Search Results

Search found 23399 results on 936 pages for 'configuration manager'.

Page 347/936 | < Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354 | Next Page >

VPN - force a selective range of ip to run on VPN (linux)

- by Francesco

Preface: I know there are similar question here and there however I'm a kind of newbie on Net stuff so I need an answer on this specific scenario, hoping that can help others too as it is a common problem Let say I cannot do anything on the local switch to change the local ip range, I don't want to use any complicate trick as use VMachine to hide the local ip range but I want to use net tools to solve the issue. Scenario my local net assign me an IP of this class 192.168.1.xxx (ex. 192.168.1.116) and my VPN (VPNC) assign me IP of same class 192.168.1.xxx (ex. 192.168.1.247) Obviously I need VPN to access local address (ex. 192.168.1.100) but when I open any address of the class 192.168.1.xx the route point to my local net and not to the VPN ones. I'm on linux and i'd like gui solution (network manager) in case it is not possible let play with route command. here what network manager offer me: Here my actual route once connected to the VPN: Here some route information (route -n) Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 182.71.21.106 192.168.1.1 255.255.255.255 UGH 0 0 0 wlan0 182.71.21.106 192.168.1.1 255.255.255.255 UGH 0 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 9 0 0 wlan0 192.168.1.246 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 Here my ifconfig : ppp0 Link encap:Point-to-Point Protocol inet addr:192.168.1.247 P-t-P:192.168.1.246 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1 RX packets:3415 errors:0 dropped:0 overruns:0 frame:0 TX packets:2525 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:3682328 (3.6 MB) TX bytes:402315 (402.3 KB) wlan0 Link encap:Ethernet HWaddr 4c:eb:42:06:a3:a6 inet addr:192.168.1.116 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::4eeb:42ff:fe06:a3a6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:72598 errors:0 dropped:0 overruns:0 frame:0 TX packets:42300 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:76000532 (76.0 MB) TX bytes:13919400 (13.9 MB) The Question So basically I would like to add a rule to force this particular address (192.168.1.100) on the VPN and not on my local net

Read the article
How to write re-usable puppet definitions?

- by Oliver Probst

I'd like to write a puppet manifest to install and configure an application on target servers. Parts of this manifest shall be re-usable. Thus I used define for defining my re-usable functionality. Doing so, I've always the problem that there are parts of the definition which are not re-usable. A simple example is a bunch of configuration files to be created. These file must be placed in the same directory. This directory must be created only once. Example: nodes.pp node 'myNode.in.a.domain' { mymodule::addconfig {'configfile1.xml': param => 'somevalue', } mymodule::addconfig {'configfile2.xml': param => 'someothervalue', } } mymodule.pp define mymodule::addconfig ($param) { $config_dir = "/the/directory/" #ensure that directory exits: file { $config_dir: ensure => directory, } #create the configuration file: file { $name: path => "${config_dir}/${name}" content => template('a_template.erb'), require => File[$config_dir], } } This example will fail, because now the resource file {$config_dir: is defined twice. As far as I understood, it is required to extract these parts into a class. Then it looks like this: nodes.pp node 'myNode.in.a.domain' { class { 'mymodule::createConfigurationDirectory': } mymodule::addconfig {'configfile1.xml': param => 'somevalue', require => Class ['mymodule::createConfigurationDirectory'], } mymodule::addconfig {'configfile2.xml': param => 'someothervalue', require => Class ['mymodule::createConfigurationDirectory'], } } But this makes my interface hard use. Every user of my module has to know, that there is a class which is additionally required. For this simple use case the additional class might be acceptable. But with growing module complexity (lots of definitions) I'm a bit afraid of confusing the modules user. So I'd like to know is there a better way to handle this dependencies. Ideally, classes like createConfigurationDirectory are hidden from the user of the modules api. Or are there some other "Best Practices"/Patterns handling such dependencies?

Read the article
How can I get WAMP and a domain name to work on a non-standard port?

- by David Murdoch

I have read countless articles on setting up a domain on WAMP to listen on a port other than 80; none of them are working. I've got Windows Server 2008 (Standard) with IIS 7 installed and running on port 80 (and 443). I've got WAMP installed with the following configuration. Listen 81 ServerName sub.example.com:81 DocumentRoot "C:/Path/To/www" <Directory "C:/Path/To/www"> Options All MultiViews AllowOverride All # onlineoffline tag - don't remove Order Allow,Deny Allow from all </Directory> localhost:81 works with the above configuration but sub.example.com:81 does not. Just to make sure my firewall wasn't getting in the way I have disabled it completely. My sub.example.com domain is already pointing to my server and works on IIS on port 80. Also, if I disable IIS and change the Apache port from 81 to 80 it works. Yes, I am restarting Apache after each httpd.conf change. :-) I don't need any other domain (or sub domains [I don't even care about localhost]) configured which is why I'm not using a VirtualHost. Any ideas what is going on here? What could I be doing wrong? Update Changing Listen to 80 but keeping ServerName as sub.example.com:81 causes navigation to sub.example.com:80 to work; this just doesn't seem right to me. Could ServerName be ignoring the :port part somehow? netstat -a -n | find "TCP": >netstat -a -n | find "TCP" TCP 0.0.0.0:81 0.0.0.0:0 LISTENING TCP 0.0.0.0:135 0.0.0.0:0 LISTENING TCP 0.0.0.0:445 0.0.0.0:0 LISTENING TCP 0.0.0.0:912 0.0.0.0:0 LISTENING ... TCP 127.0.0.1:81 127.0.0.1:49709 TIME_WAIT ...

Read the article
Proxy to restrict access to certain websites

- by ChrisRamakers

Hi all, I'm looking for a solution that allows our office server to function as a proxy that blocks access to certain websites for certain LAN ip's. The solution i'm looking for has to meet these requirements: run on ubuntu server restrict access to certain websites based on a LAN ip (eg: shut out xxx.com for 192.168.1.152) restrict access to a website based on the website url (eg: shut out *.facebook.com) easily configurable (preferably through a web interface, our office manager should be able to operate it thus no commandline fu if possible) preferably opensource Thanks for your time!

Read the article
Windows Server 2008 R2 install reboots unexpectedly during "Completing installation" phase

- by knda

I am attempting to install Windows Server 2008 R2 onto a Cisco UCS C201 M2 rack mounted server but am having major difficulties and wondering if anyone has some insight or items they could recommend for me to look at to get this one resolved. Installation is being attempted via the Cisco remote console (using CIMC's Virtual dvd-rom).. following the first phase of Setup where the installation files are copied to the target hard drive, then a reboot occurs to load Setup from the HDD, mid-way in the "Completing Installation" phase the system then reboots unexpectedly. System configuration Cisco UCS C201 M2 (2RU rack mounted server) 16GB RAM, 2x 73GB 15K SAS, 4x 300GB 10k SAS Add-on cards - Intel quad-port GigE card (no fibre channel cards) Storage - LSI MegaRAID SAS 9261-8i. onboard SATA is disabled (no SATA drives connected) KVM - Belkin No physical DVD-ROM.. :( I have... Run memtest86+, no RAM faults Disabled/enabled SATA support (BIOS) Attempted install from USB DVD-ROM, no effect Attempted unattended install scripted via Cisco Configuration Manager DVD provided Removed Belkin KVM in case that was causing drama Discovered that the Cisco website is "awesome" for searching for PDFs/Drivers cough, reverted back to Google Downloaded latest LSI drivers from LSI's site and used during Server 2008 install checked Windows ISO against checksum's from MS site checked Windows ISO by using it for an install in a VM Running out of ways to troubleshoot this as I am not sure how to enable any sort of 'verbose' mode during the setup process. Next step I have planned is to remove the Intel NIC and try the installation again.. Edit: Problem was the "Cisco INTEL QUAD PT GBE" (1000/PT) .. will have to see if this card is faulty or if it's just drivers.. thanks for the help.

Read the article
BIOS corrupted? How to proceed? Acer Travelmate 290

- by dtlussier

I have a older ACER Travelmate 290 (manufactured in 2002 or 2003), which I recently tried to upgrade to Ubuntu 9.10. After doing the upgrade process it appeared as if I had a problem with my x server configuration, as on the first reboot post-install I heard the Ubuntu startup sound, but had a black screen. I thought I would then reboot again to drop down into text-mode to trouble shoot the x configuration problem. However, when I tried rebooting, something went wrong and since then when I start up the machine I get absolutely nothing except the first hardware check (i.e. HDD light flashes, CD/DVD drive spins, etc.). Other than that the screen remains totally black and I have no HDD or processor activity at all. I have tried restarting it a number of time holding down all kinds of key combinations to try and coax it into the BIOS (if possible) with no luck. I have also tried putting in both a live Linux disc and a Windows install disk without any luck. With a disk in the drive it will spin for a few seconds and then stop. All this has lead me to suspect that the BIOS is somehow corrupt (not sure about the right terminology). I have tried putting a new BIOS image and installer program downloaded from ACER on a USB key to see if it will run when I start up the machine, but no luck. I'm not sure if this method of interacting/updating/flashing the BIOS will work outside of Windows/DOS as both OSs are mentioned kind of ambiguously in the documentation. I have also taken the laptop case apart and inspected the various cards and cannot find any obviously burned out components. I'm not sure how to proceed at this point in terms of components to try, or how to try and load a new BIOS image onto the board. Any advice here would be great, especially from those with experience with this particular line of laptops. Thanks!

Read the article
No option to connect to wireless network

- by Casebash

I don't have any option to connect to wireless. It just doesn't appear in the taskbar at all - even the no wireless networks were found doesn't appear. In network connections, I only have the option of using a wired connection. According to device manager, I have a working VIA Rhine II Fast Ethernet Adapter (this device only appeared after I selected showing hidden devices). I have already attempted restarting the computer a few times. Does anyone have any suggestions?

Read the article
Apple Magic Mouse on Windows XP SP3

- by index

Using generic Windows bluetooth drivers + Apple Wireless Mouse drivers as Bluetooth HID service. The mouse is connected. It just does not do anything. It does not show up under mice in hardware manager, just as Bluetooth HID. Not using the Apple drivers does not work either. I'm using a logilink BT0007

Read the article
How to enable the 2 concurrent (+1 console) sessions on Windows Server 2012

- by Dai

I have a Windows Server 2012 VM running on Windows Azure. I want to enable the ability for 2 simultaneous administrative sessions over Remote Desktop. This is permitted under the EULA for Windows Server 2012. This is NOT the same thing as the fully-blown Terminal Services / RDS feature. In Windows Server 2000 and 2003, multiple concurrent sessions (up to a limit of 2, plus the root /console session) were enabled by default (such that logging-in via RDP without logging-out first would create a new session rather than reconnecting to the old session). In Server 2008 and later it uses single-sessions by default, as this simplifies administration (as most people want to connect to old sessions). In Windows Server 2008 R2, you can add the MMC snap-ins for Remote Desktop Host Configuration which allows you to re-enable concurrent sessions. However, in Server 2012, after adding the Remote Administration snap-ins from Server Manager it seems the Remote Desktop Host Configuration snap-in has been removed. How can I re-enable the multiple concurrent sessions for Remote Desktop for Administration in Windows Server 2012?

Read the article
cisco 2900xl - SNMP - Get mac address of device connected to an interface

- by ankit

Hello all, Basically what i want to do is to find out what is the mac address of a device plugged in to an interface on the switch (FastEthernet0/1 for example) reading through the switch documentaion i found out that i can configure snmp trap on it to make it notify of any new mac address the switch detects by using the command snmp-server enable traps mac-notifiction but for some reason my switch does not support this feature. the only options i see are CORE_SWITCH(config)#snmp-server enable traps ? c2900 Enable SNMP c2900 traps cluster Enable Cluster traps config Enable SNMP config traps entity Enable SNMP entity traps hsrp Enable SNMP HSRP traps snmp Enable SNMP traps vlan-membership Enable VLAN Membership traps vtp Enable SNMP VTP traps <cr> so the other way would be for me to run a cronjon on my gateway to poll the switch periodically using snmp to get new mac addresses i have looked everywhere but cant seem to find the OID that would provide me this information. any help i can get would me very much appreciated ! here's the output from "show version" on my switch Cisco Internetwork Operating System Software IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5.4)WC(1), MAINTENANCE INTERIM SOFTWARE Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Tue 10-Jul-01 11:52 by devgoyal Image text-base: 0x00003000, data-base: 0x00333CD8 ROM: Bootstrap program is C2900XL boot loader CORE_SWITCH uptime is 1 hour, 24 minutes System returned to ROM by power-on System image file is "flash:c2900XL-c3h2s-mz.120-5.4.WC.1.bin" cisco WS-C2912-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K bytes of memory. Processor board ID FAB0409X1WS, with hardware revision 0x01 Last reset from power-on Processor is running Enterprise Edition Software Cluster command switch capable Cluster member switch capable 12 FastEthernet/IEEE 802.3 interface(s) 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:01:42:D0:67:00 Motherboard assembly number: 73-3397-08 Power supply part number: 34-0834-01 Motherboard serial number: FAB040843G4 Power supply serial number: DAB05030HR8 Model revision number: A0 Motherboard revision number: C0 Model number: WS-C2912-XL-EN System serial number: FAB0409X1WS Configuration register is 0xF thanks, -ankit

Read the article
Linux Mint reset display resolution from console

- by wullxz

I have a Linux Mint 13 Xfce in a VMware Workstation 8 VM and set the resolution from 800x600 to 1280x768 and now I get permanently logged out when I try to login. I knew how to get back to my old resolution back in the xorg.conf days but Linux Mint now uses xrandr which won't display any displays when running # xrandr because X is not running (of course not - I can't login over GUI). I know that there are configuration files in /etc/X11/Xsession.d/ because I configured a debian based thinclient's resolution in a file called /etc/X11/Xsession.d/91configure_display but that file doesn't exist in my Linux Mint VM. So, how do I reset my X screen resolution from console? Edit: I forgot to tell you that I can't change resolution in console: # xrandr -s 800x600 Can't open display This message appears every time I use xrandr or xrandr -s *resolution* Update: I tried what bWowk suggested: # export DISPLAY=:0.0 # xrandr -s 800x600 No protocol specified No protocol specified Can't open display :0.0 So, that doesn't work either. Isn't there a configuration file that is executed every time X starts? X is running btw - ps aux | grep X shows one process /usr/bin/X running.

Read the article
SQL Server 2008 R2 and copy-only default value in SQL Server Management Studio

- by user102718

We are using Tivoli Storage Manager for taking backups of the database but sometimes our consultants need to take separate backup copies of the database using Management Studio. If they forget to mark the "copy-only" flag in Management Studio they will mess up the Tivoli's backups (we are running our databases in FULL-recovery mode). Is there a way to set the default value of the Copy-Only flag to true in the Management Studio's "Back Up Database"-window?

Read the article
Postfix connect timing out remotely, working fine locally

- by Moritz

Running Postfix on Debian I cannot connect to send mail any more. It worked until approximately a week ago. I do not recall touching the configuration of the server during that time, which makes it difficult for me to find out what the problem is. When connecting from the server to itself it works fine: root@xxxx:~# telnet localhost 25 Trying 127.0.0.1... Connected to localhost.localdomain. Escape character is '^]'. ehlo localhost 220 mail.xxxx.de ESMTP Postfix (Debian/GNU) 250-mail.xxxx.de 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN quit 221 2.0.0 Bye Connection closed by foreign host. Trying to do the same remotely times out: laptop:~ $ telnet mail.xxxx.de 25 Trying 93.xx.xx.xx... telnet: connect to address 93.xx.xx.xx: Operation timed out telnet: Unable to connect to remote host Configuration is as follows: root@xxxx:~# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix home_mailbox = Maildir/ inet_interfaces = all inet_protocols = ipv4 mailbox_command = mailbox_size_limit = 0 mydestination = localhost.localdomain, localhost.localdomain, localhost myhostname = mail.xxxx.de mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = smtp_tls_note_starttls_offer = yes smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_exceptions_networks = $mynetworks smtpd_sasl_local_domain = smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem smtpd_tls_auth_only = no smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes tls_random_source = dev:/dev/urandom virtual_alias_maps = proxy:mysql:$config_directory/mysql_virtual_alias_maps.cf virtual_gid_maps = static:8 virtual_mailbox_base = /var/vmail virtual_mailbox_domains = proxy:mysql:$config_directory/mysql_virtual_domains_maps.cf virtual_mailbox_maps = proxy:mysql:$config_directory/mysql_virtual_mailbox_maps.cf virtual_minimum_uid = 150 virtual_transport = dovecot Receiving mails is no problem, as is retrieving them remotely. Do you have an idea what I could check next?

Read the article
Re-starting SQL Server and OS restarting

- by rem

Some manipulation with SQL Server require re-starting SQL Server after that. If we restart operation system, does this always mean that we restart SQL Server also (it seems evident that it is so, but just in case I ask to be sure)? Or there could be situation when we should do it explicitely for example by context menu choosing "Restart" in SQL Server Configuration Manager? I.e. could it be necessary for something to restart SQL Server while OS is working?

Read the article
How do I configure PHP5 and Apache2 on Ubuntu Server?

- by rofls

I'm trying to follow these instructions (under the Troubleshooting PHP 5 heading). I have PHP installed and when when I run a2enmod php5 it says "Module php5 already enabled". The problem is I created a file, test.php, that's just this: <?php phpinfo(); ?> and put it in /var/www, like the instructions tell me to, but running curl http://localhost/test.php produces an Apache made 404 that says it can't find that file. I have: ServerName localhost DocumentRoot /var/www in one of the sites-available in the /etc/apache2 directory. I should probably figure this out on my own, but the instructions say for troubleshooting do: "If the problem persists, check your PHP file authorisations (it should be readable at least by Ubuntu user "apache"), and check if the PHP code is correct. For instance, copy your PHP file, replace your whole PHP file content by "" (without the quotation marks): if you get the PHP test page in your web browser, then the problem is in your PHP code, not in Apache or PHP configuration nor in file permissions. If this doesn't work, then it is a problem of file authorisation, Apache or PHP configuration, cache not emptied, or Apache not running or not restarted." And I don't know where the PHP file authorisations are or how to do that.

Read the article
iptables port forwarding works only for localhost

- by Venki

Below is my iptables config. I used this for my accessing a node js website running in port 9000 through port 80. This works fine only if access the website through local host / loop back. When I try to use the ip of eth0, which is assigned by my router through dcp. this does not work, when I use ip like 192.168.0.103 to access the website. I am not able to figure what is wrong here, Already burnt a day in this, still not able to figure out :( Edit: ( more information) Earlier, I was using this configuration to develop the website, i had configured the domain name to point to 127.0.0.1 in the /etc/hosts file. It was working fine, but now I am trying to deploy the website in a vps with static ip, This configuration does not work with both static IP. # redirect port 80 to port 9000 *nat :PREROUTING ACCEPT [57:3896] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [4229:289686] :POSTROUTING ACCEPT [4239:290286] -A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 9000 -A OUTPUT -d 127.0.0.1/32 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 9000 COMMIT # Allow HTTP and HTTPS connections from anywhere (the normal ports for websites and SSL). -A INPUT -p tcp --dport 80 -j ACCEPT -A INPUT -p tcp --dport 443 -j ACCEPT -A INPUT -p tcp --dport 9000 -j ACCEPT -A INPUT -j REJECT

Read the article
Setup of SQLServer 2008 want to reboot

- by Ice

I want to setup a sqlserver 2008 developeredition on my windows-vista notebook but the setup-check want me to reboot first. But this doesn't help after reboot the setup want a reboot again. I got the tip: You can open Regedit, and modify this key"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet?\Control\Session Manager" and delete any value in "PendingFileRenameOperations?" That works for one try, later i have the same strange entries in this particular registry-Key. What could reenter this values?

Read the article
How do I accept all Networks with the same ssid with wicd?

- by rubo77

We have a Mesh network here in my town, where every node creates the same client wlan with the SSID "kiel.freifunk.net". In wicd I can connect to those networks, but I have to choose which of them. In network-manager it was more handy: there was shown only one network with that SSID and if I moved through the room with my laptop, it automatically connects to the nearest network with that SSID name (I think that's called "roaming") Is it possible to achieve this with wicd also?

Read the article
Looking for a short term solution to improve website performance with additional server

- by Tanim Mirza

I am working with a small team to run an internal website running with PHP 5.3.9, MySQL 5.0.77. All the files and database are hosted on a dedicated Linux machine with the following configuration: Intel Xeon E5450 8 CPU cores @3.00GHz, 2992.498 MHz, Cache 6148 KB, Cent OS – Red Hat Enterprise Linux Server release 5.4 We started small and then the database got bigger and now the website performance degraded significantly. We often get server space overrun, mysql overloaded with too many calls, etc. We don't have much experience dealing with these issues. We recently got another server that we were thinking to use to improve performance. Since it has better configuration, some of us wanted to completely move everything to the new machine. But I am trying to find out how we can utilize both machine for optimized performance. I found options such as MySQL clustering, Load balancer, etc. I was wondering if I could get any suggestion for this situation "How to utilize two machines in short term for best performance", that would be great. By short term we are looking for something that we can deploy in a month or so. Thanks in advance for your time.

Read the article
Tomcat deploy error

- by David

When deploying an application with the Tomcat manager I get the following error: FAIL - Failed to deploy application at context path /prademo Tomcat log shows: INFO: HTMLManager: install: Installing context configuration at '/home//webapps/PRA/META-INF/context.xml' from '/home//webapps/PRA' java.io.FileNotFoundException: /home/dstefan/webapps/PRA/META-INF/context.xml (Permission denied) Permission to what? Both PRA and contex.xml have -rwxrwxrwx. Thanks!

Read the article
x64 Windows 7 won't recognize my Sony DV cam DCR-TRV330 through Firewire

- by Korrupzion

Hi, I'm having issues using my Sony DV cam DCR-330 and windows 7 ultimate 64bit. I connect the DV Cam as I do it in another pcs (works flawless in windows windows xp 32 bit and another notebook with the same specs than mine but using windows vista x86) but windows doesn't get any "New hardware" in device manager Is anyone having the same issue than I?

Read the article
Using a Blackberry Bold as an IP Modem on Windows 7

- by Lawrence

I recently installed Windows 7 and now cannot use my Blackberry Bold as a modem (via a USB cable): When I query the modem it is successful. I have added the correct "at" commands. When I try connect it says "connecting modems" but then it times out with the following error: Error 638: The remote server is not responding in a timely fashion. I also have the latest desktop manager software installed.

Read the article
Overriding routes on Openvpn client, iproute, iptables2

- by sarvavijJana

I am looking for some way to route packets based on its destination ports switching regular internet connection and established openvpn tunnel. This is my configuration OpenVPN server ( I have no control over it ) OpenVPN client running ubuntu wlan0 192.168.1.111 - internet connected if Several routes applied on connection to openvpn from server: /sbin/route add -net 207.126.92.3 netmask 255.255.255.255 gw 192.168.1.1 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 5.5.0.1 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 5.5.0.1 And I need to route packets regarding it's destination ports for ex: 80,443 into vpn everything else directly to isp connection 192.168.1.1 What i have used during my attempts: iptables -A OUTPUT -t mangle -p tcp -m multiport ! --dports 80,443 -j MARK --set-xmark 0x1/0xffffffff ip rule add fwmark 0x1 table 100 ip route add default via 192.168.1.1 table 100 I was trying to apply this settings using up/down options of openvpn client configuration All my attempts reduced to successful packet delivery and response only via vpn tunnel. Packets routed bypassing vpn i have used some SNAT to gain proper src address iptables -A POSTROUTING -t nat -o $IF -p tcp -m multiport --dports 80,443 -j SNAT --to $IF_IP failed in SYN-ACK like 0 0,1 0,1: "70","192.168.1.111","X.X.X.X","TCP","34314 > 81 [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=18664016 TSER=0 WS=7" "71","X.X.X.X","192.168.1.111","TCP","81 > 34314 [SYN, ACK] Seq=0 Ack=1 Win=5792 Len=0 MSS=1428 TSV=531584430 TSER=18654692 WS=5" "72","X.X.X.X","192.168.1.111","TCP","81 > 34314 [SYN, ACK] Seq=0 Ack=1 Win=5792 Len=0 MSS=1428 TSV=531584779 TSER=18654692 WS=5" "73","192.168.1.111","X.X.X.X","TCP","34343 > 81 [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=18673732 TSER=0 WS=7" I hope someone has already overcome such a situation or probably knows better approach to fulfill requirements. Please kindly give me a good advice or working solution.

Read the article
HP Procurve 2610 intervlan routing

- by user19039

Can anyone tell me why inter vlan routing is working for all vlans except my newly created vlan 4/ I have an hp procurve 2610. Any help would be appreciated. I have basically this 1 switch with all unmanaged switches attached to the core. We have a second 2610 on port 28 Running configuration: ; J9085A Configuration Editor; Created on release #R.11.25 hostname "Core_HP" interface 22 speed-duplex 100-full exit ip routing snmp-server community "public" Unrestricted vlan 1 name "DEFAULT_VLAN" untagged 1-12,17-22,26-27 ip address 192.168.4.6 255.255.255.0 tagged 25 no untagged 13-16,23-24,28 exit vlan 2 name "WAN" untagged 28 ip address 10.254.254.3 255.255.255.0 exit vlan 3 name "Wireless" untagged 13-16,24 ip address 192.168.7.6 255.255.255.0 ip helper-address 192.168.4.2 tagged 27 exit vlan 35 name "guest" untagged 23 tagged 24 exit vlan 4 name "esxi" untagged 25 ip address 10.10.1.1 255.255.248.0 exit ip route 192.168.5.0 255.255.255.0 10.254.254.1 ip route 192.168.6.0 255.255.255.0 10.254.254.1 ip route 0.0.0.0 0.0.0.0 192.168.4.10 show ip route IP Route Entries Destination Gateway VLAN Type Sub-Type M etric Dist. ------------------ --------------- ---- --------- ---------- - --------- ----- 0.0.0.0/0 192.168.4.10 1 static 1 1 10.10.0.0/21 esxi 4 connected 0 0 10.254.254.0/24 WAN 2 connected 0 0 127.0.0.0/8 reject static 0 250 127.0.0.1/32 lo0 connected 0 0 192.168.4.0/24 DEFAULT_VLAN 1 connected 0 0 192.168.5.0/24 10.254.254.1 2 static 1 1 192.168.6.0/24 10.254.254.1 2 static 1 1 192.168.7.0/24 Wireless 3 connected 0 0 show ip Internet (IP) Service IP Routing : Enabled Default TTL : 64 Arp Age : 20 VLAN | IP Config IP Address Subnet Mask Prox y ARP ------------ + ---------- --------------- --------------- ---- ----- DEFAULT_VLAN | Manual 192.168.4.6 255.255.255.0 No WAN | Manual 10.254.254.3 255.255.255.0 No Wireless | Manual 192.168.7.6 255.255.255.0 No esxi | Manual 10.10.1.1 255.255.248.0 No guest | Disabled

Read the article
Control Less Window gets stuck in Win7

- by dkjain

Hi there is a dialer software (by ISP) that connects to my ISP's wi-fi network. Though it connects to the wi-fi network however a control-less windows gets stuck in the middle of the my win7 desktop screen and does not goes off. I cannot close it or minimize it as there are no controls on it. I want to know how to minimize or close the windows without killing the app via Task Manager. Regards, DK Jain.

Read the article

< Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354 | Next Page >