Search Results

Search found 10181 results on 408 pages for 'installation'.

Page 346/408 | < Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >

• How can I set up Redmine => Active Directory authentication?

  - by Chris R

  First, I'm not an AD admin on site, but my manager has asked me to try to get my personal Redmine installation to integrate with ActiveDirectory in order to test-drive it for a larger-scale rollout. Our AD server is at host:port ims.example.com:389 and I have a user IMS/me. Right now, I also have a user me in Redmine using local authentication. I have created an ActiveDirectory LDAP authentication method in RedMine with the following parameters: Host: ims.example.com Port: 389 Base DN: cn=Users,dc=ims,dc=example,dc=com On-The-Fly User Creation: YES Login: sAMAccountName Firstname: givenName Lastname: sN Email: mail Testing this connection works just fine. I have, however, not successfully authenticated with it. I've created a backup admin user so that I can get back in to the me account if I break things, and then I've tried changing me to use the ActiveDirectory credentials. However, once I do, nothing works to log in. I have tried all of these login name options: me IMS/me IMS\me I've used my known Domain password, but no joy. So, what setting do I have wrong, or what information do I need to acquire in order to make this work?

  Read the article

• Question about Displaying Documents and the CQWP in MOSS 2007

  - by Psycho Bob

  My organization is in the process of converting our intranet over to a SharePoint solution. Part of this intranet will be the movement and organization of all our internal documents. Currently, we have 11 pages of document links, each with its own subheadings. So far I have it set where each document has a custom field called "Page" with a check box list of all the document pages on the intranet site. On each individual page, I have setup a Content Query Web Part that displays the documents that have the corresponding Page value set (i.e. if a document Page value has been checked for "HR" it will appear on the HR page). The goal of this setup is to allow the nontechnical personal who will be responsible for the maintenance of the documents to be able to upload new documents to the documents list and note on which pages they should appear on without having to manually update the pages themselves. The problem that I am having is that I cannot seem to find a good way to sort the documents into their subheadings once they are on the appropriate page. I could create individual check boxes for each page/subheading combination, but this would create a list of approximately 50-75 items. Does anyone have any ideas as to how I could accomplish this, either via CQWP or by different means? Goals/Requirements of Installation Allow Intranet documents to be maintained by nontechnical personnel Display documents on the appropriate pages without user having to edit actual page or web part Denote document page location using user settable document attributes (if possible) Maintain current intranet organization and workflow Use only one document list without subdirectories NOTE: I am aware that this is not the most efficient or elegant way to do things, but these are the requirements I have been given for the project.

  Read the article

• Reason for perpetual dynamic DNS updates?

  - by mad_vs

  I'm using dynamic DNS (the "adult" version from RFC 2136, not à la DynDNS), and for a while now I've been seeing my laptops with MacOS 10.6.x churning out updates about every 10 seconds. And seemingly redundant updates at that, as the IP is more or less stable (consumer broadband). I don't remember seeing that frequency in the (distant...) past. The lowest time-to-live that MacOS pushes on the entries is 2 minutes, so I have no clue what's going on. ... Jan 12 13:17:18 lambda named[18683]: info: client 84.208.X.X#48715: updating zone 'dynamic.foldr.org/IN': deleting rrset at 'rCosinus._afpovertcp._tcp.dynamic.foldr.org' SRV Jan 12 13:17:18 lambda named[18683]: info: client 84.208.X.X#48715: updating zone 'dynamic.foldr.org/IN': adding an RR at 'rCosinus._afpovertcp._tcp.dynamic.foldr.org' SRV Jan 12 13:17:26 lambda named[18683]: info: client 84.208.X.X#48715: updating zone 'dynamic.foldr.org/IN': deleting rrset at 'rcosinus.dynamic.foldr.org' AAAA ... Additionally, I can't find out what triggers the updates on the laptop-side. Is this a known problem, and how would I go about debugging it? One of the machines is freshly purchased and installed. The only "major" change was installation of the Miredo client for IPv6/Teredo, but even disabling it didn't make a change (except that AAAA records are no longer published).

  Read the article

• Openldap with ppolicy

  - by nitins

  We have working installation of OpenLDAP version 2.4 which is using shadowAccount attributes. I want to enable ppolicy overlays. I have gone through the steps provided at OpenLDAP and ppolicy howto. I have made the changes to slapd.conf and imported the password policy. On restart OpenLDAP is working fine and I can see the password policy when I do a ldapsearch. The user object looks like given below. # extended LDIF # # LDAPv3 # base <dc=xxxxx,dc=in> with scope subtree # filter: uid=testuser # requesting: ALL # # testuser, People, xxxxxx.in dn: uid=testuser,ou=People,dc=xxxxx,dc=in uid: testuser cn: testuser objectClass: account objectClass: posixAccount objectClass: top objectClass: shadowAccount shadowMax: 90 shadowWarning: 7 loginShell: /bin/bash uidNumber: 569 gidNumber: 1005 homeDirectory: /data/testuser userPassword:: xxxxxxxxxxxxx shadowLastChange: 15079 The password policy is given below. # default, policies, xxxxxx.in dn: cn=default,ou=policies,dc=xxxxxx,dc=in objectClass: top objectClass: device objectClass: pwdPolicy cn: default pwdAttribute: userPassword pwdMaxAge: 7776002 pwdExpireWarning: 432000 pwdInHistory: 0 pwdCheckQuality: 1 pwdMinLength: 8 pwdMaxFailure: 5 pwdLockout: TRUE pwdLockoutDuration: 900 pwdGraceAuthNLimit: 0 pwdFailureCountInterval: 0 pwdMustChange: TRUE pwdAllowUserChange: TRUE pwdSafeModify: FALSE I do not what should be done after this. How can the shadowAccount attributes be replaced with the password policy.

  Read the article

• How do you automatically close 3rd party applications when LiberKey is shut down?

  - by NoCatharsis

  Within LiberKey, I have added my own portable applications that are not included within the LiberKey library. When you go into the Properties menu for the app in the LiberKey UI, the Advanced tab has an option for Autoexecute. This dropdown menu seems to have no visible effect, at least on my current installation. I found that I could right click within the primary GUI and select "Add software group", add all 3rd party applications, then go to the Advanced tab within THAT Properties screen and select Autoexecute - "Always on startup". This solved the problem for starting the apps when LiberKey starts. However, now I'm having the same issue when closing out LiberKey. I have created a new 3rd party app that calls the same .exe, but sends the Parameter "/close". I then went to the Advanced tab and selected Autoexecute - "Always on shutdown". Seems pretty logical right? But the apps will not close on LiberKey shutdown. I cannot handle the app close-outs in the same way with a software group, as I did with the startup issue because the Autoexecute drop-down does not have an "Always on shutdown" option. Unfortunately, many of the Q&A forums on liberkey.com are in French and I took Spanish in high school. Otherwise I've not been able to find a workable answer. Any suggestions?

  Read the article

• CentOS security for lazy admins

  - by Robby75

  I'm running CentOS 5.5 (basic LAMP with Parallels Power Panel and Plesk) and have thus far neglected security (because it's not my full-time job, there is always something more important on my todo-list). My server does not contain any secret data and also no lives depend on it - Basically what I want is to make sure it does not become part of a botnet, that is "good enough" security in my case. Anyway, I don't want to become a full-time paranoid admin (like constantly watching and patching everything because of some obscure problem), I also don't care about most security problems like DOS attacks or problems that only exist when using some arcane settings. I'm in search of a "happy medium", for example a list of known important problems in the default installation of CentOS 5.5 and/or a list of security problems that have actually been exploited - not the typical endless list of buffer overflows that "maybe" a problem in some special case. The problem that I have with the usually recommended approaches (joining mailing lists, etc.) is that the really important problems (something where an exploit exists, that is exploitable in a common setup and where the attacker can do something really useful - i.e. not a DOS) are completely and utterly swamped by millions of tiny security alerts that surely are important for high-security servers, but not for me. Thanks for all suggestions!

  Read the article

• Installing Tomcat on CentOS 5

  - by andybaird

  Disclaimer: I am not a server admin, I am a windows user that has lead a life of sinful installation wizards and drag and drop I'm attempting to install Tomcat on CentOS 5 hosted by a MediaTemple dedicated virtual server. I basically followed this guide: Installed jpackage and configured the yum.repo.d jpackage file to set enabled=1 Used yum to install java (yum install java) Downloaded the binary distribution of tomcat with "wget http://archive.apache.org/dist/tomcat/tomcat-6/v6.0.14/bin/apache-tomcat-6.0.14.tar.gz" set JAVA_HOME to point at the jdk location I found with "export JAVA_HOME=/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0/" I gunzip/untar the Tomcat files and run ./startup.sh to start the Tomcat server. That is supposed to put the Tomcat server at myserver.com:8080 - however, I just get a could not contact host error when I try to browse to it (or when I try 'curl localhost:8080' from SSH) After I type ./startup.sh, here is the console output: [root@myserver bin]# ./startup.sh Using CATALINA_BASE: /root/apache-tomcat-6.0.14 Using CATALINA_HOME: /root/apache-tomcat-6.0.14 Using CATALINA_TMPDIR: /root/apache-tomcat-6.0.14/temp Using JRE_HOME: /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0/ [root@myserver bin]# Is there a step I have missed here? Edit: I've now discovered by looking at the log the following error is occuring: Error occurred during initialization of VM Could not reserve enough space for object heap

  Read the article

• Seeking web-based FTP client for very large file upload

  - by Paul M. Nguyen

  I have looked around for these for some time... the limits imposed by the web server and/or the dynamic programming environment (e.g. PHP) are far too restrictive for the application I'm working on. We need to be able to move large graphics and video files to and from clients (ranging from tens of MB to a few GB in a single file). Plain FTP with a proper desktop client will do the trick, and we're hosting this in Amazon EC2 with EBS. User management will be done from the office via webmin. Users are chroot-jailed into their home dir by proftpd. net2ftp will work for many clients, but we often need to move single files that approach 1GB or exceed 2-3GB which is way out of the range of any http-based uploader. So we turn to Java or Flash - can they do it? From within the web browser establish an FTP connection and grab a huge file? There are licensed applets and such out there, but none seem convincing. Again, I'm looking for some code that can speak FTP and read (& write?) the local disk, that is delivered in a web browser, and can move single files of 2GB+. The reason for having a web-based interface to FTP is to skip the software installation step for our clients. I will consider proper desktop client software as long as it's "portable" and at least Win+Mac and can be easily configured by lay-man users in a hurry.

  Read the article

• samba "username map" stopped to work

  - by Kris_R

  It was time to upgrade our group server (new HDs, problems with old installation of DRBD, etc..). Going as usually for CentOS i upgraded whole system from 6.3 to 6.4 The later one came with samba 3.6 as the old one was 3.5. I transferred most of users by copying /etc/password, /etc/shadow and samba accounts with pdbedit. Homes were on nfs-drive. The translation of unix accounts to samba accounts are located in /etc/samba/smbusers. Strangely enough on some windows clients there was problem to connect to samba-shares. In one case the only thing that worked was, instead of giving windows name, to use the unix account. In another one, it was possible to mount network drive and to open it in Windows Explorer, however other applications like "Total commander" at the attempt of opening this drive gave the message "Cannot connect to z:" (sometimes at this moment user/pass were requested). The smb.conf has following entries: [global] security = user passdb backend = tdbsam username map = /etc/samba/smbusers ... [Kris] comment = Kris's Private path = /SMB/Users/Kris writeable = yes read only = no browseable = yes users = krisr printable = no security mask = 0777 force security mode = 0 directory security mask = 0777 force directory security mode = 0 force create mode = 0775 force directory mode = 6775 The smbusers: # Unix_name = SMB_name1 SMB_name2 ... krisr = Kris Of course testparm runs without any errors. I was used from samba 3.5 to outputs of form Mapped user Kris to krisr. Nothing like this happens now. Just message check_sam_security: Couldn't find user Kris in passdb. I read on web that some guys had problem with 3.6 and security = ADS, but these were not helpful for me. I'm seriously thinking about downgrading back to samba 3.5 but before this step I wanted to ask if somebody knows the solution of these problems. p.s. i've asked this question at serverfault but no answer came. Maybe I have more luck with this forum. Sorry for duplicate if any of you reads both.

  Read the article

• /usr/bin/python (Python 2.4) was deleted on CentOS 5. I compiled from source but yum is still broken. How can I get everything back to the way it was?

  - by Maxwell

  I saw a lot of other questions like this but none of them answered the exact part I am having trouble with (actually installing the Python RPM). Someone on my system deleted /usr/bin/python and /usr/bin/python2.4 on my 64 bit CentOS 5.8 installation. I recompiled Python 2.4 from source, but now whenever I try to yum install anything I get the following error: [root@cerulean-OW1 ~]# yum install httpd There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: No module named yum Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is: 2.4 (#1, Dec 16 2012, 09:16:56) [GCC 4.1.2 20080704 (Red Hat 4.1.2-52)] If you cannot solve this problem yourself, please go to the yum faq at: http://wiki.linux.duke.edu/YumFaq I checked http://wiki.linux.duke.edu/YumFaq and it said the following: If you are getting a message that yum itself is the missing module then you probably installed it incorreclty (or installed the source rpm using make/make install). If possible, find a prebuilt rpm that will work for your system like one from Fedora or CentOS. Or, you can download the srpm and do a rpmbuild --rebuild yum*.src.rpm I tried going to http://rpm.pbone.net/index.php3/stat/4/idpl/17838875/dir/centos_5/com/python-2.4.3-46.el5.x86_64.rpm.html to install Python, which resulted in the following error: [root@cerulean-OW1 ~]# rpm -Uvh python-2.4.3-46.el5.x86_64.rpm error: Failed dependencies: python-libs-x86_64 = 2.4.3-46.el5 is needed by python-2.4.3-46.el5.x86_64 So I tried installing python-libs-x86_64, which resulted in the following: [root@cerulean-OW1 ~]# rpm -Uvh python-libs-2.4.3-46.el5_8.2.x86_64.rpm warning: python-libs-2.4.3-46.el5_8.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 192a7d7d Preparing... ########################################### [100%] package python-libs-2.4.3-46.el5_8.2.x86_64 is already installed file /usr/lib64/libpython2.4.so.1.0 from install of python-libs-2.4.3-46.el5_8.2.x86_64 conflicts with file from package python-libs-2.4.3-46.el5_8.2.x86_64

  Read the article

• Tomcat won't shutdown gracefully -how can I tell if the shutdown port is open?

  - by gav

  Hi, I installed Tomcat 6 using the tar-ball via wget. Startup of the server is fine but on shutdown I get a timeout exception. root@88:/usr/local/tomcat/logs# /usr/local/tomcat/bin/shutdown.sh Using CATALINA_BASE: /usr/local/tomcat Using CATALINA_HOME: /usr/local/tomcat Using CATALINA_TMPDIR: /usr/local/tomcat/temp Using JRE_HOME: /usr Using CLASSPATH: /usr/local/tomcat/bin/bootstrap.jar 30-Mar-2010 17:33:41 org.apache.catalina.startup.Catalina stopServer SEVERE: Catalina.stop: java.net.ConnectException: Connection timed out at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) ... I read that this might be because I have a firewall blocking incoming connections on the shutdown port (8005). I have a default Ubuntu 9.04 installation running on a VPS with no rules in my iptables. How can I tell if that port is blocked? How can I check that the server is listening for connections on 8005? Bizarrely pinging localhost or the IP of my server fails from the server itself, whereas pinging the IP of my server from another machine succeeds. Gav

  Read the article

• Windows XP restarting repeatedly after a fresh restore

  - by DWilliams

  I don't normally deal with Windows but someone wanted me to fix their computer with Windows XP on it. It was just restarting every time it tried to boot. It would not go into safe mode, the result was the same regardless of the selected mode. The computer is like 4 years old and has been running the same installation for that entire time, so I figured the easiest solution was just to back up their files and re-install. I loaded the computer up with a live CD and copied their files off to a USB drive, then proceeded to run HP's "factory restore" feature (which I'm not particularly fond of, I'd rather have a disk to install from than reload all the crapware HP gets paid to install for you). It restored, and I put all their files back, installed their programs, and started the full windows update process. Everything seemed great so I left and told them what to do once it finished. A few hours pass, and my phone rings. Apparently it started doing the exact same thing as before once the updates finished. I don't have the computer sitting in front of me now so I can't really provide any more information than that. What could be causing this and, more importantly, how do I fix it? The fact that the same problem resurfaced after the restore makes me think it's either a hardware problem or an update breaking the computer.

  Read the article

• Virus / Malware: Explorer window with strange user logged into Hotmail

  - by abel

  I was looking into a PC, the user of which had complained that he couldn't connect to the internet and that the PC was experiencing random restarts. The PC runs WinXP SP3. On examination, I found that the Wireless Zero Configuration service was stopped. I enabled that and the internet was back on(The pc connected through wifi). Then I started firefox and browsed to gmail.com. I did not launch any other program, except for a few explorer windows. It was then I noticed a window had popped up(it was not a pop up). It had the explorer folder icon and instead of explorer folder contents, it showed a hotmail page, with a user named "Homer Stinson" logged in. The titlebar was empty and there were no toolbars. I asked the client whether this was his email id, which he said it was not. I opened task manager, which did not show this explorer window in it's Application tab. I switched back to the 'rogue' window and found that the hotmail settings page was now open, which later changed to the hotmail edit profile page for the same user. I was not clicking anything. Then suddenly the window closed. I checked the autorun locations, fired up a Malwarebytes Anti Malware scan which gave a clean result. The system also had an updated installation of AVG. I don't want a solution for this virus(?) problem. I asked this here because I wanted to know if somebody has come across something similar. What kind of malware can this be? The user had not seen a similar window before and I should have taken screenshots. (PS:Homer Stinson is an imaginary name. I searched for the other real name with some relevant keywords but could not come up with a virus/malware discussion post.) UPDATE: When I checked the PC later a DEP error had popped up closing which restarted the PC.

  Read the article

• Sharepoint/WSS Reporting Services Integration woes

  - by mhollers

  after a number of failed attempts i seem to have successfully installed the Reporting services add-in to my WSS farm. However, I seem to be missing most of the enhanced functionality eg no report library template, no report center site template. the only additional functionality available is the report viewer web part. background: 2 server WSS 3.0 farm with CA (Central admin) WFE (web front end) and reporting services addin installed on 1, and SQL05 SP2 with Reporting services (RS) and all databases installed on other. I have a VM environment set up and have rolled this back and repeated a number of times. I have configured RS within CA and activated 'Report Server INtegration Feature'. Within the 'site settings' I have a 'Reporting Services' heading with a 'manage shared schedules' item/link, not sure if there should be other options? I was of the understanding that to view reports within sharepoint i could either create a new site using the 'report center' template or add a report library to an existing site, neither of which seems available I am at a loss as to what to do, as all online information seems to do with dealing with installation issues/errors, which i seem to have eventually got past

  Read the article

• How to repair Mac OS X without reinstalling?

  - by RahulVyas

  I have an Intel PC. I have installed iDeneb Mac OS X in my PC. It's running fine. After that I thought about installing Snow Leopard for running the iPad SDK. So I bought a retail Snow Leopard and booted it with Rebel EFI boot loader. When I was installing Snow Leopard, at the end of installation, setup gives an error. So I restarted my PC and boot with Rebel and I saw that the Mac was there so I booted that into safe mode and Mac OS X runs. After that I installed iPad SDK. But when I try to create an application, Xcode is not responsive. It hangs when I choose new project, give it a name and save it on disk. After just as I gave name and choose save it hangs. Is there any way I can repair my Mac OS X without reinstalling? I have also been unable to boot into normal mode and also without Rebel CD. So I want to boot without Rebel CD and also want to run iPad SDK.

  Read the article

• Messed up USB stick doesn't show in blkid

  - by Felix

  I was playing around with a USB stick (booting archlinux with qemu off of it and trying to perform an installation on the same stick at the same time -- brave, I know, but I was just messing around). Now, after failing to boot and install at the same time, it seems I have sort of messed up my stick. What I think happened is that I used cfdisk to wipe everything on it and create one big partition, but formatting it then failed, so now there's a big partition with no filesystem. Just to make it clear: I'm not worried for my stick, I know I can recover it at any point. What I find intriguing is that after plugging the stick into my computer (using Ubuntu), there's no (terminal) way to find out what block device (/dev/sdx) it has associated. The only way I could determine that was with GParted: But blkid shows the following: /dev/sda1: UUID="12F695CFF695B387" LABEL="System Reserved" TYPE="ntfs" /dev/sda2: UUID="A0BAA6EABAA6BC62" TYPE="ntfs" /dev/sdb1: UUID="546aec8b-9ad6-4571-b07a-adba63e25820" TYPE="ext4" /dev/sdb2: UUID="2a8b82d8-6c6e-4053-a446-bab970d93d7c" TYPE="swap" /dev/sdb3: UUID="7cbede7d-c930-4e59-9d1b-01f2d79bd092" TYPE="ext4" No trace of /dev/sdc. My question is: if I didn't have a graphical interface (to use GParted), how would I have known which block device is my stick?

  Read the article

• Switching from prefork MPM to worker MPM + php-fpm on ubuntu

  - by Shane

  All tutorials I found were how to fresh install worker MPM + PHP-FPM, since my wordpress blog's already up and running with prefork MPM, correct me if I'm wrong in the simulated installation process: I'm on ubuntu and according to some tutorials, the following lines would do all the tricks: apt-get install apache2-mpm-worker libapache2-mod-fastcgi php5-fpm php5-gd a2enmod actions fastcgi alias Then you setup configuration in /etc/apache2/conf.d/php5-fpm.conf: <IfModule mod_fastcgi.c> AddHandler php5-fcgi .php Action php5-fcgi /php5-fcgi Alias /php5-fcgi /usr/lib/cgi-bin/php5-fcgi FastCgiExternalServer /usr/lib/cgi-bin/php5-fcgi -host 127.0.0.1:9000 -pass-header Authorization </IfModule> After all these, restart: service apache2 restart && service php5-fpm restart Question: 1) Would it cause any down time in the whole process for previously running sites with prefork MPM? 2) Do you have to change any already existent configuration files like php or mysql or apache2(would they take effect immediately after the switch without you doing anything)? 3) I've already have apc up and running, do you have to re-install/re-configure it after the switch? 4) How do you find out if apache2 is working in worker MPM mode as expected? Thanks a lot!

  Read the article

• Toshiba External Hard Drive freezes computer

  - by Ephraim

  I bought a Toshiba Canvio Basics E05A032BAU2XK Portable External 320GB 2.5 Hard Drive: My computer has two Os's on it Win7 and Win XP. I need both. The main one I use is XP. When booting my computer in any OS the computer and hard drive work fine. The same holds true for plugging in the hard drive while running Win7. However, when running WinXP, if the hard drive gets plugged in the computer freezes(my main point is that the HD is portable so it is essential that it does not do this, as I said I usually run XP). After reading some online forums I was informed that there is a compatibility issue with the newest version of Eset Smart Security(I still don't understand this because it works fine in Win7 or when connected on boot...). I disabled the AV and plugged in the HD... Walla! The comnputer did not freeze. However the disk is not recognized in explorer or disk management. In device manager I removed the device and did a scan and installation of device failed. It pretty much sounds like a driver issue but I cannot find any drivers for this HD. In fact, Toshiba claims that there are no downloadable drivers for it and that XP should take care of the drivers itself. What to do? As far as I can tell, all other USB devices work just fine on both OS. Please Help!

  Read the article

• Can't install PHP after apt-get dist-upgrade

  - by WASD42

  I had a server with perfectly running for months classical LAMP installation on Ubuntu 8.04: Linux localhost 2.6.24-23-generic #1 SMP Wed Apr 1 21:47:28 UTC 2009 i686 GNU/Linux DISTRIB_ID=Ubuntu DISTRIB_RELEASE=8.04 DISTRIB_CODENAME=hardy DISTRIB_DESCRIPTION="Ubuntu 8.04.4 LTS" Don't know why I've started apt-get update, apt-get upgrade but everything ended with apt-get dist-upgrade :) Everything gone alright... But now I can't start nor Apache, nor PHP, because PHP was simply deleted. When I'm trying to install it: > apt-get install php5 <...> The following packages have unmet dependencies: php5: Depends: libapache2-mod-php5 (>= 5.2.4-2ubuntu5.17) but it is not going to be installed or php5-cgi (>= 5.2.4-2ubuntu5.17) but it is not going to be installed E: Broken packages When I'm trying to install libapache2-mod-php5: The following packages have unmet dependencies: libapache2-mod-php5: Depends: php5-common (= 5.2.4-2ubuntu5.17) but 5.3.6-6~dotdeb.1 is to be installed E: Broken packages I don't know what 5.3.6-6~dotdeb.1 is and where is this package, because I've already removed dotdeb repository from APT sources :/ Tried to do apt-get update, apt-get upgrade, apt-get install php5 php5-common php5-cli with no success... Don't know what to try next :(

  Read the article

• Acer recovering windows vista

  - by Charlie Pigarelli

  My computer history is very long even of my computer has 4 years of life. An year ago I installed Windows 7 on this acer m1610 that had Vista before. My technic left me 2 recovery disc for "acer vista" before updating it to Windows 7. Then the computer had some trouble. The graphic card broke and we decided to use another computer. Yesterday I had the great idea to fuse the two computer to have a better one... So I moved the graphic card of the latter computer to the acer and everything gone well. Then the trouble of speed, it had before, come back. So I decided to reinstall the very first Windows: Vista back again. I booted the computer with those 2 DVD-R my technic left me and at the end of the process it asked me to insert "the backup cd number one or the system disk". I found 2 original Acer "Blank Recovery Disc" DVD-R and tried with those: rejected. Tried with empty DVD-+R: rejected. I tried with CDs: rejected. I don't have any system disc with me. Except for those 2 DVD-R my technic left me. What am I supposed to do now? I even tried with these fantomatic alt+f9/f10 that should start the recovery without any disc... But nothing happened. PS: the installation cannot complete if I do not insert the right disk. (The recovery disc uses Acer eRecovery Management as recovery software.

  Read the article

• Ubuntu 11.10 ATI Drivers vesa park

  - by Matthias

  This is probably not an issue, from all I can get it seems my hardware and drivers are properly installed. However when I go to system settings - system info - graphics. I get Driver: VESA:PARK. Experience: Standard. my graphics card is a: Ati Mobility Radeon HD 5470 512MB. I am pretty sure it's not a same-die GPU since there is a fan exhaust at the side of my laptop which I presume is the exhaust for the GPU... I have no clue whatsoever what this means. I installed the ati drivers first using the 'additional drivers' method. However I also decided to look a manual installation up via the terminal since I've had problems before with Ubuntu and ati cards. I used wget and something among the lines of sh dpkg -i. I can recall exactly, I took them from another stackoverflow answer. Anyway, it seems everything is installed properly since it shows up with these commands: sudo lshw -C video fglrxinfo however the first command seems to detect hardware, not the driver per se, although the driver is probably needed to detect the hardware anyway which would indicate its properly installed. I am still not sure about that VES:PARK thing though. I'd like to know what it means.. Also, if someone happens to know a good way of testing if the gpu is connected/being used...some sort of benchmark maybe...I'd like to hear it. P.s. I can find my way around in Ubuntu but I would probably still be considered a rookie by more experienced users.

  Read the article

• How to serve Rails application with Passenger/Apache without domain name?

  - by grifaton

  I am trying to serve a Rails application using Passenger and Apache on a Ubuntu server. The Passenger installation instructions say I should add the following to my Apache configuration file - I assume this is /etc/apache2/httpd.conf. <VirtualHost *:80> ServerName www.yourhost.com DocumentRoot /somewhere/public # <-- be sure to point to 'public'! <Directory /somewhere/public> AllowOverride all # <-- relax Apache security settings Options -MultiViews # <-- MultiViews must be turned off </Directory> </VirtualHost> However, I do not yet have a domain pointing at my server, so I'm not sure what I should put for the ServerName parameter. I have tried the IP address, but when I do that, restarting Apache gives apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [Sun Jan 17 12:49:26 2010] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [Sun Jan 17 12:49:36 2010] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results and pointing the browser at the IP address gives a 500 Internal Server Error. The closest I have got to something sensible is with <VirtualHost efate:80> ServerName efate DocumentRoot /root/jpf/public <Directory /root/jpf/public> AllowOverride all Options -MultiViews </Directory> </VirtualHost> where "efate" is my server's host name. But now pointing my browser at the server's IP address just gives a page saying "It works!" - presumably this is a default page, but I'm not sure where this is being served from. I might be wrong in thinking that the reason I have been unable to get this to work is related to not having a domain name. This is the first time I have used Apache directly - any help would be most gratefully received!

  Read the article

• Compiling Gearman PHP Library for CentOS 5.8

  - by Andrew Ellis

  I've been trying to get Gearman compiled on CentOS 5.8 all afternoon. Unfortunately I am restricted to this version of CentOS by my CTO and how he has our entire network configured. I think it's simply because we don't have enough resources to upgrade our network... But anyways, the problem at hand. I have searched through Server Fault, Stack Overflow, Google, and am unable to locate a working solution. What I have below is stuff I have pieced together from my searching. Searches have told said to install the following via yum: yum -y install --enablerepo=remi boost141-devel libgearman-devel e2fsprogs-devel e2fsprogs gcc44 gcc-c++ To get the Boost headers working correctly I did this: cp -f /usr/lib/boost141/* /usr/lib/ cp -f /usr/lib64/boost141/* /usr/lib64/ rm -f /usr/include/boost ln -s /usr/include/boost141/boost /usr/include/boost With all of the dependancies installed and paths setup I then download and compile gearmand-1.1.2 just fine. wget -O /tmp/gearmand-1.1.2.tar.gz https://launchpad.net/gearmand/1.2/1.1.2/+download/gearmand-1.1.2.tar.gz cd /tmp && tar zxvf gearmand-1.1.2.tar.gz ./configure && make -j8 && make install That works correctly. So now I need to install the Gearman library for PHP. I have attempted through PECL and downloading the source directly, both result in the same error: checking whether to enable gearman support... yes, shared not found configure: error: Please install libgearman What I don't understand is I installed the libgearman-devel package which also installed the core libgearman. The installation installs libgearman-devel-0.14-3.el5.x86_64, libgearman-devel-0.14-3.el5.i386, libgearman-0.14-3.el5.x86_64, and libgearman-0.14-3.el5.i386. Is it possible the package version is lower than what is required? I'm still poking around with this, but figured I'd throw this up to see if anyone has a solution while I continue to research a fix. Thanks!

  Read the article

• Linux Mounting Problem

  - by Sam

  I have an Iomega Network Attached Storage device on my Windows network. I am trying to use a clonezilla live USB flash drive to backup my netbook to my Iomega Network Attached Storage device. The clonezilla USB flash drive runs linux. I'm having trouble getting the Network Attached Storage unit to mount using the following command: mount -t cifs -o username="myUsername" //192.168.1.100/backup /home/partimg The response from linux is: [134.730738] CIFS VFS: cifs_mount failed w/return code = -6 retrying with upper case share name [134.788461] CIFS VFS: cifs_mount failed w/return code = -6 mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) I also tried adding the following to my username: username="myUsername,domain=workgroup" but that did not change the error. I am able to ping the network attached storage unit from linux on my netbook. I also booted from a Slax Live USB Flash Drive and Slax auto-mounted my network attached storage unit via Samba. Unfortunately, I don't believe that I can run clonezilla from inside the Slax installation. Does anyone have any insight about what is wrong with my mount statement? Or is there something peculiar about Iomega drives which makes this impossible?

  Read the article

• Cannot build digiKam

  - by Tichomir Mitkov

  I'm trying to compile digiKam 2.8.0. I have installed the required libraries but cMake seems to stuck without any meaningful reason. Here is the output of cMake: $ cmake -DCMAKE_BUILD_TYPE=relwithdebinfo -DCMAKE_INSTALL_PREFIX=/usr/local . -- Found Qt-Version 4.7.1 (using /usr/bin/qmake) -- Found X11: /usr/lib64/libX11.so -- Found KDE 4.6 include dir: /usr/include -- Found KDE 4.6 library dir: /usr/lib64 -- Found the KDE4 kconfig_compiler preprocessor: /usr/bin/kconfig_compiler -- Found automoc4: /usr/bin/automoc4 -- Local kdegraphics libraries will be compiled... YES -- Handbooks will be compiled..................... YES -- Extract translations files..................... NO -- Translations will be compiled.................. YES -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: libmediawiki ----------------------------------------------------------------------------- -- The following external packages were located on your system. -- This installation will have the extra features provided by these packages. ----------------------------------------------------------------------------- * QJSON - Qt library for handling JSON data ----------------------------------------------------------------------------- -- Congratulations! All external packages have been found. ----------------------------------------------------------------------------- -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: libkgeomap -- Found Qt-Version 4.7.1 (using /usr/bin/qmake) -- Found X11: /usr/lib64/libX11.so -- Check Kexiv2 library in local sub-folder... -- Found Kexiv2 library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkexiv2 -- kexiv2 found, the demo application will be compiled. -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: libkface -- Found Qt-Version 4.7.1 (using /usr/bin/qmake) -- Found X11: /usr/lib64/libX11.so -- First try at finding OpenCV... -- Great, found OpenCV on the first try. -- OpenCV Root directory is /usr/share/opencv -- External libface was not found, use internal version instead... -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: kipi-plugins -- Check Kexiv2 library in local sub-folder... -- Found Kexiv2 library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkexiv2 -- Check for Kdcraw library in local sub-folder... -- Found Kdcraw library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw CMake Error at extra/libkdcraw/cmake/modules/FindKdcraw.cmake:137 (file): file Internal CMake error when trying to open file: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw/libkdcraw/version.h for reading. Call Stack (most recent call first): extra/kipi-plugins/CMakeLists.txt:123 (FIND_PACKAGE) -- Check Kipi library in local sub-folder... -- Found Kipi library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkipi CMake Warning at extra/kipi-plugins/CMakeLists.txt:139 (MESSAGE): libkdcraw: Version information not found, your version is probably too old. -- Found GObject libraries: /usr/lib64/libgobject-2.0.so;/usr/lib64/libgmodule-2.0.so;/usr/lib64/libgthread-2.0.so;/usr/lib64/libglib-2.0.so -- Found GObject includes : /usr/include/glib-2.0/gobject -- Check for Ksane library in local sub-folder... -- Found Ksane library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libksane -- Check for KGeoMap library in local sub-folder... -- Found KGeoMap library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkgeomap -- Check Mediawiki library in local sub-folder... -- Found Mediawiki library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libmediawiki -- Check Vkontakte library in local sub-folder... -- Found Vkontakte library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkvkontakte -- Boost version: 1.38.0 -- libkgeomap: Found version 2.0.0 -- Found X11: /usr/lib64/libX11.so -- CMake version: cmake version 2.8.9 -- CMake version (cleaned): cmake version 2.8.9 -- -- ---------------------------------------------------------------------------------- -- kipi-plugins 2.8.0 dependencies results <http://www.digikam.org> -- -- libjpeg library found.................... YES -- libtiff library found.................... YES -- libpng library found..................... YES -- libkipi library found.................... YES -- libkexiv2 library found.................. YES -- libkdcraw library found.................. YES -- libxml2 library found.................... YES (optional) -- libxslt library found.................... YES (optional) -- libexpat library found................... YES (optional) -- native threads support library found..... YES (optional) -- libopengl library found.................. YES (optional) -- Qt4 OpenGL module found.................. YES -- libopencv library found.................. YES (optional) -- QJson library found...................... YES (optional) -- libgpod library found.................... YES (optional) -- Gdk library found........................ YES (optional) -- libkdepim library found.................. YES (optional) -- qca2 library found....................... YES (optional) -- libkgeomap library found................. YES (optional) -- libmediawiki library found............... YES (optional) -- libkvkontakte library found.............. YES (optional) -- boost library found...................... YES (optional) -- OpenMP library found..................... YES (optional) -- libX11 library found..................... YES (optional) -- libksane library found................... YES (optional) -- -- kipi-plugins will be compiled............ YES -- Shwup will be compiled................... YES (optional) -- YandexFotki will be compiled............. YES (optional) -- HtmlExport will be compiled.............. YES (optional) -- AdvancedSlideshow will be compiled....... YES (optional) -- ImageViewer will be compiled............. YES (optional) -- AcquireImages will be compiled........... YES (optional) -- DNGConverter will be compiled............ YES (optional) -- RemoveRedEyes will be compiled........... YES (optional) -- Debian Screenshots will be compiled...... YES (optional) -- Facebook will be compiled................ YES (optional) -- Imgur will be compiled................... YES (optional) -- VKontakte will be compiled............... YES (optional) -- IpodExport will be compiled.............. YES (optional) -- Calendar will be compiled................ YES (optional) -- GPSSync will be compiled................. YES (optional) -- Mediawiki will be compiled............... YES (optional) -- Panorama will be compiled................ YES (optional) -- ---------------------------------------------------------------------------------- -- -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: digiKam -- Check for Kdcraw library in local sub-folder... -- Found Kdcraw library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw CMake Error at extra/libkdcraw/cmake/modules/FindKdcraw.cmake:137 (file): file Internal CMake error when trying to open file: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw/libkdcraw/version.h for reading. Call Stack (most recent call first): core/CMakeLists.txt:156 (FIND_PACKAGE) -- Check Kexiv2 library in local sub-folder... -- Found Kexiv2 library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkexiv2 -- Check Kipi library in local sub-folder... -- Found Kipi library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkipi -- Check Kface library in local sub-folder... -- Found Kface library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkface -- Check for KGeoMap library in local sub-folder... -- Found KGeoMap library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkgeomap -- PGF_INCLUDE_DIRS = /usr/local/include/libpgf -- PGF_INCLUDEDIR = /usr/local/include/libpgf -- PGF_LIBRARIES = pgf -- PGF_LDFLAGS = -L/usr/local/lib;-lpgf -- PGF_CFLAGS = -I/usr/local/include/libpgf -- PGF_VERSION = 6.12.24 -- PGF_CODEC_VERSION_ID = 61224 -- Could NOT find any working clapack installation -- Boost version: 1.38.0 -- Check for LCMS1 availability... -- Found LCMS1: /usr/lib64/liblcms.so /usr/include -- Paralelized PGF codec disabled... -- Identified libjpeg version: 62 -- Found MySQL server executable at: /usr/sbin/mysqld -- Found MySQL install_db executable at: /usr/bin/mysql_install_db CMake Warning at core/CMakeLists.txt:310 (MESSAGE): libkdcraw: Version information not found, your version is probably too old. -- libkgeomap: Found version 2.0.0 -- Found gphoto2: -L/usr/lib64 -lgphoto2_port;-L/usr/lib64 -lgphoto2 -lgphoto2_port -lm -- WARNING: you are using the obsolete 'PKGCONFIG' macro, use FindPkgConfig -- WARNING: you are using the obsolete 'PKGCONFIG' macro, use FindPkgConfig -- PKGCONFIG() indicates that lqr-1 is not installed (install the package which contains lqr-1.pc if you want to support this feature) -- Could NOT find Lqr-1 (missing: LQR-1_INCLUDE_DIRS LQR-1_LIBRARIES) -- Found SharedDesktopOntologies: /usr/share/ontology -- Found SharedDesktopOntologies: /usr/share/ontology (found version "0.5.0", required is "0.2") -- -- ---------------------------------------------------------------------------------- -- digiKam 2.8.0 dependencies results <http://www.digikam.org> -- -- Qt4 SQL module found..................... YES -- MySQL Server found....................... YES -- MySQL install_db tool found.............. YES -- libtiff library found.................... YES -- libpng library found..................... YES -- libjasper library found.................. YES -- liblcms library found.................... YES -- Boost Graph library found................ YES -- libkipi library found.................... YES -- libkexiv2 library found.................. YES -- libkdcraw library found.................. YES -- libkface library found................... YES -- libkgeomap library found................. YES -- libpgf library found..................... YES (optional) -- libclapack library found................. NO (optional - internal version used instead) -- libgphoto2 and libusb libraries found.... YES (optional) -- libkdepimlibs library found.............. YES (optional) -- Nepomuk libraries found.................. YES (optional) -- libglib2 library found................... YES (optional) -- liblqr-1 library found................... NO (optional - internal version used instead) -- liblensfun library found................. YES (optional) -- Doxygen found............................ YES (optional) -- digiKam can be compiled.................. YES -- ---------------------------------------------------------------------------------- -- -- Adjusting compilation flags for GCC version ( 4.5.1 ) -- Configuring incomplete, errors occurred! Actually this line shows a sign of error CMake Error at extra/libkdcraw/cmake/modules/FindKdcraw.cmake:137 (file): file Internal CMake error when trying to open file: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw/libkdcraw/version.h for reading. 'version.h' doesn't exists instead there is a file 'version.h.cmake' I have installed libkdcraw (64-bit) from sources. I'm using OpenSuse

  Read the article

< Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >