abstract factory pattern - Page 348

Applying Unity in dynamic menu

- by Rajarshi

I was going through Unity 2.0 to check if it has an effective use in our new application. My application is a Windows Forms application and uses a traditional bar menu (at the top), currently. My UIs (Windows Forms) more or less support Dependency Injection pattern since they all work with a class (Presentation Model Class) supplied to them via the constructor. The form then binds to the properties of the supplied P Model class and calls methods on the P Model class to perform its duties. Pretty simple and straightforward. How P Model reacts to the UI actions and responds to them by co-ordinating with the Domain Class (Business Logic/Model) is irrelevant here and thus not mentioned. The object creation sequence to show up one UI from menu then goes like this - Create Business Model instance Create Presentation Model instance with Business Model instance passed to P Model constructor. Create UI instance with Presentation Model instance passed to UI constructor. My present solution: To show an UI in the method above from my menu I would have to refer all assemblies (Business, PModel, UI) from my Menu class. Considering I have split the modules into a number of physical assemblies, that would be a dificult task to add references to about 60 different assemblies. Also the approach is not very scalable since I would certainly need to release more modules and with this approach I would have to change the source code every time I release a new module. So primarily to avoid the reference of so many assemblies from my Menu class (assembly) I did as below - Stored all the dependency described above in a database table (SQL Server), e.g. ModuleShortCode | BModelAssembly | BModelFullTypeName | PModelAssembly | PModelFullTypeName | UIAssembly | UIFullTypeName Now used a static class named "Launcher" with a method "Launch" as below - Launcher.Launch("Discount") Launcher.Launch("Customers") The Launcher internally uses data from the dependency table and uses Activator.CreateInstance() to create each of the objects and uses the instance as constructor parameter to the next object being created, till the UI is built. The UI is then shown as a modal dialog. The code inside Launcher is somewhat like - Form frm = ResolveForm("Discount"); frm.ShowDialog(); The ResolveForm does the trick of building the chain of objects. Can Unity help me here? Now when I did that I did not have enough information on Unity and now that I have studied Unity I think I have been doing more or less the same thing. So I tried to replace my code with Unity. However, as soon as I started I hit a block. If I try to resolve UI forms in my Menu as Form customers = myUnityContainer.Resolve(); or Form customers = myUnityContainer.Resolve(typeof(Customers)); Then either way, I need to refer to my UI assembly from my Menu assembly since the target Type "Customers" need to be known for Unity to resolve it. So I am back to same place since I would have to refer all UI assemblies from the Menu assembly. I understand that with Unity I would have to refer fewer assemblies (only UI assemblies) but those references are needed which defeats my objectives below - Create the chain of objects dynamically without any assembly reference from Menu assembly. This is to avoid Menu source code changing every time I release a new module. My Menu also is built dynamically from a table. Be able to supply new modules just by supplying the new assemblies and inserting the new Dependency row in the table by a database patch. At this stage, I have a feeling that I have to do it the way I was doing, i.e. Activator.CreateInstance() to fulfil all my objectives. I need to verify whether the community thinks the same way as me or have a better suggestion to solve the problem. The post is really long and I sincerely thank you if you come til this point. Waiting for your valuable suggestions. Rajarshi

Read the article

Game logic dynamically extendable architecture implementation patterns

- by Vlad

When coding games there are a lot of cases when you need to inject your logic into existing class dynamically and without making unnecessary dependencies. For an example I have a Rabbit which can be affected by freeze ability so it can't jump. It could be implemented like this: class Rabbit { public bool CanJump { get; set; } void Jump() { if (!CanJump) return; ... } } But If I have more than one ability that can prevent it from jumping? I can't just set one property because some circumstances can be activated simultanously. Another solution? class Rabbit { public bool Frozen { get; set; } public bool InWater { get; set; } bool CanJump { get { return !Frozen && !InWater; } } } Bad. The Rabbit class can't know all the circumstances it can run into. Who knows what else will game designer want to add: may be an ability that changes gravity on an area? May be make a stack of bool values for CanJump property? No, because abilities can be deactivated not in that order in which they were activated. I need a way to seperate ability logic that prevent the Rabbit from jumping from the Rabbit itself. One possible solution for this is making special checking event: class Rabbit { class CheckJumpEventArgs : EventArgs { public bool Veto { get; set; } } public event EventHandler<CheckJumpEvent> OnCheckJump; void Jump() { var args = new CheckJumpEventArgs(); if (OnCheckJump != null) OnCheckJump(this, args); if (!args.Veto) return; ... } } But it's a lot of code! A real Rabbit class would have a lot of properties like this (health and speed attributes, etc). I'm thinking of borrowing something from MVVM pattern where you have all the properties and methods of an object implemented in a way where they can be easily extended from outside. Then I want to use it like this: class FreezeAbility { void ActivateAbility() { _rabbit.CanJump.Push(ReturnFalse); } void DeactivateAbility() { _rabbit.CanJump.Remove(ReturnFalse); } // should be implemented as instance member // so it can be "unsubscribed" bool ReturnFalse(bool previousValue) { return false; } } Is this approach good? What also should I consider? What are other suitable options and patterns? Any ready to use solutions? UPDATE The question is not about how to add different behaviors to an object dynamically but how its (or its behavior) implementation can be extended with external logic. I don't need to add a different behavior but I need a way to modify an exitsing one and I also need a possibiliity to undo changes.

Read the article

What's the best-practice way to update an Adapter's underlying data?

- by skyler

I'm running into an IllegalStateException updating an underlying List to an Adapter (might be an ArrayAdapter or an extension of BaseAdapter, I don't remember). I do not have or remember the text of the exception at the moment, but it says something to the effect of the List's content changing without the Adapter having been notified of the change. This List /may/ be updated from another thread other than the UI thread (main). After I update this list (adding an item), I call notifyDataSetChanged. The issue seems to be that the Adapter, or ListView attached to the Adapter attempts to update itself before this method is invoked. When this happens, the IllegalStateException is thrown. If I set the ListView's visibility to GONE before the update, then VISIBLE again, no error occurs. But this isn't always practical. I read somewhere that you cannot modify the underlying this from another thread--this would seem to limit an MVC pattern, as with this particular List, I want to add items from different threads. I assumed that as long as I called notifyDataSetChanged() I'd be safe--that the Adapter didn't revisit the underlying List until this method was invoked but this doesn't seem to be the case. I suppose what I'm asking is, can it be safe to update the underlying List from threads other than the UI? Additionally, if I want to modify the data within an Adapter, do I modify the underlying List or the Adapter itself (via its add(), etc. methods). Modifying the data through the Adapter seems wrong. I came across a thread on another site from someone who seems to be having a similar problem to mine: http://osdir.com/ml/Android-Developers/2010-04/msg01199.html (this is from where I grabbed the Visibility.GONE and .VISIBLE idea). To give you a better idea of my particular problem, I'll describe a bit of how my List, Adapter, etc. are set up. I've an object named Queue that contains a LinkedList. Queue extends Observable, and when things are added to its internal list through its methods, I call setChanged() and notifyListeners(). This Queue object can have items added or removed from any number of threads. I have a single "queue view" Activity that contains an Adapter. This Activity, in its onCreate() method, registers an Observer listener to my Queue object. In the Observer's update() method I call notifyDataSetChanged() on the Adapter. I added a lot of log output and determined that when this IllegalStateExcption occurs that my Observer callback was never invoked. So it's as if the Adapter noticed the List's change before the Observer had a chance to notify its Observers, and call my method to notify the Adapter that the contents had changed. So I suppose what I'm asking is, is this a good way to rig-up an Adapter? Is this a problem because I'm updating the Adapter's contents from a thread other than the UI thread? If this is the case, I may have a solution in mind (give the Queue object a Handler to the UI thread when it's created, and make all List modifications using that Handler, but this seems improper). I realize that this is a very open-ended post, but I'm a bit lost on this and would appreciate any comments on what I've written.

Read the article

How do I Insert Record MVVM through WCF

- by DG KOL

Hello, I’m new in MVVM Pattern (Using Galasoft MVVM Light toolkit). I’ve created a Test Project where I want to fetch some records from Database through WCF. This is working fine but I’ve failed to insert new record from View; Here is My Code: Database Table Name: TestUser (First Name, LastName) WCF (NWCustomer) Two Methods Public List<TestUser> GetAllUsers() [“LINQ2SQL Operation”] Public bool AddUser(TestUser testuser) Public bool AddUser(TestUser testuser) { try { using (DBDataContext db = new DBDataContext()) { TestUser test = new TestUser() { FirstName = testuser.FirstName, LastName = testuser.LastName }; db.TestUser.InsertOnSubmit(test); db.SubmitChanges(); } } catch (Exception ex) { return false; } return true; } Silverlight Project MODEL consists ITestUserService.cs TestUserService.cs public void AddTestTable(TestTableViewModel testuser, Action<bool> callback) { NWCustomerClient client = new NWCustomerClient("BasicHttpBinding_NWCustomer"); client.AddTestUserCompleted += (s, e) => { var userCallback = e.UserState as Action<bool>; if (userCallback == null) { return; } if (e.Error == null) { userCallback(e.Result); return; } userCallback(false); }; client.AddTestUserAsync(testuser.Model); } VIEWMODEL TestUserViewModel public TestUser User { get; private set; } public const string DirtyVisibilityPropertyName = "DirtyVisibility"; private Visibility _dirty = Visibility.Collapsed; public Visibility DirtyVisibility { get { return _dirty; } set { if (_dirty == value) { return; } _dirty = value; RaisePropertyChanged(DirtyVisibilityPropertyName); } } public TestUserViewModel (TestUser user) { User = user; user.PropertyChanged += (s, e) => { DirtyVisibility = Visibility.Visible; }; } MainViewModel public ObservableCollection<TestUserViewModel> TestTables { get; private set; } public const string ErrorMessagePropertyName = "ErrorMessage"; private string _errorMessage = string.Empty; public string ErrorMessage { get { return _errorMessage; } set { if (_errorMessage == value) { return; } _errorMessage = value; RaisePropertyChanged(ErrorMessagePropertyName); } } private ITestUserService _service; public RelayCommand< TestUserViewModel> AddTestUserRecord { get; private set; } public MainTestTableViewModel (ICustomerService service) { _service = service; TestTables = new ObservableCollection<TestTableViewModel>(); service.GetAllTestTable(HandleResult); } private void HandleResult(IEnumerable<TestTable> result, Exception ex) { TestTables.Clear(); if (ex != null) { //Error return; } if (result == null) { return; } foreach (var test in result) { var table = new TestTableViewModel(test); TestTables.Add(table); } } XAML <Grid x:Name="LayoutRoot"> <StackPanel> <TextBox Text="FirstName" /> <TextBox Text="LastName" /> <Button Content="Add Record" Command="{Binding AddTestUserRecord}" /> </StackPanel> </Grid> I want to add records into TestTable (Database Table). How do I insert record? In XAML two text box and a button control is present. Thanking you. DG

Read the article

Abstracting the adding of click events to elements selected by class using jQuery

- by baroquedub

I'm slowly getting up to speed with jQuery and am starting to want to abstract my code. I'm running into problems trying to define click events at page load. In the code below, I'm trying to run through each div with the 'block' class and add events to some of its child elements by selecting them by class: <script language="javascript" type="text/javascript"> $(document).ready(function (){ $('HTML').addClass('JS'); // if JS enabled, hide answers $(".block").each(function() { problem = $(this).children('.problem'); button = $(this).children('.showButton'); problem.data('currentState', 'off'); button.click(function() { if ((problem.data('currentState')) == 'off'){ button.children('.btn').html('Hide'); problem.data('currentState', 'on'); problem.fadeIn('slow'); } else if ((problem.data('currentState')) == 'on'){ button.children('.btn').html('Solve'); problem.data('currentState', 'off'); problem.fadeOut('fast'); } return false; }); }); }); </script> <style media="all" type="text/css"> .JS div.problem{display:none;} </style> <div class="block"> <div class="showButton"> <a href="#" title="Show solution" class="btn">Solve</a> </div> <div class="problem"> <p>Answer 1</p> </div> </div> <div class="block"> <div class="showButton"> <a href="#" title="Show solution" class="btn">Solve</a> </div> <div class="problem"> <p>Answer 2</p> </div> </div> Unfortunately using this, only the last of the divs' button actually works. The event is not 'localised' (if that's the right word for it?) i.e. the event is only applied to the last $(".block") in the each method. So I have to laboriously add ids for each element and define my click events one by one. Surely there's a better way! Can anyone tell me what I'm doing wrong? And how I can get rid of the need for those IDs (I want this to work on dynamically generated pages where I might not know how many 'blocks' there are...) <script language="javascript" type="text/javascript"> $(document).ready(function (){ $('HTML').addClass('JS'); // if JS enabled, hide answers // Preferred version DOESN'T' WORK // So have to add ids to each element and laboriously set-up each one in turn... $('#problem1').data('currentState', 'off'); $('#showButton1').click(function() { if (($('#problem1').data('currentState')) == 'off'){ $('#showButton1 > a').html('Hide'); $('#problem1').data('currentState', 'on'); $('#problem1').fadeIn('slow'); } else if (($('#problem1').data('currentState')) == 'on'){ $('#showButton1 > a').html('Solve'); $('#problem1').data('currentState', 'off'); $('#problem1').fadeOut('fast'); } return false; }); $('#problem2').data('currentState', 'off'); $('#showButton2').click(function() { if (($('#problem2').data('currentState')) == 'off'){ $('#showButton2 > a').html('Hide'); $('#problem2').data('currentState', 'on'); $('#problem2').fadeIn('slow'); } else if (($('#problem2').data('currentState')) == 'on'){ $('#showButton2 > a').html('Solve'); $('#problem2').data('currentState', 'off'); $('#problem2').fadeOut('fast'); } return false; }); }); </script> <style media="all" type="text/css"> .JS div.problem{display:none;} </style> <div class="block"> <div class="showButton" id="showButton1"> <a href="#" title="Show solution" class="btn">Solve</a> </div> <div class="problem" id="problem1"> <p>Answer 1</p> </div> </div> <div class="block"> <div class="showButton" id="showButton2"> <a href="#" title="Show solution" class="btn">Solve</a> </div> <div class="problem" id="problem2"> <p>Answer 2</p> </div> </div>

Read the article

How do you overide a class that is called by another class with parent::method

- by dan.codes

I am trying to extend Mage_Catalog_Block_Product_View I have it setup in my local directory as its own module and everything works fine, I wasn't getting the results that I wanted. I then saw that another class extended that class as well. The method I am trying to override is the protected function _prepareLayout() This is the function class Mage_Review_Block_Product_View extends Mage_Catalog_Block_Product_View protected function _prepareLayout() { $this->getLayout()->createBlock('catalog/breadcrumbs'); $headBlock = $this->getLayout()->getBlock('head'); if ($headBlock) { $title = $this->getProduct()->getMetaTitle(); if ($title) { $headBlock->setTitle($title); } $keyword = $this->getProduct()->getMetaKeyword(); $currentCategory = Mage::registry('current_category'); if ($keyword) { $headBlock->setKeywords($keyword); } elseif($currentCategory) { $headBlock->setKeywords($this->getProduct()->getName()); } $description = $this->getProduct()->getMetaDescription(); if ($description) { $headBlock->setDescription( ($description) ); } else { $headBlock->setDescription( $this->getProduct()->getDescription() ); } } return parent::_prepareLayout(); } I am trying to modify it just a bit with the following, keep in mind I know there is a title prefix and suffix but I needed it only for the product page and also I needed to add text to the description. class MyCompany_Catalog_Block_Product_View extends Mage_Catalog_Block_Product_View protected function _prepareLayout() { $storeId = Mage::app()->getStore()->getId(); $this->getLayout()->createBlock('catalog/breadcrumbs'); $headBlock = $this->getLayout()->getBlock('head'); if ($headBlock) { $title = $this->getProduct()->getMetaTitle(); if ($title) { if($storeId == 2){ $title = "Pool Supplies Fast - " .$title; $headBlock->setTitle($title); } $headBlock->setTitle($title); }else{ $path = Mage::helper('catalog')->getBreadcrumbPath(); foreach ($path as $name => $breadcrumb) { $title[] = $breadcrumb['label']; } $newTitle = "Pool Supplies Fast - " . join($this->getTitleSeparator(), array_reverse($title)); $headBlock->setTitle($newTitle); } $keyword = $this->getProduct()->getMetaKeyword(); $currentCategory = Mage::registry('current_category'); if ($keyword) { $headBlock->setKeywords($keyword); } elseif($currentCategory) { $headBlock->setKeywords($this->getProduct()->getName()); } $description = $this->getProduct()->getMetaDescription(); if ($description) { if($storeId == 2){ $description = "Pool Supplies Fast - ". $this->getProduct()->getName() . " - " . $description; $headBlock->setDescription( ($description) ); }else{ $headBlock->setDescription( ($description) ); } } else { if($storeId == 2){ $description = "Pool Supplies Fast: ". $this->getProduct()->getName() . " - " . $this->getProduct()->getDescription(); $headBlock->setDescription( ($description) ); }else{ $headBlock->setDescription( $this->getProduct()->getDescription() ); } } } return Mage_Catalog_Block_Product_Abstract::_prepareLayout(); } This executs fine but then I notice that the following class Mage_Review_Block_Product_View_List extends which extends Mage_Review_Block_Product_View and that extends Mage_Catalog_Block_Product_View as well. Inside this class they call the _prepareLayout as well and call the parent with parent::_prepareLayout() class Mage_Review_Block_Product_View_List extends Mage_Review_Block_Product_View protected function _prepareLayout() { parent::_prepareLayout(); if ($toolbar = $this->getLayout()->getBlock('product_review_list.toolbar')) { $toolbar->setCollection($this->getReviewsCollection()); $this->setChild('toolbar', $toolbar); } return $this; } So obviously this just calls the same class I am extending and runs the function I am overiding but it doesn't get to my class because it is not in my class hierarchy and since it gets called after my class all the stuff in the parent class override what I have set. I'm not sure about the best way to extend this type of class and method, there has to be a good way to do this, I keep finding I am running into issues when trying to overide these prepare methods that are derived from the abstract classes, there seems to be so many classes overriding them and calling parent::method. What is the best way to override these functions?

Read the article

how to make a javascript number keypad popup

- by user2434653

i have a website with 3 pages. each page has a form with two input fields. i am trying to make a popup number-keypad that will populate what ever input field called it. below is that base code i keep coming back to. <html> <head><title>test</title></head> <body> <script> function num(id) { return document.getElementById(id); } </script> <form action="/unitPage" method="POST" style=" text-align:center;"> Prefix: <input id="num" name"prefix" type="text" onfocus="num('keypad').style.display='inline-block';"/> Number: <input id="num" name"number" type="text" pattern="[0-9]{6}" onfocus="num('keypad').style.display='inline-block';"/> </form> <div id="keypad" style="display:none; background:#AAA; vertical-align:top;"> <input type="button" value="7" onclick="num('num').value+=7;"/> <input type="button" value="8" onclick="num('num').value+=8;"/> <input type="button" value="9" onclick="num('num').value+=9;"/><br/> <input type="button" value="4" onclick="num('num').value+=4;"/> <input type="button" value="5" onclick="num('num').value+=5;"/> <input type="button" value="6" onclick="num('num').value+=6;"/><br/> <input type="button" value="1" onclick="num('num').value+=1;"/> <input type="button" value="2" onclick="num('num').value+=2;"/> <input type="button" value="3" onclick="num('num').value+=3;"/><br/> <input type="button" value="X" onclick="num('keypad').style.display='none'"/> <input type="button" value="0" onclick="num('num').value+=0;"/> <input type="button" value="←" onclick="num('num').value=num('num').value.substr(0,num('num').value.length-1);"/> </div> </body> </html> is there a way of making one number key pad that i call from any page or do i need to make the above for each input? thanks

Read the article

Is it possible to shuffle a 2D matrix while preserving row AND column frequencies?

- by j_random_hacker

Suppose I have a 2D array like the following: GACTG AGATA TCCGA Each array element is taken from a small finite set (in my case, DNA nucleotides -- {A, C, G, T}). I would like to randomly shuffle this array somehow while preserving both row and column nucleotide frequencies. Is this possible? Can it be done efficiently? [EDIT]: By this I mean I want to produce a new matrix where each row has the same number of As, Cs, Gs and Ts as the corresponding row of the original matrix, and where each column has the same number of As, Cs, Gs and Ts as the corresponding column of the original matrix. Permuting the rows or columns of the original matrix will not achieve this in general. (E.g. for the example above, the top row has 2 Gs, and 1 each of A, C and T; if this row was swapped with row 2, the top row in the resulting matrix would have 3 As, 1 G and 1 T.) It's simple enough to preserve just column frequencies by shuffling a column at a time, and likewise for rows. But doing this will in general alter the frequencies of the other kind. My thoughts so far: If it's possible to pick 2 rows and 2 columns so that the 4 elements at the corners of this rectangle have the pattern XY YX for some pair of distinct elements X and Y, then replacing these 4 elements with YX XY will maintain both row and column frequencies. In the example at the top, this can be done for (at least) rows 1 and 2 and columns 2 and 5 (whose corners give the 2x2 matrix AG;GA), and for rows 1 and 3 and columns 1 and 4 (whose corners give GT;TG). Clearly this could be repeated a number of times to produce some level of randomisation. Generalising a bit, any "subrectangle" induced by a subset of rows and a subset of columns, in which the frequencies of all rows are the same and the frequencies of all columns are the same, can have both its rows and columns permuted to produce a valid complete rectangle. (Of these, only those subrectangles in which at least 1 element is changed are actually interesting.) Big questions: Are all valid complete matrices reachable by a series of such "subrectangle rearrangements"? I suspect the answer is yes. Are all valid subrectangle rearrangements decomposable into a series of 2x2 swaps? I suspect the answer is no, but I hope it's yes, since that would seem to make it easier to come up with an efficient algorithm. Can some or all of the valid rearrangements be computed efficiently? This question addresses a special case in which the set of possible elements is {0, 1}. The solutions people have come up with there are similar to what I have come up with myself, and are probably usable, but not ideal as they require an arbitrary amount of backtracking to work correctly. Also I'm concerned that only 2x2 swaps are considered. Finally, I would ideally like a solution that can be proven to select a matrix uniformly at random from the set of all matrices having identical row frequencies and column frequencies to the original. I know, I'm asking for a lot :)

Read the article

SOAP and NHibernate Session in C#

- by Anonymous Coward

In a set of SOAP web services the user is authenticated with custom SOAP header (username/password). Each time the user call a WS the following Auth method is called to authenticate and retrieve User object from NHibernate session: [...] public Services : Base { private User user; [...] public string myWS(string username, string password) { if( Auth(username, password) ) { [...] } } } public Base : WebService { protected static ISessionFactory sesFactory; protected static ISession session; static Base { Configuration conf = new Configuration(); [...] sesFactory = conf.BuildSessionFactory(); } private bool Auth(...) { session = sesFactory.OpenSession(); MembershipUser user = null; if (UserCredentials != null && Membership.ValidateUser(username, password)) { luser = Membership.GetUser(username); } ... try { user = (User)session.Get(typeof(User), luser.ProviderUserKey.ToString()); } catch { user = null; throw new [...] } return user != null; } } When the WS work is done the session is cleaned up nicely and everything works: the WSs create, modify and change objects and Nhibernate save them in the DB. The problems come when an user (same username/password) calls the same WS at same time from different clients (machines). The state of the saved objects are inconsistent. How do I manage the session correctly to avoid this? I searched and the documentation about Session management in NHibernate is really vast. Should I Lock over user object? Should I set up a "session share" management between WS calls from same user? Should I use Transaction in some savvy way? Thanks Update1 Yes, mSession is 'session'. Update2 Even with a non-static session object the data saved in the DB are inconsistent. The pattern I use to insert/save object is the following: var return_value = [...]; try { using(ITransaction tx = session.Transaction) { tx.Begin(); MyType obj = new MyType(); user.field = user.field - obj.field; // The fields names are i.e. but this is actually what happens. session.Save(user); session.Save(obj); tx.Commit(); return_value = obj.another_field; } } catch ([...]) { // Handling exceptions... } finally { // Clean up session.Flush(); session.Close(); } return return_value; All new objects (MyType) are correctly saved but the user.field status is not as I would expect. Even obj.another_field is correct (the field is an ID with generated=on-save policy). It is like 'user.field = user.field - obj.field;' is executed more times then necessary.

Read the article

Many-to-one relation exception due to closed session after loading

- by Nick Thissen

Hi, I am using NHibernate (version 1.2.1) for the first time so I wrote a simple test application (an ASP.NET project) that uses it. In my database I have two tables: Persons and Categories. Each person gets one category, seems easy enough. | Persons | | Categories | |--------------| |--------------| | Id (PK) | | Id (PK) | | Firstname | | CategoryName | | Lastname | | CreatedTime | | CategoryId | | UpdatedTime | | CreatedTime | | Deleted | | UpdatedTime | | Deleted | The Id, CreatedTime, UpdatedTime and Deleted attributes are a convention I use in all my tables, so I have tried to bring this fact into an additional abstraction layer. I have a project DatabaseFramework which has three important classes: Entity: an abstract class that defines these four properties. All 'entity objects' (in this case Person and Category) must inherit Entity. IEntityManager: a generic interface (type parameter as Entity) that defines methods like Load, Insert, Update, etc. NHibernateEntityManager: an implementation of this interface using NHibernate to do the loading, saving, etc. Now, the Person and Category classes are straightforward, they just define the attributes of the tables of course (keeping in mind that four of them are in the base Entity class). Since the Persons table is related to the Categories table via the CategoryId attribute, the Person class has a Category property that holds the related category. However, in my webpage, I will also need the name of this category (CategoryName), for databinding purposes for example. So I created an additional property CategoryName that returns the CategoryName property of the current Category property, or an empty string if the Category is null: Namespace Database Public Class Person Inherits DatabaseFramework.Entity Public Overridable Property Firstname As String Public Overridable Property Lastname As String Public Overridable Property Category As Category Public Overridable ReadOnly Property CategoryName As String Get Return If(Me.Category Is Nothing, _ String.Empty, _ Me.Category.CategoryName) End Get End Property End Class End Namespace I am mapping the Person class using this mapping file. The many-to-one relation was suggested by Yads in another thread: <id name="Id" column="Id" type="int" unsaved-value="0"> <generator class="identity" /> </id> <property name="CreatedTime" type="DateTime" not-null="true" /> <property name="UpdatedTime" type="DateTime" not-null="true" /> <property name="Deleted" type="Boolean" not-null="true" /> <property name="Firstname" type="String" /> <property name="Lastname" type="String" /> <many-to-one name="Category" column="CategoryId" class="NHibernateWebTest.Database.Category, NHibernateWebTest" /> (I can't get it to show the root node, this forum hides it, I don't know how to escape the html-like tags...) The final important detail is the Load method of the NHibernateEntityManager implementation. (This is in C# as it's in a different project, sorry about that). I simply open a new ISession (ISessionFactory.OpenSession) in the GetSession method and then use that to fill an EntityCollection(Of TEntity) which is just a collection inheriting System.Collections.ObjectModel.Collection(Of T). public virtual EntityCollection< TEntity Load() { using (ISession session = this.GetSession()) { var entities = session .CreateCriteria(typeof (TEntity)) .Add(Expression.Eq("Deleted", false)) .List< TEntity (); return new EntityCollection< TEntity (entities); } } (Again, I can't get it to format the code correctly, it hides the generic type parameters, probably because it reads the angled symbols as a HTML tag..? If you know how to let me do that, let me know!) Now, the idea of this Load method is that I get a fully functional collection of Persons, all their properties set to the correct values (including the Category property, and thus, the CategoryName property should return the correct name). However, it seems that is not the case. When I try to data-bind the result of this Load method to a GridView in ASP.NET, it tells me this: Property accessor 'CategoryName' on object 'NHibernateWebTest.Database.Person' threw the following exception:'Could not initialize proxy - the owning Session was closed.' The exception occurs on the DataBind method call here: public virtual void LoadGrid() { if (this.Grid == null) return; this.Grid.DataSource = this.Manager.Load(); this.Grid.DataBind(); } Well, of course the session is closed, I closed it via the using block. Isn't that the correct approach, should I keep the session open? And for how long? Can I close it after the DataBind method has been run? In each case, I'd really like my Load method to just return a functional collection of items. It seems to me that it is now only getting the Category when it is required (eg, when the GridView wants to read the CategoryName, which wants to read the Category property), but at that time the session is closed. Is that reasoning correct? How do I stop this behavior? Or shouldn't I? And what should I do otherwise? Thanks!

Read the article

No Hibernate Session bound to thread exception

- by Benchik

I have Hibernate 3.6.0.Final and Spring 3.0.0.RELEASE I get "No Hibernate Session bound to thread, and configuration does not allow creation of non-transactional one here" If I add the thread specification back in, I get "saveOrUpdate is not valid without active transaction" Any ideas? The spring-config.xml: <bean id="dataSource" class="org.apache.commons.dbcp.BasicDataSource" destroy-method="close"> <property name="driverClassName" value="org.hsqldb.jdbcDriver"/> <property name="url" value="jdbc:hsqldb:mem:jsf2demo"/> <property name="username" value="sa"/> <property name="password" value=""/> </bean> <bean id="sampleSessionFactory" class="org.springframework.orm.hibernate3.annotation.AnnotationSessionFactoryBean"> <property name="dataSource" ref="sampleDataSource"/> <property name="annotatedClasses"> <list> <value>com.maxheapsize.jsf2demo.Book</value> </list> </property> <property name="hibernateProperties"> <props>  <prop key="hibernate.show_sql">true</prop> <prop key="hibernate.dialect">org.hibernate.dialect.HSQLDialect</prop>  <prop key="hibernate.hbm2ddl.auto">create</prop> </props> </property> </bean> <bean id="sampleDataSource" class="org.springframework.jdbc.datasource.DriverManagerDataSource"> <property name="driverClassName"> <value>org.hsqldb.jdbcDriver</value> </property> <property name="url"> <value> jdbc:hsqldb:file:/spring/db/springdb;SHUTDOWN=true </value> </property> <property name="username" value="sa"/> <property name="password" value=""/> </bean> <bean id="transactionManager" class="org.springframework.orm.hibernate3.HibernateTransactionManager"> <property name="sessionFactory" ref="sampleSessionFactory"/> </bean> <bean id="daoTxTemplate" abstract="true" class="org.springframework.transaction.interceptor.TransactionProxyFactoryBean"> <property name="transactionManager" ref="transactionManager"/> <property name="transactionAttributes"> <props> <prop key="create*"> PROPAGATION_REQUIRED,ISOLATION_READ_COMMITTED </prop> <prop key="get*"> PROPAGATION_REQUIRED,ISOLATION_READ_COMMITTED </prop> </props> </property> </bean> <bean name="openSessionInViewInterceptor" class="org.springframework.orm.hibernate3.support.OpenSessionInViewInterceptor"> <property name="sessionFactory" ref="sampleSessionFactory"/> <property name="singleSession" value="true"/> </bean> <bean id="nameDao" parent="daoTxTemplate"> <property name="target"> <bean class="com.maxheapsize.dao.NameDao"> <property name="sessionFactory" ref="sampleSessionFactory"/> </bean> </property> </bean> and the DAO: public class NameDao { private SessionFactory sessionFactory; public void setSessionFactory(SessionFactory sessionFactory) { this.sessionFactory = sessionFactory; } public SessionFactory getSessionFactory() { return sessionFactory; } @Transactional @SuppressWarnings("unchecked") public List<Name> getAll() { Session session = this.sessionFactory.getCurrentSession(); List<Name> names = (List<Name>)session.createQuery("from Name").list(); return names; } //@Transactional(propagation= Propagation.REQUIRED, readOnly=false) @Transactional public void save(Name name){ Session session = this.sessionFactory.getCurrentSession(); session.saveOrUpdate(name); session.flush(); } }

Read the article

Why would Linux VM in vSphere ESXi 5.5 show dramatically increased disk i/o latency?

- by mhucka

I'm stumped and I hope someone else will recognize the symptoms of this problem. Hardware: new Dell T110 II, dual-core Pentium G860 2.9 GHz, onboard SATA controller, one new 500 GB 7200 RPM cabled hard drive inside the box, other drives inside but not mounted yet. No RAID. Software: fresh CentOS 6.5 virtual machine under VMware ESXi 5.5.0 (build 174 + vSphere Client). 2.5 GB RAM allocated. The disk is how CentOS offered to set it up, namely as a volume inside an LVM Volume Group, except that I skipped having a separate /home and simply have / and /boot. CentOS is patched up, ESXi patched up, latest VMware tools installed in the VM. No users on the system, no services running, no files on the disk but the OS installation. I'm interacting with the VM via the VM virtual console in vSphere Client. Before going further, I wanted to check that I configured things more or less reasonably. I ran the following command as root in a shell on the VM: for i in 1 2 3 4 5 6 7 8 9 10; do dd if=/dev/zero of=/test.img bs=8k count=256k conv=fdatasync done I.e., just repeat the dd command 10 times, which results in printing the transfer rate each time. The results are disturbing. It starts off well: 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 20.451 s, 105 MB/s 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 20.4202 s, 105 MB/s ... but after 7-8 of these, it then prints 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GG) copied, 82.9779 s, 25.9 MB/s 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 84.0396 s, 25.6 MB/s 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 103.42 s, 20.8 MB/s If I wait a significant amount of time, say 30-45 minutes, and run it again, it again goes back to 105 MB/s, and after several rounds (sometimes a few, sometimes 10+), it drops to ~20-25 MB/s again. Plotting the disk latency in vSphere's interface, it shows periods of high disk latency hitting 1.2-1.5 seconds during the times that dd reports the low throughput. (And yes, things get pretty unresponsive while that's happening.) What could be causing this? I'm comfortable that it is not due to the disk failing, because I also had configured two other disks as an additional volume in the same system. At first I thought I did something wrong with that volume, but after commenting the volume out from /etc/fstab and rebooting, and trying the tests on / as shown above, it became clear that the problem is elsewhere. It is probably an ESXi configuration problem, but I'm not very experienced with ESXi. It's probably something stupid, but after trying to figure this out for many hours over multiple days, I can't find the problem, so I hope someone can point me in the right direction. (P.S.: yes, I know this hardware combo won't win any speed awards as a server, and I have reasons for using this low-end hardware and running a single VM, but I think that's besides the point for this question [unless it's actually a hardware problem].) ADDENDUM #1: Reading other answers such as this one made me try adding oflag=direct to dd. However, it makes no difference in the pattern of results: initially the numbers are higher for many rounds, then they drop to 20-25 MB/s. (The initial absolute numbers are in the 50 MB/s range.) ADDENDUM #2: Adding sync ; echo 3 > /proc/sys/vm/drop_caches into the loop does not make a difference at all. ADDENDUM #3: To take out further variables, I now run dd such that the file it creates is larger than the amount of RAM on the system. The new command is dd if=/dev/zero of=/test.img bs=16k count=256k conv=fdatasync oflag=direct. Initial throughput numbers with this version of the command are ~50 MB/s. They drop to 20-25 MB/s when things go south. ADDENDUM #4: Here is the output of iostat -d -m -x 1 running in another terminal window while performance is "good" and then again when it's "bad". (While this is going on, I'm running dd if=/dev/zero of=/test.img bs=16k count=256k conv=fdatasync oflag=direct.) First, when things are "good", it shows this: When things go "bad", iostat -d -m -x 1 shows this:

Read the article

Problems with Asynchronous UDP Sockets

- by ihatenetworkcoding

Hi, I'm struggling a bit with socket programming (something I'm not at all familiar with) and I can't find anything which helps from google or MSDN (awful). Apologies for the length of this. Basically I have an existing service which recieves and responds to requests over UDP. I can't change this at all. I also have a client within my webapp which dispatches and listens for responses to that service. The existing client I've been given is a singleton which creates a socket and an array of response slots, and then creates a background thread with an infinite looping method that makes "sock.Receive()" calls and pushes the data received into the slot array. All kinds of things about this seem wrong to me and the infinite thread breaks my unit testing so I'm trying to replace this service with one which makes it's it's send/receives asynchronously instead. Point 1: Is this the right approach? I want a non-blocking, scalable, thread-safe service. My first attempt is roughly like this, which sort of worked but the data I got back was always shorter than expected (i.e. the buffer did not have the number of bytes requested) and seemed to throw exceptions when processed. private Socket MyPreConfiguredSocket; public object Query() { //build a request this.MyPreConfiguredSocket.SendTo(MYREQUEST, packet.Length, SocketFlags.Multicast, this._target); IAsyncResult h = this._sock.BeginReceiveFrom(response, 0, BUFFER_SIZE, SocketFlags.None, ref this._target, new AsyncCallback(ARecieve), this._sock); if (!h.AsyncWaitHandle.WaitOne(TIMEOUT)) { throw new Exception("Timed out"); } //process response data (always shortened) } private void ARecieve (IAsyncResult result) { int bytesreceived = (result as Socket).EndReceiveFrom(result, ref this._target); } My second attempt was based on more google trawling and this recursive pattern I frequently saw, but this version always times out! It never gets to ARecieve. public object Query() { //build a request this.MyPreConfiguredSocket.SendTo(MYREQUEST, packet.Length, SocketFlags.Multicast, this._target); State s = new State(this.MyPreConfiguredSocket); this.MyPreConfiguredSocket.BeginReceiveFrom(s.Buffer, 0, BUFFER_SIZE, SocketFlags.None, ref this._target, new AsyncCallback(ARecieve), s); if (!s.Flag.WaitOne(10000)) { throw new Exception("Timed out"); } //always thrown //process response data } private void ARecieve (IAsyncResult result) { //never gets here! State s = (result as State); int bytesreceived = s.Sock.EndReceiveFrom(result, ref this._target); if (bytesreceived > 0) { s.Received += bytesreceived; this._sock.BeginReceiveFrom(s.Buffer, s.Received, BUFFER_SIZE, SocketFlags.None, ref this._target, new AsyncCallback(ARecieve), s); } else { s.Flag.Set(); } } private class State { public State(Socket sock) { this._sock = sock; this._buffer = new byte[BUFFER_SIZE]; this._buffer.Initialize(); } public Socket Sock; public byte[] Buffer; public ManualResetEvent Flag = new ManualResetEvent(false); public int Received = 0; } Point 2: So clearly I'm getting something quite wrong. Point 3: I'm not sure if I'm going about this right. How does the data coming from the remote service even get to the right listening thread? Do I need to create a socket per request? Out of my comfort zone here. Need help.

Read the article

How to reserve public API to internal usage in .NET?

- by mark

Dear ladies and sirs. Let me first present the case, which will explain my question. This is going to be a bit long, so I apologize in advance :-). I have objects and collections, which should support the Merge API (it is my custom API, the signature of which is immaterial for this question). This API must be internal, meaning only my framework should be allowed to invoke it. However, derived types should be able to override the basic implementation. The natural way to implement this pattern as I see it, is this: The Merge API is declared as part of some internal interface, let us say IMergeable. Because the interface is internal, derived types would not be able to implement it directly. Rather they must inherit it from a common base type. So, a common base type is introduced, which would implement the IMergeable interface explicitly, where the interface methods delegate to respective protected virtual methods, providing the default implementation. This way the API is only callable by my framework, but derived types may override the default implementation. The following code snippet demonstrates the concept: internal interface IMergeable { void Merge(object obj); } public class BaseFrameworkObject : IMergeable { protected virtual void Merge(object obj) { // The default implementation. } void IMergeable.Merge(object obj) { Merge(obj); } } public class SomeThirdPartyObject : BaseFrameworkObject { protected override void Merge(object obj) { // A derived type implementation. } } All is fine, provided a single common base type suffices, which is usually true for non collection types. The thing is that collections must be mergeable as well. Collections do not play nicely with the presented concept, because developers do not develop collections from the scratch. There are predefined implementations - observable, filtered, compound, read-only, remove-only, ordered, god-knows-what, ... They may be developed from scratch in-house, but once finished, they serve wide range of products and should never be tailored to some specific product. Which means, that either: they do not implement the IMergeable interface at all, because it is internal to some product the scope of the IMergeable interface is raised to public and the API becomes open and callable by all. Let us refer to these collections as standard collections. Anyway, the first option screws my framework, because now each possible standard collection type has to be paired with the respective framework version, augmenting the standard with the IMergeable interface implementation - this is so bad, I am not even considering it. The second option breaks the framework as well, because the IMergeable interface should be internal for a reason (whatever it is) and now this interface has to open to all. So what to do? My solution is this. make IMergeable public API, but add an extra parameter to the Merge method, I call it a security token. The interface implementation may check that the token references some internal object, which is never exposed to the outside. If this is the case, then the method was called from within the framework, otherwise - some outside API consumer attempted to invoke it and so the implementation can blow up with a SecurityException. Here is the modified code snippet demonstrating this concept: internal static class InternalApi { internal static readonly object Token = new object(); } public interface IMergeable { void Merge(object obj, object token); } public class BaseFrameworkObject : IMergeable { protected virtual void Merge(object obj) { // The default implementation. } public void Merge(object obj, object token) { if (!object.ReferenceEquals(token, InternalApi.Token)) { throw new SecurityException("bla bla bla"); } Merge(obj); } } public class SomeThirdPartyObject : BaseFrameworkObject { protected override void Merge(object obj) { // A derived type implementation. } } Of course, this is less explicit than having an internally scoped interface and the check is moved from the compile time to run time, yet this is the best I could come up with. Now, I have a gut feeling that there is a better way to solve the problem I have presented. I do not know, may be using some standard Code Access Security features? I have only vague understanding of it, but can LinkDemand attribute be somehow related to it? Anyway, I would like to hear other opinions. Thanks.

Read the article

C++ Unions bit fields task

- by learningtolive

Can somebody clear me out why would I use union and with what purpose the same address for the cin'ed variable and bit field (task from the Schildts C++ book)? In other words why would I use union for : char ch; struct byte bit; // Display the ASCII code in binary for characters. #include <iostream> #include <conio.h> using namespace std; // a bit field that will be decoded struct byte { unsigned a : 1; unsigned b : 1; unsigned c : 1; unsigned d : 1; unsigned e : 1; unsigned f : 1; unsigned g : 1; unsigned h : 1; }; union bits { char ch; struct byte bit; } ascii ; void disp_bits(bits b); int main() { do { cin >> ascii.ch; cout << ": "; disp_bits(ascii); } while(ascii.ch!='q'); // quit if q typed return 0; } // Display the bit pattern for each character. void disp_bits(bits b) { if(b.bit.h) cout << "1 "; else cout << "0 "; if(b.bit.g) cout << "1 "; else cout << "0 "; if(b.bit.f) cout << "1 "; else cout << "0 "; if(b.bit.e) cout << "1 "; else cout << "0 "; if(b.bit.d) cout << "1 "; else cout << "0 "; if(b.bit.c) cout << "1 "; else cout << "0 "; if(b.bit.b) cout << "1 "; else cout << "0 "; if(b.bit.a) cout << "1 "; else cout << "0 "; cout << "\n"; }

Read the article

Java AD Authentication across Trusted Domains

- by benjiisnotcool

I am trying to implement Active Directory authentication in Java which will be ran from a Linux machine. Our AD set-up will consist of multiple servers that share trust relationships with one another so for our test environment we have two domain controllers: test1.ad1.foo.com who trusts test2.ad2.bar.com. Using the code below I can successfully authenticate a user from test1 but not on test2: public class ADDetailsProvider implements ResultSetProvider { private String domain; private String user; private String password; public ADDetailsProvider(String user, String password) { //extract domain name if (user.contains("\\")) { this.user = user.substring((user.lastIndexOf("\\") + 1), user.length()); this.domain = user.substring(0, user.lastIndexOf("\\")); } else { this.user = user; this.domain = ""; } this.password = password; } /* Test from the command line */ public static void main (String[] argv) throws SQLException { ResultSetProvider res = processADLogin(argv[0], argv[1]); ResultSet results = null; res.assignRowValues(results, 0); System.out.println(argv[0] + " " + argv[1]); } public boolean assignRowValues(ResultSet results, int currentRow) throws SQLException { // Only want a single row if (currentRow >= 1) return false; try { ADAuthenticator adAuth = new ADAuthenticator(); LdapContext ldapCtx = adAuth.authenticate(this.domain, this.user, this.password); NamingEnumeration userDetails = adAuth.getUserDetails(ldapCtx, this.user); // Fill the result set (throws SQLException). while (userDetails.hasMoreElements()) { Attribute attr = (Attribute)userDetails.next(); results.updateString(attr.getID(), attr.get().toString()); } results.updateInt("authenticated", 1); return true; } catch (FileNotFoundException fnf) { Logger.getAnonymousLogger().log(Level.WARNING, "Caught File Not Found Exception trying to read cris_authentication.properties"); results.updateInt("authenticated", 0); return false; } catch (IOException ioe) { Logger.getAnonymousLogger().log(Level.WARNING, "Caught IO Excpetion processing login"); results.updateInt("authenticated", 0); return false; } catch (AuthenticationException aex) { Logger.getAnonymousLogger().log(Level.WARNING, "Caught Authentication Exception attempting to bind to LDAP for [{0}]", this.user); results.updateInt("authenticated", 0); return true; } catch (NamingException ne) { Logger.getAnonymousLogger().log(Level.WARNING, "Caught Naming Exception performing user search or LDAP bind for [{0}]", this.user); results.updateInt("authenticated", 0); return true; } } public void close() { // nothing needed here } /** * This method is called via a Postgres function binding to access the * functionality provided by this class. */ public static ResultSetProvider processADLogin(String user, String password) { return new ADDetailsProvider(user, password); } } public class ADAuthenticator { public ADAuthenticator() throws FileNotFoundException, IOException { Properties props = new Properties(); InputStream inStream = this.getClass().getClassLoader(). getResourceAsStream("com/bar/foo/ad/authentication.properties"); props.load(inStream); this.domain = props.getProperty("ldap.domain"); inStream.close(); } public LdapContext authenticate(String domain, String user, String pass) throws AuthenticationException, NamingException, IOException { Hashtable env = new Hashtable(); this.domain = domain; env.put(Context.INITIAL_CONTEXT_FACTORY, com.sun.jndi.ldap.LdapCtxFactory); env.put(Context.PROVIDER_URL, "ldap://" + test1.ad1.foo.com + ":" + 3268); env.put(Context.SECURITY_AUTHENTICATION, simple); env.put(Context.REFERRAL, follow); env.put(Context.SECURITY_PRINCIPAL, (domain + "\\" + user)); env.put(Context.SECURITY_CREDENTIALS, pass); // Bind using specified username and password LdapContext ldapCtx = new InitialLdapContext(env, null); return ldapCtx; } public NamingEnumeration getUserDetails(LdapContext ldapCtx, String user) throws NamingException { // List of attributes to return from LDAP query String returnAttributes[] = {"ou", "sAMAccountName", "givenName", "sn", "memberOf"}; //Create the search controls SearchControls searchCtls = new SearchControls(); searchCtls.setReturningAttributes(returnAttributes); //Specify the search scope searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE); // Specify the user to search against String searchFilter = "(&(objectClass=*)(sAMAccountName=" + user + "))"; //Perform the search NamingEnumeration answer = ldapCtx.search("dc=dev4,dc=dbt,dc=ukhealth,dc=local", searchFilter, searchCtls); // Only care about the first tuple Attributes userAttributes = ((SearchResult)answer.next()).getAttributes(); if (userAttributes.size() <= 0) throw new NamingException(); return (NamingEnumeration) userAttributes.getAll(); } From what I understand of the trust relationship, if trust1 receives a login attempt for a user in trust2, then it should forward the login attempt on to it and it works this out from the user's domain name. Is this correct or am I missing something or is this not possible using the method above? --EDIT-- The stack trace from the LDAP bind is {java.naming.provider.url=ldap://test1.ad1.foo.com:3268, java.naming.factory.initial=com.sun.jndi.ldap.LdapCtxFactory, java.naming.security.authentication=simple, java.naming.referral=follow} 30-Oct-2012 13:16:02 ADDetailsProvider assignRowValues WARNING: Caught Authentication Exception attempting to bind to LDAP for [trusttest] Auth error is [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db0]

Read the article

bulls and cows game -- programming algorithm(python)

- by IcyFlame

This is a simulation of the game Cows and Bulls with three digit numbers I am trying to get the number of cows and bulls between two numbers. One of which is generated by the computer and the other is guessed by the user. I have parsed the two numbers I have so that now I have two lists with three elements each and each element is one of the digits in the number. So: 237 will give the list [2,3,7]. And I make sure that the relative indices are maintained.the general pattern is:(hundreds, tens, units). And these two lists are stored in the two lists: machine and person. ALGORITHM 1 So, I wrote the following code, The most intuitive algorithm: cows and bulls are initialized to 0 before the start of this loop. for x in person: if x in machine: if machine.index(x) == person.index(x): bulls += 1 print x,' in correct place' else: print x,' in wrong place' cows += 1 And I started testing this with different type of numbers guessed by the computer. Quite randomly, I decided on 277. And I guessed 447. Here, I got the first clue that this algorithm may not work. I got 1 cow and 0 bulls. Whereas I should have got 1 bull and 1 cow. This is a table of outputs with the first algorithm: Guess Output Expected Output 447 0 bull, 1 cow 1 bull, 1 cow 477 2 bulls, 0 cows 2 bulls, 0 cows 777 0 bulls, 3 cows 2 bulls, 0 cows So obviously this algorithm was not working when there are repeated digits in the number randomly selected by the computer. I tried to understand why these errors are taking place, But I could not. I have tried a lot but I just could not see any mistake in the algorithm(probably because I wrote it!) ALGORITHM 2 On thinking about this for a few days I tried this: cows and bulls are initialized to 0 before the start of this loop. for x in range(3): for y in range(3): if x == y and machine[x] == person[y]: bulls += 1 if not (x == y) and machine[x] == person[y]: cows += 1 I was more hopeful about this one. But when I tested this, this is what I got: Guess Output Expected Output 447 1 bull, 1 cow 1 bull, 1 cow 477 2 bulls, 2 cows 2 bulls, 0 cows 777 2 bulls, 4 cows 2 bulls, 0 cows The mistake I am making is quite clear here, I understood that the numbers were being counted again and again. i.e.: 277 versus 477 When you count for bulls then the 2 bulls come up and thats alright. But when you count for cows: the 7 in 277 at units place is matched with the 7 in 477 in tens place and thus a cow is generated. the 7 in 277 at tens place is matched with the 7 in 477 in units place and thus a cow is generated.' Here the matching is exactly right as I have written the code as per that. But this is not what I want. And I have no idea whatsoever on what to do after this. Furthermore... I would like to stress that both the algorithms work perfectly, if there are no repeated digits in the number selected by the computer. Please help me with this issue. P.S.: I have been thinking about this for over a week, But I could not post a question earlier as my account was blocked(from asking questions) because I asked a foolish question. And did not delete it even though I got 2 downvotes immediately after posting the question.

Read the article

Silverlight Commands Hacks: Passing EventArgs as CommandParameter to DelegateCommand triggered by Ev

- by brainbox

Today I've tried to find a way how to pass EventArgs as CommandParameter to DelegateCommand triggered by EventTrigger. By reverse engineering of default InvokeCommandAction I find that blend team just ignores event args.To resolve this issue I have created my own action for triggering delegate commands.public sealed class InvokeDelegateCommandAction : TriggerAction<DependencyObject>{ /// <summary> /// /// </summary> public static readonly DependencyProperty CommandParameterProperty = DependencyProperty.Register("CommandParameter", typeof(object), typeof(InvokeDelegateCommandAction), null); /// <summary> /// /// </summary> public static readonly DependencyProperty CommandProperty = DependencyProperty.Register( "Command", typeof(ICommand), typeof(InvokeDelegateCommandAction), null); /// <summary> /// /// </summary> public static readonly DependencyProperty InvokeParameterProperty = DependencyProperty.Register( "InvokeParameter", typeof(object), typeof(InvokeDelegateCommandAction), null); private string commandName; /// <summary> /// /// </summary> public object InvokeParameter { get { return this.GetValue(InvokeParameterProperty); } set { this.SetValue(InvokeParameterProperty, value); } } /// <summary> /// /// </summary> public ICommand Command { get { return (ICommand)this.GetValue(CommandProperty); } set { this.SetValue(CommandProperty, value); } } /// <summary> /// /// </summary> public string CommandName { get { return this.commandName; } set { if (this.CommandName != value) { this.commandName = value; } } } /// <summary> /// /// </summary> public object CommandParameter { get { return this.GetValue(CommandParameterProperty); } set { this.SetValue(CommandParameterProperty, value); } } /// <summary> /// /// </summary> /// <param name="parameter"></param> protected override void Invoke(object parameter) { this.InvokeParameter = parameter; if (this.AssociatedObject != null) { ICommand command = this.ResolveCommand(); if ((command != null) && command.CanExecute(this.CommandParameter)) { command.Execute(this.CommandParameter); } } } private ICommand ResolveCommand() { ICommand command = null; if (this.Command != null) { return this.Command; } var frameworkElement = this.AssociatedObject as FrameworkElement; if (frameworkElement != null) { object dataContext = frameworkElement.DataContext; if (dataContext != null) { PropertyInfo commandPropertyInfo = dataContext .GetType() .GetProperties(BindingFlags.Public | BindingFlags.Instance) .FirstOrDefault( p => typeof(ICommand).IsAssignableFrom(p.PropertyType) && string.Equals(p.Name, this.CommandName, StringComparison.Ordinal) ); if (commandPropertyInfo != null) { command = (ICommand)commandPropertyInfo.GetValue(dataContext, null); } } } return command; }}Example:<ComboBox> <ComboBoxItem Content="Foo option 1" /> <ComboBoxItem Content="Foo option 2" /> <ComboBoxItem Content="Foo option 3" /> <Interactivity:Interaction.Triggers> <Interactivity:EventTrigger EventName="SelectionChanged" > <Presentation:InvokeDelegateCommandAction Command="{Binding SubmitFormCommand}" CommandParameter="{Binding RelativeSource={RelativeSource Self}, Path=InvokeParameter}" /> </Interactivity:EventTrigger> </Interactivity:Interaction.Triggers> </ComboBox>BTW: InvokeCommanAction CommandName property are trying to find command in properties of view. It very strange, because in MVVM pattern command should be in viewmodel supplied to datacontext.

Read the article

ASP.Net MVC 2 Auto Complete Textbox With Custom View Model Attribute & EditorTemplate

- by SeanMcAlinden

In this post I’m going to show how to create a generic, ajax driven Auto Complete text box using the new MVC 2 Templates and the jQuery UI library. The template will be automatically displayed when a property is decorated with a custom attribute within the view model. The AutoComplete text box in action will look like the following: The first thing to do is to do is visit my previous blog post to put the custom model metadata provider in place, this is necessary when using custom attributes on the view model. http://weblogs.asp.net/seanmcalinden/archive/2010/06/11/custom-asp-net-mvc-2-modelmetadataprovider-for-using-custom-view-model-attributes.aspx Once this is in place, make sure you visit the jQuery UI and download the latest stable release – in this example I’m using version 1.8.2. You can download it here. Add the jQuery scripts and css theme to your project and add references to them in your master page. Should look something like the following: Site.Master <head runat="server"> <title><asp:ContentPlaceHolder ID="TitleContent" runat="server" /></title> <link href="../../Content/Site.css" rel="stylesheet" type="text/css" /> <link href="../../css/ui-lightness/jquery-ui-1.8.2.custom.css" rel="stylesheet" type="text/css" /> <script src="../../Scripts/jquery-1.4.2.min.js" type="text/javascript"></script> <script src="../../Scripts/jquery-ui-1.8.2.custom.min.js" type="text/javascript"></script> </head> Once this is place we can get started. Creating the AutoComplete Custom Attribute The auto complete attribute will derive from the abstract MetadataAttribute created in my previous post. It will look like the following: AutoCompleteAttribute using System.Collections.Generic; using System.Web.Mvc; using System.Web.Routing; namespace Mvc2Templates.Attributes { public class AutoCompleteAttribute : MetadataAttribute { public RouteValueDictionary RouteValueDictionary; public AutoCompleteAttribute(string controller, string action, string parameterName) { this.RouteValueDictionary = new RouteValueDictionary(); this.RouteValueDictionary.Add("Controller", controller); this.RouteValueDictionary.Add("Action", action); this.RouteValueDictionary.Add(parameterName, string.Empty); } public override void Process(ModelMetadata modelMetaData) { modelMetaData.AdditionalValues.Add("AutoCompleteUrlData", this.RouteValueDictionary); modelMetaData.TemplateHint = "AutoComplete"; } } } As you can see, the constructor takes in strings for the controller, action and parameter name. The parameter name will be used for passing the search text within the auto complete text box. The constructor then creates a new RouteValueDictionary which we will use later to construct the url for getting the auto complete results via ajax. The main interesting method is the method override called Process. With the process method, the route value dictionary is added to the modelMetaData AdditionalValues collection. The TemplateHint is also set to AutoComplete, this means that when the view model is parsed for display, the MVC 2 framework will look for a view user control template called AutoComplete, if it finds one, it uses that template to display the property. The View Model To show you how the attribute will look, this is the view model I have used in my example which can be downloaded at the end of this post. View Model using System.ComponentModel; using Mvc2Templates.Attributes; namespace Mvc2Templates.Models { public class TemplateDemoViewModel { [AutoComplete("Home", "AutoCompleteResult", "searchText")] [DisplayName("European Country Search")] public string SearchText { get; set; } } } As you can see, the auto complete attribute is called with the controller name, action name and the name of the action parameter that the search text will be passed into. The AutoComplete Template Now all of this is in place, it’s time to create the AutoComplete template. Create a ViewUserControl called AutoComplete.ascx at the following location within your application – Views/Shared/EditorTemplates/AutoComplete.ascx Add the following code: AutoComplete.ascx <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %> <% var propertyName = ViewData.ModelMetadata.PropertyName; var propertyValue = ViewData.ModelMetadata.Model; var id = Guid.NewGuid().ToString(); RouteValueDictionary urlData = (RouteValueDictionary)ViewData.ModelMetadata.AdditionalValues.Where(x => x.Key == "AutoCompleteUrlData").Single().Value; var url = Mvc2Templates.Views.Shared.Helpers.RouteHelper.GetUrl(this.ViewContext.RequestContext, urlData); %> <input type="text" name="<%= propertyName %>" value="<%= propertyValue %>" id="<%= id %>" class="autoComplete" /> <script type="text/javascript"> $(function () { $("#<%= id %>").autocomplete({ source: function (request, response) { $.ajax({ url: "<%= url %>" + request.term, dataType: "json", success: function (data) { response(data); } }); }, minLength: 2 }); }); </script> There is a lot going on in here but when you break it down it’s quite simple. Firstly, the property name and property value are retrieved through the model meta data. These are required to ensure that the text box input has the correct name and data to allow for model binding. If you look at line 14 you can see them being used in the text box input creation. The interesting bit is on line 8 and 9, this is the code to retrieve the route value dictionary we added into the model metada via the custom attribute. Line 11 is used to create the url, in order to do this I created a quick helper class which looks like the code below titled RouteHelper. The last bit of script is the code to initialise the jQuery UI AutoComplete control with the correct url for calling back to our controller action. RouteHelper using System.Web.Mvc; using System.Web.Routing; namespace Mvc2Templates.Views.Shared.Helpers { public static class RouteHelper { const string Controller = "Controller"; const string Action = "Action"; const string ReplaceFormatString = "REPLACE{0}"; public static string GetUrl(RequestContext requestContext, RouteValueDictionary routeValueDictionary) { RouteValueDictionary urlData = new RouteValueDictionary(); UrlHelper urlHelper = new UrlHelper(requestContext); int i = 0; foreach(var item in routeValueDictionary) { if (item.Value == string.Empty) { i++; urlData.Add(item.Key, string.Format(ReplaceFormatString, i.ToString())); } else { urlData.Add(item.Key, item.Value); } } var url = urlHelper.RouteUrl(urlData); for (int index = 1; index <= i; index++) { url = url.Replace(string.Format(ReplaceFormatString, index.ToString()), string.Empty); } return url; } } } See it in action All you need to do to see it in action is pass a view model from your controller with the new AutoComplete attribute attached and call the following within your view: <%= this.Html.EditorForModel() %> NOTE: The jQuery UI auto complete control expects a JSON string returned from your controller action method… as you can’t use the JsonResult to perform GET requests, use a normal action result, convert your data into json and return it as a string via a ContentResult. If you download the solution it will be very clear how to handle the controller and action for this demo. The full source code for this post can be downloaded here. It has been developed using MVC 2 and Visual Studio 2010. As always, I hope this has been interesting/useful. Kind Regards, Sean McAlinden.

Read the article

Version Assemblies with TFS 2010 Continuous Integration

- by Steve Michelotti

When I first heard that TFS 2010 had moved to Workflow Foundation for Team Build, I was *extremely* skeptical. I’ve loved MSBuild and didn’t quite understand the reasons for this change. In fact, given that I’ve been exclusively using Cruise Control for Continuous Integration (CI) for the last 5+ years of my career, I was skeptical of TFS for CI in general. However, after going through the learning process for TFS 2010 recently, I’m starting to become a believer. I’m also starting to see some of the benefits with Workflow Foundation for the overall processing because it gives you constructs not available in MSBuild such as parallel tasks, better control flow constructs, and a slightly better customization story. The first customization I had to make to the build process was to version the assemblies of my solution. This is not new. In fact, I’d recommend reading Mike Fourie’s well known post on Versioning Code in TFS before you get started. This post describes several foundational aspects of versioning assemblies regardless of your version of TFS. The main points are: 1) don’t use source control operations for your version file, 2) use a schema like <Major>.<Minor>.<IncrementalNumber>.0, and 3) do not keep AssemblyVersion and AssemblyFileVersion in sync. To do this in TFS 2010, the best post I’ve found has been Jim Lamb’s post of building a custom TFS 2010 workflow activity. Overall, this post is excellent but the primary issue I have with it is that the assembly version numbers produced are based in a date and look like this: “2010.5.15.1”. This is definitely not what I want. I want to be able to communicate to the developers and stakeholders that we are producing the “1.1 release” or “1.2 release” – which would have an assembly version number of “1.1.317.0” for example. In this post, I’ll walk through the process of customizing the assembly version number based on this method – customizing the concepts in Lamb’s post to suit my needs. I’ll also be combining this with the concepts of Fourie’s post – particularly with regards to the standards around how to version the assemblies. The first thing I’ll do is add a file called SolutionAssemblyVersionInfo.cs to the root of my solution that looks like this: 1: using System; 2: using System.Reflection; 3: [assembly: AssemblyVersion("1.1.0.0")] 4: [assembly: AssemblyFileVersion("1.1.0.0")] I’ll then add that file as a Visual Studio link file to each project in my solution by right-clicking the project, “Add – Existing Item…” then when I click the SolutionAssemblyVersionInfo.cs file, making sure I “Add As Link”: Now the Solution Explorer will show our file. We can see that it’s a “link” file because of the black arrow in the icon within all our projects. Of course you’ll need to remove the AssemblyVersion and AssemblyFileVersion attributes from the AssemblyInfo.cs files to avoid the duplicate attributes since they now leave in the SolutionAssemblyVersionInfo.cs file. This is an extremely common technique so that all the projects in our solution can be versioned as a unit. At this point, we’re ready to write our custom activity. The primary consideration is that I want the developer and/or tech lead to be able to easily be in control of the Major.Minor and then I want the CI process to add the third number with a unique incremental number. We’ll leave the fourth position always “0” for now – it’s held in reserve in case the day ever comes where we need to do an emergency patch to Production based on a branched version. Writing the Custom Workflow Activity Similar to Lamb’s post, I’m going to write two custom workflow activities. The “outer” activity (a xaml activity) will be pretty straight forward. It will check if the solution version file exists in the solution root and, if so, delegate the replacement of version to the AssemblyVersionInfo activity which is a CodeActivity highlighted in red below: Notice that the arguments of this activity are the “solutionVersionFile” and “tfsBuildNumber” which will be passed in. The tfsBuildNumber passed in will look something like this: “CI_MyApplication.4” and we’ll need to grab the “4” (i.e., the incremental revision number) and put that in the third position. Then we’ll need to honor whatever was specified for Major.Minor in the SolutionAssemblyVersionInfo.cs file. For example, if the SolutionAssemblyVersionInfo.cs file had “1.1.0.0” for the AssemblyVersion (as shown in the first code block near the beginning of this post), then we want to resulting file to have “1.1.4.0”. Before we do anything, let’s put together a unit test for all this so we can know if we get it right: 1: [TestMethod] 2: public void Assembly_version_should_be_parsed_correctly_from_build_name() 3: { 4: // arrange 5: const string versionFile = "SolutionAssemblyVersionInfo.cs"; 6: WriteTestVersionFile(versionFile); 7: var activity = new VersionAssemblies(); 8: var arguments = new Dictionary<string, object> { 9: { "tfsBuildNumber", "CI_MyApplication.4"}, 10: { "solutionVersionFile", versionFile} 11: }; 12: 13: // act 14: var result = WorkflowInvoker.Invoke(activity, arguments); 15: 16: // assert 17: Assert.AreEqual("1.2.4.0", (string)result["newAssemblyFileVersion"]); 18: var lines = File.ReadAllLines(versionFile); 19: Assert.IsTrue(lines.Contains("[assembly: AssemblyVersion(\"1.2.0.0\")]")); 20: Assert.IsTrue(lines.Contains("[assembly: AssemblyFileVersion(\"1.2.4.0\")]")); 21: } 22: 23: private void WriteTestVersionFile(string versionFile) 24: { 25: var fileContents = "using System.Reflection;\n" + 26: "[assembly: AssemblyVersion(\"1.2.0.0\")]\n" + 27: "[assembly: AssemblyFileVersion(\"1.2.0.0\")]"; 28: File.WriteAllText(versionFile, fileContents); 29: } At this point, the code for our AssemblyVersion activity is pretty straight forward: 1: [BuildActivity(HostEnvironmentOption.Agent)] 2: public class AssemblyVersionInfo : CodeActivity 3: { 4: [RequiredArgument] 5: public InArgument<string> FileName { get; set; } 6: 7: [RequiredArgument] 8: public InArgument<string> TfsBuildNumber { get; set; } 9: 10: public OutArgument<string> NewAssemblyFileVersion { get; set; } 11: 12: protected override void Execute(CodeActivityContext context) 13: { 14: var solutionVersionFile = this.FileName.Get(context); 15: 16: // Ensure that the file is writeable 17: var fileAttributes = File.GetAttributes(solutionVersionFile); 18: File.SetAttributes(solutionVersionFile, fileAttributes & ~FileAttributes.ReadOnly); 19: 20: // Prepare assembly versions 21: var majorMinor = GetAssemblyMajorMinorVersionBasedOnExisting(solutionVersionFile); 22: var newBuildNumber = GetNewBuildNumber(this.TfsBuildNumber.Get(context)); 23: var newAssemblyVersion = string.Format("{0}.{1}.0.0", majorMinor.Item1, majorMinor.Item2); 24: var newAssemblyFileVersion = string.Format("{0}.{1}.{2}.0", majorMinor.Item1, majorMinor.Item2, newBuildNumber); 25: this.NewAssemblyFileVersion.Set(context, newAssemblyFileVersion); 26: 27: // Perform the actual replacement 28: var contents = this.GetFileContents(newAssemblyVersion, newAssemblyFileVersion); 29: File.WriteAllText(solutionVersionFile, contents); 30: 31: // Restore the file's original attributes 32: File.SetAttributes(solutionVersionFile, fileAttributes); 33: } 34: 35: #region Private Methods 36: 37: private string GetFileContents(string newAssemblyVersion, string newAssemblyFileVersion) 38: { 39: var cs = new StringBuilder(); 40: cs.AppendLine("using System.Reflection;"); 41: cs.AppendFormat("[assembly: AssemblyVersion(\"{0}\")]", newAssemblyVersion); 42: cs.AppendLine(); 43: cs.AppendFormat("[assembly: AssemblyFileVersion(\"{0}\")]", newAssemblyFileVersion); 44: return cs.ToString(); 45: } 46: 47: private Tuple<string, string> GetAssemblyMajorMinorVersionBasedOnExisting(string filePath) 48: { 49: var lines = File.ReadAllLines(filePath); 50: var versionLine = lines.Where(x => x.Contains("AssemblyVersion")).FirstOrDefault(); 51: 52: if (versionLine == null) 53: { 54: throw new InvalidOperationException("File does not contain [assembly: AssemblyVersion] attribute"); 55: } 56: 57: return ExtractMajorMinor(versionLine); 58: } 59: 60: private static Tuple<string, string> ExtractMajorMinor(string versionLine) 61: { 62: var firstQuote = versionLine.IndexOf('"') + 1; 63: var secondQuote = versionLine.IndexOf('"', firstQuote); 64: var version = versionLine.Substring(firstQuote, secondQuote - firstQuote); 65: var versionParts = version.Split('.'); 66: return new Tuple<string, string>(versionParts[0], versionParts[1]); 67: } 68: 69: private string GetNewBuildNumber(string buildName) 70: { 71: return buildName.Substring(buildName.LastIndexOf(".") + 1); 72: } 73: 74: #endregion 75: } At this point the final step is to incorporate this activity into the overall build template. Make a copy of the DefaultTempate.xaml – we’ll call it DefaultTemplateWithVersioning.xaml. Before the build and labeling happens, drag the VersionAssemblies activity in. Then set the LabelName variable to “BuildDetail.BuildDefinition.Name + "-" + newAssemblyFileVersion since the newAssemblyFileVersion was produced by our activity. Configuring CI Once you add your solution to source control, you can configure CI with the build definition window as shown here. The main difference is that we’ll change the Process tab to reflect a different build number format and choose our custom build process file: When the build completes, we’ll see the name of our project with the unique revision number: If we look at the detailed build log for the latest build, we’ll see the label being created with our custom task: We can now look at the history labels in TFS and see the project name with the labels (the Assignment activity I added to the workflow): Finally, if we look at the physical assemblies that are produced, we can right-click on any assembly in Windows Explorer and see the assembly version in its properties: Full Traceability We now have full traceability for our code. There will never be a question of what code was deployed to Production. You can always see the assembly version in the properties of the physical assembly. That can be traced back to a label in TFS where the unique revision number matches. The label in TFS gives you the complete snapshot of the code in your source control repository at the time the code was built. This type of process for full traceability has been used for many years for CI – in fact, I’ve done similar things with CCNet and SVN for quite some time. This is simply the TFS implementation of that pattern. The new features that TFS 2010 give you to make these types of customizations in your build process are quite easy once you get over the initial curve.

Read the article

September 2011 Release of the Ajax Control Toolkit

- by Stephen Walther

I’m happy to announce the release of the September 2011 Ajax Control Toolkit. This release has several important new features including: Date ranges – When using the Calendar extender, you can specify a start and end date and a user can pick only those dates which fall within the specified range. This was the fourth top-voted feature request for the Ajax Control Toolkit at CodePlex. Twitter Control – You can use the new Twitter control to display recent tweets associated with a particular Twitter user or tweets which match a search query. Gravatar Control – You can use the new Gravatar control to display a unique image for each user of your website. Users can upload custom images to the Gravatar.com website or the Gravatar control can display a unique, auto-generated, image for a user. You can download this release this very minute by visiting CodePlex: http://AjaxControlToolkit.CodePlex.com Alternatively, you can execute the following command from the Visual Studio NuGet console: Improvements to the Ajax Control Toolkit Calendar Control The Ajax Control Toolkit Calendar extender control is one of the most heavily used controls from the Ajax Control Toolkit. The developers on the Superexpert team spent the last sprint focusing on improving this control. There are three important changes that we made to the Calendar control: we added support for date ranges, we added support for highlighting today’s date, and we made fixes to several bugs related to time zones and daylight savings. Using Calendar Date Ranges One of the top-voted feature requests for the Ajax Control Toolkit was a request to add support for date ranges to the Calendar control (this was the fourth most voted feature request at CodePlex). With the latest release of the Ajax Control Toolkit, the Calendar extender now supports date ranges. For example, the following page illustrates how you can create a popup calendar which allows a user only to pick dates between March 2, 2009 and May 16, 2009. <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="CalendarDateRange.aspx.cs" Inherits="WebApplication1.CalendarDateRange" %> <%@ Register TagPrefix="asp" Namespace="AjaxControlToolkit" Assembly="AjaxControlToolkit" %> <html> <head runat="server"> <title>Calendar Date Range</title> </head> <body> <form id="form1" runat="server"> <asp:ToolkitScriptManager ID="tsm" runat="server" /> <asp:TextBox ID="txtHotelReservationDate" runat="server" /> <asp:CalendarExtender ID="Calendar1" TargetControlID="txtHotelReservationDate" StartDate="3/2/2009" EndDate="5/16/2009" SelectedDate="3/2/2009" runat="server" /> </form> </body> </html> This page contains three controls: an Ajax Control Toolkit ToolkitScriptManager control, a standard ASP.NET TextBox control, and an Ajax Control Toolkit CalendarExtender control. Notice that the Calendar control includes StartDate and EndDate properties which restrict the range of valid dates. The Calendar control shows days, months, and years outside of the valid range as struck out. You cannot select days, months, or years which fall outside of the range. The following video illustrates interacting with the new date range feature: If you want to experiment with a live version of the Ajax Control Toolkit Calendar extender control then you can visit the Calendar Sample Page at the Ajax Control Toolkit Sample Site. Highlighted Today’s Date Another highly requested feature for the Calendar control was support for highlighting today’s date. The Calendar control now highlights the user’s current date regardless of the user’s time zone. Fixes to Time Zone and Daylight Savings Time Bugs We fixed several significant Calendar extender bugs related to time zones and daylight savings time. For example, previously, when you set the Calendar control’s SelectedDate property to the value 1/1/2007 then the selected data would appear as 12/31/2006 or 1/1/2007 or 1/2/2007 depending on the server time zone. For example, if your server time zone was set to Samoa (UTC-11:00), then setting SelectedDate=”1/1/2007” would result in “12/31/2006” being selected in the Calendar. Users of the Calendar extender control found this behavior confusing. After careful consideration, we decided to change the Calendar extender so that it interprets all dates as UTC dates. In other words, if you set StartDate=”1/1/2007” then the Calendar extender parses the date as 1/1/2007 UTC instead of parsing the date according to the server time zone. By interpreting all dates as UTC dates, we avoid all of the reported issues with the SelectedDate property showing the wrong date. Furthermore, when you set the StartDate and EndDate properties, you know that the same StartDate and EndDate will be selected regardless of the time zone associated with the server or associated with the browser. The date 1/1/2007 will always be the date 1/1/2007. The New Twitter Control This release of the Ajax Control Toolkit introduces a new twitter control. You can use the Twitter control to display recent tweets associated with a particular twitter user. You also can use this control to show the results of a twitter search. The following page illustrates how you can use the Twitter control to display recent tweets made by Scott Hanselman: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="TwitterProfile.aspx.cs" Inherits="WebApplication1.TwitterProfile" %> <%@ Register TagPrefix="asp" Namespace="AjaxControlToolkit" Assembly="AjaxControlToolkit" %> <html > <head runat="server"> <title>Twitter Profile</title> </head> <body> <form id="form1" runat="server"> <asp:ToolkitScriptManager ID="tsm" runat="server" /> <asp:Twitter ID="Twitter1" ScreenName="shanselman" runat="server" /> </form> </body> </html> This page includes two Ajax Control Toolkit controls: the ToolkitScriptManager control and the Twitter control. The Twitter control is set to display tweets from Scott Hanselman (shanselman): You also can use the Twitter control to display the results of a search query. For example, the following page displays all recent tweets related to the Ajax Control Toolkit: Twitter limits the number of times that you can interact with their API in an hour. Twitter recommends that you cache results on the server (https://dev.twitter.com/docs/rate-limiting). By default, the Twitter control caches results on the server for a duration of 5 minutes. You can modify the cache duration by assigning a value (in seconds) to the Twitter control's CacheDuration property. The Twitter control wraps a standard ASP.NET ListView control. You can customize the appearance of the Twitter control by modifying its LayoutTemplate, StatusTemplate, AlternatingStatusTemplate, and EmptyDataTemplate. To learn more about the new Twitter control, visit the live Twitter Sample Page. The New Gravatar Control The September 2011 release of the Ajax Control Toolkit also includes a new Gravatar control. This control makes it easy to display a unique image for each user of your website. A Gravatar is associated with an email address. You can visit Gravatar.com and upload an image and associate the image with your email address. That way, every website which uses Gravatars (such as the www.ASP.NET website) will display your image next to your name. For example, I visited the Gravatar.com website and associated an image of a Koala Bear with the email address [email protected]. The following page illustrates how you can use the Gravatar control to display the Gravatar image associated with the [email protected] email address: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="GravatarDemo.aspx.cs" Inherits="WebApplication1.GravatarDemo" %> <%@ Register TagPrefix="asp" Namespace="AjaxControlToolkit" Assembly="AjaxControlToolkit" %> <html xmlns="http://www.w3.org/1999/xhtml"> <head id="Head1" runat="server"> <title>Gravatar Demo</title> </head> <body> <form id="form1" runat="server"> <asp:ToolkitScriptManager ID="tsm" runat="server" /> <asp:Gravatar ID="Gravatar1" Email="[email protected]" runat="server" /> </form> </body> </html> The page above simply displays the Gravatar image associated with the [email protected] email address: If a user has not uploaded an image to Gravatar.com then you can auto-generate a unique image for the user from the user email address. The Gravatar control supports four types of auto-generated images: Identicon -- A different geometric pattern is generated for each unrecognized email. MonsterId -- A different image of a monster is generated for each unrecognized email. Wavatar -- A different image of a face is generated for each unrecognized email. Retro -- A different 8-bit arcade-style face is generated for each unrecognized email. For example, there is no Gravatar image associated with the email address [email protected]. The following page displays an auto-generated MonsterId for this email address: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="GravatarMonster.aspx.cs" Inherits="WebApplication1.GravatarMonster" %> <%@ Register TagPrefix="asp" Namespace="AjaxControlToolkit" Assembly="AjaxControlToolkit" %> <html xmlns="http://www.w3.org/1999/xhtml"> <head id="Head1" runat="server"> <title>Gravatar Monster</title> </head> <body> <form id="form1" runat="server"> <asp:ToolkitScriptManager ID="tsm" runat="server" /> <asp:Gravatar ID="Gravatar1" Email="[email protected]" DefaultImageBehavior="MonsterId" runat="server" /> </form> </body> </html> The page above generates the following image automatically from the supplied email address: To learn more about the properties of the new Gravatar control, visit the live Gravatar Sample Page. ASP.NET Connections Talk on the Ajax Control Toolkit If you are interested in learning more about the changes that we are making to the Ajax Control Toolkit then please come to my talk on the Ajax Control Toolkit at the upcoming ASP.NET Connections conference. In the talk, I will present a summary of the changes that we have made to the Ajax Control Toolkit over the last several months and discuss our future plans. Do you have ideas for new Ajax Control Toolkit controls? Ideas for improving the toolkit? Come to my talk – I would love to hear from you. You can register for the ASP.NET Connections conference by visiting the following website: Register for ASP.NET Connections Summary The previous release of the Ajax Control Toolkit – the July 2011 Release – has had over 100,000 downloads. That is a huge number of developers who are working with the Ajax Control Toolkit. We are really excited about the new features which we added to the Ajax Control Toolkit in the latest September sprint. We hope that you find the updated Calender control, the new Twitter control, and the new Gravatar control valuable when building your ASP.NET Web Forms applications.

Read the article

Differences Between NHibernate and Entity Framework

- by Ricardo Peres

Introduction NHibernate and Entity Framework are two of the most popular O/RM frameworks on the .NET world. Although they share some functionality, there are some aspects on which they are quite different. This post will describe this differences and will hopefully help you get started with the one you know less. Mind you, this is a personal selection of features to compare, it is by no way an exhaustive list. History First, a bit of history. NHibernate is an open-source project that was first ported from Java’s venerable Hibernate framework, one of the first O/RM frameworks, but nowadays it is not tied to it, for example, it has .NET specific features, and has evolved in different ways from those of its Java counterpart. Current version is 3.3, with 3.4 on the horizon. It currently targets .NET 3.5, but can be used as well in .NET 4, it only makes no use of any of its specific functionality. You can find its home page at NHForge. Entity Framework 1 came out with .NET 3.5 and is now on its second major version, despite being version 4. Code First sits on top of it and but came separately and will also continue to be released out of line with major .NET distributions. It is currently on version 4.3.1 and version 5 will be released together with .NET Framework 4.5. All versions will target the current version of .NET, at the time of their release. Its home location is located at MSDN. Architecture In NHibernate, there is a separation between the Unit of Work and the configuration and model instances. You start off by creating a Configuration object, where you specify all global NHibernate settings such as the database and dialect to use, the batch sizes, the mappings, etc, then you build an ISessionFactory from it. The ISessionFactory holds model and metadata that is tied to a particular database and to the settings that came from the Configuration object, and, there will typically be only one instance of each in a process. Finally, you create instances of ISession from the ISessionFactory, which is the NHibernate representation of the Unit of Work and Identity Map. This is a lightweight object, it basically opens and closes a database connection as required and keeps track of the entities associated with it. ISession objects are cheap to create and dispose, because all of the model complexity is stored in the ISessionFactory and Configuration objects. As for Entity Framework, the ObjectContext/DbContext holds the configuration, model and acts as the Unit of Work, holding references to all of the known entity instances. This class is therefore not lightweight as its NHibernate counterpart and it is not uncommon to see examples where an instance is cached on a field. Mappings Both NHibernate and Entity Framework (Code First) support the use of POCOs to represent entities, no base classes are required (or even possible, in the case of NHibernate). As for mapping to and from the database, NHibernate supports three types of mappings: XML-based, which have the advantage of not tying the entity classes to a particular O/RM; the XML files can be deployed as files on the file system or as embedded resources in an assembly; Attribute-based, for keeping both the entities and database details on the same place at the expense of polluting the entity classes with NHibernate-specific attributes; Strongly-typed code-based, which allows dynamic creation of the model and strongly typing it, so that if, for example, a property name changes, the mapping will also be updated. Entity Framework can use: Attribute-based (although attributes cannot express all of the available possibilities – for example, cascading); Strongly-typed code mappings. Database Support With NHibernate you can use mostly any database you want, including: SQL Server; SQL Server Compact; SQL Server Azure; Oracle; DB2; PostgreSQL; MySQL; Sybase Adaptive Server/SQL Anywhere; Firebird; SQLLite; Informix; Any through OLE DB; Any through ODBC. Out of the box, Entity Framework only supports SQL Server, but a number of providers exist, both free and commercial, for some of the most used databases, such as Oracle and MySQL. See a list here. Inheritance Strategies Both NHibernate and Entity Framework support the three canonical inheritance strategies: Table Per Type Hierarchy (Single Table Inheritance), Table Per Type (Class Table Inheritance) and Table Per Concrete Type (Concrete Table Inheritance). Associations Regarding associations, both support one to one, one to many and many to many. However, NHibernate offers far more collection types: Bags of entities or values: unordered, possibly with duplicates; Lists of entities or values: ordered, indexed by a number column; Maps of entities or values: indexed by either an entity or any value; Sets of entities or values: unordered, no duplicates; Arrays of entities or values: indexed, immutable. Querying NHibernate exposes several querying APIs: LINQ is probably the most used nowadays, and really does not need to be introduced; Hibernate Query Language (HQL) is a database-agnostic, object-oriented SQL-alike language that exists since NHibernate’s creation and still offers the most advanced querying possibilities; well suited for dynamic queries, even if using string concatenation; Criteria API is an implementation of the Query Object pattern where you create a semi-abstract conceptual representation of the query you wish to execute by means of a class model; also a good choice for dynamic querying; Query Over offers a similar API to Criteria, but using strongly-typed LINQ expressions instead of strings; for this, although more refactor-friendlier that Criteria, it is also less suited for dynamic queries; SQL, including stored procedures, can also be used; Integration with Lucene.NET indexer is available. As for Entity Framework: LINQ to Entities is fully supported, and its implementation is considered very complete; it is the API of choice for most developers; Entity-SQL, HQL’s counterpart, is also an object-oriented, database-independent querying language that can be used for dynamic queries; SQL, of course, is also supported. Caching Both NHibernate and Entity Framework, of course, feature first-level cache. NHibernate also supports a second-level cache, that can be used among multiple ISessionFactorys, even in different processes/machines: Hashtable (in-memory); SysCache (uses ASP.NET as the cache provider); SysCache2 (same as above but with support for SQL Server SQL Dependencies); Prevalence; SharedCache; Memcached; Redis; NCache; Appfabric Caching. Out of the box, Entity Framework does not have any second-level cache mechanism, however, there are some public samples that show how we can add this. ID Generators NHibernate supports different ID generation strategies, coming from the database and otherwise: Identity (for SQL Server, MySQL, and databases who support identity columns); Sequence (for Oracle, PostgreSQL, and others who support sequences); Trigger-based; HiLo; Sequence HiLo (for databases that support sequences); Several GUID flavors, both in GUID as well as in string format; Increment (for single-user uses); Assigned (must know what you’re doing); Sequence-style (either uses an actual sequence or a single-column table); Table of ids; Pooled (similar to HiLo but stores high values in a table); Native (uses whatever mechanism the current database supports, identity or sequence). Entity Framework only supports: Identity generation; GUIDs; Assigned values. Properties NHibernate supports properties of entity types (one to one or many to one), collections (one to many or many to many) as well as scalars and enumerations. It offers a mechanism for having complex property types generated from the database, which even include support for querying. It also supports properties originated from SQL formulas. Entity Framework only supports scalars, entity types and collections. Enumerations support will come in the next version. Events and Interception NHibernate has a very rich event model, that exposes more than 20 events, either for synchronous pre-execution or asynchronous post-execution, including: Pre/Post-Load; Pre/Post-Delete; Pre/Post-Insert; Pre/Post-Update; Pre/Post-Flush. It also features interception of class instancing and SQL generation. As for Entity Framework, only two events exist: ObjectMaterialized (after loading an entity from the database); SavingChanges (before saving changes, which include deleting, inserting and updating). Tracking Changes For NHibernate as well as Entity Framework, all changes are tracked by their respective Unit of Work implementation. Entities can be attached and detached to it, Entity Framework does, however, also support self-tracking entities. Optimistic Concurrency Control NHibernate supports all of the imaginable scenarios: SQL Server’s ROWVERSION; Oracle’s ORA_ROWSCN; A column containing date and time; A column containing a version number; All/dirty columns comparison. Entity Framework is more focused on Entity Framework, so it only supports: SQL Server’s ROWVERSION; Comparing all/some columns. Batching NHibernate has full support for insertion batching, but only if the ID generator in use is not database-based (for example, it cannot be used with Identity), whereas Entity Framework has no batching at all. Cascading Both support cascading for collections and associations: when an entity is deleted, their conceptual children are also deleted. NHibernate also offers the possibility to set the foreign key column on children to NULL instead of removing them. Flushing Changes NHibernate’s ISession has a FlushMode property that can have the following values: Auto: changes are sent to the database when necessary, for example, if there are dirty instances of an entity type, and a query is performed against this entity type, or if the ISession is being disposed; Commit: changes are sent when committing the current transaction; Never: changes are only sent when explicitly calling Flush(). As for Entity Framework, changes have to be explicitly sent through a call to AcceptAllChanges()/SaveChanges(). Lazy Loading NHibernate supports lazy loading for Associated entities (one to one, many to one); Collections (one to many, many to many); Scalar properties (thing of BLOBs or CLOBs). Entity Framework only supports lazy loading for: Associated entities; Collections. Generating and Updating the Database Both NHibernate and Entity Framework Code First (with the Migrations API) allow creating the database model from the mapping and updating it if the mapping changes. Extensibility As you can guess, NHibernate is far more extensible than Entity Framework. Basically, everything can be extended, from ID generation, to LINQ to SQL transformation, HQL native SQL support, custom column types, custom association collections, SQL generation, supported databases, etc. With Entity Framework your options are more limited, at least, because practically no information exists as to what can be extended/changed. It features a provider model that can be extended to support any database. Integration With Other Microsoft APIs and Tools When it comes to integration with Microsoft technologies, it will come as no surprise that Entity Framework offers the best support. For example, the following technologies are fully supported: ASP.NET (through the EntityDataSource); ASP.NET Dynamic Data; WCF Data Services; WCF RIA Services; Visual Studio (through the integrated designer). Documentation This is another point where Entity Framework is superior: NHibernate lacks, for starters, an up to date API reference synchronized with its current version. It does have a community mailing list, blogs and wikis, although not much used. Entity Framework has a number of resources on MSDN and, of course, several forums and discussion groups exist. Conclusion Like I said, this is a personal list. I may come as a surprise to some that Entity Framework is so behind NHibernate in so many aspects, but it is true that NHibernate is much older and, due to its open-source nature, is not tied to product-specific timeframes and can thus evolve much more rapidly. I do like both, and I chose whichever is best for the job I have at hands. I am looking forward to the changes in EF5 which will add significant value to an already interesting product. So, what do you think? Did I forget anything important or is there anything else worth talking about? Looking forward for your comments!

Read the article

CodePlex Daily Summary for Wednesday, February 17, 2010

CodePlex Daily Summary for Wednesday, February 17, 2010New ProjectsAcademic Success Accounting System: The system is intended to use by school teacher to set marks to students and estimate their academic success and possibilities. The client applicat...Access.PowerTools: Access PowerTools is currently a sample MS Access add-in project to try & test features of Add-in Express™ 2009 for Microsoft® Office and .net (ht...AntoonCms: AntoonCms makes it easy to maintain a simple website with it's builtin administration pages. It's developed in C# on target Framework 2.0 The CMS...ASP.NET MVC Mehr Lib: Mehr Lib makes it easier for ASP.NET MVC developers to do develop projects. It's developed in C#. This version currently include Ajax master detail...BCryptTool: Developer tool that calculates BCrypt hash codes for strings. BCrypt is an implementation of the Blowfish cipher and a computationally-expensive ha...Coronasoft Cryostasis scripting engine: A scripting engine that allows you to dynamically load plugins from just about any supported .NET language. Its written in C#. Languages supported ...Critical Point Search: Critical Point Searchcritical points: critical pointsFont Family Name Retrieval: This library helps developer to retrieve the font family name from the TTF, OTF and TTC font files, so that developer can display the font without ...jQuery Form Input Hints Plugin: Automatically display hints on input textboxes in your forms using this jQuery plugin. I wrote this code to be as simple and as easy to use as pos...Kojax: kojax projectKronRetro: KronRetro! Making a Habbo Retro just got easier! Powered by PHP & MySQL you can make a Habbo Retro site fast!MVVM Wrapper Kit: MVVM Wrapper Kit makes it easier for View Model programmers to wrap their business objects and collections while preserving change notification and...ObjectCartographer: ObjectCartographer is an object to object mapper and object factory. It's developed in C#.PE-file Reader Writer API (PERWAPI): PERWAPI is a reader writer module for .NET program executables. It has been used as back-end for progamming language compilers such as Gardens Poi...Pinger: A simple Pinger, pings an address until you press a buttonQPV: 0.1: QPV aka Que pelicula es una aplicacion que consiste crear una base de datos potente de peliculas, criticas e informacion para poder filtrar pelicul...SIMD Detector: This SIMD class helps developers to detect the types of SIMD instruction available on users' processor. It supports Intel and AMD CPUs. It is writt...StackOverflow Test Project: Following Andrew Siemer's StackOverflow Knowledge Exchange Project.WeBlog: A blogging platform built on the MVC framework The project will showcase current technologies such as MVC 2, Silverlight 4 and jQuery 1.4. Data pro...Webmedia: this is my webmedia projectWindows Azure RSS Reader: This is and online RSS reader based on the Windows Azure platformWordEditor. A Word Editor for Windows, and an extended RichTextBox control.: This is a word editor that can be used as a stand alone word processor, or added to an existing project.Домашняя Бухгалтерия: Программа для ведения домашнего бухгалтерского учета финансов. New ReleasesAccess.PowerTools: Access PowerTools Add-In Community Edition v.0.0.1: Access PowerTools Add-In Community Edition v.0.0.1 is a sample MS Access add-in project to try & test Add-in Express™ 2009 for Microsoft® Office an...Active CSS: ActiveCSS-0.1.1: revision for version 0.1ASP.NET: Microsoft Ajax Minifier 4.0: The Microsoft Ajax Minifier enables you to improve the performance of your Ajax applications by reducing the size of your Cascading Style Sheet and...ASP.NET MVC Mehr Lib: V1.0: Mehr Lib V1.0 This version currently include ajax master detail combo facilities.ASP.net Ribbon: Version 1.2: New controls : Expandable gallery Color Picker Multi color File Menu Some JS modifications. Some CSS modifications. Includes some functionna...ASP.NET Web Forms Model-View-Presenter (MVP) Contrib: WebForms MVP Contrib CTP6: This is a release of the WebForms MVP Contrib project for WebForms MVP CTP6. Release includes: WebForms MVP Contrib framework Ninject IoC containerAwesomiumDotNet: AwesomiumDotNet 1.2.1: - Added Awesomium 1.5 features: URL filtering, header rewrite rules, SetOpensExternalLinksInCallingFrame. - Numerous fixes and improvements.BCryptTool: BCryptTool v0.1: The Microsoft .NET Framework 3.5 (SP1) is needed to run this program.Buzz Dot Net: Buzz Dot Net v.1.10216: Features Parse Google Buzz feed to Objects Partial MVVM Implementation Partial OptimizationsCanvas VSDOC Intellisense: v1.0.0.0a: canvas-vsdoc.js and canvas-utils.js JavaScript intellisense for HTML5 Canvas element.CheckHeader: CheckHeader v0.8.5: The Microsoft .NET Framework 3.5 (SP1) is needed to run this program.Claymore MVP: Claymore 1.0.2.0: Changelog Added ASP.NET WebForm support via ClaymoreHttpModule class. Added xsd schema for Visual Studio Intellisense within App.config and Web....Dam Gd - URL Shortner: Dam.gd Version 1.1: This is the latest instalment in our URL shortner. It uses The Easy API http://theeasyapi.com to access data that is used for the back-end analyti...D-AMPS: D-AMPS 0.9.1: Initial version.easySMS: easySMS 1.0 Source code: easySMS 1.0 Source codeFont Family Name Retrieval: 1st Release: Version 1.0.0Free Silverlight & WPF Chart Control - Visifire: Visifire Now Supports DataBinding: Hi, Today we are releasing the much awaited DataBinding feature in Visifire 3.0.3 beta 3. Now you can Bind any DataSource at the Series level so t...GenerateTypedBamApi: Version 2.0: Changes in this release: NEW: Export functionality no longer requires Excel to be installed (uses OLE DB vs. Excel Automation; also enables usage i...Gmail Notifier 2: GmailNotifier2 1.2.1: Fixes issues #9652, #9653iTuner - The iTunes Companion: iTuner 1.1.3699: This includes the first pass of the iTuner Librarian including management of dead tracks, duplicates, and empty directories... While I promised a ...jQuery Form Input Hints Plugin: jQuery.InputHints v1.0: jQuery.InputHints v1.0 Includes Standard & minified source Demo HTML file VS2008 SolutionLibWowArmory: LibWowArmory 0.2.3 beta: LibWowArmory 0.2.3 betaThis release of the LibWowArmory source code matches the WoW Armory as of version 3.3.2. Changes since version 0.2.2:Update...Managed Extensibility Framework: MEF Preview 9: We have merged the .net 3.5 and Silverlight 3 into a single zip. The bin folder contains the binaries for .net 3.5 whereas bin\SL contains the bina...MDX Parser,Builder,DOM and OLAP visual controls with Writeback for Silverlight: Ranet.UILibrary.Olap-1.3.3.0-6571.msi: February 16, 2010 * MdxDesigner: Fix for the issue where when an element is clicked, the mouse wheel stops working until the cursor leaves and r...MEFGeneric: MEFGeneric Preview 9: MEFGeneric Preview 9 release.Mesopotamia Experiment: Mesopotamia 1.2.26: Bug Fixes - mud map - progress window - recycle app domains on robotics engine crashes( in command prompt and visual, major work) - fixed rooomba h...Microsoft Solution Framework for Business Intelligence in Media: Release 1.0: This is the public release of the Microsoft Solution Framework for Business Intelligence in Media (Release 1.0).MVVM Wrapper Kit: MVVM Wrapper Beta: A simple test project is included to get you up and running, and wrapping those business objects.nBayes - Bayesian Filtering in C#: nBayes v0.2: nBayes' indexing system is factored in such a way that you can easily replace the index with a custom implementation. This release introduces an ad...NetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.5: 3.6.0.5 16-February-2010 - Fix: SqlAzManSid Class. "Equals" matches object signiture instead of IAzManSid signiture. When a real null object is pas...ObjectCartographer: ObjectCartographer Code 1.0: This is the first release and contains code to help with object to object mapping (including mapping from one object to multiple objects), object f...Office Apps: 0.8.6: Bug fix's, added Calendar.OI - Open Internet: OI HTML and .XAP files (OI offline): this is the HTML code and the XAP file. please right-click the app at http://bit.ly/openinternet and select "install openinternet application to th...PE-file Reader Writer API (PERWAPI): PERWAPI-1.1.3: Perwapi version 1.1.3 is the complete distribution package. It contains Binary files, pdb files and xml files for the PERWAPI and SymbolRW compone...Pinger: Pinger 1.0.0.0 Binary: The Latest BinaryRNA Comparative Analysis Software Tools: RNA Comparative Analysis Software Tools 2.0: RNA Comparative Analysis Software Tools Version 2.0 Note: The RNA Comparative Analysis Software Tools are provided as is, without any warranty. No...SAL- Self Artificial Learning: Artificial Learning working proof of concept: This is a working proof of concept. It includes the Dev version (in .zip format) and the consumer version (in .exe format)SharePoint Management PowerShell scripts: SharePoint 2010 PowerShell Scripts: All the SharePoint 2010 PowerShell Scripts The first file is an Excel 2010 file allowing to find quiclky and easily the new cmdlets available wi...SIMD Detector: 1st Release: Version 1.3 Supports MMX/MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, SSE4a, SSE5, 3DNow.Terminals: Terminals 1.9 Beta Release: This is a beta release so the new features being added to terminals can be tested properly. The major change in this release is that Terminals has...Text Designer Outline Text Library: 9th minor release: Added the ability to select brush, such as gradient brush or texture brush for the text body. Added CSharp library, TextDesignerCSLibrary. Manage...VivoSocial: VivoSocial 7.0.2: This release has several updated modules. See the Support Forums for more details. Since we update modules very often, we will be changing how we d...WatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.6.00: changes CKEditor Upgrade to Version 3.2 SVN 5132 File Browser: After File Upload, File will be Auto Selected File Browser: Icons are corrected ...WordEditor. A Word Editor for Windows, and an extended RichTextBox control.: WordEditor Source Code: This contains the latest solution file, with all project files included.Домашняя Бухгалтерия: Alapha Realease: Принимаются ваши предложения по дизайну и функциональности программы.Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Image Resizer Powertoy Clone for WindowsMicrosoft SQL Server Community & SamplesASP.NETLiveUpload to FacebookMost Active ProjectsDinnerNow.netRawrBlogEngine.NETSimple SavantNB_Store - Free DotNetNuke Ecommerce Catalog Modulepatterns & practices – Enterprise LibraryPHPExcelSharpyjQuery Library for SharePoint Web ServicesFluent Validation for .NET

Read the article

Creating a dynamic proxy generator – Part 1 – Creating the Assembly builder, Module builder and cach

- by SeanMcAlinden

I’ve recently started a project with a few mates to learn the ins and outs of Dependency Injection, AOP and a number of other pretty crucial patterns of development as we’ve all been using these patterns for a while but have relied totally on third part solutions to do the magic. We thought it would be interesting to really get into the details by rolling our own IoC container and hopefully learn a lot on the way, and you never know, we might even create an excellent framework. The open source project is called Rapid IoC and is hosted at http://rapidioc.codeplex.com/ One of the most interesting tasks for me is creating the dynamic proxy generator for enabling Aspect Orientated Programming (AOP). In this series of articles, I’m going to track each step I take for creating the dynamic proxy generator and I’ll try my best to explain what everything means - mainly as I’ll be using Reflection.Emit to emit a fair amount of intermediate language code (IL) to create the proxy types at runtime which can be a little taxing to read. It’s worth noting that building the proxy is without a doubt going to be slightly painful so I imagine there will be plenty of areas I’ll need to change along the way. Anyway lets get started… Part 1 - Creating the Assembly builder, Module builder and caching mechanism Part 1 is going to be a really nice simple start, I’m just going to start by creating the assembly, module and type caches. The reason we need to create caches for the assembly, module and types is simply to save the overhead of recreating proxy types that have already been generated, this will be one of the important steps to ensure that the framework is fast… kind of important as we’re calling the IoC container ‘Rapid’ – will be a little bit embarrassing if we manage to create the slowest framework. The Assembly builder The assembly builder is what is used to create an assembly at runtime, we’re going to have two overloads, one will be for the actual use of the proxy generator, the other will be mainly for testing purposes as it will also save the assembly so we can use Reflector to examine the code that has been created. Here’s the code: DynamicAssemblyBuilder using System; using System.Reflection; using System.Reflection.Emit; namespace Rapid.DynamicProxy.Assembly { /// <summary> /// Class for creating an assembly builder. /// </summary> internal static class DynamicAssemblyBuilder { #region Create /// <summary> /// Creates an assembly builder. /// </summary> /// <param name="assemblyName">Name of the assembly.</param> public static AssemblyBuilder Create(string assemblyName) { AssemblyName name = new AssemblyName(assemblyName); AssemblyBuilder assembly = AppDomain.CurrentDomain.DefineDynamicAssembly( name, AssemblyBuilderAccess.Run); DynamicAssemblyCache.Add(assembly); return assembly; } /// <summary> /// Creates an assembly builder and saves the assembly to the passed in location. /// </summary> /// <param name="assemblyName">Name of the assembly.</param> /// <param name="filePath">The file path.</param> public static AssemblyBuilder Create(string assemblyName, string filePath) { AssemblyName name = new AssemblyName(assemblyName); AssemblyBuilder assembly = AppDomain.CurrentDomain.DefineDynamicAssembly( name, AssemblyBuilderAccess.RunAndSave, filePath); DynamicAssemblyCache.Add(assembly); return assembly; } #endregion } } So hopefully the above class is fairly explanatory, an AssemblyName is created using the passed in string for the actual name of the assembly. An AssemblyBuilder is then constructed with the current AppDomain and depending on the overload used, it is either just run in the current context or it is set up ready for saving. It is then added to the cache. DynamicAssemblyCache using System.Reflection.Emit; using Rapid.DynamicProxy.Exceptions; using Rapid.DynamicProxy.Resources.Exceptions; namespace Rapid.DynamicProxy.Assembly { /// <summary> /// Cache for storing the dynamic assembly builder. /// </summary> internal static class DynamicAssemblyCache { #region Declarations private static object syncRoot = new object(); internal static AssemblyBuilder Cache = null; #endregion #region Adds a dynamic assembly to the cache. /// <summary> /// Adds a dynamic assembly builder to the cache. /// </summary> /// <param name="assemblyBuilder">The assembly builder.</param> public static void Add(AssemblyBuilder assemblyBuilder) { lock (syncRoot) { Cache = assemblyBuilder; } } #endregion #region Gets the cached assembly /// <summary> /// Gets the cached assembly builder. /// </summary> /// <returns></returns> public static AssemblyBuilder Get { get { lock (syncRoot) { if (Cache != null) { return Cache; } } throw new RapidDynamicProxyAssertionException(AssertionResources.NoAssemblyInCache); } } #endregion } } The cache is simply a static property that will store the AssemblyBuilder (I know it’s a little weird that I’ve made it public, this is for testing purposes, I know that’s a bad excuse but hey…) There are two methods for using the cache – Add and Get, these just provide thread safe access to the cache. The Module Builder The module builder is required as the create proxy classes will need to live inside a module within the assembly. Here’s the code: DynamicModuleBuilder using System.Reflection.Emit; using Rapid.DynamicProxy.Assembly; namespace Rapid.DynamicProxy.Module { /// <summary> /// Class for creating a module builder. /// </summary> internal static class DynamicModuleBuilder { /// <summary> /// Creates a module builder using the cached assembly. /// </summary> public static ModuleBuilder Create() { string assemblyName = DynamicAssemblyCache.Get.GetName().Name; ModuleBuilder moduleBuilder = DynamicAssemblyCache.Get.DefineDynamicModule (assemblyName, string.Format("{0}.dll", assemblyName)); DynamicModuleCache.Add(moduleBuilder); return moduleBuilder; } } } As you can see, the module builder is created on the assembly that lives in the DynamicAssemblyCache, the module is given the assembly name and also a string representing the filename if the assembly is to be saved. It is then added to the DynamicModuleCache. DynamicModuleCache using System.Reflection.Emit; using Rapid.DynamicProxy.Exceptions; using Rapid.DynamicProxy.Resources.Exceptions; namespace Rapid.DynamicProxy.Module { /// <summary> /// Class for storing the module builder. /// </summary> internal static class DynamicModuleCache { #region Declarations private static object syncRoot = new object(); internal static ModuleBuilder Cache = null; #endregion #region Add /// <summary> /// Adds a dynamic module builder to the cache. /// </summary> /// <param name="moduleBuilder">The module builder.</param> public static void Add(ModuleBuilder moduleBuilder) { lock (syncRoot) { Cache = moduleBuilder; } } #endregion #region Get /// <summary> /// Gets the cached module builder. /// </summary> /// <returns></returns> public static ModuleBuilder Get { get { lock (syncRoot) { if (Cache != null) { return Cache; } } throw new RapidDynamicProxyAssertionException(AssertionResources.NoModuleInCache); } } #endregion } } The DynamicModuleCache is very similar to the assembly cache, it is simply a statically stored module with thread safe Add and Get methods. The DynamicTypeCache To end off this post, I’m going to create the cache for storing the generated proxy classes. I’ve spent a fair amount of time thinking about the type of collection I should use to store the types and have finally decided that for the time being I’m going to use a generic dictionary. This may change when I can actually performance test the proxy generator but the time being I think it makes good sense in theory, mainly as it pretty much maintains it’s performance with varying numbers of items – almost constant (0)1. Plus I won’t ever need to loop through the items which is not the dictionaries strong point. Here’s the code as it currently stands: DynamicTypeCache using System; using System.Collections.Generic; using System.Security.Cryptography; using System.Text; namespace Rapid.DynamicProxy.Types { /// <summary> /// Cache for storing proxy types. /// </summary> internal static class DynamicTypeCache { #region Declarations static object syncRoot = new object(); public static Dictionary<string, Type> Cache = new Dictionary<string, Type>(); #endregion /// <summary> /// Adds a proxy to the type cache. /// </summary> /// <param name="type">The type.</param> /// <param name="proxy">The proxy.</param> public static void AddProxyForType(Type type, Type proxy) { lock (syncRoot) { Cache.Add(GetHashCode(type.AssemblyQualifiedName), proxy); } } /// <summary> /// Tries the type of the get proxy for. /// </summary> /// <param name="type">The type.</param> /// <returns></returns> public static Type TryGetProxyForType(Type type) { lock (syncRoot) { Type proxyType; Cache.TryGetValue(GetHashCode(type.AssemblyQualifiedName), out proxyType); return proxyType; } } #region Private Methods private static string GetHashCode(string fullName) { SHA1CryptoServiceProvider provider = new SHA1CryptoServiceProvider(); Byte[] buffer = Encoding.UTF8.GetBytes(fullName); Byte[] hash = provider.ComputeHash(buffer, 0, buffer.Length); return Convert.ToBase64String(hash); } #endregion } } As you can see, there are two public methods, one for adding to the cache and one for getting from the cache. Hopefully they should be clear enough, the Get is a TryGet as I do not want the dictionary to throw an exception if a proxy doesn’t exist within the cache. Other than that I’ve decided to create a key using the SHA1CryptoServiceProvider, this may change but my initial though is the SHA1 algorithm is pretty fast to put together using the provider and it is also very unlikely to have any hashing collisions. (there are some maths behind how unlikely this is – here’s the wiki if you’re interested http://en.wikipedia.org/wiki/SHA_hash_functions) Anyway, that’s the end of part 1 – although I haven’t started any of the fun stuff (by fun I mean hairpulling, teeth grating Relfection.Emit style fun), I’ve got the basis of the DynamicProxy in place so all we have to worry about now is creating the types, interceptor classes, method invocation information classes and finally a really nice fluent interface that will abstract all of the hard-core craziness away and leave us with a lightning fast, easy to use AOP framework. Hope you find the series interesting. All of the source code can be viewed and/or downloaded at our codeplex site - http://rapidioc.codeplex.com/ Kind Regards, Sean.

Read the article

Silverlight 4 Training Kit

- by ScottGu

We recently released a new free Silverlight 4 Training Kit that walks you through building business applications with Silverlight 4. You can browse the training kit online or alternatively download an entire offline version of the training kit. The training material is structured on teaching how to use the new Silverlight 4 features to build an end to end business application. The training kit includes 8 modules, 25 videos, and several hands on labs. Below is a breakdown and links to all of the content. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Module 1: Introduction Click here to watch this module. In this video John Papa and Ian Griffiths discuss the key areas that the Building Business Applications with Silverlight 4 course focuses on. This module is the overview of the course and covers many key scenarios that are faced when building business applications, and how Silverlight can help address them. Module 2: WCF RIA Services Click here to explore this module. In this lab, you will create a web site for managing conferences that will be the basis for the other labs in this course. Don’t worry if you don’t complete a particular lab in the series – all lab manual instructions are accompanied by completed solutions, so you can either build your own solution from start to finish, or dive straight in at any point using the solutions provided as a starting point. In this lab you will learn how to set up WCF RIA Services, create bindings to the domain context, filter using the domain data source, and create domain service queries. Online Link Download Source Download Lab Document Videos Module 2.1 - WCF RIA Services Ian Griffiths sets up the Entity Framework and WCF RIA Services for the sample Event Manager application for the course. He covers how to set up the services, how the Domain Services work and the role that the DomainContext plays in the sample application. He also reviews the metadata classes and integrating the navigation framework. Module 2.2 – Using WCF RIA Services to Edit Entities Ian Griffiths discusses how he adds the ability to edit and create individual entities with the features built into WCF RIA Services into the sample Event Manager application. He covers data binding fundamentals, IQueryable, LINQ, the DomainDataSource, navigation to a single entity using the navigation framework, and how to use the Visual Studio designer to do much of the work . Module 2.3 – Showing Master/Details Records Using WCF RIA Services Ian Griffiths reviews how to display master/detail records for the sample Event Manager application using WCF RIA Services. He covers how to use the Include attribute to indicate which elements to serialize back to the client. Ian also demonstrates how to use the Data Sources window in the designer to add and bind controls to specific data elements. He wraps up by showing how to create custom services to the Domain Services. Module 3 – Authentication, Validation, MVVM, Commands, Implicit Styles and RichTextBox Click here to visit this module. This lab demonstrates how to build a login screen, integrate ASP.NET authentication, and perform validation on data elements. Model-View-ViewModel (MVVM) is introduced and used in this lab as a pattern to help separate the UI and business logic. You will also learn how to use implicit styling and the new RichTextBox control. Online Link Download Source Download Lab Document Videos Module 3.1 – Authentication Ian Griffiths covers how to integrate a login screen and authentication into the sample Event Manager application. Ian shows how to use the ASP.NET authentication and integrate it into WCF RIA Services and the Silverlight presentation layer. Module 3.2 – MVVM Ian Griffiths covers how to Model-View-ViewModel (MVVM) patterns into the sample Event Manager application. He discusses why MVVM exists, what separated presentation means, and why it is important. He shows how to connect the View to the ViewModel, why data binding is important in this symbiosis, and how everything fits together in the overall application. Module 3.3 –Validation Ian Griffiths discusses how validation of user input can be integrated into the sample Event Manager application. He demonstrates how to use the DataAnnotations, the INotifyDataErrorInfo interface, binding markup extensions, and WCF RIA Services in concert to achieve great validation in the sample application. He discusses how this technique allows for property level validation, entity level validation, and asynchronous server side validation. Module 3.4 – Implicit Styles Ian Griffiths discusses how why implicit styles are important and how they can be integrated into the sample Event Manager application. He shows how implicit styles defined in a resource dictionary can be applied to all elements of a particular kind throughout the application. Module 3.5 – RichTextBox Ian Griffiths discusses how the new RichTextBox control and it can be integrated into the sample Event Manager application. He demonstrates how the RichTextBox can provide editing for the event information and how it can display the rich text for selection and copying. Module 4 – User Profiles, Drop Targets, Webcam and Clipboard Click here to visit this module. This lab builds new features into the sample application to take the user's photo. It teaches you how to use the webcam to capture an image, use Silverlight as a drop target, and take advantage of programmatic access to the clipboard. Link Download Source Download Lab Document Videos Module 4.1 – Webcam Ian Griffiths demonstrates how the webcam adds value to the sample Event Manager application by capturing an image of the attendee. He discusses the VideoCaptureDevice, the CaptureDviceConfiguration, and the CaptureSource classes and how they allow audio and video to be captured so you can grab an image from the capture device and save it. Module 4.2 - Drag and Drop in Silverlight Ian Griffiths demonstrates how to capture and handle the Drop in the sample Event Manager application so the user can drag a photo from a file and drop it into the application. Ian reviews the AllowDrop property, the Drop event, how to access the file that can be dropped, and the other drag related events. He also reviews how to make this work across browsers and the challenges for this. Module 5 – Schedule Planner and Right Mouse Click Click here to visit this module. This lab builds on the application to allow grouping in the DataGrid and implement right mouse click features to add context menu support. Link Download Source Download Lab Document Videos Module 5.1 – Grouping and Binding Ian Griffiths demonstrates how to use the grouping features for data binding in the DataGrid and how it applies to the sample Event Manager application. He reviews the role of the CollectionViewSource in grouping, customizing the templates for headers, and how to work with grouping with ItemsControls. Module 5.2 – Layout Visual States Ian Griffiths demonstrates how to use the Fluid UI animation support for visual states in the ListBox control DataGrid and how it applies to the sample Event Manager application. He reviews the 3 visual states of BeforeLoaded, AfterLoaded, and BeforeUnloaded. Module 5.3 – Right Mouse Click Ian Griffiths demonstrates how to add support for handling the right mouse button click event to display a context menu for the Event Manager application. He demonstrates how to handle the event, show a custom context menu control, and integrate it into the scheduling portion of the application. Module 6 – Printing the Schedule Click here to visit this module. This lab teaches how to use the new printing features in Silverlight 4. The lab walks through the PrintDocument class and the ViewBox control, while showing how to print multiple pages of content using them. Link Download Source Download Lab Document Videos Module 6.1 – Printing and the Viewbox Ian Griffiths demonstrates how to add the ability to print the schedule to the sample Event Manager application. He walks through the importance of the PrintDocument class and its members. He also shows how to handle printing the visual tree and how the ViewBox control can help. Module 6.2 – Multi Page Printing Ian Griffiths expands on his printing discussion by showing how to handle printing multiple pages of content for the sample Event Manager application. He shows how to paginate the content and points out various tips to keep in mind when determining the printable area. Module 7 – Running the Event Dashboard Out of Browser Click here to visit this module. This lab builds a dashboard for the sample application while explaining the fundamentals of the out of browser features, how to handle authentication, displaying notifications (toasts), and how to use native integration to use COM Interop with Silverlight. Link Download Source Download Lab Document Videos Module 7.1 – Out of Browser Ian Griffiths discusses the role of an Out of Browser application for administrators to manage the events and users in the sample Event Manager application. He discusses several reasons why out of browser applications may better suit your needs including custom chrome, toasts, window placement, cross domain access, and file access. He demonstrates the basic technique to take your application and make it work out of browser using the tools. Module 7.2 – NotificationWindow (Toasts) for Elevated Trust Out of Browser Applications Ian Griffiths discusses the how toasts can be used in the sample Event Manager application to show information that may require the user's attention. Ian covers how to create a toast using the NotificationWindow, security implications, and how to make the toast appear as needed. Module 7.3 – Out of Browser Window Placement Ian Griffiths discusses the how to manage the window positioning when building an out of browser application, handling the windows state, and controlling and handling activation of the window. Module 7.4 – Out of Browser Elevated Trust Application Overview Ian Griffiths discusses the implications of creating trusted out of browser application for the Event Manager sample application. He reviews why you might want to use elevated trust, what features is opens to you, and how to take advantage of them. Topics Ian covers include the dynamic keyword in C# 4, the AutomationFactory class, the API to check if you are in a trusted application, and communicating with Excel. Module 8 – Advanced Out of Browser and MEF Click here to visit this module. This hands-on lab walks through the creation of a trusted out of browser application and the new functionality that comes with that. You will learn to use COM Automation, handle the window closing event, set custom window chrome, digitally sign your Silverlight out of browser trusted application, create a silent install option, and take advantage of MEF. Link Download Source Download Lab Document Videos Module 8.1 – Custom Window Chrome for Elevated Trust Out of Browser Applications Ian Griffiths discusses how to replace the standard operating system window chrome with customized chrome for an elevated trusted out of browser application. He covers how it is important to handle close, resize, minimize, and maximize events. Ian mentions that the tooling was not ready when he shot this video, but the good news is that the tooling now supports setting the custom chrome directly from the property page for the Silverlight application. Module 8.2 – Window Closing Event for Out of Browser Applications Ian Griffiths discusses the WindowClosing event and how to handle and optionally cancel the event. Module 8.3 – Silent Install of Out of Browser Applications Ian Griffiths discusses how to use the SLLauncher executable to install an out of browser application. He discusses the optional command line switches that can be set including how the emulate switch can help you emulate the install process. Ian also shows how to setup a shortcut for the application and tell the application where it should look for future updates online. Module 8.4 – Digitally Signing Out of Browser Application Ian Griffiths discusses how and why to digitally sign an out of browser application using the signtool program. He covers what trusted certificates are, the implications of signing (or not signing), and the effect on the user experience. Module 8.5 – The Value of MEF with Silverlight Ian Griffiths discusses what MEF is, how your application can benefit from it, and the fundamental features it puts at your disposal. He covers the 3 step import, export and compose process as well as how to dynamically import XAP files using MEF. Summary As you can probably tell from the long list above – this series contains a ton of great content, and hopefully provides a nice end-to-end walkthrough that helps explain how to take advantage of Silverlight 4 (and all its new features). Hope this helps, Scott

Search Results

Search found 8962 results on 359 pages for 'abstract factory pattern'.

Page 348/359 | < Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355 | Next Page >

- by Rajarshi

- by Vlad

- by skyler

- by DG KOL

- by baroquedub

- by dan.codes

- by user2434653

- by j_random_hacker

- by Anonymous Coward

- by Nick Thissen

- by Benchik

- by mhucka

- by ihatenetworkcoding

- by mark

- by learningtolive

- by benjiisnotcool

- by IcyFlame

- by brainbox

- by SeanMcAlinden

- by Steve Michelotti

- by Stephen Walther

- by Ricardo Peres

- by SeanMcAlinden

- by ScottGu

< Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355 | Next Page >