Search Results

Search found 2708 results on 109 pages for 'mike duncan'.

Page 35/109 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

• Windows 7 keeps insisting that it needs to check disk for consistency, but never does

  - by Mike

  Lately Windows 7 has been telling me that I need to check disk D: for consistency. This happens more than 50% of the time when booting up. The first time, I didn't touch anything so that it would go ahead and do its scan. It didn't seem to do anything - just booted straight into Windows. The second time I tried to skip it by pressing any key. It ignored all of my keystrokes and still counted down to 0 (then skipped the disk check). Sometimes, it gets down to 0 but then just hangs... no indication that anything is going on. This is happening on a < 3 month old laptop. C: and D: are on the same physical disk - just two partitions. I never get any notification that C: needs to be checked for consistency. It's a ~300GB HD. C: has 60gb (32gb free) and D: has ~240GB (122gb free). What could be causing this to keep coming up? What can I do to fix it? Thanks!

  Read the article

• How to set the preferred network interface in linux

  - by Mike Cooper

  I have my network set up like this. http://docs.google.com/Doc?docid=0AZ1YxuLE4djaZGhqN2s1NmRfMjhjNjc0Ym1meg&hl=en In words: I have a machine (Calcium, running Arch Linux) that has two network interfaces. eth0 is hoooked up to a router, and is gigabit. Eth1 is hooked up directly to the university network over 10Megabit. The router's uplink is hooked up to the university network as well, and it is also 10Megabit. Currently (I believe) all traffic on Calcium is going through eth0, through the router, regardless of whether it is internal or external. (How can I confirm this?) Ideally, traffic that is destined for the internal network (192.168.10.0/24) would travel over eth0 to the router, and wherever it is going. ALL other traffic should go over eth1.

  Read the article

• CentOS, YUM Errors?

  - by mike

  Hi, I am using a Media Temple DV server with CentOS upon trying to install ImageMagick via yum, I get the following error: There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: /usr/lib/python2.4/site-packages/rpm/_rpmmodule.so: undefined symbol: rpmdbCheckTerminate Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is: 2.4.3 (#1, May 24 2008, 13:47:28) [GCC 4.1.2 20070626 (Red Hat 4.1.2-14)] Can anyone shed some light on what I might be able to do to fix this? Thanks!

  Read the article

• Using WinSCP with SSH server and 2 machine hops

  - by Mike

  I'm on a windows machine using putty to ssh into my schools server. From there I need to "slogin -XY machine1" and then "slogin -XY machine2" . Ideally, I'd like to use WinSCP to connect and transfer files. I know I can do this by using two copies of PuTTY , one to ssh into the server and create a proxy, and the second PuTTY to connect to the proxy and login to machine1 and create a second proxy. I can then use winSCP to connect to the proxy server and login to machine2... Is there a simpler way of doing this?

  Read the article

• 2D Animation for Mac

  - by Mike

  What software do you guys recommend for 2D animation, cartoon like, on the Mac. Please suggest something that do not requires a PhD in astrophysics to be able to use. If free, better. thanks

  Read the article

• pkgadd solaris 10 on VMWare - process datastream failed for SUNWi1cs errno=2

  - by Mike-M

  I am trying to install packadges SUNWi1cs and SUNWi15cs for Oracle 11g on Solaris 10 (VMWare Player). NO cdrom (I dont know how to mount it the iso file is on USB device), I transferd the ISO and unzip the ISO in a directory I run: "pkgadd -d /export/michel/SOLARIS_10/PRODUCT SUNi1cs" == process datastream failed ... errno=2. I've check the web without success, many answers but none that fit my prob. Thank you

  Read the article

• How can I easily test connectivity to external sources with WinHTTP?

  - by Mike B

  I've got an server application that uses Winhttp to fetch information from an external source. Occasionally, I'll need to troubleshoot connectivity issues and I'd like an easy way to test connections through winHTTP (on the off-chance that there's something that is specifically impeding winHTTP and not other unrelated connectivity commands like telnet). Does IE use WinHTTP? If not, are there any tools (preferably already integrated into Windows) that I can use? Occasionally I'll use IE but I'm not sure if that's quite the same.

  Read the article

• Moving distribution lists in Public Folders to Sharepoint Contacts?

  - by Mike

  Now I know that if I connect to contact list in Sharepoint and drag and drop everything from the Exchange Public Folder contact list to the Sharepoint Contact list (connected through Outlook) it will transfer everything in the contact list to the sharepoint contact list. What about distribution lists? Has anyone had a workaround for this? If a contact list is full of distribution lists the Contacts won't migrate over and the Sync Issues - Local Failures folder is populated with all the distribution lists that couldn't be migrated. Is there a way to migrate distribution lists? Any ideas how to set up the contact list like a contact list of distrubition lists? How would that contact list look on sharepoint? Should I just leave the contact lists that have distribution lists on public folders?

  Read the article

• How can I connect integrated webcam with virtualbox

  - by Mike Stumpf

  I am trying to use a Windows XP VM for VirtualBox on my Windows 8.1 laptop. I have tried the usual attaching USB device but I get an error saying "USB device is busy with previous request". My webcam is not active in any applications and this happens after a clean reboot of the host, the guest, and VirtualBox. Here are the details: Host -HP Pavilion 17 Notebook PC (stock) -Windows 8.1 -AMD A10-5750M APU -HP Truevision HD (integrated webcam) VM I got the VM here: http://www.modern.ie/en-us/virtualization-tools VirtualBox -VirtualBox 4.3.12 installed -VirtualBox Extension pack installed -Guest additions are installed for 4.3.12 -Enable USB Controller is checked -It does not matter if enable 2.0 controller is checked or not -It does not matter if a USB device filter is set up for the webcam or not -Here is the error message: Failed to attach the USB device DDFEQ01G45BFBV HP Truevision HD [0004] to the virtual machine IE8 - WinXP. USB device 'DDFEQ01G45BFBV HP Truevision HD' with UUID {7a2e2a45-974d-482b-9b4e-9f9abbcd0ebb} is busy with a previous request. Please try again later. Result Code: E_INVALIDARG (0x80070057) Component: HostUSBDevice Interface: IHostUSBDevice {173b4b44-d268-4334-a00d-b6521c9a740a} Callee: IConsole {8ab7c520-2442-4b66-8d74-4ff1e195d2b6} I read on some VirtualBox forums that disabling USB 2.0 support in the host BIOS solved their issue but I wanted to know if there were any other ideas before I muck around in there. Thanks

  Read the article

• Word 2013: Get the page number for the previous page

  - by Mike Anthony

  I'm trying to accomplish something very simple in Word 2013, but the feature does not seem to be available, nor can I work it out with field codes. I simply want to include, on multiple pages, "continued from page n". In terms of field codes, I have tried this: { = PAGE - 1 \* MERGEFORMAT } It just tells me that PAGE is not a defined bookmark. Is there any way that this can be done? Edit: Per documentation I found somewhere, I also tried this - but with no luck: { = { PAGE } - 1 } This just threw Syntax Error, { back, which leads me to assume that it's incompatible with newer versions of Word.

  Read the article

• Misconfigured external monitor on Mac OS X Snow Leopard 10.6.3

  - by Mike

  I have an external monitor (specifically, an HDTV) hooked up to my 2.53GHz 13" macbook pro. This display works fine and I use it with my mac in clamshell mode (eg. with an external keyboard/mouse and the laptop closed and the built-in mac screen turned off) My Mac has multiple users on it. For User A I can use the mac with the external monitor in both clamshell and dual-monitor setups. For User B, I can use the monitor in a dual-monitor setup, but whenever I switch to clamshell mode the Mac switches to an incorrect output resolution or frequency setting that my HDTV doesn't recognize, resulting in a blank screen and a message about Unsupported Resolution. Chances are I did this to myself by misconfiguring my display settings at some point in the past, but I have no idea how to undo it. I (obviously) can't seen the display to change the settings when it's borked. I can see the display settings if I switch to Dual-monitor mode, but those settings only affect the dual monitor setup; no matter how I change the settings in dual-monitor mode, the clamshell mode setup remains borked. How can I dig myself out of this hole?

  Read the article

• Does Windows performance degrade past a certain level of CPU utilization?

  - by Mike Taylor

  Is there a recommended average CPU threshold in running Windows boxes based on experience in other shops? Background: We are running with Windows Server 2003 32-bit OS. Servers are handling a major enterprise-level web application suite with a high frequency of small transactions mixed in with much larger transactions - overall average is 13ms. Our average overall CPU utilization of the Windows servers are ~60% during prime-shift. And we question at what level does the Windows OS begin to shimmy on the CPU scheduling road? Thanks.

  Read the article

• How can I find a laptop if it has a different name all over the world?

  - by Mike

  CONUNDRUM: A laptop review in the UK talks about how brilliant the "ASUS ABCDE 55" is, but in America, France, etc there is no such laptop name. In fact it's called "ASUS 12345 AB" - AAARRGH! QUESTION: Is there a way of finding out all the diverse names for the same laptop all over the world? Example: if Samsung create a R2D2500, then what is that spec laptop called in all the other countries (if they release it of course). Or if it's not released, what is their similar spec laptop called in the other countries? I understand that specs may be different, but if I read a review on my trusted UK website, but live in say Australia, I want to be able to find the name of the same laptop in Australia and then check out local places to buy it. So if anyone knows if there is a technique, specific website, or even how to use a company website to find out these annoying name changes I'd really appreciate it.

  Read the article

• Why won't dhclient use the static IP I'm telling it to request?

  - by mike

  Here's my /etc/dhcp3/dhclient.conf: request subnet-mask, broadcast-address, time-offset, routers, domain-name, domain-name-servers, domain-search, host-name, netbios-name-servers, netbios-scope, interface-mtu; timeout 60; reject 192.168.1.27; alias { interface "eth0"; fixed-address 192.168.1.222; } lease { interface "eth0"; fixed-address 192.168.1.222; option subnet-mask 255.255.255.0; option broadcast-address 255.255.255.255; option routers 192.168.1.254; option domain-name-servers 192.168.1.254; } When I run "dhclient eth0", I get this: There is already a pid file /var/run/dhclient.pid with pid 6511 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 wmaster0: unknown hardware address type 801 Listening on LPF/eth0/00:1c:25:97:82:20 Sending on LPF/eth0/00:1c:25:97:82:20 Sending on Socket/fallback DHCPREQUEST of 192.168.1.27 on eth0 to 255.255.255.255 port 67 DHCPACK of 192.168.1.27 from 192.168.1.254 bound to 192.168.1.27 -- renewal in 1468 seconds. I used strace to make sure that dhclient really is reading that conf file. Why isn't it paying attention to my "reject 192.168.1.27" and "fixed-address 192.168.1.222" lines?

  Read the article

• How to calibrate a HDTV that is being used as monitor?

  - by Mike

  I have a HDTV I am using as a second monitor. The first monitor, is a real computer monitor, not a TV and has a fantastic image. The second one, the HDTV has a good image, but it is a little bit blurred and has the problem you can see on the picture below, a kind of red halo around the edges. I think it has something to do with red contrast. Other colors show this problem too, specially the green. The problem is that the TV has no contrast adjustment. Instead it has something called IRE 10 points and IRE 2 points. Taking IRE 10 for example, it has 4 controls for each of the 10 points: luminosity, R, G and B. I could not find a page where I can understand what this IRE is and how should I adjust this. Can someone tell me how should I proceed to calibrate this TV for best picture? thanks for any help.

  Read the article

• Internet connection slower than network connection speed

  - by Mike Pateras

  I've got a computer connected to a wireless router on a different floor. When I look at the network connection, I'm told the signal strength is low, and that I've got a connection of about 26mbps (often higher). However, my internet connection on that machine is very slow. Speedtests show it at about 1-2mbps, and it really shows when loading pages and video. I have fiber optic internet access, and the machine that's connected to the router/modem via cable gets the 20mbps on speed tests, and is extremely fast in every day use. My question is, is the advertised 26mbps+ connection speed perhaps inaccurate, and that my wireless bandwidth is the likely bottleneck here? Or is the signal strength what's key here? And what might I do about this? Power cycling the router helped a bit, a speed test went as high as 6mbps after doing that.

  Read the article

• BSOD during Cygwin install

  - by Mike Pennington

  I have been running Cygwin (1.7.7) under Windows Vista 64-bit, SP2 for at least a year, and had no problems with my installation at all until today. When I tried to install apt-cyg, I realized that I needed to get the svn client. During the installation of the package dependencies, Vista threw a blue screen of death. I hoped this was a one-time occurrence, so I rebooted into Vista and tried to install svn again; same result. Next I completely removed Cygwin's directory, and all Cygwin registry entries; at this point, I tried reinstalling the base Cygwin system again. During the installation of bash, I got another BSOD: Apologies for the fuzzy pic, I had to shoot with my phone camera. I googled for BSOD and Cygwin and found a post by Dave Korn mentioning that the only reasons Cygwin should cause a BSOD is because of either ioperm.sys or some USB utilities. I have neither on my system. Every time I have tried reinstalling, Vista BSODs; I have not had problems installing any other software packages on this Vista machine. How can I get Cygwin installed again (without reinstalling Vista)?

  Read the article

• Bluetooth Headset pairs and appears in Sound Devices, but shows as Disconnected?

  - by Mike

  I recently got a TrueBlue TB-100T3 and tried pairing it with my computer (Windows 7 64-bit). At first it paired but would not appear under Sound Devices. I updated my Broadcom Bluetooth drivers here: http://www.broadcom.com/support/bluetooth/update.php Now my headset appears in both Playback and Recording, but shows as Disconnected. The device is on, paired, and appears under Device Manager as having no problems. I right-clicked and installed both the Hands-free Telephony and Headset services. Here is an image: http://i.stack.imgur.com/vG2S7.png Right-clicking the device and selecting Connect does nothing. Does anyone have a solution? Thanks!

  Read the article

• Setting password expiration settings on CentOS

  - by Mike Barnett

  How does one set the password expiration parameters on CentOS or Red Hat Linux using PAM? Specifically, I need to set the following: Maximum number of days that a password may be used. Minimum number of days allowed between password changes.

  Read the article

• Firefox or Chrome - how to force a specific encoding for a page

  - by Mike

  Hi, I am accessing an intranet site built by amateurs, that was constructed to be "best viewed by IE" (arghhh!). The site is in portuguese. All accented letters are jammed and do not appear as they should. As I create sites myself, I know that the best way to build a site in portuguese and other latin languages is to use the "charset=iso-8859-1" on the page's HTML encoding. This will ensure cross-browser and platforms compatibility. But I have no way to change this, because I am a visitor on this site. I don't know the encoding they are using. What I ask is: is there a way I can force my browser (Chrome or Firefox) to recode the page using the correct charset? I need this to work on Ubuntu.

  Read the article

• MacBook Pro screen goes dark

  - by Mike M

  I've had my MacBook Pro for two years now...no problems (it has had 3rd party RAM from the get go). Today, I'm copying a particularly large VM from an External disk drive to local MacBook disk. It has about 3GB to go and I take off to do some other things and when I come back my screen is "dark". The computer is still on but I can't see anything. I forced a reboot by holding down the power button, it starts up with the "chimes", but still no screen. I've done this several times. Any ideas? Do you think the hard disk activity caused it to get too hot?

  Read the article

• OS/X Mavericks won't download in App Store

  - by Mike Christensen

  I tried to download OS/X Mavericks through the App Store yesterday. However, I had to leave work before it was done downloading and shut down the machine while it was downloading. I assumed I'd be able to resume the download, or start over again later. However, now there's no way to get it to download again. When I find OS/X Mavericks in the store, I click on the "Download" link. It asks for my Apple ID which I enter, and it does absolutely nothing. It doesn't begin downloading, and it just still shows the "Download" button. Clicking on it again does nothing. I'm thinking there's something stuck somewhere, like some flag that says this download is in progress or it has already been downloaded. Is there some way to clear that out so I can start downloading it again?

  Read the article

• Disable XP disk check using FAT32

  - by mike xie

  Right now I'm using Windows XP and Macintosh on my MacBook Pro via Bootcamp. Sometimes my XP would crash and when I restarted it it would have to go through disk check, although it says I can skip it by pushing a key, but this never worked for me. I did a bit of research online on how to disable disk check and found chkntfs /x c: but when I tried this out in my cmd it said the disk is FAT32 format. I tried to convert my C: drive from FAT32 to NTFS by using convert c: /FS:NTFS but when I tried this it told me to locate my C: drive. I tried to type C: and Bootcamp but couldn't really get past it. I later saw someone said to use this: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager] "AutoChkTimeOut"=dword:0000000 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager] "BootExecute"=hex(7):61,00,75,00,74,00,6f,00,63,00,68,00,65,00,63,00,6b,00,20,\ 00,61,00,75,00,74,00,6f,00,63,00,68,00,6b,00,20,00,2a,00,00,00,00,00 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] "SFCScan"=dword:00000000 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\cleanuppath] @=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\ 00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,63,00,6c,00,\ 65,00,61,00,6e,00,6d,00,67,00,72,00,2e,00,65,00,78,00,65,00,20,00,2f,00,44,\ 00,20,00,25,00,63,00,00,00 (Save it as .reg and execute it) I have just tried running it but am not really sure if it did anything (my laptop hasn't crashed yet :) ) Firstly, I am wondering if someone can tell me how to check if that script worked? Secondly, if that script didn't work, does anyone have any solution for these problems? Is there another way to disable disk check or is there another way for me to change my FAT32 to NTFS?

  Read the article

• rsyslog - template - regex data for insertion into db

  - by Mike Purcell

  I've been googling around the last few days looking for a solid example of how to regex a log entry for desired data, which is then to be inserted into a database, but apparently my google-fu is lacking. What I am trying to do is track when an email is sent, and then track the remote mta response, specifically the dsn code. At this point I have two templates setup for each situation: # /etc/rsyslog.conf ... $Template tpl_custom_header, "MPurcell: CUSTOM HEADER Template: %msg%\n" $Template tpl_response_dsn, "MPurcell: RESPONSE DSN Template: %msg%\n" # /etc/rsyslog.d/mail if $programname == 'mail-myapp' then /var/log/mail/myapp.log if ($programname == 'mail-myapp') and ($msg contains 'X-custom_header') then /var/log/mail/test.log;tpl_custom_header if ($programname == 'mail-myapp') and ($msg contains 'dsn=') then /var/log/mail/test.log;tpl_response_dsn & ~ Example log entries: MPurcell: CUSTOM HEADER Template: D921940A1A: prepend: header X-custom_header: 101 from localhost[127.0.0.1]; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<localhost>: headername: message-id MPurcell: RESPONSE DSN Template: D921940A1A: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[2607:f8b0:400e:c02::1a]:25, delay=2, delays=0.12/0.01/0.82/1.1, dsn=2.0.0, status=sent (250 2.0.0 OK 1372378600 o4si2828280pac.279 - gsmtp) From the CUSTOM HEADER Template I would like to extract: D921940A1A, and X-custom_header value; 101 From the RESPONSE DSN Template I would like to extract: D921940A1A, and "dsn=2.0.0"

  Read the article

• How to assign a keyboard shortcut to a specific New Window template in Terminal.app?

  - by Mike

  I have a template set up in Snow Leopard's Terminal.app to create a new window or tab with my preferred emulation settings for a particular host that I use. I'd like to assign a keyboard shortcut to that template so that I can quickly create a new window with those settings. I tried using the Keyboard Shortcuts System Preference pane to do it. I can assign the shortcut key to the MyTemplate submenu, but it doesn't work when I try to use it. I suspect because the MyTemplate is listed in multiple submenus -- one for New Window and one for New Tab. How can I assign a keyboard shortcut to my new fancy template? PS. I do NOT wish to change my default (cmd-N) template.

  Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >