Search Results

Search found 12061 results on 483 pages for 'non printable'.

Page 342/483 | < Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >

• Fan not detected by lm-sensors

  - by OrangeTux

  My fan is blowing hard, while my cpu temperature is 32 degrees I tried a lot of things to control my fan. Changed grub file GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi= pci=noacpi" _ GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=\"Linux\"" Ran sensors-detect : To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK Ran sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +34.0°C (crit = +90.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +34.0°C (high = +80.0°C, crit = +90.0°C) Core 2: +34.0°C (high = +80.0°C, crit = +90.0°C) Ran sudo start module-init-tools and sudo start module-init-tools module-init-tools stop/waiting As you can see my fan isn't detected. Running fancontrol gives me this: Loading configuration from /etc/fancontrol ... Error: Can't read configuration file Can you help me, please? I cannot use my laptop now in class. Thanks in advance. My system 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5400 Series] 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)

  Read the article

• Why CoffeeScript is tough to maintain

  - by Renso

  I recently started trying out CoffeeScript only to find out that it caused more headaches. The abstraction level of jQuery was perfect, it did not dictate to coders how to design their code, it just works. However, I recently posted a request to the CoffeeScript team to consider introducing curly braces to help with more complex code to control the flow of logic. For example a if-then-else with many nested levels can be near impossible to debug without tracing through it when using CoffeeScript. Also with IDEs like Visual Studio, regular JavaScript intellicense and auto-formatting make it easy to appropriate indent nested levels without any work on the part of the developer and reading it is not that hard, especially with some extensions that show vertical lines in the code editor to help see what is nested within what part of the code.However with CoffeeScript that is not the case. The samples given in the CoffeeScript web site are of course just simple examples to explain the features and one gets excited pretty quick over the powerful shortcuts. I tried to convert a piece of JavaScript over to CoffeeScript and gave up since you need to first of all remove ALL non CoffeeScript coding constructs for it to even compile. However js2coffee can help with that. However to keep track of nested levels became something that was simply not manageable using CoffeeScript.Furthermore, any coding language that controls the flow of logic by indentation is extremely dangerous for obvious reasons. I liked CoffeeScript a lot, but the fact that the logical flow of the code is controlled by how much you indent code, spaces or tabs, is not reliable as there is no way the programmer has an easy way of knowing what parts of the code will get hit when the code spans a page.When I suggested introducing curly braces in CoffeeScript the team, one contributor advised me that my code needs to be re-designed! Needless to say that is absurd. When I included a piece of the code he asked my if it was legacy code. It's like saying to a Java programmer, sorry you cannot use Java because we don't agree with how you write your code.jashkenas from the CoffeeScript blog gave some great suggestions and made the point that introducing curly braces would be very problematic for them as they use them to denote objects. Makes sense, but I would still love to see some way to replace code flow control with spaces and indentation to something more concrete and human readable.

  Read the article

• Where can I hire local programmers with very specific skillsets?

  - by Lostsoul

  I have been browsing the site and haven't found a exact fit to this question so I'll post it but if its already answered(since I'm sure its a common problem, then let me know). I have a business and want to create a totally different product in a different industry than I'm currently in, so I learned how to program and created a working prototype. I have a bit of savings and am getting some cash flow from my current business so I can go out and hire a developer(in the future hopefully it can be permenant but right now I just need a person willing to work on contract and code on weekends or their spare time and I just want to pay in cash instead of equity or future promises). At first I wasn't sure what kind of developer to hire but this question helped me understand I should target specific skills I need as opposed to general programmers. This poses a problem for me since general programmers are everywhere but if I want specific skills I'm unsure how to get them. I thought about a list of approaches but it doesn't feel complete or effective since it seems to be assuming good developers are actively looking. If it helps I want someone local(since this is my first developer hire) and looking for skills like cuda, hadoop, hbase, java and c. Any suggestions? As a FYI, I have been thinking of approaching it as: Go to meet ups for one or more skills I need. Use LinkedIn to find people with the skills I need Search for job postings that contain skills I need and then use linkedIn to reach out to that firms employees since many profiles on linkedin are not very updated or detailed but job postings generally are. Send postings to universities and maybe find a student who loves technology so much they learned these tools on their own. Post on job board. Not sure how successful it will be to post to monster. Use Craigslist, not sure if a highly skilled developer would go here for work. What am I missing? I could be wrong but it seems like good/smart/able developers aren't hunting for work non-stop(especially in this tech job market). Plus most successful people I know have work/life balance so I'm not sure if the best ones really care about code after work. Lastly, most of the skills I need aren't used in big corporations so not sure how aggressively smart developers at small shops look for work. I don’t really know any developers personally, so but should I be using the above plan or if they live balanced lives should I be looking outside of the regular resources(and instead focus on asking around my gym or my accountant or something)? Sorry, I'm making huge assumptions here, I guess because developers are a total mystery to me. I kind of wish Jane Goodall wrote a book on understanding developers social behaviour better :-p

  Read the article

• RIM's current BB7 developer toolset is a joke

  - by mbrit

  tl;dr - RIM's current developer toolset is not fit for purpose.Background to this is that I'm currently working on a PhoneGap/Cordova project for a client that has to run on BlackBerry. The tooling is so ridiculous to use that even though I had a gentle dig at them in a Guardian piece it's worth having a more full-on attack.At the moment, RIM's pitch is that apps are built for the current BBOS7 devices using WebWorks. This is an HTML-based toolset. Essentially a browser is spun up in a native app container and your app is powered by JavaScript. Specific JavaScript libraries exist that thunk down to native capabilities no the device. I happen to use PhoneCap/Cordova in combination with this.The tooling is non-existent. I'm using TextMate, Ant, and Terminal to develop the app. There's no "console.log" output, and no debugging. The only way to instrument the app is to put "alert" calls in your code.Apart from the fact that that's *not* fine in 2012, how about this… every time you deploy a new app to the device, the device has to reboot. This process takes six minutes on a relatively modern BlackBerry device. How about this as well - in order to get a file into the package it has to be signed. My small app over here has 100 different files (75 or so generated). Signing doesn't happen locally, it happens on RIM's servers in Waterloo. Thus whenever you deploy the app you have this utility have to call RIM's servers 100 times. More to the point, sometimes during the day these servers have "micro-downtime" moments where they're unreachable for five or ten minutes, normally two or three times a day. Oh yes, you'll also get an email sent to you per signing on success or failure. 100 inbound emails, per deployment.(I started this post at the beginning of one of these cycles, by the way. That's how long it takes to build and deploy *once*. By the way, the change I made didn't work.)To clarify:* Change the script,* Build it using Ant,* Ant will spin up a Java app that talks to RIM's servers to sign it.* Receive 100 emails, assuming the server is up.* App deployed - takes about 30 seconds.* BlackBerry device restarts - takes about six minutes.* Find and open the app. Go through security prompts.* Test the app, with no "console.log" output and no debugger."Why not use the simulator?" I hear you ask. Well, apart from the fact that the simulator refused to reach any network service over HTTPS that I happen to own? (Some people suggest changing DNS settings for this known issue.) Admittedly, the simulator does show you console.log, but you still have the "six minute" restart issue on the simulator.Developers will understand this problem. Breaking concentration for six-plus minutes every time you want to deploy an app turns developing into a nightmare. Combining that with no worthy debugging tools turns the toolset into a joke.

  Read the article

• Automate RAC Cluster Upgrades using EM12c

  - by HariSrinivasan

  One of the most arduous processes  in DB maintenance is upgrading Databases across major versions, especially for complex RAC Clusters.With the release of Database Plug-in  (12.1.0.5.0), EM12c Rel 3 (12.1.0.3.0)  now supports automated upgrading of RAC Clusters in addition to Standalone Databases. This automation includes: Upgrade of the complete Cluster across the nodes. ( Example: 11.1.0.7 CRS, ASM, RAC DB  ->   11.2.0.4 or 12.1.0.1 GI, RAC DB)  Best practices in tune with your operations, where you can automate upgrade in steps: Step 1: Upgrade the Clusterware to Grid Infrastructure (Allowing you to wait, test and then move to DBs). Step 2: Upgrade RAC DBs either separately or in group (Mass upgrade of RAC DB's in the cluster). Standard pre-requisite checks like Cluster Verification Utility (CVU) and RAC checks Division of Upgrade process into Non-downtime activities (like laying down the new Oracle Homes (OH), running checks) to Downtime Activities (like Upgrading Clusterware to GI, Upgrading RAC) there by lowering the downtime required. Ability to configure Back up and Restore options as a part of this upgrade process. You can choose to : a. Take Backup via this process (either Guaranteed Restore Point (GRP) or RMAN) b. Set the procedure to pause just before the upgrade step to allow you to take a custom backup c. Ignore backup completely, if there are external mechanisms already in place.  High Level Steps: Select the Procedure "Upgrade Database" from Database Provisioning Home page. Choose the Target Type for upgrade and the Destination version Pick and choose the Cluster, it picks up the complete topology since the clusterware/GI isn't upgraded already Select the Gold Image of the destination version for deploying both the GI and RAC OHs Specify new OH patch, credentials, choose the Restore and Backup options, if required provide additional pre and post scripts Set the Break points in the procedure execution to isolate Downtime activities Submit and track the procedure's execution status.  The animation below captures the steps in the wizard.  For step by step process and to understand the support matrix check this documentation link. Explore the functionality!! In the next blog, will talk about automating rolling Upgrades of Databases in Physical Standby Data Guard environment using Transient Logical Standby.

  Read the article

• Simplifying C++11 optimal parameter passing when a copy is needed

  - by Mr.C64

  It seems to me that in C++11 lots of attention was made to simplify returning values from functions and methods, i.e.: with move semantics it's possible to simply return heavy-to-copy but cheap-to-move values (while in C++98/03 the general guideline was to use output parameters via non-const references or pointers), e.g.: // C++11 style vector<string> MakeAVeryBigStringList(); // C++98/03 style void MakeAVeryBigStringList(vector<string>& result); On the other side, it seems to me that more work should be done on input parameter passing, in particular when a copy of an input parameter is needed, e.g. in constructors and setters. My understanding is that the best technique in this case is to use templates and std::forward<>, e.g. (following the pattern of this answer on C++11 optimal parameter passing): class Person { std::string m_name; public: template <class T, class = typename std::enable_if < std::is_constructible<std::string, T>::value >::type> explicit Person(T&& name) : m_name(std::forward<T>(name)) { } ... }; A similar code could be written for setters. Frankly, this code seems boilerplate and complex, and doesn't scale up well when there are more parameters (e.g. if a surname attribute is added to the above class). Would it be possible to add a new feature to C++11 to simplify code like this (just like lambdas simplify C++98/03 code with functors in several cases)? I was thinking of a syntax with some special character, like @ (since introducing a &&& in addition to && would be too much typing :) e.g.: class Person { std::string m_name; public: /* Simplified syntax to produce boilerplate code like this: template <class T, class = typename std::enable_if < std::is_constructible<std::string, T>::value >::type> */ explicit Person(std::string@ name) : m_name(name) // implicit std::forward as well { } ... }; This would be very convenient also for more complex cases involving more parameters, e.g. Person(std::string@ name, std::string@ surname) : m_name(name), m_surname(surname) { } Would it be possible to add a simplified convenient syntax like this in C++? What would be the downsides of such a syntax?

  Read the article

• Consolidating Oracle E-Business Suite R12 on Oracle's SPARC SuperCluster

  - by Giri Mandalika

  An Optimized Solution for Oracle E-Business Suite (EBS) R12 12.1.3 is now available on oracle.com.     The Oracle Optimized Solution for Oracle E-Business Suite This solution was centered around the engineered system, SPARC SuperCluster T4-4. Check the business and technical white papers along with a bunch of relevant useful resources online at the above optimized solution page for EBS. What is an Optimized Solution? Oracle's Optimized Solutions are designed, tested and fully documented architectures that are tuned for optimal performance and availability. Optimized solutions are NOT pre-packaged, fully tuned, ready-to-install software bundles that can be downloaded and installed. An optimized solution is usually a well documented architecture that was thoroughly tested on a target platform. The technical white paper details the deployed application architecture along with various observations from installing the application on target platform to its behavior and performance in highly available and scalable configurations. Oracle E-Business Suite R12 Use Case Multiple E-Business Suite R12 12.1.3 application modules were tested in this optimized solution -- Financials (online - oracle forms & web requests), Order Management (online - oracle forms & web req uests) and HRMS (online - web requests & payroll batch). The solution will be updated with additional application modules, when they are available. Oracle Solaris Cluster is responsible for the high availability portion of the solution. Performance Data For the sake of completeness, test results were also documented in the optimized solution white paper. Those test results are mainly for educational purposes only. They give good sense of application behavior under the circumstances the application was tested. Since the major focus of the optimized solution is around highly available and scalable configurations, the application was configured to me et those criteria. Hence the documented test results are not directly comparable to any other E-Business Suite performance test results published by any vendor including Oracle. Such an attempt may lead to skewed, incorrect conclusions. Questions & Requests Feel free to direct your questions to the author of the white papers. If you are a potential customer who would like to test a specific E-Business Suite application module on any non-engineered syste m such as SPARC T4-X or engineered system such as SPARC SuperCluster, contact Oracle Solution Center.

  Read the article

• Please Stop Voting Against a Candidate

  - by Brian Lanham

  DISCLAIMER:  This is not a post about “Romney” or “Obama”.  This is not a post for whom I am voting.  This is simply a post to address an issue that I cannot ignore any longer.  This two-party system that we have allowed to establish a foothold is killing this country.    More than 2 Options I was recently asked, “If you had to choose Romney or Obama who would you pick?”  I replied “Non sequiter.  The founders of this nation ensured that I never have to pick from only two candidates.”  But somehow that is the way this country’s citizens think.  I told someone last week that there are around 20 candidates for president and she was genuinely surprised.  (There are actually 25 candidates.)  She had no idea there were that many and, even though she knew there are more, she didn’t know any names beyond Romney and Obama.  Well, I am going to try and educate people like her on other options. Vote for a Candidate, not against another Candidate So this post is the first in a series with a little bit of information about each candidate for president.  I implore you…I beg you, please do your civic duty and conduct a little bit of investigation and research on your own to find the right candidate for you.  Hey, if your candidate is Romney or Obama, that’s fine.  As long as it’s an educated decision.  But please…stop voting against a candidate.  Start voting for a candidate. A List of CandidatesAs I mentioned, I am going to write a little something about each candidate and I’m going to go by alphabetical order by PARTY, then by CANDIDATE LAST NAME so as to not show any bias. P.S. – If you want to know the candidate I selected I am happy to tell you.  But that’s not what this series is about.PARTYCANDIDATEAmerica's Party   Tom HoeflingAmerican Third Position PartyMerlin MillerAmericans Elect PartyNo candidates met the requirement to enter into the online caucus.Constitution PartyVirgil GoodeDemocratic Party   Barack ObamaGrassroots Party   Jim CarlsonGreen Party   Jill SteinIndependent American Party   Will ChristensenJustice PartyRocky AndersonLibertarian Party   Gary JohnsonObjectivist PartyTom StevensPeace and Freedom Party   Roseanne BarrReform PartyAndre BarnettRepublican PartyMitt RomneySocialism and Liberation PartyPeta LindsaySocialist Equality PartyJerry WhiteSocialist Party USAStewart AlexanderSocialist Workers PartyJames HarrisIndependent Candidates Jeff BossRichard DuncanJerry Litzel Dean Morstad Jill Reed Randall TerrySheila Tittle Michael Vargo

  Read the article

• Throwing exception from a property when my object state is invalid

  - by Rumi P.

  Microsoft guidelines say: "Avoid throwing exceptions from property getters", and I normally follow that. But my application uses Linq2SQL, and there is the case where my object can be in invalid state because somebody or something wrote nonsense into the database. Consider this toy example: [Table(Name="Rectangle")] public class Rectangle { [Column(Name="ID", IsPrimaryKey = true, IsDbGenerated = true)] public int ID {get; set;} [Column(Name="firstSide")] public double firstSide {get; set;} [Column(Name="secondSide")] public double secondSide {get; set;} public double sideRatio { get { return firstSide/secondSide; } } } Here, I could write code which ensures that my application never writes a Rectangle with a zero-length side into the database. But no matter how bulletproof I make my own code, somebody could open the database with a different application and create an invalid Rectangle, especially one with a 0 for secondSide. (For this example, please forget that it is possible to design the database in a way such that writing a side length of zero into the rectangle table is impossible; my domain model is very complex and there are constraints on model state which cannot be expressed in a relational database). So, the solution I am gravitating to is to change the getter to: get { if(firstSide > 0 && secondSide > 0) return firstSide/secondSide; else throw new System.InvalidOperationException("All rectangle sides should have a positive length"); } The reasoning behind not throwing exceptions from properties is that programmers should be able to use them without having to make precautions about catching and handling them them. But in this case, I think that it is OK to continue to use this property without such precautions: if the exception is thrown because my application wrote a non-zero rectangle side into the database, then this is a serious bug. It cannot and shouldn't be handled in the application, but there should be code which prevents it. It is good that the exception is visibly thrown, because that way the bug is caught. if the exception is thrown because a different application changed the data in the database, then handling it is outside of the scope of my application. So I can't do anything about it if I catch it. Is this a good enough reasoning to get over the "avoid" part of the guideline and throw the exception? Or should I turn it into a method after all? Note that in the real code, the properties which can have an invalid state feel less like the result of a calculation, so they are "natural" properties, not methods.

  Read the article

• Liskov principle: violation by type-hinting

  - by Elias Van Ootegem

  According to the Liskov principle, a construction like the one below is invalid, as it strengthens a pre-condition. I know the example is pointless/nonsense, but when I last asked a question like this, and used a more elaborate code sample, it seemed to distract people too much from the actual question. //Data models abstract class Argument { protected $value = null; public function getValue() { return $this->value; } abstract public function setValue($val); } class Numeric extends Argument { public function setValue($val) { $this->value = $val + 0;//coerce to number return $this; } } //used here: abstract class Output { public function printValue(Argument $arg) { echo $this->format($arg); return $this; } abstract public function format(Argument $arg); } class OutputNumeric extends Output { public function format(Numeric $arg)//<-- VIOLATION! { $format = is_float($arg->getValue()) ? '%.3f' : '%d'; return sprintf($format, $arg->getValue()); } } My question is this: Why would this kind of "violation" be considered harmful? So much so that some languages, like the one I used in this example (PHP), don't even allow this? I'm not allowed to strengthen the type-hint of an abstract method but, by overriding the printValue method, I am allowed to write: class OutputNumeric extends Output { final public function printValue(Numeric $arg) { echo $this->format($arg); } public function format(Argument $arg) { $format = is_float($arg->getValue()) ? '%.3f' : '%d'; return sprintf($format, $arg->getValue()); } } But this would imply repeating myself for each and every child of Output, and makes my objects harder to reuse. I understand why the Liskov principle exists, don't get me wrong, but I find it somewhat difficult to fathom why the signature of an abstract method in an abstract class has to be adhered to so much stricter than a non-abstract method. Could someone explain to me why I'm not allowed to hind at a child class, in a child class? The way I see it, the child class OutputNumeric is a specific use-case of Output, and thus might need a specific instance of Argument, namely Numeric. Is it really so wrong of me to write code like this?

  Read the article

• Software monetization that is not evil

  - by t0x1n

  I have a free open-source project with around 800K downloads to date. I've been contacted by some monetization companies from time to time and turned them down, since I didn't want toolbar malware associated with my software. I was wondering however, is there a non-evil way to monetize software ? Here are the options as I know them: Add a donation button. I don't feel comfortable with that as I really don't need "donations" - I'm paid quite well. Donating users may feel entitled to support etc. (see the second to last bullet) Add ads inside your application. In the web that may be acceptable, but in a desktop program it looks incredibly lame. Charge a small amount for each download. This model works well in the mobile world, but I suspect no one will go for it on the desktop. It doesn't mix well with open source, though I suppose I could charge only for the binaries (most users won't go to the hassle of compiling the sources). People may expect support etc. after having explicitly paid (see next bullet). Make money off a service / community / support associated with the program. This is one route I definitely don't want to take, I don't want any sort of hassle beyond coding. I assure you, the program is top notch (albeit simple) and I'm not aware of any bugs as of yet (there are support forums and blog comments where users may report them). It is also very simple, documented, and discoverable so I do think I have a case for supplying it "as is". Add affiliate suggestions to your installer. If you use a monetization company, you lose control over what they propose. Unless you can establish some sort of strong trust with the company to supply quality suggestions (I sincerely doubt it), I can't have that. Choosing your own affiliate (e.g. directly suggesting Google Toolbar) is possibly the only viable solution to my mind. Problem is, where do I find a solid affiliate that could actually give value to the user rather than infect his computer with crapware? I thought maybe Babylon (not the toolbar of course, I hate toolbars)?

  Read the article

• Fraud and Anomaly Detection using Oracle Data Mining YouTube-like Video

  - by chberger

  I've created and recorded another YouTube-like presentation and "live" demos of Oracle Advanced Analytics Option, this time focusing on Fraud and Anomaly Detection using Oracle Data Mining.  [Note:  It is a large MP4 file that will open and play in place.  The sound quality is weak so you may need to turn up the volume.] Data is your most valuable asset. It represents the entire history of your organization and its interactions with your customers.  Predictive analytics leverages data to discover patterns, relationships and to help you even make informed predictions.   Oracle Data Mining (ODM) automatically discovers relationships hidden in data.  Predictive models and insights discovered with ODM address business problems such as:  predicting customer behavior, detecting fraud, analyzing market baskets, profiling and loyalty.  Oracle Data Mining, part of the Oracle Advanced Analytics (OAA) Option to the Oracle Database EE, embeds 12 high performance data mining algorithms in the SQL kernel of the Oracle Database. This eliminates data movement, delivers scalability and maintains security.  But, how do you find these very important needles or possibly fraudulent transactions and huge haystacks of data? Oracle Data Mining’s 1 Class Support Vector Machine algorithm is specifically designed to identify rare or anomalous records.  Oracle Data Mining's 1-Class SVM anomaly detection algorithm trains on what it believes to be considered “normal” records, build a descriptive and predictive model which can then be used to flags records that, on a multi-dimensional basis, appear to not fit in--or be different.  Combined with clustering techniques to sort transactions into more homogeneous sub-populations for more focused anomaly detection analysis and Oracle Business Intelligence, Enterprise Applications and/or real-time environments to "deploy" fraud detection, Oracle Data Mining delivers a powerful advanced analytical platform for solving important problems.  With OAA/ODM you can find suspicious expense report submissions, flag non-compliant tax submissions, fight fraud in healthcare claims and save huge amounts of money in fraudulent claims  and abuse.   This presentation and several brief demos will show Oracle Data Mining's fraud and anomaly detection capabilities.  

  Read the article

• OBIEE 11.1.1.5.0 Bundle Patch 2 is available

  - by mshahi

  Oracle BI EE 11.1.1.5.0 Bundle Patch 2 is available. The Patch number is 13611078 and it can be downloaded from Oracle Support (you can download it without password). This patch currently is available on Microsoft Windows x64 (64 bit), Linux x86 - 64 bit, IBM AIX on Power System (64 bit) and Oracle Solaris Sparc (64 bit). Remaining four platforms Win32, Linux32, HP-Itanium, and Solaris x86-64 are expected 3-4 weeks later. This Patch has thoroughly been tested and signed off by BI QA Team.  Important things to know: 1. All the customers are advised to apply this patch as it contains around 248 bug fixes. Please read the README file for all the bug fixes contained in this patch.   2. This patch can be applied via opatch. Please follow the standard process of applying this patch using opatch, i.e. stop all BI System processes via opmnctl, Stop WLS Managed and Admin Servers, Apply Patch, Start WLS Admin and Managed Servers, Check if all the J2EE applications are running fine, Start all BI System Processes via opmnctl command, and verify your fixes. It is advised to test this patch on Non Productions Instances first, run all the required tests / regressions and then move it to Production.    3. This Bundle Patch is cumulative to 11.1.1.5.0 BP1 (13562882) which was released in January 2012 on Linux x86 - 64 bit which contained around 64 bug fixes. Customers who have applied 11.1.1.5.0 BP1, will get expected OPatch conflict message, they can safely roll back BP1 prior to installing this BP2 or let opatch roll back BP1 during its application process.   4. Customer who have applied some one off patches and these one off patches are also part of 11.1.1.5.0 BP2, they can also roll back their existing one off patches after confirming that their fixes are part of BP2.    5. This Bundle Patch is not cumulative on top of 11.1.1.5.0, meaning this bundle patch does not contain all the one off fixes that were delivered on top of 11.1.1.5.0. All the remaining one off fixes delivered so far, will be available in next scheduled bundle patch i.e. 11.1.1.5.0 BP3. Please check the README file and let support know if your existing fixes are not part of BP2, so that support can open One Off Backport (OOB) request to have them included in next patch i.e. BP3.   6. 11.1.1.5.0 BP3 is in planning stages, and dates for it's availability will be announced in next couple of weeks.

  Read the article

• Are there any drawbacks to the Major.Minor.YMDD.Build version strategy?

  - by Chu

  I'm trying to come up with a good version strategy to fit our specific needs. We've proposed settling on this and I wanted to ask the question to see if anyone's experience would suggest avoiding this or altering it in any way. Here's our proposal: Versions are released in this format: MAJOR.MINOR.YMDD.BN. Here it is broken out: MAJOR & MINOR are typical; we'll increase MINOR when we feel code and new feature sets warrants it; once every few months most likely. MAJOR will increase ~yearly. YMDD: Y will be the last digit of the current year, so "1" for 2011, "2" for 2012, etc. A non-padded month will be used to keep the number smaller (9 instead of 09 for example). DD of course is the day, padded with a zero for days under 10. BN: BN is the build number and increases by one anytime we make a change to a branch of the code represented by the build, for example: If were to make a build today, our release would be version 5.0.1707.1. I release to QA today and 3 days from now QA finds that a change broke the save functionality on a page. Instead of me changing our current development code, I'd go back to the code that I used to create version 5.0.1707.1, make the fix there, then increase the BN portion of the version and would then re-release 5.0.1707.2 back to QA. In short, anytime a change is made to a branched version that isn't the active dev branch, we'd use the original version number and increase only the BN portion (even if the change happened 3 days, 3 weeks or 3 months from the initial release of that version). Anytime we make a new release from our Active dev branch, we'd come up with a new version based on the M/D of the release using the outlined strategy. We do this once every 2-3 weeks. Are there holes or pitfalls with this? If so, what are they? Thanks EDIT To clarify one point that I didn't get out very well - Oct/Nov/Dec will be two digits, it's only the year that won't be. So 9 for Sept, 10 for Oct, 11 for Nov, etc.

  Read the article

• Maximum Availability with Oracle GoldenGate

  - by Irem Radzik

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Oracle Database offers a variety of built-in and optional products for maximum availability, and it is well known for its robust high availability and disaster recovery solutions. With its heterogeneous, real-time, transactional data movement capabilities, Oracle GoldenGate is a key part of the Maximum Availability Architecture for Oracle Database. This week on Thursday Dec. 13th we will be presenting in a live webcast how Oracle GoldenGate fits into Oracle Database Maximum Availability Architecture (MAA). Joe Meeks from the Oracle Database High Availability team will discuss how Oracle GoldenGate complements other key products within MAA such as Active Data Guard. Nick Wagner from GoldenGate PM team will present how to upgrade to latest Oracle Database release without any downtime. Nick will also cover 2 new features of  Oracle GoldenGate 11gR2:  Integrated Capture for Oracle Database and Automated Conflict Detection and Resolution. Nick will provide in depth review of these new features with examples. Oracle GoldenGate also offers maximum availability for non-Oracle databases, such as HP NonStop, SQL Server, DB2 (LUW, iSeries, or zSeries) and more. The same robust, reliable real-time, bidirectional data movement capabilities apply to all supported databases.  I'd like to invite you to join us on Thursday Dec. 13th 10am PT/1pm ET to hear from the product experts on how to use GoldenGate for maximizing database availability and to ask your questions. You can find the registration link below. Webcast: Maximum Availability with Oracle GoldenGate Thursday Dec. 13th 10am PT/1pm ET Look forward to another great webcast with lots of interaction with the audience. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

  Read the article

• How to recognize an optimus laptop?

  - by kellogs

  kellogs@kellogs-K52Jc ~ $ lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 80) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 80) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 80) 03:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 80) 03:00.5 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) kellogs@kellogs-K52Jc ~ $ inxi -SGx System: Host: kellogs-K52Jc Kernel: 3.5.0-17-generic x86_64 (64 bit, gcc: 4.7.2) Desktop: KDE 4.9.5 (Qt 4.8.3) Distro: Linux Mint 14 Nadia Graphics: Card: Intel Core Processor Integrated Graphics Controller bus-ID: 00:02.0 X.Org: 1.13.0 drivers: intel (unloaded: fbdev,vesa) Resolution: [email protected] GLX Renderer: Mesa DRI Intel Ironlake Mobile GLX Version: 2.1 Mesa 9.0.3 Direct Rendering: Yes kellogs@kellogs-K52Jc ~ $ lshw [...] *-display description: VGA compatible controller product: Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 18 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:e080(size=8) Manufacturer advertises the K52Jc model which I bought as optimus enabled. However, no traces of it in the output above. Of course, Bumblebee would not start on this machine. Should I rest assured that is a defective / un-optimused machine ?

  Read the article

• SQL Saturday 43 (Redmond, WA) Review

  - by BuckWoody

  Last Saturday (June 12th) we held a “SQL Saturday” (more about those here) event in Redmond, Washington. The event was held at the Microsoft campus, at the Mixer in our new location called the “Commons”. This is a mall-like area that we have on campus, and the Mixer is a large building with lots of meeting rooms, so it made a perfect location for the event. There was a sign to find the parking, and once there they had a sign to show how to get to the building. Since it’s a secure facility, Greg Larsen and crew had a person manning the door so that even late arrivals could get in. We had about 400 sign up for the event, and a little over 300 attend (official numbers later). I think we would have had a lot more, but the sun was out – and you just can’t underestimate the effect of that here in the Pacific Northwest. We joke a lot about not seeing the sun much, but when a day like what we had on Saturday comes around, and on a weekend at that, you’d cancel your wedding to go outside to play in the sun. And your spouse would agree with you for doing it. We had some top-notch speakers, including Clifford Dibble and Kalen Delany. The food was great, we had multiple sponsors (including Confio who seems to be at all of these) and the attendees were from all over the professional spectrum, from developers to BI to DBA’s. Everyone I saw was very engaged, and when I visited room-to-room I saw almost no one in the halls – everyone was in the sessions. I also saw a much larger Microsoft presence this year, especially from Dan Jones’ team. I had a great turnout at my session, and yes, I was wearing an Oracle staff shirt. I did that because I wanted to show that the session I gave on “SQL Server for the Oracle DBA” was non-marketing – I couldn’t exactly bash Oracle wearing their colors! These events are amazing. I can’t emphasize enough how much I appreciate the volunteers and how much work they put into these events, and to you for coming. If you’re reading this and you haven’t attended one yet, definitely find out if there is one in your area – and if not, start one. It’s a lot of work, but it’s totally worth it.       Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Should custom data elements be stored as XML or database entries?

  - by meteorainer

  There are a ton of questions like this, but they are mostly very generalized, so I'd like to get some views on my specific usage. General: I'm building a new project on my own in Django. It's focus will be on small businesses. I'd like to make it somewhat customizble for my clients so they can add to their customer/invoice/employee/whatever items. My models would reflect boilerplate items that all ModelX might have. For example: first name last name email address ... Then my user's would be able to add fields for whatever data they might like. I'm still in design phase and am building this myself, so I've got some options. Working on... Right now the 'extra items' models have a FK to the generic model (Customer and CustomerDataPoints for example). All values in the extra data points are stored as char and will be coerced/parced into their actual format at view building. In this build the user could theoretically add whatever values they want, group them in sets and generally access them at will from the views relavent to that model. Pros: Low storage overhead, very extensible, searchable Cons: More sql joins My other option is to use some type of markup, or key-value pairing stored directly onto the boilerplate models. This coul essentially just be any low-overhead method weather XML or literal strings. The view and form generated from the stored data would be taking control of validation and reoganizing on updates. Then it would just dump the data back in as a char/blob/whatever. Something like: <datapoint type='char' value='something' required='true' /> <datapoint type='date' value='01/01/2001' required='false' /> ... Pros: No joins needed, Updates for validation and views are decoupled from data Cons: Much higher storage overhead, limited capacity to search on extra content So my question is: If you didn't live in the contraints impose by your company what method would you use? Why? What benefits or pitfalls do you see down the road for me as a small business trying to help other small businesses? Just to clarify, I am not asking about custom UI elements, those I can handle with forms and template snippets. I'm asking primarily about data storage and retreival of non standardized data relative to a boilerplate model.

  Read the article

• Meaning of Crawl errors

  - by com

  My question is about definition of Crawl errors in Google Webmaster Tools. Crawl errors is devided into few sections. Let's first consider HTTP section. I assume that all broken links in this section was somehow found by crawler, this is not the links from sitemap. If all this links was found by scanning pages from sitemap for links, why it doesn't mention what was the source page, like in sitemap section with column Linked From. Please correct me if I am wrong. Sitemap section. Looks like all those links came from my sitemap. But there is Linked From column, I already know, that all those broken links is from sitemap, so in order to fix the error, I should revise my sitemap. Am I wrong? Not followed section. I don't know what does it mean. Looks like it accumulates all links that caused redirect, but for some reason Google considers all those redirect as wrong redirect. Do you know if there are any set of rules how to determine wrong redirect. Actually I found were was my mistake, I tried to normalize URL and redirect it to the right URL, but I did normalization in a wrong way. Not found section. This section like HTTP section but with 404 errors. This section has Linked From column. But very often Linked From has unavailable. What does it mean, Google can not say me how it found this non existing page. How this section related to sitemap section. Does this section contains all 404 links from sitemap too. But there is too many 404 links, much more than in sitemap. I tried to take a look what we have in Linked From, and I saw that this link came from sitemap two month ago. But why Google keeps it indexed, the link is already dead, new sitemap doesn't have it. If there is any expire date for old links? Unreachable section. Looks like this section for 500 errors. This section doesn't contain Linked From column. There are too many completely meaningless links, I really don't know where this stuff came from, and without Linked From I am not able to figure out how to deal with it. Sorry for such a big topic, but I just want to make it clear, what every section stands for, because it's extremely crucial in order to deal with all those problems. Hopefully it will be useful not just for me. Thanks!

  Read the article

• What is the correct way to use g_signal_connect() in C++ for dynamic unity quicklists?

  - by hakermania

  I want to make my application use dynamic unity quicklists. For building my application I am using C++ and the QtCreator IDE. When a menu action is triggered I want to be able to have access to a non-static function of my MainWindow class so as to be able to update the Graphical User Interface which can be accessed from inside 'normal' MainWindow's functions. So, I am building up my quicklist like this (mainwindow.cpp): void MainWindow::enable_unity_quicklist(){ Unity_Menu = dbusmenu_menuitem_new(); dbusmenu_menuitem_property_set_bool (Unity_Menu, DBUSMENU_MENUITEM_PROP_VISIBLE, FALSE); Unity_Stop = dbusmenu_menuitem_new(); dbusmenu_menuitem_property_set(Unity_Stop, DBUSMENU_MENUITEM_PROP_LABEL, "Stop"); dbusmenu_menuitem_child_append (Unity_Menu, Unity_Stop); g_signal_connect (Unity_Stop, DBUSMENU_MENUITEM_SIGNAL_ITEM_ACTIVATED, G_CALLBACK(&fake_callback), (gpointer)this); if(!unity_entry) unity_entry = unity_launcher_entry_get_for_desktop_id("myapp.desktop"); unity_launcher_entry_set_quicklist(unity_entry, Unity_Menu); dbusmenu_menuitem_property_set_bool(Unity_Menu, DBUSMENU_MENUITEM_PROP_VISIBLE, true); dbusmenu_menuitem_property_set_bool(Unity_Stop, DBUSMENU_MENUITEM_PROP_VISIBLE, true); } void MainWindow::fake_callback(gpointer data){ MainWindow* m = (MainWindow*)data; m->on_stopButton_clicked(); } void MainWindow::on_stopButton_clicked(){ //stopping the process... } mainwindow.h: private slots: void enable_unity_quicklist(); void on_stopButton_clicked(); public slots: static void fake_callback(gpointer data); This suggestion was taken from http://old.nabble.com/Using-g_signal_connect-in-class-td18461823.html The program crashes immediately after I choose the 'Stop' action from the Unity Quicklist. Debugging the program shows that I am not able to access anything MainWindow related inside the on_stopButton_clicked() without crashing. For example, it crashes when doing this check (which is the first 2 lines of code inside this function): if (!ui->stopButton->isEnabled()) return; I have also tested lots of other things that I found at the internet, but nothing of them worked. One interesting solution would be to use gtkmm (http://developer.gnome.org/gtkmm-tutorial/stable/sec-connecting-signal-handlers.html.en) but I am not used at all working on GTK applications (I work solely in Qt) and I don't know if this even suits to my occasion. A compilable example indicating what the problem is can be found at: http://ubuntuone.com/7iKA3wnPmWVp8YNNDLlVQI (3.2Kb) If you are not familiar with the QtCreator IDE, you can compile with the following commands, as long as you have all the needed libraries: cd dynamic_unity_quicklists_test; qmake -project; qmake; make

  Read the article

• How to handle interruptions in developer work without losing concentration? [closed]

  - by tomaszs

  I work as a developer for some years now. Mainly the issue why it's antisocial work is because you need to spend much time programming. I've been always the kind of developer who likes to cut off from any sources of distraction and spend several hours on project because in this way i (as i hope) do it faster. There are also other kinds of developers, more social that can chat, read, watch movies while development and they are ok with this and don't hesitate to be interrupted in their work in any time and come back to the project without any problem. For me any distraction is source of frustration because i need to spend substantial time to load my mind with all info about the project and to concentrate back on the tasks. I always thought it's better to do this that way because project is completed faster. But it makes some things difficult: it's hard to chat with someone who needs to have some important info: because you are a bit frustrated when you know you loose your Zen. And sometimes its more important to chat with someone than to loose Zen. Well.. mostly in any other kind of work the ability to be "multitask" is very important. But as a developer and as a person it's also very important to stay social. And i see now that the problem of concentration makes it difficult to make the right chose: the cost of maintaining concentration is just sometimes so damn high! So is it only me that i have so little concentration skills so any interruption is for me a big deal? Maybe it's just i have so bad memory so that i dont remember all issues of a project so long? Or maybe i develop the project in a fashion that requires me to store so much info on my mind only to be able to start working with code? Or should i just accept that being more social will make me finish project slower and in the fashion that i personally consider non 100% productive? And it's just normal thing and i should just accept it and start to live like any other person who has many works and don't assume that programming is in any case other than any other work and i just do fuzz about the whole concentration thing? This is question for mid-pro developers. I think you was having the same dillema in your life. I would be glad if you could help me take the right road here because it's just driving me and i suppose people i work with crazy for years.

  Read the article

• Running C++ AMP kernels on the CPU

  - by Daniel Moth

  One of the FAQs we receive is whether C++ AMP can be used to target the CPU. For targeting multi-core we have a technology we released with VS2010 called PPL, which has had enhancements for VS 11 – that is what you should be using! FYI, it also has a Linux implementation via Intel's TBB which conforms to the same interface. When you choose to use C++ AMP, you choose to take advantage of massively parallel hardware, through accelerators like the GPU. Having said that, you can always use the accelerator class to check if you are running on a system where the is no hardware with a DirectX 11 driver, and decide what alternative code path you wish to follow.  In fact, if you do nothing in code, if the runtime does not find DX11 hardware to run your code on, it will choose the WARP accelerator which will run your code on the CPU, taking advantage of multi-core and SSE2 (depending on the CPU capabilities WARP also uses SSE3 and SSE 4.1 – it does not currently use AVX and on such systems you hopefully have a DX 11 GPU anyway). A few things to know about WARP It is our fallback CPU solution, not intended as a primary target of C++ AMP. WARP stands for Windows Advanced Rasterization Platform and you can read old info on this MSDN page on WARP. What is new in Windows 8 Developer Preview is that WARP now supports DirectCompute, which is what C++ AMP builds on. It is not currently clear if we will have a CPU fallback solution for non-Windows 8 platforms when we ship. When you create a WARP accelerator, its is_emulated property returns true. WARP does not currently support double precision.   BTW, when we refer to WARP, we refer to this accelerator described above. If we use lower case "warp", that refers to a bunch of threads that run concurrently in lock step and share the same instruction. In the VS 11 Developer Preview, the size of warp in our Ref emulator is 4 – Ref is another emulator that runs on the CPU, but it is extremely slow not intended for production, just for debugging. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• C# Dev - I've tried Lisps, but I don't get it.

  - by Jonathan Mitchem

  After a few months of learning about and playing with lisps, both CL and a bit of Clojure, I'm still not seeing a compelling reason to write anything in it instead of C#. I would really like some compelling reasons, or for someone to point out that I'm missing something really big. The strengths of a Lisp (per my research): Compact, expressive notation - More so than C#, yes... but I seem to be able to express those ideas in C# too. Implicit support for functional programming - C# with LINQ extension methods: mapcar = .Select( lambda ) mapcan = .Select( lambda ).Aggregate( (a,b) = a.Union(b) ) car/first = .First() cdr/rest = .Skip(1) .... etc. Lambda and higher-order function support - C# has this, and the syntax is arguably simpler: "(lambda (x) ( body ))" versus "x = ( body )" "#(" with "%", "%1", "%2" is nice in Clojure Method dispatch separated from the objects - C# has this through extension methods Multimethod dispatch - C# does not have this natively, but I could implement it as a function call in a few hours Code is Data (and Macros) - Maybe I haven't "gotten" macros, but I haven't seen a single example where the idea of a macro couldn't be implemented as a function; it doesn't change the "language", but I'm not sure that's a strength DSLs - Can only do it through function composition... but it works Untyped "exploratory" programming - for structs/classes, C#'s autoproperties and "object" work quite well, and you can easily escalate into stronger typing as you go along Runs on non-Windows hardware - Yeah, so? Outside of college, I've only known one person who doesn't run Windows at home, or at least a VM of Windows on *nix/Mac. (Then again, maybe this is more important than I thought and I've just been brainwashed...) The REPL for bottom-up design - Ok, I admit this is really really nice, and I miss it in C#. Things I'm missing in a Lisp (due to a mix of C#, .NET, Visual Studio, Resharper): Namespaces. Even with static methods, I like to tie them to a "class" to categorize their context (Clojure seems to have this, CL doesn't seem to.) Great compile and design-time support the type system allows me to determine "correctness" of the datastructures I pass around anything misspelled is underlined realtime; I don't have to wait until runtime to know code improvements (such as using an FP approach instead of an imperative one) are autosuggested GUI development tools: WinForms and WPF (I know Clojure has access to the Java GUI libraries, but they're entirely foreign to me.) GUI Debugging tools: breakpoints, step-in, step-over, value inspectors (text, xml, custom), watches, debug-by-thread, conditional breakpoints, call-stack window with the ability to jump to the code at any level in the stack (To be fair, my stint with Emacs+Slime seemed to provide some of this, but I'm partial to the VS GUI-driven approach) I really like the hype surrounding Lisps and I gave it a chance. But is there anything I can do in a Lisp that I can't do as well in C#? It might be a bit more verbose in C#, but I also have autocomplete. What am I missing? Why should I use Clojure/CL?

  Read the article

• Reporting on common code smells : A POC

  - by Dave Ballantyne

  Over the past few blog entries, I’ve been looking at parsing TSQL scripts in a variety of ways for a variety of tasks.  In my last entry ‘How to prevent ‘Select *’ : The elegant way’, I looked at parsing SQL to report upon uses of SELECT *.  The obvious question leading on from this is, “Great, what about other code smells ?”  Well, using the language service parser to do that was turning out to be a bit of a hard job,  sure I was getting tokens but no real context.  I wasn't even being told when an end of statement had been reached. One of the other parsing options available from Microsoft is exposed in the assembly ‘Microsoft.SqlServer.TransactSql.ScriptDom’,  this is ,I believe, installed with the client development tools with SQLServer.  It is much more feature rich than the original parser I had used and breaks a TSQL script into intuitive classes for analysis. So, what sort of smells can I now find using it ?  Well, for an opening gambit quite a nice little list. Use of NOLOCK Set of READ UNCOMMITTED Use of SELECT * Insert without column references Explicit datatype conversion on Sargs Cross server selects Non use of two-part naming convention Table and Query hint usage Changes in set options Use of single line comments Use of ordinal column positions in ORDER BY clause Now, lets not argue the point that “It depends” as smells on some of these, but as an academic exercise it is quite interesting.  The code is available from this link :https://www.dropbox.com/s/rfk32sou4fzl2cw/TSQLDomTest.zip  All the usual disclaimers apply to this code, I cannot be held responsible for anything ranging from mild annoyance through to universe destruction due to the use of this code or examples. The zip file contains a powershell script and my test cases.  The assembly used requires .Net 4 to run, which means that you will need powershell 3 ( though im running through PowerGUI and all works ok ) .  The code searches for all .sql files in the folder hierarchy for the workingpath,  you can override this if you want by simply changing the $Folder variable, and processes each in turn for the smells.  Feedback is not great at the moment, all it does is output to an xml file (Smells.xml) the offset position and a description of the smell found. Right now, I am interested in your feedback.  What do you think ?  Is this (or should it be) more than an academic exercise ?  Can tooling such as this be used as some form of code quality measure ?  Does it Work ? Do you have a case listed above which is not being reported ? Do you have a case that you would love to be reported ? Let me know , please mailto: [email protected]. Thanks

  Read the article

• Grub rescue - error: unknown filesystem

  - by user53817

  I have a multiboot system set up. The system has three drives. Multiboot is configured with Windows XP, Windows 7, and Ubuntu - all on the first drive. I had a lot of unpartitioned space left on the drive and was reserving it for adding other OSes and for storing files there in the future. One day I went ahead and downloaded Partition Wizard and created a logical NTFS partition from within Windows 7, still some unpartitioned space left over. Everything worked fine, until I rebooted the computer a few days later. Now I'm getting: error: unknown filesystem. grub rescue First of all I was surprised not to find any kind of help command, by trying: help, ?, man, --help, -h, bash, cmd, etc. Now I'm stuck with non-bootable system. I have started researching the issue and finding that people usually recommend to boot to a Live CD and fix the issue from there. Is there a way to fix this issue from within grub rescue without the need for Live CD? UPDATE By following the steps from persist commands typed to grub rescue, I was able to boot to initramfs prompt. But not anywhere further than that. So far from reading the manual on grub rescue, I was able to see my drives and partitions using ls command. For the first hard drive I see the following: (hd0) (hd0,msdos6) (hd0,msdos5) (hd0,msdos2) (hd0,msdos1) I now know that (hd0,msdos6) contains Linux on it, since ls (hd0,msdos6)/ lists directories. Others will give "error: unknown filesystem." UPDATE 2 After the following commands I am now getting to the boot menu and can boot into Windows 7 and Ubuntu, but upon reboot I have to repeat these steps. ls ls (hd0,msdos6)/ set root=(hd0,msdos6) ls / set prefix=(hd0,msdos6)/boot/grub insmod /boot/grub/linux.mod normal UPDATE 3 Thanks Shashank Singh, with your instructions I have simplified my steps to the following. I have learned from you that I can replace msdos6 with just a 6 and that I can just do insmod normal instead of insmod /boot/grub/linux.mod. Now I just need to figure out how to save this settings from within grub itself, without booting into any OS. set root=(hd0,6) set prefix=(hd0,6)/boot/grub insmod normal normal UPDATE 4 Well, it seems like it is a requirement to boot into Linux. After booting into Ubuntu I have performed the following steps described in the manual: sudo update-grub udo grub-install /dev/sda This did not resolve the issue. I still get the grub rescue prompt. What do I need to do to permanently fix it? I have also learned that drive numbers as in hd0 need to be translated to drive letters as in /dev/sda for some commands. hd1 would be sdb, hd2 would be sdc, and so on. Partitions listed in grub as (hd0,msdos6) would be translated to /dev/sda6.

  Read the article

< Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >