Service Broker Chapter 8: SQL Server Express Chapter 9: SQL Server Data Tools Chapter 10: Transact-SQL Queries Chapter 11: Spatial Data Chapter 12: XML and XQuery Chapter 13: CLR Chapter 14: SQL Server Management Objects Chapter 15: Business Intelligence Tools Chapter 16: Analysis Services Chapter 17: Integration Services Chapter 18: Reporting Services Chapter 19: Data Mining Chapter 20: Other Microsoft Applications and Platforms Appendix 1: Version and Edition Upgrade Paths Appendix 2: SQL Server 2012: Upgrade Planning Checklist Download SQL Server 2012 Upgrade Technical Guide [454 pages and 9 MB] Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, DBA, PostADay, SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, SQL White Papers, SQLAuthority News, SQLServer, T SQL, Technology

  Read the article

• BI&EPM in Focus June 2013

  - by Mike.Hallett(at)Oracle-BI&EPM

  Analyst Report from Ovum: BI bites into a bigger slice of Oracle’s Red Stack Customers INC Research Ensures 24/7 Enterprise Application Availability and Supports Rapid Expansion in Asia with Managed Cloud Services – Hyperion Planning, PeopleSoft, E-Business Suite, SOA Suite PL Developments Improves Quality and Demand Planning Accuracy, Streamlines Compliance as It Moves into Manufacturing – Hyperion Planning, OBIEE, E-Business Suite Release 12.1, Agile, Demantra Kiabi Provides Store Managers with Monthly Earnings Statements in Four Business Days to Support Continued Retail Growth – Hyperion Planning, Hyperion Financial Reporting, Hyperion Smart View for Office Speedy Cash Improves Global Financial Budgeting and Forecasting to Support Continued Company Growth - Hyperion Planning, Essbase, Hyperion Smart View for Office, Hyperion Financial Management Grupo Sports World Automates and Reduces Budget Consolidation Time by 33% for 30 Fitness Centers – Hyperion Planning Jupiter Shop Channel Automates Budgeting Processes, Enhances Visibility of Project Investments to Support Strategic Decision-Making – Hyperion Planning GENBAND Saves US$1.25 Million Annually with Automated Global Trade Management, Gains Compliance Assurance – Hyperion Financial Management, E-Business Suite Aldar Properties Consolidates and Simplifies Group Planning and Reporting for Business and Finance Structures with Integrated ERP and Business Intelligence – Hyperion Planning, Essbase, Data Integrator, OBIEE, E-Business Suite, SUN Link to Complete Archive Enterprise Performance Management Hyperion EPM 11.1.2.3 Webcast Tutorials EPM Blog: Three Technologies CFOs Need to Know About The CFO as Catalyst for Change - Part 1 The CFO as Catalyst for Change - Part 2 Actions Speak Louder in Scorecards Unlocking Business Potential with Enterprise Performance Management Business Intelligence Oracle Database 12c is launched Analysis: How to Take Big Data Advantage of Oracle Database 12c by Data-informed.com Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

  Read the article

• Silverlight Cream for April 05, 2010 -- #831

  - by Dave Campbell

  In this Issue: Rénald Nollet, Davide Zordan(-2-, -3-), Scott Barnes, Kirupa, Christian Schormann, Tim Heuer, Yavor Georgiev, and Bea Stollnitz. Shoutouts: Yavor Georgiev posted the material for his MIX 2010 talk: what’s new in WCF in Silverlight 4 Erik Mork and crew posted their This Week in Silverlight 4.1.2010 Tim Huckaby and MSDN Bytes interviewed Erik Mork: Silverlight Consulting Life – MSDN Bytes Interview From SilverlightCream.com: Home Loan Application for Windows Phone Rénald Nollet has a WP7 app up, with source, for calculating Home Loan application information. He also discusses some control issues he had with the emulator. Experiments with Multi-touch: A Windows Phone Manipulation sample Davide Zordan has updated the multi-touch project on CodePlex, and added a WP7 sample using multi-touch. Silverlight 4, MEF and MVVM: EventAggregator, ImportingConstructor and Unit Tests Davide Zordan has a second post up on MEF, MVVM, and Prism, oh yeah, and also Unit Testing... the code is available, so take a look at what he's all done with this. Silverlight 4, MEF and MVVM: MEFModules, Dynamic XAP Loading and Navigation Applications Davide Zordan then builds on the previous post and partitions the app into several XAPs put together at runtime with MEF. Silverlight Installation/Preloader Experience - BarnesStyle Scott Barnes talks about the install experience he wanted to get put into place... definitely a good read and lots of information. Changing States using GoToStateAction Kirupa has a quick run-through of Visual States, and then demonstrates using GoToStateAction and a note for a Blend 4 addition. Blend 4: About Path Layout, Part IV Christian Schormann has the next tutorial up in his series on Path Layout, and he's explaining Motion Path and Text on a Path. Managing service references and endpoint configurations for Silverlight applications Helping solve a common and much reported problem of managing service references, Tim Heuer details his method of resolving it and additional tips and tricks to boot. Some known WCF issues in Silverlight 4 Yavor Georgiev, a Program Manager for WCF blogged about the issues that they were not able to fix due to scheduling of the release How can I update LabeledPieChart to use the latest toolkit? Bea Stollnitz revisits some of her charting posts to take advantage of the unsealing of toolkit classes in labeling the Chart and PieSeries Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Launch Invitation: Introducing Oracle WebLogic Server 12c

  - by JuergenKress

  Introducing Oracle WebLogic Server 12c, the #1 Application Server Across Conventional and Cloud Environments Please join Hasan Rizvi on December 1, as he unveils the next generation of the industry’s #1 application server and cornerstone of Oracle’s cloud application foundation—Oracle WebLogic Server 12c. Hear, with your fellow IT managers, architects, and developers, how the new release of Oracle WebLogic Server is: Designed to help you seamlessly move into the public or private cloud with an open, standards-based platform Built to drive higher value for your current infrastructure and significantly reduce development time and cost Optimized to run your solutions for Java Platform, Enterprise Edition (Java EE); Oracle Fusion Middleware; and Oracle Fusion Applications Enhanced with transformational platforms and technologies such as Java EE 6, Oracle’s Active GridLink for RAC, Oracle Traffic Director, and Oracle Virtual Assembly Builder Don’t miss this online launch event. Register now. Executive Overview Thurs., December 1, 2011 10 a.m. PT / 1 p.m. ET Presented by: Hasan Rizvi Senior Vice President, Product Development, Oracle Today most businesses have the ambition to move to a cloud infrastructure. However, IT needs to maintain and invest in their current infrastructure for supporting today’s business. With Oracle WebLogic, the #1 app server in the marketplace, we provide you with the best of both worlds. The enhancements contained in WebLogic 12c provide you with significant benefits that drive higher value for your current infrastructure, while significantly reducing development time and cost. In addition, with WebLogic you are cloud-ready. You can move your existing applications as-is to a high performance engineered system, Exalogic, and instantly experience performance and scalability improvements that are orders of magnitude higher. A WebLogic-Exalogic combination may provide your private cloud infrastructure. Moreover, you can develop and test your applications on the recently announced Oracle’s Public Cloud offering: the Java Cloud Service and seamlessly move these to your on-premise infrastructure for production deployments. Developer Deep-Dive Thurs., December 1, 2011 11 a.m. PT / 2 p.m. ET See demos and interact with experts via live chat. Presented by: Will Lyons Director, Oracle WebLogic Server Product Management, Oracle Modern Java development looks very different from even a few years ago. Technology innovation, the ecosystem of tools and their integration with Java standards are changing how development is done. Cloud Computing is causing developers to re-evaluate their development platforms and deployment options. Business users are demanding faster time to market, but without sacrificing application performance and reliability. Find out in this session how Oracle WebLogic Server 12c enables rapid development of modern, lightweight Java EE 6 applications. Learn how you can leverage the latest development technologies, tools and standards when deploying to Oracle WebLogic Server across both conventional and Cloud environments. Don’t miss this online launch event. Register now. For regular information become a member of the WebLogic Partner Community please register at http://www.oracle.com/partners/goto/wls-emea Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Hasan Rizvi,Oracle,WebLogic 12c,OPN,WebLogic Community,Jürgen Kress

  Read the article

• Move Window Buttons Back to the Right in Ubuntu 10.04

  - by Trevor Bekolay

  One of the more controversial changes in the Ubuntu 10.04 beta is the Mac OS-inspired change to have window buttons on the left side. We’ll show you how to move the buttons back to the right. Before While the change may or may not persist through to the April 29 release of Ubuntu 10.04, in the beta version the maximize, minimize, and close buttons appear in the top left of a window. How to move the window buttons The window button locations are dictated by a configuration file. We’ll use the graphical program gconf-editor to change this configuration file. Press Alt+F2 to bring up the Run Application dialog box, enter “gconf-editor” in the text field, and click on Run. The Configuration Editor should pop up. The key that we want to edit is in apps/metacity/general. Click on the + button next to the “apps” folder, then beside “metacity” in the list of folders expanded for apps, and then click on the “general” folder. The button layout can be changed by changing the “button_layout” key. Double-click button_layout to edit it. Change the text in the Value text field to: menu:maximize,minimize,close Click OK and the change will occur immediately, changing the location of the window buttons in the Configuration Editor. Note that this ordering of the window buttons is slightly different than the typical order; in previous versions of Ubuntu and in Windows, the minimize button is to the left of the maximize button. You can change the button_layout string to reflect that ordering, but using the default Ubuntu 10.04 theme, it looks a bit strange. If you plan to change the theme, or even just the graphics used for the window buttons, then this ordering may be more natural to you. After After this change, all of your windows will have the maximize, minimize, and close buttons on the right. What do you think of Ubuntu 10.04’s visual change? Let us know in the comments! Similar Articles Productive Geek Tips Move a Window Without Clicking the Titlebar in UbuntuBring Misplaced Off-Screen Windows Back to Your Desktop (Keyboard Trick)Keep the Display From Turning Off on UbuntuPut Close/Maximize/Minimize Buttons on the Left in UbuntuAllow Remote Control To Your Desktop On Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional SpeedyFox Claims to Speed up your Firefox Beware Hover Kitties Test Drive Mobile Phones Online With TryPhone Ben & Jerry’s Free Cone Day, 3/23/10 New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users

  Read the article

• How do I Integrate Production Database Hot Fixes into Shared Database Development model?

  - by TetonSig

  We are using SQL Source Control 3, SQL Compare, SQL Data Compare from RedGate, Mercurial repositories, TeamCity and a set of 4 environments including production. I am working on getting us to a dedicated environment per developer, but for at least the next 6 months we are stuck with a shared model. To summarize our current system, we have a DEV SQL server where developers first make changes/additions. They commit their changes through SQL Source Control to a local hgdev repository. When they execute an hg push to the main repository, TeamCity listens for that and then (among other things) pushes hgdev repository to hgrc. Another TeamCity process listens for that and does a pull from hgrc and deploys the latest to a QA SQL Server where regression and integration tests are run. When those are passed a push from hgrc to hgprod occurs. We do a compare of hgprod to our PREPROD SQL Server and generate deployment/rollback scripts for our production release. Separate from the above we have database Hot Fixes that will need to be applied in between releases. The process there is for our Operations team make changes on the PreProd database, and then after testing, to use SQL Source Control to commit their hot fix changes to hgprod from the PREPROD database, and then do a compare from hgprod to PRODUCTION, create deployment scripts and run them on PRODUCTION. If we were in a dedicated database per developer model, we could simply automatically push hgprod back to hgdev and merge in the hot fix change (through TeamCity monitoring for hgprod checkins) and then developers would pick it up and merge it to their local repository and database periodically. However, given that with a shared model the DEV database itself is the source of all changes, this won't work. Pushing hotfixes back to hgdev will show up in SQL Source Control as being different than DEV SQL Server and therefore we need to overwrite the reposistory with the "change" from the DEV SQL Server. My only workaround so far is to just have OPS assign a developer the hotfix ticket with a script attached and then we run their hotfixes against DEV ourselves to merge them back in. I'm not happy with that solution. Other than working faster to get to dedicated environment, are they other ways to keep this loop going automatically?

  Read the article

< Previous Page | 337 338 339 340 341 342 343 344 345 346 347 348  | Next Page >