Search Results

Search found 10921 results on 437 pages for 'latex environment'.

Page 348/437 | < Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >

• Why can't a PC with 2 network cards be accessed by hostname?

  - by lewis

  I set up PC with 2 network cards, connected to the same LAN. I can connect to this PC (e.g. by remote desktop) only via ip-addresses. Accessing by hostname does not work. Why is this the case? UPDATE: Full environment 1. PC with 2 hardware network adapters. 2. On this PC installed VMWare Workstation. Created 3 VM's, networked by "bridged" network setting in VMWare. 3. In LAN all ip-addresses given from DHCP. 4. Win2k8 on all hosts (both physical and vitrual). As result: 1. PC has 2 ip-address (e.g. 192.168.1.71 and 192.168.1.72). PC available in LAN by ip-addreses, but not avail by hostname. 2. VM's has own ip-addr on each (e.g. 192.168.1.73, *74, *75 etc). They are available from LAN by their ip's, BUT not by their hostnames. How can I access to PC and to VM's by hostname?

  Read the article

• 150 TB and growing, but how to grow?

  - by seandavi

  My group currently has two largish storage servers, both NAS running debian linux. The first is an all-in-one 24-disk (SATA) server that is several years old. We have two hardware RAIDS set up on it with LVM over those. The second server is 64 disks divided over 4 enclosures, each a hardware RAID 6, connected via external SAS. We use XFS with LVM over that to create 100TB useable storage. All of this works pretty well, but we are outgrowing these systems. Having build two such servers and still growing, we want to build something that allows us more flexibility in terms of future growth, backup options, that behaves better under disk failure (checking the larger filesystem can take a day or more), and can stand up in a heavily concurrent environment (think small computer cluster). We do not have system administration support, so we administer all of this ourselves (we are a genomics lab). So, what we seek is a relatively low-cost, acceptable performance storage solution that will allow future growth and flexible configuration (think ZFS with different pools having different operating characteristics). We are probably outside the realm of a single NAS. We have been thinking about a combination of ZFS (on openindiana, for example) or btrfs per server with glusterfs running on top of that if we do it ourselves. What we are weighing that against is simply biting the bullet and investing in Isilon or 3Par storage solutions. Any suggestions or experiences are appreciated.

  Read the article

• GroupWise 6.5 IMAP Service Shuts Down-Needs Constant Restarting

  - by Jeffrey Majette

  I have an issue with my aging (and soon to be replaced) GroupWise 6.5 system. The IMAP service in the GWIA tends to periodically shut down, requiring that I restart the service. When IMAP is down, my end users who use Blackberry BIS cannot send or receive email on their devices. It's a royal pain to have to restart the IMAP service several times a day. The GWIA logs do not seem to indicate a problem. I thought I was on to something yesterday. I discovered that the gwia.cfg file located in SYS:SYSTEM was actually from GW 6.0. The gwia.cfg in DOMAIN\WPGATE\GWIA was titled for GW 6.5 when opening the file for editing. I changed the generic placeholder info in the file to match my environment and restarted the gwia. However, it made no difference in performance. The IMAP service shuts down about 30 minutes after the last restart. I know this version of GW is antiquated. We are in the process of migrating to Google Apps. But, if anyone has an idea that could fix this issue, I and my end user community would be forever grateful!

  Read the article

• Export files to remote server using TortoiseSVN

  - by Matt

  Hi, I'm using TortoiseSVN to keep revisions of my code. When I commit changes, I take note of what files have changed and upload them to my server using FTP. Here's my workflow: Edit files on local computer (eg. files in C:\Users\Me\web) Commit changes to local repository using rightclick- TortoiseSVN- SVN Commit. Take the files, open FileZilla (FTP client) and upload the files to a remote server. I was wondering if there was a way in which I could omit step 3 from my workflow. Basically I would like the changed files to be automatically uploaded to the remote server when I commit a version to the repository. Information about my computer environment: Windows 7 Ultimate x64 with TortoiseSVN x64 Notepad++ text editor Files edited are PHP, CSS, JS, HTML, etc. Server is running Linux with PHP 5.2 and MySQL. FileZilla is used to upload files. I can connect to the server via SSH if that is needed. Thank you in advance.

  Read the article

• Random “Lost connection to MySQL server at 'reading initial communication packet', system error: 0”

  - by user1606545

  Sometimes I get the error from MYSQL server: Lost connection to MySQL server at 'reading initial communication packet', system error: 0 I cannot find the cause, since most of the time it works, but every week for some hours I get this error. I googled, but there seem to be only users which have this error permanently. But in this case, it only occurs sometimes. I checked hosts.allow and hosts.deny, but the host is allowed and not denied. Also sometimes I get the error: File './database/table.MYD' not found (Errcode: 24) It occurs very rarely. But it occurs for some hours once a week, sometimes on multiple days, but suddenly the problem disappears again. I have checked the open files limit. It's 2048 and should be absolutely enough. I also tried to increase the number of open files nevertheless, but no effect. I thought, perhaps the process does not close some tables. But this is impossible, because after a while everythings o.k. again and the process opens maximum 100 tables at once. I also checked the MySQL-runtime-environment, and there were 930 opened files. I cannot explain that. After a while it's 129. I am running a MySQL-Server on a SUSE-Linux machine. I connect to the MySQL-Server from another host by the command line tool "mysql" and by MySQL-C-connector. The MySQL-Server is version 5.0.67.

  Read the article

• Mounting fuse sshfs fails when invoked by Cron on FreeBSD 9.0

  - by Tal

  I have a remote server filesystem that I'm attempting to mount locally on a FreeBSD 9 machine via FUSE sshfs, and Cron for a backup routine. I have ssh keys between the boxes setup to allow for passwordless login as the root user on the local machine. Cron is set to run the following script (in Root's crontab): #!/bin/sh echo "Mounting Share" /usr/local/bin/sshfs -C -o reconnect -o idmap=user -o workaround=all <remote user>@<remote domain>.com: /mnt/remote_server As root, I can run this script on the command line without issue, and without being asked for a password the share mounts successfully. Yet, when run by Cron the script fails. The path to sshfs is identical to the value of which sshfs Here is the email root receives from the Cron Daemon: X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <HOME=/root> X-Cron-Env: <PATH=/usr/bin:/bin> X-Cron-Env: <LOGNAME=root> X-Cron-Env: <USER=root> Mounting Share fuse: failed to exec mount program: No such file or directory fuse: failed to mount file system: No such file or directory I'm stumped as to why I'm receiving No such file or directory in this instance. It further seems odd given that the paths appear to be correct. I've also attempted to compare the output of env on the shell with env inserted into the script. I don't see any environment variables that should cause this trouble. At bootup, FUSE reports its version as: fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 Help me ServerFault wizards, you're my only hope!

  Read the article

• How to improve Samba performance on VirtualBox machine?

  - by ColinM

  I am running a Windows 7 64bit host and Ubuntu 9.04 32bit guest inside of VirtualBox 4.0.0 on a laptop which has internet connectivity via Wifi. The main use is writing code for which I use Netbeans. My dev environment is hte virtual machine and I use Samba on the VM to share the code directory so that I can use Netbeans on the host as my IDE. Unfortunately Netbeans does a lot of disk access and due to the poor Samba performance it makes the IDE hardly usable. How can I improve performance of the Samba share? On my desktop it isn't so bad but I don't know what the difference would be since they are similar setups (Win 7 hosts, cloned guests, SSDs, Vbox guests using SATA in AHCI mode, etc..). With Bridged networking is the performance between the host and guest limited by the physical hardware (Intel 6200 AGN on laptop)? I switched to Host-only and it didn't seem to improve performance at all. To clarify bad performance, I used 7zip to zip a project directory and got 19kbs to 500kbs depending on the size of the files being zipped. On my desktop it was in the ~10mbs range. Any tips for VirtualBox/Samba configuration to get improve the performance? I am using Samba 3.3.2. Hopefully Samba with SMB2 support will be released soon..

  Read the article

• How to inactive Active Directory users, 1 month after their FIRST LOGIN, instead of defining a solid expiration date

  - by smhnaji

  We want to give access to some Active Directory users, so they can remotely have access to our server and download from a special folder of the server. The licenses we give to users, are time base. There should be 1 month, 2 month, ..., 1 year, ... licenses. CURRENT SITUATION (WHAT I DON'T WANT): When users are created and added to the OS, a solid expiration date is given. WHAT I WANT: Users' expiration date should be calculated automatically after the first login. The user might not need his account right when purchases the license. In other words: When a license of the user we create is purchased at Jan 1st, he should use the license until Feb 1st. No matter whether he really logs in or not. He cannot come Feb 5th and begin using his license because that has expired then. What I want is that when he comes at Feb 5th and begins using, the license update until March 5th. Working environment is Windows Server 2012. By the word 'user', I mean Active Directory Users.

  Read the article

• Postgresql Data Aggregation over WAN Securely

  - by Zach

  Hey guys, Need some advice on how to proceed with this situation: My current scenario is that I have several postgresql (50+) boxes deployed throughout various locations and data centers and a beefy postgresql box setup at a homebase location. All of the deployed boxes have identical database layouts. I'm looking for a solution that would allow for a few things. I realize some of these options overlap and some might only contain mutually exclusive solutions. However, I'm interested to hear your thoughts :) Remotely query the deployed boxes and pull the results back to the homebase box for processing. Nightly (remote) "sync" or dump the deployed boxes' databases to a master database on the homebase box. Remotely push a table entry to all of the deployed boxes from the homebase box. Ensure security of data in transit, and remotely deployed boxes. Up to this point I've been floating on a homebrew multithreaded python/perl system that SSH's into these boxes remotely, which are ACL'ed off to the homebase server and pulls (or pushes) the raw query results over the ssh connection. I have even touched #2 (remote syncing) as I know that would get nasty really quick. I'm interested in any ideas for a more elegant solution that can scale up and stick to my FreeBSD/Linux environment.

  Read the article

• Single Sign On 802.1x Wireless - saying “Connecting to <SSID>”, hangs for 10 seconds, fails with “Unable to connect to <SSID>, Logging on…”.

  - by Phaedrus

  We are implementing WiFi on Windows 7 machines in our corporate environment. Machines should be able to log into the domain by WiFi as the Machine (Pre-Logon), and as the User (Post-Logon). We have everything working correctly except for 2 things: 1) Sometimes the login scripts don't run 2) The user VLAN is sometimes different than the machine vlan, and no DHCP renew occurs after user logon. I am clear that both these problems should be fixable by using the "Single Sign On" Option under the 802.1x Wireless Vista GPO, and setting the wireless to connect immediately before user logon and also by enabling "This network uses different VLAN for authentication with machine and user credentials" If I enable these GPO settings in a lab, the computer does authenticate & gets WIFI before the user logs on, so when the login box is displayed, it says “Windows will try to connect to ”, even though it is already connected (which should be ok?). Enter the user credentials and it goes to a screen saying “Connecting to ”, hangs for 10 seconds, fails with “Unable to connect to , Logging on…”. Desktop fires up and then the user re-authenticates with no problem as himself instead of the machine, but by that point, we defeat the point of the WiFi SSO “before user logon”. Also by that point, no DHCP renew seems to occur, and the user is still stuck with the wrong IP address for the new VLAN. When the “Connecting to ” screen comes up, there’s no indication on the AP or the Radius server that anything whatsoever is happening after credentials are entered until after the domain logon. Also with this policy enabled, sometimes windows hangs on a black screen indefinitely until I disable the Wireless NIC, so something is knackered for sure. What have I missed? Suggestions are much appreciated... /P

  Read the article

• Have a set a cgi scripts shared by multiple domains

  - by rpat

  Goal: Have multiple domains share a set of cgi(perl) scripts Environment: Apache 2.0 on a dedicated Cent OS server. (Apache configuration files generated by cPanel) I have dozens of domains on the dedicated server. The domains set up by cPanel under VirtualHost section. I have almost no knowledge of Apache. Most of what I do is taken care of by cPanel. I would like to put a set of scripts under one directory (perhaps under / or /opt ) and for each of the domains, under the individual cgi-bin, I would like to create a symbolic link to this common directory. This way I am hoping to avoid having to keep a copy of scripts for every domain. Since Apache config files are generated by cPanel, I would not like to manually make changes to those. Beside, I could mess things up. I see that cPanel recommends use of include files rather than changing the httpd.conf Perhaps I need to have the following of symbolic links enabled in the cgi-bin directory and allow the web server user execute the scripts not owned by it. May be I am making things more complicated than they are. I would be glad to use any other means to achieve my goal. Thanks in advance for your help. *I asked this on stackoverflow and some one suggested that I could ask this on serverfault.

  Read the article

• error 503: Can't deploy rails 3 app with apache + thin (bitnamy ruby stack)

  - by Pacu

  As you'll notice, I'm a bit of a noob on Rails. Here's the thing I have a EC2 Bitnami RubyStack AMI running. I'm trying to deploy the sample project to be sure I'm doing the right thing, but I'm not getting anywhere at all. I just get a 503 error I'm following bitnami's docs on thin + apache Here are my files: the httpd.conf I include in the main httpd.conf Alias /sample "/home/bitnami/stack/projects/sample/public" <Directory "/home/bitnami/stack/projects/sample/public"> AllowOverride None Order allow,deny Allow from all </Directory> ProxyPass /sample balancer://appcluster ProxyPassReverse /sample balancer://appcluster <Proxy balancer://appcluster> BalancerMember http://127.0.0.1:3001/sample BalancerMember http://127.0.0.1:3002/sample BalancerMember http://127.0.0.1:3003/sample BalancerMember http://127.0.0.1:3004/sample </Proxy> the thin.yml file chdir: /opt/bitnami/projects/sample environment: production address: 127.0.0.1 port: 3000 timeout: 30 log: log/thin.log pid: tmp/pids/thin.pid max_conns: 1024 max_persistent_conns: 512 require: [] wait: 30 servers: 5 prefix: /sample daemonize: true I'm able to start and stop apache, but thin does not stop correctly though. When I try to stop thin, I get this output /opt/bitnami/projects/sample$ sudo thin -C config/thin.yml stop Stopping server on 127.0.0.1:3000 ... Can't stop process, no PID found in tmp/pids/thin.3000.pid Stopping server on 127.0.0.1:3001 ... Can't stop process, no PID found in tmp/pids/thin.3001.pid Stopping server on 127.0.0.1:3002 ... Can't stop process, no PID found in tmp/pids/thin.3002.pid Stopping server on 127.0.0.1:3003 ... Can't stop process, no PID found in tmp/pids/thin.3003.pid Stopping server on 127.0.0.1:3004 ... Can't stop process, no PID found in tmp/pids/thin.3004.pid I've tried to use nginx as well, without any luck unfortunately. Thank you for your time and help!

  Read the article

• Easiest way to do host name resolution with IPA?

  - by Luke

  We are currently using static LAN IP addresses for our internal non-public facing servers. We don't have DHCP configured. We're using Vyatta for our router and firewall. The firewall is configured to be zone based. We want to setup IPA for centralized authentication (LDAP+Kerberos). IPA is requiring resolvable host names. I want to avoid having to enter DNS records by hand. What is the most painless way to make host names resolvable that works with IPA in a Linux only environment? We arn't using anything to resolve host names now. Up until now we've been using static ip addresses and local users on each server. We've looked at BIND, DHCP (does that even solve the problem?), and multicast DNS. At this point we're not sure which solution would work best. Is there another option we haven't considered? Security is very important. We have multiple zones where each zone has very specific or no access to another zone. DNS for public domains is forwarded from Vyatta to our ISP's DNS server.

  Read the article

• Puppet: is it ok to "force" certname when you expect to shuffle nodes around?

  - by Luke404

  We all know (good example on SF) that Puppet hostname detection could be... fun. At our company (and I guess we're not alone at this) we usually pre-configure servers at our offices and test them before bringing the gear to a remote datacenter and rack them. Of course the reverse dns will change when doing that, even if we don't change the actual hostname of the system. We're slowly drafting our puppet setup and I'd like to be sure those moves won't create problems. My idea is to explicitly configure the desired full FQDN of the system as certname in puppet.conf at server provision time (before the very first puppet run). My process would look something like this: basic o.s. installation basic network configuration, enough to reach the internet and resolve dns install puppet and set up certname start puppet and let him manage the whole configuration test, fix problems in config (via puppet), re-test, and so on... manually stop puppet set up new network configuration for the datacenter network move the machine to DC turn it on puppet should automatically start and keep on doing its job The process is supported by detecting the environment in puppet's manifests (eg. based on subnet, like they do at Wikimedia) and modify configuration as needed (eg. resolv.conf contents appropriate for each network). Each node's certname will never change for the whole system life cycle. Is there any problem with this approach? Could it be improved?

  Read the article

• troubleshooting really slow login on a (linux) machine

  - by Peeter Joot

  Within the last couple of weeks, any attempt to login to a specific linux server has gotten really slow. Once I've logged in, things appear to run without significant delay, but some other login like activities (like starting a new screen session) are slow. The machine's been rebooted a couple of times recently and that hasn't helped. , and it doesn't appear to be $PATH search (where $PATH can sometimes include bad NFS mounts), which I've seen historically in our environment. I've also tried completely removing my .profile/.bash*/... type of init files to rule out anything bad there. I also see slow login for at least one other userid on the system. One thing I've noticed is the following message when trying to exit from a screen terminal: Utmp slot not found -> not removed and am wondering if this is related (having a vague recollection that Utmp has something to do with login). Any idea what that message means, or how to fix it, and if it would be related? Failing that, what sort of problem determination tools are available to investigate what is slowing down this login process?

  Read the article

• Is Ubuntu a bad distro for a standalone mysql database server?

  - by DhruvPathak

  I read an article here : http://www.mysqlperformanceblog.com/2011/12/08/which-linux-distribution-for-mysql-server/ On the other end there are Debian and Ubuntu. Both use tool called dpkg for package management. There isn’t a month that I log in to a system based on either distribution where there are no issues with packages consistency. Unfinished installations, unresolved conflicts are so common that it’s just beyond simple negligence. The packaging system is just not robust enough. Another problem is that one broken package may block you from installing or uninstalling anything else. Imagine that someone left system in such shape, you prepared for downtime, stopped MySQL and… error – text editor has not been properly installed, so you cannot upgrade MySQL either until the problem is fixed. In a stressful situation when downtime clock ticks – annoying at best We prefer Ubuntu server because of familiarity and Ubuntu also being development environment. Questions: Is Ubuntu used commonly in production for a mysql database server ? Is it worth the trouble ever to have one distro eg Ubuntu in web server, and another say Red Hat in database server ? Or Is a homogenous server pool a better choice ?

  Read the article

• Logging Remote Server Access via Remote Desktop

  - by Nate Bross

  The objective here is to start a simple .NET application I've written which captures some environment variables (time, username, computername, etc) upon login. This .NET application subscribes to the Windows "User logout" event. Upon launch, the application captures the above variables, and creates a record in my database, upon logout (which I'm capturing) I update another field in the same record, with the logout time. The above is working exactly as I would like, when I launch the binary, it makes its initial log entry, then waits for the logout event and updates the same record. Restrictions, the .NET binary should be able to live on a share point (\server\share\myapp\v1) so I can update the application to (\server\share\myapp\v2) and simply update the GPO/Logon script. My initial thought was to use the \domaincontroller\sysvol\ directory to store the binary and then update all user accounts to include a call to my application. Can you see any flaws in this approach? My question is this: First, is there anything wrong with my idea above? Second, if so, what is the best way (through group policy or otherwise) to ensure this application launches whenever a session is started on a server?

  Read the article

• Hostname vs webpage domain.

  - by Mark

  Hi All, Im just starting to look at deploying a webpage and get into the joy of DNS etc. And im wondering how you set up multiple web-servers all with thier own hostnames/public IP addresses, and yet have them serve up a webpage from one domain. For example, lets say you have a website example.com, and an A record in DNS that points at it's IP address of 1.2.3.4 . You want to have two servers, prod1 and prod2 with some kind of load balancer in front of them for fail over reasons. The way I see it you would want to have the hostnames of these servers as prod1.example.com and prod2.example.com and perhaps loadb.example.com. How would you set up the DNS so this would all work. ie you could ssh to any of the server domains, prod1.example.com, prod2.example.com or loadb.example.com and also just use the www.example.com url to go to the website. And would all these server names be resolvable from the public internet and is that safe? This would be a linux environment, for arguments sake ubuntu, a django framework dynamic website, running in apache 2.2 Cheers Mark

  Read the article

• Why is my global security group being filtered out of my logon token?

  - by Jay Michaud

  While investigating the effects of filtered tokens on my file permissions, I noticed that one of my global security groups is being filtered in addition to the regular system-defined filtered groups. My Active Directory environment is a single-domain forest on the Windows Server 2003 functional level. I'll call the domain "mydomain.example.com". I am logged onto a Windows Server 2008 Enterprise Edition machine (not a domain controller) as a member of the "MYDOMAIN\Domain Admins" group and the "MYDOMAIN\MySecurityGroup" global security group (among others). When I run "whoami /groups" from an elevated command prompt, I see the full list of groups to which my account belongs as expected. When I run "whoami /groups" from a regular, non-elevated command prompt, I see the same list of groups, but the following groups are described as "Group used for deny only". BUILTIN\Administrators MYDOMAIN\Schema Admins MYDOMAIN\Offer Remote Assistance Helpers MYDOMAIN\MySecurityGroup Numbers 1 through 3 above are expected based on Microsoft documentation; number 4 is not. The "MYDOMAIN\MySecurityGroup" global security group is a group that I created. It contains three non-built-in global security groups, and these security groups contain only non-built-in user accounts. (That is, I created all of the accounts and groups that are members of the "MYDOMAIN\MySecurityGroup" global security group.) There are other, similar groups of which my account is a member that are not being filtered out of my logon token, and this group is not granted any specific user rights in the security settings of this computer or in Group Policy. What would cause this one group to be filtered out of my logon token?

  Read the article

• Is there a way to log commands that a user runs in Windows 7?

  - by camster342

  I manage a large enterprise environment, and while we try to advise users not to, there are inevitably users that need to have local admin access to their machines. The problem is that some of these users like to "fiddle" and sometimes screw up their machines in "wonderful" ways. Is there an easy way to log what a user does on a machine, specifically in the command prompt? Maybe there is 3rd party tools I could use to log this information? With Linux that I used to use in past ages, you could look at a users bash history file to see what commands they have run. While I realise that specific log could also be altered by the user if they wanted to cover their tracks, that is the sort of log I'm looking for. If there are other ways I can also log what other system configuration type changes they make as well (not necessarily command line based), that's also useful. I know about event/system logs and so on, but that doesn't necessarily catch all the information I need to figure out how the user has buggered their machine this time.

  Read the article

• suPHP not working

  - by amarc

  OS: Ubuntu 10.04 etc/suphp/suphp.conf: [global] ;Path to logfile logfile=/var/log/suphp/suphp.log ;Loglevel loglevel=info ;User Apache is running as webserver_user=www-data ;Path all scripts have to be in docroot=/home ;Path to chroot() to before executing script ;chroot=/mychroot ; Security options allow_file_group_writeable=false allow_file_others_writeable=false allow_directory_group_writeable=false allow_directory_others_writeable=false ;Check wheter script is within DOCUMENT_ROOT check_vhost_docroot=true ;Send minor error messages to browser errors_to_browser=false ;PATH environment variable env_path=/bin:/usr/bin ;Umask to set, specify in octal notation umask=0077 ; Minimum UID min_uid=100 ; Minimum GID min_gid=100 [handlers] ;Handler for php-scripts application/x-httpd-suphp="php:/usr/bin/php-cgi" ;Handler for CGI-scripts x-suphp-cgi="execute:!self" some vhost in sites-enabled: NameVirtualHost *:8080 <VirtualHost *:8080> ServerAdmin ... ServerName ... ServerAlias ... AddType application/x-httpd-php .php AddHandler application/x-httpd-php .php suPHP_Engine on suPHP_UserGroup user user suPHP_ConfigPath "/home/user/etc" suPHP_PHPPath /usr/bin DocumentRoot /home/user/web/site.com/ ErrorLog /var/log/apache2/site.com-error_log CustomLog /var/log/apache2/site.com-access_log common <Directory /home/user/web/site.com/> Order Deny,Allow Allow from all Options +Indexes </Directory> </VirtualHost> But when I did nano /home/user/web/id.php and paste <?php system('id'); ?> in it, result I get is: uid=33(www-data) gid=33(www-data) groups=33(www-data) Have no idea what to do so I was hoping comunity could help ty.

  Read the article

• Kerberos issues after new server of same name joined to domain

  - by MentalBlock

  Environment: Windows Server 2012, 2 Domain Controllers, 1 domain. A server called Sharepoint1 was joined to the domain (running Sharepoint 2013 using NTLM). The fresh install for Sharepoint1 (OS and Sharepoint) is performed and set up for Kerberos and joined to the domain using the same name. Two SPNs added for HTTP/sharepoint1 and HTTP/sharepoint1.somedomain.net for account SPFarm. Active Directory shows a single, non-duplicate computer account with a create date of the first server and a modify date of the second server creation. A separate server also on the domain has the server added to All Servers in Server Manager. This server shows a local error in the events exactly like This from Technet (Kerberos error 4 - KRB_AP_ERR_MODIFIED). Question: Can someone help me understand if the problem is: The computer account is still the old account and causing a Kerberos ticket mismatch (granted some housekeeping in AD might have prevented this) (In my limited understanding of Kerberos and SPNs) that the SPFarm account used for the SPNs is somehow mismatched with HTTP calls made by the remote server management tools services in Windows Server 2012 Something completely different? I am leaning towards the first one, since I tested the same SPNs on another server and it didn't seem to cause the same issue. If this is the case, can it be easily and safely repaired? Is there a proper way to either reset the account or better yet, delete and re-add the account? Although it sounds simple enough with some powershell or clicking around in AD Users and Computers, I am uncertain what impact this might have on an existing server, particularly one running SharePoint. What is the safest and simplest way to proceed? Thanks!

  Read the article

• crontab not running on VirtualBox unless I'm logged in

  - by Mike

  I am running Ubuntu Server 9.04 in VirtualBox on my work PC as a development environment. I have some scripts that I've put in my user's crontab that run throughout the day while I'm SSHed into the VM. Last night, I closed PuTTy and all of my other running applications (except for VirtualBox and the VM) and went home. I came back this morning to discover that my cron jobs didn't run at all, yet when I SSHed into the VM, the next scheduled job ran. I set the schedule to 5min to test, disconnected again, and the jobs stopped running on schedule. They seem to only run if I'm logged in to the machine. Obviously, I want them to run on schedule even if I'm not logged in to the VM, otherwise there's no point. Is there something I've failed to configure correctly? New Information: There are now 3 entries in /var/log/cron.log saying the following "Mount of private directory return code [256]"... the entries correspond to when the cron job is supposed to run. I thought they are supposed to run as my userid? Why would my own userid be unable to run a script in my home directory?

  Read the article

• Cannot ssh into server

  - by revolver

  I am trying to SSH into a linux machine running ubuntu, but the interactive shell stuck somewhere and I can't key in anything. I am on Mac OS X Lion. This only happens when I am trying to access via an external IP. Local LAN SSH is working perfectly. macbook:~ user$ ssh -v -v user@serverip // i skipped the rest of the log, but I can paste it here again if needed. Authenticated to serverip debug1: channel 0: new [client-session] debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug1: Sending env LC_CTYPE = UTF-8 debug2: channel 0: request env confirm 0 debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 My terminal shell just hang after this, and I can't key in anything. I checked var/log/auth on the server and saw that the a session is being created and I had already logged in, but I don't see any responses on my client machine. I googled around and a lot of the solution had to do with the Broadcom wireless driver, but I am not even using one, so I am pretty clueless here. To give you more information, the linux machine is also running a web server, and I have no problem accessing the web server. Thanks. Any help is appreciated.

  Read the article

• Exchange 2010 SP2 database size

  - by Chad

  I have a single Exchange 2010 sp2 environment with 3 DB stores. I am trying to reduce the sizes by moving the mailboxes to a spare DB and then deleting the empty database. I cleaned up the users mailboxes to reduce the sizes and set the retention periods to 1 day each and waited several days before moving mailboxes. The databases are backing up fine and clearing logs files but when I move the mailboxes I noticed they were taking a long time, even though some were less than 100MB. When I checked the new database size it seems like the orginal mailbox size might be moving (1GB instead of 100MB). Exchange is showing the expected smaller mailbox sizes when I run get-mailbox statistics against the DB. So if I have 5 mailboxes 100MB each it is showing like 3GB instead of around 500MB, and no whitespace. I keep waiting thinking mailby the retention period is not expired yet but it is much longer than 1 day already. I am setting them both to 0 today to see if that works. What am I missing to get the combined mailbox sizes to match the DB size minus whitespace?

  Read the article

< Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >