Search Results

Search found 19446 results on 778 pages for 'network printer'.

Page 348/778 | < Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >

  • Windows 7 and XP Networking

    - by David-Zazeski
    I'm trying to setup a home network between a windows 7 and windows xp machine. I have a small hub. My XP computer has a manually assigned IP address (192.168.0.10) and I set my Windows 7 machine to have a manually assigned IP address (192.168.0.15). The XP computer works, but the Windows 7 machine does not see the network. It says that there is no connectivity. Ping does not work from either machine. Does anyone have any suggestions?

    Read the article

  • Debugging IO limitation

    - by Martin F
    I have a Fedora box with some severe IO limitations which I have no idea how to debug. The server has a Areca Technology Corp. ARC-1130 12-Port PCI-X to SATA RAID Controller with 12 7200 RPM 1.5 TB disks and a Marvell Technology Group Ltd. 88E8050 PCI-E ASF Gigabit Ethernet Controller. uname -a output: 2.6.32.11-99.fc12.x86_64 #1 SMP Mon Apr 5 19:59:38 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux The server is a file server running Nginx with the stub status module enabled, so I can see the current amount of connections. The problem present itself when I have a high number of simultaneous connections in a writing state. Usually around 350, at this very moment it's at 590 and the server is almost unusable and stuck at 230mbit/s. If I run stop and hit 1 to see CPU core usages I have all 4 cores with around 99% io wait, if I run iotop the nginx workers are the only processes producing any read load, currently at around 25MB/s. I have each of the workers bound to their own core. Initially I figured it was just the disks being bugged. But I've run fscheck and smartmontools checks and found no errors. I also ran an iozone test which you can see the result of here: http://www.pastie.org/951667.txt?key=fimcvljulnuqy2dcdxa Additionally, when the amount of connections are low I have no problem getting a good speed. If I wget over the local network it easily hits 60MB/sec. Right now I just tried putting a file in /dev/shm, then I symlinked a file from the public dir to it and used wget over the local network and only got 50KB/s. Also, if I try to cp /dev/shm/test /root/test it quickly copies around 740MB and then slows down HEAVILY. Again with iotop reporting 99% iowait. I'm not really sure how to go about figuring out what the problems are. It could be a natural disk limitation but then the file from /dev/shm ought to transfer so it seems there's a network limit, but that's fine when there's not many connections. Perhaps it's a TCP stack problem but I really have no idea how to check that. Any suggestions on how to proceed with debugging would be very welcome. If additional information is required then let me know and I'll try to get it. Thanks.

    Read the article

  • how to connect virtual box os and local machine

    - by Nrew
    This question is in connection to this question asked by a user before: http://superuser.com/questions/73470/virtualbox-vdi-file-to-vmware On how to convert vdi to vmdk or vmx using vmware converter. How do I connect the windows xp that is in virtual box to the local computer (windows 7) in a network. Because I got this error while I tried following this instruction: Give the IP address, username and password of the remote machine that you would like to convert and then hit next I got this error in vmware converter: Unable to connect the specified host 10.0.2.15 which is the ip address of the xp machine inside virtual box. It also said that there is a network configuration problem. And when I inputted the ip address from whatismyip.com which should be the same as the ip address on local machine. I didn't get the previous error but I got another one, it said that: insufficient permissions to connect to "ip address" What solution can you suggest for this problem?

    Read the article

  • Lan, vpn on Amazon EC2, how to?

    The problem is as follows: I have 2 windows2003 server instances running on the cloud. 1) How can I create a local area network from these 2 instances? 2) Assuming that I want to create a VPN network from these 2 instances, how do I do that? (I'm not very good in networking, therefor the above problem description might be incomplete or not very clear.) A detailed answer or clarification would be praised and appreciated! What I tried: 1) Setting up OpenVPN, but I got lost in the process. 2) Creating a VPN from windows2003 server in the following manner: on instance a): set up a dhcp server; set up an "accept income vpn" connection; with the followin tcp ip settings: obtain an ip from the dhcp server; on instance b): created a new vpn connection, tried to connect to intance A, using the instance A static IP but error 806 was thrown, something relate to a GRE protocol.

    Read the article

  • Would it be smarter to setup a Linux development server at home, or to use a hosted server?

    - by markle976
    I am in the process of learning as much as I can about LAMP. I was wondering if I should set a web server on my home network, or use a service like Rackspace (cloud space)? I need to have root access, to be able to access it remotely via SSH/FTP/HTTP, and to be able to install things like subversion, etc. I currently have Comcast so I have plenty of bandwidth, but I am not sure if this would violate the TOS, and/or compromise the security of my home network. Pricing for these cloud hosts, seems reasonable ($11 per month plus about $0.10 per GB of bandwidth), but I am not sure if I will have to control I am looking for.

    Read the article

  • VGA monitor won't detect on NVIDIA Quadro NVS 4200M

    - by tanmayk
    I am on a Dell Latitude E6420 and just installed 12.04. When I plug in my external monitor's VGA cable, the laptop doesn't detect any new monitor. Here's the output of my lspci: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [Quadro NVS 4200M] (rev a1) 01:00.1 Audio device: NVIDIA Corporation HDMI Audio stub (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 0b:00.0 SD Host controller: O2 Micro, Inc. Device 8221 (rev 05) 0b:00.1 Mass storage controller: O2 Micro, Inc. Device 8231 (rev 03) I tried installing the Quadro NVS 4200M from the nvidia website but got stuck in TTY after the installation finished. Any ideas as to how I can get the external monitor to work? Thanks!

    Read the article

  • Facebook Stories for Retailers

    - by David Dorf
    Getting people to "like" a brand is important because it opens the door to a possible B2C relationship. Once a person likes that brand, the brand can post to their newsfeed with promotions, announcements, and surveys. At least for me, I "hide" the noisy brands and just monitor the ones that keep posts under 4 times a week. I see lots of people, especially with fashion brands, comment on postings at which point the posting is seen by their network. A metric I've heard (but not verified) is that for every person that comments, ten of their friends see the original posting. That's a pretty cheap way to communicate to potential customers in a viral way. Over at mainstreet.com they compiled the a list of the top liked retailers on Facebook as of Feb 1, 2011. They are listed below: 19,414,892 Starbucks 11,302,939 Victoria's Secret 7,925,184 Zara 7,032,398 McDonald's 6,117,222 H&M 5,400,586 Taco Bell 4,665,760 Subway 4,494,849 Lacoste 4,185,570 Hollister 3,973,181 Forever 21 So I guess the public likes their fast-food and fashion. To take this to the next level, Facebook is now displaying Sponsored Stories, which I saw for the first time on my page this weekend. I found this picture at the Wall Blog that depicits Sponsored Stories very well. Over on the right-hand column of a person's page, where they see advertisements and such, Facebook will post stories involving their network of friends and their interaction with sponsored brands. Now their "likes" can suddenly become your ads. "Jessica and Philip like Starbucks. What are you waiting for?" This is another great way to take messages viral by accessing social graphs. As usual there will be a certain level of outcry from privacy advocates, but given the other more iniquitous issues, I believe this will fall by the wayside. Retailers should consider using Sponsored Stories to increase their Likes, and thus increase their voice in the social world.

    Read the article

  • Windows 7 Internet Sharing - How to have simultaneous Internet Access to my client

    - by Marl
    The condition: I'm running on windows 7, I'm using a usb broad band for my computer, then my computer is connected to the router tp-link tl-wr340g (in this sense my computer is the internet source since my router has no usb port for this type of broad band). I set the broad band to have internet sharing. I got 3-4 client connected through the router. The problem is whenever a client is using the internet, other clients including me don't have internet connection, additionally, If I have the internet access other clients don't have internet access. In my setup in windows XP (bridging the broad band and the router network) it works perfectly fine, every one has simultaneous internet. To clarify, how can I have all clients including me have internet connection simultaneously in my windows 7 OS? //Additionally, the create "network bridge" setup is missing, from this link the "Bridge Connection is missing", how can I fix that?

    Read the article

  • how to access locally deployed webapp on ipodtouch ?

    - by abhinav
    Hi, I have a wifi network at home with a couple of laptops. I am running a Tapestry webapp on my machine. I can access this webapp from the other laptop if I use the IP address of my machine (I mean enter something like : http://192.168.1.53:8080/webapp/index.html). Now, I also want to access the same webapp through my iPodTouch which is also in this wifi network. However, when I try to do so in Safari on iPodTouch, it fails. Could someone point out what's the problem here ? Thanks, Abhinav

    Read the article

  • How can I access shared XP files over wifi with an Archos 5 Internet Tablet with Android?

    - by Fred
    I have an Archos 5 Internet tablet with Android. I have been using it to stream video over my XP wifi network. Yesterday the Archos stopped seeing any of my computers. I have found some programs that allow me to see the network, so I know the hardware works. However, this program does not allow me to pick the correct program to play the files I want. I suspect the problem lies somewhere on the XP side. This would probably work better if the Archos 5 allowed me to manually input the IP address. Help?

    Read the article

  • How can I access shared XP files over wifi with an Archos 5 Internet Tablet with Android?

    - by Fred
    I have an Archos 5 Internet tablet with Android. I have been using it to stream video over my XP wifi network. Yesterday the Archos stopped seeing any of my computers. I have found some programs that allow me to see the network, so I know the hardware works. However, this program does not allow me to pick the correct program to play the files I want. I suspect the problem lies somewhere on the XP side. This would probably work better if the Archos 5 allowed me to manually input the IP address. Help?

    Read the article

  • How to copy files from shadow copy with long source path

    - by Jake
    The files and folders in my shared network drive (set up with DFS) were mass deleted. Currently I am trying to recover the files from the shadow copy "Previous Version". Problem is, thousands of files are deeply nested with long paths making the file path too long. When copying, it shows the dialog "Source Path Too Long". My guess is that the file path just barely hits the limit when saved into the network drive, but shadaw copy service appends the date and time to the folders so the path character limit is exceeded. How else can I copy the files from shadow copy?

    Read the article

  • NAS disk - problem with accessing SAMBA

    - by dominolog
    Hello I have a NAS disk running on some version of Linux. The disk is located in local network (5 PC running XP or Vista, all connected to Linksys Router). I have problems accessing NAS resources through SAMBA. The 1st issue is that the NAS is not accessible through hostname (even if it is configured), 2nd point is that it is mostly not accessible through IP manner (\IP_OF_NAS). Rest of services (FTP, HTTP access) works flawlessly. I connected the NAS to my home network (only 1 WinXP and Linsys router) and the NAS is working fine - SAMBA access together with hostname recognition works perfectly. I wonder this is an issue with WINS? Could anybody help? Regards

    Read the article

  • Windows clients not using NTP server provided via DHCP

    - by gencha
    I have a network consisting mostly of Windows Vista and 7 clients and an Ubuntu server. The server provides both the DHCP and NTP services through dhcp3-server and openntpd. In my dhcpd.conf, the subnet is declared as follows: subnet 10.10.10.0 netmask 255.255.255.0 { range 10.10.10.10 10.10.10.200; option broadcast-address 10.10.10.255; option routers 10.10.10.1; option ntp-servers 10.10.10.1; } The clients don't seem to be using the NTP server though. When I capture the network traffic with Wireshark during the DHCP process, I also see no mention of the NTP option in the DHCP offer message. I am not quite sure if the clients would have to specifically request that option to receive it or if I have to make another configuration to offer the option.

    Read the article

  • Newbie one: Virtual Networks - Hyper-V - Remote Destktop - Only one phisical NIC

    - by josecortesp
    Hello everyone, I'll try to explain my situation and I'll apreciate any help: I have a phisical server (quad core, 4Gb ram, 1TB raid 10, etc) with Win Server 2008 R2 enterprise, running IIS, Printing, etc... Also, I want to set up 2 virtual Servers with 2008 R2 standart one with SQL Server and the other with Team Foundation. What i need is: Being able to access from inside the private phisical network, to Remote Desktops on each of the Virtual and the phisical Servers Had Access from the outside, using a router and port Forwarding, to the TFS server and the IIS server (one is virtualized, the other is phisical) This is it, but note that I only have one Phisical Nic. How do I configure this to work. When i set up the hyper-v role, on the wizard something like it showed up but I don't remmember what i choose, and right now, I cannot access none of the servers from remote desktop, not even from the phisical private network. Can anybody point me, what can i do? Thanks in advance (sorry 4 my english, i'm a spanish talker and my english isn't that good)

    Read the article

  • networking tunnel adapter connections?

    - by Karthik Balaguru
    I understand that Tunnel Adapter LAN is for encapsulating IPv6 packets with an IPv4 header so that they can be sent across an IPv4 network. Few queries popped up in my mind based on this :- If i do 'ipconfig', Apart from ethernet adapter LAN details, I get a series of statments as below - Tunnel adapter Local Area Connection* 6 Tunnel adapter Local Area Connection* 7 Tunnel adapter Local Area Connection* 12 Tunnel adapter Local Area Connection* 13 Tunnel adapter Local Area Connection* 14 Tunnel adapter Local Area Connection* 15 Tunnel adapter Local Area Connection* 16 Except for the *16, all the other Tunnel Adapter Local Area Connections show Media Disconnected. Why is the numbering for the Tunnel adapter LAN not sequential? It is like 6, 7, 12, 13, 14, 15, 16. A strange numbering scheme! I tried to figure it out by thinking of some arithmetic series. But, it does not seem to fit in. There is a huge gap between 7 and 12. Any ideas? What is the need for so many Tunnel Adapter LAN connections? Can you tell me a scenario that requires all of those ? I did ipconfig /all to get more information. From the listing, I understand that: 16, 15, 14, 12 are Microsoft 6to4 Adapters 13, 6 are isatap Adapters 7 is Teredo Tunneling Pseudo-interface I understand that the above are for automatic tunneling so that the tunnel endpoints are determined automatically by the routing infrastructure. 6to4 is recommended by RFC3056 for automatic tunneling that uses protocol 41 for encapsulation. It is typically used when an end-user wants to connect to the IPv6 Internet using their existing IPv4 connection. Teredo is an automatic tunneling technique that uses UDP encapsulation across multiple NATs. That is, It is to grant IPv6 connectivity to nodes that are located behind IPv6-unaware NAT devices ISATAP treats the IPv4 network as a virtual IPv6 local link, with mappings from each IPv4 address to a link-local IPv6 address. That is to transmit IPv6 packets between dual-stack nodes on top of an IPv4 network. That is, to put in simple words, ISATAP is an intra-site mechanism, while the 6to4 and Teredo are for inter-site tunnelling mechanisms. It seems that Teredo should alone enabled by default in Vista, But my system does not show it to be enabled by default. Interestingly, it shows a 6to4 tunnel adapter (Tunnel adapter LAN connection 16) to be enabled by default? Any specific reasons for it? If i do ipconfig /all, why is only one Teredo present while four 6to4 are present ? I searched the internet for answers to the above queries, but I am unable to find clear answers.

    Read the article

  • Slash Notation IP - What is what?

    - by Nirmal
    We just signed up with a new ISP and we got a static IP from them. Our previous ISP just gave one IP and we were able to configure our web server using that. Now, we have got this new IP with a slash notation. This type is new to me. When I used the CIDR calculator, it gave me the following results: 202.184.7.52/30 IP: 202.184.7.52 Netmask: 255.255.255.252 Number of hosts: 2 Network address: 202.184.7.52 Broadcast address: 202.184.7.55 Can someone please help me by explaining what these are? I could not understand what the number of hosts means. Is that telling that I can use two different IP for DNS (A) records? Also, which one should I setup in my router? The network address or broadcast address? Thank you very much for any answer you may provide.

    Read the article

  • Oracle Database 12c is Generally Available

    - by Thanos
    Oracle Database 12c, a major release of Oracle’s flagship product, is generally available as of 25 June 2013. Oracle Database 12c introduces a breakthrough, new multitenant architecture enabling customers to create multiple, pluggable databases for database consolidation and cloud deployments. Customers will realize greater efficiency and flexibility through innovations such as Oracle Multitenant option and Automatic Data Optimization with Heat Map, for compressing and tiering data at a higher density. These unique advancements, combined with major enhancements in availability, security, and big data support, make Oracle Database 12c the ideal platform for private and public cloud deployments. As of 25/06/2013, the product is available for download on Linux x86-64, Solaris Sparc64 and Solaris (x86-64) via Oracle Technology Network. A news release is planned for July 1st, and an external launch webcast, Plug into the Cloud with Oracle Database 12c, featuring Mark Hurd, Andy Mendelsohn, Tom Kyte and other experts is planned for July 10th. Open here in New Window Everybody can register for the launch webcast here and register to attend global in-person events here. Resources: www.oracle.com/database www.oracle.com/databaseoptions Oracle Partner Network Database Knowledge Zone Open in Google Docs Viewer Open link in new tab Open link in new window Open link in new incognito window Download file Copy link address Edit PDF File on PDFescape.com

    Read the article

  • Snow Leopard: Optimization

    - by Shyam
    Hi, I have bunch of questions: I have a Mac network, which has five Mac's. Right now, they are individually getting software updates. Is there a way to download the patches/security updates in a single place (repository) and point all machines to this location? Personally, I have tools like Monolingual and Onyx, but are there tools you could recommend that affect the performance of the Operating System positively? Tweaks would be nice. Links and pointers, would be really appreciated. I've read about Time machine, is there a way to backup all machines to a network drive using this tool? Thanks!

    Read the article

  • Oracle VM 3: New Patch Set! (or Mega Millions winner?...you decide!..)

    - by Adam Hawley
    Today, my favorite number is 14736185 (despite the fact that it did not win me $249million in the MegaMillions lottery...or did it?)!  Why?  Because it is our latest patch release and it is chock-full of good stuff for the Oracle VM 3.0 user.  Oracle VM support customers can find it on My Oracle Support as patch number 14736185.   This can be installed on Oracle VM 3.0.x systems as an incremental patch on top of 3.0.3, so if you previously ran 3.0.3 GA or updated to 3.0.3 patch 1 ( build 150) this will just apply on top.  We're recommending you update to this patch set at your earliest convenience.  For more details, see below but also see Wim Coekaert's blog with related info here. Oracle VM Manager Update Instructions Oracle VM Manager 3.0.2 or 3.0.3 can be upgraded to this Oracle VM Manager 3.0.3 patch update. Unzip the patch file on the server running Oracle VM Manager and execute the runUpgrader.sh script. # ./runUpgrader.sh Please refer to Oracle VM Installation and Upgrade Guide for details. Upgrade Oracle VM Servers It's highly recommended to update Oracle VM Server 3.0.3 with the latest patch update. Please review Oracle VM 3.0.3 User Guide http://docs.oracle.com/cd/E26996_01/e18549/BABDDEGC.html for specific instructions how to use Yum repository to perform the server update. To receive notification on the software update delivered to Oracle Unbreakable Linux Network (ULN, http://linux.oracle.com) for Oracle VM, you can sign up here http://oss.oracle.com/mailman/listinfo/oraclevm-errata.  Additional Information Oracle VM documentation is available on the Oracle Technology Network (OTN):http://www.oracle.com/technetwork/server-storage/vm/documentation/index.html  Please refer to the Oracle VM 3.0.3 Release Notes for a list of features and known issues. For the latest information, best practices white papers and webinars, please visit http://oracle.com/virtualization

    Read the article

  • Corporate Wiki Organization - Technical Documentation

    - by Dave Jarvis
    Corporations have documents describing various aspects of their technical systems, including: Custom Applications Custom Development Frameworks Third Party Applications Accounting Bug Tracking Network Management How To Guides User Manuals Software Tools Web Browsers Development IDEs Graphics GIMP xv Text Editing File Transfer ncFTP WinSCP Hardware Servers Web Database Exchange File Network Devices Printers If you had to use a Wiki to manage the documentation, what other items would you add to the list, and how would you organize it? (For example, would Software Tools make more sense under Third Party Applications?) A few constraints: The structure should not go beyond three levels deep. Avoid the word "and" in favour of two different categories. Keep the structure general: it should appy as broadly as possible. Target audience is primarily technical, but could be visible by anyone.

    Read the article

  • Virtual NIC on VM couldn't ping externally after Vmotion

    - by ToreTrygg
    Today I vmotioned 5 MS SQL 2005 servers over to a new DRS Cluster. All SQL servers use the "Production_LAN" network and a single virtual NIC of type "VMXNET 3". The first 4 SQL VM (Windows 2003 Standard or Enterprise x32 bit) vmotioned over without a hitch. The last SQL VM I vmotioned (Windows 2003 Standard x64 bit R2) vmotioned over without error, but I upon completion, I could no longer ping the VM. I went into the VM and could not even ping the gateway, however I could ping the loopback. This SQL server is extremely busy in comparison with the previous 4 VM's. I restarted the server and it came back up with the virtual nic working just fine. The build of both servers (vmotioner and vmotionee) is ESX 4.0.0 175625 - So, pre-update 1. Should I suspect the network switch/VM for possibly not updating the mac table on the switch? Anybody else ever have this issue or know what may have caused it? Thank you!

    Read the article

  • ArchBeat Link-o-Rama for 11/11/2011

    - by Bob Rhubart
    3 SOA business cases, explained in a 2-minute elevator speech | Joe McKendrick Impress your CEO — maybe even the CFO — with some quick examples of SOA making a difference to the business. ADF Faces - a logic bomb in the order of bean instantiations | Chris Muir Oracle ACE Director Chris Muir shares the details on "an interesting ADF logic bomb" discovered by one of his colleagues. 5 key trends in cloud computing's future | David Linthicum "'Cloud computing' will become just 'computing' at some point," says Linthicum, "but it will still be around as an approach to computing." What's New with XBRL? | John O'Rourke John O'Rourke shares highlights and key take-aways from the XBRL US Conference in Nashville and the XBRL International Conference in Montreal. Siri-ous Business: Enterprise Apps and Global UX Considerations | Ultan O'Broin Ultan O'Broin ponders "the enterprise applications user experience (UX) implications of Siri" and "the global UX aspects to the Siri potential." These are 11 of my favorite things! | Mike Gerdts Gerdts introduces his 11 favorite things about zones in Solaris 11. The Power of Social Recommendations | Peter Reiser "Do you really want to invest to drive YOUR audience trough public social networks," asks Reiser, "or do you want to have YOUR audience on your own social network which is seamless integrated with your web properties and business applications." Fourth Key Attribute of Cloud Computing - Provisioning | Tom Laszewski "Self-service provisioning of computing infrastructure in a cloud infrastructure is also very desirable as it can cut down the time it takes to deploy new infrastructure for a new application or scale up/down infrastructure for an existing application," says Tom Laszewski. Oracle Utilities Application Framework Whitepaper List as of November 2011 | Anthony Shorten Anthony Shorten shares an updated and nicely detailed list of Oracle Utilities Application Framework white papers. Down from the Tower; Information Integration Conversation; By the Time the Architects get to Phoenix This week on the Oracle Technology Network Architect Home Page.

    Read the article

  • How can I permanently remove default root hints from a Server 2008 DNS server?

    - by TonyD
    My network exists in private address space and I am unable to perform DNS lookups against DNS servers on the internet directly (blocked by firewall). There are other networks that exist in the same private address space as my network. I need to be able to perform DNS lookups for devices in these networks as well. There are 2 main internal DNS servers in this private address space, but not on my netowrk. I can perform DNS lookups against both of these servers for devices internal to our address space and names on the internet. I would like to permanently remove the root hints from our Server 2008 R2 DNS server and replace them with these 2 internal DNS servers. I have removed them from the dnsmgmt console, the C:\Windows\System32\DNS\cache.dns file, and from the RootDNSServers folder under the System folder in ADUC. Even so, they continue to repopulate into the root hints tab in the server properties for DNS after roughly an hour. Does anyone know how to permanently remove these entries?

    Read the article

< Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >