Search Results

Search found 19009 results on 761 pages for 'network shares'.

Page 346/761 | < Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >

• Wireless Bridge -DHCP

  - by Usta

  I was thinking of picking up a couple of TP-Link wireless routers, and setting them to bridge. I have a sep. LAN network that would have one of them, and I'd put one on my internet connection. Would I be able to keep my current IP subnets? (255.255.255.0 and 255.0.0.0) or would I have to pull my IPs from the same IP range. (I want to keep my current DHCP servers in place) The reason I want a bridge is so that I can VPN into the internal network.

  Read the article

• Linux will not activate wireless after device has been re-enabled

  - by XHR

  Using a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again. However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook.

  Read the article

• Gmail/Facebook/Hotmail not opening in Firefox/IE on Windows 7 Home

  - by singlepoint

  Hi, I am unable to open Gmail/Facebook/Hotmail on Firefox/IE on Widows 7 Home. I just unboxed a brand new hp laptop with Norton Security Suite running inside. I get following error message on Firefox. Please help. The connection has timed out The server at www.google.com is taking too long to respond. * The site could be temporarily unavailable or too busy. Try again in a few moments. * If you are unable to load any pages, check your computer's network connection. * If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web

  Read the article

• 1080p HD TV + what is minimum spec pc required to stream HD movie files to it?

  - by rutherford

  I want to stream hi-def (non flash-based) movies from my future minimum spec pc to my network-ready HDTV. What I want to know is a) when streaming from a computer (local wifi network), is the computer's cpu/video/ram resources used to the same extent as it would be if playing back on the computers local screen? If not what are the differences? b) So with streaming hd content what is the minimum spec processor I should go for, if i) only one TV is acting as client ii) two TVs are simultaneous clients.

  Read the article

• SSH disconnects active session after 20 minutes

  - by Paramaeleon

  I’ve just set up a new Linux box (OpenSuSE 12.3 on VmWare). Now I stated that my SSH shell sessions are disconnected exactly after 20 minutes, clearly with activity. (Putty: “Network error: Software caused connection abort”) I already set Putty to send keep alives every 64 sec. In sshd_config, I set ClientAliveInterval 50 ClientAliveCountMax 2 and did a deamon reload. Didn’t help. About two minutes after the link breakdown, ssh reports to /var/log/messages: … … sshd[…]: Timeout, client not responding. … … sshd[…]: pam_unix(sshd:session): session closed for user root I don’t encounter this behaviour when connecting to other virtual machines, so I guess the problem isn’t in the network. Any help is appreciated.

  Read the article

• Unable to access my own websites from our home

  - by user2521866

  Not sure if this is the right place to ask, but i'm gonna have a shot at it. I host a couple of websites with a webhost in the Netherlands. For a couple of days now, i've been unable to connect to them from my home network. When using tracert in the cmd screen, i'm getting a timeout after about 4-5 hops. It seems fine accessing the website from anywhere, except my home network. Other PC's around the house also fail to open the websites. I've tried 'flushing my DNS' as seen in some other topics, but to no avail just yet. One of the websites: http://bit.ly/1hbqs4J I've contacted my host about it as well, but no response yet. Trying to take control of the situation myself now for as much as I can. Regards, Dave

  Read the article

• Windows 2008 R2 on ESXi 4.1 cpu utilization kernel high

  - by MK.

  I have a Win2k8 guest running on ESXi 4.1. The host has 12 cores and the problem happens even if the guest is the only VM on the host. We have 4 cores dedicated to the guest. We noticed that network starts chocking when the CPU load goes up. After some testing we noticed that when running a simple CPU hogging tool set up to run 3 threads at 100% the regular CPU load goes to 75% like it should and the "kernel times" graph in task manager goes up to 25%. My intuition tells me that the network problem and kernel times problem are the same. This is confirmed by another similar VM we created on the same host which doesn't have either of the problems. VMWare tools are obviously installed. The nic is e1000. What else can we do to troubleshoot this?

  Read the article

• SBS 2003 CEICW - Multiple IP's causing error

  - by mushmush

  two IP adresses (different subnets) are assigned to one networkcard. In the Properties window the order is right, however the Server always picks the wrong one as the "default ip". This causes CEICW to fail with an "The DHCP Server service is started, but the DHCP scope does not match the network address of the server's local area network (LAN) adapter." error. The DHCP Server is installed and configured, but not for the other subnet as it is not needed. If i remove the other subnets IP everything works fine. Is there any way around that without temporarily removing the IP adress or configuring DHCP for one more Subnet?

  Read the article

• How to restrict access to other Wifi networks in range?

  - by meetpd

  Is there a way to access connecting to other wifi networks in range? I have an office and there are few wifi networks in range. Some of them are not password protected and invariably I get connected to that wifi first. I have talked to the person who owns that wifi. But he is somehow not listening about adding password to his network. So, is there a way I can block that Wifi network completely so that I do not connect to it? I have Win 7 and Mac at my office.

  Read the article

• have 2 exchange servers to communicate together!

  - by Data-Base

  we have our exchange server 2007 (10.10.2.11) at work with domain "dddddd.com" and ironport and it work just fine! we need to test some thing at work with Exchange 2010 !! so we came up with this idea: we created a locked network and install firewall (10.10.2.88) the locked network has it's own DC and Exchange servers! we used the domain "dddddd.loc" any way it will be deleted! IPs DC 10.0.0.1 EX 10.0.0.11 now the Exchange server up and running in the firewall (10.10.2.88) we opened the ports and forwarded it to the Exchange2010 (10.0.0.11) in our main DC we defined the zone dddddd.loc to the firewall and the MX records as well but when we test we get error now how to make it so that the 2010 will send email directly to the 2007 (we will not use it to more that that)? and the 2007 will send the email to 2010 if the email has the domain dddddd.loc ?

  Read the article

• Package Manager cannot access repositories but internet is working

  - by kazman

  I am currently at a conference in another country and my package manager cannot access repositories. My internet is working fine and I can ping the repositories or go to them in a browser, but package manager fails to access them. If I sudo apt-get update it throws Something wicked happened resolving 'wwwproxy:3128' (-5 - No address associated with hostname) (or Ign's). This proxy corresponds to my proxy at my office back at home, but I have disabled proxy in the package manager. Scanning for best repository doesn't work either, it doesn't manage to connect to any. I have searched for this online and have checked things about my apt.conf file. My apt.conf contains: Acquire::http::proxy "http://wwwproxy:3128/"; Acquire::https::proxy "https://wwwproxy:3128/"; Acquire::ftp::proxy "ftp://wwwproxy:3128/"; Acquire::socks::proxy "socks://wwwproxy:3128/"; If I remove apt.conf (or replace with blank), it makes no difference. I don't see that it should since I am connecting directly (and have set it so in my network options in Package manager network settings) I have also tried some things with resolv.conf (changing name address to primary and secondary dns) to no avail. (im not sure if this would help, following other advice) I am running 12.04. (I wrote this very quickly and wrote down everything I have tried to possibly shorten the troubleshooting process, have very limited time between lectures and need this sorted asap, my apologies)

  Read the article

• Does anyone know of a inexpensive NAT router that has the ability to limit access to the Internet to

  - by Corey

  Does anyone know of a inexpensive NAT router that has the ability to limit access to the Internet to a specific MAC address? I know the Linksys routers have a MAC filtering feature, but it is the opposite of what I need. It allows you to block access to a specific MAC address. I need something that will block all, but allow an exception. I'm dealing with some VOIP issues in my company's network, and I think the answer is to have a separate router on the network for my PBX to use. I want to make sure that other nodes are not allowed to access the Internet via this second router.

  Read the article

• Unable chage IP address for eth0 without restart in Ubunto

  - by Rodnower

  I have Ubuntu 12.04.1 installed. I try to change IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4: auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status Now I issue: sudo service networking restart I have response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart IP changing... Any ideas?

  Read the article

• The Java Tour 2014

  - by Tori Wieldt

  The Java Tour 2014 is series of events (over 75 and counting!) for Java Developers held around the world. The Oracle Events team is producing a Java Tour in coordination with the Oracle Technology Network (OTN) and Java User Groups (JUGs).  Oracle Java Evangelists and Java Champions provide top-notch content and chance to network with other developers.  The Java Tour 2014 allows local, regional-specific Java topics to be addressed both by Oracle and the Java community. You'll hear the latest on Java 8, Java EE, and Java Embedded. Check out the Java Tour 2014 page for cities and dates.  If you would like to host your own event focused on Java 8, you can order a kit of materials. If the tour doesn't make it to your city, OTN and Java Evangelists provides lots of online content: -OTN Technical Articles -YouTube Java Channel -Facebook I <3 Java -NightHacking streaming and replays -Java Forums for questions and conversation  The tour culminates in the biggest Java event of the year, JavaOne. See you in person or online!

  Read the article

• ssh can't connect after server ip changed

  - by Kery

  I have a server with ubuntu installed. After I change the network configuration and restart server, ssh client can't connect server any more. But in the server I can use ssh client to connect itself and the netstat command shows that sshd is listening port 22. And in my computer (win7) ping command is OK to server's new IP. The configuration in /etc/network/interfaces is: auto eth0 iface eth0 inet static address 10.80.x.x netmask 255.255.255.0 gateway 10.80.x.1 I'm very confused about this. Hope somebody can give me some idea. Thank you in advance!!!

  Read the article

• arp across subnets which devices can be detected?

  - by Gobliins

  i have some devices connected in the same physical network (LAN) but in different subnets. I want to detect them all with the ARP from my computer. My Computer is also in the same physical network but on a different subnet. ! The devices have no arp protocol installed (yet). Is it possible to detect the devices (with or withour ARP installed on every device)? If the devices have a MAC-address but no IP-address, can ARP still detect the machines?

  Read the article

• Connecting a Windows 7 client to local Mac OS X server

  - by Sean Dooley

  I was previously able to connect a Windows 7 client to the local Mac OS X server without any issues. Then due to internet connection issues, the router had to be reset. Since then the Windows 7 client has not been able to properly connect to the locacl Mac OS X server. Within Windows Explorer and the Network and Sharing Center, the server shows up in the Network lists, but does not show any folders or files when I click to connect. There are no error messages appearing either. Any ideas what I can do to resolve this?

  Read the article

• My Router is fast when i reset it but slows down seconds later

  - by hglocke

  I have a Belkin N wireless router which until recently worked perfectly fine. Now i have to reset the router every few minutes, otherwise it slows down to a crawl. What can I do? I have tried turning the routers firewall off, but it does not make any difference. As far as I'm aware there have been no recent firmware updates. EDIT: The other devices on my network (laptop and iphone) do not have this problem. I connect to the router using a TP-Link wireless network card and I have already tried uninstalling and installing the driver. Hopefully this will narrow down the problem significantly.

  Read the article

• IPv6 scope id issue with IE

  - by eych

  I have an ASP.NET website that works with Firefox because FF doesn't need the % in the scope-id to be encoded (%25). The website also works on the same machine using IE because I can leave out the scope-id. However, to access the website from another machine in the network, I need to add the scope-id to the IPv6 address. For some reason, using the scope-id doesn't allow an authentication cookie to be created, and the website keeps going back to the login page. Anyone using IE7+ to access an ASP.NET website on a network using IPv6 with an encoded %?

  Read the article

• Template loading slowness on VPN

  - by Mesut

  Hi All We have got lots of Word templates on our network. They are perfectly working on local area network. However, if users try to create a new word document from a template when they are connected to VPN outside of the office, it takes nearly 20 minutes to create a word file which is not reasonable at all. Have you guys ever come across with this type of issue? if yes, any suggestion or help would be appreciated. Many Thanks from now on. Best Regards Mesut

  Read the article

• Battery Life in ubuntu 14.04

  - by user287466

  Today i had fresh installation of ubuntu 14.04 previously i had ubuntu 12.04 and had 5 to 6 hours of battery backup even at constant work, but in 14.04 getting 3 hrs only, tried with tlp but no use. lspci: 0:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)

  Read the article

• Snow Leopard Windows 7 File sharing issue

  - by nsiggel

  Hello, wondering if anyone might have any suggestions on how to fix this issue in file sharing between Snow Leopard and Windows 7. On my home network, I have a system running windows 7 which acts as a file server: \WINDOWS7-A\SHARE I also have an IMac which can access the file share most of the time.... however now comes the problem, as soon as I introduce my Windows 7 Laptop and copy files over from it onto the file server (\Windows7-A), the file server become no longer accessible from the Snow Leopard machine... I assume this somehow has to do with elevated security on the network share having been negotiated between the 2 Windows 7 machines which is no longer allowing the Mac to see the Windows machines... but not sure how to disable this, as the only way I can restore communication between the mac and the Windows 7 machine is to restart it... less than ideal... Any suggestions would be welcome.

  Read the article

• Can't get utouch to show available wifi networks

  - by kellrobinson

  I have ubuntu touch installed on a 2014 Nexus 7. Swiping down from the wireless symbol reveals a "Network" menu with the choices Flight Mode, Wifi Settings, and Cellular Settings. Wifi Settings leads to another menu: Previous Networks, and Other Networks. Previous Networks shows a list of networks used in the past; Other Networks opens an empty box for typing in the name of a network. I don't see any way to show a list of available networks detected by the device. On rare occasions, swiping down the wireless symbol actually does bring up a list of detected networks. But most of the time ubuntu touch exhibits the behavior described above, with no apparent way to bring up the list of available wireless networks. I would like to see a list of the availble networks, if there is a way to do so. Edit: The wifi menu works properly now. Just needed a couple of reboots, it seems. I have other problems, though. If these other problems persist I will make a post specific to them. This device is a 2013 Nexus 7 4G. Not sure how to find the ubuntu version. Can't navigate the settings menu right now because it got stuck and there's no way to go back, except to reboot(!) I'll open multirom manager or boot into recovery and look for the information there.

  Read the article

• How do I know if I need a layer 3 switch?

  - by eekmeter

  We currently have a flat network with a bunch of unmanaged switches. I would like to use VLANs to segregate certain users like guests and I would like to use 802.1x. However, I'm not sure if what I need is a layer 3 or a level 2 switch. From what I understand a layer 3 switch does routing between VLANs. I don't think I need this at the moment but as I said I'm not sure since this is all new to me. What else would a layer 3 switch do for me? Our network is relatively small, less than a 100 users. What exactly does a layer 3 switch do that I can't get with a layer 2 switch? When would I need a layer 3?

  Read the article

• How to access vm inside a vm via VNC?

  - by can.

  For some reasons I installed virtual machines inside a virtual machine, like this: A( B( C )) where A is the physical machine, B is a vm and the network type is NAT. And C is also a virtual machine and the network type is bridged. The OSes are Ubuntu 12.04 and the hypervisors are kvm. I can access B via VNC and via ssh from A, but for C I can't use ssh because C has no IP address at the start. And I assume I can only access C via VNC. I tried something like(on A): iptables -t nat -A PREROUTING -d $ip-of-A -p tcp --dport 6500 -j DNAT --to-destination $ip-of-B:5900 (I referred to this) But it doesn't work. And I'm reading the man pages of iptables and hope someone could help :)

  Read the article

< Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >