Search Results

Search found 18637 results on 746 pages for 'network printers'.

Page 344/746 | < Previous Page | 340 341 342 343 344 345 346 347 348 349 350 351  | Next Page >

• Windows 7 -Can't get access to shared folder from one computer to another.

  - by Carbonara

  I have 2 windows 7 computers and i'm trying to share a folder (that I want password protection on) outside of the homegroup. Both computers are part of the same workgroup and I have the same user account/password combination on both computers plus I have password protected sharing turned on in the network and sharing centre along with file and printer sharing turned on. On computer 1 I have right clicked and selected that I want the folder shared. When I navigate via the network on computer 2 to computer 1 the shared folder shows up on computer 2 but double clicking on it to open it gives me an alert saying I don't have permission to access it, no option to type in the user name and password (according to the help files I shouldn't even need to type the password in if both computers have the same username/password anyway but would need it if I'm logged in as a different user). It's just a blanket denial of access.

  Read the article

• IIS7.5 website (mostly) inaccessible from the outside world

  - by Force Flow

  On the network firewall, I opened up port 80 and forwarded it to the Windows Server 2008 R2 running IIS 7.5. Port 80 is open in the Windows firewall. On the LAN, the website is accessible without any trouble. When accessed from the outside, I can access it only 3 times every few hours before access to it cuts out from the outside. There aren't any access limits in IIS or the network's firewall as far as I can tell. IIS is running PHP 5.3. The default website has been deleted. The bindings for the website's domain are set for mydomain.com *:80 and mydomain.com 192.168.0.3:80

  Read the article

• OpenVPN and brouting issue

  - by JavierMartinz

  I have a Guest XEN Machine in which I want to connect by OpenVPN to other network. But I have this problem: when I want to connect to that OpenVPN I get a lot of TLS handshake errors because I think that the packages did not come rightly. When, at the end, the guest machine achieve to connect (after several tries) I can't ping the other machines of the OpenVPN network. Except sometimes, where if I ping 20 times MAYBE i get ping-answer in 1-2 times. I think that this problem is related about how the HOST Xen machine 'filters' the packages to the bridge. I mean, I think that all the outgoing guest machines packages are good but the incoming traffic to the guests is not recognized well. How could I detect/solve the problem? Im using Debian Linux in both machines

  Read the article

• Creat a new Domain Server

  - by priyadarshi

  If I will make new Domain Server for 100 users,what will be hardware ,software and network requirments ?

  Read the article

• Macbook not connecting to WIFI

  - by Model Reject

  I have been having this problem all week. My Macbook aluminium can't see my wifi network. I have changed the channel to one that isn't being used by neighbours and my iphone picks it up straight away. In other words, the router is fine. It's just the macbook can't see it. This is driving me nuts if anyone can help... My airport card details... Card Type: AirPort Extreme (0x14E4, 0x8D) Firmware Version: Broadcom BCM43xx 1.0 (5.10.131.36.1) Locale: ETSI Supported PHY Modes: 802.11 a/b/g/n Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Wake On Wireless: Supported The funny thing is that is was intermitent on Saturday. I had to keep restarting router and it worked for about 5 minutes, now it doesn't connect or see it at all. Tried using kisMAC and it can't see network either. Thanks, C

  Read the article

• Central Storage for windows user accounts homedirs .. hardware/software needed?

  - by mtkoan

  We have ~120+ users in our network, and are endeavoring to centralize logon authentication and home directory storage server-side. Most of the users are Windows 2000/XP machines, and a few running Mac OS X. Ideally the solution will be open-source-- can this all be managed from a Linux server running LDAP and Samba? Or would a hacked-NAS Box with a FreeNAS or similar suffice? Or is Micro$oft's Active Directory really the preference here. Is it viable to store PST files on this server for users to read from and write to? They are very large ~1.5gb. We have no mail server (or money) capable of Exchange or IMAP, only an old POP3. What kind of hardware horsepower and network architecture should we have for this kind of thing?

  Read the article

• Port forwarding using IP Tables

  - by Darider

  I have a server with a LAN facing address of 192.168.5.100 (eth0) and another LAN facing address of 192.168.6.6 (eth1). On this server I have a Virtualbox instance of fedora running an apache webserver (on port 8080) with a bridged interface to eth1 on the host server with address of 192.168.6.7 Users on the 192.168.6.x network can access the Webserver on the Vbox instance (192.168.6.7) with no problems. My question is what kind of iptables entries or commands should be made/executed so as to allow for users on the 192.168.5.x network to access the webserver on the vbox instance. (I'm hoping their url can be something like: http://192.168.5.100:8080)

  Read the article

• Separate 2 networks with 1 Windows Server

  - by SamuGG

  The situation is: I have 1 router 192.168.1.1, 1 switch, 1 windows server and a basic LAN of devices accessing it. I need to split into 2 separate LANs with full Internet access each, but isolated from each other. Given that, the server is a Windows Server 2008 R2 with 2 NICs: NIC1: 192.168.1.2 NIC2: 192.168.2.2 The router has no dhcp configuration. Please, can anyone explain gracefully, step by step, what do I need to do? What would be the 2 NICs full configuration? What services do I need to install? I don't want devices on either network to see devices on the other network, they must be completely separate. I guess I'm missing the routing procedure step, but I have no idea how is that done. For example: tell the server that devices with gateway 192.168.2.2 must send traffic for internet to 192.168.1.1 router. Thanks in advance.

  Read the article

• local wordpress installation not accessible from the outside world

  - by hello

  I have a working installation of wordpress located in /var/www/html/wordpress It is accessible in my local network at [local-machine-ip]/wordpress/ There is also a test page located in /var/www/html/test.html It is also accessible in my local network at [local-machine-ip] I would like the wordpress website to be accessible from the outside world. I know that my ISP blocks incoming requests on port 80, so I set my router to redirect requests from port 8080 to 80. This feature appears to be working correctly since I can access the test.html page using my public ip address as follows: [public-ip]:8080 However, I cannot access [public-ip]:8080/wordpress Here is my Apache config : <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/html ServerName [my.domain.com] <Directory /var/www/html/> Options FollowSymLinks Indexes MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> Thanks!

  Read the article

• I need to make Windows 7 STOP disabling the wifi adapter when the wired LAN is connected

  - by Escobar Ceaser

  This is a Dell Latitude E6430. There is a setting in the bios to control this behavior and I have DISABLED it but it still happens. I am also running the latest bios. When I plug in a network cable the wifi adapter becomes disabled. I need it to stay enabled. What else could be making this happen? EDIT: The reason I need to do this is because with NETSH WLAN commands you can create a wifi hotspot by sharing the internet connection on the wired adapter and broadcasting a ssid on the virtual wifi nic. I do this all the time but it's not working on this laptop. I'm wondering if it's a network security thing where I am. I'm going to try from my hotel tonight and report back.

  Read the article

• Can i change the subnet on the vpn side of a server without having to change its whole lan (to avoid collission)

  - by Gusty

  Ohai, ive got a xp server with a client connecting via VPN. Problem (as we all know) is that sometimes the subnets clash. Instead of changing the whole server network every time this happens, cant i just have the server appear to have a different subnet to vpn clients? I have no interest in accessing other computers than the server on its LAN. I tried just turning off automatic dhcp in the servers vpn settings and changed it to 172.31.255.x. The client gets the address assigned alright and it can ping 172.31.255.1 but i cannot ping the server name (because the dns on the clients vpn connection points at 192.168.0.1?) wisdom? PS everything worked until the client hit a network with the same subnet as the server lan. thanks

  Read the article

• Setting primary IP for VPS (out of 2 available)

  - by Flyer

  I've got a little problem. My VPS (Debian box) has 1 primary IP address, but now my hosting provider decided to assign me another one due to problems with first one. Let's say new IP is 91.222.152.20 and old one 91.221.190.170. How should I make 91.222.152.20 primary one, so that everything works on this address instead of 91.221.190.170 (like ftp, mysql etc) I tried editing /etc/newtwork/interfaces setting iface eth1 inet static address 91.222.152.20 netmask 255.255.252.0 network 91.222.152.0 broadcast 91.222.155.255 gateway 91.222.152.1 I know that network is 91.222.152.0/22 so I assume that above configuration should be right. Saved, rebooted and that ended pretty bad. Couldn't even ping box on old or new IP. Had to revert to working one. So question is. What am I doing wrong and how to do it right?

  Read the article

• vmware workstation shared vm remote connection

  - by user1875332

  I'm running vmware workstation 9 on a dedicated server so I can connect to my virtual machines from a remote connection using workstation 9 as well. I've gone ahead and shared the VM, but I've searched all over and can't seem to figure out how to connect to the shared vm. What do you put as the Host/IP, user, pass? Is it of the shared vm, or the host vm? Is there some other settings you need to do as well? I'm completely stumped. Most of the videos I see seem to be people using shared vm's on the same network, not a remote network.

  Read the article

• Excluding four IP's from a /32 static route

  - by Justin

  I have a Cisco ASA routing a /32 of public addresses (non RFC-1812) through a private link. When the device sees the destination address it selects the private route instead of going out over the public network. This works great but I am now trying to exclude 4 IP's from the private route. Traffic to these addresses should go over the public internet instead of being routed over the private network. Can I just add anothe route for these four IP's or do I have to modify the existing route for the /32?

  Read the article

• make a folder/partition on one computer appear as a mass storage device to another?

  - by user137560

  Is there anyway to make a folder or a partition on a computer (Linux or Windows) act like a mass storage device to other computers or devices when connected with a Male-Male USB cable? For example, I have a Windows 7 computer with 2 partitions, C and D. I would then connect that computer to another computer or a Smart TV using a Male-Male USB cable, and the other computer or device recognizes a folder/partition on current computer as a mass storage device. Is this possible? If not, is there any USB switch that can connect an external hard drive or flash drive to both a computer and TV without the need to manually switch them? (I know about some USB switches, but they only support automatic switching with some certain types of printers, not with mass storage)

  Read the article

• Resolving Domainnames differently for different services

  - by mlaug

  Some time ago we had an issue with our network infrastructure and php with curl. Our Network infrastructure is fairly simple. LoadBalancer/Firewall = 5 servers The Domainname of our website is set to the ip of the Loadbalancer, of course. But calling curl from one of the servers did result in a timeout. It appears that a server could not call for its own domain it is serving. So we had to set the domains via /etc/hosts to the sever itself. But now We have implemented a Varnish in front of the Loadbalancer, which we want to automatically purge, once a change on a page happens. So now we need to call the domain www.example.com/url_to_purge. Sadly this call what be resolved to the server itself instead of the varnish, because of the /etc/hosts entries. So now I am wondering, if you could resolve domain names differently for different services :)

  Read the article

• Cannot connect to Internet via Wifi

  - by lvogel

  I have a laptop that's currently configured as a dual-boot. The problem: I cannot connect to the Internet in the home wireless network through Ubuntu in the apartment where I currently live. The strange part: I can connect to it just fine through Windows (as right now), and I can use the Internet through Ubuntu on this computer with all the other wireless networks I have tried. The problem is only with this particular combination. The only possible explanations I can think of are either that this network is WPS, or that it's a driver problem--Vodafone router. The router 'sees' the computer--and it says it's connected; however, I keep getting prompted for a password, and I enter the key that works with Windows, but in Ubuntu it just keeps asking for it repeatedly, and I can't access the Internet. I don't have an ethernet cable at the moment, but if someone would be so kind as to ask me questions I will gladly answer, and if you have suggestions, I will do them--the only thing is, I am subletting this apartment from someone who is away on vacation, so I don't want to screw with the router settings unless I know what I'm doing! - I do not have Wicd - Yes, I have the router's information (key works in Windows) - Feedback of lshw says that the wireless card is Ultimate N Wifi Link 5300, vendor: Intel Corporation, physical id: 0 ,etc. The first two commands I was told to try work OK, but when I typed sudo ifconfig wlan0 essid ..... I got back 'essid: Unknown host' Would my question be better on the Ubuntu forums than here on AU?

  Read the article

• linux static ip problem

  - by out_sider

  I have a serve running centOS and I'd like to have the following setup: The server needs to have a static ip and be accessible by name. What I want is independently of the network being able to connect the server to the network and access it by name on Firefox as it will be running a web page. I tried setting the ip manually but while the inet addr is set as I want it the Bcast isn't. And I only can ping the server on the Bcast ip and because it is 192.168.2.255 ssh says it's not valid.

  Read the article

• Pushing image changes to multiple servers

  - by gms8994

  I need the ability to push images out to multiple servers whenever they're updated. I've looked at Network Filesystems, but they're all but worthless due to their speed. Images can be uploaded to any one of 3 servers, and would then need to be copied to the other 2. Any suggestions? I'm open to try just about anything. EDIT: Graphics data (jpg, gif, png, etc). Linux only. We're currently using rsync. But having it work back and forth is getting cumbersome. It's all local network.

  Read the article

• Retrieve Ip Adress

  - by kareemsaad

  I want any way to know who take my IP from my network place in my company

  Read the article

• Opinion choosing Switch

  - by mastercode

  ) i have to reestruct a LAN network, with (currently) +/- 60hosts connected ... i have File Servers hosted, VoIP Phones,wireless AP's,printers, scanners, plotters,biometric dispositive,and 2 QNAP TS412 as FileServer and BackupServer, a Mac Mini as main Server of almost all services that need server ... and, a HP V1910-24 (L2+) and another two switches,but, only L2. which switch in your opinion, could fit better this reestruct, to ensure a VLAN division- and have to support Inter VLAN routing also - provide better performance, and also, allow a Future expansion. the budget, is low xD hehe!!

  Read the article

• Server 2008 Hyper-V User Accounts to access each other

  - by asn1981

  Hi, I have a windows server 2008 r2 with 3 hyper-v vm's IIS server Sql server 3 - Mail server I'm new to networking/server configuration. I have created a Virtual Network and can see each of the 3 VMs as well as the host on the network. I can connect from each VM to the host using the admin account. However, what would be the best (secure) way to create connections/accounts between the VMs, presumabely this shouldn't be done with an admin account but one with lesser priveledges. For example, to be able to access the SQL Server VM from the IIS server VM?

  Read the article

• Setting nagios location in map

  - by Mech Software

  I have Nagios installed and I'm working on getting the network map correct. The problem I have is that "Nagios" appears to be in the "internet" when it should be located on the MechNAS server. What I want is Nagios Process to show up inside the local network. So it should show up at the same layer as MechNAS and development. Where exactly is that configured? I didnt see any place to set that up and it looks now like it's out there on it's own. Documentation and Googling didnt seem to turn up anything either.

  Read the article

• SSH logins failing before success

  - by Vincent

  I am running Ubuntu 12.04 Server, updated, to run a webserver on Tomcat 7. I have about 1000 clients that are very very often using an RSYNC program to sync some file with this server. Those RSync are using SSH with a certain user to open connections on the server. The result is that my server is, as normal, full of connections by the same user. About 5 connections per 1 second every day any time. Then, when I try to open a regular SSH connection with my Putty client, the connection fails before login saying "Server unexpectedly closed network connection", about 6 times for 10 attemps, anbd for 4 attemps out of 10, it works normally and I am able to login as any user. Is there a overload of connections here? The server statistics are very calm saying less then 40% of network usage and less of 2% CPU. How can I improve this? Thank you for any help. V.

  Read the article

• Remote Destkop into Server 2008R2 with Firewall On

  - by Eternal21

  I've got a fresh install of Remove Server 2008 R2, 64 bit. The problem is I can't Remote Destkop into it. I clicked 'Enable Remote Desktop' inside 'Initial Configuration Tasks', and set it to: Allow connections only from computers running Remote Destkop with Network Level Authentication (more secure). The thing is, this used to work just fine, and then it stopped. The only way I can get it to work now is if I turn of Windows Firewall completely off (Public network location settings). Obviously I don't want to run the server with firewall off, so what specific settings in Firewall do I need to disable, or am I doing something wrong?

  Read the article

< Previous Page | 340 341 342 343 344 345 346 347 348 349 350 351  | Next Page >