Search Results

Search found 9285 results on 372 pages for 'disk imaging'.

Page 35/372 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

• Linux cannot alter partition table of main hard disk of my laptop

  - by djechelon

  I run openSUSE 12.2 on my ASUS N76VZ laptop. My problem is that I cannot alter the partition table of first hard disk /dev/sda1. YaST partitioner says it's unreadable, but actually it can read it but not alter it. It doesn't tell me anything else, except that I can wipe the partition table (having to reinstall Windows for the third time). Since I want to create new partitions on that disk, how do I fix the partition table layout? I could create new partition from Windows Computer Management and format them in Linux. I could do this, but it doesn't explain the problem

  Read the article

• Can I recover files on a disk With 5% of start of disk completely wiped (overwritten with 1s)

  - by ARA

  Recently a virus attacked my pc and cleared 5% of my hard disk which has one partition I viewed the disk in a hex viewer program like active undelete ,cleared the virus data and overwrote it with 1s I want to recover a large file that is about 10gb, but no recovery tools seem to be able to recover any files. I want to know ,in theory, is this file recoverable ? I think that files are fragmented, researched about NTFS File System and i understand cluster information are just saved in MFT File ? Is there any way to recover file without a MFT structure ?

  Read the article

• Detach Disk from deleted virtual machine

  - by user1628043

  I had an Virtual Machine running in Azure for a couple of weeks and suddenly it stopped responding. I shut it down and tried to restart it but that failed saying the VM faulted. I then deleted the VM which leaves the VHD file intact on my storage account. I was intending to try recreating a new VM using thie VHD from the first VM however, the OS disk and Data disk are both still marked as being attached to the original VM which no longer exists. Is there any way to detach these disks so I can use them to create a new VM?

  Read the article

• scsi and ata entries for same hard drive under /dev/disk/by-id

  - by John Dibling

  I am trying to set up a ZFS pool using 4 bare drives which I have attached to my Ubuntu system via a SATA hot swap backplane. These are Hitachi SATA drives. When I list the contents of /dev/disk/by-id, I see two entries for each drive: root@scorpius:/dev/disk/by-id# ls | grep Hitachi ata-Hitachi_HDS5C3030ALA630_MJ1323YNG0ZJ7C ata-Hitachi_HDS5C3030ALA630_MJ1323YNG1064C ata-Hitachi_HDS5C3030ALA630_MJ1323YNG190AC ata-Hitachi_HDS5C3030ALA630_MJ1323YNG1DGPC scsi-SATA_Hitachi_HDS5C30_MJ1323YNG0ZJ7C scsi-SATA_Hitachi_HDS5C30_MJ1323YNG1064C scsi-SATA_Hitachi_HDS5C30_MJ1323YNG190AC scsi-SATA_Hitachi_HDS5C30_MJ1323YNG1DGPC I know these are the same drives because I wrote down the serial numbers, and all the other drives in this system are either Seagate or WD. The serial number for the first one, for example, is YNG0ZJ7C. Why are there two entries here for each drive? More to the point, when I create my ZFS pool which one should I use; the scsi- one or the ata- one?

  Read the article

• df -h overreports disk space on VPS

  - by Rincewind42

  When I run the command df -h on my new Ubuntu linux vServer I get the following: # df -h Filesystem Size Used Avail Use% Mounted on /dev/hdv1 466G 33G 434G 7% / none 16M 0 16M 0% /tmp Running du -sh gives # du -sh du: cannot access `./proc/13624/task/13624/fd/4': No such file or directory du: cannot access `./proc/13624/task/13624/fdinfo/4': No such file or directory du: cannot access `./proc/13624/fd/4': No such file or directory du: cannot access `./proc/13624/fdinfo/4': No such file or directory 952M . The VPS should only have 5Gb of disk space but df reports 466Gb. How can I view the correct amount of disk space?

  Read the article

• External disk not working with Mac OS X 10.5

  - by ctx2002

  Hi: My OS is 10.5.7. I have an external hard disk, formatted as Mac OS Extended (Journaled), connected to my Mac machine through USB cable. I have used it for a while, but now it is not working. Error showed in /var/log/system.log. USBF: 2521.384 AppleUSBEHCI[0xa515800]::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 0, EP: 0) ..... ...... kernel[0]: USBF: 2588.616 [0xa6baa00] The IOUSBFamily was not able to enumerate a device. Luckily, in my work place there is a Mac with OS 10.4, so I had plugged the disk into the 10.4 machine and it worked!!! I did checked "System Profiler" on both machines (10.5, 10.4). Under usb section, for 10.5 it shows USBEHCI, under 10.4, it shows USBOHCI. I am not a expert on USB Device , can any one tell me why 10.5 cause the problem. it was worked under 10.5

  Read the article

• Recovering data from a corrupted disk

  - by r_honey

  I use an external harddisk to backup my data (it had 3 partitions). Last week when I plugged it in, the OS (Win 7) hung up and I had to force re-boot the machine. When I turned it back on, the system just did not detect the hard-disk. It was last Sunday and I had to give up after sometime. Now I return back next Sunday (today) and when I plug it back-in to the machine, the OS detects the disk as well as all the 3 partitions on it. But it says all 3 are unformatted and I cant access any of them. Is there any way to recover data from the 3 partitions (I tried PC File Recovery and Recuva from PiriForm but neither detected these partitions).

  Read the article

• Use `dd` linux program to save / recover a disk's MBR

  - by Graduate

  I have an Ubuntu OS installed on my laptop. I want to install Windows 7 as well to another disk partition (I will do it by recovering it from a special partition on my laptop). After installing Windows, I want to recover my hard drive MBR to be able to load Ubuntu. I have a plan to use linux dd program: 1) (Before installing, perform this command in Linux) dd if=/dev/sda of=/home/user/mbr_backup bs=512 count=1 2) (after installing, load Ubuntu Live CD and launch this) dd if=/home/user/mbr_backup of=/dev/sda bs=512 count=1 3) Load Ubuntu on PC and re-configure the GRUB2 to be able start Windows I need your advice, I want to be sure I won't damage the disk (it's partition table).

  Read the article

• how to recover data from my disk - I accidentally copied with dd an iso on it

  - by sijoune

  I wanted to create a bootable usb from an iso image and i accidentally put as the output of the dd, instead of my usb drive, one of my hard disks. The iso was 3,3 GB and my disk is 1TB! And it was almost full. Can i at least restore the data that has not been overwritten? Right now i can't even mount it. I get this error: Error mounting /dev/sdd1 at /media/main/UDF Volume: Command-line `mount -t "udf" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,iocharset=utf8,umask=0077" "/dev/sdd1" "/media/main/UDF Volume"' exited with non-zero exit status 32: mount: wrong fs type, bad option, bad superblock on /dev/sdd1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Also since i know which filesystem my disk used if i reformat it to this filesystem is there any chance i can mount it and retrieve the rest of the files?

  Read the article

• Monitoring disk block access in Linux

  - by VoidPointer

  Is there a way to gather statistics about blocks being accessed on a disk? I have a scenario where a task is both memory and I/O intensive and I need to find a good balance as to how much of the available RAM I can assign to the process and how much I should leave for the system for building its I/O cache for the block device being used. I suspect that most of the I/O that is currently happening is accessing a rather small subset of the device and that performance could be optimized by increasing the RAM that is available for I/O buffering. Ideally, I would be able to create something like a "heat-map" that shows me which parts of the disk are accessed most of the time.

  Read the article

• repairing or retrieving video off a cracked disk

  - by Tori Hisey

  My disk has a thin cracked right through the one side. right around the crack it looks like it has water damage but im pretty sure it was caused from the crack. will tape work for this? its a dvd of us in jamaica swimming with dolphins and i havent even watched it yet, it got ruined in my suitcase. If there is no way to repair it, is there somewhere that i can take it so they might be able to somehow get the video off of it and onto another disk? any suggestions would be helpful. Thanks

  Read the article

• Why is LSHW Only listing one of my two HDDs?

  - by Mark

  I have a 120GB HDD and a 1TB HDD in the system. I installed Ubuntu Server using LVM on the 120GB. After installation I added the 1TB to the existing volume group and added 10GB to /home as a test. My understanding is that lshw is supposed to list hardware. What's the difference here? mark@server:~$ sudo lshw -short -c disk H/W path Device Class Description ========================================================= /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/1/0.0.0 /dev/sdc disk SCSI Disk /0/1/0.0.1 /dev/sdd disk SCSI Disk /0/1/0.0.2 /dev/sde disk SCSI Disk /0/1/0.0.3 /dev/sdf disk SCSI Disk The 1TB only shows up as a volume, not as a disk. mark@server:~$ sudo lshw -short .... /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/0/1 /dev/sda1 volume 476MiB Linux filesystem partition /0/100/1f.2/0/2 /dev/sda2 volume 111GiB Linux LVM Physical Volume partition /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/100/1f.2/0.0.0 /dev/sdb volume 931GiB WDC WD1001FALS-0 Thanks, Mark

  Read the article

• How to Change and Manually Start and Stop Automatic Maintenance in Windows 8

  - by Lori Kaufman

  Windows 8 has a new feature that allows you to automatically run scheduled daily maintenance on your computer. These maintenance tasks run in the background and include security updating and scanning, Windows software updates, disk defragmentation, system diagnostics, among other tasks. We’ve previously shown you how to automate maintenance in Windows 7, Vista, and XP. Windows 8 maintenance is automatic by default and the performance and energy efficiency has been improved over Windows 7. The program for Windows 8 automatic maintenance is called MSchedExe.exe and it is located in the C:\Windows\System32 directory. We will show you how you can change the automatic maintenance settings in Windows 8 and how you can start and stop the maintenance manually. NOTE: It seems that you cannot turn off the automatic maintenance in Windows 8. You can only change the settings and start and stop it manually. Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked

  Read the article

• Why is the hard drive still full after deleting some files?

  - by julio

  I have a server running Ubuntu Server 12.xx. Today some services stopped and I found some messages about full disk, so I ran df -h: Filesystem Size Used Disp Use% /dev/mapper/ubuntu-root 455G 434G 0 100% / udev 1,7G 4,0K 1,7G 1% /dev tmpfs 689M 4,2M 685M 1% /run none 5,0M 0 5,0M 0% /run/lock none 1,7G 0 1,7G 0% /run/shm /dev/sda1 228M 51M 166M 24% /boot overflow 1,0M 0 1,0M 0% /tmp I tried to delete some files remotely from a Windows computer by right-clicking and choosing "delete", but the hard drive remained full. Is there a Trash folder in Ubuntu Server? What could be happening?

  Read the article

• Claiming the provisioned storage

  - by gita

  I created a ubuntu server vm with 64GB provisioned storage. I remember that I specified 30GB to be used for the vm. When I do df -h, I get Filesystem Size Used Avail Use% Mounted on /dev/mapper/analysis--db-root<br/> 28G 25G 904M 97% / udev 2.0G 4.0K 2.0G 1% /dev tmpfs 793M 228K 793M 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.0G 0 2.0G 0% /run/shm /dev/sda1 228M 45M 171M 21% /boot The disk is almost full, how can I use my other 30GB from the provisioned storage?

  Read the article

• AHCI Hotswap in Lucid Server

  - by chong

  Does Lucid support hotswapping of AHCI devices? Is there anything more to it than simply unmounting all filesystems on the drive to be disconnected and plugging in the new disk? 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02) is the controller I'm working with. BIOS is set to AHCI. I also tried simply unmounting and unplugging. That seemed to work fine. Plugging in a new drive locked up the system. AHCI kernel module is also loaded. I've also looked at the Raid WIKI on kernel.org which talks about hardware requirements for AHCI HotSwapping of disks. My drives and cables all appear to meet the criteria, but most of that info pertains to the electrical side (grounding, etc...).

  Read the article

• Remove encryption from USB flash drive

  - by Timic

  It all started when I was attempting to format my PNY USB drive because it was full of junk. When it asked me what type of file system, I selected FAT but there was a checkbox below that said "Encrypt" and I accidently checked it and continue. I had no choice but to come up with a passphrase for it, and so I did, thinking I was able to remove that encryption. But after that at Disk Utility I thought I would find a "Remove Encryption" button or something like that but I didn't. I tried formatting it to remove the encryption but it gives me an error: Error Formatting, The device is busy" Detail>>> One or more block devices are holding /dev/sdb/. I am stuck, what should I do?

  Read the article

• No inodes left error, df -i command says contrary

  - by abhinavkulkarni

  I copied a lot of files in my mounted Windows drive from Ubuntu and I subsequently ran into Error opening file '/media/windows/<some-file-path>': No space left on device error. I checked the output of df -i command to see if I had ran out of inodes for the mounted Windows drive: Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda5 2363904 504119 1859785 22% / udev 207621 522 207099 1% /dev tmpfs 211487 450 211037 1% /run none 211487 3 211484 1% /run/lock none 211487 7 211480 1% /run/shm none 211487 19 211468 1% /run/user /dev/sda2 458686680 2588876 456097804 1% /media/windows As above output shows, lots of inodes are available for /media/windows drive. I have plenty of disk space left - around 500GB. What's the problem then?

  Read the article

• How often should saving to disk occur in an automatically saving text editor?

  - by lelandmiller

  I am developing a simple text editor and would like the application to save the text automatically. In other words, the user would never have to press a save button. I have seen other applications that do this, and was wondering how often is it safe to write files to disk? From a user experience standpoint, it seems that the more frequently this happens the better, but I am worried about performance and possible disk wear (especially on writes to SSDs). It seems like the operating system disk caching might help avoid these problems, but I also don't know if its safe to rely on that for an application like this. I was planning on writing the whole document to disk at each save, but this just seems terribly inefficient if the OS ends up writing it to disk to frequently, but relying on program unload may lose data in the case of a crash. Does anyone have any experience dealing with this that might be able to help?

  Read the article

• Deleted files not increasing available free space on Ubuntu (as reported by df -h)

  - by Homunculus Reticulli

  I am writing data munging scripts (python and bash), to munge data and import large quantities of text files into a database. I am currently in the test phase, so I am generating several K's of files and deleting them (the files consume about 20G of space). After a test run, I delete the files (sometimes without having imported into the database). I notice that there is a steady decrease in the amount of free space on my disk (as reported by df -h). I don't understand this, as I use rm * (in the data directory), and in the cases where I use Nautilus, I empty the Trash bin as well. Similarly, I notice that when I import the data into the (postgresql) database, and then delete the data from the tables using DELETE FROM tablename;, the size consumed in the postgresql data directory does not go down either. Currently, I have lost approximately 200G from hard drive, and I need to reclaim that - but don't know what to do to reclaim it - any ideas?. I am running Ubuntu 10.0.4 LTS + postgresql 8.4

  Read the article

• How can I use Ubuntu to rescue files from an NTFS drive?

  - by dago

  I reinstalled windows on the laptop of my daughter. Before doing this we made a copy of her music, pictures and so on. Unfortunately, the folder we created for the backup was empty (I checked after I reinstalled windows). Today a miracle happened, as suddenly the data were back but when Itried to copy them to another place thez disappeared again. Checking the drive with disk utility I got the message "filesystem is not clean". Is there a way to recover the data? Preferred solution would be a tool with a gui. The drive I need to repair is formatted in NTFS and is connected via usb to laptop.

  Read the article

• Installed 11.10 on shared drive, when other partition mounted, HDD shown full

  - by Thebetpet

  I just partitioned a 500GB HDD 50%-50%. I installed ubuntu 11.10 on one half and copied a load of files onto the other. When I don't mount the other partition, it shows I have used 12.1GB and have about 240GB free. The second I mount the other partition, I can't copy any files over and get a disk full message. There is about 10-20GB Free on the other partition. Am I doing something wrong or is this a bug?

  Read the article

• ImgBurn fails to burn data CD-R disk due to "Layouts do not match" error

  - by 0xAether

  I have a reoccurring problem with the program ImgBurn. Whenever I try and burn anything to a CD-R using ImgBurn it burns just fine, except for when I go and verify the disk. It tells me that the "Layouts do not match". Windows 7 shows the disk as completely blank. Although, I see on the bottom of the disk it has been written to. I can burn ISO files to DVD-R's just fine. This only seems to happen with CD-R's. The CD-R's I'm using are Memorex Cool Colors 52x CD-R's. I have looked on Google, and it seems like I'm not the only one this happens to. Unfortunately, no one is able to provide an explanation. I have included the log file from the last CD I just burnt. If you need anything else to better diagnose this problem, I will gladly provide it. ; //****************************************\\ ; ImgBurn Version 2.5.7.0 - Log ; Monday, 19 November 2012, 16:11:57 ; \\****************************************// ; ; I 16:04:55 ImgBurn Version 2.5.7.0 started! I 16:04:55 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 16:04:55 Total Physical Memory: 4,156,380 KB - Available: 3,317,144 KB I 16:04:55 Initialising SPTI... I 16:04:55 Searching for SCSI / ATAPI devices... I 16:04:56 -> Drive 1 - Info: Optiarc DVD RW AD-7560S SH03 (D:) (SATA) I 16:04:56 Found 1 DVD±RW/RAM! I 16:05:37 Operation Started! I 16:05:37 Source File: C:\Users\Aaron\Desktop\VMware Workstation 9.iso I 16:05:37 Source File Sectors: 223,057 (MODE1/2048) I 16:05:37 Source File Size: 456,820,736 bytes I 16:05:37 Source File Volume Identifier: VMwareWorksta9 I 16:05:37 Source File Volume Set Identifier: 20121119_2102 I 16:05:37 Source File File System(s): ISO9660, Joliet I 16:05:37 Destination Device: [1:0:0] Optiarc DVD RW AD-7560S SH03 (D:) (SATA) I 16:05:37 Destination Media Type: CD-R (Disc ID: 97m17s06f, Moser Baer India) I 16:05:37 Destination Media Supported Write Speeds: 10x, 16x, 20x, 24x I 16:05:37 Destination Media Sectors: 359,847 I 16:05:37 Write Mode: CD I 16:05:37 Write Type: SAO I 16:05:37 Write Speed: 6x I 16:05:37 Lock Volume: Yes I 16:05:37 Test Mode: No I 16:05:37 OPC: No I 16:05:37 BURN-Proof: Enabled W 16:05:37 Write Speed Miscompare! - MODE SENSE: 1,764 KB/s (10x), GET PERFORMANCE: 11,080 KB/s (63x) W 16:05:37 Write Speed Miscompare! - MODE SENSE: 1,764 KB/s (10x), GET PERFORMANCE: 11,080 KB/s (63x) W 16:05:37 Write Speed Miscompare! - MODE SENSE: 1,764 KB/s (10x), GET PERFORMANCE: 11,080 KB/s (63x) W 16:05:37 Write Speed Miscompare! - MODE SENSE: 1,764 KB/s (10x), GET PERFORMANCE: 11,080 KB/s (63x) W 16:05:37 Write Speed Miscompare! - MODE SENSE: 1,764 KB/s (10x), GET PERFORMANCE: 11,080 KB/s (63x) W 16:05:37 Write Speed Miscompare! - Wanted: 1,058 KB/s (6x), Got: 1,764 KB/s (10x) / 11,080 KB/s (63x) W 16:05:37 The drive only supports writing these discs at 10x, 16x, 20x, 24x. I 16:05:38 Filling Buffer... (80 MB) I 16:05:40 Writing LeadIn... I 16:06:07 Writing Session 1 of 1... (1 Track, LBA: 0 - 223056) I 16:06:07 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 223056) I 16:11:00 Synchronising Cache... I 16:11:18 Exporting Graph Data... I 16:11:18 Graph Data File: C:\Users\Aaron\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7560S_SH03_MONDAY-NOVEMBER-19-2012_4-05_PM_97m17s06f_6x.ibg I 16:11:18 Export Successfully Completed! I 16:11:18 Operation Successfully Completed! - Duration: 00:05:41 I 16:11:18 Average Write Rate: 1,522 KB/s (10.1x) - Maximum Write Rate: 1,544 KB/s (10.3x) I 16:11:18 Cycling Tray before Verify... W 16:11:23 Waiting for device to become ready... I 16:11:47 Device Ready! E 16:11:47 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0) E 16:11:47 Verify Failed! - Reason: Layouts do not match. I 16:11:57 Close Request Acknowledged I 16:11:57 Closing Down... I 16:11:57 Shutting down SPTI... I 16:11:57 ImgBurn closed!

  Read the article

• Slow disk transfer rate

  - by Nooklez

  I have problem with slow disk transfer rate. It's static files server for our website. I was making backup of data and noticed that tar is very slow. So I did hdparm -t and... hdparm -t /dev/sda3 /dev/sda3: Timing buffered disk reads: 6 MB in 4.70 seconds = 1.28 MB/sec It's low traffic hour now on our site, so huge I/O traffic is not a reason (iotop show less than 1 MB/s). It's RAID10 setup (2x2 SATA drives). Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy ------------------------------------------------------------------------------ u0 RAID-10 OK - - 64K 1396.96 W ON VPort Status Unit Size Type Phy Encl-Slot Model ------------------------------------------------------------------------------ p0 OK u0 698.63 GB SATA 0 - WDC WD7500AADS-00M2 p1 OK u0 698.63 GB SATA 1 - WDC WD7500AADS-00M2 p2 OK u0 698.63 GB SATA 2 - WDC WD7500AADS-00M2 p3 OK u0 698.63 GB SATA 3 - WDC WD7500AADS-00M2 We have recently changed almost all components of server (excluding 3ware controller + disks). And I think problems started since then. Can it be configuration problem or hardware? EDIT: I found something like that in dmesg [166843.625843] irq 16: nobody cared (try booting with the "irqpoll" option) [166843.625846] Pid: 0, comm: swapper Not tainted 3.1.5-gentoo #3 [166843.625847] Call Trace: [166843.625848] <IRQ> [<ffffffff810859d5>] __report_bad_irq+0x35/0xc1 [166843.625856] [<ffffffff81085cec>] note_interrupt+0x165/0x1e1 [166843.625859] [<ffffffff8108445f>] handle_irq_event_percpu+0x16f/0x187 [166843.625861] [<ffffffff810844a9>] handle_irq_event+0x32/0x51 [166843.625863] [<ffffffff8108640b>] handle_fasteoi_irq+0x75/0x99 [166843.625866] [<ffffffff810039d7>] handle_irq+0x83/0x8b [166843.625868] [<ffffffff810036ad>] do_IRQ+0x48/0xa0 [166843.625871] [<ffffffff8155082b>] common_interrupt+0x6b/0x6b [166843.625872] <EOI> [<ffffffff812981e8>] ? acpi_safe_halt+0x22/0x35 [166843.625877] [<ffffffff812981e2>] ? acpi_safe_halt+0x1c/0x35 [166843.625879] [<ffffffff81298216>] acpi_idle_do_entry+0x1b/0x2b [166843.625881] [<ffffffff81298276>] acpi_idle_enter_c1+0x50/0x99 [166843.625884] [<ffffffff813b792a>] cpuidle_idle_call+0xed/0x171 [166843.625886] [<ffffffff81001257>] cpu_idle+0x55/0x81 [166843.625888] [<ffffffff81532a69>] rest_init+0x6d/0x6f [166843.625891] [<ffffffff81aa1aca>] start_kernel+0x329/0x334 [166843.625893] [<ffffffff81aa12a6>] x86_64_start_reservations+0xb6/0xba [166843.625894] [<ffffffff81aa139c>] x86_64_start_kernel+0xf2/0xf9 [166843.625896] handlers: [166843.625898] [<ffffffff812dc8de>] twl_interrupt [166843.625900] Disabling IRQ #16 It's related to problem? EDIT #2: Based on feedback in comments, here is more informations. cat /proc/interrupts 16: 390813 0 0 0 IO-APIC-fasteoi 3w-sas Controller model: [ 1.095350] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 1.095467] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 1.095641] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 1.095787] 3w-sas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.095881] 3w-sas 0000:01:00.0: setting latency timer to 64 [ 1.910801] 3w-sas: scsi0: Found an LSI 3ware 9750-4i Controller at 0xfe560000, IRQ: 16. [ 2.216537] 3w-sas: scsi0: Firmware FH9X 5.08.00.008, BIOS BE9X 5.07.00.011, Phys: 8. [ 2.216836] scsi 0:0:0:0: Direct-Access LSI 9750-4i DISK 5.08 PQ: 0 ANSI: 5 And motherboard: description: Motherboard product: P8H67-M vendor: ASUSTeK Computer INC.

  Read the article

• Vista 64-bit, DISK BOOT FAILURE

  - by weka

  So I have this Acer Aspire AX3200-U3600A with Windows Vista (64-bit). Every night I turn it off and turn it back on in the morning. Around three weeks ago, I did a fresh factory reimage. Good as new. Then around two days ago, when I turned it on, I noticed it was running extremly slow. As in, it would often freeze up while I had multiple applications open when it usually never froze up. So I decided to restart my computer. Big mistake. My computer froze right after I clicked shut-down. I waited a while. Nothing. Waited some minutes. Nope. I decided to shut it down by pressing the power button. Here is where the problems begin. When I turned it back on, I saw the Windows logo and loading bar and then it loaded to black. I turned it off again forcefully by power button and then once more... then I got: AMD Data Change... Update New Data to DMI! then later the screen clears and I get: AHCI Option ROM BIOS Revision: 01.05.92 Date: 02-19-2008 Copyright (c) 2006-2008 Phoenix Technologies, LTD Port 01: Reset Port Error!! Port 02: then the screen clears again but this time, this loads from the bottom: Nvidia Boot Agent 249.0542 (copyright stuff... blah blah) PXE-E61: Media test failure, check cable. PXE-M0F: Exiting Nvidia Boot Agent DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. So I try to go into Safe Mode. Well, first of all it doesn't load as fast. After it loads disk.sys from windows/drivers, it will wait a while (2-3 mins) THEN load. However it loads the Acer eRecovery Management Tool. I have three options: Reset computer to factory default, Restore computer from user's backup, or Exit. However, the top two options are gray and disabled where as the Exit is in blue and definitely clickable. So obviously safe mode is not there... A strong thing to note: In the beginning when all of this started, I did a Boot Windows Normal from pressing f8 and I got to my desktop! It logged me in. I could see the icons on my files. However my desktop was extremely slow as in when I clicked on the Start menu, it would wait a while, then load up the menu with JUST the gradient, no text or icons... so as you can see... it saw my HDD? Also, before anyone says, I have NO USB plugged in. My mouse and keyboard are not USB inputs, I assure you. And this came without a recovery CD AND when I went in BIOS, to change the BOOT ORDER, I did NOT see a CD-ROM option. And when I tried pressing ALT+F10 to get into Acer eRecovery Management, the top two options were disabled as well. But sometimes on start-up, I get: Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removeable storage is properly connected and then restart your computer. If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occured. Then I tried Last Known Good Configuration Settings, that gives me a BSOD. What should I do/

  Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >