Search Results

Search found 19966 results on 799 pages for 'wild thing'.

Page 341/799 | < Previous Page | 337 338 339 340 341 342 343 344 345 346 347 348  | Next Page >

• Why has ESXi 5.0 not used the software RAID configuration on my test server?

  - by kafka

  I've got a test server which was running WS 2008 Enterprise on the bare metal. It was correctly using the software RAID 1 configuration (2x250 GB disks which appeared as one disk), setup on the Dell Poweredge T110 (which meets compatibility requirements) without requiring any extra setup from me. (As an aside I'm fairly sure it's software RAID, as we didn't spec a hardware RAID controller, if that's of any importance in this situation). I am now testing installing ESXi 5.0 on this server to run some VMs. I've successfully installed ESXi, and imported a VM fine, but it's showing 2 x 250 GB disks available as datastores. However they should be appearing as one volume. When I boot the server, there is a RAID configuration screen you can enter, and I'm guessing this is what I'll have to do at some stage, but now need to be very careful because there is one disk which contains data that I want to be mirrored on the other disk. What is the best thing to do in this situation?

  Read the article

• ubuntu Grub boot hangs on external usb drive

  - by schoetbi

  Hi, i just gave xubuntu another try and installed it ordinarily on a external usb harddisk. I have another harddisk installed inside the laptop that has Windows Xp on it. Now the problem: When I boot from the external drive the boot menu of Grub 2 shows up and i see all installed bootable partitions including windows. Now I select Xubuntu and wait. When the Xubuntu Logo shows up the boot process hangs. Now the funny thing. When the logo shows up I can unplug the usb drive and reconnect it real fast. Then the boot process will continue!!! Since I am a Linux newbie I would appreciate every hint that can solve this so that I can enjoy a smooth Linux boot:-) EDIT Grub version is: tobias@ubuntu:~$ grub-install -v grub-install (GRUB) 1.98+20100804-5ubuntu3 Kernel is: tobias@ubuntu:~$ uname -r 2.6.35-23-generic Xubuntu is 9.10 Thanks

  Read the article

• How to decide if I should take a profit sharing offer or insist on hard cash

  - by Icode4food

  I am currently the sole developer at the very beginning stages of what I think could be a successful startup. My question is simply how to go about determining if I am interested in accepting a permanent stock in the enterprise or if I should insist on hard cash. This startup is seeking venture capital and it is looking likely that they will get something, I don't know how much. I know very little about the business plan or financial operations at all. The founders have experience with other startup type devours that have been successful. From a business perspective I have a reasonable amount of confidence in them. However, I have never met them face to face. They have offered me a partnership in the project but I'm fairly confident that I don't want to do that. I have done some work for them and they really like me so I'm not to afraid of loosing the position all together. I am a young developer with no experience with this sort of thing and need some experience to point me in the right direction. How to I begin to evaluate how much stock or what percentage of the profit should I ask for? Any suggestions at all would be appreciated! P.S. Any suggestions for better tags?

  Read the article

• Visual Studio 2012 first impressions...no Macros!

  - by bconlon

  Yesterday I installed Microsoft Visual Studio 2012 for the first time (all 8.5GB) and after 20 years of (mostly) happy times using VS they have removed Macros, one of the most handy features.The first thing I wanted to do when I upgraded my VS2010 project was to add a #elseif block to each file. This would usually be simple case of find in files of the previous #elseif and then Ctrl+Shift+R to record a macro which would be: F8 (to select the next file from find list), F3 (to find the correct position in file), Ctrl+V to paste the new code. Then all I would need to do is keep Ctrl+Shift+P (Play Macro) pressed until all the files were processed.But alas Ctrl+Shift+R does nothing! I won’t say that I use Macros every day but it was a very useful feature.To continue my moaning a little more, I also don't like the bland interface. This has been well documented by others, but now I have used it myself, I find it difficult to tell one grey area of screen from another and the lack of colour makes the icons unclear.I also don't see why the menus now need to SHOUT in capital letters?On the plus side, they have now added the ability to see WPF properties in the debugger...a bit of an oversight in Visual Studio 2010. Oh, but you still can't edit and continue on files that contain templated code.Whilst Visual Studio 2012 is not a complete disaster like Windows 8 (why develop a desk top OS to be the same as a Smart device OS), it does not float my boat.Rant over.#

  Read the article

• IRQ Conflicts Causing Video Card and Boot Problems?

  - by sanpatricio

  tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

  Read the article

• Changing the Default Windows Phone 7 Deployment Target In Visual Studio 2010

  - by mbcrump

  After you download and install the January 2011 Windows Phone update, you will notice one annoying thing. The default deployment target for Windows Phone Projects in Visual Studio changes to Windows Phone 7 Device. Before the update, it defaulted to the Emulator. I found this extremely annoying as I’m more than likely going to test with the emulator before putting it on my actual device. Now to make things fair, Microsoft told you they were going to switch the default and even provided a solution, but you will have to check a tiny paragraph in the release notes. The good news is that its very easy to do: Simply navigate out to : %LocalAppData%\Microsoft\Phone Tools\CoreCon See the folder named, “10.0”? Go ahead and delete it. Now, the folder will be completely empty and if you fire up Visual Studio 2010 you will see we are now defaulting to the Emulator again. In my opinion, this should have been left at Emulator. Now, new WP7 developers will get a build error when they first start a WP7 project and will not know why until they read the error list.  Subscribe to my feed CodeProject

  Read the article

• Wireless dropouts that only affect subset of devices

  - by jwaddell

  When watching videos streamed over WiFi from a NAS box (D-Link DNS-323) I am getting wireless dropouts. However they only appear to occur when I have left my laptop (Dell Inspiron 9300 running Windows XP SP3) running; the laptop is usually suspended if I'm not using it. The dropouts have occurred when streaming to a Netgear EVA8000 streaming device, and also to a PS3. I'm using a Netgear DG834G as the wireless modem/router. When a dropout occurs I go to the laptop and see that its wireless connection has also dropped out. The odd thing is that my wife's MacBook and my iPhone still maintain their connections. What could be causing this behaviour, and how do I go about fixing it?

  Read the article

• Handling Types for Real and Complex Matrices in a BLAS Wrapper

  - by mga

  I come from a C background and I'm now learning OOP with C++. As an exercise (so please don't just say "this already exists"), I want to implement a wrapper for BLAS that will let the user write matrix algebra in an intuitive way (e.g. similar to MATLAB) e.g.: A = B*C*D.Inverse() + E.Transpose(); My problem is how to go about dealing with real (R) and complex (C) matrices, because of C++'s "curse" of letting you do the same thing in N different ways. I do have a clear idea of what it should look like to the user: s/he should be able to define the two separately, but operations would return a type depending on the types of the operands (R*R = R, C*C = C, R*C = C*R = C). Additionally R can be cast into C and vice versa (just by setting the imaginary parts to 0). I have considered the following options: As a real number is a special case of a complex number, inherit CMatrix from RMatrix. I quickly dismissed this as the two would have to return different types for the same getter function. Inherit RMatrix and CMatrix from Matrix. However, I can't really think of any common code that would go into Matrix (because of the different return types). Templates. Declare Matrix<T> and declare the getter function as T Get(int i, int j), and operator functions as Matrix *(Matrix RHS). Then specialize Matrix<double> and Matrix<complex>, and overload the functions. Then I couldn't really see what I would gain with templates, so why not just define RMatrix and CMatrix separately from each other, and then overload functions as necessary? Although this last option makes sense to me, there's an annoying voice inside my head saying this is not elegant, because the two are clearly related. Perhaps I'm missing an appropriate design pattern? So I guess what I'm looking for is either absolution for doing this, or advice on how to do better.

  Read the article

• Windows 7 automatically rearranges the start menu

  - by Brice

  I've seen so many messages on how to rearrange the Windows Start Menu and none mentioning the real problem in doing so which has been around since XP at least. I go to ProgramData/Microsoft/Windows/Start Menu and have a day making everything the way I want. For one thing, their Maintenance menu, the Accessories menu and the Administrative Tools menu, I like to put under a Tools folder that I've created. And they seem to move OK. However, within a few hours, I see some of the shortcuts have been moved back or copied back and a new copy of these folders suddenly appears again on my Start Menu at the root. This is maddening and no one seems to even notice in all the tutorials I've read. Anyone know how to change this behavior?

  Read the article

• Configuration Tips for better Performance with ADF Mobile Apps

  - by SRINI INDLA

  Some tips to keep in mind to make sure ADF Mobile application's performance is optimal: 1. Select release mode in deployment profile. This is perhaps the most important thing to remember to ensure best performance for ADF Mobile Apps. Selecting this option causes the deployer to package optimized JVM and minified JS libs with the mobile app there by significantly improving the over all performance of the application. 2. For iOS you do not need to do anything else other than selecting  release mode in deploy profile. However, on Android you have to create a keystore and configure it in JDev --> Tools --> Preferences --> ADF Mobile --> Platforms : Android as shown in the snapshot below 3. Steps for generating the Keystore for Android using keytool :  4. Logging level setting in logging.properties: Make sure the log level is set to SEVERE for both framework logger as well as the application logger as follows oracle.adfmf.framework.level=SEVERE oracle.adfmf.application.level=SEVERE 5. When using SOAP WebServices with WebService Data Control make sure you select the option to copy the WSDL. This will cause the JDev to download the WSDL and all the XSDs referenced by the WSDL from the server at design time and package them with the application during deployment. This way the application does not incur the cost of downloading these resources at run time from the device.

  Read the article

• How do you maintain focus when a particular aspect of programming takes 10+ seconds to complete?

  - by Jer

  I have a very difficult time focusing on what I'm doing (programming-wise) when something (compilation, startup time, etc.) takes more than just a few seconds. Anecdotally it seems that threshold is about 10 seconds (and I recall reading about study that said the same thing, though I can't find it now). So what typically happens is I make a change and then run the program to test it. That takes about 30 seconds, so I start reading something else, and before I know it 20 minutes have passed, and then it takes (if I'm lucky!) another 10+ minutes to deal with the context switch to getting back into programming. It's not an exaggeration to say that some things that should take me minutes literally take hours to complete. I'm very curious about what other programmers do to combat this tendency (or if I'm unique and they don't have this tendency?). Suggestions of any type at all are welcome - anything from "sit on your hands after hitting the compile button", to mental tricks, to "if it takes 30 seconds to start up something to test a change, then something's wrong with your development process!"

  Read the article

• Low-res emacs24 icon in application switcher 12.10

  - by MTS

  I recently upgraded to Quantal, and also switched up to emacs24 from 23. Everything is great, except for one thing: the icon in the Application Switcher for emacs24 is a horrible, low-resolution eyesore. Compare the two side-by-side: I've seen a couple of questions addressing issues like this, but they're not quite the same. This one says that it is happening with all icons, but that's clearly not the case here. And this one seems more relevant, but it is talking about Gnome, not Unity. In the comments to the one answer for the second question, it says to look at the icons in /usr/share/icons to see if they are low-resolution, and if so to replace them with better ones. There's a ton of emacs icons, in fact. They are in various subfolders of /usr/share/icons/hicolor and they are in sizes ranging from 16x16 to 128x128, and also there are scaleable .svg versions of the icons too. I noticed that there are no 192x192 or 256x256 versions. But it seems like that shouldn't matter, since emacs23 also didn't have icons in those sizes. Any help would be much appreciated!

  Read the article

• "Missing Operating System" after installing Ubuntu 12.04 from a CD on a Macbook Pro

  - by Pierre

  I followed this guide to install Ubuntu 12.04 on my Macbook Pro 8,2 (late 2011): https://help.ubuntu.com/community/MactelSupportTeam/AppleIntelInstallation I used a CD. I synced the partition table on rEFIt, and it went fine. I do have an icon to boot on Linux, but when I launch it, after a few seconds I have "Missing Operating System" displayed, and that's all... How can I fix that? The only thing I see is, in the guide, it is mentioned this: On the last dialog of the installer, be sure to click the “Advanced” button and choose to install the boot loader (grub) to your root Ubuntu partition, for example /dev/sda3. This will be the only partition with the EXT4 file system. In Ubuntu 12.04 installation process, there is not such an option, but there is a dropdown menu to select where the grub bootloader should be installed. It was /dev/sda by default, but I selected my root Ubuntu partition (in my case, /dev/sda5). I got a warning message (but actually, it was the same warning message even when I selected /dev/sda), and I continued the installation... Thanks in advance for your help!

  Read the article

• GLES2.0 3D Android game performance and multi threading the update?

  - by Ofer

  I have profiled my mixed Java\C++ Android game and I got the following result: https://dl.dropbox.com/u/8025882/PompiDev/AndroidProfile.png As you can see, the pink think is a C++ functions that updates the game. It does things like updating the logic but it mostly it generates a "request list" for rendering. The thing is, I generate DrawLists on C++ and then send them to Java to process and draw using GLES2.0. Since then I was able to improve update from 9ms down to about 7ms, but I would like to ask if I would benefit from multi threading the update? As I understand from that diagram is that the function that takes the most time is the one you see it's color on the timeline. So the pink area is taken mostly by update. The other area has MainOpenGL.Handle as it's main contributor(whch is my java function), but since it's not drawn to the top of the diagram I can conclude other things are happening at the same time that use the CPU? Or even GPU stuff that isn't shown in this diagram. I am not sure how the GPU works on this. Does it calculate stuff in parallel to the CPU? Or is it part of the CPU usage as in SoC? I am not sure. Anyway, in case GPU things DO happen in parallel to CPU, then I would guess that if I do this C++ Update in parallel to the thread that makes the OpenGL calls, I might make use of "dead CPU time" due to GPU stalling or maybe have the GPU calls getting processed earlier because it won't have to wait for Update to finish? How do you suggest to improve performance based on that? Thanks.

  Read the article

• any security tips for my first server? (complete beginner)

  - by Haroldo

  I'm paying for a VPS and hoping to launch my first website on it in the next few days. I'm worried there might be some glaringly obvious security holes in the standard setup, so I'm keen to get some tips About the only thing i know is turn off error reporting in PHP and create users/privilages for MySQL... any more stuff along those lines? I'm using: cpanel and WHM centos 5 php mysql google apps as mail server (so maybe i should disable built in mailer server somehow?!!) This is my first post of Server Fault (i use stack overflow alot), I hope i'm posting this in the right place, with the right tags - please feel free to edit if i'm wrong. Thanks guys!

  Read the article

• Parameterized Django models

  - by mgibsonbr

  In principle, a single Django application can be reused in two or more projects, providing functionality relevent to both. That implies that the same database structure (tables and relations) will be re-created identically in different databases, and most times this is not a problem (assuming the projects/databases are unrelated - for instance when someone downloads a complete app to use in their own projects). Sometimes, however, the models must be "tweaked" a little to better fit the problem needs. This can be accomplished by forking the app, but I wondered if there wouldn't be a better option in cases where the app designer can anticipate the most common customizations. For instance, if I have a model that could relate to another as one-to-one or one-to-many, I could specify the unique property as a parameter, that can be specified in the project's settings: class This(models.Model): other = models.ForeignKey(Other, unique=settings.OTHER_TO_THIS) Or if a model can relate to many others, I could create an intermediate table for each of them (thus enforcing referential integrity) instead of using generic fks: for related in settings.MODELS_RELATED_TO_OTHER: model_name = '%s_Other' % related globals()[model_name] = type(model_name, (models.Model,) { me:models.ForeignKey(find_model_class(related)), other:models.ForeignKey(Other), # Some other properties all intersection tables must have }) Etc. Let me stress out that I'm not proposing to change the models at runtime nor anything like that; once the parameters were defined and syncdb called for the first time, those parameters are not to be changed again (unless you're doing a schema migration). Is this a good design? Are there better ways to accomplish the same thing, or maybe drawbacks I coulnd't anticipate? This technique is meant to be used sparingly (only on apps meant to be reused in wildly different contexts, and only when a specific need of customization can be detected while the app model is being designed).

  Read the article

• SoX on Windows 7 64-Bit Outfile Missing

  - by Christian

  I have come across the strangest problem when trying to run sox.exe on my Windows 7 installation. Whenever I try and record audio it works without any issues but it will not output an audio file. The crazy thing is that when I use the play command it successfully plays what I just recorded. Has anyone ever heard of this happening? Here are the commands (and output) that I'm using: C:\Program Files (x86)\Vox\sox-14-4-0>sox -d test.wav trim 0 00:05 Input File : 'default' (waveaudio) Channels : 2 Sample Rate : 48000 Precision : 16-bit Sample Encoding: 16-bit Signed Integer PCM In:0.00% 00:00:05.03 [00:00:00.00] Out:240k [ | ] Clip:0 Done. C:\Program Files (x86)\Vox\sox-14-4-0>play test.wav test.wav: File Size: 960k Bit Rate: 1.54M Encoding: Signed PCM Channels: 2 @ 16-bit Samplerate: 48000Hz Replaygain: off Duration: 00:00:05.00 In:100% 00:00:05.00 [00:00:00.00] Out:240k [ | ] Clip:0 Done. Am I losing my mind or is something up here?

  Read the article

• How system services are started in 12.10?

  - by Salem

  One thing that always confused me in Ubuntu was how system services are started. I know that Ubuntu uses Upstart and supports SysV, but which one is used to start the services? This matters when you want a "manual" start for a service. For example, on my system i have files for the following services either in /etc/init.d/<service> (Upstart) and /etc/init/<service>.conf (SysV): acpid, mysql, networking, qemu-kvm, ufw, libvirt-bin So if i want to disable MySQL execution at startup, i must use the Upstart way or the SysV way to disable it? Also, how can i tell which of those is really used to start a generic service? Edit The really doubt here is not how disable/enable services using SysV/Upstart. What really confuses me is that some services seem to be defined (and enabled) in SysV and Upstart at the same time. Is there any precedence between them (like if mysql is enabled in both launch it using SysV)? Or can it be the case that one tool uses the other in background?

  Read the article

• Virtual system drive is split between separate LUNs

  - by Tigran

  My hardware VMWare guy told me that a Win2008R2 server I have has a D drive that is split between two separate LUNs. He could not tell me if that's a good thing or bad just that it's not standard practice for him. Would you please explain the benefits or drawbacks of this setup? Thanks EDIT Some additional info. What happened was I had D drive already allocated. Then I asked for more. They said there's no more space on whatever LUN my D drive is on so the option they gave me was that part of the D drive will be on one LUN and other part will be on another LUN. Hope that helps

  Read the article

• Linux: disbale USB without disabling power

  - by Ergot

  TLDR I want toggle between the following usages of a usb-port via the terminal: use like a normal usb-port only supply energy to charge Story I recently got me something like a magna doodle that can save your drawings to pdf, which can be moved to your computer via usb afterwards. Now the thing is that you can't save anything while it's plugged in. Because it's the only way to charge it, it bugs me that I can't find a software solution and laziness I want to keep it plugged in and toggle the connection to the computer only when needed. I noticed that it's charging and usable when it is plugged in and the computer is shut down or suspened. So I guess that there's a way to do it. Tech info computer: ThinkPad X201 Linux Kernel: 3.14.5-1-ARCH "Magna doodle": Boogie Board Sync

  Read the article

• In Outlook 2013, the reading pane does not display images correctly for most emails (but does for some)

  - by smoldyr

  I am running Microsoft Office Outlook 2013 on Windows 7 Enterprise. When I click on an email in the list of messages, the preview of the message in the reading pane usually will not show the images contained in the email, but instead will show a red 'X'. Sometimes this red 'X' is followed by the text "The linked image cannot be displayed. The file may have been moved, renmaed, or deleted. Verify that the link points to the correct file and location." I am using an IMAP email account. The really strange thing is that for some emails, the images will display, although they take a long time to load. How can I make the images show up in the reading pane?

  Read the article

• Commit charge peak higher than system limit

  - by Grubsnik

  We are seeing some very strange behaviour on our servers and google didn't turn up anything usefull, so I'm tossing it out here. A standard server is configured with 4GB Ram, 2 4GB pagefiles and running windows server 2003. The servers are running 50-120 vb6/.net applications which normally consume no more than 100mb of memory, but will occasionally run up to 300 mb. The issue with a single process spending way too much memory is being traced down somewhere else, but the thing that is baffling us is that the reported peak charge is vastly higher than what we have available. As the image above shows, we are getting reported peaks that are way higher than what the system is actually capable of delivering. This number has been seen as high as 29GB, which makes no sense at all for a system with a limit of 12GB. Does anyone have an idea what is going on?

  Read the article

• How can I replicate the look and limitations of the Super NES?

  - by Mikalichov

  I am looking to produce graphics with the same limitations / look that in the Super Nes era. I am specifically looking for graphics similar to Chrono Trigger / FF6. It would be a lot easier to do if I had an idea of the resolution / dpi I am supposed to use. I found that the technical specs for the SNES are: Progressive: 256 × 224, 512 × 224, 256 × 239, 512 × 239 Interlaced: 512 × 448, 512 × 478 But even by using these resolutions, it is pointless if I set it at 72dpi, as I will still have possibly very detailed graphics (that is the main thing, I don't want detailed graphics, I want to go pixelated). I figured it might be related to the sprite size limit, i.e.: Sprites can be 8 × 8, 16 × 16, 32 × 32, or 64 × 64 pixels, each using one of eight 16-color palettes and tiles from one of two blocks of 256 in VRAM. Up to 32 sprites and 34 8 × 8 sprite tiles may appear on any one line. This would work for sprites (characters, objects), but what about maps? Are they built entirely from 8x8 tiles? And then, at what resolution is the end result displayed? It might seem like I am giving the question and answers at the same time, but all of these are suppositions I am making, so could someone confirm or correct them?

  Read the article

• Windows Server 2003: Remapping external domain

  - by Chuck Harmston

  We're playing a going-away prank on a coworker, and would like to use a rule in our internal DNS server to redirect techcrunch.com to point at one of our internal development servers. Basically, I'd like to accomplish the same thing as adding a line to a Linux /etc/hosts file, only for the entire network. I have access to our DNS server. How would you go about doing this? I created an entry in the reverse lookup subnet with the 'Host Name' of techcrunch.com and the 'Host IP' of our development server, a Linux box running Debian on which I've created a virtualhost to handle requests to techcrunch.com. It doesn't appear to be working, however, and my expertise has reached its limit. Thanks!

  Read the article

• Ubuntu 10.04 hung on unattended apt-get upgrade?

  - by hafichuk

  I'm looking into why our ubuntu web server hung this morning and see that there was some package upgrades a few hours prior to the problem. I was able to ssh into the system and get a snapshot from top: top - 08:13:54 up 210 days, 8:25, 2 users, load average: 433.30, 422.40, 375.70 Tasks: 1192 total, 381 running, 810 sleeping, 0 stopped, 1 zombie Cpu(s): 0.5%us, 6.1%sy, 0.0%ni, 93.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 49549772k total, 48518392k used, 1031380k free, 960152k buffers Swap: 11595768k total, 279368k used, 11316400k free, 39355664k cached This is a 16 processor system, so I would typically expect a load in the low teens. I tried to restart apache, which didn't work, and subsequently had to do a hard reboot to get it working again (which it is). One thing I found was that the server did an unattended package update. Is it possible that upgrading php or curl (which our web sites use) might have caused apache to stop responding? Here is the snip from the unattended-upgrades.log from this morning: 2012-09-18 06:48:30,076 INFO Initial blacklisted packages: 2012-09-18 06:48:30,076 INFO Starting unattended upgrades script 2012-09-18 06:48:30,077 INFO Allowed origins are: ["['Ubuntu', 'lucid-security']"] 2012-09-18 06:49:37,017 INFO Packages that are upgraded: gnupg-curl php5-dev linux-server dhcp3-common linux-libc-dev php5-curl gpgv gnupg linux-headers-server linux-image-server php5 php5-mysql php-pear php5-cli php5-common libapache2-mod-php5 dhcp3-client 2012-09-18 06:49:37,018 INFO Writing dpkg log to '/var/log/unattended-upgrades/unattended-upgrades-dpkg_2012-09-18_06:49:37.017909.log'

  Read the article

< Previous Page | 337 338 339 340 341 342 343 344 345 346 347 348  | Next Page >