Search Results

Search found 18842 results on 754 pages for 'the machine'.

Page 349/754 | < Previous Page | 345 346 347 348 349 350 351 352 353 354 355 356  | Next Page >

• USB Audio Device Loopback Through Speakers

  - by matto1990

  I have a USB turntable which when plugged in to my ubuntu 10.10 machine appears in the audio settings as an input device (USB PnP Audio Device Analog Stereo) like a microphone. What I'd like to be able to do it to have the sound for that audio device played back through the audio output (speaker or whatever). I'm not too worried if there's a slight delay between the audio coming in and it being played out through the speakers. As far as I'm aware this is refereed to as software loopback. I can achieve exactly what I want if I open Audacity, enable software loopback and press record. Obvious this isn't ideal as I don't really want it recording what I'm playing all the time. I know this is possible because of the Audacity example however I'd like to know if there's a way to do it without it recording. I've search around for a while for a piece of software that does this, however I couldn't get anything even close. Any help would be greatly appreciated.

  Read the article

• Connection manager detects network but won't connect

  - by Carson Chittom

  I've just installed 12.04 on my home desktop. Because of where it's located, in order not to have my children tripping over cat5 cable, I've got a cheap 802.11n USB device plugged in, which uses a Realtek 8192CU chip. The house wifi is protected with WPA2. Ubuntu's Network Manager detects the network, but connecting to it just times out and asks for the password again. I'm sure I'm using the correct password. No other computers on the house network are having any difficulty. This device previously worked correctly with both Windows 7 and OpenBSD in the same machine. The linux-firmware package is installed (from the disc) at version 1.79, and /lib/firmware/rtlwifi/rtl8192cufw.bin is present. dmesg|grep rtl only shows the "loading firmware" message. I've tried Google, but I apparently can't find the right set of words to plug in, because I haven't found anything related (lots of "doesn't work at all," but nothing matching my circumstances). Any help would be greatly appreciated.

  Read the article

• How to create a shared folder using command line on a server

  - by sadmicrowave

  After following the tutorial here I ran into a problem. Here is what I did. On my server I installed nfs-kernel-server and edited the /etc/exports file to include the folder I want to share: /var *(rw,sync) On my client machine I edited my fstab file to include share: //128.251.xxx.xxx/var/ ~/uslonsweb003 nfs #username=[username],password=[password], 0 0 Entered command: sudo mount -a which gives this error: mount.nfs: remote share not in 'host:dir' format Where did I go wrong with this setup? Also if there is a better way (using command line) to setup a folder share on an Ubuntu 10.10 server that will be accessed by other linux and windows machines please let me know. UPDATE: The mapped drive is now not letting me create,edit,delete files or folders (readonly access) my configuration is as follows: client fstab file: 128.251.xxx.xxx:/var /home/coreyf/uslonsweb003 nfs rw,hard,intr, 0 0 server exports file: /var *(rw,no_root_squash,sync,no_subtree_check) UPDATE 2: Using Allans solution my drive mounted correctly however after putting rw,intr as my additional parameters I cannot create, edit and delete folders/files.

  Read the article

• OUYA and Unity set up problems

  - by Atkobeau

  I'm having trouble with the Unity / OUYA plugin. I'm using Unity 4 with the latest update on a Windows 7 machine. When I open the starter kit and try to compile the plugin I get the following error: Picked up _JAVA_OPTIONS: -Xmx512M And if I try to Build and Run I get this error: Error building Player: ArgumentException: Illegal characters in path. I'm stumped, I've gone through lots of forum posts here and on stackoverflow and I can't seem to resolve it. My environment variables look like this: PATH - C:\Users\dave\Documents\adt-bundle-windows-x86_64-20130219\sdk\tools; C:\Users\dave\Documents\adt-bundle-windows-x86_64-20130219\sdk\platform-tools\ JAVA_HOME - C:\Program Files (x86)\Java\jdk1.6.0_45\ Everything in the OUYA Panel is white Any ideas?

  Read the article

• How to manage permissions on a shared volume for OSX and ubuntu

  - by gentmatt

  On my mac I'm using an unjournaled HFS partition to share files between OSX 10.8 and Ubuntu 12.04. It was a nice thought at first, because Time Machine will automatically backup the volume in OSX, but I soon noticed that OSX and Ubuntu mess with the permission in a way that makes things messy for me. So, in order to fully view and change files, I keep using chmod to apply permissions that which will allow me to fully use a document. But I don't understand why I have to keep applying changes over and over. Is possible to set some kind of permission permanently so that both operating systems will respect permanently? I guess 777 will work, but I thought that this is not a smart thing to do. But as long as 'others' does not get full access (third seven), I see a lock icon on the file in ubuntu.

  Read the article

• Dealing with blackhat SEO companies and low quality link building competitors [closed]

  - by Mikko Ohtamaa

  I have often faced a case where the competitors of my client use SEO blackhat tactics where they contact a SEO company to do link building for their websites and products. Here is an example of a typical case of a fake blog created only for link building purposes A very low content article http://marshallfab.com/fundus-camera-explained.html in obvious fake blog: no author information, partially machine generated text, all blog posts are solely about link building Following the link you get to the promoted company page http://www.patternless.com/ ... which, unsurprisingly, links the SEO company homepage in the footer text http://www.affordableseofl.com/ ... who are not shy to advertise their Extremely aggressive SEO plan Does Google have any feedback channel where one could submit cases like this, so that Google would punish the link builders? Are there any means to bring these blackhat companies to pushame to damage their reputation?

  Read the article

• Creating a blog for software changes

  - by Dave

  I work for a small company where I maintain a number of project all at once. I would like to create a blog and note software changes/update so that I can keep track of things. Plus it will also serve as help tool for other if they need help. I would like to install something locally on my machine or network, either ASP or PHP is fine. Which software would you recommend? Is it good idea, bad idea? Has anyone done it? I have worked with wordpress and I like it but I am afraid it is not best for code snippets. Any thoughts I do use source control. I am not an expert on it though. I use three different development environment. 1. Visual Studio 2. Eclipse 3. SQL Server Management Studio

  Read the article

• Powershell – script all objects on all databases to files

  - by Nigel Rivett

  <# This simple PowerShell routine scripts out all the user-defined functions, stored procedures, tables and views in all the databases on the server that you specify, to the path that you specify. SMO must be installed on the machine (it happens if SSMS is installed) To run - set the servername and path Open a command window and run powershell Copy the below into the window and press enter - it should run It will create the subfolders for the databases and objects if necessary. #> $path = “C:\Test\Script\" $ServerName = "MyServerNameOrIpAddress" [System.Reflection.Assembly]::LoadWithPartialName('Microsoft.SqlServer.SMO') $serverInstance = New-Object ('Microsoft.SqlServer.Management.Smo.Server') $ServerName $IncludeTypes = @(“tables”,”StoredProcedures”,"Views","UserDefinedFunctions") $ExcludeSchemas = @(“sys”,”Information_Schema”) $so = new-object (‘Microsoft.SqlServer.Management.Smo.ScriptingOptions’) $so.IncludeIfNotExists = 0 $so.SchemaQualify = 1 $so.AllowSystemObjects = 0 $so.ScriptDrops = 0 #Script Drop Objects $dbs=$serverInstance.Databases foreach ($db in $dbs) { $dbname = "$db".replace("[","").replace("]","") $dbpath = "$path"+"$dbname" + "\" if ( !(Test-Path $dbpath)) {$null=new-item -type directory -name "$dbname"-path "$path"} foreach ($Type in $IncludeTypes) { $objpath = "$dbpath" + "$Type" + "\" if ( !(Test-Path $objpath)) {$null=new-item -type directory -name "$Type"-path "$dbpath"} foreach ($objs in $db.$Type) { If ($ExcludeSchemas -notcontains $objs.Schema ) { $ObjName = "$objs".replace("[","").replace("]","") $OutFile = "$objpath" + "$ObjName" + ".sql" $objs.Script($so)+"GO" | out-File $OutFile #-Append } } } }

  Read the article

• BlueStacks Android App Player Now Available for Macs

  - by Jason Fitzpatrick

  Last year we showed you how to setup BlueStacks on your Windows machine in order to enjoy Android apps on your PC desktop; now BlueStacks is available for Mac OS X with that same cross-platform Android goodness. The Mac version functions much the same as the PC version, if you’re interested in the Mac version be sure to check out our detailed guide to setting up the PC version. BlueStacks for Mac [via TUAW] How to Banish Duplicate Photos with VisiPic How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It?

  Read the article

• How to use GCC 4.7 in place of 4.6 (Ubuntu 12.04)

  - by Larz Conwell

  So I'm working on a project and I wanted to use some C11 features for C. To use those features GCC 4.7 is required, so I went to synaptic and looked up 4.7, and I found the packages gcc-4.7-base so I installed it[1]. So now that gcc-4.7-base is installed I expected to be able to use 4.7, but no, when I do gcc --version it still shows 4.6.3 even more, when I try to directly call 4.7(via /usr/bin/gcc-4.7) it doesn't exist, though a gcc-4.6 executable does exist. How do I "activate" GCC 4.7? I read here, you do some crazy stuff with update-alternatives, but it doesn't work for me as the gcc-4.7 executable doesn't actually exist on my machine. Notes: 1. I also saw gcc-4.6-base, so I figured I'd uninstall it, but synaptic attempted to remove every package I had installed and install a Java runtime, so for obvious reason I decided not to remove it.

  Read the article

• How do I edit my resolv.conf file?

  - by Ahatius

  I have the problem that my ubuntu machine uses the wrong dns server. For some reason he queries localhost for dns records. I have added the dns server in the network settings gui, but /etc/resolv.conf still contains 127.0.0.1 as dns server. Now I tought I could just edit the file by myself, but it explicitly says I should not edit the file by hand. Now, since the network settings GUI didn't generate the file with the right settings, how do I generate a new resolv.conf file by myself?

  Read the article

• SOA Suite 11g: Unable to start domain (Error occurred during initialization of VM)

  - by Chris Tomkins

  If you have recently installed SOA Suite, created a domain and then tried to start it only to find it fails with the error: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. the solution is to edit the file <domain home>\bin\setSOADomainEnv.cmd/sh (depending on your platform) and modify the line: set DEFAULT_MEM_ARGS=-Xms512m -Xmx1024m to something like: set DEFAULT_MEM_ARGS=-Xms512m -Xmx768m Save the file and then try to start your domain again. Everything should now work at least it does on the Dell Latitude 630 laptop with 4Gb RAM that I have. Technorati Tags: soa suite,11g,java,troubleshooting,problems,domain

  Read the article

• Dynamic MMap ran out of room when trying to sudo apt-get anything

  - by user1610406

  I was having an error in Update Manager that asks me to do a partial upgrade and it fails. Now I can't sudo apt-get install anything. I tried to fix it, and now I can't sudo apt-get anything. Every time, I get this output: Reading package lists... Error! E: Dynamic MMap ran out of room. Please increase the size of APT::Cache-Limit. Current value: 25165824. (man 5 apt.conf) E: Error occurred while processing libuptimed0 (NewVersion1) E: Problem with MergeList /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_lucid_universe_binary-i386_Packages W: Unable to munmap E: The package lists or status file could not be parsed or opened. I have no idea why this is happening or how to fix it, and I fear that if I try something that probably doesn't work that it will make my problem worse. (Just for reference I am currently running 10.04 (Lucid) on my machine.)

  Read the article

• how to access samba shares via nat?

  - by HSM

  I have setup a virtual machine in Virtual Box and installed a Samba Server. I changed the guest operating system's NIC from Bridged to NAT for a reason that I can't remember. I then added a additional NIC in "host only adapter" mode. The Windows host OS now can access the Ubuntu 10.10 virtual server via the Host Only NIC. However, I can not access the Samba server running on the Ubuntu guest OS. I am not sure what to do now. How can I get the widows Host OS to access the Guest OS' samba server.

  Read the article

• Ubuntu Server 12.04 Screen Resolution "Out of Range"

  - by Alastair Mackie

  I'm fairly new to ubuntu and have just installed Ubuntu Server 12.04 on a spare machine to experiment and play with! The installation went without problem, however whenever the OS boots the monitor displays a an error message saying the resolution is "out of range" and i can't see to do anything - i can wait as long as i like, but nothing appears. Ubuntu is the only OS installed so bypasses GRUB on boot, although the GRUB screen is also out of range if forced on startup. I can access a shell from the recover mode and i can get at a terminal through a LiveCD of the Desktop version but have had little luck with either. I've been trying to figure this out for days and i'm at a total loss. Any thoughts?

  Read the article

• Flash player (in Firefox) is unstable in 14.04

  - by henry

  For 13.10, I used this guide to get Intel iGPU-supported playback of flash videos in Firefox: http://www.webupd8.org/2013/09/adobe-flash-player-hardware.html All in all, Intel graphics acceleration for flash content was working just fine in 13.10, at least on my machine (with Xubuntu). I basically followed the guide to do the same for 14.04, but about 2-3 weeks ago flash videos started acting up. Whenever I have one instance of flash paused or stopped in one tab and go to the next tab to continue some song on Soundcloud or something, it's game over. I'm clueless as to what I can do here. Did anything change in the meantime?

  Read the article

• boot issues - long delay, then "gave up waiting for root device"

  - by chazomaticus

  I've had this issue on and off for about two years now. I noticed it on a new (custom built) machine running 10.04 when that first came out, but then it went away until a few months ago. I've gone through a number of hard drive changes but I can't say specifically what if anything I changed hardware-wise to make it stop or start happening. I had assumed upgrading to a modern Ubuntu version would fix the issue, so I installed 12.04 beta on a spare partition last night, but it's still happening. Here's the issue. After grub loads and I select a kernel to boot, the screen goes blank save for a blinking cursor. It sits in this state for many long minutes before it finally gives up and gives me an initramfs shell with the message gave up waiting for root device (and lists the /dev/disk/by-uuid/... path it was waiting for) but no other specific diagnostic information. Now, here's the tricky part. For one, the problem is intermittent - sometimes it progresses from the blinking cursor to the Ubuntu splash boot screen in a few seconds, and once it gets that far it always continues booting fine. The really bizarre thing is that I can "force" it to "find" the root device by repeatedly pressing the space bar and hitting the machine's power button. If I tap those enough, eventually I will notice the hard drive light coming on, at which point it will always continue the boot process after a few seconds. Interestingly, if I wait slightly too long before pressing the power button (30s?), as soon as I press it I get the gave up waiting message and the initramfs shell. I've tried setting up /etc/fstab (and the grub menu.lst or whatever it's called nowadays) to use device names (e.g. /dev/sda1) instead of UUIDs, but I get the same effect just with the device name, not UUID, in the error message. I should also mention that when I boot to Windows 7, there is no issue. It boots slowly all the time just by virtue of being Windows, but it never hangs indefinitely. This would seem to indicate it's a problem in Ubuntu, not the hardware. It's pretty annoying to have to babysit the computer every time it boots. Any ideas? I'm at a loss. Not even sure how to diagnose the issue. Thanks! EDIT: Here's some dmesg output from 10.04. The 15 second gap is where it was doing nothing. I pressed the power button and space bar a few times, and the stuff at 16 seconds happened. Not sure what any of it means. [ 1.320250] scsi18 : ahci [ 1.320294] scsi19 : ahci [ 1.320320] ata19: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe100 ir q 18 [ 1.320323] ata20: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe180 ir q 18 [ 1.403886] usb 2-4: new high speed USB device using ehci_hcd and address 4 [ 1.562558] usb 2-4: configuration #1 chosen from 1 choice [ 16.477824] ata16: SATA link down (SStatus 0 SControl 300) [ 16.477843] ata19: SATA link down (SStatus 0 SControl 300) [ 16.477857] ata3: SATA link down (SStatus 0 SControl 300) [ 16.477895] ata15: SATA link down (SStatus 0 SControl 300) [ 16.477906] ata20: SATA link down (SStatus 0 SControl 300) [ 16.477977] ata17: SATA link down (SStatus 0 SControl 300) [ 16.478003] ata12: SATA link down (SStatus 0 SControl 300) [ 16.478046] ata13: SATA link down (SStatus 0 SControl 300) [ 16.478063] ata14: SATA link down (SStatus 0 SControl 300) [ 16.478108] ata11: SATA link down (SStatus 0 SControl 300) [ 16.478123] ata18: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 16.478127] ata6: SATA link down (SStatus 0 SControl 300) [ 16.478157] ata5: SATA link down (SStatus 0 SControl 300) [ 16.478193] ata18.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 After that, it took its sweet time, and I had to keep hitting space bar to coax it along. Here's some more dmesg output from a little later in the boot process: [ 17.982291] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00 :13.0/usb5/5-2/5-2:1.0/input/input4 [ 17.982335] generic-usb 0003:046E:5506.0002: input,hidraw1: USB HID v1.10 Key board [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input0 [ 18.005211] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00 :13.0/usb5/5-2/5-2:1.1/input/input5 [ 18.005274] generic-usb 0003:046E:5506.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input1 [ 22.484906] EXT4-fs (sda6): INFO: recovery required on readonly filesystem [ 22.484910] EXT4-fs (sda6): write access will be enabled during recovery [ 22.548542] EXT4-fs (sda6): recovery complete [ 22.549074] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 32.516772] Adding 20482832k swap on /dev/sda5. Priority:-1 extents:1 across:20482832k [ 32.742540] udev: starting version 151 [ 33.002004] Bluetooth: Atheros AR30xx firmware driver ver 1.0 [ 33.008135] parport_pc 00:09: reported by Plug and Play ACPI [ 33.008186] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 33.012076] lp: driver loaded but no devices found [ 33.037271] ppdev: user-space parallel port driver [ 33.090256] lp0: using parport0 (interrupt-driven). Any clues in there?

  Read the article

• Internet stopped working after aircrack install (can still connect to my router). Suggestions?

  - by Dan

  I'm sure I did something dumb during the install for aircrack, but I have no clue what. Like I said, I can connect to my router (not trying to crack, simply logging into it), I just can't get internet access. To make this more interesting, the machine is dual booted and when I log into Windows I have zero issues. I feel like some driver may have been messed up in the process, but I'm not sure if that's a reasonable assumption or how exactly to check that. Also, can't revert to backup as there are none. Suggestions on how to trouble-shoot would be appreciated. EDIT: Hard-wiring to the wall I can get internet access on the Ubuntu side... PS- I know this is a stretch as far as fitting the Ubuntu section, but no other stackoverflow sites seemed to fit better.

  Read the article

• Wlan connection got lost permanent

  - by chris

  I have a desktop with a fritz usb wlan n tick and tried ubuntu 12.04. installlation is fine and wlan is working, however connection drops permanent. reconnecting manually fixes it but after a few minutes it drops again. it's connected to a vodafone 802 box with wlan n fix set. it seems that it works when i switch off n mode...but i need to test. can someone confirm or is there another solution? i have another machine with 12.04 (hp 625 laptop) running where connection is stable. any help much appreciated. thank chris

  Read the article

• java MainServer gives java.lang.UnsupportedClassVersionError: Unsupported major.minor version 51.0

  - by Paradox

  Compiling is easy but when using java to run the programs, it gives Exception found. I am using Ubuntu 12.04 without internet connections. Also, installed Oracle JDK7 and JRE7. Also did the update-alternatives command on java, javac and javaws. Changed the machine java in /etc/profiles. PATH is pointing to oracle java folder. I did many searches on Google about this topic but each time jdk and jre version are different. Also check version of jdk and jre using java -version and javac - version. Both of them are the same. The system also contains OpenJdk6 and OpenJdk7. So, how do I remove these errors?

  Read the article

• Are you aware of any client-side malware that sends lots of junk requests for .gifs?

  - by Matt Sherman

  I am getting dozens of 404 errors on my site that are requests for gif's with apparently random names, like 4273uaqa.gif and 5pwowlag.gif. I see that most of them are coming from one user. I assume something is happening in the background on her machine without her knowledge -- a malware thing on the client. Have you seen this behavior before, and do you know what sort of malware might cause it? Would love to advise my customer that s/he has an issue. I'd also like to stop getting these 404 reports. (reposted from main Stack Overflow)

  Read the article

• Recovering data from hard disk after an accidental Ubuntu reinstallation

  - by Saurabh Agarwal

  My computer got wiped accidentally due to a fresh Ubuntu installation. Since the drive contains very important data and codes, it would be really great if the same could be recovered. It is a 2TB hard drive which had Ubuntu 10.10 earlier. It now has a Ubuntu 12.04 installed on it (which I understand occupies ~4GB). The machine has been powered off since. The installation was done using a usb with the option where the previous ubuntu installation is removed. Since installation doesn't take a lot of time, I'm inclined to think that the disk wasn't completely formatted and that most of the data is still there. I have no experience with recovery and hence a detailed explanation is very helpful. NOTE: I can arrange an additional 2TB hard disk for copying data. My computer has a fast internet connection and I have other computers connected to the network which I may use to access the previous one as well.

  Read the article

• Apple Cinema Display 23" and grub

  - by Joshua Pruitt

  As per the title, I'm running my display on an older 23" Apple Cinema Display (because I still love it, darn it). I'm pushing it with an ATI Radeon DVI dual-link PCIe card. It works just fine, except GRUB doesn't seem able to push out the 1920x1200 pixel resolution needed in order to show me a boot menu! So..., I keep a smaller second monitor connected as the primary display so that I can see the boot menu and boot the system (I don't use that display once booted). This is a goofy work-around, and I'd like to just use my single display exclusively to boot the machine. I found some grub codes for higher resolutions, but not for 1920x1200. Is it capable of this? Did I just miss it? Thanks in advance!!!

  Read the article

• How do I install the Intel Graphics driver in my system?

  - by John

  Can someone help me out and explain or point me in the right direction on how to check video drivers and see if my video card running okay? I had 10.04 installed on my Thinkpad r61 with Compiz Manager and life was great, until the machine took water damage. I bought an ASUS (X54H) since and am trying out 12.04, but the desktop just doesn't look right. I always struggled with video driver installation. There are no proprietary drivers available in the hardware manager. When I run lspci | grep VGA: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) I will greatly appreciate your help. I want to use Linux more, but like I said video drivers appear to be my biggest concern. I have also tried 12.04 on my desktop PC, but again failed to configure video card, so switched back to Windows 7.

  Read the article

• Azure Full trust permissions

  - by kaleidoscope

  Under Windows Azure full trust, your role has access to a variety of system resources that are not available under partial trust File System Resources A role running in Windows Azure has permissions to read and write to certain file, directory, and volume resources on the server. These permissions are outlined in the following table.  File system resource Permission System root directory No access Subdirectories of the system root directory No access Windows directory Read access only Machine configuration files No access Service configuration file Read access only Local storage resource Full access Registry Resources The following table outlines permissions available to the role when accessing the registry while running in Windows Azure. HKEY_CLASSES_ROOT Read access HKEY_CURRENT_USER No access HKEY_LOCAL_MACHINE Read access HKEY_USERS Read access HKEY_CURRENT_CONFIG Read access More details can be found at: http://msdn.microsoft.com/en-us/library/dd573363.aspx   Amit, S

  Read the article

< Previous Page | 345 346 347 348 349 350 351 352 353 354 355 356  | Next Page >