Search Results

Search found 9662 results on 387 pages for 'sales and operations plan'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 342/387 | < Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >

  • Configuring VLAN's on two HP procurve switches

    - by pan
    Trying to route a new ISP (Microwave link) from one of my out buildings to my computer room and hence my firewall. Old ISP came direct into firewall. In the outbuilding the Microwave modem connects with cat5 to HP Procurve 2524 switch. Because this ISP is coming through my internal network, I plan on using a new vlan called "airspeed" only for this ISP traffic. Up until now I've just been using the Default_vlan on both HP switches (4108 + 2524). So far I've been unable to ping from my laptop to the ISP modem both of which are on the new vlan 2 ("Airspeed"). No traffic needs to cross from vlan 2 to vlan 1 so I've left the ports as untagged. I've used the subnet provide from my ISP as the new vlan 2 subnet. Can anybody see what I'm doing wrong here? I've added the configuration of both switch below. Rough diagram: Microwave modem (Gateway IP 77.75.00.49) | HP 2524 switch (port 24) | HP 2524 switch fibre link | HP 4108GL switch fibre link | HP 4108GL switch (port D1) | Laptop configured with IP 77.75.00.50 (for testing but will be connected to firewall) And my 4108GL config: ; J4865A Configuration Editor; Created on release #G.07.21 hostname "HP ProCurve Switch 4108GL" cdp run module 1 type J4864A module 2 type J4862B module 3 type J4862B module 4 type J4862B ip default-gateway 128.1.146.50 snmp-server community "public" Unrestricted snmp-server host 128.1.146.51 "public" Not-INFO snmp-server host 128.1.146.38 "public" vlan 1 name "DEFAULT_VLAN" untagged A1-A3,B1-B24,C1-C24,D2-D24 ip address 128.1.146.203 255.255.0.0 no untagged D1 exit vlan 2 name "Airspeed" untagged D1 ip address 77.75.00.51 255.255.255.248 exit Finally my 2524 config: ; J4813A Configuration Editor; Created on release #F.04.08 hostname "HP ProCurve Switch 2524" cdp run ip default-gateway 0.0.0.0 snmp-server community "public" Unrestricted snmp-server host 128.1.146.51 "public" Not-INFO snmp-server host 128.1.146.51 "public" snmp-server host 128.1.146.38 "public" vlan 1 name "DEFAULT_VLAN" untagged 1-23,25-26 no untagged 24 ip address 128.1.146.204 255.255.0.0 exit vlan 2 name "Airspeed" untagged 24 ip address 77.75.00.51 255.255.255.248 exit no aaa port-access authenticator active

    Read the article

  • Apache : Illegal override option FileInfo

    - by Kave
    I have installed a new Ubuntu 12.04 Server and setup Apache and MySQL. I am just trying to replicate what I have in my current server and came across one single problem. - FileInfo Within these two files below: /etc/apache2/sites-available/default-ssl /etc/apache2/sites-available/default I need to add some overrides for the apache server. Original: <Directory /var/www/MySite> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> New: <Directory /var/www/MySite> Options Indexes FollowSymLinks MultiViews AllowOverride FileInfo, Indexes Order allow,deny allow from all </Directory> I have installed the following mods for Apache: sudo apt-get install lamp-server^ -y sudo apt-get install apache2.2-common apache2-utils openssl openssl-blacklist openssl-blacklist-extra -y sudo apt-get install curl libcurl3 libcurl3-dev php5-curl -y sudo apt-get install php5-tidy -y sudo apt-get install php5-gd -y sudo apt-get install php-apc -y sudo apt-get install memcached -y sudo apt-get install php5-memcache -y sudo a2enmod ssl sudo a2enmod rewrite sudo a2enmod headers sudo a2enmod expires sudo a2enmod php5 So When I do a restart with AllowOverride None, its all ok. sudo /etc/init.d/apache2 restart * Restarting web server apache2 ... waiting [OK] But as soon as I change the AllowOverride to FileInfo, Indexes Syntax error on line 11 of /etc/apache2/sites-enabled/000-default: Illegal override option FileInfo, Action 'configtest' failed. The Apache error log may have more information. ...fail! I can't see anything unusual in the error.log [Wed Jun 06 08:23:51 2012] [notice] caught SIGTERM, shutting down [Wed Jun 06 08:23:52 2012] [warn] RSA server certificate CommonName (CN) `mySite.com' does NOT match server name!? [Wed Jun 06 08:23:52 2012] [warn] RSA server certificate CommonName (CN) `mySite.com' does NOT match server name!? [Wed Jun 06 08:23:52 2012] [notice] Apache/2.2.22 (Ubuntu) PHP/5.3.10-1ubuntu3.1 with Suhosin-Patch mod_ssl/2.2.22 OpenSSL/1.0.1 configured -- resuming normal operations I get that warning because its a test server, nonetheless I get the same warning with AllowOverride None and yet it restarts the Apache server correctly. Therefore this warning should be harmless. Have I missed something? Thanks,

    Read the article

  • PHP 5.3.2 + Fcgid 2.3.5 + Apache 2.2.14 + SuExec => Connection reset by peer: mod_fcgid: error reading data from FastCGI server

    - by Zigzag
    I'm trying to use PHP 5.3.2 + Fcgid 2.3.5 + Apache 2.2.14 but I always have the error : "Connection reset by peer: mod_fcgid: error reading data from FastCGI server". And Apache returns an error 500 each time I tried to execute a php page : I have compiled the Apache with this options: ./configure --with-mpm=worker --enable-userdir=shared --enable-actions=shared --enable-alias=shared --enable-auth=shared --enable-so --enable-deflate \ --enable-cache=shared --enable-disk-cache=shared --enable-info=shared --enable-rewrite=shared \ --enable-suexec=shared --with-suexec-caller=www-data --with-suexec-userdir=site --with-suexec-logfile=/usr/local/apache2/logs/suexec.log --with-suexec-docroot=/home Then PHP: ./configure --with-config-file-path=/usr/local/apache2/php --with-apxs2=/usr/local/apache2/bin/apxs --with-mysql --with-zlib --enable-exif --with-gd --enable-cgi Then FCdigd: APXS=/usr/local/apache2/bin/apxs ./configure.apxs The VHOST is: <Directory /home/website_panel/site/> FCGIWrapper /home/website_panel/cgi/php .php ... ErrorLog /home/website_panel/logs/error.log </Directory> cat /home/website_panel/logs/error.log [Sun Mar 07 22:19:41 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:41 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php [Sun Mar 07 22:19:41 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:41 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php [Sun Mar 07 22:19:42 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:42 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php [Sun Mar 07 22:19:43 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:43 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php The Suexec log: root:/usr/local/apache2# cat /var/log/apache2/suexec.log [2010-03-07 22:11:05]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:11:15]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:11:23]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:41]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:41]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:42]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:43]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php root:/usr/local/apache2# cat logs/error_log [Sun Mar 07 22:18:47 2010] [notice] suEXEC mechanism enabled (wrapper: /usr/local/apache2/bin/suexec) [Sun Mar 07 22:18:47 2010] [notice] mod_bw : Memory Allocated 0 bytes (each conf takes 32 bytes) [Sun Mar 07 22:18:47 2010] [notice] mod_bw : Version 0.7 - Initialized [0 Confs] [Sun Mar 07 22:18:47 2010] [notice] Apache/2.2.14 (Unix) mod_fcgid/2.3.5 configured -- resuming normal operations root:/usr/local/apache2# /home/website_panel/cgi/php -v PHP 5.3.2 (cli) (built: Mar 7 2010 16:01:49) Copyright (c) 1997-2010 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies If someone has got an idea, I want to hear it ^^ Thanks !

    Read the article

  • How to transition to Comcast with static IP address

    - by steveha
    I have my own email server in my house, on a static IP address. I have had business DSL for over a decade, but I also now have Comcast business Internet. I want to transition from the DSL to the Comcast, and I have some questions. I have a domain name, my own mail server, and a firewall (a PC with two network interfaces, running Devil-Linux). I need to make sure I understand how to set up the Comcast cable box, and how to set up my firewall. First, do I need to change any settings in the cable box? Currently I have only used the cable box by plugging in a laptop, with the laptop doing DHCP. I think I can leave the box alone but I would like to make sure. Second, I'm not sure I understand the instructions Comcast gave me for setting up the firewall. My DSL provider gave me the following information: static IP address, net mask, gateway, and two DNS servers. Comcast gave me: static IP address, routable static IP address, net mask, and two DNS servers, and told me to put the "static IP address" as the "gateway" on the firewall. Is this just Comcast-speak here? Does "routable static IP address" mean the same thing as "static IP address" in my DSL setup, the end-point address that I should publish in the DNS MX records for my email server? Or should I publish the "static IP address", and Comcast will then route all its traffic over the cable box? My plan is: first, I'm going to configure another firewall, so I have one firewall for the DSL and one for the Comcast (rather than madly editing settings to switch back and forth). Then I will publish the new Comcast static IP address as a backup email server address in the DNS MX records, wait a while to let it propagate, and then switch my home over from the DSL to the Comcast. Then I'll change DNS to make that the primary mail address and the DSL the secondary, let that go a while and make sure it seems reliable. Then I'll remove the DSL from the DNS MX records completely, and finally shut down the DSL service. (I thought about keeping the DSL as a backup, but the reason I'm leaving DSL is that it has become unreliable; and I have heard that Comcast business Internet is reliable.) Final question, any advice for me? Anything you think might be useful, helpful, or educational. Thanks.

    Read the article

  • Apache taking up too much CPU

    - by andrewtweber
    I'm trying to manage a server on Amazon for a network of sites that receives about 100 million pageviews per month. Unfortunately, nobody out of my team of 5 developers has much server admin experience. Right now we have the MaxClients set to 1400. Currently our traffic is about average, and we have 1150 total Apache processes running, which use about 2% CPU each! Out of those 1150, 800 of them are currently sleeping, but still taking up CPU. I'm sure there are ways to optimize this. I have a few thoughts: It appears Apache is creating a new process for every single connection. Is this normal? Is there a way to more quickly kill the sleeping processes? Should we turn KeepAlive on? Each page loads about 15-20 medium-sized graphics and a lot of javascript/css. So, here's our Apache setup. We do plan on contracting a server admin asap, but I would really appreciate some advice until we can find someone. Timeout 25 KeepAlive Off MaxKeepAliveRequests 200 KeepAliveTimeout 5 <IfModule prefork.c> StartServers 100 MinSpareServers 20 MaxSpareServers 50 ServerLimit 1400 MaxClients 1400 MaxRequestsPerChild 5000 </IfModule> <IfModule worker.c> StartServers 4 MaxClients 400 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> Full top output: top - 23:44:36 up 1 day, 6:43, 4 users, load average: 379.14, 379.17, 377.22 Tasks: 1153 total, 379 running, 774 sleeping, 0 stopped, 0 zombie Cpu(s): 71.9%us, 26.2%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 1.9%si, 0.0%st Mem: 70343000k total, 23768448k used, 46574552k free, 527376k buffers Swap: 0k total, 0k used, 0k free, 10054596k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1756 mysql 20 0 10.2g 1.8g 5256 S 19.8 2.7 904:41.13 mysqld 21515 apache 20 0 396m 18m 4512 R 2.1 0.0 0:34.42 httpd 21524 apache 20 0 396m 18m 4032 R 2.1 0.0 0:32.63 httpd 21544 apache 20 0 394m 16m 4084 R 2.1 0.0 0:36.38 httpd 21643 apache 20 0 396m 18m 4360 R 2.1 0.0 0:34.20 httpd 21817 apache 20 0 396m 17m 4064 R 2.1 0.0 0:38.22 httpd 22134 apache 20 0 395m 17m 4584 R 2.1 0.0 0:35.62 httpd 22211 apache 20 0 397m 18m 4104 R 2.1 0.0 0:29.91 httpd 22267 apache 20 0 396m 18m 4636 R 2.1 0.0 0:35.29 httpd 22334 apache 20 0 397m 18m 4096 R 2.1 0.0 0:34.86 httpd 22549 apache 20 0 395m 17m 4056 R 2.1 0.0 0:31.01 httpd 22612 apache 20 0 397m 19m 4152 R 2.1 0.0 0:34.34 httpd 22721 apache 20 0 396m 18m 4060 R 2.1 0.0 0:32.76 httpd 22932 apache 20 0 396m 17m 4020 R 2.1 0.0 0:37.34 httpd 22933 apache 20 0 396m 18m 4060 R 2.1 0.0 0:34.77 httpd 22949 apache 20 0 396m 18m 4060 R 2.1 0.0 0:34.61 httpd 22956 apache 20 0 402m 24m 4072 R 2.1 0.0 0:41.45 httpd

    Read the article

  • Cannot exclude a path from basic auth when using a front controller script

    - by Adam Monsen
    I have a small PHP/Apache2 web application wherein I'd like to do two seemingly incompatible operations: Route all requests through a single PHP script (a "front controller", if you will) Secure everything except API calls with HTTP basic authentication I can satisfy either requirement just fine in isolation, it's when I try to do both at once that I am blocked. For no good reason I'm trying to accomplish these requirements solely with Apache configuration. Here are the requirements stated as an example. A GET request for this URL: http://basic/api/listcars?max=10 should be sent through front.php without requiring basic auth. front.php will get /api/listcars?max=10 and do whatever it needs to with that. Here's what I think should work. In my /etc/hosts I added 127.0.0.1 basic and I am using this Apache config: <Location /> AuthType Basic AuthName "Home Secure" AuthUserFile /etc/apache2/passwords require valid-user </Location> <VirtualHost *:80> ServerName basic DocumentRoot /var/www/basic <Directory /var/www/basic> <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{SCRIPT_FILENAME} !-f RewriteCond %{SCRIPT_FILENAME} !-d RewriteRule ^(.*)$ /front.php/$1 [QSA,L] </IfModule> </Directory> <Location /api> Order deny,allow Allow from all Satisfy any </Location> </VirtualHost> But I still always get a HTTP 401: Authorization Required response. I can make it work by changing <Location /api> into <Location ~ /api> but this allows more than I want to past basic auth. I also tried changing the <Directory /var/www/basic> section into <Location />, but this doesn't work either (and it results in some strange values for PATH_TRANSLATED being passed to the script). I searched around and found many examples of selective exclusion of basic auth, but none that also incorporated a front controller. I could certainly do something like handle basic auth in the front controller, but if I can have Apache do that instead I'll be able to keep all authentication logic out of my PHP code. A friend suggested splitting this into two vhosts, which I know also works. This used to be two separate vhosts, actually. I'm using Apache 2.2.22 / PHP 5.3.10 on Ubuntu 12.04.

    Read the article

  • How to transition to Comcast with static IP address [migrated]

    - by steveha
    I have my own email server in my house, on a static IP address. I have had business DSL for over a decade, but I also now have Comcast business Internet. I want to transition from the DSL to the Comcast, and I have some questions. I have a domain name, my own mail server, and a firewall (a PC with two network interfaces, running Devil-Linux). I need to make sure I understand how to set up the Comcast cable box, and how to set up my firewall. First, do I need to change any settings in the cable box? Currently I have only used the cable box by plugging in a laptop, with the laptop doing DHCP. I think I can leave the box alone but I would like to make sure. Second, I'm not sure I understand the instructions Comcast gave me for setting up the firewall. My DSL provider gave me the following information: static IP address, net mask, gateway, and two DNS servers. Comcast gave me: static IP address, routable static IP address, net mask, and two DNS servers, and told me to put the "static IP address" as the "gateway" on the firewall. Is this just Comcast-speak here? Does "routable static IP address" mean the same thing as "static IP address" in my DSL setup, the end-point address that I should publish in the DNS MX records for my email server? Or should I publish the "static IP address", and Comcast will then route all its traffic over the cable box? My plan is: first, I'm going to configure another firewall, so I have one firewall for the DSL and one for the Comcast (rather than madly editing settings to switch back and forth). Then I will publish the new Comcast static IP address as a backup email server address in the DNS MX records, wait a while to let it propagate, and then switch my home over from the DSL to the Comcast. Then I'll change DNS to make that the primary mail address and the DSL the secondary, let that go a while and make sure it seems reliable. Then I'll remove the DSL from the DNS MX records completely, and finally shut down the DSL service. (I thought about keeping the DSL as a backup, but the reason I'm leaving DSL is that it has become unreliable; and I have heard that Comcast business Internet is reliable.) Final question, any advice for me? Anything you think might be useful, helpful, or educational. Thanks.

    Read the article

  • dnsmasq acts as the DHCP server for selected nodes overriding the existing DHCP server on the same LAN?

    - by user183394
    I am trying to set up a small "lab" at home. Like many modern homes, I have a regular DSL service which comes with a 2Wire 3600HGV router, which acts also as a DHCP server. Since I would like to PXE boot a few computers in my "lab" The 2Wire is inflexible to adjustments that I want to do I have used dnsmasq at work so I would like to use dnsmasq as the DHCP server for the few nodes in my "lab" if feasible. In the dnsmasq man page, there is the following: [...] -K, --dhcp-authoritative (IPv4 only) Should be set when dnsmasq is definitely the only DHCP server on a network. It changes the behaviour from strict RFC compliance so that DHCP requests on unknown leases from unknown hosts are not ignored. This allows new hosts to get a lease without a tedious timeout under all circumstances. It also allows dnsmasq to rebuild its lease database without each client needing to reacquire a lease, if the database is lost. [...] As far as I know, the ISC DHCP server can use the following to do what I would like to accomplish: authoritative; [...] subnet 192.168.1.0 netmask 255.255.255.0 { host nb0 { # only give DHCP information to this computer: hardware ethernet e8:9a:8f:17:70:42; fixed-address 192.168.1.10; option subnet-mask 255.255.255.0; option routers 192.168.1.254; option domain-name-servers 192.168.1.254; # Non-essential DHCP options filename "/pxelinux.0"; } [...] But I much prefer dnsmasq's "all-in-one-ness". My question: do I have to couple the -K option with something else? As shown in the example above, the ISC DHCP server requires the mac addresses of managed nodes to be explicitly specified. Does dnsmasq have something similar? FYI, the machine on which I plan to run dnsmasq runs CentOS 6.3 64bit. It has a statically assigned IP address: 192.168.1.3.

    Read the article

  • Subversion vision and roadmap

    - by gbjbaanb
    Recently C Michael Pilato of the core subversion team posted a mail to the subversion dev mailing list suggesting a vision and roadmap for the future of Subversion. Naturally, he wanted as much feedback and response as possible which is why I'm posting this here - to elicit some suggestions and contributions from you, the administrators of Subversion. Any comments are welcome, and I shall feedback a synopsis with a link to this question to the dev mailing list. Similarly, I've created a post on StackOverflow to get feedback from the programmer/user side of things too. So, without further ado: Vision The first thing on his "vision statement" is: Subversion has no future as a DVCS tool. Let's just get that out there. At least two very successful such tools exist already, and to squeeze another horse into that race would be a poor investment of energy and talent. There's no need to suggest distributed features for subversion. If you want a DVCS, there should be no ill-feeling if you migrate to Git, Mercurial or Bazaar. As he says, its pointless trying to make SVN like them when they already exist, especially when there are different usage patterns that SVN should be targetting. The vision for Subversion is: Subversion exists to be universally recognized and adopted as an open-source, centralized version control system characterized by its reliability as a safe haven for valuable data; the simplicity of its model and usage; and its ability to support the needs of a wide variety of users and projects, from individuals to large-scale enterprise operations. Roadmap Several ideas were suggested as being "very nice to have" and are offered as the starting point of a future roadmap. These are: Obliterate Shelve/Checkpoint Repository-dictated Configuration Rename Tracking Improved Merging Improved Tree Conflict Handling Enterprise Authentication Mechanisms Forward History Searching Log Message Templates Repository-dictated Configuration If anyone has suggestions to add, or comments on these, the subversion community would welcome all of them. Community And lastly, there was a call for more people to become involved with Subversion development. As with most OSS projects it can be daunting to join, but there is now a push for more to be done to help. If you feel like you can contribute, please do so.

    Read the article

  • Persistent Issues on small business network using Cisco 871W and Catalyst Express 500

    - by Ben Campbell
    Being the most qualified (read: still not qualified) to solve our persistant network issues, I've turned to serverfault for guidance. I've done some searching, reading related documentation on cisco.com and tried a bit of troubleshooting. Here is the config: 100mb synchronous connection from a business internet provider (tested multiple times at 100meg at the source) Cisco 871W wireless point & router is where the WAN connection starts (this serves all our wireless). The only wired connection in the 871W is the Catalyst switch listed below. Cisco Catalyst Express 500 (24TT) is where all the wired connections terminate. About 20 Windows workstations and servers (AD/Webservers only). Some services in EC2 including mail and other web servers/apps. I've been TOLD cabling internally should be gigabit-ready. Here are the problems: generally slow download rates from the internet to the desktop/laptop frequent "page cannot be displayed" errors in browsers-sometimes 3 or 4 reloads are necessary... often times CSS wont load or other content requiring the browser to connect to a different server. slow speed within the LAN from workstation to workstation copying files. I would expect extremely fast data transfer workstation to workstation / server to workstation in this simple network. Several things I need to admit: I'm not primarily a network guy. Funding is relatively low, I need to be the guy that finds the solution. I understand most of the terminology and most of the technology. Implementation is where I fail due to lack of experience. Getting to the point: I'm wondering whether experienced network admins think that our small network should be sufficiently served with our current hardware if configured properly... or if we should purchase new equipment and start fresh? If starting fresh is the plan, whatever that new equipment may be is a likely different question entirely. If I haven't provided enough information, I will happily do some troubleshooting and update with the results. I have experience using wireshark and some other tools. Please let me know what you think would be most helpful and thanks in advance. EDIT: I forgot to add that the Cisco applicance will not finish loading the SDM Express console. It hangs every time at the "populating modules... DHCP". It eventually crashes and closes. I've rebooted the hardware and this still happens.

    Read the article

  • PHP 5.3.2 + Fcgid 2.3.5 + Apache 2.2.14 + SuExec => Connection reset by peer: mod_fcgid: error readi

    - by Zigzag
    Hi, I'm trying to use PHP 5.3.2 + Fcgid 2.3.5 + Apache 2.2.14 but I always have the error : "Connection reset by peer: mod_fcgid: error reading data from FastCGI server". And Apache returns an error 500 each time I tried to execute a php page : I have compiled the Apache with this options: ./configure --with-mpm=worker --enable-userdir=shared --enable-actions=shared --enable-alias=shared --enable-auth=shared --enable-so --enable-deflate \ --enable-cache=shared --enable-disk-cache=shared --enable-info=shared --enable-rewrite=shared \ --enable-suexec=shared --with-suexec-caller=www-data --with-suexec-userdir=site --with-suexec-logfile=/usr/local/apache2/logs/suexec.log --with-suexec-docroot=/home Then PHP: ./configure --with-config-file-path=/usr/local/apache2/php --with-apxs2=/usr/local/apache2/bin/apxs --with-mysql --with-zlib --enable-exif --with-gd --enable-cgi Then FCdigd: APXS=/usr/local/apache2/bin/apxs ./configure.apxs The VHOST is: <Directory /home/website_panel/site/> FCGIWrapper /home/website_panel/cgi/php .php ... ErrorLog /home/website_panel/logs/error.log </Directory> cat /home/website_panel/logs/error.log [Sun Mar 07 22:19:41 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:41 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php [Sun Mar 07 22:19:41 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:41 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php [Sun Mar 07 22:19:42 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:42 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php [Sun Mar 07 22:19:43 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:43 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php The Suexec log: root:/usr/local/apache2# cat /var/log/apache2/suexec.log [2010-03-07 22:11:05]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:11:15]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:11:23]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:41]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:41]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:42]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:43]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php root:/usr/local/apache2# cat logs/error_log [Sun Mar 07 22:18:47 2010] [notice] suEXEC mechanism enabled (wrapper: /usr/local/apache2/bin/suexec) [Sun Mar 07 22:18:47 2010] [notice] mod_bw : Memory Allocated 0 bytes (each conf takes 32 bytes) [Sun Mar 07 22:18:47 2010] [notice] mod_bw : Version 0.7 - Initialized [0 Confs] [Sun Mar 07 22:18:47 2010] [notice] Apache/2.2.14 (Unix) mod_fcgid/2.3.5 configured -- resuming normal operations root:/usr/local/apache2# /home/website_panel/cgi/php -v PHP 5.3.2 (cli) (built: Mar 7 2010 16:01:49) Copyright (c) 1997-2010 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies If someone has got an idea, I want to hear it ^^ Thanks !

    Read the article

  • Slow Windows Explorer on Windows 7

    - by MadBoy
    I have Laptop with i7 (4 cores), 8GB ram and SSD OCZ Vertex 3 MaxIOPS which in testing that I did just now does 400mb/s+ read/write. However the responsiveness of Windows Explorer is far from being perfect. Opening up Computer, Documents, going into folders is very slow (1-5seconds). I don't have any viruses or spyware and I have tried changing properties to optimize view for General Items. I tried disabling Search Indexer but it made search in Outlook 2010 crawl and didn't bring any other effect. Even double clicking on file takes some time to open things up (like clicking a Word document). I don't have any drives mapped, my computer is not joined to domain. I have multiple VPN connections that I connect to but they all have disabled default gateways. I tried using CC Cleaner or some Windows 7 Tweaks app to disable some things. I am power user using Visual Studio, Tortoise SVN and other developer/administration apps. Any non obvious ideas? Edit: So I've been trying to pinpoint where the issue comes from and it seems that straight after reboot Windows Explorer opens very fast, when I load 3-4 programs (Royal TS, Visual Studio, Outlook) it's noticeably slower and the more programs I have it gets worse. After I start closing programs it starts working better and if I leave 2 open it's fast again. I tried doing some research with DiskMon and other programs from sysinternals but couldn't find anything suspicious. Below are stats during normal usage with a lots of programs open: - Ram usage with a lot of programs open and no swap file (i disabled it for testing): 6.95GB - CPU usage: 15%, none of the cores takes more then 50% (I have VS 2010 open x 4) HD Tune Pro: OCZ-VERTEX3 MI Benchmark Test capacity: full Read transfer rate Transfer Rate Minimum : 363.9 MB/s Transfer Rate Maximum : 505.5 MB/s Transfer Rate Average : Access Time : Burst Rate : CPU Usage : HD Tune Pro: OCZ-VERTEX3 MI File Benchmark Drive C: Transfer rate test File Size: 500 MB Sequential read 484102 KB/s Sequential write 444714 KB/s Random read 7779 IOPS Random write 16888 IOPS Random read (queue depth = 32) 73007 IOPS Random write (queue depth = 32) 69790 IOPS HD Tune Pro: OCZ-VERTEX3 MI Random Access Test capacity: full Read test Transfer size operations / sec avg. access time max. access time avg. speed 512 bytes 3260 IOPS 0.306 ms 2.106 ms 1.592 MB/s 4 KB 4161 IOPS 0.240 ms 2.006 ms 16.256 MB/s 64 KB 2382 IOPS 0.419 ms 2.367 ms 148.934 MB/s 1 MB 449 IOPS 2.225 ms 4.197 ms 449.407 MB/s Random 809 IOPS 1.235 ms 6.551 ms 410.527 MB/s HD Tune Pro: OCZ-VERTEX3 MI Extra Tests Test capacity: full Random seek 3975 IOPS 0.252 ms 1.941 MB/s Random seek 4 KB 4245 IOPS 0.236 ms 16.583 MB/s Butterfly seek 4086 IOPS 0.245 ms 1.995 MB/s Random seek / size 64 KB 3812 IOPS 0.262 ms 58.606 MB/s Random seek / size 8 MB 120 IOPS 8.348 ms 485.737 MB/s Sequential outer 4524 IOPS 0.221 ms 282.721 MB/s Sequential middle 4429 IOPS 0.226 ms 276.818 MB/s Sequential inner 5504 IOPS 0.182 ms 344.000 MB/s Burst rate 4472 IOPS 0.224 ms 279.475 MB/s

    Read the article

  • Benchmark MySQL Cluster using flexAsynch: No free node id found for mysqld(API)?

    - by quanta
    I am going to benchmark MySQL Cluster using flexAsynch follow this guide, details as below: mkdir /usr/local/mysqlc732/ cd /usr/local/src/mysql-cluster-gpl-7.3.2 cmake . -DCMAKE_INSTALL_PREFIX=/usr/local/mysqlc732/ -DWITH_NDB_TEST=ON make make install Everything works fine until this step: # /usr/local/mysqlc732/bin/flexAsynch -t 1 -p 80 -l 2 -o 100 -c 100 -n FLEXASYNCH - Starting normal mode Perform benchmark of insert, update and delete transactions 1 number of concurrent threads 80 number of parallel operation per thread 100 transaction(s) per round 2 iterations Load Factor is 80% 25 attributes per table 1 is the number of 32 bit words per attribute Tables are with logging Transactions are executed with hint provided No force send is used, adaptive algorithm used Key Errors are disallowed Temporary Resource Errors are allowed Insufficient Space Errors are disallowed Node Recovery Errors are allowed Overload Errors are allowed Timeout Errors are allowed Internal NDB Errors are allowed User logic reported Errors are allowed Application Errors are disallowed Using table name TAB0 NDBT_ProgramExit: 1 - Failed ndb_cluster.log: WARNING -- Failed to allocate nodeid for API at 127.0.0.1. Returned eror: 'No free node id found for mysqld(API).' I also have recompiled with -DWITH_DEBUG=1 -DWITH_NDB_DEBUG=1. How can I run flexAsynch in the debug mode? # /usr/local/mysqlc732/bin/flexAsynch -h FLEXASYNCH Perform benchmark of insert, update and delete transactions Arguments: -t Number of threads to start, default 1 -p Number of parallel transactions per thread, default 32 -o Number of transactions per loop, default 500 -l Number of loops to run, default 1, 0=infinite -load_factor Number Load factor in index in percent (40 -> 99) -a Number of attributes, default 25 -c Number of operations per transaction -s Size of each attribute, default 1 (PK is always of size 1, independent of this value) -simple Use simple read to read from database -dirty Use dirty read to read from database -write Use writeTuple in insert and update -n Use standard table names -no_table_create Don't create tables in db -temp Create table(s) without logging -no_hint Don't give hint on where to execute transaction coordinator -adaptive Use adaptive send algorithm (default) -force Force send when communicating -non_adaptive Send at a 10 millisecond interval -local 1 = each thread its own node, 2 = round robin on node per parallel trans 3 = random node per parallel trans -ndbrecord Use NDB Record -r Number of extra loops -insert Only run inserts on standard table -read Only run reads on standard table -update Only run updates on standard table -delete Only run deletes on standard table -create_table Only run Create Table of standard table -drop_table Only run Drop Table on standard table -warmup_time Warmup Time before measurement starts -execution_time Execution Time where measurement is done -cooldown_time Cooldown time after measurement completed -table Number of standard table, default 0

    Read the article

  • Certain clients (IP range) can not ping server

    - by Logman
    I just virtualized a Windows 2003 Server SP2 x32. The server contained our help desk server (Spiceworks) and our anti virus management server (ESET RAC). The host computer actually contained the virtualized server originally; I created the vhd and then I wiped this system clean and installed Windows 2008 R2 x64 Datacenter and added the virtualized 2003 onto the Hyper-V 2008 R2 Server. I got the server running fine except for... certain ip ranges. Local clients can get updates from the AV server from my 192.168.180.xxx & 192.168.181.xxx BUT NOT from any 192.168.182.xxx, 192.168.183.xxx, 192.168.184.xxx etc... I can not ping the server from any clients except for the 180. & 181. ranges. Now I created 2 other virtualized servers (win2008 & a win7 pro) and they exist on the same virtual host as the 2003 server. And at first I could not ping those until I went to the "\Network and Sharing Center\Advanced sharing settings" and Turned On File and Print Sharing. Then I could ping and access those virtualized guests. Win2003 server isn't quite the same. But I am sure I have it on. But now when I ping from a client on one of those ranges that would not work I get this: As you can see the ping leaves our network. We have 2 ad/dns servers (one 180. & the other in the 181. range). Is it DNS? Both AD/DNS servers are Windows 2003. And we plan on upgrading both to 2008 R2 within a month or two but I need to fix this issue pronto (esp the AV end). btw, I did rename that 2003 Server (Spiceworks/AV) hostname. And I tried a CNAME. But I do not think that is the problem. EDIT: OR because this server existed on this hardware/computer before becoming virtualized?

    Read the article

  • SSH_ORIGINAL_ENVIRONMENT error with snow leopard client to a gitosis server on debian

    - by Mica
    I have a server running gitosis (installed from the package manager) on debian lenny. I am able to perform all operations from my linux mint laptop, but from my Mac running an up-to-date Snow Leopard gives me the following error: mica@waste Desktop$ git clone [email protected]:Poems.git Initialized empty Git repository in /Users/micas/Desktop/Poems/.git/ ERROR:gitosis.serve.main:Repository read access denied fatal: The remote end hung up unexpectedly mica@waste Desktop$ ssh -v [email protected] OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug1: Connecting to 192.168.0.156 [192.168.0.156] port 22. debug1: Connection established. debug1: identity file /Users/micas/.ssh/identity type -1 debug1: identity file /Users/micas/.ssh/id_rsa type 1 debug1: identity file /Users/micas/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '192.168.0.156' is known and matches the RSA host key. debug1: Found key in /Users/mica/.ssh/known_hosts:5 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Offering public key: /Users/mica/.ssh/id_rsa debug1: Remote: Forced command: gitosis-serve mica@waste debug1: Remote: Port forwarding disabled. debug1: Remote: X11 forwarding disabled. debug1: Remote: Agent forwarding disabled. debug1: Remote: Pty allocation disabled. debug1: Server accepts key: pkalg ssh-rsa blen 277 debug1: Remote: Forced command: gitosis-serve micas@waste debug1: Remote: Port forwarding disabled. debug1: Remote: X11 forwarding disabled. debug1: Remote: Agent forwarding disabled. debug1: Remote: Pty allocation disabled. debug1: Authentication succeeded (publickey). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Requesting authentication agent forwarding. PTY allocation request failed on channel 0 ERROR:gitosis.serve.main:Need SSH_ORIGINAL_COMMAND in environment. debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: client_input_channel_req: channel 0 rtype [email protected] reply 0 debug1: channel 0: free: client-session, nchannels 1 Connection to 192.168.0.156 closed. Transferred: sent 2544, received 2888 bytes, in 0.1 seconds Bytes per second: sent 29642.1, received 33650.3 debug1: Exit status 1 Extensive googling of the error isn't returning much-- I changed the /etc/sshd_config file on my Mac as per http://www.schmidp.com/2009/06/23/enable-ssh-agent-key-forwarding-on-snow-leopard/. I still get the same error.

    Read the article

  • Web Site Serving, Cloud-Computing, oh, my

    - by Frank
    I'm planning a software based service. To give it a bit of context (type of traffic), assume it similar to facebook in nature (with a little GitHub thrown in). I've been trying to understand my different hosting options. I've been using a shared host with GoDaddy for years just fine. I currently host a Wordpress web site there and I've not had any problems. Quite frankly, they've taken good care of me. However, the nature of a shared hosting environment is limited in nature. For example, I can't do anything but host a web site there. For example, I can not run a Mercurial server. Last time I attempted to build a web application with the intention of eventually launching it via GoDaddy, I ran in to all sorts of troubles because it was shared-hosted. Assembly issues, etc. At the time, the cost and time sank my project. (The lack of direct access was also frustrating.) (to be fair to godaddy, this was over 3 years ago) I've been looking at Rackspace or Amazon as a possible cloud solution but it seems to be just processing power and bandwidth (and an OS). From what I understand, I'd need to get Apache and MySQL Working on my own. The way cloud hosting is priced, however, seems appealing. I figure my final option might be to use a virtual private host. I think this would be more flexible than a shared-host site but less scalable than a cloud based server. So, I guess my question is what is an appropriate solution for someone who intends to build a web application service? I figure that I need to establish a hosting environment now rather than later so I can plan to effectively use the environment. I'd prefer to be fairly economical to start out with. I really can't afford to pay $999 (or even $99) while I build up the site and get the core functionality online but at the same time, I'd like to have the selected environment grow as needed. Thank you.

    Read the article

  • broken apache .htaccess (mod_rewrite)

    - by Tim
    Hey there, I'm running into an apache mod_rewrite configuration issue on one of our machines. Has anyone encountered / overcome anyone of these issues. URL1 ( http://www.uppereast.com ) is not being redirected to URL2 ( http://www.nyclocalliving.com ). This definitely worked in my test environment where a localhost address was rewritten to URL2 ( RewriteRule ^http://upe.localhost$ http://www.nyclocalliving.com ). I'm trying to get the all of the redirect rules working ( 2200 + ), but the 'http://www.nyclocalliving.com' site encounters a server error if I use more that 1000 or more rules. A) .htaccess file - I've tried the simplest approach which worked in a local environment 75 # Various rewrite rules. 76 <IfModule mod_rewrite.c> 77 RewriteEngine on 78 79 # BEGIN new URL Mapping rules 80 #RewriteRule ^http://www.uppereast.com/$ http://www.nyclocalliving.com ... 2307 #RewriteRule ^http://www.uppereast.com/zipcodechange.html$ http://www.nyclocalliving.com/zip-code-change fig. 1 B) /var/log/httpd/error_log file - there are these seg. fault errors when I enable the first rule ( line 80 ). no error logs otherwise. 1893 [Fri Sep 25 17:53:46 2009] [notice] Digest: generating secret for digest authentication ... 1894 [Fri Sep 25 17:53:46 2009] [notice] Digest: done 1895 [Fri Sep 25 17:53:46 2009] [notice] Apache/2.2.3 (CentOS) configured -- resuming normal operations 1896 [Fri Sep 25 17:53:47 2009] [notice] child pid 29774 exit signal Segmentation fault (11) 1897 [Fri Sep 25 17:53:47 2009] [notice] child pid 29775 exit signal Segmentation fault (11) 1898 [Fri Sep 25 17:53:47 2009] [notice] child pid 29776 exit signal Segmentation fault (11) 1899 [Fri Sep 25 17:53:47 2009] [notice] child pid 29777 exit signal Segmentation fault (11) 1900 [Fri Sep 25 17:53:47 2009] [notice] child pid 29778 exit signal Segmentation fault (11) 1901 [Fri Sep 25 17:53:47 2009] [notice] child pid 29779 exit signal Segmentation fault (11) fig. 2 C) Some more debug information from the shell; the mod_rewrite is turned on and this is the machine architecture 1 # apachectl -t -D DUMP_MODULES | more 2 Loaded Modules: 3 core_module (static) 4 ... 5 rewrite_module (shared) 1 # uname -a 2 Linux RegionalWeb 2.6.24-23-xen #1 SMP Mon Jan 26 03:09:12 UTC 2009 x86_64 x86_64 x86_64 GNU/Linux fig. 3 I looked into some previous posts (http://serverfault.com/questions/18744/htaccess-not-working-modrewrite), but didn't find a solution for this. I'm sure there's a small switch somewhere that I'm missing. Thanks in advance Tim

    Read the article

  • Windows: Impact of clean install Service Pack 2 to applications & data?

    - by Thomas Matthews
    My Windows Vista Home Premium system is corrupt and won't install Service Pack 2. I have followed all the advice from Microsoft and still no luck. I would like to perform a clean install of Vista, then SP1, and then SP2. My concern is the effect of the clean install on the registry, my apps and all my data. My plan: 1. Download Vista Service Pack 1 (SP1) ISO and write to DVD. 2. Download Vista Service Pack 2 (SP2) ISO and write to DVD. 3. Backup all data, applications and registry to external hard drive (file copy not disk image) 4. ?? Format hard drive?? (is this necessary?) 5. Install Vista from DVDs / CDs. 6. Install SP1 from DVD 7. Install SP2 from DVD 8. Restore registry, applications and data from external hard drive. My questions: 1. Is formatting the hard drive a necessary step? 2. Will restoring the registry from the backup corrupt the system? 3. Should I use Windows Backup or ZIP/RAR? 4. Any gotcha's that I should look out for? Background: I am using Windows Vista Home Premium with SP1. The sfc program does not finish due to a resources problem (even when run as administrator). I have 5 users on it. After a while, the screen goes black and shows an error message window about an error with login.scr. Standard accounts display a black screen and can't run any applications. Administrative accounts have no problems (even standard accounts when converted to Administrative have no problem). The CBS log contains a lot of 0x8000ffff and E_UNEXPECTED errors (which Microsoft defines as catastrophic failure). This is the reasoning behind performing a clean install up to service pack 2.

    Read the article

  • 403 Forbidden Error when trying to view localhost on Apache

    - by misbehavens
    I think my Apache must be all screwed up. I don't know if it ever worked. I just upgraded to Snow Leopard, and the first step on this tutorial is to start apache and check that it's working by opening http://localhost. It starts fine but when I go to localhost I get a 403 forbidden error. I don't know where to start figuring out how to fix it, so I wonder if a fresh install of Apache would do the trick. What do you think? Update: I found some error logs in /private/var/log/apache2/. Found this in one of the logs. Not sure what it means: [Tue Nov 10 17:53:08 2009] [notice] caught SIGTERM, shutting down [Tue Nov 10 21:49:17 2009] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] Warning: DocumentRoot [/usr/docs/dummy-host.example.com] does not exist Warning: DocumentRoot [/usr/docs/dummy-host2.example.com] does not exist httpd: Could not reliably determine the server's fully qualified domain name, using Andrews-Mac-Pro.local for ServerName mod_bonjour: Skipping user 'andrew' - cannot read index file '/Users/andrew/Sites/index.html'. [Tue Nov 10 21:49:19 2009] [notice] Digest: generating secret for digest authentication ... [Tue Nov 10 21:49:19 2009] [notice] Digest: done [Tue Nov 10 21:49:19 2009] [notice] Apache/2.2.11 (Unix) mod_ssl/2.2.11 OpenSSL/0.9.8k DAV/2 PHP/5.3.0 configured -- resuming normal operations Update: I also found something in the dummy-host.example.com-error_log file. I didn't set these dummy-host things by the way. Is this the default configuration? [Tue Nov 10 21:59:57 2009] [error] [client ::1] client denied by server configuration: /usr/docs Update: Woohoo! I found the file that had the virtual host definitions. It was in /etc/apache2/extra/httpd-vhosts.conf. It had those two dummy virtual host settings in there. I added a localhost virtual host. Not sure if this is necessary, but since it wasn't working before, decided to do it anyway. After removing the old virtual hosts, adding my new localhost virtual host, and restarting apache, it seems to work. So I guess whenever I want to add a virtual host, I only need to add them to this file? Or is there a hosts file somewhere, like there is on Linux? Update: Yes, there is an /etc/hosts file that need to be changed to. Add the virtual host name to that file.

    Read the article

  • Areca 1280ml RAID6 volume set failed

    - by Richard
    Today we hit some kind of worst case scenario and are open to any kind of good ideas. Here is our problem: We are using several dedicated storage servers to host our virtual machines. Before I continue, here are the specs: Dedicated Server Machine Areca 1280ml RAID controller, Firmware 1.49 12x Samsung 1TB HDDs We configured one RAID6-set with 10 discs that contains one logical volume. We have two hot spares in the system. Today one HDD failed. This happens from time to time, so we replaced it. Upon rebuilding a second disc failed. Normally this is no fun. We stopped heavy IO-operations to ensure a stable RAID rebuild. Sadly the hot-spare disc failed while rebuilding and the whole thing stopped. Now we have the following situation: The controller says that the raid set is rebuilding The controller says that the volume failed It is a RAID 6 system and two discs failed, so the data has to be intact, but we cannot bring the volume online again to access the data. While searching we found the following leads. I don't know whether they are good or bad: Mirroring all the discs to a second set of drives. So we would have the possibility to try different things without loosing more than we already have. Trying to rebuild the array in R-Studio. But we have no real experience with the software. Pulling all drives, rebooting the system, changing into the areca controller bios, reinserting the HDDs one-by-one. Some people are saying that the brought the system online by this. Some are saying that the effect is zero. Some say, that they blew the whole thing. Using undocumented areca commands like "rescue" or "LeVel2ReScUe". Contacting a computer forensics service. But whoa... primary estimates by phone exceeded 20.000€. That's why we would kindly ask for help. Maybe we are missing the obvious? And yes of course, we have backups. But some systems lost one week of data, thats why we'd like to get the system up and running again. Any help, suggestions and questions are more than welcome.

    Read the article

  • Perl missing while installing nginx on centos

    - by Ahoura Ghotbi
    I am trying to install nginx on my server, however it keeps returning "./configure: error: perl 5.6.1 or higher is required" eventhough I have perl v5.8.8!!!! I have already downloaded perl and trying to configure it using the following command : ./configure --with-http_stub_status_module --with-http_perl_module --with-http_flv_module --add-module=nginx_mod_h264_streaming here is the output : [root@fst nginx-0.8.55]# ./configure --with-http_stub_status_module --with-http_perl_module --with-http_flv_module --add-module=nginx_mod_h264_streaming checking for OS + Linux 2.6.18-308.el5 x86_64 checking for C compiler ... found + using GNU C compiler + gcc version: 4.1.2 20080704 (Red Hat 4.1.2-52) checking for gcc -pipe switch ... found checking for gcc builtin atomic operations ... found checking for C99 variadic macros ... found checking for gcc variadic macros ... found checking for unistd.h ... found checking for inttypes.h ... found checking for limits.h ... found checking for sys/filio.h ... not found checking for sys/param.h ... found checking for sys/mount.h ... found checking for sys/statvfs.h ... found checking for crypt.h ... found checking for Linux specific features checking for epoll ... found checking for sendfile() ... found checking for sendfile64() ... found checking for sys/prctl.h ... found checking for prctl(PR_SET_DUMPABLE) ... found checking for sched_setaffinity() ... found checking for crypt_r() ... found checking for sys/vfs.h ... found checking for nobody group ... found checking for poll() ... found checking for /dev/poll ... not found checking for kqueue ... not found checking for crypt() ... not found checking for crypt() in libcrypt ... found checking for F_READAHEAD ... not found checking for posix_fadvise() ... found checking for O_DIRECT ... found checking for F_NOCACHE ... not found checking for directio() ... not found checking for statfs() ... found checking for statvfs() ... found checking for dlopen() ... not found checking for dlopen() in libdl ... found checking for sched_yield() ... found checking for SO_SETFIB ... not found configuring additional modules adding module in nginx_mod_h264_streaming + ngx_http_h264_streaming_module was configured checking for PCRE library ... found checking for system md library ... not found checking for system md5 library ... not found checking for OpenSSL md5 crypto library ... found checking for zlib library ... found checking for perl + perl version: v5.8.8 built for x86_64-linux-thread-multi ./configure: error: perl 5.6.1 or higher is required

    Read the article

  • Apache2 graceful restart stops proxying requests to passenger

    - by Rob
    Issue with apache mod proxy, it stops proxying requests after a graceful restart but not all the time. It seems to happen only on a Sunday when a graceful restart is triggered by logrotate. [Sun Sep 9 05:25:06 2012] [notice] SIGUSR1 received. Doing graceful restart [Sun Sep 9 05:25:06 2012] [notice] Apache/2.2.22 (Ubuntu) Phusion_Passenger/3.0.11 configured -- resuming normal operations [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(492) failed in child 26153 for worker proxy:reverse [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(486) failed in child 26153 for worker http://api.myservice.org/api [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(487) failed in child 26153 for worker http://api.myservice.org/editor/$1 [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(489) failed in child 26153 for worker http://api.myservice.org/build [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(490) failed in child 26153 for worker http://api.myservice.org/help [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(491) failed in child 26153 for worker http://api.myservice.org/motd.html [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(480) failed in child 26153 for worker http://api.myservice.org/api [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(481) failed in child 26153 for worker http://api.myservice.org/editor/$1 [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(483) failed in child 26153 for worker http://api.myservice.org/build [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(484) failed in child 26153 for worker http://api.myservice.org/help [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(485) failed in child 26153 for worker http://api.myservice.org/motd.html [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(479) failed in child 26153 for worker http://api.myservice.org/motd.html After these lines, the logs are flooded with 404's because the requests are not being proxied. It's worth noting that the destination is just another vhost on the same apache instance, but the vhost (http://api.myservice.org) is serving passenger (mod_rails) I was thinking that maybe there's some startup issues with the passenger workers not being ready during a graceful restart? After a full restart resolves it and everything returns to normal. //Edit Here's the vhost config, thanks :) <VirtualHost *:80> UseCanonicalName Off LogFormat "%V %h %l %u %t \"%r\" %s %b" vcommon <Directory /var/www/vhosts> RewriteEngine on AllowOverride All </Directory> RewriteEngine on RewriteCond /var/www/vhosts/%{SERVER_NAME} !-d RewriteCond /var/www/vhosts/%{SERVER_NAME} !-l RewriteRule ^ http://sitenotfound.myservice.org/ [R=302,L] VirtualDocumentRoot /var/www/vhosts/%0/current # Rewrite requests to /assets to map to the /var/file-store/<SERVER_NAME>/ RewriteMap lowercase int:tolower RewriteCond %{REQUEST_URI} ^/assets/ RewriteRule ^/assets/(.*)$ /var/file-store/${lowercase:%{SERVER_NAME}}/$1 # Map /login to /editor.html as it's far friendlier. RewriteCond %{REQUEST_URI} ^/login RewriteRule .* /editor.html [PT] # Forward some requests to the API ProxyPass /api http://api.myservice.org/api ProxyPass /site.json http://api.myservice.org/api/editor/site ProxyPassMatch ^/editor/(.*)$ http://api.myservice.org/editor/$1 ProxyPassMatch ^/api/(.*) http://api.myservice.org/api/$1 ProxyPass /build http://api.myservice.org/build ProxyPass /help http://api.myservice.org/help ProxyPass /motd.html http://api.myservice.org/motd.html <Proxy *> Order allow,deny Allow from all </Proxy> # TODO generate slightly more specific Error Documents for 401/403/500's, # but for now the 404 page is good enough ErrorDocument 401 /404.html ErrorDocument 403 /404.html ErrorDocument 404 /404.html ErrorDocument 500 /404.html </VirtualHost>

    Read the article

  • TeamSpeak 3 Disconnects

    - by ArchUser
    I've recently had a few random TS3 mass disconnects and I'm am curious to know where I may find any applications that can help me determine the cause of any types of TS3 server disconnections as we plan on having many more users in the future. I run an almost empty VPS (OpenVZ) server with an ArchLinux template on it. I have 1.5/2GB of RAM, 2GHz of CPU and plenty of hard drive space, to run for the most part, just my TS3 and a low traffic apache web server. This is what I am investigating. 2011-02-04 06:07:05.130343|INFO |VirtualServer | 1| client disconnected 'Valamoor'(id:224) reason 'reasonmsg=connection lost' 2011-02-04 06:07:05.131338|INFO |VirtualServer | 1| client disconnected 'Kevrow'(id:19? reason 'reasonmsg=connection lost' 2011-02-04 06:07:05.191849|INFO |VirtualServer | 1| client disconnected 'scuba'(id:200) reason 'reasonmsg=connection lost' 2011-02-04 06:07:05.192633|INFO |VirtualServer | 1| client disconnected '[Ash] Setna'(id:75) reason 'reasonmsg=connection lost' 2011-02-04 06:07:05.193350|INFO |VirtualServer | 1| client disconnected 'Akiris'(id:254) reason 'reasonmsg=connection lost' 2011-02-04 06:07:05.194047|INFO |VirtualServer | 1| client disconnected 'Marcus'(id:25? reason 'reasonmsg=connection lost' 2011-02-04 06:07:05.194726|INFO |VirtualServer | 1| client disconnected 'Guthry'(id:275) reason 'reasonmsg=connection lost' 2011-02-04 07:18:50.327071|INFO |VirtualServer | 1| client disconnected 'Valamoor'(id:224) reason 'reasonmsg=connection lost' 2011-02-04 07:18:51.339018|INFO |VirtualServer | 1| client disconnected 'Marcus'(id:25? reason 'reasonmsg=connection lost' 2011-02-04 07:18:51.339870|INFO |VirtualServer | 1| client disconnected '[Ash] Setna'(id:75) reason 'reasonmsg=connection lost' 2011-02-04 07:18:51.340515|INFO |VirtualServer | 1| client disconnected 'Guthry'(id:275) reason 'reasonmsg=connection lost' 2011-02-05 04:55:20.797353|INFO |VirtualServer | 1| client disconnected 'JohnyRingo'(id:240) reason 'reasonmsg=connection lost' 2011-02-05 04:55:20.798517|INFO |VirtualServer | 1| client disconnected 'Maloo roots'(id:196) reason 'reasonmsg=connection lost' 2011-02-05 04:55:20.799314|INFO |VirtualServer | 1| client disconnected 'Cpt dravyn'(id:234) reason 'reasonmsg=connection lost' 2011-02-05 04:55:20.839254|INFO |VirtualServer | 1| client disconnected 'scuba'(id:200) reason 'reasonmsg=connection lost' etc... I need to determine if it is my hosting provider or my server, and what tools I can use to determine the issues. My VPS host has told me this... "I checked out the node that your VPS runs on and there is no abnormal system load, or I/O wait from the drive. I also checked the bandwidth history from the server and there have been no spikes or outages."

    Read the article

  • What are the pros and cons of AWS Elastic Beanstalk compared with other deployment strategies?

    - by James van Dyke
    I'm pretty new to the whole Netflix OSS stack and deployments in general. As a background for my current level of knowledge ops-wise, my main role is as a front-end application engineer. However, I enjoy the operations side of things, so I'm attempting to setup a new deployment strategy and the tooling for a new project. Our Goals Super easy deploys (we want to push a button to update production) Automated deploys to test environments (using Jenkins) Ease of maintenance (we have an app to write, don't want to spend our time fiddling with production issues) Ability to handle a service oriented architecture (many small apps, various languages and data stores) Enough flexibility to ensure we won't have to change strategies any time soon (we're already trying to get away from RightScale) We're OK with a little more initial setup time if doing so will save us some headaches in the future. So, along these lines, I've been listening to podcasts, watching Ops talks, and reading tons of blog posts and based on our goals and what I've taken to be some forming best practices, we've started forming a plan using Asgard, rolling our package into a jar and rolling that into an AMI. We had this all planned out and like the advantages the process versus using a Chef server and converging instances on the fly (we felt this was error prone given our limited timeline and lack of understanding around a Chef server workflow). However, a coworker did a little looking around on his own and felt like Elastic Beanstalk met our needs. I've looked into it and spun up a test environment with a WAR file and an attached RDS database. Things seem to work and I believe that we can automate deploys to a testing environment using Jenkins via the AWS API. Seems simple enough... perhaps too simple. What I'm wondering is, what's the catch? If Elastic Beanstalk is so simple and effective, why isn't it talked about more? I'm having a hard time finding enough objective opinions and facts about the two different deployment strategies, so I thought I'd ask around. Do you use Elastic Beanstalk? If so, why and what factors lead to that decision? What do you like and dislike? If you don't use Elastic Beanstalk but considered it, what do you use and why didn't you use Elastic Beanstalk? What are the advantages and disadvantages to a Elastic Beanstalk based deployment strategy for an SOA? That is, will Elastic Beanstalk work well with many small applications that rely on each other to work?

    Read the article

  • How to move Mailboxes over from old Exchange 2007 to new EBS 2008 network?

    - by Qwerty
    This q is similar to: http://serverfault.com/questions/39070/how-to-move-exchange-2003-mailbox-or-store-from-2003-to-2007-on-separate-networks Basically I am trying to move our exchange mailboxes over to a test domain that is hosting EBS2008 with Exchange 2007. We plan to move as soon as we can when we have our exchange data over. I have tried moving a db with mailboxes over but cannot get it to mount in the new Exchange in any way possible, including mounting it onto a recovery store. From my understanding the ONLY prerequisite for moving Exchange DBs across is that it must have the same Organizational name (unlike previous versions of Exchange). If anyone has any insight as to why I cannot mount and simply reattach the mailboxes, please give me an idea as to what could be wrong. It should be as simple as this. Note that the DBs I have are in a clean state. I cannot use ExMerge because I am not running any mailboxes on 2003. I have also tried using a 32bit Vista machine with the Export-Mailbox cmdlet to extract mailboxes but anything I do to it results in Permission errors. I have tried to troubleshoot these with no success. I am running in full admin with proper exchange roles and yet it still gives me access denied errors: Export-Mailbox : MapiExceptionNetworkError: Unable to make admin interface conn ection to server. (hr=0x80040115, ec=-2147221227) Also some errors show in the management console: get-MailboxDatabase Completed Warning: ERROR: Could not connect to the Microsoft Exchange Information Store service on server TATOOINE.baytech.local. One of the following problems may be occurring: 1- The Microsoft Exchange Information Store service is not running. 2- There is no network connectivity to server TATOOINE.baytech.local. 3- You do not have sufficient permissions to perform this command. The following permissions are required to perform this command: Exchange View-Only Administrator and local administrators group for the target server. 4- Credentials have been cached for an unpriviledged user. Try removing the entry for this server from Stored User Names and Passwords. Why I have to use a 32bit machine to export a simple .pst file is beyond me... So yeah I am now out of ideas and any help would be great! Thanks in advance.

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >