Search Results

Search found 8876 results on 356 pages for 'hardware raid'.

Page 35/356 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

• How do I troubleshoot hardware issues related to a computer freeze/crash?

  - by KronoS

  What are some common guidelines and issues related to hardware being the issue of a computer crash? What should I look for and how do I troubleshoot these problems? What are some tools that are useful in diagnosing these hardware related crashes? I am looking to be able to isolate the problematic device with specific tools and guidelines. For example if device X is causing system failure how do I go about diagnosing it?

  Read the article

• Does the Acer Ferrari One support hardware assisted virtualization?

  - by cmeerw

  Does anyone know if the Acer Ferrari One supports hardware assisted virtualization (it should easy to find out by running Microsoft's Hardware-Assisted Virtualization Detection Tool on that machine). There is lot's of speculation around the web, but I haven't found a definitive answer yet (and would like to confirm that this feature will be working before buying one).

  Read the article

• When Do OS Questions Belong on Hardware Service Requests?

  - by Get Proactive Customer Adoption Team

  Untitled Document My Oracle Support—Logging an Operating System Service Request One of the concerns we hear from our customers with Premier Support for Systems is that they have difficulty logging a Service Request (SR) for an operating system issue. Because Premier Support for Systems includes support for the hardware and the associated operating system, you log any operating system issues through a hardware Service Request. To create a hardware Service Request, you enter the information into the Hardware tab of the Create Service Request screen, but to ensure that the hardware Service Request you enter is recognized and routed appropriately for an operating system issue, you need to change the product from your specific hardware to the operating system that the hardware is running. The example below shows you how to create a Service Request for the operating system when the support level is Premier Support for Systems. The key to success is remembering that the operating system coverage is part of the hardware support. To begin, from anywhere within My Oracle Support, click on the Create SR button as you would to log any SR: Enter your Problem Summary and the Problem Description Next, click on the Hardware tab. Enter the System Serial Number (in this case “12345”) and click on Validate Serial Number: Notice that the product name for the hardware indicates “Sunfire T2000 Server” with an option for a drop down List of Values. Click on the product drop down and choose the correct operating system from the list. In this case I have chosen “OpenSolaris Operating System” Next, you will need to enter the correct operating system version: At this point, you may proceed to complete and submit the Service Request. If your company has Premier Support for Systems, just remember that your operating system has coverage under the hardware it runs on, so start with a Hardware tab on the Service Request screen and change the product related information to reflect the operating system you need help with. Following these simple steps will ensure that the system assigns your Service Request to the right support team for an operating system issue and the support engineer can quickly begin working your issue.

  Read the article

• mount another drive to the same directory

  - by Ken Autotron

  I recently purchased a server that was advertised as 2TB (2 1TB drives) in size, when I use it it reports only one of the drives, I would like to be able to use both as if one drive. here is the specs... sudo lshw -C disk *-disk description: ATA Disk product: TOSHIBA DT01ACA1 vendor: Toshiba physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/sda version: MS2O serial: 13EJ81XPS size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=0005b3dd *-disk description: ATA Disk product: TOSHIBA DT01ACA1 vendor: Toshiba physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/sdb version: MS2O serial: 13OX3TKPS size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00030e86 and fdisk -l Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00030e86 Device Boot Start End Blocks Id System /dev/sdb1 * 4096 41947135 20971520 fd Linux raid autodetect /dev/sdb2 41947136 1952468991 955260928 fd Linux raid autodetect /dev/sdb3 1952468992 1953519615 525312 82 Linux swap / Solaris Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0005b3dd Device Boot Start End Blocks Id System /dev/sda1 * 4096 41947135 20971520 fd Linux raid autodetect /dev/sda2 41947136 1952468991 955260928 fd Linux raid autodetect /dev/sda3 1952468992 1953519615 525312 82 Linux swap / Solaris Disk /dev/md2: 978.2 GB, 978187124736 bytes 2 heads, 4 sectors/track, 238815216 cylinders, total 1910521728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/md2 doesn't contain a valid partition table Disk /dev/md1: 21.5 GB, 21474770944 bytes 2 heads, 4 sectors/track, 5242864 cylinders, total 41942912 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/md1 doesn't contain a valid partition table is it possible to mount both drives to say /Home/ so I would have 2TB of usable space?

  Read the article

• Can't access my accelerated hard disk from msdos after installing linux on ssd cache

  - by Chibueze Opata

  I mistakenly installed Ubuntu on my ssd (forgot my PC actually came with one), when it detected a ~31GiB disk that it wanted to install to, I was a bit confused since I had brought out 30Gb in my primary disk for it, but I clicked continue. After installation, I tried to boot back into my Windows and it brought out some Intel Raid Disk Utility stuff saying I should disable acceleration on a disk something couldn't be found, I canceled it but whatever I tried, recovery tools, setups etc, I couldn't just access the drive which was apparently using the SSD as cache. Since then I've been stuck. I tried setting the 'raid' flag to the disk from 'gParted', still I couldn't. I tried the diskraid utility from windows recover disk, it said it couldn't detect any raid, diskpart sees the partition but doesn't see the volume, when I remove the raid flag, it sees the volume as one of raw type, and I can't access anything. I can however mount the drive from terminal in Ubuntu and access my files, but I don't have any backup media at the moment so I can do a factory re-install. Please how do I go about solving the issue, precisely I would like to know how to boot into the drive again. Thanks!

  Read the article

• Can I install new version of Ubuntu in spair RAIDed partition with unetbootin

  - by artfulrobot

  I have Ubuntu 11.04 running on my home desktop which has 2 hard drives mirrored by RAID. The drives are partitioned with a big data partition, a swap partition and a couple of 20Gb partitions for OSes, one is 11.04 which is in use, and the other is kept spare for installing a later version. Which is what I'd like to do now. The idea of a 2nd partition for new OS is that I can try it, and if it's problematic, I can boot back into the original one - the machine is shared with others, so I need it to stay available! I have had horrible problems with software RAID after using a Live USB stick - basically it messes up the internal numbering of the RAID drives or something, anyway, the result is you can't boot after using it :-( and have to spend ages re-assembling the arrays, trying to remember grub commands etc etc. Quite a shocker when you consider booting from a Live USB is supposed not to affect the existing system. As I'm installing in a RAIDed disc, I would typically use the Alternative install (sad to hear that this is going to be dropped in future). However, I think I might be able to use unetbootin to trick the system into working on top of the existing system that understands RAID, with the normal ISO? If unetbootin loads from drives that are already understood to be RAIDED, then presumably it will only see md0... instead of sda, sdb... and as long as I don't need to repartition (I don't) it should be fine, right? Or is that just plain foolishness? Please tell me before I end up with a dead system (again!)

  Read the article

• Hard time installing Ubuntu

  - by Nick

  I have a MSI GT780DXR that currently is booting windows 7. I've been trying to dual boot windows 7 and ubuntu for some time now. Here's specs that I think would make a difference Windows 7 500GB*2 RAID 0 hard drives. (Hardware RAID I'm not sure if it's a dedicated RAID card though) 7200RPM Nvidia GT570M Background: I tried to install 12.04 (64 bit) a few times but the Desktop live cd and pendrive boots with a black screen. I've tried wubi but it boots to a black screen as well. I then tried the alternative 12.04 (64 bit) and went through the installation all the way til partitioning. I let Ubuntu notice the raid setup and I setup my swap, /, and home drives, I used my free space to create the three partitions. I tried to resize the windows drive and it told me I couldn't and to be happy with my current setup. When I finally got past I got an error on installing GRUB 2 and decided to skip it and continued on to finish installation. When I tried to boot up I got an invalid partition table error. Windows recovery disc, and a GPARTED live cd couldn't find any hard drives. I ended up following advice and typed this into the recovery command prompt. bootrec /fixmbr bootrec /fixboot bootrec /rebuildBcd It worked and here I am now. The question is, how would I be able to dual boot windows 7 and Ubuntu 12.04 with this information? Thanks,

  Read the article

• Serial Port Data Structure

  - by Seth Archer

  I need to send data to a hardware device over serial port. I'm using a program called serial port tool for os x. After I connect to the device there is a form box where I can type data to send. I have no idea how to format the data. Here is an excerpt from the manual for the device. "The Net Manager Command structure consists of one start byte, one command byte, five bytes of data, and a one byte checksum. Each message packet is formatted as follows:" an example command is: Byte0=30 Byte1=7 Byte2=5 Byte3=1 Byte4=2 Byte5=0 Byte6=245 How do I type that into the form box in serial port tool? Thanks, Seth

  Read the article

• Program LED with just USB port

  - by LifeH2O

  I want to control LED with C# using only USB port. I don't want to attach any other device with USB. I just want to attach LED directly to USB port pins and program it (blink etc). How can i do that? I am new to hardware programming and it will be my first program. EDIT: I can do it already (blink LED) using printer port by attaching one led pin to data pin and other to ground. How can i do the same with USB port? My motherboard does not have a printer port. USB is the only option.

  Read the article

• If I Design a CPU Can I Get it Realized in Hardware at a Reasonable Cost?

  - by mudge

  I want to design a CPU and possibly memory and other hardware. I could do this with a hardware description language. Once I do this is it possible for me to send my designs to a manufacturer who will realize the design in hardware and send back to me the CPU(s) ? Can it be done at a reasonable cost? I want to design and make my own computer system and actually have it realized in hardware.

  Read the article

• Are there any benchmarks showing difference between hardware virtualisation enabled/disabled?

  - by Wil

  I have a 13" sub-laptop/large-netbook, it has an AMD Athlon Neo X2 L335, and I chose this one because it supports hardware virtualisation. In the end, I hardly do any virtualisation on it, however, when I do... it is fast. To my shock, I went in to the BIOS and saw that virtualisation was disabled! I turned this on and, I see no speed difference.... or at least none that I can tell. I do not have time to do a full set of benchmarks - and I run quite a bit of software on the host, so it wouldn't be scientific. I have searched quite a few places and I just can not find any benchmarks showing the difference of virtualisation bit enabled/disabled on the same hardware. Does anyone have any benchmarks they have seen that they can share? In addition, I know there was an uproar a while ago as Sony disable the hardware virtualisation on some models and only offer it in their higher models as a premium feature, however, apart from forcing an up-sell, are there any benefits to having it disabled e.g. battery/heat? I just can't find any information and can't work out why it would be disabled by default. Edit--- To add, The only thing I can find is that without it, you can not perform x64 virtualisation as fast. This is the only down side I can find. However, if this is the only difference, then I am still interested in the second part of the question - why offer the option to disable it?

  Read the article

• Device cannot be added on software-raid-1 array on Ubuntu 12.04

  - by George Pligor

  Unfortunately all tutorials I have found online until now on how to setup software-raid-1 are outdated on ubuntu 12.40 My target is to setup it on a system with a secondary disk drive that is already running. Format is not an option! I am trying to follow and adapt from 11.10 to 12.04 the following tutorial: http://www.howtoforge.com/how-to-set-up-software-raid1-on-a-running-lvm-system-incl-grub2-configuration-ubuntu-11.10-p2 On the above tutorial there is a successful command which creates a raid-1 array by setting the first disk drive with the installed system as missing: mdadm --create /dev/md0 --level=1 --raid-disks=2 missing /dev/sdb1 But when the time comes to add the first main drive with the installed system on the raid-array with this command: mdadm --add /dev/md0 /dev/sda1 I receive an error message. The error message says that the device /dev/sda is (which makes sense) busy! Note: hardware raid solution is not available since the system is a laptop with two disk drives! Thank you

  Read the article

• How to add new partition to RAID-1 array on Redhat FC10?

  - by Peter Scott

  I have a RH FC10 system with RAID 1 partitions, here is mdadm.conf: # mdadm.conf written out by anaconda DEVICE partitions MAILADDR root ARRAY /dev/md1 level=raid1 num-devices=2 metadata=0.90 UUID=9588bfe1:ddfd5858:1067c814:ac499922 ARRAY /dev/md3 level=raid1 num-devices=2 metadata=0.90 UUID=3895ca46:c1526588:d48acd7e:c153aa83 ARRAY /dev/md4 level=raid1 num-devices=2 metadata=0.90 UUID=ebd4920f:b46c1f18:2eced24a:a21ca861 ARRAY /dev/md2 level=raid1 num-devices=2 metadata=0.90 UUID=048e8198:5d6d9682:d3a1e5c3:d475ad80 ARRAY /dev/md0 level=raid1 num-devices=2 metadata=0.90 UUID=d89ec2de:079d4be5:e00ee8f5:fcb19188 I want to carve off 500MB from md4 to make a new partition (for an AFS cache). I haven't touched mdadm or any other disk partitioning tools in years. md4 is 50GB and less than 10% used. What's the easiest way of doing this?

  Read the article

• What would happen in a Software Raid 1 of one HDD and one SSD?

  - by Adrian Grigore

  Hi, I'm running my Windows 7 installation and all of my apps from an SSD for performance reasons. Since SSD's can instantly die at any moment, I'm looking for some kind of data backup strategy. Right Now I regularly backing up the drive image on a hard disk, but that only happens once per day, which is not enough for my taste. So I got an idea: What if I created a software raid 1 of the SSD and partition on my Hard disk? All data would be mirrored on both drives, making this a lot safer. But what about performance? Will Windows 7 detect that the SSD is faster than the hard drive and always read from the SSD? Or will it randomly read from both, thus reducing read performance? Thanks, Adrian Edit: I just found this article which basically answers my question. Feel free to close this post.

  Read the article

• re: 3ware raid 10 (4drive) suggested stripe size suggestions?

  - by dasko

  looked around on the site but nothing really concrete on my question. i will have about 120GB of data total, files are made up of 5MB files, excel, word and about 25 .pst files that are about 1.2GB each. Yes they use .pst over network, even though it is not recommended this is legacy setup without issue so we will continue to support this for another year or so. I need to know what you think about a stripe size of 256kb for the raid 10 based on the above requirements. I did try and bench with these settings and it seems alright without any real issue, just trying to rule out anything i might of missed. thanks.

  Read the article

• Best Dedicated Hosting with RAID 1 and managed backup

  - by Animesh

  Hi All, I run a (CentOS-powered) website currently, and we are currently planning on moving to a dedicated server. One of the essentials for us is preventing data loss with the least amount of bother. Therefore, I feel that the following features are important for us RAID 1 Managed backups by the hosting company, with at least a 7 day retention In my search for providers, I found some which provide RAID 1, but none apart from GoDaddy which provide Managed backups. 1&1 provides "FTP backup bandwidth", but I have to provide the backup location myself. Am I missing something? Are there other reputable hosting providers which can provide managed backups as part of their dedicated hosting plans? Some pointers will be much appreciated. Thanks, -A

  Read the article

• Configure Raid On Red Hat 5

  - by Sopolin

  Hi all, I have a problem with configure raid on red hat enterprise linux. The problem is when I create raid on two hard disks. It works successfully but after I remove one hard disk. It works normally. It means that I plug in one hard disk for testing configure raid. But after that I put both hard disks and create other file. The raid is cleared. My question is: Why do I turn off server machine, it clears raid that I configure first time before I turn off? Could anyone help to solve this problem? Thank, Ung Sopolin

  Read the article

• Older raid controllers in raid 5 vs. Jbod and SW raid

  - by TEB

  Hi. Im in the fortunate position to have 6 Supermicro older VOD servers with the following config: Supermicro 3U case, 3xPSU Dual Xeon 3ghz P4 class cpu (5 years old.. havnt checked the exact type) 4GB Ram 3ware 9500-8 SATA controller 8 SATA SLOTS and alot of free drives. 2GB FLASH Bootdrive What im curious about is the RAID5 performance on these old beasts in HW mode vs. SW on Linux with the controller set in JBOD mode. Im thinking on using Centos 5.5 or Ubuntu or ZFS RaidZ on Opensolaris. Any tips? or reccomendations ? best regards TEB

  Read the article

• How to add support for undocumented third party hardware controllers

  This article shows you how to reverse engineer popular proprietary undocumented third party hardware controllers so that you can add support for them in your own applications. This article focuses on how to do this for the PCDJ DAC-2 and Hercules DJ Console hardware controllers.

  Read the article

• Does anyone do hardware benchmarks on compiling code?

  - by Colen

  I've seen a bunch of sites that benchmark new hardware on gaming performance, zipping some files, encoding a movie, or whatever. Are there any that test the impact of new hardware (like SSDs, new CPUs, RAM speeds, or whatever) on compile and link speeds, either linux or windows? It'd be really good to find out what mattered the most for compile speed and be able to focus on that, instead of just extrapolating from other benchmarks.

  Read the article

• 2 HDs in RAID 1 with 2 partitions ?

  - by Prix

  Hi, i am not very familiar with raid partitons and am not even sure if this is the right place to ask about it, but i hope that if it is not that some one can point me on the right direction. This is my situation, i have 2 500 GB hds and a 3ware pci-e hardware for raid and i wanted to make a RAID 1 but i dont know if i can make more then one partition for it, for instance: MAIN HD: os partition: 100GB data partition: rest of left size and make the RAID 1 either work on all the HD or just on the data partition of it. that is on windows xp sp3 and the 3ware allows bootable raid.

  Read the article

• Partitioning with preseed help

  - by kostasp

  I have a server that has 4 hds inside all in stadalone configurations (no hardware raid). I want using preseed to create a "regular" partition on disk1 on which i ll install ubuntu and create a raid 0 array with the remainning three disks. Is this possible? Can i use partman-auto/method twice inside the preseed file once for regular and once for raid? I need to use this for unattended provisioning so i need to set my disks inside the preseed file. Thanking you all in advance for your time. Costas

  Read the article

• RAID 1 after install and two controlers

  - by jfreak53

  I have question regarding RAID 1. Can I setup software RAID 1 after having installed the first drive and setup ubuntu 12? I know that during server install and partitioning I can select RAID and setup then, but what I am not clear on is how in the world to setup RAID 1 after the fact? Can someone provide directions for this? Also, can I RAID 1 two drives one being 500GB and the mirror drive being 1TB? Of course the mirror drive would have a 500GB partition but that's my point. Lastly, can one drive be on IDE and the other on a SATA controller? I know speed will be an issue, that doesn't matter, I just need to know if it will work without corrupting data and if it's the same process? Thanks.

  Read the article

• RAID 10, how layout works ?

  - by Bastien974

  I'm trying to figure out how exactly works the RAID 10 in linux with mdadm. I want to create a RAID 10 out of 4 partitions, let's say a, b, c and d. a and b are on the array 1, c and d array 2. So what I want is to have the couple a and b, c and d in RAID 0. Then on top of that, a RAID 1. The option in the mdadm command to configure the layout is -p, --layout with option : near, far, offset see here I want to keep my data safe if the array 1 fails for example, that would mean that every chunk of data are always copied on both arrays. How do I have to set my RAID 10, near or far ?

  Read the article

• How to recover data from Dell dimension 9150 RAID 0 on another system?

  - by Adam

  I have a Dell Dimension 9150 which has failed. I'm trying to recover the data. It had two SATA 250GB drives in RAID 0 configuration. I'm trying to use a shuttle PC running Windows7 to recover the data from the drives which contained an XP boot volume. I just want the data, it doesn't have to boot. What program would I need to rebuild / interrogate the drives (one of them is failing the onboard hardware test)? What drivers would I need to install? Windows7 sees the drive as one partition but doesn't see volume information. Ubuntu can see the drive as one partition and also can tell what the drive is called, but can't access the data Any help appreciated!! :)

  Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >