Search Results

Search found 1110 results on 45 pages for 'constraint'.

Page 35/45 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

  • Deadlock in SQL Server 2005! Two real-time bulk upserts are fighting. WHY?

    - by skimania
    Here's the scenario: I've got a table called MarketDataCurrent (MDC) that has live updating stock prices. I've got one process called 'LiveFeed' which reads prices streaming from the wire, queues up inserts, and uses a 'bulk upload to temp table then insert/update to MDC table.' (BulkUpsert) I've got another process which then reads this data, computes other data, and then saves the results back into the same table, using a similar BulkUpsert stored proc. Thirdly, there are a multitude of users running a C# Gui polling the MDC table and reading updates from it. Now, during the day when the data is changing rapidly, things run pretty smoothly, but then, after market hours, we've recently started seeing an increasing number of Deadlock exceptions coming out of the database, nowadays we see 10-20 a day. The imporant thing to note here is that these happen when the values are NOT changing. Here's all the relevant info: Table Def: CREATE TABLE [dbo].[MarketDataCurrent]( [MDID] [int] NOT NULL, [LastUpdate] [datetime] NOT NULL, [Value] [float] NOT NULL, [Source] [varchar](20) NULL, CONSTRAINT [PK_MarketDataCurrent] PRIMARY KEY CLUSTERED ( [MDID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] - I've got a Sql Profiler Trace Running, catching the deadlocks, and here's what all the graphs look like. Process 258 is called the following 'BulkUpsert' stored proc, repeatedly, while 73 is calling the next one: ALTER proc [dbo].[MarketDataCurrent_BulkUpload] @updateTime datetime, @source varchar(10) as begin transaction update c with (rowlock) set LastUpdate = getdate(), Value = t.Value, Source = @source from MarketDataCurrent c INNER JOIN #MDTUP t ON c.MDID = t.mdid where c.lastUpdate < @updateTime and c.mdid not in (select mdid from MarketData where LiveFeedTicker is not null and PriceSource like 'LiveFeed.%') and c.value <> t.value insert into MarketDataCurrent with (rowlock) select MDID, getdate(), Value, @source from #MDTUP where mdid not in (select mdid from MarketDataCurrent with (nolock)) and mdid not in (select mdid from MarketData where LiveFeedTicker is not null and PriceSource like 'LiveFeed.%') commit And the other one: ALTER PROCEDURE [dbo].[MarketDataCurrent_LiveFeedUpload] AS begin transaction -- Update existing mdid UPDATE c WITH (ROWLOCK) SET LastUpdate = t.LastUpdate, Value = t.Value, Source = t.Source FROM MarketDataCurrent c INNER JOIN #TEMPTABLE2 t ON c.MDID = t.mdid; -- Insert new MDID INSERT INTO MarketDataCurrent with (ROWLOCK) SELECT * FROM #TEMPTABLE2 WHERE MDID NOT IN (SELECT MDID FROM MarketDataCurrent with (NOLOCK)) -- Clean up the temp table DELETE #TEMPTABLE2 commit To clarify, those Temp Tables are being created by the C# code on the same connection and are populated using the C# SqlBulkCopy class. To me it looks like it's deadlocking on the PK of the table, so I tried removing that PK and switching to a Unique Constraint instead but that increased the number of deadlocks 10-fold. I'm totally lost as to what to do about this situation and am open to just about any suggestion. HELP!! In response to the request for the XDL, here it is: <deadlock-list> <deadlock victim="processc19978"> <process-list> <process id="processaf0b68" taskpriority="0" logused="0" waitresource="KEY: 6:72057594090487808 (d900ed5a6cc6)" waittime="718" ownerId="1102128174" transactionname="user_transaction" lasttranstarted="2010-06-11T16:30:44.750" XDES="0xffffffff817f9a40" lockMode="U" schedulerid="3" kpid="8228" status="suspended" spid="73" sbid="0" ecid="0" priority="0" transcount="2" lastbatchstarted="2010-06-11T16:30:44.750" lastbatchcompleted="2010-06-11T16:30:44.750" clientapp=".Net SqlClient Data Provider" hostname="RISKAPPS_VM" hostpid="3836" loginname="RiskOpt" isolationlevel="read committed (2)" xactid="1102128174" currentdb="6" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128056"> <executionStack> <frame procname="MKP_RISKDB.dbo.MarketDataCurrent_BulkUpload" line="28" stmtstart="1062" stmtend="1720" sqlhandle="0x03000600a28e5e4ef4fd8e00849d00000100000000000000"> UPDATE c WITH (ROWLOCK) SET LastUpdate = getdate(), Value = t.Value, Source = @source FROM MarketDataCurrent c INNER JOIN #MDTUP t ON c.MDID = t.mdid WHERE c.lastUpdate &lt; @updateTime and c.mdid not in (select mdid from MarketData where BloombergTicker is not null and PriceSource like &apos;Blbg.%&apos;) and c.value &lt;&gt; t.value </frame> <frame procname="adhoc" line="1" stmtstart="88" sqlhandle="0x01000600c1653d0598706ca7000000000000000000000000"> exec MarketDataCurrent_BulkUpload @clearBefore, @source </frame> <frame procname="unknown" line="1" sqlhandle="0x000000000000000000000000000000000000000000000000"> unknown </frame> </executionStack> <inputbuf> (@clearBefore datetime,@source nvarchar(10))exec MarketDataCurrent_BulkUpload @clearBefore, @source </inputbuf> </process> <process id="processc19978" taskpriority="0" logused="0" waitresource="KEY: 6:72057594090487808 (74008e31572b)" waittime="718" ownerId="1102128228" transactionname="user_transaction" lasttranstarted="2010-06-11T16:30:44.780" XDES="0x380be9d8" lockMode="U" schedulerid="5" kpid="8464" status="suspended" spid="248" sbid="0" ecid="0" priority="0" transcount="2" lastbatchstarted="2010-06-11T16:30:44.780" lastbatchcompleted="2010-06-11T16:30:44.780" clientapp=".Net SqlClient Data Provider" hostname="RISKBBG_VM" hostpid="4480" loginname="RiskOpt" isolationlevel="read committed (2)" xactid="1102128228" currentdb="6" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128056"> <executionStack> <frame procname="MKP_RISKDB.dbo.MarketDataCurrentBlbgRtUpload" line="14" stmtstart="840" stmtend="1220" sqlhandle="0x03000600005f9d24c8878f00849d00000100000000000000"> UPDATE c WITH (ROWLOCK) SET LastUpdate = t.LastUpdate, Value = t.Value, Source = t.Source FROM MarketDataCurrent c INNER JOIN #TEMPTABLE2 t ON c.MDID = t.mdid; -- Insert new MDID </frame> <frame procname="adhoc" line="1" sqlhandle="0x010006004a58132228bf8d73000000000000000000000000"> MarketDataCurrentBlbgRtUpload </frame> </executionStack> <inputbuf> MarketDataCurrentBlbgRtUpload </inputbuf> </process> </process-list> <resource-list> <keylock hobtid="72057594090487808" dbid="6" objectname="MKP_RISKDB.dbo.MarketDataCurrent" indexname="PK_MarketDataCurrent" id="lock5ba77b00" mode="U" associatedObjectId="72057594090487808"> <owner-list> <owner id="processc19978" mode="U"/> </owner-list> <waiter-list> <waiter id="processaf0b68" mode="U" requestType="wait"/> </waiter-list> </keylock> <keylock hobtid="72057594090487808" dbid="6" objectname="MKP_RISKDB.dbo.MarketDataCurrent" indexname="PK_MarketDataCurrent" id="lock65dca340" mode="U" associatedObjectId="72057594090487808"> <owner-list> <owner id="processaf0b68" mode="U"/> </owner-list> <waiter-list> <waiter id="processc19978" mode="U" requestType="wait"/> </waiter-list> </keylock> </resource-list> </deadlock> </deadlock-list>

    Read the article

  • Move OS from RAID5 array to RAID 1 arrays

    - by Antoine
    I want to give a last boost to my old ProLiant ML350 G5 server which just needs to be reliable for a few more year only ! With a defined budget of about 1500$ (I do not have more), i plan to replace the CPU (+ adding a second one), the battery cache of my raid controller (E200i), double the RAM, and change all hard drives. I have 7 HDD (SAS 10krpm, 72Gb) + 1 spare in RAID5, and my system is all FULL (no empty tray, full disks). in my current RAID5 array, I have 2 partitions: - 1 OS partition, 20Gb - 1 data partition, 350 Gb I plan to replace these 8 disks with : - 2 x 300Gb SAS 15krpm in RAID 1 (= 1 partition for OS) - 2 x 2Tb SATA 7.2krpm in RAID 1 (= 1 partition for DATA) My biggest constraint is that I have only 01 day to upgrade my server. Therefore, I'm looking for cloning all my files (OS + data partition) to my new arrays, i.e : - the OS partition shall be cloned to the RAID1 "2x300Gb array" - the data partition shall be cloned to the RAID1 "2x2Tb array" My second problem is that I need to physically remove all the old hard drives before inserting the new ones. I'm running Windows Server 2003 R2, and even if MS support will expire soon, I cannot buy a new licence and spent time in configuration. Obviously, with 1500$, I cannot also buy a new server that I could start configuring from now ! Thought about ASR (NTBackup), but I have no floppy drive (and do not really want to invest in one !) Thought about a clonezilla clone, and read this interesting link : Windows Server 2003 - move C: partition to a new SAS disk , but i'm not so confident in using Clonezilla with RAID5. What should be the best option to quickly and easily (if possible!) "copy/paste" my OS (so no need to reinstall and reconfigure all) and DATA / programs / services, etc... ? Thanks for your comments

    Read the article

  • JBoss https on port other than 8080 not working

    - by MilindaD
    We have a server with two JBoss instances where one runs on 8080, the other on 8081. We need to have HTTPS enabled for the 8081 server, firstly we tried enabling https on the 8080 port instance by generating the keystore and editing the server.xml and it successfully worked. However when we tried the same thing for 8081 it did not, note that we removed https for the 8080 server first before enabling it for 8081. This is what was used for both server.xml for 8080 and 8081. The only difference was that the port was changed from 8080 to 8081 when trying to enable https for 8081 port instance. What am I doing wrong and what needs to be changed? NOTE : When I meant enabled for 8080 I meant when you visit https:// URL:8484 you will actually be visiting the 8080 port instance. However when ssl is enabled for 8081 and I visit https:// URL:8484 I get that the web page is unavailable. COMMENTLESS VERSION <Server> <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> <Listener className="org.apache.catalina.core.JasperListener" /> <Service name="jboss.web"> <!-- https --> <Connector port="8080" address="${jboss.bind.address}" maxThreads="350" maxHttpHeaderSize="8192" emptySessionPath="true" protocol="HTTP/1.1" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" compression="on" ompressableMimeType="text/html,text/css,text/javascript,application/json,text/xml,text/plain,application/x-javascript,application/javascript"/> <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" address="${jboss.bind.address}" keystoreFile="${jboss.server.home.dir}/conf/supun1.keystore" keystorePass="aaaaaa" truststoreFile="${jboss.server.home.dir}/conf/supun1.keystore" truststorePass="aaaaaa" /> <!-- https1 --> <Connector port="8009" address="${jboss.bind.address}" protocol="AJP/1.3" emptySessionPath="true" enableLookups="false" redirectPort="8443" /> <Engine name="jboss.web" defaultHost="localhost" jvmRoute="khms1"> <Realm className="org.jboss.web.tomcat.security.JBossSecurityMgrRealm" certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping" allRolesMode="authOnly" /> <Host name="localhost" autoDeploy="false" deployOnStartup="false" deployXML="false" configClass="org.jboss.web.tomcat.security.config.JBossContextConfig" > <Valve className="org.jboss.web.tomcat.service.sso.ClusteredSingleSignOn" /> <Valve className="org.jboss.web.tomcat.service.jca.CachedConnectionValve" cachedConnectionManagerObjectName="jboss.jca:service=CachedConnectionManager" transactionManagerObjectName="jboss:service=TransactionManager" /> </Host> </Engine> </Service> </Server> WITH COMMENTS VERSION <Server> <!--APR library loader. Documentation at /docs/apr.html --> <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> <!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html --> <Listener className="org.apache.catalina.core.JasperListener" /> <!-- Use a custom version of StandardService that allows the connectors to be started independent of the normal lifecycle start to allow web apps to be deployed before starting the connectors. --> <Service name="jboss.web"> <!-- A "Connector" represents an endpoint by which requests are received and responses are returned. Documentation at : Java HTTP Connector: /docs/config/http.html (blocking & non-blocking) Java AJP Connector: /docs/config/ajp.html APR (HTTP/AJP) Connector: /docs/apr.html Define a non-SSL HTTP/1.1 Connector on port 8080 --> <Connector port="8080" address="${jboss.bind.address}" maxThreads="350" maxHttpHeaderSize="8192" emptySessionPath="true" protocol="HTTP/1.1" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" compression="on" ompressableMimeType="text/html,text/css,text/javascript,application/json,text/xml,text/plain,application/x-javascript,application/javascript"/> <!-- Define a SSL HTTP/1.1 Connector on port 8443 This connector uses the JSSE configuration, when using APR, the connector should be using the OpenSSL style configuration described in the APR documentation --> <!-- <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" keystoreFile="${jboss.server.home.dir}/conf/zara.keystore" keystorePass="zara2010" clientAuth="false" sslProtocol="TLS" compression="on" /> --> <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" address="${jboss.bind.address}" keystoreFile="${jboss.server.home.dir}/conf/supun1.keystore" keystorePass="aaaaaa" truststoreFile="${jboss.server.home.dir}/conf/supun1.keystore" truststorePass="aaaaaa" /> <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8009" address="${jboss.bind.address}" protocol="AJP/1.3" emptySessionPath="true" enableLookups="false" redirectPort="8443" /> <Engine name="jboss.web" defaultHost="localhost" jvmRoute="khms1"> <!-- The JAAS based authentication and authorization realm implementation that is compatible with the jboss 3.2.x realm implementation. - certificatePrincipal : the class name of the org.jboss.security.auth.certs.CertificatePrincipal impl used for mapping X509[] cert chains to a Princpal. - allRolesMode : how to handle an auth-constraint with a role-name=*, one of strict, authOnly, strictAuthOnly + strict = Use the strict servlet spec interpretation which requires that the user have one of the web-app/security-role/role-name + authOnly = Allow any authenticated user + strictAuthOnly = Allow any authenticated user only if there are no web-app/security-roles --> <Realm className="org.jboss.web.tomcat.security.JBossSecurityMgrRealm" certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping" allRolesMode="authOnly" /> <!-- A subclass of JBossSecurityMgrRealm that uses the authentication behavior of JBossSecurityMgrRealm, but overrides the authorization checks to use JACC permissions with the current java.security.Policy to determine authorized access. - allRolesMode : how to handle an auth-constraint with a role-name=*, one of strict, authOnly, strictAuthOnly + strict = Use the strict servlet spec interpretation which requires that the user have one of the web-app/security-role/role-name + authOnly = Allow any authenticated user + strictAuthOnly = Allow any authenticated user only if there are no web-app/security-roles <Realm className="org.jboss.web.tomcat.security.JaccAuthorizationRealm" certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping" allRolesMode="authOnly" /> --> <Host name="localhost" autoDeploy="false" deployOnStartup="false" deployXML="false" configClass="org.jboss.web.tomcat.security.config.JBossContextConfig" > <!-- Uncomment to enable request dumper. This Valve "logs interesting contents from the specified Request (before processing) and the corresponding Response (after processing). It is especially useful in debugging problems related to headers and cookies." --> <!-- <Valve className="org.apache.catalina.valves.RequestDumperValve" /> --> <!-- Access logger --> <!-- <Valve className="org.apache.catalina.valves.AccessLogValve" prefix="localhost_access_log." suffix=".log" pattern="common" directory="${jboss.server.log.dir}" resolveHosts="false" /> --> <!-- Uncomment to enable single sign-on across web apps deployed to this host. Does not provide SSO across a cluster. If this valve is used, do not use the JBoss ClusteredSingleSignOn valve shown below. A new configuration attribute is available beginning with release 4.0.4: cookieDomain configures the domain to which the SSO cookie will be scoped (i.e. the set of hosts to which the cookie will be presented). By default the cookie is scoped to "/", meaning the host that presented it. Set cookieDomain to a wider domain (e.g. "xyz.com") to allow an SSO to span more than one hostname. --> <!-- <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> --> <!-- Uncomment to enable single sign-on across web apps deployed to this host AND to all other hosts in the cluster. If this valve is used, do not use the standard Tomcat SingleSignOn valve shown above. Valve uses a JBossCache instance to support SSO credential caching and replication across the cluster. The JBossCache instance must be configured separately. By default, the valve shares a JBossCache with the service that supports HttpSession replication. See the "jboss-web-cluster-service.xml" file in the server/all/deploy directory for cache configuration details. Besides the attributes supported by the standard Tomcat SingleSignOn valve (see the Tomcat docs), this version also supports the following attributes: cookieDomain see above treeCacheName JMX ObjectName of the JBossCache MBean used to support credential caching and replication across the cluster. If not set, the default value is "jboss.cache:service=TomcatClusteringCache", the standard ObjectName of the JBossCache MBean used to support session replication. --> <Valve className="org.jboss.web.tomcat.service.sso.ClusteredSingleSignOn" /> <!-- Check for unclosed connections and transaction terminated checks in servlets/jsps. Important: The dependency on the CachedConnectionManager in META-INF/jboss-service.xml must be uncommented, too --> <Valve className="org.jboss.web.tomcat.service.jca.CachedConnectionValve" cachedConnectionManagerObjectName="jboss.jca:service=CachedConnectionManager" transactionManagerObjectName="jboss:service=TransactionManager" /> </Host> </Engine> </Service> </Server>

    Read the article

  • ProCurve ACL to prevent a subnet from leaving the switch

    - by kce
    I have a single HP ProCurve 2610 in a remote location that is connected in with the rest of the network via SHDSL. There are two Layer-3 networks on this segment. ACLs are setup to deny one subnet (192.0.2.0/24) from ever being able to leave the switch by virtue of being applied to port attached to the upstream connection. The other subnet should be permitted to freely leave the switch. Both subnets are on the same VLAN. Unfortunately SFlow very clearly show broadcast traffic from 192.0.2.0/24 on the upstream connection. ProCurve ACLs are not my strong suit but I feel like I'm missing something very simple here. ip access-list extended "Filter for Camera Network" deny ip 192.0.2.0 0.0.0.255 0.0.0.0 255.255.255.255 log permit ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255 exit interface 24 name "DSL - UPLINK" access-group "Filter for Camera Network" in exit Unless I am mistaken traffic from 192.0.2.0/24 should be dropped as it crosses the uplink port (int 24) whereas all other traffic will be permited by the following default allow rule. What exactly am I missing here? EDIT: Firstly, why do you have two subnets contained in the same VLAN? Because that's how it was configured by a previous administrator and while it makes conceptual sense that a single subnet is "mapped" to a single VLAN there's no technical constraint that I am aware of that makes this have to be the case. Instead of filtering inbound traffic on your uplink, you should be filtering outbound traffic. The HP2600 series can only filter inbound traffic on interfaces. Should I change my filter to deny any to 192.0.2.0/24?

    Read the article

  • Reverse web proxy with time constraints

    - by user2893458
    I have a web application which produces several unique URLs of the type http://service.company.com/service.html?type=aaaa&key=jfiZm6u6cW where the last part is a randomly generated key. Each such URL provides access to an instance of the service provided. I am looking for a way to restrict access to those URLs based on time constraints, as an example URL#1 should be available between 8:00AM and 10:00AM on May 30, URL#2 should be available between 10:30AM and 12:00PM on May 31, and so on. I already have a resource scheduling application based on Drupal and would like to find a way to include those URLs as scheduled resources. The web application is deployed on Apache Tomcat, so I don't have the knowledge or the resources to alter it, therefore I thought that I could put some sort of reverse proxy in front of the web app that could implement the time constraint feature. In my thoughts the reverse proxy would allow or disallow access to each URL based on the rules that my scheduling application would provide. There may be other ways to deliver such a solution, but I can't think of anything better, so the question is: is there a reverse web proxy architecture that could allow access to the destination URLs based on time and date rules? Any other ideas are more than welcome.

    Read the article

  • How can I import tasks into Project that have already been started?

    - by unknown
    I am writing a feature to import tasks from an online bug tracking / project management tool into Microsoft Project, primarily for resource leveling. Currently I am importing all tasks in as Fixed work, and giving them an assignment to a single resource for 100% of the work. The duration is then dynamically calculated, which at import time is equal to the amount of work. However, I am not a project manager by any means, and am having difficulty on how to get the start dates to calculate correctly. I've never used Project either. I am using Schedule From Start and setting the Project Start Date to the date the contract was signed / work was approved. However, this can be in the past, and I do not want current tasks scheduled from that date. Should it be today then? Another problem I have is with tasks that were already started. I have remaining work set, and I was placing a constraint on them to be started on the day the work was first applied. However, the remaining work for the task would be scheduled from that date, which was sometimes in the past. Using task constraints, a project start date, and whatever other settings available to me that I don't know about, what is the correct way to have the tasks scheduled?

    Read the article

  • What are developer's problems with helpful error messages?

    - by Moo-Juice
    It continue to astounds me that, in this day and age, products that have years of use under their belt, built by teams of professionals, still to this day - fail to provide helpful error messages to the user. In some cases, the addition of just a little piece of extra information could save a user hours of trouble. A program that generates an error, generated it for a reason. It has everything at its disposal to inform the user as much as it can, why something failed. And yet it seems that providing information to aid the user is a low-priority. I think this is a huge failing. One example is from SQL Server. When you try and restore a database that is in use, it quite rightly won't let you. SQL Server knows what processes and applications are accessing it. Why can't it include information about the process(es) that are using the database? I know not everyone passes an Applicatio_Name attribute on their connection string, but even a hint about the machine in question could be helpful. Another candidate, also SQL Server (and mySQL) is the lovely string or binary data would be truncated error message and equivalents. A lot of the time, a simple perusal of the SQL statement that was generated and the table shows which column is the culprit. This isn't always the case, and if the database engine picked up on the error, why can't it save us that time and just tells us which damned column it was? On this example, you could argue that there may be a performance hit to checking it and that this would impede the writer. Fine, I'll buy that. How about, once the database engine knows there is an error, it does a quick comparison after-the-fact, between values that were going to be stored, versus the column lengths. Then display that to the user. ASP.NET's horrid Table Adapters are also guilty. Queries can be executed and one can be given an error message saying that a constraint somewhere is being violated. Thanks for that. Time to compare my data model against the database, because the developers are too lazy to provide even a row number, or example data. (For the record, I'd never use this data-access method by choice, it's just a project I have inherited!). Whenever I throw an exception from my C# or C++ code, I provide everything I have at hand to the user. The decision has been made to throw it, so the more information I can give, the better. Why did my function throw an exception? What was passed in, and what was expected? It takes me just a little longer to put something meaningful in the body of an exception message. Hell, it does nothing but help me whilst I develop, because I know my code throws things that are meaningful. One could argue that complicated exception messages should not be displayed to the user. Whilst I disagree with that, it is an argument that can easily be appeased by having a different level of verbosity depending on your build. Even then, the users of ASP.NET and SQL Server are not your typical users, and would prefer something full of verbosity and yummy information because they can track down their problems faster. Why to developers think it is okay, in this day and age, to provide the bare minimum amount of information when an error occurs? It's 2011 guys, come on.

    Read the article

  • Floating Panels and Describe Windows in Oracle SQL Developer

    - by thatjeffsmith
    One of the challenges I face as I try to share tips about our software is that I tend to assume there are features that you just ‘know about.’ Either they’re so intuitive that you MUST know about them, or it’s a feature that I’ve been using for so long I forget that others may have never even seen it before. I want to cover two of those today - Describe (DESC) – SHIFT+F4 Floating Panels My super-exciting desktop SQL Developer and Describe DESC or Describe is an Oracle SQL*Plus command. It shows what a table or view is composed of in terms of it’s column definition. Here’s an example: SQL*Plus: Release 11.2.0.3.0 Production on Fri Sep 21 14:25:37 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - Production With the Partitioning, OLAP, Data Mining and Real Application Testing options SQL> desc beer; Name Null? Type ----------------------------------------- -------- ---------------------------- BREWERY NOT NULL VARCHAR2(100) CITY VARCHAR2(100) STATE VARCHAR2(100) COUNTRY VARCHAR2(100) ID NUMBER SQL> You can get the same information – and a good bit more – in SQL Developer using the SQL Developer DESC command. You invoke it with SHIFT+F4. It will open a floating (non-modal!) window with the information you want. Here’s an example: I can see my column definitions, constratins, stats, privs, etc A few ‘cool’ things you should be aware of: I can open as many as I want, and still work in my worksheet, browser, etc. I can also DESC an index, user, or most any other database object I can of course move them off my primary desktop display The DESC panel’s are read-only. I can’t drop a constraint from within the DESC window of a given table. But for dragging columns into my worksheet, and checking out the stats for my objects as I query them – it’s very, very handy. Try This Right Now Type ‘scott.emp’ (or some other table you have), place your cursor on the text, and hit SHIFT+F4. You’ll see the EMP object open. Now click into a column name in the columns page. Drag it into your worksheet. It will paste that column name into your query. This is an alternative for those that don’t like our code insight feature or dragging columns off the connection tree (new for v3.2!) Got it? SQL Developer’s Floating Panels Ok, let’s talk about a similar feature. Did you know that any dockable panel from the View menu can also be ‘floated?’ One of my favorite features is the SQL History. Every query I run is recorded, and I can recall them later without having to remember what I ran and when. And I USUALLY use the keyboard shortcuts for this. Let your trouble float away…if only it were so easy as a right-click in the real world. But sometimes I still want to see my recall list without having to give up my screen real estate. So I just mouse-right click on the panel tab and select ‘Float.’ Then I move it over to my secondary display – see the poorly lit picture in the beginning of this post. And that’s it. Simple, I know. But I thought you should know about these two things!

    Read the article

  • Silverlight Cream for March 09, 2011 -- #1057

    - by Dave Campbell
    In this Issue: Dennis Doomen, Peter Kuhn, Michael Crump, Joe McBride, Martin Krüger, Jeremy Likness, Manas Patnaik, Jesse Liberty(-2-), WindowsPhoneGeek(-2-). Above the Fold: Silverlight: "A highlighting AutoCompleteBox in Silverlight" Peter Kuhn WP7: "WP7 WatermarkedTextBox custom control" WindowsPhoneGeek Training: "" Shoutouts: Karl Shifflett announced that he and Josh Smith have heard the developers and released a demo: Mole 2010 Demo Released This is a somewhat older post, but the material is good and I was reminded of it while talking to Josh Smith at the MVP summit last week: Advanced MVVM ... money well-spent From SilverlightCream.com: Introducing the Silverlight Cookbook Dennis Doomen unveils a Codeplex site "containing a Silverlight 4 app that includes most of the complexities you might run into" ... I'm tagging this in my WynApse outlookbar... great stuff, Dennis! A highlighting AutoCompleteBox in Silverlight Peter Kuhn took on a task in response to a forum query and created a highlighting AutoCompleteBox, and is giving it to us... this really looks cool, Peter, and great explanation. Taking a look at the Mindscape Phone Elements for WP7. Michael Crump takes a good look at the Mindscape Phone Elements for WP7... and if you read closely you might still be able to get a free license! Windows Phone – “Can’t connect to your phone. Disconnect it, Restart it, then try connecting again.” Joe McBride explains a way out of an issue that many should be seeing as we repave or replace machines... how to get our device recognized on the updated machine... without giving cryptic messages. How to: only with the full visibility of an application in the browser window start an action Martin Krüger continues his journey in starting storyboards and tackles the condition that the application is completely in the browser window prior to the storyboard starting. A Numeric Input Control for Windows Phone 7 Jeremy Likness came up with a great idea for numeric input for WP7 ... you'll smile when you see it, but what a great idea... and a NumericTextBox to go along with it. Performing CRUD on Relational Data (Multiple table) using RIA in SL4 Manas Patnaik has a post up that breaks the normal blog post or demo mold by having two tables with a relational constraint and doing CRUD operations on them. Plenty of diagrams and good information. Select Many: Reactive Extensions’ Mother Of All Operators [Chaining] Jesse Liberty has part 9 in his Rx series up, and is looking at SelectMany this time, and chaining calls. He's using WPF for the sample, but the goodness is all there for us Silverlight guys too. The Full Stack 8–Adding Search to the Phone Client Jesse Liberty and Jon Galloway have part 8 of their Full Stack series up ... this is the MVC3, ASP.NET, Silverlight, and WP7 app development series... this time out they're putting Search in the Phone client. All about ResourceDictionary in WP7 WindowsPhoneGeek is discussing ResourceDictionaries in this post... beginning with What is a ResourceDictionary and continuing out through creating and using one, plus a good comment on merging. WP7 WatermarkedTextBox custom control In his next post, WindowsPhoneGeek walks us through the creation of a WatermarkedTextBox for WP7 right from the derivation from TextBox... very nice tutorial and lots of code/examples. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • AdventureWorks2012 now available for all on SQL Azure

    - by jamiet
    Three days ago I tweeted this: Idea. MSFT could host read-only copies of all the [AdventureWorks] DBs up on #sqlazure for the SQL community to use. RT if agree #sqlfamily — Jamie Thomson (@jamiet) March 24, 2012 Evidently I wasn't the only one that thought this was a good idea because as you can see from the screenshot that tweet has, so far, been retweeted more than fifty times. Clearly there is a desire to see the AdventureWorks databases made available for the community to noodle around on so I am pleased to announce that as of today you can do just that - [AdventureWorks2012] now resides on SQL Azure and is available for anyone, absolutely anyone, to connect to and use* for their own means. *By use I mean "issue some SELECT statements". You don't have permission to issue INSERTs, UPDATEs, DELETEs or EXECUTEs I'm afraid - if you want to do that then you can get the bits and host it yourself. This database is free for you to use but SQL Azure is of course not free so before I give you the credentials please lend me your ears eyes for a short while longer. AdventureWorks on Azure is being provided for the SQL Server community to use and so I am hoping that that same community will rally around to support this effort by making a voluntary donation to support the upkeep which, going on current pricing, is going to be $119.88 per year. If you would like to contribute to keep AdventureWorks on Azure up and running for that full year please donate via PayPal to [email protected]: Any amount, no matter how small, will help. If those 50+ people that retweeted me beforehand all contributed $2 then that would just about be enough to keep this up for a year. If the community contributes more that we need then there are a number of additional things that could be done: Host additional databases (Northwind anyone??) Host in more datacentres (this first one is in Western Europe) Make a charitable donation That last one, a charitable donation, is something I would really like to do. The SQL Community have proved before that they can make a significant contribution to charitable orgnisations through purchasing the SQL Server MVP Deep Dives book and I harbour hopes that AdventureWorks on Azure can continue in that vein. So please, if you think AdventureWorks on Azure is something that is worth supporting please make a contribution. OK, with the prickly subject of begging for cash out of the way let me share the details that you need to connect to [AdventureWorks2012] on SQL Azure: Server mhknbn2kdz.database.windows.net  Database AdventureWorks2012 User sqlfamily Password sqlf@m1ly That user sqlfamily has all the permissions required to enable you to query away to your heart's content. Here is the code that I used to set it up: CREATE USER sqlfamily FOR LOGIN sqlfamily;CREATE ROLE sqlfamilyrole;EXEC sp_addrolemember 'sqlfamilyrole','sqlfamily';GRANT VIEW DEFINITION ON Database::AdventureWorks2012 TO sqlfamilyrole;GRANT VIEW DATABASE STATE ON Database::AdventureWorks2012 TO sqlfamilyrole;GRANT SHOWPLAN TO sqlfamilyrole;EXEC sp_addrolemember 'db_datareader','sqlfamilyrole'; You can connect to the database using SQL Server Management Studio (instructions to do that are provided at Walkthrough: Connecting to SQL Azure via the SSMS) or you can use the web interface at https://mhknbn2kdz.database.windows.net: Lastly, just for a bit of fun I created a table up there called [dbo].[SqlFamily] into which you can leave a small calling card. Simply execute the following SQL statement (changing the values of course): INSERT [dbo].[SqlFamily]([Name],[Message],[TwitterHandle],[BlogURI])VALUES ('Your name here','Some Message','your twitter handle (optional)','Blog URI (optional)'); [Id] is an IDENTITY field and there is a default constraint on [DT] hence there is no need to supply a value for those. Note that you only have INSERT permissions, not UPDATE or DELETE so make sure you get it right first time! Any offensive or distasteful remarks will of course be deleted :) Thank you for reading this far and have fun using AdventureWorks on Azure. I hope it proves to be useful for some of you. @jamiet AdventureWorks on Azure - Provided by the SQL Server community, for the SQL Server community!

    Read the article

  • Script to UPDATE STATISTICS with time window

    - by Bill Graziano
    I recently spent some time troubleshooting odd query plans and came to the conclusion that we needed better statistics.  We’ve been running sp_updatestats but apparently it wasn’t sampling enough of the table to get us what we needed.  I have a pretty limited window at night where I can hammer the disks while this runs.  The script below just calls UPDATE STATITICS on all tables that “need” updating.  It defines need as any table whose statistics are older than the number of days you specify (30 by default).  It also has a throttle so it breaks out of the loop after a set amount of time (60 minutes).  That means it won’t start processing a new table after this time but it might take longer than this to finish what it’s doing.  It always processes the oldest statistics first so it will eventually get to all of them.  It defaults to sample 25% of the table.  I’m not sure that’s a good default but it works for now.  I’ve tested this in SQL Server 2005 and SQL Server 2008.  I liked the way Michelle parameterized her re-index script and I took the same approach. CREATE PROCEDURE dbo.UpdateStatistics ( @timeLimit smallint = 60 ,@debug bit = 0 ,@executeSQL bit = 1 ,@samplePercent tinyint = 25 ,@printSQL bit = 1 ,@minDays tinyint = 30 )AS/******************************************************************* Copyright Bill Graziano 2010*******************************************************************/SET NOCOUNT ON;PRINT '[ ' + CAST(GETDATE() AS VARCHAR(100)) + ' ] ' + 'Launching...'IF OBJECT_ID('tempdb..#status') IS NOT NULL DROP TABLE #status;CREATE TABLE #status( databaseID INT , databaseName NVARCHAR(128) , objectID INT , page_count INT , schemaName NVARCHAR(128) Null , objectName NVARCHAR(128) Null , lastUpdateDate DATETIME , scanDate DATETIME CONSTRAINT PK_status_tmp PRIMARY KEY CLUSTERED(databaseID, objectID));DECLARE @SQL NVARCHAR(MAX);DECLARE @dbName nvarchar(128);DECLARE @databaseID INT;DECLARE @objectID INT;DECLARE @schemaName NVARCHAR(128);DECLARE @objectName NVARCHAR(128);DECLARE @lastUpdateDate DATETIME;DECLARE @startTime DATETIME;SELECT @startTime = GETDATE();DECLARE cDB CURSORREAD_ONLYFOR select [name] from master.sys.databases where database_id > 4OPEN cDBFETCH NEXT FROM cDB INTO @dbNameWHILE (@@fetch_status <> -1)BEGIN IF (@@fetch_status <> -2) BEGIN SELECT @SQL = ' use ' + QUOTENAME(@dbName) + ' select DB_ID() as databaseID , DB_NAME() as databaseName ,t.object_id ,sum(used_page_count) as page_count ,s.[name] as schemaName ,t.[name] AS objectName , COALESCE(d.stats_date, ''1900-01-01'') , GETDATE() as scanDate from sys.dm_db_partition_stats ps join sys.tables t on t.object_id = ps.object_id join sys.schemas s on s.schema_id = t.schema_id join ( SELECT object_id, MIN(stats_date) as stats_date FROM ( select object_id, stats_date(object_id, stats_id) as stats_date from sys.stats) as d GROUP BY object_id ) as d ON d.object_id = t.object_id where ps.row_count > 0 group by s.[name], t.[name], t.object_id, COALESCE(d.stats_date, ''1900-01-01'') ' SET ANSI_WARNINGS OFF; Insert #status EXEC ( @SQL); SET ANSI_WARNINGS ON; END FETCH NEXT FROM cDB INTO @dbNameENDCLOSE cDBDEALLOCATE cDBDECLARE cStats CURSORREAD_ONLYFOR SELECT databaseID , databaseName , objectID , schemaName , objectName , lastUpdateDate FROM #status WHERE DATEDIFF(dd, lastUpdateDate, GETDATE()) >= @minDays ORDER BY lastUpdateDate ASC, page_count desc, [objectName] ASC OPEN cStatsFETCH NEXT FROM cStats INTO @databaseID, @dbName, @objectID, @schemaName, @objectName, @lastUpdateDateWHILE (@@fetch_status <> -1)BEGIN IF (@@fetch_status <> -2) BEGIN IF DATEDIFF(mi, @startTime, GETDATE()) > @timeLimit BEGIN PRINT '[ ' + CAST(GETDATE() AS VARCHAR(100)) + ' ] ' + '*** Time Limit Reached ***'; GOTO __DONE; END SELECT @SQL = 'UPDATE STATISTICS ' + QUOTENAME(@dBName) + '.' + QUOTENAME(@schemaName) + '.' + QUOTENAME(@ObjectName) + ' WITH SAMPLE ' + CAST(@samplePercent AS NVARCHAR(100)) + ' PERCENT;'; IF @printSQL = 1 PRINT '[ ' + CAST(GETDATE() AS VARCHAR(100)) + ' ] ' + @SQL + ' (Last Updated: ' + CAST(@lastUpdateDate AS VARCHAR(100)) + ')' IF @executeSQL = 1 BEGIN EXEC (@SQL); END END FETCH NEXT FROM cStats INTO @databaseID, @dbName, @objectID, @schemaName, @objectName, @lastUpdateDateEND__DONE:CLOSE cStatsDEALLOCATE cStatsPRINT '[ ' + CAST(GETDATE() AS VARCHAR(100)) + ' ] ' + 'Completed.'GO

    Read the article

  • Controlling server configurations with IPS

    - by barts
    I recently received a customer question regarding how they best could control which packages and which versions were used on their production Solaris 11 servers.  They had considered pointing each server at its own software repository - a common initial approach.  A simpler method leverages one of dependency mechanisms we introduced with Solaris 11, but is not immediately obvious to most people. Typically, most internal IT departments qualify particular versions for production use.  What this customer wanted to do was insure that their operations staff only installed internally qualified versions of Solaris on their servers.  The easiest way of doing this is to leverage the 'incorporate' type of dependency in a small package defined for each server type.  From the reference " Packaging and Delivering Software With the Image Packaging System in Oracle® Solaris 11.1":  The incorporate dependency specifies that if the given package is installed, it must be at the given version, to the given version accuracy. For example, if the dependent FMRI has a version of 1.4.3, then no version less than 1.4.3 or greater than or equal to 1.4.4 satisfies the dependency. Version 1.4.3.7 does satisfy this example dependency. The common way to use incorporate dependencies is to put many of them in the same package to define a surface in the package version space that is compatible. Packages that contain such sets of incorporate dependencies are often called incorporations. Incorporations are typically used to define sets of software packages that are built together and are not separately versioned. The incorporate dependency is heavily used in Oracle Solaris to ensurethat compatible versions of software are installed together. An example incorporate dependency is: depend type=incorporate fmri=pkg:/driver/network/ethernet/[email protected],5.11-0.175.0.0.0.2.1 So, to make sure only qualified versions are installed on a server, create a package that will be installed on the machines to be controlled.  This package will contain an incorporate dependency on the "entire" package, which controls the various components used to be build Solaris.  Every time a new version of Solaris has been qualified for production use, create a new version of this package specifying the new version of "entire" that was qualified.  Once this new control package is available in the repositories configured on the production server, the pkg update command will update that system to the specified version.  Unless a new version of the control package is made available, pkg update will report that no updates are available since no version of the control package can be installed that satisfies the incorporate constraint. Note that if desired, the same package can be used to specify which packages must be present on the system by adding either "require" or "group" dependencies; the latter permits removal of some of the packages, the former does not.  More details on this can be found in either the section 5 pkg man page or the previously mentioned reference document. This technique of using package dependencies to constrain system configuration leverages the SAT solver which is at the heart of IPS, and is basic to how we package Solaris itself.  

    Read the article

  • Find Rules and Defaults using the PowerShell for SQL Server 2008 Provider

    - by BuckWoody
    I ran into an issue the other day where I couldn't set up some features in SQL Server 2008 because they ddon't support the use of Rules or Defaults. Let me explain a little more about that. In older versions of SQL Server, you could decalre a "Rule" or "Default" just like you do with a Table Constraint today. You would then "bind" these rules or defaults to the tables you wanted them to apply to. Sure, there are advantages and disadvantages to this approach, but it certainly isn't standard Data Definition Language (DDL), so they are deprecated and many features don't work with them any more. Honestly, it's been so long since I've seen them in use I had forgotten to even check for them. My suspicion is that this was a new database created with an older script. Nevertheless, the feature failed when it ran into one. Immediately I thought that I had better build some logic into my process to try and catch those - but how? Lots of choices here, but since I was using PowerShell to do the rest of the work, I thought I would investigate how easy it would be just to do it there. And using the SQL Server 2008 provider, this could not be simpler. I won't show all of the scrupt here, because I was testing for these as a condition and then bailing out of the script and sending a notification, but all it is using is the DIR command! Here's an example on my "UNIVAC" computer for the "pubs" database: Find Rules using PowerShell: dir SQLSERVER:\SQL\UNIVAC\DEFAULT\Databases\pubs\Rulesdir SQLSERVER:\SQL\UNIVAC\DEFAULT\Databases\pubs\Defaults And this one will look in all databases:  #All Databases:dir SQLSERVER:\SQL\UNIVAC\DEFAULT\Databases | select-object -property Name, Rules, Defaults Awesome. Love me some PowerShell. Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. Yes, there are always multiple ways to do things, and this script may not work in every situation, for everything. It’s just a script, people. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately.       Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • RPi and Java Embedded GPIO: Big Data and Java Technology

    - by hinkmond
    Java Embedded and Big Data go hand-in-hand, especially as demonstrated by prototyping on a Raspberry Pi to show how well the Java Embedded platform can perform on a small embedded device which then becomes the proof-of-concept for industrial controllers, medical equipment, networking gear or any type of sensor-connected device generating large amounts of data. The key is a fast and reliable way to access that data using Java technology. In the previous blog posts you've seen the integration of a static electricity sensor and the Raspberry Pi through the GPIO port, then accessing that data through Java Embedded code. It's important to point out how this works and why it works well with Java code. First, the version of Linux (Debian Wheezy/Raspian) that is found on the RPi has a very convenient way to access the GPIO ports through the use of Linux OS managed file handles. This is key in avoiding terrible and complex coding using register manipulation in C code, or having to program in a less elegant and clumsy procedural scripting language such as python. Instead, using Java Embedded, allows a fast way to access those GPIO ports through those same Linux file handles. Java already has a very easy to program way to access file handles with a high degree of performance that matches direct access of those file handles with the Linux OS. Using the Java API java.io.FileWriter lets us open the same file handles that the Linux OS has for accessing the GPIO ports. Then, by first resetting the ports using the unexport and export file handles, we can initialize them for easy use in a Java app. // Open file handles to GPIO port unexport and export controls FileWriter unexportFile = new FileWriter("/sys/class/gpio/unexport"); FileWriter exportFile = new FileWriter("/sys/class/gpio/export"); ... // Reset the port unexportFile.write(gpioChannel); unexportFile.flush(); // Set the port for use exportFile.write(gpioChannel); exportFile.flush(); Then, another set of file handles can be used by the Java app to control the direction of the GPIO port by writing either "in" or "out" to the direction file handle. // Open file handle to input/output direction control of port FileWriter directionFile = new FileWriter("/sys/class/gpio/gpio" + gpioChannel + "/direction"); // Set port for input directionFile.write("in"); // Or, use "out" for output directionFile.flush(); And, finally, a RandomAccessFile handle can be used with a high degree of performance on par with native C code (only milliseconds to read in data and write out data) with low overhead (unlike python) to manipulate the data going in and out on the GPIO port, while the object-oriented nature of Java programming allows for an easy way to construct complex analytic software around that data access functionality to the external world. RandomAccessFile[] raf = new RandomAccessFile[GpioChannels.length]; ... // Reset file seek pointer to read latest value of GPIO port raf[channum].seek(0); raf[channum].read(inBytes); inLine = new String(inBytes); It's Big Data from sensors and industrial/medical/networking equipment meeting complex analytical software on a small constraint device (like a Linux/ARM RPi) where Java Embedded allows you to shine as an Embedded Device Software Designer. Hinkmond

    Read the article

  • Migrating a WebLogic Domain from a 32 to a 64 bit JVM/Architecture

    - by adejuanc
    Currently on 32 bit OS which presents a physical constraint when trying to allocate memory. By limit, a 32 bit OS, will not be able to allocate more than 3 GB on a Linux environment, or 2 GB for Windows environment (not considering Physical Address Extension (PAE) implementation, which can increase the maximum allocatable memory). When this limit is reached, a migration to a 64 bit architecture is recommended. Below are the steps on how to install a 64 WebLogic Server version, along with a 64 Bit JVM and then how to migrate the domain to this new environment. Weblogic Server Version: WebLogic Server Version: 10.3.4.0 OS: Linux adejuan-cl.cl.oracle.com 2.6.18-194.el5 #1 SMP Mon Jan 01 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux JVM:java version "1.6.0_22" Java(TM) SE Runtime Environment (build 1.6.0_22-b04) Oracle JRockit(R) (build R28.1.1-13-139783-1.6.0_22-20101206-0136-linux-x86_64, compiled mode) To create migration template: 1. Execute $<WLS_HOME>/wlserver_10.3/common/bin/config_builder.sh 2. Create Domain Template. 3. Select Domain to migrate. 4. Enter the name of template and other info. Click next. 5. Using Add Button, Select libraries you want to add under lib folder. copy jdbc data sources you would like to have under config/jdbc folder. If you want to have log4j configuration, copy log4j.xml under domain_root folder. 6. Select data base for the domain and click next. 7. Enter Admin Server Name and port numbers. Click next. 8. Enter username and password. Click next. Select No if you don want to add users/groups/roles 9. Click next until reach button create. This will create a jar file that is needed for the next action plan. To install and migrate domain to 64 bit architecture. 1. Install JVM Jrockit R28.1.1.13 on environment. (uncompress zip folder on a known location) 2. Go to JRockit_Home/bin and execute $ java -d64 -jar wls1034_generic.jar 3. When prompt, select JRockit JVM in browse menu, and wait for installation to finish. 4. Go to <WLS_HOME>/wlserver_10.3/common/bin and execute $ ./config.sh 5. Select Create a new Weblogic domain 6. Select Base this domain on an existing template and select browse. 7. Select jar file created on previous action plan. 8. Select Name of domain. Maintain in most cases. 9. Select user name and password. Maintain in most cases. 10. Select Jrockit SDK 1.6.0_22 and click next. 11. Confirm all JMS/JDBC/security configuration. 12. On select Optional Configuration, reconfigure if necessary. 13. Check on Configuration summary for all domain configuration. 14. Click on create, to finish up domain import. Note: Always when installing a 64 bit WLS, it's necessary to install first the 64 JVM and then run the generic installer with the -d64 bit option. If this is not performed, the installation will be the 32 default version. For more information, please refer: http://download.oracle.com/docs/cd/E13188_01/jrockit/docs50/dev_faq.html#pae

    Read the article

  • Web Developer - How to enhance my skillset?

    - by atif089
    First of all pardon my English. I am not a native English speaker I have been a Web Developer for the past 4 years. In these 4 years I have spent my time on the internet to learn things. My current skillset comprises of HTML CSS PHP MySQL jQuery (I would not say js and rather say jQuery because I am good at using jQuery and bad with plain javascript.) The above things seemed like an easier part of my life as I quickly learned them. But now I would really like to enhance my skillset and I am pretty confused which way to move ahead considering that I have to learn things using the web and references on my own. Design My first option is towards design. Shall I get started with design and start using Adobe Illustrator, Photoshop, Flash, Flex. Designing along with my previous skills looks like a money maker to me. As both are co-related to each other when web design is considered. And its easier to learn the first 2 and I hope I can get tutorials for the last 2 as well. Marketing A lot of my existing clients asked me if I do SEO. So this looked as a good field to me as well. I cannot estimate the scope of SEO but I assume it has a long future. Since I am business minded as well and there are a lot of tutorials around, should I start with SEO, SEM, Social Media, PPC or whatever it consists of. Software Development The complex plight and hardest thing (perhaps) but the easiest way to find a decent job in my location. If I go for software development what platform should be that I should be ideally going after? Should it be C# for windows development, or ASP.NET (once again enhances my skill set), J2EE (there are a lot of jobs for J2EE developers here) or plain C and C++. Also I think it is difficult to learn software languages right from Hello World, using internet? I have no clue how I learned PHP but I am sort of a pro now, but these other languages seems like a disaster to me? I cant figure out the reason if its because PHP is easier or there was a lot of tutorials around for PHP. Anyways is it also possible to learn software development right from Hello World using the web? Database / Server (Linux) / Network Administration Seems like a job with a decent pay but less number of jobs and a bit harder to learn online. (not sure) What should be the right track I should move ahead. P.S - Age is not a constraint for me as I am between 20-21, and I come from an IT background. I know quite little basics about C (upto structures) C++ (upto objects, I was not able to understand templates) Core Java (some basics and OOP concept) RDBMS Visual Basic 6 (used to do this long back) UNIX (a bunch of commands like who, finger, chmod, ls and a bit of #bash) Or is there anything else that I left out? I need you guys to please give me a feedback and the reason why I should select that field.

    Read the article

  • Should I manage authentication on my own if the alternative is very low in usability and I am already managing roles?

    - by rumtscho
    As a small in-house dev department, we only have experience with developing applications for our intranet. We use the existing Active Directory for user account management. It contains the accounts of all company employees and many (but not all) of the business partners we have a cooperation with. Now, the top management wants a technology exchange application, and I am the lead dev on the new project. Basically, it is a database containing our know-how, with a web frontend. Our employees, our cooperating business partners, and people who wish to become our cooperating business partners should have access to it and see what technologies we have, so they can trade for them with the department which owns them. The technologies are not patented, but very valuable to competitors, so the department bosses are paranoid about somebody unauthorized gaining access to their technology description. This constraint necessitates a nightmarishly complicated multi-dimensional RBAC-hybrid model. As the Active Directory doesn't even contain all the information needed to infer the roles I use, I will have to manage roles plus per-technology per-user granted access exceptions within my system. The current plan is to use Active Directory for authentication. This will result in a multi-hour registration process for our business partners where the database owner has to manually create logins in our Active Directory and send them credentials. If I manage the logins in my own system, we could improve the usability a lot, for example by letting people have an active (but unprivileged) account as soon as they register. It seems to me that, after I am having a users table in the DB anyway (and managing ugly details like storing historical user IDs so that recycled user IDs within the Active Directory don't unexpectedly get rights to view someone's technologies), the additional complexity from implementing authentication functionality will be minimal. Therefore, I am starting to lean towards doing my own user login management and forgetting the AD altogether. On the other hand, I see some reasons to stay with Active Directory. First, the conventional wisdom I have heard from experienced programmers is to not do your own user management if you can avoid it. Second, we have code I can reuse for connection to the active directory, while I would have to code the authentication if done in-system (and my boss has clearly stated that getting the project delivered on time has much higher priority than delivering a system with high usability). Third, I am not a very experienced developer (this is my first lead position) and have never done user management before, so I am afraid that I am overlooking some important reasons to use the AD, or that I am underestimating the amount of work left to do my own authentication. I would like to know if there are more reasons to go with the AD authentication mechanism. Specifically, if I want to do my own authentication, what would I have to implement besides a secure connection for the login screen (which I would need anyway even if I am only transporting the pw to the AD), lookup of a password hash and a mechanism for password recovery (which will probably include manual identity verification, so no need for complex mTAN-like solutions)? And, if you have experience with such security-critical systems, which one would you use and why?

    Read the article

  • Security Access Control With Solaris Virtualization

    - by Thierry Manfe-Oracle
    Numerous Solaris customers consolidate multiple applications or servers on a single platform. The resulting configuration consists of many environments hosted on a single infrastructure and security constraints sometimes exist between these environments. Recently, a customer consolidated many virtual machines belonging to both their Intranet and Extranet on a pair of SPARC Solaris servers interconnected through Infiniband. Virtual Machines were mapped to Solaris Zones and one security constraint was to prevent SSH connections between the Intranet and the Extranet. This case study gives us the opportunity to understand how the Oracle Solaris Network Virtualization Technology —a.k.a. Project Crossbow— can be used to control outbound traffic from Solaris Zones. Solaris Zones from both the Intranet and Extranet use an Infiniband network to access a ZFS Storage Appliance that exports NFS shares. Solaris global zones on both SPARC servers mount iSCSI LU exported by the Storage Appliance.  Non-global zones are installed on these iSCSI LU. With no security hardening, if an Extranet zone gets compromised, the attacker could try to use the Storage Appliance as a gateway to the Intranet zones, or even worse, to the global zones as all the zones are reachable from this node. One solution consists in using Solaris Network Virtualization Technology to stop outbound SSH traffic from the Solaris Zones. The virtualized network stack provides per-network link flows. A flow classifies network traffic on a specific link. As an example, on the network link used by a Solaris Zone to connect to the Infiniband, a flow can be created for TCP traffic on port 22, thereby a flow for the ssh traffic. A bandwidth can be specified for that flow and, if set to zero, the traffic is blocked. Last but not least, flows are created from the global zone, which means that even with root privileges in a Solaris zone an attacker cannot disable or delete a flow. With the flow approach, the outbound traffic of a Solaris zone is controlled from outside the zone. Schema 1 describes the new network setting once the security has been put in place. Here are the instructions to create a Crossbow flow as used in Schema 1 : (GZ)# zoneadm -z zonename halt ...halts the Solaris Zone. (GZ)# flowadm add-flow -l iblink -a transport=TCP,remote_port=22 -p maxbw=0 sshFilter  ...creates a flow on the IB partition "iblink" used by the zone to connect to the Infiniband.  This IB partition can be identified by intersecting the output of the commands 'zonecfg -z zonename info net' and 'dladm show-part'.  The flow is created on port 22, for the TCP traffic with a zero maximum bandwidth.  The name given to the flow is "sshFilter". (GZ)# zoneadm -z zonename boot  ...restarts the Solaris zone now that the flow is in place.Solaris Zones and Solaris Network Virtualization enable SSH access control on Infiniband (and on Ethernet) without the extra cost of a firewall. With this approach, no change is required on the Infiniband switch. All the security enforcements are put in place at the Solaris level, minimizing the impact on the overall infrastructure. The Crossbow flows come in addition to many other security controls available with Oracle Solaris such as IPFilter and Role Based Access Control, and that can be used to tackle security challenges.

    Read the article

  • Approach for packing 2D shapes while minimizing total enclosing area

    - by Dennis
    Not sure on my tags for this question, but in short .... I need to solve a problem of packing industrial parts into crates while minimizing total containing area. These parts are motors, or pumps, or custom-made components, and they have quite unusual shapes. For some, it may be possible to assume that a part === rectangular cuboid, but some are not so simple, i.e. they assume a shape more of that of a hammer or letter T. With those, (assuming 2D shape), by alternating direction of top & bottom, one can pack more objects into the same space, than if all tops were in the same direction. Crude example below with letter "T"-shaped parts: ***** xxxxx ***** x ***** *** ooo * x vs * x vs * x vs * x o * x * xxxxx * x * x o xxxxx xxx Right now we are solving the problem by something like this: using CAD software, make actual models of how things fit in crate boxes make estimates of actual crate dimensions & write them into Excel file (1) is crazy amount of work and as the result we have just a limited amount of possible entries in (2), the Excel file. The good things is that programming this is relatively easy. Given a combination of products to go into crates, we do a lookup, and if entry exists in the Excel (or Database), we bring it out. If it doesn't, we say "sorry, no data!". I don't necessarily want to go full force on making up some crazy algorithm that given geometrical part description can align, rotate, and figure out best part packing into a crate, given its shape, but maybe I do.. Question Well, here is my question: assuming that I can represent my parts as 2D (to be determined how), and that some parts look like letter T, and some parts look like rectangles, which algorithm can I use to give me a good estimate on the dimensions of the encompassing area, while ensuring that the parts are packed in a minimal possible area, to minimize crating/shipping costs? Are there approximation algorithms? Seeing how this can get complex, is there an existing library I could use? My thought / Approach My naive approach would be to define a way to describe position of parts, and place the first part, compute total enclosing area & dimensions. Then place 2nd part in 0 degree orientation, repeat, place it at 180 degree orientation, repeat (for my case I don't think 90 degree rotations will be meaningful due to long lengths of parts). Proceed using brute force "tacking on" other parts to the enclosing area until all parts are processed. I may have to shift some parts a tad (see 3rd pictorial example above with letters T). This adds a layer of 2D complexity rather than 1D. I am not sure how to approach this. One idea I have is genetic algorithms, but I think those will take up too much processing power and time. I will need to look out for shape collisions, as well as adding extra padding space, since we are talking about real parts with irregularities rather than perfect imaginary blocks. I'm afraid this can get geometrically messy fairly fast, and I'd rather keep things simple, if I can. But what if the best (practical) solution is to pack things into different crate boxes rather than just one? This can get a bit more tricky. There is human element involved as well, i.e. like parts can go into same box and are thus a constraint to be considered. Some parts that are not the same are sometimes grouped together for shipping and can be considered as a common grouped item. Sometimes customers want things shipped their way, which adds human element to constraints. so there will have to be some customization.

    Read the article

  • What Counts For a DBA – Depth

    - by Louis Davidson
    SQL Server offers very simple interfaces to many of its features. Most people could open up SSMS, connect to a server, write a simple query and see the results. Even several of the core DBA tasks are deceptively straightforward. It doesn’t take a rocket scientist to perform a basic database backup or run a trace (even using the newfangled Extended Events!). However, appearances can be deceptive, and often times it is really important that a DBA understands not just the basics of how to perform a task, but why we do a task, and how that task works. As an analogy, consider a child walking into a darkened room. Most would know that they need to turn on the light, and how to do it, so they flick the switch. But what happens if light fails to shine forth. Most would immediately tell you that you need to consider changing the light bulb. So you hop in the car and take them to the local home store and instruct them to buy a replacement. Confronted with a 40 foot display of light bulbs, how will they decide which of the hundreds of types of bulbs, of different types, fittings, shapes, colors, power and efficiency ratings, is the right choice? Obviously the main lesson the child is going to learn this day is how to use their cell phone as a flashlight so they don’t have to ask for help the next time. Likewise, when the metaphorical toddlers who use your database server have issues, they will instinctively know something is wrong, and may even have some idea what caused it, but will have no depth of knowledge to figure out the right solution. That is where the DBA comes in and attempts to save the day. However, when one looks beneath the shiny UI, SQL Server has its own “40 foot display of light bulbs”, in the form of the tremendous number of tools and the often-bewildering amount of information they can present to the DBA, to help us find issues. Unfortunately, resorting to guesswork, to trying different “bulbs” over and over, hoping to stumble on the answer. This is where the right depth of knowledge goes a long way. If we need to write a SELECT statement, then knowing the syntax and where to find the data is not enough. Knowledge of indexes and query plans is essential. Without it, we might hit on a query that “works”, but we are basically still a user, not a programmer, because we have no real control over our platform. Is that level of knowledge deep enough? Probably not, since knowledge of the underlying metadata and structures would be very useful in helping us make sense of any query plan. Understanding the structure of an index makes the “key lookup” operator not sound like what you do when someone tapes your car key to the ceiling. So is even this level of understanding deep enough? Do we need to understand the memory architecture used to process the query? It might be a comforting level of knowledge, and will doubtless come in handy at some point, but is not strictly necessary in most cases. Beyond that lies (more or less) full knowledge of SQL language and the intricacies of every step the SQL Server engine takes to process our query. My personal theory is that, as a professional, our knowledge of a given task should extend, at a minimum, one level deeper than is strictly necessary to perform the task. Anything deeper can be left to the ridiculously smart, or obsessive, or both. As an example. tasked with storing an integer value between 0 and 99999999, it’s essential that I know that choosing an Integer over Decimal(8,0) will likely offer performance benefits. It is then useful that I also understand the value of adding a CHECK constraint, to make sure the values are valid to the desired range; and comforting that I know a little about the underlying processors, registers and computer math. Anything further, I leave to the likes of Joe Chang, whose recent blog post on the topic offers depth by the bucketful!  

    Read the article

  • What's new in Servlet 3.1 ? - Java EE 7 moving forward

    - by arungupta
    Servlet 3.0 was released as part of Java EE 6 and made huge changes focused at ease-of-use. The idea was to leverage the latest language features such as annotations and generics and modernize how Servlets can be written. The web.xml was made as optional as possible. Servet 3.1 (JSR 340), scheduled to be part of Java EE 7, is an incremental release focusing on couple of key features and some clarifications in the specification. The main features of Servlet 3.1 are explained below: Non-blocking I/O - Servlet 3.0 allowed asynchronous request processing but only traditional I/O was permitted. This can restrict scalability of your applications. Non-blocking I/O allow to build scalable applications. TOTD #188 provide more details about how non-blocking I/O can be done using Servlet 3.1. HTTP protocol upgrade mechanism - Section 14.42 in the HTTP 1.1 specification (RFC 2616) defines an upgrade mechanism that allows to transition from HTTP 1.1 to some other, incompatible protocol. The capabilities and nature of the application-layer communication after the protocol change is entirely dependent upon the new protocol chosen. After an upgrade is negotiated between the client and the server, the subsequent requests use the new chosen protocol for message exchanges. A typical example is how WebSocket protocol is upgraded from HTTP as described in Opening Handshake section of RFC 6455. The decision to upgrade is made in Servlet.service method. This is achieved by adding a new method: HttpServletRequest.upgrade and two new interfaces: javax.servlet.http.HttpUpgradeHandler and javax.servlet.http.WebConnection. TyrusHttpUpgradeHandler shows how WebSocket protocol upgrade is done in Tyrus (Reference Implementation for Java API for WebSocket). Security enhancements Applying run-as security roles to #init and #destroy methods Session fixation attack by adding HttpServletRequest.changeSessionId and a new interface HttpSessionIdListener. You can listen for any session id changes using these methods. Default security semantic for non-specified HTTP method in <security-constraint> Clarifying the semantics if a parameter is specified in the URI and payload Miscellaneous ServletResponse.reset clears any data that exists in the buffer as well as the status code, headers. In addition, Servlet 3.1 will also clears the state of calling getServletOutputStream or getWriter. ServletResponse.setCharacterEncoding: Sets the character encoding (MIME charset) of the response being sent to the client, for example, to UTF-8. Relative protocol URL can be specified in HttpServletResponse.sendRedirect. This will allow a URL to be specified without a scheme. That means instead of specifying "http://anotherhost.com/foo/bar.jsp" as a redirect address, "//anotherhost.com/foo/bar.jsp" can be specified. In this case the scheme of the corresponding request will be used. Clarification in HttpServletRequest.getPart and .getParts without multipart configuration. Clarification that ServletContainerInitializer is independent of metadata-complete and is instantiated per web application. A complete replay of What's New in Servlet 3.1: An Overview from JavaOne 2012 can be seen here (click on CON6793_mp4_6793_001 in Media). Each feature will be added to the JSR subject to EG approval. You can share your feedback to [email protected]. Here are some more references for you: Servlet 3.1 Public Review Candidate Downloads Servlet 3.1 PR Candidate Spec Servlet 3.1 PR Candidate Javadocs Servlet Specification Project JSR Expert Group Discussion Archive Java EE 7 Specification Status Several features have already been integrated in GlassFish 4 Promoted Builds. Have you tried any of them ? Here are some other Java EE 7 primers published so far: Concurrency Utilities for Java EE (JSR 236) Collaborative Whiteboard using WebSocket in GlassFish 4 (TOTD #189) Non-blocking I/O using Servlet 3.1 (TOTD #188) What's New in EJB 3.2 ? JPA 2.1 Schema Generation (TOTD #187) WebSocket Applications using Java (JSR 356) Jersey 2 in GlassFish 4 (TOTD #182) WebSocket and Java EE 7 (TOTD #181) Java API for JSON Processing (JSR 353) JMS 2.0 Early Draft (JSR 343) And of course, more on their way! Do you want to see any particular one first ?

    Read the article

  • How to make a stack stable? Need help for an explicit resting contact scheme (2-dimensional)

    - by Register Sole
    Previously, I struggle with the sequential impulse-based method I developed. Thanks to jedediah referring me to this paper, I managed to rebuild the codes and implement the simultaneous impulse based method with Projected-Gauss-Seidel (PGS) iterative solver as described by Erin Catto (mentioned in the reference of the paper as [Catt05]). So here's how it currently is: The simulation handles 2-dimensional rotating convex polygons. Detection is using separating-axis test, with a SKIN, meaning closest points between two polygons is detected and determined if their distance is less than SKIN. To resolve collision, simultaneous impulse-based method is used. It is solved using iterative solver (PGS-solver) as in Erin Catto's paper. Error-correction is implemented using Baumgarte's stabilization (you can refer to either paper for this) using J V = beta/dt*overlap, J is the Jacobian for the constraints, V the matrix containing the velocities of the bodies, beta an error-correction parameter that is better be < 1, dt the time-step taken by the engine, and overlap, the overlap between the bodies (true overlap, so SKIN is ignored). However, it is still less stable than I expected :s I tried to stack hexagons (or squares, doesn't really matter), and even with only 4 to 5 of them, they would swing! Also note that I am not looking for a sleeping scheme. But I would settle if you have any explicit scheme to handle resting contacts. That said, I would be more than happy if you have a way of treating it generally (as continuous collision, instead of explicitly as a special state). Ideas I have tried: Using simultaneous position based error correction as described in the paper in section 5.3.2, turned out to be worse than the current scheme. If you want to know the parameters I used: Hexagons, side 50 (pixels) gravity 2400 (pixels/sec^2) time-step 1/60 (sec) beta 0.1 restitution 0 to 0.2 coeff. of friction 0.2 PGS iteration 10 initial separation 10 (pixels) mass 1 (unit is irrelevant for now, i modified velocity directly<-impulse method) inertia 1/1000 Thanks in advance! I really appreciate any help from you guys!! :) EDIT In response to Cholesky's comment about warm starting the solver and Baumgarte: Oh right, I forgot to mention! I do save the contact history and the impulse determined in this time step to be used as initial guess in the next time step. As for the Baumgarte, here's what actually happens in the code. Collision is detected when the bodies' closest distance is less than SKIN, meaning they are actually still separated. If at this moment, I used the PGS solver without Baumgarte, restitution of 0 alone would be able to stop the bodies, separated by a distance of ~SKIN, in mid-air! So this isn't right, I want to have the bodies touching each other. So I turn on the Baumgarte, where its role is actually to pull the bodies together! Weird I know, a scheme intended to push the body apart becomes useful for the reverse. Also, I found that if I increase the number of iteration to 100, stacks become much more stable, though the program becomes so slow. UPDATE Since the stack swings left and right, could it be something is wrong with my friction model? Current friction constraint: relative_tangential_velocity = 0

    Read the article

  • Android layout issue - relative widths in percent using weight

    - by cdonner
    I am trying to assign relative widths to columns in a ListView that is in a TabHost, using layout_weight as suggested here: <?xml version="1.0" encoding="utf-8"?> <TabHost xmlns:android="http://schemas.android.com/apk/res/android" android:id="@android:id/tabhost" android:layout_width="fill_parent" android:layout_height="fill_parent"> <LinearLayout android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent"> <TabWidget android:id="@android:id/tabs" android:layout_width="fill_parent" android:layout_height="wrap_content"/> <FrameLayout android:id="@android:id/tabcontent" android:layout_width="fill_parent" android:layout_height="fill_parent"> <TableLayout android:id="@+id/triplist" android:layout_width="fill_parent" android:layout_height="wrap_content" android:paddingTop="4px"> <TableRow> <ListView android:id="@+id/triplistview" android:layout_width="fill_parent" android:layout_height="wrap_content"/> </TableRow> <TableRow> <Button android:id="@+id/newtripbutton" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Add Trip"/> </TableRow> [other tabs ...] My row definition has 4 columns that I would like to size as follows: <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="wrap_content" android:orientation="horizontal" android:weightSum="1.0" android:padding="4px"> <TextView android:id="@+id/rowtripdate" android:layout_weight=".2" android:layout_width="0dip" android:layout_height="wrap_content" android:inputType="date"/> <TextView android:id="@+id/rowodostart" android:layout_weight=".2" android:layout_width="0dip" android:layout_height="wrap_content"/> <TextView android:id="@+id/rowodoend" android:layout_weight=".2" android:layout_width="0dip" android:layout_height="wrap_content"/> <TextView android:id="@+id/rowcomment" android:layout_weight=".4" android:layout_width="0dip" android:layout_height="wrap_content"> Unfortunately, it seems to want to fit all the columns into the space that the button occupies, as opposed to the width of the screen. Or maybe there is another constraint that I do not understand. I'd appreciate your help.

    Read the article

  • Asp.net MVC Route class that supports catch-all parameter anywhere in the URL

    - by Robert Koritnik
    the more I think about it the more I believe it's possible to write a custom route that would consume these URL definitions: {var1}/{var2}/{var3} Const/{var1}/{var2} Const1/{var1}/Const2/{var2} {var1}/{var2}/Const as well as having at most one greedy parameter on any position within any of the upper URLs like {*var1}/{var2}/{var3} {var1}/{*var2}/{var3} {var1}/{var2}/{*var3} There is one important constraint. Routes with greedy segment can't have any optional parts. All of them are mandatory. Example This is an exemplary request http://localhost/Show/Topic/SubTopic/SubSubTopic/123/This-is-an-example This is URL route definition {action}/{*topicTree}/{id}/{title} Algorithm Parsing request route inside GetRouteData() should work like this: Split request into segments: Show Topic SubTopic SubSubTopic 123 This-is-an-example Process route URL definition starting from the left and assigning single segment values to parameters (or matching request segment values to static route constant segments). When route segment is defined as greedy, reverse parsing and go to the last segment. Parse route segments one by one backwards (assigning them request values) until you get to the greedy catch-all one again. When you reach the greedy one again, join all remaining request segments (in original order) and assign them to the greedy catch-all route parameter. Questions As far as I can think of this, it could work. But I would like to know: Has anyone already written this so I don't have to (because there are other aspects to parsing as well that I didn't mention (constraints, defaults etc.) Do you see any flaws in this algorithm, because I'm going to have to write it myself if noone has done it so far. I haven't thought about GetVirtuaPath() method at all.

    Read the article

  • How to prevent duplicate records being inserted with SqlBulkCopy when there is no primary key

    - by kscott
    I receive a daily XML file that contains thousands of records, each being a business transaction that I need to store in an internal database for use in reporting and billing. I was under the impression that each day's file contained only unique records, but have discovered that my definition of unique is not exactly the same as the provider's. The current application that imports this data is a C#.Net 3.5 console application, it does so using SqlBulkCopy into a MS SQL Server 2008 database table where the columns exactly match the structure of the XML records. Each record has just over 100 fields, and there is no natural key in the data, or rather the fields I can come up with making sense as a composite key end up also having to allow nulls. Currently the table has several indexes, but no primary key. Basically the entire row needs to be unique. If one field is different, it is valid enough to be inserted. I looked at creating an MD5 hash of the entire row, inserting that into the database and using a constraint to prevent SqlBulkCopy from inserting the row,but I don't see how to get the MD5 Hash into the BulkCopy operation and I'm not sure if the whole operation would fail and roll back if any one record failed, or if it would continue. The file contains a very large number of records, going row by row in the XML, querying the database for a record that matches all fields, and then deciding to insert is really the only way I can see being able to do this. I was just hoping not to have to rewrite the application entirely, and the bulk copy operation is so much faster. Does anyone know of a way to use SqlBulkCopy while preventing duplicate rows, without a primary key? Or any suggestion for a different way to do this?

    Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >