Search Results

Search found 12766 results on 511 pages for 'little b'.

Page 347/511 | < Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354  | Next Page >

• Laptop battery holds charge, but won't charge any more.

  - by Jeff

  Ok, I'm sure I will need to replace either my battery or my AC adapter, but would rather not buy one if the other is the problem. My problem is. I have a Sager laptop that gets quite a bit of use. The charging has always been a little bit odd. If I was in the process of using it, it would charge just fine and stay On AC power. If I left it alone, however(power settings to ONLY turn off the monitor) in either Ubuntu or Windows 7 it decides that it didn't want to use AC power anymore and would just start draining the battery until it died. Now, suddenly, it won't charge at all. The capacity was great up to this point which happened in an instant. It will recognize the battery but won't see the AC power if plugged in while the battery is in. I can power up the laptop without the battery and it works fine. If I plug in the battery while powered up it will claim it's charging it, but it stays at the same percentage. If I unplug the power, it will switch over to Battery fine, but I have to power down and unplug the battery to get it back on AC power. I've had dying/dead batteries before but they typically won't hold a full charge anymore but it still winds up to 100% then drops quickly when unplugged. This seems more like a chip problem in the battery to me, but I'm not sure. Any ideas?

  Read the article

• Backing up default windows installation with dd from linux running on another partition - is this fe

  - by Marek

  I am preparing to reinstall my system. I am thinking about creating a multi boot with a linux distro+Windows 7 to choose from when starting up. I would love to be able to skip all the hassle of reinstalling Windows and all programs when it starts becoming too slow in the future, thus I would like to mirror my fresh Windows system partition with some programs preinstalled. I am thinking about installing Ubuntu, making a partition for windows, installing windows with the basic environment (Visual Studio, Office, etc.) then booting into Linux and making an image of the windows partition with dd. I am not familiar with linux at all so I am a little afraid something may go wrong along the way. Is it possible to do it this way? Will I be able to partition my existing disk for multi boot easily after I install Ubuntu? Will I be able to recover the Windows partition easily using dd when I will need to re-create a fresh windows partition in the future? What other (better) approach can you recommend to achieve the goal of easy disk mirroring (for free)?

  Read the article

• Windows 7, Printer is unavailable until PC reboot

  - by Cjs

  We are having a problem that I haven't seen before and can find no answers to online. A desktop running Windows 7 is unable to print using network printers. When the user tries, no matter what printer it is, he get's the following message when using Microsoft Office applications: "Current printer is unavailable. Select another printer." When the end user uses Outlook we get the message: "Printing is not available. There are no printers installed. You can select and configure a printer in Windows Control Panel." Now here is the confusing part, if we reboot the pc it works fine for a little while and then goes back to the same old same old. The printers are working fine for every other user as well so I believe it is the user's machine. If anyone has any ideas please let me know. Edit: I'd like to add in that some people were having luck disabling snmp for the printers. Restarting the print spooler doesn't seem to do anything.

  Read the article

• Homebrew large data cluster access for 2 user levels?

  - by Yegor

  The title probably makes little sense, so here is an example. I have a file hosting site, that serves a large amount of semi-randomly accessed files. The setup is as follows: High horsepower front-end +DB server that also does encoding for files that need encoding Fresh file server, which stores newly uploaded content, thats probably (and usually) rapidly accessible, which has 500GB of raided SSD storage, that can push over 3GBit of traffic. 3 cheap node servers, containing 2 x 750GB SATA drives in raid1, where files older than 2 weeks are archived, from the SSD server (mentioned above). Files on each server are accessed via subdomains (via modsec) in a straight forward fashion (server1.domain.com, server2.domain.com, etc) Where I have the problem is this. I introduced a "premium" service where people pay a small fee every month, and get ad-free, quick accesses to stuff on the site. Once they are logged in, they access same files via premium.server1.domain.com via a different modsec script, with a different pass phrase. That all works fine and dandy.... except the cheap node servers are all IO bound, so accessing the files on them via a different, unsaturated network makes no difference, since it cannot read off the drive fast enough. What would be a good way to make files on the site be accessible via 2 different network routes, 1 of which will be saturated (the "free network") while all other files are on an un-saturated "premium" network?

  Read the article

• Can I get all active directory passwords in clear text using reversible encryption?

  - by christian123

  EDIT: Can anybody actually answer the question? Thanks, I don't need no audit trail, I WILL know all the passwords and users can't change them and I will continue to do so. This is not for hacking! We recently migrated away from a old and rusty Linux/Samba domain to an active directory. We had a custom little interface to manage accounts there. It always stored the passwords of all users and all service accounts in cleartext in a secure location (Of course, many of you will certainly not think of this a being secure, but without real exploits nobody could read that) and disabled password changing on the samba domain controller. In addition, no user can ever select his own passwords, we create them using pwgen. We don't change them every 40 days or so, but only every 2 years to reward employees for really learning them and NOT writing them down. We need the passwords to e.g. go into user accounts and modify settings that are too complicated for group policies or to help users. These might certainly be controversial policies, but I want to continue them on AD. Now I save new accounts and their PWGEN-generated (pwgen creates nice sounding random words with nice amounts of vowels, consonants and numbers) manually into the old text-file that the old scripts used to maintain automatically. How can I get this functionality back in AD? I see that there is "reversible encryption" in AD accounts, probably for challenge response authentication systems that need the cleartext password stored on the server. Is there a script that displays all these passwords? That would be great. (Again: I trust my DC not to be compromised.) Or can I have a plugin into AD users&computers that gets a notification of every new password and stores it into a file? On clients that is possible with GINA-dlls, they can get notified about passwords and get the cleartext.

  Read the article

• Coffee spilled inside computer, damaged hard drive

  - by Harpreet

  Today coffee spilled over my table, and some of it (very less) reached the PC case placed under the table. I think little bit of it got inside the PC case through the front. As that happened the fan started running very fast and made noise. I tried to restart to see if it becomes fine, but the computer didn't start again. First it gave an error of "Alert! Air temperature sensor not detected" and didn't start. Next I tried again multiple times of starting the computer but then it gave some memory error. I was not able to start the computer. Incase there's a problem in hard disk or something related to memory, is there any way we can extract our work or data? I am scared if I am not able to extract my work in case some problem occurs like that. What options would I have? Help!! EDIT: I have attached the photo here and you can see the area spilt in red circle. The hard drive electronics have been affected and internal speaker may also have been affected. Any advise on cleaning and if hard drive can work? EDIT 2: Are there any professional services offered to extract data from blemished hard disk, like this one, in case I am not able to run it personally?

  Read the article

• When should NTPd broadcast/broadcastclient be used instead of client/server or peer modes?

  - by Luke404

  The NTP deamon if often used in its simplest mode, which is client/server: you specify one or more server directives in your ntp.conf and your clients will use those servers. In addition to that, when you run your own NTP servers, it is good practice to peer them together, so if one of them looses connectivity to its upstream servers, it will get time from its peers. But NTPd can also work with broadcast and/or multicast distribution of time data, with the documentation stating: broadcast and multicast modes are intended for configurations involving one or a few servers and a possibly very large client population The documentation also says elsewhere: It is possible and frequently useful to configure a host as both broadcast client and broadcast server. A number of hosts configured this way and sharing a common broadcast address will automatically organize themselves in an optimum configuration based on stratum and synchronization distance. I can see one obvious administrative benefit: you don't have to manually specify and update your list of NTP servers in the clients ntp.conf, so to me it looks tempting to use broadcast mode even for a small client population (say 5+ clients with 3~4 servers). I expect network traffic to be a little higher with broadcasts instead of client/server associations, but given the usual gigabit ethernet LAN the impact should be negligible unless you have a very very large number of hosts in the same broadcast domain. At the end of the day, when should broadcast mode be used or avoided? Are there pros and cons I haven't seen?

  Read the article

• How do I stop VLC from stealing my volume buttons

  - by MGOwen

  when I press the volume buttons on my laptop, usually the system volume is changed. However, when I do this with VLC it "steals" the presses and adjusts it's own "volume" instead. The system volume is also changed. I can't find any way to turn this off in VLC. Does anyone know? Update: Sorry, some more details I should have included originally: VLC VERSION: 1.1.4 (and a few previous releases, back to about 1.1.0 or so, I think) OS: Win Vista Pro 32 HARDWARE: Dell 1720 laptop (the volume buttons are little buttons on the front of the unit, they may work something like "media" keyboard volume buttons) Update: The buttons seem to map to Ctrl+Alt+b and Ctrl+Alt+c (according to the shortcut key box in windows shortcut properties) but the VLC advanced preferences hotkeys screen doesn't list these as the keys it uses for volume. I changed it so there are no volume hotkeys in VLC settings - no luck it still steals the presses and adjusts the volume. Also, pressing Ctrl+Alt+b or c doesn't change my system volume, so who knows what windows or VLC are doing to recognise those volume buttons. :(

  Read the article

• VMWare Raw Device Mapping Not Working

  - by George H. Lenzer

  While I'm waiting for VMWare support to get back to me, I thought I'd ask here. I have a 400 gig LUN presented from a fiber channel SAN to my VMWare host. It's legacy from another virtualization platform and I need to keep it as is to avoid a long period of downtime. I formatted my VMFS3 datastore with 4 meg blocks to allow up to 1 TB disks. Then I tried adding my 400 gig disk as a raw device in physical compatibility mode. I get the error: "File is larger than the maximum size supported by datastore 'Base Test'. [Base Test]VMTEST01/VMTEST01_2.vmdk Originally I had the VMFS datastore formatted with 1 meg blocks which was the cause of this problem since the largest disk allowed would be 256 gigs. But I deleted the data store and then reformatted with 4 megs blocks. I've also tried using virtual compatibility mode for the raw device but it still fails. Does anyone have any suggestions? I've been waiting for a little over a week for VMWare, but that's fine because I'm not yet a paying customer. I'm still in the eval phase.

  Read the article

• APC (php accelerator). What situations should I use this?

  - by matthewsteiner

  So I've just got a small vps. I've installed apc, which sped up normal pages by 20% - 30%. I was reading about memcached and came to the conclusion that I can use apc for the same thing (caching objects from database results) if I'm not distributing over other servers. Since I only have the one server, apc will be just as beneficial for caching things in memory. I'm still in development mode, and I'm sure it's hard to tell what would be best for production mode. The thing is, my database queries seem pretty fast (between .0008 and .02). None of my pages are way database intensive. Would it be beneficial to me to cache results in memory? If the database is running well right now, is it going to be having a hard time later? Also, is connecting to the database at all something that costs speed (even if I cache most of my queries, every page has to have a little database interaction for session data). So, basically if I have a limited ram, and one machine, will using apc rather than just letting the database be uncached be much faster? Ideas?

  Read the article

• bootmgr image is corrupt

  - by bacord

  I just replaced my HD with a SSD. I did a brand new install on the SSD and I received the following error after booting BOOTMGR image is corrupt. The system cannot boot. A little configuration for your knowledge. The system used to be a dual boot with XP & windows 7. After replacing the original startup HD with my SSD I changed a setting in the bios to AHCI (I have tested changing it back but this did not help). When I look at the stats on the drive in the bios, it claims that the SSD is in a raid configuration despite the settings not being configured that way. Related System Information: Intel 320 Series 80 GB Sata II SSD JetWay JPA78VM3-H-LF AM2+/AM2 AMD 780V HDMI Micro ATX AMD Motherboard AMD Athlon 64 X2 7 GB ram I have performed 2 fresh installs to no avail. Also, followed this guide and performed option 1 and 2. I have done bootsec/fixmbr and /fixboot. So.. any suggestions?

  Read the article

• Is there a tool that can test what SSL/TLS cipher suites a particular website offers?

  - by Jeremy Powell

  Is there a tool that can test what SSL/TLS cipher suites a particular website offers? I've tried openssl, but if you examine the output: $ echo -n | openssl s_client -connect www.google.com:443 CONNECTED(00000003) depth=1 /C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA verify error:num=20:unable to get local issuer certificate verify return:0 --- Certificate chain 0 s:/C=US/ST=California/L=Mountain View/O=Google Inc/CN=www.google.com i:/C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA 1 s:/C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA i:/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority --- Server certificate -----BEGIN CERTIFICATE----- MIIDITCCAoqgAwIBAgIQL9+89q6RUm0PmqPfQDQ+mjANBgkqhkiG9w0BAQUFADBM MQswCQYDVQQGEwJaQTElMCMGA1UEChMcVGhhd3RlIENvbnN1bHRpbmcgKFB0eSkg THRkLjEWMBQGA1UEAxMNVGhhd3RlIFNHQyBDQTAeFw0wOTEyMTgwMDAwMDBaFw0x MTEyMTgyMzU5NTlaMGgxCzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpDYWxpZm9ybmlh MRYwFAYDVQQHFA1Nb3VudGFpbiBWaWV3MRMwEQYDVQQKFApHb29nbGUgSW5jMRcw FQYDVQQDFA53d3cuZ29vZ2xlLmNvbTCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkC gYEA6PmGD5D6htffvXImttdEAoN4c9kCKO+IRTn7EOh8rqk41XXGOOsKFQebg+jN gtXj9xVoRaELGYW84u+E593y17iYwqG7tcFR39SDAqc9BkJb4SLD3muFXxzW2k6L 05vuuWciKh0R73mkszeK9P4Y/bz5RiNQl/Os/CRGK1w7t0UCAwEAAaOB5zCB5DAM BgNVHRMBAf8EAjAAMDYGA1UdHwQvMC0wK6ApoCeGJWh0dHA6Ly9jcmwudGhhd3Rl LmNvbS9UaGF3dGVTR0NDQS5jcmwwKAYDVR0lBCEwHwYIKwYBBQUHAwEGCCsGAQUF BwMCBglghkgBhvhCBAEwcgYIKwYBBQUHAQEEZjBkMCIGCCsGAQUFBzABhhZodHRw Oi8vb2NzcC50aGF3dGUuY29tMD4GCCsGAQUFBzAChjJodHRwOi8vd3d3LnRoYXd0 ZS5jb20vcmVwb3NpdG9yeS9UaGF3dGVfU0dDX0NBLmNydDANBgkqhkiG9w0BAQUF AAOBgQCfQ89bxFApsb/isJr/aiEdLRLDLE5a+RLizrmCUi3nHX4adpaQedEkUjh5 u2ONgJd8IyAPkU0Wueru9G2Jysa9zCRo1kNbzipYvzwY4OA8Ys+WAi0oR1A04Se6 z5nRUP8pJcA2NhUzUnC+MY+f6H/nEQyNv4SgQhqAibAxWEEHXw== -----END CERTIFICATE----- subject=/C=US/ST=California/L=Mountain View/O=Google Inc/CN=www.google.com issuer=/C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA --- No client certificate CA names sent --- SSL handshake has read 1777 bytes and written 316 bytes --- New, TLSv1/SSLv3, Cipher is AES256-SHA Server public key is 1024 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : AES256-SHA Session-ID: 748E2B5FEFF9EA065DA2F04A06FBF456502F3E64DF1B4FF054F54817C473270C Session-ID-ctx: Master-Key: C4284AE7D76421F782A822B3780FA9677A726A25E1258160CA30D346D65C5F4049DA3D10A41F3FA4816DD9606197FAE5 Key-Arg : None Start Time: 1266259321 Timeout : 300 (sec) Verify return code: 20 (unable to get local issuer certificate) --- it just shows that the cipher suite is something with AES256-SHA. I know I could grep through the hex dump of the conversation, but I was hoping for something a little more elegant. I would prefer Linux tools, but Windows (or other) would be fine. This question is motivated by the security testing I do for PCI and general penetration testing. Update: GregS points out below that the SSL server picks from the cipher suites of the client. So it seems I would need to test all cipher suites one at a time. I think I can hack something together, but is there a tool that does particularly this?

  Read the article

• Internet Troubles - PPPoE vs PPPoA?

  - by AkkA

  I have been having some internet troubles at home (ADSL2+ connection in Australia). We get random drop-outs from the authentication connection. It will keep the connection to the DSL service, but we lose authentication and either have to restart the router/modem (its combined, a Belkin one, not sure on model number) or unplug the phone cable, wait about 30 seconds and plug it in again. I've called the ISP (Telstra) a few times, but they only offer limited support when we dont use their supported hardware. Apparently something had happened on their side, they checked the box again (at least it sounded that simple), and told me it would be fine. It wasnt. I've replaced all the filters around the house, but that didnt help either. We do live a little bit away from the exchange (get a sync speed of about 3000/900), so I thought it could be due to line noise but that hasnt helped. Telstra allow both PPPoE and PPPoA connections (which I'm configuring through my router, dont have software on the PC side). I've been running PPPoA the whole time, would it make any difference changing it to PPPoE? If not, are there any other theories as to why we would be experiencing these drop-outs? It has been fine for at least 12 months, then suddenly started about 2 months ago.

  Read the article

• Does this exist: a standardized way of documenting a file-system structure

  - by eegg

  At work, I'm in charge of maintaining the organization of a whole lot of varied data on a standard file-system. Part of this is coming up with sensible classification (by similarity, need, read/write access, etc), but the bigger part is actually documenting it: what documents/files/media should go where, what should not be in this directory, "for something slightly different, see ../../other-dir", etc. At the moment, I've documented this using a plaintext file filing.txt in every directory I want to document. If someone is unsure what's meant to be in any directory, they read that file. This works alright, but it seems odd that I have this primitive custom solution to a problem that any maintainer of a non-trivial directory structure must experience. Every company I've known of, for example, has some kind of shared file-system where agreed terminology for categorization is important. In my experience, people just have to learn what's what by trial-and-error and experimentation. So allow me to propose a better solution, and hopefully you can tell me if it exists. Any directory on any filesystem can have a hidden plaintext file named .filing. Its contents are descriptive human language. It uses some markup like Markdown, with little more than bold, italic, and (relative) hyperlinks to other directories. Now a suitably-enabled file browser will check for a file named .filing whenever it displays a directory. If it exists, its contents are parsed and displayed in an unobtrusive pane near the directory-path widget. Any links therein can be clicked, and the user will be taken to the target directory of that link. I think that the effort of implementing such a standard would pay back many times over in usability gains. We would have, say, plugins for Nautilus, Konqueror, etc.. It could be used to display directory information in the standard file lists served by webservers. And so on. So, question: does such a thing exist? If not, why not? Do people think it's a worthwhile idea?

  Read the article

• Nginx : Proper use of limit_req_zone and limit_req

  - by xperator

  I have 2 website running on VPS. Their purpose is sharing music files and publishing news. Both of them use wordpress. What I am trying is that I want to prevent little hackers from flooding the webserver and putting stress on the server to make it crash. The problem is that after using limit_req_zone and limit_req my website became very slow. Browsing Wordpress control panel takes a long long time. I tried changing values but it didn't improve much. I guess the problem is Wordpress because it's the only script I am using on both front and back end. Here is the last setting which seems to be more responsive than others : limit_req_zone $binary_remote_addr zone=flood:5m rate=10r/m; location ~ \.php$ { limit_req zone=flood burst=100 nodelay; } What are the optimal values that should be used in my case (wp) ? I want the website have it's normal behavior, On the other hand stopping lifeless people from flooding. Another question, Is it safe and enough to use limit_req only on php files ?

  Read the article

• PEAP validating a secondary domain suffix

  - by sam

  Probably the title is a little bit confusing, let me explain the situation. Our company wants to implement a corporate wireless lan with PEAP authentication. unfortunately someone made a big mistake in our AD design 10 years ago. The domain name we are using "company.ch" is not owned by company but by someone else. so it is not possible to issue a public SSL certificate for the RADIUS server. Our AD is to big to rename it. We already thought about using our private PKI and rollout the CA certificate via GPO but that would only cover our corporate managed clients but not the BYOD (Smartphones, Tablets, Laptops..) Is there a way to add a secondary domain name like “company2.ch” and issue a public certificate and join that radius to that secondary domain aslwell, and configure that secondary dns suffix via DHCP for all the client pools... or is there another way with for example a new radius server which has his own domain company2.ch which is connected with some kind of trust between the company.ch doamin? sorry i'am not a client server guy.. hopefully you get my drift.!?

  Read the article

• Word 2007 won't run, tries to reinstall, fails with error 1402.

  - by eidylon

  Okay, this problem has been plaguing this computer for a while now. We tried googling, and none of the answers found helped to solve the problem. So, I am now posting the answer here for posterity. Office 2007 Home/Student edition was installed on the computer, running Vista (32-bit). One day, Word just up and stopped working. All the other programs continued to operate as expected. But every time you would click the icon for Word, it would pop up an install dialog, with a message reading "Preparing to install...". After a few minutes of the little progress bar going and going, it errors out, and gives error 1402, something to the effect of unable to access registry key HKEY_Local_Machine\Software\Classes\.wll\.... Searching around, every answer i found had to do with reassigning the permissions on this key, giving full rights to SYSTEM or to Everyone, and propagating the changes down to all sub-keys. When ever this was attempted though, it would tell us that we were unable to access the key due to permissions, even though we had run regedit as Administrator and are logged on with an administrative account. We also tried uninstalling Office and reinstalling it, as well as doing a repair install. Both these attempts also threw the same 1402 error. Also of note was that the executable for Word (winword.exe) was MIA and no longer to be found in the Office install directory.

  Read the article

• debugging connection to mysql from python script using MySQLdb

  - by timpone

  I am a python newbie and have a python 2.5 script that is using MySQLdb to connect on OS X 10.5.8. I haven't been able to succesfully connect to the database of interest with this. However, I am able to connect using php's mysqli and also via the mysql cli interface. I get the error: File "build/bdist.macosx-10.5-i386/egg/MySQLdb/connections.py", line 188, in __init__ _mysql_exceptions.OperationalError: (1045, "Access denied for user 'arc_development'@'localhost' (using password: YES)") On my linux box which has the same mysql perms, the script works fine logging in. On my OS X laptop, I am able to create a database named test_python which bypasses mysql authentication scheme. This makes me think that issues like 32bit / 64bit incompatabilities aren't occuring. If I turn on the query log, I get access denied: 100610 20:56:55 4 Connect Access denied for user 'arc_development'@'localhost' (using password: YES) I'm a little bit at a loss to what to do next. Is there any way I can specify in the general log or binary log to get the actual password set on the connection string? How about writing out from connections.py file the value (although not sure how I'd do that)? thanks

  Read the article

• What is the sysadmin's dream network printer? 6-8k pg/mo. Xerox, OkiData, Lexmark and HP are all fail

  - by Jacob

  How do I find out what printer brand and/or type doesn't suck? This information is hard to find and manufacturer's websites won't reveal any issues with certain printers. After 10 years of dealing with network shared printers, I can't say that I have been impressed with any of the printer brands I've seen. Brother's little laser MFPs have been close to ideal for low volume, but that is it, period. OkiData, Lexmark, HP, Xerox solid ink printers, they all sucked in one way or another. Currently I'm looking to replace a Xerox ColorQube 8570 because it fails to print on a regular basis. Sometimes it doesn't even boot VxWorks fully - it just hangs at 2% or whatever. I've used Xerox 8860MFPs and they sucked just as bad. I won't talk about ink jets here, that's most likely not what I'm looking for. We currently spend about $4k on paper and ink per year for this printer at up to 6-8k pages per month, letter, mostly black and white, low color usage. I want the printer to feed paper correctly, not crash and burn when a PDF isn't according to its taste (my favorite Xerox problem here) and with decent drivers for Windows and OS X. Print quality is not of the utmost importance but paper does get sent to customers.

  Read the article

• iMac 20inch (Mid 2007) SL DVD Boot Prohibitory Sign

  - by Caitlann Lloyd

  iMac 20inch (Mid 2007 Build) with Ubuntu 12.0.4 How I got in this situation I had a perfectly healthy Intel iMac running Snow Leopard several months ago. Then I got the dreaded spinning gear and several kernel panics. After getting a little frustrated (failing to find a solution online), I found an old macbook installation disk and used it to access Disk Utility. From here, I erased my entire hard drive leaving me with no OS. I then created a Ubuntu DVD and installed Ubuntu onto the system. Now, on Ubuntu, I wine installed Transmac and burned a Single layer copy (with languages, etc. removed to save space) of Snow Leopard onto a 4.7GB DVD. I tried to boot from it and was met with first the grey apple screen and a spinning cog before the grey apple shortly turned into the infamous prohibitory sign. Note: I met this problem previously when using Disk Utility to create a bootable USB of Snow Leopard, hence I severely doubt it has anything to do with the DVD created. Resources at my disposal 1 x iMac running Ubuntu 6 x 4.7GB DVDs 1 x USB Stick 12GB 1 x Windows 7 Laptop Resources I do not have Firewire cables Access to a prebuilt retail disk (Misplaced) Access to another Mac Apple Warranty I would be hugely grateful if someone was able to tell me how to install Snow Leopard again.

  Read the article

• Does the same lame settings (--alt-preset standard) have differrent names?

  - by erikric

  I've always used windows, and therefore EAC to rip my CDs, but since I've started using Ubuntu more often, I decided to try to rip some albums there. I ended up using k3b (since I found it in the Ubuntu Software center. Tried to install RubyRipper first, but when 'sudo apt-get install ' or UDC fails, a Windows user like me is lost) The real question here is about the settings for the lame encoder. I'm used to just writing --alt-preset standard, and everything works like a charm, but the default in k3b look like this: lame -r --bitwidth 16 --little-endian -s 44.1 -h --tt %t --ta %a --tl %m --ty %y --tc %c --tn %n - %f I assume these are some sensible lame settings, and not a malicious perl script (although it looks like it). It seems to me like some of these ought to be there, and that I can not overwrite the whole thing with my good ol' --alt-preset. So, the question is do I need to replace anything, or is -h the same as old --alt-preset? Is it a difference between '--preset standard' and '--alt-preset standard'? And are those the same as -V 2?

  Read the article

• Is there a way to exclude a specific drive vdi from "snapshots" in VirtualBox?

  - by Graza

  ...or is there another space-efficient way of dealing with the page/swap file of the Guest O/S? I've realised that its quite possible/likely that one of the things which "bloats" the snapshot/diff vdi's when a snapshot is taken is the guest operating system's pagefile. For example, say I have a 2Gb swap-file in a Windows guest OS, and over the course of a few weeks the usage of the swap file has gone over 1Gb a couple of times. When I next create a snapshot, it seems likely that I'd be almost guaranteed around 1Gb of space taken up in the new differencing disk just because of changes in the swap file. Obviously (provided I never did "live" snapshots on running or paused machines, and only ever did them when the machine was shut down), I would not need any of the information in the swap file to be saved. So this would simply be a waste of 1Gb. I'm wondering if there's a way to attach a vdi to a VM and flag it as "exclude from snapshots" - which would mean I could put the swap file on a different vdi which would never be included in a snapshot. Or if anyone has any other suggestions. Or an explanation about why it might not be an issue. I could obviously delete and recreate a swap drive vdi every time I did a snapshot to achieve the same effect, but this is a little more effort than simply clicking "create snapshot"....

  Read the article

• Radeon 6950 - Garbling of text and graphics in certain Windows only

  - by Greg

  This morning I noticed the text in Gmail (in Firefox 4) looked a little funny (kind of thin, maybe some color fringing). I went to work and thought it might be some ClearType issue or something with the way Direct way that FF4 draws to the screen. When I came back from work (I left the computer on), the problem was much worse - way beyond ClearType nit-picking. The text was barely readable. I opened Chrome and there was no such problem. It seems like only Windows that use hardware acceleration are garbled, and ones that use GDI are not. But, I fired up Dragon Age and didn't notice any problems (I only really looked at the main menu though). Here is a link to a screen shot that illustrates the problem. Notice how the Windows Live Mesh window is completely unreadable, the text in Firefox 4 (left) is pretty bad, while Chrome, the Windows Control Panel, and the task bar are perfectly fine. The fact that the problem shows up in screen shots and that it only happens in certain Windows makes me confident that the problem cannot be with the monitor or DVI cable. I am using the AMD Radeon drivers from 4/27/11. The card I have (MSI Frozr II) came with a slight overclock (810Mhz) out of the box, but it looks like when I'm on the Windows desktop it's not running at full clock (CCC reports 450Mhz). Still, I underclocked it to the stock reference clock (800Mhz) and it made no difference. The idle temperature according to Afterburner is 42-44 Celsius, which seems a tad high but not enough to cause a problem - it's cold to the touch if I open up the machine. What the heck could be causing this? The problem varies in intensity. As we speak I'm in Firefox and things look better than they did earlier - it'll probably get worse again soon. Radeon 6950 (MSI Frozr II), Seasonic X 560, Core i5 2500K at stock clockspeeds, 16GB RAM, Asus P8P67 M Pro

  Read the article

• FreeBSD's ng_nat stopping pass the packets periodically

  - by Korjavin Ivan

  I have FreeBSD router: #uname 9.1-STABLE FreeBSD 9.1-STABLE #0: Fri Jan 18 16:20:47 YEKT 2013 It's a powerful computer with a lot of memory #top -S last pid: 45076; load averages: 1.54, 1.46, 1.29 up 0+21:13:28 19:23:46 84 processes: 2 running, 81 sleeping, 1 waiting CPU: 3.1% user, 0.0% nice, 32.1% system, 5.3% interrupt, 59.5% idle Mem: 390M Active, 1441M Inact, 785M Wired, 799M Buf, 5008M Free Swap: 8192M Total, 8192M Free PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 11 root 4 155 ki31 0K 64K RUN 3 71.4H 254.83% idle 13 root 4 -16 - 0K 64K sleep 0 101:52 103.03% ng_queue 0 root 14 -92 0 0K 224K - 2 229:44 16.55% kernel 12 root 17 -84 - 0K 272K WAIT 0 213:32 15.67% intr 40228 root 1 22 0 51060K 25084K select 0 20:27 1.66% snmpd 15052 root 1 52 0 104M 22204K select 2 4:36 0.98% mpd5 19 root 1 16 - 0K 16K syncer 1 0:48 0.20% syncer Its tasks are: NAT via ng_nat and PPPoE server via mpd5. Traffic through - about 300Mbit/s, about 40kpps at peak. Pppoe sessions created - 350 max. ng_nat is configured by by the script: /usr/sbin/ngctl -f- <<-EOF mkpeer ipfw: nat %s out name ipfw:%s %s connect ipfw: %s: %s in msg %s: setaliasaddr 1.1.%s There are 20 such ng_nat nodes, with about 150 clients. Sometimes, the traffic via nat stops. When this happens vmstat reports a lot of FAIL counts vmstat -z | grep -i netgraph ITEM SIZE LIMIT USED FREE REQ FAIL SLEEP NetGraph items: 72, 10266, 1, 376,39178965, 0, 0 NetGraph data items: 72, 10266, 9, 10257,2327948820,2131611,4033 I was tried increase net.graph.maxdata=10240 net.graph.maxalloc=10240 but this doesn't work. It's a new problem (1-2 week). The configuration had been working well for about 5 months and no configuration changes were made leading up to the problems starting. In the last few weeks we have slightly increased traffic (from 270 to 300 mbits) and little more pppoe sessions (300-350). Help me please, how to find and solve my problem?

  Read the article

• grep --color=auto with -i option disables the matching text color, why?

  - by emptyset

  I was messing around with grep and put this in my .zshenv: export GREP_OPTIONS="--color=auto" export GREP_COLORS='mt=1;34' I was bonking my head on the keyboard and changing GREP_COLORS around for a minute trying to figure out why the folder colors were working, but the matching text wasn't. I was doing this: $ grep -R -n -i -e "functionFoo\(" --include=*.cs --exclude-dir=Logs * The line number and file names were set with the default colors, but the matching text wasn't. After spending way too much time, I thought to do this: $ grep -R -n -e "functionFoo\(" --include=*.cs --exclude-dir=Logs * (I removed the -i option.) That's all it took to get the matching text to correctly show up in bold blue. This is a Cygwin on Vista setup, with rxvt running zsh. Any idea why grep colors would break on specifying a case-insensitive match? Update: Under cygwin 1.7, it's a little bit better - case insensitive search works correctly, but it only highlights the word that matches the expression exactly. In other words, "FunctionFoo" highlights "FunctionFoo" but not "functionFoo" and vice versa. Probably a grep issue so I'll be submitting it to that list.

  Read the article

< Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354  | Next Page >