Search Results

Search found 9280 results on 372 pages for 'wireless card'.

Page 344/372 | < Previous Page | 340 341 342 343 344 345 346 347 348 349 350 351  | Next Page >

• Website hosted on my virtualbox web server not displaying images or applying css when viewed through phone

  - by WebweaverD

  I would really appreciate it if someone could help me. Please let me know if you need more info in the comments. My Set Up I have a windows 7 pc. On it I run a virtual box VM with a ubuntu 12 guest os and LAMP setup. I share files between the two machines using samba from linux to windows and using windows file sharing (Workgroup) the other way round. The vm is set up with a bridged network adapter and can happily serve web pages to my host machine. I use DHCP reservations on my home wireless router/modem to reserve an ip for the vm and give it a sitename.dev in my windows host file so I can access it at sitename.dev through the browser. The Problem So far so good but I have a dev project which needs a lot of mobile template development, now obviously I can use a browser plugin to simulate a mobile device but I would like to be able to see the real thing easily on my phone during development. So ideally I would like a similar setup on my iphone to my windows setup Now I'm not great on networking and dont have much experience with web server set up. So when I typed the ip of my virtual box into my iphone i wasnt expecting to see anything. I was pleasantly surprised when my site loaded up. The javascript even seems to be running but the images and css are not happening. My Question 1) What is happening here, is it something to do with the bridged set up on the vm network? 2)How do I make the sites load properly through my phone Notes I've also tried another phone. The same sites viewed on live servers work fine.

  Read the article

• iptables rule on INPUT between 2 ethernet cards on the same host

  - by user1495181

  I have 2 eth cards on the same host. Both connected directly with LAN cable. I set eth0 with ip - 192.168.1.2 I set eth1 with ip - 192.168.1.1 I set this rule: iptables -A INPUT -p tcp -j NFQUEUE --queue-num 0 There are no other rules. (I ran iptables -X,-F) I send TCP syn packet ( with c++ program by using raw socket) from 192.168.1.2 to 192.168.1.1 In wireshark i see that the packet received on eth0, but the iptables rule (above) dosnt apply for this packet. when i sent the packet to remote host and apply this rule on the remote host than it work correct. So, i guess that this is due to the fact that both eth cards exists the same host. . I need to create iptables INPUT rule for local eth card (dest and src on the same machine ). I need it for simplify test. Did i guess the problem correct? is there a way to bypass this? Ps - connected them via switch didn't help. the rule wasn't applied. Run on Ubuntu. TCDUMP show the packet: 10:48:42.365002 IP 192.168.1.2.38550 > 192.168.1.1.34298: Flags [S], seq 0, win 5840, length 0 but logging of iptables like this, has nothing: iptables -A INPUT -p tcp -j LOG --log-prefix '*****************' iptables -A OUTPUT -p tcp -j LOG --log-prefix '#################'

  Read the article

• Limited connections to Ubuntu 12.04 server

  - by Luis M. Valenzuela

  I'm having a weird problem with my server. The server is inside my network, connected to a 3com switch which is connected to the router that handles the internet connection. The main purpose of the server is to host a php application. What's happening is that user 1 to 15 in the private network have no problems connecting to the server, when user 16 tries to connect a time out comes out and is unable to connect to the server. It's not just to the php application, but to any service from the server. When the 15 users are using the application, the server doesn't even answer to ping. I haven't set any special limit in Apache's ini file or MySql and the firewall is being turned off because the server is only to give service to the internal network. Is there a parameter in any of the network's card conf. files that might me causing this ? Or should I suspect from the router's or switches configuration ? UPDATE. Tomorrow, I'm gonna do some test on the server modifying two kernel params in : /etc/sysctl.conf The settings are: net.core.somaxconn which has the limit on simultaneous network connections to the server and kernel.shmmax which controls the amount of memory the system can use for managing connections.

  Read the article

• New router, slower internet connection?

  - by qwerty

  So, we just bought a new router a few hours ago, and it does work. However, for some reason the speed is just ridiculously slow (compared to before, at least)! If i run a test on speedtest.net i get the following results: http://i.imgur.com/68JyH.png which are pretty good. But for some reason it's like the connection just "hangs" for a second when i navigate to a site through the browser (have tried different browsers). It's not on all sites, it kind of happens randomly. I think the browser cache might be speeding some sites up, because if i visit a site that i HAVEN'T visited before (since i cleared my cache), it takes like two seconds (if not more) to open the site. If i have visited it, it opens directly (it barely loads). Not sure what to do, really. Any suggestions on what might speed it up? Any settings i can play with in the router settings? The router is of the brand Belkin. I'm not sure about the model though, it says "Belkin, Play Max Wireless Router" on the box? Thanks in advance! EDIT: Alright, it takes a lot more than two seconds. At least 3-4 depending on the site. Any suggestions?

  Read the article

• Computer will not boot - disk read error - cannot boot from HD or DVD

  - by Grant Palin

  This is a 3 year-old system: HP a1640n. There have been no issues with it in the past. I added a video card 2 years ago, and more memory 1 year ago, both without issues. There haven't been any recent hardware changes. I did install Win7 in Oct., but there were no issues with that either. I used the computer fine two nights ago, and turned it off. Yesterday, I tried to turn it on, and got the error: "A Disk Read Error Occurred. Press CTRL ALT DEL to restart" So I restart, see the initial start screen (HP) and enter the BIOS. The hard drive and dvd drive appear to be listed, but the names are gibberish text. I tried putting a Windows disk in the dvd drive, and continued with the boot, but the disk did not get recognized. Even though the BIOS was set to check for optical media before the hard drive. Back to the error screen. If the computer would boot from a cd or dvd, I would just figure the hard drive needed replacing. But both being problematic worries me. Is this a matter of replacing both the hard drive and dvd drive, or might it be an indication of a bigger problem? Thanks for any advice.

  Read the article

• Local Network - Windows 7 and Vista can't see each other

  - by ca8msm

  I've got a strange issue at home that has been bugging me for weeks, but I really need to get it sorted now so I'll detail as much as I can and hopefully someone can spot what might might be wrong. I have a wireless router connected to the internet and 3 devices connected to it. They are: Name OS Network IPv4 PC1 Windows 7 WORKGROUP 192.168.2.2 LAPTOP1 Vista WORKGROUP 192.168.2.3 PS3 192.168.2.4 and they all get their IP addresses dynamically. Both PC1 and LAPTOP1 can ping PS3 and get a response. PC1 and LAPTOP1 are unable to ping each other by ip address unless I ping by their name (which bizarrely shows that it is pinging via the IPv6 address). Also, to confirm this both PC1 and LAPTOP1 can ping each other via the long IPv6 address that they both have so they can obviously see each other just not via IPv4. I've disabled the firewalls on both machines as well to rule that out. I don't really know what IPv6 is used for and I've tried disabling it on both machines but all that happens then is that neither machine can see each other at all then. Does anyone have any idea of what may be stopping them seeing each other, any ways I can look at fixing this, or any network tools that may help identify where it is failing? Thanks, Mark

  Read the article

• IP Masquerade and forwarding

  - by poelinca

  Hi all , i got a dedicated server running ubuntu server 10.10 with 3 ip adresses on the same eth card ( example: eth0 192.168.0.1 , eth0:0 188.78.45.0 , eth0:1 ... ) with a 3 virtual machines running ( virtualization technologi used is lxc but i don't think this matters too much ) . Now i need to redirect all ports opened ( using ufw to close/open ports ) from the ip 188.78.54.0 ( eth0:0 ) to a virtual machine ip ( let's say for example 192.168.2.3 ) , all requests made by a virtual machine should be redirected back to the virtual machine that made the request ( in this example 192.168.2.3 ) . Lets say the second vm has the ip 192.168.2.4 now i need to redirect all opened ports to from eth0:1 to this ip and viceversa . And so on and so on , what are the iptables/ufw rules to get this done ? and where to save them ( witch config file ) so they stay the same after reboot . In a few words redirect all requests comming from/to eth0:0 to a certan ip , all requests comming from/to eth0:1 to another ip ... Remember i'm saying all ports opened becouse they might be dynamicly changed . p.s. please excuse my bad english

  Read the article

• Uninstalled server 2008 now router won't handle DHCP

  - by john

  My set up is this. server behind router, router has a server and switch connected to it with multiple computers. router used to serve DHCP and DNS, a couple of days ago installed AD, DNS and DHCP on the server, and the server gave out IP's. For various reasons we had to uninstall the domain on our server. I removed AD, DHCP and DNS from the roles and set the router back to serving DHCP and DNS. Now I can't get computers on the network. I reset my router back to factory defaults, and if I plug a computer directly into the router I can get a IP address, but all the computers behind the switch can't get an IP address and can't see the router. All my computers say unidentified network, and if I ping the router it says host is unreachable. On the other hand, my wireless devices are just fine and connect no problem. But for desktops, ipconfig /release doesn't release anything and /renew can't find a server to renew on. My router log shows several FIN scans but they are from innocuous websites (google, netgear) and it shows a couple of smurf attacks but they are all from my external IP. Any ideas? the server isn't even connected to the route right now, and all the computers are set for dynamic IP addresses.. I don't know what else to try? Any help?

  Read the article

• Updating ASUS BIOS on Windows 7 64bit

  - by joesavage

  I've recently decided that I want to try and utilize my two graphics cards so that I can have a dual monitor setup. Unfortunately Windows only seems to notice my most recent graphics card installation - and so I've been told that I should look into my BIOS and try to enable two graphics cards. I could not find this setting anywhere in my M2N68-AM Plus v0210 BIOS. After some further research I figured that I should perhaps upgrade my BIOS, so I searched and managed to download the latest version (v1804) as a ROM file. However I am having difficulty figuring out how to install it. I've tried using the Asus EZFlash feature built into my BIOS, but when trying to load up a variety of different ROMs that are for my motherboard/BIOS I get the error: Boot block in file is not valid! I'm not totally sure what I should do to fix this, so I'm looking into other methods of upgrading my BIOS - however I can't really find any solutions that seem to work. Asus Update is for 32-bit only, AFUDOS doesn't appear to work on my Windows 7 64-bit system (I think it's supposed to run in DOS or something - but that just sounds confusing since I know nothing about DOS). Could anybody help me with this?

  Read the article

• System With Two Network Adapters [closed]

  - by Synetech inc.

  Hi, My system has a NIC (Marvell Yukon) built-into the motherboard, but I also have a D-Link (RealTek) card. I figure that using the D-Link and disabling the Marvell makes the most sense, though I'm wondering if maybe the built-in one has better throughput (not that my Internet connection is so fast). Also, I'm wondering about the merits of using both at the same time. My router has four ports and I have experimented with enabling and plugging both NICs into the router. I was able to connect to the Internet, but the pattern of usage seemed irregular (which adapter was chosen for the transfer and any given point). I also considered bridging the two, but am having difficulty in finding out what exactly creating network bridge does in the context of the Windows Network Connections window. I am familiar with the concept of connecting networks, so it seems to me that birding two connections on the same segment is pointless at best (and can cause problems like loops?) Does anyone have any tips on what to do if a system has more than one NIC and any clarification on the bridge option? Thanks a lot.

  Read the article

• Grayed-Out Sleep and Hibernate Options on Windows 7 After Updating Graphics Driver

  - by Maxim Z.

  I have a Gateway M275 Tablet PC, on which I've installed Windows 7 Ultimate. The laptop is quite old, so there aren't any Win7 drivers for it, not to mention any Vista drivers. Win7 has been working for some time, but I noticed that my video output wasn't working. I went into Device Manager and found that I didn't have a driver for my video card: it just recognized it as the standard one. I searched online and found an XP driver for it, released by Gateway. Device Manager accepted this driver and prompted me to reboot. After that, I noticed that my Sleep and Hibernate options in the Shut Down menu have been grayed-out. I looked online and found that many people are attributing this to display drivers, as such an old driver would surely not be compatible with the standby procedures Windows 7 uses. To make it clear: I was able to Sleep and Hibernate before updating the drivers; now, I can't. Running powercfg /a gives me, "An internal system component has disabled this standby state," for each available standby mode. Is there some way that the driver can be modified to support hibernation? The new driver fixed my video output problem, but I guess hibernation is more important for me. If not, what steps should I take to remove the driver and just leave the standard Windows one, which previously supported hibernation and sleep on this computer? Thanks in advance.

  Read the article

• Computer slow after installing 32GB RAM

  - by John Gilmore

  I'm currently running very large network simulations for my PhD research, for which I need lots of RAM. I have a Core i7 2600K processor with a Gigabyte GA-Z68AP-D3 motherboard, running Windows 7 professional 64bit. I bought the system with 8GB (2x4GB) DDR3 1600 MHz Corsair Vengeance RAM and the system ran like a dream. I'm planning to upscale my simulations so I removed the 2x4GB RAM and installed 4x8GB DDR 1600 MHz Corsair Vengeance RAM. When I rebooted the system, boot time was much longer than usual (10 mins just to get to login screen). After logging in, the whole system was unresponsive. I tried playing some games (Bioshock 2), but it was unplayable. I've not had this problem before and I have an ATI Radeon HD 5850 graphics card, so that's not the problem. The only thing that's changed is the RAM. I've looked through the specifications of Windows, my motherboard and my CPU and they all state that 32GB of RAM is supported. Does anyone have an idea of what's going on? Any help would be greatly appreciated.

  Read the article

• Intel Motherboard Lightning Victim Dies Hard

  - by Stetson RDT

  Today, I have a more hardware-related question. I have an Intel board, and I really do not know which board it is, I built the machine for a relative, but he forgot to keep the documentation. Long story short, the computer was disconnected during a lightning storm, but a lightning strike travelled in via the ethernet cable (It was directly connected to a power brick commonly seen on those long distance ISP Wireless transmitters), and the motherboard was shocked. I am attempting to get this PC going. The problem is as follows: The computer will randomly reboot, just in the middle of anything as it pleases. May load to EFI (or whatever BIOS is nowadays), may load to bootloader, may even get to the OS. But before 5 minutes is up, the system will always die. Out of curiosity, I plugged my voltmeter in to a molex connector. On the 5V side, it gets a good, consistant +5.13V. On the 12V side, it fluctuates, as follows: Upon immediate startup, it soars to 12.11-12.13V. It will now do one of two things: it will immediately jump down to 12.04-12.05V, or hover for about a minute at 12.11-12.13, then jump down. It seems the longer the voltage stays at 12.11-12.13, the shorter the machine will stay running. Also, post codes, whenever the machine locks up, but does not die hard, seem to be between "AA" and "AC". Does this make any sense to anybody? Do you all think this motherboard is salvageable? It was an expensive bugger, and I'd prefer to not replace it.

  Read the article

• Out of memory errors but not actually out of memory...

  - by commradepolski

  So, myself and my fellow support techs have been fighting with this issue and we still dont know what the problem is. Lets start off with the system specs: Windows XP 32 bit Corporate (SP2 and SP3) Intel D975XBX2 Mobo 4gb of ram Intel Core 2 Quad Q6600 ATI Radeon HD 3600 - 512mb After a few hours of working on the machine, the end user will begin to see the following symptoms: Out of memory messages Title bars and menus dont draw in properly Problems accessing network resources Problems opening up documents such as MSWord and MSPowerpoint and text files Problems opening up explorer windows General instability We have looked at task manager while this issue was occurring, and all indicators, like PF usage, threads, handles, etc. are normal. We have been having trouble pinpointing the root cause of this issue. It is also not situated with one user, it affects 8-10. So far we have tried: Resetting CMOS (Waiting to see results) Replacing video card (didnt help) Windows updates (didnt help) Updating network drivers (didnt help) Switching user from 1gbps to 100mbps network connection (awaiting results) Swapping the affected user's hardware (waiting for results) Increasing desktop heap size (helped for a bit but then the issue became more frequent) Applying the /3 switch to XP (didnt help) Increasing and decreasing and setting PF to system managed state (didnt help) We did have a power outage at the office a couple weeks ago, and all these issues became more frequent. Prior to the power outage it may take a week or so for the users to experience the issues but since the power outage it takes 3-4 hours or less. We havent had reports of the above issues causing BSODs, although that would be easier to diagnose :). Any help is greatly appreciated.

  Read the article

• Watchguard Firebox "split" fibre optic line into 2 interfaces

  - by fRAiLtY-

  We have a requirement on our Watchguard Firebox XTM505 to be able to split our incoming external interface, in this case a fibre optic dedicated leased line, 100/100. We use the line in our office of approx 30 machines however we also re-sell to an external company who utilise it to provide wireless internet solutions to the public. The current infrastructure is as follows: Data in (Leased Line) - Juniper SRX210 managed by ISP - 1 cable out into unmanaged Netgear switch - 1 cable into our firewall and office network, 1 cable to our external providers core router managed by them. We have been informed that having the unmanaged switch in the position it is poses a security risk and that a good option would be to get our Watchguard Firewall to perform the split, by separating our office onto a trusted interface, and by "passing through" the external line to their managed router. It is alleged that the Watchguard is capable of doing this and also rate limiting the interfaces, i.e. 20mbps for the trusted interface and 80mbps for the "pass-through", however Watchguard technical support don't seem to be able to understand what we're trying to achieve. Can anyone provide any advice on whether this is possible on a Watchguard device and how or perhaps if there's a better way of achieving this, perhaps with a managed switch instead of unmanaged? Cheers

  Read the article

• Cannot ssh into server

  - by revolver

  I am trying to SSH into a linux machine running ubuntu, but the interactive shell stuck somewhere and I can't key in anything. I am on Mac OS X Lion. This only happens when I am trying to access via an external IP. Local LAN SSH is working perfectly. macbook:~ user$ ssh -v -v user@serverip // i skipped the rest of the log, but I can paste it here again if needed. Authenticated to serverip debug1: channel 0: new [client-session] debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug1: Sending env LC_CTYPE = UTF-8 debug2: channel 0: request env confirm 0 debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 My terminal shell just hang after this, and I can't key in anything. I checked var/log/auth on the server and saw that the a session is being created and I had already logged in, but I don't see any responses on my client machine. I googled around and a lot of the solution had to do with the Broadcom wireless driver, but I am not even using one, so I am pretty clueless here. To give you more information, the linux machine is also running a web server, and I have no problem accessing the web server. Thanks. Any help is appreciated.

  Read the article

• Creating a Logical network diagram

  - by user273284

  Im a student and I have been assigned the task of creating a logical network diagram for the following scenario There are 2 buildings, the first is the head office and the second is the branch. The data centre is in the head office, it contains domain controller, mail server, file server and a web server. it provides wired and wireless access to the staff. the branch building is new and it does not have a network. The two buildings must be connected using a VPN connection. The branch building will not have any servers but just network devices that will provide the connectivity, the users in the branch building will be connected to the head office over the VPN. I had created a diagram based on this scenario, but my teacher rejected it saying that it does not follow Cisco hierarchical Model and the servers were not placed correctly in the diagram. I just wanted some help in this matter so that I Can create my network diagram correctly. If anyone could upload a picture of how the logical diagram should be for this scenario will be helpful, any other resources would also be great.

  Read the article

• Replaced CPU and black screen but no beep?

  - by luke

  I'm having a bit of trouble with a GIGABYTE GA-MA78G-DS3H (rev. 2.0) motherboard. Recently when trying to clean my AMD Phenom II X 4 CPU, I dropped it and broke some pins. I have now brought a Athlon 64 X2 5400+. However, it does not seem to work. To begin with, I cleared the CMOS via the jumper located near the battery. This was because I had my AMD Phenom II overclocked and did not wish for the same voltage to go to the new CPU. I then tried booting with the monitor plugged into the chipsets VGA but no luck. No signal was sent to the monitor, and the monitor just went into standby. I then tried it off the graphics card but the same happened again. Then I tried to check whether the CPU could executed some BIOS codes by stripping the RAM out and making sure a speaker was plugged in but no beeps could be heard. I replaced the speaker and tried again but no luck. The CPU is brand-new so what is going wrong?

  Read the article

• VirtualBox with Ubuntu Server guest can't ping outside

  - by Danidan

  Here's my situation: an Ubuntu 12.04 Host running VirtualBox; two guest VMs running Ubuntu Server 12.04 home network, so my Host pc has a wireless connection to the router of my ISP. My problem is in one of the virtual machines: it has 3 NICs, one in NAT mode and the others in Host Only mode. My purpose is to use eth0 (NAT) for Internet access and eth1, eth2 (Host Only) for management of internal virtual network (eth1 uses a VBoxNet with this IP 192.168.69.254). Whenever I try to $ping 8.8.8.8 I get Destination Host Unreachable. While if I $ping 192.168.69.10, that is the IP of the other VM, it works. I can't also ping my Host nor my router My /etc/network/interfaces file is: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 192.168.69.1 netmask 255.255.255.0 auto eth2 iface ifconfig $IFACE 0.0.0.0 up up ip link set $IFACE promisc on down ip link set $IFASE promisc off down ifconfig $IFACE down $route -n returns: Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.0.2.2 0.0.0.0 UG 100 0 0 eth0 10.0.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.69.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Forgetting for now what eth2 needs to do and its setup, why I can't go outside the Host box? What can I do to help you helping me? :-)

  Read the article

• How to install (old) packages for Ubuntu 9.04?

  - by wchrisjohnson

  Based on some excellent feedback by Mark here (http://serverfault.com/questions/285598/should-i-clone-a-physical-server-to-create-a-vm-for-a-staging-server), today I was able to use the vmware converter to clone my production server for a staging server. However the nic won't come up no matter what I do. I attempted to inistall vmware tools, as I suspect that the fact that it is not installed might prevent the nic from working. (I have the nic set as a vmxnet3 card in the vm settings). The install failed because there were several dependencies missing as well as the Linux headers. Given that Ubuntu 9.04 has been EOL'd, the packages I need to install to get the vmware tools to install are no longer available. I doubt the ubuntu 9.04 install CD has the packages on it. What are my options? I'd rather not upgrade the version of Ubuntu yet, as the point of the vm right now is to maintain parity with the production server. Might I have better luck resetting the driver to use vmxnet2 instead of the vmxnet3? Thanks in advance! Chris

  Read the article

• Remote offscreen rendering

  - by redmoskito

  My research lab recently added a server that has a beefy NVIDIA graphics card, which we would like to use to do scientific computations. Since it isn't a workstation, we'll have to run our jobs remotely, over an ssh connection. Most of our applications require doing opengl rendering to an offscreen buffer, then doing image analysis on the result in CUDA. My initial investigation suggests that X11 forwarding is a bad idea, because opengl rendering will occur on the client machine (or rather the X11 server--what a confusing naming convention!) and will suffer network bottlenecks when sending our massive textures. We will never need to display the output, so it seems like X11 forwarding shouldn't be necessary, but Opengl needs the $DISPLAY to be set to something valid or our applications won't run. I'm sure render farms exist that do this, but how is it accomplished? I think this is probably a simple X11 configuration issue, but I'm too unfamiliar with it to know where to start. We're running Ubuntu server 10.04, with no gdm, gnome, etc installed. However, xserver-xorg package is installed.

  Read the article

• Is it possible to to create a live linux iso containing a win xp virtual machine?

  - by mark

  I would like to have a Linux live system that contains a Windows xp virtual machine. This would be run from a bootable USB flash drive. My attempts so far have been unsuccessful. I created a Lubuntu 12.04 virtual machine with VMware. I updated and configured it to my needs, and installed Virtualbox. I then created a Windows xp vm with Virtualbox in the Lubuntu vm. I tested everything and everything worked, including USB devices. I installed Remastersys in the Lubuntu vm, copied the xp vm folder to the /etc/skel folder then created the custom iso with remastersys. I burned the iso and tested it on a laptop. It worked flawlessly. All programs and wireless networking worked. My problem was the xp vm. Virtualbox started fine but would not run the vm. I have the following error: Result Code: NS_ERROR_FAILURE (0x80004005) Component: VirtualBox Interface: IVirtualBox {c28be65f-1a8f-43b4-81f1-eb60cb516e66}. I ran remastersys again changing the permissions on the skel folder to R W for everyone. I also logged into Lubuntu as root and ran remastersys again. Each iso I created worked fine but would not start the xp vm inside. The last attempt virtualbox gave me an access error stating it can not access the virtual disk. Is what I want to do possible? In theory I don't see why it would not work. Is it a permissions issue? Should I create the iso then add the xp vm after by editing the iso by hand? Using a vm and not real hardware as a build machine a problem? Any ideas? keep any responses in laymens terms. I am still a Linux novice.

  Read the article

• I need to build a mini computer lab with 6 PCs

  - by chiurox

  Hello everyone, This weekend I need to build a mini computer lab with 5-6 PCs. The purpose is for a small computer class that will be taking place. They're mostly going to be doing office and daily kind of stuff, so nothing high performance. However, I hope it will last at least for 2 more years. I already have some parts for 2 PCs, one is a P4 3.0 and another is Celeron 2.4GHz, both socket 478. For the other 4 PCs, I'm wondering if I should buy individual parts and put it all together or get workstations like those Dell Optiplex with P4s. To put things into perspective, I am not currently in the US. I'm in South America and prices here are ridiculously. Another really important thing is that I need to share an internet connection between a total of 8 PCs at this place. Right now I only have a crappy wireless router, should I get another one? Or go with switch hub? I'm not experienced in this matter. Thanks guys!

  Read the article

• Searching for just files

  - by M Schenkel

  I have a couple questions about searching for files on Windows 7. I find the XP method much easier than this new Windows 7 search. Note: I am only concerned about finding files matching a search term, not ALL files containing the search term. Is there a way to search just for files? When I use the search it seems to be searching "within" files and returning instances where the name of the file is used. Example: I have a whole web directory and want to find the javascript files. But if I enter "myjavascript.js" in the search, it also returns all the html files which reference the javascript file. This is both slow and difficult to actually find the reference to the file. Is there a way to search for an exact match? The search seems to implicitly use wildcards. For instance, say I have a bunch of files in a folder: file1.txt,file11.txt, file12.txt, file13.txt. If I enter "file1.txt" in the searcher it returns instances as if I were using a wild card file1*.txt I miss XP!!!!

  Read the article

• Custom PCI bracket with support, for custom PCB?

  - by newbiez

  I am considering to put a custom PCB card that I made, into my computer. It won't go on any PCI connector, it plugs in on a USB connector on the motherboard, via a ribbon cable. I need thou to plug a device to it; which means that either I leave the PCB outside the case, hanging by the ribbon (bad idea), or I could put it in a PCI slot, using a bracket. The issue is that the brackets that I have, do not have tabs, so I have no way to screw the PCB on them. I was hoping to find something that would allow me to put the PCB on it, and then just fit it in the PCI bracket opening, like this: http://www.idotpc.com/TheStore/pc/viewPrd.asp?idproduct=1203&idcategory=0 This one won't fit the bill since the holes are too close apart, compared to the one that I have already on the PCB (and can't make more holes). Do you know if there is a place where they make universal PCI bracket mounting systems for custom PCB? I just need one, so can't even order a custom one (they ask me 120 dollars for one). Thanks in advance!

  Read the article

< Previous Page | 340 341 342 343 344 345 346 347 348 349 350 351  | Next Page >