Search Results

Search found 21640 results on 866 pages for 'local storage'.

Page 349/866 | < Previous Page | 345 346 347 348 349 350 351 352 353 354 355 356  | Next Page >

  • How do I host node.js apps with pm2 without running them as root?

    - by jishi
    I have setup pm2 to run a node.js application, and I can successfully start it and it will resurrect upon reboot. However, the pm2 daemon is ran as root, which makes me think that all my node-scripts also runs as root? Even though I added them as a regular user in the system. The log files and stuff is created in the users home dir, /~/.pm2/logs, but the logs are owned by root. when I invoke pm2 startup (which handles the installation of the init.d script etc), it creates /etc/init.d/pm2-init.sh which looks like this: #!/bin/bash # chkconfig: 2345 98 02 # # description: PM2 next gen process manager for Node.js # processname: pm2 # ### BEGIN INIT INFO # Provides: pm2 # Required-Start: # Required-Stop: # Should-Start: # Should-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: PM2 init script # Description: PM2 is the next gen process manager for Node.js ### END INIT INFO NAME=pm2 PM2=/usr/local/lib/node_modules/pm2/bin/pm2 NODE=/usr/local/bin/node export HOME="/root" start() { echo "Starting $NAME" $NODE $PM2 stopAll $NODE $PM2 resurrect } stop() { $NODE $PM2 dump $NODE $PM2 stopAll } restart() { echo "Restarting $NAME" stop start } status() { echo "Status for $NAME:" $NODE $PM2 list RETVAL=$? } case "$1" in start) start ;; stop) stop ;; status) status ;; restart) restart ;; *) echo "Usage: {start|stop|status|restart}" exit 1 ;; esac exit $RETVAL When I dump the processes (which is what it will use when resurrecting the processes), I see mentions of user "USER":"pi" but I don't think that it's actually run as user pi. Any thoughts?

    Read the article

  • How do I stop and repair a RAID 5 array that has failed and has I/O pending?

    - by Ben Hymers
    The short version: I have a failed RAID 5 array which has a bunch of processes hung waiting on I/O operations on it; how can I recover from this? The long version: Yesterday I noticed Samba access was being very sporadic; accessing the server's shares from Windows would randomly lock up explorer completely after clicking on one or two directories. I assumed it was Windows being a pain and left it. Today the problem is the same, so I did a little digging; the first thing I noticed was that running ps aux | grep smbd gives a lot of lines like this: ben 969 0.0 0.2 96088 4128 ? D 18:21 0:00 smbd -F root 1708 0.0 0.2 93468 4748 ? Ss 18:44 0:00 smbd -F root 1711 0.0 0.0 93468 1364 ? S 18:44 0:00 smbd -F ben 3148 0.0 0.2 96052 4160 ? D Mar07 0:00 smbd -F ... There are a lot of processes stuck in the "D" state. Running ps aux | grep " D" shows up some other processes including my nightly backup script, all of which need to access the volume mounted on my RAID array at some point. After some googling, I found that it might be down to the RAID array failing, so I checked /proc/mdstat, which shows this: ben@jack:~$ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdb1[3](F) sdc1[1] sdd1[2] 2930271872 blocks level 5, 64k chunk, algorithm 2 [3/2] [_UU] unused devices: <none> And running mdadm --detail /dev/md0 gives this: ben@jack:~$ sudo mdadm --detail /dev/md0 /dev/md0: Version : 00.90 Creation Time : Sat Oct 31 20:53:10 2009 Raid Level : raid5 Array Size : 2930271872 (2794.53 GiB 3000.60 GB) Used Dev Size : 1465135936 (1397.26 GiB 1500.30 GB) Raid Devices : 3 Total Devices : 3 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Mon Mar 7 03:06:35 2011 State : active, degraded Active Devices : 2 Working Devices : 2 Failed Devices : 1 Spare Devices : 0 Layout : left-symmetric Chunk Size : 64K UUID : f114711a:c770de54:c8276759:b34deaa0 Events : 0.208245 Number Major Minor RaidDevice State 3 8 17 0 faulty spare rebuilding /dev/sdb1 1 8 33 1 active sync /dev/sdc1 2 8 49 2 active sync /dev/sdd1 I believe this says that sdb1 has failed, and so the array is running with two drives out of three 'up'. Some advice I found said to check /var/log/messages for notices of failures, and sure enough there are plenty: ben@jack:~$ grep sdb /var/log/messages ... Mar 7 03:06:35 jack kernel: [4525155.384937] md/raid:md0: read error NOT corrected!! (sector 400644912 on sdb1). Mar 7 03:06:35 jack kernel: [4525155.389686] md/raid:md0: read error not correctable (sector 400644920 on sdb1). Mar 7 03:06:35 jack kernel: [4525155.389686] md/raid:md0: read error not correctable (sector 400644928 on sdb1). Mar 7 03:06:35 jack kernel: [4525155.389688] md/raid:md0: read error not correctable (sector 400644936 on sdb1). Mar 7 03:06:56 jack kernel: [4525176.231603] sd 0:0:1:0: [sdb] Unhandled sense code Mar 7 03:06:56 jack kernel: [4525176.231605] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Mar 7 03:06:56 jack kernel: [4525176.231608] sd 0:0:1:0: [sdb] Sense Key : Medium Error [current] [descriptor] Mar 7 03:06:56 jack kernel: [4525176.231623] sd 0:0:1:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed Mar 7 03:06:56 jack kernel: [4525176.231627] sd 0:0:1:0: [sdb] CDB: Read(10): 28 00 17 e1 5f bf 00 01 00 00 To me it is clear that device sdb has failed, and I need to stop the array, shutdown, replace it, reboot, then repair the array, bring it back up and mount the filesystem. I cannot hot-swap a replacement drive in, and don't want to leave the array running in a degraded state. I believe I am supposed to unmount the filesystem before stopping the array, but that is failing, and that is where I'm stuck now: ben@jack:~$ sudo umount /storage umount: /storage: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) It is indeed busy; there are some 30 or 40 processes waiting on I/O. What should I do? Should I kill all these processes and try again? Is that a wise move when they are 'uninterruptable'? What would happen if I tried to reboot? Please let me know what you think I should do. And please ask if you need any extra information to diagnose the problem or to help!

    Read the article

  • Avoiding DNS timeouts when a dns server fails

    - by user65124
    Hi there. We have a small datacenter with about a hundred hosts pointing to 3 internal dns servers (bind 9). Our problem comes when one of the internal dns servers becomes unavailable. At that point all the clients that point to that server start performing very slowly. The problem seems to be that the stock linux resolver doesn't really have the concept of "failing over" to a different dns server. You can adjust the timeout and number of retries it uses, (and set rotate so it will work through the list), but no matter what settings one uses our services perform much more slowly if a primary dns server becomes unavailable. At the moment this is one of the largest sources of service disruptions for us. My ideal answer would be something like "RTFM: tweak /etc/resolv.conf like this...", but if that's an option I haven't seen it. I was wondering how other folks handled this issue? I can see 3 possible types of solutions: Use linux-ha/Pacemaker and failover ips (so the dns IP VIPs are "always" available). Alas, we don't have a good fencing infrastructure, and without fencing pacemaker doesn't work very well (in my experience Pacemaker lowers availability without fencing). Run a local dns server on each node, and have resolv.conf point to localhost. This would work, but it would give us a lot more services to monitor and manage. Run a local cache on each node. Folks seem to consider nscd "broken", but dnrd seems to have the right feature set: it marks dns servers as up or down, and won't use 'down' dns servers. Any-casting seems to work only at the ip routing level, and depends on route updates for server failure. Multi-casting seemed like it would be a perfect answer, but bind does not support broadcasting or multi-casting, and the docs I could find seem to suggest that multicast dns is more aimed at service discovery and auto-configuration rather than regular dns resolving. Am I missing an obvious solution?

    Read the article

  • User cannot access a system DSN on Windows Server 2008

    - by Ra Osolage
    We run our SQL Server services using a low privileged domain account. That account is NOT a local admin on the OS. Only access I give the user account is assigned during install of SQL: full control over its mount points and then everything else is granted by the SQL Server 2005/2008 installer. I need to create a linked server in SQL Server 2008 to an ODBC data source. So I remoted into the computer using my domain account, which is part of a group that DOES have local admin privs to the OS. I created a system DSN and configured it to connect to another SQL Server. The DSN works perfectly when I test it. However, when I try to create the linked server, I get an error. It appears to me that the DSN is invisible to the domain account that SQL Server is running as. It seems that this problem is only happening to me on Windows 2008 servers. Does anybody know whether there's anything that you need to do after creating a DSN to make it visible for other users to access?

    Read the article

  • Issues with doing a P2V on Exchange 2007

    - by PokermUNKEE
    I shutdown all Exchange services on the physical box and did a convert. Everything converted fine. Server booted up no issues and I could receive email from the outside world with no issues. But I am unable to send emails internally or externally. They just sit in the Outbox. I also disabled the DHCPClient service as I didn't want the server to get an IP address from DHCP when it first came online. It came online with no IP, then I used console to assign the correct static IP address (same one on the physical server) and rebooted. I ran the Exchange Troubleshooting Agent and it gave me the following errors: The value for the '\MSExchangeIS Mailbox\Messages Queued For Submission' counter on server exchange is greater than zero (average value is 8.8) and it appears that 'MSExchangeMailSubmission' is failing to submit messages to at least one computer with the Hub Transport server role installed over the last minute. Found 1 computers with the Hub Transport server role installed in the same Active Directory site as server exchange using local Active Directory site GUID 'ce8a4367-1bf6-4825-9cac-c4e2b115c450'. Check Local Active Directory Site Hub Transport Server Role Health (Mailflow_CheckLocalBhHealth1.1.1.1.1.1.1.1) I have one Exchange server with all the roles on it. Has anyone see this before when doing a convert? Please help :(

    Read the article

  • Debugging UI Problems in IE8 (Was IE8 on Windows 7 Authentication Mess)

    - by alharaka
    UPDATE: I think the real question I need to ask here is: how does a technician debug UI problems with Internet Explorer, and not HTML rendering issues that have pretty good tools? I am aware of the SysInternals tools and others mentioned below, but maybe I am not harnessing their power properly. Someone else in the TechNet forum I mentioned had a similar issue. Again, I have lots of data, I am not sure how to properly interpret it. ORIGINAL POST: So I tried the venerable Technet Forums to solve this isse. In short, the Windows Security dialog has no place to put credentials, rendering pretty much useless. This happens to apply for a whole bunch of our intranet websites, and only a select number of users with a few laptops have this problem. It ends up looking like this. Things I have tried so far: Disabling local Group Policy (not domain connected) Disabling local Security Policy Resetting IE settings A few system restores Re-registering a bunch of IE DLL's and all other steps here Reinstalling IE8 (dism /online /disable-feature /featurename:"internet-explorer-optional-x86, reboot, dism /online /enable-feature /featurename:"internet-explorer-optional-x86, and reboot) And SFC scan, which found nothing Still, nothing. Not only am I fed up, but I have begun to really work with APIExplorer and Procmon as mentioned in the Technet original because I want to know WHAT is happening, not just fix it. Any thoughts?

    Read the article

  • Adding data sources for unixODBC/isql on Mac OSX Lion

    - by NP01
    I have installed unixODBC from source and mysql-odbc connector from .dmg installer on Mac OSX Lion. This was done a while ago, and at that time I successfully installed a data source (let's call it foo). Now I am trying to add another data source (DSN). I've done this through both ODBC Manager and the command-line tool myodbc-installer given with the tar bundle of the mysql-odbc connector from the mysql website. An entry shows up in /Library/ODBC/odbc.ini, which looks like this: [ODBC Data Sources] bar = MySQL ODBC 5.1 Driver [ODBC] Trace = 0 TraceAutoStop = 0 TraceFile = TraceLibrary = [myodbc] Driver = /usr/local/lib/libmyodbc5.so SERVER = localhost PORT = 3306 [bar] Driver = /usr/local/lib/libmyodbc5.so Description = DATABASE = bar However, isql fails to find it: anitya:Preferences neil$ isql bar bar bar -v [IM002][unixODBC][Driver Manager]Data source name not found, and no default driver specified [ISQL]ERROR: Could not SQLConnect Weird thing is, the old DSN foo, which is not to be seen in /Library/ODBC/odbc.ini or /etc/odbc.ini, works fine: anitya:Preferences neil$ isql foo foo foo +---------------------------------------+ | Connected! | | | | sql-statement | | help [tablename] | | quit | | | +---------------------------------------+ SQL> I'm miffed about where the DSN entries need to be entered on OSX Lion to be found by isql. Thanks in advance for your help!

    Read the article

  • Problem posting multipart form data using Apache with mod_proxy to a mongrel instance

    - by Ryan E
    I am attempting to simulate my site's production environment as closely as I can on my local machine. This is a rails site that uses Apache w/ mod_proxy to forward requests to a mongrel cluster. On my Mac OSX Leopard machine, I have the default install of apache running and have configured a vhost to use mod_proxy to to forward requests to a local running mongrel instance on port 3000. <Proxy balancer://mongrel_cluster-development> BalancerMember http://127.0.0.1:3000 </Proxy> For the most part, this is working fine. I can browse my development site using the ServerName of the vhost I configured and can confirm that requests are being properly forwarded to the mongrel instance. However, there is a page on the site that has a multipart form that is used to upload an image to the server. When I post this form, there is a delay of about 5 minutes and the browser ultimately returns a Bad Request Your browser sent a request that this server could not understand. In the error log for my vhost: [Tue Sep 22 09:47:57 2009] [error] (70007)The timeout specified has expired: proxy: prefetch request body failed to 127.0.0.1:3000 (127.0.0.1) from ::1 () This same form works fine if I browse directly to the mongrel instance (http://127.0.0.1:3000). Anybody have any idea what the problem might be and how to fix it? If there is any important information that I neglected to include, post a comment, and I can add to this question. Note: Upon further investigation, this appears to be a problem specific to Safari. The form works fine in Firefox.

    Read the article

  • Why am I getting a warning that windows is logging on with a temporary profile to run a task scheduler task?

    - by Dan C
    I am having a strange problem with the Windows Server 2008 Task Scheduler. I have to run a small command-line application every few minutes. This application just executes a quick web service call on the localhost and adds an entry to a log file; so it should not need anything special in terms of permissions. First, I created a new user account "my_scheduler" just for the task. This account is a member of the Users group (not sure what other settings I should turn on/off) and set it's password to not expire. I then create a task to run the application every few minutes. I set it to "Run whether user is logged on or not" and turned on "Do not store password. The task will only have access to local resources" (I did this since it's not hitting anything on the network. I did not turn on "Run with highest privileges" since it does not seem to need them. I set the schedule to "After triggered, repeat every 30 minutes for a duration of 1 day" and "Allow task to be run on demand" (no other settings enabled). However, I notice that in the Event Log, I see a bunch of these warnings whenever the task is run: "Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off." Even though I get the warning, the task is executing (I see the log entries appearing). Another (possibly related) issue is that I also see that it's starting multiple copies of the task (within a few seconds of each other) even though it should only start one. This is also a big problem. Any idea how I can fix this? Thanks in advance, Dan

    Read the article

  • Crazy problem with Nginx, PHP5-FPM on Ubuntu

    - by Emmanuel
    I've been trying to get a domain from shared hosting to my new VPS. Everything was working just 100% fine, and then all of a sudden rewrites stopped working, pictures that should work started returning 404s. I've got no idea why, but for some reason on my site: http://www.onlythebible.com/ only the home page works, all the other pages depend on rewrites which were working perfectly fine at one stage, but all of a sudden stopped working. Some of the pictures like this url: http://www.onlythebible.com/bgsPreview/Matthew-8.10.jpg which doesn't use a rewrite throws a 404? I almost certain it was nothing to do with the nginx configuration. I've got suspicions that it could be something to do with php5-fpm? The funny thing is, all of a sudden it started working again. And then an hour or so later it broke again and has now gone back to only displaying the home-page and all of the links (and some of the pictures) are just showing 404s. Does anyone have an idea of what the problem might be? I'm pretty new to the whole Linux VPS thing, but this just seems very strange. *edit Here's a line from the error log which might shed some light on the problem: 2011/02/06 03:04:59 [error] 2873#0: *220 open() "/usr/local/nginx/html/bgsPreview/Matthew-8.10.jpg" failed (2: No such file or directory), client: 114.77.115.211, server: onlythebible.com, request: "GET /bgsPreview/Matthew-8.10.jpg HTTP/1.1", host: "www.onlythebible.com", referrer: "http://www.onlythebible.com/" I wonder why it's trying to find the file in /usr/local/nginx/html instead of the proper root which is /var/www/ etc... Oh, and for some reason it's just started working again... for how long I don't know. Another thing that was a bit weird, is that the pages on my website are pulled from a database. But when I edited the database, the pages didn't change... It's almost like they've been cached or something.

    Read the article

  • Too much memory consumed during TFS automated build

    - by Bernard Chen
    We're running TFS 2010 Standard Edition, and we've set up an automated build to run whenever someone checks in code. We run through all of the automated tests (built with MSTest) as part of the build. We've configured the build to run the tests as a 64-bit process, but the QTAgent.exe that runs the tests grows in memory while the tests are running. It is currently reaching 8GB for the ~650 tests we have, and the process has slowed significantly when we went from 450 tests to 650 tests. When we run all of the tests in the local development environment, memory seems to be freed at least with each TestClass and never exceeds a certain level. The process of running all tests has not increased significantly in the local development environment. Is there a way to configure the build service to free up memory with each Test or each TestClass? With the way things are currently running, the build process gets very slow when we start to run out of memory on the machine. Edit: I found the MSTest invocation in the build log and ran it manually and saw the same behavior of runaway memory. I removed the /publish, /publishbuild, /teamproject, /platform, and /flavor parameters from the invocation of MSTest, in case the test runner was holding onto results until the end, but the behavior didn't change. I ran the same command line on a dev box, separate from the build server, and the memory freed up frequently. It seems there must be something wrong/different about the build server that is causing it to behave different, but I'm stumped where to look. I've looked at qtagent.exe.config, mstest.exe.config, versions of both executables. What else might affect this?

    Read the article

  • Installing messaging software displays error 1324 invalid character

    - by llykke
    Trying to install Reuters Messaging software onto a windows 7 pc we receive the error message Error 1324: The folder path 'My Documents' contains an invalid character We've tried installing the application using the local admin account and the user account which is an AD account (roaming?). This user account has administrative rights (i.e. should be allowed to install applications). The users 'My Documents' folder is located on a network drive, where only the user has access. We've tried experimenting with the HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Explorer\ User Shell Folders registry entries and setting them to a local position (i.e. C:\Users\Username\Documents) but this didn't resolve the error. We've also tried the following which was taken from a website I can't remember the name of: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem Select the NtfsDisable8dot3NameCreation entry and change the value to 0 Select the Win31FileSystem entry and change the value to 0 which didn't resolve the issue. Edit: This was also an issue when attempting to install the citrix native client necessary to run citrix application (*.ica extension). This made the same error box appear.

    Read the article

  • AWStats consumes too much resource, how to disable temporarily

    - by trante
    For some days AWStats takes %10-%20 of my CPU, takes 400-550 MB RAM and works for hours. Maybe my site's traffic became larger so process time takes more time than before or some bugs in program makes this. Anyway I want to disable AWStats temporarily. Maybe I would want to activate it in future. I found that answer. But it gives commands to remove AWStats. I only want to disable it temporarily. My system is Centos 6.3, Plesk 11.5.30 Update #19. I tried to disable cron jobs. I run this # killall awstats.pl I opened # vi /etc/cron.daily/awstats file and I changed it to this: #!/bin/sh #/usr/share/awstats/awstats_updateall.pl now -awstatsprog=/var/www/cgi-bin/awstats/awstats.pl -configdir=/etc/awstats >/dev/null 2>&1 exit 0 After some time I still see that awstats is running. What should I do more to not to awstats run again ? But without removing my files. After changing " /etc/cron.daily/awstats" file awstats doesn't start in daytime. But every night in 03:15 awstats starts again. Because of Plesk auto updates are working at that time, I changed from Plesk. Don't auto update automatically. But it seems like last night at 03:15 awstats started again. Is there any way to stop awstats temporarily except this solution ? Because this solution deletes awstats configs permanently and I don't know how to revert it back in future ? Turn off all AWStats for Plesk 11+ domains #!/bin/bash for i in /var/www/vhosts/*; do echo "Turning off and deleting Stats for" echo `basename $i` /usr/local/psa/admin/bin/webstatmng --unset-configs --stat-prog=awstats --domain-name=`basename $i` /usr/local/psa/admin/bin/webstatmng --clean --stat-prog=awstats --domain-name=`basename $i` done

    Read the article

  • Cisco SR520w FE - WAN Port Stops Working

    - by Mike Hanley
    I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

    Read the article

  • mercurial hgwebdir error with basicauth in apache2

    - by Dio
    Hello, I'm having kind of a strange error that I'm trying to track down. I was trying to setup mercurial on my home server this weekend. I seem to have it running up to the point where I'm trying to get repositories published correctly. I'm running Ubuntu 10.04 LTS Mercurial Distributed SCM (version 1.4.3) I followed the hgwebdir guide: http://mercurial.selenic.com/wiki/HgWebDirStepByStep and everything seems to work great, I can pull and push my local repositories. Then I tried to add basic auth changing ScriptAliasMatch ^/hg(.*) /var/hg/hgwebdir.cgi$1 <Directory "/var/hg"> Options ExecCGI FollowSymLinks AllowOverride None </Directory> to ScriptAliasMatch ^/hg(.*) /var/hg/hgwebdir.cgi$1 <Directory "/var/hg"> Options ExecCGI FollowSymLinks AllowOverride None AuthType Basic AuthName hgwebdir AuthUserFile /usr/local/etc/httpd/users Require valid-user </Directory> This works exactly as I'd expect it to when I navigate to the directory via my web browser, but when I hg push get a long section repeating of File "/usr/lib/python2.6/urllib2.py", line 369, in _call_chain result = func(*args) File "/usr/lib/python2.6/urllib2.py", line 855, in http_error_401 url, req, headers) File "/usr/lib/python2.6/urllib2.py", line 833, in http_error_auth_reqed return self.retry_http_basic_auth(host, req, realm) File "/usr/lib/python2.6/urllib2.py", line 843, in retry_http_basic_auth return self.parent.open(req, timeout=req.timeout) followed by File "/usr/lib/pymodules/python2.6/mercurial/keepalive.py", line 249, in do_open self._start_transaction(h, req) File "/usr/lib/pymodules/python2.6/mercurial/url.py", line 419, in _start_transaction return keepalive.HTTPHandler._start_transaction(self, h, req) File "/usr/lib/pymodules/python2.6/mercurial/keepalive.py", line 342, in _start_transaction h.endheaders() File "/usr/lib/python2.6/httplib.py", line 904, in endheaders self._send_output() File "/usr/lib/python2.6/httplib.py", line 776, in _send_output self.send(msg) File "/usr/lib/pymodules/python2.6/mercurial/url.py", line 247, in _sendfile connection.send(self, data) File "/usr/lib/pymodules/python2.6/mercurial/keepalive.py", line 519, in safesend self.connect() File "/usr/lib/pymodules/python2.6/mercurial/url.py", line 273, in connect keepalive.HTTPConnection.connect(self) RuntimeError: maximum recursion depth exceeded while calling a Python object I'm a bit at a loss on this one. I'm really not sure why adding the authorization seems to work fine via my web browser but throw these errors from hg. Any help would be greatly appreciated.

    Read the article

  • Debian and Multipath IO problem

    - by tearman
    Basically the situation is, I have a box running Debian, the box internally has an Intel SCSI RAID controller which is controlling 2 hard drives in RAID1 mode which is where the OS is installed. Further, I have a QLogic fiber channel adapter that connects the unit to a Fiber Channel SAN. My process of installation is I'll install Debian to the local drives, and leave the QLogic firmware out of it for the time being. Then once I get the unit online, I'll install the firmware drivers. This flops my internal drives from /dev/sda to /dev/sdc, which is a bit annoying, but recoverable. Probably should address these by UUID anyways. Once I get back online, I have to install multipath-tools (the framework is a multipath framework). However, once I reboot the machine again, it fails on boot after discovering multipath targets, saying my local drives are busy and cannot be mounted to /root. Any help in what may be the problem here? Or at least how to disable multipath until after the unit boots and then ignores the internal drives?

    Read the article

  • Malware Cross Site Scriptinig attack / XSS Attack?

    - by user124176
    I have been hit by an Cross Site Scripting / XSS / RFI Attack, where I cant find it anywhere in the source of the files and Hashes on files have not been changed according to OSSEC HIDS that I run real time monitoring on all webdirs. The Attack happens on IE9 Only it and appends java script code like beneath, notice that it starts after /html tag closes normally. : scXXpt language="javascXXpt"var enuwjo = function(gqumas, yhxxju, zbkpilf, xzzvhld){var xew = function(iso) {var crh, eaq, i; var owb=""; crh = iso.length; for (i = 0; i < crh; ++i) {eaq = iso.charCodeAt(i)-2;owb = owb + String.fromCharCode(eaq);} return(owb); } var janlq=document.createElement(xew("crrngv"));janlq.setAttribute(xew("eqfg"), xew(gqumas));janlq.setAttribute(xew("ctejkxg"), xew("jvvr<11"+yhxxju));janlq.setAttribute(xew("ykfvj"), "1");janlq.setAttribute(xew("jgkijv"), "1");var lgtwyi=document.createElement(xew("rctco"));lgtwyi.setAttribute(xew("pcog"),xew(zbkpilf));lgtwyi.setAttribute(xew("xcnwg"),xew(xzzvhld));janlq.appendChild(lgtwyi);document.body.appendChild(janlq); } ; enuwjo("vxfgwtogg0dcrcmnwe0encuu","g{g0o{yge{0kp129;5","mlit{ttmdttponfhrrexihpe","fh;ccfe:85:5d9872;2;f569276h5268ff9;34:25;7d:8:7h8c68777;;822c73"); No code has been changed on file as far as my HIDS says ... but I can see in my Error log, the following... File does not exist: /var/www/vhosts/superkids.dk/ggtest/tvdeurmee In the Access log, the following IP - - [09/Jun/2012:23:30:13 +0200] "GET /tvdeurmee/bapakluc.class HTTP/1.1" 404 504 "-" "Mozilla/4.0 (Windows 7 6.1) Java/1.7.0_04" IP - - [09/Jun/2012:23:30:13 +0200] "GET /tvdeurmee/bapakluc/class.class HTTP/1.1" 404 509 "-" "Mozilla/4.0 (Windows 7 6.1) Java/1.7.0_04" Now... the folder or path /tvdeurmee/bapakluc/ does not exist on the server in question, nor does the Java Class class.class, yet it still looks like an local call to the server and it was getting an "404 File not found / 504 Gateway Timeout" (attack was blocked by local machine, hence the timeout / not found) Any idea on how to prevent the attack ? Im working on using HTML Purifier, but that might not be the correct idea it seems, according to some replies im getting on their forum :) Kind regards, Steven

    Read the article

  • Imagemagick PDF to JPG conversion failing

    - by Scott
    I'm trying to convert the first page of a PDF to a JPG. I'm pretty sure I got this to work with certain PDFs, but is it really possible that certain PDFs are made incorrectly and cannot be converted? I tried running this first: $ convert 10-03-26.pdf[1] test.jpg And I got the follow: Error: /syntaxerror in readxref Operand stack: Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop 1 3 %oparray_pop --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- Dictionary stack: --dict:1062/1417(ro)(G)-- --dict:0/20(G)-- --dict:73/200(L)-- --dict:73/200(L)-- --dict:97/127(ro)(G)-- --dict:229/230(ro)(G)-- --dict:14/15(L)-- Current allocation mode is local ESP Ghostscript 7.07.1: Unrecoverable error, exit code 1 convert: Postscript delegate failed `10-03-26.pdf'. Running this instead: $ convert -verbose -colorspace rgb '10-03-26.pdf[1]' test.jpg I get the following: Error: /syntaxerror in readxref Operand stack: Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop 1 3 %oparray_pop --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- Dictionary stack: --dict:1062/1417(ro)(G)-- --dict:0/20(G)-- --dict:73/200(L)-- --dict:73/200(L)-- --dict:97/127(ro)(G)-- --dict:229/230(ro)(G)-- --dict:14/15(L)-- Current allocation mode is local ESP Ghostscript 7.07.1: Unrecoverable error, exit code 1 "gs" -q -dBATCH -dSAFER -dMaxBitmap=500000000 -dNOPAUSE -dAlignToPixels=0 "-sDEVICE=pnmraw" -dTextAlphaBits=4 -dGraphicsAlphaBits=4 "-g792x1611" "-r72x72" -dFirstPage=2 -dLastPage=2 "-sOutputFile=/tmp/magick-XXU3T44P" "-f/tmp/magick-XXoMKL8Z" "-f/tmp/magic2eec1F"Start of Image Define Huffman Table 0x00 0 1 5 1 1 1 1 1 1 0 0 0 0 0 0 0 Define Huffman Table 0x01 0 3 1 1 1 1 1 1 1 1 1 0 0 0 0 0 Define Huffman Table 0x10 0 2 1 3 3 2 4 3 5 5 4 4 0 0 1 125 Define Huffman Table 0x11 0 2 1 2 4 4 3 4 7 5 4 4 0 1 2 119 End Of Image convert: Postscript delegate failed `10-03-26.pdf'. Why would the conversion fail? Just as an aside, this is happening on a (gs) Grid-Service on (mt) Media Temple hosting. I cannot install programs on the server, but both Imagemagick and Ghostscript are installed Thanks!

    Read the article

  • Giving Select Windows Domain Users Symbolic Link Privilege

    - by fp0n
    I would like to setup select users on our domain to have the ability to create symbolic links on local NTFS drives and network shares without needing to run as Administrator, as part of an application with will call the CreateSymbolicLink() API directly. The default configuration for our users is to be Administrator of their computer and I think I am fighting UAC to make the privileges work the way that I want because of that. I found this link on MSDN: http://social.msdn.microsoft.com/Forums/en-SG/windowssdk/thread/fa504848-a5ea-4e84-99b7-0eb4e469cbef which describes the interaction between the SeCreateSymbolicLinkPrivilege, UAC and a domain but really does not have a solution. Here's the three options I've come up with: 1) Create a new group, give the SeCreateSymbolicLinkPrivilege to the group and assign users to the group 2) Give each individual user (2 now, more later) the privilege 3) Give the privilege to the default User group which opens it up to all Users 4) Change config so Users are not Admins by default (probably would work but not likely) Based on my testing, only 3 works for me and that is the least desirable but I've only got a local server to test with, not a domain. I need to recommend to the admin how to set this up and also have something that we can easily explain to other users of our application that are on their own domain or not on a domain. The other option seems to be to create a Service that runs with a SYSTEM account that creates the links for the application but I'd rather not go that route. Thanks.

    Read the article

  • Can ping IP address and nslookup hostname but cannot ping hostname

    - by jao
    On a windows 2003 server I can nslookup www.google.com which returns Server: localhost Address: 127.0.0.1 Non-authoritative answer: Name: www.l.google.com Addresses: 74.125.79.104, 74.125.79.147, 74.125.79.99 Aliases: www.google.com I can then ping 74.125.79.104: Pinging 74.125.79.104 with 32 bytes of data: Reply from 74.125.79.104: bytes=32 time=16ms TTL=54 Reply from 74.125.79.104: bytes=32 time=32ms TTL=54 Reply from 74.125.79.104: bytes=32 time=15ms TTL=54 Reply from 74.125.79.104: bytes=32 time=15ms TTL=54 Ping statistics for 74.125.79.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 15ms, Maximum = 32ms, Average = 19ms But I cannot ping www.google.com: Ping request could not find host www.google.com. Please check the name and try again. (this one is different from the other question in that this one has a TLD, it is not a local domain.) Update: I am running a dns server at localhost (127.0.0.1). Even when I change it to use for example opendns, it still can nslookup hostname and ping ip address, but not ping hostname. So what is wrong? Update 2: here is the ipconfig /all result: Windows IP Configuration Host Name . . . . . . . . . . . . : SERVER Primary Dns Suffix . . . . . . . : NETWORK.local Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : NETWORK.local Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2 Physical Address. . . . . . . . . : 00-0F-1F-56-3B-AA DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.7.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.7.1 DNS Servers . . . . . . . . . . . : 127.0.0.1 Update 3: Thanks everyone for their help and suggestions. I appreciate that. Ipconfig /flushdns returns: Sucessfully flushed the DNS resolver cache Ipconfig /displaydns returns: 2.7.168.192.in-addr.arpa ---------------------------------------- Record Name . . . . . : 2.7.168.192.in-addr.arpa. Record Type . . . . . : 12 Time To Live . . . . : 0 Data Length . . . . . : 4 Section . . . . . . . : Answer PTR Record . . . . . : webserver.mydomainname.com 1.0.0.127.in-addr.arpa ---------------------------------------- Record Name . . . . . : 1.0.0.127.in-addr.arpa. Record Type . . . . . : 12 Time To Live . . . . : 0 Data Length . . . . . : 4 Section . . . . . . . : Answer PTR Record . . . . . : localhost Update 4: Wireshark shows the following: 3 11.540542 208.67.220.220 192.168.7.2 DNS Standard query response A 74.125.79.99 A 74.125.79.104 A 74.125.79.147 6 42.056794 192.168.7.2 192.168.7.255 NBNS Name query NB WWW.GOOGLE.COM<00> which is weird: when I ping, it sends a packet to 192.168.7.255 instead of asking the DNS server for an address

    Read the article

  • Squid w/ SquidGuard fails w/ "Too few redirector processes are running"

    - by DKNUCKLES
    I'm trying to implement a Squid proxy in a quick and easy fashion and I'm receiving some errors I have been unable to resolve. The box is a pre-made appliance, however it seems to fail on launch.The following is the cache.log file when I attempt to launch the squid service. 2012/11/18 22:14:29| Starting Squid Cache version 3.0.STABLE20-20091201 for i686 -pc-linux-gnu... 2012/11/18 22:14:29| Process ID 12647 2012/11/18 22:14:29| With 1024 file descriptors available 2012/11/18 22:14:29| Performing DNS Tests... 2012/11/18 22:14:29| Successful DNS name lookup tests... 2012/11/18 22:14:29| DNS Socket created at 0.0.0.0, port 40513, FD 8 2012/11/18 22:14:29| Adding nameserver 192.168.0.78 from /etc/resolv.conf 2012/11/18 22:14:29| Adding nameserver 8.8.8.8 from /etc/resolv.conf 2012/11/18 22:14:29| helperOpenServers: Starting 5/5 'bin' processes 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| helperOpenServers: Starting 5/5 'squid-auth.pl' processes 2012/11/18 22:14:29| User-Agent logging is disabled. 2012/11/18 22:14:29| Referer logging is disabled. 2012/11/18 22:14:29| Unlinkd pipe opened on FD 23 2012/11/18 22:14:29| Swap maxSize 10240000 + 8192 KB, estimated 788322 objects 2012/11/18 22:14:29| Target number of buckets: 39416 2012/11/18 22:14:29| Using 65536 Store buckets 2012/11/18 22:14:29| Max Mem size: 8192 KB 2012/11/18 22:14:29| Max Swap size: 10240000 KB 2012/11/18 22:14:29| Version 1 of swap file with LFS support detected... 2012/11/18 22:14:29| Rebuilding storage in /opt/squid3/var/cache (DIRTY) 2012/11/18 22:14:29| Using Least Load store dir selection 2012/11/18 22:14:29| Set Current Directory to /opt/squid3/var/cache 2012/11/18 22:14:29| Loaded Icons. 2012/11/18 22:14:29| Accepting HTTP connections at 10.0.0.6, port 3128, FD 25. 2012/11/18 22:14:29| Accepting ICP messages at 0.0.0.0, port 3130, FD 26. 2012/11/18 22:14:29| HTCP Disabled. 2012/11/18 22:14:29| Ready to serve requests. 2012/11/18 22:14:29| Done reading /opt/squid3/var/cache swaplog (0 entries) 2012/11/18 22:14:29| Finished rebuilding storage from disk. 2012/11/18 22:14:29| 0 Entries scanned 2012/11/18 22:14:29| 0 Invalid entries. 2012/11/18 22:14:29| 0 With invalid flags. 2012/11/18 22:14:29| 0 Objects loaded. 2012/11/18 22:14:29| 0 Objects expired. 2012/11/18 22:14:29| 0 Objects cancelled. 2012/11/18 22:14:29| 0 Duplicate URLs purged. 2012/11/18 22:14:29| 0 Swapfile clashes avoided. 2012/11/18 22:14:29| Took 0.02 seconds ( 0.00 objects/sec). 2012/11/18 22:14:29| Beginning Validation Procedure 2012/11/18 22:14:29| WARNING: redirector #1 (FD 9) exited 2012/11/18 22:14:29| WARNING: redirector #2 (FD 10) exited 2012/11/18 22:14:29| WARNING: redirector #3 (FD 11) exited 2012/11/18 22:14:29| WARNING: redirector #4 (FD 12) exited 2012/11/18 22:14:29| Too few redirector processes are running FATAL: The redirector helpers are crashing too rapidly, need help! Squid Cache (Version 3.0.STABLE20-20091201): Terminated abnormally. CPU Usage: 0.112 seconds = 0.032 user + 0.080 sys Maximum Resident Size: 0 KB Page faults with physical i/o: 0 Memory usage for squid via mallinfo(): total space in arena: 2944 KB Ordinary blocks: 2857 KB 6 blks Small blocks: 0 KB 0 blks Holding blocks: 1772 KB 8 blks Free Small blocks: 0 KB Free Ordinary blocks: 86 KB Total in use: 4629 KB 157% Total free: 86 KB 3% The "permission denied" area is where I have been focusing my attention with no luck. The following is what I've tried. Chmod'ing the /opt/squidguard/bin folder to 777 Changing the user that squidguard runs under to root / nobody / www-data / squid3 Tried changing ownership of the /opt/squidguard/bin folder to all names listed above after assigning that user to run with squid. Any help with this would be greatly appreciated.

    Read the article

  • SCVMM 2008 R2 problems migrating VM from VS2005 to Hyper-V host

    - by Scott Ivey
    I have System Center Virtual Machine Manager 2008 R2 installed, and have a Hyper-V R2 host and a Virtual Server 2005 host. I'm trying to migrate my machines from the VS2005 host to the Hyper-V host, and keep getting the following error... VMM is unable to complete the requested file transfer. The connection to the HTTP server myserver.mydomain.local could not be established. (Unknown error (0x80072efd)) Recommended Action Ensure that the HTTP service and/or the agent on the machine myserver.mydomain.local are installed and running and that a firewall is not blocking HTTPS traffic. (Note - migrations between Hyper-V hosts managed by the VMM server work fine - my problem is just going from VS2005-Hyper-V hosts) I have no firewalls turned on on either of the servers, and no firewalls in the middle. I've looked all over for answers to this problem, and am getting nowhere. All the articles I find when searching are talking about either V2V or P2V - and i'm just trying to do a straight migrate VM. I've tried rebooting the boxes, changing the BITS SSL port number, restarting services, triple-checking firewalls, etc. Does anyone have any good suggestions as to how I can resolve this problem?

    Read the article

  • Outlook errors and blank address book?

    - by Chasester
    I have a user with a fresh install of Windows 7 64 bit. Office 2010 was installed also. Everything worked great until we installed Adobe Pro 9 and Wordperfect 12. (for outlook we are not using exchange). Then Outlook popped an error saying could not start Outlook. I then modified it to run in compatibility mode and Outlook starts. Then took compatibility mode off and outlook continues to start without difficulty. However, her address book went blank (contacts are all there). In the properties of the contact folder it is checked (and grayed out) to include this folder in the address book, and the Outlook address book is listed when I look at account properties. I tried creating a new profile to no avail. I tried creating a new profile and creating a new pst file - to no avail. I tried uninstalling office, removing the folders inside roaming and local, reinstalled office; got the same could not start Outlook error - did the compatibility mode bit and got it to start - but the Address book continues to be empty. Has anyone run across this before? I'm thinking that there must be some other preferences type folder other than those in Roaming and Local since her signature remained when I reinstalled Office.

    Read the article

  • Add Network Printer drivers in Windows 7/Server 2008 R2?

    - by Matias Nino
    I'm running a 64 bit Windows 7 / Windows 2008 R2 workstation that I just installed. I need to add a printer that is shared on the network from a 32bit Windows 2000 print server. This is an HP LaserJet 5Si printer, the drivers for which HP tells me are automatically built into Windows 7/R2. However, whenever I connect to the printer or try to add it, I get the following screen: Upon clicking OK, I get this screen asking me to locate the driver: How can I possibly locate a driver that is SUPPOSED TO BE NATIVELY SUPPORTED on Windows 7/R2? The tough part is that this printer is one of many shared on a server and does not have a direct IP address. Even worse: I have no access to the print server so I cannot put the 64 bit drivers on there. Any ideas? UPDATE: HP doesn't make a Vista driver either. It claims it is natively supported by Vista and 7, which is true because I am able to create a local printer on a fake tcp/ip port and Windows lets me pick the proper driver. However, when adding from the network, Windows does not let me select a driver and demands an INF. I tried searching the entire sub-structure of the C:\Windows directory and could not find any INF files that contain HP information. The INF might be located somewhere in the Windows installation DVD, but all the files on the DVD are compressed and unrecognizable. UPDATE #2 I installed the proper printer driver as a local printer (with no printer attached) and it installed. However, this did not change the fact that it STILL asks me to provide drivers when connecting to the networked printer.

    Read the article

  • Nginx + uWSGI on a fresh Ubuntu install - bind error port 80

    - by knuckfubuck
    I know this is a common problem usually having to do with apache or another service already running on port 80 and I have done a lot of searching and running netstat and still have not figured out why I am getting this error. I rebuilt my slice, did a fresh install of Ubuntu 10.04 and setup nginx + uwsgi. It worked and I was able to see my Django site. I then installed Postgres8.4 and the rest of the stack needed for Geodjango from this link. After that was done I tried to restart nginx and I get this error: sudo /etc/init.d/nginx start Starting nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok configuration file /usr/local/nginx/conf/nginx.conf test is successful [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: still could not bind() I have nginx set to listen 80. Here's an output from netstat -l --numeric-ports | grep 80: tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:8000 0.0.0.0:* LISTEN Output from sudo lsof +M -i4: nginx 2330 root 8u IPv4 3195 0t0 TCP *:www (LISTEN) nginx 2331 www-data 8u IPv4 3195 0t0 TCP *:www (LISTEN) uwsgi 2335 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2352 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2353 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2354 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2355 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) Anyone have any other ideas how I can figure out what is blocking port 80? edit Paste of my /etc/init.d/nginx script here: http://dpaste.com/hold/400937/

    Read the article

< Previous Page | 345 346 347 348 349 350 351 352 353 354 355 356  | Next Page >