Search Results

Search found 8298 results on 332 pages for 'laptop'.

Page 35/332 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

• Two screens hooked to one laptop

  - by mplacona

  Hi, I'm thinking of getting rid of my desktop, and using my (much better) laptop instead. I'm only wondering if I would be able to hook the two screens I have with it, so I'd end up with three screens. I've seen people doing it to desktops, but am not sure the same could be accomplished with a laptop. My laptop is a sony vaio, and it's got both a VGA output, and an HDMI output. It'd be great is I could simply hook two screens to it, and have three independent screens (not mirrored). on my desktop, I have pretty much the same thing, but with an extra DVI port. I connect the DVI to one screen, and the VGA to an older one. Trying to connect anything to the HDMI simply mirrors whatever is on the DVI (I've tried it a long time ago) So I was wondering if with the laptop I'd be able to do it, and end up with three independent screens. I don't know if there's anything else I could be using instead (i.e. any extra hardware), so recommendations are more than welcome. Thanks in advance, Marcos

  Read the article

• Upgrading memory in a laptop

  - by ulidtko

  I'm a bit confused about all the memory types and various bus frequencies of modern consumer PCs. Requesting expert help on the subject. So far I'm confident that: I have an Asus X51L laptop with an unknown set of configuration options. The CPU in there supports PAE, so I still have a chance to extend the memory beyond 3GiB; and the upper limit of the system is 8GiB. (?) The laptop has two SODIMM slots, one of which is occupied by a 2GiB bank, and the other one is empty. dmidecode and lshw tools consistently state 533 Mhz frequency of the bank. The last one confuses me the most. I failed to find out characteristics of the northbridge in this laptop, and still can't figure out what DDR2 to seek for. Is it DDR2-1066? Or, rather, PC2-8500/PC2-8600? Wouldn't a DDR2-800 bank harm the system's performance? Which kind of modules should I look up in stores? Update: I have bought a 2 GiB DDR2-800 SODIMM, and it seams that the system can't handle 4 GiB of memory. When installed by itself in either slot, both new and old bank (which btw happens to be marked GDDR2-677) work just perfectly; i.e. any configuration resulting in 2 GiB works. When both banks are installed though (totalling in 4 GiB), the memcheck86 tool produces horrible artifacts and crashes, and system reboots; an Ubuntu system can be started and even logged into a Unity session, but the system reboots too in this case from even a minor RAM load. So it's pretty obvious to me now that this laptop doesn't support 4 GiB of RAM or more.

  Read the article

• Trouble Downloading from some sites

  - by Fletch

  I am trying to download the new Microsoft Security Essentials but when I click on the Download button instead of getting the Download box popup nothing comes up. The progess bar at the bottom shows it doing something then when it reaches 100% nada. I can down load from HP (Drivers) and sites like Majorgeeks with no problem. I also have this problem on the Adobe download page when trying to get the shockwave and flash player. I am fixing my Granddaughters laptop that she got from someone else. There were over 26 Trojans listed on it when I installed AVG and they would not go away. I used CCleaner and HiJack This and deleted everything I could and wiped the freespace. Then ran AVG again and this time after finding a few Trojans and deleting them the system was reported as clean. IE8 then would not connect to the net so I used my computer to DL a copy and put it on the laptop, after that I was able to use the laptop to connect to the net and download a driver to get the sound working again. Laptop HP dv4000 XP Pro

  Read the article

• How to change font size on display

  - by Tim

  My laptop is Lenovo T400, whose screen size is 14.1 inches and default resolution is 1440 x 900. My main OS is Ubuntu 10.10. The default font size on the display is somehow small, which might contribute to the fatigue of my eyes. My previous laptop is Acer 5000, whose screen size is 15.4 inches and the default resolution is 1024 x 768. I like reading on my old laptop better than on my new one. Is it possible to change the setting of my new one to look like reading my old one? What are the parameters that control the font size? Are screen size, resolution part of them? In Windows, there are choices for font size, while in Ubuntu I haven't find out where I can change the setting and would like know if someone here knows about it. I also wonder if I can use a separate bigger display (perhaps just like a desktop display) as the display of my laptop, in case I don't want to enlarge font size at the cost of sacrificing the amount of the content to display, and how I shall do it? Thanks and regards!

  Read the article

• Dell Inspiron 14z laptop vs Dell inspiron 14z ultrabook

  - by Jaspreet

  Just wanted to know if both of these are fully compatible with Ubuntu? If only specific versions of Ubuntu are compatible, then which ones? http://www.dell.com/ca/p/inspiron-14z-5423/pd http://www.dell.com/ca/p/inspiron-n411z/pd Matters I am more concerned about are: 1) Affect on battery life for both? 2) Dual boot without the need to re-install Windows (don't want to use pirated copy) on a separate partition? I can definitely re-partition using partition Magic/EaseUS. 3) Also, I would not prefer keeping my OS's on SSD (in case of 14z ultra-book) It would be a great help, as I am considering to buy one of these with prime reason of Ubuntu.

  Read the article

• My laptop causes the wireless router to stop working

  - by Pier

  hello all, it's happening something strange to my wireless connection. The wireless connection works fine with all the devices at home, except with my laptop (Toshiba satellite, WIN 7 64): as I start it, the wireless network shuts off and the connection disappears also for the other devices. I can use internet only plugging the laptop with an ethernet cable, and I have to shut off the wireless card, to allow the other people in the house to use the wireless connection. I tried to update the firmware (it is a D-Link DIR 615) but it's up to date, and reconfigure the router, but all indicates that the problem is caused by my laptop. I'm currently doing an antivirus scanning, but the computer seems to be clean. Any suggestion?

  Read the article

• Re-Calibrate Toshiba battery meter with Windows 7

  - by Mark Henderson

  I have a Toshiba U300 laptop. Back in the olden days (circa-2000) you could re-calibrate the battery meter from the BIOS when your battery was no longer reading accurately. My battery was shot, so I bought a brand new one, however Windows 7 still seems to count down the battery life in at the same speed as the old one did. This time, when it alleged 0%, I turned the laptop back on and got another 90 minutes of life out of it, at 0%. Is there a tool or utility for Toshiba laptops that can fix it back to being accurate? I've read the other threads on SU about cycling the battery but that just doesn't seem to do it in this case. Update: After the last cycle, the battery meter now reads 100% but the indicator on the front of the laptop is still orange (indicating not fully charged)

  Read the article

• Why does Ubuntu reset brightness settings at the loading screen?

  - by leugim

  Since I first installed Ubuntu 11.10, I noticed that volume and screen brightness get reset every time Ubuntu starts. Why is this so? And what ways are there to keep brightness and volume levels after rebooting? I have found some scripts that change the screen-brightness at login. But this is not a good solution since login is slower because it seems to wait until the screen brightness is at the level specified by the script. After entering the password I see the screen brightness go down gradually. Only after this is complete (~1 or 2 seconds) does the background disappear and Unity come up. The screenbrightness is not remembered but instead redefined at login. So it gets remembered for the first part of the boot, then set to MAX and then again re-set to normal value by the script. My boot process is as follows: desired brightness: 2 (13,33%) / Max brightness: 15 (100%) Bios / brightness: OK GRUB (violet background color, white text) / brightness: OK Ubuntu loading screen with the dots / brightness: MAX (win7 loads with OK-brightness) User Login / brightness: MAX Unity starts / brightness: OK It seems to be more like a temporary patch than a actual solution. I'm looking for solutions that set the desired brightness permanently and consistently throughout the whole boot-process After updating to 12.04 the behavior is the same. I tried setpci -s 02:00.0 F4.B=XX The value of F4.B is always '0' regardless of what value I try to set it to (tried 0, ff, f, 5, etc) The solution in this answer does not have any noticeable effect: Desktop doesn't remember brightness settings after a reboot The variables at /sys/class/backlight/acpi_video0/ get changed if I use Fn+UP and Fn+DOWN Any help is appreciated. Thanks!

  Read the article

• Selection between two laptops for casual gaming [closed]

  - by Prabhpreet

  I have selected two laptops that meet my budget. Here are the differences: Laptop #1: 4GB Ram, Intel Core i5 2450M 2nd Gen processor w/ 2.5 Ghz clockspeed NVIDIA GeForce GT 520MX DDR3 1 GB Dedicated Graphics 750 GB SATA II Hard disk USB 2.0 Ports 6 hrs battery life Laptop #2: 4 GB Ram, Intel Core i5 3210M 3rd Gen processor w/ 2.5 Ghz clockspeed Integrated Intel HD Graphics 4000 500 GB SATA Hard disk USB 3.0 Ports 3 hrs battery life (This concerns me) First and foremost, does dedicated graphics matter for a casual gamer like me? Secondly, does the generation of the processors make a difference despite the same clockspeed. Thirdly, do usb 3.0 ports make a difference? And lastly, which laptop is more future proof? Please help me out. Thanks!

  Read the article

• Disable laptop screen

  - by Kyle

  I recently had the display fail on my Dell Inspiron E1505 laptop. I currently have my TV hooked up to the laptop's S-Video out which works fine as long as I'm running in Windows. For the first minute or so when the computer is booting I get no display. I was wondering if there was any way to disable the laptop screen entirely so that the TV display is active from the beginning (not just after Windows loads). I realize there may be a BIOS setting for this, my only problem is I can't see the BIOS settings screen since no display is active at that point so if anyone has any BIOS setting solutions I'd need the exact keystrokes to hit :)

  Read the article

• How to Turn Your Ubuntu Laptop into a Wireless Access Point

  - by Chris Hoffman

  If you have a single wired Internet connection – say, in a hotel room – you can create an ad-hoc wireless network with Ubuntu and share the Internet connection among multiple devices. Ubuntu includes an easy, graphical setup tool. Unfortunately, there are some limitations. Some devices may not support ad-hoc wireless networks and Ubuntu can only create wireless hotspots with weak WEP encryption, not strong WPA encryption. HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It HTG Explains: Learn How Websites Are Tracking You Online

  Read the article

• Why no "da-doomp" (disconnect notification sound) sometimes when unplugging wireless mouse receiver?

  - by DanH

  Sometimes (maybe one case in 3), when I unplug the wireless mouse receiver on my Sony VGN-CS215J laptop, there is no "da-doomp" sound, even after a minute or two. And if I plug the receiver back in there is no corresponding "du-dump" sound and the mouse is still (immediately) "live". This can happen when the activity light is out and there's nothing obviously going on -- it's not simply that the box is too busy. Other times one gets the expected behavior (and usually I get the correct behavior if I plug the receiver back in a few seconds and then unplug it after a "failure"). The reason this is significant is that if I get no "da-doomp" then the laptop will not sleep properly -- it will go to sleep initially, but then reawaken a few minutes later inside my laptop case and proceed to run the battery down (and no doubt overheat the unit). Any ideas?

  Read the article

• Can't boot into windows7 after installling Ubuntu-12.04 (LTS) on HP 6735s laptop 12.04

  - by Dimeji

  I installed Ubuntu-12.04 (LTS) through a USB drive and when it's done i cant load Windows 7 (Loader)(on/dev/sda1) in GRUB. When I select that, it displays a black screen and then returns to GRUB but i'm still able to boot into 12.04. Help me to solve this, I installed Boot-repair,I checked reinstall grub in the main option tab and checked place boot flag on sda1 windows7 in other options tab , re booted and it wasnt working this is was bootinfo summary http://paste.ubuntu.com/1206875/, i also tried sudo grub-install "(hd0)" sudo update-grub in the terminal and i gave me found Windows 7 (loader) on /dev/sda1 and rebooted but i still wasnt able to boot into windows 7, this is my bootinfoo summary after i typed those two commands http://pastebin.ubuntu.com/1206955/ please help me,I'm at wits end thanks Dimeji

  Read the article

• Friendly Purchase Tips - DELL INSPIRON 1501 Laptop AC Adapter

  When your Dell inspiron 1501 Series Notebook Power Supply damaged, consider few tips As here Charger consists 2 separate parts, solid block Ac adapter and Power Cable hooks to wall. sometimes it is ... [Author: Shekar Somu - Computers and Internet - March 29, 2010]

  Read the article

• How can I install CentOS without a keyboard, mouse, or monitor?

  - by user1032531

  I will be buying a new computer which will be used as a CentOS server. I will put it on my home LAN, and once it is set up, will access it only through SSH. I don't want to spend a lot of money (maybe $500), and I don't want to buy another monitor or keyboard just to through them away after the server is setup. My question is how do I access the computer without a keyboard and monitor when I install the operating system? For media, I can use either the DVD or an ISO on the USB, so am good there. But how do I see what I am doing and enter commands without a monitor or keyboard? I have a Window 7 laptop, an XP laptop, and a CentOS laptop. Can I use one of my laptops to act as the MMI (Man Machine Interface)? If not, what is the easiest and least expensive option? Thank you

  Read the article

• Smart Purchase Suggestions For DELL 1525 Laptop Computer AC Adapter

  If Dell Inspiron 1525 PA-10 Notebook Power Supply is defective, analyze few tips as stated here Replacement Charger Contains 2 pieces. solid block Charger and Detachable Cable plug into wall, someti... [Author: Sekhar Somu - Computers and Internet - March 31, 2010]

  Read the article

• After installing Win7 on my laptop I'm having trouble extending the desktop to an external monitor

  - by devoured elysium

  I have a HP TX2000 laptop and a HP w2408 screen. Yesterday, I installed Win7 and I'm having trouble having the 24 inches screen work as a secondary screen. It seems like my laptop cannot detect both screens (its own and the 24 inches one). I think I already have all the drivers installed (I ran Win7's tool to detect and automatically update drivers and it said everything was up to date!), so what might be the problem? If I connect the 24 inch screen to my laptop, it will happily show a copy of what is being shown on that big screen too, but I'd like to have it ''extend'' the desktop to the big screen, instead.

  Read the article

• wired connection not working in ubuntu 12.04 on lenovo G580 laptop

  - by shravankumar

  I found solution in http://www.zyxware.com/articles/2680/solved-wired-connection-eth0-not-detected-in-ubuntu-12-04 I downloaded compact-wireless-2012-07-03-p.tar.bz2 Here the steps i followed along with output 1. shravankumar@shravankumar-Lenovo-G580:~/Desktop/compat-wireless-2012-07-03-p$ scripts/driver-select alx Output: Processing new driver-select request... Backup exists: Makefile.bk Backup exists: Makefile.bk Backup exists: drivers/net/ethernet/broadcom/Makefile.bk Backup exists: drivers/net/ethernet/atheros/Makefile.bk Backup exists: Makefile.bk Backup exists: Makefile.bk Backup exists: drivers/net/ethernet/broadcom/Makefile.bk 2.shravankumar@shravankumar-Lenovo-G580:~/Desktop/compat-wireless-2012-07-03-p$ make output: make -C /lib/modules/3.2.0-23-generic/build M=/home/shravankumar/Desktop/compat-wireless-2012-07-03-p modules make[1]: Entering directory `/usr/src/linux-headers-3.2.0-23-generic' scripts/Makefile.build:44: /home/shravankumar/Desktop/compat-wireless-2012-07-03-p/drivers/net/ethernet/atheros/alx/Makefile: No such file or directory make[4]: *** No rule to make target `/home/shravankumar/Desktop/compat-wireless-2012-07-03-p/drivers/net/ethernet/atheros/alx/Makefile'. Stop. make[3]: *** [/home/shravankumar/Desktop/compat-wireless-2012-07-03-p/drivers/net/ethernet/atheros/alx] Error 2 make[2]: *** [/home/shravankumar/Desktop/compat-wireless-2012-07-03-p/drivers/net/ethernet/atheros] Error 2 make[1]: *** [_module_/home/shravankumar/Desktop/compat-wireless-2012-07-03-p] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.2.0-23-generic' make: *** [modules] Error 2 3. hravankumar@shravankumar-Lenovo-G580:~/Desktop/compat-wireless-2012-07-03-p$ make install output: FATAL: Could not open /lib/modules/3.2.0-23-generic/modules.dep.temp for writing: Permission denied make: *** [uninstall] Error 1 4. shravankumar@shravankumar-Lenovo-G580:~/Desktop/compat-wireless-2012-07-03-p$ modeprobe alx output: No command 'modeprobe' found, did you mean: Command 'modprobe' from package 'module-init-tools' (main) modeprobe: command not found I am new to Ubuntu ,Please help me. Thanks in advance

  Read the article

• Laptop shuts down upon waking from suspend

  - by Bryan Head

  The computer enters suspend either by closing lid, choosing suspend from the top-right drop down, or hitting the power button and pressing suspend. It doesn't matter. I then attempt to wake the computer either by opening the lid (if it was closed) or hitting the power button. Again, doesn't matter. The computer will then immediately shutdown about 50% of the time. It seems to be more likely to shut down the longer it has been on suspend. I took a snapshot of /var/log/pm-suspend.log after a successfully resume and a shutdown. The only difference (outside of timestamps of course) was that a successful resume, after reporting the success of various suspend hooks, writes: Thu Jul 5 21:36:45 PDT 2012: performing suspend Thu Jul 5 21:37:10 PDT 2012: Awake. Thu Jul 5 21:37:10 PDT 2012: Running hooks for resume and then reports successful resume hooks. When it shuts down, the log ends at "performing suspend". I diffed the two files so I know this is the only difference. Thus, it looks like it's not even trying to wake up. Would love some ideas on this one. I've scoured the web but can't seem to find anyone else running into the same issue (it seems more common that the computer shuts down upon entering suspend, or only on hitting the power button to wake, and haven't seen any that are random like mine). I'll update with any requested information.

  Read the article

• Keyboard problems on Acer Laptop

  - by artfulrobot

  The key map on my Acer Aspire 5750 keyboard has gone awry since I had the keyboard replaced (because of physical fault with one of the keys). The new keyboard looks identical, but now Ubuntu seems a little confused about which (function) buttons are which. So previously Fn+left/right were, as marked on the keys, brightness up and down; Fn+up/down were volume. It all worked as advertised! But now Page Dn (which is marked as Page Dn or Back a track with Fn) is turning the volume up, and the others fn+arrow keys don't work at all. Is there a way I can see what's happening or get it to re-map my keys? Thanks.

  Read the article

• Problem with webcam after changing camera input to my iPhone's camera [closed]

  - by andrew

  While trying to use my iPhone as a webcam I changed the paths for the camera input - now I can neither use the built-in webcam nor my iPhone's camera This is the website where I got the information from: http://www.kudanai.com/2010/11/howto-use-your-iphone-as-webcam-in.html I got stuck at the loopback part. I would just like to know how to set the path back to my built-in camera so I can at least use that. Or if there is some way to reset the camera input settings. I'm using an Inspiron 1525 running Ubuntu 12.04 LTS. memory:2.9 GiB Processor:Intel® Core™2 Duo CPU T5750 @ 2.00GHz × 2 OS type: 64-bit

  Read the article

• Notebook MSI GT640 - noisy fan - Ubuntu 11.10 x64

  - by pablo

  I have all time this issue when using Ubuntus, the fan (fans?) runs most off the time and between 60%~100% even in idle which is weird. The GPU temperatures are mostly around 80 degrees and I don't think it's right :( I always use Jupiter with power saving preset and add the line in linux default like this: quiet splash pcie_aspm=force i915.i915_enable_rc6=1 So it helps a little (fan just doesn't run all the time 100%...) What else can I do? The notebook spec is: Core i7-720 (8 threads) NVIDIA GTS250M So it's rather one of the first, not so silent and cold notebooks;), with Core i7 family and without optimus technology (as nvidia GPU is the only graphic card built-in) but anyway I don't have theese strange hot times in Windows 7.

  Read the article

• Connect work laptop (domain) to home workgroup

  - by jjeaton

  Is there an easy way to have my work laptop connect to a home workgroup for file sharing with my other PCs, but then easily switch back to connecting to my work domain when I'm at work? I have the following setup: Windows 7 Home Premium Server/HTPC 2 Windows XP laptops 1 Vista laptop (Work) The work laptop connects to a work domain, the remaining computers are on a home workgroup for sharing files/printer. Also is it possible to share files over my LAN while I'm connected to the work domain, but at home? I've tried Live Mesh, but my 2 home laptops are very slow and don't work well with it. I also use Dropbox, but I'd like to be able to share larger files. I may be missing a simple solution here...

  Read the article

• background copy large files to a laptop?

  - by Roy Pardee

  Hey All, I like to watch windows media center recorded TV files on my laptop in bed. I find thought that when the programs are in HD I have a lot of stuttering and delays--no doubt b/c of the amount of data being transferred. I actually have a fair amount of space on the laptop's hdd, and wouldn't mind moving the files onto that hard drive, where no doubt my problem would go away. But that requires some planning & time for the files to move. Is there a utility out there that would kind of 'trickle' the files over to the laptop over a long period of time, w/out soaking its bandwidth? Something like ms' BITS tech? Both machines are running win7. Many thanks! -Roy

  Read the article

• What can I do about rsync of large files killing my laptop's wifi connection

  - by David Dean

  When I run a rsync to backup my home folder over the network like so: rsync -avhz --progress --delete /home/dbdean/ [email protected]:/home/backups/david/ I seem to have problems with my quite large .VirtualBox/HardDisks/Windows XP.vdi file. Occasionally the wifi will silently fail (the transfer stops, and any other network access is broken). If I reconnect the wifi to my network before the transfer times out, it happily keeps going (and other network access is back), but I can't just leave it unattended most of the time, as I have to keep an eye on it. I'm guessing this is probably a bug in the wireless card related to a particularly high sustained volume of network usage, but I'm not really sure where to start with diagnosing this problem so that I can provide a good bug report. Or it could be something else, I guess. Any help would be appreciated. My network card is an Atheros Communications Inc. AR9285, as lspci -k shows: 43:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Hewlett-Packard Company Device 3040 Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >